diff options
| author | Felix Fietkau <nbd@nbd.name> | 2018-07-04 19:41:26 +0200 |
|---|---|---|
| committer | Felix Fietkau <nbd@nbd.name> | 2018-07-07 14:53:26 +0200 |
| commit | c3bdb89e61084278a598d5af15da274cada1ecc6 (patch) | |
| tree | b2c6e079000d62a03afe8175256082e5f2d56eed | |
| parent | 1e6c30690ca902a69a727c925afaeccae8f85bcd (diff) | |
| download | upstream-c3bdb89e61084278a598d5af15da274cada1ecc6.tar.gz upstream-c3bdb89e61084278a598d5af15da274cada1ecc6.tar.bz2 upstream-c3bdb89e61084278a598d5af15da274cada1ecc6.zip | |
kernel: remove linux 4.4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
269 files changed, 0 insertions, 42118 deletions
diff --git a/target/linux/generic/config-4.4 b/target/linux/generic/config-4.4 deleted file mode 100644 index d29f27d747..0000000000 --- a/target/linux/generic/config-4.4 +++ /dev/null @@ -1,4857 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_6LOWPAN is not set -# CONFIG_6PACK is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_9P_FS is not set -# CONFIG_AB3100_CORE is not set -# CONFIG_AB8500_CORE is not set -# CONFIG_ABX500_CORE is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_ACENIC is not set -# CONFIG_ACERHDF is not set -# CONFIG_ACORN_PARTITION is not set -# CONFIG_ACPI_ALS is not set -# CONFIG_ACPI_APEI is not set -# CONFIG_ACPI_BUTTON is not set -# CONFIG_ACPI_CUSTOM_METHOD is not set -# CONFIG_ACPI_EXTLOG is not set -# CONFIG_ACPI_HED is not set -# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set -# CONFIG_AD2S1200 is not set -# CONFIG_AD2S1210 is not set -# CONFIG_AD2S90 is not set -# CONFIG_AD5064 is not set -# CONFIG_AD525X_DPOT is not set -# CONFIG_AD5360 is not set -# CONFIG_AD5380 is not set -# CONFIG_AD5421 is not set -# CONFIG_AD5446 is not set -# CONFIG_AD5449 is not set -# CONFIG_AD5504 is not set -# CONFIG_AD5624R_SPI is not set -# CONFIG_AD5686 is not set -# CONFIG_AD5755 is not set -# CONFIG_AD5764 is not set -# CONFIG_AD5791 is not set -# CONFIG_AD5933 is not set -# CONFIG_AD7150 is not set -# CONFIG_AD7152 is not set -# CONFIG_AD7192 is not set -# CONFIG_AD7266 is not set -# CONFIG_AD7280 is not set -# CONFIG_AD7291 is not set -# CONFIG_AD7298 is not set -# CONFIG_AD7303 is not set -# CONFIG_AD7476 is not set -# CONFIG_AD7606 is not set -# CONFIG_AD7746 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7791 is not set -# CONFIG_AD7793 is not set -# CONFIG_AD7816 is not set -# CONFIG_AD7887 is not set -# CONFIG_AD7923 is not set -# CONFIG_AD799X is not set -# CONFIG_AD8366 is not set -# CONFIG_AD9523 is not set -# CONFIG_AD9832 is not set -# CONFIG_AD9834 is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_ADE7753 is not set -# CONFIG_ADE7754 is not set -# CONFIG_ADE7758 is not set -# CONFIG_ADE7759 is not set -# CONFIG_ADE7854 is not set -# CONFIG_ADF4350 is not set -# CONFIG_ADFS_FS is not set -# CONFIG_ADIS16060 is not set -# CONFIG_ADIS16080 is not set -# CONFIG_ADIS16130 is not set -# CONFIG_ADIS16136 is not set -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16203 is not set -# CONFIG_ADIS16204 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADIS16220 is not set -# CONFIG_ADIS16240 is not set -# CONFIG_ADIS16260 is not set -# CONFIG_ADIS16400 is not set -# CONFIG_ADIS16480 is not set -# CONFIG_ADJD_S311 is not set -# CONFIG_ADM6996_PHY is not set -# CONFIG_ADM8211 is not set -# CONFIG_ADT7316 is not set -CONFIG_ADVISE_SYSCALLS=y -# CONFIG_ADXRS450 is not set -CONFIG_AEABI=y -# CONFIG_AFFS_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_AGP is not set -# CONFIG_AHCI_CEVA is not set -# CONFIG_AHCI_IMX is not set -# CONFIG_AHCI_MVEBU is not set -# CONFIG_AHCI_QORIQ is not set -CONFIG_AIO=y -# CONFIG_AIRO is not set -# CONFIG_AIRO_CS is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_AK09911 is not set -# CONFIG_AK8975 is not set -# CONFIG_AL3320A is not set -# CONFIG_ALIM7101_WDT is not set -CONFIG_ALLOW_DEV_COREDUMP=y -# CONFIG_ALTERA_MBOX is not set -# CONFIG_ALTERA_STAPL is not set -# CONFIG_ALTERA_TSE is not set -# CONFIG_ALX is not set -# CONFIG_AM335X_PHY_USB is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_AMD_PHY is not set -# CONFIG_AMD_XGBE is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_AMILO_RFKILL is not set -# CONFIG_ANDROID is not set -CONFIG_ANON_INODES=y -# CONFIG_APDS9300 is not set -# CONFIG_APDS9802ALS is not set -# CONFIG_APDS9960 is not set -# CONFIG_APM8018X is not set -# CONFIG_APPLE_GMUX is not set -# CONFIG_APPLICOM is not set -# CONFIG_AQUANTIA_PHY is not set -# CONFIG_AR5523 is not set -# CONFIG_AR7 is not set -# CONFIG_AR8216_PHY is not set -# CONFIG_AR8216_PHY_LEDS is not set -# CONFIG_ARCH_ALPINE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_BCM is not set -# CONFIG_ARCH_BCM2835 is not set -# CONFIG_ARCH_BERLIN is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CNS3XXX is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_DIGICOLOR is not set -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_EXYNOS is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_HI3xxx is not set -# CONFIG_ARCH_HIGHBANK is not set -# CONFIG_ARCH_HISI is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_KEYSTONE is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_LPC32XX is not set -# CONFIG_ARCH_MEDIATEK is not set -# CONFIG_ARCH_MESON is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_MULTIPLATFORM is not set -# CONFIG_ARCH_MULTI_V6 is not set -# CONFIG_ARCH_MULTI_V7 is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MVEBU is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_MXS is not set -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_NOMADIK is not set -# CONFIG_ARCH_NSPIRE is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_OMAP1 is not set -# CONFIG_ARCH_OMAP2PLUS is not set -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_ARCH_OMAP4 is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -# CONFIG_ARCH_PICOXCELL is not set -# CONFIG_ARCH_PRIMA2 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_QCOM is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_ROCKCHIP is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_SHMOBILE is not set -# CONFIG_ARCH_SHMOBILE_MULTI is not set -# CONFIG_ARCH_SIRF is not set -# CONFIG_ARCH_SOCFPGA is not set -# CONFIG_ARCH_STI is not set -# CONFIG_ARCH_SUNXI is not set -# CONFIG_ARCH_TEGRA is not set -# CONFIG_ARCH_U300 is not set -# CONFIG_ARCH_U8500 is not set -# CONFIG_ARCH_UNIPHIER is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_VEXPRESS is not set -# CONFIG_ARCH_VIRT is not set -# CONFIG_ARCH_VT8500 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_WM8505 is not set -# CONFIG_ARCH_WM8850 is not set -# CONFIG_ARCH_ZX is not set -# CONFIG_ARCH_ZYNQ is not set -# CONFIG_ARCNET is not set -# CONFIG_ARC_EMAC is not set -# CONFIG_ARM64_ERRATUM_819472 is not set -# CONFIG_ARM64_ERRATUM_824069 is not set -# CONFIG_ARM64_ERRATUM_826319 is not set -# CONFIG_ARM64_ERRATUM_827319 is not set -# CONFIG_ARM64_ERRATUM_832075 is not set -# CONFIG_ARM64_ERRATUM_834220 is not set -# CONFIG_ARM64_ERRATUM_843419 is not set -# CONFIG_ARM64_ERRATUM_845719 is not set -# CONFIG_ARM_APPENDED_DTB is not set -# CONFIG_ARM_ARCH_TIMER is not set -# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set -# CONFIG_ARM_CCI is not set -# CONFIG_ARM_CCI400_PMU is not set -# CONFIG_ARM_CCI500_PMU is not set -# CONFIG_ARM_CCN is not set -# CONFIG_ARM_CPUIDLE is not set -CONFIG_ARM_CPU_TOPOLOGY=y -# CONFIG_ARM_CRYPTO is not set -CONFIG_ARM_DMA_MEM_BUFFERABLE=y -# CONFIG_ARM_ERRATA_326103 is not set -# CONFIG_ARM_ERRATA_364296 is not set -# CONFIG_ARM_ERRATA_411920 is not set -# CONFIG_ARM_ERRATA_430973 is not set -# CONFIG_ARM_ERRATA_458693 is not set -# CONFIG_ARM_ERRATA_460075 is not set -# CONFIG_ARM_ERRATA_643719 is not set -# CONFIG_ARM_ERRATA_720789 is not set -# CONFIG_ARM_ERRATA_742230 is not set -# CONFIG_ARM_ERRATA_742231 is not set -# CONFIG_ARM_ERRATA_743622 is not set -# CONFIG_ARM_ERRATA_751472 is not set -# CONFIG_ARM_ERRATA_754322 is not set -# CONFIG_ARM_ERRATA_754327 is not set -# CONFIG_ARM_ERRATA_764369 is not set -# CONFIG_ARM_ERRATA_773022 is not set -# CONFIG_ARM_ERRATA_775420 is not set -# CONFIG_ARM_ERRATA_798181 is not set -# CONFIG_ARM_KERNMEM_PERMS is not set -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set -# CONFIG_ARM_KPROBES_TEST is not set -# CONFIG_ARM_MHU is not set -# CONFIG_ARM_MODULE_PLTS is not set -# CONFIG_ARM_PATCH_PHYS_VIRT is not set -# CONFIG_ARM_PSCI is not set -# CONFIG_ARM_PTDUMP is not set -# CONFIG_ARM_TIMER_SP804 is not set -# CONFIG_ARM_UNWIND is not set -# CONFIG_ARM_VIRT_EXT is not set -# CONFIG_AS3935 is not set -# CONFIG_ASM9260_TIMER is not set -# CONFIG_ASUS_LAPTOP is not set -# CONFIG_ASYMMETRIC_KEY_TYPE is not set -# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_ASYNC_TX_DMA is not set -# CONFIG_AT76C50X_USB is not set -# CONFIG_AT803X_PHY is not set -# CONFIG_ATA is not set -# CONFIG_ATAGS is not set -CONFIG_ATAGS_PROC=y -# CONFIG_ATALK is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_ATA_ACPI is not set -CONFIG_ATA_BMDMA=y -# CONFIG_ATA_GENERIC is not set -# CONFIG_ATA_NONSTANDARD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_ATA_PIIX is not set -CONFIG_ATA_SFF=y -# CONFIG_ATA_VERBOSE_ERROR is not set -# CONFIG_ATH10K is not set -# CONFIG_ATH25 is not set -# CONFIG_ATH5K is not set -# CONFIG_ATH6KL is not set -# CONFIG_ATH79 is not set -# CONFIG_ATH9K is not set -# CONFIG_ATH9K_HTC is not set -# CONFIG_ATH_DEBUG is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1C is not set -# CONFIG_ATL1E is not set -# CONFIG_ATL2 is not set -# CONFIG_ATM is not set -# CONFIG_ATMEL is not set -# CONFIG_ATMEL_PIT is not set -# CONFIG_ATMEL_SSC is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_BR2684 is not set -CONFIG_ATM_BR2684_IPFILTER=y -# CONFIG_ATM_CLIP is not set -CONFIG_ATM_CLIP_NO_ICMP=y -# CONFIG_ATM_DRIVERS is not set -# CONFIG_ATM_DUMMY is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_FORE200E is not set -# CONFIG_ATM_HE is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_LANE is not set -# CONFIG_ATM_MPOA is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_SOLOS is not set -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ATP is not set -# CONFIG_AUDIT is not set -# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set -# CONFIG_AURORA_NB8800 is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_AUTO_ZRELADDR is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_AX25 is not set -# CONFIG_AX25_DAMA_SLAVE is not set -# CONFIG_AX88796 is not set -# CONFIG_AXP288_ADC is not set -# CONFIG_AXP288_FUEL_GAUGE is not set -# CONFIG_B43 is not set -# CONFIG_B43LEGACY is not set -# CONFIG_B44 is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_BACKLIGHT_GPIO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -# CONFIG_BACKLIGHT_LP855X is not set -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_PANDORA is not set -# CONFIG_BACKLIGHT_PM8941_WLED is not set -# CONFIG_BACKLIGHT_RPI is not set -# CONFIG_BACKLIGHT_SAHARA is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -CONFIG_BASE_FULL=y -CONFIG_BASE_SMALL=0 -# CONFIG_BATMAN_ADV is not set -# CONFIG_BATTERY_BQ27XXX is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2781 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_GAUGE_LTC2941 is not set -# CONFIG_BATTERY_GOLDFISH is not set -# CONFIG_BATTERY_MAX17040 is not set -# CONFIG_BATTERY_MAX17042 is not set -# CONFIG_BATTERY_SBS is not set -# CONFIG_BAYCOM_EPP is not set -# CONFIG_BAYCOM_PAR is not set -# CONFIG_BAYCOM_SER_FDX is not set -# CONFIG_BAYCOM_SER_HDX is not set -# CONFIG_BCACHE is not set -# CONFIG_BCM47XX is not set -# CONFIG_BCM63XX is not set -# CONFIG_BCM63XX_PHY is not set -# CONFIG_BCM7038_WDT is not set -# CONFIG_BCM7XXX_PHY is not set -# CONFIG_BCM87XX_PHY is not set -# CONFIG_BCMA is not set -# CONFIG_BCMA_DRIVER_GPIO is not set -CONFIG_BCMA_POSSIBLE=y -# CONFIG_BCMGENET is not set -# CONFIG_BCM_KONA_USB2_PHY is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_BE2ISCSI is not set -# CONFIG_BE2NET is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_BGMAC is not set -# CONFIG_BH1750 is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_BIG_LITTLE is not set -# CONFIG_BINARY_PRINTF is not set -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_BINFMT_SCRIPT=y -CONFIG_BITREVERSE=y -# CONFIG_BLK_CMDLINE_PARSER is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_CPQ_DA is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_BLK_DEV_4DRIVES is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI14XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_BSGLIB is not set -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_CS5536 is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_DELKIN is not set -# CONFIG_BLK_DEV_DRBD is not set -# CONFIG_BLK_DEV_DTC2278 is not set -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_HT6560B is not set -# CONFIG_BLK_DEV_IDEACPI is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_BLK_DEV_IDEPNP is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDE_AU1XXX is not set -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_INITRD=y -# CONFIG_BLK_DEV_INTEGRITY is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_IT8172 is not set -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_NULL_BLK is not set -# CONFIG_BLK_DEV_NVME is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_BLK_DEV_PMEM is not set -# CONFIG_BLK_DEV_QD65XX is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_RBD is not set -# CONFIG_BLK_DEV_RSXX is not set -# CONFIG_BLK_DEV_RZ1000 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_SD is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SKD is not set -# CONFIG_BLK_DEV_SL82C105 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_BLK_DEV_THROTTLING is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_UMC8672 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLOCK=y -# CONFIG_BMA180 is not set -# CONFIG_BMC150_ACCEL is not set -# CONFIG_BMC150_MAGN is not set -# CONFIG_BMG160 is not set -# CONFIG_BMIPS_GENERIC is not set -# CONFIG_BMP085 is not set -# CONFIG_BMP085_I2C is not set -# CONFIG_BMP085_SPI is not set -# CONFIG_BMP280 is not set -# CONFIG_BNA is not set -# CONFIG_BNX2 is not set -# CONFIG_BNX2X is not set -# CONFIG_BNXT is not set -# CONFIG_BONDING is not set -# CONFIG_BOOKE_WDT is not set -CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3 -# CONFIG_BOOT_PRINTK_DELAY is not set -CONFIG_BOOT_RAW=y -CONFIG_BPF=y -# CONFIG_BPF_JIT is not set -CONFIG_BPF_SYSCALL=y -# CONFIG_BPQETHER is not set -CONFIG_BQL=y -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_BRCMFMAC is not set -# CONFIG_BRCMSMAC is not set -# CONFIG_BRCMSTB_GISB_ARB is not set -CONFIG_BRIDGE=y -# CONFIG_BRIDGE_EBT_802_3 is not set -# CONFIG_BRIDGE_EBT_AMONG is not set -# CONFIG_BRIDGE_EBT_ARP is not set -# CONFIG_BRIDGE_EBT_ARPREPLY is not set -# CONFIG_BRIDGE_EBT_BROUTE is not set -# CONFIG_BRIDGE_EBT_DNAT is not set -# CONFIG_BRIDGE_EBT_IP is not set -# CONFIG_BRIDGE_EBT_IP6 is not set -# CONFIG_BRIDGE_EBT_LIMIT is not set -# CONFIG_BRIDGE_EBT_LOG is not set -# CONFIG_BRIDGE_EBT_MARK is not set -# CONFIG_BRIDGE_EBT_MARK_T is not set -# CONFIG_BRIDGE_EBT_NFLOG is not set -# CONFIG_BRIDGE_EBT_PKTTYPE is not set -# CONFIG_BRIDGE_EBT_REDIRECT is not set -# CONFIG_BRIDGE_EBT_SNAT is not set -# CONFIG_BRIDGE_EBT_STP is not set -# CONFIG_BRIDGE_EBT_T_FILTER is not set -# CONFIG_BRIDGE_EBT_T_NAT is not set -# CONFIG_BRIDGE_EBT_VLAN is not set -CONFIG_BRIDGE_IGMP_SNOOPING=y -# CONFIG_BRIDGE_NETFILTER is not set -# CONFIG_BRIDGE_NF_EBTABLES is not set -# CONFIG_BRIDGE_VLAN_FILTERING is not set -# CONFIG_BROADCOM_PHY is not set -CONFIG_BROKEN_ON_SMP=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_BT is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_BTRFS_FS_POSIX_ACL is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BT_ATH3K is not set -# CONFIG_BT_BNEP is not set -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_BREDR is not set -# CONFIG_BT_CMTP is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIBLUECARD is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBT3C is not set -# CONFIG_BT_HCIBTSDIO is not set -# CONFIG_BT_HCIBTUART is not set -# CONFIG_BT_HCIBTUSB is not set -# CONFIG_BT_HCIBTUSB_RTL is not set -# CONFIG_BT_HCIDTL1 is not set -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIUART_3WIRE is not set -# CONFIG_BT_HCIUART_ATH3K is not set -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_LL is not set -# CONFIG_BT_HCIUART_QCA is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_BT_HIDP is not set -# CONFIG_BT_HS is not set -# CONFIG_BT_LE is not set -# CONFIG_BT_MRVL is not set -# CONFIG_BT_RFCOMM is not set -CONFIG_BT_RFCOMM_TTY=y -# CONFIG_BT_SELFTEST is not set -CONFIG_BUG=y -CONFIG_BUILDTIME_EXTABLE_SORT=y -# CONFIG_BUILD_BIN2C is not set -# CONFIG_C2PORT is not set -# CONFIG_CADENCE_WATCHDOG is not set -# CONFIG_CAIF is not set -# CONFIG_CAN is not set -# CONFIG_CAN_BCM is not set -# CONFIG_CAN_DEBUG_DEVICES is not set -# CONFIG_CAN_DEV is not set -# CONFIG_CAN_GS_USB is not set -# CONFIG_CAN_GW is not set -# CONFIG_CAN_M_CAN is not set -# CONFIG_CAN_RAW is not set -# CONFIG_CAN_RCAR is not set -# CONFIG_CAN_SLCAN is not set -# CONFIG_CAN_SUN4I is not set -# CONFIG_CAN_VCAN is not set -# CONFIG_CAPI_AVM is not set -# CONFIG_CAPI_EICON is not set -# CONFIG_CAPI_TRACE is not set -CONFIG_CARDBUS=y -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_CARL9170 is not set -# CONFIG_CASSINI is not set -# CONFIG_CAVIUM_ERRATUM_22375 is not set -# CONFIG_CAVIUM_ERRATUM_23144 is not set -# CONFIG_CAVIUM_ERRATUM_23154 is not set -# CONFIG_CAVIUM_ERRATUM_27456 is not set -# CONFIG_CAVIUM_OCTEON_SOC is not set -# CONFIG_CB710_CORE is not set -# CONFIG_CC10001_ADC is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_CC_STACKPROTECTOR is not set -CONFIG_CC_STACKPROTECTOR_NONE=y -# CONFIG_CC_STACKPROTECTOR_REGULAR is not set -# CONFIG_CC_STACKPROTECTOR_STRONG is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_CEPH_FS is not set -# CONFIG_CEPH_LIB is not set -# CONFIG_CFG80211 is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -# CONFIG_CGROUPS is not set -# CONFIG_CGROUP_DEBUG is not set -# CONFIG_CGROUP_NET_PRIO is not set -# CONFIG_CHARGER_BQ2415X is not set -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_BQ24257 is not set -# CONFIG_CHARGER_BQ24735 is not set -# CONFIG_CHARGER_BQ25890 is not set -# CONFIG_CHARGER_GPIO is not set -# CONFIG_CHARGER_ISP1704 is not set -# CONFIG_CHARGER_LP8727 is not set -# CONFIG_CHARGER_MANAGER is not set -# CONFIG_CHARGER_MAX8903 is not set -# CONFIG_CHARGER_RT9455 is not set -# CONFIG_CHARGER_SMB347 is not set -# CONFIG_CHARGER_TWL4030 is not set -# CONFIG_CHECKPOINT_RESTORE is not set -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_CHELSIO_T4 is not set -# CONFIG_CHELSIO_T4VF is not set -# CONFIG_CHROME_PLATFORMS is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_CHR_DEV_SCH is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_CIFS is not set -# CONFIG_CIFS_ACL is not set -# CONFIG_CIFS_DEBUG is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_FSCACHE is not set -# CONFIG_CIFS_NFSD_EXPORT is not set -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_SMB2 is not set -CONFIG_CIFS_STATS=y -# CONFIG_CIFS_STATS2 is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CLEANCACHE is not set -# CONFIG_CLKSRC_VERSATILE is not set -# CONFIG_CLK_QORIQ is not set -# CONFIG_CLOCK_THERMAL is not set -CONFIG_CLS_U32_MARK=y -# CONFIG_CLS_U32_PERF is not set -# CONFIG_CM32181 is not set -# CONFIG_CM3232 is not set -# CONFIG_CM3323 is not set -# CONFIG_CM36651 is not set -# CONFIG_CMA is not set -CONFIG_CMDLINE="" -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_CMDLINE_EXTEND is not set -# CONFIG_CMDLINE_FORCE is not set -# CONFIG_CMDLINE_FROM_BOOTLOADER is not set -# CONFIG_CMDLINE_PARTITION is not set -# CONFIG_CNIC is not set -# CONFIG_CODA_FS is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_COMEDI is not set -# CONFIG_COMMON_CLK_CDCE706 is not set -# CONFIG_COMMON_CLK_CDCE925 is not set -# CONFIG_COMMON_CLK_IPROC is not set -# CONFIG_COMMON_CLK_PWM is not set -# CONFIG_COMMON_CLK_PXA is not set -# CONFIG_COMMON_CLK_QCOM is not set -# CONFIG_COMMON_CLK_SI514 is not set -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI570 is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set -# CONFIG_COMPACTION is not set -# CONFIG_COMPAL_LAPTOP is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_COMPILE_TEST is not set -# CONFIG_CONFIGFS_FS is not set -# CONFIG_CONNECTOR is not set -CONFIG_CONSTRUCTORS=y -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_COPS is not set -# CONFIG_CORDIC is not set -# CONFIG_COREDUMP is not set -# CONFIG_CORESIGHT is not set -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_CPA_DEBUG is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -# CONFIG_CPU_IDLE is not set -# CONFIG_CPU_IDLE_GOV_MENU is not set -# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set -CONFIG_CPU_SW_DOMAIN_PAN=y -# CONFIG_CRAMFS is not set -CONFIG_CRASHLOG=y -# CONFIG_CRASH_DUMP is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_CRC32_BIT is not set -CONFIG_CRC32_SARWATE=y -# CONFIG_CRC32_SELFTEST is not set -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SLICEBY8 is not set -# CONFIG_CRC7 is not set -# CONFIG_CRC8 is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC_T10DIF is not set -CONFIG_CROSS_COMPILE="" -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_842 is not set -# CONFIG_CRYPTO_AEAD is not set -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_586 is not set -# CONFIG_CRYPTO_AES_ARM is not set -# CONFIG_CRYPTO_AES_ARM_BS is not set -# CONFIG_CRYPTO_AES_NI_INTEL is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_ARC4=y -# CONFIG_CRYPTO_AUTHENC is not set -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CHACHA20 is not set -# CONFIG_CRYPTO_CHACHA20POLY1305 is not set -# CONFIG_CRYPTO_CMAC is not set -# CONFIG_CRYPTO_CRC32 is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CRC32C_INTEL is not set -# CONFIG_CRYPTO_CRCT10DIF is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_DEV_ATMEL_AES is not set -# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set -# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set -# CONFIG_CRYPTO_DEV_CCP is not set -# CONFIG_CRYPTO_DEV_FSL_CAAM is not set -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set -# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set -# CONFIG_CRYPTO_DEV_MV_CESA is not set -# CONFIG_CRYPTO_DEV_MXS_DCP is not set -# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set -# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set -# CONFIG_CRYPTO_DEV_QCE is not set -# CONFIG_CRYPTO_DEV_SAHARA is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set -# CONFIG_CRYPTO_DRBG_CTR is not set -# CONFIG_CRYPTO_DRBG_HASH is not set -# CONFIG_CRYPTO_DRBG_MENU is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_ECHAINIV is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set -# CONFIG_CRYPTO_HASH is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_CRYPTO_JITTERENTROPY is not set -# CONFIG_CRYPTO_KEYWRAP is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_LZ4 is not set -# CONFIG_CRYPTO_LZ4HC is not set -# CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -# CONFIG_CRYPTO_MCRYPTD is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_PCOMP is not set -# CONFIG_CRYPTO_PCOMP2 is not set -CONFIG_CRYPTO_PCRYPT=y -# CONFIG_CRYPTO_POLY1305 is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_RNG is not set -# CONFIG_CRYPTO_RSA is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SALSA20_586 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SEQIV is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA1_ARM is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_TWOFISH_586 is not set -# CONFIG_CRYPTO_TWOFISH_COMMON is not set -# CONFIG_CRYPTO_USER is not set -# CONFIG_CRYPTO_USER_API_AEAD is not set -# CONFIG_CRYPTO_USER_API_HASH is not set -# CONFIG_CRYPTO_USER_API_RNG is not set -# CONFIG_CRYPTO_USER_API_SKCIPHER is not set -# CONFIG_CRYPTO_VMAC is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CS5535_MFGPT is not set -# CONFIG_CS89x0 is not set -# CONFIG_CUSE is not set -# CONFIG_CW1200 is not set -# CONFIG_CXL_BASE is not set -# CONFIG_CXL_EEH is not set -# CONFIG_CXL_KERNEL_API is not set -# CONFIG_CYPRESS_FIRMWARE is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_DCB is not set -# CONFIG_DDR is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_CREDENTIALS is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_GPIO is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_INFO_DWARF4 is not set -CONFIG_DEBUG_INFO_REDUCED=y -# CONFIG_DEBUG_INFO_SPLIT is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_KOBJECT_RELEASE is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_LL is not set -# CONFIG_DEBUG_LL_UART_8250 is not set -# CONFIG_DEBUG_LL_UART_PL01X is not set -# CONFIG_DEBUG_LOCKDEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_NX_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_PINCTRL is not set -# CONFIG_DEBUG_PI_LIST is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -# CONFIG_DEBUG_SEMIHOSTING is not set -# CONFIG_DEBUG_SET_MODULE_RONX is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set -# CONFIG_DEBUG_TIMEKEEPING is not set -# CONFIG_DEBUG_UART_BCM63XX is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_ZBOOT is not set -# CONFIG_DECNET is not set -CONFIG_DEFAULT_CUBIC=y -CONFIG_DEFAULT_DEADLINE=y -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -# CONFIG_DEFAULT_NOOP is not set -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_SECURITY="" -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -# CONFIG_DELL_RBTN is not set -# CONFIG_DELL_SMO8800 is not set -# CONFIG_DEPRECATED_PARAM_STRUCT is not set -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_DEVKMEM is not set -# CONFIG_DEVMEM is not set -CONFIG_DEVPORT=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_DEVTMPFS is not set -# CONFIG_DEVTMPFS_MOUNT is not set -# CONFIG_DGAP is not set -# CONFIG_DGNC is not set -# CONFIG_DHT11 is not set -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set -# CONFIG_DISPLAY_CONNECTOR_DVI is not set -# CONFIG_DISPLAY_CONNECTOR_HDMI is not set -# CONFIG_DISPLAY_ENCODER_TFP410 is not set -# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set -# CONFIG_DISPLAY_PANEL_DPI is not set -# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set -# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set -# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set -# CONFIG_DL2K is not set -# CONFIG_DLM is not set -# CONFIG_DM9000 is not set -# CONFIG_DMADEVICES is not set -# CONFIG_DMADEVICES_DEBUG is not set -# CONFIG_DMASCC is not set -# CONFIG_DMATEST is not set -# CONFIG_DMA_API_DEBUG is not set -# CONFIG_DMA_ENGINE is not set -# CONFIG_DMA_SHARED_BUFFER is not set -# CONFIG_DM_CACHE is not set -# CONFIG_DM_DEBUG is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_ERA is not set -# CONFIG_DM_FLAKEY is not set -# CONFIG_DM_LOG_USERSPACE is not set -# CONFIG_DM_LOG_WRITES is not set -# CONFIG_DM_MQ_DEFAULT is not set -# CONFIG_DM_MULTIPATH is not set -# CONFIG_DM_RAID is not set -# CONFIG_DM_SWITCH is not set -# CONFIG_DM_THIN_PROVISIONING is not set -# CONFIG_DM_UEVENT is not set -# CONFIG_DM_VERITY is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DNET is not set -# CONFIG_DNOTIFY is not set -# CONFIG_DNS_RESOLVER is not set -CONFIG_DOUBLEFAULT=y -# CONFIG_DP83848_PHY is not set -# CONFIG_DP83867_PHY is not set -CONFIG_DQL=y -# CONFIG_DRAGONRISE_FF is not set -# CONFIG_DRM is not set -# CONFIG_DS1682 is not set -# CONFIG_DTLK is not set -# CONFIG_DUMMY is not set -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -# CONFIG_DUMMY_IRQ is not set -# CONFIG_DVB_AU8522_V4L is not set -# CONFIG_DVB_CORE is not set -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_DIB0090 is not set -# CONFIG_DWMAC_IPQ806X is not set -# CONFIG_DWMAC_LPC18XX is not set -# CONFIG_DWMAC_MESON is not set -# CONFIG_DWMAC_ROCKCHIP is not set -# CONFIG_DWMAC_SOCFPGA is not set -# CONFIG_DWMAC_STI is not set -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set -# CONFIG_DW_WATCHDOG is not set -# CONFIG_DYNAMIC_DEBUG is not set -# CONFIG_E100 is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_EARLY_PRINTK_8250 is not set -# CONFIG_ECHO is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_EDAC is not set -# CONFIG_EEEPC_LAPTOP is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_AT25 is not set -# CONFIG_EEPROM_DIGSY_MTC_CFG is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_MAX6875 is not set -CONFIG_EFI_PARTITION=y -# CONFIG_EFS_FS is not set -# CONFIG_ELF_CORE is not set -# CONFIG_EMAC_ROCKCHIP is not set -CONFIG_EMBEDDED=y -# CONFIG_EM_TIMER_STI is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -# CONFIG_ENC28J60 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_ENCX24J600 is not set -# CONFIG_ENIC is not set -# CONFIG_EPAPR_PARAVIRT is not set -# CONFIG_EPIC100 is not set -CONFIG_EPOLL=y -# CONFIG_EQUALIZER is not set -# CONFIG_ET131X is not set -CONFIG_ETHERNET=y -# CONFIG_ETHOC is not set -CONFIG_EVENTFD=y -CONFIG_EXPERT=y -# CONFIG_EXPORTFS is not set -# CONFIG_EXT2_FS is not set -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4_DEBUG is not set -# CONFIG_EXT4_ENCRYPTION is not set -# CONFIG_EXT4_FS is not set -# CONFIG_EXT4_FS_POSIX_ACL is not set -# CONFIG_EXT4_FS_SECURITY is not set -CONFIG_EXT4_USE_FOR_EXT2=y -# CONFIG_EXTCON is not set -# CONFIG_EXTCON_ADC_JACK is not set -# CONFIG_EXTCON_GPIO is not set -# CONFIG_EXTCON_RT8973A is not set -# CONFIG_EXTCON_SM5502 is not set -# CONFIG_EXTCON_USB_GPIO is not set -CONFIG_EXTRA_FIRMWARE="" -CONFIG_EXTRA_TARGETS="" -# CONFIG_EXYNOS_ADC is not set -# CONFIG_EXYNOS_VIDEO is not set -# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_F2FS_FS is not set -# CONFIG_F2FS_FS_ENCRYPTION is not set -# CONFIG_F2FS_FS_POSIX_ACL is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_FANOTIFY is not set -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_FS is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_FB is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_ARMCLCD is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_AUO_K190X is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_BIG_ENDIAN is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -# CONFIG_FB_BOTH_ENDIAN is not set -# CONFIG_FB_BROADSHEET is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_DA8XX is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_GEODE is not set -# CONFIG_FB_GOLDFISH is not set -# CONFIG_FB_HGA is not set -# CONFIG_FB_I740 is not set -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_IMX is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_LE80578 is not set -# CONFIG_FB_LITTLE_ENDIAN is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_MB862XX is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_MXS is not set -# CONFIG_FB_N411 is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_OF is not set -# CONFIG_FB_OMAP2 is not set -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_PS3 is not set -# CONFIG_FB_PXA is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIMPLE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_SM712 is not set -# CONFIG_FB_SM750 is not set -# CONFIG_FB_SMSCUFX is not set -# CONFIG_FB_SSD1307 is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_TFT is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_TMIO is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_UDL is not set -# CONFIG_FB_UVESA is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_VIA is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_XGI is not set -# CONFIG_FCOE is not set -# CONFIG_FCOE_FNIC is not set -# CONFIG_FDDI is not set -# CONFIG_FEALNX is not set -# CONFIG_FENCE_TRACE is not set -# CONFIG_FHANDLE is not set -CONFIG_FIB_RULES=y -CONFIG_FILE_LOCKING=y -# CONFIG_FIREWIRE is not set -# CONFIG_FIREWIRE_NOSY is not set -# CONFIG_FIREWIRE_SERIAL is not set -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_FIRMWARE_MEMMAP is not set -# CONFIG_FIXED_PHY is not set -CONFIG_FLATMEM=y -CONFIG_FLATMEM_MANUAL=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_FM10K is not set -# CONFIG_FMC is not set -# CONFIG_FORCEDETH is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -# CONFIG_FPGA is not set -# CONFIG_FRAMEBUFFER_CONSOLE is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_FREEZER is not set -# CONFIG_FRONTSWAP is not set -# CONFIG_FSCACHE is not set -# CONFIG_FSL_EDMA is not set -# CONFIG_FSL_PQ_MDIO is not set -# CONFIG_FSL_XGMAC_MDIO is not set -CONFIG_FSNOTIFY=y -# CONFIG_FS_DAX is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_FTGMAC100 is not set -# CONFIG_FTL is not set -# CONFIG_FTMAC100 is not set -# CONFIG_FTRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_FUJITSU_ES is not set -# CONFIG_FUJITSU_LAPTOP is not set -# CONFIG_FUJITSU_TABLET is not set -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_FUSE_FS is not set -# CONFIG_FUSION is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -# CONFIG_FUSION_SPI is not set -CONFIG_FUTEX=y -CONFIG_FW_LOADER=y -CONFIG_FW_LOADER_USER_HELPER=y -CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y -CONFIG_GACT_PROB=y -# CONFIG_GADGET_UAC1 is not set -# CONFIG_GAMEPORT is not set -# CONFIG_GATEWORKS_GW16083 is not set -# CONFIG_GCOV is not set -# CONFIG_GCOV_KERNEL is not set -# CONFIG_GDB_SCRIPTS is not set -# CONFIG_GENERIC_ADC_BATTERY is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_CPU_DEVICES is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_NET_UTILS=y -# CONFIG_GENERIC_PHY is not set -# CONFIG_GENEVE is not set -# CONFIG_GENWQE is not set -# CONFIG_GFS2_FS is not set -# CONFIG_GIGASET_CAPI is not set -# CONFIG_GIGASET_DEBUG is not set -# CONFIG_GLOB_SELFTEST is not set -# CONFIG_GP2AP020A00F is not set -# CONFIG_GPIOLIB is not set -# CONFIG_GPIO_74X164 is not set -# CONFIG_GPIO_74XX_MMIO is not set -# CONFIG_GPIO_ADNP is not set -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ALTERA is not set -# CONFIG_GPIO_AMD8111 is not set -# CONFIG_GPIO_BCM_KONA is not set -# CONFIG_GPIO_BT8XX is not set -# CONFIG_GPIO_CS5535 is not set -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EM is not set -# CONFIG_GPIO_GENERIC_PLATFORM is not set -# CONFIG_GPIO_GRGPIO is not set -# CONFIG_GPIO_ICH is not set -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_GPIO_ML_IOH is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_PCH is not set -# CONFIG_GPIO_PL061 is not set -# CONFIG_GPIO_RCAR is not set -# CONFIG_GPIO_RDC321X is not set -# CONFIG_GPIO_SCH is not set -# CONFIG_GPIO_SCH311X is not set -# CONFIG_GPIO_SX150X is not set -# CONFIG_GPIO_SYSCON is not set -# CONFIG_GPIO_SYSFS is not set -# CONFIG_GPIO_TS5500 is not set -# CONFIG_GPIO_VX855 is not set -# CONFIG_GPIO_WATCHDOG is not set -# CONFIG_GPIO_XILINX is not set -# CONFIG_GPIO_ZEVIO is not set -# CONFIG_GPIO_ZX is not set -# CONFIG_GREENASIA_FF is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_HAMACHI is not set -# CONFIG_HAMRADIO is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_HARDLOCKUP_DETECTOR is not set -# CONFIG_HAVE_AOUT is not set -# CONFIG_HAVE_ARM_ARCH_TIMER is not set -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_CAT=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HCALL_STATS is not set -# CONFIG_HDC100X is not set -# CONFIG_HDLC is not set -# CONFIG_HDLC_CISCO is not set -# CONFIG_HDLC_FR is not set -# CONFIG_HDLC_PPP is not set -# CONFIG_HDLC_RAW is not set -# CONFIG_HDLC_RAW_ETH is not set -# CONFIG_HDQ_MASTER_OMAP is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_HERMES is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_HFSPLUS_FS_POSIX_ACL is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFS_FS_POSIX_ACL is not set -# CONFIG_HI8435 is not set -# CONFIG_HIBERNATION is not set -# CONFIG_HID is not set -# CONFIG_HIDRAW is not set -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_ACRUX is not set -# CONFIG_HID_ACRUX_FF is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_APPLEIR is not set -# CONFIG_HID_AUREAL is not set -# CONFIG_HID_BATTERY_STRENGTH is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_BETOP_FF is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -# CONFIG_HID_CORSAIR is not set -# CONFIG_HID_CP2112 is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_ELECOM is not set -# CONFIG_HID_ELO is not set -# CONFIG_HID_EMS_FF is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_GEMBIRD is not set -# CONFIG_HID_GENERIC is not set -# CONFIG_HID_GFRM is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_GT683R is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_HOLTEK is not set -# CONFIG_HID_ICADE is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_KEYTOUCH is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_LCPOWER is not set -# CONFIG_HID_LENOVO is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_LOGITECH_DJ is not set -# CONFIG_HID_LOGITECH_HIDPP is not set -# CONFIG_HID_MAGICMOUSE is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_MULTITOUCH is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_ORTEK is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PENMOUNT is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_PICOLCD is not set -# CONFIG_HID_PID is not set -# CONFIG_HID_PLANTRONICS is not set -# CONFIG_HID_PRIMAX is not set -# CONFIG_HID_PRODIKEYS is not set -# CONFIG_HID_RMI is not set -# CONFIG_HID_ROCCAT is not set -# CONFIG_HID_SAITEK is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SENSOR_HUB is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_SPEEDLINK is not set -# CONFIG_HID_STEELSERIES is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_THINGM is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_TIVO is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_UCLOGIC is not set -# CONFIG_HID_WACOM is not set -# CONFIG_HID_WALTOP is not set -# CONFIG_HID_WIIMOTE is not set -# CONFIG_HID_XINMO is not set -# CONFIG_HID_ZEROPLUS is not set -# CONFIG_HID_ZYDACRON is not set -# CONFIG_HIGHMEM is not set -CONFIG_HIGH_RES_TIMERS=y -# CONFIG_HIP04_ETH is not set -# CONFIG_HIPPI is not set -# CONFIG_HIX5HD2_GMAC is not set -# CONFIG_HMC6352 is not set -# CONFIG_HNS is not set -# CONFIG_HNS_DSAF is not set -# CONFIG_HNS_ENET is not set -# CONFIG_HOSTAP is not set -# CONFIG_HOSTAP_CS is not set -# CONFIG_HOSTAP_PCI is not set -# CONFIG_HOSTAP_PLX is not set -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HP100 is not set -CONFIG_HPET_MMAP_DEFAULT=y -# CONFIG_HPFS_FS is not set -# CONFIG_HP_ILO is not set -# CONFIG_HP_WIRELESS is not set -# CONFIG_HSI is not set -# CONFIG_HSR is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTU21 is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_HVC_DCC is not set -# CONFIG_HVC_UDBG is not set -# CONFIG_HWMON is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_HWMON_VID is not set -# CONFIG_HWSPINLOCK_OMAP is not set -CONFIG_HW_PERF_EVENTS=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HW_RANDOM_AMD is not set -# CONFIG_HW_RANDOM_ATMEL is not set -# CONFIG_HW_RANDOM_EXYNOS is not set -# CONFIG_HW_RANDOM_GEODE is not set -# CONFIG_HW_RANDOM_INTEL is not set -# CONFIG_HW_RANDOM_IPROC_RNG200 is not set -# CONFIG_HW_RANDOM_OMAP3_ROM is not set -# CONFIG_HW_RANDOM_PPC4XX is not set -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -# CONFIG_HW_RANDOM_TPM is not set -# CONFIG_HW_RANDOM_VIA is not set -# CONFIG_HW_RANDOM_VIRTIO is not set -# CONFIG_HYPERV is not set -# CONFIG_HYSDN is not set -CONFIG_HZ=100 -CONFIG_HZ_100=y -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_200 is not set -# CONFIG_HZ_24 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -# CONFIG_HZ_300 is not set -# CONFIG_HZ_48 is not set -# CONFIG_HZ_500 is not set -# CONFIG_HZ_PERIODIC is not set -# CONFIG_I2C is not set -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCA is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set -# CONFIG_I2C_AU1550 is not set -# CONFIG_I2C_BCM2835 is not set -# CONFIG_I2C_BCM_IPROC is not set -# CONFIG_I2C_CADENCE is not set -# CONFIG_I2C_CBUS_GPIO is not set -# CONFIG_I2C_CHARDEV is not set -# CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set -# CONFIG_I2C_DIOLAN_U2C is not set -# CONFIG_I2C_EG20T is not set -# CONFIG_I2C_ELEKTOR is not set -# CONFIG_I2C_EMEV2 is not set -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_HELPER_AUTO is not set -# CONFIG_I2C_HID is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_IMG is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_ISMT is not set -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_MUX is not set -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_MUX_REG is not set -# CONFIG_I2C_MV64XXX is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_NOMADIK is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_OCTEON is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PXA_PCI is not set -# CONFIG_I2C_RCAR is not set -# CONFIG_I2C_RK3X is not set -# CONFIG_I2C_ROBOTFUZZ_OSIF is not set -# CONFIG_I2C_SCMI is not set -# CONFIG_I2C_SH_MOBILE is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_SLAVE is not set -# CONFIG_I2C_SMBUS is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set -# CONFIG_I2C_VERSATILE is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_XILINX is not set -# CONFIG_I40E is not set -# CONFIG_I40EVF is not set -# CONFIG_I6300ESB_WDT is not set -# CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_IBM_ASM is not set -# CONFIG_IBM_EMAC_DEBUG is not set -# CONFIG_IBM_EMAC_EMAC4 is not set -# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set -# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_EMAC_RGMII is not set -# CONFIG_IBM_EMAC_TAH is not set -# CONFIG_IBM_EMAC_ZMII is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_ICS932S401 is not set -# CONFIG_IDE is not set -# CONFIG_IDEAPAD_LAPTOP is not set -# CONFIG_IDE_GD is not set -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDE_TASK_IOCTL is not set -# CONFIG_IDLE_PAGE_TRACKING is not set -# CONFIG_IEEE802154 is not set -# CONFIG_IEEE802154_ATUSB is not set -# CONFIG_IFB is not set -# CONFIG_IGB is not set -# CONFIG_IGBVF is not set -# CONFIG_IIO is not set -# CONFIG_IIO_BUFFER_CB is not set -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -# CONFIG_IIO_INTERRUPT_TRIGGER is not set -# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set -# CONFIG_IIO_SIMPLE_DUMMY is not set -# CONFIG_IIO_SSP_SENSORHUB is not set -# CONFIG_IIO_ST_ACCEL_3AXIS is not set -# CONFIG_IIO_ST_GYRO_3AXIS is not set -# CONFIG_IIO_ST_MAGN_3AXIS is not set -# CONFIG_IIO_ST_PRESS is not set -# CONFIG_IIO_SYSFS_TRIGGER is not set -# CONFIG_IKCONFIG is not set -# CONFIG_IKCONFIG_PROC is not set -# CONFIG_IMAGE_CMDLINE_HACK is not set -# CONFIG_IMGPDC_WDT is not set -# CONFIG_IMX_IPUV3_CORE is not set -# CONFIG_IMX_THERMAL is not set -CONFIG_INET=y -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_DIAG is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_TCP_DIAG is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_UDP_DIAG is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INFINIBAND is not set -# CONFIG_INFTL is not set -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_INLINE_READ_LOCK is not set -# CONFIG_INLINE_READ_LOCK_BH is not set -# CONFIG_INLINE_READ_LOCK_IRQ is not set -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set -# CONFIG_INLINE_READ_TRYLOCK is not set -CONFIG_INLINE_READ_UNLOCK=y -# CONFIG_INLINE_READ_UNLOCK_BH is not set -CONFIG_INLINE_READ_UNLOCK_IRQ=y -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_SPIN_LOCK is not set -# CONFIG_INLINE_SPIN_LOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set -# CONFIG_INLINE_SPIN_TRYLOCK is not set -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_WRITE_LOCK is not set -# CONFIG_INLINE_WRITE_LOCK_BH is not set -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set -# CONFIG_INLINE_WRITE_TRYLOCK is not set -CONFIG_INLINE_WRITE_UNLOCK=y -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set -CONFIG_INOTIFY_USER=y -# CONFIG_INPUT is not set -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_APANEL is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_ATLAS_BTNS is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_CM109 is not set -# CONFIG_INPUT_CMA3000 is not set -# CONFIG_INPUT_DRV260X_HAPTICS is not set -# CONFIG_INPUT_DRV2665_HAPTICS is not set -# CONFIG_INPUT_DRV2667_HAPTICS is not set -# CONFIG_INPUT_E3X0_BUTTON is not set -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_GPIO_TILT_POLLED is not set -# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_KXTJ9 is not set -# CONFIG_INPUT_LEDS is not set -# CONFIG_INPUT_MATRIXKMAP is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_MMA8450 is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_MPU3050 is not set -# CONFIG_INPUT_PALMAS_PWRBUTTON is not set -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PCSPKR is not set -# CONFIG_INPUT_POLLDEV is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_REGULATOR_HAPTIC is not set -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set -# CONFIG_INPUT_SPARSEKMAP is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_TPS65218_PWRBUTTON is not set -# CONFIG_INPUT_TWL4030_PWRBUTTON is not set -# CONFIG_INPUT_TWL4030_VIBRA is not set -# CONFIG_INPUT_TWL6040_VIBRA is not set -# CONFIG_INPUT_UINPUT is not set -# CONFIG_INPUT_WISTRON_BTNS is not set -# CONFIG_INPUT_YEALINK is not set -# CONFIG_INT340X_THERMAL is not set -# CONFIG_INTEL_IDLE is not set -# CONFIG_INTEL_IDMA64 is not set -# CONFIG_INTEL_MEI is not set -# CONFIG_INTEL_MEI_ME is not set -# CONFIG_INTEL_MEI_TXE is not set -# CONFIG_INTEL_MIC_CARD is not set -# CONFIG_INTEL_MIC_HOST is not set -# CONFIG_INTEL_MID_PTI is not set -# CONFIG_INTEL_OAKTRAIL is not set -# CONFIG_INTEL_RST is not set -# CONFIG_INTEL_SMARTCONNECT is not set -# CONFIG_INTEL_SOC_PMIC is not set -# CONFIG_INTEL_TH is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_INV_MPU6050_IIO is not set -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_NOOP=y -# CONFIG_IP17XX_PHY is not set -# CONFIG_IP6_NF_FILTER is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_MANGLE is not set -# CONFIG_IP6_NF_MATCH_AH is not set -# CONFIG_IP6_NF_MATCH_EUI64 is not set -# CONFIG_IP6_NF_MATCH_FRAG is not set -# CONFIG_IP6_NF_MATCH_HL is not set -# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -# CONFIG_IP6_NF_MATCH_MH is not set -# CONFIG_IP6_NF_MATCH_OPTS is not set -# CONFIG_IP6_NF_MATCH_RPFILTER is not set -# CONFIG_IP6_NF_MATCH_RT is not set -# CONFIG_IP6_NF_NAT is not set -# CONFIG_IP6_NF_RAW is not set -# CONFIG_IP6_NF_TARGET_HL is not set -# CONFIG_IP6_NF_TARGET_REJECT is not set -# CONFIG_IP6_NF_TARGET_SYNPROXY is not set -# CONFIG_IPACK_BUS is not set -# CONFIG_IPC_NS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPV6 is not set -# CONFIG_IPV6_ILA is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_ROUTE_INFO is not set -# CONFIG_IPV6_SIT is not set -# CONFIG_IPV6_SIT_6RD is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_VTI is not set -# CONFIG_IPVLAN is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2200 is not set -# CONFIG_IPW2200_DEBUG is not set -CONFIG_IPW2200_MONITOR=y -# CONFIG_IPW2200_PROMISCUOUS is not set -# CONFIG_IPW2200_QOS is not set -# CONFIG_IPW2200_RADIOTAP is not set -# CONFIG_IPWIRELESS is not set -# CONFIG_IPX is not set -CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_IP_DCCP is not set -# CONFIG_IP_FIB_TRIE_STATS is not set -# CONFIG_IP_MROUTE is not set -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_NF_ARPFILTER is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_ARP_MANGLE is not set -# CONFIG_IP_NF_FILTER is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_MATCH_AH is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_RPFILTER is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_SECURITY is not set -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_MASQUERADE is not set -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_REDIRECT is not set -# CONFIG_IP_NF_TARGET_REJECT is not set -# CONFIG_IP_NF_TARGET_SYNPROXY is not set -# CONFIG_IP_NF_TARGET_TTL is not set -# CONFIG_IP_PIMSM_V1 is not set -# CONFIG_IP_PIMSM_V2 is not set -# CONFIG_IP_PNP is not set -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_SCTP is not set -# CONFIG_IP_SET is not set -# CONFIG_IP_VS is not set -# CONFIG_IRDA is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_IRQ_ALL_CPUS is not set -# CONFIG_IRQ_DOMAIN_DEBUG is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -# CONFIG_IR_GPIO_CIR is not set -# CONFIG_IR_HIX5HD2 is not set -# CONFIG_IR_IGORPLUGUSB is not set -# CONFIG_IR_IGUANA is not set -# CONFIG_IR_IMG is not set -# CONFIG_IR_IMON is not set -# CONFIG_IR_JVC_DECODER is not set -# CONFIG_IR_LIRC_CODEC is not set -# CONFIG_IR_MCEUSB is not set -# CONFIG_IR_NEC_DECODER is not set -# CONFIG_IR_RC5_DECODER is not set -# CONFIG_IR_RC6_DECODER is not set -# CONFIG_IR_REDRAT3 is not set -# CONFIG_IR_SONY_DECODER is not set -# CONFIG_IR_STREAMZAP is not set -# CONFIG_IR_TTUSBIR is not set -# CONFIG_ISCSI_BOOT_SYSFS is not set -# CONFIG_ISCSI_TCP is not set -CONFIG_ISDN=y -# CONFIG_ISDN_AUDIO is not set -# CONFIG_ISDN_CAPI is not set -# CONFIG_ISDN_CAPI_CAPIDRV is not set -# CONFIG_ISDN_DIVERSION is not set -# CONFIG_ISDN_DRV_ACT2000 is not set -# CONFIG_ISDN_DRV_GIGASET is not set -# CONFIG_ISDN_DRV_HISAX is not set -# CONFIG_ISDN_DRV_ICN is not set -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DRV_PCBIT is not set -# CONFIG_ISDN_DRV_SC is not set -# CONFIG_ISDN_I4L is not set -# CONFIG_ISL29003 is not set -# CONFIG_ISL29020 is not set -# CONFIG_ISL29125 is not set -# CONFIG_ISO9660_FS is not set -# CONFIG_ISS4xx is not set -# CONFIG_ITG3200 is not set -# CONFIG_IWL3945 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IXGB is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGBEVF is not set -# CONFIG_JBD2_DEBUG is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_POSIX_ACL is not set -# CONFIG_JFFS2_FS_SECURITY is not set -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_LZMA=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_ZLIB is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_FS is not set -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_STATISTICS is not set -# CONFIG_JME is not set -CONFIG_JOLIET=y -# CONFIG_JSA1212 is not set -# CONFIG_JUMP_LABEL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_UNCOMPRESSED is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_KASAN is not set -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_CAT is not set -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_LZ4 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_LZO is not set -CONFIG_KERNEL_MODE_NEON=y -CONFIG_KERNEL_XZ=y -CONFIG_KERNFS=y -# CONFIG_KEXEC is not set -# CONFIG_KEYBOARD_ADP5588 is not set -# CONFIG_KEYBOARD_ADP5589 is not set -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_BCM is not set -# CONFIG_KEYBOARD_CAP11XX is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_LM8333 is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_MAX7359 is not set -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_OMAP4 is not set -# CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_PXA27x is not set -# CONFIG_KEYBOARD_QT1070 is not set -# CONFIG_KEYBOARD_QT2160 is not set -# CONFIG_KEYBOARD_SAMSUNG is not set -# CONFIG_KEYBOARD_SH_KEYSC is not set -# CONFIG_KEYBOARD_SNVS_PWRKEY is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_TWL4030 is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYS is not set -# CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set -# CONFIG_KMX61 is not set -# CONFIG_KPROBES is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -# CONFIG_KSM is not set -# CONFIG_KSZ884X_PCI is not set -CONFIG_KUSER_HELPERS=y -# CONFIG_KVM_AMD is not set -# CONFIG_KVM_GUEST is not set -# CONFIG_KVM_INTEL is not set -# CONFIG_KXCJK1013 is not set -# CONFIG_KXSD9 is not set -# CONFIG_L2TP is not set -# CONFIG_L2TP_ETH is not set -# CONFIG_L2TP_IP is not set -# CONFIG_L2TP_V3 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_LANTIQ is not set -# CONFIG_LANTIQ_PHY is not set -# CONFIG_LAPB is not set -# CONFIG_LASAT is not set -# CONFIG_LATENCYTOP is not set -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_LBDAF=y -# CONFIG_LCD_AMS369FG06 is not set -# CONFIG_LCD_HX8357 is not set -# CONFIG_LCD_ILI922X is not set -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_L4F00242T03 is not set -# CONFIG_LCD_LD9040 is not set -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LMS501KF03 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_S6E63M0 is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_LEDS_BCM6328 is not set -# CONFIG_LEDS_BCM6358 is not set -# CONFIG_LEDS_BD2802 is not set -# CONFIG_LEDS_BLINKM is not set -CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_CLASS_FLASH is not set -# CONFIG_LEDS_DAC124S085 is not set -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_INTEL_SS4200 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM355x is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_LP3944 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_NS2 is not set -# CONFIG_LEDS_OT200 is not set -# CONFIG_LEDS_PCA9532 is not set -# CONFIG_LEDS_PCA955X is not set -# CONFIG_LEDS_PCA963X is not set -# CONFIG_LEDS_PWM is not set -# CONFIG_LEDS_REGULATOR is not set -# CONFIG_LEDS_SYSCON is not set -# CONFIG_LEDS_TCA6507 is not set -# CONFIG_LEDS_TLC591XX is not set -CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -# CONFIG_LEDS_TRIGGER_CAMERA is not set -# CONFIG_LEDS_TRIGGER_CPU is not set -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -# CONFIG_LEDS_TRIGGER_GPIO is not set -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -# CONFIG_LEDS_TRIGGER_IDE_DISK is not set -CONFIG_LEDS_TRIGGER_NETDEV=y -# CONFIG_LEDS_TRIGGER_ONESHOT is not set -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_TRANSIENT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_LGUEST is not set -# CONFIG_LIB80211 is not set -# CONFIG_LIB80211_CRYPT_CCMP is not set -# CONFIG_LIB80211_CRYPT_TKIP is not set -# CONFIG_LIB80211_CRYPT_WEP is not set -# CONFIG_LIB80211_DEBUG is not set -# CONFIG_LIBCRC32C is not set -# CONFIG_LIBERTAS is not set -# CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_LIBERTAS_USB is not set -# CONFIG_LIBFC is not set -# CONFIG_LIBFCOE is not set -# CONFIG_LIBIPW_DEBUG is not set -# CONFIG_LIBNVDIMM is not set -# CONFIG_LIDAR_LITE_V2 is not set -# CONFIG_LIRC_STAGING is not set -# CONFIG_LIS3L02DQ is not set -# CONFIG_LKDTM is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_LOCKD is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_LOCKD_V4=y -# CONFIG_LOCKUP_DETECTOR is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_LOCK_TORTURE_TEST is not set -# CONFIG_LOGFS is not set -# CONFIG_LOGIG940_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIWHEELS_FF is not set -# CONFIG_LOGO is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -# CONFIG_LOONGSON_MC146818 is not set -# CONFIG_LPC_ICH is not set -# CONFIG_LPC_SCH is not set -# CONFIG_LP_CONSOLE is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_LTE_GDM724X is not set -# CONFIG_LTPC is not set -# CONFIG_LTR501 is not set -# CONFIG_LUSTRE_FS is not set -# CONFIG_LWTUNNEL is not set -# CONFIG_LXT_PHY is not set -# CONFIG_LZ4HC_COMPRESS is not set -# CONFIG_LZ4_COMPRESS is not set -# CONFIG_LZ4_DECOMPRESS is not set -CONFIG_LZMA_COMPRESS=y -CONFIG_LZMA_DECOMPRESS=y -# CONFIG_LZO_COMPRESS is not set -# CONFIG_LZO_DECOMPRESS is not set -# CONFIG_M62332 is not set -# CONFIG_MAC80211 is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -# CONFIG_MACB is not set -# CONFIG_MACH_ASM9260 is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_INGENIC is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_JZ4740 is not set -# CONFIG_MACH_LOONGSON32 is not set -# CONFIG_MACH_LOONGSON64 is not set -# CONFIG_MACH_PISTACHIO is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MACH_XILFPGA is not set -# CONFIG_MACINTOSH_DRIVERS is not set -# CONFIG_MACVLAN is not set -# CONFIG_MACVTAP is not set -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MAG3110 is not set -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -# CONFIG_MAGIC_SYSRQ_SERIAL is not set -# CONFIG_MAILBOX is not set -# CONFIG_MANGLE_BOOTARGS is not set -# CONFIG_MARVELL_PHY is not set -# CONFIG_MAX1027 is not set -# CONFIG_MAX1363 is not set -# CONFIG_MAX517 is not set -# CONFIG_MAX5821 is not set -# CONFIG_MAX63XX_WATCHDOG is not set -# CONFIG_MCB is not set -# CONFIG_MCP320X is not set -# CONFIG_MCP3422 is not set -# CONFIG_MCP4531 is not set -# CONFIG_MCP4725 is not set -# CONFIG_MCP4922 is not set -# CONFIG_MCPM is not set -# CONFIG_MD is not set -# CONFIG_MDIO_BCM_UNIMAC is not set -# CONFIG_MDIO_BITBANG is not set -# CONFIG_MDIO_BUS_MUX_GPIO is not set -# CONFIG_MDIO_BUS_MUX_MMIOREG is not set -# CONFIG_MDIO_OCTEON is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set -# CONFIG_MEDIA_ATTACH is not set -# CONFIG_MEDIA_CAMERA_SUPPORT is not set -# CONFIG_MEDIA_CONTROLLER is not set -# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set -# CONFIG_MEDIA_PCI_SUPPORT is not set -# CONFIG_MEDIA_RADIO_SUPPORT is not set -# CONFIG_MEDIA_RC_SUPPORT is not set -# CONFIG_MEDIA_SDR_SUPPORT is not set -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -# CONFIG_MEDIA_SUPPORT is not set -# CONFIG_MEDIA_USB_SUPPORT is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_MEMBARRIER=y -# CONFIG_MEMORY is not set -# CONFIG_MEMORY_FAILURE is not set -# CONFIG_MEMSTICK is not set -# CONFIG_MEMTEST is not set -# CONFIG_MEN_A21_WDT is not set -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_AS3711 is not set -# CONFIG_MFD_AS3722 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_MFD_ATMEL_FLEXCOM is not set -# CONFIG_MFD_ATMEL_HLCDC is not set -# CONFIG_MFD_AXP20X is not set -# CONFIG_MFD_BCM590XX is not set -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_CROS_EC is not set -# CONFIG_MFD_CS5535 is not set -# CONFIG_MFD_DA9052_I2C is not set -# CONFIG_MFD_DA9052_SPI is not set -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9062 is not set -# CONFIG_MFD_DA9063 is not set -# CONFIG_MFD_DA9150 is not set -# CONFIG_MFD_DLN2 is not set -# CONFIG_MFD_HI6421_PMIC is not set -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_MAX14577 is not set -# CONFIG_MFD_MAX77686 is not set -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX77843 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_MFD_MC13XXX is not set -# CONFIG_MFD_MC13XXX_I2C is not set -# CONFIG_MFD_MC13XXX_SPI is not set -# CONFIG_MFD_MENF21BMC is not set -# CONFIG_MFD_MT6397 is not set -# CONFIG_MFD_OMAP_USB_HOST is not set -# CONFIG_MFD_PALMAS is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_MFD_PM8921_CORE is not set -# CONFIG_MFD_RC5T583 is not set -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_RK808 is not set -# CONFIG_MFD_RN5T618 is not set -# CONFIG_MFD_RT5033 is not set -# CONFIG_MFD_RTSX_PCI is not set -# CONFIG_MFD_RTSX_USB is not set -# CONFIG_MFD_SEC_CORE is not set -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SKY81452 is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_MFD_STMPE is not set -# CONFIG_MFD_SYSCON is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_MFD_TIMBERDALE is not set -# CONFIG_MFD_TI_AM335X_TSCADC is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -# CONFIG_MFD_VIPERBOARD is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_WM831X is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8994 is not set -# CONFIG_MG_DISK is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_MICREL_PHY is not set -# CONFIG_MICROCHIP_PHY is not set -# CONFIG_MIGRATION is not set -CONFIG_MII=y -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_MINIX_FS is not set -# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_MIPS_ALCHEMY is not set -# CONFIG_MIPS_CDMM is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_FPU_EMULATOR is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_O32_FP64_SUPPORT is not set -# CONFIG_MIPS_PARAVIRT is not set -# CONFIG_MIPS_PLATFORM_DEVICES is not set -# CONFIG_MIPS_SEAD3 is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_MISDN is not set -# CONFIG_MISDN_AVMFRITZ is not set -# CONFIG_MISDN_HFCPCI is not set -# CONFIG_MISDN_HFCUSB is not set -# CONFIG_MISDN_INFINEON is not set -# CONFIG_MISDN_NETJET is not set -# CONFIG_MISDN_SPEEDFAX is not set -# CONFIG_MISDN_W6692 is not set -# CONFIG_MKISS is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX5_CORE is not set -# CONFIG_MLX90614 is not set -# CONFIG_MLXSW_CORE is not set -# CONFIG_MMA8452 is not set -# CONFIG_MMA9551 is not set -# CONFIG_MMA9553 is not set -# CONFIG_MMC is not set -# CONFIG_MMC35240 is not set -# CONFIG_MMC_ARMMMCI is not set -# CONFIG_MMC_AU1X is not set -# CONFIG_MMC_BLOCK is not set -CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_MMC_BLOCK_MINORS=8 -# CONFIG_MMC_CB710 is not set -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_DW is not set -# CONFIG_MMC_MTK is not set -# CONFIG_MMC_MVSDIO is not set -# CONFIG_MMC_S3C is not set -# CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_SDHCI_ACPI is not set -# CONFIG_MMC_SDHCI_BCM_KONA is not set -# CONFIG_MMC_SDHCI_F_SDH30 is not set -# CONFIG_MMC_SDHCI_IPROC is not set -# CONFIG_MMC_SDHCI_MSM is not set -# CONFIG_MMC_SDHCI_OF_ARASAN is not set -# CONFIG_MMC_SDHCI_OF_AT91 is not set -# CONFIG_MMC_SDHCI_OF_ESDHC is not set -# CONFIG_MMC_SDHCI_OF_HLWD is not set -# CONFIG_MMC_SDHCI_PXAV2 is not set -# CONFIG_MMC_SDHCI_PXAV3 is not set -# CONFIG_MMC_SDRICOH_CS is not set -# CONFIG_MMC_SPI is not set -# CONFIG_MMC_TEST is not set -# CONFIG_MMC_TOSHIBA_PCI is not set -# CONFIG_MMC_USDHI6ROL0 is not set -# CONFIG_MMC_USHC is not set -# CONFIG_MMC_VIA_SDMMC is not set -# CONFIG_MMC_VUB300 is not set -# CONFIG_MMIOTRACE is not set -CONFIG_MMU=y -CONFIG_MODULES=y -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_MODULE_STRIPPED=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MOST is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_ELAN_I2C is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_PS2_FOCALTECH is not set -# CONFIG_MOUSE_PS2_SENTELIC is not set -# CONFIG_MOUSE_SYNAPTICS_I2C is not set -# CONFIG_MOUSE_SYNAPTICS_USB is not set -# CONFIG_MPL115 is not set -# CONFIG_MPL3115 is not set -# CONFIG_MPLS is not set -# CONFIG_MS5611 is not set -# CONFIG_MS5637 is not set -# CONFIG_MSDOS_FS is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_MSI_LAPTOP is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_DOCG3 is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_GPIO_ADDR is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_JEDECPROBE is not set -# CONFIG_MTD_LATCH_ADDR is not set -# CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_LPDDR2_NVM is not set -# CONFIG_MTD_M25P80 is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_MYLOADER_PARTS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_NAND_AMS_DELTA is not set -# CONFIG_MTD_NAND_AR934X is not set -# CONFIG_MTD_NAND_AR934X_HW_ECC is not set -# CONFIG_MTD_NAND_ATMEL is not set -# CONFIG_MTD_NAND_AU1550 is not set -# CONFIG_MTD_NAND_BCH is not set -# CONFIG_MTD_NAND_BF5XX is not set -# CONFIG_MTD_NAND_BRCMNAND is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_CM_X270 is not set -# CONFIG_MTD_NAND_CS553X is not set -# CONFIG_MTD_NAND_DAVINCI is not set -# CONFIG_MTD_NAND_DENALI is not set -# CONFIG_MTD_NAND_DENALI_DT is not set -# CONFIG_MTD_NAND_DENALI_PCI is not set -CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018 -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_DOCG4 is not set -# CONFIG_MTD_NAND_ECC is not set -# CONFIG_MTD_NAND_ECC_BCH is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_FSL_ELBC is not set -# CONFIG_MTD_NAND_FSL_IFC is not set -# CONFIG_MTD_NAND_FSL_UPM is not set -# CONFIG_MTD_NAND_FSMC is not set -# CONFIG_MTD_NAND_GPIO is not set -# CONFIG_MTD_NAND_GPMI_NAND is not set -# CONFIG_MTD_NAND_HISI504 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_JZ4740 is not set -# CONFIG_MTD_NAND_MPC5121_NFC is not set -# CONFIG_MTD_NAND_MXC is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_NDFC is not set -# CONFIG_MTD_NAND_NUC900 is not set -# CONFIG_MTD_NAND_OMAP2 is not set -# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set -# CONFIG_MTD_NAND_ORION is not set -# CONFIG_MTD_NAND_PASEMI is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_NAND_PXA3xx is not set -# CONFIG_MTD_NAND_RB4XX is not set -# CONFIG_MTD_NAND_RB750 is not set -# CONFIG_MTD_NAND_RICOH is not set -# CONFIG_MTD_NAND_S3C2410 is not set -# CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_SH_FLCTL is not set -# CONFIG_MTD_NAND_SOCRATES is not set -# CONFIG_MTD_NAND_TMIO is not set -# CONFIG_MTD_NAND_TXX9NDFMC is not set -CONFIG_MTD_OF_PARTS=y -# CONFIG_MTD_ONENAND is not set -# CONFIG_MTD_OOPS is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_PARTITIONED_MASTER is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PCMCIA is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_ROM is not set -CONFIG_MTD_ROOTFS_ROOT_DEV=y -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_SM_COMMON is not set -# CONFIG_MTD_SPINAND_MT29F is not set -# CONFIG_MTD_SPI_NOR is not set -# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set -CONFIG_MTD_SPLIT=y -# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set -# CONFIG_MTD_SPLIT_EVA_FW is not set -# CONFIG_MTD_SPLIT_FIRMWARE is not set -CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware" -# CONFIG_MTD_SPLIT_FIT_FW is not set -# CONFIG_MTD_SPLIT_JIMAGE_FW is not set -# CONFIG_MTD_SPLIT_LZMA_FW is not set -# CONFIG_MTD_SPLIT_MINOR_FW is not set -# CONFIG_MTD_SPLIT_SEAMA_FW is not set -CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y -CONFIG_MTD_SPLIT_SUPPORT=y -# CONFIG_MTD_SPLIT_TPLINK_FW is not set -# CONFIG_MTD_SPLIT_TRX_FW is not set -# CONFIG_MTD_SPLIT_UIMAGE_FW is not set -# CONFIG_MTD_SPLIT_WRGG_FW is not set -# CONFIG_MTD_SST25L is not set -# CONFIG_MTD_SWAP is not set -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_UBI is not set -# CONFIG_MTD_UIMAGE_SPLIT is not set -CONFIG_MULTIUSER=y -# CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_MV643XX_ETH is not set -# CONFIG_MVMDIO is not set -# CONFIG_MVSW61XX_PHY is not set -# CONFIG_MVSWITCH_PHY is not set -# CONFIG_MWAVE is not set -# CONFIG_MWL8K is not set -# CONFIG_MXC4005 is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NAMESPACES is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_NATSEMI is not set -# CONFIG_NAU7802 is not set -# CONFIG_NBPFAXI_DMA is not set -# CONFIG_NCP_FS is not set -# CONFIG_NE2000 is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_NEC_MARKEINS is not set -CONFIG_NET=y -# CONFIG_NETCONSOLE is not set -CONFIG_NETDEVICES=y -# CONFIG_NETFILTER is not set -# CONFIG_NETFILTER_ADVANCED is not set -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_INGRESS is not set -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NETFILTER_NETLINK_ACCT is not set -# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_XTABLES is not set -# CONFIG_NETFILTER_XT_CONNMARK is not set -# CONFIG_NETFILTER_XT_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_BPF is not set -# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set -# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set -# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set -# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_CPU is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ECN is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_HL is not set -# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set -# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -# CONFIG_NETFILTER_XT_MATCH_L2TP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set -# CONFIG_NETFILTER_XT_MATCH_OSF is not set -# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set -# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set -# CONFIG_NETFILTER_XT_TARGET_CT is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_HL is not set -# CONFIG_NETFILTER_XT_TARGET_HMARK is not set -# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set -# CONFIG_NETFILTER_XT_TARGET_LED is not set -# CONFIG_NETFILTER_XT_TARGET_LOG is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set -# CONFIG_NETFILTER_XT_TARGET_TEE is not set -# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETLINK_DIAG is not set -# CONFIG_NETLINK_MMAP is not set -# CONFIG_NETPOLL is not set -# CONFIG_NETROM is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NET_9P is not set -# CONFIG_NET_ACT_BPF is not set -# CONFIG_NET_ACT_CSUM is not set -# CONFIG_NET_ACT_GACT is not set -# CONFIG_NET_ACT_IPT is not set -# CONFIG_NET_ACT_MIRRED is not set -# CONFIG_NET_ACT_NAT is not set -# CONFIG_NET_ACT_PEDIT is not set -# CONFIG_NET_ACT_POLICE is not set -# CONFIG_NET_ACT_SIMP is not set -# CONFIG_NET_ACT_SKBEDIT is not set -# CONFIG_NET_ACT_VLAN is not set -CONFIG_NET_CADENCE=y -# CONFIG_NET_CALXEDA_XGMAC is not set -CONFIG_NET_CLS=y -# CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_BASIC is not set -# CONFIG_NET_CLS_BPF is not set -# CONFIG_NET_CLS_FLOW is not set -# CONFIG_NET_CLS_FLOWER is not set -# CONFIG_NET_CLS_FW is not set -CONFIG_NET_CLS_IND=y -# CONFIG_NET_CLS_ROUTE4 is not set -# CONFIG_NET_CLS_RSVP is not set -# CONFIG_NET_CLS_RSVP6 is not set -# CONFIG_NET_CLS_TCINDEX is not set -# CONFIG_NET_CLS_U32 is not set -CONFIG_NET_CORE=y -# CONFIG_NET_DROP_MONITOR is not set -# CONFIG_NET_DSA is not set -# CONFIG_NET_DSA_BCM_SF2 is not set -# CONFIG_NET_DSA_MV88E6060 is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6171 is not set -# CONFIG_NET_DSA_MV88E6352 is not set -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_TAG_DSA is not set -# CONFIG_NET_DSA_TAG_EDSA is not set -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_EMATCH_CANID is not set -# CONFIG_NET_EMATCH_CMP is not set -# CONFIG_NET_EMATCH_META is not set -# CONFIG_NET_EMATCH_NBYTE is not set -CONFIG_NET_EMATCH_STACK=32 -# CONFIG_NET_EMATCH_TEXT is not set -# CONFIG_NET_EMATCH_U32 is not set -# CONFIG_NET_FC is not set -# CONFIG_NET_FOU is not set -# CONFIG_NET_FOU_IP_TUNNELS is not set -# CONFIG_NET_IPGRE is not set -CONFIG_NET_IPGRE_BROADCAST=y -# CONFIG_NET_IPGRE_DEMUX is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPVTI is not set -# CONFIG_NET_IP_TUNNEL is not set -# CONFIG_NET_KEY is not set -# CONFIG_NET_KEY_MIGRATE is not set -# CONFIG_NET_L3_MASTER_DEV is not set -# CONFIG_NET_MPLS_GSO is not set -# CONFIG_NET_PACKET_ENGINE is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_NET_PTP_CLASSIFY is not set -CONFIG_NET_RX_BUSY_POLL=y -# CONFIG_NET_SB1000 is not set -CONFIG_NET_SCHED=y -# CONFIG_NET_SCH_ATM is not set -# CONFIG_NET_SCH_CBQ is not set -# CONFIG_NET_SCH_CHOKE is not set -# CONFIG_NET_SCH_CODEL is not set -# CONFIG_NET_SCH_DRR is not set -# CONFIG_NET_SCH_DSMARK is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_FQ is not set -CONFIG_NET_SCH_FQ_CODEL=y -# CONFIG_NET_SCH_GRED is not set -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_HHF is not set -# CONFIG_NET_SCH_HTB is not set -# CONFIG_NET_SCH_INGRESS is not set -# CONFIG_NET_SCH_MQPRIO is not set -# CONFIG_NET_SCH_MULTIQ is not set -# CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_PIE is not set -# CONFIG_NET_SCH_PLUG is not set -# CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_QFQ is not set -# CONFIG_NET_SCH_RED is not set -# CONFIG_NET_SCH_SFB is not set -# CONFIG_NET_SCH_SFQ is not set -# CONFIG_NET_SCH_TBF is not set -# CONFIG_NET_SCH_TEQL is not set -# CONFIG_NET_SCTPPROBE is not set -# CONFIG_NET_SWITCHDEV is not set -# CONFIG_NET_TCPPROBE is not set -# CONFIG_NET_TEAM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_NET_UDP_TUNNEL is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_NET_VENDOR_8390=y -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_NET_VENDOR_AGERE=y -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_NET_VENDOR_AMD=y -CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_NET_VENDOR_AURORA=y -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_NET_VENDOR_CIRRUS=y -CONFIG_NET_VENDOR_CISCO=y -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_VENDOR_DLINK=y -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_NET_VENDOR_EXAR=y -CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_FARADAY=y -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_NET_VENDOR_HISILICON=y -CONFIG_NET_VENDOR_HP=y -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_IBM=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_NET_VENDOR_MICREL=y -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_NET_VENDOR_MYRI=y -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_NET_VENDOR_OKI=y -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_NET_VENDOR_QUALCOMM=y -CONFIG_NET_VENDOR_RDC=y -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -CONFIG_NET_VENDOR_SAMSUNG=y -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_NET_VENDOR_SIS=y -CONFIG_NET_VENDOR_SMSC=y -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_NET_VENDOR_SUN=y -CONFIG_NET_VENDOR_SYNOPSYS=y -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_NET_VENDOR_TI=y -CONFIG_NET_VENDOR_TOSHIBA=y -CONFIG_NET_VENDOR_VIA=y -CONFIG_NET_VENDOR_WIZNET=y -CONFIG_NET_VENDOR_XILINX=y -CONFIG_NET_VENDOR_XIRCOM=y -# CONFIG_NET_VRF is not set -# CONFIG_NET_XGENE is not set -CONFIG_NEW_LEDS=y -# CONFIG_NFC is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V2_ACL is not set -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFS_ACL_SUPPORT is not set -CONFIG_NFS_COMMON=y -# CONFIG_NFS_FS is not set -# CONFIG_NFS_FSCACHE is not set -# CONFIG_NFS_SWAP is not set -# CONFIG_NFS_V2 is not set -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_V4_1 is not set -# CONFIG_NFTL is not set -# CONFIG_NFT_DUP_IPV4 is not set -# CONFIG_NFT_DUP_IPV6 is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set -# CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CONNTRACK_FTP is not set -# CONFIG_NF_CONNTRACK_H323 is not set -# CONFIG_NF_CONNTRACK_IPV4 is not set -# CONFIG_NF_CONNTRACK_IPV6 is not set -# CONFIG_NF_CONNTRACK_IRC is not set -# CONFIG_NF_CONNTRACK_MARK is not set -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -CONFIG_NF_CONNTRACK_PROCFS=y -# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set -# CONFIG_NF_CONNTRACK_SANE is not set -# CONFIG_NF_CONNTRACK_SIP is not set -# CONFIG_NF_CONNTRACK_SNMP is not set -# CONFIG_NF_CONNTRACK_TFTP is not set -# CONFIG_NF_CONNTRACK_TIMEOUT is not set -# CONFIG_NF_CONNTRACK_TIMESTAMP is not set -# CONFIG_NF_CONNTRACK_ZONES is not set -# CONFIG_NF_CT_NETLINK is not set -# CONFIG_NF_CT_NETLINK_TIMEOUT is not set -# CONFIG_NF_CT_PROTO_DCCP is not set -# CONFIG_NF_CT_PROTO_GRE is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CT_PROTO_UDPLITE is not set -# CONFIG_NF_DEFRAG_IPV4 is not set -# CONFIG_NF_DUP_IPV4 is not set -# CONFIG_NF_DUP_IPV6 is not set -# CONFIG_NF_LOG_ARP is not set -# CONFIG_NF_LOG_IPV4 is not set -# CONFIG_NF_NAT is not set -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_FTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_IPV6 is not set -# CONFIG_NF_NAT_IRC is not set -# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set -# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set -# CONFIG_NF_NAT_NEEDED is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_PROTO_GRE is not set -# CONFIG_NF_NAT_SIP is not set -# CONFIG_NF_NAT_SNMP_BASIC is not set -# CONFIG_NF_NAT_TFTP is not set -# CONFIG_NF_REJECT_IPV4 is not set -# CONFIG_NF_REJECT_IPV6 is not set -# CONFIG_NF_TABLES is not set -# CONFIG_NF_TABLES_NETDEV is not set -# CONFIG_NI65 is not set -# CONFIG_NILFS2_FS is not set -# CONFIG_NIU is not set -CONFIG_NLATTR=y -# CONFIG_NLMON is not set -# CONFIG_NLM_XLP_BOARD is not set -# CONFIG_NLM_XLR_BOARD is not set -# CONFIG_NLS is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_MAC_CELTIC is not set -# CONFIG_NLS_MAC_CENTEURO is not set -# CONFIG_NLS_MAC_CROATIAN is not set -# CONFIG_NLS_MAC_CYRILLIC is not set -# CONFIG_NLS_MAC_GAELIC is not set -# CONFIG_NLS_MAC_GREEK is not set -# CONFIG_NLS_MAC_ICELAND is not set -# CONFIG_NLS_MAC_INUIT is not set -# CONFIG_NLS_MAC_ROMAN is not set -# CONFIG_NLS_MAC_ROMANIAN is not set -# CONFIG_NLS_MAC_TURKISH is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_NOP_USB_XCEIV is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_NOZOMI is not set -# CONFIG_NO_BOOTMEM is not set -# CONFIG_NO_HZ is not set -# CONFIG_NO_HZ_FULL is not set -# CONFIG_NO_HZ_IDLE is not set -# CONFIG_NS83820 is not set -# CONFIG_NTB is not set -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_FS is not set -# CONFIG_NTFS_RW is not set -# CONFIG_NTP_PPS is not set -# CONFIG_NVM is not set -# CONFIG_NVMEM is not set -# CONFIG_NVMEM_IMX_OCOTP is not set -# CONFIG_NVRAM is not set -# CONFIG_NV_TCO is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -# CONFIG_N_GSM is not set -# CONFIG_OABI_COMPAT is not set -# CONFIG_OBS600 is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_OF_OVERLAY is not set -# CONFIG_OF_UNITTEST is not set -# CONFIG_OMAP2_DSS_DEBUG is not set -# CONFIG_OMAP2_DSS_DEBUGFS is not set -# CONFIG_OMAP2_DSS_SDI is not set -# CONFIG_OMAP_OCP2SCP is not set -# CONFIG_OMAP_USB2 is not set -# CONFIG_OMFS_FS is not set -# CONFIG_OPENVSWITCH is not set -# CONFIG_OPROFILE is not set -# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set -# CONFIG_OPT3001 is not set -# CONFIG_ORION_WATCHDOG is not set -# CONFIG_OSF_PARTITION is not set -CONFIG_OVERLAY_FS=y -# CONFIG_OWL_LOADER is not set -# CONFIG_P54_COMMON is not set -# CONFIG_PA12203001 is not set -CONFIG_PACKET=y -# CONFIG_PACKET_DIAG is not set -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_PAGE_OWNER is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_32KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PANASONIC_LAPTOP is not set -# CONFIG_PANEL is not set -CONFIG_PANIC_ON_OOPS=y -CONFIG_PANIC_ON_OOPS_VALUE=1 -CONFIG_PANIC_TIMEOUT=1 -# CONFIG_PANTHERLORD_FF is not set -# CONFIG_PARPORT is not set -# CONFIG_PARPORT_1284 is not set -# CONFIG_PARPORT_AX88796 is not set -# CONFIG_PARPORT_PC is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARASAN_CF is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_ATP867X is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CS5535 is not set -# CONFIG_PATA_CS5536 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IMX is not set -# CONFIG_PATA_ISAPNP is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_LEGACY is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OCTEON_CF is not set -# CONFIG_PATA_OF_PLATFORM is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PCMCIA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_QDI is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RDC is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SCH is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_TOSHIBA is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_WINBOND_VLB is not set -# CONFIG_PC300TOO is not set -# CONFIG_PCCARD is not set -# CONFIG_PCH_GBE is not set -# CONFIG_PCH_PHUB is not set -# CONFIG_PCI200SYN is not set -# CONFIG_PCIEAER_INJECT is not set -# CONFIG_PCIEASPM is not set -# CONFIG_PCIEPORTBUS is not set -# CONFIG_PCIE_ALTERA is not set -# CONFIG_PCIE_ECRC is not set -# CONFIG_PCIE_IPROC is not set -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_PCI_ATMEL is not set -# CONFIG_PCI_CNB20LE_QUIRK is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_PCI_HOST_GENERIC is not set -# CONFIG_PCI_IOV is not set -# CONFIG_PCI_LAYERSCAPE is not set -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_PASID is not set -# CONFIG_PCI_PRI is not set -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set -# CONFIG_PCI_STUB is not set -CONFIG_PCI_SYSCALL=y -# CONFIG_PCMCIA is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_ATMEL is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_PCMCIA_DEBUG is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_FMVJ18X is not set -# CONFIG_PCMCIA_HERMES is not set -# CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_PCNET is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_SPECTRUM is not set -# CONFIG_PCMCIA_SYM53C500 is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_XIRCOM is not set -# CONFIG_PCNET32 is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_PD6729 is not set -# CONFIG_PDA_POWER is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_PERF_EVENTS is not set -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_PHANTOM is not set -# CONFIG_PHONET is not set -# CONFIG_PHYLIB is not set -# CONFIG_PHYS_ADDR_T_64BIT is not set -# CONFIG_PHY_EXYNOS_DP_VIDEO is not set -# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set -# CONFIG_PHY_PXA_28NM_HSIC is not set -# CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_PHY_QCOM_DWC3 is not set -# CONFIG_PHY_SAMSUNG_USB2 is not set -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_PID_NS is not set -CONFIG_PINCONF=y -# CONFIG_PINCTRL is not set -# CONFIG_PINCTRL_AMD is not set -# CONFIG_PINCTRL_EXYNOS is not set -# CONFIG_PINCTRL_EXYNOS5440 is not set -# CONFIG_PINCTRL_MSM8X74 is not set -CONFIG_PINCTRL_SINGLE=y -CONFIG_PINMUX=y -# CONFIG_PKCS7_MESSAGE_PARSER is not set -# CONFIG_PL320_MBOX is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_PLIP is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PM is not set -# CONFIG_PMBUS is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_DEVFREQ is not set -# CONFIG_PM_WAKELOCKS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_POWERCAP is not set -# CONFIG_POWER_AVS is not set -# CONFIG_POWER_RESET is not set -# CONFIG_POWER_RESET_BRCMSTB is not set -# CONFIG_POWER_RESET_GPIO is not set -# CONFIG_POWER_RESET_GPIO_RESTART is not set -# CONFIG_POWER_RESET_LTC2952 is not set -# CONFIG_POWER_RESET_RESTART is not set -# CONFIG_POWER_RESET_SYSCON is not set -# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set -# CONFIG_POWER_RESET_VERSATILE is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PPC4xx_GPIO is not set -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_256K_PAGES is not set -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_64K_PAGES is not set -# CONFIG_PPC_DISABLE_WERROR is not set -# CONFIG_PPC_EMULATED_STATS is not set -# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set -# CONFIG_PPP is not set -# CONFIG_PPPOATM is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_PPP_ASYNC is not set -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPP_DEFLATE is not set -CONFIG_PPP_FILTER=y -# CONFIG_PPP_MPPE is not set -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PPS is not set -# CONFIG_PPS_CLIENT_GPIO is not set -# CONFIG_PPS_CLIENT_KTIMER is not set -# CONFIG_PPS_CLIENT_LDISC is not set -# CONFIG_PPS_CLIENT_PARPORT is not set -# CONFIG_PPS_DEBUG is not set -# CONFIG_PPTP is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_PRINTK=y -# CONFIG_PRINTK_TIME is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_PRISM2_USB is not set -# CONFIG_PRISM54 is not set -# CONFIG_PROC_CHILDREN is not set -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_PROC_STRIPPED=y -CONFIG_PROC_SYSCTL=y -# CONFIG_PROFILE_ALL_BRANCHES is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILING is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_PROVE_RCU is not set -# CONFIG_PROVE_RCU_REPEATEDLY is not set -# CONFIG_PSB6970_PHY is not set -# CONFIG_PSTORE is not set -# CONFIG_PTP_1588_CLOCK is not set -# CONFIG_PTP_1588_CLOCK_IXP46X is not set -# CONFIG_PTP_1588_CLOCK_PCH is not set -# CONFIG_PUBLIC_KEY_ALGO_RSA is not set -# CONFIG_PWM is not set -# CONFIG_PWM_FSL_FTM is not set -# CONFIG_PWM_PCA9685 is not set -# CONFIG_QCA7000 is not set -# CONFIG_QCOM_SPMI_IADC is not set -# CONFIG_QCOM_SPMI_TEMP_ALARM is not set -# CONFIG_QCOM_SPMI_VADC is not set -# CONFIG_QED is not set -# CONFIG_QLA3XXX is not set -# CONFIG_QLCNIC is not set -# CONFIG_QLGE is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX6FS_FS is not set -# CONFIG_QORIQ_CPUFREQ is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_QUOTA is not set -# CONFIG_QUOTACTL is not set -# CONFIG_QUOTA_DEBUG is not set -# CONFIG_R3964 is not set -# CONFIG_R6040 is not set -# CONFIG_R8169 is not set -# CONFIG_R8188EU is not set -# CONFIG_R8712U is not set -# CONFIG_R8723AU is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set -# CONFIG_RAID_ATTRS is not set -# CONFIG_RALINK is not set -# CONFIG_RANDOM32_SELFTEST is not set -# CONFIG_RAPIDIO is not set -# CONFIG_RAS is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_RBTREE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_EQS_DEBUG is not set -# CONFIG_RCU_EXPEDITE_BOOT is not set -CONFIG_RCU_EXPERT=y -CONFIG_RCU_FANOUT=32 -CONFIG_RCU_FANOUT_LEAF=16 -# CONFIG_RCU_FAST_NO_HZ is not set -CONFIG_RCU_KTHREAD_PRIO=0 -# CONFIG_RCU_NOCB_CPU is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3 -# CONFIG_RCU_TRACE is not set -# CONFIG_RC_ATI_REMOTE is not set -# CONFIG_RC_CORE is not set -# CONFIG_RC_DECODERS is not set -# CONFIG_RC_LOOPBACK is not set -# CONFIG_RC_MAP is not set -# CONFIG_RDS is not set -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_GZIP is not set -# CONFIG_RD_LZ4 is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_LZO is not set -# CONFIG_RD_XZ is not set -# CONFIG_READABLE_ASM is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_REDWOOD is not set -# CONFIG_REGMAP is not set -# CONFIG_REGMAP_I2C is not set -# CONFIG_REGMAP_MMIO is not set -# CONFIG_REGMAP_SPI is not set -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_ACT8865 is not set -# CONFIG_REGULATOR_AD5398 is not set -# CONFIG_REGULATOR_ANATOP is not set -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_DA9211 is not set -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FAN53555 is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_GPIO is not set -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_ISL9305 is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -# CONFIG_REGULATOR_MT6311 is not set -# CONFIG_REGULATOR_PFUZE100 is not set -# CONFIG_REGULATOR_PWM is not set -# CONFIG_REGULATOR_TI_ABB is not set -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS6524X is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_REISERFS_FS_POSIX_ACL is not set -# CONFIG_REISERFS_FS_SECURITY is not set -# CONFIG_REISERFS_FS_XATTR is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_RELAY is not set -# CONFIG_RESET_CONTROLLER is not set -# CONFIG_RFD_FTL is not set -CONFIG_RFKILL=y -# CONFIG_RFKILL_FULL is not set -# CONFIG_RFKILL_GPIO is not set -# CONFIG_RFKILL_INPUT is not set -# CONFIG_RFKILL_LEDS is not set -# CONFIG_RFKILL_REGULATOR is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_ROCKER is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_ROSE is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPR0521 is not set -# CONFIG_RT2X00 is not set -# CONFIG_RTC_CLASS is not set -# CONFIG_RTC_DEBUG is not set -# CONFIG_RTC_DRV_ABB5ZES3 is not set -# CONFIG_RTC_DRV_ABX80X is not set -# CONFIG_RTC_DRV_ARMADA38X is not set -# CONFIG_RTC_DRV_AU1XXX is not set -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_BQ4802 is not set -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1685_FAMILY is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DS2404 is not set -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_DS3234 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_EP93XX is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_GENERIC is not set -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -# CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12057 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_MCP795 is not set -# CONFIG_RTC_DRV_MOXART is not set -# CONFIG_RTC_DRV_MPC5121 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_OMAP is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_PCF85063 is not set -# CONFIG_RTC_DRV_PCF8523 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_PL030 is not set -# CONFIG_RTC_DRV_PL031 is not set -# CONFIG_RTC_DRV_PS3 is not set -# CONFIG_RTC_DRV_PT7C4338 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_RTC7301 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set -# CONFIG_RTC_DRV_RV8803 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_SNVS is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_SUN6I is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_XGENE is not set -# CONFIG_RTC_DRV_ZYNQMP is not set -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_LIB=y -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTL8180 is not set -# CONFIG_RTL8187 is not set -# CONFIG_RTL8192E is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTL8306_PHY is not set -# CONFIG_RTL8366RB_PHY is not set -# CONFIG_RTL8366S_PHY is not set -# CONFIG_RTL8366_SMI is not set -# CONFIG_RTL8366_SMI_DEBUG_FS is not set -# CONFIG_RTL8367B_PHY is not set -# CONFIG_RTL8367_PHY is not set -# CONFIG_RTLLIB is not set -# CONFIG_RTL_CARDS is not set -# CONFIG_RTS5208 is not set -CONFIG_RT_MUTEXES=y -# CONFIG_RUNTIME_DEBUG is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_S2IO is not set -# CONFIG_SAMPLES is not set -# CONFIG_SAMSUNG_LAPTOP is not set -# CONFIG_SATA_ACARD_AHCI is not set -# CONFIG_SATA_AHCI is not set -# CONFIG_SATA_AHCI_PLATFORM is not set -# CONFIG_SATA_DWC is not set -# CONFIG_SATA_FSL is not set -# CONFIG_SATA_HIGHBANK is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_SATA_PMP is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_RCAR is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_SVW is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SBC_FITPC2_WATCHDOG is not set -# CONFIG_SC92031 is not set -# CONFIG_SCA3000 is not set -# CONFIG_SCACHE_DEBUGFS is not set -# CONFIG_SCC is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_SCHED_AUTOGROUP is not set -# CONFIG_SCHED_DEBUG is not set -CONFIG_SCHED_HRTICK=y -# CONFIG_SCHED_MC is not set -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_SCHED_SMT is not set -# CONFIG_SCHED_STACK_END_CHECK is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_3W_SAS is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_SCSI_BFA_FC is not set -# CONFIG_SCSI_BNX2X_FCOE is not set -# CONFIG_SCSI_BNX2_ISCSI is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CHELSIO_FCOE is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_SCSI_CXGB4_ISCSI is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_DH is not set -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_ESAS2R is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_HPSA is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_ISCI is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_SCSI_LPFC is not set -CONFIG_SCSI_MOD=y -# CONFIG_SCSI_MPT2SAS is not set -# CONFIG_SCSI_MPT3SAS is not set -# CONFIG_SCSI_MQ_DEFAULT is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVUMI is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PM8001 is not set -# CONFIG_SCSI_PMCRAID is not set -CONFIG_SCSI_PROC_FS=y -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -# CONFIG_SCSI_SNIC is not set -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_UFSHCD is not set -# CONFIG_SCSI_ULTRASTOR is not set -# CONFIG_SCSI_VIRTIO is not set -# CONFIG_SCSI_WD719X is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_SDIO_UART is not set -# CONFIG_SECCOMP is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set -# CONFIG_SENSORS_ACPI_POWER is not set -# CONFIG_SENSORS_AD7314 is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADC128D818 is not set -# CONFIG_SENSORS_ADCXX is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADS1015 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_ADS7871 is not set -# CONFIG_SENSORS_ADT7310 is not set -# CONFIG_SENSORS_ADT7410 is not set -# CONFIG_SENSORS_ADT7411 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_AMC6821 is not set -# CONFIG_SENSORS_APDS990X is not set -# CONFIG_SENSORS_APPLESMC is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ASC7621 is not set -# CONFIG_SENSORS_ATK0110 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_BH1770 is not set -# CONFIG_SENSORS_BH1780 is not set -# CONFIG_SENSORS_CORETEMP is not set -# CONFIG_SENSORS_DELL_SMM is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_DS620 is not set -# CONFIG_SENSORS_EMC1403 is not set -# CONFIG_SENSORS_EMC2103 is not set -# CONFIG_SENSORS_EMC6W201 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_FAM15H_POWER is not set -# CONFIG_SENSORS_FSCHMD is not set -# CONFIG_SENSORS_G760A is not set -# CONFIG_SENSORS_G762 is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_GPIO_FAN is not set -# CONFIG_SENSORS_GSC is not set -# CONFIG_SENSORS_HDAPS is not set -# CONFIG_SENSORS_HIH6130 is not set -# CONFIG_SENSORS_HMC5843 is not set -# CONFIG_SENSORS_HMC5843_I2C is not set -# CONFIG_SENSORS_HMC5843_SPI is not set -# CONFIG_SENSORS_HTU21 is not set -# CONFIG_SENSORS_I5500 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_IIO_HWMON is not set -# CONFIG_SENSORS_INA209 is not set -# CONFIG_SENSORS_INA2XX is not set -# CONFIG_SENSORS_ISL29018 is not set -# CONFIG_SENSORS_ISL29028 is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_JC42 is not set -# CONFIG_SENSORS_K10TEMP is not set -# CONFIG_SENSORS_K8TEMP is not set -# CONFIG_SENSORS_LINEAGE is not set -# CONFIG_SENSORS_LIS3LV02D is not set -# CONFIG_SENSORS_LIS3_I2C is not set -# CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM73 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LM95234 is not set -# CONFIG_SENSORS_LM95241 is not set -# CONFIG_SENSORS_LM95245 is not set -# CONFIG_SENSORS_LTC2945 is not set -# CONFIG_SENSORS_LTC4151 is not set -# CONFIG_SENSORS_LTC4215 is not set -# CONFIG_SENSORS_LTC4222 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_LTC4260 is not set -# CONFIG_SENSORS_LTC4261 is not set -# CONFIG_SENSORS_MAX1111 is not set -# CONFIG_SENSORS_MAX16065 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX1668 is not set -# CONFIG_SENSORS_MAX197 is not set -# CONFIG_SENSORS_MAX31790 is not set -# CONFIG_SENSORS_MAX6639 is not set -# CONFIG_SENSORS_MAX6642 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_MAX6697 is not set -# CONFIG_SENSORS_MCP3021 is not set -# CONFIG_SENSORS_NCT6683 is not set -# CONFIG_SENSORS_NCT6775 is not set -# CONFIG_SENSORS_NCT7802 is not set -# CONFIG_SENSORS_NCT7904 is not set -# CONFIG_SENSORS_NTC_THERMISTOR is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_POWR1220 is not set -# CONFIG_SENSORS_PWM_FAN is not set -# CONFIG_SENSORS_SCH5627 is not set -# CONFIG_SENSORS_SCH5636 is not set -# CONFIG_SENSORS_SCH56XX_COMMON is not set -# CONFIG_SENSORS_SHT15 is not set -# CONFIG_SENSORS_SHT21 is not set -# CONFIG_SENSORS_SHTC1 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMM665 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_TC74 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_TMP102 is not set -# CONFIG_SENSORS_TMP103 is not set -# CONFIG_SENSORS_TMP401 is not set -# CONFIG_SENSORS_TMP421 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_SENSORS_TSL2563 is not set -# CONFIG_SENSORS_VEXPRESS is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VIA_CPUTEMP is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83795 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_ACCENT is not set -# CONFIG_SERIAL_8250_BOCA is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_CS is not set -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_DMA=y -# CONFIG_SERIAL_8250_DW is not set -# CONFIG_SERIAL_8250_EM is not set -# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_FINTEK is not set -# CONFIG_SERIAL_8250_FOURPORT is not set -# CONFIG_SERIAL_8250_HUB6 is not set -# CONFIG_SERIAL_8250_INGENIC is not set -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_MID is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_PCI is not set -# CONFIG_SERIAL_8250_RSA is not set -# CONFIG_SERIAL_8250_RT288X is not set -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_ARC is not set -# CONFIG_SERIAL_BCM63XX is not set -# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_EARLYCON=y -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -# CONFIG_SERIAL_FSL_LPUART is not set -# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set -# CONFIG_SERIAL_PCH_UART is not set -# CONFIG_SERIAL_RP2 is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SH_SCI is not set -# CONFIG_SERIAL_STM32 is not set -# CONFIG_SERIAL_ST_ASC is not set -# CONFIG_SERIAL_TIMBERDALE is not set -# CONFIG_SERIAL_UARTLITE is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -# CONFIG_SERIO is not set -# CONFIG_SERIO_ALTERA_PS2 is not set -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_APBPS2 is not set -# CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_SUN4I_PS2 is not set -# CONFIG_SFC is not set -# CONFIG_SFI is not set -# CONFIG_SGETMASK_SYSCALL is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_SG_SPLIT is not set -CONFIG_SHMEM=y -# CONFIG_SH_ETH is not set -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_SI7005 is not set -# CONFIG_SI7020 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SIGNALFD=y -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set -# CONFIG_SIMPLE_GPIO is not set -# CONFIG_SIS190 is not set -# CONFIG_SIS900 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SKY2_DEBUG is not set -# CONFIG_SLAB is not set -CONFIG_SLABINFO=y -# CONFIG_SLHC is not set -# CONFIG_SLICOSS is not set -# CONFIG_SLIP is not set -# CONFIG_SLOB is not set -CONFIG_SLUB=y -CONFIG_SLUB_CPU_PARTIAL=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_SMARTJOYPLUS_FF is not set -# CONFIG_SMC911X is not set -# CONFIG_SMC9194 is not set -# CONFIG_SMC91X is not set -# CONFIG_SMP is not set -# CONFIG_SMSC911X is not set -# CONFIG_SMSC9420 is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SM_FTL is not set -# CONFIG_SND is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -# CONFIG_SND_AD1816A is not set -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ADLIB is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ALOOP is not set -# CONFIG_SND_ALS100 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_ASIHPI is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_ATMEL_AC97C is not set -# CONFIG_SND_ATMEL_SOC is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT2320 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BCD2000 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4231 is not set -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_CS5535AUDIO is not set -# CONFIG_SND_CTXFI is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_DEBUG is not set -# CONFIG_SND_DESIGNWARE_I2S is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_EMU10K1_SEQ is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FIREWIRE is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_HDA_INTEL is not set -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -CONFIG_SND_HDA_PREALLOC_SIZE=64 -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_HWDEP is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_INDIGODJX is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGOIOX is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_ISA is not set -# CONFIG_SND_KIRKWOOD_SOC is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_LOLA is not set -# CONFIG_SND_LX6464ES is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_MIPS is not set -# CONFIG_SND_MIRO is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MPC52xx_SOC_EFIKA is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_MTS64 is not set -# CONFIG_SND_MXS_SOC is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_OPL3_LIB_SEQ is not set -# CONFIG_SND_OPL4_LIB_SEQ is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -CONFIG_SND_OSSEMUL=y -# CONFIG_SND_OXYGEN is not set -CONFIG_SND_PCI=y -# CONFIG_SND_PCM is not set -# CONFIG_SND_PCMCIA is not set -# CONFIG_SND_PCM_OSS is not set -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_PCM_TIMER is not set -# CONFIG_SND_PCM_XRUN_DEBUG is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_PDAUDIOCF is not set -# CONFIG_SND_PORTMAN2X4 is not set -# CONFIG_SND_POWERPC_SOC is not set -# CONFIG_SND_PPC is not set -CONFIG_SND_PROC_FS=y -# CONFIG_SND_RAWMIDI is not set -# CONFIG_SND_RAWMIDI_SEQ is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_RTCTIMER is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_SBAWE_SEQ is not set -# CONFIG_SND_SE6X is not set -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_SIMPLE_CARD is not set -# CONFIG_SND_SIS7019 is not set -# CONFIG_SND_SOC is not set -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4613 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_ALC5623 is not set -# CONFIG_SND_SOC_AU1XAUDIO is not set -# CONFIG_SND_SOC_AU1XPSC is not set -# CONFIG_SND_SOC_CS35L32 is not set -# CONFIG_SND_SOC_CS4265 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271 is not set -# CONFIG_SND_SOC_CS4271_I2C is not set -# CONFIG_SND_SOC_CS4271_SPI is not set -# CONFIG_SND_SOC_CS42L51_I2C is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_CS4349 is not set -# CONFIG_SND_SOC_ES8328 is not set -# CONFIG_SND_SOC_EUKREA_TLV320 is not set -# CONFIG_SND_SOC_FSL_ASOC_CARD is not set -# CONFIG_SND_SOC_FSL_ASRC is not set -# CONFIG_SND_SOC_FSL_ESAI is not set -# CONFIG_SND_SOC_FSL_SAI is not set -# CONFIG_SND_SOC_FSL_SPDIF is not set -# CONFIG_SND_SOC_FSL_SSI is not set -# CONFIG_SND_SOC_GTM601 is not set -# CONFIG_SND_SOC_IMX_AUDMUX is not set -# CONFIG_SND_SOC_IMX_ES8328 is not set -# CONFIG_SND_SOC_IMX_SPDIF is not set -# CONFIG_SND_SOC_IMX_WM8962 is not set -# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set -# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set -# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set -# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set -# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set -# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set -# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set -# CONFIG_SND_SOC_INTEL_SST is not set -# CONFIG_SND_SOC_MEDIATEK is not set -# CONFIG_SND_SOC_MPC5200_AC97 is not set -# CONFIG_SND_SOC_MPC5200_I2S is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1792A is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -# CONFIG_SND_SOC_QCOM is not set -# CONFIG_SND_SOC_RT5631 is not set -# CONFIG_SND_SOC_RT5677_SPI is not set -# CONFIG_SND_SOC_SGTL5000 is not set -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_SSM2602_I2C is not set -# CONFIG_SND_SOC_SSM2602_SPI is not set -# CONFIG_SND_SOC_SSM4567 is not set -# CONFIG_SND_SOC_STA32X is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_STI_SAS is not set -# CONFIG_SND_SOC_TAS2552 is not set -# CONFIG_SND_SOC_TAS5086 is not set -# CONFIG_SND_SOC_TAS571X is not set -# CONFIG_SND_SOC_TFA9879 is not set -# CONFIG_SND_SOC_TLV320AIC23_I2C is not set -# CONFIG_SND_SOC_TLV320AIC23_SPI is not set -# CONFIG_SND_SOC_TLV320AIC31XX is not set -# CONFIG_SND_SOC_TLV320AIC3X is not set -# CONFIG_SND_SOC_TPA6130A2 is not set -# CONFIG_SND_SOC_TS3A227E is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8804_I2C is not set -# CONFIG_SND_SOC_WM8804_SPI is not set -# CONFIG_SND_SOC_WM8903 is not set -# CONFIG_SND_SOC_WM8962 is not set -# CONFIG_SND_SOC_WM8978 is not set -# CONFIG_SND_SOC_XTFPGA_I2S is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_SSCAPE is not set -# CONFIG_SND_SUN4I_CODEC is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_TIMER is not set -# CONFIG_SND_TRIDENT is not set -CONFIG_SND_USB=y -# CONFIG_SND_USB_6FIRE is not set -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_USB_HIFACE is not set -# CONFIG_SND_USB_POD is not set -# CONFIG_SND_USB_PODHD is not set -# CONFIG_SND_USB_TONEPORT is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_US122L is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_VARIAX is not set -# CONFIG_SND_VERBOSE_PRINTK is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_WAVEFRONT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SNI_RM is not set -# CONFIG_SOC_AM33XX is not set -# CONFIG_SOC_AM43XX is not set -# CONFIG_SOC_BRCMSTB is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_SOC_DRA7XX is not set -# CONFIG_SOC_HAS_OMAP2_SDRC is not set -# CONFIG_SOC_OMAP5 is not set -# CONFIG_SOC_TI is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_SONYPI is not set -# CONFIG_SONY_LAPTOP is not set -# CONFIG_SOUND is not set -# CONFIG_SOUND_OSS_CORE is not set -# CONFIG_SOUND_PRIME is not set -# CONFIG_SP5100_TCO is not set -# CONFIG_SPARSEMEM_MANUAL is not set -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -# CONFIG_SPARSE_IRQ is not set -# CONFIG_SPARSE_RCU_POINTER is not set -# CONFIG_SPEAKUP is not set -# CONFIG_SPI is not set -# CONFIG_SPINLOCK_TEST is not set -# CONFIG_SPI_ALTERA is not set -# CONFIG_SPI_AU1550 is not set -# CONFIG_SPI_BCM2835 is not set -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_BUTTERFLY is not set -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_DEBUG is not set -# CONFIG_SPI_DESIGNWARE is not set -# CONFIG_SPI_FSL_DSPI is not set -# CONFIG_SPI_FSL_ESPI is not set -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_GPIO is not set -# CONFIG_SPI_GPIO_OLD is not set -# CONFIG_SPI_IMG_SPFI is not set -# CONFIG_SPI_LM70_LLP is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_SPI_MPC52xx is not set -# CONFIG_SPI_MPC52xx_PSC is not set -# CONFIG_SPI_OCTEON is not set -# CONFIG_SPI_OC_TINY is not set -# CONFIG_SPI_ORION is not set -# CONFIG_SPI_PL022 is not set -# CONFIG_SPI_PPC4xx is not set -# CONFIG_SPI_PXA2XX is not set -# CONFIG_SPI_PXA2XX_PCI is not set -# CONFIG_SPI_ROCKCHIP is not set -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TI_QSPI is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPI_TOPCLIFF_PCH is not set -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_XWAY is not set -# CONFIG_SPI_ZYNQMP_GQSPI is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_SPMI is not set -CONFIG_SQUASHFS=y -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_LZ4 is not set -# CONFIG_SQUASHFS_LZO is not set -# CONFIG_SQUASHFS_XATTR is not set -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZLIB is not set -# CONFIG_SRAM is not set -# CONFIG_SSB is not set -# CONFIG_SSB_DEBUG is not set -# CONFIG_SSB_DRIVER_GPIO is not set -# CONFIG_SSB_HOST_SOC is not set -# CONFIG_SSB_PCMCIAHOST is not set -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB_SDIOHOST is not set -# CONFIG_SSB_SILENT is not set -# CONFIG_SSFDC is not set -# CONFIG_STACKTRACE is not set -CONFIG_STACKTRACE_SUPPORT=y -# CONFIG_STACK_TRACER is not set -CONFIG_STAGING=y -# CONFIG_STAGING_BOARD is not set -# CONFIG_STAGING_MEDIA is not set -CONFIG_STANDALONE=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_STDBINUTILS=y -# CONFIG_STE10XP is not set -# CONFIG_STE_MODEM_RPROC is not set -# CONFIG_STK3310 is not set -# CONFIG_STK8312 is not set -# CONFIG_STK8BA50 is not set -# CONFIG_STM is not set -# CONFIG_STMMAC_ETH is not set -# CONFIG_STMMAC_PCI is not set -# CONFIG_STMMAC_PLATFORM is not set -# CONFIG_STM_DUMMY is not set -# CONFIG_STM_SOURCE_CONSOLE is not set -CONFIG_STP=y -# CONFIG_STRICT_DEVMEM is not set -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_SUNDANCE is not set -# CONFIG_SUNGEM is not set -# CONFIG_SUNRPC is not set -# CONFIG_SUNRPC_DEBUG is not set -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SUNXI_SRAM is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_SUSPEND is not set -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_SWAP=y -# CONFIG_SWCONFIG is not set -# CONFIG_SWCONFIG_B53 is not set -# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set -# CONFIG_SWCONFIG_LEDS is not set -# CONFIG_SX9500 is not set -# CONFIG_SXGBE_ETH is not set -# CONFIG_SYNCLINK_CS is not set -# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set -CONFIG_SYN_COOKIES=y -CONFIG_SYSCTL=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_SYSFS=y -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_SYSFS_SYSCALL is not set -# CONFIG_SYSTEMPORT is not set -# CONFIG_SYSTEM_DATA_VERIFICATION is not set -# CONFIG_SYSTEM_TRUSTED_KEYRING is not set -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSV68_PARTITION is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_SYSV_FS is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_T5403 is not set -# CONFIG_TARGET_CORE is not set -# CONFIG_TASKSTATS is not set -# CONFIG_TASKS_RCU is not set -# CONFIG_TASK_XACCT is not set -# CONFIG_TC35815 is not set -# CONFIG_TCG_ATMEL is not set -# CONFIG_TCG_INFINEON is not set -# CONFIG_TCG_ST33_I2C is not set -# CONFIG_TCG_TIS is not set -# CONFIG_TCG_TIS_I2C_ATMEL is not set -# CONFIG_TCG_TIS_I2C_INFINEON is not set -# CONFIG_TCG_TIS_I2C_NUVOTON is not set -# CONFIG_TCG_TIS_ST33ZP24 is not set -# CONFIG_TCG_TPM is not set -# CONFIG_TCG_XEN is not set -# CONFIG_TCIC is not set -CONFIG_TCP_CONG_ADVANCED=y -# CONFIG_TCP_CONG_BIC is not set -# CONFIG_TCP_CONG_CDG is not set -CONFIG_TCP_CONG_CUBIC=y -# CONFIG_TCP_CONG_DCTCP is not set -# CONFIG_TCP_CONG_HSTCP is not set -# CONFIG_TCP_CONG_HTCP is not set -# CONFIG_TCP_CONG_HYBLA is not set -# CONFIG_TCP_CONG_ILLINOIS is not set -# CONFIG_TCP_CONG_LP is not set -# CONFIG_TCP_CONG_SCALABLE is not set -# CONFIG_TCP_CONG_VEGAS is not set -# CONFIG_TCP_CONG_VENO is not set -# CONFIG_TCP_CONG_WESTWOOD is not set -# CONFIG_TCP_CONG_YEAH is not set -# CONFIG_TCP_MD5SIG is not set -# CONFIG_TCS3414 is not set -# CONFIG_TCS3472 is not set -# CONFIG_TEGRA_AHB is not set -# CONFIG_TEGRA_HOST1X is not set -# CONFIG_TEHUTI is not set -# CONFIG_TERANETICS_PHY is not set -# CONFIG_TEST_BPF is not set -# CONFIG_TEST_FIRMWARE is not set -# CONFIG_TEST_HEXDUMP is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_LKM is not set -# CONFIG_TEST_POWER is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_STATIC_KEYS is not set -# CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_UDELAY is not set -# CONFIG_TEST_USER_COPY is not set -CONFIG_TEXTSEARCH=y -# CONFIG_TEXTSEARCH_BM is not set -# CONFIG_TEXTSEARCH_FSM is not set -# CONFIG_TEXTSEARCH_KMP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_EMULATION is not set -# CONFIG_THERMAL_GOV_BANG_BANG is not set -# CONFIG_THERMAL_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -# CONFIG_THERMAL_GOV_USER_SPACE is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_THERMAL_WRITABLE_TRIPS is not set -# CONFIG_THINKPAD_ACPI is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_THUNDERBOLT is not set -# CONFIG_TICK_CPU_ACCOUNTING is not set -CONFIG_TICK_ONESHOT=y -# CONFIG_TIFM_CORE is not set -# CONFIG_TIGON3 is not set -# CONFIG_TIMB_DMA is not set -CONFIG_TIMERFD=y -# CONFIG_TIMER_STATS is not set -CONFIG_TINY_RCU=y -# CONFIG_TIPC is not set -# CONFIG_TI_ADC081C is not set -# CONFIG_TI_ADC128S052 is not set -# CONFIG_TI_AM335X_ADC is not set -# CONFIG_TI_CPSW is not set -# CONFIG_TI_CPSW_ALE is not set -# CONFIG_TI_CPTS is not set -# CONFIG_TI_DAC7512 is not set -# CONFIG_TI_DAVINCI_CPDMA is not set -# CONFIG_TI_DAVINCI_MDIO is not set -# CONFIG_TI_ST is not set -# CONFIG_TLAN is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_TMP006 is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -CONFIG_TMPFS_XATTR=y -# CONFIG_TOPSTAR_LAPTOP is not set -# CONFIG_TORTURE_TEST is not set -# CONFIG_TOSHIBA_HAPS is not set -# CONFIG_TOUCHSCREEN_AD7877 is not set -# CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_AD7879_I2C is not set -# CONFIG_TOUCHSCREEN_AD7879_SPI is not set -# CONFIG_TOUCHSCREEN_ADS7846 is not set -# CONFIG_TOUCHSCREEN_AR1021_I2C is not set -# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set -# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set -# CONFIG_TOUCHSCREEN_BU21013 is not set -# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set -# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set -# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set -# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set -# CONFIG_TOUCHSCREEN_DYNAPRO is not set -# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set -# CONFIG_TOUCHSCREEN_EETI is not set -# CONFIG_TOUCHSCREEN_EGALAX is not set -# CONFIG_TOUCHSCREEN_ELAN is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_FT6236 is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GOODIX is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set -# CONFIG_TOUCHSCREEN_ILI210X is not set -# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set -# CONFIG_TOUCHSCREEN_INEXIO is not set -# CONFIG_TOUCHSCREEN_MAX11801 is not set -# CONFIG_TOUCHSCREEN_MCS5000 is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_MMS114 is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_PIXCIR is not set -# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set -# CONFIG_TOUCHSCREEN_S3C2410 is not set -# CONFIG_TOUCHSCREEN_ST1232 is not set -# CONFIG_TOUCHSCREEN_SUR40 is not set -# CONFIG_TOUCHSCREEN_SX8654 is not set -# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set -# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_TPS6507X is not set -# CONFIG_TOUCHSCREEN_TSC2004 is not set -# CONFIG_TOUCHSCREEN_TSC2005 is not set -# CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_TOUCHSCREEN_TSC_SERIO is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_TOUCHSCREEN_W90X900 is not set -# CONFIG_TOUCHSCREEN_WACOM_I2C is not set -# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set -# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set -# CONFIG_TOUCHSCREEN_WM97XX is not set -# CONFIG_TOUCHSCREEN_ZFORCE is not set -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_TRACER_SNAPSHOT is not set -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_TRACE_ENUM_MAP_FILE is not set -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_TRACE_SINK is not set -# CONFIG_TRACING_EVENTS_GPIO is not set -CONFIG_TRACING_SUPPORT=y -CONFIG_TRAD_SIGNALS=y -# CONFIG_TRANSPARENT_HUGEPAGE is not set -# CONFIG_TREE_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_TRUSTED_KEYS is not set -# CONFIG_TSL2583 is not set -# CONFIG_TSL2x7x is not set -# CONFIG_TSL4531 is not set -# CONFIG_TSYS01 is not set -# CONFIG_TSYS02D is not set -# CONFIG_TTPCI_EEPROM is not set -CONFIG_TTY=y -# CONFIG_TTY_PRINTK is not set -# CONFIG_TUN is not set -# CONFIG_TUN_VNET_CROSS_LE is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_TWL4030_MADC is not set -# CONFIG_TWL6030_GPADC is not set -# CONFIG_TWL6040_CORE is not set -# CONFIG_TYPHOON is not set -# CONFIG_UACCESS_WITH_MEMCPY is not set -# CONFIG_UBIFS_ATIME_SUPPORT is not set -# CONFIG_UCB1400_CORE is not set -# CONFIG_UDF_FS is not set -CONFIG_UDF_NLS=y -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_UFS_FS is not set -# CONFIG_UHID is not set -CONFIG_UID16=y -# CONFIG_UIO is not set -# CONFIG_ULTRA is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_UNIX=y -CONFIG_UNIX98_PTYS=y -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_UNIX_DIAG is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_UPROBES is not set -# CONFIG_UPROBE_EVENT is not set -# CONFIG_US5182D is not set -# CONFIG_USB is not set -# CONFIG_USBIP_CORE is not set -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_ALI_M5632=y -# CONFIG_USB_AMD5536UDC is not set -CONFIG_USB_AN2720=y -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set -# CONFIG_USB_APPLEDISPLAY is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_ATM is not set -# CONFIG_USB_BDC_UDC is not set -CONFIG_USB_BELKIN=y -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_CHAOSKEY is not set -# CONFIG_USB_CHIPIDEA is not set -# CONFIG_USB_CONFIGFS is not set -# CONFIG_USB_CXACRU is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -CONFIG_USB_DEFAULT_PERSIST=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_DUMMY_HCD is not set -# CONFIG_USB_DWC2 is not set -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_DUAL_ROLE is not set -# CONFIG_USB_DWC2_HOST is not set -# CONFIG_USB_DWC2_PERIPHERAL is not set -# CONFIG_USB_DWC3 is not set -# CONFIG_USB_DWC3_EXYNOS is not set -# CONFIG_USB_DWC3_KEYSTONE is not set -# CONFIG_USB_DWC3_PCI is not set -# CONFIG_USB_DWC3_QCOM is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_EHCI_ATH79 is not set -# CONFIG_USB_EHCI_HCD_AT91 is not set -# CONFIG_USB_EHCI_HCD_PPC_OF is not set -# CONFIG_USB_EHCI_MSM is not set -# CONFIG_USB_EHCI_MV is not set -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_EHSET_TEST_FIXTURE is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EPSON2888 is not set -# CONFIG_USB_EZUSB_FX2 is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_FOTG210_UDC is not set -# CONFIG_USB_FSL_USB2 is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_FUNCTIONFS is not set -# CONFIG_USB_FUSB300 is not set -# CONFIG_USB_GADGET is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -CONFIG_USB_GADGET_VBUS_DRAW=2 -# CONFIG_USB_GADGET_XILINX is not set -# CONFIG_USB_GL860 is not set -# CONFIG_USB_GOKU is not set -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_GR_UDC is not set -# CONFIG_USB_GSPCA is not set -# CONFIG_USB_GSPCA_BENQ is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_CPIA1 is not set -# CONFIG_USB_GSPCA_DTCS033 is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set -# CONFIG_USB_GSPCA_JEILINJ is not set -# CONFIG_USB_GSPCA_JL2005BCD is not set -# CONFIG_USB_GSPCA_KINECT is not set -# CONFIG_USB_GSPCA_KONICA is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_NW80X is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_OV534_9 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7302 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SE401 is not set -# CONFIG_USB_GSPCA_SN9C2028 is not set -# CONFIG_USB_GSPCA_SN9C20X is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA1528 is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_SQ930X is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_STK1135 is not set -# CONFIG_USB_GSPCA_STV0680 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TOPRO is not set -# CONFIG_USB_GSPCA_TOUPTEK is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_VICAM is not set -# CONFIG_USB_GSPCA_XIRLINK_CIT is not set -# CONFIG_USB_GSPCA_ZC3XX is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_NCM is not set -# CONFIG_USB_G_NOKIA is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_G_WEBCAM is not set -# CONFIG_USB_HCD_TEST_MODE is not set -# CONFIG_USB_HID is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_HSIC_USB3503 is not set -# CONFIG_USB_HSO is not set -# CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_IPHETH is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1301 is not set -# CONFIG_USB_ISP1362_HCD is not set -# CONFIG_USB_ISP1760 is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_KC2190 is not set -# CONFIG_USB_LAN78XX is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set -# CONFIG_USB_LED_TRIG is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LINK_LAYER_TEST is not set -# CONFIG_USB_M5602 is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_MAX3421_HCD is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_MON is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_MSM_OTG is not set -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_MV_U3D is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_MXS_PHY is not set -# CONFIG_USB_NET2272 is not set -# CONFIG_USB_NET2280 is not set -# CONFIG_USB_NET_AX88179_178A is not set -# CONFIG_USB_NET_AX8817X is not set -# CONFIG_USB_NET_CDCETHER is not set -# CONFIG_USB_NET_CDC_EEM is not set -# CONFIG_USB_NET_CDC_MBIM is not set -# CONFIG_USB_NET_CDC_NCM is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_CH9200 is not set -# CONFIG_USB_NET_CX82310_ETH is not set -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_DRIVERS is not set -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set -# CONFIG_USB_NET_INT51X1 is not set -# CONFIG_USB_NET_KALMIA is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_QMI_WWAN is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_USB_NET_SMSC75XX is not set -# CONFIG_USB_NET_SMSC95XX is not set -# CONFIG_USB_NET_SR9700 is not set -# CONFIG_USB_NET_SR9800 is not set -# CONFIG_USB_NET_ZAURUS is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_OHCI_HCD_PCI is not set -# CONFIG_USB_OHCI_HCD_PPC_OF is not set -# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set -# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set -# CONFIG_USB_OHCI_HCD_SSB is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_OTG_FSM is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_PHY is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_PWC_INPUT_EVDEV is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_RCAR_PHY is not set -# CONFIG_USB_RENESAS_USBHS is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_RTL8152 is not set -# CONFIG_USB_S2255 is not set -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_CP210X is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_DEBUG is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_F81232 is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_GARMIN is not set -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_IUU is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_METRO is not set -# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_MXUPORT is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_OPTICON is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_QCAUX is not set -# CONFIG_USB_SERIAL_QT2 is not set -# CONFIG_USB_SERIAL_QUALCOMM is not set -# CONFIG_USB_SERIAL_SAFE is not set -CONFIG_USB_SERIAL_SAFE_PADDED=y -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -# CONFIG_USB_SERIAL_SIMPLE is not set -# CONFIG_USB_SERIAL_SPCP8X5 is not set -# CONFIG_USB_SERIAL_SSU100 is not set -# CONFIG_USB_SERIAL_SYMBOL is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_WISHBONE is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_XSENS_MT is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_SIERRA_NET is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_SPEEDTOUCH is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_ENE_UB6250 is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_REALTEK is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STV06XX is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_USB_SWITCH_FSA9480 is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_TMC is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_UAS is not set -# CONFIG_USB_UEAGLEATM is not set -# CONFIG_USB_ULPI is not set -# CONFIG_USB_ULPI_BUS is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_USS720 is not set -# CONFIG_USB_VIDEO_CLASS is not set -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -# CONFIG_USB_VL600 is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set -# CONFIG_USB_XHCI_HCD is not set -# CONFIG_USB_XUSBATM is not set -# CONFIG_USB_YUREX is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_ZR364XX is not set -# CONFIG_USELIB is not set -# CONFIG_USERFAULTFD is not set -# CONFIG_USE_OF is not set -# CONFIG_UTS_NS is not set -# CONFIG_UWB is not set -# CONFIG_V4L_MEM2MEM_DRIVERS is not set -# CONFIG_V4L_TEST_DRIVERS is not set -# CONFIG_VCNL4000 is not set -# CONFIG_VDSO is not set -# CONFIG_VETH is not set -# CONFIG_VEXPRESS_CONFIG is not set -# CONFIG_VF610_ADC is not set -# CONFIG_VFAT_FS is not set -# CONFIG_VGASTATE is not set -# CONFIG_VGA_ARB is not set -# CONFIG_VGA_SWITCHEROO is not set -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set -# CONFIG_VHOST_NET is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_VIDEO_ADV7170 is not set -# CONFIG_VIDEO_ADV7175 is not set -# CONFIG_VIDEO_ADV7180 is not set -# CONFIG_VIDEO_ADV7183 is not set -# CONFIG_VIDEO_ADV7343 is not set -# CONFIG_VIDEO_ADV7393 is not set -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_AK881X is not set -# CONFIG_VIDEO_BT819 is not set -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_BT856 is not set -# CONFIG_VIDEO_BT866 is not set -# CONFIG_VIDEO_CAFE_CCIC is not set -# CONFIG_VIDEO_CS5345 is not set -# CONFIG_VIDEO_CS53L32A is not set -# CONFIG_VIDEO_CX231XX is not set -# CONFIG_VIDEO_CX2341X is not set -# CONFIG_VIDEO_CX25840 is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_DM6446_CCDC is not set -# CONFIG_VIDEO_DT3155 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -# CONFIG_VIDEO_GO7007 is not set -# CONFIG_VIDEO_HDPVR is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_IR_I2C is not set -# CONFIG_VIDEO_IVTV is not set -# CONFIG_VIDEO_KS0127 is not set -# CONFIG_VIDEO_M52790 is not set -# CONFIG_VIDEO_ML86V7667 is not set -# CONFIG_VIDEO_MSP3400 is not set -# CONFIG_VIDEO_MT9V011 is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_NOON010PC30 is not set -# CONFIG_VIDEO_OMAP2_VOUT is not set -# CONFIG_VIDEO_OV2659 is not set -# CONFIG_VIDEO_OV7640 is not set -# CONFIG_VIDEO_OV7670 is not set -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_SAA6588 is not set -# CONFIG_VIDEO_SAA6752HS is not set -# CONFIG_VIDEO_SAA7110 is not set -# CONFIG_VIDEO_SAA711X is not set -# CONFIG_VIDEO_SAA7127 is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_SAA717X is not set -# CONFIG_VIDEO_SAA7185 is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set -# CONFIG_VIDEO_SONY_BTF_MPX is not set -# CONFIG_VIDEO_SR030PC30 is not set -# CONFIG_VIDEO_TDA7432 is not set -# CONFIG_VIDEO_TDA9840 is not set -# CONFIG_VIDEO_TEA6415C is not set -# CONFIG_VIDEO_TEA6420 is not set -# CONFIG_VIDEO_THS7303 is not set -# CONFIG_VIDEO_THS8200 is not set -# CONFIG_VIDEO_TIMBERDALE is not set -# CONFIG_VIDEO_TLV320AIC23B is not set -# CONFIG_VIDEO_TM6000 is not set -# CONFIG_VIDEO_TVAUDIO is not set -# CONFIG_VIDEO_TVP514X is not set -# CONFIG_VIDEO_TVP5150 is not set -# CONFIG_VIDEO_TVP7002 is not set -# CONFIG_VIDEO_TW2804 is not set -# CONFIG_VIDEO_TW9903 is not set -# CONFIG_VIDEO_TW9906 is not set -# CONFIG_VIDEO_UDA1342 is not set -# CONFIG_VIDEO_UPD64031A is not set -# CONFIG_VIDEO_UPD64083 is not set -# CONFIG_VIDEO_USBTV is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_VIDEO_V4L2 is not set -# CONFIG_VIDEO_VP27SMPX is not set -# CONFIG_VIDEO_VPX3220 is not set -# CONFIG_VIDEO_VS6624 is not set -# CONFIG_VIDEO_WM8739 is not set -# CONFIG_VIDEO_WM8775 is not set -# CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIRTIO_BALLOON is not set -# CONFIG_VIRTIO_INPUT is not set -# CONFIG_VIRTIO_MMIO is not set -# CONFIG_VIRTIO_PCI is not set -# CONFIG_VIRTUALIZATION is not set -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_VIRT_DRIVERS is not set -CONFIG_VIRT_TO_BUS=y -# CONFIG_VITESSE_PHY is not set -CONFIG_VLAN_8021Q=y -# CONFIG_VLAN_8021Q_GVRP is not set -# CONFIG_VLAN_8021Q_MVRP is not set -# CONFIG_VME_BUS is not set -# CONFIG_VMSPLIT_1G is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMWARE_PVSCSI is not set -# CONFIG_VMXNET3 is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_VORTEX is not set -# CONFIG_VSOCKETS is not set -# CONFIG_VT is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set -# CONFIG_VXFS_FS is not set -# CONFIG_VXGE is not set -# CONFIG_VXLAN is not set -# CONFIG_VZ89X is not set -# CONFIG_W1 is not set -# CONFIG_W1_CON is not set -# CONFIG_W1_MASTER_DS1WM is not set -# CONFIG_W1_MASTER_DS2482 is not set -# CONFIG_W1_MASTER_DS2490 is not set -# CONFIG_W1_MASTER_GPIO is not set -# CONFIG_W1_MASTER_MATROX is not set -# CONFIG_W1_SLAVE_BQ27000 is not set -# CONFIG_W1_SLAVE_DS2406 is not set -# CONFIG_W1_SLAVE_DS2408 is not set -# CONFIG_W1_SLAVE_DS2413 is not set -# CONFIG_W1_SLAVE_DS2423 is not set -# CONFIG_W1_SLAVE_DS2431 is not set -# CONFIG_W1_SLAVE_DS2433 is not set -# CONFIG_W1_SLAVE_DS2760 is not set -# CONFIG_W1_SLAVE_DS2780 is not set -# CONFIG_W1_SLAVE_DS2781 is not set -# CONFIG_W1_SLAVE_DS28E04 is not set -# CONFIG_W1_SLAVE_SMEM is not set -# CONFIG_W1_SLAVE_THERM is not set -# CONFIG_W83627HF_WDT is not set -# CONFIG_W83877F_WDT is not set -# CONFIG_W83977F_WDT is not set -# CONFIG_WAN is not set -# CONFIG_WANXL is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_CORE is not set -# CONFIG_WATCHDOG_NOWAYOUT is not set -# CONFIG_WD80x3 is not set -# CONFIG_WDTPCI is not set -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PRIV=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WILINK_PLATFORM_DATA=y -# CONFIG_WIMAX is not set -# CONFIG_WIMAX_GDM72XX is not set -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -# CONFIG_WIZNET_W5100 is not set -# CONFIG_WIZNET_W5300 is not set -# CONFIG_WL1251 is not set -# CONFIG_WL12XX is not set -# CONFIG_WL18XX is not set -CONFIG_WLAN=y -# CONFIG_WLCORE is not set -# CONFIG_WL_MEDIATEK is not set -CONFIG_WL_TI=y -CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y -# CONFIG_X25 is not set -# CONFIG_X509_CERTIFICATE_PARSER is not set -# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set -# CONFIG_X86_PKG_TEMP_THERMAL is not set -CONFIG_X86_SYSFB=y -# CONFIG_XEN is not set -CONFIG_XFRM=y -# CONFIG_XFRM_IPCOMP is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_USER is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_XFS_FS is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XILINX_AXI_EMAC is not set -# CONFIG_XILINX_EMACLITE is not set -# CONFIG_XILINX_LL_TEMAC is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_XILLYBUS is not set -# CONFIG_XIP_KERNEL is not set -# CONFIG_XMON is not set -CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_ARM is not set -# CONFIG_XZ_DEC_ARMTHUMB is not set -# CONFIG_XZ_DEC_BCJ is not set -# CONFIG_XZ_DEC_IA64 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_SPARC is not set -# CONFIG_XZ_DEC_TEST is not set -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_YAM is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_YENTA is not set -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -# CONFIG_YENTA_TI is not set -# CONFIG_YENTA_TOSHIBA is not set -# CONFIG_ZBUD is not set -# CONFIG_ZD1211RW is not set -# CONFIG_ZD1211RW_DEBUG is not set -# CONFIG_ZEROPLUS_FF is not set -# CONFIG_ZISOFS is not set -# CONFIG_ZLIB_DEFLATE is not set -# CONFIG_ZLIB_INFLATE is not set -CONFIG_ZONE_DMA=y -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_ZPOOL is not set -# CONFIG_ZRAM is not set -# CONFIG_ZSMALLOC is not set diff --git a/target/linux/generic/pending-4.4/001-mtdsplit_backport.patch b/target/linux/generic/pending-4.4/001-mtdsplit_backport.patch deleted file mode 100644 index b5c485fe13..0000000000 --- a/target/linux/generic/pending-4.4/001-mtdsplit_backport.patch +++ /dev/null @@ -1,153 +0,0 @@ ---- a/drivers/mtd/mtdsplit/mtdsplit_brnimage.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_brnimage.c -@@ -27,7 +27,7 @@ - #define BRNIMAGE_MAX_OVERHEAD (BRNIMAGE_ALIGN_BYTES + BRNIMAGE_FOOTER_SIZE) - - static int mtdsplit_parse_brnimage(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct mtd_partition *parts; ---- a/drivers/mtd/mtdsplit/mtdsplit_eva.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_eva.c -@@ -29,7 +29,7 @@ struct eva_image_header { - }; - - static int mtdsplit_parse_eva(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct mtd_partition *parts; ---- a/drivers/mtd/mtdsplit/mtdsplit_fit.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_fit.c -@@ -45,8 +45,7 @@ struct fdt_header { - }; - - static int --mtdsplit_fit_parse(struct mtd_info *mtd, -- const struct mtd_partition **pparts, -+mtdsplit_fit_parse(struct mtd_info *mtd, struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct fdt_header hdr; ---- a/drivers/mtd/mtdsplit/mtdsplit_lzma.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_lzma.c -@@ -28,7 +28,7 @@ struct lzma_header { - }; - - static int mtdsplit_parse_lzma(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct lzma_header hdr; ---- a/drivers/mtd/mtdsplit/mtdsplit_seama.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_seama.c -@@ -30,7 +30,7 @@ struct seama_header { - }; - - static int mtdsplit_parse_seama(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct seama_header hdr; ---- a/drivers/mtd/mtdsplit/mtdsplit_squashfs.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_squashfs.c -@@ -23,7 +23,7 @@ - - static int - mtdsplit_parse_squashfs(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct mtd_partition *part; ---- a/drivers/mtd/mtdsplit/mtdsplit_tplink.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_tplink.c -@@ -83,8 +83,8 @@ struct tplink_fw_header { - }; - - static int mtdsplit_parse_tplink(struct mtd_info *master, -- const struct mtd_partition **pparts, -- struct mtd_part_parser_data *data) -+ struct mtd_partition **pparts, -+ struct mtd_part_parser_data *data) - { - struct tplink_fw_header hdr; - size_t hdr_len, retlen, kernel_size; ---- a/drivers/mtd/mtdsplit/mtdsplit_trx.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_trx.c -@@ -56,7 +56,7 @@ read_trx_header(struct mtd_info *mtd, si - - static int - mtdsplit_parse_trx(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct mtd_partition *parts; ---- a/drivers/mtd/mtdsplit/mtdsplit_uimage.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_uimage.c -@@ -81,7 +81,7 @@ read_uimage_header(struct mtd_info *mtd, - * of a valid uImage header if found - */ - static int __mtdsplit_parse_uimage(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data, - ssize_t (*find_header)(u_char *buf, size_t len)) - { -@@ -232,7 +232,7 @@ static ssize_t uimage_verify_default(u_c - - static int - mtdsplit_uimage_parse_generic(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - return __mtdsplit_parse_uimage(master, pparts, data, -@@ -289,7 +289,7 @@ static ssize_t uimage_verify_wndr3700(u_ - - static int - mtdsplit_uimage_parse_netgear(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - return __mtdsplit_parse_uimage(master, pparts, data, -@@ -331,7 +331,7 @@ static ssize_t uimage_find_edimax(u_char - - static int - mtdsplit_uimage_parse_edimax(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - return __mtdsplit_parse_uimage(master, pparts, data, ---- a/drivers/mtd/mtdsplit/mtdsplit_wrgg.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_wrgg.c -@@ -51,8 +51,8 @@ struct wrg_header { - - - static int mtdsplit_parse_wrgg(struct mtd_info *master, -- const struct mtd_partition **pparts, -- struct mtd_part_parser_data *data) -+ struct mtd_partition **pparts, -+ struct mtd_part_parser_data *data) - { - struct wrgg03_header hdr; - size_t hdr_len, retlen, kernel_ent_size; ---- a/drivers/mtd/mtdsplit/mtdsplit_minor.c -+++ b/drivers/mtd/mtdsplit/mtdsplit_minor.c -@@ -49,7 +49,7 @@ struct minor_header { - }; - - static int mtdsplit_parse_minor(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct minor_header hdr; diff --git a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch deleted file mode 100644 index 6c9f30a97d..0000000000 --- a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch +++ /dev/null @@ -1,640 +0,0 @@ ---- a/drivers/net/phy/adm6996.c -+++ b/drivers/net/phy/adm6996.c -@@ -289,7 +289,7 @@ static u16 - adm6996_read_mii_reg(struct adm6996_priv *priv, enum admreg reg) - { - struct phy_device *phydev = priv->priv; -- struct mii_bus *bus = phydev->mdio.bus; -+ struct mii_bus *bus = phydev->bus; - - return bus->read(bus, PHYADDR(reg)); - } -@@ -298,7 +298,7 @@ static void - adm6996_write_mii_reg(struct adm6996_priv *priv, enum admreg reg, u16 val) - { - struct phy_device *phydev = priv->priv; -- struct mii_bus *bus = phydev->mdio.bus; -+ struct mii_bus *bus = phydev->bus; - - bus->write(bus, PHYADDR(reg), val); - } -@@ -1050,13 +1050,13 @@ static int adm6996_config_init(struct ph - pdev->supported = ADVERTISED_100baseT_Full; - pdev->advertising = ADVERTISED_100baseT_Full; - -- if (pdev->mdio.addr != 0) { -+ if (pdev->addr != 0) { - pr_info ("%s: PHY overlaps ADM6996, providing fixed PHY 0x%x.\n" -- , pdev->attached_dev->name, pdev->mdio.addr); -+ , pdev->attached_dev->name, pdev->addr); - return 0; - } - -- priv = devm_kzalloc(&pdev->mdio.dev, sizeof(struct adm6996_priv), GFP_KERNEL); -+ priv = devm_kzalloc(&pdev->dev, sizeof(struct adm6996_priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - -@@ -1076,7 +1076,7 @@ static int adm6996_config_init(struct ph - } - - /* -- * Warning: phydev->priv is NULL if phydev->mdio.addr != 0 -+ * Warning: phydev->priv is NULL if phydev->addr != 0 - */ - static int adm6996_read_status(struct phy_device *phydev) - { -@@ -1092,7 +1092,7 @@ static int adm6996_read_status(struct ph - } - - /* -- * Warning: phydev->priv is NULL if phydev->mdio.addr != 0 -+ * Warning: phydev->priv is NULL if phydev->addr != 0 - */ - static int adm6996_config_aneg(struct phy_device *phydev) - { -@@ -1101,11 +1101,11 @@ static int adm6996_config_aneg(struct ph - - static int adm6996_fixup(struct phy_device *dev) - { -- struct mii_bus *bus = dev->mdio.bus; -+ struct mii_bus *bus = dev->bus; - u16 reg; - - /* Our custom registers are at PHY addresses 0-10. Claim those. */ -- if (dev->mdio.addr > 10) -+ if (dev->addr > 10) - return 0; - - /* look for the switch on the bus */ -@@ -1152,6 +1152,7 @@ static struct phy_driver adm6996_phy_dri - .config_aneg = &adm6996_config_aneg, - .read_status = &adm6996_read_status, - .soft_reset = adm6996_soft_reset, -+ .driver = { .owner = THIS_MODULE,}, - }; - - static int adm6996_gpio_probe(struct platform_device *pdev) -@@ -1220,7 +1221,7 @@ static int __init adm6996_init(void) - int err; - - phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup); -- err = phy_driver_register(&adm6996_phy_driver, THIS_MODULE); -+ err = phy_driver_register(&adm6996_phy_driver); - if (err) - return err; - ---- a/drivers/net/phy/ar8216.c -+++ b/drivers/net/phy/ar8216.c -@@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device - if (ret & BMCR_ANENABLE) - return 0; - -- dev_info(&phydev->mdio.dev, "ANEG disabled, re-enabling ...\n"); -+ dev_info(&phydev->dev, "ANEG disabled, re-enabling ...\n"); - ret |= BMCR_ANENABLE | BMCR_ANRESTART; - return phy_write(phydev, MII_BMCR, ret); - } -@@ -2007,7 +2007,7 @@ ar8xxx_phy_config_init(struct phy_device - - priv->phy = phydev; - -- if (phydev->mdio.addr != 0) { -+ if (phydev->addr != 0) { - if (chip_is_ar8316(priv)) { - /* switch device has been initialized, reinit */ - priv->dev.ports = (AR8216_NUM_PORTS - 1); -@@ -2055,7 +2055,7 @@ ar8xxx_check_link_states(struct ar8xxx_p - /* flush ARL entries for this port if it went down*/ - if (!link_new) - priv->chip->atu_flush_port(priv, i); -- dev_info(&priv->phy->mdio.dev, "Port %d is %s\n", -+ dev_info(&priv->phy->dev, "Port %d is %s\n", - i, link_new ? "up" : "down"); - } - -@@ -2074,10 +2074,10 @@ ar8xxx_phy_read_status(struct phy_device - if (phydev->state == PHY_CHANGELINK) - ar8xxx_check_link_states(priv); - -- if (phydev->mdio.addr != 0) -+ if (phydev->addr != 0) - return genphy_read_status(phydev); - -- ar8216_read_port_link(priv, phydev->mdio.addr, &link); -+ ar8216_read_port_link(priv, phydev->addr, &link); - phydev->link = !!link.link; - if (!phydev->link) - return 0; -@@ -2107,7 +2107,7 @@ ar8xxx_phy_read_status(struct phy_device - static int - ar8xxx_phy_config_aneg(struct phy_device *phydev) - { -- if (phydev->mdio.addr == 0) -+ if (phydev->addr == 0) - return 0; - - return genphy_config_aneg(phydev); -@@ -2162,15 +2162,15 @@ ar8xxx_phy_probe(struct phy_device *phyd - int ret; - - /* skip PHYs at unused adresses */ -- if (phydev->mdio.addr != 0 && phydev->mdio.addr != 4) -+ if (phydev->addr != 0 && phydev->addr != 4) - return -ENODEV; - -- if (!ar8xxx_is_possible(phydev->mdio.bus)) -+ if (!ar8xxx_is_possible(phydev->bus)) - return -ENODEV; - - mutex_lock(&ar8xxx_dev_list_lock); - list_for_each_entry(priv, &ar8xxx_dev_list, list) -- if (priv->mii_bus == phydev->mdio.bus) -+ if (priv->mii_bus == phydev->bus) - goto found; - - priv = ar8xxx_create(); -@@ -2179,7 +2179,7 @@ ar8xxx_phy_probe(struct phy_device *phyd - goto unlock; - } - -- priv->mii_bus = phydev->mdio.bus; -+ priv->mii_bus = phydev->bus; - - ret = ar8xxx_probe_switch(priv); - if (ret) -@@ -2200,7 +2200,7 @@ ar8xxx_phy_probe(struct phy_device *phyd - found: - priv->use_count++; - -- if (phydev->mdio.addr == 0) { -+ if (phydev->addr == 0) { - if (ar8xxx_has_gige(priv)) { - phydev->supported = SUPPORTED_1000baseT_Full; - phydev->advertising = ADVERTISED_1000baseT_Full; -@@ -2288,21 +2288,33 @@ ar8xxx_phy_soft_reset(struct phy_device - return 0; - } - --static struct phy_driver ar8xxx_phy_driver[] = { -- { -- .phy_id = 0x004d0000, -- .name = "Atheros AR8216/AR8236/AR8316", -- .phy_id_mask = 0xffff0000, -- .features = PHY_BASIC_FEATURES, -- .probe = ar8xxx_phy_probe, -- .remove = ar8xxx_phy_remove, -- .detach = ar8xxx_phy_detach, -- .config_init = ar8xxx_phy_config_init, -- .config_aneg = ar8xxx_phy_config_aneg, -- .read_status = ar8xxx_phy_read_status, -- .soft_reset = ar8xxx_phy_soft_reset, -- } -+static struct phy_driver ar8xxx_phy_driver = { -+ .phy_id = 0x004d0000, -+ .name = "Atheros AR8216/AR8236/AR8316", -+ .phy_id_mask = 0xffff0000, -+ .features = PHY_BASIC_FEATURES, -+ .probe = ar8xxx_phy_probe, -+ .remove = ar8xxx_phy_remove, -+ .detach = ar8xxx_phy_detach, -+ .config_init = ar8xxx_phy_config_init, -+ .config_aneg = ar8xxx_phy_config_aneg, -+ .read_status = ar8xxx_phy_read_status, -+ .soft_reset = ar8xxx_phy_soft_reset, -+ .driver = { .owner = THIS_MODULE }, - }; - --module_phy_driver(ar8xxx_phy_driver); -+int __init -+ar8xxx_init(void) -+{ -+ return phy_driver_register(&ar8xxx_phy_driver); -+} -+ -+void __exit -+ar8xxx_exit(void) -+{ -+ phy_driver_unregister(&ar8xxx_phy_driver); -+} -+ -+module_init(ar8xxx_init); -+module_exit(ar8xxx_exit); - MODULE_LICENSE("GPL"); ---- a/drivers/net/phy/ar8327.c -+++ b/drivers/net/phy/ar8327.c -@@ -627,11 +627,11 @@ ar8327_hw_init(struct ar8xxx_priv *priv) - if (!priv->chip_data) - return -ENOMEM; - -- if (priv->phy->mdio.dev.of_node) -- ret = ar8327_hw_config_of(priv, priv->phy->mdio.dev.of_node); -+ if (priv->phy->dev.of_node) -+ ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node); - else - ret = ar8327_hw_config_pdata(priv, -- priv->phy->mdio.dev.platform_data); -+ priv->phy->dev.platform_data); - - if (ret) - return ret; ---- a/drivers/net/phy/ip17xx.c -+++ b/drivers/net/phy/ip17xx.c -@@ -1273,7 +1273,7 @@ static int ip17xx_probe(struct phy_devic - int err; - - /* We only attach to PHY 0, but use all available PHYs */ -- if (pdev->mdio.addr != 0) -+ if (pdev->addr != 0) - return -ENODEV; - - state = kzalloc(sizeof(*state), GFP_KERNEL); -@@ -1283,7 +1283,7 @@ static int ip17xx_probe(struct phy_devic - dev = &state->dev; - - pdev->priv = state; -- state->mii_bus = pdev->mdio.bus; -+ state->mii_bus = pdev->bus; - - err = get_model(state); - if (err < 0) -@@ -1295,7 +1295,7 @@ static int ip17xx_probe(struct phy_devic - dev->name = state->regs->NAME; - dev->ops = &ip17xx_ops; - -- pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->mdio.dev)); -+ pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->dev)); - return 0; - - error: -@@ -1353,25 +1353,58 @@ static int ip17xx_read_status(struct phy - return 0; - } - --static struct phy_driver ip17xx_driver[] = { -- { -- .name = "IC+ IP17xx", -- .phy_id = 0x02430c00, -- .phy_id_mask = 0x0ffffc00, -- .features = PHY_BASIC_FEATURES, -- .probe = ip17xx_probe, -- .remove = ip17xx_remove, -- .config_init = ip17xx_config_init, -- .config_aneg = ip17xx_config_aneg, -- .aneg_done = ip17xx_aneg_done, -- .update_link = ip17xx_update_link, -- .read_status = ip17xx_read_status, -- } -+static struct phy_driver ip17xx_driver = { -+ .name = "IC+ IP17xx", -+ .phy_id = 0x02430c00, -+ .phy_id_mask = 0x0ffffc00, -+ .features = PHY_BASIC_FEATURES, -+ .probe = ip17xx_probe, -+ .remove = ip17xx_remove, -+ .config_init = ip17xx_config_init, -+ .config_aneg = ip17xx_config_aneg, -+ .aneg_done = ip17xx_aneg_done, -+ .update_link = ip17xx_update_link, -+ .read_status = ip17xx_read_status, -+ .driver = { .owner = THIS_MODULE }, - }; - --module_phy_driver(ip17xx_driver); -+static struct phy_driver ip175a_driver = { -+ .name = "IC+ IP175A", -+ .phy_id = 0x02430c50, -+ .phy_id_mask = 0x0ffffff0, -+ .features = PHY_BASIC_FEATURES, -+ .probe = ip17xx_probe, -+ .remove = ip17xx_remove, -+ .config_init = ip17xx_config_init, -+ .config_aneg = ip17xx_config_aneg, -+ .aneg_done = ip17xx_aneg_done, -+ .update_link = ip17xx_update_link, -+ .read_status = ip17xx_read_status, -+ .driver = { .owner = THIS_MODULE }, -+}; -+ -+ -+int __init ip17xx_init(void) -+{ -+ int ret; -+ -+ ret = phy_driver_register(&ip175a_driver); -+ if (ret < 0) -+ return ret; -+ -+ return phy_driver_register(&ip17xx_driver); -+} -+ -+void __exit ip17xx_exit(void) -+{ -+ phy_driver_unregister(&ip17xx_driver); -+ phy_driver_unregister(&ip175a_driver); -+} - - MODULE_AUTHOR("Patrick Horn <patrick.horn@gmail.com>"); - MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>"); - MODULE_AUTHOR("Martin Mares <mj@ucw.cz>"); - MODULE_LICENSE("GPL"); -+ -+module_init(ip17xx_init); -+module_exit(ip17xx_exit); ---- a/drivers/net/phy/mvswitch.c -+++ b/drivers/net/phy/mvswitch.c -@@ -50,17 +50,13 @@ struct mvswitch_priv { - static inline u16 - r16(struct phy_device *phydev, int addr, int reg) - { -- struct mii_bus *bus = phydev->mdio.bus; -- -- return bus->read(bus, addr, reg); -+ return phydev->bus->read(phydev->bus, addr, reg); - } - - static inline void - w16(struct phy_device *phydev, int addr, int reg, u16 val) - { -- struct mii_bus *bus = phydev->mdio.bus; -- -- bus->write(bus, addr, reg, val); -+ phydev->bus->write(phydev->bus, addr, reg, val); - } - - -@@ -398,13 +394,12 @@ mvswitch_probe(struct phy_device *pdev) - static int - mvswitch_fixup(struct phy_device *dev) - { -- struct mii_bus *bus = dev->mdio.bus; - u16 reg; - -- if (dev->mdio.addr != 0x10) -+ if (dev->addr != 0x10) - return 0; - -- reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK; -+ reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK; - if (reg != MV_IDENT_VALUE) - return 0; - -@@ -425,13 +420,14 @@ static struct phy_driver mvswitch_driver - .config_aneg = &mvswitch_config_aneg, - .aneg_done = &mvswitch_aneg_done, - .read_status = &mvswitch_read_status, -+ .driver = { .owner = THIS_MODULE,}, - }; - - static int __init - mvswitch_init(void) - { - phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup); -- return phy_driver_register(&mvswitch_driver, THIS_MODULE); -+ return phy_driver_register(&mvswitch_driver); - } - - static void __exit ---- a/drivers/net/phy/psb6970.c -+++ b/drivers/net/phy/psb6970.c -@@ -70,16 +70,12 @@ struct psb6970_priv { - - static u16 psb6970_mii_read(struct phy_device *phydev, int reg) - { -- struct mii_bus *bus = phydev->mdio.bus; -- -- return bus->read(bus, PHYADDR(reg)); -+ return phydev->bus->read(phydev->bus, PHYADDR(reg)); - } - - static void psb6970_mii_write(struct phy_device *phydev, int reg, u16 val) - { -- struct mii_bus *bus = phydev->mdio.bus; -- -- bus->write(bus, PHYADDR(reg), val); -+ phydev->bus->write(phydev->bus, PHYADDR(reg), val); - } - - static int -@@ -316,11 +312,11 @@ static int psb6970_config_init(struct ph - - priv->phy = pdev; - -- if (pdev->mdio.addr == 0) -+ if (pdev->addr == 0) - printk(KERN_INFO "%s: psb6970 switch driver attached.\n", - pdev->attached_dev->name); - -- if (pdev->mdio.addr != 0) { -+ if (pdev->addr != 0) { - kfree(priv); - return 0; - } -@@ -388,14 +384,14 @@ static void psb6970_remove(struct phy_de - if (!priv) - return; - -- if (pdev->mdio.addr == 0) -+ if (pdev->addr == 0) - unregister_switch(&priv->dev); - kfree(priv); - } - - static int psb6970_fixup(struct phy_device *dev) - { -- struct mii_bus *bus = dev->mdio.bus; -+ struct mii_bus *bus = dev->bus; - u16 reg; - - /* look for the switch on the bus */ -@@ -419,12 +415,13 @@ static struct phy_driver psb6970_driver - .config_init = &psb6970_config_init, - .config_aneg = &psb6970_config_aneg, - .read_status = &psb6970_read_status, -+ .driver = {.owner = THIS_MODULE}, - }; - - int __init psb6970_init(void) - { - phy_register_fixup_for_id(PHY_ANY_ID, psb6970_fixup); -- return phy_driver_register(&psb6970_driver, THIS_MODULE); -+ return phy_driver_register(&psb6970_driver); - } - - module_init(psb6970_init); ---- a/drivers/net/phy/rtl8306.c -+++ b/drivers/net/phy/rtl8306.c -@@ -877,7 +877,7 @@ rtl8306_config_init(struct phy_device *p - int err; - - /* Only init the switch for the primary PHY */ -- if (pdev->mdio.addr != 0) -+ if (pdev->addr != 0) - return 0; - - val.value.i = 1; -@@ -887,7 +887,7 @@ rtl8306_config_init(struct phy_device *p - priv->dev.ops = &rtl8306_ops; - priv->do_cpu = 0; - priv->page = -1; -- priv->bus = pdev->mdio.bus; -+ priv->bus = pdev->bus; - - chipid = rtl_get(dev, RTL_REG_CHIPID); - chipver = rtl_get(dev, RTL_REG_CHIPVER); -@@ -933,13 +933,13 @@ rtl8306_fixup(struct phy_device *pdev) - u16 chipid; - - /* Attach to primary LAN port and WAN port */ -- if (pdev->mdio.addr != 0 && pdev->mdio.addr != 4) -+ if (pdev->addr != 0 && pdev->addr != 4) - return 0; - - memset(&priv, 0, sizeof(priv)); - priv.fixup = true; - priv.page = -1; -- priv.bus = pdev->mdio.bus; -+ priv.bus = pdev->bus; - chipid = rtl_get(&priv.dev, RTL_REG_CHIPID); - if (chipid == 0x5988) - pdev->phy_id = RTL8306_MAGIC; -@@ -957,14 +957,14 @@ rtl8306_probe(struct phy_device *pdev) - * share one rtl_priv instance between virtual phy - * devices on the same bus - */ -- if (priv->bus == pdev->mdio.bus) -+ if (priv->bus == pdev->bus) - goto found; - } - priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - -- priv->bus = pdev->mdio.bus; -+ priv->bus = pdev->bus; - - found: - pdev->priv = priv; -@@ -985,7 +985,7 @@ rtl8306_config_aneg(struct phy_device *p - struct rtl_priv *priv = pdev->priv; - - /* Only for WAN */ -- if (pdev->mdio.addr == 0) -+ if (pdev->addr == 0) - return 0; - - /* Restart autonegotiation */ -@@ -1001,7 +1001,7 @@ rtl8306_read_status(struct phy_device *p - struct rtl_priv *priv = pdev->priv; - struct switch_dev *dev = &priv->dev; - -- if (pdev->mdio.addr == 4) { -+ if (pdev->addr == 4) { - /* WAN */ - pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10; - pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF; -@@ -1044,6 +1044,7 @@ static struct phy_driver rtl8306_driver - .config_init = &rtl8306_config_init, - .config_aneg = &rtl8306_config_aneg, - .read_status = &rtl8306_read_status, -+ .driver = { .owner = THIS_MODULE,}, - }; - - -@@ -1051,7 +1052,7 @@ static int __init - rtl_init(void) - { - phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup); -- return phy_driver_register(&rtl8306_driver, THIS_MODULE); -+ return phy_driver_register(&rtl8306_driver); - } - - static void __exit ---- a/drivers/net/phy/b53/b53_mdio.c -+++ b/drivers/net/phy/b53/b53_mdio.c -@@ -277,11 +277,11 @@ static int b53_phy_probe(struct phy_devi - int ret; - - /* allow the generic phy driver to take over */ -- if (phydev->mdio.addr != B53_PSEUDO_PHY && phydev->mdio.addr != 0) -+ if (phydev->addr != B53_PSEUDO_PHY && phydev->addr != 0) - return -ENODEV; - - dev.current_page = 0xff; -- dev.priv = phydev->mdio.bus; -+ dev.priv = phydev->bus; - dev.ops = &b53_mdio_ops; - dev.pdata = NULL; - mutex_init(&dev.reg_mutex); -@@ -305,7 +305,7 @@ static int b53_phy_config_init(struct ph - struct b53_device *dev; - int ret; - -- dev = b53_switch_alloc(&phydev->mdio.dev, &b53_mdio_ops, phydev->mdio.bus); -+ dev = b53_switch_alloc(&phydev->dev, &b53_mdio_ops, phydev->bus); - if (!dev) - return -ENOMEM; - -@@ -372,6 +372,9 @@ static struct phy_driver b53_phy_driver_ - .config_aneg = b53_phy_config_aneg, - .config_init = b53_phy_config_init, - .read_status = b53_phy_read_status, -+ .driver = { -+ .owner = THIS_MODULE, -+ }, - }; - - /* BCM53125, BCM53128 */ -@@ -385,6 +388,9 @@ static struct phy_driver b53_phy_driver_ - .config_aneg = b53_phy_config_aneg, - .config_init = b53_phy_config_init, - .read_status = b53_phy_read_status, -+ .driver = { -+ .owner = THIS_MODULE, -+ }, - }; - - /* BCM5365 */ -@@ -398,21 +404,24 @@ static struct phy_driver b53_phy_driver_ - .config_aneg = b53_phy_config_aneg, - .config_init = b53_phy_config_init, - .read_status = b53_phy_read_status, -+ .driver = { -+ .owner = THIS_MODULE, -+ }, - }; - - int __init b53_phy_driver_register(void) - { - int ret; - -- ret = phy_driver_register(&b53_phy_driver_id1, THIS_MODULE); -+ ret = phy_driver_register(&b53_phy_driver_id1); - if (ret) - return ret; - -- ret = phy_driver_register(&b53_phy_driver_id2, THIS_MODULE); -+ ret = phy_driver_register(&b53_phy_driver_id2); - if (ret) - goto err1; - -- ret = phy_driver_register(&b53_phy_driver_id3, THIS_MODULE); -+ ret = phy_driver_register(&b53_phy_driver_id3); - if (!ret) - return 0; - ---- a/drivers/net/phy/b53/b53_phy_fixup.c -+++ b/drivers/net/phy/b53/b53_phy_fixup.c -@@ -28,10 +28,10 @@ - - static int b53_phy_fixup(struct phy_device *dev) - { -- struct mii_bus *bus = dev->mdio.bus; - u32 phy_id; -+ struct mii_bus *bus = dev->bus; - -- if (dev->mdio.addr != B53_PSEUDO_PHY) -+ if (dev->addr != B53_PSEUDO_PHY) - return 0; - - /* read the first port's id */ diff --git a/target/linux/generic/pending-4.4/003-myloader_backport.patch b/target/linux/generic/pending-4.4/003-myloader_backport.patch deleted file mode 100644 index 846b25dc04..0000000000 --- a/target/linux/generic/pending-4.4/003-myloader_backport.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/mtd/myloader.c -+++ b/drivers/mtd/myloader.c -@@ -33,7 +33,7 @@ struct part_data { - }; - - static int myloader_parse_partitions(struct mtd_info *master, -- const struct mtd_partition **pparts, -+ struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct part_data *buf; diff --git a/target/linux/generic/pending-4.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch b/target/linux/generic/pending-4.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch deleted file mode 100644 index f6c9d1edad..0000000000 --- a/target/linux/generic/pending-4.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Mon, 18 Jan 2016 12:27:49 +0100 -Subject: [PATCH] Kbuild: don't hardcode path to awk in scripts/ld-version.sh - -On some systems /usr/bin/awk does not exist, or is broken. Find it via -$PATH instead. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/scripts/ld-version.sh -+++ b/scripts/ld-version.sh -@@ -1,8 +1,10 @@ --#!/usr/bin/awk -f -+#!/bin/sh - # extract linker version number from stdin and turn into single number -+exec awk ' - { - gsub(".*\\)", ""); - split($1,a, "."); - print a[1]*10000000 + a[2]*100000 + a[3]*10000 + a[4]*100 + a[5]; - exit - } -+' diff --git a/target/linux/generic/pending-4.4/020-bcma-from-4.5.patch b/target/linux/generic/pending-4.4/020-bcma-from-4.5.patch deleted file mode 100644 index c5d7bc7e5e..0000000000 --- a/target/linux/generic/pending-4.4/020-bcma-from-4.5.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -672,11 +672,36 @@ static int bcma_device_uevent(struct dev - core->id.rev, core->id.class); - } - --static int __init bcma_modinit(void) -+static unsigned int bcma_bus_registered; -+ -+/* -+ * If built-in, bus has to be registered early, before any driver calls -+ * bcma_driver_register. -+ * Otherwise registering driver would trigger BUG in driver_register. -+ */ -+static int __init bcma_init_bus_register(void) - { - int err; - -+ if (bcma_bus_registered) -+ return 0; -+ - err = bus_register(&bcma_bus_type); -+ if (!err) -+ bcma_bus_registered = 1; -+ -+ return err; -+} -+#ifndef MODULE -+fs_initcall(bcma_init_bus_register); -+#endif -+ -+/* Main initialization has to be done with SPI/mtd/NAND/SPROM available */ -+static int __init bcma_modinit(void) -+{ -+ int err; -+ -+ err = bcma_init_bus_register(); - if (err) - return err; - -@@ -695,7 +720,7 @@ static int __init bcma_modinit(void) - - return err; - } --fs_initcall(bcma_modinit); -+module_init(bcma_modinit); - - static void __exit bcma_modexit(void) - { diff --git a/target/linux/generic/pending-4.4/021-bcma-from-4.6.patch b/target/linux/generic/pending-4.4/021-bcma-from-4.6.patch deleted file mode 100644 index dede2f1f23..0000000000 --- a/target/linux/generic/pending-4.4/021-bcma-from-4.6.patch +++ /dev/null @@ -1,761 +0,0 @@ ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -15,6 +15,8 @@ - #include <linux/platform_device.h> - #include <linux/bcma/bcma.h> - -+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc); -+ - static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, - u32 mask, u32 value) - { -@@ -113,8 +115,37 @@ int bcma_chipco_watchdog_register(struct - return 0; - } - -+static void bcma_core_chipcommon_flash_detect(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ case BCMA_CC_FLASHT_ATSER: -+ bcma_debug(bus, "Found serial flash\n"); -+ bcma_sflash_init(cc); -+ break; -+ case BCMA_CC_FLASHT_PARA: -+ bcma_debug(bus, "Found parallel flash\n"); -+ bcma_pflash_init(cc); -+ break; -+ default: -+ bcma_err(bus, "Flash type not supported\n"); -+ } -+ -+ if (cc->core->id.rev == 38 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { -+ if (cc->capabilities & BCMA_CC_CAP_NFLASH) { -+ bcma_debug(bus, "Found NAND flash\n"); -+ bcma_nflash_init(cc); -+ } -+ } -+} -+ - void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc) - { -+ struct bcma_bus *bus = cc->core->bus; -+ - if (cc->early_setup_done) - return; - -@@ -129,6 +160,12 @@ void bcma_core_chipcommon_early_init(str - if (cc->capabilities & BCMA_CC_CAP_PMU) - bcma_pmu_early_init(cc); - -+ if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC) -+ bcma_chipco_serial_init(cc); -+ -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) -+ bcma_core_chipcommon_flash_detect(cc); -+ - cc->early_setup_done = true; - } - -@@ -185,11 +222,12 @@ u32 bcma_chipco_watchdog_timer_set(struc - ticks = 2; - else if (ticks > maxt) - ticks = maxt; -- bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks); - } else { - struct bcma_bus *bus = cc->core->bus; - - if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4707 && -+ bus->chipinfo.id != BCMA_CHIP_ID_BCM47094 && - bus->chipinfo.id != BCMA_CHIP_ID_BCM53018) - bcma_core_set_clockmode(cc->core, - ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC); -@@ -314,9 +352,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcm - return res; - } - --#ifdef CONFIG_BCMA_DRIVER_MIPS --void bcma_chipco_serial_init(struct bcma_drv_cc *cc) -+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc) - { -+#if IS_BUILTIN(CONFIG_BCM47XX) - unsigned int irq; - u32 baud_base; - u32 i; -@@ -358,5 +396,5 @@ void bcma_chipco_serial_init(struct bcma - ports[i].baud_base = baud_base; - ports[i].reg_shift = 0; - } -+#endif /* CONFIG_BCM47XX */ - } --#endif /* CONFIG_BCMA_DRIVER_MIPS */ ---- a/drivers/bcma/driver_chipcommon_pmu.c -+++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -15,44 +15,44 @@ - - u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) - { -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); -- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); -- return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); -+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR); -+ return bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA); - } - EXPORT_SYMBOL_GPL(bcma_chipco_pll_read); - - void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) - { -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); -- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); -+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value); - } - EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); - - void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, - u32 set) - { -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); -- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); -- bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); -+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR); -+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_PLLCTL_DATA, mask, set); - } - EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); - - void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, - u32 offset, u32 mask, u32 set) - { -- bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); -- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -- bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_CHIPCTL_ADDR, offset); -+ bcma_pmu_read32(cc, BCMA_CC_PMU_CHIPCTL_ADDR); -+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_CHIPCTL_DATA, mask, set); - } - EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); - - void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, - u32 set) - { -- bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); -- bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); -- bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_REGCTL_ADDR, offset); -+ bcma_pmu_read32(cc, BCMA_CC_PMU_REGCTL_ADDR); -+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_REGCTL_DATA, mask, set); - } - EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); - -@@ -60,18 +60,18 @@ static u32 bcma_pmu_xtalfreq(struct bcma - { - u32 ilp_ctl, alp_hz; - -- if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) & -+ if (!(bcma_pmu_read32(cc, BCMA_CC_PMU_STAT) & - BCMA_CC_PMU_STAT_EXT_LPO_AVAIL)) - return 0; - -- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, -- BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ, -+ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); - usleep_range(1000, 2000); - -- ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ); -+ ilp_ctl = bcma_pmu_read32(cc, BCMA_CC_PMU_XTAL_FREQ); - ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK; - -- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); - - alp_hz = ilp_ctl * 32768 / 4; - return (alp_hz + 50000) / 100000 * 100; -@@ -127,8 +127,8 @@ static void bcma_pmu2_pll_init0(struct b - mask = (u32)~(BCMA_RES_4314_HT_AVAIL | - BCMA_RES_4314_MACPHY_CLK_AVAIL); - -- bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); -- bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); -+ bcma_pmu_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); -+ bcma_pmu_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); - bcma_wait_value(cc->core, BCMA_CLKCTLST, - BCMA_CLKCTLST_HAVEHT, 0, 20000); - break; -@@ -140,7 +140,7 @@ static void bcma_pmu2_pll_init0(struct b - - /* Flush */ - if (cc->pmu.rev >= 2) -- bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); -+ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); - - /* TODO: Do we need to update OTP? */ - } -@@ -195,9 +195,9 @@ static void bcma_pmu_resources_init(stru - - /* Set the resource masks. */ - if (min_msk) -- bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); - if (max_msk) -- bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); - - /* - * Add some delay; allow resources to come up and settle. -@@ -269,23 +269,33 @@ static void bcma_pmu_workarounds(struct - - void bcma_pmu_early_init(struct bcma_drv_cc *cc) - { -+ struct bcma_bus *bus = cc->core->bus; - u32 pmucap; - -- pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); -+ if (cc->core->id.rev >= 35 && -+ cc->capabilities_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) { -+ cc->pmu.core = bcma_find_core(bus, BCMA_CORE_PMU); -+ if (!cc->pmu.core) -+ bcma_warn(bus, "Couldn't find expected PMU core"); -+ } -+ if (!cc->pmu.core) -+ cc->pmu.core = cc->core; -+ -+ pmucap = bcma_pmu_read32(cc, BCMA_CC_PMU_CAP); - cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); - -- bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n", -- cc->pmu.rev, pmucap); -+ bcma_debug(bus, "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, -+ pmucap); - } - - void bcma_pmu_init(struct bcma_drv_cc *cc) - { - if (cc->pmu.rev == 1) -- bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, -- ~BCMA_CC_PMU_CTL_NOILPONW); -+ bcma_pmu_mask32(cc, BCMA_CC_PMU_CTL, -+ ~BCMA_CC_PMU_CTL_NOILPONW); - else -- bcma_cc_set32(cc, BCMA_CC_PMU_CTL, -- BCMA_CC_PMU_CTL_NOILPONW); -+ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL, -+ BCMA_CC_PMU_CTL_NOILPONW); - - bcma_pmu_pll_init(cc); - bcma_pmu_resources_init(cc); -@@ -472,8 +482,8 @@ u32 bcma_pmu_get_cpu_clock(struct bcma_d - static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset, - u32 value) - { -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value); - } - - void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid) -@@ -497,20 +507,20 @@ void bcma_pmu_spuravoid_pllupdate(struct - bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0; - - /* RMW only the P1 divider */ -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, - BCMA_CC_PMU_PLL_CTL0 + phypll_offset); -- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); -+ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA); - tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK)); - tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT); -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp); - - /* RMW only the int feedback divider */ -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, - BCMA_CC_PMU_PLL_CTL2 + phypll_offset); -- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); -+ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA); - tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK); - tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT; -- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp); - - tmp = BCMA_CC_PMU_CTL_PLL_UPD; - break; -@@ -646,7 +656,7 @@ void bcma_pmu_spuravoid_pllupdate(struct - break; - } - -- tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL); -- bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp); -+ tmp |= bcma_pmu_read32(cc, BCMA_CC_PMU_CTL); -+ bcma_pmu_write32(cc, BCMA_CC_PMU_CTL, tmp); - } - EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate); ---- a/drivers/bcma/driver_chipcommon_sflash.c -+++ b/drivers/bcma/driver_chipcommon_sflash.c -@@ -38,6 +38,7 @@ static const struct bcma_sflash_tbl_e bc - { "M25P32", 0x15, 0x10000, 64, }, - { "M25P64", 0x16, 0x10000, 128, }, - { "M25FL128", 0x17, 0x10000, 256, }, -+ { "MX25L25635F", 0x18, 0x10000, 512, }, - { NULL }, - }; - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -98,6 +98,9 @@ static const struct bcma_device_id_name - { BCMA_CORE_SHIM, "SHIM" }, - { BCMA_CORE_PCIE2, "PCIe Gen2" }, - { BCMA_CORE_ARM_CR4, "ARM CR4" }, -+ { BCMA_CORE_GCI, "GCI" }, -+ { BCMA_CORE_CMEM, "CNDS DDR2/3 memory controller" }, -+ { BCMA_CORE_ARM_CA7, "ARM CA7" }, - { BCMA_CORE_DEFAULT, "Default" }, - }; - -@@ -315,6 +318,8 @@ static int bcma_get_next_core(struct bcm - switch (core->id.id) { - case BCMA_CORE_4706_MAC_GBIT_COMMON: - case BCMA_CORE_NS_CHIPCOMMON_B: -+ case BCMA_CORE_PMU: -+ case BCMA_CORE_GCI: - /* Not used yet: case BCMA_CORE_OOB_ROUTER: */ - break; - default: ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str - case B43_BUS_BCMA: - bcma_cc = &dev->dev->bdev->bus->drv_cc; - -- bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0); -- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); -- bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4); -- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); -+ bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0); -+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); -+ bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4); -+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); - break; - #endif - #ifdef CONFIG_B43_SSB ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -151,6 +151,8 @@ struct bcma_host_ops { - #define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ - #define BCMA_CORE_USB30_DEV 0x83D - #define BCMA_CORE_ARM_CR4 0x83E -+#define BCMA_CORE_GCI 0x840 -+#define BCMA_CORE_CMEM 0x846 /* CNDS DDR2/3 memory controller */ - #define BCMA_CORE_ARM_CA7 0x847 - #define BCMA_CORE_SYS_MEM 0x849 - #define BCMA_CORE_DEFAULT 0xFFF -@@ -200,6 +202,7 @@ struct bcma_host_ops { - #define BCMA_PKG_ID_BCM4707 1 - #define BCMA_PKG_ID_BCM4708 2 - #define BCMA_PKG_ID_BCM4709 0 -+#define BCMA_CHIP_ID_BCM47094 53030 - #define BCMA_CHIP_ID_BCM53018 53018 - - /* Board types (on PCI usually equals to the subsystem dev id) */ ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -217,6 +217,11 @@ - #define BCMA_CC_CLKDIV_JTAG_SHIFT 8 - #define BCMA_CC_CLKDIV_UART 0x000000FF - #define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ -+#define BCMA_CC_CAP_EXT_SECI_PRESENT 0x00000001 -+#define BCMA_CC_CAP_EXT_GSIO_PRESENT 0x00000002 -+#define BCMA_CC_CAP_EXT_GCI_PRESENT 0x00000004 -+#define BCMA_CC_CAP_EXT_SECI_PUART_PRESENT 0x00000008 /* UART present */ -+#define BCMA_CC_CAP_EXT_AOB_PRESENT 0x00000040 - #define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ - #define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ - #define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ -@@ -351,12 +356,12 @@ - #define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ - #define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ - #define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ --#define BCMA_CC_CHIPCTL_ADDR 0x0650 --#define BCMA_CC_CHIPCTL_DATA 0x0654 --#define BCMA_CC_REGCTL_ADDR 0x0658 --#define BCMA_CC_REGCTL_DATA 0x065C --#define BCMA_CC_PLLCTL_ADDR 0x0660 --#define BCMA_CC_PLLCTL_DATA 0x0664 -+#define BCMA_CC_PMU_CHIPCTL_ADDR 0x0650 -+#define BCMA_CC_PMU_CHIPCTL_DATA 0x0654 -+#define BCMA_CC_PMU_REGCTL_ADDR 0x0658 -+#define BCMA_CC_PMU_REGCTL_DATA 0x065C -+#define BCMA_CC_PMU_PLLCTL_ADDR 0x0660 -+#define BCMA_CC_PMU_PLLCTL_DATA 0x0664 - #define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ - #define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ - #define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF -@@ -566,17 +571,16 @@ - * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) - */ - struct bcma_chipcommon_pmu { -+ struct bcma_device *core; /* Can be separated core or just ChipCommon one */ - u8 rev; /* PMU revision */ - u32 crystalfreq; /* The active crystal frequency (in kHz) */ - }; - --#ifdef CONFIG_BCMA_DRIVER_MIPS -+#ifdef CONFIG_BCMA_PFLASH - struct bcma_pflash { - bool present; -- u8 buswidth; -- u32 window; -- u32 window_size; - }; -+#endif - - #ifdef CONFIG_BCMA_SFLASH - struct bcma_sflash { -@@ -602,6 +606,7 @@ struct bcma_nflash { - }; - #endif - -+#ifdef CONFIG_BCMA_DRIVER_MIPS - struct bcma_serial_port { - void *regs; - unsigned long clockspeed; -@@ -621,8 +626,9 @@ struct bcma_drv_cc { - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct bcma_chipcommon_pmu pmu; --#ifdef CONFIG_BCMA_DRIVER_MIPS -+#ifdef CONFIG_BCMA_PFLASH - struct bcma_pflash pflash; -+#endif - #ifdef CONFIG_BCMA_SFLASH - struct bcma_sflash sflash; - #endif -@@ -630,6 +636,7 @@ struct bcma_drv_cc { - struct bcma_nflash nflash; - #endif - -+#ifdef CONFIG_BCMA_DRIVER_MIPS - int nr_serial_ports; - struct bcma_serial_port serial_ports[4]; - #endif /* CONFIG_BCMA_DRIVER_MIPS */ -@@ -662,6 +669,19 @@ struct bcma_drv_cc_b { - #define bcma_cc_maskset32(cc, offset, mask, set) \ - bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) - -+/* PMU registers access */ -+#define bcma_pmu_read32(cc, offset) \ -+ bcma_read32((cc)->pmu.core, offset) -+#define bcma_pmu_write32(cc, offset, val) \ -+ bcma_write32((cc)->pmu.core, offset, val) -+ -+#define bcma_pmu_mask32(cc, offset, mask) \ -+ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) & (mask)) -+#define bcma_pmu_set32(cc, offset, set) \ -+ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) | (set)) -+#define bcma_pmu_maskset32(cc, offset, mask, set) \ -+ bcma_pmu_write32(cc, offset, (bcma_pmu_read32(cc, offset) & (mask)) | (set)) -+ - extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); - - extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -45,10 +45,6 @@ int bcma_sprom_get(struct bcma_bus *bus) - void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); - void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); - void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); --#ifdef CONFIG_BCMA_DRIVER_MIPS --void bcma_chipco_serial_init(struct bcma_drv_cc *cc); --extern struct platform_device bcma_pflash_dev; --#endif /* CONFIG_BCMA_DRIVER_MIPS */ - - /* driver_chipcommon_b.c */ - int bcma_core_chipcommon_b_init(struct bcma_drv_cc_b *ccb); -@@ -60,6 +56,21 @@ void bcma_pmu_init(struct bcma_drv_cc *c - u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc); - u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc); - -+/************************************************** -+ * driver_chipcommon_sflash.c -+ **************************************************/ -+ -+#ifdef CONFIG_BCMA_PFLASH -+extern struct platform_device bcma_pflash_dev; -+int bcma_pflash_init(struct bcma_drv_cc *cc); -+#else -+static inline int bcma_pflash_init(struct bcma_drv_cc *cc) -+{ -+ bcma_err(cc->core->bus, "Parallel flash not supported\n"); -+ return 0; -+} -+#endif /* CONFIG_BCMA_PFLASH */ -+ - #ifdef CONFIG_BCMA_SFLASH - /* driver_chipcommon_sflash.c */ - int bcma_sflash_init(struct bcma_drv_cc *cc); ---- a/drivers/bcma/driver_gpio.c -+++ b/drivers/bcma/driver_gpio.c -@@ -197,6 +197,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c - case BCMA_CHIP_ID_BCM4707: - case BCMA_CHIP_ID_BCM5357: - case BCMA_CHIP_ID_BCM53572: -+ case BCMA_CHIP_ID_BCM47094: - chip->ngpio = 32; - break; - default: ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -14,8 +14,6 @@ - - #include <linux/bcma/bcma.h> - --#include <linux/mtd/physmap.h> --#include <linux/platform_device.h> - #include <linux/serial.h> - #include <linux/serial_core.h> - #include <linux/serial_reg.h> -@@ -32,26 +30,6 @@ enum bcma_boot_dev { - BCMA_BOOT_DEV_NAND, - }; - --static const char * const part_probes[] = { "bcm47xxpart", NULL }; -- --static struct physmap_flash_data bcma_pflash_data = { -- .part_probe_types = part_probes, --}; -- --static struct resource bcma_pflash_resource = { -- .name = "bcma_pflash", -- .flags = IORESOURCE_MEM, --}; -- --struct platform_device bcma_pflash_dev = { -- .name = "physmap-flash", -- .dev = { -- .platform_data = &bcma_pflash_data, -- }, -- .resource = &bcma_pflash_resource, -- .num_resources = 1, --}; -- - /* The 47162a0 hangs when reading MIPS DMP registers registers */ - static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) - { -@@ -272,48 +250,11 @@ static enum bcma_boot_dev bcma_boot_dev( - return BCMA_BOOT_DEV_SERIAL; - } - --static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) -+static void bcma_core_mips_nvram_init(struct bcma_drv_mips *mcore) - { - struct bcma_bus *bus = mcore->core->bus; -- struct bcma_drv_cc *cc = &bus->drv_cc; -- struct bcma_pflash *pflash = &cc->pflash; - enum bcma_boot_dev boot_dev; - -- switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -- case BCMA_CC_FLASHT_STSER: -- case BCMA_CC_FLASHT_ATSER: -- bcma_debug(bus, "Found serial flash\n"); -- bcma_sflash_init(cc); -- break; -- case BCMA_CC_FLASHT_PARA: -- bcma_debug(bus, "Found parallel flash\n"); -- pflash->present = true; -- pflash->window = BCMA_SOC_FLASH2; -- pflash->window_size = BCMA_SOC_FLASH2_SZ; -- -- if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & -- BCMA_CC_FLASH_CFG_DS) == 0) -- pflash->buswidth = 1; -- else -- pflash->buswidth = 2; -- -- bcma_pflash_data.width = pflash->buswidth; -- bcma_pflash_resource.start = pflash->window; -- bcma_pflash_resource.end = pflash->window + pflash->window_size; -- -- break; -- default: -- bcma_err(bus, "Flash type not supported\n"); -- } -- -- if (cc->core->id.rev == 38 || -- bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { -- if (cc->capabilities & BCMA_CC_CAP_NFLASH) { -- bcma_debug(bus, "Found NAND flash\n"); -- bcma_nflash_init(cc); -- } -- } -- - /* Determine flash type this SoC boots from */ - boot_dev = bcma_boot_dev(bus); - switch (boot_dev) { -@@ -337,13 +278,10 @@ static void bcma_core_mips_flash_detect( - - void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) - { -- struct bcma_bus *bus = mcore->core->bus; -- - if (mcore->early_setup_done) - return; - -- bcma_chipco_serial_init(&bus->drv_cc); -- bcma_core_mips_flash_detect(mcore); -+ bcma_core_mips_nvram_init(mcore); - - mcore->early_setup_done = true; - } ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -294,7 +294,8 @@ static const struct pci_device_id bcma_p - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) }, -- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, -+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) }, -+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_FOXCONN, 0xe092) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) }, ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -70,6 +70,11 @@ config BCMA_DRIVER_MIPS - - If unsure, say N - -+config BCMA_PFLASH -+ bool -+ depends on BCMA_DRIVER_MIPS -+ default y -+ - config BCMA_SFLASH - bool - depends on BCMA_DRIVER_MIPS ---- a/drivers/bcma/Makefile -+++ b/drivers/bcma/Makefile -@@ -1,6 +1,7 @@ - bcma-y += main.o scan.o core.o sprom.o - bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o - bcma-y += driver_chipcommon_b.o -+bcma-$(CONFIG_BCMA_PFLASH) += driver_chipcommon_pflash.o - bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o - bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o - bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o ---- /dev/null -+++ b/drivers/bcma/driver_chipcommon_pflash.c -@@ -0,0 +1,49 @@ -+/* -+ * Broadcom specific AMBA -+ * ChipCommon parallel flash -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+ -+#include <linux/bcma/bcma.h> -+#include <linux/mtd/physmap.h> -+#include <linux/platform_device.h> -+ -+static const char * const part_probes[] = { "bcm47xxpart", NULL }; -+ -+static struct physmap_flash_data bcma_pflash_data = { -+ .part_probe_types = part_probes, -+}; -+ -+static struct resource bcma_pflash_resource = { -+ .name = "bcma_pflash", -+ .flags = IORESOURCE_MEM, -+}; -+ -+struct platform_device bcma_pflash_dev = { -+ .name = "physmap-flash", -+ .dev = { -+ .platform_data = &bcma_pflash_data, -+ }, -+ .resource = &bcma_pflash_resource, -+ .num_resources = 1, -+}; -+ -+int bcma_pflash_init(struct bcma_drv_cc *cc) -+{ -+ struct bcma_pflash *pflash = &cc->pflash; -+ -+ pflash->present = true; -+ -+ if (!(bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & BCMA_CC_FLASH_CFG_DS)) -+ bcma_pflash_data.width = 1; -+ else -+ bcma_pflash_data.width = 2; -+ -+ bcma_pflash_resource.start = BCMA_SOC_FLASH2; -+ bcma_pflash_resource.end = BCMA_SOC_FLASH2 + BCMA_SOC_FLASH2_SZ; -+ -+ return 0; -+} ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -136,7 +136,6 @@ static bool bcma_is_core_needed_early(u1 - return false; - } - --#if defined(CONFIG_OF) && defined(CONFIG_OF_ADDRESS) - static struct device_node *bcma_of_find_child_device(struct platform_device *parent, - struct bcma_device *core) - { -@@ -184,7 +183,7 @@ static unsigned int bcma_of_get_irq(stru - struct of_phandle_args out_irq; - int ret; - -- if (!parent || !parent->dev.of_node) -+ if (!IS_ENABLED(CONFIG_OF_IRQ) || !parent || !parent->dev.of_node) - return 0; - - ret = bcma_of_irq_parse(parent, core, &out_irq, num); -@@ -202,23 +201,15 @@ static void bcma_of_fill_device(struct p - { - struct device_node *node; - -+ if (!IS_ENABLED(CONFIG_OF_IRQ)) -+ return; -+ - node = bcma_of_find_child_device(parent, core); - if (node) - core->dev.of_node = node; - - core->irq = bcma_of_get_irq(parent, core, 0); - } --#else --static void bcma_of_fill_device(struct platform_device *parent, -- struct bcma_device *core) --{ --} --static inline unsigned int bcma_of_get_irq(struct platform_device *parent, -- struct bcma_device *core, int num) --{ -- return 0; --} --#endif /* CONFIG_OF */ - - unsigned int bcma_core_irq(struct bcma_device *core, int num) - { -@@ -350,7 +341,7 @@ static int bcma_register_devices(struct - bcma_register_core(bus, core); - } - --#ifdef CONFIG_BCMA_DRIVER_MIPS -+#ifdef CONFIG_BCMA_PFLASH - if (bus->drv_cc.pflash.present) { - err = platform_device_register(&bcma_pflash_dev); - if (err) diff --git a/target/linux/generic/pending-4.4/022-bcma-from-4.8.patch b/target/linux/generic/pending-4.4/022-bcma-from-4.8.patch deleted file mode 100644 index 3ff4e94967..0000000000 --- a/target/linux/generic/pending-4.4/022-bcma-from-4.8.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -76,9 +76,16 @@ config BCMA_PFLASH - default y - - config BCMA_SFLASH -- bool -- depends on BCMA_DRIVER_MIPS -+ bool "ChipCommon-attached serial flash support" -+ depends on BCMA_HOST_SOC - default y -+ help -+ Some cheap devices have serial flash connected to the ChipCommon -+ instead of independent SPI controller. It requires using a separated -+ driver that implements ChipCommon specific interface communication. -+ -+ Enabling this symbol will let bcma recognize serial flash and register -+ it as platform device. - - config BCMA_NFLASH - bool ---- a/drivers/bcma/driver_chipcommon_b.c -+++ b/drivers/bcma/driver_chipcommon_b.c -@@ -33,11 +33,12 @@ static bool bcma_wait_reg(struct bcma_bu - void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value) - { - struct bcma_bus *bus = ccb->core->bus; -+ void __iomem *mii = ccb->mii; - -- writel(offset, ccb->mii + 0x00); -- bcma_wait_reg(bus, ccb->mii + 0x00, 0x0100, 0x0000, 100); -- writel(value, ccb->mii + 0x04); -- bcma_wait_reg(bus, ccb->mii + 0x00, 0x0100, 0x0000, 100); -+ writel(offset, mii + BCMA_CCB_MII_MNG_CTL); -+ bcma_wait_reg(bus, mii + BCMA_CCB_MII_MNG_CTL, 0x0100, 0x0000, 100); -+ writel(value, mii + BCMA_CCB_MII_MNG_CMD_DATA); -+ bcma_wait_reg(bus, mii + BCMA_CCB_MII_MNG_CTL, 0x0100, 0x0000, 100); - } - EXPORT_SYMBOL_GPL(bcma_chipco_b_mii_write); - ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -504,6 +504,9 @@ - #define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 - #define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 - -+#define BCMA_CCB_MII_MNG_CTL 0x0000 -+#define BCMA_CCB_MII_MNG_CMD_DATA 0x0004 -+ - /* BCM4331 ChipControl numbers. */ - #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ - #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ diff --git a/target/linux/generic/pending-4.4/023-bcma-from-4.9.patch b/target/linux/generic/pending-4.4/023-bcma-from-4.9.patch deleted file mode 100644 index 027054c162..0000000000 --- a/target/linux/generic/pending-4.4/023-bcma-from-4.9.patch +++ /dev/null @@ -1,108 +0,0 @@ ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -36,12 +36,31 @@ u32 bcma_chipco_get_alp_clock(struct bcm - } - EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock); - -+static bool bcma_core_cc_has_pmu_watchdog(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ -+ if (cc->capabilities & BCMA_CC_CAP_PMU) { -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53573) { -+ WARN(bus->chipinfo.rev <= 1, "No watchdog available\n"); -+ /* 53573B0 and 53573B1 have bugged PMU watchdog. It can -+ * be enabled but timer can't be bumped. Use CC one -+ * instead. -+ */ -+ return false; -+ } -+ return true; -+ } else { -+ return false; -+ } -+} -+ - static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; - u32 nb; - -- if (cc->capabilities & BCMA_CC_CAP_PMU) { -+ if (bcma_core_cc_has_pmu_watchdog(cc)) { - if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) - nb = 32; - else if (cc->core->id.rev < 26) -@@ -95,9 +114,16 @@ static int bcma_chipco_watchdog_ticks_pe - - int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc) - { -+ struct bcma_bus *bus = cc->core->bus; - struct bcm47xx_wdt wdt = {}; - struct platform_device *pdev; - -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53573 && -+ bus->chipinfo.rev <= 1) { -+ pr_debug("No watchdog on 53573A0 / 53573A1\n"); -+ return 0; -+ } -+ - wdt.driver_data = cc; - wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt; - wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt; -@@ -105,7 +131,7 @@ int bcma_chipco_watchdog_register(struct - bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms; - - pdev = platform_device_register_data(NULL, "bcm47xx-wdt", -- cc->core->bus->num, &wdt, -+ bus->num, &wdt, - sizeof(wdt)); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); -@@ -217,7 +243,7 @@ u32 bcma_chipco_watchdog_timer_set(struc - u32 maxt; - - maxt = bcma_chipco_watchdog_get_max_timer(cc); -- if (cc->capabilities & BCMA_CC_CAP_PMU) { -+ if (bcma_core_cc_has_pmu_watchdog(cc)) { - if (ticks == 1) - ticks = 2; - else if (ticks > maxt) ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -204,6 +204,9 @@ struct bcma_host_ops { - #define BCMA_PKG_ID_BCM4709 0 - #define BCMA_CHIP_ID_BCM47094 53030 - #define BCMA_CHIP_ID_BCM53018 53018 -+#define BCMA_CHIP_ID_BCM53573 53573 -+#define BCMA_PKG_ID_BCM53573 0 -+#define BCMA_PKG_ID_BCM47189 1 - - /* Board types (on PCI usually equals to the subsystem dev id) */ - /* BCM4313 */ ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -209,6 +209,8 @@ static void bcma_of_fill_device(struct p - core->dev.of_node = node; - - core->irq = bcma_of_get_irq(parent, core, 0); -+ -+ of_dma_configure(&core->dev, node); - } - - unsigned int bcma_core_irq(struct bcma_device *core, int num) -@@ -248,12 +250,12 @@ void bcma_prepare_core(struct bcma_bus * - core->irq = bus->host_pci->irq; - break; - case BCMA_HOSTTYPE_SOC: -- core->dev.dma_mask = &core->dev.coherent_dma_mask; -- if (bus->host_pdev) { -+ if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) { - core->dma_dev = &bus->host_pdev->dev; - core->dev.parent = &bus->host_pdev->dev; - bcma_of_fill_device(bus->host_pdev, core); - } else { -+ core->dev.dma_mask = &core->dev.coherent_dma_mask; - core->dma_dev = &core->dev; - } - break; diff --git a/target/linux/generic/pending-4.4/025-bcma-from-4.11.patch b/target/linux/generic/pending-4.4/025-bcma-from-4.11.patch deleted file mode 100644 index a3b0321986..0000000000 --- a/target/linux/generic/pending-4.4/025-bcma-from-4.11.patch +++ /dev/null @@ -1,85 +0,0 @@ ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -136,17 +136,17 @@ static bool bcma_is_core_needed_early(u1 - return false; - } - --static struct device_node *bcma_of_find_child_device(struct platform_device *parent, -+static struct device_node *bcma_of_find_child_device(struct device *parent, - struct bcma_device *core) - { - struct device_node *node; - u64 size; - const __be32 *reg; - -- if (!parent || !parent->dev.of_node) -+ if (!parent->of_node) - return NULL; - -- for_each_child_of_node(parent->dev.of_node, node) { -+ for_each_child_of_node(parent->of_node, node) { - reg = of_get_address(node, 0, &size, NULL); - if (!reg) - continue; -@@ -156,7 +156,7 @@ static struct device_node *bcma_of_find_ - return NULL; - } - --static int bcma_of_irq_parse(struct platform_device *parent, -+static int bcma_of_irq_parse(struct device *parent, - struct bcma_device *core, - struct of_phandle_args *out_irq, int num) - { -@@ -169,7 +169,7 @@ static int bcma_of_irq_parse(struct plat - return rc; - } - -- out_irq->np = parent->dev.of_node; -+ out_irq->np = parent->of_node; - out_irq->args_count = 1; - out_irq->args[0] = num; - -@@ -177,13 +177,13 @@ static int bcma_of_irq_parse(struct plat - return of_irq_parse_raw(laddr, out_irq); - } - --static unsigned int bcma_of_get_irq(struct platform_device *parent, -+static unsigned int bcma_of_get_irq(struct device *parent, - struct bcma_device *core, int num) - { - struct of_phandle_args out_irq; - int ret; - -- if (!IS_ENABLED(CONFIG_OF_IRQ) || !parent || !parent->dev.of_node) -+ if (!IS_ENABLED(CONFIG_OF_IRQ) || !parent->of_node) - return 0; - - ret = bcma_of_irq_parse(parent, core, &out_irq, num); -@@ -196,7 +196,7 @@ static unsigned int bcma_of_get_irq(stru - return irq_create_of_mapping(&out_irq); - } - --static void bcma_of_fill_device(struct platform_device *parent, -+static void bcma_of_fill_device(struct device *parent, - struct bcma_device *core) - { - struct device_node *node; -@@ -227,7 +227,7 @@ unsigned int bcma_core_irq(struct bcma_d - return mips_irq <= 4 ? mips_irq + 2 : 0; - } - if (bus->host_pdev) -- return bcma_of_get_irq(bus->host_pdev, core, num); -+ return bcma_of_get_irq(&bus->host_pdev->dev, core, num); - return 0; - case BCMA_HOSTTYPE_SDIO: - return 0; -@@ -253,7 +253,8 @@ void bcma_prepare_core(struct bcma_bus * - if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) { - core->dma_dev = &bus->host_pdev->dev; - core->dev.parent = &bus->host_pdev->dev; -- bcma_of_fill_device(bus->host_pdev, core); -+ if (core->dev.parent) -+ bcma_of_fill_device(core->dev.parent, core); - } else { - core->dev.dma_mask = &core->dev.coherent_dma_mask; - core->dma_dev = &core->dev; diff --git a/target/linux/generic/pending-4.4/026-bcma-from-4.12.patch b/target/linux/generic/pending-4.4/026-bcma-from-4.12.patch deleted file mode 100644 index bd7d643cbb..0000000000 --- a/target/linux/generic/pending-4.4/026-bcma-from-4.12.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/drivers/bcma/driver_gpio.c -+++ b/drivers/bcma/driver_gpio.c -@@ -190,8 +190,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c - chip->owner = THIS_MODULE; - chip->dev = bcma_bus_get_host_dev(bus); - #if IS_BUILTIN(CONFIG_OF) -- if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) -- chip->of_node = cc->core->dev.of_node; -+ chip->of_node = cc->core->dev.of_node; - #endif - switch (bus->chipinfo.id) { - case BCMA_CHIP_ID_BCM4707: ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -201,9 +201,6 @@ static void bcma_of_fill_device(struct d - { - struct device_node *node; - -- if (!IS_ENABLED(CONFIG_OF_IRQ)) -- return; -- - node = bcma_of_find_child_device(parent, core); - if (node) - core->dev.of_node = node; -@@ -242,19 +239,18 @@ void bcma_prepare_core(struct bcma_bus * - core->dev.release = bcma_release_core_dev; - core->dev.bus = &bcma_bus_type; - dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index); -+ core->dev.parent = bcma_bus_get_host_dev(bus); -+ if (core->dev.parent) -+ bcma_of_fill_device(core->dev.parent, core); - - switch (bus->hosttype) { - case BCMA_HOSTTYPE_PCI: -- core->dev.parent = &bus->host_pci->dev; - core->dma_dev = &bus->host_pci->dev; - core->irq = bus->host_pci->irq; - break; - case BCMA_HOSTTYPE_SOC: - if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) { - core->dma_dev = &bus->host_pdev->dev; -- core->dev.parent = &bus->host_pdev->dev; -- if (core->dev.parent) -- bcma_of_fill_device(core->dev.parent, core); - } else { - core->dev.dma_mask = &core->dev.coherent_dma_mask; - core->dma_dev = &core->dev; diff --git a/target/linux/generic/pending-4.4/030-1-smsc95xx-Use-skb_cow_head-to-deal-with-cloned-skbs.patch b/target/linux/generic/pending-4.4/030-1-smsc95xx-Use-skb_cow_head-to-deal-with-cloned-skbs.patch deleted file mode 100644 index 36fb936e32..0000000000 --- a/target/linux/generic/pending-4.4/030-1-smsc95xx-Use-skb_cow_head-to-deal-with-cloned-skbs.patch +++ /dev/null @@ -1,40 +0,0 @@ -From e9156cd26a495a18706e796f02a81fee41ec14f4 Mon Sep 17 00:00:00 2001 -From: James Hughes <james.hughes@raspberrypi.org> -Date: Wed, 19 Apr 2017 11:13:40 +0100 -Subject: [PATCH] smsc95xx: Use skb_cow_head to deal with cloned skbs - -The driver was failing to check that the SKB wasn't cloned -before adding checksum data. -Replace existing handling to extend/copy the header buffer -with skb_cow_head. - -Signed-off-by: James Hughes <james.hughes@raspberrypi.org> -Acked-by: Eric Dumazet <edumazet@google.com> -Acked-by: Woojung Huh <Woojung.Huh@microchip.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/smsc95xx.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/net/usb/smsc95xx.c -+++ b/drivers/net/usb/smsc95xx.c -@@ -1835,13 +1835,13 @@ static struct sk_buff *smsc95xx_tx_fixup - /* We do not advertise SG, so skbs should be already linearized */ - BUG_ON(skb_shinfo(skb)->nr_frags); - -- if (skb_headroom(skb) < overhead) { -- struct sk_buff *skb2 = skb_copy_expand(skb, -- overhead, 0, flags); -+ /* Make writable and expand header space by overhead if required */ -+ if (skb_cow_head(skb, overhead)) { -+ /* Must deallocate here as returning NULL to indicate error -+ * means the skb won't be deallocated in the caller. -+ */ - dev_kfree_skb_any(skb); -- skb = skb2; -- if (!skb) -- return NULL; -+ return NULL; - } - - if (csum) { diff --git a/target/linux/generic/pending-4.4/030-6-ch9200-use-skb_cow_head-to-deal-with-cloned-skbs.patch b/target/linux/generic/pending-4.4/030-6-ch9200-use-skb_cow_head-to-deal-with-cloned-skbs.patch deleted file mode 100644 index 2e8bba57e0..0000000000 --- a/target/linux/generic/pending-4.4/030-6-ch9200-use-skb_cow_head-to-deal-with-cloned-skbs.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 6bc6895bdd6744e0136eaa4a11fbdb20a7db4e40 Mon Sep 17 00:00:00 2001 -From: Eric Dumazet <edumazet@google.com> -Date: Wed, 19 Apr 2017 09:59:25 -0700 -Subject: [PATCH] ch9200: use skb_cow_head() to deal with cloned skbs - -We need to ensure there is enough headroom to push extra header, -but we also need to check if we are allowed to change headers. - -skb_cow_head() is the proper helper to deal with this. - -Fixes: 4a476bd6d1d9 ("usbnet: New driver for QinHeng CH9200 devices") -Signed-off-by: Eric Dumazet <edumazet@google.com> -Cc: James Hughes <james.hughes@raspberrypi.org> -Cc: Matthew Garrett <mjg59@srcf.ucam.org> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/ch9200.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - ---- a/drivers/net/usb/ch9200.c -+++ b/drivers/net/usb/ch9200.c -@@ -255,14 +255,9 @@ static struct sk_buff *ch9200_tx_fixup(s - tx_overhead = 0x40; - - len = skb->len; -- if (skb_headroom(skb) < tx_overhead) { -- struct sk_buff *skb2; -- -- skb2 = skb_copy_expand(skb, tx_overhead, 0, flags); -+ if (skb_cow_head(skb, tx_overhead)) { - dev_kfree_skb_any(skb); -- skb = skb2; -- if (!skb) -- return NULL; -+ return NULL; - } - - __skb_push(skb, tx_overhead); diff --git a/target/linux/generic/pending-4.4/030-7-kaweth-use-skb_cow_head-to-deal-with-cloned-skbs.patch b/target/linux/generic/pending-4.4/030-7-kaweth-use-skb_cow_head-to-deal-with-cloned-skbs.patch deleted file mode 100644 index 541c694bec..0000000000 --- a/target/linux/generic/pending-4.4/030-7-kaweth-use-skb_cow_head-to-deal-with-cloned-skbs.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 39fba7835aacda65284a86e611774cbba71dac20 Mon Sep 17 00:00:00 2001 -From: Eric Dumazet <edumazet@google.com> -Date: Wed, 19 Apr 2017 09:59:26 -0700 -Subject: [PATCH] kaweth: use skb_cow_head() to deal with cloned skbs - -We can use skb_cow_head() to properly deal with clones, -especially the ones coming from TCP stack that allow their head being -modified. This avoids a copy. - -Signed-off-by: Eric Dumazet <edumazet@google.com> -Cc: James Hughes <james.hughes@raspberrypi.org> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/kaweth.c | 18 ++++++------------ - 1 file changed, 6 insertions(+), 12 deletions(-) - ---- a/drivers/net/usb/kaweth.c -+++ b/drivers/net/usb/kaweth.c -@@ -812,18 +812,12 @@ static netdev_tx_t kaweth_start_xmit(str - } - - /* We now decide whether we can put our special header into the sk_buff */ -- if (skb_cloned(skb) || skb_headroom(skb) < 2) { -- /* no such luck - we make our own */ -- struct sk_buff *copied_skb; -- copied_skb = skb_copy_expand(skb, 2, 0, GFP_ATOMIC); -- dev_kfree_skb_irq(skb); -- skb = copied_skb; -- if (!copied_skb) { -- kaweth->stats.tx_errors++; -- netif_start_queue(net); -- spin_unlock_irq(&kaweth->device_lock); -- return NETDEV_TX_OK; -- } -+ if (skb_cow_head(skb, 2)) { -+ kaweth->stats.tx_errors++; -+ netif_start_queue(net); -+ spin_unlock_irq(&kaweth->device_lock); -+ dev_kfree_skb_any(skb); -+ return NETDEV_TX_OK; - } - - private_header = (__le16 *)__skb_push(skb, 2); diff --git a/target/linux/generic/pending-4.4/032-fq_codel-add-batch-ability-to-fq_codel_drop.patch b/target/linux/generic/pending-4.4/032-fq_codel-add-batch-ability-to-fq_codel_drop.patch deleted file mode 100644 index d1390348cb..0000000000 --- a/target/linux/generic/pending-4.4/032-fq_codel-add-batch-ability-to-fq_codel_drop.patch +++ /dev/null @@ -1,189 +0,0 @@ -From: Eric Dumazet <edumazet@google.com> -Date: Sun, 1 May 2016 16:47:26 -0700 -Subject: [PATCH] fq_codel: add batch ability to fq_codel_drop() - -In presence of inelastic flows and stress, we can call -fq_codel_drop() for every packet entering fq_codel qdisc. - -fq_codel_drop() is quite expensive, as it does a linear scan -of 4 KB of memory to find a fat flow. -Once found, it drops the oldest packet of this flow. - -Instead of dropping a single packet, try to drop 50% of the backlog -of this fat flow, with a configurable limit of 64 packets per round. - -TCA_FQ_CODEL_DROP_BATCH_SIZE is the new attribute to make this -limit configurable. - -With this strategy the 4 KB search is amortized to a single cache line -per drop [1], so fq_codel_drop() no longer appears at the top of kernel -profile in presence of few inelastic flows. - -[1] Assuming a 64byte cache line, and 1024 buckets - -Signed-off-by: Eric Dumazet <edumazet@google.com> -Reported-by: Dave Taht <dave.taht@gmail.com> -Cc: Jonathan Morton <chromatix99@gmail.com> -Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> -Acked-by: Dave Taht -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - ---- a/include/uapi/linux/pkt_sched.h -+++ b/include/uapi/linux/pkt_sched.h -@@ -711,6 +711,7 @@ enum { - TCA_FQ_CODEL_FLOWS, - TCA_FQ_CODEL_QUANTUM, - TCA_FQ_CODEL_CE_THRESHOLD, -+ TCA_FQ_CODEL_DROP_BATCH_SIZE, - __TCA_FQ_CODEL_MAX - }; - ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -57,6 +57,7 @@ struct fq_codel_sched_data { - u32 flows_cnt; /* number of flows */ - u32 perturbation; /* hash perturbation */ - u32 quantum; /* psched_mtu(qdisc_dev(sch)); */ -+ u32 drop_batch_size; - struct codel_params cparams; - struct codel_stats cstats; - u32 drop_overlimit; -@@ -133,17 +134,20 @@ static inline void flow_queue_add(struct - skb->next = NULL; - } - --static unsigned int fq_codel_drop(struct Qdisc *sch) -+static unsigned int fq_codel_drop(struct Qdisc *sch, unsigned int max_packets) - { - struct fq_codel_sched_data *q = qdisc_priv(sch); - struct sk_buff *skb; - unsigned int maxbacklog = 0, idx = 0, i, len; - struct fq_codel_flow *flow; -+ unsigned int threshold; - -- /* Queue is full! Find the fat flow and drop packet from it. -+ /* Queue is full! Find the fat flow and drop packet(s) from it. - * This might sound expensive, but with 1024 flows, we scan - * 4KB of memory, and we dont need to handle a complex tree - * in fast path (packet queue/enqueue) with many cache misses. -+ * In stress mode, we'll try to drop 64 packets from the flow, -+ * amortizing this linear lookup to one cache line per drop. - */ - for (i = 0; i < q->flows_cnt; i++) { - if (q->backlogs[i] > maxbacklog) { -@@ -151,15 +155,24 @@ static unsigned int fq_codel_drop(struct - idx = i; - } - } -+ -+ /* Our goal is to drop half of this fat flow backlog */ -+ threshold = maxbacklog >> 1; -+ - flow = &q->flows[idx]; -- skb = dequeue_head(flow); -- len = qdisc_pkt_len(skb); -+ len = 0; -+ i = 0; -+ do { -+ skb = dequeue_head(flow); -+ len += qdisc_pkt_len(skb); -+ kfree_skb(skb); -+ } while (++i < max_packets && len < threshold); -+ -+ flow->dropped += i; - q->backlogs[idx] -= len; -- sch->q.qlen--; -- qdisc_qstats_drop(sch); -- qdisc_qstats_backlog_dec(sch, skb); -- kfree_skb(skb); -- flow->dropped++; -+ sch->qstats.drops += i; -+ sch->qstats.backlog -= len; -+ sch->q.qlen -= i; - return idx; - } - -@@ -168,14 +181,14 @@ static unsigned int fq_codel_qdisc_drop( - unsigned int prev_backlog; - - prev_backlog = sch->qstats.backlog; -- fq_codel_drop(sch); -+ fq_codel_drop(sch, 1U); - return prev_backlog - sch->qstats.backlog; - } - - static int fq_codel_enqueue(struct sk_buff *skb, struct Qdisc *sch) - { - struct fq_codel_sched_data *q = qdisc_priv(sch); -- unsigned int idx, prev_backlog; -+ unsigned int idx, prev_backlog, prev_qlen; - struct fq_codel_flow *flow; - int uninitialized_var(ret); - -@@ -204,16 +217,22 @@ static int fq_codel_enqueue(struct sk_bu - return NET_XMIT_SUCCESS; - - prev_backlog = sch->qstats.backlog; -- q->drop_overlimit++; -- /* Return Congestion Notification only if we dropped a packet -- * from this flow. -+ prev_qlen = sch->q.qlen; -+ -+ /* fq_codel_drop() is quite expensive, as it performs a linear search -+ * in q->backlogs[] to find a fat flow. -+ * So instead of dropping a single packet, drop half of its backlog -+ * with a 64 packets limit to not add a too big cpu spike here. - */ -- if (fq_codel_drop(sch) == idx) -- return NET_XMIT_CN; -+ ret = fq_codel_drop(sch, q->drop_batch_size); -+ -+ q->drop_overlimit += prev_qlen - sch->q.qlen; - -- /* As we dropped a packet, better let upper stack know this */ -- qdisc_tree_reduce_backlog(sch, 1, prev_backlog - sch->qstats.backlog); -- return NET_XMIT_SUCCESS; -+ /* As we dropped packet(s), better let upper stack know this */ -+ qdisc_tree_reduce_backlog(sch, prev_qlen - sch->q.qlen, -+ prev_backlog - sch->qstats.backlog); -+ -+ return ret == idx ? NET_XMIT_CN : NET_XMIT_SUCCESS; - } - - /* This is the specific function called from codel_dequeue() -@@ -323,6 +342,7 @@ static const struct nla_policy fq_codel_ - [TCA_FQ_CODEL_FLOWS] = { .type = NLA_U32 }, - [TCA_FQ_CODEL_QUANTUM] = { .type = NLA_U32 }, - [TCA_FQ_CODEL_CE_THRESHOLD] = { .type = NLA_U32 }, -+ [TCA_FQ_CODEL_DROP_BATCH_SIZE] = { .type = NLA_U32 }, - }; - - static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt) -@@ -374,6 +394,9 @@ static int fq_codel_change(struct Qdisc - if (tb[TCA_FQ_CODEL_QUANTUM]) - q->quantum = max(256U, nla_get_u32(tb[TCA_FQ_CODEL_QUANTUM])); - -+ if (tb[TCA_FQ_CODEL_DROP_BATCH_SIZE]) -+ q->drop_batch_size = min(1U, nla_get_u32(tb[TCA_FQ_CODEL_DROP_BATCH_SIZE])); -+ - while (sch->q.qlen > sch->limit) { - struct sk_buff *skb = fq_codel_dequeue(sch); - -@@ -419,6 +442,7 @@ static int fq_codel_init(struct Qdisc *s - - sch->limit = 10*1024; - q->flows_cnt = 1024; -+ q->drop_batch_size = 64; - q->quantum = psched_mtu(qdisc_dev(sch)); - q->perturbation = prandom_u32(); - INIT_LIST_HEAD(&q->new_flows); -@@ -476,6 +500,8 @@ static int fq_codel_dump(struct Qdisc *s - q->cparams.ecn) || - nla_put_u32(skb, TCA_FQ_CODEL_QUANTUM, - q->quantum) || -+ nla_put_u32(skb, TCA_FQ_CODEL_DROP_BATCH_SIZE, -+ q->drop_batch_size) || - nla_put_u32(skb, TCA_FQ_CODEL_FLOWS, - q->flows_cnt)) - goto nla_put_failure; diff --git a/target/linux/generic/pending-4.4/033-fq_codel-add-memory-limitation-per-queue.patch b/target/linux/generic/pending-4.4/033-fq_codel-add-memory-limitation-per-queue.patch deleted file mode 100644 index 455add9eae..0000000000 --- a/target/linux/generic/pending-4.4/033-fq_codel-add-memory-limitation-per-queue.patch +++ /dev/null @@ -1,182 +0,0 @@ -From: Eric Dumazet <edumazet@google.com> -Date: Fri, 6 May 2016 08:55:12 -0700 -Subject: [PATCH] fq_codel: add memory limitation per queue -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -On small embedded routers, one wants to control maximal amount of -memory used by fq_codel, instead of controlling number of packets or -bytes, since GRO/TSO make these not practical. - -Assuming skb->truesize is accurate, we have to keep track of -skb->truesize sum for skbs in queue. - -This patch adds a new TCA_FQ_CODEL_MEMORY_LIMIT attribute. - -I chose a default value of 32 MBytes, which looks reasonable even -for heavy duty usages. (Prior fq_codel users should not be hurt -when they upgrade their kernels) - -Two fields are added to tc_fq_codel_qd_stats to report : - - Current memory usage - - Number of drops caused by memory limits - -# tc qd replace dev eth1 root est 1sec 4sec fq_codel memory_limit 4M -.. -# tc -s -d qd sh dev eth1 -qdisc fq_codel 8008: root refcnt 257 limit 10240p flows 1024 - quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn - Sent 2083566791363 bytes 1376214889 pkt (dropped 4994406, overlimits 0 -requeues 21705223) - rate 9841Mbit 812549pps backlog 3906120b 376p requeues 21705223 - maxpacket 68130 drop_overlimit 4994406 new_flow_count 28855414 - ecn_mark 0 memory_used 4190048 drop_overmemory 4994406 - new_flows_len 1 old_flows_len 177 - -Signed-off-by: Eric Dumazet <edumazet@google.com> -Cc: Jesper Dangaard Brouer <brouer@redhat.com> -Cc: Dave Täht <dave.taht@gmail.com> -Cc: Sebastian Möller <moeller0@gmx.de> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - ---- a/include/uapi/linux/pkt_sched.h -+++ b/include/uapi/linux/pkt_sched.h -@@ -712,6 +712,7 @@ enum { - TCA_FQ_CODEL_QUANTUM, - TCA_FQ_CODEL_CE_THRESHOLD, - TCA_FQ_CODEL_DROP_BATCH_SIZE, -+ TCA_FQ_CODEL_MEMORY_LIMIT, - __TCA_FQ_CODEL_MAX - }; - -@@ -736,6 +737,8 @@ struct tc_fq_codel_qd_stats { - __u32 new_flows_len; /* count of flows in new list */ - __u32 old_flows_len; /* count of flows in old list */ - __u32 ce_mark; /* packets above ce_threshold */ -+ __u32 memory_usage; /* in bytes */ -+ __u32 drop_overmemory; - }; - - struct tc_fq_codel_cl_stats { ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -58,8 +58,11 @@ struct fq_codel_sched_data { - u32 perturbation; /* hash perturbation */ - u32 quantum; /* psched_mtu(qdisc_dev(sch)); */ - u32 drop_batch_size; -+ u32 memory_limit; - struct codel_params cparams; - struct codel_stats cstats; -+ u32 memory_usage; -+ u32 drop_overmemory; - u32 drop_overlimit; - u32 new_flow_count; - -@@ -141,6 +144,7 @@ static unsigned int fq_codel_drop(struct - unsigned int maxbacklog = 0, idx = 0, i, len; - struct fq_codel_flow *flow; - unsigned int threshold; -+ unsigned int mem = 0; - - /* Queue is full! Find the fat flow and drop packet(s) from it. - * This might sound expensive, but with 1024 flows, we scan -@@ -165,11 +169,13 @@ static unsigned int fq_codel_drop(struct - do { - skb = dequeue_head(flow); - len += qdisc_pkt_len(skb); -+ mem += skb->truesize; - kfree_skb(skb); - } while (++i < max_packets && len < threshold); - - flow->dropped += i; - q->backlogs[idx] -= len; -+ q->memory_usage -= mem; - sch->qstats.drops += i; - sch->qstats.backlog -= len; - sch->q.qlen -= i; -@@ -191,6 +197,7 @@ static int fq_codel_enqueue(struct sk_bu - unsigned int idx, prev_backlog, prev_qlen; - struct fq_codel_flow *flow; - int uninitialized_var(ret); -+ bool memory_limited; - - idx = fq_codel_classify(skb, sch, &ret); - if (idx == 0) { -@@ -213,7 +220,9 @@ static int fq_codel_enqueue(struct sk_bu - flow->deficit = q->quantum; - flow->dropped = 0; - } -- if (++sch->q.qlen <= sch->limit) -+ q->memory_usage += skb->truesize; -+ memory_limited = q->memory_usage > q->memory_limit; -+ if (++sch->q.qlen <= sch->limit && !memory_limited) - return NET_XMIT_SUCCESS; - - prev_backlog = sch->qstats.backlog; -@@ -227,7 +236,8 @@ static int fq_codel_enqueue(struct sk_bu - ret = fq_codel_drop(sch, q->drop_batch_size); - - q->drop_overlimit += prev_qlen - sch->q.qlen; -- -+ if (memory_limited) -+ q->drop_overmemory += prev_qlen - sch->q.qlen; - /* As we dropped packet(s), better let upper stack know this */ - qdisc_tree_reduce_backlog(sch, prev_qlen - sch->q.qlen, - prev_backlog - sch->qstats.backlog); -@@ -296,6 +306,7 @@ begin: - list_del_init(&flow->flowchain); - goto begin; - } -+ q->memory_usage -= skb->truesize; - qdisc_bstats_update(sch, skb); - flow->deficit -= qdisc_pkt_len(skb); - /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0, -@@ -343,6 +354,7 @@ static const struct nla_policy fq_codel_ - [TCA_FQ_CODEL_QUANTUM] = { .type = NLA_U32 }, - [TCA_FQ_CODEL_CE_THRESHOLD] = { .type = NLA_U32 }, - [TCA_FQ_CODEL_DROP_BATCH_SIZE] = { .type = NLA_U32 }, -+ [TCA_FQ_CODEL_MEMORY_LIMIT] = { .type = NLA_U32 }, - }; - - static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt) -@@ -397,7 +409,11 @@ static int fq_codel_change(struct Qdisc - if (tb[TCA_FQ_CODEL_DROP_BATCH_SIZE]) - q->drop_batch_size = min(1U, nla_get_u32(tb[TCA_FQ_CODEL_DROP_BATCH_SIZE])); - -- while (sch->q.qlen > sch->limit) { -+ if (tb[TCA_FQ_CODEL_MEMORY_LIMIT]) -+ q->memory_limit = min(1U << 31, nla_get_u32(tb[TCA_FQ_CODEL_MEMORY_LIMIT])); -+ -+ while (sch->q.qlen > sch->limit || -+ q->memory_usage > q->memory_limit) { - struct sk_buff *skb = fq_codel_dequeue(sch); - - q->cstats.drop_len += qdisc_pkt_len(skb); -@@ -442,6 +458,7 @@ static int fq_codel_init(struct Qdisc *s - - sch->limit = 10*1024; - q->flows_cnt = 1024; -+ q->memory_limit = 32 << 20; /* 32 MBytes */ - q->drop_batch_size = 64; - q->quantum = psched_mtu(qdisc_dev(sch)); - q->perturbation = prandom_u32(); -@@ -502,6 +519,8 @@ static int fq_codel_dump(struct Qdisc *s - q->quantum) || - nla_put_u32(skb, TCA_FQ_CODEL_DROP_BATCH_SIZE, - q->drop_batch_size) || -+ nla_put_u32(skb, TCA_FQ_CODEL_MEMORY_LIMIT, -+ q->memory_limit) || - nla_put_u32(skb, TCA_FQ_CODEL_FLOWS, - q->flows_cnt)) - goto nla_put_failure; -@@ -530,6 +549,8 @@ static int fq_codel_dump_stats(struct Qd - st.qdisc_stats.ecn_mark = q->cstats.ecn_mark; - st.qdisc_stats.new_flow_count = q->new_flow_count; - st.qdisc_stats.ce_mark = q->cstats.ce_mark; -+ st.qdisc_stats.memory_usage = q->memory_usage; -+ st.qdisc_stats.drop_overmemory = q->drop_overmemory; - - list_for_each(pos, &q->new_flows) - st.qdisc_stats.new_flows_len++; diff --git a/target/linux/generic/pending-4.4/034-fq_codel-fix-memory-limitation-drift.patch b/target/linux/generic/pending-4.4/034-fq_codel-fix-memory-limitation-drift.patch deleted file mode 100644 index 45fff7bae9..0000000000 --- a/target/linux/generic/pending-4.4/034-fq_codel-fix-memory-limitation-drift.patch +++ /dev/null @@ -1,40 +0,0 @@ -From: Eric Dumazet <edumazet@google.com> -Date: Sun, 15 May 2016 18:16:38 -0700 -Subject: [PATCH] fq_codel: fix memory limitation drift - -memory_usage must be decreased in dequeue_func(), not in -fq_codel_dequeue(), otherwise packets dropped by Codel algo -are missing this decrease. - -Also we need to clear memory_usage in fq_codel_reset() - -Fixes: 95b58430abe7 ("fq_codel: add memory limitation per queue") -Signed-off-by: Eric Dumazet <edumazet@google.com> ---- - ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -259,6 +259,7 @@ static struct sk_buff *dequeue(struct co - if (flow->head) { - skb = dequeue_head(flow); - q->backlogs[flow - q->flows] -= qdisc_pkt_len(skb); -+ q->memory_usage -= skb->truesize; - sch->q.qlen--; - } - return skb; -@@ -306,7 +307,6 @@ begin: - list_del_init(&flow->flowchain); - goto begin; - } -- q->memory_usage -= skb->truesize; - qdisc_bstats_update(sch, skb); - flow->deficit -= qdisc_pkt_len(skb); - /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0, -@@ -343,6 +343,7 @@ static void fq_codel_reset(struct Qdisc - } - memset(q->backlogs, 0, q->flows_cnt * sizeof(u32)); - sch->q.qlen = 0; -+ q->memory_usage = 0; - } - - static const struct nla_policy fq_codel_policy[TCA_FQ_CODEL_MAX + 1] = { diff --git a/target/linux/generic/pending-4.4/035-fq_codel-fix-NET_XMIT_CN-behavior.patch b/target/linux/generic/pending-4.4/035-fq_codel-fix-NET_XMIT_CN-behavior.patch deleted file mode 100644 index a1902fea07..0000000000 --- a/target/linux/generic/pending-4.4/035-fq_codel-fix-NET_XMIT_CN-behavior.patch +++ /dev/null @@ -1,70 +0,0 @@ -From: Eric Dumazet <edumazet@google.com> -Date: Sat, 4 Jun 2016 12:55:13 -0700 -Subject: [PATCH] fq_codel: fix NET_XMIT_CN behavior - -My prior attempt to fix the backlogs of parents failed. - -If we return NET_XMIT_CN, our parents wont increase their backlog, -so our qdisc_tree_reduce_backlog() should take this into account. - -v2: Florian Westphal pointed out that we could drop the packet, -so we need to save qdisc_pkt_len(skb) in a temp variable before -calling fq_codel_drop() - -Fixes: 9d18562a2278 ("fq_codel: add batch ability to fq_codel_drop()") -Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") -Reported-by: Stas Nichiporovich <stasn77@gmail.com> -Signed-off-by: Eric Dumazet <edumazet@google.com> -Cc: WANG Cong <xiyou.wangcong@gmail.com> -Cc: Jamal Hadi Salim <jhs@mojatatu.com> ---- - ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -197,6 +197,7 @@ static int fq_codel_enqueue(struct sk_bu - unsigned int idx, prev_backlog, prev_qlen; - struct fq_codel_flow *flow; - int uninitialized_var(ret); -+ unsigned int pkt_len; - bool memory_limited; - - idx = fq_codel_classify(skb, sch, &ret); -@@ -228,6 +229,8 @@ static int fq_codel_enqueue(struct sk_bu - prev_backlog = sch->qstats.backlog; - prev_qlen = sch->q.qlen; - -+ /* save this packet length as it might be dropped by fq_codel_drop() */ -+ pkt_len = qdisc_pkt_len(skb); - /* fq_codel_drop() is quite expensive, as it performs a linear search - * in q->backlogs[] to find a fat flow. - * So instead of dropping a single packet, drop half of its backlog -@@ -235,14 +238,23 @@ static int fq_codel_enqueue(struct sk_bu - */ - ret = fq_codel_drop(sch, q->drop_batch_size); - -- q->drop_overlimit += prev_qlen - sch->q.qlen; -+ prev_qlen -= sch->q.qlen; -+ prev_backlog -= sch->qstats.backlog; -+ q->drop_overlimit += prev_qlen; - if (memory_limited) -- q->drop_overmemory += prev_qlen - sch->q.qlen; -- /* As we dropped packet(s), better let upper stack know this */ -- qdisc_tree_reduce_backlog(sch, prev_qlen - sch->q.qlen, -- prev_backlog - sch->qstats.backlog); -+ q->drop_overmemory += prev_qlen; - -- return ret == idx ? NET_XMIT_CN : NET_XMIT_SUCCESS; -+ /* As we dropped packet(s), better let upper stack know this. -+ * If we dropped a packet for this flow, return NET_XMIT_CN, -+ * but in this case, our parents wont increase their backlogs. -+ */ -+ if (ret == idx) { -+ qdisc_tree_reduce_backlog(sch, prev_qlen - 1, -+ prev_backlog - pkt_len); -+ return NET_XMIT_CN; -+ } -+ qdisc_tree_reduce_backlog(sch, prev_qlen, prev_backlog); -+ return NET_XMIT_SUCCESS; - } - - /* This is the specific function called from codel_dequeue() diff --git a/target/linux/generic/pending-4.4/041-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch b/target/linux/generic/pending-4.4/041-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch deleted file mode 100644 index 8214013c56..0000000000 --- a/target/linux/generic/pending-4.4/041-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 2c81de771f38e54324ede3f24118f4852570b384 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 26 Nov 2015 09:05:04 +0100 -Subject: [PATCH] mtd: spi-nor: include mtd.h header for struct mtd_info - definition -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -So far struct spi_nor was using just a pointer to struct mtd_info so it -wasn't needed to have it fully defined there. After recent change we -embed whole struct so we need to include a proper header. - -Fixes: 1976367173a4 ("mtd: spi-nor: embed struct mtd_info within struct spi_nor") -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - include/linux/mtd/spi-nor.h | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/include/linux/mtd/spi-nor.h -+++ b/include/linux/mtd/spi-nor.h -@@ -12,6 +12,7 @@ - - #include <linux/bitops.h> - #include <linux/mtd/cfi.h> -+#include <linux/mtd/mtd.h> - - /* - * Manufacturer IDs -@@ -117,8 +118,6 @@ enum spi_nor_option_flags { - SNOR_F_USE_FSR = BIT(0), - }; - --struct mtd_info; -- - /** - * struct spi_nor - Structure for defining a the SPI NOR layer - * @mtd: point to a mtd_info structure diff --git a/target/linux/generic/pending-4.4/042-0001-mtd-bcm47xxsflash-use-ioremap_cache-instead-of-KSEG0.patch b/target/linux/generic/pending-4.4/042-0001-mtd-bcm47xxsflash-use-ioremap_cache-instead-of-KSEG0.patch deleted file mode 100644 index 89f1e5eccf..0000000000 --- a/target/linux/generic/pending-4.4/042-0001-mtd-bcm47xxsflash-use-ioremap_cache-instead-of-KSEG0.patch +++ /dev/null @@ -1,138 +0,0 @@ -From 5651d6aaf489d1db48c253cf884b40214e91c2c5 Mon Sep 17 00:00:00 2001 -From: Brian Norris <computersforpeace@gmail.com> -Date: Fri, 26 Feb 2016 11:50:28 +0100 -Subject: [PATCH] mtd: bcm47xxsflash: use ioremap_cache() instead of - KSEG0ADDR() -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Using KSEG0ADDR makes code highly MIPS dependent and not portable. -Thanks to the fix a68f376 ("MIPS: io.h: Define `ioremap_cache'") we can -use ioremap_cache which is generic and supported on MIPS as well now. - -KSEG0ADDR was translating 0x1c000000 into 0x9c000000. With ioremap_cache -we use MIPS's __ioremap (and then remap_area_pages). This results in -different address (e.g. 0xc0080000) but it still should be cached as -expected and it was successfully tested with BCM47186B0. - -Other than that drivers/bcma/driver_chipcommon_sflash.c nicely setups a -struct resource for access window, but we wren't using it. Use it now -and drop duplicated info. - -Signed-off-by: Brian Norris <computersforpeace@gmail.com> -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> ---- - ---- a/drivers/bcma/driver_chipcommon_sflash.c -+++ b/drivers/bcma/driver_chipcommon_sflash.c -@@ -146,7 +146,6 @@ int bcma_sflash_init(struct bcma_drv_cc - return -ENOTSUPP; - } - -- sflash->window = BCMA_SOC_FLASH2; - sflash->blocksize = e->blocksize; - sflash->numblocks = e->numblocks; - sflash->size = sflash->blocksize * sflash->numblocks; ---- a/drivers/mtd/devices/bcm47xxsflash.c -+++ b/drivers/mtd/devices/bcm47xxsflash.c -@@ -2,6 +2,7 @@ - #include <linux/module.h> - #include <linux/slab.h> - #include <linux/delay.h> -+#include <linux/ioport.h> - #include <linux/mtd/mtd.h> - #include <linux/platform_device.h> - #include <linux/bcma/bcma.h> -@@ -109,8 +110,7 @@ static int bcm47xxsflash_read(struct mtd - if ((from + len) > mtd->size) - return -EINVAL; - -- memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from), -- len); -+ memcpy_fromio(buf, b47s->window + from, len); - *retlen = len; - - return len; -@@ -275,15 +275,33 @@ static void bcm47xxsflash_bcma_cc_write( - - static int bcm47xxsflash_bcma_probe(struct platform_device *pdev) - { -- struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); -+ struct device *dev = &pdev->dev; -+ struct bcma_sflash *sflash = dev_get_platdata(dev); - struct bcm47xxsflash *b47s; -+ struct resource *res; - int err; - -- b47s = devm_kzalloc(&pdev->dev, sizeof(*b47s), GFP_KERNEL); -+ b47s = devm_kzalloc(dev, sizeof(*b47s), GFP_KERNEL); - if (!b47s) - return -ENOMEM; - sflash->priv = b47s; - -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(dev, "invalid resource\n"); -+ return -EINVAL; -+ } -+ if (!devm_request_mem_region(dev, res->start, resource_size(res), -+ res->name)) { -+ dev_err(dev, "can't request region for resource %pR\n", res); -+ return -EBUSY; -+ } -+ b47s->window = ioremap_cache(res->start, resource_size(res)); -+ if (!b47s->window) { -+ dev_err(dev, "ioremap failed for resource %pR\n", res); -+ return -ENOMEM; -+ } -+ - b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash); - b47s->cc_read = bcm47xxsflash_bcma_cc_read; - b47s->cc_write = bcm47xxsflash_bcma_cc_write; -@@ -297,7 +315,6 @@ static int bcm47xxsflash_bcma_probe(stru - break; - } - -- b47s->window = sflash->window; - b47s->blocksize = sflash->blocksize; - b47s->numblocks = sflash->numblocks; - b47s->size = sflash->size; -@@ -306,6 +323,7 @@ static int bcm47xxsflash_bcma_probe(stru - err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0); - if (err) { - pr_err("Failed to register MTD device: %d\n", err); -+ iounmap(b47s->window); - return err; - } - -@@ -321,6 +339,7 @@ static int bcm47xxsflash_bcma_remove(str - struct bcm47xxsflash *b47s = sflash->priv; - - mtd_device_unregister(&b47s->mtd); -+ iounmap(b47s->window); - - return 0; - } ---- a/drivers/mtd/devices/bcm47xxsflash.h -+++ b/drivers/mtd/devices/bcm47xxsflash.h -@@ -65,7 +65,8 @@ struct bcm47xxsflash { - - enum bcm47xxsflash_type type; - -- u32 window; -+ void __iomem *window; -+ - u32 blocksize; - u16 numblocks; - u32 size; ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -588,7 +588,6 @@ struct bcma_pflash { - #ifdef CONFIG_BCMA_SFLASH - struct bcma_sflash { - bool present; -- u32 window; - u32 blocksize; - u16 numblocks; - u32 size; diff --git a/target/linux/generic/pending-4.4/042-0002-mtd-add-arch-dependency-for-MTD_BCM47XXSFLASH-symbol.patch b/target/linux/generic/pending-4.4/042-0002-mtd-add-arch-dependency-for-MTD_BCM47XXSFLASH-symbol.patch deleted file mode 100644 index b7ff055ab1..0000000000 --- a/target/linux/generic/pending-4.4/042-0002-mtd-add-arch-dependency-for-MTD_BCM47XXSFLASH-symbol.patch +++ /dev/null @@ -1,41 +0,0 @@ -From efacc699139e13f9d3ed8b47df92acb88ff8479f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 19 Jul 2016 09:08:32 +0200 -Subject: [PATCH] mtd: add arch dependency for MTD_BCM47XXSFLASH symbol -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -We dropped strict MIPS dependency for bcm47xxsflash driver in: -commit 5651d6aaf489 ("mtd: bcm47xxsflash: use ioremap_cache() instead of -KSEG0ADDR()") but using ioremap_cache still limits building it to few -selected architectures only. - -A recent commit 57d8f7dd2132 ("bcma: allow enabling serial flash support -on non-MIPS SoCs") automatically dropped MIPS dependency for -MTD_BCM47XXSFLASH which broke building e.g. on powerpc and cris. - -The bcma change is alright as it doesn't break building bcma code in any -way. MTD_BCM47XXSFLASH on the other hand should be limited to archs -which need it and can build it (by providing ioremap_cache). - -Fixes: 57d8f7dd2132 ("bcma: allow enabling serial flash support on non-MIPS SoCs") -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Cc: Brian Norris <computersforpeace@gmail.com> -Acked-by: Brian Norris <computersforpeace@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - drivers/mtd/devices/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/devices/Kconfig -+++ b/drivers/mtd/devices/Kconfig -@@ -114,7 +114,7 @@ config MTD_SST25L - - config MTD_BCM47XXSFLASH - tristate "R/O support for serial flash on BCMA bus" -- depends on BCMA_SFLASH -+ depends on BCMA_SFLASH && (MIPS || ARM) - help - BCMA bus can have various flash memories attached, they are - registered by bcma as platform devices. This enables driver for diff --git a/target/linux/generic/pending-4.4/042-0003-mtd-bcm47xxsflash-use-uncached-MMIO-access-for-BCM53.patch b/target/linux/generic/pending-4.4/042-0003-mtd-bcm47xxsflash-use-uncached-MMIO-access-for-BCM53.patch deleted file mode 100644 index c2f2d21d03..0000000000 --- a/target/linux/generic/pending-4.4/042-0003-mtd-bcm47xxsflash-use-uncached-MMIO-access-for-BCM53.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 64ad46379fcf14f437553f654d1adcd3d0e0d7f9 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 15 Aug 2016 14:21:28 +0200 -Subject: [PATCH] mtd: bcm47xxsflash: use uncached MMIO access for BCM53573 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and uses -this old ChipCommon-based flash access. Early tests resulted in flash -corruptions that were tracked down to using cached MMIO for flash read -access. Switch to ioremap_nocache conditionally to support BCM53573 and -don't break performance on old MIPS devices. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - drivers/mtd/devices/bcm47xxsflash.c | 24 +++++++++++++++++++----- - 1 file changed, 19 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/devices/bcm47xxsflash.c -+++ b/drivers/mtd/devices/bcm47xxsflash.c -@@ -296,16 +296,30 @@ static int bcm47xxsflash_bcma_probe(stru - dev_err(dev, "can't request region for resource %pR\n", res); - return -EBUSY; - } -- b47s->window = ioremap_cache(res->start, resource_size(res)); -- if (!b47s->window) { -- dev_err(dev, "ioremap failed for resource %pR\n", res); -- return -ENOMEM; -- } - - b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash); - b47s->cc_read = bcm47xxsflash_bcma_cc_read; - b47s->cc_write = bcm47xxsflash_bcma_cc_write; - -+ /* -+ * On old MIPS devices cache was magically invalidated when needed, -+ * allowing us to use cached access and gain some performance. Trying -+ * the same on ARM based BCM53573 results in flash corruptions, we need -+ * to use uncached access for it. -+ * -+ * It may be arch specific, but right now there is only 1 ARM SoC using -+ * this driver, so let's follow Broadcom's reference code and check -+ * ChipCommon revision. -+ */ -+ if (b47s->bcma_cc->core->id.rev == 54) -+ b47s->window = ioremap_nocache(res->start, resource_size(res)); -+ else -+ b47s->window = ioremap_cache(res->start, resource_size(res)); -+ if (!b47s->window) { -+ dev_err(dev, "ioremap failed for resource %pR\n", res); -+ return -ENOMEM; -+ } -+ - switch (b47s->bcma_cc->capabilities & BCMA_CC_CAP_FLASHT) { - case BCMA_CC_FLASHT_STSER: - b47s->type = BCM47XXSFLASH_TYPE_ST; diff --git a/target/linux/generic/pending-4.4/042-0005-mtd-bcm47xxsflash-use-platform_-set-get-_drvdata.patch b/target/linux/generic/pending-4.4/042-0005-mtd-bcm47xxsflash-use-platform_-set-get-_drvdata.patch deleted file mode 100644 index a68eaa4594..0000000000 --- a/target/linux/generic/pending-4.4/042-0005-mtd-bcm47xxsflash-use-platform_-set-get-_drvdata.patch +++ /dev/null @@ -1,63 +0,0 @@ -From be5e5099183301fb7920f8f6b66bd3ac1f820a97 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 16 Jan 2017 17:28:18 +0100 -Subject: [PATCH] mtd: bcm47xxsflash: use platform_(set|get)_drvdata -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -We have generic place & helpers for storing platform driver data so -there is no reason for using custom priv pointer. - -This allows cleaning up struct bcma_sflash from unneeded fields. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Acked-by: Kalle Valo <kvalo@codeaurora.org> -Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - drivers/mtd/devices/bcm47xxsflash.c | 6 +++--- - include/linux/bcma/bcma_driver_chipcommon.h | 3 --- - 2 files changed, 3 insertions(+), 6 deletions(-) - ---- a/drivers/mtd/devices/bcm47xxsflash.c -+++ b/drivers/mtd/devices/bcm47xxsflash.c -@@ -284,7 +284,6 @@ static int bcm47xxsflash_bcma_probe(stru - b47s = devm_kzalloc(dev, sizeof(*b47s), GFP_KERNEL); - if (!b47s) - return -ENOMEM; -- sflash->priv = b47s; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { -@@ -334,6 +333,8 @@ static int bcm47xxsflash_bcma_probe(stru - b47s->size = sflash->size; - bcm47xxsflash_fill_mtd(b47s, &pdev->dev); - -+ platform_set_drvdata(pdev, b47s); -+ - err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0); - if (err) { - pr_err("Failed to register MTD device: %d\n", err); -@@ -349,8 +350,7 @@ static int bcm47xxsflash_bcma_probe(stru - - static int bcm47xxsflash_bcma_remove(struct platform_device *pdev) - { -- struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); -- struct bcm47xxsflash *b47s = sflash->priv; -+ struct bcm47xxsflash *b47s = platform_get_drvdata(pdev); - - mtd_device_unregister(&b47s->mtd); - iounmap(b47s->window); ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -591,9 +591,6 @@ struct bcma_sflash { - u32 blocksize; - u16 numblocks; - u32 size; -- -- struct mtd_info *mtd; -- void *priv; - }; - #endif - diff --git a/target/linux/generic/pending-4.4/042-0006-mtd-bcm47xxsflash-support-reading-flash-out-of-mappi.patch b/target/linux/generic/pending-4.4/042-0006-mtd-bcm47xxsflash-support-reading-flash-out-of-mappi.patch deleted file mode 100644 index ecdae2a871..0000000000 --- a/target/linux/generic/pending-4.4/042-0006-mtd-bcm47xxsflash-support-reading-flash-out-of-mappi.patch +++ /dev/null @@ -1,81 +0,0 @@ -From ccc38234fdc70120be79e7fb2df5c27ca5cd4c8a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 8 Feb 2017 23:53:44 +0100 -Subject: [PATCH] mtd: bcm47xxsflash: support reading flash out of mapping - window -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -For reading flash content we use MMIO but it's possible to read only -first 16 MiB this way. It's simply an arch design/limitation. -To support flash sizes bigger than 16 MiB implement indirect access -using ChipCommon registers. -This has been tested using MX25L25635F. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Acked-by: Marek Vasut <marek.vasut@gmail.com> -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - drivers/mtd/devices/bcm47xxsflash.c | 24 +++++++++++++++++++++--- - drivers/mtd/devices/bcm47xxsflash.h | 3 +++ - 2 files changed, 24 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/devices/bcm47xxsflash.c -+++ b/drivers/mtd/devices/bcm47xxsflash.c -@@ -105,15 +105,33 @@ static int bcm47xxsflash_read(struct mtd - size_t *retlen, u_char *buf) - { - struct bcm47xxsflash *b47s = mtd->priv; -+ size_t orig_len = len; - - /* Check address range */ - if ((from + len) > mtd->size) - return -EINVAL; - -- memcpy_fromio(buf, b47s->window + from, len); -- *retlen = len; -+ /* Read as much as possible using fast MMIO window */ -+ if (from < BCM47XXSFLASH_WINDOW_SZ) { -+ size_t memcpy_len; - -- return len; -+ memcpy_len = min(len, (size_t)(BCM47XXSFLASH_WINDOW_SZ - from)); -+ memcpy_fromio(buf, b47s->window + from, memcpy_len); -+ from += memcpy_len; -+ len -= memcpy_len; -+ buf += memcpy_len; -+ } -+ -+ /* Use indirect access for content out of the window */ -+ for (; len; len--) { -+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, from++); -+ bcm47xxsflash_cmd(b47s, OPCODE_ST_READ4B); -+ *buf++ = b47s->cc_read(b47s, BCMA_CC_FLASHDATA); -+ } -+ -+ *retlen = orig_len; -+ -+ return orig_len; - } - - static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len, ---- a/drivers/mtd/devices/bcm47xxsflash.h -+++ b/drivers/mtd/devices/bcm47xxsflash.h -@@ -3,6 +3,8 @@ - - #include <linux/mtd/mtd.h> - -+#define BCM47XXSFLASH_WINDOW_SZ SZ_16M -+ - /* Used for ST flashes only. */ - #define OPCODE_ST_WREN 0x0006 /* Write Enable */ - #define OPCODE_ST_WRDIS 0x0004 /* Write Disable */ -@@ -16,6 +18,7 @@ - #define OPCODE_ST_RES 0x03ab /* Read Electronic Signature */ - #define OPCODE_ST_CSA 0x1000 /* Keep chip select asserted */ - #define OPCODE_ST_SSE 0x0220 /* Sub-sector Erase */ -+#define OPCODE_ST_READ4B 0x6313 /* Read Data Bytes in 4Byte addressing mode */ - - /* Used for Atmel flashes only. */ - #define OPCODE_AT_READ 0x07e8 diff --git a/target/linux/generic/pending-4.4/042-0007-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch b/target/linux/generic/pending-4.4/042-0007-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch deleted file mode 100644 index 4ef7e7f5d8..0000000000 --- a/target/linux/generic/pending-4.4/042-0007-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch +++ /dev/null @@ -1,180 +0,0 @@ -From b522d7b0ebe3539340c2a6d46d787ae3d33bcb92 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 10 Jan 2017 23:15:24 +0100 -Subject: [PATCH] mtd: bcm47xxpart: move TRX parsing code to separated function -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This change simplifies main parsing loop logic a bit. In future it may -be useful for moving TRX support to separated module / parser (if we -implement support for them at some point). -Finally parsing TRX at the end puts us in a better position as we have -better flash layout knowledge. It may be useful e.g. if it appears there -is more than 1 TRX partition. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Acked-by: Marek Vasut <marek.vasut@gmail.com> -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - drivers/mtd/bcm47xxpart.c | 121 ++++++++++++++++++++++++++++------------------ - 1 file changed, 74 insertions(+), 47 deletions(-) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -83,6 +83,67 @@ out_default: - return "rootfs"; - } - -+static int bcm47xxpart_parse_trx(struct mtd_info *master, -+ struct mtd_partition *trx, -+ struct mtd_partition *parts, -+ size_t parts_len) -+{ -+ struct trx_header header; -+ size_t bytes_read; -+ int curr_part = 0; -+ int i, err; -+ -+ if (parts_len < 3) { -+ pr_warn("No enough space to add TRX partitions!\n"); -+ return -ENOMEM; -+ } -+ -+ err = mtd_read(master, trx->offset, sizeof(header), &bytes_read, -+ (uint8_t *)&header); -+ if (err && !mtd_is_bitflip(err)) { -+ pr_err("mtd_read error while reading TRX header: %d\n", err); -+ return err; -+ } -+ -+ i = 0; -+ -+ /* We have LZMA loader if offset[2] points to sth */ -+ if (header.offset[2]) { -+ bcm47xxpart_add_part(&parts[curr_part++], "loader", -+ trx->offset + header.offset[i], 0); -+ i++; -+ } -+ -+ if (header.offset[i]) { -+ bcm47xxpart_add_part(&parts[curr_part++], "linux", -+ trx->offset + header.offset[i], 0); -+ i++; -+ } -+ -+ if (header.offset[i]) { -+ size_t offset = trx->offset + header.offset[i]; -+ const char *name = bcm47xxpart_trx_data_part_name(master, -+ offset); -+ -+ bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0); -+ i++; -+ } -+ -+ /* -+ * Assume that every partition ends at the beginning of the one it is -+ * followed by. -+ */ -+ for (i = 0; i < curr_part; i++) { -+ u64 next_part_offset = (i < curr_part - 1) ? -+ parts[i + 1].offset : -+ trx->offset + trx->size; -+ -+ parts[i].size = next_part_offset - parts[i].offset; -+ } -+ -+ return curr_part; -+} -+ - static int bcm47xxpart_parse(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -93,9 +154,7 @@ static int bcm47xxpart_parse(struct mtd_ - size_t bytes_read; - uint32_t offset; - uint32_t blocksize = master->erasesize; -- struct trx_header *trx; - int trx_part = -1; -- int last_trx_part = -1; - int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; - int err; - -@@ -182,54 +241,14 @@ static int bcm47xxpart_parse(struct mtd_ - - /* TRX */ - if (buf[0x000 / 4] == TRX_MAGIC) { -- if (BCM47XXPART_MAX_PARTS - curr_part < 4) { -- pr_warn("Not enough partitions left to register trx, scanning stopped!\n"); -- break; -- } -- -- trx = (struct trx_header *)buf; -+ struct trx_header *trx; - - trx_part = curr_part; - bcm47xxpart_add_part(&parts[curr_part++], "firmware", - offset, 0); - -- i = 0; -- /* We have LZMA loader if offset[2] points to sth */ -- if (trx->offset[2]) { -- bcm47xxpart_add_part(&parts[curr_part++], -- "loader", -- offset + trx->offset[i], -- 0); -- i++; -- } -- -- if (trx->offset[i]) { -- bcm47xxpart_add_part(&parts[curr_part++], -- "linux", -- offset + trx->offset[i], -- 0); -- i++; -- } -- -- /* -- * Pure rootfs size is known and can be calculated as: -- * trx->length - trx->offset[i]. We don't fill it as -- * we want to have jffs2 (overlay) in the same mtd. -- */ -- if (trx->offset[i]) { -- const char *name; -- -- name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]); -- bcm47xxpart_add_part(&parts[curr_part++], -- name, -- offset + trx->offset[i], -- 0); -- i++; -- } -- -- last_trx_part = curr_part - 1; -- - /* Jump to the end of TRX */ -+ trx = (struct trx_header *)buf; - offset = roundup(offset + trx->length, blocksize); - /* Next loop iteration will increase the offset */ - offset -= blocksize; -@@ -307,9 +326,17 @@ static int bcm47xxpart_parse(struct mtd_ - parts[i + 1].offset : master->size; - - parts[i].size = next_part_offset - parts[i].offset; -- if (i == last_trx_part && trx_part >= 0) -- parts[trx_part].size = next_part_offset - -- parts[trx_part].offset; -+ } -+ -+ /* If there was TRX parse it now */ -+ if (trx_part >= 0) { -+ int num_parts; -+ -+ num_parts = bcm47xxpart_parse_trx(master, &parts[trx_part], -+ parts + curr_part, -+ BCM47XXPART_MAX_PARTS - curr_part); -+ if (num_parts > 0) -+ curr_part += num_parts; - } - - *pparts = parts; diff --git a/target/linux/generic/pending-4.4/042-0008-mtd-bcm47xxpart-support-layouts-with-multiple-TRX-pa.patch b/target/linux/generic/pending-4.4/042-0008-mtd-bcm47xxpart-support-layouts-with-multiple-TRX-pa.patch deleted file mode 100644 index 6c6c8397df..0000000000 --- a/target/linux/generic/pending-4.4/042-0008-mtd-bcm47xxpart-support-layouts-with-multiple-TRX-pa.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 89a0d9a9f1941a086a82bc7cd73d275cec98ba14 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 10 Jan 2017 23:15:25 +0100 -Subject: [PATCH] mtd: bcm47xxpart: support layouts with multiple TRX - partitions -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Some devices may have an extra TRX partition used as failsafe one. If -we detect such partition we should set a proper name for it and don't -parse it. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Acked-by: Marek Vasut <marek.vasut@gmail.com> -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - drivers/mtd/bcm47xxpart.c | 56 ++++++++++++++++++++++++++++++++++++++--------- - 1 file changed, 46 insertions(+), 10 deletions(-) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -9,6 +9,7 @@ - * - */ - -+#include <linux/bcm47xx_nvram.h> - #include <linux/module.h> - #include <linux/kernel.h> - #include <linux/slab.h> -@@ -144,6 +145,30 @@ static int bcm47xxpart_parse_trx(struct - return curr_part; - } - -+/** -+ * bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader -+ * -+ * Some devices may have more than one TRX partition. In such case one of them -+ * is the main one and another a failsafe one. Bootloader may fallback to the -+ * failsafe firmware if it detects corruption of the main image. -+ * -+ * This function provides info about currently used TRX partition. It's the one -+ * containing kernel started by the bootloader. -+ */ -+static int bcm47xxpart_bootpartition(void) -+{ -+ char buf[4]; -+ int bootpartition; -+ -+ /* Check CFE environment variable */ -+ if (bcm47xx_nvram_getenv("bootpartition", buf, sizeof(buf)) > 0) { -+ if (!kstrtoint(buf, 0, &bootpartition)) -+ return bootpartition; -+ } -+ -+ return 0; -+} -+ - static int bcm47xxpart_parse(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -154,7 +179,8 @@ static int bcm47xxpart_parse(struct mtd_ - size_t bytes_read; - uint32_t offset; - uint32_t blocksize = master->erasesize; -- int trx_part = -1; -+ int trx_parts[2]; /* Array with indexes of TRX partitions */ -+ int trx_num = 0; /* Number of found TRX partitions */ - int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; - int err; - -@@ -243,7 +269,11 @@ static int bcm47xxpart_parse(struct mtd_ - if (buf[0x000 / 4] == TRX_MAGIC) { - struct trx_header *trx; - -- trx_part = curr_part; -+ if (trx_num >= ARRAY_SIZE(trx_parts)) -+ pr_warn("No enough space to store another TRX found at 0x%X\n", -+ offset); -+ else -+ trx_parts[trx_num++] = curr_part; - bcm47xxpart_add_part(&parts[curr_part++], "firmware", - offset, 0); - -@@ -329,14 +359,20 @@ static int bcm47xxpart_parse(struct mtd_ - } - - /* If there was TRX parse it now */ -- if (trx_part >= 0) { -- int num_parts; -+ for (i = 0; i < trx_num; i++) { -+ struct mtd_partition *trx = &parts[trx_parts[i]]; - -- num_parts = bcm47xxpart_parse_trx(master, &parts[trx_part], -- parts + curr_part, -- BCM47XXPART_MAX_PARTS - curr_part); -- if (num_parts > 0) -- curr_part += num_parts; -+ if (i == bcm47xxpart_bootpartition()) { -+ int num_parts; -+ -+ num_parts = bcm47xxpart_parse_trx(master, trx, -+ parts + curr_part, -+ BCM47XXPART_MAX_PARTS - curr_part); -+ if (num_parts > 0) -+ curr_part += num_parts; -+ } else { -+ trx->name = "failsafe"; -+ } - } - - *pparts = parts; diff --git a/target/linux/generic/pending-4.4/042-v4.18-0009-mtd-bcm47xxpart-improve-handling-TRX-partition-size.patch b/target/linux/generic/pending-4.4/042-v4.18-0009-mtd-bcm47xxpart-improve-handling-TRX-partition-size.patch deleted file mode 100644 index eb3f9bdfc8..0000000000 --- a/target/linux/generic/pending-4.4/042-v4.18-0009-mtd-bcm47xxpart-improve-handling-TRX-partition-size.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 237ea0d4762cc14d0fc80e80d61f0f08e1050c7f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 12 Apr 2018 07:24:52 +0200 -Subject: [PATCH] mtd: bcm47xxpart: improve handling TRX partition size -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -When bcm47xxpart finds a TRX partition (container) it's supposed to jump -to the end of it and keep looking for more partitions. TRX and its -subpartitions are handled by a separate parser. - -The problem with old code was relying on the length specified in a TRX -header. That isn't reliable as TRX is commonly modified to have checksum -cover only non-changing subpartitions. Otherwise modifying e.g. a rootfs -would result in CRC32 mismatch and bootloader refusing to boot a -firmware. - -Fix it by trying better to figure out a real TRX size. We can securely -assume that TRX has to cover all subpartitions and the last one is at -least of a block size in size. Then compare it with a length field. - -This makes code more optimal & reliable thanks to skipping data that -shouldn't be parsed. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> ---- - drivers/mtd/bcm47xxpart.c | 22 ++++++++++++++++++---- - 1 file changed, 18 insertions(+), 4 deletions(-) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -268,6 +268,8 @@ static int bcm47xxpart_parse(struct mtd_ - /* TRX */ - if (buf[0x000 / 4] == TRX_MAGIC) { - struct trx_header *trx; -+ uint32_t last_subpart; -+ uint32_t trx_size; - - if (trx_num >= ARRAY_SIZE(trx_parts)) - pr_warn("No enough space to store another TRX found at 0x%X\n", -@@ -277,11 +279,23 @@ static int bcm47xxpart_parse(struct mtd_ - bcm47xxpart_add_part(&parts[curr_part++], "firmware", - offset, 0); - -- /* Jump to the end of TRX */ -+ /* -+ * Try to find TRX size. The "length" field isn't fully -+ * reliable as it could be decreased to make CRC32 cover -+ * only part of TRX data. It's commonly used as checksum -+ * can't cover e.g. ever-changing rootfs partition. -+ * Use offsets as helpers for assuming min TRX size. -+ */ - trx = (struct trx_header *)buf; -- offset = roundup(offset + trx->length, blocksize); -- /* Next loop iteration will increase the offset */ -- offset -= blocksize; -+ last_subpart = max3(trx->offset[0], trx->offset[1], -+ trx->offset[2]); -+ trx_size = max(trx->length, last_subpart + blocksize); -+ -+ /* -+ * Skip the TRX data. Decrease offset by block size as -+ * the next loop iteration will increase it. -+ */ -+ offset += roundup(trx_size, blocksize) - blocksize; - continue; - } - diff --git a/target/linux/generic/pending-4.4/043-mtd-spi-nor-mx25l3205d-mx25l6405d-append-SECT_4K.patch b/target/linux/generic/pending-4.4/043-mtd-spi-nor-mx25l3205d-mx25l6405d-append-SECT_4K.patch deleted file mode 100644 index b7fd046a23..0000000000 --- a/target/linux/generic/pending-4.4/043-mtd-spi-nor-mx25l3205d-mx25l6405d-append-SECT_4K.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 0501f2e5ff28a02295e42fc9e7164a20ef4c30d5 Mon Sep 17 00:00:00 2001 -From: Andreas Fenkart <afenkart@gmail.com> -Date: Thu, 5 Nov 2015 10:04:23 +0100 -Subject: [PATCH] mtd: spi-nor: mx25l3205d/mx25l6405d: append SECT_4K - -according datasheet both chips can erase 4kByte sectors individually - -Signed-off-by: Andreas Fenkart <andreas.fenkart@dev.digitalstrom.org> -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - drivers/mtd/spi-nor/spi-nor.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -715,9 +715,9 @@ static const struct flash_info spi_nor_i - { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, - { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, - { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, -- { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, -+ { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) }, - { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, -- { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, -+ { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) }, - { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, diff --git a/target/linux/generic/pending-4.4/045-mtd-devices-m25p80-add-support-for-mmap-read-request.patch b/target/linux/generic/pending-4.4/045-mtd-devices-m25p80-add-support-for-mmap-read-request.patch deleted file mode 100644 index c4c7e6e01d..0000000000 --- a/target/linux/generic/pending-4.4/045-mtd-devices-m25p80-add-support-for-mmap-read-request.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 08922f644878c9163ada8df3ef9def89be1d5e90 Mon Sep 17 00:00:00 2001 -From: Vignesh R <vigneshr@ti.com> -Date: Tue, 29 Mar 2016 11:16:17 +0530 -Subject: [PATCH] mtd: devices: m25p80: add support for mmap read request - -Certain SPI controllers may provide accelerated hardware interface to -read from m25p80 type flash devices in order to provide better read -performance. SPI core supports such devices with spi_flash_read() API. -Call spi_flash_read(), if supported, to make use of such interface. - -Signed-off-by: Vignesh R <vigneshr@ti.com> -[Brian: add memset()] -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -131,6 +131,28 @@ static int m25p80_read(struct spi_nor *n - /* convert the dummy cycles to the number of bytes */ - dummy /= 8; - -+ if (spi_flash_read_supported(spi)) { -+ struct spi_flash_read_message msg; -+ int ret; -+ -+ memset(&msg, 0, sizeof(msg)); -+ -+ msg.buf = buf; -+ msg.from = from; -+ msg.len = len; -+ msg.read_opcode = nor->read_opcode; -+ msg.addr_width = nor->addr_width; -+ msg.dummy_bytes = dummy; -+ /* TODO: Support other combinations */ -+ msg.opcode_nbits = SPI_NBITS_SINGLE; -+ msg.addr_nbits = SPI_NBITS_SINGLE; -+ msg.data_nbits = m25p80_rx_nbits(nor); -+ -+ ret = spi_flash_read(spi, &msg); -+ *retlen = msg.retlen; -+ return ret; -+ } -+ - spi_message_init(&m); - memset(t, 0, (sizeof t)); - diff --git a/target/linux/generic/pending-4.4/046-ubifs-silence-error-output-if-MS_SILENT-is-set.patch b/target/linux/generic/pending-4.4/046-ubifs-silence-error-output-if-MS_SILENT-is-set.patch deleted file mode 100644 index 95de680989..0000000000 --- a/target/linux/generic/pending-4.4/046-ubifs-silence-error-output-if-MS_SILENT-is-set.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 1ae92642e5900316011736072b4fa91710840620 Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Sat, 18 Jun 2016 17:53:45 +0200 -Subject: [PATCH] ubifs: Silence error output if MS_SILENT is set - -This change completes commit -90bea5a3f0 ("UBIFS: respect MS_SILENT mount flag") -which already implements support for MS_SILENT except for that one -error message which is still being displayed despite MS_SILENT being -set. Suppress that error message as well in case MS_SILENT is set. - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> -[rw: massaged commit message] -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - fs/ubifs/super.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/fs/ubifs/super.c -+++ b/fs/ubifs/super.c -@@ -2107,8 +2107,9 @@ static struct dentry *ubifs_mount(struct - */ - ubi = open_ubi(name, UBI_READONLY); - if (IS_ERR(ubi)) { -- pr_err("UBIFS error (pid: %d): cannot open \"%s\", error %d", -- current->pid, name, (int)PTR_ERR(ubi)); -+ if (!(flags & MS_SILENT)) -+ pr_err("UBIFS error (pid: %d): cannot open \"%s\", error %d", -+ current->pid, name, (int)PTR_ERR(ubi)); - return ERR_CAST(ubi); - } - diff --git a/target/linux/generic/pending-4.4/047-ubifs-silence-early-error-if-MS_SILENT-is-set.patch b/target/linux/generic/pending-4.4/047-ubifs-silence-early-error-if-MS_SILENT-is-set.patch deleted file mode 100644 index 189b96c41c..0000000000 --- a/target/linux/generic/pending-4.4/047-ubifs-silence-early-error-if-MS_SILENT-is-set.patch +++ /dev/null @@ -1,54 +0,0 @@ -From dccbc9197d2c3614f2fd6811874e1d982e4415f0 Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Tue, 19 Jul 2016 00:26:55 +0200 -Subject: [PATCH] ubifs: Silence early error messages if MS_SILENT is set - -Probe-mounting a volume too small for UBIFS results in kernel log -polution which might irritate users. -Address this by silencing errors which may happen during boot if the -rootfs is e.g. squashfs (and thus rather small) stored on a UBI volume. - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - fs/ubifs/super.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - ---- a/fs/ubifs/super.c -+++ b/fs/ubifs/super.c -@@ -520,19 +520,19 @@ static int init_constants_early(struct u - c->max_write_shift = fls(c->max_write_size) - 1; - - if (c->leb_size < UBIFS_MIN_LEB_SZ) { -- ubifs_err(c, "too small LEBs (%d bytes), min. is %d bytes", -- c->leb_size, UBIFS_MIN_LEB_SZ); -+ ubifs_errc(c, "too small LEBs (%d bytes), min. is %d bytes", -+ c->leb_size, UBIFS_MIN_LEB_SZ); - return -EINVAL; - } - - if (c->leb_cnt < UBIFS_MIN_LEB_CNT) { -- ubifs_err(c, "too few LEBs (%d), min. is %d", -- c->leb_cnt, UBIFS_MIN_LEB_CNT); -+ ubifs_errc(c, "too few LEBs (%d), min. is %d", -+ c->leb_cnt, UBIFS_MIN_LEB_CNT); - return -EINVAL; - } - - if (!is_power_of_2(c->min_io_size)) { -- ubifs_err(c, "bad min. I/O size %d", c->min_io_size); -+ ubifs_errc(c, "bad min. I/O size %d", c->min_io_size); - return -EINVAL; - } - -@@ -543,8 +543,8 @@ static int init_constants_early(struct u - if (c->max_write_size < c->min_io_size || - c->max_write_size % c->min_io_size || - !is_power_of_2(c->max_write_size)) { -- ubifs_err(c, "bad write buffer size %d for %d min. I/O unit", -- c->max_write_size, c->min_io_size); -+ ubifs_errc(c, "bad write buffer size %d for %d min. I/O unit", -+ c->max_write_size, c->min_io_size); - return -EINVAL; - } - diff --git a/target/linux/generic/pending-4.4/048-mtd-spi-nor-backport-SPI_NOR_HAS_LOCK-flag.patch b/target/linux/generic/pending-4.4/048-mtd-spi-nor-backport-SPI_NOR_HAS_LOCK-flag.patch deleted file mode 100644 index 69a5432fa7..0000000000 --- a/target/linux/generic/pending-4.4/048-mtd-spi-nor-backport-SPI_NOR_HAS_LOCK-flag.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 76a4707de5e18dc32d9cb4e990686140c5664a15 Mon Sep 17 00:00:00 2001 -From: Brian Norris <computersforpeace@gmail.com> -Date: Fri, 29 Jan 2016 11:25:35 -0800 -Subject: [PATCH] mtd: spi-nor: add SPI_NOR_HAS_LOCK flag - -We can't determine this purely by manufacturer type (see commit -67b9bcd36906 ("mtd: spi-nor: fix Spansion regressions (aliased with -Winbond)")), and it's not autodetectable by anything like SFDP. So make -a new flag for it. - -Signed-off-by: Brian Norris <computersforpeace@gmail.com> -Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> -Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> ---- - drivers/mtd/spi-nor/spi-nor.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -68,6 +68,7 @@ struct flash_info { - #define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ - #define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ - #define USE_FSR 0x80 /* use flag status register */ -+#define SPI_NOR_HAS_LOCK 0x100 /* Flash supports lock/unlock via SR */ - }; - - #define JEDEC_MFR(info) ((info)->id[0]) -@@ -1163,7 +1164,8 @@ int spi_nor_scan(struct spi_nor *nor, co - - if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || - JEDEC_MFR(info) == SNOR_MFR_INTEL || -- JEDEC_MFR(info) == SNOR_MFR_SST) { -+ JEDEC_MFR(info) == SNOR_MFR_SST || -+ info->flags & SPI_NOR_HAS_LOCK) { - write_enable(nor); - write_sr(nor, 0); - } -@@ -1179,7 +1181,8 @@ int spi_nor_scan(struct spi_nor *nor, co - mtd->_read = spi_nor_read; - - /* NOR protection support for STmicro/Micron chips and similar */ -- if (JEDEC_MFR(info) == SNOR_MFR_MICRON) { -+ if (JEDEC_MFR(info) == SNOR_MFR_MICRON || -+ info->flags & SPI_NOR_HAS_LOCK) { - nor->flash_lock = stm_lock; - nor->flash_unlock = stm_unlock; - nor->flash_is_locked = stm_is_locked; diff --git a/target/linux/generic/pending-4.4/050-backport_netfilter_rtcache.patch b/target/linux/generic/pending-4.4/050-backport_netfilter_rtcache.patch deleted file mode 100644 index ddf5ba96b6..0000000000 --- a/target/linux/generic/pending-4.4/050-backport_netfilter_rtcache.patch +++ /dev/null @@ -1,531 +0,0 @@ -Subject: netfilter: conntrack: cache route for forwarded connections - -... to avoid per-packet FIB lookup if possible. - -The cached dst is re-used provided the input interface -is the same as that of the previous packet in the same direction. - -If not, the cached dst is invalidated. - -For ipv6 we also need to store sernum, else dst_check doesn't work, -pointed out by Eric Dumazet. - -This should speed up forwarding when conntrack is already in use -anyway, especially when using reverse path filtering -- active RPF -enforces two FIB lookups for each packet. - -Before the routing cache removal this didn't matter since RPF was performed -only when route cache didn't yield a result; but without route cache it -comes at higher price. - -Julian Anastasov suggested to add NETDEV_UNREGISTER handler to -avoid holding on to dsts of 'frozen' conntracks. - -Signed-off-by: Florian Westphal <fw@strlen.de> - ---- a/include/net/netfilter/nf_conntrack_extend.h -+++ b/include/net/netfilter/nf_conntrack_extend.h -@@ -30,6 +30,9 @@ enum nf_ct_ext_id { - #if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY) - NF_CT_EXT_SYNPROXY, - #endif -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE) -+ NF_CT_EXT_RTCACHE, -+#endif - NF_CT_EXT_NUM, - }; - -@@ -43,6 +46,7 @@ enum nf_ct_ext_id { - #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout - #define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels - #define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy -+#define NF_CT_EXT_RTCACHE_TYPE struct nf_conn_rtcache - - /* Extensions: optional stuff which isn't permanently in struct. */ - struct nf_ct_ext { ---- /dev/null -+++ b/include/net/netfilter/nf_conntrack_rtcache.h -@@ -0,0 +1,34 @@ -+#include <linux/gfp.h> -+#include <net/netfilter/nf_conntrack.h> -+#include <net/netfilter/nf_conntrack_extend.h> -+ -+struct dst_entry; -+ -+struct nf_conn_dst_cache { -+ struct dst_entry *dst; -+ int iif; -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6) -+ u32 cookie; -+#endif -+ -+}; -+ -+struct nf_conn_rtcache { -+ struct nf_conn_dst_cache cached_dst[IP_CT_DIR_MAX]; -+}; -+ -+static inline -+struct nf_conn_rtcache *nf_ct_rtcache_find(const struct nf_conn *ct) -+{ -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE) -+ return nf_ct_ext_find(ct, NF_CT_EXT_RTCACHE); -+#else -+ return NULL; -+#endif -+} -+ -+static inline int nf_conn_rtcache_iif_get(const struct nf_conn_rtcache *rtc, -+ enum ip_conntrack_dir dir) -+{ -+ return rtc->cached_dst[dir].iif; -+} ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -114,6 +114,18 @@ config NF_CONNTRACK_EVENTS - - If unsure, say `N'. - -+config NF_CONNTRACK_RTCACHE -+ tristate "Cache route entries in conntrack objects" -+ depends on NETFILTER_ADVANCED -+ depends on NF_CONNTRACK -+ help -+ If this option is enabled, the connection tracking code will -+ cache routing information for each connection that is being -+ forwarded, at a cost of 32 bytes per conntrack object. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ The module will be called nf_conntrack_rtcache. -+ - config NF_CONNTRACK_TIMEOUT - bool 'Connection tracking timeout' - depends on NETFILTER_ADVANCED ---- a/net/netfilter/Makefile -+++ b/net/netfilter/Makefile -@@ -16,6 +16,9 @@ obj-$(CONFIG_NETFILTER_NETLINK_LOG) += n - # connection tracking - obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o - -+# optional conntrack route cache extension -+obj-$(CONFIG_NF_CONNTRACK_RTCACHE) += nf_conntrack_rtcache.o -+ - # SCTP protocol connection tracking - obj-$(CONFIG_NF_CT_PROTO_DCCP) += nf_conntrack_proto_dccp.o - obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o ---- /dev/null -+++ b/net/netfilter/nf_conntrack_rtcache.c -@@ -0,0 +1,413 @@ -+/* route cache for netfilter. -+ * -+ * (C) 2014 Red Hat GmbH -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include <linux/types.h> -+#include <linux/netfilter.h> -+#include <linux/skbuff.h> -+#include <linux/stddef.h> -+#include <linux/kernel.h> -+#include <linux/netdevice.h> -+#include <linux/export.h> -+#include <linux/module.h> -+ -+#include <net/dst.h> -+ -+#include <net/netfilter/nf_conntrack.h> -+#include <net/netfilter/nf_conntrack_core.h> -+#include <net/netfilter/nf_conntrack_extend.h> -+#include <net/netfilter/nf_conntrack_rtcache.h> -+ -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6) -+#include <net/ip6_fib.h> -+#endif -+ -+static void __nf_conn_rtcache_destroy(struct nf_conn_rtcache *rtc, -+ enum ip_conntrack_dir dir) -+{ -+ struct dst_entry *dst = rtc->cached_dst[dir].dst; -+ -+ dst_release(dst); -+} -+ -+static void nf_conn_rtcache_destroy(struct nf_conn *ct) -+{ -+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct); -+ -+ if (!rtc) -+ return; -+ -+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_ORIGINAL); -+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_REPLY); -+} -+ -+static void nf_ct_rtcache_ext_add(struct nf_conn *ct) -+{ -+ struct nf_conn_rtcache *rtc; -+ -+ rtc = nf_ct_ext_add(ct, NF_CT_EXT_RTCACHE, GFP_ATOMIC); -+ if (rtc) { -+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif = -1; -+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].dst = NULL; -+ rtc->cached_dst[IP_CT_DIR_REPLY].iif = -1; -+ rtc->cached_dst[IP_CT_DIR_REPLY].dst = NULL; -+ } -+} -+ -+static struct nf_conn_rtcache *nf_ct_rtcache_find_usable(struct nf_conn *ct) -+{ -+ if (nf_ct_is_untracked(ct)) -+ return NULL; -+ return nf_ct_rtcache_find(ct); -+} -+ -+static struct dst_entry * -+nf_conn_rtcache_dst_get(const struct nf_conn_rtcache *rtc, -+ enum ip_conntrack_dir dir) -+{ -+ return rtc->cached_dst[dir].dst; -+} -+ -+static u32 nf_rtcache_get_cookie(int pf, const struct dst_entry *dst) -+{ -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6) -+ if (pf == NFPROTO_IPV6) { -+ const struct rt6_info *rt = (const struct rt6_info *)dst; -+ -+ if (rt->rt6i_node) -+ return (u32)rt->rt6i_node->fn_sernum; -+ } -+#endif -+ return 0; -+} -+ -+static void nf_conn_rtcache_dst_set(int pf, -+ struct nf_conn_rtcache *rtc, -+ struct dst_entry *dst, -+ enum ip_conntrack_dir dir, int iif) -+{ -+ if (rtc->cached_dst[dir].iif != iif) -+ rtc->cached_dst[dir].iif = iif; -+ -+ if (rtc->cached_dst[dir].dst != dst) { -+ struct dst_entry *old; -+ -+ dst_hold(dst); -+ -+ old = xchg(&rtc->cached_dst[dir].dst, dst); -+ dst_release(old); -+ -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6) -+ if (pf == NFPROTO_IPV6) -+ rtc->cached_dst[dir].cookie = -+ nf_rtcache_get_cookie(pf, dst); -+#endif -+ } -+} -+ -+static void nf_conn_rtcache_dst_obsolete(struct nf_conn_rtcache *rtc, -+ enum ip_conntrack_dir dir) -+{ -+ struct dst_entry *old; -+ -+ pr_debug("Invalidate iif %d for dir %d on cache %p\n", -+ rtc->cached_dst[dir].iif, dir, rtc); -+ -+ old = xchg(&rtc->cached_dst[dir].dst, NULL); -+ dst_release(old); -+ rtc->cached_dst[dir].iif = -1; -+} -+ -+static unsigned int nf_rtcache_in(u_int8_t pf, -+ struct sk_buff *skb, -+ const struct nf_hook_state *state) -+{ -+ struct nf_conn_rtcache *rtc; -+ enum ip_conntrack_info ctinfo; -+ enum ip_conntrack_dir dir; -+ struct dst_entry *dst; -+ struct nf_conn *ct; -+ int iif; -+ u32 cookie; -+ -+ if (skb_dst(skb) || skb->sk) -+ return NF_ACCEPT; -+ -+ ct = nf_ct_get(skb, &ctinfo); -+ if (!ct) -+ return NF_ACCEPT; -+ -+ rtc = nf_ct_rtcache_find_usable(ct); -+ if (!rtc) -+ return NF_ACCEPT; -+ -+ /* if iif changes, don't use cache and let ip stack -+ * do route lookup. -+ * -+ * If rp_filter is enabled it might toss skb, so -+ * we don't want to avoid these checks. -+ */ -+ dir = CTINFO2DIR(ctinfo); -+ iif = nf_conn_rtcache_iif_get(rtc, dir); -+ if (state->in->ifindex != iif) { -+ pr_debug("ct %p, iif %d, cached iif %d, skip cached entry\n", -+ ct, iif, state->in->ifindex); -+ return NF_ACCEPT; -+ } -+ dst = nf_conn_rtcache_dst_get(rtc, dir); -+ if (dst == NULL) -+ return NF_ACCEPT; -+ -+ cookie = nf_rtcache_get_cookie(pf, dst); -+ -+ dst = dst_check(dst, cookie); -+ pr_debug("obtained dst %p for skb %p, cookie %d\n", dst, skb, cookie); -+ if (likely(dst)) -+ skb_dst_set_noref(skb, dst); -+ else -+ nf_conn_rtcache_dst_obsolete(rtc, dir); -+ -+ return NF_ACCEPT; -+} -+ -+static unsigned int nf_rtcache_forward(u_int8_t pf, -+ struct sk_buff *skb, -+ const struct nf_hook_state *state) -+{ -+ struct nf_conn_rtcache *rtc; -+ enum ip_conntrack_info ctinfo; -+ enum ip_conntrack_dir dir; -+ struct nf_conn *ct; -+ struct dst_entry *dst = skb_dst(skb); -+ int iif; -+ -+ ct = nf_ct_get(skb, &ctinfo); -+ if (!ct) -+ return NF_ACCEPT; -+ -+ if (dst && dst_xfrm(dst)) -+ return NF_ACCEPT; -+ -+ if (!nf_ct_is_confirmed(ct)) { -+ if (WARN_ON(nf_ct_rtcache_find(ct))) -+ return NF_ACCEPT; -+ nf_ct_rtcache_ext_add(ct); -+ return NF_ACCEPT; -+ } -+ -+ rtc = nf_ct_rtcache_find_usable(ct); -+ if (!rtc) -+ return NF_ACCEPT; -+ -+ dir = CTINFO2DIR(ctinfo); -+ iif = nf_conn_rtcache_iif_get(rtc, dir); -+ pr_debug("ct %p, skb %p, dir %d, iif %d, cached iif %d\n", -+ ct, skb, dir, iif, state->in->ifindex); -+ if (likely(state->in->ifindex == iif)) -+ return NF_ACCEPT; -+ -+ nf_conn_rtcache_dst_set(pf, rtc, skb_dst(skb), dir, state->in->ifindex); -+ return NF_ACCEPT; -+} -+ -+static unsigned int nf_rtcache_in4(void *priv, -+ struct sk_buff *skb, -+ const struct nf_hook_state *state) -+{ -+ return nf_rtcache_in(NFPROTO_IPV4, skb, state); -+} -+ -+static unsigned int nf_rtcache_forward4(void *priv, -+ struct sk_buff *skb, -+ const struct nf_hook_state *state) -+{ -+ return nf_rtcache_forward(NFPROTO_IPV4, skb, state); -+} -+ -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6) -+static unsigned int nf_rtcache_in6(void *priv, -+ struct sk_buff *skb, -+ const struct nf_hook_state *state) -+{ -+ return nf_rtcache_in(NFPROTO_IPV6, skb, state); -+} -+ -+static unsigned int nf_rtcache_forward6(void *priv, -+ struct sk_buff *skb, -+ const struct nf_hook_state *state) -+{ -+ return nf_rtcache_forward(NFPROTO_IPV6, skb, state); -+} -+#endif -+ -+static int nf_rtcache_dst_remove(struct nf_conn *ct, void *data) -+{ -+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct); -+ struct net_device *dev = data; -+ -+ if (!rtc) -+ return 0; -+ -+ if (dev->ifindex == rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif || -+ dev->ifindex == rtc->cached_dst[IP_CT_DIR_REPLY].iif) { -+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_ORIGINAL); -+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_REPLY); -+ } -+ -+ return 0; -+} -+ -+static int nf_rtcache_netdev_event(struct notifier_block *this, -+ unsigned long event, void *ptr) -+{ -+ struct net_device *dev = netdev_notifier_info_to_dev(ptr); -+ struct net *net = dev_net(dev); -+ -+ if (event == NETDEV_DOWN) -+ nf_ct_iterate_cleanup(net, nf_rtcache_dst_remove, dev, 0, 0); -+ -+ return NOTIFY_DONE; -+} -+ -+static struct notifier_block nf_rtcache_notifier = { -+ .notifier_call = nf_rtcache_netdev_event, -+}; -+ -+static struct nf_hook_ops rtcache_ops[] = { -+ { -+ .hook = nf_rtcache_in4, -+ .pf = NFPROTO_IPV4, -+ .hooknum = NF_INET_PRE_ROUTING, -+ .priority = NF_IP_PRI_LAST, -+ }, -+ { -+ .hook = nf_rtcache_forward4, -+ .pf = NFPROTO_IPV4, -+ .hooknum = NF_INET_FORWARD, -+ .priority = NF_IP_PRI_LAST, -+ }, -+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6) -+ { -+ .hook = nf_rtcache_in6, -+ .pf = NFPROTO_IPV6, -+ .hooknum = NF_INET_PRE_ROUTING, -+ .priority = NF_IP_PRI_LAST, -+ }, -+ { -+ .hook = nf_rtcache_forward6, -+ .pf = NFPROTO_IPV6, -+ .hooknum = NF_INET_FORWARD, -+ .priority = NF_IP_PRI_LAST, -+ }, -+#endif -+}; -+ -+static struct nf_ct_ext_type rtcache_extend __read_mostly = { -+ .len = sizeof(struct nf_conn_rtcache), -+ .align = __alignof__(struct nf_conn_rtcache), -+ .id = NF_CT_EXT_RTCACHE, -+ .destroy = nf_conn_rtcache_destroy, -+}; -+ -+static int __init nf_conntrack_rtcache_init(void) -+{ -+ int ret = nf_ct_extend_register(&rtcache_extend); -+ -+ if (ret < 0) { -+ pr_err("nf_conntrack_rtcache: Unable to register extension\n"); -+ return ret; -+ } -+ -+ ret = nf_register_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops)); -+ if (ret < 0) { -+ nf_ct_extend_unregister(&rtcache_extend); -+ return ret; -+ } -+ -+ ret = register_netdevice_notifier(&nf_rtcache_notifier); -+ if (ret) { -+ nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops)); -+ nf_ct_extend_unregister(&rtcache_extend); -+ } -+ -+ return ret; -+} -+ -+static int nf_rtcache_ext_remove(struct nf_conn *ct, void *data) -+{ -+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct); -+ -+ return rtc != NULL; -+} -+ -+static bool __exit nf_conntrack_rtcache_wait_for_dying(struct net *net) -+{ -+ bool wait = false; -+ int cpu; -+ -+ for_each_possible_cpu(cpu) { -+ struct nf_conntrack_tuple_hash *h; -+ struct hlist_nulls_node *n; -+ struct nf_conn *ct; -+ struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu); -+ -+ rcu_read_lock(); -+ spin_lock_bh(&pcpu->lock); -+ -+ hlist_nulls_for_each_entry(h, n, &pcpu->dying, hnnode) { -+ ct = nf_ct_tuplehash_to_ctrack(h); -+ if (nf_ct_rtcache_find(ct) != NULL) { -+ wait = true; -+ break; -+ } -+ } -+ spin_unlock_bh(&pcpu->lock); -+ rcu_read_unlock(); -+ } -+ -+ return wait; -+} -+ -+static void __exit nf_conntrack_rtcache_fini(void) -+{ -+ struct net *net; -+ int count = 0; -+ -+ /* remove hooks so no new connections get rtcache extension */ -+ nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops)); -+ -+ synchronize_net(); -+ -+ unregister_netdevice_notifier(&nf_rtcache_notifier); -+ -+ rtnl_lock(); -+ -+ /* zap all conntracks with rtcache extension */ -+ for_each_net(net) -+ nf_ct_iterate_cleanup(net, nf_rtcache_ext_remove, NULL, 0, 0); -+ -+ for_each_net(net) { -+ /* .. and make sure they're gone from dying list, too */ -+ while (nf_conntrack_rtcache_wait_for_dying(net)) { -+ msleep(200); -+ WARN_ONCE(++count > 25, "Waiting for all rtcache conntracks to go away\n"); -+ } -+ } -+ -+ rtnl_unlock(); -+ synchronize_net(); -+ nf_ct_extend_unregister(&rtcache_extend); -+} -+module_init(nf_conntrack_rtcache_init); -+module_exit(nf_conntrack_rtcache_fini); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Florian Westphal <fw@strlen.de>"); -+MODULE_DESCRIPTION("Conntrack route cache extension"); diff --git a/target/linux/generic/pending-4.4/051-0001-ovl-rename-is_merge-to-is_lowest.patch b/target/linux/generic/pending-4.4/051-0001-ovl-rename-is_merge-to-is_lowest.patch deleted file mode 100644 index 79140b9008..0000000000 --- a/target/linux/generic/pending-4.4/051-0001-ovl-rename-is_merge-to-is_lowest.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 56656e960b555cb98bc414382566dcb59aae99a2 Mon Sep 17 00:00:00 2001 -From: Miklos Szeredi <mszeredi@redhat.com> -Date: Mon, 21 Mar 2016 17:31:46 +0100 -Subject: [PATCH] ovl: rename is_merge to is_lowest - -The 'is_merge' is an historical naming from when only a single lower layer -could exist. With the introduction of multiple lower layers the meaning of -this flag was changed to mean only the "lowest layer" (while all lower -layers were being merged). - -So now 'is_merge' is inaccurate and hence renaming to 'is_lowest' - -Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> ---- - fs/overlayfs/readdir.c | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/fs/overlayfs/readdir.c -+++ b/fs/overlayfs/readdir.c -@@ -36,7 +36,7 @@ struct ovl_dir_cache { - - struct ovl_readdir_data { - struct dir_context ctx; -- bool is_merge; -+ bool is_lowest; - struct rb_root root; - struct list_head *list; - struct list_head middle; -@@ -139,9 +139,9 @@ static int ovl_cache_entry_add_rb(struct - return 0; - } - --static int ovl_fill_lower(struct ovl_readdir_data *rdd, -- const char *name, int namelen, -- loff_t offset, u64 ino, unsigned int d_type) -+static int ovl_fill_lowest(struct ovl_readdir_data *rdd, -+ const char *name, int namelen, -+ loff_t offset, u64 ino, unsigned int d_type) - { - struct ovl_cache_entry *p; - -@@ -193,10 +193,10 @@ static int ovl_fill_merge(struct dir_con - container_of(ctx, struct ovl_readdir_data, ctx); - - rdd->count++; -- if (!rdd->is_merge) -+ if (!rdd->is_lowest) - return ovl_cache_entry_add_rb(rdd, name, namelen, ino, d_type); - else -- return ovl_fill_lower(rdd, name, namelen, offset, ino, d_type); -+ return ovl_fill_lowest(rdd, name, namelen, offset, ino, d_type); - } - - static int ovl_check_whiteouts(struct dentry *dir, struct ovl_readdir_data *rdd) -@@ -289,7 +289,7 @@ static int ovl_dir_read_merged(struct de - .ctx.actor = ovl_fill_merge, - .list = list, - .root = RB_ROOT, -- .is_merge = false, -+ .is_lowest = false, - }; - int idx, next; - -@@ -306,7 +306,7 @@ static int ovl_dir_read_merged(struct de - * allows offsets to be reasonably constant - */ - list_add(&rdd.middle, rdd.list); -- rdd.is_merge = true; -+ rdd.is_lowest = true; - err = ovl_dir_read(&realpath, &rdd); - list_del(&rdd.middle); - } diff --git a/target/linux/generic/pending-4.4/051-0002-ovl-override-creds-with-the-ones-from-the-superblock.patch b/target/linux/generic/pending-4.4/051-0002-ovl-override-creds-with-the-ones-from-the-superblock.patch deleted file mode 100644 index 208bc61ec5..0000000000 --- a/target/linux/generic/pending-4.4/051-0002-ovl-override-creds-with-the-ones-from-the-superblock.patch +++ /dev/null @@ -1,336 +0,0 @@ -From 3fe6e52f062643676eb4518d68cee3bc1272091b Mon Sep 17 00:00:00 2001 -From: Antonio Murdaca <amurdaca@redhat.com> -Date: Thu, 7 Apr 2016 15:48:25 +0200 -Subject: [PATCH] ovl: override creds with the ones from the superblock mounter - -In user namespace the whiteout creation fails with -EPERM because the -current process isn't capable(CAP_SYS_ADMIN) when setting xattr. - -A simple reproducer: - -$ mkdir upper lower work merged lower/dir -$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged -$ unshare -m -p -f -U -r bash - -Now as root in the user namespace: - -\# touch merged/dir/{1,2,3} # this will force a copy up of lower/dir -\# rm -fR merged/* - -This ends up failing with -EPERM after the files in dir has been -correctly deleted: - -unlinkat(4, "2", 0) = 0 -unlinkat(4, "1", 0) = 0 -unlinkat(4, "3", 0) = 0 -close(4) = 0 -unlinkat(AT_FDCWD, "merged/dir", AT_REMOVEDIR) = -1 EPERM (Operation not -permitted) - -Interestingly, if you don't place files in merged/dir you can remove it, -meaning if upper/dir does not exist, creating the char device file works -properly in that same location. - -This patch uses ovl_sb_creator_cred() to get the cred struct from the -superblock mounter and override the old cred with these new ones so that -the whiteout creation is possible because overlay is wrong in assuming that -the creds it will get with prepare_creds will be in the initial user -namespace. The old cap_raise game is removed in favor of just overriding -the old cred struct. - -This patch also drops from ovl_copy_up_one() the following two lines: - -override_cred->fsuid = stat->uid; -override_cred->fsgid = stat->gid; - -This is because the correct uid and gid are taken directly with the stat -struct and correctly set with ovl_set_attr(). - -Signed-off-by: Antonio Murdaca <runcom@redhat.com> -Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> ---- - fs/overlayfs/copy_up.c | 26 +------------------ - fs/overlayfs/dir.c | 67 ++++-------------------------------------------- - fs/overlayfs/overlayfs.h | 1 + - fs/overlayfs/readdir.c | 14 +++------- - fs/overlayfs/super.c | 18 ++++++++++++- - 5 files changed, 27 insertions(+), 99 deletions(-) - ---- a/fs/overlayfs/copy_up.c -+++ b/fs/overlayfs/copy_up.c -@@ -317,7 +317,6 @@ int ovl_copy_up_one(struct dentry *paren - struct dentry *upperdir; - struct dentry *upperdentry; - const struct cred *old_cred; -- struct cred *override_cred; - char *link = NULL; - - if (WARN_ON(!workdir)) -@@ -336,28 +335,7 @@ int ovl_copy_up_one(struct dentry *paren - return PTR_ERR(link); - } - -- err = -ENOMEM; -- override_cred = prepare_creds(); -- if (!override_cred) -- goto out_free_link; -- -- override_cred->fsuid = stat->uid; -- override_cred->fsgid = stat->gid; -- /* -- * CAP_SYS_ADMIN for copying up extended attributes -- * CAP_DAC_OVERRIDE for create -- * CAP_FOWNER for chmod, timestamp update -- * CAP_FSETID for chmod -- * CAP_CHOWN for chown -- * CAP_MKNOD for mknod -- */ -- cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -- cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -- cap_raise(override_cred->cap_effective, CAP_FOWNER); -- cap_raise(override_cred->cap_effective, CAP_FSETID); -- cap_raise(override_cred->cap_effective, CAP_CHOWN); -- cap_raise(override_cred->cap_effective, CAP_MKNOD); -- old_cred = override_creds(override_cred); -+ old_cred = ovl_override_creds(dentry->d_sb); - - err = -EIO; - if (lock_rename(workdir, upperdir) != NULL) { -@@ -380,9 +358,7 @@ int ovl_copy_up_one(struct dentry *paren - out_unlock: - unlock_rename(workdir, upperdir); - revert_creds(old_cred); -- put_cred(override_cred); - --out_free_link: - if (link) - free_page((unsigned long) link); - ---- a/fs/overlayfs/dir.c -+++ b/fs/overlayfs/dir.c -@@ -408,28 +408,13 @@ static int ovl_create_or_link(struct den - err = ovl_create_upper(dentry, inode, &stat, link, hardlink); - } else { - const struct cred *old_cred; -- struct cred *override_cred; - -- err = -ENOMEM; -- override_cred = prepare_creds(); -- if (!override_cred) -- goto out_iput; -- -- /* -- * CAP_SYS_ADMIN for setting opaque xattr -- * CAP_DAC_OVERRIDE for create in workdir, rename -- * CAP_FOWNER for removing whiteout from sticky dir -- */ -- cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -- cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -- cap_raise(override_cred->cap_effective, CAP_FOWNER); -- old_cred = override_creds(override_cred); -+ old_cred = ovl_override_creds(dentry->d_sb); - - err = ovl_create_over_whiteout(dentry, inode, &stat, link, - hardlink); - - revert_creds(old_cred); -- put_cred(override_cred); - } - - if (!err) -@@ -659,32 +644,11 @@ static int ovl_do_remove(struct dentry * - if (OVL_TYPE_PURE_UPPER(type)) { - err = ovl_remove_upper(dentry, is_dir); - } else { -- const struct cred *old_cred; -- struct cred *override_cred; -- -- err = -ENOMEM; -- override_cred = prepare_creds(); -- if (!override_cred) -- goto out_drop_write; -- -- /* -- * CAP_SYS_ADMIN for setting xattr on whiteout, opaque dir -- * CAP_DAC_OVERRIDE for create in workdir, rename -- * CAP_FOWNER for removing whiteout from sticky dir -- * CAP_FSETID for chmod of opaque dir -- * CAP_CHOWN for chown of opaque dir -- */ -- cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -- cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -- cap_raise(override_cred->cap_effective, CAP_FOWNER); -- cap_raise(override_cred->cap_effective, CAP_FSETID); -- cap_raise(override_cred->cap_effective, CAP_CHOWN); -- old_cred = override_creds(override_cred); -+ const struct cred *old_cred = ovl_override_creds(dentry->d_sb); - - err = ovl_remove_and_whiteout(dentry, is_dir); - - revert_creds(old_cred); -- put_cred(override_cred); - } - out_drop_write: - ovl_drop_write(dentry); -@@ -723,7 +687,6 @@ static int ovl_rename2(struct inode *old - bool new_is_dir = false; - struct dentry *opaquedir = NULL; - const struct cred *old_cred = NULL; -- struct cred *override_cred = NULL; - - err = -EINVAL; - if (flags & ~(RENAME_EXCHANGE | RENAME_NOREPLACE)) -@@ -792,26 +755,8 @@ static int ovl_rename2(struct inode *old - old_opaque = !OVL_TYPE_PURE_UPPER(old_type); - new_opaque = !OVL_TYPE_PURE_UPPER(new_type); - -- if (old_opaque || new_opaque) { -- err = -ENOMEM; -- override_cred = prepare_creds(); -- if (!override_cred) -- goto out_drop_write; -- -- /* -- * CAP_SYS_ADMIN for setting xattr on whiteout, opaque dir -- * CAP_DAC_OVERRIDE for create in workdir -- * CAP_FOWNER for removing whiteout from sticky dir -- * CAP_FSETID for chmod of opaque dir -- * CAP_CHOWN for chown of opaque dir -- */ -- cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -- cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -- cap_raise(override_cred->cap_effective, CAP_FOWNER); -- cap_raise(override_cred->cap_effective, CAP_FSETID); -- cap_raise(override_cred->cap_effective, CAP_CHOWN); -- old_cred = override_creds(override_cred); -- } -+ if (old_opaque || new_opaque) -+ old_cred = ovl_override_creds(old->d_sb); - - if (overwrite && OVL_TYPE_MERGE_OR_LOWER(new_type) && new_is_dir) { - opaquedir = ovl_check_empty_and_clear(new); -@@ -942,10 +887,8 @@ out_dput_old: - out_unlock: - unlock_rename(new_upperdir, old_upperdir); - out_revert_creds: -- if (old_opaque || new_opaque) { -+ if (old_opaque || new_opaque) - revert_creds(old_cred); -- put_cred(override_cred); -- } - out_drop_write: - ovl_drop_write(old); - out: ---- a/fs/overlayfs/overlayfs.h -+++ b/fs/overlayfs/overlayfs.h -@@ -150,6 +150,7 @@ void ovl_drop_write(struct dentry *dentr - bool ovl_dentry_is_opaque(struct dentry *dentry); - void ovl_dentry_set_opaque(struct dentry *dentry, bool opaque); - bool ovl_is_whiteout(struct dentry *dentry); -+const struct cred *ovl_override_creds(struct super_block *sb); - void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry); - struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, - unsigned int flags); ---- a/fs/overlayfs/readdir.c -+++ b/fs/overlayfs/readdir.c -@@ -36,6 +36,7 @@ struct ovl_dir_cache { - - struct ovl_readdir_data { - struct dir_context ctx; -+ struct dentry *dentry; - bool is_lowest; - struct rb_root root; - struct list_head *list; -@@ -205,17 +206,8 @@ static int ovl_check_whiteouts(struct de - struct ovl_cache_entry *p; - struct dentry *dentry; - const struct cred *old_cred; -- struct cred *override_cred; -- -- override_cred = prepare_creds(); -- if (!override_cred) -- return -ENOMEM; - -- /* -- * CAP_DAC_OVERRIDE for lookup -- */ -- cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -- old_cred = override_creds(override_cred); -+ old_cred = ovl_override_creds(rdd->dentry->d_sb); - - err = mutex_lock_killable(&dir->d_inode->i_mutex); - if (!err) { -@@ -231,7 +223,6 @@ static int ovl_check_whiteouts(struct de - mutex_unlock(&dir->d_inode->i_mutex); - } - revert_creds(old_cred); -- put_cred(override_cred); - - return err; - } -@@ -287,6 +278,7 @@ static int ovl_dir_read_merged(struct de - struct path realpath; - struct ovl_readdir_data rdd = { - .ctx.actor = ovl_fill_merge, -+ .dentry = dentry, - .list = list, - .root = RB_ROOT, - .is_lowest = false, ---- a/fs/overlayfs/super.c -+++ b/fs/overlayfs/super.c -@@ -42,6 +42,8 @@ struct ovl_fs { - long lower_namelen; - /* pathnames of lower and upper dirs, for show_options */ - struct ovl_config config; -+ /* creds of process who forced instantiation of super block */ -+ const struct cred *creator_cred; - }; - - struct ovl_dir_cache; -@@ -246,6 +248,13 @@ bool ovl_is_whiteout(struct dentry *dent - return inode && IS_WHITEOUT(inode); - } - -+const struct cred *ovl_override_creds(struct super_block *sb) -+{ -+ struct ovl_fs *ofs = sb->s_fs_info; -+ -+ return override_creds(ofs->creator_cred); -+} -+ - static bool ovl_is_opaquedir(struct dentry *dentry) - { - int res; -@@ -587,6 +596,7 @@ static void ovl_put_super(struct super_b - kfree(ufs->config.lowerdir); - kfree(ufs->config.upperdir); - kfree(ufs->config.workdir); -+ put_cred(ufs->creator_cred); - kfree(ufs); - } - -@@ -1087,10 +1097,14 @@ static int ovl_fill_super(struct super_b - else - sb->s_d_op = &ovl_dentry_operations; - -+ ufs->creator_cred = prepare_creds(); -+ if (!ufs->creator_cred) -+ goto out_put_lower_mnt; -+ - err = -ENOMEM; - oe = ovl_alloc_entry(numlower); - if (!oe) -- goto out_put_lower_mnt; -+ goto out_put_cred; - - root_dentry = d_make_root(ovl_new_inode(sb, S_IFDIR, oe)); - if (!root_dentry) -@@ -1123,6 +1137,8 @@ static int ovl_fill_super(struct super_b - - out_free_oe: - kfree(oe); -+out_put_cred: -+ put_cred(ufs->creator_cred); - out_put_lower_mnt: - for (i = 0; i < ufs->numlower; i++) - mntput(ufs->lower_mnt[i]); diff --git a/target/linux/generic/pending-4.4/051-0005-ovl-proper-cleanup-of-workdir.patch b/target/linux/generic/pending-4.4/051-0005-ovl-proper-cleanup-of-workdir.patch deleted file mode 100644 index 7225fc8cd9..0000000000 --- a/target/linux/generic/pending-4.4/051-0005-ovl-proper-cleanup-of-workdir.patch +++ /dev/null @@ -1,131 +0,0 @@ -From eea2fb4851e9dcbab6b991aaf47e2e024f1f55a0 Mon Sep 17 00:00:00 2001 -From: Miklos Szeredi <mszeredi@redhat.com> -Date: Thu, 1 Sep 2016 11:11:59 +0200 -Subject: [PATCH] ovl: proper cleanup of workdir - -When mounting overlayfs it needs a clean "work" directory under the -supplied workdir. - -Previously the mount code removed this directory if it already existed and -created a new one. If the removal failed (e.g. directory was not empty) -then it fell back to a read-only mount not using the workdir. - -While this has never been reported, it is possible to get a non-empty -"work" dir from a previous mount of overlayfs in case of crash in the -middle of an operation using the work directory. - -In this case the left over state should be discarded and the overlay -filesystem will be consistent, guaranteed by the atomicity of operations on -moving to/from the workdir to the upper layer. - -This patch implements cleaning out any files left in workdir. It is -implemented using real recursion for simplicity, but the depth is limited -to 2, because the worst case is that of a directory containing whiteouts -under "work". - -Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> -Cc: <stable@vger.kernel.org> ---- - fs/overlayfs/overlayfs.h | 2 ++ - fs/overlayfs/readdir.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++- - fs/overlayfs/super.c | 2 +- - 3 files changed, 65 insertions(+), 2 deletions(-) - ---- a/fs/overlayfs/overlayfs.h -+++ b/fs/overlayfs/overlayfs.h -@@ -164,6 +164,8 @@ extern const struct file_operations ovl_ - int ovl_check_empty_dir(struct dentry *dentry, struct list_head *list); - void ovl_cleanup_whiteouts(struct dentry *upper, struct list_head *list); - void ovl_cache_free(struct list_head *list); -+void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt, -+ struct dentry *dentry, int level); - - /* inode.c */ - int ovl_setattr(struct dentry *dentry, struct iattr *attr); ---- a/fs/overlayfs/readdir.c -+++ b/fs/overlayfs/readdir.c -@@ -247,7 +247,7 @@ static inline int ovl_dir_read(struct pa - err = rdd->err; - } while (!err && rdd->count); - -- if (!err && rdd->first_maybe_whiteout) -+ if (!err && rdd->first_maybe_whiteout && rdd->dentry) - err = ovl_check_whiteouts(realpath->dentry, rdd); - - fput(realfile); -@@ -573,3 +573,64 @@ void ovl_cleanup_whiteouts(struct dentry - } - mutex_unlock(&upper->d_inode->i_mutex); - } -+ -+static void ovl_workdir_cleanup_recurse(struct path *path, int level) -+{ -+ int err; -+ struct inode *dir = path->dentry->d_inode; -+ LIST_HEAD(list); -+ struct ovl_cache_entry *p; -+ struct ovl_readdir_data rdd = { -+ .ctx.actor = ovl_fill_merge, -+ .dentry = NULL, -+ .list = &list, -+ .root = RB_ROOT, -+ .is_lowest = false, -+ }; -+ -+ err = ovl_dir_read(path, &rdd); -+ if (err) -+ goto out; -+ -+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT); -+ list_for_each_entry(p, &list, l_node) { -+ struct dentry *dentry; -+ -+ if (p->name[0] == '.') { -+ if (p->len == 1) -+ continue; -+ if (p->len == 2 && p->name[1] == '.') -+ continue; -+ } -+ dentry = lookup_one_len(p->name, path->dentry, p->len); -+ if (IS_ERR(dentry)) -+ continue; -+ if (dentry->d_inode) -+ ovl_workdir_cleanup(dir, path->mnt, dentry, level); -+ dput(dentry); -+ } -+ mutex_unlock(&dir->i_mutex); -+out: -+ ovl_cache_free(&list); -+} -+ -+void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt, -+ struct dentry *dentry, int level) -+{ -+ int err; -+ -+ if (!d_is_dir(dentry) || level > 1) { -+ ovl_cleanup(dir, dentry); -+ return; -+ } -+ -+ err = ovl_do_rmdir(dir, dentry); -+ if (err) { -+ struct path path = { .mnt = mnt, .dentry = dentry }; -+ -+ mutex_unlock(&dir->i_mutex); -+ ovl_workdir_cleanup_recurse(&path, level + 1); -+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT); -+ ovl_cleanup(dir, dentry); -+ } -+} ---- a/fs/overlayfs/super.c -+++ b/fs/overlayfs/super.c -@@ -784,7 +784,7 @@ retry: - goto out_dput; - - retried = true; -- ovl_cleanup(dir, work); -+ ovl_workdir_cleanup(dir, mnt, work, 0); - dput(work); - goto retry; - } diff --git a/target/linux/generic/pending-4.4/052-01-ubifs-Implement-O_TMPFILE.patch b/target/linux/generic/pending-4.4/052-01-ubifs-Implement-O_TMPFILE.patch deleted file mode 100644 index 1c55a89acf..0000000000 --- a/target/linux/generic/pending-4.4/052-01-ubifs-Implement-O_TMPFILE.patch +++ /dev/null @@ -1,99 +0,0 @@ -From: Richard Weinberger <richard@nod.at> -Date: Tue, 13 Sep 2016 16:18:55 +0200 -Subject: [PATCH] ubifs: Implement O_TMPFILE - -This patchs adds O_TMPFILE support to UBIFS. -A temp file is a reference to an unlinked inode, a user -holding the reference can use it. As soon it is being closed -all data vanishes. - -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - ---- a/fs/ubifs/dir.c -+++ b/fs/ubifs/dir.c -@@ -301,6 +301,76 @@ out_budg: - return err; - } - -+static int ubifs_tmpfile(struct inode *dir, struct dentry *dentry, -+ umode_t mode) -+{ -+ struct inode *inode; -+ struct ubifs_info *c = dir->i_sb->s_fs_info; -+ struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1}; -+ struct ubifs_budget_req ino_req = { .dirtied_ino = 1 }; -+ struct ubifs_inode *ui, *dir_ui = ubifs_inode(dir); -+ int err, instantiated = 0; -+ -+ /* -+ * Budget request settings: new dirty inode, new direntry, -+ * budget for dirtied inode will be released via writeback. -+ */ -+ -+ dbg_gen("dent '%pd', mode %#hx in dir ino %lu", -+ dentry, mode, dir->i_ino); -+ -+ err = ubifs_budget_space(c, &req); -+ if (err) -+ return err; -+ -+ err = ubifs_budget_space(c, &ino_req); -+ if (err) { -+ ubifs_release_budget(c, &req); -+ return err; -+ } -+ -+ inode = ubifs_new_inode(c, dir, mode); -+ if (IS_ERR(inode)) { -+ err = PTR_ERR(inode); -+ goto out_budg; -+ } -+ ui = ubifs_inode(inode); -+ -+ err = ubifs_init_security(dir, inode, &dentry->d_name); -+ if (err) -+ goto out_inode; -+ -+ mutex_lock(&ui->ui_mutex); -+ insert_inode_hash(inode); -+ d_tmpfile(dentry, inode); -+ ubifs_assert(ui->dirty); -+ instantiated = 1; -+ mutex_unlock(&ui->ui_mutex); -+ -+ mutex_lock(&dir_ui->ui_mutex); -+ err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 1, 0); -+ if (err) -+ goto out_cancel; -+ mutex_unlock(&dir_ui->ui_mutex); -+ -+ ubifs_release_budget(c, &req); -+ -+ return 0; -+ -+out_cancel: -+ mutex_unlock(&dir_ui->ui_mutex); -+out_inode: -+ make_bad_inode(inode); -+ if (!instantiated) -+ iput(inode); -+out_budg: -+ ubifs_release_budget(c, &req); -+ if (!instantiated) -+ ubifs_release_budget(c, &ino_req); -+ ubifs_err(c, "cannot create temporary file, error %d", err); -+ return err; -+} -+ - /** - * vfs_dent_type - get VFS directory entry type. - * @type: UBIFS directory entry type -@@ -1195,6 +1265,7 @@ const struct inode_operations ubifs_dir_ - #ifdef CONFIG_UBIFS_ATIME_SUPPORT - .update_time = ubifs_update_time, - #endif -+ .tmpfile = ubifs_tmpfile, - }; - - const struct file_operations ubifs_dir_operations = { diff --git a/target/linux/generic/pending-4.4/052-02-ubifs-Implement-RENAME_WHITEOUT.patch b/target/linux/generic/pending-4.4/052-02-ubifs-Implement-RENAME_WHITEOUT.patch deleted file mode 100644 index c2ec904939..0000000000 --- a/target/linux/generic/pending-4.4/052-02-ubifs-Implement-RENAME_WHITEOUT.patch +++ /dev/null @@ -1,343 +0,0 @@ -From: Richard Weinberger <richard@nod.at> -Date: Tue, 13 Sep 2016 16:18:56 +0200 -Subject: [PATCH] ubifs: Implement RENAME_WHITEOUT - -Adds RENAME_WHITEOUT support to UBIFS, we implement -it in the same way as ext4 and xfs do. -For an overview of other ways to implement it please -refere to commit 7dcf5c3e4527 ("xfs: add RENAME_WHITEOUT support"). - -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - ---- a/fs/ubifs/dir.c -+++ b/fs/ubifs/dir.c -@@ -301,8 +301,8 @@ out_budg: - return err; - } - --static int ubifs_tmpfile(struct inode *dir, struct dentry *dentry, -- umode_t mode) -+static int do_tmpfile(struct inode *dir, struct dentry *dentry, -+ umode_t mode, struct inode **whiteout) - { - struct inode *inode; - struct ubifs_info *c = dir->i_sb->s_fs_info; -@@ -336,14 +336,27 @@ static int ubifs_tmpfile(struct inode *d - } - ui = ubifs_inode(inode); - -+ if (whiteout) { -+ init_special_inode(inode, inode->i_mode, WHITEOUT_DEV); -+ ubifs_assert(inode->i_op == &ubifs_file_inode_operations); -+ } -+ - err = ubifs_init_security(dir, inode, &dentry->d_name); - if (err) - goto out_inode; - - mutex_lock(&ui->ui_mutex); - insert_inode_hash(inode); -- d_tmpfile(dentry, inode); -+ -+ if (whiteout) { -+ mark_inode_dirty(inode); -+ drop_nlink(inode); -+ *whiteout = inode; -+ } else { -+ d_tmpfile(dentry, inode); -+ } - ubifs_assert(ui->dirty); -+ - instantiated = 1; - mutex_unlock(&ui->ui_mutex); - -@@ -371,6 +384,12 @@ out_budg: - return err; - } - -+static int ubifs_tmpfile(struct inode *dir, struct dentry *dentry, -+ umode_t mode) -+{ -+ return do_tmpfile(dir, dentry, mode, NULL); -+} -+ - /** - * vfs_dent_type - get VFS directory entry type. - * @type: UBIFS directory entry type -@@ -1003,37 +1022,43 @@ out_budg: - } - - /** -- * lock_3_inodes - a wrapper for locking three UBIFS inodes. -+ * lock_4_inodes - a wrapper for locking three UBIFS inodes. - * @inode1: first inode - * @inode2: second inode - * @inode3: third inode -+ * @inode4: fouth inode - * - * This function is used for 'ubifs_rename()' and @inode1 may be the same as -- * @inode2 whereas @inode3 may be %NULL. -+ * @inode2 whereas @inode3 and @inode4 may be %NULL. - * - * We do not implement any tricks to guarantee strict lock ordering, because - * VFS has already done it for us on the @i_mutex. So this is just a simple - * wrapper function. - */ --static void lock_3_inodes(struct inode *inode1, struct inode *inode2, -- struct inode *inode3) -+static void lock_4_inodes(struct inode *inode1, struct inode *inode2, -+ struct inode *inode3, struct inode *inode4) - { - mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1); - if (inode2 != inode1) - mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2); - if (inode3) - mutex_lock_nested(&ubifs_inode(inode3)->ui_mutex, WB_MUTEX_3); -+ if (inode4) -+ mutex_lock_nested(&ubifs_inode(inode4)->ui_mutex, WB_MUTEX_4); - } - - /** -- * unlock_3_inodes - a wrapper for unlocking three UBIFS inodes for rename. -+ * unlock_4_inodes - a wrapper for unlocking three UBIFS inodes for rename. - * @inode1: first inode - * @inode2: second inode - * @inode3: third inode -+ * @inode4: fouth inode - */ --static void unlock_3_inodes(struct inode *inode1, struct inode *inode2, -- struct inode *inode3) -+static void unlock_4_inodes(struct inode *inode1, struct inode *inode2, -+ struct inode *inode3, struct inode *inode4) - { -+ if (inode4) -+ mutex_unlock(&ubifs_inode(inode4)->ui_mutex); - if (inode3) - mutex_unlock(&ubifs_inode(inode3)->ui_mutex); - if (inode1 != inode2) -@@ -1042,12 +1067,15 @@ static void unlock_3_inodes(struct inode - } - - static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry, -- struct inode *new_dir, struct dentry *new_dentry) -+ struct inode *new_dir, struct dentry *new_dentry, -+ unsigned int flags) - { - struct ubifs_info *c = old_dir->i_sb->s_fs_info; - struct inode *old_inode = d_inode(old_dentry); - struct inode *new_inode = d_inode(new_dentry); -+ struct inode *whiteout = NULL; - struct ubifs_inode *old_inode_ui = ubifs_inode(old_inode); -+ struct ubifs_inode *whiteout_ui = NULL; - int err, release, sync = 0, move = (new_dir != old_dir); - int is_dir = S_ISDIR(old_inode->i_mode); - int unlink = !!new_inode; -@@ -1069,9 +1097,13 @@ static int ubifs_rename(struct inode *ol - * separately. - */ - -- dbg_gen("dent '%pd' ino %lu in dir ino %lu to dent '%pd' in dir ino %lu", -+ dbg_gen("dent '%pd' ino %lu in dir ino %lu to dent '%pd' in dir ino %lu flags 0x%x", - old_dentry, old_inode->i_ino, old_dir->i_ino, -- new_dentry, new_dir->i_ino); -+ new_dentry, new_dir->i_ino, flags); -+ -+ if (flags & ~(RENAME_NOREPLACE | RENAME_WHITEOUT)) -+ return -EINVAL; -+ - ubifs_assert(mutex_is_locked(&old_dir->i_mutex)); - ubifs_assert(mutex_is_locked(&new_dir->i_mutex)); - if (unlink) -@@ -1093,7 +1125,32 @@ static int ubifs_rename(struct inode *ol - return err; - } - -- lock_3_inodes(old_dir, new_dir, new_inode); -+ if (flags & RENAME_WHITEOUT) { -+ union ubifs_dev_desc *dev = NULL; -+ -+ dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS); -+ if (!dev) { -+ ubifs_release_budget(c, &req); -+ ubifs_release_budget(c, &ino_req); -+ return -ENOMEM; -+ } -+ -+ err = do_tmpfile(old_dir, old_dentry, S_IFCHR | WHITEOUT_MODE, &whiteout); -+ if (err) { -+ ubifs_release_budget(c, &req); -+ ubifs_release_budget(c, &ino_req); -+ kfree(dev); -+ return err; -+ } -+ -+ whiteout->i_state |= I_LINKABLE; -+ whiteout_ui = ubifs_inode(whiteout); -+ whiteout_ui->data = dev; -+ whiteout_ui->data_len = ubifs_encode_dev(dev, MKDEV(0, 0)); -+ ubifs_assert(!whiteout_ui->dirty); -+ } -+ -+ lock_4_inodes(old_dir, new_dir, new_inode, whiteout); - - /* - * Like most other Unix systems, set the @i_ctime for inodes on a -@@ -1163,12 +1220,34 @@ static int ubifs_rename(struct inode *ol - if (unlink && IS_SYNC(new_inode)) - sync = 1; - } -- err = ubifs_jnl_rename(c, old_dir, old_dentry, new_dir, new_dentry, -+ -+ if (whiteout) { -+ struct ubifs_budget_req wht_req = { .dirtied_ino = 1, -+ .dirtied_ino_d = \ -+ ALIGN(ubifs_inode(whiteout)->data_len, 8) }; -+ -+ err = ubifs_budget_space(c, &wht_req); -+ if (err) { -+ ubifs_release_budget(c, &req); -+ ubifs_release_budget(c, &ino_req); -+ kfree(whiteout_ui->data); -+ whiteout_ui->data_len = 0; -+ iput(whiteout); -+ return err; -+ } -+ -+ inc_nlink(whiteout); -+ mark_inode_dirty(whiteout); -+ whiteout->i_state &= ~I_LINKABLE; -+ iput(whiteout); -+ } -+ -+ err = ubifs_jnl_rename(c, old_dir, old_dentry, new_dir, new_dentry, whiteout, - sync); - if (err) - goto out_cancel; - -- unlock_3_inodes(old_dir, new_dir, new_inode); -+ unlock_4_inodes(old_dir, new_dir, new_inode, whiteout); - ubifs_release_budget(c, &req); - - mutex_lock(&old_inode_ui->ui_mutex); -@@ -1201,7 +1280,11 @@ out_cancel: - inc_nlink(old_dir); - } - } -- unlock_3_inodes(old_dir, new_dir, new_inode); -+ if (whiteout) { -+ drop_nlink(whiteout); -+ iput(whiteout); -+ } -+ unlock_4_inodes(old_dir, new_dir, new_inode, whiteout); - ubifs_release_budget(c, &ino_req); - ubifs_release_budget(c, &req); - return err; -@@ -1255,7 +1338,7 @@ const struct inode_operations ubifs_dir_ - .mkdir = ubifs_mkdir, - .rmdir = ubifs_rmdir, - .mknod = ubifs_mknod, -- .rename = ubifs_rename, -+ .rename2 = ubifs_rename, - .setattr = ubifs_setattr, - .getattr = ubifs_getattr, - .setxattr = ubifs_setxattr, ---- a/fs/ubifs/journal.c -+++ b/fs/ubifs/journal.c -@@ -917,14 +917,15 @@ int ubifs_jnl_delete_inode(struct ubifs_ - * @sync: non-zero if the write-buffer has to be synchronized - * - * This function implements the re-name operation which may involve writing up -- * to 3 inodes and 2 directory entries. It marks the written inodes as clean -+ * to 4 inodes and 2 directory entries. It marks the written inodes as clean - * and returns zero on success. In case of failure, a negative error code is - * returned. - */ - int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, - const struct dentry *old_dentry, - const struct inode *new_dir, -- const struct dentry *new_dentry, int sync) -+ const struct dentry *new_dentry, -+ const struct inode *whiteout, int sync) - { - void *p; - union ubifs_key key; -@@ -980,13 +981,19 @@ int ubifs_jnl_rename(struct ubifs_info * - zero_dent_node_unused(dent); - ubifs_prep_grp_node(c, dent, dlen1, 0); - -- /* Make deletion dent */ - dent2 = (void *)dent + aligned_dlen1; - dent2->ch.node_type = UBIFS_DENT_NODE; - dent_key_init_flash(c, &dent2->key, old_dir->i_ino, - &old_dentry->d_name); -- dent2->inum = 0; -- dent2->type = DT_UNKNOWN; -+ -+ if (whiteout) { -+ dent2->inum = cpu_to_le64(whiteout->i_ino); -+ dent2->type = get_dent_type(whiteout->i_mode); -+ } else { -+ /* Make deletion dent */ -+ dent2->inum = 0; -+ dent2->type = DT_UNKNOWN; -+ } - dent2->nlen = cpu_to_le16(old_dentry->d_name.len); - memcpy(dent2->name, old_dentry->d_name.name, old_dentry->d_name.len); - dent2->name[old_dentry->d_name.len] = '\0'; -@@ -1035,16 +1042,26 @@ int ubifs_jnl_rename(struct ubifs_info * - if (err) - goto out_ro; - -- err = ubifs_add_dirt(c, lnum, dlen2); -- if (err) -- goto out_ro; -- -- dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); -- err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name); -- if (err) -- goto out_ro; -+ offs += aligned_dlen1; -+ if (whiteout) { -+ dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); -+ err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen2, &old_dentry->d_name); -+ if (err) -+ goto out_ro; -+ -+ ubifs_delete_orphan(c, whiteout->i_ino); -+ } else { -+ err = ubifs_add_dirt(c, lnum, dlen2); -+ if (err) -+ goto out_ro; -+ -+ dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); -+ err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name); -+ if (err) -+ goto out_ro; -+ } - -- offs += aligned_dlen1 + aligned_dlen2; -+ offs += aligned_dlen2; - if (new_inode) { - ino_key_init(c, &key, new_inode->i_ino); - err = ubifs_tnc_add(c, &key, lnum, offs, ilen); ---- a/fs/ubifs/ubifs.h -+++ b/fs/ubifs/ubifs.h -@@ -180,6 +180,7 @@ enum { - WB_MUTEX_1 = 0, - WB_MUTEX_2 = 1, - WB_MUTEX_3 = 2, -+ WB_MUTEX_4 = 3, - }; - - /* -@@ -1546,7 +1547,8 @@ int ubifs_jnl_delete_inode(struct ubifs_ - int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, - const struct dentry *old_dentry, - const struct inode *new_dir, -- const struct dentry *new_dentry, int sync); -+ const struct dentry *new_dentry, -+ const struct inode *whiteout, int sync); - int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, - loff_t old_size, loff_t new_size); - int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host, diff --git a/target/linux/generic/pending-4.4/052-03-ubifs-Implement-RENAME_EXCHANGE.patch b/target/linux/generic/pending-4.4/052-03-ubifs-Implement-RENAME_EXCHANGE.patch deleted file mode 100644 index 1830cd0eeb..0000000000 --- a/target/linux/generic/pending-4.4/052-03-ubifs-Implement-RENAME_EXCHANGE.patch +++ /dev/null @@ -1,267 +0,0 @@ -From: Richard Weinberger <richard@nod.at> -Date: Tue, 13 Sep 2016 16:18:57 +0200 -Subject: [PATCH] ubifs: Implement RENAME_EXCHANGE - -Adds RENAME_EXCHANGE to UBIFS, the operation itself -is completely disjunct from a regular rename() that's -why we dispatch very early in ubifs_reaname(). - -RENAME_EXCHANGE used by the renameat2() system call -allows the caller to exchange two paths atomically. -Both paths have to exist and have to be on the same -filesystem. - -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - ---- a/fs/ubifs/dir.c -+++ b/fs/ubifs/dir.c -@@ -1101,11 +1101,6 @@ static int ubifs_rename(struct inode *ol - old_dentry, old_inode->i_ino, old_dir->i_ino, - new_dentry, new_dir->i_ino, flags); - -- if (flags & ~(RENAME_NOREPLACE | RENAME_WHITEOUT)) -- return -EINVAL; -- -- ubifs_assert(mutex_is_locked(&old_dir->i_mutex)); -- ubifs_assert(mutex_is_locked(&new_dir->i_mutex)); - if (unlink) - ubifs_assert(mutex_is_locked(&new_inode->i_mutex)); - -@@ -1290,6 +1285,64 @@ out_cancel: - return err; - } - -+static int ubifs_xrename(struct inode *old_dir, struct dentry *old_dentry, -+ struct inode *new_dir, struct dentry *new_dentry) -+{ -+ struct ubifs_info *c = old_dir->i_sb->s_fs_info; -+ struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1, -+ .dirtied_ino = 2 }; -+ int sync = IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir); -+ struct inode *fst_inode = d_inode(old_dentry); -+ struct inode *snd_inode = d_inode(new_dentry); -+ struct timespec time; -+ int err; -+ -+ ubifs_assert(fst_inode && snd_inode); -+ -+ lock_4_inodes(old_dir, new_dir, NULL, NULL); -+ -+ time = ubifs_current_time(old_dir); -+ fst_inode->i_ctime = time; -+ snd_inode->i_ctime = time; -+ old_dir->i_mtime = old_dir->i_ctime = time; -+ new_dir->i_mtime = new_dir->i_ctime = time; -+ -+ if (old_dir != new_dir) { -+ if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) { -+ inc_nlink(new_dir); -+ drop_nlink(old_dir); -+ } -+ else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) { -+ drop_nlink(new_dir); -+ inc_nlink(old_dir); -+ } -+ } -+ -+ err = ubifs_jnl_xrename(c, old_dir, old_dentry, new_dir, new_dentry, -+ sync); -+ -+ unlock_4_inodes(old_dir, new_dir, NULL, NULL); -+ ubifs_release_budget(c, &req); -+ -+ return err; -+} -+ -+static int ubifs_rename2(struct inode *old_dir, struct dentry *old_dentry, -+ struct inode *new_dir, struct dentry *new_dentry, -+ unsigned int flags) -+{ -+ if (flags & ~(RENAME_NOREPLACE | RENAME_WHITEOUT | RENAME_EXCHANGE)) -+ return -EINVAL; -+ -+ ubifs_assert(mutex_is_locked(&old_dir->i_mutex)); -+ ubifs_assert(mutex_is_locked(&new_dir->i_mutex)); -+ -+ if (flags & RENAME_EXCHANGE) -+ return ubifs_xrename(old_dir, old_dentry, new_dir, new_dentry); -+ -+ return ubifs_rename(old_dir, old_dentry, new_dir, new_dentry, flags); -+} -+ - int ubifs_getattr(struct vfsmount *mnt, struct dentry *dentry, - struct kstat *stat) - { -@@ -1338,7 +1391,7 @@ const struct inode_operations ubifs_dir_ - .mkdir = ubifs_mkdir, - .rmdir = ubifs_rmdir, - .mknod = ubifs_mknod, -- .rename2 = ubifs_rename, -+ .rename2 = ubifs_rename2, - .setattr = ubifs_setattr, - .getattr = ubifs_getattr, - .setxattr = ubifs_setxattr, ---- a/fs/ubifs/journal.c -+++ b/fs/ubifs/journal.c -@@ -908,6 +908,147 @@ int ubifs_jnl_delete_inode(struct ubifs_ - } - - /** -+ * ubifs_jnl_xrename - cross rename two directory entries. -+ * @c: UBIFS file-system description object -+ * @fst_dir: parent inode of 1st directory entry to exchange -+ * @fst_dentry: 1st directory entry to exchange -+ * @snd_dir: parent inode of 2nd directory entry to exchange -+ * @snd_dentry: 2nd directory entry to exchange -+ * @sync: non-zero if the write-buffer has to be synchronized -+ * -+ * This function implements the cross rename operation which may involve -+ * writing 2 inodes and 2 directory entries. It marks the written inodes as clean -+ * and returns zero on success. In case of failure, a negative error code is -+ * returned. -+ */ -+int ubifs_jnl_xrename(struct ubifs_info *c, const struct inode *fst_dir, -+ const struct dentry *fst_dentry, -+ const struct inode *snd_dir, -+ const struct dentry *snd_dentry, int sync) -+{ -+ union ubifs_key key; -+ struct ubifs_dent_node *dent1, *dent2; -+ int err, dlen1, dlen2, lnum, offs, len, plen = UBIFS_INO_NODE_SZ; -+ int aligned_dlen1, aligned_dlen2; -+ int twoparents = (fst_dir != snd_dir); -+ const struct inode *fst_inode = d_inode(fst_dentry); -+ const struct inode *snd_inode = d_inode(snd_dentry); -+ void *p; -+ -+ dbg_jnl("dent '%pd' in dir ino %lu between dent '%pd' in dir ino %lu", -+ fst_dentry, fst_dir->i_ino, snd_dentry, snd_dir->i_ino); -+ -+ ubifs_assert(ubifs_inode(fst_dir)->data_len == 0); -+ ubifs_assert(ubifs_inode(snd_dir)->data_len == 0); -+ ubifs_assert(mutex_is_locked(&ubifs_inode(fst_dir)->ui_mutex)); -+ ubifs_assert(mutex_is_locked(&ubifs_inode(snd_dir)->ui_mutex)); -+ -+ dlen1 = UBIFS_DENT_NODE_SZ + snd_dentry->d_name.len + 1; -+ dlen2 = UBIFS_DENT_NODE_SZ + fst_dentry->d_name.len + 1; -+ aligned_dlen1 = ALIGN(dlen1, 8); -+ aligned_dlen2 = ALIGN(dlen2, 8); -+ -+ len = aligned_dlen1 + aligned_dlen2 + ALIGN(plen, 8); -+ if (twoparents) -+ len += plen; -+ -+ dent1 = kmalloc(len, GFP_NOFS); -+ if (!dent1) -+ return -ENOMEM; -+ -+ /* Make reservation before allocating sequence numbers */ -+ err = make_reservation(c, BASEHD, len); -+ if (err) -+ goto out_free; -+ -+ /* Make new dent for 1st entry */ -+ dent1->ch.node_type = UBIFS_DENT_NODE; -+ dent_key_init_flash(c, &dent1->key, snd_dir->i_ino, &snd_dentry->d_name); -+ dent1->inum = cpu_to_le64(fst_inode->i_ino); -+ dent1->type = get_dent_type(fst_inode->i_mode); -+ dent1->nlen = cpu_to_le16(snd_dentry->d_name.len); -+ memcpy(dent1->name, snd_dentry->d_name.name, snd_dentry->d_name.len); -+ dent1->name[snd_dentry->d_name.len] = '\0'; -+ zero_dent_node_unused(dent1); -+ ubifs_prep_grp_node(c, dent1, dlen1, 0); -+ -+ /* Make new dent for 2nd entry */ -+ dent2 = (void *)dent1 + aligned_dlen1; -+ dent2->ch.node_type = UBIFS_DENT_NODE; -+ dent_key_init_flash(c, &dent2->key, fst_dir->i_ino, &fst_dentry->d_name); -+ dent2->inum = cpu_to_le64(snd_inode->i_ino); -+ dent2->type = get_dent_type(snd_inode->i_mode); -+ dent2->nlen = cpu_to_le16(fst_dentry->d_name.len); -+ memcpy(dent2->name, fst_dentry->d_name.name, fst_dentry->d_name.len); -+ dent2->name[fst_dentry->d_name.len] = '\0'; -+ zero_dent_node_unused(dent2); -+ ubifs_prep_grp_node(c, dent2, dlen2, 0); -+ -+ p = (void *)dent2 + aligned_dlen2; -+ if (!twoparents) -+ pack_inode(c, p, fst_dir, 1); -+ else { -+ pack_inode(c, p, fst_dir, 0); -+ p += ALIGN(plen, 8); -+ pack_inode(c, p, snd_dir, 1); -+ } -+ -+ err = write_head(c, BASEHD, dent1, len, &lnum, &offs, sync); -+ if (err) -+ goto out_release; -+ if (!sync) { -+ struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; -+ -+ ubifs_wbuf_add_ino_nolock(wbuf, fst_dir->i_ino); -+ ubifs_wbuf_add_ino_nolock(wbuf, snd_dir->i_ino); -+ } -+ release_head(c, BASEHD); -+ -+ dent_key_init(c, &key, snd_dir->i_ino, &snd_dentry->d_name); -+ err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &snd_dentry->d_name); -+ if (err) -+ goto out_ro; -+ -+ offs += aligned_dlen1; -+ dent_key_init(c, &key, fst_dir->i_ino, &fst_dentry->d_name); -+ err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen2, &fst_dentry->d_name); -+ if (err) -+ goto out_ro; -+ -+ offs += aligned_dlen2; -+ -+ ino_key_init(c, &key, fst_dir->i_ino); -+ err = ubifs_tnc_add(c, &key, lnum, offs, plen); -+ if (err) -+ goto out_ro; -+ -+ if (twoparents) { -+ offs += ALIGN(plen, 8); -+ ino_key_init(c, &key, snd_dir->i_ino); -+ err = ubifs_tnc_add(c, &key, lnum, offs, plen); -+ if (err) -+ goto out_ro; -+ } -+ -+ finish_reservation(c); -+ -+ mark_inode_clean(c, ubifs_inode(fst_dir)); -+ if (twoparents) -+ mark_inode_clean(c, ubifs_inode(snd_dir)); -+ kfree(dent1); -+ return 0; -+ -+out_release: -+ release_head(c, BASEHD); -+out_ro: -+ ubifs_ro_mode(c, err); -+ finish_reservation(c); -+out_free: -+ kfree(dent1); -+ return err; -+} -+ -+/** - * ubifs_jnl_rename - rename a directory entry. - * @c: UBIFS file-system description object - * @old_dir: parent inode of directory entry to rename ---- a/fs/ubifs/ubifs.h -+++ b/fs/ubifs/ubifs.h -@@ -1544,6 +1544,10 @@ int ubifs_jnl_write_data(struct ubifs_in - const union ubifs_key *key, const void *buf, int len); - int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode); - int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode); -+int ubifs_jnl_xrename(struct ubifs_info *c, const struct inode *fst_dir, -+ const struct dentry *fst_dentry, -+ const struct inode *snd_dir, -+ const struct dentry *snd_dentry, int sync); - int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, - const struct dentry *old_dentry, - const struct inode *new_dir, diff --git a/target/linux/generic/pending-4.4/052-04-ubifs-Use-move-variable-in-ubifs_rename.patch b/target/linux/generic/pending-4.4/052-04-ubifs-Use-move-variable-in-ubifs_rename.patch deleted file mode 100644 index 81129359d3..0000000000 --- a/target/linux/generic/pending-4.4/052-04-ubifs-Use-move-variable-in-ubifs_rename.patch +++ /dev/null @@ -1,30 +0,0 @@ -From: Richard Weinberger <richard@nod.at> -Date: Tue, 13 Sep 2016 16:18:58 +0200 -Subject: [PATCH] ubifs: Use move variable in ubifs_rename() - -...to make the code more consistent since we use -move already in other places. - -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - ---- a/fs/ubifs/journal.c -+++ b/fs/ubifs/journal.c -@@ -1100,7 +1100,7 @@ int ubifs_jnl_rename(struct ubifs_info * - aligned_dlen1 = ALIGN(dlen1, 8); - aligned_dlen2 = ALIGN(dlen2, 8); - len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8); -- if (old_dir != new_dir) -+ if (move) - len += plen; - dent = kmalloc(len, GFP_NOFS); - if (!dent) -@@ -1216,7 +1216,7 @@ int ubifs_jnl_rename(struct ubifs_info * - if (err) - goto out_ro; - -- if (old_dir != new_dir) { -+ if (move) { - offs += ALIGN(plen, 8); - ino_key_init(c, &key, new_dir->i_ino); - err = ubifs_tnc_add(c, &key, lnum, offs, plen); diff --git a/target/linux/generic/pending-4.4/053-0001-ubifs-Drop-softlimit-and-delta-fields-from-struct-ub.patch b/target/linux/generic/pending-4.4/053-0001-ubifs-Drop-softlimit-and-delta-fields-from-struct-ub.patch deleted file mode 100644 index 662584ca61..0000000000 --- a/target/linux/generic/pending-4.4/053-0001-ubifs-Drop-softlimit-and-delta-fields-from-struct-ub.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 854826c9d526fd81077742c3b000e3f7fcaef3ce Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 20 Sep 2016 10:36:14 +0200 -Subject: [PATCH] ubifs: Drop softlimit and delta fields from struct ubifs_wbuf -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Values of these fields are set during init and never modified. They are -used (read) in a single function only. There isn't really any reason to -keep them in a struct. It only makes struct just a bit bigger without -any visible gain. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - fs/ubifs/io.c | 18 ++++++++++-------- - fs/ubifs/ubifs.h | 5 ----- - 2 files changed, 10 insertions(+), 13 deletions(-) - ---- a/fs/ubifs/io.c -+++ b/fs/ubifs/io.c -@@ -452,16 +452,22 @@ static enum hrtimer_restart wbuf_timer_c - */ - static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf) - { -+ ktime_t softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0); -+ unsigned long long delta; -+ -+ delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT; -+ delta *= 1000000000ULL; -+ - ubifs_assert(!hrtimer_active(&wbuf->timer)); -+ ubifs_assert(delta <= ULONG_MAX); - - if (wbuf->no_timer) - return; - dbg_io("set timer for jhead %s, %llu-%llu millisecs", - dbg_jhead(wbuf->jhead), -- div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC), -- div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta, -- USEC_PER_SEC)); -- hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta, -+ div_u64(ktime_to_ns(softlimit), USEC_PER_SEC), -+ div_u64(ktime_to_ns(softlimit) + delta, USEC_PER_SEC)); -+ hrtimer_start_range_ns(&wbuf->timer, softlimit, delta, - HRTIMER_MODE_REL); - } - -@@ -1059,10 +1065,6 @@ int ubifs_wbuf_init(struct ubifs_info *c - - hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - wbuf->timer.function = wbuf_timer_callback_nolock; -- wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0); -- wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT; -- wbuf->delta *= 1000000000ULL; -- ubifs_assert(wbuf->delta <= ULONG_MAX); - return 0; - } - ---- a/fs/ubifs/ubifs.h -+++ b/fs/ubifs/ubifs.h -@@ -668,9 +668,6 @@ typedef int (*ubifs_lpt_scan_callback)(s - * @io_mutex: serializes write-buffer I/O - * @lock: serializes @buf, @lnum, @offs, @avail, @used, @next_ino and @inodes - * fields -- * @softlimit: soft write-buffer timeout interval -- * @delta: hard and soft timeouts delta (the timer expire interval is @softlimit -- * and @softlimit + @delta) - * @timer: write-buffer timer - * @no_timer: non-zero if this write-buffer does not have a timer - * @need_sync: non-zero if the timer expired and the wbuf needs sync'ing -@@ -699,8 +696,6 @@ struct ubifs_wbuf { - int (*sync_callback)(struct ubifs_info *c, int lnum, int free, int pad); - struct mutex io_mutex; - spinlock_t lock; -- ktime_t softlimit; -- unsigned long long delta; - struct hrtimer timer; - unsigned int no_timer:1; - unsigned int need_sync:1; diff --git a/target/linux/generic/pending-4.4/053-0002-ubifs-Use-dirty_writeback_interval-value-for-wbuf-ti.patch b/target/linux/generic/pending-4.4/053-0002-ubifs-Use-dirty_writeback_interval-value-for-wbuf-ti.patch deleted file mode 100644 index 9313cd557e..0000000000 --- a/target/linux/generic/pending-4.4/053-0002-ubifs-Use-dirty_writeback_interval-value-for-wbuf-ti.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 1b7fc2c0069f3864a3dda15430b7aded31c0bfcc Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 20 Sep 2016 10:36:15 +0200 -Subject: [PATCH] ubifs: Use dirty_writeback_interval value for wbuf timer -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Right now wbuf timer has hardcoded timeouts and there is no place for -manual adjustments. Some projects / cases many need that though. Few -file systems allow doing that by respecting dirty_writeback_interval -that can be set using sysctl (dirty_writeback_centisecs). - -Lowering dirty_writeback_interval could be some way of dealing with user -space apps lacking proper fsyncs. This is definitely *not* a perfect -solution but we don't have ideal (user space) world. There were already -advanced discussions on this matter, mostly when ext4 was introduced and -it wasn't behaving as ext3. Anyway, the final decision was to add some -hacks to the ext4, as trying to fix whole user space or adding new API -was pointless. - -We can't (and shouldn't?) just follow ext4. We can't e.g. sync on close -as this would cause too many commits and flash wearing. On the other -hand we still should allow some trade-off between -o sync and default -wbuf timeout. Respecting dirty_writeback_interval should allow some sane -cutomizations if used warily. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> -Signed-off-by: Richard Weinberger <richard@nod.at> ---- - fs/ubifs/io.c | 8 ++++---- - fs/ubifs/ubifs.h | 4 ---- - 2 files changed, 4 insertions(+), 8 deletions(-) - ---- a/fs/ubifs/io.c -+++ b/fs/ubifs/io.c -@@ -452,11 +452,11 @@ static enum hrtimer_restart wbuf_timer_c - */ - static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf) - { -- ktime_t softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0); -- unsigned long long delta; -+ ktime_t softlimit = ms_to_ktime(dirty_writeback_interval * 10); -+ unsigned long long delta = dirty_writeback_interval; - -- delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT; -- delta *= 1000000000ULL; -+ /* centi to milli, milli to nano, then 10% */ -+ delta *= 10ULL * NSEC_PER_MSEC / 10ULL; - - ubifs_assert(!hrtimer_active(&wbuf->timer)); - ubifs_assert(delta <= ULONG_MAX); ---- a/fs/ubifs/ubifs.h -+++ b/fs/ubifs/ubifs.h -@@ -106,10 +106,6 @@ - */ - #define BGT_NAME_PATTERN "ubifs_bgt%d_%d" - --/* Write-buffer synchronization timeout interval in seconds */ --#define WBUF_TIMEOUT_SOFTLIMIT 3 --#define WBUF_TIMEOUT_HARDLIMIT 5 -- - /* Maximum possible inode number (only 32-bit inodes are supported now) */ - #define MAX_INUM 0xFFFFFFFF - diff --git a/target/linux/generic/pending-4.4/060-mips_decompressor_memmove.patch b/target/linux/generic/pending-4.4/060-mips_decompressor_memmove.patch deleted file mode 100644 index d215b80ab2..0000000000 --- a/target/linux/generic/pending-4.4/060-mips_decompressor_memmove.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/boot/compressed/string.c -+++ b/arch/mips/boot/compressed/string.c -@@ -26,3 +26,19 @@ void *memset(void *s, int c, size_t n) - ss[i] = c; - return s; - } -+ -+void *memmove(void *__dest, __const void *__src, size_t count) -+{ -+ unsigned char *d = __dest; -+ const unsigned char *s = __src; -+ -+ if (__dest == __src) -+ return __dest; -+ -+ if (__dest < __src) -+ return memcpy(__dest, __src, count); -+ -+ while (count--) -+ d[count] = s[count]; -+ return __dest; -+} diff --git a/target/linux/generic/pending-4.4/061-softirq-let-ksoftirqd-do-its-job.patch b/target/linux/generic/pending-4.4/061-softirq-let-ksoftirqd-do-its-job.patch deleted file mode 100644 index a2de48093c..0000000000 --- a/target/linux/generic/pending-4.4/061-softirq-let-ksoftirqd-do-its-job.patch +++ /dev/null @@ -1,83 +0,0 @@ -From: Eric Dumazet <edumazet@google.com> -Date: Wed, 31 Aug 2016 10:42:29 -0700 -Subject: [PATCH] softirq: let ksoftirqd do its job - -A while back, Paolo and Hannes sent an RFC patch adding threaded-able -napi poll loop support : (https://patchwork.ozlabs.org/patch/620657/) - -The problem seems to be that softirqs are very aggressive and are often -handled by the current process, even if we are under stress and that -ksoftirqd was scheduled, so that innocent threads would have more chance -to make progress. - -This patch makes sure that if ksoftirq is running, we let it -perform the softirq work. - -Jonathan Corbet summarized the issue in https://lwn.net/Articles/687617/ - -Tested: - - - NIC receiving traffic handled by CPU 0 - - UDP receiver running on CPU 0, using a single UDP socket. - - Incoming flood of UDP packets targeting the UDP socket. - -Before the patch, the UDP receiver could almost never get cpu cycles and -could only receive ~2,000 packets per second. - -After the patch, cpu cycles are split 50/50 between user application and -ksoftirqd/0, and we can effectively read ~900,000 packets per second, -a huge improvement in DOS situation. (Note that more packets are now -dropped by the NIC itself, since the BH handlers get less cpu cycles to -drain RX ring buffer) - -Since the load runs in well identified threads context, an admin can -more easily tune process scheduling parameters if needed. - -Reported-by: Paolo Abeni <pabeni@redhat.com> -Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> -Signed-off-by: Eric Dumazet <edumazet@google.com> -Cc: David Miller <davem@davemloft.net -Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> -Cc: Peter Zijlstra <peterz@infradead.org> -Cc: Rik van Riel <riel@redhat.com> ---- - ---- a/kernel/softirq.c -+++ b/kernel/softirq.c -@@ -78,6 +78,17 @@ static void wakeup_softirqd(void) - } - - /* -+ * If ksoftirqd is scheduled, we do not want to process pending softirqs -+ * right now. Let ksoftirqd handle this at its own rate, to get fairness. -+ */ -+static bool ksoftirqd_running(void) -+{ -+ struct task_struct *tsk = __this_cpu_read(ksoftirqd); -+ -+ return tsk && (tsk->state == TASK_RUNNING); -+} -+ -+/* - * preempt_count and SOFTIRQ_OFFSET usage: - * - preempt_count is changed by SOFTIRQ_OFFSET on entering or leaving - * softirq processing. -@@ -313,7 +324,7 @@ asmlinkage __visible void do_softirq(voi - - pending = local_softirq_pending(); - -- if (pending) -+ if (pending && !ksoftirqd_running()) - do_softirq_own_stack(); - - local_irq_restore(flags); -@@ -340,6 +351,9 @@ void irq_enter(void) - - static inline void invoke_softirq(void) - { -+ if (ksoftirqd_running()) -+ return; -+ - if (!force_irqthreads) { - #ifdef CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK - /* diff --git a/target/linux/generic/pending-4.4/067-v4.11-mtd-nand-Add-Winbond-manufacturer-id.patch b/target/linux/generic/pending-4.4/067-v4.11-mtd-nand-Add-Winbond-manufacturer-id.patch deleted file mode 100644 index d102d89b20..0000000000 --- a/target/linux/generic/pending-4.4/067-v4.11-mtd-nand-Add-Winbond-manufacturer-id.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a4077ce5871304f8a78f80b74b18b6052a410f1a Mon Sep 17 00:00:00 2001 -From: "Andrey Jr. Melnikov" <temnota.am@gmail.com> -Date: Thu, 8 Dec 2016 19:57:08 +0300 -Subject: [PATCH] mtd: nand: Add Winbond manufacturer id - -Add WINBOND manufacturer id. - -Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> -Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> ---- - drivers/mtd/nand/nand_ids.c | 1 + - include/linux/mtd/nand.h | 1 + - 2 files changed, 2 insertions(+) - ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -181,6 +181,7 @@ struct nand_manufacturers nand_manuf_ids - {NAND_MFR_SANDISK, "SanDisk"}, - {NAND_MFR_INTEL, "Intel"}, - {NAND_MFR_ATO, "ATO"}, -+ {NAND_MFR_WINBOND, "Winbond"}, - {0x0, "Unknown"} - }; - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -736,6 +736,7 @@ struct nand_chip { - #define NAND_MFR_SANDISK 0x45 - #define NAND_MFR_INTEL 0x89 - #define NAND_MFR_ATO 0x9b -+#define NAND_MFR_WINBOND 0xef - - /* The maximum expected count of bytes in the NAND ID sequence */ - #define NAND_MAX_ID_LEN 8 diff --git a/target/linux/generic/pending-4.4/070-v4.5-0003-net-bgmac-clarify-CONFIG_BCMA-dependency.patch b/target/linux/generic/pending-4.4/070-v4.5-0003-net-bgmac-clarify-CONFIG_BCMA-dependency.patch deleted file mode 100644 index cd0d09887f..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.5-0003-net-bgmac-clarify-CONFIG_BCMA-dependency.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 1f820f538f7396db7fd40684b9c3620816acc5a3 Mon Sep 17 00:00:00 2001 -From: Arnd Bergmann <arnd@arndb.de> -Date: Fri, 29 Jan 2016 12:39:12 +0100 -Subject: [PATCH] net: bgmac: clarify CONFIG_BCMA dependency - -The bgmac driver depends on BCMA_HOST_SOC, which is only used -when CONFIG_BCMA is enabled. However, it is a bool option and can -be set when CONFIG_BCMA=m, and then bgmac can be built-in, leading -to an obvious link error: - -drivers/built-in.o: In function `bgmac_init': -:(.init.text+0x7f2c): undefined reference to `__bcma_driver_register' -drivers/built-in.o: In function `bgmac_exit': -:(.exit.text+0x110a): undefined reference to `bcma_driver_unregister' - -To avoid this case, we need to depend on both BCMA and BCMA_SOC, -as this patch does. I'm also trying to make the dependency more -readable by splitting it into three lines, and adding a COMPILE_TEST -alternative so we can test-build it in all configurations that -support BCMA. - -The added dependency on FIXED_PHY addresses a related issue where -we cannot call fixed_phy_register() when CONFIG_FIXED_PHY=m and -CONFIG_BGMAC=y. - -Signed-off-by: Arnd Bergmann <arnd@arndb.de> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/Kconfig | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/Kconfig -+++ b/drivers/net/ethernet/broadcom/Kconfig -@@ -151,8 +151,11 @@ config BNX2X_VXLAN - - config BGMAC - tristate "BCMA bus GBit core support" -- depends on BCMA_HOST_SOC && HAS_DMA && (BCM47XX || ARCH_BCM_5301X) -+ depends on BCMA && BCMA_HOST_SOC -+ depends on HAS_DMA -+ depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST - select PHYLIB -+ select FIXED_PHY - ---help--- - This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. - They can be found on BCM47xx SoCs and provide gigabit ethernet. diff --git a/target/linux/generic/pending-4.4/070-v4.6-0001-bgmac-add-helper-checking-for-BCM4707-BCM53018-chip-.patch b/target/linux/generic/pending-4.4/070-v4.6-0001-bgmac-add-helper-checking-for-BCM4707-BCM53018-chip-.patch deleted file mode 100644 index 94a37d4437..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.6-0001-bgmac-add-helper-checking-for-BCM4707-BCM53018-chip-.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 387b75f8b31437792e8334390fdf5cf060d1e3da Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 2 Feb 2016 07:47:14 +0100 -Subject: [PATCH] bgmac: add helper checking for BCM4707 / BCM53018 chip id -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Chipsets with BCM4707 / BCM53018 ID require special handling at a few -places in the code. It's likely there will be more IDs to check in the -future. To simplify it add this trivial helper. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 30 ++++++++++++++++-------------- - 1 file changed, 16 insertions(+), 14 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -26,6 +26,17 @@ static const struct bcma_device_id bgmac - }; - MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); - -+static inline bool bgmac_is_bcm4707_family(struct bgmac *bgmac) -+{ -+ switch (bgmac->core->bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4707: -+ case BCMA_CHIP_ID_BCM53018: -+ return true; -+ default: -+ return false; -+ } -+} -+ - static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask, - u32 value, int timeout) - { -@@ -991,11 +1002,9 @@ static void bgmac_mac_speed(struct bgmac - static void bgmac_miiconfig(struct bgmac *bgmac) - { - struct bcma_device *core = bgmac->core; -- struct bcma_chipinfo *ci = &core->bus->chipinfo; - u8 imode; - -- if (ci->id == BCMA_CHIP_ID_BCM4707 || -- ci->id == BCMA_CHIP_ID_BCM53018) { -+ if (bgmac_is_bcm4707_family(bgmac)) { - bcma_awrite32(core, BCMA_IOCTL, - bcma_aread32(core, BCMA_IOCTL) | 0x40 | - BGMAC_BCMA_IOCTL_SW_CLKEN); -@@ -1059,9 +1068,7 @@ static void bgmac_chip_reset(struct bgma - } - - /* Request Misc PLL for corerev > 2 */ -- if (core->id.rev > 2 && -- ci->id != BCMA_CHIP_ID_BCM4707 && -- ci->id != BCMA_CHIP_ID_BCM53018) { -+ if (core->id.rev > 2 && !bgmac_is_bcm4707_family(bgmac)) { - bgmac_set(bgmac, BCMA_CLKCTLST, - BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ); - bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, -@@ -1197,8 +1204,7 @@ static void bgmac_enable(struct bgmac *b - break; - } - -- if (ci->id != BCMA_CHIP_ID_BCM4707 && -- ci->id != BCMA_CHIP_ID_BCM53018) { -+ if (!bgmac_is_bcm4707_family(bgmac)) { - rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); - rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; - bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / -@@ -1477,14 +1483,12 @@ static int bgmac_fixed_phy_register(stru - - static int bgmac_mii_register(struct bgmac *bgmac) - { -- struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; - struct mii_bus *mii_bus; - struct phy_device *phy_dev; - char bus_id[MII_BUS_ID_SIZE + 3]; - int i, err = 0; - -- if (ci->id == BCMA_CHIP_ID_BCM4707 || -- ci->id == BCMA_CHIP_ID_BCM53018) -+ if (bgmac_is_bcm4707_family(bgmac)) - return bgmac_fixed_phy_register(bgmac); - - mii_bus = mdiobus_alloc(); -@@ -1555,7 +1559,6 @@ static void bgmac_mii_unregister(struct - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ - static int bgmac_probe(struct bcma_device *core) - { -- struct bcma_chipinfo *ci = &core->bus->chipinfo; - struct net_device *net_dev; - struct bgmac *bgmac; - struct ssb_sprom *sprom = &core->bus->sprom; -@@ -1641,8 +1644,7 @@ static int bgmac_probe(struct bcma_devic - bgmac_chip_reset(bgmac); - - /* For Northstar, we have to take all GMAC core out of reset */ -- if (ci->id == BCMA_CHIP_ID_BCM4707 || -- ci->id == BCMA_CHIP_ID_BCM53018) { -+ if (bgmac_is_bcm4707_family(bgmac)) { - struct bcma_device *ns_core; - int ns_gmac; - diff --git a/target/linux/generic/pending-4.4/070-v4.6-0002-bgmac-support-Ethernet-device-on-BCM47094-SoC.patch b/target/linux/generic/pending-4.4/070-v4.6-0002-bgmac-support-Ethernet-device-on-BCM47094-SoC.patch deleted file mode 100644 index 41e470b314..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.6-0002-bgmac-support-Ethernet-device-on-BCM47094-SoC.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 9e4e6206c67ae11d68fc96882256f37c237087d4 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Mon, 22 Feb 2016 22:51:13 +0100 -Subject: [PATCH] bgmac: support Ethernet device on BCM47094 SoC -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It needs very similar workarounds to the one on BCM4707. It was tested -on D-Link DIR-885L home router. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -30,6 +30,7 @@ static inline bool bgmac_is_bcm4707_fami - { - switch (bgmac->core->bus->chipinfo.id) { - case BCMA_CHIP_ID_BCM4707: -+ case BCMA_CHIP_ID_BCM47094: - case BCMA_CHIP_ID_BCM53018: - return true; - default: -@@ -1056,8 +1057,9 @@ static void bgmac_chip_reset(struct bgma - (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) - iost &= ~BGMAC_BCMA_IOST_ATTACHED; - -- /* 3GMAC: for BCM4707, only do core reset at bgmac_probe() */ -- if (ci->id != BCMA_CHIP_ID_BCM4707) { -+ /* 3GMAC: for BCM4707 & BCM47094, only do core reset at bgmac_probe() */ -+ if (ci->id != BCMA_CHIP_ID_BCM4707 && -+ ci->id != BCMA_CHIP_ID_BCM47094) { - flags = 0; - if (iost & BGMAC_BCMA_IOST_ATTACHED) { - flags = BGMAC_BCMA_IOCTL_SW_CLKEN; diff --git a/target/linux/generic/pending-4.4/070-v4.6-0004-bgmac-fix-MAC-soft-reset-bit-for-corerev-4.patch b/target/linux/generic/pending-4.4/070-v4.6-0004-bgmac-fix-MAC-soft-reset-bit-for-corerev-4.patch deleted file mode 100644 index a5fcaab51c..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.6-0004-bgmac-fix-MAC-soft-reset-bit-for-corerev-4.patch +++ /dev/null @@ -1,34 +0,0 @@ -From c02bc350f9dbce7d637c394a6e1c4d29dc5b28b2 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 12 Apr 2016 18:27:29 +0200 -Subject: [PATCH] bgmac: fix MAC soft-reset bit for corerev > 4 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly -fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means -only some devices as most of BCM4708A0KF-s got core rev 4). -This was tested for regressions on BCM47094 which doesn't seem to care -which bit gets used. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -199,9 +199,9 @@ - #define BGMAC_CMDCFG_TAI 0x00000200 - #define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ - #define BGMAC_CMDCFG_HD_SHIFT 10 --#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for other revs */ --#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, only for core rev 4 */ --#define BGMAC_CMDCFG_SR(rev) ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) -+#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */ -+#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */ -+#define BGMAC_CMDCFG_SR(rev) ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) - #define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ - #define BGMAC_CMDCFG_AE 0x00400000 - #define BGMAC_CMDCFG_CFE 0x00800000 diff --git a/target/linux/generic/pending-4.4/070-v4.8-0001-bgmac-Bind-net_device-with-backing-device-structure.patch b/target/linux/generic/pending-4.4/070-v4.8-0001-bgmac-Bind-net_device-with-backing-device-structure.patch deleted file mode 100644 index 8f6d9a9ee7..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.8-0001-bgmac-Bind-net_device-with-backing-device-structure.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 2022e9d50798aa592887ccb5a7d045e537f3855f Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <f.fainelli@gmail.com> -Date: Tue, 7 Jun 2016 15:06:13 -0700 -Subject: [PATCH 1/3] bgmac: Bind net_device with backing device structure - -In preparation for allowing different helpers to be utilized against -network devices created by the bgmac driver, make sure that we bind the -net_device with core->dev. - -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1604,6 +1604,7 @@ static int bgmac_probe(struct bcma_devic - bgmac->net_dev = net_dev; - bgmac->core = core; - bcma_set_drvdata(core, bgmac); -+ SET_NETDEV_DEV(net_dev, &core->dev); - - /* Defaults */ - memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN); diff --git a/target/linux/generic/pending-4.4/070-v4.8-0002-bgmac-Add-support-for-ethtool-statistics.patch b/target/linux/generic/pending-4.4/070-v4.8-0002-bgmac-Add-support-for-ethtool-statistics.patch deleted file mode 100644 index 585282b0aa..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.8-0002-bgmac-Add-support-for-ethtool-statistics.patch +++ /dev/null @@ -1,175 +0,0 @@ -From f6613d4fa937fa8388f2c1cb4e69ccc25e9e2336 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <f.fainelli@gmail.com> -Date: Tue, 7 Jun 2016 15:06:14 -0700 -Subject: [PATCH 2/3] bgmac: Add support for ethtool statistics - -Read the statistics from the BGMAC's builtin MAC and return them to -user-space using the standard ethtool helpers. - -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 124 ++++++++++++++++++++++++++++++++++ - drivers/net/ethernet/broadcom/bgmac.h | 4 +- - 2 files changed, 126 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1387,6 +1387,127 @@ static const struct net_device_ops bgmac - * ethtool_ops - **************************************************/ - -+struct bgmac_stat { -+ u8 size; -+ u32 offset; -+ const char *name; -+}; -+ -+static struct bgmac_stat bgmac_get_strings_stats[] = { -+ { 8, BGMAC_TX_GOOD_OCTETS, "tx_good_octets" }, -+ { 4, BGMAC_TX_GOOD_PKTS, "tx_good" }, -+ { 8, BGMAC_TX_OCTETS, "tx_octets" }, -+ { 4, BGMAC_TX_PKTS, "tx_pkts" }, -+ { 4, BGMAC_TX_BROADCAST_PKTS, "tx_broadcast" }, -+ { 4, BGMAC_TX_MULTICAST_PKTS, "tx_multicast" }, -+ { 4, BGMAC_TX_LEN_64, "tx_64" }, -+ { 4, BGMAC_TX_LEN_65_TO_127, "tx_65_127" }, -+ { 4, BGMAC_TX_LEN_128_TO_255, "tx_128_255" }, -+ { 4, BGMAC_TX_LEN_256_TO_511, "tx_256_511" }, -+ { 4, BGMAC_TX_LEN_512_TO_1023, "tx_512_1023" }, -+ { 4, BGMAC_TX_LEN_1024_TO_1522, "tx_1024_1522" }, -+ { 4, BGMAC_TX_LEN_1523_TO_2047, "tx_1523_2047" }, -+ { 4, BGMAC_TX_LEN_2048_TO_4095, "tx_2048_4095" }, -+ { 4, BGMAC_TX_LEN_4096_TO_8191, "tx_4096_8191" }, -+ { 4, BGMAC_TX_LEN_8192_TO_MAX, "tx_8192_max" }, -+ { 4, BGMAC_TX_JABBER_PKTS, "tx_jabber" }, -+ { 4, BGMAC_TX_OVERSIZE_PKTS, "tx_oversize" }, -+ { 4, BGMAC_TX_FRAGMENT_PKTS, "tx_fragment" }, -+ { 4, BGMAC_TX_UNDERRUNS, "tx_underruns" }, -+ { 4, BGMAC_TX_TOTAL_COLS, "tx_total_cols" }, -+ { 4, BGMAC_TX_SINGLE_COLS, "tx_single_cols" }, -+ { 4, BGMAC_TX_MULTIPLE_COLS, "tx_multiple_cols" }, -+ { 4, BGMAC_TX_EXCESSIVE_COLS, "tx_excessive_cols" }, -+ { 4, BGMAC_TX_LATE_COLS, "tx_late_cols" }, -+ { 4, BGMAC_TX_DEFERED, "tx_defered" }, -+ { 4, BGMAC_TX_CARRIER_LOST, "tx_carrier_lost" }, -+ { 4, BGMAC_TX_PAUSE_PKTS, "tx_pause" }, -+ { 4, BGMAC_TX_UNI_PKTS, "tx_unicast" }, -+ { 4, BGMAC_TX_Q0_PKTS, "tx_q0" }, -+ { 8, BGMAC_TX_Q0_OCTETS, "tx_q0_octets" }, -+ { 4, BGMAC_TX_Q1_PKTS, "tx_q1" }, -+ { 8, BGMAC_TX_Q1_OCTETS, "tx_q1_octets" }, -+ { 4, BGMAC_TX_Q2_PKTS, "tx_q2" }, -+ { 8, BGMAC_TX_Q2_OCTETS, "tx_q2_octets" }, -+ { 4, BGMAC_TX_Q3_PKTS, "tx_q3" }, -+ { 8, BGMAC_TX_Q3_OCTETS, "tx_q3_octets" }, -+ { 8, BGMAC_RX_GOOD_OCTETS, "rx_good_octets" }, -+ { 4, BGMAC_RX_GOOD_PKTS, "rx_good" }, -+ { 8, BGMAC_RX_OCTETS, "rx_octets" }, -+ { 4, BGMAC_RX_PKTS, "rx_pkts" }, -+ { 4, BGMAC_RX_BROADCAST_PKTS, "rx_broadcast" }, -+ { 4, BGMAC_RX_MULTICAST_PKTS, "rx_multicast" }, -+ { 4, BGMAC_RX_LEN_64, "rx_64" }, -+ { 4, BGMAC_RX_LEN_65_TO_127, "rx_65_127" }, -+ { 4, BGMAC_RX_LEN_128_TO_255, "rx_128_255" }, -+ { 4, BGMAC_RX_LEN_256_TO_511, "rx_256_511" }, -+ { 4, BGMAC_RX_LEN_512_TO_1023, "rx_512_1023" }, -+ { 4, BGMAC_RX_LEN_1024_TO_1522, "rx_1024_1522" }, -+ { 4, BGMAC_RX_LEN_1523_TO_2047, "rx_1523_2047" }, -+ { 4, BGMAC_RX_LEN_2048_TO_4095, "rx_2048_4095" }, -+ { 4, BGMAC_RX_LEN_4096_TO_8191, "rx_4096_8191" }, -+ { 4, BGMAC_RX_LEN_8192_TO_MAX, "rx_8192_max" }, -+ { 4, BGMAC_RX_JABBER_PKTS, "rx_jabber" }, -+ { 4, BGMAC_RX_OVERSIZE_PKTS, "rx_oversize" }, -+ { 4, BGMAC_RX_FRAGMENT_PKTS, "rx_fragment" }, -+ { 4, BGMAC_RX_MISSED_PKTS, "rx_missed" }, -+ { 4, BGMAC_RX_CRC_ALIGN_ERRS, "rx_crc_align" }, -+ { 4, BGMAC_RX_UNDERSIZE, "rx_undersize" }, -+ { 4, BGMAC_RX_CRC_ERRS, "rx_crc" }, -+ { 4, BGMAC_RX_ALIGN_ERRS, "rx_align" }, -+ { 4, BGMAC_RX_SYMBOL_ERRS, "rx_symbol" }, -+ { 4, BGMAC_RX_PAUSE_PKTS, "rx_pause" }, -+ { 4, BGMAC_RX_NONPAUSE_PKTS, "rx_nonpause" }, -+ { 4, BGMAC_RX_SACHANGES, "rx_sa_changes" }, -+ { 4, BGMAC_RX_UNI_PKTS, "rx_unicast" }, -+}; -+ -+#define BGMAC_STATS_LEN ARRAY_SIZE(bgmac_get_strings_stats) -+ -+static int bgmac_get_sset_count(struct net_device *dev, int string_set) -+{ -+ switch (string_set) { -+ case ETH_SS_STATS: -+ return BGMAC_STATS_LEN; -+ } -+ -+ return -EOPNOTSUPP; -+} -+ -+static void bgmac_get_strings(struct net_device *dev, u32 stringset, -+ u8 *data) -+{ -+ int i; -+ -+ if (stringset != ETH_SS_STATS) -+ return; -+ -+ for (i = 0; i < BGMAC_STATS_LEN; i++) -+ strlcpy(data + i * ETH_GSTRING_LEN, -+ bgmac_get_strings_stats[i].name, ETH_GSTRING_LEN); -+} -+ -+static void bgmac_get_ethtool_stats(struct net_device *dev, -+ struct ethtool_stats *ss, uint64_t *data) -+{ -+ struct bgmac *bgmac = netdev_priv(dev); -+ const struct bgmac_stat *s; -+ unsigned int i; -+ u64 val; -+ -+ if (!netif_running(dev)) -+ return; -+ -+ for (i = 0; i < BGMAC_STATS_LEN; i++) { -+ s = &bgmac_get_strings_stats[i]; -+ val = 0; -+ if (s->size == 8) -+ val = (u64)bgmac_read(bgmac, s->offset + 4) << 32; -+ val |= bgmac_read(bgmac, s->offset); -+ data[i] = val; -+ } -+} -+ - static int bgmac_get_settings(struct net_device *net_dev, - struct ethtool_cmd *cmd) - { -@@ -1411,6 +1532,9 @@ static void bgmac_get_drvinfo(struct net - } - - static const struct ethtool_ops bgmac_ethtool_ops = { -+ .get_strings = bgmac_get_strings, -+ .get_sset_count = bgmac_get_sset_count, -+ .get_ethtool_stats = bgmac_get_ethtool_stats, - .get_settings = bgmac_get_settings, - .set_settings = bgmac_set_settings, - .get_drvinfo = bgmac_get_drvinfo, ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -123,7 +123,7 @@ - #define BGMAC_TX_LEN_1024_TO_1522 0x334 - #define BGMAC_TX_LEN_1523_TO_2047 0x338 - #define BGMAC_TX_LEN_2048_TO_4095 0x33c --#define BGMAC_TX_LEN_4095_TO_8191 0x340 -+#define BGMAC_TX_LEN_4096_TO_8191 0x340 - #define BGMAC_TX_LEN_8192_TO_MAX 0x344 - #define BGMAC_TX_JABBER_PKTS 0x348 /* Error */ - #define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */ -@@ -166,7 +166,7 @@ - #define BGMAC_RX_LEN_1024_TO_1522 0x3e4 - #define BGMAC_RX_LEN_1523_TO_2047 0x3e8 - #define BGMAC_RX_LEN_2048_TO_4095 0x3ec --#define BGMAC_RX_LEN_4095_TO_8191 0x3f0 -+#define BGMAC_RX_LEN_4096_TO_8191 0x3f0 - #define BGMAC_RX_LEN_8192_TO_MAX 0x3f4 - #define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */ - #define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */ diff --git a/target/linux/generic/pending-4.4/070-v4.8-0003-bgmac-Maintain-some-netdev-statistics.patch b/target/linux/generic/pending-4.4/070-v4.8-0003-bgmac-Maintain-some-netdev-statistics.patch deleted file mode 100644 index 1dbe1743df..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.8-0003-bgmac-Maintain-some-netdev-statistics.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 6d490f62a4c7f11c552591bdd08eda3636aa0db9 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <f.fainelli@gmail.com> -Date: Tue, 7 Jun 2016 15:06:15 -0700 -Subject: [PATCH 3/3] bgmac: Maintain some netdev statistics - -Add a few netdev statistics to report transmitted and received bytes and -packets and a few obvious errors. - -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -246,6 +246,8 @@ err_dma_head: - - err_drop: - dev_kfree_skb(skb); -+ net_dev->stats.tx_dropped++; -+ net_dev->stats.tx_errors++; - return NETDEV_TX_OK; - } - -@@ -285,6 +287,8 @@ static void bgmac_dma_tx_free(struct bgm - DMA_TO_DEVICE); - - if (slot->skb) { -+ bgmac->net_dev->stats.tx_bytes += slot->skb->len; -+ bgmac->net_dev->stats.tx_packets++; - bytes_compl += slot->skb->len; - pkts_compl++; - -@@ -468,6 +472,7 @@ static int bgmac_dma_rx_read(struct bgma - bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", - ring->start); - put_page(virt_to_head_page(buf)); -+ bgmac->net_dev->stats.rx_errors++; - break; - } - -@@ -475,6 +480,8 @@ static int bgmac_dma_rx_read(struct bgma - bgmac_err(bgmac, "Found oversized packet at slot %d, DMA issue!\n", - ring->start); - put_page(virt_to_head_page(buf)); -+ bgmac->net_dev->stats.rx_length_errors++; -+ bgmac->net_dev->stats.rx_errors++; - break; - } - -@@ -485,6 +492,7 @@ static int bgmac_dma_rx_read(struct bgma - if (unlikely(!skb)) { - bgmac_err(bgmac, "build_skb failed\n"); - put_page(virt_to_head_page(buf)); -+ bgmac->net_dev->stats.rx_errors++; - break; - } - skb_put(skb, BGMAC_RX_FRAME_OFFSET + -@@ -494,6 +502,8 @@ static int bgmac_dma_rx_read(struct bgma - - skb_checksum_none_assert(skb); - skb->protocol = eth_type_trans(skb, bgmac->net_dev); -+ bgmac->net_dev->stats.rx_bytes += len; -+ bgmac->net_dev->stats.rx_packets++; - napi_gro_receive(&bgmac->napi, skb); - handled++; - } while (0); diff --git a/target/linux/generic/pending-4.4/070-v4.8-0004-net-ethernet-bgmac-use-phydev-from-struct-net_device.patch b/target/linux/generic/pending-4.4/070-v4.8-0004-net-ethernet-bgmac-use-phydev-from-struct-net_device.patch deleted file mode 100644 index 7ce6a09ec3..0000000000 --- a/target/linux/generic/pending-4.4/070-v4.8-0004-net-ethernet-bgmac-use-phydev-from-struct-net_device.patch +++ /dev/null @@ -1,105 +0,0 @@ -From b21fcb259313bcf7d4f73ecd5e44948995c8957c Mon Sep 17 00:00:00 2001 -From: Philippe Reynes <tremyfr@gmail.com> -Date: Sun, 19 Jun 2016 22:37:05 +0200 -Subject: [PATCH 1/2] net: ethernet: bgmac: use phydev from struct net_device - -The private structure contain a pointer to phydev, but the structure -net_device already contain such pointer. So we can remove the pointer -phydev in the private structure, and update the driver to use the -one contained in struct net_device. - -Signed-off-by: Philippe Reynes <tremyfr@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 17 ++++++----------- - drivers/net/ethernet/broadcom/bgmac.h | 1 - - 2 files changed, 6 insertions(+), 12 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1324,7 +1324,7 @@ static int bgmac_open(struct net_device - } - napi_enable(&bgmac->napi); - -- phy_start(bgmac->phy_dev); -+ phy_start(net_dev->phydev); - - netif_start_queue(net_dev); - -@@ -1337,7 +1337,7 @@ static int bgmac_stop(struct net_device - - netif_carrier_off(net_dev); - -- phy_stop(bgmac->phy_dev); -+ phy_stop(net_dev->phydev); - - napi_disable(&bgmac->napi); - bgmac_chip_intrs_off(bgmac); -@@ -1375,12 +1375,10 @@ static int bgmac_set_mac_address(struct - - static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) - { -- struct bgmac *bgmac = netdev_priv(net_dev); -- - if (!netif_running(net_dev)) - return -EINVAL; - -- return phy_mii_ioctl(bgmac->phy_dev, ifr, cmd); -+ return phy_mii_ioctl(net_dev->phydev, ifr, cmd); - } - - static const struct net_device_ops bgmac_netdev_ops = { -@@ -1523,7 +1521,7 @@ static int bgmac_get_settings(struct net - { - struct bgmac *bgmac = netdev_priv(net_dev); - -- return phy_ethtool_gset(bgmac->phy_dev, cmd); -+ return phy_ethtool_gset(net_dev->phydev, cmd); - } - - static int bgmac_set_settings(struct net_device *net_dev, -@@ -1531,7 +1529,7 @@ static int bgmac_set_settings(struct net - { - struct bgmac *bgmac = netdev_priv(net_dev); - -- return phy_ethtool_sset(bgmac->phy_dev, cmd); -+ return phy_ethtool_sset(net_dev->phydev, cmd); - } - - static void bgmac_get_drvinfo(struct net_device *net_dev, -@@ -1568,7 +1566,7 @@ static int bgmac_mii_write(struct mii_bu - static void bgmac_adjust_link(struct net_device *net_dev) - { - struct bgmac *bgmac = netdev_priv(net_dev); -- struct phy_device *phy_dev = bgmac->phy_dev; -+ struct phy_device *phy_dev = net_dev->phydev; - bool update = false; - - if (phy_dev->link) { -@@ -1612,8 +1610,6 @@ static int bgmac_fixed_phy_register(stru - return err; - } - -- bgmac->phy_dev = phy_dev; -- - return err; - } - -@@ -1666,7 +1662,6 @@ static int bgmac_mii_register(struct bgm - err = PTR_ERR(phy_dev); - goto err_unregister_bus; - } -- bgmac->phy_dev = phy_dev; - - return err; - ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -441,7 +441,6 @@ struct bgmac { - struct net_device *net_dev; - struct napi_struct napi; - struct mii_bus *mii_bus; -- struct phy_device *phy_dev; - - /* DMA */ - struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS]; diff --git a/target/linux/generic/pending-4.4/071-v4.8-0001-net-ethernet-bgmac-change-bgmac_-prints-to-dev_-prin.patch b/target/linux/generic/pending-4.4/071-v4.8-0001-net-ethernet-bgmac-change-bgmac_-prints-to-dev_-prin.patch deleted file mode 100644 index 3837b60943..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0001-net-ethernet-bgmac-change-bgmac_-prints-to-dev_-prin.patch +++ /dev/null @@ -1,407 +0,0 @@ -From d00a8281bcc962027dfe409c2f3e3f0546be9200 Mon Sep 17 00:00:00 2001 -From: Jon Mason <jon.mason@broadcom.com> -Date: Thu, 7 Jul 2016 19:08:53 -0400 -Subject: [PATCH 1/5] net: ethernet: bgmac: change bgmac_* prints to dev_* - prints - -The bgmac_* print wrappers call dev_* prints with the dev pointer from -the bcma core. In anticipation of removing the bcma requirement for -this driver, these must be changed to not reference that struct. So, -simply change all of the bgmac_* prints to their dev_* counterparts. In -some cases netdev_* prints are more appropriate, so change those as -well. - -Signed-off-by: Jon Mason <jon.mason@broadcom.com> -Acked-by: Arnd Bergmann <arnd@arndb.de> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Tested-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 103 +++++++++++++++++----------------- - drivers/net/ethernet/broadcom/bgmac.h | 14 +---- - 2 files changed, 55 insertions(+), 62 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -50,7 +50,7 @@ static bool bgmac_wait_value(struct bcma - return true; - udelay(10); - } -- pr_err("Timeout waiting for reg 0x%X\n", reg); -+ dev_err(&core->dev, "Timeout waiting for reg 0x%X\n", reg); - return false; - } - -@@ -84,8 +84,8 @@ static void bgmac_dma_tx_reset(struct bg - udelay(10); - } - if (i) -- bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n", -- ring->mmio_base, val); -+ dev_err(bgmac->dev, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n", -+ ring->mmio_base, val); - - /* Remove SUSPEND bit */ - bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0); -@@ -93,13 +93,13 @@ static void bgmac_dma_tx_reset(struct bg - ring->mmio_base + BGMAC_DMA_TX_STATUS, - BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED, - 10000)) { -- bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", -- ring->mmio_base); -+ dev_warn(bgmac->dev, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", -+ ring->mmio_base); - udelay(300); - val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); - if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED) -- bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", -- ring->mmio_base); -+ dev_err(bgmac->dev, "Reset of DMA TX ring 0x%X failed\n", -+ ring->mmio_base); - } - } - -@@ -161,7 +161,7 @@ static netdev_tx_t bgmac_dma_tx_add(stru - int i; - - if (skb->len > BGMAC_DESC_CTL1_LEN) { -- bgmac_err(bgmac, "Too long skb (%d)\n", skb->len); -+ netdev_err(bgmac->net_dev, "Too long skb (%d)\n", skb->len); - goto err_drop; - } - -@@ -174,7 +174,7 @@ static netdev_tx_t bgmac_dma_tx_add(stru - * even when ring->end overflows - */ - if (ring->end - ring->start + nr_frags + 1 >= BGMAC_TX_RING_SLOTS) { -- bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n"); -+ netdev_err(bgmac->net_dev, "TX ring is full, queue should be stopped!\n"); - netif_stop_queue(net_dev); - return NETDEV_TX_BUSY; - } -@@ -241,8 +241,8 @@ err_dma: - } - - err_dma_head: -- bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", -- ring->mmio_base); -+ netdev_err(bgmac->net_dev, "Mapping error of skb on ring 0x%X\n", -+ ring->mmio_base); - - err_drop: - dev_kfree_skb(skb); -@@ -321,8 +321,8 @@ static void bgmac_dma_rx_reset(struct bg - ring->mmio_base + BGMAC_DMA_RX_STATUS, - BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED, - 10000)) -- bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", -- ring->mmio_base); -+ dev_err(bgmac->dev, "Reset of ring 0x%X RX failed\n", -+ ring->mmio_base); - } - - static void bgmac_dma_rx_enable(struct bgmac *bgmac, -@@ -374,7 +374,7 @@ static int bgmac_dma_rx_skb_for_slot(str - dma_addr = dma_map_single(dma_dev, buf + BGMAC_RX_BUF_OFFSET, - BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dma_dev, dma_addr)) { -- bgmac_err(bgmac, "DMA mapping error\n"); -+ netdev_err(bgmac->net_dev, "DMA mapping error\n"); - put_page(virt_to_head_page(buf)); - return -ENOMEM; - } -@@ -469,16 +469,16 @@ static int bgmac_dma_rx_read(struct bgma - - /* Check for poison and drop or pass the packet */ - if (len == 0xdead && flags == 0xbeef) { -- bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", -- ring->start); -+ netdev_err(bgmac->net_dev, "Found poisoned packet at slot %d, DMA issue!\n", -+ ring->start); - put_page(virt_to_head_page(buf)); - bgmac->net_dev->stats.rx_errors++; - break; - } - - if (len > BGMAC_RX_ALLOC_SIZE) { -- bgmac_err(bgmac, "Found oversized packet at slot %d, DMA issue!\n", -- ring->start); -+ netdev_err(bgmac->net_dev, "Found oversized packet at slot %d, DMA issue!\n", -+ ring->start); - put_page(virt_to_head_page(buf)); - bgmac->net_dev->stats.rx_length_errors++; - bgmac->net_dev->stats.rx_errors++; -@@ -490,7 +490,7 @@ static int bgmac_dma_rx_read(struct bgma - - skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE); - if (unlikely(!skb)) { -- bgmac_err(bgmac, "build_skb failed\n"); -+ netdev_err(bgmac->net_dev, "build_skb failed\n"); - put_page(virt_to_head_page(buf)); - bgmac->net_dev->stats.rx_errors++; - break; -@@ -644,7 +644,7 @@ static int bgmac_dma_alloc(struct bgmac - BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base)); - - if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) { -- bgmac_err(bgmac, "Core does not report 64-bit DMA\n"); -+ dev_err(bgmac->dev, "Core does not report 64-bit DMA\n"); - return -ENOTSUPP; - } - -@@ -658,8 +658,8 @@ static int bgmac_dma_alloc(struct bgmac - &ring->dma_base, - GFP_KERNEL); - if (!ring->cpu_base) { -- bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n", -- ring->mmio_base); -+ dev_err(bgmac->dev, "Allocation of TX ring 0x%X failed\n", -+ ring->mmio_base); - goto err_dma_free; - } - -@@ -683,8 +683,8 @@ static int bgmac_dma_alloc(struct bgmac - &ring->dma_base, - GFP_KERNEL); - if (!ring->cpu_base) { -- bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n", -- ring->mmio_base); -+ dev_err(bgmac->dev, "Allocation of RX ring 0x%X failed\n", -+ ring->mmio_base); - err = -ENOMEM; - goto err_dma_free; - } -@@ -803,8 +803,8 @@ static u16 bgmac_phy_read(struct bgmac * - bcma_write32(core, phy_access_addr, tmp); - - if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { -- bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n", -- phyaddr, reg); -+ dev_err(bgmac->dev, "Reading PHY %d register 0x%X failed\n", -+ phyaddr, reg); - return 0xffff; - } - -@@ -836,7 +836,7 @@ static int bgmac_phy_write(struct bgmac - - bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO); - if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) -- bgmac_warn(bgmac, "Error setting MDIO int\n"); -+ dev_warn(bgmac->dev, "Error setting MDIO int\n"); - - tmp = BGMAC_PA_START; - tmp |= BGMAC_PA_WRITE; -@@ -846,8 +846,8 @@ static int bgmac_phy_write(struct bgmac - bcma_write32(core, phy_access_addr, tmp); - - if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { -- bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", -- phyaddr, reg); -+ dev_err(bgmac->dev, "Writing to PHY %d register 0x%X failed\n", -+ phyaddr, reg); - return -ETIMEDOUT; - } - -@@ -900,7 +900,7 @@ static void bgmac_phy_reset(struct bgmac - bgmac_phy_write(bgmac, bgmac->phyaddr, MII_BMCR, BMCR_RESET); - udelay(100); - if (bgmac_phy_read(bgmac, bgmac->phyaddr, MII_BMCR) & BMCR_RESET) -- bgmac_err(bgmac, "PHY reset failed\n"); -+ dev_err(bgmac->dev, "PHY reset failed\n"); - bgmac_phy_init(bgmac); - } - -@@ -1001,7 +1001,8 @@ static void bgmac_mac_speed(struct bgmac - set |= BGMAC_CMDCFG_ES_2500; - break; - default: -- bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed); -+ dev_err(bgmac->dev, "Unsupported speed: %d\n", -+ bgmac->mac_speed); - } - - if (bgmac->mac_duplex == DUPLEX_HALF) -@@ -1100,8 +1101,8 @@ static void bgmac_chip_reset(struct bgma - - if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) { - if (kstrtou8(buf, 0, &et_swtype)) -- bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", -- buf); -+ dev_err(bgmac->dev, "Failed to parse et_swtype (%s)\n", -+ buf); - et_swtype &= 0x0f; - et_swtype <<= 4; - sw_type = et_swtype; -@@ -1264,7 +1265,7 @@ static irqreturn_t bgmac_interrupt(int i - - int_status &= ~(BGMAC_IS_TX0 | BGMAC_IS_RX); - if (int_status) -- bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", int_status); -+ dev_err(bgmac->dev, "Unknown IRQs: 0x%08X\n", int_status); - - /* Disable new interrupts until handling existing ones */ - bgmac_chip_intrs_off(bgmac); -@@ -1318,7 +1319,7 @@ static int bgmac_open(struct net_device - err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, - KBUILD_MODNAME, net_dev); - if (err < 0) { -- bgmac_err(bgmac, "IRQ request error: %d!\n", err); -+ dev_err(bgmac->dev, "IRQ request error: %d!\n", err); - bgmac_dma_cleanup(bgmac); - return err; - } -@@ -1599,14 +1600,14 @@ static int bgmac_fixed_phy_register(stru - - phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, -1, NULL); - if (!phy_dev || IS_ERR(phy_dev)) { -- bgmac_err(bgmac, "Failed to register fixed PHY device\n"); -+ dev_err(bgmac->dev, "Failed to register fixed PHY device\n"); - return -ENODEV; - } - - err = phy_connect_direct(bgmac->net_dev, phy_dev, bgmac_adjust_link, - PHY_INTERFACE_MODE_MII); - if (err) { -- bgmac_err(bgmac, "Connecting PHY failed\n"); -+ dev_err(bgmac->dev, "Connecting PHY failed\n"); - return err; - } - -@@ -1646,7 +1647,7 @@ static int bgmac_mii_register(struct bgm - - err = mdiobus_register(mii_bus); - if (err) { -- bgmac_err(bgmac, "Registration of mii bus failed\n"); -+ dev_err(bgmac->dev, "Registration of mii bus failed\n"); - goto err_free_irq; - } - -@@ -1658,7 +1659,7 @@ static int bgmac_mii_register(struct bgm - phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link, - PHY_INTERFACE_MODE_MII); - if (IS_ERR(phy_dev)) { -- bgmac_err(bgmac, "PHY connecton failed\n"); -+ dev_err(bgmac->dev, "PHY connecton failed\n"); - err = PTR_ERR(phy_dev); - goto err_unregister_bus; - } -@@ -1707,7 +1708,8 @@ static int bgmac_probe(struct bcma_devic - mac = sprom->et2mac; - break; - default: -- pr_err("Unsupported core_unit %d\n", core->core_unit); -+ dev_err(&core->dev, "Unsupported core_unit %d\n", -+ core->core_unit); - return -ENOTSUPP; - } - -@@ -1730,6 +1732,7 @@ static int bgmac_probe(struct bcma_devic - net_dev->irq = core->irq; - net_dev->ethtool_ops = &bgmac_ethtool_ops; - bgmac = netdev_priv(net_dev); -+ bgmac->dev = &core->dev; - bgmac->net_dev = net_dev; - bgmac->core = core; - bcma_set_drvdata(core, bgmac); -@@ -1741,7 +1744,7 @@ static int bgmac_probe(struct bcma_devic - /* On BCM4706 we need common core to access PHY */ - if (core->id.id == BCMA_CORE_4706_MAC_GBIT && - !core->bus->drv_gmac_cmn.core) { -- bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n"); -+ dev_err(bgmac->dev, "GMAC CMN core not found (required for BCM4706)\n"); - err = -ENODEV; - goto err_netdev_free; - } -@@ -1760,15 +1763,15 @@ static int bgmac_probe(struct bcma_devic - } - bgmac->phyaddr &= BGMAC_PHY_MASK; - if (bgmac->phyaddr == BGMAC_PHY_MASK) { -- bgmac_err(bgmac, "No PHY found\n"); -+ dev_err(bgmac->dev, "No PHY found\n"); - err = -ENODEV; - goto err_netdev_free; - } -- bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr, -- bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); -+ dev_info(bgmac->dev, "Found PHY addr: %d%s\n", bgmac->phyaddr, -+ bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); - - if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { -- bgmac_err(bgmac, "PCI setup not implemented\n"); -+ dev_err(bgmac->dev, "PCI setup not implemented\n"); - err = -ENOTSUPP; - goto err_netdev_free; - } -@@ -1797,7 +1800,7 @@ static int bgmac_probe(struct bcma_devic - - err = bgmac_dma_alloc(bgmac); - if (err) { -- bgmac_err(bgmac, "Unable to alloc memory for DMA\n"); -+ dev_err(bgmac->dev, "Unable to alloc memory for DMA\n"); - goto err_netdev_free; - } - -@@ -1811,16 +1814,16 @@ static int bgmac_probe(struct bcma_devic - bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & - BGMAC_BFL_ENETROBO); - if (bgmac->has_robosw) -- bgmac_warn(bgmac, "Support for Roboswitch not implemented\n"); -+ dev_warn(bgmac->dev, "Support for Roboswitch not implemented\n"); - - if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) -- bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n"); -+ dev_warn(bgmac->dev, "Support for ADMtek ethernet switch not implemented\n"); - - netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); - - err = bgmac_mii_register(bgmac); - if (err) { -- bgmac_err(bgmac, "Cannot register MDIO\n"); -+ dev_err(bgmac->dev, "Cannot connect to phy\n"); - goto err_dma_free; - } - -@@ -1830,7 +1833,7 @@ static int bgmac_probe(struct bcma_devic - - err = register_netdev(bgmac->net_dev); - if (err) { -- bgmac_err(bgmac, "Cannot register net device\n"); -+ dev_err(bgmac->dev, "Cannot register net device\n"); - goto err_mii_unregister; - } - ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -1,17 +1,6 @@ - #ifndef _BGMAC_H - #define _BGMAC_H - --#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -- --#define bgmac_err(bgmac, fmt, ...) \ -- dev_err(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) --#define bgmac_warn(bgmac, fmt, ...) \ -- dev_warn(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) --#define bgmac_info(bgmac, fmt, ...) \ -- dev_info(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) --#define bgmac_dbg(bgmac, fmt, ...) \ -- dev_dbg(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) -- - #include <linux/bcma/bcma.h> - #include <linux/brcmphy.h> - #include <linux/netdevice.h> -@@ -438,6 +427,8 @@ struct bgmac_rx_header { - struct bgmac { - struct bcma_device *core; - struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */ -+ -+ struct device *dev; - struct net_device *net_dev; - struct napi_struct napi; - struct mii_bus *mii_bus; -@@ -489,5 +480,4 @@ static inline void bgmac_set(struct bgma - { - bgmac_maskset(bgmac, offset, ~0, set); - } -- - #endif /* _BGMAC_H */ diff --git a/target/linux/generic/pending-4.4/071-v4.8-0002-net-ethernet-bgmac-add-dma_dev-pointer.patch b/target/linux/generic/pending-4.4/071-v4.8-0002-net-ethernet-bgmac-add-dma_dev-pointer.patch deleted file mode 100644 index dd5b8772e3..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0002-net-ethernet-bgmac-add-dma_dev-pointer.patch +++ /dev/null @@ -1,112 +0,0 @@ -From a0b68486f6f680c7c0352a47c60042d7d95ffd87 Mon Sep 17 00:00:00 2001 -From: Jon Mason <jon.mason@broadcom.com> -Date: Thu, 7 Jul 2016 19:08:54 -0400 -Subject: [PATCH 2/5] net: ethernet: bgmac: add dma_dev pointer - -The dma buffer allocation, etc references a dma_dev device pointer from -the bcma core. In anticipation of removing the bcma requirement for -this driver, these must be changed to not reference that struct. Add a -dma_dev device pointer to the bgmac stuct and reference that instead. - -Signed-off-by: Jon Mason <jon.mason@broadcom.com> -Acked-by: Arnd Bergmann <arnd@arndb.de> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Tested-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 17 +++++++++-------- - drivers/net/ethernet/broadcom/bgmac.h | 1 + - 2 files changed, 10 insertions(+), 8 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -152,7 +152,7 @@ static netdev_tx_t bgmac_dma_tx_add(stru - struct bgmac_dma_ring *ring, - struct sk_buff *skb) - { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - struct net_device *net_dev = bgmac->net_dev; - int index = ring->end % BGMAC_TX_RING_SLOTS; - struct bgmac_slot_info *slot = &ring->slots[index]; -@@ -254,7 +254,7 @@ err_drop: - /* Free transmitted packets */ - static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) - { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - int empty_slot; - bool freed = false; - unsigned bytes_compl = 0, pkts_compl = 0; -@@ -355,7 +355,7 @@ static void bgmac_dma_rx_enable(struct b - static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, - struct bgmac_slot_info *slot) - { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - dma_addr_t dma_addr; - struct bgmac_rx_header *rx; - void *buf; -@@ -444,7 +444,7 @@ static int bgmac_dma_rx_read(struct bgma - end_slot /= sizeof(struct bgmac_dma_desc); - - while (ring->start != end_slot) { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - struct bgmac_slot_info *slot = &ring->slots[ring->start]; - struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET; - struct sk_buff *skb; -@@ -547,7 +547,7 @@ static bool bgmac_dma_unaligned(struct b - static void bgmac_dma_tx_ring_free(struct bgmac *bgmac, - struct bgmac_dma_ring *ring) - { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - struct bgmac_dma_desc *dma_desc = ring->cpu_base; - struct bgmac_slot_info *slot; - int i; -@@ -573,7 +573,7 @@ static void bgmac_dma_tx_ring_free(struc - static void bgmac_dma_rx_ring_free(struct bgmac *bgmac, - struct bgmac_dma_ring *ring) - { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - struct bgmac_slot_info *slot; - int i; - -@@ -594,7 +594,7 @@ static void bgmac_dma_ring_desc_free(str - struct bgmac_dma_ring *ring, - int num_slots) - { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - int size; - - if (!ring->cpu_base) -@@ -632,7 +632,7 @@ static void bgmac_dma_free(struct bgmac - - static int bgmac_dma_alloc(struct bgmac *bgmac) - { -- struct device *dma_dev = bgmac->core->dma_dev; -+ struct device *dma_dev = bgmac->dma_dev; - struct bgmac_dma_ring *ring; - static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, - BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, }; -@@ -1733,6 +1733,7 @@ static int bgmac_probe(struct bcma_devic - net_dev->ethtool_ops = &bgmac_ethtool_ops; - bgmac = netdev_priv(net_dev); - bgmac->dev = &core->dev; -+ bgmac->dma_dev = core->dma_dev; - bgmac->net_dev = net_dev; - bgmac->core = core; - bcma_set_drvdata(core, bgmac); ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -429,6 +429,7 @@ struct bgmac { - struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */ - - struct device *dev; -+ struct device *dma_dev; - struct net_device *net_dev; - struct napi_struct napi; - struct mii_bus *mii_bus; diff --git a/target/linux/generic/pending-4.4/071-v4.8-0003-net-ethernet-bgmac-move-BCMA-MDIO-Phy-code-into-a-se.patch b/target/linux/generic/pending-4.4/071-v4.8-0003-net-ethernet-bgmac-move-BCMA-MDIO-Phy-code-into-a-se.patch deleted file mode 100644 index bc7b246cc1..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0003-net-ethernet-bgmac-move-BCMA-MDIO-Phy-code-into-a-se.patch +++ /dev/null @@ -1,676 +0,0 @@ -From 55954f3bfdacc5908515b0c306cea23e77fab740 Mon Sep 17 00:00:00 2001 -From: Jon Mason <jon.mason@broadcom.com> -Date: Thu, 7 Jul 2016 19:08:55 -0400 -Subject: [PATCH 3/5] net: ethernet: bgmac: move BCMA MDIO Phy code into a - separate file - -Move the BCMA MDIO phy into a separate file, as it is very tightly -coupled with the BCMA bus. This will help with the upcoming BCMA -removal from the bgmac driver. Optimally, this should be moved into -phy drivers, but it is too tightly coupled with the bgmac driver to -effectively move it without more changes to the driver. - -Note: the phy_reset was intentionally removed, as the mdio phy subsystem -automatically resets the phy if a reset function pointer is present. In -addition to the moving of the driver, this reset function is added. - -Signed-off-by: Jon Mason <jon.mason@broadcom.com> -Acked-by: Arnd Bergmann <arnd@arndb.de> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Tested-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/Makefile | 2 +- - drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 264 ++++++++++++++++++++++++ - drivers/net/ethernet/broadcom/bgmac.c | 246 +++------------------- - drivers/net/ethernet/broadcom/bgmac.h | 3 + - 4 files changed, 298 insertions(+), 217 deletions(-) - create mode 100644 drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c - ---- a/drivers/net/ethernet/broadcom/Makefile -+++ b/drivers/net/ethernet/broadcom/Makefile -@@ -10,6 +10,6 @@ obj-$(CONFIG_CNIC) += cnic.o - obj-$(CONFIG_BNX2X) += bnx2x/ - obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o - obj-$(CONFIG_TIGON3) += tg3.o --obj-$(CONFIG_BGMAC) += bgmac.o -+obj-$(CONFIG_BGMAC) += bgmac.o bgmac-bcma-mdio.o - obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o - obj-$(CONFIG_BNXT) += bnxt/ ---- /dev/null -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c -@@ -0,0 +1,275 @@ -+/* -+ * Driver for (BCM4706)? GBit MAC core on BCMA bus. -+ * -+ * Copyright (C) 2012 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include <linux/bcma/bcma.h> -+#include <linux/brcmphy.h> -+#include "bgmac.h" -+ -+struct bcma_mdio { -+ struct bcma_device *core; -+ u8 phyaddr; -+}; -+ -+static bool bcma_mdio_wait_value(struct bcma_device *core, u16 reg, u32 mask, -+ u32 value, int timeout) -+{ -+ u32 val; -+ int i; -+ -+ for (i = 0; i < timeout / 10; i++) { -+ val = bcma_read32(core, reg); -+ if ((val & mask) == value) -+ return true; -+ udelay(10); -+ } -+ dev_err(&core->dev, "Timeout waiting for reg 0x%X\n", reg); -+ return false; -+} -+ -+/************************************************** -+ * PHY ops -+ **************************************************/ -+ -+static u16 bcma_mdio_phy_read(struct bcma_mdio *bcma_mdio, u8 phyaddr, u8 reg) -+{ -+ struct bcma_device *core; -+ u16 phy_access_addr; -+ u16 phy_ctl_addr; -+ u32 tmp; -+ -+ BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK); -+ BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK); -+ BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT); -+ BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK); -+ BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT); -+ BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE); -+ BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START); -+ BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK); -+ BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK); -+ BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); -+ BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); -+ -+ if (bcma_mdio->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ core = bcma_mdio->core->bus->drv_gmac_cmn.core; -+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; -+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; -+ } else { -+ core = bcma_mdio->core; -+ phy_access_addr = BGMAC_PHY_ACCESS; -+ phy_ctl_addr = BGMAC_PHY_CNTL; -+ } -+ -+ tmp = bcma_read32(core, phy_ctl_addr); -+ tmp &= ~BGMAC_PC_EPA_MASK; -+ tmp |= phyaddr; -+ bcma_write32(core, phy_ctl_addr, tmp); -+ -+ tmp = BGMAC_PA_START; -+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; -+ tmp |= reg << BGMAC_PA_REG_SHIFT; -+ bcma_write32(core, phy_access_addr, tmp); -+ -+ if (!bcma_mdio_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, -+ 1000)) { -+ dev_err(&core->dev, "Reading PHY %d register 0x%X failed\n", -+ phyaddr, reg); -+ return 0xffff; -+ } -+ -+ return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK; -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ -+static int bcma_mdio_phy_write(struct bcma_mdio *bcma_mdio, u8 phyaddr, u8 reg, -+ u16 value) -+{ -+ struct bcma_device *core; -+ u16 phy_access_addr; -+ u16 phy_ctl_addr; -+ u32 tmp; -+ -+ if (bcma_mdio->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ core = bcma_mdio->core->bus->drv_gmac_cmn.core; -+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; -+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; -+ } else { -+ core = bcma_mdio->core; -+ phy_access_addr = BGMAC_PHY_ACCESS; -+ phy_ctl_addr = BGMAC_PHY_CNTL; -+ } -+ -+ tmp = bcma_read32(core, phy_ctl_addr); -+ tmp &= ~BGMAC_PC_EPA_MASK; -+ tmp |= phyaddr; -+ bcma_write32(core, phy_ctl_addr, tmp); -+ -+ bcma_write32(bcma_mdio->core, BGMAC_INT_STATUS, BGMAC_IS_MDIO); -+ if (bcma_read32(bcma_mdio->core, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) -+ dev_warn(&core->dev, "Error setting MDIO int\n"); -+ -+ tmp = BGMAC_PA_START; -+ tmp |= BGMAC_PA_WRITE; -+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; -+ tmp |= reg << BGMAC_PA_REG_SHIFT; -+ tmp |= value; -+ bcma_write32(core, phy_access_addr, tmp); -+ -+ if (!bcma_mdio_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, -+ 1000)) { -+ dev_err(&core->dev, "Writing to PHY %d register 0x%X failed\n", -+ phyaddr, reg); -+ return -ETIMEDOUT; -+ } -+ -+ return 0; -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ -+static void bcma_mdio_phy_init(struct bcma_mdio *bcma_mdio) -+{ -+ struct bcma_chipinfo *ci = &bcma_mdio->core->bus->chipinfo; -+ u8 i; -+ -+ if (ci->id == BCMA_CHIP_ID_BCM5356) { -+ for (i = 0; i < 5; i++) { -+ bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x008b); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x15, 0x0100); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x12, 0x2aaa); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b); -+ } -+ } -+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || -+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || -+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { -+ struct bcma_drv_cc *cc = &bcma_mdio->core->bus->drv_cc; -+ -+ bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); -+ bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); -+ for (i = 0; i < 5; i++) { -+ bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x5284); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x0010); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x5296); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x1073); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x9073); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x52b6); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x9273); -+ bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b); -+ } -+ } -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ -+static int bcma_mdio_phy_reset(struct mii_bus *bus) -+{ -+ struct bcma_mdio *bcma_mdio = bus->priv; -+ u8 phyaddr = bcma_mdio->phyaddr; -+ -+ if (bcma_mdio->phyaddr == BGMAC_PHY_NOREGS) -+ return 0; -+ -+ bcma_mdio_phy_write(bcma_mdio, phyaddr, MII_BMCR, BMCR_RESET); -+ udelay(100); -+ if (bcma_mdio_phy_read(bcma_mdio, phyaddr, MII_BMCR) & BMCR_RESET) -+ dev_err(&bcma_mdio->core->dev, "PHY reset failed\n"); -+ bcma_mdio_phy_init(bcma_mdio); -+ -+ return 0; -+} -+ -+/************************************************** -+ * MII -+ **************************************************/ -+ -+static int bcma_mdio_mii_read(struct mii_bus *bus, int mii_id, int regnum) -+{ -+ return bcma_mdio_phy_read(bus->priv, mii_id, regnum); -+} -+ -+static int bcma_mdio_mii_write(struct mii_bus *bus, int mii_id, int regnum, -+ u16 value) -+{ -+ return bcma_mdio_phy_write(bus->priv, mii_id, regnum, value); -+} -+ -+struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr) -+{ -+ struct bcma_mdio *bcma_mdio; -+ struct mii_bus *mii_bus; -+ int i, err; -+ -+ bcma_mdio = kzalloc(sizeof(*bcma_mdio), GFP_KERNEL); -+ if (!bcma_mdio) -+ return ERR_PTR(-ENOMEM); -+ -+ mii_bus = mdiobus_alloc(); -+ if (!mii_bus) { -+ err = -ENOMEM; -+ goto err; -+ } -+ -+ mii_bus->name = "bcma_mdio mii bus"; -+ sprintf(mii_bus->id, "%s-%d-%d", "bcma_mdio", core->bus->num, -+ core->core_unit); -+ mii_bus->priv = bcma_mdio; -+ mii_bus->read = bcma_mdio_mii_read; -+ mii_bus->write = bcma_mdio_mii_write; -+ mii_bus->reset = bcma_mdio_phy_reset; -+ mii_bus->parent = &core->dev; -+ mii_bus->phy_mask = ~(1 << phyaddr); -+ -+ mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); -+ if (!mii_bus->irq) { -+ err = -ENOMEM; -+ goto err_free_bus; -+ } -+ for (i = 0; i < PHY_MAX_ADDR; i++) -+ mii_bus->irq[i] = PHY_POLL; -+ -+ bcma_mdio->core = core; -+ bcma_mdio->phyaddr = phyaddr; -+ -+ err = mdiobus_register(mii_bus); -+ if (err) { -+ dev_err(&core->dev, "Registration of mii bus failed\n"); -+ goto err_free_irq; -+ } -+ -+ return mii_bus; -+ -+err_free_irq: -+ kfree(mii_bus->irq); -+err_free_bus: -+ mdiobus_free(mii_bus); -+err: -+ kfree(bcma_mdio); -+ return ERR_PTR(err); -+} -+ -+void bcma_mdio_mii_unregister(struct mii_bus *mii_bus) -+{ -+ struct bcma_mdio *bcma_mdio; -+ -+ if (!mii_bus) -+ return; -+ -+ bcma_mdio = mii_bus->priv; -+ -+ mdiobus_unregister(mii_bus); -+ kfree(mii_bus->irq); -+ mdiobus_free(mii_bus); -+ kfree(bcma_mdio); -+} -+ -+MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki"); -+MODULE_LICENSE("GPL"); ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -759,150 +759,6 @@ error: - return err; - } - --/************************************************** -- * PHY ops -- **************************************************/ -- --static u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) --{ -- struct bcma_device *core; -- u16 phy_access_addr; -- u16 phy_ctl_addr; -- u32 tmp; -- -- BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK); -- BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK); -- BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT); -- BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK); -- BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT); -- BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE); -- BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START); -- BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK); -- BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK); -- BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); -- BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); -- -- if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -- core = bgmac->core->bus->drv_gmac_cmn.core; -- phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; -- phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; -- } else { -- core = bgmac->core; -- phy_access_addr = BGMAC_PHY_ACCESS; -- phy_ctl_addr = BGMAC_PHY_CNTL; -- } -- -- tmp = bcma_read32(core, phy_ctl_addr); -- tmp &= ~BGMAC_PC_EPA_MASK; -- tmp |= phyaddr; -- bcma_write32(core, phy_ctl_addr, tmp); -- -- tmp = BGMAC_PA_START; -- tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; -- tmp |= reg << BGMAC_PA_REG_SHIFT; -- bcma_write32(core, phy_access_addr, tmp); -- -- if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { -- dev_err(bgmac->dev, "Reading PHY %d register 0x%X failed\n", -- phyaddr, reg); -- return 0xffff; -- } -- -- return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK; --} -- --/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ --static int bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) --{ -- struct bcma_device *core; -- u16 phy_access_addr; -- u16 phy_ctl_addr; -- u32 tmp; -- -- if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -- core = bgmac->core->bus->drv_gmac_cmn.core; -- phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; -- phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; -- } else { -- core = bgmac->core; -- phy_access_addr = BGMAC_PHY_ACCESS; -- phy_ctl_addr = BGMAC_PHY_CNTL; -- } -- -- tmp = bcma_read32(core, phy_ctl_addr); -- tmp &= ~BGMAC_PC_EPA_MASK; -- tmp |= phyaddr; -- bcma_write32(core, phy_ctl_addr, tmp); -- -- bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO); -- if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) -- dev_warn(bgmac->dev, "Error setting MDIO int\n"); -- -- tmp = BGMAC_PA_START; -- tmp |= BGMAC_PA_WRITE; -- tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; -- tmp |= reg << BGMAC_PA_REG_SHIFT; -- tmp |= value; -- bcma_write32(core, phy_access_addr, tmp); -- -- if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { -- dev_err(bgmac->dev, "Writing to PHY %d register 0x%X failed\n", -- phyaddr, reg); -- return -ETIMEDOUT; -- } -- -- return 0; --} -- --/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ --static void bgmac_phy_init(struct bgmac *bgmac) --{ -- struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; -- struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; -- u8 i; -- -- if (ci->id == BCMA_CHIP_ID_BCM5356) { -- for (i = 0; i < 5; i++) { -- bgmac_phy_write(bgmac, i, 0x1f, 0x008b); -- bgmac_phy_write(bgmac, i, 0x15, 0x0100); -- bgmac_phy_write(bgmac, i, 0x1f, 0x000f); -- bgmac_phy_write(bgmac, i, 0x12, 0x2aaa); -- bgmac_phy_write(bgmac, i, 0x1f, 0x000b); -- } -- } -- if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || -- (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || -- (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { -- bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); -- bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); -- for (i = 0; i < 5; i++) { -- bgmac_phy_write(bgmac, i, 0x1f, 0x000f); -- bgmac_phy_write(bgmac, i, 0x16, 0x5284); -- bgmac_phy_write(bgmac, i, 0x1f, 0x000b); -- bgmac_phy_write(bgmac, i, 0x17, 0x0010); -- bgmac_phy_write(bgmac, i, 0x1f, 0x000f); -- bgmac_phy_write(bgmac, i, 0x16, 0x5296); -- bgmac_phy_write(bgmac, i, 0x17, 0x1073); -- bgmac_phy_write(bgmac, i, 0x17, 0x9073); -- bgmac_phy_write(bgmac, i, 0x16, 0x52b6); -- bgmac_phy_write(bgmac, i, 0x17, 0x9273); -- bgmac_phy_write(bgmac, i, 0x1f, 0x000b); -- } -- } --} -- --/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ --static void bgmac_phy_reset(struct bgmac *bgmac) --{ -- if (bgmac->phyaddr == BGMAC_PHY_NOREGS) -- return; -- -- bgmac_phy_write(bgmac, bgmac->phyaddr, MII_BMCR, BMCR_RESET); -- udelay(100); -- if (bgmac_phy_read(bgmac, bgmac->phyaddr, MII_BMCR) & BMCR_RESET) -- dev_err(bgmac->dev, "PHY reset failed\n"); -- bgmac_phy_init(bgmac); --} - - /************************************************** - * Chip ops -@@ -1159,7 +1015,8 @@ static void bgmac_chip_reset(struct bgma - else - bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE); - bgmac_miiconfig(bgmac); -- bgmac_phy_init(bgmac); -+ if (bgmac->mii_bus) -+ bgmac->mii_bus->reset(bgmac->mii_bus); - - netdev_reset_queue(bgmac->net_dev); - } -@@ -1553,17 +1410,6 @@ static const struct ethtool_ops bgmac_et - * MII - **************************************************/ - --static int bgmac_mii_read(struct mii_bus *bus, int mii_id, int regnum) --{ -- return bgmac_phy_read(bus->priv, mii_id, regnum); --} -- --static int bgmac_mii_write(struct mii_bus *bus, int mii_id, int regnum, -- u16 value) --{ -- return bgmac_phy_write(bus->priv, mii_id, regnum, value); --} -- - static void bgmac_adjust_link(struct net_device *net_dev) - { - struct bgmac *bgmac = netdev_priv(net_dev); -@@ -1588,7 +1434,7 @@ static void bgmac_adjust_link(struct net - } - } - --static int bgmac_fixed_phy_register(struct bgmac *bgmac) -+static int bgmac_phy_connect_direct(struct bgmac *bgmac) - { - struct fixed_phy_status fphy_status = { - .link = 1, -@@ -1614,81 +1460,24 @@ static int bgmac_fixed_phy_register(stru - return err; - } - --static int bgmac_mii_register(struct bgmac *bgmac) -+static int bgmac_phy_connect(struct bgmac *bgmac) - { -- struct mii_bus *mii_bus; - struct phy_device *phy_dev; - char bus_id[MII_BUS_ID_SIZE + 3]; -- int i, err = 0; -- -- if (bgmac_is_bcm4707_family(bgmac)) -- return bgmac_fixed_phy_register(bgmac); -- -- mii_bus = mdiobus_alloc(); -- if (!mii_bus) -- return -ENOMEM; -- -- mii_bus->name = "bgmac mii bus"; -- sprintf(mii_bus->id, "%s-%d-%d", "bgmac", bgmac->core->bus->num, -- bgmac->core->core_unit); -- mii_bus->priv = bgmac; -- mii_bus->read = bgmac_mii_read; -- mii_bus->write = bgmac_mii_write; -- mii_bus->parent = &bgmac->core->dev; -- mii_bus->phy_mask = ~(1 << bgmac->phyaddr); -- -- mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); -- if (!mii_bus->irq) { -- err = -ENOMEM; -- goto err_free_bus; -- } -- for (i = 0; i < PHY_MAX_ADDR; i++) -- mii_bus->irq[i] = PHY_POLL; -- -- err = mdiobus_register(mii_bus); -- if (err) { -- dev_err(bgmac->dev, "Registration of mii bus failed\n"); -- goto err_free_irq; -- } -- -- bgmac->mii_bus = mii_bus; - - /* Connect to the PHY */ -- snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id, -+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, bgmac->mii_bus->id, - bgmac->phyaddr); - phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link, - PHY_INTERFACE_MODE_MII); - if (IS_ERR(phy_dev)) { - dev_err(bgmac->dev, "PHY connecton failed\n"); -- err = PTR_ERR(phy_dev); -- goto err_unregister_bus; -+ return PTR_ERR(phy_dev); - } - -- return err; -- --err_unregister_bus: -- mdiobus_unregister(mii_bus); --err_free_irq: -- kfree(mii_bus->irq); --err_free_bus: -- mdiobus_free(mii_bus); -- return err; --} -- --static void bgmac_mii_unregister(struct bgmac *bgmac) --{ -- struct mii_bus *mii_bus = bgmac->mii_bus; -- -- mdiobus_unregister(mii_bus); -- kfree(mii_bus->irq); -- mdiobus_free(mii_bus); -+ return 0; - } - --/************************************************** -- * BCMA bus ops -- **************************************************/ -- --/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ - static int bgmac_probe(struct bcma_device *core) - { - struct net_device *net_dev; -@@ -1809,9 +1598,6 @@ static int bgmac_probe(struct bcma_devic - if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0) - bgmac->int_mask &= ~BGMAC_IS_TX_MASK; - -- /* TODO: reset the external phy. Specs are needed */ -- bgmac_phy_reset(bgmac); -- - bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & - BGMAC_BFL_ENETROBO); - if (bgmac->has_robosw) -@@ -1822,10 +1608,25 @@ static int bgmac_probe(struct bcma_devic - - netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); - -- err = bgmac_mii_register(bgmac); -+ if (!bgmac_is_bcm4707_family(bgmac)) { -+ struct mii_bus *mii_bus; -+ -+ mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr); -+ if (!IS_ERR(mii_bus)) { -+ err = PTR_ERR(mii_bus); -+ goto err_dma_free; -+ } -+ -+ bgmac->mii_bus = mii_bus; -+ } -+ -+ if (!bgmac->mii_bus) -+ err = bgmac_phy_connect_direct(bgmac); -+ else -+ err = bgmac_phy_connect(bgmac); - if (err) { - dev_err(bgmac->dev, "Cannot connect to phy\n"); -- goto err_dma_free; -+ goto err_mii_unregister; - } - - net_dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; -@@ -1835,18 +1636,19 @@ static int bgmac_probe(struct bcma_devic - err = register_netdev(bgmac->net_dev); - if (err) { - dev_err(bgmac->dev, "Cannot register net device\n"); -- goto err_mii_unregister; -+ goto err_phy_disconnect; - } - - netif_carrier_off(net_dev); - - return 0; - -+err_phy_disconnect: -+ phy_disconnect(net_dev->phydev); - err_mii_unregister: -- bgmac_mii_unregister(bgmac); -+ bcma_mdio_mii_unregister(bgmac->mii_bus); - err_dma_free: - bgmac_dma_free(bgmac); -- - err_netdev_free: - bcma_set_drvdata(core, NULL); - free_netdev(net_dev); -@@ -1859,7 +1661,8 @@ static void bgmac_remove(struct bcma_dev - struct bgmac *bgmac = bcma_get_drvdata(core); - - unregister_netdev(bgmac->net_dev); -- bgmac_mii_unregister(bgmac); -+ phy_disconnect(bgmac->net_dev->phydev); -+ bcma_mdio_mii_unregister(bgmac->mii_bus); - netif_napi_del(&bgmac->napi); - bgmac_dma_free(bgmac); - bcma_set_drvdata(core, NULL); ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -456,6 +456,9 @@ struct bgmac { - bool loopback; - }; - -+struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr); -+void bcma_mdio_mii_unregister(struct mii_bus *mii_bus); -+ - static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset) - { - return bcma_read32(bgmac->core, offset); diff --git a/target/linux/generic/pending-4.4/071-v4.8-0004-net-ethernet-bgmac-convert-to-feature-flags.patch b/target/linux/generic/pending-4.4/071-v4.8-0004-net-ethernet-bgmac-convert-to-feature-flags.patch deleted file mode 100644 index 0f627919d0..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0004-net-ethernet-bgmac-convert-to-feature-flags.patch +++ /dev/null @@ -1,384 +0,0 @@ -From db791eb2970bad193b1dc95a4461b222dd22cb64 Mon Sep 17 00:00:00 2001 -From: Jon Mason <jon.mason@broadcom.com> -Date: Thu, 7 Jul 2016 19:08:56 -0400 -Subject: [PATCH 4/5] net: ethernet: bgmac: convert to feature flags - -The bgmac driver is using the bcma provides device ID and revision, as -well as the SoC ID and package, to determine which features are -necessary to enable, reset, etc in the driver. In anticipation of -removing the bcma requirement for this driver, these must be changed to -not reference that struct. In place of that, each "feature" has been -given a flag, and the flags are enabled for their respective device and -SoC. - -Signed-off-by: Jon Mason <jon.mason@broadcom.com> -Acked-by: Arnd Bergmann <arnd@arndb.de> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Tested-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 167 ++++++++++++++++++++++++---------- - drivers/net/ethernet/broadcom/bgmac.h | 21 ++++- - 2 files changed, 140 insertions(+), 48 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -109,7 +109,7 @@ static void bgmac_dma_tx_enable(struct b - u32 ctl; - - ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL); -- if (bgmac->core->id.rev >= 4) { -+ if (bgmac->feature_flags & BGMAC_FEAT_TX_MASK_SETUP) { - ctl &= ~BGMAC_DMA_TX_BL_MASK; - ctl |= BGMAC_DMA_TX_BL_128 << BGMAC_DMA_TX_BL_SHIFT; - -@@ -335,7 +335,7 @@ static void bgmac_dma_rx_enable(struct b - /* preserve ONLY bits 16-17 from current hardware value */ - ctl &= BGMAC_DMA_RX_ADDREXT_MASK; - -- if (bgmac->core->id.rev >= 4) { -+ if (bgmac->feature_flags & BGMAC_FEAT_RX_MASK_SETUP) { - ctl &= ~BGMAC_DMA_RX_BL_MASK; - ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT; - -@@ -772,14 +772,20 @@ static void bgmac_cmdcfg_maskset(struct - { - u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); - u32 new_val = (cmdcfg & mask) | set; -+ u32 cmdcfg_sr; - -- bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR(bgmac->core->id.rev)); -+ if (bgmac->feature_flags & BGMAC_FEAT_CMDCFG_SR_REV4) -+ cmdcfg_sr = BGMAC_CMDCFG_SR_REV4; -+ else -+ cmdcfg_sr = BGMAC_CMDCFG_SR_REV0; -+ -+ bgmac_set(bgmac, BGMAC_CMDCFG, cmdcfg_sr); - udelay(2); - - if (new_val != cmdcfg || force) - bgmac_write(bgmac, BGMAC_CMDCFG, new_val); - -- bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR(bgmac->core->id.rev)); -+ bgmac_mask(bgmac, BGMAC_CMDCFG, ~cmdcfg_sr); - udelay(2); - } - -@@ -808,7 +814,7 @@ static void bgmac_chip_stats_update(stru - { - int i; - -- if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) { -+ if (!(bgmac->feature_flags & BGMAC_FEAT_NO_CLR_MIB)) { - for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) - bgmac->mib_tx_regs[i] = - bgmac_read(bgmac, -@@ -827,7 +833,7 @@ static void bgmac_clear_mib(struct bgmac - { - int i; - -- if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) -+ if (bgmac->feature_flags & BGMAC_FEAT_NO_CLR_MIB) - return; - - bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR); -@@ -870,9 +876,8 @@ static void bgmac_mac_speed(struct bgmac - static void bgmac_miiconfig(struct bgmac *bgmac) - { - struct bcma_device *core = bgmac->core; -- u8 imode; - -- if (bgmac_is_bcm4707_family(bgmac)) { -+ if (bgmac->feature_flags & BGMAC_FEAT_FORCE_SPEED_2500) { - bcma_awrite32(core, BCMA_IOCTL, - bcma_aread32(core, BCMA_IOCTL) | 0x40 | - BGMAC_BCMA_IOCTL_SW_CLKEN); -@@ -880,6 +885,8 @@ static void bgmac_miiconfig(struct bgmac - bgmac->mac_duplex = DUPLEX_FULL; - bgmac_mac_speed(bgmac); - } else { -+ u8 imode; -+ - imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & - BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT; - if (imode == 0 || imode == 1) { -@@ -894,9 +901,7 @@ static void bgmac_miiconfig(struct bgmac - static void bgmac_chip_reset(struct bgmac *bgmac) - { - struct bcma_device *core = bgmac->core; -- struct bcma_bus *bus = core->bus; -- struct bcma_chipinfo *ci = &bus->chipinfo; -- u32 flags; -+ u32 cmdcfg_sr; - u32 iost; - int i; - -@@ -919,15 +924,12 @@ static void bgmac_chip_reset(struct bgma - } - - iost = bcma_aread32(core, BCMA_IOST); -- if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) || -- (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) || -- (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) -+ if (bgmac->feature_flags & BGMAC_FEAT_IOST_ATTACHED) - iost &= ~BGMAC_BCMA_IOST_ATTACHED; - - /* 3GMAC: for BCM4707 & BCM47094, only do core reset at bgmac_probe() */ -- if (ci->id != BCMA_CHIP_ID_BCM4707 && -- ci->id != BCMA_CHIP_ID_BCM47094) { -- flags = 0; -+ if (!(bgmac->feature_flags & BGMAC_FEAT_NO_RESET)) { -+ u32 flags = 0; - if (iost & BGMAC_BCMA_IOST_ATTACHED) { - flags = BGMAC_BCMA_IOCTL_SW_CLKEN; - if (!bgmac->has_robosw) -@@ -937,7 +939,7 @@ static void bgmac_chip_reset(struct bgma - } - - /* Request Misc PLL for corerev > 2 */ -- if (core->id.rev > 2 && !bgmac_is_bcm4707_family(bgmac)) { -+ if (bgmac->feature_flags & BGMAC_FEAT_MISC_PLL_REQ) { - bgmac_set(bgmac, BCMA_CLKCTLST, - BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ); - bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, -@@ -946,9 +948,7 @@ static void bgmac_chip_reset(struct bgma - 1000); - } - -- if (ci->id == BCMA_CHIP_ID_BCM5357 || -- ci->id == BCMA_CHIP_ID_BCM4749 || -- ci->id == BCMA_CHIP_ID_BCM53572) { -+ if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_PHY) { - struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; - u8 et_swtype = 0; - u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY | -@@ -962,11 +962,9 @@ static void bgmac_chip_reset(struct bgma - et_swtype &= 0x0f; - et_swtype <<= 4; - sw_type = et_swtype; -- } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM5358) { -+ } else if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_EPHYRMII) { - sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; -- } else if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) || -- (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) || -- (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) { -+ } else if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_RGMII) { - sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII | - BGMAC_CHIPCTL_1_SW_TYPE_RGMII; - } -@@ -986,6 +984,11 @@ static void bgmac_chip_reset(struct bgma - * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to - * be keps until taking MAC out of the reset. - */ -+ if (bgmac->feature_flags & BGMAC_FEAT_CMDCFG_SR_REV4) -+ cmdcfg_sr = BGMAC_CMDCFG_SR_REV4; -+ else -+ cmdcfg_sr = BGMAC_CMDCFG_SR_REV0; -+ - bgmac_cmdcfg_maskset(bgmac, - ~(BGMAC_CMDCFG_TE | - BGMAC_CMDCFG_RE | -@@ -1003,13 +1006,13 @@ static void bgmac_chip_reset(struct bgma - BGMAC_CMDCFG_PROM | - BGMAC_CMDCFG_NLC | - BGMAC_CMDCFG_CFE | -- BGMAC_CMDCFG_SR(core->id.rev), -+ cmdcfg_sr, - false); - bgmac->mac_speed = SPEED_UNKNOWN; - bgmac->mac_duplex = DUPLEX_UNKNOWN; - - bgmac_clear_mib(bgmac); -- if (core->id.id == BCMA_CORE_4706_MAC_GBIT) -+ if (bgmac->feature_flags & BGMAC_FEAT_CMN_PHY_CTL) - bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0, - BCMA_GMAC_CMN_PC_MTE); - else -@@ -1035,46 +1038,48 @@ static void bgmac_chip_intrs_off(struct - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ - static void bgmac_enable(struct bgmac *bgmac) - { -- struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; -+ u32 cmdcfg_sr; - u32 cmdcfg; - u32 mode; -- u32 rxq_ctl; -- u32 fl_ctl; -- u16 bp_clk; -- u8 mdp; -+ -+ if (bgmac->feature_flags & BGMAC_FEAT_CMDCFG_SR_REV4) -+ cmdcfg_sr = BGMAC_CMDCFG_SR_REV4; -+ else -+ cmdcfg_sr = BGMAC_CMDCFG_SR_REV0; - - cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); - bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE), -- BGMAC_CMDCFG_SR(bgmac->core->id.rev), true); -+ cmdcfg_sr, true); - udelay(2); - cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE; - bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg); - - mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> - BGMAC_DS_MM_SHIFT; -- if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0) -+ if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST || mode != 0) - bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); -- if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2) -+ if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST && mode == 2) - bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0, - BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); - -- switch (ci->id) { -- case BCMA_CHIP_ID_BCM5357: -- case BCMA_CHIP_ID_BCM4749: -- case BCMA_CHIP_ID_BCM53572: -- case BCMA_CHIP_ID_BCM4716: -- case BCMA_CHIP_ID_BCM47162: -- fl_ctl = 0x03cb04cb; -- if (ci->id == BCMA_CHIP_ID_BCM5357 || -- ci->id == BCMA_CHIP_ID_BCM4749 || -- ci->id == BCMA_CHIP_ID_BCM53572) -+ if (bgmac->feature_flags & (BGMAC_FEAT_FLW_CTRL1 | -+ BGMAC_FEAT_FLW_CTRL2)) { -+ u32 fl_ctl; -+ -+ if (bgmac->feature_flags & BGMAC_FEAT_FLW_CTRL1) - fl_ctl = 0x2300e1; -+ else -+ fl_ctl = 0x03cb04cb; -+ - bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl); - bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff); -- break; - } - -- if (!bgmac_is_bcm4707_family(bgmac)) { -+ if (bgmac->feature_flags & BGMAC_FEAT_SET_RXQ_CLK) { -+ u32 rxq_ctl; -+ u16 bp_clk; -+ u8 mdp; -+ - rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); - rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; - bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / -@@ -1606,6 +1611,74 @@ static int bgmac_probe(struct bcma_devic - if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) - dev_warn(bgmac->dev, "Support for ADMtek ethernet switch not implemented\n"); - -+ /* Feature Flags */ -+ switch (core->bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM5357: -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -+ if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47186) { -+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -+ } -+ if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM5358) -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_EPHYRMII; -+ break; -+ case BCMA_CHIP_ID_BCM53572: -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -+ if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47188) { -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -+ } -+ break; -+ case BCMA_CHIP_ID_BCM4749: -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -+ if (core->bus->chipinfo.pkg == 10) { -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -+ } -+ break; -+ case BCMA_CHIP_ID_BCM4716: -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ /* fallthrough */ -+ case BCMA_CHIP_ID_BCM47162: -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL2; -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ break; -+ /* bcm4707_family */ -+ case BCMA_CHIP_ID_BCM4707: -+ case BCMA_CHIP_ID_BCM47094: -+ case BCMA_CHIP_ID_BCM53018: -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_NO_RESET; -+ bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500; -+ break; -+ default: -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ } -+ -+ if (!bgmac_is_bcm4707_family(bgmac) && core->id.rev > 2) -+ bgmac->feature_flags |= BGMAC_FEAT_MISC_PLL_REQ; -+ -+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ bgmac->feature_flags |= BGMAC_FEAT_CMN_PHY_CTL; -+ bgmac->feature_flags |= BGMAC_FEAT_NO_CLR_MIB; -+ } -+ -+ if (core->id.rev >= 4) { -+ bgmac->feature_flags |= BGMAC_FEAT_CMDCFG_SR_REV4; -+ bgmac->feature_flags |= BGMAC_FEAT_TX_MASK_SETUP; -+ bgmac->feature_flags |= BGMAC_FEAT_RX_MASK_SETUP; -+ } -+ - netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); - - if (!bgmac_is_bcm4707_family(bgmac)) { ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -190,7 +190,6 @@ - #define BGMAC_CMDCFG_HD_SHIFT 10 - #define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */ - #define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */ --#define BGMAC_CMDCFG_SR(rev) ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) - #define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ - #define BGMAC_CMDCFG_AE 0x00400000 - #define BGMAC_CMDCFG_CFE 0x00800000 -@@ -376,6 +375,24 @@ - - #define ETHER_MAX_LEN 1518 - -+/* Feature Flags */ -+#define BGMAC_FEAT_TX_MASK_SETUP BIT(0) -+#define BGMAC_FEAT_RX_MASK_SETUP BIT(1) -+#define BGMAC_FEAT_IOST_ATTACHED BIT(2) -+#define BGMAC_FEAT_NO_RESET BIT(3) -+#define BGMAC_FEAT_MISC_PLL_REQ BIT(4) -+#define BGMAC_FEAT_SW_TYPE_PHY BIT(5) -+#define BGMAC_FEAT_SW_TYPE_EPHYRMII BIT(6) -+#define BGMAC_FEAT_SW_TYPE_RGMII BIT(7) -+#define BGMAC_FEAT_CMN_PHY_CTL BIT(8) -+#define BGMAC_FEAT_FLW_CTRL1 BIT(9) -+#define BGMAC_FEAT_FLW_CTRL2 BIT(10) -+#define BGMAC_FEAT_SET_RXQ_CLK BIT(11) -+#define BGMAC_FEAT_CLKCTLST BIT(12) -+#define BGMAC_FEAT_NO_CLR_MIB BIT(13) -+#define BGMAC_FEAT_FORCE_SPEED_2500 BIT(14) -+#define BGMAC_FEAT_CMDCFG_SR_REV4 BIT(15) -+ - struct bgmac_slot_info { - union { - struct sk_buff *skb; -@@ -430,6 +447,8 @@ struct bgmac { - - struct device *dev; - struct device *dma_dev; -+ u32 feature_flags; -+ - struct net_device *net_dev; - struct napi_struct napi; - struct mii_bus *mii_bus; diff --git a/target/linux/generic/pending-4.4/071-v4.8-0005-net-ethernet-bgmac-Add-platform-device-support.patch b/target/linux/generic/pending-4.4/071-v4.8-0005-net-ethernet-bgmac-Add-platform-device-support.patch deleted file mode 100644 index 5755184949..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0005-net-ethernet-bgmac-Add-platform-device-support.patch +++ /dev/null @@ -1,1260 +0,0 @@ -From f6a95a24957aec5bb488c3f978c4ed508177998f Mon Sep 17 00:00:00 2001 -From: Jon Mason <jon.mason@broadcom.com> -Date: Thu, 7 Jul 2016 19:08:57 -0400 -Subject: [PATCH 5/5] net: ethernet: bgmac: Add platform device support - -The bcma portion of the driver has been split off into a bcma specific -driver. This has been mirrored for the platform driver. The last -references to the bcma core struct have been changed into a generic -function call. These function calls are wrappers to either the original -bcma code or new platform functions that access the same areas via MMIO. -This necessitated adding function pointers for both platform and bcma to -hide which backend is being used from the generic bgmac code. - -Signed-off-by: Jon Mason <jon.mason@broadcom.com> -Acked-by: Arnd Bergmann <arnd@arndb.de> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Tested-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/Kconfig | 23 +- - drivers/net/ethernet/broadcom/Makefile | 4 +- - drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 2 + - drivers/net/ethernet/broadcom/bgmac-bcma.c | 315 +++++++++++++++++++++++ - drivers/net/ethernet/broadcom/bgmac-platform.c | 189 ++++++++++++++ - drivers/net/ethernet/broadcom/bgmac.c | 329 ++++-------------------- - drivers/net/ethernet/broadcom/bgmac.h | 73 +++++- - 7 files changed, 650 insertions(+), 285 deletions(-) - create mode 100644 drivers/net/ethernet/broadcom/bgmac-bcma.c - create mode 100644 drivers/net/ethernet/broadcom/bgmac-platform.c - ---- a/drivers/net/ethernet/broadcom/Kconfig -+++ b/drivers/net/ethernet/broadcom/Kconfig -@@ -150,10 +150,18 @@ config BNX2X_VXLAN - Virtual eXtensible Local Area Network (VXLAN) in the driver. - - config BGMAC -- tristate "BCMA bus GBit core support" -+ tristate -+ help -+ This enables the integrated ethernet controller support for many -+ Broadcom (mostly iProc) SoCs. An appropriate bus interface driver -+ needs to be enabled to select this. -+ -+config BGMAC_BCMA -+ tristate "Broadcom iProc GBit BCMA support" - depends on BCMA && BCMA_HOST_SOC - depends on HAS_DMA - depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST -+ select BGMAC - select PHYLIB - select FIXED_PHY - ---help--- -@@ -162,6 +170,19 @@ config BGMAC - In case of using this driver on BCM4706 it's also requires to enable - BCMA_DRIVER_GMAC_CMN to make it work. - -+config BGMAC_PLATFORM -+ tristate "Broadcom iProc GBit platform support" -+ depends on HAS_DMA -+ depends on ARCH_BCM_IPROC || COMPILE_TEST -+ depends on OF -+ select BGMAC -+ select PHYLIB -+ select FIXED_PHY -+ default ARCH_BCM_IPROC -+ ---help--- -+ Say Y here if you want to use the Broadcom iProc Gigabit Ethernet -+ controller through the generic platform interface -+ - config SYSTEMPORT - tristate "Broadcom SYSTEMPORT internal MAC support" - depends on OF ---- a/drivers/net/ethernet/broadcom/Makefile -+++ b/drivers/net/ethernet/broadcom/Makefile -@@ -10,6 +10,8 @@ obj-$(CONFIG_CNIC) += cnic.o - obj-$(CONFIG_BNX2X) += bnx2x/ - obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o - obj-$(CONFIG_TIGON3) += tg3.o --obj-$(CONFIG_BGMAC) += bgmac.o bgmac-bcma-mdio.o -+obj-$(CONFIG_BGMAC) += bgmac.o -+obj-$(CONFIG_BGMAC_BCMA) += bgmac-bcma.o bgmac-bcma-mdio.o -+obj-$(CONFIG_BGMAC_PLATFORM) += bgmac-platform.o - obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o - obj-$(CONFIG_BNXT) += bnxt/ ---- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c -@@ -255,6 +255,7 @@ err: - kfree(bcma_mdio); - return ERR_PTR(err); - } -+EXPORT_SYMBOL_GPL(bcma_mdio_mii_register); - - void bcma_mdio_mii_unregister(struct mii_bus *mii_bus) - { -@@ -270,6 +271,7 @@ void bcma_mdio_mii_unregister(struct mii - mdiobus_free(mii_bus); - kfree(bcma_mdio); - } -+EXPORT_SYMBOL_GPL(bcma_mdio_mii_unregister); - - MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki"); - MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c -@@ -0,0 +1,315 @@ -+/* -+ * Driver for (BCM4706)? GBit MAC core on BCMA bus. -+ * -+ * Copyright (C) 2012 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include <linux/bcma/bcma.h> -+#include <linux/brcmphy.h> -+#include <linux/etherdevice.h> -+#include "bgmac.h" -+ -+static inline bool bgmac_is_bcm4707_family(struct bcma_device *core) -+{ -+ switch (core->bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4707: -+ case BCMA_CHIP_ID_BCM47094: -+ case BCMA_CHIP_ID_BCM53018: -+ return true; -+ default: -+ return false; -+ } -+} -+ -+/************************************************** -+ * BCMA bus ops -+ **************************************************/ -+ -+static u32 bcma_bgmac_read(struct bgmac *bgmac, u16 offset) -+{ -+ return bcma_read32(bgmac->bcma.core, offset); -+} -+ -+static void bcma_bgmac_write(struct bgmac *bgmac, u16 offset, u32 value) -+{ -+ bcma_write32(bgmac->bcma.core, offset, value); -+} -+ -+static u32 bcma_bgmac_idm_read(struct bgmac *bgmac, u16 offset) -+{ -+ return bcma_aread32(bgmac->bcma.core, offset); -+} -+ -+static void bcma_bgmac_idm_write(struct bgmac *bgmac, u16 offset, u32 value) -+{ -+ return bcma_awrite32(bgmac->bcma.core, offset, value); -+} -+ -+static bool bcma_bgmac_clk_enabled(struct bgmac *bgmac) -+{ -+ return bcma_core_is_enabled(bgmac->bcma.core); -+} -+ -+static void bcma_bgmac_clk_enable(struct bgmac *bgmac, u32 flags) -+{ -+ bcma_core_enable(bgmac->bcma.core, flags); -+} -+ -+static void bcma_bgmac_cco_ctl_maskset(struct bgmac *bgmac, u32 offset, -+ u32 mask, u32 set) -+{ -+ struct bcma_drv_cc *cc = &bgmac->bcma.core->bus->drv_cc; -+ -+ bcma_chipco_chipctl_maskset(cc, offset, mask, set); -+} -+ -+static u32 bcma_bgmac_get_bus_clock(struct bgmac *bgmac) -+{ -+ struct bcma_drv_cc *cc = &bgmac->bcma.core->bus->drv_cc; -+ -+ return bcma_pmu_get_bus_clock(cc); -+} -+ -+static void bcma_bgmac_cmn_maskset32(struct bgmac *bgmac, u16 offset, u32 mask, -+ u32 set) -+{ -+ bcma_maskset32(bgmac->bcma.cmn, offset, mask, set); -+} -+ -+static const struct bcma_device_id bgmac_bcma_tbl[] = { -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, -+ BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, -+ BCMA_ANY_CLASS), -+ {}, -+}; -+MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ -+static int bgmac_probe(struct bcma_device *core) -+{ -+ struct ssb_sprom *sprom = &core->bus->sprom; -+ struct mii_bus *mii_bus; -+ struct bgmac *bgmac; -+ u8 *mac; -+ int err; -+ -+ bgmac = kzalloc(sizeof(*bgmac), GFP_KERNEL); -+ if (!bgmac) -+ return -ENOMEM; -+ -+ bgmac->bcma.core = core; -+ bgmac->dev = &core->dev; -+ bgmac->dma_dev = core->dma_dev; -+ bgmac->irq = core->irq; -+ -+ bcma_set_drvdata(core, bgmac); -+ -+ switch (core->core_unit) { -+ case 0: -+ mac = sprom->et0mac; -+ break; -+ case 1: -+ mac = sprom->et1mac; -+ break; -+ case 2: -+ mac = sprom->et2mac; -+ break; -+ default: -+ dev_err(bgmac->dev, "Unsupported core_unit %d\n", -+ core->core_unit); -+ err = -ENOTSUPP; -+ goto err; -+ } -+ -+ ether_addr_copy(bgmac->mac_addr, mac); -+ -+ /* On BCM4706 we need common core to access PHY */ -+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT && -+ !core->bus->drv_gmac_cmn.core) { -+ dev_err(bgmac->dev, "GMAC CMN core not found (required for BCM4706)\n"); -+ err = -ENODEV; -+ goto err; -+ } -+ bgmac->bcma.cmn = core->bus->drv_gmac_cmn.core; -+ -+ switch (core->core_unit) { -+ case 0: -+ bgmac->phyaddr = sprom->et0phyaddr; -+ break; -+ case 1: -+ bgmac->phyaddr = sprom->et1phyaddr; -+ break; -+ case 2: -+ bgmac->phyaddr = sprom->et2phyaddr; -+ break; -+ } -+ bgmac->phyaddr &= BGMAC_PHY_MASK; -+ if (bgmac->phyaddr == BGMAC_PHY_MASK) { -+ dev_err(bgmac->dev, "No PHY found\n"); -+ err = -ENODEV; -+ goto err; -+ } -+ dev_info(bgmac->dev, "Found PHY addr: %d%s\n", bgmac->phyaddr, -+ bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); -+ -+ if (!bgmac_is_bcm4707_family(core)) { -+ mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr); -+ if (!IS_ERR(mii_bus)) { -+ err = PTR_ERR(mii_bus); -+ goto err; -+ } -+ -+ bgmac->mii_bus = mii_bus; -+ } -+ -+ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { -+ dev_err(bgmac->dev, "PCI setup not implemented\n"); -+ err = -ENOTSUPP; -+ goto err1; -+ } -+ -+ bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & -+ BGMAC_BFL_ENETROBO); -+ if (bgmac->has_robosw) -+ dev_warn(bgmac->dev, "Support for Roboswitch not implemented\n"); -+ -+ if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) -+ dev_warn(bgmac->dev, "Support for ADMtek ethernet switch not implemented\n"); -+ -+ /* Feature Flags */ -+ switch (core->bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM5357: -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -+ if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47186) { -+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -+ } -+ if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM5358) -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_EPHYRMII; -+ break; -+ case BCMA_CHIP_ID_BCM53572: -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -+ if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47188) { -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -+ } -+ break; -+ case BCMA_CHIP_ID_BCM4749: -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -+ if (core->bus->chipinfo.pkg == 10) { -+ bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -+ } -+ break; -+ case BCMA_CHIP_ID_BCM4716: -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ /* fallthrough */ -+ case BCMA_CHIP_ID_BCM47162: -+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL2; -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ break; -+ /* bcm4707_family */ -+ case BCMA_CHIP_ID_BCM4707: -+ case BCMA_CHIP_ID_BCM47094: -+ case BCMA_CHIP_ID_BCM53018: -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_NO_RESET; -+ bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500; -+ break; -+ default: -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ } -+ -+ if (!bgmac_is_bcm4707_family(core) && core->id.rev > 2) -+ bgmac->feature_flags |= BGMAC_FEAT_MISC_PLL_REQ; -+ -+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ bgmac->feature_flags |= BGMAC_FEAT_CMN_PHY_CTL; -+ bgmac->feature_flags |= BGMAC_FEAT_NO_CLR_MIB; -+ } -+ -+ if (core->id.rev >= 4) { -+ bgmac->feature_flags |= BGMAC_FEAT_CMDCFG_SR_REV4; -+ bgmac->feature_flags |= BGMAC_FEAT_TX_MASK_SETUP; -+ bgmac->feature_flags |= BGMAC_FEAT_RX_MASK_SETUP; -+ } -+ -+ bgmac->read = bcma_bgmac_read; -+ bgmac->write = bcma_bgmac_write; -+ bgmac->idm_read = bcma_bgmac_idm_read; -+ bgmac->idm_write = bcma_bgmac_idm_write; -+ bgmac->clk_enabled = bcma_bgmac_clk_enabled; -+ bgmac->clk_enable = bcma_bgmac_clk_enable; -+ bgmac->cco_ctl_maskset = bcma_bgmac_cco_ctl_maskset; -+ bgmac->get_bus_clock = bcma_bgmac_get_bus_clock; -+ bgmac->cmn_maskset32 = bcma_bgmac_cmn_maskset32; -+ -+ err = bgmac_enet_probe(bgmac); -+ if (err) -+ goto err1; -+ -+ return 0; -+ -+err1: -+ bcma_mdio_mii_unregister(bgmac->mii_bus); -+err: -+ kfree(bgmac); -+ bcma_set_drvdata(core, NULL); -+ -+ return err; -+} -+ -+static void bgmac_remove(struct bcma_device *core) -+{ -+ struct bgmac *bgmac = bcma_get_drvdata(core); -+ -+ bcma_mdio_mii_unregister(bgmac->mii_bus); -+ bgmac_enet_remove(bgmac); -+ bcma_set_drvdata(core, NULL); -+ kfree(bgmac); -+} -+ -+static struct bcma_driver bgmac_bcma_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = bgmac_bcma_tbl, -+ .probe = bgmac_probe, -+ .remove = bgmac_remove, -+}; -+ -+static int __init bgmac_init(void) -+{ -+ int err; -+ -+ err = bcma_driver_register(&bgmac_bcma_driver); -+ if (err) -+ return err; -+ pr_info("Broadcom 47xx GBit MAC driver loaded\n"); -+ -+ return 0; -+} -+ -+static void __exit bgmac_exit(void) -+{ -+ bcma_driver_unregister(&bgmac_bcma_driver); -+} -+ -+module_init(bgmac_init) -+module_exit(bgmac_exit) -+ -+MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c -@@ -0,0 +1,189 @@ -+/* -+ * Copyright (C) 2016 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation version 2. -+ * -+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any -+ * kind, whether express or implied; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include <linux/bcma/bcma.h> -+#include <linux/etherdevice.h> -+#include <linux/of_address.h> -+#include <linux/of_net.h> -+#include "bgmac.h" -+ -+static u32 platform_bgmac_read(struct bgmac *bgmac, u16 offset) -+{ -+ return readl(bgmac->plat.base + offset); -+} -+ -+static void platform_bgmac_write(struct bgmac *bgmac, u16 offset, u32 value) -+{ -+ writel(value, bgmac->plat.base + offset); -+} -+ -+static u32 platform_bgmac_idm_read(struct bgmac *bgmac, u16 offset) -+{ -+ return readl(bgmac->plat.idm_base + offset); -+} -+ -+static void platform_bgmac_idm_write(struct bgmac *bgmac, u16 offset, u32 value) -+{ -+ return writel(value, bgmac->plat.idm_base + offset); -+} -+ -+static bool platform_bgmac_clk_enabled(struct bgmac *bgmac) -+{ -+ if ((bgmac_idm_read(bgmac, BCMA_IOCTL) & -+ (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) != BCMA_IOCTL_CLK) -+ return false; -+ if (bgmac_idm_read(bgmac, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) -+ return false; -+ return true; -+} -+ -+static void platform_bgmac_clk_enable(struct bgmac *bgmac, u32 flags) -+{ -+ bgmac_idm_write(bgmac, BCMA_IOCTL, -+ (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags)); -+ bgmac_idm_read(bgmac, BCMA_IOCTL); -+ -+ bgmac_idm_write(bgmac, BCMA_RESET_CTL, 0); -+ bgmac_idm_read(bgmac, BCMA_RESET_CTL); -+ udelay(1); -+ -+ bgmac_idm_write(bgmac, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); -+ bgmac_idm_read(bgmac, BCMA_IOCTL); -+ udelay(1); -+} -+ -+static void platform_bgmac_cco_ctl_maskset(struct bgmac *bgmac, u32 offset, -+ u32 mask, u32 set) -+{ -+ /* This shouldn't be encountered */ -+ WARN_ON(1); -+} -+ -+static u32 platform_bgmac_get_bus_clock(struct bgmac *bgmac) -+{ -+ /* This shouldn't be encountered */ -+ WARN_ON(1); -+ -+ return 0; -+} -+ -+static void platform_bgmac_cmn_maskset32(struct bgmac *bgmac, u16 offset, -+ u32 mask, u32 set) -+{ -+ /* This shouldn't be encountered */ -+ WARN_ON(1); -+} -+ -+static int bgmac_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct bgmac *bgmac; -+ struct resource *regs; -+ const u8 *mac_addr; -+ -+ bgmac = devm_kzalloc(&pdev->dev, sizeof(*bgmac), GFP_KERNEL); -+ if (!bgmac) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, bgmac); -+ -+ /* Set the features of the 4707 family */ -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_NO_RESET; -+ bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500; -+ bgmac->feature_flags |= BGMAC_FEAT_CMDCFG_SR_REV4; -+ bgmac->feature_flags |= BGMAC_FEAT_TX_MASK_SETUP; -+ bgmac->feature_flags |= BGMAC_FEAT_RX_MASK_SETUP; -+ -+ bgmac->dev = &pdev->dev; -+ bgmac->dma_dev = &pdev->dev; -+ -+ mac_addr = of_get_mac_address(np); -+ if (mac_addr) -+ ether_addr_copy(bgmac->mac_addr, mac_addr); -+ else -+ dev_warn(&pdev->dev, "MAC address not present in device tree\n"); -+ -+ bgmac->irq = platform_get_irq(pdev, 0); -+ if (bgmac->irq < 0) { -+ dev_err(&pdev->dev, "Unable to obtain IRQ\n"); -+ return bgmac->irq; -+ } -+ -+ regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "amac_base"); -+ if (!regs) { -+ dev_err(&pdev->dev, "Unable to obtain base resource\n"); -+ return -EINVAL; -+ } -+ -+ bgmac->plat.base = devm_ioremap_resource(&pdev->dev, regs); -+ if (IS_ERR(bgmac->plat.base)) { -+ dev_err(&pdev->dev, "Unable to map base resource\n"); -+ return PTR_ERR(bgmac->plat.base); -+ } -+ -+ regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "idm_base"); -+ if (!regs) { -+ dev_err(&pdev->dev, "Unable to obtain idm resource\n"); -+ return -EINVAL; -+ } -+ -+ bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs); -+ if (!bgmac->plat.idm_base) { -+ dev_err(&pdev->dev, "Unable to map idm resource\n"); -+ return PTR_ERR(bgmac->plat.idm_base); -+ } -+ -+ bgmac->read = platform_bgmac_read; -+ bgmac->write = platform_bgmac_write; -+ bgmac->idm_read = platform_bgmac_idm_read; -+ bgmac->idm_write = platform_bgmac_idm_write; -+ bgmac->clk_enabled = platform_bgmac_clk_enabled; -+ bgmac->clk_enable = platform_bgmac_clk_enable; -+ bgmac->cco_ctl_maskset = platform_bgmac_cco_ctl_maskset; -+ bgmac->get_bus_clock = platform_bgmac_get_bus_clock; -+ bgmac->cmn_maskset32 = platform_bgmac_cmn_maskset32; -+ -+ return bgmac_enet_probe(bgmac); -+} -+ -+static int bgmac_remove(struct platform_device *pdev) -+{ -+ struct bgmac *bgmac = platform_get_drvdata(pdev); -+ -+ bgmac_enet_remove(bgmac); -+ -+ return 0; -+} -+ -+static const struct of_device_id bgmac_of_enet_match[] = { -+ {.compatible = "brcm,amac",}, -+ {.compatible = "brcm,nsp-amac",}, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, bgmac_of_enet_match); -+ -+static struct platform_driver bgmac_enet_driver = { -+ .driver = { -+ .name = "bgmac-enet", -+ .of_match_table = bgmac_of_enet_match, -+ }, -+ .probe = bgmac_probe, -+ .remove = bgmac_remove, -+}; -+ -+module_platform_driver(bgmac_enet_driver); -+MODULE_LICENSE("GPL"); ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -6,51 +6,27 @@ - * Licensed under the GNU/GPL. See COPYING for details. - */ - --#include "bgmac.h" - --#include <linux/kernel.h> --#include <linux/module.h> --#include <linux/delay.h> -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include <linux/bcma/bcma.h> - #include <linux/etherdevice.h> --#include <linux/mii.h> --#include <linux/phy.h> --#include <linux/phy_fixed.h> --#include <linux/interrupt.h> --#include <linux/dma-mapping.h> - #include <linux/bcm47xx_nvram.h> -+#include "bgmac.h" - --static const struct bcma_device_id bgmac_bcma_tbl[] = { -- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), -- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), -- {}, --}; --MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); -- --static inline bool bgmac_is_bcm4707_family(struct bgmac *bgmac) --{ -- switch (bgmac->core->bus->chipinfo.id) { -- case BCMA_CHIP_ID_BCM4707: -- case BCMA_CHIP_ID_BCM47094: -- case BCMA_CHIP_ID_BCM53018: -- return true; -- default: -- return false; -- } --} -- --static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask, -+static bool bgmac_wait_value(struct bgmac *bgmac, u16 reg, u32 mask, - u32 value, int timeout) - { - u32 val; - int i; - - for (i = 0; i < timeout / 10; i++) { -- val = bcma_read32(core, reg); -+ val = bgmac_read(bgmac, reg); - if ((val & mask) == value) - return true; - udelay(10); - } -- dev_err(&core->dev, "Timeout waiting for reg 0x%X\n", reg); -+ dev_err(bgmac->dev, "Timeout waiting for reg 0x%X\n", reg); - return false; - } - -@@ -89,7 +65,7 @@ static void bgmac_dma_tx_reset(struct bg - - /* Remove SUSPEND bit */ - bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0); -- if (!bgmac_wait_value(bgmac->core, -+ if (!bgmac_wait_value(bgmac, - ring->mmio_base + BGMAC_DMA_TX_STATUS, - BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED, - 10000)) { -@@ -317,7 +293,7 @@ static void bgmac_dma_rx_reset(struct bg - return; - - bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0); -- if (!bgmac_wait_value(bgmac->core, -+ if (!bgmac_wait_value(bgmac, - ring->mmio_base + BGMAC_DMA_RX_STATUS, - BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED, - 10000)) -@@ -643,7 +619,7 @@ static int bgmac_dma_alloc(struct bgmac - BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base)); - BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base)); - -- if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) { -+ if (!(bgmac_idm_read(bgmac, BCMA_IOST) & BCMA_IOST_DMA64)) { - dev_err(bgmac->dev, "Core does not report 64-bit DMA\n"); - return -ENOTSUPP; - } -@@ -875,12 +851,10 @@ static void bgmac_mac_speed(struct bgmac - - static void bgmac_miiconfig(struct bgmac *bgmac) - { -- struct bcma_device *core = bgmac->core; -- - if (bgmac->feature_flags & BGMAC_FEAT_FORCE_SPEED_2500) { -- bcma_awrite32(core, BCMA_IOCTL, -- bcma_aread32(core, BCMA_IOCTL) | 0x40 | -- BGMAC_BCMA_IOCTL_SW_CLKEN); -+ bgmac_idm_write(bgmac, BCMA_IOCTL, -+ bgmac_idm_read(bgmac, BCMA_IOCTL) | 0x40 | -+ BGMAC_BCMA_IOCTL_SW_CLKEN); - bgmac->mac_speed = SPEED_2500; - bgmac->mac_duplex = DUPLEX_FULL; - bgmac_mac_speed(bgmac); -@@ -900,12 +874,11 @@ static void bgmac_miiconfig(struct bgmac - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */ - static void bgmac_chip_reset(struct bgmac *bgmac) - { -- struct bcma_device *core = bgmac->core; - u32 cmdcfg_sr; - u32 iost; - int i; - -- if (bcma_core_is_enabled(core)) { -+ if (bgmac_clk_enabled(bgmac)) { - if (!bgmac->stats_grabbed) { - /* bgmac_chip_stats_update(bgmac); */ - bgmac->stats_grabbed = true; -@@ -923,7 +896,7 @@ static void bgmac_chip_reset(struct bgma - /* TODO: Clear software multicast filter list */ - } - -- iost = bcma_aread32(core, BCMA_IOST); -+ iost = bgmac_idm_read(bgmac, BCMA_IOST); - if (bgmac->feature_flags & BGMAC_FEAT_IOST_ATTACHED) - iost &= ~BGMAC_BCMA_IOST_ATTACHED; - -@@ -935,21 +908,20 @@ static void bgmac_chip_reset(struct bgma - if (!bgmac->has_robosw) - flags |= BGMAC_BCMA_IOCTL_SW_RESET; - } -- bcma_core_enable(core, flags); -+ bgmac_clk_enable(bgmac, flags); - } - - /* Request Misc PLL for corerev > 2 */ - if (bgmac->feature_flags & BGMAC_FEAT_MISC_PLL_REQ) { - bgmac_set(bgmac, BCMA_CLKCTLST, - BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ); -- bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, -+ bgmac_wait_value(bgmac, BCMA_CLKCTLST, - BGMAC_BCMA_CLKCTLST_MISC_PLL_ST, - BGMAC_BCMA_CLKCTLST_MISC_PLL_ST, - 1000); - } - - if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_PHY) { -- struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; - u8 et_swtype = 0; - u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY | - BGMAC_CHIPCTL_1_IF_TYPE_MII; -@@ -968,16 +940,15 @@ static void bgmac_chip_reset(struct bgma - sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII | - BGMAC_CHIPCTL_1_SW_TYPE_RGMII; - } -- bcma_chipco_chipctl_maskset(cc, 1, -- ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | -- BGMAC_CHIPCTL_1_SW_TYPE_MASK), -- sw_type); -+ bgmac_cco_ctl_maskset(bgmac, 1, ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | -+ BGMAC_CHIPCTL_1_SW_TYPE_MASK), -+ sw_type); - } - - if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw) -- bcma_awrite32(core, BCMA_IOCTL, -- bcma_aread32(core, BCMA_IOCTL) & -- ~BGMAC_BCMA_IOCTL_SW_RESET); -+ bgmac_idm_write(bgmac, BCMA_IOCTL, -+ bgmac_idm_read(bgmac, BCMA_IOCTL) & -+ ~BGMAC_BCMA_IOCTL_SW_RESET); - - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset - * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine -@@ -1013,8 +984,8 @@ static void bgmac_chip_reset(struct bgma - - bgmac_clear_mib(bgmac); - if (bgmac->feature_flags & BGMAC_FEAT_CMN_PHY_CTL) -- bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0, -- BCMA_GMAC_CMN_PC_MTE); -+ bgmac_cmn_maskset32(bgmac, BCMA_GMAC_CMN_PHY_CTL, ~0, -+ BCMA_GMAC_CMN_PC_MTE); - else - bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE); - bgmac_miiconfig(bgmac); -@@ -1059,8 +1030,8 @@ static void bgmac_enable(struct bgmac *b - if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST || mode != 0) - bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); - if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST && mode == 2) -- bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0, -- BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); -+ bgmac_cco_ctl_maskset(bgmac, 1, ~0, -+ BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); - - if (bgmac->feature_flags & (BGMAC_FEAT_FLW_CTRL1 | - BGMAC_FEAT_FLW_CTRL2)) { -@@ -1082,8 +1053,7 @@ static void bgmac_enable(struct bgmac *b - - rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); - rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; -- bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / -- 1000000; -+ bp_clk = bgmac_get_bus_clock(bgmac) / 1000000; - mdp = (bp_clk * 128 / 1000) - 3; - rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT); - bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl); -@@ -1178,7 +1148,7 @@ static int bgmac_open(struct net_device - /* Specs say about reclaiming rings here, but we do that in DMA init */ - bgmac_chip_init(bgmac); - -- err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, -+ err = request_irq(bgmac->irq, bgmac_interrupt, IRQF_SHARED, - KBUILD_MODNAME, net_dev); - if (err < 0) { - dev_err(bgmac->dev, "IRQ request error: %d!\n", err); -@@ -1204,7 +1174,7 @@ static int bgmac_stop(struct net_device - - napi_disable(&bgmac->napi); - bgmac_chip_intrs_off(bgmac); -- free_irq(bgmac->core->irq, net_dev); -+ free_irq(bgmac->irq, net_dev); - - bgmac_chip_reset(bgmac); - bgmac_dma_cleanup(bgmac); -@@ -1399,7 +1369,7 @@ static void bgmac_get_drvinfo(struct net - struct ethtool_drvinfo *info) - { - strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); -- strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info)); -+ strlcpy(info->bus_info, "AXI", sizeof(info->bus_info)); - } - - static const struct ethtool_ops bgmac_ethtool_ops = { -@@ -1483,116 +1453,41 @@ static int bgmac_phy_connect(struct bgma - return 0; - } - --static int bgmac_probe(struct bcma_device *core) -+int bgmac_enet_probe(struct bgmac *info) - { - struct net_device *net_dev; - struct bgmac *bgmac; -- struct ssb_sprom *sprom = &core->bus->sprom; -- u8 *mac; - int err; - -- switch (core->core_unit) { -- case 0: -- mac = sprom->et0mac; -- break; -- case 1: -- mac = sprom->et1mac; -- break; -- case 2: -- mac = sprom->et2mac; -- break; -- default: -- dev_err(&core->dev, "Unsupported core_unit %d\n", -- core->core_unit); -- return -ENOTSUPP; -- } -- -- if (!is_valid_ether_addr(mac)) { -- dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac); -- eth_random_addr(mac); -- dev_warn(&core->dev, "Using random MAC: %pM\n", mac); -- } -- -- /* This (reset &) enable is not preset in specs or reference driver but -- * Broadcom does it in arch PCI code when enabling fake PCI device. -- */ -- bcma_core_enable(core, 0); -- - /* Allocation and references */ - net_dev = alloc_etherdev(sizeof(*bgmac)); - if (!net_dev) - return -ENOMEM; -+ - net_dev->netdev_ops = &bgmac_netdev_ops; -- net_dev->irq = core->irq; - net_dev->ethtool_ops = &bgmac_ethtool_ops; - bgmac = netdev_priv(net_dev); -- bgmac->dev = &core->dev; -- bgmac->dma_dev = core->dma_dev; -+ memcpy(bgmac, info, sizeof(*bgmac)); - bgmac->net_dev = net_dev; -- bgmac->core = core; -- bcma_set_drvdata(core, bgmac); -- SET_NETDEV_DEV(net_dev, &core->dev); -- -- /* Defaults */ -- memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN); -- -- /* On BCM4706 we need common core to access PHY */ -- if (core->id.id == BCMA_CORE_4706_MAC_GBIT && -- !core->bus->drv_gmac_cmn.core) { -- dev_err(bgmac->dev, "GMAC CMN core not found (required for BCM4706)\n"); -- err = -ENODEV; -- goto err_netdev_free; -- } -- bgmac->cmn = core->bus->drv_gmac_cmn.core; -+ net_dev->irq = bgmac->irq; -+ SET_NETDEV_DEV(net_dev, bgmac->dev); - -- switch (core->core_unit) { -- case 0: -- bgmac->phyaddr = sprom->et0phyaddr; -- break; -- case 1: -- bgmac->phyaddr = sprom->et1phyaddr; -- break; -- case 2: -- bgmac->phyaddr = sprom->et2phyaddr; -- break; -+ if (!is_valid_ether_addr(bgmac->mac_addr)) { -+ dev_err(bgmac->dev, "Invalid MAC addr: %pM\n", -+ bgmac->mac_addr); -+ eth_random_addr(bgmac->mac_addr); -+ dev_warn(bgmac->dev, "Using random MAC: %pM\n", -+ bgmac->mac_addr); - } -- bgmac->phyaddr &= BGMAC_PHY_MASK; -- if (bgmac->phyaddr == BGMAC_PHY_MASK) { -- dev_err(bgmac->dev, "No PHY found\n"); -- err = -ENODEV; -- goto err_netdev_free; -- } -- dev_info(bgmac->dev, "Found PHY addr: %d%s\n", bgmac->phyaddr, -- bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); -+ ether_addr_copy(net_dev->dev_addr, bgmac->mac_addr); - -- if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { -- dev_err(bgmac->dev, "PCI setup not implemented\n"); -- err = -ENOTSUPP; -- goto err_netdev_free; -- } -+ /* This (reset &) enable is not preset in specs or reference driver but -+ * Broadcom does it in arch PCI code when enabling fake PCI device. -+ */ -+ bgmac_clk_enable(bgmac, 0); - - bgmac_chip_reset(bgmac); - -- /* For Northstar, we have to take all GMAC core out of reset */ -- if (bgmac_is_bcm4707_family(bgmac)) { -- struct bcma_device *ns_core; -- int ns_gmac; -- -- /* Northstar has 4 GMAC cores */ -- for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) { -- /* As Northstar requirement, we have to reset all GMACs -- * before accessing one. bgmac_chip_reset() call -- * bcma_core_enable() for this core. Then the other -- * three GMACs didn't reset. We do it here. -- */ -- ns_core = bcma_find_core_unit(core->bus, -- BCMA_CORE_MAC_GBIT, -- ns_gmac); -- if (ns_core && !bcma_core_is_enabled(ns_core)) -- bcma_core_enable(ns_core, 0); -- } -- } -- - err = bgmac_dma_alloc(bgmac); - if (err) { - dev_err(bgmac->dev, "Unable to alloc memory for DMA\n"); -@@ -1603,103 +1498,15 @@ static int bgmac_probe(struct bcma_devic - if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0) - bgmac->int_mask &= ~BGMAC_IS_TX_MASK; - -- bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & -- BGMAC_BFL_ENETROBO); -- if (bgmac->has_robosw) -- dev_warn(bgmac->dev, "Support for Roboswitch not implemented\n"); -- -- if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) -- dev_warn(bgmac->dev, "Support for ADMtek ethernet switch not implemented\n"); -- -- /* Feature Flags */ -- switch (core->bus->chipinfo.id) { -- case BCMA_CHIP_ID_BCM5357: -- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -- bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -- if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47186) { -- bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -- } -- if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM5358) -- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_EPHYRMII; -- break; -- case BCMA_CHIP_ID_BCM53572: -- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -- bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -- if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47188) { -- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -- bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -- } -- break; -- case BCMA_CHIP_ID_BCM4749: -- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -- bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1; -- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY; -- if (core->bus->chipinfo.pkg == 10) { -- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII; -- bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -- } -- break; -- case BCMA_CHIP_ID_BCM4716: -- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -- /* fallthrough */ -- case BCMA_CHIP_ID_BCM47162: -- bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL2; -- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -- break; -- /* bcm4707_family */ -- case BCMA_CHIP_ID_BCM4707: -- case BCMA_CHIP_ID_BCM47094: -- case BCMA_CHIP_ID_BCM53018: -- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -- bgmac->feature_flags |= BGMAC_FEAT_NO_RESET; -- bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500; -- break; -- default: -- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -- } -- -- if (!bgmac_is_bcm4707_family(bgmac) && core->id.rev > 2) -- bgmac->feature_flags |= BGMAC_FEAT_MISC_PLL_REQ; -- -- if (core->id.id == BCMA_CORE_4706_MAC_GBIT) { -- bgmac->feature_flags |= BGMAC_FEAT_CMN_PHY_CTL; -- bgmac->feature_flags |= BGMAC_FEAT_NO_CLR_MIB; -- } -- -- if (core->id.rev >= 4) { -- bgmac->feature_flags |= BGMAC_FEAT_CMDCFG_SR_REV4; -- bgmac->feature_flags |= BGMAC_FEAT_TX_MASK_SETUP; -- bgmac->feature_flags |= BGMAC_FEAT_RX_MASK_SETUP; -- } -- - netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); - -- if (!bgmac_is_bcm4707_family(bgmac)) { -- struct mii_bus *mii_bus; -- -- mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr); -- if (!IS_ERR(mii_bus)) { -- err = PTR_ERR(mii_bus); -- goto err_dma_free; -- } -- -- bgmac->mii_bus = mii_bus; -- } -- - if (!bgmac->mii_bus) - err = bgmac_phy_connect_direct(bgmac); - else - err = bgmac_phy_connect(bgmac); - if (err) { - dev_err(bgmac->dev, "Cannot connect to phy\n"); -- goto err_mii_unregister; -+ goto err_dma_free; - } - - net_dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; -@@ -1718,56 +1525,24 @@ static int bgmac_probe(struct bcma_devic - - err_phy_disconnect: - phy_disconnect(net_dev->phydev); --err_mii_unregister: -- bcma_mdio_mii_unregister(bgmac->mii_bus); - err_dma_free: - bgmac_dma_free(bgmac); - err_netdev_free: -- bcma_set_drvdata(core, NULL); - free_netdev(net_dev); - - return err; - } -+EXPORT_SYMBOL_GPL(bgmac_enet_probe); - --static void bgmac_remove(struct bcma_device *core) -+void bgmac_enet_remove(struct bgmac *bgmac) - { -- struct bgmac *bgmac = bcma_get_drvdata(core); -- - unregister_netdev(bgmac->net_dev); - phy_disconnect(bgmac->net_dev->phydev); -- bcma_mdio_mii_unregister(bgmac->mii_bus); - netif_napi_del(&bgmac->napi); - bgmac_dma_free(bgmac); -- bcma_set_drvdata(core, NULL); - free_netdev(bgmac->net_dev); - } -- --static struct bcma_driver bgmac_bcma_driver = { -- .name = KBUILD_MODNAME, -- .id_table = bgmac_bcma_tbl, -- .probe = bgmac_probe, -- .remove = bgmac_remove, --}; -- --static int __init bgmac_init(void) --{ -- int err; -- -- err = bcma_driver_register(&bgmac_bcma_driver); -- if (err) -- return err; -- pr_info("Broadcom 47xx GBit MAC driver loaded\n"); -- -- return 0; --} -- --static void __exit bgmac_exit(void) --{ -- bcma_driver_unregister(&bgmac_bcma_driver); --} -- --module_init(bgmac_init) --module_exit(bgmac_exit) -+EXPORT_SYMBOL_GPL(bgmac_enet_remove); - - MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki"); - MODULE_LICENSE("GPL"); ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -1,8 +1,6 @@ - #ifndef _BGMAC_H - #define _BGMAC_H - --#include <linux/bcma/bcma.h> --#include <linux/brcmphy.h> - #include <linux/netdevice.h> - - #define BGMAC_DEV_CTL 0x000 -@@ -442,11 +440,21 @@ struct bgmac_rx_header { - }; - - struct bgmac { -- struct bcma_device *core; -- struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */ -+ union { -+ struct { -+ void *base; -+ void *idm_base; -+ } plat; -+ struct { -+ struct bcma_device *core; -+ /* Reference to CMN core for BCM4706 */ -+ struct bcma_device *cmn; -+ } bcma; -+ }; - - struct device *dev; - struct device *dma_dev; -+ unsigned char mac_addr[ETH_ALEN]; - u32 feature_flags; - - struct net_device *net_dev; -@@ -463,6 +471,7 @@ struct bgmac { - u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS]; - - /* Int */ -+ int irq; - u32 int_mask; - - /* Current MAC state */ -@@ -473,19 +482,71 @@ struct bgmac { - bool has_robosw; - - bool loopback; -+ -+ u32 (*read)(struct bgmac *bgmac, u16 offset); -+ void (*write)(struct bgmac *bgmac, u16 offset, u32 value); -+ u32 (*idm_read)(struct bgmac *bgmac, u16 offset); -+ void (*idm_write)(struct bgmac *bgmac, u16 offset, u32 value); -+ bool (*clk_enabled)(struct bgmac *bgmac); -+ void (*clk_enable)(struct bgmac *bgmac, u32 flags); -+ void (*cco_ctl_maskset)(struct bgmac *bgmac, u32 offset, u32 mask, -+ u32 set); -+ u32 (*get_bus_clock)(struct bgmac *bgmac); -+ void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask, -+ u32 set); - }; - -+int bgmac_enet_probe(struct bgmac *info); -+void bgmac_enet_remove(struct bgmac *bgmac); -+ - struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr); - void bcma_mdio_mii_unregister(struct mii_bus *mii_bus); - - static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset) - { -- return bcma_read32(bgmac->core, offset); -+ return bgmac->read(bgmac, offset); - } - - static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value) - { -- bcma_write32(bgmac->core, offset, value); -+ bgmac->write(bgmac, offset, value); -+} -+ -+static inline u32 bgmac_idm_read(struct bgmac *bgmac, u16 offset) -+{ -+ return bgmac->idm_read(bgmac, offset); -+} -+ -+static inline void bgmac_idm_write(struct bgmac *bgmac, u16 offset, u32 value) -+{ -+ bgmac->idm_write(bgmac, offset, value); -+} -+ -+static inline bool bgmac_clk_enabled(struct bgmac *bgmac) -+{ -+ return bgmac->clk_enabled(bgmac); -+} -+ -+static inline void bgmac_clk_enable(struct bgmac *bgmac, u32 flags) -+{ -+ bgmac->clk_enable(bgmac, flags); -+} -+ -+static inline void bgmac_cco_ctl_maskset(struct bgmac *bgmac, u32 offset, -+ u32 mask, u32 set) -+{ -+ bgmac->cco_ctl_maskset(bgmac, offset, mask, set); -+} -+ -+static inline u32 bgmac_get_bus_clock(struct bgmac *bgmac) -+{ -+ return bgmac->get_bus_clock(bgmac); -+} -+ -+static inline void bgmac_cmn_maskset32(struct bgmac *bgmac, u16 offset, -+ u32 mask, u32 set) -+{ -+ bgmac->cmn_maskset32(bgmac, offset, mask, set); - } - - static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask, diff --git a/target/linux/generic/pending-4.4/071-v4.8-0006-net-ethernet-bgmac-Fix-return-value-check-in-bgmac_p.patch b/target/linux/generic/pending-4.4/071-v4.8-0006-net-ethernet-bgmac-Fix-return-value-check-in-bgmac_p.patch deleted file mode 100644 index e0431c1235..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0006-net-ethernet-bgmac-Fix-return-value-check-in-bgmac_p.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 12c2e32f14da857b58af281b029d4549d24c3292 Mon Sep 17 00:00:00 2001 -From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> -Date: Tue, 12 Jul 2016 00:17:28 +0000 -Subject: [PATCH] net: ethernet: bgmac: Fix return value check in bgmac_probe() - -In case of error, the function devm_ioremap_resource() returns ERR_PTR() -and never returns NULL. The NULL test in the return value check should be -replaced with IS_ERR(). - -Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-platform.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bgmac-platform.c -+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c -@@ -141,7 +141,7 @@ static int bgmac_probe(struct platform_d - } - - bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs); -- if (!bgmac->plat.idm_base) { -+ if (IS_ERR(bgmac->plat.idm_base)) { - dev_err(&pdev->dev, "Unable to map idm resource\n"); - return PTR_ERR(bgmac->plat.idm_base); - } diff --git a/target/linux/generic/pending-4.4/071-v4.8-0007-net-ethernet-bgmac-Remove-redundant-dev_err-call-in-.patch b/target/linux/generic/pending-4.4/071-v4.8-0007-net-ethernet-bgmac-Remove-redundant-dev_err-call-in-.patch deleted file mode 100644 index 479094830e..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0007-net-ethernet-bgmac-Remove-redundant-dev_err-call-in-.patch +++ /dev/null @@ -1,42 +0,0 @@ -From ce3a380dddd0cb16cb3d8d947b69657d7646c121 Mon Sep 17 00:00:00 2001 -From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> -Date: Wed, 13 Jul 2016 12:46:57 +0000 -Subject: [PATCH] net: ethernet: bgmac: Remove redundant dev_err call in - bgmac_probe() - -There is a error message within devm_ioremap_resource -already, so remove the dev_err call to avoid redundant -error message. - -Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-platform.c | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac-platform.c -+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c -@@ -129,10 +129,8 @@ static int bgmac_probe(struct platform_d - } - - bgmac->plat.base = devm_ioremap_resource(&pdev->dev, regs); -- if (IS_ERR(bgmac->plat.base)) { -- dev_err(&pdev->dev, "Unable to map base resource\n"); -+ if (IS_ERR(bgmac->plat.base)) - return PTR_ERR(bgmac->plat.base); -- } - - regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "idm_base"); - if (!regs) { -@@ -141,10 +139,8 @@ static int bgmac_probe(struct platform_d - } - - bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs); -- if (IS_ERR(bgmac->plat.idm_base)) { -- dev_err(&pdev->dev, "Unable to map idm resource\n"); -+ if (IS_ERR(bgmac->plat.idm_base)) - return PTR_ERR(bgmac->plat.idm_base); -- } - - bgmac->read = platform_bgmac_read; - bgmac->write = platform_bgmac_write; diff --git a/target/linux/generic/pending-4.4/071-v4.8-0009-net-bgmac-fix-reversed-check-for-MII-registration-er.patch b/target/linux/generic/pending-4.4/071-v4.8-0009-net-bgmac-fix-reversed-check-for-MII-registration-er.patch deleted file mode 100644 index 945546d6df..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.8-0009-net-bgmac-fix-reversed-check-for-MII-registration-er.patch +++ /dev/null @@ -1,28 +0,0 @@ -From b9f63ae7ba2de2ba19137c5757c0607ce40f3ed5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 17 Aug 2016 15:37:14 +0200 -Subject: [PATCH] net: bgmac: fix reversed check for MII registration error -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It was failing on successful registration returning meaningless errors. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Fixes: 55954f3bfdac ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c -@@ -159,7 +159,7 @@ static int bgmac_probe(struct bcma_devic - - if (!bgmac_is_bcm4707_family(core)) { - mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr); -- if (!IS_ERR(mii_bus)) { -+ if (IS_ERR(mii_bus)) { - err = PTR_ERR(mii_bus); - goto err; - } diff --git a/target/linux/generic/pending-4.4/071-v4.9-0001-net-bgmac-support-Ethernet-core-on-BCM53573-SoCs.patch b/target/linux/generic/pending-4.4/071-v4.9-0001-net-bgmac-support-Ethernet-core-on-BCM53573-SoCs.patch deleted file mode 100644 index 82d3fe4d6d..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.9-0001-net-bgmac-support-Ethernet-core-on-BCM53573-SoCs.patch +++ /dev/null @@ -1,161 +0,0 @@ -From 1cb94db3d1bfe0075bde78fb2989f17e0a8a3936 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 17 Aug 2016 23:00:30 +0200 -Subject: [PATCH] net: bgmac: support Ethernet core on BCM53573 SoCs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and can -be found in two packages (versions): BCM53573 and BCM47189. It shares -some code with the Northstar family, but also requires some new quirks. - -First of all there can be up to 2 Ethernet cores on this SoC. If that is -the case, they are connected to two different switch ports allowing some -more complex/optimized setups. It seems the second unit doesn't come -fully configured and requires some IRQ quirk. - -Other than that only the first core is connected to the PHY. For the -second one we have to register fixed PHY (similarly to the Northstar), -otherwise generic PHY driver would get some invalid info. - -This has been successfully tested on Tenda AC9 (BCM47189B0). - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-bcma.c | 19 ++++++++++++++++++- - drivers/net/ethernet/broadcom/bgmac.c | 25 +++++++++++++++++++++++++ - drivers/net/ethernet/broadcom/bgmac.h | 19 +++++++++++++++++++ - include/linux/bcma/bcma.h | 3 +++ - include/linux/bcma/bcma_regs.h | 1 + - 5 files changed, 66 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c -@@ -92,6 +92,7 @@ MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ - static int bgmac_probe(struct bcma_device *core) - { -+ struct bcma_chipinfo *ci = &core->bus->chipinfo; - struct ssb_sprom *sprom = &core->bus->sprom; - struct mii_bus *mii_bus; - struct bgmac *bgmac; -@@ -157,7 +158,8 @@ static int bgmac_probe(struct bcma_devic - dev_info(bgmac->dev, "Found PHY addr: %d%s\n", bgmac->phyaddr, - bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); - -- if (!bgmac_is_bcm4707_family(core)) { -+ if (!bgmac_is_bcm4707_family(core) && -+ !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) { - mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr); - if (IS_ERR(mii_bus)) { - err = PTR_ERR(mii_bus); -@@ -230,6 +232,21 @@ static int bgmac_probe(struct bcma_devic - bgmac->feature_flags |= BGMAC_FEAT_NO_RESET; - bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500; - break; -+ case BCMA_CHIP_ID_BCM53573: -+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; -+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; -+ if (ci->pkg == BCMA_PKG_ID_BCM47189) -+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED; -+ if (core->core_unit == 0) { -+ bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE; -+ if (ci->pkg == BCMA_PKG_ID_BCM47189) -+ bgmac->feature_flags |= -+ BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII; -+ } else if (core->core_unit == 1) { -+ bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6; -+ bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII; -+ } -+ break; - default: - bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; - bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK; ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -943,6 +943,27 @@ static void bgmac_chip_reset(struct bgma - bgmac_cco_ctl_maskset(bgmac, 1, ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | - BGMAC_CHIPCTL_1_SW_TYPE_MASK), - sw_type); -+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE) { -+ u32 sw_type = BGMAC_CHIPCTL_4_IF_TYPE_MII | -+ BGMAC_CHIPCTL_4_SW_TYPE_EPHY; -+ u8 et_swtype = 0; -+ char buf[4]; -+ -+ if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) { -+ if (kstrtou8(buf, 0, &et_swtype)) -+ dev_err(bgmac->dev, "Failed to parse et_swtype (%s)\n", -+ buf); -+ sw_type = (et_swtype & 0x0f) << 12; -+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII) { -+ sw_type = BGMAC_CHIPCTL_4_IF_TYPE_RGMII | -+ BGMAC_CHIPCTL_4_SW_TYPE_RGMII; -+ } -+ bgmac_cco_ctl_maskset(bgmac, 4, ~(BGMAC_CHIPCTL_4_IF_TYPE_MASK | -+ BGMAC_CHIPCTL_4_SW_TYPE_MASK), -+ sw_type); -+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC7_IF_TYPE_RGMII) { -+ bgmac_cco_ctl_maskset(bgmac, 7, ~BGMAC_CHIPCTL_7_IF_TYPE_MASK, -+ BGMAC_CHIPCTL_7_IF_TYPE_RGMII); - } - - if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw) -@@ -1486,6 +1507,10 @@ int bgmac_enet_probe(struct bgmac *info) - */ - bgmac_clk_enable(bgmac, 0); - -+ /* This seems to be fixing IRQ by assigning OOB #6 to the core */ -+ if (bgmac->feature_flags & BGMAC_FEAT_IRQ_ID_OOB_6) -+ bgmac_idm_write(bgmac, BCMA_OOB_SEL_OUT_A30, 0x86); -+ - bgmac_chip_reset(bgmac); - - err = bgmac_dma_alloc(bgmac); ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -369,6 +369,21 @@ - #define BGMAC_CHIPCTL_1_SW_TYPE_RGMII 0x000000C0 - #define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000 - -+#define BGMAC_CHIPCTL_4_IF_TYPE_MASK 0x00003000 -+#define BGMAC_CHIPCTL_4_IF_TYPE_RMII 0x00000000 -+#define BGMAC_CHIPCTL_4_IF_TYPE_MII 0x00001000 -+#define BGMAC_CHIPCTL_4_IF_TYPE_RGMII 0x00002000 -+#define BGMAC_CHIPCTL_4_SW_TYPE_MASK 0x0000C000 -+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHY 0x00000000 -+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYMII 0x00004000 -+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYRMII 0x00008000 -+#define BGMAC_CHIPCTL_4_SW_TYPE_RGMII 0x0000C000 -+ -+#define BGMAC_CHIPCTL_7_IF_TYPE_MASK 0x000000C0 -+#define BGMAC_CHIPCTL_7_IF_TYPE_RMII 0x00000000 -+#define BGMAC_CHIPCTL_7_IF_TYPE_MII 0x00000040 -+#define BGMAC_CHIPCTL_7_IF_TYPE_RGMII 0x00000080 -+ - #define BGMAC_WEIGHT 64 - - #define ETHER_MAX_LEN 1518 -@@ -390,6 +405,10 @@ - #define BGMAC_FEAT_NO_CLR_MIB BIT(13) - #define BGMAC_FEAT_FORCE_SPEED_2500 BIT(14) - #define BGMAC_FEAT_CMDCFG_SR_REV4 BIT(15) -+#define BGMAC_FEAT_IRQ_ID_OOB_6 BIT(16) -+#define BGMAC_FEAT_CC4_IF_SW_TYPE BIT(17) -+#define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18) -+#define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19) - - struct bgmac_slot_info { - union { ---- a/include/linux/bcma/bcma_regs.h -+++ b/include/linux/bcma/bcma_regs.h -@@ -23,6 +23,7 @@ - #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ - - /* Agent registers (common for every core) */ -+#define BCMA_OOB_SEL_OUT_A30 0x0100 - #define BCMA_IOCTL 0x0408 /* IO control */ - #define BCMA_IOCTL_CLK 0x0001 - #define BCMA_IOCTL_FGC 0x0002 diff --git a/target/linux/generic/pending-4.4/071-v4.9-0002-net-bgmac-make-it-clear-when-setting-interface-type-.patch b/target/linux/generic/pending-4.4/071-v4.9-0002-net-bgmac-make-it-clear-when-setting-interface-type-.patch deleted file mode 100644 index 272ec5c3f3..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.9-0002-net-bgmac-make-it-clear-when-setting-interface-type-.patch +++ /dev/null @@ -1,31 +0,0 @@ -From e2d8f646c79f26e094bfaf9b21be614d1e148a67 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 17 Aug 2016 23:11:52 +0200 -Subject: [PATCH] net: bgmac: make it clear when setting interface type to RMII -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It doesn't really change anything as BGMAC_CHIPCTL_1_IF_TYPE_RMII is -equal to 0. It make code a bit clener, so far when reading it one could -think we forgot to set a proper mode. It also keeps this mode code in -sync with other ones. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -935,7 +935,8 @@ static void bgmac_chip_reset(struct bgma - et_swtype <<= 4; - sw_type = et_swtype; - } else if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_EPHYRMII) { -- sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; -+ sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RMII | -+ BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; - } else if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_RGMII) { - sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII | - BGMAC_CHIPCTL_1_SW_TYPE_RGMII; diff --git a/target/linux/generic/pending-4.4/071-v4.9-0003-net-bgmac-Fix-errant-feature-flag-check.patch b/target/linux/generic/pending-4.4/071-v4.9-0003-net-bgmac-Fix-errant-feature-flag-check.patch deleted file mode 100644 index 830d8ccde4..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.9-0003-net-bgmac-Fix-errant-feature-flag-check.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 4af1474e6198b10fee7bb20e81f7e033ad1b586c Mon Sep 17 00:00:00 2001 -From: Jon Mason <jon.mason@broadcom.com> -Date: Wed, 5 Oct 2016 15:36:49 -0400 -Subject: [PATCH] net: bgmac: Fix errant feature flag check -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -During the conversion to the feature flags, a check against -ci->id != BCMA_CHIP_ID_BCM47162 -became -bgmac->feature_flags & BGMAC_FEAT_CLKCTLS -instead of -!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLS) - -Reported-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Jon Mason <jon.mason@broadcom.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1049,7 +1049,7 @@ static void bgmac_enable(struct bgmac *b - - mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> - BGMAC_DS_MM_SHIFT; -- if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST || mode != 0) -+ if (!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLST) || mode != 0) - bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); - if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST && mode == 2) - bgmac_cco_ctl_maskset(bgmac, 1, ~0, diff --git a/target/linux/generic/pending-4.4/071-v4.9-0004-net-bgmac-fix-spelling-mistake-connecton-connection.patch b/target/linux/generic/pending-4.4/071-v4.9-0004-net-bgmac-fix-spelling-mistake-connecton-connection.patch deleted file mode 100644 index 5721abcf95..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.9-0004-net-bgmac-fix-spelling-mistake-connecton-connection.patch +++ /dev/null @@ -1,25 +0,0 @@ -From c121f72a66c5f92fbe2fc53baa274eef39875cec Mon Sep 17 00:00:00 2001 -From: Colin Ian King <colin.king@canonical.com> -Date: Mon, 24 Oct 2016 23:46:18 +0100 -Subject: [PATCH] net: bgmac: fix spelling mistake: "connecton" -> "connection" - -trivial fix to spelling mistake in dev_err message - -Signed-off-by: Colin Ian King <colin.king@canonical.com> -Acked-by: Jon Mason <jon.mason@broadcom.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1468,7 +1468,7 @@ static int bgmac_phy_connect(struct bgma - phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link, - PHY_INTERFACE_MODE_MII); - if (IS_ERR(phy_dev)) { -- dev_err(bgmac->dev, "PHY connecton failed\n"); -+ dev_err(bgmac->dev, "PHY connection failed\n"); - return PTR_ERR(phy_dev); - } - diff --git a/target/linux/generic/pending-4.4/071-v4.9-0005-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch b/target/linux/generic/pending-4.4/071-v4.9-0005-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch deleted file mode 100644 index e9bf06c870..0000000000 --- a/target/linux/generic/pending-4.4/071-v4.9-0005-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch +++ /dev/null @@ -1,35 +0,0 @@ -From cdb26d3387f0cdf7b2a2eea581385173547ef21f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 7 Nov 2016 13:53:27 +0100 -Subject: [PATCH] net: bgmac: fix reversed checks for clock control flag - -This fixes regression introduced by patch adding feature flags. It was -already reported and patch followed (it got accepted) but it appears it -was incorrect. Instead of fixing reversed condition it broke a good one. - -This patch was verified to actually fix SoC hanges caused by bgmac on -BCM47186B0. - -Fixes: db791eb2970b ("net: ethernet: bgmac: convert to feature flags") -Fixes: 4af1474e6198 ("net: bgmac: Fix errant feature flag check") -Cc: Jon Mason <jon.mason@broadcom.com> -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1049,9 +1049,9 @@ static void bgmac_enable(struct bgmac *b - - mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> - BGMAC_DS_MM_SHIFT; -- if (!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLST) || mode != 0) -+ if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST || mode != 0) - bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); -- if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST && mode == 2) -+ if (!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLST) && mode == 2) - bgmac_cco_ctl_maskset(bgmac, 1, ~0, - BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); - diff --git a/target/linux/generic/pending-4.4/072-net-add-devm-version-of-alloc_etherdev_mqs-function.patch b/target/linux/generic/pending-4.4/072-net-add-devm-version-of-alloc_etherdev_mqs-function.patch deleted file mode 100644 index be03cca9ee..0000000000 --- a/target/linux/generic/pending-4.4/072-net-add-devm-version-of-alloc_etherdev_mqs-function.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 40be0dda0725886b623d67868db3219a2e74683b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Sat, 28 Jan 2017 15:15:42 +0100 -Subject: [PATCH] net: add devm version of alloc_etherdev_mqs function - -This patch adds devm_alloc_etherdev_mqs function and devm_alloc_etherdev -macro. These can be used for simpler netdev allocation without having to -care about calling free_netdev. - -Thanks to this change drivers, their error paths and removal paths may -get simpler by a bit. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - include/linux/etherdevice.h | 5 +++++ - net/ethernet/eth.c | 28 ++++++++++++++++++++++++++++ - 2 files changed, 33 insertions(+) - ---- a/include/linux/etherdevice.h -+++ b/include/linux/etherdevice.h -@@ -51,6 +51,11 @@ struct net_device *alloc_etherdev_mqs(in - #define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1) - #define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count) - -+struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv, -+ unsigned int txqs, -+ unsigned int rxqs); -+#define devm_alloc_etherdev(dev, sizeof_priv) devm_alloc_etherdev_mqs(dev, sizeof_priv, 1, 1) -+ - struct sk_buff **eth_gro_receive(struct sk_buff **head, - struct sk_buff *skb); - int eth_gro_complete(struct sk_buff *skb, int nhoff); ---- a/net/ethernet/eth.c -+++ b/net/ethernet/eth.c -@@ -388,6 +388,34 @@ struct net_device *alloc_etherdev_mqs(in - } - EXPORT_SYMBOL(alloc_etherdev_mqs); - -+static void devm_free_netdev(struct device *dev, void *res) -+{ -+ free_netdev(*(struct net_device **)res); -+} -+ -+struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv, -+ unsigned int txqs, unsigned int rxqs) -+{ -+ struct net_device **dr; -+ struct net_device *netdev; -+ -+ dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL); -+ if (!dr) -+ return NULL; -+ -+ netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs); -+ if (!netdev) { -+ devres_free(dr); -+ return NULL; -+ } -+ -+ *dr = netdev; -+ devres_add(dev, dr); -+ -+ return netdev; -+} -+EXPORT_SYMBOL(devm_alloc_etherdev_mqs); -+ - ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len) - { - return scnprintf(buf, PAGE_SIZE, "%*phC\n", len, addr); diff --git a/target/linux/generic/pending-4.4/073-v4.10-0001-net-bgmac-allocate-struct-bgmac-just-once-don-t-copy.patch b/target/linux/generic/pending-4.4/073-v4.10-0001-net-bgmac-allocate-struct-bgmac-just-once-don-t-copy.patch deleted file mode 100644 index 544a074a78..0000000000 --- a/target/linux/generic/pending-4.4/073-v4.10-0001-net-bgmac-allocate-struct-bgmac-just-once-don-t-copy.patch +++ /dev/null @@ -1,139 +0,0 @@ -From 34a5102c3235c470a6c77fba16cb971964d9c136 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 31 Jan 2017 19:37:54 +0100 -Subject: [PATCH 1/3] net: bgmac: allocate struct bgmac just once & don't copy - it -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -So far were were allocating struct bgmac in 3 places: platform code, -bcma code and shared bgmac_enet_probe function. The reason for this was -bgmac_enet_probe: -1) Requiring early-filled struct bgmac -2) Calling alloc_etherdev on its own in order to use netdev_priv later - -This solution got few drawbacks: -1) Was duplicating allocating code -2) Required copying early-filled struct -3) Resulted in platform/bcma code having access only to unused struct - -Solve this situation by simply extracting some probe code into the new -bgmac_alloc function. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-bcma.c | 4 +--- - drivers/net/ethernet/broadcom/bgmac-platform.c | 2 +- - drivers/net/ethernet/broadcom/bgmac.c | 25 +++++++++++++++++-------- - drivers/net/ethernet/broadcom/bgmac.h | 3 ++- - 4 files changed, 21 insertions(+), 13 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c -@@ -99,12 +99,11 @@ static int bgmac_probe(struct bcma_devic - u8 *mac; - int err; - -- bgmac = kzalloc(sizeof(*bgmac), GFP_KERNEL); -+ bgmac = bgmac_alloc(&core->dev); - if (!bgmac) - return -ENOMEM; - - bgmac->bcma.core = core; -- bgmac->dev = &core->dev; - bgmac->dma_dev = core->dma_dev; - bgmac->irq = core->irq; - -@@ -285,7 +284,6 @@ static int bgmac_probe(struct bcma_devic - err1: - bcma_mdio_mii_unregister(bgmac->mii_bus); - err: -- kfree(bgmac); - bcma_set_drvdata(core, NULL); - - return err; ---- a/drivers/net/ethernet/broadcom/bgmac-platform.c -+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c -@@ -93,7 +93,7 @@ static int bgmac_probe(struct platform_d - struct resource *regs; - const u8 *mac_addr; - -- bgmac = devm_kzalloc(&pdev->dev, sizeof(*bgmac), GFP_KERNEL); -+ bgmac = bgmac_alloc(&pdev->dev); - if (!bgmac) - return -ENOMEM; - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1475,22 +1475,32 @@ static int bgmac_phy_connect(struct bgma - return 0; - } - --int bgmac_enet_probe(struct bgmac *info) -+struct bgmac *bgmac_alloc(struct device *dev) - { - struct net_device *net_dev; - struct bgmac *bgmac; -- int err; - - /* Allocation and references */ -- net_dev = alloc_etherdev(sizeof(*bgmac)); -+ net_dev = devm_alloc_etherdev(dev, sizeof(*bgmac)); - if (!net_dev) -- return -ENOMEM; -+ return NULL; - - net_dev->netdev_ops = &bgmac_netdev_ops; - net_dev->ethtool_ops = &bgmac_ethtool_ops; -+ - bgmac = netdev_priv(net_dev); -- memcpy(bgmac, info, sizeof(*bgmac)); -+ bgmac->dev = dev; - bgmac->net_dev = net_dev; -+ -+ return bgmac; -+} -+EXPORT_SYMBOL_GPL(bgmac_alloc); -+ -+int bgmac_enet_probe(struct bgmac *bgmac) -+{ -+ struct net_device *net_dev = bgmac->net_dev; -+ int err; -+ - net_dev->irq = bgmac->irq; - SET_NETDEV_DEV(net_dev, bgmac->dev); - -@@ -1517,7 +1527,7 @@ int bgmac_enet_probe(struct bgmac *info) - err = bgmac_dma_alloc(bgmac); - if (err) { - dev_err(bgmac->dev, "Unable to alloc memory for DMA\n"); -- goto err_netdev_free; -+ goto err_out; - } - - bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK; -@@ -1553,8 +1563,7 @@ err_phy_disconnect: - phy_disconnect(net_dev->phydev); - err_dma_free: - bgmac_dma_free(bgmac); --err_netdev_free: -- free_netdev(net_dev); -+err_out: - - return err; - } ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -515,7 +515,8 @@ struct bgmac { - u32 set); - }; - --int bgmac_enet_probe(struct bgmac *info); -+struct bgmac *bgmac_alloc(struct device *dev); -+int bgmac_enet_probe(struct bgmac *bgmac); - void bgmac_enet_remove(struct bgmac *bgmac); - - struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr); diff --git a/target/linux/generic/pending-4.4/073-v4.10-0002-net-bgmac-drop-struct-bcma_mdio-we-don-t-need-anymor.patch b/target/linux/generic/pending-4.4/073-v4.10-0002-net-bgmac-drop-struct-bcma_mdio-we-don-t-need-anymor.patch deleted file mode 100644 index 8848f619ea..0000000000 --- a/target/linux/generic/pending-4.4/073-v4.10-0002-net-bgmac-drop-struct-bcma_mdio-we-don-t-need-anymor.patch +++ /dev/null @@ -1,274 +0,0 @@ -From aa8863e5d49417094b9457a0d53e8505e95a1863 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 31 Jan 2017 19:37:55 +0100 -Subject: [PATCH 2/3] net: bgmac: drop struct bcma_mdio we don't need anymore -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Adding struct bcma_mdio was a workaround for bcma code not having access -to the struct bgmac used in the core code. Now we don't duplicate this -struct we can just use it internally in bcma code. - -This simplifies code & allows access to all bgmac driver details from -all places in bcma code. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 98 ++++++++++--------------- - drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 +- - drivers/net/ethernet/broadcom/bgmac.h | 2 +- - 3 files changed, 42 insertions(+), 60 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c -@@ -12,11 +12,6 @@ - #include <linux/brcmphy.h> - #include "bgmac.h" - --struct bcma_mdio { -- struct bcma_device *core; -- u8 phyaddr; --}; -- - static bool bcma_mdio_wait_value(struct bcma_device *core, u16 reg, u32 mask, - u32 value, int timeout) - { -@@ -37,7 +32,7 @@ static bool bcma_mdio_wait_value(struct - * PHY ops - **************************************************/ - --static u16 bcma_mdio_phy_read(struct bcma_mdio *bcma_mdio, u8 phyaddr, u8 reg) -+static u16 bcma_mdio_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) - { - struct bcma_device *core; - u16 phy_access_addr; -@@ -56,12 +51,12 @@ static u16 bcma_mdio_phy_read(struct bcm - BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); - BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); - -- if (bcma_mdio->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -- core = bcma_mdio->core->bus->drv_gmac_cmn.core; -+ if (bgmac->bcma.core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ core = bgmac->bcma.core->bus->drv_gmac_cmn.core; - phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; - phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; - } else { -- core = bcma_mdio->core; -+ core = bgmac->bcma.core; - phy_access_addr = BGMAC_PHY_ACCESS; - phy_ctl_addr = BGMAC_PHY_CNTL; - } -@@ -87,7 +82,7 @@ static u16 bcma_mdio_phy_read(struct bcm - } - - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ --static int bcma_mdio_phy_write(struct bcma_mdio *bcma_mdio, u8 phyaddr, u8 reg, -+static int bcma_mdio_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, - u16 value) - { - struct bcma_device *core; -@@ -95,12 +90,12 @@ static int bcma_mdio_phy_write(struct bc - u16 phy_ctl_addr; - u32 tmp; - -- if (bcma_mdio->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -- core = bcma_mdio->core->bus->drv_gmac_cmn.core; -+ if (bgmac->bcma.core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ core = bgmac->bcma.core->bus->drv_gmac_cmn.core; - phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; - phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; - } else { -- core = bcma_mdio->core; -+ core = bgmac->bcma.core; - phy_access_addr = BGMAC_PHY_ACCESS; - phy_ctl_addr = BGMAC_PHY_CNTL; - } -@@ -110,8 +105,8 @@ static int bcma_mdio_phy_write(struct bc - tmp |= phyaddr; - bcma_write32(core, phy_ctl_addr, tmp); - -- bcma_write32(bcma_mdio->core, BGMAC_INT_STATUS, BGMAC_IS_MDIO); -- if (bcma_read32(bcma_mdio->core, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) -+ bcma_write32(bgmac->bcma.core, BGMAC_INT_STATUS, BGMAC_IS_MDIO); -+ if (bcma_read32(bgmac->bcma.core, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) - dev_warn(&core->dev, "Error setting MDIO int\n"); - - tmp = BGMAC_PA_START; -@@ -132,39 +127,39 @@ static int bcma_mdio_phy_write(struct bc - } - - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ --static void bcma_mdio_phy_init(struct bcma_mdio *bcma_mdio) -+static void bcma_mdio_phy_init(struct bgmac *bgmac) - { -- struct bcma_chipinfo *ci = &bcma_mdio->core->bus->chipinfo; -+ struct bcma_chipinfo *ci = &bgmac->bcma.core->bus->chipinfo; - u8 i; - - if (ci->id == BCMA_CHIP_ID_BCM5356) { - for (i = 0; i < 5; i++) { -- bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x008b); -- bcma_mdio_phy_write(bcma_mdio, i, 0x15, 0x0100); -- bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f); -- bcma_mdio_phy_write(bcma_mdio, i, 0x12, 0x2aaa); -- bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b); -+ bcma_mdio_phy_write(bgmac, i, 0x1f, 0x008b); -+ bcma_mdio_phy_write(bgmac, i, 0x15, 0x0100); -+ bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000f); -+ bcma_mdio_phy_write(bgmac, i, 0x12, 0x2aaa); -+ bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b); - } - } - if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || - (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || - (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { -- struct bcma_drv_cc *cc = &bcma_mdio->core->bus->drv_cc; -+ struct bcma_drv_cc *cc = &bgmac->bcma.core->bus->drv_cc; - - bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); - bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); - for (i = 0; i < 5; i++) { -- bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f); -- bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x5284); -- bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b); -- bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x0010); -- bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f); -- bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x5296); -- bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x1073); -- bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x9073); -- bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x52b6); -- bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x9273); -- bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b); -+ bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000f); -+ bcma_mdio_phy_write(bgmac, i, 0x16, 0x5284); -+ bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b); -+ bcma_mdio_phy_write(bgmac, i, 0x17, 0x0010); -+ bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000f); -+ bcma_mdio_phy_write(bgmac, i, 0x16, 0x5296); -+ bcma_mdio_phy_write(bgmac, i, 0x17, 0x1073); -+ bcma_mdio_phy_write(bgmac, i, 0x17, 0x9073); -+ bcma_mdio_phy_write(bgmac, i, 0x16, 0x52b6); -+ bcma_mdio_phy_write(bgmac, i, 0x17, 0x9273); -+ bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b); - } - } - } -@@ -172,17 +167,17 @@ static void bcma_mdio_phy_init(struct bc - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ - static int bcma_mdio_phy_reset(struct mii_bus *bus) - { -- struct bcma_mdio *bcma_mdio = bus->priv; -- u8 phyaddr = bcma_mdio->phyaddr; -+ struct bgmac *bgmac = bus->priv; -+ u8 phyaddr = bgmac->phyaddr; - -- if (bcma_mdio->phyaddr == BGMAC_PHY_NOREGS) -+ if (phyaddr == BGMAC_PHY_NOREGS) - return 0; - -- bcma_mdio_phy_write(bcma_mdio, phyaddr, MII_BMCR, BMCR_RESET); -+ bcma_mdio_phy_write(bgmac, phyaddr, MII_BMCR, BMCR_RESET); - udelay(100); -- if (bcma_mdio_phy_read(bcma_mdio, phyaddr, MII_BMCR) & BMCR_RESET) -- dev_err(&bcma_mdio->core->dev, "PHY reset failed\n"); -- bcma_mdio_phy_init(bcma_mdio); -+ if (bcma_mdio_phy_read(bgmac, phyaddr, MII_BMCR) & BMCR_RESET) -+ dev_err(bgmac->dev, "PHY reset failed\n"); -+ bcma_mdio_phy_init(bgmac); - - return 0; - } -@@ -202,16 +197,12 @@ static int bcma_mdio_mii_write(struct mi - return bcma_mdio_phy_write(bus->priv, mii_id, regnum, value); - } - --struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr) -+struct mii_bus *bcma_mdio_mii_register(struct bgmac *bgmac) - { -- struct bcma_mdio *bcma_mdio; -+ struct bcma_device *core = bgmac->bcma.core; - struct mii_bus *mii_bus; - int i, err; - -- bcma_mdio = kzalloc(sizeof(*bcma_mdio), GFP_KERNEL); -- if (!bcma_mdio) -- return ERR_PTR(-ENOMEM); -- - mii_bus = mdiobus_alloc(); - if (!mii_bus) { - err = -ENOMEM; -@@ -221,12 +212,12 @@ struct mii_bus *bcma_mdio_mii_register(s - mii_bus->name = "bcma_mdio mii bus"; - sprintf(mii_bus->id, "%s-%d-%d", "bcma_mdio", core->bus->num, - core->core_unit); -- mii_bus->priv = bcma_mdio; -+ mii_bus->priv = bgmac; - mii_bus->read = bcma_mdio_mii_read; - mii_bus->write = bcma_mdio_mii_write; - mii_bus->reset = bcma_mdio_phy_reset; - mii_bus->parent = &core->dev; -- mii_bus->phy_mask = ~(1 << phyaddr); -+ mii_bus->phy_mask = ~(1 << bgmac->phyaddr); - - mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); - if (!mii_bus->irq) { -@@ -236,9 +227,6 @@ struct mii_bus *bcma_mdio_mii_register(s - for (i = 0; i < PHY_MAX_ADDR; i++) - mii_bus->irq[i] = PHY_POLL; - -- bcma_mdio->core = core; -- bcma_mdio->phyaddr = phyaddr; -- - err = mdiobus_register(mii_bus); - if (err) { - dev_err(&core->dev, "Registration of mii bus failed\n"); -@@ -252,24 +240,18 @@ err_free_irq: - err_free_bus: - mdiobus_free(mii_bus); - err: -- kfree(bcma_mdio); - return ERR_PTR(err); - } - EXPORT_SYMBOL_GPL(bcma_mdio_mii_register); - - void bcma_mdio_mii_unregister(struct mii_bus *mii_bus) - { -- struct bcma_mdio *bcma_mdio; -- - if (!mii_bus) - return; - -- bcma_mdio = mii_bus->priv; -- - mdiobus_unregister(mii_bus); - kfree(mii_bus->irq); - mdiobus_free(mii_bus); -- kfree(bcma_mdio); - } - EXPORT_SYMBOL_GPL(bcma_mdio_mii_unregister); - ---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c -@@ -159,7 +159,7 @@ static int bgmac_probe(struct bcma_devic - - if (!bgmac_is_bcm4707_family(core) && - !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) { -- mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr); -+ mii_bus = bcma_mdio_mii_register(bgmac); - if (IS_ERR(mii_bus)) { - err = PTR_ERR(mii_bus); - goto err; ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -519,7 +519,7 @@ struct bgmac *bgmac_alloc(struct device - int bgmac_enet_probe(struct bgmac *bgmac); - void bgmac_enet_remove(struct bgmac *bgmac); - --struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr); -+struct mii_bus *bcma_mdio_mii_register(struct bgmac *bgmac); - void bcma_mdio_mii_unregister(struct mii_bus *mii_bus); - - static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset) diff --git a/target/linux/generic/pending-4.4/073-v4.10-0003-net-bgmac-use-PHY-subsystem-for-initializing-PHY.patch b/target/linux/generic/pending-4.4/073-v4.10-0003-net-bgmac-use-PHY-subsystem-for-initializing-PHY.patch deleted file mode 100644 index d1be3e3f4c..0000000000 --- a/target/linux/generic/pending-4.4/073-v4.10-0003-net-bgmac-use-PHY-subsystem-for-initializing-PHY.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 8e6f31baba7e2c13ab7e954fe6179420a7545a8b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 31 Jan 2017 19:37:56 +0100 -Subject: [PATCH 3/3] net: bgmac: use PHY subsystem for initializing PHY -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This adds support for using bgmac with PHYs supported by standalone PHY -drivers. Having any PHY initialization in bgmac is hacky and shouldn't -be extended but rather removed if anyone has hardware to test it. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c -@@ -132,6 +132,10 @@ static void bcma_mdio_phy_init(struct bg - struct bcma_chipinfo *ci = &bgmac->bcma.core->bus->chipinfo; - u8 i; - -+ /* For some legacy hardware we do chipset-based PHY initialization here -+ * without even detecting PHY ID. It's hacky and should be cleaned as -+ * soon as someone can test it. -+ */ - if (ci->id == BCMA_CHIP_ID_BCM5356) { - for (i = 0; i < 5; i++) { - bcma_mdio_phy_write(bgmac, i, 0x1f, 0x008b); -@@ -140,6 +144,7 @@ static void bcma_mdio_phy_init(struct bg - bcma_mdio_phy_write(bgmac, i, 0x12, 0x2aaa); - bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b); - } -+ return; - } - if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || - (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || -@@ -161,7 +166,12 @@ static void bcma_mdio_phy_init(struct bg - bcma_mdio_phy_write(bgmac, i, 0x17, 0x9273); - bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b); - } -+ return; - } -+ -+ /* For all other hw do initialization using PHY subsystem. */ -+ if (bgmac->net_dev && bgmac->net_dev->phydev) -+ phy_init_hw(bgmac->net_dev->phydev); - } - - /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ diff --git a/target/linux/generic/pending-4.4/073-v4.15-0001-net-bgmac-enable-master-mode-for-BCM54210E-and-B5021.patch b/target/linux/generic/pending-4.4/073-v4.15-0001-net-bgmac-enable-master-mode-for-BCM54210E-and-B5021.patch deleted file mode 100644 index 27cd660b5c..0000000000 --- a/target/linux/generic/pending-4.4/073-v4.15-0001-net-bgmac-enable-master-mode-for-BCM54210E-and-B5021.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 12acd136913ccdf394eeb2bc8686ff5505368119 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 12 Oct 2017 10:21:26 +0200 -Subject: [PATCH] net: bgmac: enable master mode for BCM54210E and B50212E PHYs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -There are 4 very similar PHYs: -0x600d84a1: BCM54210E (rev B0) -0x600d84a2: BCM54210E (rev B1) -0x600d84a5: B50212E (rev B0) -0x600d84a6: B50212E (rev B1) -that need setting master mode manually. It's because they run in slave -mode by default with Automatic Slave/Master configuration disabled which -can lead to unreliable connection with massive ping loss. - -So far it was reported for a board with BCM47189 SoC and B50212E B1 PHY -connected to the bgmac supported ethernet device. Telling PHY driver to -setup PHY properly solves this issue. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/ethernet/broadcom/bgmac-bcma.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c -@@ -159,13 +159,19 @@ static int bgmac_probe(struct bcma_devic - - if (!bgmac_is_bcm4707_family(core) && - !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) { -+ struct phy_device *phydev; -+ - mii_bus = bcma_mdio_mii_register(bgmac); - if (IS_ERR(mii_bus)) { - err = PTR_ERR(mii_bus); - goto err; - } -- - bgmac->mii_bus = mii_bus; -+ -+ phydev = bgmac->mii_bus->phy_map[bgmac->phyaddr]; -+ if (ci->id == BCMA_CHIP_ID_BCM53573 && phydev && -+ (phydev->drv->phy_id & phydev->drv->phy_id_mask) == PHY_ID_BCM54210E) -+ phydev->dev_flags |= PHY_BRCM_EN_MASTER_MODE; - } - - if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { diff --git a/target/linux/generic/pending-4.4/074-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/generic/pending-4.4/074-NET-PHY-adds-driver-for-lantiq-PHY11G.patch deleted file mode 100644 index e24099ef45..0000000000 --- a/target/linux/generic/pending-4.4/074-NET-PHY-adds-driver-for-lantiq-PHY11G.patch +++ /dev/null @@ -1,537 +0,0 @@ -From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Thu, 7 Aug 2014 18:15:36 +0200 -Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/net/phy/Kconfig | 5 + - drivers/net/phy/Makefile | 1 + - drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 237 insertions(+) - create mode 100644 drivers/net/phy/lantiq.c - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -156,6 +156,11 @@ config MICROCHIP_PHY - help - Supports the LAN88XX PHYs. - -+config LANTIQ_PHY -+ tristate "Driver for Lantiq PHYs" -+ ---help--- -+ Supports the 11G and 22F PHYs. -+ - config FIXED_PHY - tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o - obj-$(CONFIG_DP83867_PHY) += dp83867.o - obj-$(CONFIG_STE10XP) += ste10Xp.o - obj-$(CONFIG_MICREL_PHY) += micrel.o -+obj-$(CONFIG_LANTIQ_PHY) += lantiq.o - obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o - obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o - obj-$(CONFIG_AT803X_PHY) += at803x.o ---- /dev/null -+++ b/drivers/net/phy/lantiq.c -@@ -0,0 +1,278 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> -+ */ -+ -+#include <linux/module.h> -+#include <linux/phy.h> -+#include <linux/of.h> -+ -+#define MII_MMDCTRL 0x0d -+#define MII_MMDDATA 0x0e -+ -+#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */ -+#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */ -+ -+#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */ -+#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */ -+#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */ -+#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */ -+#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */ -+#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */ -+#define INT_VR9_11G_LSTC BIT(0) /* Link state change */ -+#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC) -+ -+#define ADVERTISED_MPD BIT(10) /* Multi-port device */ -+ -+#define MMD_DEVAD 0x1f -+#define MMD_ACTYPE_SHIFT 14 -+#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT) -+#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT) -+#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT) -+#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT) -+ -+static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev, -+ u16 regnum) -+{ -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD); -+ phy_write(phydev, MII_MMDDATA, regnum); -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD); -+ -+ return phy_read(phydev, MII_MMDDATA); -+} -+ -+static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev, -+ u16 regnum, u16 val) -+{ -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD); -+ phy_write(phydev, MII_MMDDATA, regnum); -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD); -+ phy_write(phydev, MII_MMDDATA, val); -+ -+ return 0; -+} -+ -+#if IS_ENABLED(CONFIG_OF_MDIO) -+static int vr9_gphy_of_reg_init(struct phy_device *phydev) -+{ -+ u32 tmp; -+ -+ /* store the led values if one was passed by the devicetree */ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledch", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e0, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledcl", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e1, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0h", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e2, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0l", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e3, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1h", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e4, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1l", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e5, tmp); -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2h", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e6, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2l", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e7, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3h", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e8, tmp); -+ -+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3l", &tmp)) -+ vr9_gphy_mmd_write(phydev, 0x1e9, tmp); -+ -+ return 0; -+} -+#else -+static int vr9_gphy_of_reg_init(struct phy_device *phydev) -+{ -+ return 0; -+} -+#endif /* CONFIG_OF_MDIO */ -+ -+static int vr9_gphy_config_init(struct phy_device *phydev) -+{ -+ int err; -+ -+ dev_dbg(&phydev->dev, "%s\n", __func__); -+ -+ /* Mask all interrupts */ -+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0); -+ if (err) -+ return err; -+ -+ /* Clear all pending interrupts */ -+ phy_read(phydev, MII_VR9_11G_ISTAT); -+ -+ vr9_gphy_mmd_write(phydev, 0x1e0, 0xc0); -+ vr9_gphy_mmd_write(phydev, 0x1e1, 0x00); -+ vr9_gphy_mmd_write(phydev, 0x1e2, 0x70); -+ vr9_gphy_mmd_write(phydev, 0x1e3, 0x03); -+ vr9_gphy_mmd_write(phydev, 0x1e4, 0x70); -+ vr9_gphy_mmd_write(phydev, 0x1e5, 0x03); -+ vr9_gphy_mmd_write(phydev, 0x1e6, 0x70); -+ vr9_gphy_mmd_write(phydev, 0x1e7, 0x03); -+ vr9_gphy_mmd_write(phydev, 0x1e8, 0x70); -+ vr9_gphy_mmd_write(phydev, 0x1e9, 0x03); -+ -+ vr9_gphy_of_reg_init(phydev); -+ -+ return 0; -+} -+ -+static int vr9_gphy_config_aneg(struct phy_device *phydev) -+{ -+ int reg, err; -+ -+ /* Advertise as multi-port device */ -+ reg = phy_read(phydev, MII_CTRL1000); -+ reg |= ADVERTISED_MPD; -+ err = phy_write(phydev, MII_CTRL1000, reg); -+ if (err) -+ return err; -+ -+ return genphy_config_aneg(phydev); -+} -+ -+static int vr9_gphy_ack_interrupt(struct phy_device *phydev) -+{ -+ int reg; -+ -+ /* -+ * Possible IRQ numbers: -+ * - IM3_IRL18 for GPHY0 -+ * - IM3_IRL17 for GPHY1 -+ * -+ * Due to a silicon bug IRQ lines are not really independent from -+ * each other. Sometimes the two lines are driven at the same time -+ * if only one GPHY core raises the interrupt. -+ */ -+ -+ reg = phy_read(phydev, MII_VR9_11G_ISTAT); -+ -+ return (reg < 0) ? reg : 0; -+} -+ -+static int vr9_gphy_did_interrupt(struct phy_device *phydev) -+{ -+ int reg; -+ -+ reg = phy_read(phydev, MII_VR9_11G_ISTAT); -+ -+ return reg > 0; -+} -+ -+static int vr9_gphy_config_intr(struct phy_device *phydev) -+{ -+ int err; -+ -+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) -+ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK); -+ else -+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0); -+ -+ return err; -+} -+ -+static struct phy_driver lantiq_phy[] = { -+ { -+ .phy_id = 0xd565a400, -+ .phy_id_mask = 0xfffffff8, -+ .name = "Lantiq XWAY PEF7071", -+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, { -+ .phy_id = 0x030260D0, -+ .phy_id_mask = 0xfffffff0, -+ .name = "Lantiq XWAY VR9 GPHY 11G v1.3", -+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, { -+ .phy_id = 0xd565a408, -+ .phy_id_mask = 0xfffffff8, -+ .name = "Lantiq XWAY VR9 GPHY 11G v1.4", -+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, { -+ .phy_id = 0xd565a418, -+ .phy_id_mask = 0xfffffff8, -+ .name = "Lantiq XWAY XRX PHY22F v1.4", -+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, -+}; -+ -+static int __init ltq_phy_init(void) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) { -+ int err = phy_driver_register(&lantiq_phy[i]); -+ if (err) -+ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name); -+ } -+ -+ return 0; -+} -+ -+static void __exit ltq_phy_exit(void) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) -+ phy_driver_unregister(&lantiq_phy[i]); -+} -+ -+module_init(ltq_phy_init); -+module_exit(ltq_phy_exit); -+ -+MODULE_DESCRIPTION("Lantiq PHY drivers"); -+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt -@@ -0,0 +1,216 @@ -+Lanitq PHY binding -+============================================ -+ -+This devicetree binding controls the lantiq ethernet phys led functionality. -+ -+Example: -+ mdio@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "lantiq,xrx200-mdio"; -+ phy5: ethernet-phy@5 { -+ reg = <0x1>; -+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; -+ }; -+ phy11: ethernet-phy@11 { -+ reg = <0x11>; -+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; -+ lantiq,led2h = <0x00>; -+ lantiq,led2l = <0x03>; -+ }; -+ phy12: ethernet-phy@12 { -+ reg = <0x12>; -+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; -+ lantiq,led1h = <0x00>; -+ lantiq,led1l = <0x03>; -+ }; -+ phy13: ethernet-phy@13 { -+ reg = <0x13>; -+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; -+ lantiq,led2h = <0x00>; -+ lantiq,led2l = <0x03>; -+ }; -+ phy14: ethernet-phy@14 { -+ reg = <0x14>; -+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; -+ lantiq,led1h = <0x00>; -+ lantiq,led1l = <0x03>; -+ }; -+ }; -+ -+Register Description -+============================================ -+ -+LEDCH: -+ -+Name Hardware Reset Value -+LEDCH 0x00C5 -+ -+| 15 | | | | | | | 8 | -+========================================= -+| RES | -+========================================= -+ -+| 7 | | | | | | | 0 | -+========================================= -+| FBF | SBF |RES | NACS | -+========================================= -+ -+Field Bits Type Description -+FBF 7:6 RW Fast Blink Frequency -+ --- -+ 0x0 (00b) F02HZ 2 Hz blinking frequency -+ 0x1 (01b) F04HZ 4 Hz blinking frequency -+ 0x2 (10b) F08HZ 8 Hz blinking frequency -+ 0x3 (11b) F16HZ 16 Hz blinking frequency -+ -+SBF 5:4 RW Slow Blink Frequency -+ --- -+ 0x0 (00b) F02HZ 2 Hz blinking frequency -+ 0x1 (01b) F04HZ 4 Hz blinking frequency -+ 0x2 (10b) F08HZ 8 Hz blinking frequency -+ 0x3 (11b) F16HZ 16 Hz blinking frequency -+ -+NACS 2:0 RW Inverse of Scan Function -+ --- -+ 0x0 (000b) NONE No Function -+ 0x1 (001b) LINK Complex function enabled when link is up -+ 0x2 (010b) PDOWN Complex function enabled when device is powered-down -+ 0x3 (011b) EEE Complex function enabled when device is in EEE mode -+ 0x4 (100b) ANEG Complex function enabled when auto-negotiation is running -+ 0x5 (101b) ABIST Complex function enabled when analog self-test is running -+ 0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running -+ 0x7 (111b) TEST Complex function enabled when test mode is running -+ -+LEDCL: -+ -+Name Hardware Reset Value -+LEDCL 0x0067 -+ -+| 15 | | | | | | | 8 | -+========================================= -+| RES | -+========================================= -+ -+| 7 | | | | | | | 0 | -+========================================= -+|RES | SCAN |RES | CBLINK | -+========================================= -+ -+Field Bits Type Description -+SCAN 6:4 RW Complex Scan Configuration -+ --- -+ 000 B NONE No Function -+ 001 B LINK Complex function enabled when link is up -+ 010 B PDOWN Complex function enabled when device is powered-down -+ 011 B EEE Complex function enabled when device is in EEE mode -+ 100 B ANEG Complex function enabled when auto-negotiation is running -+ 101 B ABIST Complex function enabled when analog self-test is running -+ 110 B CDIAG Complex function enabled when cable diagnostics are running -+ 111 B TEST Complex function enabled when test mode is running -+ -+CBLINK 2:0 RW Complex Blinking Configuration -+ --- -+ 000 B NONE No Function -+ 001 B LINK Complex function enabled when link is up -+ 010 B PDOWN Complex function enabled when device is powered-down -+ 011 B EEE Complex function enabled when device is in EEE mode -+ 100 B ANEG Complex function enabled when auto-negotiation is running -+ 101 B ABIST Complex function enabled when analog self-test is running -+ 110 B CDIAG Complex function enabled when cable diagnostics are running -+ 111 B TEST Complex function enabled when test mode is running -+ -+LEDxH: -+ -+Name Hardware Reset Value -+LED0H 0x0070 -+LED1H 0x0020 -+LED2H 0x0040 -+LED3H 0x0040 -+ -+| 15 | | | | | | | 8 | -+========================================= -+| RES | -+========================================= -+ -+| 7 | | | | | | | 0 | -+========================================= -+| CON | BLINKF | -+========================================= -+ -+Field Bits Type Description -+CON 7:4 RW Constant On Configuration -+ --- -+ 0x0 (0000b) NONE LED does not light up constantly -+ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s -+ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s -+ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s -+ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s -+ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s -+ 0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s -+ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s -+ 0x8 (1000b) PDOWN LED is on when device is powered-down -+ 0x9 (1001b) EEE LED is on when device is in EEE mode -+ 0xA (1010b) ANEG LED is on when auto-negotiation is running -+ 0xB (1011b) ABIST LED is on when analog self-test is running -+ 0xC (1100b) CDIAG LED is on when cable diagnostics are running -+ -+BLINKF 3:0 RW Fast Blinking Configuration -+ --- -+ 0x0 (0000b) NONE No Blinking -+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s -+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s -+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s -+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s -+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s -+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s -+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s -+ 0x8 (1000b) PDOWN Blink when device is powered-down -+ 0x9 (1001b) EEE Blink when device is in EEE mode -+ 0xA (1010b) ANEG Blink when auto-negotiation is running -+ 0xB (1011b) ABIST Blink when analog self-test is running -+ 0xC (1100b) CDIAG Blink when cable diagnostics are running -+ -+LEDxL: -+ -+Name Hardware Reset Value -+LED0L 0x0003 -+LED1L 0x0000 -+LED2L 0x0000 -+LED3L 0x0020 -+ -+| 15 | | | | | | | 8 | -+========================================= -+| RES | -+========================================= -+ -+| 7 | | | | | | | 0 | -+========================================= -+| BLINKS | PULSE | -+========================================= -+ -+Field Bits Type Description -+BLINKS 7:4 RW Slow Blinkin Configuration -+ --- -+ 0x0 (0000b) NONE No Blinking -+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s -+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s -+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s -+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s -+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s -+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s -+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s -+ 0x8 (1000b) PDOWN Blink when device is powered-down -+ 0x9 (1001b) EEE Blink when device is in EEE mode -+ 0xA (1010b) ANEG Blink when auto-negotiation is running -+ 0xB (1011b) ABIST Blink when analog self-test is running -+ 0xC (1100b) CDIAG Blink when cable diagnostics are runningning -+ -+PULSE 3:0 RW Pulsing Configuration -+ The pulse field is a mask field by which certain events can be combined -+ --- -+ 0x0 (0000b) NONE No pulsing -+ 0x1 (0001b) TXACT Transmit activity -+ 0x2 (0010b) RXACT Receive activity -+ 0x4 (0100b) COL Collision -+ 0x8 (1000b) RES Reserved diff --git a/target/linux/generic/pending-4.4/078-0001-net-phy-update-Broadcom-drivers-to-v4.5.patch b/target/linux/generic/pending-4.4/078-0001-net-phy-update-Broadcom-drivers-to-v4.5.patch deleted file mode 100644 index 222d126f69..0000000000 --- a/target/linux/generic/pending-4.4/078-0001-net-phy-update-Broadcom-drivers-to-v4.5.patch +++ /dev/null @@ -1,125 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH 1/4] net: phy: update Broadcom drivers to v4.5 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> ---- - ---- a/drivers/net/phy/bcm7xxx.c -+++ b/drivers/net/phy/bcm7xxx.c -@@ -250,10 +250,6 @@ static int bcm7xxx_config_init(struct ph - phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO); - phy_read(phydev, MII_BCM7XXX_AUX_MODE); - -- /* Workaround only required for 100Mbits/sec capable PHYs */ -- if (phydev->supported & PHY_GBIT_FEATURES) -- return 0; -- - /* set shadow mode 2 */ - ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, - MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2); -@@ -270,7 +266,7 @@ static int bcm7xxx_config_init(struct ph - phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555); - - /* reset shadow mode 2 */ -- ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0); -+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2); - if (ret < 0) - return ret; - -@@ -307,11 +303,6 @@ static int bcm7xxx_suspend(struct phy_de - return 0; - } - --static int bcm7xxx_dummy_config_init(struct phy_device *phydev) --{ -- return 0; --} -- - #define BCM7XXX_28NM_GPHY(_oui, _name) \ - { \ - .phy_id = (_oui), \ -@@ -338,7 +329,7 @@ static struct phy_driver bcm7xxx_driver[ - .phy_id = PHY_ID_BCM7425, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7425", -- .features = PHY_GBIT_FEATURES | -+ .features = PHY_BASIC_FEATURES | - SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_config_init, -@@ -351,7 +342,7 @@ static struct phy_driver bcm7xxx_driver[ - .phy_id = PHY_ID_BCM7429, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7429", -- .features = PHY_GBIT_FEATURES | -+ .features = PHY_BASIC_FEATURES | - SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_config_init, -@@ -361,31 +352,18 @@ static struct phy_driver bcm7xxx_driver[ - .resume = bcm7xxx_config_init, - .driver = { .owner = THIS_MODULE }, - }, { -- .phy_id = PHY_BCM_OUI_4, -- .phy_id_mask = 0xffff0000, -- .name = "Broadcom BCM7XXX 40nm", -- .features = PHY_GBIT_FEATURES | -- SUPPORTED_Pause | SUPPORTED_Asym_Pause, -- .flags = PHY_IS_INTERNAL, -- .config_init = bcm7xxx_config_init, -- .config_aneg = genphy_config_aneg, -- .read_status = genphy_read_status, -- .suspend = bcm7xxx_suspend, -- .resume = bcm7xxx_config_init, -- .driver = { .owner = THIS_MODULE }, --}, { -- .phy_id = PHY_BCM_OUI_5, -- .phy_id_mask = 0xffffff00, -- .name = "Broadcom BCM7XXX 65nm", -- .features = PHY_BASIC_FEATURES | -+ .phy_id = PHY_ID_BCM7435, -+ .phy_id_mask = 0xfffffff0, -+ .name = "Broadcom BCM7435", -+ .features = PHY_BASIC_FEATURES | - SUPPORTED_Pause | SUPPORTED_Asym_Pause, -- .flags = PHY_IS_INTERNAL, -- .config_init = bcm7xxx_dummy_config_init, -- .config_aneg = genphy_config_aneg, -- .read_status = genphy_read_status, -- .suspend = bcm7xxx_suspend, -- .resume = bcm7xxx_config_init, -- .driver = { .owner = THIS_MODULE }, -+ .flags = PHY_IS_INTERNAL, -+ .config_init = bcm7xxx_config_init, -+ .config_aneg = genphy_config_aneg, -+ .read_status = genphy_read_status, -+ .suspend = bcm7xxx_suspend, -+ .resume = bcm7xxx_config_init, -+ .driver = { .owner = THIS_MODULE }, - } }; - - static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { -@@ -395,9 +373,8 @@ static struct mdio_device_id __maybe_unu - { PHY_ID_BCM7425, 0xfffffff0, }, - { PHY_ID_BCM7429, 0xfffffff0, }, - { PHY_ID_BCM7439, 0xfffffff0, }, -+ { PHY_ID_BCM7435, 0xfffffff0, }, - { PHY_ID_BCM7445, 0xfffffff0, }, -- { PHY_BCM_OUI_4, 0xffff0000 }, -- { PHY_BCM_OUI_5, 0xffffff00 }, - { } - }; - ---- a/include/linux/brcmphy.h -+++ b/include/linux/brcmphy.h -@@ -26,6 +26,7 @@ - #define PHY_ID_BCM7366 0x600d8490 - #define PHY_ID_BCM7425 0x600d86b0 - #define PHY_ID_BCM7429 0x600d8730 -+#define PHY_ID_BCM7435 0x600d8750 - #define PHY_ID_BCM7439 0x600d8480 - #define PHY_ID_BCM7439_2 0xae025080 - #define PHY_ID_BCM7445 0x600d8510 diff --git a/target/linux/generic/pending-4.4/078-0002-net-phy-update-Broadcom-drivers-to-v4.6.patch b/target/linux/generic/pending-4.4/078-0002-net-phy-update-Broadcom-drivers-to-v4.6.patch deleted file mode 100644 index 4be229b8fa..0000000000 --- a/target/linux/generic/pending-4.4/078-0002-net-phy-update-Broadcom-drivers-to-v4.6.patch +++ /dev/null @@ -1,123 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH 2/4] net: phy: update Broadcom drivers to v4.6 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> ---- - ---- a/drivers/net/phy/bcm7xxx.c -+++ b/drivers/net/phy/bcm7xxx.c -@@ -24,7 +24,7 @@ - #define MII_BCM7XXX_100TX_FALSE_CAR 0x13 - #define MII_BCM7XXX_100TX_DISC 0x14 - #define MII_BCM7XXX_AUX_MODE 0x1d --#define MII_BCM7XX_64CLK_MDIO BIT(12) -+#define MII_BCM7XXX_64CLK_MDIO BIT(12) - #define MII_BCM7XXX_TEST 0x1f - #define MII_BCM7XXX_SHD_MODE_2 BIT(2) - -@@ -247,7 +247,7 @@ static int bcm7xxx_config_init(struct ph - int ret; - - /* Enable 64 clock MDIO */ -- phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO); -+ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO); - phy_read(phydev, MII_BCM7XXX_AUX_MODE); - - /* set shadow mode 2 */ -@@ -318,6 +318,22 @@ static int bcm7xxx_suspend(struct phy_de - .driver = { .owner = THIS_MODULE }, \ - } - -+#define BCM7XXX_40NM_EPHY(_oui, _name) \ -+{ \ -+ .phy_id = (_oui), \ -+ .phy_id_mask = 0xfffffff0, \ -+ .name = _name, \ -+ .features = PHY_BASIC_FEATURES | \ -+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \ -+ .flags = PHY_IS_INTERNAL, \ -+ .config_init = bcm7xxx_config_init, \ -+ .config_aneg = genphy_config_aneg, \ -+ .read_status = genphy_read_status, \ -+ .suspend = bcm7xxx_suspend, \ -+ .resume = bcm7xxx_config_init, \ -+ .driver = { .owner = THIS_MODULE }, \ -+} -+ - static struct phy_driver bcm7xxx_driver[] = { - BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), - BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), -@@ -325,51 +341,19 @@ static struct phy_driver bcm7xxx_driver[ - BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), - BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"), - BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"), --{ -- .phy_id = PHY_ID_BCM7425, -- .phy_id_mask = 0xfffffff0, -- .name = "Broadcom BCM7425", -- .features = PHY_BASIC_FEATURES | -- SUPPORTED_Pause | SUPPORTED_Asym_Pause, -- .flags = PHY_IS_INTERNAL, -- .config_init = bcm7xxx_config_init, -- .config_aneg = genphy_config_aneg, -- .read_status = genphy_read_status, -- .suspend = bcm7xxx_suspend, -- .resume = bcm7xxx_config_init, -- .driver = { .owner = THIS_MODULE }, --}, { -- .phy_id = PHY_ID_BCM7429, -- .phy_id_mask = 0xfffffff0, -- .name = "Broadcom BCM7429", -- .features = PHY_BASIC_FEATURES | -- SUPPORTED_Pause | SUPPORTED_Asym_Pause, -- .flags = PHY_IS_INTERNAL, -- .config_init = bcm7xxx_config_init, -- .config_aneg = genphy_config_aneg, -- .read_status = genphy_read_status, -- .suspend = bcm7xxx_suspend, -- .resume = bcm7xxx_config_init, -- .driver = { .owner = THIS_MODULE }, --}, { -- .phy_id = PHY_ID_BCM7435, -- .phy_id_mask = 0xfffffff0, -- .name = "Broadcom BCM7435", -- .features = PHY_BASIC_FEATURES | -- SUPPORTED_Pause | SUPPORTED_Asym_Pause, -- .flags = PHY_IS_INTERNAL, -- .config_init = bcm7xxx_config_init, -- .config_aneg = genphy_config_aneg, -- .read_status = genphy_read_status, -- .suspend = bcm7xxx_suspend, -- .resume = bcm7xxx_config_init, -- .driver = { .owner = THIS_MODULE }, --} }; -+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"), -+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"), -+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"), -+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"), -+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"), -+}; - - static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { - { PHY_ID_BCM7250, 0xfffffff0, }, - { PHY_ID_BCM7364, 0xfffffff0, }, - { PHY_ID_BCM7366, 0xfffffff0, }, -+ { PHY_ID_BCM7346, 0xfffffff0, }, -+ { PHY_ID_BCM7362, 0xfffffff0, }, - { PHY_ID_BCM7425, 0xfffffff0, }, - { PHY_ID_BCM7429, 0xfffffff0, }, - { PHY_ID_BCM7439, 0xfffffff0, }, ---- a/include/linux/brcmphy.h -+++ b/include/linux/brcmphy.h -@@ -24,6 +24,8 @@ - #define PHY_ID_BCM7250 0xae025280 - #define PHY_ID_BCM7364 0xae025260 - #define PHY_ID_BCM7366 0x600d8490 -+#define PHY_ID_BCM7346 0x600d8650 -+#define PHY_ID_BCM7362 0x600d84b0 - #define PHY_ID_BCM7425 0x600d86b0 - #define PHY_ID_BCM7429 0x600d8730 - #define PHY_ID_BCM7435 0x600d8750 diff --git a/target/linux/generic/pending-4.4/078-0003-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch b/target/linux/generic/pending-4.4/078-0003-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch deleted file mode 100644 index 1d943d605b..0000000000 --- a/target/linux/generic/pending-4.4/078-0003-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch +++ /dev/null @@ -1,315 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] net: phy: cherry-pick Broadcom drivers updates from v4.10 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This includes following upstream commits: -5519da874ad0 net: phy: broadcom: Move bcm54xx_auxctl_{read, write} to common library -b14995ac2527 net: phy: broadcom: Add BCM54810 PHY entry -5b4e29005123 net: phy: broadcom: add bcm54xx_auxctl_read -d92ead16be40 net: phy: broadcom: Add support for BCM54612E -3cf25904fe46 net: phy: broadcom: Update Auxiliary Control Register macros - -Other commits were skipped as they depend on other changes like -ETHTOOL_PHY_DOWNSHIFT & DOWNSHIFT_DEV_DISABLE and new APIs like -get_sset_count. - -One exception was picking new regs from commit d06f78c4232d ("net: phy: -broadcom: Add support code for downshift/Wirespeed"). - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> ---- - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -77,7 +77,7 @@ config BROADCOM_PHY - select BCM_NET_PHYLIB - ---help--- - Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, -- BCM5481 and BCM5482 PHYs. -+ BCM5481, BCM54810 and BCM5482 PHYs. - - config BCM_CYGNUS_PHY - tristate "Drivers for Broadcom Cygnus SoC internal PHY" ---- a/drivers/net/phy/bcm-phy-lib.c -+++ b/drivers/net/phy/bcm-phy-lib.c -@@ -50,6 +50,23 @@ int bcm_phy_read_exp(struct phy_device * - } - EXPORT_SYMBOL_GPL(bcm_phy_read_exp); - -+int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum) -+{ -+ /* The register must be written to both the Shadow Register Select and -+ * the Shadow Read Register Selector -+ */ -+ phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | -+ regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT); -+ return phy_read(phydev, MII_BCM54XX_AUX_CTL); -+} -+EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read); -+ -+int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) -+{ -+ return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); -+} -+EXPORT_SYMBOL(bcm54xx_auxctl_write); -+ - int bcm_phy_write_misc(struct phy_device *phydev, - u16 reg, u16 chl, u16 val) - { ---- a/drivers/net/phy/bcm-phy-lib.h -+++ b/drivers/net/phy/bcm-phy-lib.h -@@ -19,6 +19,9 @@ - int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); - int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); - -+int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val); -+int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum); -+ - int bcm_phy_write_misc(struct phy_device *phydev, - u16 reg, u16 chl, u16 value); - int bcm_phy_read_misc(struct phy_device *phydev, ---- a/drivers/net/phy/broadcom.c -+++ b/drivers/net/phy/broadcom.c -@@ -18,7 +18,7 @@ - #include <linux/module.h> - #include <linux/phy.h> - #include <linux/brcmphy.h> -- -+#include <linux/of.h> - - #define BRCM_PHY_MODEL(phydev) \ - ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask) -@@ -30,9 +30,32 @@ MODULE_DESCRIPTION("Broadcom PHY driver" - MODULE_AUTHOR("Maciej W. Rozycki"); - MODULE_LICENSE("GPL"); - --static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) -+static int bcm54810_config(struct phy_device *phydev) - { -- return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); -+ int rc, val; -+ -+ val = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL); -+ val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN; -+ rc = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL, -+ val); -+ if (rc < 0) -+ return rc; -+ -+ val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); -+ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; -+ val |= MII_BCM54XX_AUXCTL_MISC_WREN; -+ rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, -+ val); -+ if (rc < 0) -+ return rc; -+ -+ val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL); -+ val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN; -+ rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val); -+ if (rc < 0) -+ return rc; -+ -+ return 0; - } - - /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */ -@@ -207,6 +230,12 @@ static int bcm54xx_config_init(struct ph - (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE)) - bcm54xx_adjust_rxrefclk(phydev); - -+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) { -+ err = bcm54810_config(phydev); -+ if (err) -+ return err; -+ } -+ - bcm54xx_phydsp_config(phydev); - - return 0; -@@ -304,6 +333,7 @@ static int bcm5482_read_status(struct ph - - static int bcm5481_config_aneg(struct phy_device *phydev) - { -+ struct device_node *np = phydev->dev.of_node; - int ret; - - /* Aneg firsly. */ -@@ -334,6 +364,49 @@ static int bcm5481_config_aneg(struct ph - phy_write(phydev, 0x18, reg); - } - -+ if (of_property_read_bool(np, "enet-phy-lane-swap")) { -+ /* Lane Swap - Undocumented register...magic! */ -+ ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9, -+ 0x11B); -+ if (ret < 0) -+ return ret; -+ } -+ -+ return ret; -+} -+ -+static int bcm54612e_config_aneg(struct phy_device *phydev) -+{ -+ int ret; -+ -+ /* First, auto-negotiate. */ -+ ret = genphy_config_aneg(phydev); -+ -+ /* Clear TX internal delay unless requested. */ -+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && -+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) { -+ /* Disable TXD to GTXCLK clock delay (default set) */ -+ /* Bit 9 is the only field in shadow register 00011 */ -+ bcm_phy_write_shadow(phydev, 0x03, 0); -+ } -+ -+ /* Clear RX internal delay unless requested. */ -+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && -+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { -+ u16 reg; -+ -+ /* Errata: reads require filling in the write selector field */ -+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, -+ MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC); -+ reg = phy_read(phydev, MII_BCM54XX_AUX_CTL); -+ /* Disable RXD to RXC delay (default set) */ -+ reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW; -+ /* Clear shadow selector field */ -+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK; -+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, -+ MII_BCM54XX_AUXCTL_MISC_WREN | reg); -+ } -+ - return ret; - } - -@@ -488,6 +561,18 @@ static struct phy_driver broadcom_driver - .config_intr = bcm_phy_config_intr, - .driver = { .owner = THIS_MODULE }, - }, { -+ .phy_id = PHY_ID_BCM54612E, -+ .phy_id_mask = 0xfffffff0, -+ .name = "Broadcom BCM54612E", -+ .features = PHY_GBIT_FEATURES | -+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, -+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, -+ .config_init = bcm54xx_config_init, -+ .config_aneg = bcm54612e_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = bcm_phy_ack_intr, -+ .config_intr = bcm_phy_config_intr, -+}, { - .phy_id = PHY_ID_BCM54616S, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM54616S", -@@ -527,6 +612,18 @@ static struct phy_driver broadcom_driver - .config_intr = bcm_phy_config_intr, - .driver = { .owner = THIS_MODULE }, - }, { -+ .phy_id = PHY_ID_BCM54810, -+ .phy_id_mask = 0xfffffff0, -+ .name = "Broadcom BCM54810", -+ .features = PHY_GBIT_FEATURES | -+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, -+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, -+ .config_init = bcm54xx_config_init, -+ .config_aneg = bcm5481_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = bcm_phy_ack_intr, -+ .config_intr = bcm_phy_config_intr, -+}, { - .phy_id = PHY_ID_BCM5482, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM5482", -@@ -612,9 +709,11 @@ static struct mdio_device_id __maybe_unu - { PHY_ID_BCM5411, 0xfffffff0 }, - { PHY_ID_BCM5421, 0xfffffff0 }, - { PHY_ID_BCM5461, 0xfffffff0 }, -+ { PHY_ID_BCM54612E, 0xfffffff0 }, - { PHY_ID_BCM54616S, 0xfffffff0 }, - { PHY_ID_BCM5464, 0xfffffff0 }, - { PHY_ID_BCM5481, 0xfffffff0 }, -+ { PHY_ID_BCM54810, 0xfffffff0 }, - { PHY_ID_BCM5482, 0xfffffff0 }, - { PHY_ID_BCM50610, 0xfffffff0 }, - { PHY_ID_BCM50610M, 0xfffffff0 }, ---- a/include/linux/brcmphy.h -+++ b/include/linux/brcmphy.h -@@ -13,11 +13,13 @@ - #define PHY_ID_BCM5241 0x0143bc30 - #define PHY_ID_BCMAC131 0x0143bc70 - #define PHY_ID_BCM5481 0x0143bca0 -+#define PHY_ID_BCM54810 0x03625d00 - #define PHY_ID_BCM5482 0x0143bcb0 - #define PHY_ID_BCM5411 0x00206070 - #define PHY_ID_BCM5421 0x002060e0 - #define PHY_ID_BCM5464 0x002060b0 - #define PHY_ID_BCM5461 0x002060c0 -+#define PHY_ID_BCM54612E 0x03625e60 - #define PHY_ID_BCM54616S 0x03625d10 - #define PHY_ID_BCM57780 0x03625d90 - -@@ -55,6 +57,7 @@ - #define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000 - #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 - #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 -+ - /* Broadcom BCM7xxx specific workarounds */ - #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) - #define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff) -@@ -105,11 +108,14 @@ - #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 - - #define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 -+#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100 - #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 - #define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 - #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 -+#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 -+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8) - --#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 -+#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007 - - /* - * Broadcom LED source encodings. These are used in BCM5461, BCM5481, -@@ -124,6 +130,7 @@ - #define BCM_LED_SRC_INTR 0x6 - #define BCM_LED_SRC_QUALITY 0x7 - #define BCM_LED_SRC_RCVLED 0x8 -+#define BCM_LED_SRC_WIRESPEED 0x9 - #define BCM_LED_SRC_MULTICOLOR1 0xa - #define BCM_LED_SRC_OPENSHORT 0xb - #define BCM_LED_SRC_OFF 0xe /* Tied high */ -@@ -135,6 +142,14 @@ - * Shadow values go into bits [14:10] of register 0x1c to select a shadow - * register to access. - */ -+ -+/* 00100: Reserved control register 2 */ -+#define BCM54XX_SHD_SCR2 0x04 -+#define BCM54XX_SHD_SCR2_WSPD_RTRY_DIS 0x100 -+#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT 2 -+#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET 2 -+#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK 0x7 -+ - /* 00101: Spare Control Register 3 */ - #define BCM54XX_SHD_SCR3 0x05 - #define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 -@@ -189,6 +204,12 @@ - #define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ - #define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ - -+/* BCM54810 Registers */ -+#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL (MII_BCM54XX_EXP_SEL_ER + 0x90) -+#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0) -+#define BCM54810_SHD_CLK_CTL 0x3 -+#define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9) -+ - - /*****************************************************************************/ - /* Fast Ethernet Transceiver definitions. */ diff --git a/target/linux/generic/pending-4.4/078-0004-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch b/target/linux/generic/pending-4.4/078-0004-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch deleted file mode 100644 index 269c4e7247..0000000000 --- a/target/linux/generic/pending-4.4/078-0004-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch +++ /dev/null @@ -1,283 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] net: phy: cherry-pick Broadcom drivers updates from v4.11 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This includes following upstream commits: -62e13097c46c net: phy: broadcom: rehook BCM54612E specific init -0fc9ae107669 net: phy: broadcom: add support for BCM54210E -5e7bfa6cb0a9 net: phy: bcm-phy-lib: clean up remaining AUXCTL register defines -8293c7bcdef1 net: phy: broadcom: drop duplicated define for RGMII SKEW delay -85b4685da52f net: phy: broadcom: use auxctl reading helper in BCM54612E code -039a7b8592ab net: phy: bcm7xxx: Implement EGPHY workaround for 7278 -582d0ac397ca net: phy: bcm7xxx: Add entry for BCM7278 - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> ---- - ---- a/drivers/net/phy/bcm7xxx.c -+++ b/drivers/net/phy/bcm7xxx.c -@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf - return 0; - } - -+static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev) -+{ -+ /* +1 RC_CAL codes for RL centering for both LT and HT conditions */ -+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003); -+ -+ /* Cut master bias current by 2% to compensate for RC_CAL offset */ -+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b); -+ -+ /* Improve hybrid leakage */ -+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3); -+ -+ /* Change rx_on_tune 8 to 0xf */ -+ bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6); -+ -+ /* Change 100Tx EEE bandwidth */ -+ bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d); -+ -+ /* Enable ffe zero detection for Vitesse interoperability */ -+ bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015); -+ -+ r_rc_cal_reset(phydev); -+ -+ return 0; -+} -+ - static int bcm7xxx_28nm_config_init(struct phy_device *phydev) - { - u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); - u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags); - int ret = 0; - -+ /* Newer devices have moved the revision information back into a -+ * standard location in MII_PHYS_ID[23] -+ */ -+ if (rev == 0) -+ rev = phydev->phy_id & ~phydev->drv->phy_id_mask; -+ - pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n", - dev_name(&phydev->dev), phydev->drv->name, rev, patch); - -@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru - case 0x10: - ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev); - break; -+ case 0x01: -+ ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev); -+ break; - default: - break; - } -@@ -336,6 +370,7 @@ static int bcm7xxx_suspend(struct phy_de - - static struct phy_driver bcm7xxx_driver[] = { - BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), -+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"), - BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), - BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), - BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), -@@ -350,6 +385,7 @@ static struct phy_driver bcm7xxx_driver[ - - static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { - { PHY_ID_BCM7250, 0xfffffff0, }, -+ { PHY_ID_BCM7278, 0xfffffff0, }, - { PHY_ID_BCM7364, 0xfffffff0, }, - { PHY_ID_BCM7366, 0xfffffff0, }, - { PHY_ID_BCM7346, 0xfffffff0, }, ---- a/drivers/net/phy/broadcom.c -+++ b/drivers/net/phy/broadcom.c -@@ -30,6 +30,50 @@ MODULE_DESCRIPTION("Broadcom PHY driver" - MODULE_AUTHOR("Maciej W. Rozycki"); - MODULE_LICENSE("GPL"); - -+static int bcm54210e_config_init(struct phy_device *phydev) -+{ -+ int val; -+ -+ val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); -+ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; -+ val |= MII_BCM54XX_AUXCTL_MISC_WREN; -+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val); -+ -+ val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL); -+ val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN; -+ bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val); -+ -+ return 0; -+} -+ -+static int bcm54612e_config_init(struct phy_device *phydev) -+{ -+ /* Clear TX internal delay unless requested. */ -+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && -+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) { -+ /* Disable TXD to GTXCLK clock delay (default set) */ -+ /* Bit 9 is the only field in shadow register 00011 */ -+ bcm_phy_write_shadow(phydev, 0x03, 0); -+ } -+ -+ /* Clear RX internal delay unless requested. */ -+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && -+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { -+ u16 reg; -+ -+ reg = bcm54xx_auxctl_read(phydev, -+ MII_BCM54XX_AUXCTL_SHDWSEL_MISC); -+ /* Disable RXD to RXC delay (default set) */ -+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; -+ /* Clear shadow selector field */ -+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK; -+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, -+ MII_BCM54XX_AUXCTL_MISC_WREN | reg); -+ } -+ -+ return 0; -+} -+ - static int bcm54810_config(struct phy_device *phydev) - { - int rc, val; -@@ -230,7 +274,15 @@ static int bcm54xx_config_init(struct ph - (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE)) - bcm54xx_adjust_rxrefclk(phydev); - -- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) { -+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) { -+ err = bcm54210e_config_init(phydev); -+ if (err) -+ return err; -+ } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) { -+ err = bcm54612e_config_init(phydev); -+ if (err) -+ return err; -+ } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) { - err = bcm54810_config(phydev); - if (err) - return err; -@@ -375,41 +427,6 @@ static int bcm5481_config_aneg(struct ph - return ret; - } - --static int bcm54612e_config_aneg(struct phy_device *phydev) --{ -- int ret; -- -- /* First, auto-negotiate. */ -- ret = genphy_config_aneg(phydev); -- -- /* Clear TX internal delay unless requested. */ -- if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && -- (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) { -- /* Disable TXD to GTXCLK clock delay (default set) */ -- /* Bit 9 is the only field in shadow register 00011 */ -- bcm_phy_write_shadow(phydev, 0x03, 0); -- } -- -- /* Clear RX internal delay unless requested. */ -- if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && -- (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { -- u16 reg; -- -- /* Errata: reads require filling in the write selector field */ -- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, -- MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC); -- reg = phy_read(phydev, MII_BCM54XX_AUX_CTL); -- /* Disable RXD to RXC delay (default set) */ -- reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW; -- /* Clear shadow selector field */ -- reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK; -- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, -- MII_BCM54XX_AUXCTL_MISC_WREN | reg); -- } -- -- return ret; --} -- - static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set) - { - int val; -@@ -548,6 +565,19 @@ static struct phy_driver broadcom_driver - .config_intr = bcm_phy_config_intr, - .driver = { .owner = THIS_MODULE }, - }, { -+ .phy_id = PHY_ID_BCM54210E, -+ .phy_id_mask = 0xfffffff0, -+ .name = "Broadcom BCM54210E", -+ .features = PHY_GBIT_FEATURES | -+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, -+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, -+ .config_init = bcm54xx_config_init, -+ .config_aneg = genphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = bcm_phy_ack_intr, -+ .config_intr = bcm_phy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+}, { - .phy_id = PHY_ID_BCM5461, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM5461", -@@ -568,7 +598,7 @@ static struct phy_driver broadcom_driver - SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = bcm54xx_config_init, -- .config_aneg = bcm54612e_config_aneg, -+ .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .ack_interrupt = bcm_phy_ack_intr, - .config_intr = bcm_phy_config_intr, -@@ -708,6 +738,7 @@ module_phy_driver(broadcom_drivers); - static struct mdio_device_id __maybe_unused broadcom_tbl[] = { - { PHY_ID_BCM5411, 0xfffffff0 }, - { PHY_ID_BCM5421, 0xfffffff0 }, -+ { PHY_ID_BCM54210E, 0xfffffff0 }, - { PHY_ID_BCM5461, 0xfffffff0 }, - { PHY_ID_BCM54612E, 0xfffffff0 }, - { PHY_ID_BCM54616S, 0xfffffff0 }, ---- a/include/linux/brcmphy.h -+++ b/include/linux/brcmphy.h -@@ -17,6 +17,7 @@ - #define PHY_ID_BCM5482 0x0143bcb0 - #define PHY_ID_BCM5411 0x00206070 - #define PHY_ID_BCM5421 0x002060e0 -+#define PHY_ID_BCM54210E 0x600d84a0 - #define PHY_ID_BCM5464 0x002060b0 - #define PHY_ID_BCM5461 0x002060c0 - #define PHY_ID_BCM54612E 0x03625e60 -@@ -24,6 +25,7 @@ - #define PHY_ID_BCM57780 0x03625d90 - - #define PHY_ID_BCM7250 0xae025280 -+#define PHY_ID_BCM7278 0xae0251a0 - #define PHY_ID_BCM7364 0xae025260 - #define PHY_ID_BCM7366 0x600d8490 - #define PHY_ID_BCM7346 0x600d8650 -@@ -103,18 +105,17 @@ - /* - * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) - */ --#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 -+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00 - #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 - #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 - --#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 --#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100 --#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 --#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 --#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 --#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 --#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8) -+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 -+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 -+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 -+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 -+#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 - -+#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 - #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007 - - /* diff --git a/target/linux/generic/pending-4.4/078-0006-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch b/target/linux/generic/pending-4.4/078-0006-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch deleted file mode 100644 index c39995da7b..0000000000 --- a/target/linux/generic/pending-4.4/078-0006-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch +++ /dev/null @@ -1,37 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] net: phy: cherry-pick Broadcom drivers updates from v4.15 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This includes following upstream commits: -2355a6546a05 net: phy: broadcom: support new device flag for setting master mode - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> ---- - ---- a/drivers/net/phy/broadcom.c -+++ b/drivers/net/phy/broadcom.c -@@ -43,6 +43,12 @@ static int bcm54210e_config_init(struct - val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN; - bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val); - -+ if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) { -+ val = phy_read(phydev, MII_CTRL1000); -+ val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER; -+ phy_write(phydev, MII_CTRL1000, val); -+ } -+ - return 0; - } - ---- a/include/linux/brcmphy.h -+++ b/include/linux/brcmphy.h -@@ -59,6 +59,7 @@ - #define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000 - #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 - #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 -+#define PHY_BRCM_EN_MASTER_MODE 0x00010000 - - /* Broadcom BCM7xxx specific workarounds */ - #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) diff --git a/target/linux/generic/pending-4.4/080-spi-introduce-accelerated-read-support-for-spi-flash.patch b/target/linux/generic/pending-4.4/080-spi-introduce-accelerated-read-support-for-spi-flash.patch deleted file mode 100644 index 5e116b0bbf..0000000000 --- a/target/linux/generic/pending-4.4/080-spi-introduce-accelerated-read-support-for-spi-flash.patch +++ /dev/null @@ -1,179 +0,0 @@ -From 556351f14e74db4cd3ddde386457edce7bf0b27f Mon Sep 17 00:00:00 2001 -From: Vignesh R <vigneshr@ti.com> -Date: Fri, 11 Dec 2015 09:39:56 +0530 -Subject: [PATCH] spi: introduce accelerated read support for spi flash devices - -In addition to providing direct access to SPI bus, some spi controller -hardwares (like ti-qspi) provide special port (like memory mapped port) -that are optimized to improve SPI flash read performance. -This means the controller can automatically send the SPI signals -required to read data from the SPI flash device. -For this, SPI controller needs to know flash specific information like -read command to use, dummy bytes and address width. - -Introduce spi_flash_read() interface to support accelerated read -over SPI flash devices. SPI master drivers can implement this callback to -support interfaces such as memory mapped read etc. m25p80 flash driver -and other flash drivers can call this make use of such interfaces. The -interface should only be used with SPI flashes and cannot be used with -other SPI devices. - -Signed-off-by: Vignesh R <vigneshr@ti.com> -Signed-off-by: Mark Brown <broonie@kernel.org> ---- - ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -1135,6 +1135,7 @@ static void __spi_pump_messages(struct s - } - } - -+ mutex_lock(&master->bus_lock_mutex); - trace_spi_message_start(master->cur_msg); - - if (master->prepare_message) { -@@ -1144,6 +1145,7 @@ static void __spi_pump_messages(struct s - "failed to prepare message: %d\n", ret); - master->cur_msg->status = ret; - spi_finalize_current_message(master); -+ mutex_unlock(&master->bus_lock_mutex); - return; - } - master->cur_msg_prepared = true; -@@ -1153,6 +1155,7 @@ static void __spi_pump_messages(struct s - if (ret) { - master->cur_msg->status = ret; - spi_finalize_current_message(master); -+ mutex_unlock(&master->bus_lock_mutex); - return; - } - -@@ -1160,8 +1163,10 @@ static void __spi_pump_messages(struct s - if (ret) { - dev_err(&master->dev, - "failed to transfer one message from queue\n"); -+ mutex_unlock(&master->bus_lock_mutex); - return; - } -+ mutex_unlock(&master->bus_lock_mutex); - } - - /** -@@ -2329,6 +2334,46 @@ int spi_async_locked(struct spi_device * - EXPORT_SYMBOL_GPL(spi_async_locked); - - -+int spi_flash_read(struct spi_device *spi, -+ struct spi_flash_read_message *msg) -+ -+{ -+ struct spi_master *master = spi->master; -+ int ret; -+ -+ if ((msg->opcode_nbits == SPI_NBITS_DUAL || -+ msg->addr_nbits == SPI_NBITS_DUAL) && -+ !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD))) -+ return -EINVAL; -+ if ((msg->opcode_nbits == SPI_NBITS_QUAD || -+ msg->addr_nbits == SPI_NBITS_QUAD) && -+ !(spi->mode & SPI_TX_QUAD)) -+ return -EINVAL; -+ if (msg->data_nbits == SPI_NBITS_DUAL && -+ !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD))) -+ return -EINVAL; -+ if (msg->data_nbits == SPI_NBITS_QUAD && -+ !(spi->mode & SPI_RX_QUAD)) -+ return -EINVAL; -+ -+ if (master->auto_runtime_pm) { -+ ret = pm_runtime_get_sync(master->dev.parent); -+ if (ret < 0) { -+ dev_err(&master->dev, "Failed to power device: %d\n", -+ ret); -+ return ret; -+ } -+ } -+ mutex_lock(&master->bus_lock_mutex); -+ ret = master->spi_flash_read(spi, msg); -+ mutex_unlock(&master->bus_lock_mutex); -+ if (master->auto_runtime_pm) -+ pm_runtime_put(master->dev.parent); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(spi_flash_read); -+ - /*-------------------------------------------------------------------------*/ - - /* Utility methods for SPI master protocol drivers, layered on ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -25,6 +25,7 @@ - struct dma_chan; - struct spi_master; - struct spi_transfer; -+struct spi_flash_read_message; - - /* - * INTERFACES between SPI master-side drivers and SPI infrastructure. -@@ -361,6 +362,8 @@ static inline void spi_unregister_driver - * @handle_err: the subsystem calls the driver to handle an error that occurs - * in the generic implementation of transfer_one_message(). - * @unprepare_message: undo any work done by prepare_message(). -+ * @spi_flash_read: to support spi-controller hardwares that provide -+ * accelerated interface to read from flash devices. - * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS - * number. Any individual value may be -ENOENT for CS lines that - * are not GPIOs (driven by the SPI controller itself). -@@ -507,6 +510,8 @@ struct spi_master { - struct spi_message *message); - int (*unprepare_message)(struct spi_master *master, - struct spi_message *message); -+ int (*spi_flash_read)(struct spi_device *spi, -+ struct spi_flash_read_message *msg); - - /* - * These hooks are for drivers that use a generic implementation -@@ -999,6 +1004,42 @@ static inline ssize_t spi_w8r16be(struct - return be16_to_cpu(result); - } - -+/** -+ * struct spi_flash_read_message - flash specific information for -+ * spi-masters that provide accelerated flash read interfaces -+ * @buf: buffer to read data -+ * @from: offset within the flash from where data is to be read -+ * @len: length of data to be read -+ * @retlen: actual length of data read -+ * @read_opcode: read_opcode to be used to communicate with flash -+ * @addr_width: number of address bytes -+ * @dummy_bytes: number of dummy bytes -+ * @opcode_nbits: number of lines to send opcode -+ * @addr_nbits: number of lines to send address -+ * @data_nbits: number of lines for data -+ */ -+struct spi_flash_read_message { -+ void *buf; -+ loff_t from; -+ size_t len; -+ size_t retlen; -+ u8 read_opcode; -+ u8 addr_width; -+ u8 dummy_bytes; -+ u8 opcode_nbits; -+ u8 addr_nbits; -+ u8 data_nbits; -+}; -+ -+/* SPI core interface for flash read support */ -+static inline bool spi_flash_read_supported(struct spi_device *spi) -+{ -+ return spi->master->spi_flash_read ? true : false; -+} -+ -+int spi_flash_read(struct spi_device *spi, -+ struct spi_flash_read_message *msg); -+ - /*---------------------------------------------------------------------------*/ - - /* diff --git a/target/linux/generic/pending-4.4/081-spi-bcm53xx-add-spi_flash_read-callback-for-MMIO-bas.patch b/target/linux/generic/pending-4.4/081-spi-bcm53xx-add-spi_flash_read-callback-for-MMIO-bas.patch deleted file mode 100644 index 730f41e4a5..0000000000 --- a/target/linux/generic/pending-4.4/081-spi-bcm53xx-add-spi_flash_read-callback-for-MMIO-bas.patch +++ /dev/null @@ -1,157 +0,0 @@ -From a7b221d8f0d75511c5f959584712a5dd35f88a86 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Mon, 18 Apr 2016 14:39:30 +0200 -Subject: [PATCH] spi: bcm53xx: add spi_flash_read callback for MMIO-based - reads -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This implements more efficient reads of SPI-attached flash content. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Mark Brown <broonie@kernel.org> ---- - ---- a/drivers/spi/spi-bcm53xx.c -+++ b/drivers/spi/spi-bcm53xx.c -@@ -10,6 +10,7 @@ - #include "spi-bcm53xx.h" - - #define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */ -+#define BCM53XXSPI_FLASH_WINDOW SZ_32M - - /* The longest observed required wait was 19 ms */ - #define BCM53XXSPI_SPE_TIMEOUT_MS 80 -@@ -17,8 +18,10 @@ - struct bcm53xxspi { - struct bcma_device *core; - struct spi_master *master; -+ void __iomem *mmio_base; - - size_t read_offset; -+ bool bspi; /* Boot SPI mode with memory mapping */ - }; - - static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset) -@@ -32,6 +35,50 @@ static inline void bcm53xxspi_write(stru - bcma_write32(b53spi->core, offset, value); - } - -+static void bcm53xxspi_disable_bspi(struct bcm53xxspi *b53spi) -+{ -+ struct device *dev = &b53spi->core->dev; -+ unsigned long deadline; -+ u32 tmp; -+ -+ if (!b53spi->bspi) -+ return; -+ -+ tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL); -+ if (tmp & 0x1) -+ return; -+ -+ deadline = jiffies + usecs_to_jiffies(200); -+ do { -+ tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_BUSY_STATUS); -+ if (!(tmp & 0x1)) { -+ bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, -+ 0x1); -+ ndelay(200); -+ b53spi->bspi = false; -+ return; -+ } -+ udelay(1); -+ } while (!time_after_eq(jiffies, deadline)); -+ -+ dev_warn(dev, "Timeout disabling BSPI\n"); -+} -+ -+static void bcm53xxspi_enable_bspi(struct bcm53xxspi *b53spi) -+{ -+ u32 tmp; -+ -+ if (b53spi->bspi) -+ return; -+ -+ tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL); -+ if (!(tmp & 0x1)) -+ return; -+ -+ bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, 0x0); -+ b53spi->bspi = true; -+} -+ - static inline unsigned int bcm53xxspi_calc_timeout(size_t len) - { - /* Do some magic calculation based on length and buad. Add 10% and 1. */ -@@ -176,6 +223,8 @@ static int bcm53xxspi_transfer_one(struc - u8 *buf; - size_t left; - -+ bcm53xxspi_disable_bspi(b53spi); -+ - if (t->tx_buf) { - buf = (u8 *)t->tx_buf; - left = t->len; -@@ -206,6 +255,22 @@ static int bcm53xxspi_transfer_one(struc - return 0; - } - -+static int bcm53xxspi_flash_read(struct spi_device *spi, -+ struct spi_flash_read_message *msg) -+{ -+ struct bcm53xxspi *b53spi = spi_master_get_devdata(spi->master); -+ int ret = 0; -+ -+ if (msg->from + msg->len > BCM53XXSPI_FLASH_WINDOW) -+ return -EINVAL; -+ -+ bcm53xxspi_enable_bspi(b53spi); -+ memcpy_fromio(msg->buf, b53spi->mmio_base + msg->from, msg->len); -+ msg->retlen = msg->len; -+ -+ return ret; -+} -+ - /************************************************** - * BCMA - **************************************************/ -@@ -222,6 +287,7 @@ MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcm - - static int bcm53xxspi_bcma_probe(struct bcma_device *core) - { -+ struct device *dev = &core->dev; - struct bcm53xxspi *b53spi; - struct spi_master *master; - int err; -@@ -231,7 +297,7 @@ static int bcm53xxspi_bcma_probe(struct - return -ENOTSUPP; - } - -- master = spi_alloc_master(&core->dev, sizeof(*b53spi)); -+ master = spi_alloc_master(dev, sizeof(*b53spi)); - if (!master) - return -ENOMEM; - -@@ -239,11 +305,19 @@ static int bcm53xxspi_bcma_probe(struct - b53spi->master = master; - b53spi->core = core; - -+ if (core->addr_s[0]) -+ b53spi->mmio_base = devm_ioremap(dev, core->addr_s[0], -+ BCM53XXSPI_FLASH_WINDOW); -+ b53spi->bspi = true; -+ bcm53xxspi_disable_bspi(b53spi); -+ - master->transfer_one = bcm53xxspi_transfer_one; -+ if (b53spi->mmio_base) -+ master->spi_flash_read = bcm53xxspi_flash_read; - - bcma_set_drvdata(core, b53spi); - -- err = devm_spi_register_master(&core->dev, master); -+ err = devm_spi_register_master(dev, master); - if (err) { - spi_master_put(master); - bcma_set_drvdata(core, NULL); diff --git a/target/linux/generic/pending-4.4/082-0001-USB-core-let-USB-device-know-device-node.patch b/target/linux/generic/pending-4.4/082-0001-USB-core-let-USB-device-know-device-node.patch deleted file mode 100644 index 901cdf7e83..0000000000 --- a/target/linux/generic/pending-4.4/082-0001-USB-core-let-USB-device-know-device-node.patch +++ /dev/null @@ -1,179 +0,0 @@ -From 69bec725985324e79b1c47ea287815ac4ddb0521 Mon Sep 17 00:00:00 2001 -From: Peter Chen <peter.chen@freescale.com> -Date: Fri, 19 Feb 2016 17:26:15 +0800 -Subject: [PATCH] USB: core: let USB device know device node - -Although most of USB devices are hot-plug's, there are still some devices -are hard wired on the board, eg, for HSIC and SSIC interface USB devices. -If these kinds of USB devices are multiple functions, and they can supply -other interfaces like i2c, gpios for other devices, we may need to -describe these at device tree. - -In this commit, it uses "reg" in dts as physical port number to match -the phyiscal port number decided by USB core, if they are the same, -then the device node is for the device we are creating for USB core. - -Signed-off-by: Peter Chen <peter.chen@freescale.com> -Acked-by: Philipp Zabel <p.zabel@pengutronix.de> -Acked-by: Alan Stern <stern@rowland.harvard.edu> -Acked-by: Rob Herring <robh@kernel.org> -Acked-by: Arnd Bergmann <arnd@arndb.de> -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---- - .../devicetree/bindings/usb/usb-device.txt | 28 +++++++++++++ - drivers/usb/core/Makefile | 2 +- - drivers/usb/core/of.c | 47 ++++++++++++++++++++++ - drivers/usb/core/usb.c | 10 +++++ - include/linux/usb/of.h | 7 ++++ - 5 files changed, 93 insertions(+), 1 deletion(-) - create mode 100644 Documentation/devicetree/bindings/usb/usb-device.txt - create mode 100644 drivers/usb/core/of.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/usb/usb-device.txt -@@ -0,0 +1,28 @@ -+Generic USB Device Properties -+ -+Usually, we only use device tree for hard wired USB device. -+The reference binding doc is from: -+http://www.firmware.org/1275/bindings/usb/usb-1_0.ps -+ -+Required properties: -+- compatible: usbVID,PID. The textual representation of VID, PID shall -+ be in lower case hexadecimal with leading zeroes suppressed. The -+ other compatible strings from the above standard binding could also -+ be used, but a device adhering to this binding may leave out all except -+ for usbVID,PID. -+- reg: the port number which this device is connecting to, the range -+ is 1-31. -+ -+Example: -+ -+&usb1 { -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hub: genesys@1 { -+ compatible = "usb5e3,608"; -+ reg = <1>; -+ }; -+} ---- a/drivers/usb/core/Makefile -+++ b/drivers/usb/core/Makefile -@@ -5,7 +5,7 @@ - usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o - usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o - usbcore-y += devio.o notify.o generic.o quirks.o devices.o --usbcore-y += port.o -+usbcore-y += port.o of.o - - usbcore-$(CONFIG_PCI) += hcd-pci.o - usbcore-$(CONFIG_ACPI) += usb-acpi.o ---- /dev/null -+++ b/drivers/usb/core/of.c -@@ -0,0 +1,47 @@ -+/* -+ * of.c The helpers for hcd device tree support -+ * -+ * Copyright (C) 2016 Freescale Semiconductor, Inc. -+ * Author: Peter Chen <peter.chen@freescale.com> -+ * -+ * This program is free software: you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 of -+ * the License as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#include <linux/of.h> -+ -+/** -+ * usb_of_get_child_node - Find the device node match port number -+ * @parent: the parent device node -+ * @portnum: the port number which device is connecting -+ * -+ * Find the node from device tree according to its port number. -+ * -+ * Return: On success, a pointer to the device node, %NULL on failure. -+ */ -+struct device_node *usb_of_get_child_node(struct device_node *parent, -+ int portnum) -+{ -+ struct device_node *node; -+ u32 port; -+ -+ for_each_child_of_node(parent, node) { -+ if (!of_property_read_u32(node, "reg", &port)) { -+ if (port == portnum) -+ return node; -+ } -+ } -+ -+ return NULL; -+} -+EXPORT_SYMBOL_GPL(usb_of_get_child_node); -+ ---- a/drivers/usb/core/usb.c -+++ b/drivers/usb/core/usb.c -@@ -36,6 +36,7 @@ - #include <linux/mutex.h> - #include <linux/workqueue.h> - #include <linux/debugfs.h> -+#include <linux/usb/of.h> - - #include <asm/io.h> - #include <linux/scatterlist.h> -@@ -469,6 +470,7 @@ struct usb_device *usb_alloc_dev(struct - dev->route = 0; - - dev->dev.parent = bus->controller; -+ dev->dev.of_node = bus->controller->of_node; - dev_set_name(&dev->dev, "usb%d", bus->busnum); - root_hub = 1; - } else { -@@ -493,6 +495,14 @@ struct usb_device *usb_alloc_dev(struct - dev->dev.parent = &parent->dev; - dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath); - -+ if (!parent->parent) { -+ /* device under root hub's port */ -+ port1 = usb_hcd_find_raw_port_number(usb_hcd, -+ port1); -+ } -+ dev->dev.of_node = usb_of_get_child_node(parent->dev.of_node, -+ port1); -+ - /* hub driver sets up TT records */ - } - ---- a/include/linux/usb/of.h -+++ b/include/linux/usb/of.h -@@ -15,6 +15,8 @@ - bool of_usb_host_tpl_support(struct device_node *np); - int of_usb_update_otg_caps(struct device_node *np, - struct usb_otg_caps *otg_caps); -+struct device_node *usb_of_get_child_node(struct device_node *parent, -+ int portnum); - #else - static inline bool of_usb_host_tpl_support(struct device_node *np) - { -@@ -25,6 +27,11 @@ static inline int of_usb_update_otg_caps - { - return 0; - } -+static inline struct device_node *usb_of_get_child_node -+ (struct device_node *parent, int portnum) -+{ -+ return NULL; -+} - #endif - - #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_SUPPORT) diff --git a/target/linux/generic/pending-4.4/082-0002-usb-core-usb_alloc_dev-fix-setting-of-portnum.patch b/target/linux/generic/pending-4.4/082-0002-usb-core-usb_alloc_dev-fix-setting-of-portnum.patch deleted file mode 100644 index 15cf4cae56..0000000000 --- a/target/linux/generic/pending-4.4/082-0002-usb-core-usb_alloc_dev-fix-setting-of-portnum.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 7222c832254a75dcd67d683df75753d4a4e125bb Mon Sep 17 00:00:00 2001 -From: Nicolai Stange <nicstange@gmail.com> -Date: Thu, 17 Mar 2016 23:53:02 +0100 -Subject: [PATCH] usb/core: usb_alloc_dev(): fix setting of ->portnum - -With commit 69bec7259853 ("USB: core: let USB device know device node"), -the port1 argument of usb_alloc_dev() gets overwritten as follows: - - ... usb_alloc_dev(..., unsigned port1) - { - ... - if (!parent->parent) { - port1 = usb_hcd_find_raw_port_number(..., port1); - } - ... - } - -Later on, this now overwritten port1 gets assigned to ->portnum: - - dev->portnum = port1; - -However, since xhci_find_raw_port_number() isn't idempotent, the -aforementioned commit causes a number of KASAN splats like the following: - - BUG: KASAN: slab-out-of-bounds in xhci_find_raw_port_number+0x98/0x170 - at addr ffff8801d9311670 - Read of size 8 by task kworker/2:1/87 - [...] - Workqueue: usb_hub_wq hub_event - 0000000000000188 000000005814b877 ffff8800cba17588 ffffffff8191447e - 0000000041b58ab3 ffffffff82a03209 ffffffff819143a2 ffffffff82a252f4 - ffff8801d93115e0 0000000000000188 ffff8801d9311628 ffff8800cba17588 - Call Trace: - [<ffffffff8191447e>] dump_stack+0xdc/0x15e - [<ffffffff819143a2>] ? _atomic_dec_and_lock+0xa2/0xa2 - [<ffffffff814e2cd1>] ? print_section+0x61/0xb0 - [<ffffffff814e4939>] print_trailer+0x179/0x2c0 - [<ffffffff814f0d84>] object_err+0x34/0x40 - [<ffffffff814f4388>] kasan_report_error+0x2f8/0x8b0 - [<ffffffff814eb91e>] ? __slab_alloc+0x5e/0x90 - [<ffffffff812178c0>] ? __lock_is_held+0x90/0x130 - [<ffffffff814f5091>] kasan_report+0x71/0xa0 - [<ffffffff814ec082>] ? kmem_cache_alloc_trace+0x212/0x560 - [<ffffffff81d99468>] ? xhci_find_raw_port_number+0x98/0x170 - [<ffffffff814f33d4>] __asan_load8+0x64/0x70 - [<ffffffff81d99468>] xhci_find_raw_port_number+0x98/0x170 - [<ffffffff81db0105>] xhci_setup_addressable_virt_dev+0x235/0xa10 - [<ffffffff81d9ea51>] xhci_setup_device+0x3c1/0x1430 - [<ffffffff8121cddd>] ? trace_hardirqs_on+0xd/0x10 - [<ffffffff81d9fac0>] ? xhci_setup_device+0x1430/0x1430 - [<ffffffff81d9fad3>] xhci_address_device+0x13/0x20 - [<ffffffff81d2081a>] hub_port_init+0x55a/0x1550 - [<ffffffff81d28705>] hub_event+0xef5/0x24d0 - [<ffffffff81d27810>] ? hub_port_debounce+0x2f0/0x2f0 - [<ffffffff8195e1ee>] ? debug_object_deactivate+0x1be/0x270 - [<ffffffff81210203>] ? print_rt_rq+0x53/0x2d0 - [<ffffffff8121657d>] ? trace_hardirqs_off+0xd/0x10 - [<ffffffff8226acfb>] ? _raw_spin_unlock_irqrestore+0x5b/0x60 - [<ffffffff81250000>] ? irq_domain_set_hwirq_and_chip+0x30/0xb0 - [<ffffffff81256339>] ? debug_lockdep_rcu_enabled+0x39/0x40 - [<ffffffff812178c0>] ? __lock_is_held+0x90/0x130 - [<ffffffff81196877>] process_one_work+0x567/0xec0 - [...] - -Afterwards, xhci reports some functional errors: - - xhci_hcd 0000:00:14.0: ERROR: unexpected setup address command completion - code 0x11. - xhci_hcd 0000:00:14.0: ERROR: unexpected setup address command completion - code 0x11. - usb 4-3: device not accepting address 2, error -22 - -Fix this by not overwriting the port1 argument in usb_alloc_dev(), but -storing the raw port number as required by OF in an additional variable, -raw_port. - -Fixes: 69bec7259853 ("USB: core: let USB device know device node") -Signed-off-by: Nicolai Stange <nicstange@gmail.com> -Acked-by: Alan Stern <stern@rowland.harvard.edu> -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---- - drivers/usb/core/usb.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/usb/core/usb.c -+++ b/drivers/usb/core/usb.c -@@ -423,6 +423,7 @@ struct usb_device *usb_alloc_dev(struct - struct usb_device *dev; - struct usb_hcd *usb_hcd = bus_to_hcd(bus); - unsigned root_hub = 0; -+ unsigned raw_port = port1; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) -@@ -497,11 +498,11 @@ struct usb_device *usb_alloc_dev(struct - - if (!parent->parent) { - /* device under root hub's port */ -- port1 = usb_hcd_find_raw_port_number(usb_hcd, -+ raw_port = usb_hcd_find_raw_port_number(usb_hcd, - port1); - } - dev->dev.of_node = usb_of_get_child_node(parent->dev.of_node, -- port1); -+ raw_port); - - /* hub driver sets up TT records */ - } diff --git a/target/linux/generic/pending-4.4/083-0001-clk-Add-devm_-clk_hw_-register-unregister-APIs.patch b/target/linux/generic/pending-4.4/083-0001-clk-Add-devm_-clk_hw_-register-unregister-APIs.patch deleted file mode 100644 index 0408353138..0000000000 --- a/target/linux/generic/pending-4.4/083-0001-clk-Add-devm_-clk_hw_-register-unregister-APIs.patch +++ /dev/null @@ -1,182 +0,0 @@ -From 4143804c4fdef40358c654d1fb2271a1a0f1fedf Mon Sep 17 00:00:00 2001 -From: Stephen Boyd <sboyd@codeaurora.org> -Date: Fri, 5 Feb 2016 17:02:52 -0800 -Subject: [PATCH] clk: Add {devm_}clk_hw_{register,unregister}() APIs - -We've largely split the clk consumer and provider APIs along -struct clk and struct clk_hw, but clk_register() still returns a -struct clk pointer for each struct clk_hw that's registered. -Eventually we'd like to only allocate struct clks when there's a -user, because struct clk is per-user now, so clk_register() needs -to change. - -Let's add new APIs to register struct clk_hws, but this time -we'll hide the struct clk from the caller by returning an int -error code. Also add an unregistration API that takes the clk_hw -structure that was passed to the registration API. This way -provider drivers never have to deal with a struct clk pointer -unless they're using the clk consumer APIs. - -Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> ---- - Documentation/driver-model/devres.txt | 1 + - drivers/clk/clk.c | 86 +++++++++++++++++++++++++++++++++++ - include/linux/clk-provider.h | 6 +++ - 3 files changed, 93 insertions(+) - ---- a/Documentation/driver-model/devres.txt -+++ b/Documentation/driver-model/devres.txt -@@ -236,6 +236,7 @@ certainly invest a bit more effort into - CLOCK - devm_clk_get() - devm_clk_put() -+ devm_clk_hw_register() - - DMA - dmam_alloc_coherent() ---- a/drivers/clk/clk.c -+++ b/drivers/clk/clk.c -@@ -2595,6 +2595,22 @@ fail_out: - } - EXPORT_SYMBOL_GPL(clk_register); - -+/** -+ * clk_hw_register - register a clk_hw and return an error code -+ * @dev: device that is registering this clock -+ * @hw: link to hardware-specific clock data -+ * -+ * clk_hw_register is the primary interface for populating the clock tree with -+ * new clock nodes. It returns an integer equal to zero indicating success or -+ * less than zero indicating failure. Drivers must test for an error code after -+ * calling clk_hw_register(). -+ */ -+int clk_hw_register(struct device *dev, struct clk_hw *hw) -+{ -+ return PTR_ERR_OR_ZERO(clk_register(dev, hw)); -+} -+EXPORT_SYMBOL_GPL(clk_hw_register); -+ - /* Free memory allocated for a clock. */ - static void __clk_release(struct kref *ref) - { -@@ -2696,11 +2712,26 @@ void clk_unregister(struct clk *clk) - } - EXPORT_SYMBOL_GPL(clk_unregister); - -+/** -+ * clk_hw_unregister - unregister a currently registered clk_hw -+ * @hw: hardware-specific clock data to unregister -+ */ -+void clk_hw_unregister(struct clk_hw *hw) -+{ -+ clk_unregister(hw->clk); -+} -+EXPORT_SYMBOL_GPL(clk_hw_unregister); -+ - static void devm_clk_release(struct device *dev, void *res) - { - clk_unregister(*(struct clk **)res); - } - -+static void devm_clk_hw_release(struct device *dev, void *res) -+{ -+ clk_hw_unregister(*(struct clk_hw **)res); -+} -+ - /** - * devm_clk_register - resource managed clk_register() - * @dev: device that is registering this clock -@@ -2731,6 +2762,36 @@ struct clk *devm_clk_register(struct dev - } - EXPORT_SYMBOL_GPL(devm_clk_register); - -+/** -+ * devm_clk_hw_register - resource managed clk_hw_register() -+ * @dev: device that is registering this clock -+ * @hw: link to hardware-specific clock data -+ * -+ * Managed clk_hw_register(). Clocks returned from this function are -+ * automatically clk_hw_unregister()ed on driver detach. See clk_hw_register() -+ * for more information. -+ */ -+int devm_clk_hw_register(struct device *dev, struct clk_hw *hw) -+{ -+ struct clk_hw **hwp; -+ int ret; -+ -+ hwp = devres_alloc(devm_clk_hw_release, sizeof(*hwp), GFP_KERNEL); -+ if (!hwp) -+ return -ENOMEM; -+ -+ ret = clk_hw_register(dev, hw); -+ if (!ret) { -+ *hwp = hw; -+ devres_add(dev, hwp); -+ } else { -+ devres_free(hwp); -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(devm_clk_hw_register); -+ - static int devm_clk_match(struct device *dev, void *res, void *data) - { - struct clk *c = res; -@@ -2739,6 +2800,15 @@ static int devm_clk_match(struct device - return c == data; - } - -+static int devm_clk_hw_match(struct device *dev, void *res, void *data) -+{ -+ struct clk_hw *hw = res; -+ -+ if (WARN_ON(!hw)) -+ return 0; -+ return hw == data; -+} -+ - /** - * devm_clk_unregister - resource managed clk_unregister() - * @clk: clock to unregister -@@ -2753,6 +2823,22 @@ void devm_clk_unregister(struct device * - } - EXPORT_SYMBOL_GPL(devm_clk_unregister); - -+/** -+ * devm_clk_hw_unregister - resource managed clk_hw_unregister() -+ * @dev: device that is unregistering the hardware-specific clock data -+ * @hw: link to hardware-specific clock data -+ * -+ * Unregister a clk_hw registered with devm_clk_hw_register(). Normally -+ * this function will not need to be called and the resource management -+ * code will ensure that the resource is freed. -+ */ -+void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw) -+{ -+ WARN_ON(devres_release(dev, devm_clk_hw_release, devm_clk_hw_match, -+ hw)); -+} -+EXPORT_SYMBOL_GPL(devm_clk_hw_unregister); -+ - /* - * clkdev helpers - */ ---- a/include/linux/clk-provider.h -+++ b/include/linux/clk-provider.h -@@ -639,9 +639,15 @@ void of_gpio_mux_clk_setup(struct device - struct clk *clk_register(struct device *dev, struct clk_hw *hw); - struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw); - -+int __must_check clk_hw_register(struct device *dev, struct clk_hw *hw); -+int __must_check devm_clk_hw_register(struct device *dev, struct clk_hw *hw); -+ - void clk_unregister(struct clk *clk); - void devm_clk_unregister(struct device *dev, struct clk *clk); - -+void clk_hw_unregister(struct clk_hw *hw); -+void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw); -+ - /* helper functions */ - const char *__clk_get_name(const struct clk *clk); - const char *clk_hw_get_name(const struct clk_hw *hw); diff --git a/target/linux/generic/pending-4.4/083-0002-clk-Add-clk_hw-OF-clk-providers.patch b/target/linux/generic/pending-4.4/083-0002-clk-Add-clk_hw-OF-clk-providers.patch deleted file mode 100644 index 0bcb5bb805..0000000000 --- a/target/linux/generic/pending-4.4/083-0002-clk-Add-clk_hw-OF-clk-providers.patch +++ /dev/null @@ -1,234 +0,0 @@ -From 0861e5b8cf80038e91942f1005c8dfce79d18c38 Mon Sep 17 00:00:00 2001 -From: Stephen Boyd <sboyd@codeaurora.org> -Date: Fri, 5 Feb 2016 17:38:26 -0800 -Subject: [PATCH] clk: Add clk_hw OF clk providers - -Now that we have a clk registration API that doesn't return -struct clks, we need to have some way to hand out struct clks via -the clk_get() APIs that doesn't involve associating struct clk -pointers with an OF node. Currently we ask the OF provider to -give us a struct clk pointer for some clkspec, turn that struct -clk into a struct clk_hw and then allocate a new struct clk to -return to the caller. - -Let's add a clk_hw based OF provider hook that returns a struct -clk_hw directly, so that we skip the intermediate step of -converting from struct clk to struct clk_hw. Eventually when -we've converted all OF clk providers to struct clk_hw based APIs -we can remove the struct clk based ones. - -It should also be noted that we change the onecell provider to -have a flex array instead of a pointer for the array of clk_hw -pointers. This allows providers to allocate one structure of the -correct length in one step instead of two. - -Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> ---- - drivers/clk/clk.c | 85 +++++++++++++++++++++++++++++++++++++++++--- - include/linux/clk-provider.h | 30 ++++++++++++++++ - 2 files changed, 111 insertions(+), 4 deletions(-) - ---- a/drivers/clk/clk.c -+++ b/drivers/clk/clk.c -@@ -3001,6 +3001,7 @@ struct of_clk_provider { - - struct device_node *node; - struct clk *(*get)(struct of_phandle_args *clkspec, void *data); -+ struct clk_hw *(*get_hw)(struct of_phandle_args *clkspec, void *data); - void *data; - }; - -@@ -3017,6 +3018,12 @@ struct clk *of_clk_src_simple_get(struct - } - EXPORT_SYMBOL_GPL(of_clk_src_simple_get); - -+struct clk_hw *of_clk_hw_simple_get(struct of_phandle_args *clkspec, void *data) -+{ -+ return data; -+} -+EXPORT_SYMBOL_GPL(of_clk_hw_simple_get); -+ - struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data) - { - struct clk_onecell_data *clk_data = data; -@@ -3031,6 +3038,21 @@ struct clk *of_clk_src_onecell_get(struc - } - EXPORT_SYMBOL_GPL(of_clk_src_onecell_get); - -+struct clk_hw * -+of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data) -+{ -+ struct clk_hw_onecell_data *hw_data = data; -+ unsigned int idx = clkspec->args[0]; -+ -+ if (idx >= hw_data->num) { -+ pr_err("%s: invalid index %u\n", __func__, idx); -+ return ERR_PTR(-EINVAL); -+ } -+ -+ return hw_data->hws[idx]; -+} -+EXPORT_SYMBOL_GPL(of_clk_hw_onecell_get); -+ - /** - * of_clk_add_provider() - Register a clock provider for a node - * @np: Device node pointer associated with clock provider -@@ -3067,6 +3089,41 @@ int of_clk_add_provider(struct device_no - EXPORT_SYMBOL_GPL(of_clk_add_provider); - - /** -+ * of_clk_add_hw_provider() - Register a clock provider for a node -+ * @np: Device node pointer associated with clock provider -+ * @get: callback for decoding clk_hw -+ * @data: context pointer for @get callback. -+ */ -+int of_clk_add_hw_provider(struct device_node *np, -+ struct clk_hw *(*get)(struct of_phandle_args *clkspec, -+ void *data), -+ void *data) -+{ -+ struct of_clk_provider *cp; -+ int ret; -+ -+ cp = kzalloc(sizeof(*cp), GFP_KERNEL); -+ if (!cp) -+ return -ENOMEM; -+ -+ cp->node = of_node_get(np); -+ cp->data = data; -+ cp->get_hw = get; -+ -+ mutex_lock(&of_clk_mutex); -+ list_add(&cp->link, &of_clk_providers); -+ mutex_unlock(&of_clk_mutex); -+ pr_debug("Added clk_hw provider from %s\n", np->full_name); -+ -+ ret = of_clk_set_defaults(np, true); -+ if (ret < 0) -+ of_clk_del_provider(np); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(of_clk_add_hw_provider); -+ -+/** - * of_clk_del_provider() - Remove a previously registered clock provider - * @np: Device node pointer associated with clock provider - */ -@@ -3087,11 +3144,32 @@ void of_clk_del_provider(struct device_n - } - EXPORT_SYMBOL_GPL(of_clk_del_provider); - -+static struct clk_hw * -+__of_clk_get_hw_from_provider(struct of_clk_provider *provider, -+ struct of_phandle_args *clkspec) -+{ -+ struct clk *clk; -+ struct clk_hw *hw = ERR_PTR(-EPROBE_DEFER); -+ -+ if (provider->get_hw) { -+ hw = provider->get_hw(clkspec, provider->data); -+ } else if (provider->get) { -+ clk = provider->get(clkspec, provider->data); -+ if (!IS_ERR(clk)) -+ hw = __clk_get_hw(clk); -+ else -+ hw = ERR_CAST(clk); -+ } -+ -+ return hw; -+} -+ - struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec, - const char *dev_id, const char *con_id) - { - struct of_clk_provider *provider; - struct clk *clk = ERR_PTR(-EPROBE_DEFER); -+ struct clk_hw *hw = ERR_PTR(-EPROBE_DEFER); - - if (!clkspec) - return ERR_PTR(-EINVAL); -@@ -3100,10 +3178,9 @@ struct clk *__of_clk_get_from_provider(s - mutex_lock(&of_clk_mutex); - list_for_each_entry(provider, &of_clk_providers, link) { - if (provider->node == clkspec->np) -- clk = provider->get(clkspec, provider->data); -- if (!IS_ERR(clk)) { -- clk = __clk_create_clk(__clk_get_hw(clk), dev_id, -- con_id); -+ hw = __of_clk_get_hw_from_provider(provider, clkspec); -+ if (!IS_ERR(hw)) { -+ clk = __clk_create_clk(hw, dev_id, con_id); - - if (!IS_ERR(clk) && !__clk_get(clk)) { - __clk_free_clk(clk); ---- a/include/linux/clk-provider.h -+++ b/include/linux/clk-provider.h -@@ -693,6 +693,11 @@ struct clk_onecell_data { - unsigned int clk_num; - }; - -+struct clk_hw_onecell_data { -+ size_t num; -+ struct clk_hw *hws[]; -+}; -+ - extern struct of_device_id __clk_of_table; - - #define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn) -@@ -702,10 +707,19 @@ int of_clk_add_provider(struct device_no - struct clk *(*clk_src_get)(struct of_phandle_args *args, - void *data), - void *data); -+int of_clk_add_hw_provider(struct device_node *np, -+ struct clk_hw *(*get)(struct of_phandle_args *clkspec, -+ void *data), -+ void *data); - void of_clk_del_provider(struct device_node *np); - struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, - void *data); -+ -+struct clk_hw *of_clk_hw_simple_get(struct of_phandle_args *clkspec, -+ void *data); - struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); -+struct clk_hw *of_clk_hw_onecell_get(struct of_phandle_args *clkspec, -+ void *data); - int of_clk_get_parent_count(struct device_node *np); - int of_clk_parent_fill(struct device_node *np, const char **parents, - unsigned int size); -@@ -722,6 +736,13 @@ static inline int of_clk_add_provider(st - { - return 0; - } -+static inline int of_clk_add_hw_provider(struct device_node *np, -+ struct clk_hw *(*get)(struct of_phandle_args *clkspec, -+ void *data), -+ void *data) -+{ -+ return 0; -+} - #define of_clk_del_provider(np) \ - { while (0); } - static inline struct clk *of_clk_src_simple_get( -@@ -729,11 +750,21 @@ static inline struct clk *of_clk_src_sim - { - return ERR_PTR(-ENOENT); - } -+static inline struct clk_hw * -+of_clk_hw_simple_get(struct of_phandle_args *clkspec, void *data) -+{ -+ return ERR_PTR(-ENOENT); -+} - static inline struct clk *of_clk_src_onecell_get( - struct of_phandle_args *clkspec, void *data) - { - return ERR_PTR(-ENOENT); - } -+static inline struct clk_hw * -+of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data) -+{ -+ return ERR_PTR(-ENOENT); -+} - static inline int of_clk_get_parent_count(struct device_node *np) - { - return 0; diff --git a/target/linux/generic/pending-4.4/084-0001-usb-core-Introduce-a-USB-port-LED-trigger.patch b/target/linux/generic/pending-4.4/084-0001-usb-core-Introduce-a-USB-port-LED-trigger.patch deleted file mode 100644 index 68039f67bb..0000000000 --- a/target/linux/generic/pending-4.4/084-0001-usb-core-Introduce-a-USB-port-LED-trigger.patch +++ /dev/null @@ -1,465 +0,0 @@ -From 0f247626cbbfa2010d2b86fdee652605e084e248 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 16 Sep 2016 16:13:48 +0200 -Subject: [PATCH] usb: core: Introduce a USB port LED trigger -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds a new trigger responsible for turning on LED when USB -device gets connected to the selected USB port. This can can useful for -various home routers that have USB port(s) and a proper LED telling user -a device is connected. - -The trigger gets its documentation file but basically it just requires -enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). - -There was a long discussion on design of this driver. Its current state -is a result of picking them most adjustable solution as others couldn't -handle all cases. - -1) It wasn't possible for the driver to register separated trigger for - each USB port. Some physical USB ports are handled by more than one - controller and so by more than one USB port. E.g. USB 2.0 physical - port may be handled by OHCI's port and EHCI's port. - It's also not possible to assign more than 1 trigger to a single LED - and implementing such feature would be tricky due to syncing triggers - and sysfs conflicts with old triggers. - -2) Another idea was to register trigger per USB hub. This wouldn't allow - handling devices with multiple USB LEDs and controllers (hubs) - controlling more than 1 physical port. It's common for hubs to have - few ports and each may have its own LED. - -This final trigger is highly flexible. It allows selecting any USB ports -for any LED. It was also modified (comparing to the initial version) to -allow choosing ports rather than having user /guess/ proper names. It -was successfully tested on SmartRG SR400ac which has 3 USB LEDs, -2 physical ports and 3 controllers. - -It was noted USB subsystem already has usb-gadget and usb-host triggers -but they are pretty trivial ones. They indicate activity only and can't -have ports specified. - -In future it may be good idea to consider adding activity support to -usbport as well. This should allow switching to this more generic driver -and maybe marking old ones as obsolete. -This can be implemented with another sysfs file for setting mode. The -default mode wouldn't change so there won't be ABI breakage and so such -feature can be safely implemented later. - -There was also an idea of supporting other devices (PCI, SDIO, etc.) but -as this driver already contains some USB specific code (and will get -more) these should be probably separated drivers (triggers). - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---- - .../ABI/testing/sysfs-class-led-trigger-usbport | 12 + - Documentation/leds/ledtrig-usbport.txt | 41 +++ - drivers/usb/core/Kconfig | 8 + - drivers/usb/core/Makefile | 2 + - drivers/usb/core/ledtrig-usbport.c | 314 +++++++++++++++++++++ - 5 files changed, 377 insertions(+) - create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-usbport - create mode 100644 Documentation/leds/ledtrig-usbport.txt - create mode 100644 drivers/usb/core/ledtrig-usbport.c - ---- /dev/null -+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport -@@ -0,0 +1,12 @@ -+What: /sys/class/leds/<led>/ports/<port> -+Date: September 2016 -+KernelVersion: 4.9 -+Contact: linux-leds@vger.kernel.org -+ linux-usb@vger.kernel.org -+Description: -+ Every dir entry represents a single USB port that can be -+ selected for the USB port trigger. Selecting ports makes trigger -+ observing them for any connected devices and lighting on LED if -+ there are any. -+ Echoing "1" value selects USB port. Echoing "0" unselects it. -+ Current state can be also read. ---- /dev/null -+++ b/Documentation/leds/ledtrig-usbport.txt -@@ -0,0 +1,41 @@ -+USB port LED trigger -+==================== -+ -+This LED trigger can be used for signalling to the user a presence of USB device -+in a given port. It simply turns on LED when device appears and turns it off -+when it disappears. -+ -+It requires selecting USB ports that should be observed. All available ones are -+listed as separated entries in a "ports" subdirectory. Selecting is handled by -+echoing "1" to a chosen port. -+ -+Please note that this trigger allows selecting multiple USB ports for a single -+LED. This can be useful in two cases: -+ -+1) Device with single USB LED and few physical ports -+ -+In such a case LED will be turned on as long as there is at least one connected -+USB device. -+ -+2) Device with a physical port handled by few controllers -+ -+Some devices may have one controller per PHY standard. E.g. USB 3.0 physical -+port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is -+only one LED user will most likely want to assign ports from all 3 hubs. -+ -+ -+This trigger can be activated from user space on led class devices as shown -+below: -+ -+ echo usbport > trigger -+ -+This adds sysfs attributes to the LED that are documented in: -+Documentation/ABI/testing/sysfs-class-led-trigger-usbport -+ -+Example use-case: -+ -+ echo usbport > trigger -+ echo 1 > ports/usb1-port1 -+ echo 1 > ports/usb2-port1 -+ cat ports/usb1-port1 -+ echo 0 > ports/usb1-port1 ---- a/drivers/usb/core/Kconfig -+++ b/drivers/usb/core/Kconfig -@@ -103,3 +103,11 @@ config USB_ULPI_BUS - - To compile this driver as a module, choose M here: the module will - be called ulpi. -+ -+config USB_LEDS_TRIGGER_USBPORT -+ tristate "USB port LED trigger" -+ depends on USB && LEDS_TRIGGERS -+ help -+ This driver allows LEDs to be controlled by USB events. Enabling this -+ trigger allows specifying list of USB ports that should turn on LED -+ when some USB device gets connected. ---- a/drivers/usb/core/Makefile -+++ b/drivers/usb/core/Makefile -@@ -11,3 +11,5 @@ usbcore-$(CONFIG_PCI) += hcd-pci.o - usbcore-$(CONFIG_ACPI) += usb-acpi.o - - obj-$(CONFIG_USB) += usbcore.o -+ -+obj-$(CONFIG_USB_LEDS_TRIGGER_USBPORT) += ledtrig-usbport.o ---- /dev/null -+++ b/drivers/usb/core/ledtrig-usbport.c -@@ -0,0 +1,314 @@ -+/* -+ * USB port LED trigger -+ * -+ * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/device.h> -+#include <linux/leds.h> -+#include <linux/module.h> -+#include <linux/slab.h> -+#include <linux/usb.h> -+ -+struct usbport_trig_data { -+ struct led_classdev *led_cdev; -+ struct list_head ports; -+ struct notifier_block nb; -+ int count; /* Amount of connected matching devices */ -+}; -+ -+struct usbport_trig_port { -+ struct usbport_trig_data *data; -+ struct usb_device *hub; -+ int portnum; -+ char *port_name; -+ bool observed; -+ struct device_attribute attr; -+ struct list_head list; -+}; -+ -+/*************************************** -+ * Helpers -+ ***************************************/ -+ -+/** -+ * usbport_trig_usb_dev_observed - Check if dev is connected to observed port -+ */ -+static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data, -+ struct usb_device *usb_dev) -+{ -+ struct usbport_trig_port *port; -+ -+ if (!usb_dev->parent) -+ return false; -+ -+ list_for_each_entry(port, &usbport_data->ports, list) { -+ if (usb_dev->parent == port->hub && -+ usb_dev->portnum == port->portnum) -+ return port->observed; -+ } -+ -+ return false; -+} -+ -+static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data) -+{ -+ struct usbport_trig_data *usbport_data = data; -+ -+ if (usbport_trig_usb_dev_observed(usbport_data, usb_dev)) -+ usbport_data->count++; -+ -+ return 0; -+} -+ -+/** -+ * usbport_trig_update_count - Recalculate amount of connected matching devices -+ */ -+static void usbport_trig_update_count(struct usbport_trig_data *usbport_data) -+{ -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ -+ usbport_data->count = 0; -+ usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check); -+ led_cdev->brightness_set(led_cdev, -+ usbport_data->count ? LED_FULL : LED_OFF); -+} -+ -+/*************************************** -+ * Device attr -+ ***************************************/ -+ -+static ssize_t usbport_trig_port_show(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct usbport_trig_port *port = container_of(attr, -+ struct usbport_trig_port, -+ attr); -+ -+ return sprintf(buf, "%d\n", port->observed) + 1; -+} -+ -+static ssize_t usbport_trig_port_store(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t size) -+{ -+ struct usbport_trig_port *port = container_of(attr, -+ struct usbport_trig_port, -+ attr); -+ -+ if (!strcmp(buf, "0") || !strcmp(buf, "0\n")) -+ port->observed = 0; -+ else if (!strcmp(buf, "1") || !strcmp(buf, "1\n")) -+ port->observed = 1; -+ else -+ return -EINVAL; -+ -+ usbport_trig_update_count(port->data); -+ -+ return size; -+} -+ -+static struct attribute *ports_attrs[] = { -+ NULL, -+}; -+static const struct attribute_group ports_group = { -+ .name = "ports", -+ .attrs = ports_attrs, -+}; -+ -+/*************************************** -+ * Adding & removing ports -+ ***************************************/ -+ -+static int usbport_trig_add_port(struct usbport_trig_data *usbport_data, -+ struct usb_device *usb_dev, -+ const char *hub_name, int portnum) -+{ -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ struct usbport_trig_port *port; -+ size_t len; -+ int err; -+ -+ port = kzalloc(sizeof(*port), GFP_KERNEL); -+ if (!port) { -+ err = -ENOMEM; -+ goto err_out; -+ } -+ -+ port->data = usbport_data; -+ port->hub = usb_dev; -+ port->portnum = portnum; -+ -+ len = strlen(hub_name) + 8; -+ port->port_name = kzalloc(len, GFP_KERNEL); -+ if (!port->port_name) { -+ err = -ENOMEM; -+ goto err_free_port; -+ } -+ snprintf(port->port_name, len, "%s-port%d", hub_name, portnum); -+ -+ port->attr.attr.name = port->port_name; -+ port->attr.attr.mode = S_IRUSR | S_IWUSR; -+ port->attr.show = usbport_trig_port_show; -+ port->attr.store = usbport_trig_port_store; -+ -+ err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr, -+ ports_group.name); -+ if (err) -+ goto err_free_port_name; -+ -+ list_add_tail(&port->list, &usbport_data->ports); -+ -+ return 0; -+ -+err_free_port_name: -+ kfree(port->port_name); -+err_free_port: -+ kfree(port); -+err_out: -+ return err; -+} -+ -+static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev, -+ void *data) -+{ -+ struct usbport_trig_data *usbport_data = data; -+ int i; -+ -+ for (i = 1; i <= usb_dev->maxchild; i++) -+ usbport_trig_add_port(usbport_data, usb_dev, -+ dev_name(&usb_dev->dev), i); -+ -+ return 0; -+} -+ -+static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data, -+ struct usbport_trig_port *port) -+{ -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ -+ list_del(&port->list); -+ sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr, -+ ports_group.name); -+ kfree(port->port_name); -+ kfree(port); -+} -+ -+static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data, -+ struct usb_device *usb_dev) -+{ -+ struct usbport_trig_port *port, *tmp; -+ -+ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { -+ if (port->hub == usb_dev) -+ usbport_trig_remove_port(usbport_data, port); -+ } -+} -+ -+/*************************************** -+ * Init, exit, etc. -+ ***************************************/ -+ -+static int usbport_trig_notify(struct notifier_block *nb, unsigned long action, -+ void *data) -+{ -+ struct usbport_trig_data *usbport_data = -+ container_of(nb, struct usbport_trig_data, nb); -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ struct usb_device *usb_dev = data; -+ bool observed; -+ -+ observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev); -+ -+ switch (action) { -+ case USB_DEVICE_ADD: -+ usbport_trig_add_usb_dev_ports(usb_dev, usbport_data); -+ if (observed && usbport_data->count++ == 0) -+ led_cdev->brightness_set(led_cdev, LED_FULL); -+ return NOTIFY_OK; -+ case USB_DEVICE_REMOVE: -+ usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev); -+ if (observed && --usbport_data->count == 0) -+ led_cdev->brightness_set(led_cdev, LED_OFF); -+ return NOTIFY_OK; -+ } -+ -+ return NOTIFY_DONE; -+} -+ -+static void usbport_trig_activate(struct led_classdev *led_cdev) -+{ -+ struct usbport_trig_data *usbport_data; -+ int err; -+ -+ usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL); -+ if (!usbport_data) -+ return; -+ usbport_data->led_cdev = led_cdev; -+ -+ /* List of ports */ -+ INIT_LIST_HEAD(&usbport_data->ports); -+ err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group); -+ if (err) -+ goto err_free; -+ usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports); -+ -+ /* Notifications */ -+ usbport_data->nb.notifier_call = usbport_trig_notify, -+ led_cdev->trigger_data = usbport_data; -+ usb_register_notify(&usbport_data->nb); -+ -+ led_cdev->activated = true; -+ return; -+ -+err_free: -+ kfree(usbport_data); -+} -+ -+static void usbport_trig_deactivate(struct led_classdev *led_cdev) -+{ -+ struct usbport_trig_data *usbport_data = led_cdev->trigger_data; -+ struct usbport_trig_port *port, *tmp; -+ -+ if (!led_cdev->activated) -+ return; -+ -+ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { -+ usbport_trig_remove_port(usbport_data, port); -+ } -+ -+ usb_unregister_notify(&usbport_data->nb); -+ -+ sysfs_remove_group(&led_cdev->dev->kobj, &ports_group); -+ -+ kfree(usbport_data); -+ -+ led_cdev->activated = false; -+} -+ -+static struct led_trigger usbport_led_trigger = { -+ .name = "usbport", -+ .activate = usbport_trig_activate, -+ .deactivate = usbport_trig_deactivate, -+}; -+ -+static int __init usbport_trig_init(void) -+{ -+ return led_trigger_register(&usbport_led_trigger); -+} -+ -+static void __exit usbport_trig_exit(void) -+{ -+ led_trigger_unregister(&usbport_led_trigger); -+} -+ -+module_init(usbport_trig_init); -+module_exit(usbport_trig_exit); -+ -+MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl>"); -+MODULE_DESCRIPTION("USB port trigger"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/pending-4.4/084-0002-usb-core-usbport-Use-proper-LED-API-to-fix-potential.patch b/target/linux/generic/pending-4.4/084-0002-usb-core-usbport-Use-proper-LED-API-to-fix-potential.patch deleted file mode 100644 index ec41a2dc21..0000000000 --- a/target/linux/generic/pending-4.4/084-0002-usb-core-usbport-Use-proper-LED-API-to-fix-potential.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 89778ba335e302a450932ce5b703c1ee6216e949 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 6 Dec 2016 00:39:33 +0100 -Subject: [PATCH] usb: core: usbport: Use proper LED API to fix potential crash -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Calling brightness_set manually isn't safe as some LED drivers don't -implement this callback. The best idea is to just use a proper helper -which will fallback to the brightness_set_blocking callback if needed. - -This fixes: -[ 1461.761528] Unable to handle kernel NULL pointer dereference at virtual address 00000000 -(...) -[ 1462.117049] Backtrace: -[ 1462.119521] [<bf228164>] (usbport_trig_port_store [ledtrig_usbport]) from [<c023f758>] (dev_attr_store+0x20/0x2c) -[ 1462.129826] r7:dcabc7c0 r6:dee0ff80 r5:00000002 r4:bf228164 -[ 1462.135511] [<c023f738>] (dev_attr_store) from [<c0169310>] (sysfs_kf_write+0x48/0x4c) -[ 1462.143459] r5:00000002 r4:c023f738 -[ 1462.147049] [<c01692c8>] (sysfs_kf_write) from [<c0168ab8>] (kernfs_fop_write+0xf8/0x1f8) -[ 1462.155258] r5:00000002 r4:df4a1000 -[ 1462.158850] [<c01689c0>] (kernfs_fop_write) from [<c0100c78>] (__vfs_write+0x34/0x120) -[ 1462.166800] r10:00000000 r9:dee0e000 r8:c000fc24 r7:00000002 r6:dee0ff80 r5:c01689c0 -[ 1462.174660] r4:df727a80 -[ 1462.177204] [<c0100c44>] (__vfs_write) from [<c0101ae4>] (vfs_write+0xac/0x170) -[ 1462.184543] r9:dee0e000 r8:c000fc24 r7:dee0ff80 r6:b6f092d0 r5:df727a80 r4:00000002 -[ 1462.192319] [<c0101a38>] (vfs_write) from [<c01028dc>] (SyS_write+0x4c/0xa8) -[ 1462.199396] r9:dee0e000 r8:c000fc24 r7:00000002 r6:b6f092d0 r5:df727a80 r4:df727a80 -[ 1462.207174] [<c0102890>] (SyS_write) from [<c000fa60>] (ret_fast_syscall+0x0/0x3c) -[ 1462.214774] r7:00000004 r6:ffffffff r5:00000000 r4:00000000 -[ 1462.220456] Code: bad PC value -[ 1462.223560] ---[ end trace 676638a3a12c7a56 ]--- - -Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Fixes: 0f247626cbb ("usb: core: Introduce a USB port LED trigger") -Cc: stable@vger.kernel.org # 4.9+ -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---- - drivers/usb/core/ledtrig-usbport.c | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - ---- a/drivers/usb/core/ledtrig-usbport.c -+++ b/drivers/usb/core/ledtrig-usbport.c -@@ -74,8 +74,7 @@ static void usbport_trig_update_count(st - - usbport_data->count = 0; - usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check); -- led_cdev->brightness_set(led_cdev, -- usbport_data->count ? LED_FULL : LED_OFF); -+ led_set_brightness(led_cdev, usbport_data->count ? LED_FULL : LED_OFF); - } - - /*************************************** -@@ -228,12 +227,12 @@ static int usbport_trig_notify(struct no - case USB_DEVICE_ADD: - usbport_trig_add_usb_dev_ports(usb_dev, usbport_data); - if (observed && usbport_data->count++ == 0) -- led_cdev->brightness_set(led_cdev, LED_FULL); -+ led_set_brightness(led_cdev, LED_FULL); - return NOTIFY_OK; - case USB_DEVICE_REMOVE: - usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev); - if (observed && --usbport_data->count == 0) -- led_cdev->brightness_set(led_cdev, LED_OFF); -+ led_set_brightness(led_cdev, LED_OFF); - return NOTIFY_OK; - } - diff --git a/target/linux/generic/pending-4.4/084-0003-usb-core-read-USB-ports-from-DT-in-the-usbport-LED-t.patch b/target/linux/generic/pending-4.4/084-0003-usb-core-read-USB-ports-from-DT-in-the-usbport-LED-t.patch deleted file mode 100644 index 65d17c8a9e..0000000000 --- a/target/linux/generic/pending-4.4/084-0003-usb-core-read-USB-ports-from-DT-in-the-usbport-LED-t.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 4f04c210d031667e503d6538a72345a36f3b5d71 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 8 Jun 2017 18:08:32 +0200 -Subject: [PATCH] usb: core: read USB ports from DT in the usbport LED trigger - driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This uses DT info to read relation description of LEDs and USB ports. If -DT has properly described LEDs, trigger will know when to turn them on. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---- - drivers/usb/core/ledtrig-usbport.c | 56 ++++++++++++++++++++++++++++++++++++++ - 1 file changed, 56 insertions(+) - ---- a/drivers/usb/core/ledtrig-usbport.c -+++ b/drivers/usb/core/ledtrig-usbport.c -@@ -11,8 +11,10 @@ - #include <linux/device.h> - #include <linux/leds.h> - #include <linux/module.h> -+#include <linux/of.h> - #include <linux/slab.h> - #include <linux/usb.h> -+#include <linux/usb/of.h> - - struct usbport_trig_data { - struct led_classdev *led_cdev; -@@ -123,6 +125,57 @@ static const struct attribute_group port - * Adding & removing ports - ***************************************/ - -+/** -+ * usbport_trig_port_observed - Check if port should be observed -+ */ -+static bool usbport_trig_port_observed(struct usbport_trig_data *usbport_data, -+ struct usb_device *usb_dev, int port1) -+{ -+ struct device *dev = usbport_data->led_cdev->dev; -+ struct device_node *led_np = dev->of_node; -+ struct of_phandle_args args; -+ struct device_node *port_np; -+ int count, i; -+ -+ if (!led_np) -+ return false; -+ -+ /* Get node of port being added */ -+ port_np = usb_of_get_child_node(usb_dev->dev.of_node, port1); -+ if (!port_np) -+ return false; -+ -+ /* Amount of trigger sources for this LED */ -+ count = of_count_phandle_with_args(led_np, "trigger-sources", -+ "#trigger-source-cells"); -+ if (count < 0) { -+ dev_warn(dev, "Failed to get trigger sources for %s\n", -+ led_np->full_name); -+ return false; -+ } -+ -+ /* Check list of sources for this specific port */ -+ for (i = 0; i < count; i++) { -+ int err; -+ -+ err = of_parse_phandle_with_args(led_np, "trigger-sources", -+ "#trigger-source-cells", i, -+ &args); -+ if (err) { -+ dev_err(dev, "Failed to get trigger source phandle at index %d: %d\n", -+ i, err); -+ continue; -+ } -+ -+ of_node_put(args.np); -+ -+ if (args.np == port_np) -+ return true; -+ } -+ -+ return false; -+} -+ - static int usbport_trig_add_port(struct usbport_trig_data *usbport_data, - struct usb_device *usb_dev, - const char *hub_name, int portnum) -@@ -141,6 +194,8 @@ static int usbport_trig_add_port(struct - port->data = usbport_data; - port->hub = usb_dev; - port->portnum = portnum; -+ port->observed = usbport_trig_port_observed(usbport_data, usb_dev, -+ portnum); - - len = strlen(hub_name) + 8; - port->port_name = kzalloc(len, GFP_KERNEL); -@@ -255,6 +310,7 @@ static void usbport_trig_activate(struct - if (err) - goto err_free; - usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports); -+ usbport_trig_update_count(usbport_data); - - /* Notifications */ - usbport_data->nb.notifier_call = usbport_trig_notify, diff --git a/target/linux/generic/pending-4.4/085-0001-leds-leds-gpio-Set-of_node-for-created-LED-devices.patch b/target/linux/generic/pending-4.4/085-0001-leds-leds-gpio-Set-of_node-for-created-LED-devices.patch deleted file mode 100644 index f60b1fc16b..0000000000 --- a/target/linux/generic/pending-4.4/085-0001-leds-leds-gpio-Set-of_node-for-created-LED-devices.patch +++ /dev/null @@ -1,53 +0,0 @@ -From bff23714bc36a1322d0f14519022df0d1a4b21f3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Fri, 8 Jul 2016 14:53:38 +0200 -Subject: [PATCH] leds: leds-gpio: Set of_node for created LED devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -When working with Device Tree we iterate over children of "gpio-leds" -compatible node and create LED device for each of them. We take care of -all common DT properties (label, default trigger, state, etc.), however -some triggers may want to support more of them. - -It could be useful for timer trigger to support setting delay on/off -values with Device Tree property. Or for transient trigger to support -e.g. duration property. - -We obviously should handle such properties in triggers, not in generic -code. To let trigger drivers read properties from DT node we need to set -of_node to point the relevant node. This change allows using all kind of -of helpers in e.g. "activate" callbacks. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> ---- - drivers/leds/leds-gpio.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -182,6 +182,7 @@ static struct gpio_leds_priv *gpio_leds_ - return ERR_PTR(-ENOMEM); - - device_for_each_child_node(dev, child) { -+ struct gpio_led_data *led_dat = &priv->leds[priv->num_leds]; - struct gpio_led led = {}; - const char *state = NULL; - -@@ -220,12 +221,12 @@ static struct gpio_leds_priv *gpio_leds_ - if (fwnode_property_present(child, "retain-state-suspended")) - led.retain_state_suspended = 1; - -- ret = create_gpio_led(&led, &priv->leds[priv->num_leds], -- dev, NULL); -+ ret = create_gpio_led(&led, led_dat, dev, NULL); - if (ret < 0) { - fwnode_handle_put(child); - goto err; - } -+ led_dat->cdev.dev->of_node = np; - priv->num_leds++; - } - diff --git a/target/linux/generic/pending-4.4/085-0002-leds-gpio-introduce-gpio_blink_set_t.patch b/target/linux/generic/pending-4.4/085-0002-leds-gpio-introduce-gpio_blink_set_t.patch deleted file mode 100644 index 670d4ba91f..0000000000 --- a/target/linux/generic/pending-4.4/085-0002-leds-gpio-introduce-gpio_blink_set_t.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 68620e594c250ba8c43a78e77f5296cb9952582e Mon Sep 17 00:00:00 2001 -From: Heiner Kallweit <hkallweit1@gmail.com> -Date: Wed, 14 Sep 2016 20:54:12 +0200 -Subject: [PATCH] leds: gpio: introduce gpio_blink_set_t - -Introduce a typedef gpio_blink_set_t to improve readability of the code. - -Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> -Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> ---- - drivers/leds/leds-gpio.c | 6 ++---- - include/linux/leds.h | 9 ++++++--- - 2 files changed, 8 insertions(+), 7 deletions(-) - ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -29,8 +29,7 @@ struct gpio_led_data { - u8 new_level; - u8 can_sleep; - u8 blinking; -- int (*platform_gpio_blink_set)(struct gpio_desc *desc, int state, -- unsigned long *delay_on, unsigned long *delay_off); -+ gpio_blink_set_t platform_gpio_blink_set; - }; - - static void gpio_led_work(struct work_struct *work) -@@ -88,8 +87,7 @@ static int gpio_blink_set(struct led_cla - - static int create_gpio_led(const struct gpio_led *template, - struct gpio_led_data *led_dat, struct device *parent, -- int (*blink_set)(struct gpio_desc *, int, unsigned long *, -- unsigned long *)) -+ gpio_blink_set_t blink_set) - { - int ret, state; - ---- a/include/linux/leds.h -+++ b/include/linux/leds.h -@@ -330,6 +330,11 @@ struct led_platform_data { - struct led_info *leds; - }; - -+struct gpio_desc; -+typedef int (*gpio_blink_set_t)(struct gpio_desc *desc, int state, -+ unsigned long *delay_on, -+ unsigned long *delay_off); -+ - /* For the leds-gpio driver */ - struct gpio_led { - const char *name; -@@ -352,9 +357,7 @@ struct gpio_led_platform_data { - #define GPIO_LED_NO_BLINK_LOW 0 /* No blink GPIO state low */ - #define GPIO_LED_NO_BLINK_HIGH 1 /* No blink GPIO state high */ - #define GPIO_LED_BLINK 2 /* Please, blink */ -- int (*gpio_blink_set)(struct gpio_desc *desc, int state, -- unsigned long *delay_on, -- unsigned long *delay_off); -+ gpio_blink_set_t gpio_blink_set; - }; - - struct platform_device *gpio_led_register_device( diff --git a/target/linux/generic/pending-4.4/085-0003-leds-gpio-switch-to-managed-version-of-led_classdev_.patch b/target/linux/generic/pending-4.4/085-0003-leds-gpio-switch-to-managed-version-of-led_classdev_.patch deleted file mode 100644 index 7aa865aa83..0000000000 --- a/target/linux/generic/pending-4.4/085-0003-leds-gpio-switch-to-managed-version-of-led_classdev_.patch +++ /dev/null @@ -1,75 +0,0 @@ -From bc2c0dd85a0a31505ca2f92bef891ddac9126725 Mon Sep 17 00:00:00 2001 -From: Heiner Kallweit <hkallweit1@gmail.com> -Date: Wed, 14 Sep 2016 20:55:27 +0200 -Subject: [PATCH] leds: gpio: switch to managed version of - led_classdev_register - -Using the managed version of led_classdev_register allows to -significantly simplify the code. - -Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> -Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> ---- - drivers/leds/leds-gpio.c | 23 ++--------------------- - 1 file changed, 2 insertions(+), 21 deletions(-) - ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -143,7 +143,7 @@ static int create_gpio_led(const struct - - INIT_WORK(&led_dat->work, gpio_led_work); - -- return led_classdev_register(parent, &led_dat->cdev); -+ return devm_led_classdev_register(parent, &led_dat->cdev); - } - - static void delete_gpio_led(struct gpio_led_data *led) -@@ -231,8 +231,6 @@ static struct gpio_leds_priv *gpio_leds_ - return priv; - - err: -- for (count = priv->num_leds - 1; count >= 0; count--) -- delete_gpio_led(&priv->leds[count]); - return ERR_PTR(ret); - } - -@@ -261,12 +259,8 @@ static int gpio_led_probe(struct platfor - ret = create_gpio_led(&pdata->leds[i], - &priv->leds[i], - &pdev->dev, pdata->gpio_blink_set); -- if (ret < 0) { -- /* On failure: unwind the led creations */ -- for (i = i - 1; i >= 0; i--) -- delete_gpio_led(&priv->leds[i]); -+ if (ret < 0) - return ret; -- } - } - } else { - priv = gpio_leds_create(pdev); -@@ -279,17 +273,6 @@ static int gpio_led_probe(struct platfor - return 0; - } - --static int gpio_led_remove(struct platform_device *pdev) --{ -- struct gpio_leds_priv *priv = platform_get_drvdata(pdev); -- int i; -- -- for (i = 0; i < priv->num_leds; i++) -- delete_gpio_led(&priv->leds[i]); -- -- return 0; --} -- - static void gpio_led_shutdown(struct platform_device *pdev) - { - struct gpio_leds_priv *priv = platform_get_drvdata(pdev); -@@ -304,7 +287,6 @@ static void gpio_led_shutdown(struct pla - - static struct platform_driver gpio_led_driver = { - .probe = gpio_led_probe, -- .remove = gpio_led_remove, - .shutdown = gpio_led_shutdown, - .driver = { - .name = "leds-gpio", diff --git a/target/linux/generic/pending-4.4/085-0004-leds-core-add-OF-variants-of-LED-registering-functio.patch b/target/linux/generic/pending-4.4/085-0004-leds-core-add-OF-variants-of-LED-registering-functio.patch deleted file mode 100644 index e02984041a..0000000000 --- a/target/linux/generic/pending-4.4/085-0004-leds-core-add-OF-variants-of-LED-registering-functio.patch +++ /dev/null @@ -1,120 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 6 Mar 2017 06:19:44 +0100 -Subject: [PATCH] leds: core: add OF variants of LED registering functions -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -These new functions allow passing an additional device_node argument -that will be internally set for created LED device. Thanks to this LED -core code and triggers will be able to access DT node for reading extra -info. - -The easiest solution for achieving this was reworking old functions to -more generic ones & adding simple defines for API compatibility. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Acked-by: Pavel Machek <pavel@ucw.cz> -Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> ---- - drivers/leds/led-class.c | 26 ++++++++++++++++---------- - include/linux/leds.h | 14 ++++++++++---- - 2 files changed, 26 insertions(+), 14 deletions(-) - ---- a/drivers/leds/led-class.c -+++ b/drivers/leds/led-class.c -@@ -181,11 +181,14 @@ static int led_classdev_next_name(const - } - - /** -- * led_classdev_register - register a new object of led_classdev class. -- * @parent: The device to register. -+ * of_led_classdev_register - register a new object of led_classdev class. -+ * -+ * @parent: parent of LED device - * @led_cdev: the led_classdev structure for this device. -+ * @np: DT node describing this LED - */ --int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) -+int of_led_classdev_register(struct device *parent, struct device_node *np, -+ struct led_classdev *led_cdev) - { - char name[64]; - int ret; -@@ -198,6 +201,7 @@ int led_classdev_register(struct device - led_cdev, led_cdev->groups, "%s", name); - if (IS_ERR(led_cdev->dev)) - return PTR_ERR(led_cdev->dev); -+ led_cdev->dev->of_node = np; - - if (ret) - dev_warn(parent, "Led %s renamed to %s due to name collision", -@@ -230,7 +234,7 @@ int led_classdev_register(struct device - - return 0; - } --EXPORT_SYMBOL_GPL(led_classdev_register); -+EXPORT_SYMBOL_GPL(of_led_classdev_register); - - /** - * led_classdev_unregister - unregisters a object of led_properties class. -@@ -269,12 +273,14 @@ static void devm_led_classdev_release(st - } - - /** -- * devm_led_classdev_register - resource managed led_classdev_register() -- * @parent: The device to register. -+ * devm_of_led_classdev_register - resource managed led_classdev_register() -+ * -+ * @parent: parent of LED device - * @led_cdev: the led_classdev structure for this device. - */ --int devm_led_classdev_register(struct device *parent, -- struct led_classdev *led_cdev) -+int devm_of_led_classdev_register(struct device *parent, -+ struct device_node *np, -+ struct led_classdev *led_cdev) - { - struct led_classdev **dr; - int rc; -@@ -283,7 +289,7 @@ int devm_led_classdev_register(struct de - if (!dr) - return -ENOMEM; - -- rc = led_classdev_register(parent, led_cdev); -+ rc = of_led_classdev_register(parent, np, led_cdev); - if (rc) { - devres_free(dr); - return rc; -@@ -294,7 +300,7 @@ int devm_led_classdev_register(struct de - - return 0; - } --EXPORT_SYMBOL_GPL(devm_led_classdev_register); -+EXPORT_SYMBOL_GPL(devm_of_led_classdev_register); - - static int devm_led_classdev_match(struct device *dev, void *res, void *data) - { ---- a/include/linux/leds.h -+++ b/include/linux/leds.h -@@ -103,10 +103,16 @@ struct led_classdev { - struct mutex led_access; - }; - --extern int led_classdev_register(struct device *parent, -- struct led_classdev *led_cdev); --extern int devm_led_classdev_register(struct device *parent, -- struct led_classdev *led_cdev); -+extern int of_led_classdev_register(struct device *parent, -+ struct device_node *np, -+ struct led_classdev *led_cdev); -+#define led_classdev_register(parent, led_cdev) \ -+ of_led_classdev_register(parent, NULL, led_cdev) -+extern int devm_of_led_classdev_register(struct device *parent, -+ struct device_node *np, -+ struct led_classdev *led_cdev); -+#define devm_led_classdev_register(parent, led_cdev) \ -+ devm_of_led_classdev_register(parent, NULL, led_cdev) - extern void led_classdev_unregister(struct led_classdev *led_cdev); - extern void devm_led_classdev_unregister(struct device *parent, - struct led_classdev *led_cdev); diff --git a/target/linux/generic/pending-4.4/085-0005-leds-gpio-use-OF-variant-of-LED-registering-function.patch b/target/linux/generic/pending-4.4/085-0005-leds-gpio-use-OF-variant-of-LED-registering-function.patch deleted file mode 100644 index 159fae84f4..0000000000 --- a/target/linux/generic/pending-4.4/085-0005-leds-gpio-use-OF-variant-of-LED-registering-function.patch +++ /dev/null @@ -1,60 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 6 Mar 2017 06:19:45 +0100 -Subject: [PATCH] leds: gpio: use OF variant of LED registering function -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -In leds-gpio we support LEDs specified in DT so we should use -(devm_)of_led_classdev_register. This allows passing DT node as argument -for use by the LED subsystem. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Acked-by: Pavel Machek <pavel@ucw.cz> -Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> ---- - drivers/leds/leds-gpio.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -87,7 +87,7 @@ static int gpio_blink_set(struct led_cla - - static int create_gpio_led(const struct gpio_led *template, - struct gpio_led_data *led_dat, struct device *parent, -- gpio_blink_set_t blink_set) -+ struct device_node *np, gpio_blink_set_t blink_set) - { - int ret, state; - -@@ -143,7 +143,7 @@ static int create_gpio_led(const struct - - INIT_WORK(&led_dat->work, gpio_led_work); - -- return devm_led_classdev_register(parent, &led_dat->cdev); -+ return devm_of_led_classdev_register(parent, np, &led_dat->cdev); - } - - static void delete_gpio_led(struct gpio_led_data *led) -@@ -219,7 +219,7 @@ static struct gpio_leds_priv *gpio_leds_ - if (fwnode_property_present(child, "retain-state-suspended")) - led.retain_state_suspended = 1; - -- ret = create_gpio_led(&led, led_dat, dev, NULL); -+ ret = create_gpio_led(&led, led_dat, dev, np, NULL); - if (ret < 0) { - fwnode_handle_put(child); - goto err; -@@ -256,9 +256,9 @@ static int gpio_led_probe(struct platfor - - priv->num_leds = pdata->num_leds; - for (i = 0; i < priv->num_leds; i++) { -- ret = create_gpio_led(&pdata->leds[i], -- &priv->leds[i], -- &pdev->dev, pdata->gpio_blink_set); -+ ret = create_gpio_led(&pdata->leds[i], &priv->leds[i], -+ &pdev->dev, NULL, -+ pdata->gpio_blink_set); - if (ret < 0) - return ret; - } diff --git a/target/linux/generic/pending-4.4/086-0001-thermal-of-thermal-Add-devm-version-of-thermal_zone_.patch b/target/linux/generic/pending-4.4/086-0001-thermal-of-thermal-Add-devm-version-of-thermal_zone_.patch deleted file mode 100644 index b551bac69d..0000000000 --- a/target/linux/generic/pending-4.4/086-0001-thermal-of-thermal-Add-devm-version-of-thermal_zone_.patch +++ /dev/null @@ -1,143 +0,0 @@ -From e498b4984db82b4ba3ceea7dba813222a31e9c2e Mon Sep 17 00:00:00 2001 -From: Laxman Dewangan <ldewangan@nvidia.com> -Date: Wed, 9 Mar 2016 18:40:06 +0530 -Subject: [PATCH] thermal: of-thermal: Add devm version of - thermal_zone_of_sensor_register - -Add resource managed version of thermal_zone_of_sensor_register() and -thermal_zone_of_sensor_unregister(). - -This helps in reducing the code size in error path, remove of -driver remove callbacks and making proper sequence for deallocations. - -Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> -Signed-off-by: Eduardo Valentin <edubezval@gmail.com> ---- - drivers/thermal/of-thermal.c | 81 ++++++++++++++++++++++++++++++++++++++++++++ - include/linux/thermal.h | 18 ++++++++++ - 2 files changed, 99 insertions(+) - ---- a/drivers/thermal/of-thermal.c -+++ b/drivers/thermal/of-thermal.c -@@ -559,6 +559,87 @@ void thermal_zone_of_sensor_unregister(s - } - EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister); - -+static void devm_thermal_zone_of_sensor_release(struct device *dev, void *res) -+{ -+ thermal_zone_of_sensor_unregister(dev, -+ *(struct thermal_zone_device **)res); -+} -+ -+static int devm_thermal_zone_of_sensor_match(struct device *dev, void *res, -+ void *data) -+{ -+ struct thermal_zone_device **r = res; -+ -+ if (WARN_ON(!r || !*r)) -+ return 0; -+ -+ return *r == data; -+} -+ -+/** -+ * devm_thermal_zone_of_sensor_register - Resource managed version of -+ * thermal_zone_of_sensor_register() -+ * @dev: a valid struct device pointer of a sensor device. Must contain -+ * a valid .of_node, for the sensor node. -+ * @sensor_id: a sensor identifier, in case the sensor IP has more -+ * than one sensors -+ * @data: a private pointer (owned by the caller) that will be passed -+ * back, when a temperature reading is needed. -+ * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp. -+ * -+ * Refer thermal_zone_of_sensor_register() for more details. -+ * -+ * Return: On success returns a valid struct thermal_zone_device, -+ * otherwise, it returns a corresponding ERR_PTR(). Caller must -+ * check the return value with help of IS_ERR() helper. -+ * Registered hermal_zone_device device will automatically be -+ * released when device is unbounded. -+ */ -+struct thermal_zone_device *devm_thermal_zone_of_sensor_register( -+ struct device *dev, int sensor_id, -+ void *data, const struct thermal_zone_of_device_ops *ops) -+{ -+ struct thermal_zone_device **ptr, *tzd; -+ -+ ptr = devres_alloc(devm_thermal_zone_of_sensor_release, sizeof(*ptr), -+ GFP_KERNEL); -+ if (!ptr) -+ return ERR_PTR(-ENOMEM); -+ -+ tzd = thermal_zone_of_sensor_register(dev, sensor_id, data, ops); -+ if (IS_ERR(tzd)) { -+ devres_free(ptr); -+ return tzd; -+ } -+ -+ *ptr = tzd; -+ devres_add(dev, ptr); -+ -+ return tzd; -+} -+EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_register); -+ -+/** -+ * devm_thermal_zone_of_sensor_unregister - Resource managed version of -+ * thermal_zone_of_sensor_unregister(). -+ * @dev: Device for which which resource was allocated. -+ * @tzd: a pointer to struct thermal_zone_device where the sensor is registered. -+ * -+ * This function removes the sensor callbacks and private data from the -+ * thermal zone device registered with devm_thermal_zone_of_sensor_register() -+ * API. It will also silent the zone by remove the .get_temp() and .get_trend() -+ * thermal zone device callbacks. -+ * Normally this function will not need to be called and the resource -+ * management code will ensure that the resource is freed. -+ */ -+void devm_thermal_zone_of_sensor_unregister(struct device *dev, -+ struct thermal_zone_device *tzd) -+{ -+ WARN_ON(devres_release(dev, devm_thermal_zone_of_sensor_release, -+ devm_thermal_zone_of_sensor_match, tzd)); -+} -+EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_unregister); -+ - /*** functions parsing device tree nodes ***/ - - /** ---- a/include/linux/thermal.h -+++ b/include/linux/thermal.h -@@ -364,6 +364,11 @@ thermal_zone_of_sensor_register(struct d - const struct thermal_zone_of_device_ops *ops); - void thermal_zone_of_sensor_unregister(struct device *dev, - struct thermal_zone_device *tz); -+struct thermal_zone_device *devm_thermal_zone_of_sensor_register( -+ struct device *dev, int id, void *data, -+ const struct thermal_zone_of_device_ops *ops); -+void devm_thermal_zone_of_sensor_unregister(struct device *dev, -+ struct thermal_zone_device *tz); - #else - static inline struct thermal_zone_device * - thermal_zone_of_sensor_register(struct device *dev, int id, void *data, -@@ -378,6 +383,19 @@ void thermal_zone_of_sensor_unregister(s - { - } - -+static inline struct thermal_zone_device *devm_thermal_zone_of_sensor_register( -+ struct device *dev, int id, void *data, -+ const struct thermal_zone_of_device_ops *ops) -+{ -+ return ERR_PTR(-ENODEV); -+} -+ -+static inline -+void devm_thermal_zone_of_sensor_unregister(struct device *dev, -+ struct thermal_zone_device *tz) -+{ -+} -+ - #endif - - #if IS_ENABLED(CONFIG_THERMAL) diff --git a/target/linux/generic/pending-4.4/086-0002-thermal-core-export-apis-to-get-slope-and-offset.patch b/target/linux/generic/pending-4.4/086-0002-thermal-core-export-apis-to-get-slope-and-offset.patch deleted file mode 100644 index 3fbe5f521a..0000000000 --- a/target/linux/generic/pending-4.4/086-0002-thermal-core-export-apis-to-get-slope-and-offset.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 4a7069a32c99a81950de035535b0a064dcceaeba Mon Sep 17 00:00:00 2001 -From: Rajendra Nayak <rnayak@codeaurora.org> -Date: Thu, 5 May 2016 14:21:42 +0530 -Subject: [PATCH] thermal: core: export apis to get slope and offset - -Add apis for platform thermal drivers to query for slope and offset -attributes, which might be needed for temperature calculations. - -Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> -Signed-off-by: Eduardo Valentin <edubezval@gmail.com> -Signed-off-by: Zhang Rui <rui.zhang@intel.com> ---- - Documentation/thermal/sysfs-api.txt | 12 ++++++++++++ - drivers/thermal/thermal_core.c | 30 ++++++++++++++++++++++++++++++ - include/linux/thermal.h | 8 ++++++++ - 3 files changed, 50 insertions(+) - ---- a/Documentation/thermal/sysfs-api.txt -+++ b/Documentation/thermal/sysfs-api.txt -@@ -72,6 +72,18 @@ temperature) and throttle appropriate de - It deletes the corresponding entry form /sys/class/thermal folder and - unbind all the thermal cooling devices it uses. - -+1.1.7 int thermal_zone_get_slope(struct thermal_zone_device *tz) -+ -+ This interface is used to read the slope attribute value -+ for the thermal zone device, which might be useful for platform -+ drivers for temperature calculations. -+ -+1.1.8 int thermal_zone_get_offset(struct thermal_zone_device *tz) -+ -+ This interface is used to read the offset attribute value -+ for the thermal zone device, which might be useful for platform -+ drivers for temperature calculations. -+ - 1.2 thermal cooling device interface - 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, - void *devdata, struct thermal_cooling_device_ops *) ---- a/drivers/thermal/thermal_core.c -+++ b/drivers/thermal/thermal_core.c -@@ -2061,6 +2061,36 @@ exit: - } - EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name); - -+/** -+ * thermal_zone_get_slope - return the slope attribute of the thermal zone -+ * @tz: thermal zone device with the slope attribute -+ * -+ * Return: If the thermal zone device has a slope attribute, return it, else -+ * return 1. -+ */ -+int thermal_zone_get_slope(struct thermal_zone_device *tz) -+{ -+ if (tz && tz->tzp) -+ return tz->tzp->slope; -+ return 1; -+} -+EXPORT_SYMBOL_GPL(thermal_zone_get_slope); -+ -+/** -+ * thermal_zone_get_offset - return the offset attribute of the thermal zone -+ * @tz: thermal zone device with the offset attribute -+ * -+ * Return: If the thermal zone device has a offset attribute, return it, else -+ * return 0. -+ */ -+int thermal_zone_get_offset(struct thermal_zone_device *tz) -+{ -+ if (tz && tz->tzp) -+ return tz->tzp->offset; -+ return 0; -+} -+EXPORT_SYMBOL_GPL(thermal_zone_get_offset); -+ - #ifdef CONFIG_NET - static const struct genl_multicast_group thermal_event_mcgrps[] = { - { .name = THERMAL_GENL_MCAST_GROUP_NAME, }, ---- a/include/linux/thermal.h -+++ b/include/linux/thermal.h -@@ -432,6 +432,8 @@ thermal_of_cooling_device_register(struc - void thermal_cooling_device_unregister(struct thermal_cooling_device *); - struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); - int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp); -+int thermal_zone_get_slope(struct thermal_zone_device *tz); -+int thermal_zone_get_offset(struct thermal_zone_device *tz); - - int get_tz_trend(struct thermal_zone_device *, int); - struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, -@@ -489,6 +491,12 @@ static inline struct thermal_zone_device - static inline int thermal_zone_get_temp( - struct thermal_zone_device *tz, int *temp) - { return -ENODEV; } -+static inline int thermal_zone_get_slope( -+ struct thermal_zone_device *tz) -+{ return -ENODEV; } -+static inline int thermal_zone_get_offset( -+ struct thermal_zone_device *tz) -+{ return -ENODEV; } - static inline int get_tz_trend(struct thermal_zone_device *tz, int trip) - { return -ENODEV; } - static inline struct thermal_instance * diff --git a/target/linux/generic/pending-4.4/086-0003-thermal-bcm2835-add-thermal-driver-for-bcm2835-SoC.patch b/target/linux/generic/pending-4.4/086-0003-thermal-bcm2835-add-thermal-driver-for-bcm2835-SoC.patch deleted file mode 100644 index d606804de6..0000000000 --- a/target/linux/generic/pending-4.4/086-0003-thermal-bcm2835-add-thermal-driver-for-bcm2835-SoC.patch +++ /dev/null @@ -1,365 +0,0 @@ -From bcb7dd9ef206f7d646ed8dac6fe7772083714253 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren <stefan.wahren@i2se.com> -Date: Fri, 31 Mar 2017 20:03:06 +0000 -Subject: [PATCH] thermal: bcm2835: add thermal driver for bcm2835 SoC -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add basic thermal driver for bcm2835 SoC. - -This driver currently make sure that tsense HW block is set up -correctly. - -Tested-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: Martin Sperl <kernel@martin.sperl.org> -Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> -Acked-by: Eric Anholt <eric@anholt.net> -Acked-by: Eduardo Valentin <edubezval@gmail.com> -Signed-off-by: Eduardo Valentin <edubezval@gmail.com> ---- - drivers/thermal/Kconfig | 8 + - drivers/thermal/Makefile | 1 + - drivers/thermal/bcm2835_thermal.c | 314 ++++++++++++++++++++++++++++++++++++++ - 3 files changed, 323 insertions(+) - create mode 100644 drivers/thermal/bcm2835_thermal.c - ---- a/drivers/thermal/Kconfig -+++ b/drivers/thermal/Kconfig -@@ -391,4 +391,12 @@ config QCOM_SPMI_TEMP_ALARM - real time die temperature if an ADC is present or an estimate of the - temperature based upon the over temperature stage value. - -+config BCM2835_THERMAL -+ tristate "Thermal sensors on bcm2835 SoC" -+ depends on ARCH_BCM2835 || COMPILE_TEST -+ depends on HAS_IOMEM -+ depends on THERMAL_OF -+ help -+ Support for thermal sensors on Broadcom bcm2835 SoCs. -+ - endif ---- a/drivers/thermal/Makefile -+++ b/drivers/thermal/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_INTEL_PCH_THERMAL) += intel - obj-$(CONFIG_ST_THERMAL) += st/ - obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o - obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o -+obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o ---- /dev/null -+++ b/drivers/thermal/bcm2835_thermal.c -@@ -0,0 +1,314 @@ -+/* -+ * Driver for Broadcom BCM2835 SoC temperature sensor -+ * -+ * Copyright (C) 2016 Martin Sperl -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/debugfs.h> -+#include <linux/device.h> -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/of_address.h> -+#include <linux/of_device.h> -+#include <linux/platform_device.h> -+#include <linux/thermal.h> -+ -+#define BCM2835_TS_TSENSCTL 0x00 -+#define BCM2835_TS_TSENSSTAT 0x04 -+ -+#define BCM2835_TS_TSENSCTL_PRWDW BIT(0) -+#define BCM2835_TS_TSENSCTL_RSTB BIT(1) -+ -+/* -+ * bandgap reference voltage in 6 mV increments -+ * 000b = 1178 mV, 001b = 1184 mV, ... 111b = 1220 mV -+ */ -+#define BCM2835_TS_TSENSCTL_CTRL_BITS 3 -+#define BCM2835_TS_TSENSCTL_CTRL_SHIFT 2 -+#define BCM2835_TS_TSENSCTL_CTRL_MASK \ -+ GENMASK(BCM2835_TS_TSENSCTL_CTRL_BITS + \ -+ BCM2835_TS_TSENSCTL_CTRL_SHIFT - 1, \ -+ BCM2835_TS_TSENSCTL_CTRL_SHIFT) -+#define BCM2835_TS_TSENSCTL_CTRL_DEFAULT 1 -+#define BCM2835_TS_TSENSCTL_EN_INT BIT(5) -+#define BCM2835_TS_TSENSCTL_DIRECT BIT(6) -+#define BCM2835_TS_TSENSCTL_CLR_INT BIT(7) -+#define BCM2835_TS_TSENSCTL_THOLD_SHIFT 8 -+#define BCM2835_TS_TSENSCTL_THOLD_BITS 10 -+#define BCM2835_TS_TSENSCTL_THOLD_MASK \ -+ GENMASK(BCM2835_TS_TSENSCTL_THOLD_BITS + \ -+ BCM2835_TS_TSENSCTL_THOLD_SHIFT - 1, \ -+ BCM2835_TS_TSENSCTL_THOLD_SHIFT) -+/* -+ * time how long the block to be asserted in reset -+ * which based on a clock counter (TSENS clock assumed) -+ */ -+#define BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT 18 -+#define BCM2835_TS_TSENSCTL_RSTDELAY_BITS 8 -+#define BCM2835_TS_TSENSCTL_REGULEN BIT(26) -+ -+#define BCM2835_TS_TSENSSTAT_DATA_BITS 10 -+#define BCM2835_TS_TSENSSTAT_DATA_SHIFT 0 -+#define BCM2835_TS_TSENSSTAT_DATA_MASK \ -+ GENMASK(BCM2835_TS_TSENSSTAT_DATA_BITS + \ -+ BCM2835_TS_TSENSSTAT_DATA_SHIFT - 1, \ -+ BCM2835_TS_TSENSSTAT_DATA_SHIFT) -+#define BCM2835_TS_TSENSSTAT_VALID BIT(10) -+#define BCM2835_TS_TSENSSTAT_INTERRUPT BIT(11) -+ -+struct bcm2835_thermal_data { -+ struct thermal_zone_device *tz; -+ void __iomem *regs; -+ struct clk *clk; -+ struct dentry *debugfsdir; -+}; -+ -+static int bcm2835_thermal_adc2temp(u32 adc, int offset, int slope) -+{ -+ return offset + slope * adc; -+} -+ -+static int bcm2835_thermal_temp2adc(int temp, int offset, int slope) -+{ -+ temp -= offset; -+ temp /= slope; -+ -+ if (temp < 0) -+ temp = 0; -+ if (temp >= BIT(BCM2835_TS_TSENSSTAT_DATA_BITS)) -+ temp = BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1; -+ -+ return temp; -+} -+ -+static int bcm2835_thermal_get_temp(void *d, int *temp) -+{ -+ struct bcm2835_thermal_data *data = d; -+ u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT); -+ -+ if (!(val & BCM2835_TS_TSENSSTAT_VALID)) -+ return -EIO; -+ -+ val &= BCM2835_TS_TSENSSTAT_DATA_MASK; -+ -+ *temp = bcm2835_thermal_adc2temp( -+ val, -+ thermal_zone_get_offset(data->tz), -+ thermal_zone_get_slope(data->tz)); -+ -+ return 0; -+} -+ -+static const struct debugfs_reg32 bcm2835_thermal_regs[] = { -+ { -+ .name = "ctl", -+ .offset = 0 -+ }, -+ { -+ .name = "stat", -+ .offset = 4 -+ } -+}; -+ -+static void bcm2835_thermal_debugfs(struct platform_device *pdev) -+{ -+ struct thermal_zone_device *tz = platform_get_drvdata(pdev); -+ struct bcm2835_thermal_data *data = tz->devdata; -+ struct debugfs_regset32 *regset; -+ -+ data->debugfsdir = debugfs_create_dir("bcm2835_thermal", NULL); -+ if (!data->debugfsdir) -+ return; -+ -+ regset = devm_kzalloc(&pdev->dev, sizeof(*regset), GFP_KERNEL); -+ if (!regset) -+ return; -+ -+ regset->regs = bcm2835_thermal_regs; -+ regset->nregs = ARRAY_SIZE(bcm2835_thermal_regs); -+ regset->base = data->regs; -+ -+ debugfs_create_regset32("regset", 0444, data->debugfsdir, regset); -+} -+ -+static struct thermal_zone_of_device_ops bcm2835_thermal_ops = { -+ .get_temp = bcm2835_thermal_get_temp, -+}; -+ -+/* -+ * Note: as per Raspberry Foundation FAQ -+ * (https://www.raspberrypi.org/help/faqs/#performanceOperatingTemperature) -+ * the recommended temperature range for the SoC -40C to +85C -+ * so the trip limit is set to 80C. -+ * this applies to all the BCM283X SoC -+ */ -+ -+static const struct of_device_id bcm2835_thermal_of_match_table[] = { -+ { -+ .compatible = "brcm,bcm2835-thermal", -+ }, -+ { -+ .compatible = "brcm,bcm2836-thermal", -+ }, -+ { -+ .compatible = "brcm,bcm2837-thermal", -+ }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table); -+ -+static int bcm2835_thermal_probe(struct platform_device *pdev) -+{ -+ const struct of_device_id *match; -+ struct thermal_zone_device *tz; -+ struct bcm2835_thermal_data *data; -+ struct resource *res; -+ int err = 0; -+ u32 val; -+ unsigned long rate; -+ -+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ match = of_match_device(bcm2835_thermal_of_match_table, -+ &pdev->dev); -+ if (!match) -+ return -EINVAL; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ data->regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(data->regs)) { -+ err = PTR_ERR(data->regs); -+ dev_err(&pdev->dev, "Could not get registers: %d\n", err); -+ return err; -+ } -+ -+ data->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(data->clk)) { -+ err = PTR_ERR(data->clk); -+ if (err != -EPROBE_DEFER) -+ dev_err(&pdev->dev, "Could not get clk: %d\n", err); -+ return err; -+ } -+ -+ err = clk_prepare_enable(data->clk); -+ if (err) -+ return err; -+ -+ rate = clk_get_rate(data->clk); -+ if ((rate < 1920000) || (rate > 5000000)) -+ dev_warn(&pdev->dev, -+ "Clock %pCn running at %pCr Hz is outside of the recommended range: 1.92 to 5MHz\n", -+ data->clk, data->clk); -+ -+ /* register of thermal sensor and get info from DT */ -+ tz = thermal_zone_of_sensor_register(&pdev->dev, 0, data, -+ &bcm2835_thermal_ops); -+ if (IS_ERR(tz)) { -+ err = PTR_ERR(tz); -+ dev_err(&pdev->dev, -+ "Failed to register the thermal device: %d\n", -+ err); -+ goto err_clk; -+ } -+ -+ /* -+ * right now the FW does set up the HW-block, so we are not -+ * touching the configuration registers. -+ * But if the HW is not enabled, then set it up -+ * using "sane" values used by the firmware right now. -+ */ -+ val = readl(data->regs + BCM2835_TS_TSENSCTL); -+ if (!(val & BCM2835_TS_TSENSCTL_RSTB)) { -+ int trip_temp, offset, slope; -+ -+ slope = thermal_zone_get_slope(tz); -+ offset = thermal_zone_get_offset(tz); -+ /* -+ * For now we deal only with critical, otherwise -+ * would need to iterate -+ */ -+ err = tz->ops->get_trip_temp(tz, 0, &trip_temp); -+ if (err < 0) { -+ err = PTR_ERR(tz); -+ dev_err(&pdev->dev, -+ "Not able to read trip_temp: %d\n", -+ err); -+ goto err_tz; -+ } -+ -+ /* set bandgap reference voltage and enable voltage regulator */ -+ val = (BCM2835_TS_TSENSCTL_CTRL_DEFAULT << -+ BCM2835_TS_TSENSCTL_CTRL_SHIFT) | -+ BCM2835_TS_TSENSCTL_REGULEN; -+ -+ /* use the recommended reset duration */ -+ val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT); -+ -+ /* trip_adc value from info */ -+ val |= bcm2835_thermal_temp2adc(trip_temp, -+ offset, -+ slope) -+ << BCM2835_TS_TSENSCTL_THOLD_SHIFT; -+ -+ /* write the value back to the register as 2 steps */ -+ writel(val, data->regs + BCM2835_TS_TSENSCTL); -+ val |= BCM2835_TS_TSENSCTL_RSTB; -+ writel(val, data->regs + BCM2835_TS_TSENSCTL); -+ } -+ -+ data->tz = tz; -+ -+ platform_set_drvdata(pdev, tz); -+ -+ bcm2835_thermal_debugfs(pdev); -+ -+ return 0; -+err_tz: -+ thermal_zone_of_sensor_unregister(&pdev->dev, tz); -+err_clk: -+ clk_disable_unprepare(data->clk); -+ -+ return err; -+} -+ -+static int bcm2835_thermal_remove(struct platform_device *pdev) -+{ -+ struct thermal_zone_device *tz = platform_get_drvdata(pdev); -+ struct bcm2835_thermal_data *data = tz->devdata; -+ -+ debugfs_remove_recursive(data->debugfsdir); -+ thermal_zone_of_sensor_unregister(&pdev->dev, tz); -+ clk_disable_unprepare(data->clk); -+ -+ return 0; -+} -+ -+static struct platform_driver bcm2835_thermal_driver = { -+ .probe = bcm2835_thermal_probe, -+ .remove = bcm2835_thermal_remove, -+ .driver = { -+ .name = "bcm2835_thermal", -+ .of_match_table = bcm2835_thermal_of_match_table, -+ }, -+}; -+module_platform_driver(bcm2835_thermal_driver); -+ -+MODULE_AUTHOR("Martin Sperl"); -+MODULE_DESCRIPTION("Thermal driver for bcm2835 chip"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/pending-4.4/086-0004-thermal-broadcom-add-Northstar-thermal-driver.patch b/target/linux/generic/pending-4.4/086-0004-thermal-broadcom-add-Northstar-thermal-driver.patch deleted file mode 100644 index 182109632f..0000000000 --- a/target/linux/generic/pending-4.4/086-0004-thermal-broadcom-add-Northstar-thermal-driver.patch +++ /dev/null @@ -1,173 +0,0 @@ -From a94cb7eeecc4104a6874339f90c5d0647359c102 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 3 Apr 2017 17:48:29 +0200 -Subject: [PATCH] thermal: broadcom: add Northstar thermal driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Northstar is a SoC family commonly used in home routers. This commit -adds a driver for checking CPU temperature. As Northstar Plus seems to -also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -Signed-off-by: Jon Mason <jon.mason@broadcom.com> -Signed-off-by: Eduardo Valentin <edubezval@gmail.com> ---- - drivers/thermal/Kconfig | 5 ++ - drivers/thermal/Makefile | 1 + - drivers/thermal/broadcom/Kconfig | 8 +++ - drivers/thermal/broadcom/Makefile | 1 + - drivers/thermal/broadcom/ns-thermal.c | 105 ++++++++++++++++++++++++++++++++++ - 5 files changed, 120 insertions(+) - create mode 100644 drivers/thermal/broadcom/Kconfig - create mode 100644 drivers/thermal/broadcom/Makefile - create mode 100644 drivers/thermal/broadcom/ns-thermal.c - ---- a/drivers/thermal/Kconfig -+++ b/drivers/thermal/Kconfig -@@ -365,6 +365,11 @@ config INTEL_PCH_THERMAL - Thermal reporting device will provide temperature reading, - programmable trip points and other information. - -+menu "Broadcom thermal drivers" -+depends on ARCH_BCM || COMPILE_TEST -+source "drivers/thermal/broadcom/Kconfig" -+endmenu -+ - menu "Texas Instruments thermal drivers" - depends on ARCH_HAS_BANDGAP || COMPILE_TEST - source "drivers/thermal/ti-soc-thermal/Kconfig" ---- a/drivers/thermal/Makefile -+++ b/drivers/thermal/Makefile -@@ -26,6 +26,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += c - thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o - - # platform thermal drivers -+obj-y += broadcom/ - obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o - obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o - obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o ---- /dev/null -+++ b/drivers/thermal/broadcom/Kconfig -@@ -0,0 +1,8 @@ -+config BCM_NS_THERMAL -+ tristate "Northstar thermal driver" -+ depends on ARCH_BCM_IPROC || COMPILE_TEST -+ help -+ Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, -+ BCM4709 and BCM47094. It contains DMU (Device Management Unit) block -+ with a thermal sensor that allows checking CPU temperature. This -+ driver provides support for it. ---- /dev/null -+++ b/drivers/thermal/broadcom/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o ---- /dev/null -+++ b/drivers/thermal/broadcom/ns-thermal.c -@@ -0,0 +1,105 @@ -+/* -+ * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/of_address.h> -+#include <linux/platform_device.h> -+#include <linux/thermal.h> -+ -+#define PVTMON_CONTROL0 0x00 -+#define PVTMON_CONTROL0_SEL_MASK 0x0000000e -+#define PVTMON_CONTROL0_SEL_TEMP_MONITOR 0x00000000 -+#define PVTMON_CONTROL0_SEL_TEST_MODE 0x0000000e -+#define PVTMON_STATUS 0x08 -+ -+struct ns_thermal { -+ struct thermal_zone_device *tz; -+ void __iomem *pvtmon; -+}; -+ -+static int ns_thermal_get_temp(void *data, int *temp) -+{ -+ struct ns_thermal *ns_thermal = data; -+ int offset = thermal_zone_get_offset(ns_thermal->tz); -+ int slope = thermal_zone_get_slope(ns_thermal->tz); -+ u32 val; -+ -+ val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0); -+ if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) { -+ /* Clear current mode selection */ -+ val &= ~PVTMON_CONTROL0_SEL_MASK; -+ -+ /* Set temp monitor mode (it's the default actually) */ -+ val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR; -+ -+ writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0); -+ } -+ -+ val = readl(ns_thermal->pvtmon + PVTMON_STATUS); -+ *temp = slope * val + offset; -+ -+ return 0; -+} -+ -+static const struct thermal_zone_of_device_ops ns_thermal_ops = { -+ .get_temp = ns_thermal_get_temp, -+}; -+ -+static int ns_thermal_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct ns_thermal *ns_thermal; -+ -+ ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL); -+ if (!ns_thermal) -+ return -ENOMEM; -+ -+ ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0); -+ if (WARN_ON(!ns_thermal->pvtmon)) -+ return -ENOENT; -+ -+ ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0, -+ ns_thermal, -+ &ns_thermal_ops); -+ if (IS_ERR(ns_thermal->tz)) { -+ iounmap(ns_thermal->pvtmon); -+ return PTR_ERR(ns_thermal->tz); -+ } -+ -+ platform_set_drvdata(pdev, ns_thermal); -+ -+ return 0; -+} -+ -+static int ns_thermal_remove(struct platform_device *pdev) -+{ -+ struct ns_thermal *ns_thermal = platform_get_drvdata(pdev); -+ -+ iounmap(ns_thermal->pvtmon); -+ -+ return 0; -+} -+ -+static const struct of_device_id ns_thermal_of_match[] = { -+ { .compatible = "brcm,ns-thermal", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ns_thermal_of_match); -+ -+static struct platform_driver ns_thermal_driver = { -+ .probe = ns_thermal_probe, -+ .remove = ns_thermal_remove, -+ .driver = { -+ .name = "ns-thermal", -+ .of_match_table = ns_thermal_of_match, -+ }, -+}; -+module_platform_driver(ns_thermal_driver); -+ -+MODULE_DESCRIPTION("Northstar thermal driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/pending-4.4/086-0005-thermal-broadcom-fix-compilation-of-Northstar-driver.patch b/target/linux/generic/pending-4.4/086-0005-thermal-broadcom-fix-compilation-of-Northstar-driver.patch deleted file mode 100644 index 62bfffefbe..0000000000 --- a/target/linux/generic/pending-4.4/086-0005-thermal-broadcom-fix-compilation-of-Northstar-driver.patch +++ /dev/null @@ -1,19 +0,0 @@ -From d44264c8735f79da3253520024841311c555ca31 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 14 Apr 2017 22:25:12 +0200 -Subject: [PATCH] thermal: broadcom: fix compilation of Northstar driver - ---- - drivers/thermal/broadcom/ns-thermal.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/thermal/broadcom/ns-thermal.c -+++ b/drivers/thermal/broadcom/ns-thermal.c -@@ -6,6 +6,7 @@ - * published by the Free Software Foundation. - */ - -+#include <asm/io.h> - #include <linux/module.h> - #include <linux/of_address.h> - #include <linux/platform_device.h> diff --git a/target/linux/generic/pending-4.4/087-regmap-make-LZO-cache-optional.patch b/target/linux/generic/pending-4.4/087-regmap-make-LZO-cache-optional.patch deleted file mode 100644 index c26994ee35..0000000000 --- a/target/linux/generic/pending-4.4/087-regmap-make-LZO-cache-optional.patch +++ /dev/null @@ -1,69 +0,0 @@ -From de88e9b0354c2e3ff8eae3f97afe43a34f5ed239 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Sat, 13 May 2017 13:03:21 +0200 -Subject: [PATCH] regmap: make LZO cache optional - -Commit 2cbbb579bcbe3 ("regmap: Add the LZO cache support") added support -for LZO compression in regcache, but there were never any users added -afterwards. Since LZO support itself has its own size, it currently is -rather a deoptimization. - -So make it optional by introducing a symbol that can be selected by -drivers wanting to make use of it. - -Saves e.g. ~46 kB on MIPS (size of LZO support + regcache LZO code). - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- -I tried using google to find any users (even out-of-tree ones), but at -best I found a single driver submission that was switched to RBTREE in -subsequent resubmissions (MFD_SMSC). - -One could maybe also just drop the code because of no users for 5 years, -but that would be up to the maintainer(s) to decide. - - drivers/base/regmap/Kconfig | 5 ++++- - drivers/base/regmap/Makefile | 3 ++- - drivers/base/regmap/regcache.c | 2 ++ - 3 files changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/base/regmap/Kconfig -+++ b/drivers/base/regmap/Kconfig -@@ -4,9 +4,12 @@ - - config REGMAP - default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ) -+ select IRQ_DOMAIN if REGMAP_IRQ -+ bool -+ -+config REGCACHE_COMPRESSED - select LZO_COMPRESS - select LZO_DECOMPRESS -- select IRQ_DOMAIN if REGMAP_IRQ - bool - - config REGMAP_AC97 ---- a/drivers/base/regmap/Makefile -+++ b/drivers/base/regmap/Makefile -@@ -2,7 +2,8 @@ - CFLAGS_regmap.o := -I$(src) - - obj-$(CONFIG_REGMAP) += regmap.o regcache.o --obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o -+obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o -+obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o - obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o - obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o - obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o ---- a/drivers/base/regmap/regcache.c -+++ b/drivers/base/regmap/regcache.c -@@ -21,7 +21,9 @@ - - static const struct regcache_ops *cache_types[] = { - ®cache_rbtree_ops, -+#if IS_ENABLED(CONFIG_REGCACHE_COMPRESSED) - ®cache_lzo_ops, -+#endif - ®cache_flat_ops, - }; - diff --git a/target/linux/generic/pending-4.4/090-MIPS-c-r4k-Use-IPI-calls-for-CM-indexed-cache-ops.patch b/target/linux/generic/pending-4.4/090-MIPS-c-r4k-Use-IPI-calls-for-CM-indexed-cache-ops.patch deleted file mode 100644 index 0c1c0a4509..0000000000 --- a/target/linux/generic/pending-4.4/090-MIPS-c-r4k-Use-IPI-calls-for-CM-indexed-cache-ops.patch +++ /dev/null @@ -1,317 +0,0 @@ -From: James Hogan <james.hogan@imgtec.com> -Date: Mon, 25 Jan 2016 21:30:00 +0000 -Subject: [PATCH] MIPS: c-r4k: Use IPI calls for CM indexed cache ops - -The Coherence Manager (CM) can propagate address-based ("hit") cache -operations to other cores in the coherent system, alleviating software -of the need to use IPI calls, however indexed cache operations are not -propagated since doing so makes no sense for separate caches. - -r4k_on_each_cpu() previously had a special case for CONFIG_MIPS_MT_SMP, -intended to avoid the IPIs when the only other CPUs in the system were -other VPEs in the same core, and hence sharing the same caches. This was -changed by commit cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT -cores") to apparently handle multi-core multi-VPE systems, but it -focussed mainly on hit cache ops, so the IPI calls were still disabled -entirely for CM systems. - -This doesn't normally cause problems, but tests can be written to hit -these corner cases by using multiple threads, or changing task -affinities to force the process to migrate cores. For example the -failure of mprotect RW->RX to globally sync icaches (via -flush_cache_range) can be detected by modifying and mprotecting a code -page on one core, and migrating to a different core to execute from it. - -Most of the functions called by r4k_on_each_cpu() perform cache -operations exclusively with a single addressing-type (virtual address vs -indexed), so add a type argument and modify the callers to pass in -R4K_USER (user virtual addressing), R4K_KERN (global kernel virtual -addressing) or R4K_INDEX (index into cache). - -local_r4k_flush_icache_range() is split up, to allow it to be called -from the rest of the kernel, or from r4k_flush_icache_range() where it -will choose either indexed or hit cache operations based on the size of -the range and the cache sizes. - -local_r4k_flush_kernel_vmap_range() is split into two functions, each of -which uses cache operations with a single addressing-type, with -r4k_flush_kernel_vmap_range() making the decision whether to use indexed -cache ops or not. - -Signed-off-by: James Hogan <james.hogan@imgtec.com> -Cc: Ralf Baechle <ralf@linux-mips.org> -Cc: Paul Burton <paul.burton@imgtec.com> -Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> -Cc: linux-mips@linux-mips.org ---- - ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -40,6 +40,50 @@ - #include <asm/mips-cm.h> - - /* -+ * Bits describing what cache ops an IPI callback function may perform. -+ * -+ * R4K_USER - Virtual user address based cache operations. -+ * Ineffective on other CPUs. -+ * R4K_KERN - Virtual kernel address based cache operations (including kmap). -+ * Effective on other CPUs. -+ * R4K_INDEX - Index based cache operations. -+ * Effective on other CPUs. -+ */ -+ -+#define R4K_USER BIT(0) -+#define R4K_KERN BIT(1) -+#define R4K_INDEX BIT(2) -+ -+#ifdef CONFIG_SMP -+/* The Coherence manager propagates address-based cache ops to other cores */ -+#define r4k_hit_globalized mips_cm_present() -+#define r4k_index_globalized 0 -+#else -+/* If there's only 1 CPU, then all cache ops are globalized to that 1 CPU */ -+#define r4k_hit_globalized 1 -+#define r4k_index_globalized 1 -+#endif -+ -+/** -+ * r4k_op_needs_ipi() - Decide if a cache op needs to be done on every core. -+ * @type: Type of cache operations (R4K_USER, R4K_KERN or R4K_INDEX). -+ * -+ * Returns: 1 if the cache operation @type should be done on every core in -+ * the system. -+ * 0 if the cache operation @type is globalized and only needs to -+ * be performed on a simple CPU. -+ */ -+static inline bool r4k_op_needs_ipi(unsigned int type) -+{ -+ /* -+ * If hardware doesn't globalize the required cache ops we must use IPIs -+ * to do so. -+ */ -+ return (type & R4K_KERN && !r4k_hit_globalized) || -+ (type & R4K_INDEX && !r4k_index_globalized); -+} -+ -+/* - * Special Variant of smp_call_function for use by cache functions: - * - * o No return value -@@ -48,19 +92,11 @@ - * primary cache. - * o doesn't disable interrupts on the local CPU - */ --static inline void r4k_on_each_cpu(void (*func) (void *info), void *info) -+static inline void r4k_on_each_cpu(unsigned int type, -+ void (*func) (void *info), void *info) - { - preempt_disable(); -- -- /* -- * The Coherent Manager propagates address-based cache ops to other -- * cores but not index-based ops. However, r4k_on_each_cpu is used -- * in both cases so there is no easy way to tell what kind of op is -- * executed to the other cores. The best we can probably do is -- * to restrict that call when a CM is not present because both -- * CM-based SMP protocols (CMP & CPS) restrict index-based cache ops. -- */ -- if (!mips_cm_present()) -+ if (r4k_op_needs_ipi(type)) - smp_call_function_many(&cpu_foreign_map, func, info, 1); - func(info); - preempt_enable(); -@@ -456,7 +492,7 @@ static inline void local_r4k___flush_cac - - static void r4k___flush_cache_all(void) - { -- r4k_on_each_cpu(local_r4k___flush_cache_all, NULL); -+ r4k_on_each_cpu(R4K_INDEX, local_r4k___flush_cache_all, NULL); - } - - static inline int has_valid_asid(const struct mm_struct *mm) -@@ -503,7 +539,7 @@ static void r4k_flush_cache_range(struct - int exec = vma->vm_flags & VM_EXEC; - - if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) -- r4k_on_each_cpu(local_r4k_flush_cache_range, vma); -+ r4k_on_each_cpu(R4K_INDEX, local_r4k_flush_cache_range, vma); - } - - static inline void local_r4k_flush_cache_mm(void * args) -@@ -535,7 +571,7 @@ static void r4k_flush_cache_mm(struct mm - if (!cpu_has_dc_aliases) - return; - -- r4k_on_each_cpu(local_r4k_flush_cache_mm, mm); -+ r4k_on_each_cpu(R4K_INDEX, local_r4k_flush_cache_mm, mm); - } - - struct flush_cache_page_args { -@@ -629,7 +665,7 @@ static void r4k_flush_cache_page(struct - args.addr = addr; - args.pfn = pfn; - -- r4k_on_each_cpu(local_r4k_flush_cache_page, &args); -+ r4k_on_each_cpu(R4K_KERN, local_r4k_flush_cache_page, &args); - } - - static inline void local_r4k_flush_data_cache_page(void * addr) -@@ -642,18 +678,23 @@ static void r4k_flush_data_cache_page(un - if (in_atomic()) - local_r4k_flush_data_cache_page((void *)addr); - else -- r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr); -+ r4k_on_each_cpu(R4K_KERN, local_r4k_flush_data_cache_page, -+ (void *) addr); - } - - struct flush_icache_range_args { - unsigned long start; - unsigned long end; -+ unsigned int type; - }; - --static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end) -+static inline void __local_r4k_flush_icache_range(unsigned long start, -+ unsigned long end, -+ unsigned int type) - { - if (!cpu_has_ic_fills_f_dc) { -- if (end - start >= dcache_size) { -+ if (type == R4K_INDEX || -+ (type & R4K_INDEX && end - start >= dcache_size)) { - r4k_blast_dcache(); - } else { - R4600_HIT_CACHEOP_WAR_IMPL; -@@ -661,7 +702,8 @@ static inline void local_r4k_flush_icach - } - } - -- if (end - start > icache_size) -+ if (type == R4K_INDEX || -+ (type & R4K_INDEX && end - start > icache_size)) - r4k_blast_icache(); - else { - switch (boot_cpu_type()) { -@@ -687,23 +729,59 @@ static inline void local_r4k_flush_icach - #endif - } - -+static inline void local_r4k_flush_icache_range(unsigned long start, -+ unsigned long end) -+{ -+ __local_r4k_flush_icache_range(start, end, R4K_KERN | R4K_INDEX); -+} -+ - static inline void local_r4k_flush_icache_range_ipi(void *args) - { - struct flush_icache_range_args *fir_args = args; - unsigned long start = fir_args->start; - unsigned long end = fir_args->end; -+ unsigned int type = fir_args->type; - -- local_r4k_flush_icache_range(start, end); -+ __local_r4k_flush_icache_range(start, end, type); - } - - static void r4k_flush_icache_range(unsigned long start, unsigned long end) - { - struct flush_icache_range_args args; -+ unsigned long size, cache_size; - - args.start = start; - args.end = end; -+ args.type = R4K_KERN | R4K_INDEX; - -- r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args); -+ if (in_atomic()) { -+ /* -+ * We can't do blocking IPI calls from atomic context, so fall -+ * back to pure address-based cache ops if they globalize. -+ */ -+ if (!r4k_index_globalized && r4k_hit_globalized) { -+ args.type &= ~R4K_INDEX; -+ } else { -+ /* Just do it locally instead. */ -+ local_r4k_flush_icache_range(start, end); -+ instruction_hazard(); -+ return; -+ } -+ } else if (!r4k_index_globalized && r4k_hit_globalized) { -+ /* -+ * If address-based cache ops are globalized, then we may be -+ * able to avoid the IPI for small flushes. -+ */ -+ size = start - end; -+ cache_size = icache_size; -+ if (!cpu_has_ic_fills_f_dc) { -+ size *= 2; -+ cache_size += dcache_size; -+ } -+ if (size <= cache_size) -+ args.type &= ~R4K_INDEX; -+ } -+ r4k_on_each_cpu(args.type, local_r4k_flush_icache_range_ipi, &args); - instruction_hazard(); - } - -@@ -823,7 +901,12 @@ static void local_r4k_flush_cache_sigtra - - static void r4k_flush_cache_sigtramp(unsigned long addr) - { -- r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr); -+ /* -+ * FIXME this is a bit broken when !r4k_hit_globalized, since the user -+ * code probably won't be mapped on other CPUs, so if the process is -+ * migrated, it could end up hitting stale icache lines. -+ */ -+ r4k_on_each_cpu(R4K_USER, local_r4k_flush_cache_sigtramp, (void *)addr); - } - - static void r4k_flush_icache_all(void) -@@ -837,6 +920,15 @@ struct flush_kernel_vmap_range_args { - int size; - }; - -+static inline void local_r4k_flush_kernel_vmap_range_index(void *args) -+{ -+ /* -+ * Aliases only affect the primary caches so don't bother with -+ * S-caches or T-caches. -+ */ -+ r4k_blast_dcache(); -+} -+ - static inline void local_r4k_flush_kernel_vmap_range(void *args) - { - struct flush_kernel_vmap_range_args *vmra = args; -@@ -847,12 +939,8 @@ static inline void local_r4k_flush_kerne - * Aliases only affect the primary caches so don't bother with - * S-caches or T-caches. - */ -- if (cpu_has_safe_index_cacheops && size >= dcache_size) -- r4k_blast_dcache(); -- else { -- R4600_HIT_CACHEOP_WAR_IMPL; -- blast_dcache_range(vaddr, vaddr + size); -- } -+ R4600_HIT_CACHEOP_WAR_IMPL; -+ blast_dcache_range(vaddr, vaddr + size); - } - - static void r4k_flush_kernel_vmap_range(unsigned long vaddr, int size) -@@ -862,7 +950,12 @@ static void r4k_flush_kernel_vmap_range( - args.vaddr = (unsigned long) vaddr; - args.size = size; - -- r4k_on_each_cpu(local_r4k_flush_kernel_vmap_range, &args); -+ if (cpu_has_safe_index_cacheops && size >= dcache_size) -+ r4k_on_each_cpu(R4K_INDEX, -+ local_r4k_flush_kernel_vmap_range_index, NULL); -+ else -+ r4k_on_each_cpu(R4K_KERN, local_r4k_flush_kernel_vmap_range, -+ &args); - } - - static inline void rm7k_erratum31(void) diff --git a/target/linux/generic/pending-4.4/091-MIPS-c-r4k-Exclude-sibling-CPUs-in-SMP-calls.patch b/target/linux/generic/pending-4.4/091-MIPS-c-r4k-Exclude-sibling-CPUs-in-SMP-calls.patch deleted file mode 100644 index 8d5030c84b..0000000000 --- a/target/linux/generic/pending-4.4/091-MIPS-c-r4k-Exclude-sibling-CPUs-in-SMP-calls.patch +++ /dev/null @@ -1,37 +0,0 @@ -From: James Hogan <james.hogan@imgtec.com> -Date: Thu, 3 Mar 2016 21:30:42 +0000 -Subject: [PATCH] MIPS: c-r4k: Exclude sibling CPUs in SMP calls - -When performing SMP calls to foreign cores, exclude sibling CPUs from -the provided map, as we already handle the local core on the current -CPU. This prevents an IPI call from for example core 0, VPE 1 to VPE 0 -on the same core. - -Signed-off-by: James Hogan <james.hogan@imgtec.com> -Cc: Ralf Baechle <ralf@linux-mips.org> -Cc: Paul Burton <paul.burton@imgtec.com> -Cc: linux-mips@linux-mips.org ---- - ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -96,8 +96,17 @@ static inline void r4k_on_each_cpu(unsig - void (*func) (void *info), void *info) - { - preempt_disable(); -- if (r4k_op_needs_ipi(type)) -- smp_call_function_many(&cpu_foreign_map, func, info, 1); -+ /* cpu_foreign_map and cpu_sibling_map[] undeclared when !CONFIG_SMP */ -+#ifdef CONFIG_SMP -+ if (r4k_op_needs_ipi(type)) { -+ struct cpumask mask; -+ -+ /* exclude sibling CPUs */ -+ cpumask_andnot(&mask, &cpu_foreign_map, -+ &cpu_sibling_map[smp_processor_id()]); -+ smp_call_function_many(&mask, func, info, 1); -+ } -+#endif - func(info); - preempt_enable(); - } diff --git a/target/linux/generic/pending-4.4/092-MIPS-ZBOOT-copy-appended-dtb-to-the-end-of-the-kerne.patch b/target/linux/generic/pending-4.4/092-MIPS-ZBOOT-copy-appended-dtb-to-the-end-of-the-kerne.patch deleted file mode 100644 index 78188dd298..0000000000 --- a/target/linux/generic/pending-4.4/092-MIPS-ZBOOT-copy-appended-dtb-to-the-end-of-the-kerne.patch +++ /dev/null @@ -1,132 +0,0 @@ -From b8f54f2cde788623f41d11327688c75aed34092f Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jogo@openwrt.org> -Date: Mon, 20 Jun 2016 11:27:36 +0200 -Subject: [PATCH 1/2] MIPS: ZBOOT: copy appended dtb to the end of the kernel - -Instead of rewriting the arguments, just move the appended dtb to where -the decompressed kernel expects it. This eliminates the need for special -casing vmlinuz.bin appended dtb files. - -Signed-off-by: Jonas Gorski <jogo@openwrt.org> -Cc: Kevin Cernekee <cernekee@gmail.com> -Cc: Florian Fainelli <f.fainelli@gmail.com> -Cc: John Crispin <john@phrozen.org> -Cc: Paul Burton <paul.burton@imgtec.com> -Cc: James Hogan <james.hogan@imgtec.com> -Cc: Alban Bedel <albeu@free.fr> -Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -Cc: Antony Pavlov <antonynpavlov@gmail.com> -Cc: linux-mips@linux-mips.org -Patchwork: https://patchwork.linux-mips.org/patch/13698/ -Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---- - arch/mips/Kconfig | 22 ++-------------------- - arch/mips/boot/compressed/decompress.c | 17 +++++++++++++++++ - arch/mips/boot/compressed/head.S | 16 ---------------- - 3 files changed, 19 insertions(+), 36 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -2753,10 +2753,10 @@ choice - the documented boot protocol using a device tree. - - config MIPS_RAW_APPENDED_DTB -- bool "vmlinux.bin" -+ bool "vmlinux.bin or vmlinuz.bin" - help - With this option, the boot code will look for a device tree binary -- DTB) appended to raw vmlinux.bin (without decompressor). -+ DTB) appended to raw vmlinux.bin or vmlinuz.bin. - (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb). - - This is meant as a backward compatibility convenience for those -@@ -2768,24 +2768,6 @@ choice - look like a DTB header after a reboot if no actual DTB is appended - to vmlinux.bin. Do not leave this option active in a production kernel - if you don't intend to always append a DTB. -- -- config MIPS_ZBOOT_APPENDED_DTB -- bool "vmlinuz.bin" -- depends on SYS_SUPPORTS_ZBOOT -- help -- With this option, the boot code will look for a device tree binary -- DTB) appended to raw vmlinuz.bin (with decompressor). -- (e.g. cat vmlinuz.bin <filename>.dtb > vmlinuz_w_dtb). -- -- This is meant as a backward compatibility convenience for those -- systems with a bootloader that can't be upgraded to accommodate -- the documented boot protocol using a device tree. -- -- Beware that there is very little in terms of protection against -- this option being confused by leftover garbage in memory that might -- look like a DTB header after a reboot if no actual DTB is appended -- to vmlinuz.bin. Do not leave this option active in a production kernel -- if you don't intend to always append a DTB. - endchoice - - choice ---- a/arch/mips/boot/compressed/decompress.c -+++ b/arch/mips/boot/compressed/decompress.c -@@ -14,6 +14,7 @@ - #include <linux/types.h> - #include <linux/kernel.h> - #include <linux/string.h> -+#include <linux/libfdt.h> - - #include <asm/addrspace.h> - -@@ -36,6 +37,8 @@ extern void puthex(unsigned long long va - #define puthex(val) do {} while (0) - #endif - -+extern char __appended_dtb[]; -+ - void error(char *x) - { - puts("\n\n"); -@@ -114,6 +117,20 @@ void decompress_kernel(unsigned long boo - __decompress((char *)zimage_start, zimage_size, 0, 0, - (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, 0, error); - -+ if (IS_ENABLED(CONFIG_MIPS_RAW_APPENDED_DTB) && -+ fdt_magic((void *)&__appended_dtb) == FDT_MAGIC) { -+ unsigned int image_size, dtb_size; -+ -+ dtb_size = fdt_totalsize((void *)&__appended_dtb); -+ -+ /* last four bytes is always image size in little endian */ -+ image_size = le32_to_cpup((void *)&__image_end - 4); -+ -+ /* copy dtb to where the booted kernel will expect it */ -+ memcpy((void *)VMLINUX_LOAD_ADDRESS_ULL + image_size, -+ __appended_dtb, dtb_size); -+ } -+ - /* FIXME: should we flush cache here? */ - puts("Now, booting the kernel...\n"); - } ---- a/arch/mips/boot/compressed/head.S -+++ b/arch/mips/boot/compressed/head.S -@@ -25,22 +25,6 @@ start: - move s2, a2 - move s3, a3 - --#ifdef CONFIG_MIPS_ZBOOT_APPENDED_DTB -- PTR_LA t0, __appended_dtb --#ifdef CONFIG_CPU_BIG_ENDIAN -- li t1, 0xd00dfeed --#else -- li t1, 0xedfe0dd0 --#endif -- lw t2, (t0) -- bne t1, t2, not_found -- nop -- -- move s1, t0 -- PTR_LI s0, -2 --not_found: --#endif -- - /* Clear BSS */ - PTR_LA a0, _edata - PTR_LA a2, _end diff --git a/target/linux/generic/pending-4.4/093-MIPS-store-the-appended-dtb-address-in-a-variable.patch b/target/linux/generic/pending-4.4/093-MIPS-store-the-appended-dtb-address-in-a-variable.patch deleted file mode 100644 index d868d210aa..0000000000 --- a/target/linux/generic/pending-4.4/093-MIPS-store-the-appended-dtb-address-in-a-variable.patch +++ /dev/null @@ -1,132 +0,0 @@ -From 15f37e1588920e010f20b53f04af94e91b8ee714 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jogo@openwrt.org> -Date: Mon, 20 Jun 2016 11:27:37 +0200 -Subject: [PATCH] MIPS: store the appended dtb address in a variable - -Instead of rewriting the arguments to match the UHI spec, store the -address of a appended or UHI supplied dtb in fw_supplied_dtb. - -That way the original bootloader arugments are kept intact while still -making the use of an appended dtb invisible for mach code. - -Mach code can still find out if it is an appended dtb by comparing -fw_arg1 with fw_supplied_dtb. - -Signed-off-by: Jonas Gorski <jogo@openwrt.org> -Cc: Kevin Cernekee <cernekee@gmail.com> -Cc: Florian Fainelli <f.fainelli@gmail.com> -Cc: John Crispin <john@phrozen.org> -Cc: Paul Burton <paul.burton@imgtec.com> -Cc: James Hogan <james.hogan@imgtec.com> -Cc: Alban Bedel <albeu@free.fr> -Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -Cc: Antony Pavlov <antonynpavlov@gmail.com> -Cc: linux-mips@linux-mips.org -Patchwork: https://patchwork.linux-mips.org/patch/13699/ -Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---- - arch/mips/ath79/setup.c | 4 ++-- - arch/mips/bmips/setup.c | 4 ++-- - arch/mips/include/asm/bootinfo.h | 4 ++++ - arch/mips/kernel/head.S | 21 ++++++++++++++------- - arch/mips/kernel/setup.c | 4 ++++ - arch/mips/lantiq/prom.c | 4 ++-- - arch/mips/pic32/pic32mzda/init.c | 4 ++-- - 7 files changed, 30 insertions(+), 15 deletions(-) - ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -207,6 +207,8 @@ void __init plat_mem_setup(void) - fdt_start = fw_getenvl("fdt_start"); - if (fdt_start) - __dt_setup_arch((void *)KSEG0ADDR(fdt_start)); -+ else if (fw_passed_dtb) -+ __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb)); - #ifdef CONFIG_BUILTIN_DTB - else - __dt_setup_arch(__dtb_start); ---- a/arch/mips/bmips/setup.c -+++ b/arch/mips/bmips/setup.c -@@ -149,8 +149,8 @@ void __init plat_mem_setup(void) - /* intended to somewhat resemble ARM; see Documentation/arm/Booting */ - if (fw_arg0 == 0 && fw_arg1 == 0xffffffff) - dtb = phys_to_virt(fw_arg2); -- else if (fw_arg0 == -2) /* UHI interface */ -- dtb = (void *)fw_arg1; -+ else if (fw_passed_dtb) /* UHI interface */ -+ dtb = (void *)fw_passed_dtb; - else if (__dtb_start != __dtb_end) - dtb = (void *)__dtb_start; - else ---- a/arch/mips/include/asm/bootinfo.h -+++ b/arch/mips/include/asm/bootinfo.h -@@ -127,6 +127,10 @@ extern char arcs_cmdline[COMMAND_LINE_SI - */ - extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; - -+#ifdef CONFIG_USE_OF -+extern unsigned long fw_passed_dtb; -+#endif -+ - /* - * Platform memory detection hook called by setup_arch - */ ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -94,21 +94,24 @@ NESTED(kernel_entry, 16, sp) # kernel - jr t0 - 0: - -+#ifdef CONFIG_USE_OF - #ifdef CONFIG_MIPS_RAW_APPENDED_DTB -- PTR_LA t0, __appended_dtb -+ PTR_LA t2, __appended_dtb - - #ifdef CONFIG_CPU_BIG_ENDIAN - li t1, 0xd00dfeed - #else - li t1, 0xedfe0dd0 - #endif -- lw t2, (t0) -- bne t1, t2, not_found -- nop -- -- move a1, t0 -- PTR_LI a0, -2 --not_found: -+ lw t0, (t2) -+ beq t0, t1, dtb_found -+#endif -+ li t1, -2 -+ beq a0, t1, dtb_found -+ move t2, a1 -+ -+ li t2, 0 -+dtb_found: - #endif - PTR_LA t0, __bss_start # clear .bss - LONG_S zero, (t0) -@@ -123,6 +126,10 @@ not_found: - LONG_S a2, fw_arg2 - LONG_S a3, fw_arg3 - -+#ifdef CONFIG_USE_OF -+ LONG_S t2, fw_passed_dtb -+#endif -+ - MTC0 zero, CP0_CONTEXT # clear context register - PTR_LA $28, init_thread_union - /* Set the SP after an empty pt_regs. */ ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -886,6 +886,10 @@ void __init setup_arch(char **cmdline_p) - unsigned long kernelsp[NR_CPUS]; - unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; - -+#ifdef CONFIG_USE_OF -+unsigned long fw_passed_dtb; -+#endif -+ - #ifdef CONFIG_DEBUG_FS - struct dentry *mips_debugfs_dir; - static int __init debugfs_mips(void) diff --git a/target/linux/generic/pending-4.4/094-MIPS-c-r4k-Fix-size-calc-when-avoiding-IPIs-for-smal.patch b/target/linux/generic/pending-4.4/094-MIPS-c-r4k-Fix-size-calc-when-avoiding-IPIs-for-smal.patch deleted file mode 100644 index 733d9c77b3..0000000000 --- a/target/linux/generic/pending-4.4/094-MIPS-c-r4k-Fix-size-calc-when-avoiding-IPIs-for-smal.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: Paul Burton <paul.burton@imgtec.com> -Date: Mon, 5 Sep 2016 15:24:54 +0100 -Subject: [PATCH] MIPS: c-r4k: Fix size calc when avoiding IPIs for small - icache flushes - -Commit f70ddc07b637 ("MIPS: c-r4k: Avoid small flush_icache_range SMP -calls") adds checks to force use of hit-type cache ops for small icache -flushes where they are globalised & index-type cache ops aren't, in -order to avoid the overhead of IPIs in those cases. However it -calculated the size of the region being flushed incorrectly, subtracting -the end address from the start address rather than the reverse. This -would have led to an overflow with size wrapping round to some large -value, and likely to the special case for avoiding IPIs not actually -being hit. - -Signed-off-by: Paul Burton <paul.burton@imgtec.com> -Cc: James Hogan <james.hogan@imgtec.com> -Fixes: f70ddc07b637 ("MIPS: c-r4k: Avoid small flush_icache_range SMP calls") -Reviewed-by: James Hogan <james.hogan@imgtec.com> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Cc: Huacai Chen <chenhc@lemote.com> -Cc: linux-mips@linux-mips.org -Cc: linux-kernel@vger.kernel.org -Patchwork: https://patchwork.linux-mips.org/patch/14211/ -Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---- - ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -781,7 +781,7 @@ static void r4k_flush_icache_range(unsig - * If address-based cache ops are globalized, then we may be - * able to avoid the IPI for small flushes. - */ -- size = start - end; -+ size = end - start; - cache_size = icache_size; - if (!cpu_has_ic_fills_f_dc) { - size *= 2; diff --git a/target/linux/generic/pending-4.4/096-arc-add-model-property-in-dts.patch b/target/linux/generic/pending-4.4/096-arc-add-model-property-in-dts.patch deleted file mode 100644 index 85019ed008..0000000000 --- a/target/linux/generic/pending-4.4/096-arc-add-model-property-in-dts.patch +++ /dev/null @@ -1,163 +0,0 @@ -From f1e53ac0a99e3754465bd87ae1a6fdbfb8340d15 Mon Sep 17 00:00:00 2001 -From: Alexey Brodkin <abrodkin@synopsys.com> -Date: Mon, 15 Aug 2016 14:42:44 +0300 -Subject: [PATCH] arc: Add "model" properly in device tree description of all - boards - -As it was discussed quite some time ago (see -https://lkml.org/lkml/2015/11/5/862) it's a good practice to add -"model" property in .dts. Moreover as per ePAPR "model" property is -required and should look like "manufacturer,model" so we do here. - -Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> -Cc: Vineet Gupta <vgupta@synopsys.com> -Cc: Jonas Gorski <jonas.gorski@gmail.com> -Cc: Arnd Bergmann <arnd@arndb.de> -Cc: Rob Herring <robh@kernel.org> -Cc: Christian Ruppert <christian.ruppert@alitech.com> ---- - arch/arc/boot/dts/abilis_tb100_dvk.dts | 1 + - arch/arc/boot/dts/abilis_tb101_dvk.dts | 1 + - arch/arc/boot/dts/axs101.dts | 1 + - arch/arc/boot/dts/axs103.dts | 1 + - arch/arc/boot/dts/axs103_idu.dts | 1 + - arch/arc/boot/dts/nsim_700.dts | 1 + - arch/arc/boot/dts/nsim_hs.dts | 1 + - arch/arc/boot/dts/nsim_hs_idu.dts | 1 + - arch/arc/boot/dts/nsimosci.dts | 1 + - arch/arc/boot/dts/nsimosci_hs.dts | 1 + - arch/arc/boot/dts/nsimosci_hs_idu.dts | 1 + - arch/arc/boot/dts/vdk_hs38.dts | 1 + - arch/arc/boot/dts/vdk_hs38_smp.dts | 1 + - 13 files changed, 13 insertions(+) - ---- a/arch/arc/boot/dts/abilis_tb100_dvk.dts -+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts -@@ -24,6 +24,7 @@ - /include/ "abilis_tb100.dtsi" - - / { -+ model = "abilis,tb100"; - chosen { - bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; - }; ---- a/arch/arc/boot/dts/abilis_tb101_dvk.dts -+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts -@@ -24,6 +24,7 @@ - /include/ "abilis_tb101.dtsi" - - / { -+ model = "abilis,tb101"; - chosen { - bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; - }; ---- a/arch/arc/boot/dts/axs101.dts -+++ b/arch/arc/boot/dts/axs101.dts -@@ -13,6 +13,7 @@ - /include/ "axs10x_mb.dtsi" - - / { -+ model = "snps,axs101"; - compatible = "snps,axs101", "snps,arc-sdp"; - - chosen { ---- a/arch/arc/boot/dts/axs103.dts -+++ b/arch/arc/boot/dts/axs103.dts -@@ -16,6 +16,7 @@ - /include/ "axs10x_mb.dtsi" - - / { -+ model = "snps,axs103"; - compatible = "snps,axs103", "snps,arc-sdp"; - - chosen { ---- a/arch/arc/boot/dts/axs103_idu.dts -+++ b/arch/arc/boot/dts/axs103_idu.dts -@@ -16,6 +16,7 @@ - /include/ "axs10x_mb.dtsi" - - / { -+ model = "snps,axs103-smp"; - compatible = "snps,axs103", "snps,arc-sdp"; - - chosen { ---- a/arch/arc/boot/dts/nsim_700.dts -+++ b/arch/arc/boot/dts/nsim_700.dts -@@ -10,6 +10,7 @@ - /include/ "skeleton.dtsi" - - / { -+ model = "snps,nsim"; - compatible = "snps,nsim"; - clock-frequency = <80000000>; /* 80 MHZ */ - #address-cells = <1>; ---- a/arch/arc/boot/dts/nsim_hs.dts -+++ b/arch/arc/boot/dts/nsim_hs.dts -@@ -10,6 +10,7 @@ - /include/ "skeleton.dtsi" - - / { -+ model = "snps,nsim_hs"; - compatible = "snps,nsim_hs"; - #address-cells = <2>; - #size-cells = <2>; ---- a/arch/arc/boot/dts/nsim_hs_idu.dts -+++ b/arch/arc/boot/dts/nsim_hs_idu.dts -@@ -10,6 +10,7 @@ - /include/ "skeleton.dtsi" - - / { -+ model = "snps,nsim_hs-smp"; - compatible = "snps,nsim_hs"; - interrupt-parent = <&core_intc>; - ---- a/arch/arc/boot/dts/nsimosci.dts -+++ b/arch/arc/boot/dts/nsimosci.dts -@@ -10,6 +10,7 @@ - /include/ "skeleton.dtsi" - - / { -+ model = "snps,nsimosci"; - compatible = "snps,nsimosci"; - clock-frequency = <20000000>; /* 20 MHZ */ - #address-cells = <1>; ---- a/arch/arc/boot/dts/nsimosci_hs.dts -+++ b/arch/arc/boot/dts/nsimosci_hs.dts -@@ -10,6 +10,7 @@ - /include/ "skeleton.dtsi" - - / { -+ model = "snps,nsimosci_hs"; - compatible = "snps,nsimosci_hs"; - clock-frequency = <20000000>; /* 20 MHZ */ - #address-cells = <1>; ---- a/arch/arc/boot/dts/nsimosci_hs_idu.dts -+++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts -@@ -10,6 +10,7 @@ - /include/ "skeleton.dtsi" - - / { -+ model = "snps,nsimosci_hs-smp"; - compatible = "snps,nsimosci_hs"; - clock-frequency = <5000000>; /* 5 MHZ */ - #address-cells = <1>; ---- a/arch/arc/boot/dts/vdk_hs38.dts -+++ b/arch/arc/boot/dts/vdk_hs38.dts -@@ -13,6 +13,7 @@ - /include/ "vdk_axs10x_mb.dtsi" - - / { -+ model = "snps,vdk_archs"; - compatible = "snps,axs103"; - - chosen { ---- a/arch/arc/boot/dts/vdk_hs38_smp.dts -+++ b/arch/arc/boot/dts/vdk_hs38_smp.dts -@@ -13,6 +13,7 @@ - /include/ "vdk_axs10x_mb.dtsi" - - / { -+ model = "snps,vdk_archs-smp"; - compatible = "snps,axs103"; - - chosen { diff --git a/target/linux/generic/pending-4.4/097-MIPS-io.h-Define-ioremap_cache.patch b/target/linux/generic/pending-4.4/097-MIPS-io.h-Define-ioremap_cache.patch deleted file mode 100644 index e048410e42..0000000000 --- a/target/linux/generic/pending-4.4/097-MIPS-io.h-Define-ioremap_cache.patch +++ /dev/null @@ -1,29 +0,0 @@ -From a68f376844605399cbd28b662d5ed213639f46f7 Mon Sep 17 00:00:00 2001 -From: "Maciej W. Rozycki" <macro@imgtec.com> -Date: Sat, 9 Jan 2016 02:05:31 +0000 -Subject: [PATCH] MIPS: io.h: Define `ioremap_cache' -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> -Cc: Brian Norris <computersforpeace@gmail.com> -Cc: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Cc: linux-mips@linux-mips.org -Cc: linux-kernel@vger.kernel.org -Patchwork: https://patchwork.linux-mips.org/patch/12040/ -Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---- - arch/mips/include/asm/io.h | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/mips/include/asm/io.h -+++ b/arch/mips/include/asm/io.h -@@ -275,6 +275,7 @@ static inline void __iomem * __ioremap_m - */ - #define ioremap_cachable(offset, size) \ - __ioremap_mode((offset), (size), _page_cachable_default) -+#define ioremap_cache ioremap_cachable - - /* - * These two are MIPS specific ioremap variant. ioremap_cacheable_cow diff --git a/target/linux/generic/pending-4.4/098-usb-dwc2-Remove-unnecessary-kfree.patch b/target/linux/generic/pending-4.4/098-usb-dwc2-Remove-unnecessary-kfree.patch deleted file mode 100644 index 3a27feac8f..0000000000 --- a/target/linux/generic/pending-4.4/098-usb-dwc2-Remove-unnecessary-kfree.patch +++ /dev/null @@ -1,24 +0,0 @@ -From cd4b1e34655d46950c065d9284b596cd8d7b28cd Mon Sep 17 00:00:00 2001 -From: John Youn <johnyoun@synopsys.com> -Date: Thu, 3 Nov 2016 17:55:45 -0700 -Subject: [PATCH] usb: dwc2: Remove unnecessary kfree - -This shouldn't be freed by the HCD as it is owned by the core and -allocated with devm_kzalloc. - -Signed-off-by: John Youn <johnyoun@synopsys.com> -Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> ---- - drivers/usb/dwc2/hcd.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/usb/dwc2/hcd.c -+++ b/drivers/usb/dwc2/hcd.c -@@ -3160,7 +3160,6 @@ error3: - error2: - usb_put_hcd(hcd); - error1: -- kfree(hsotg->core_params); - - #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS - kfree(hsotg->last_frame_num_array); diff --git a/target/linux/generic/pending-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch b/target/linux/generic/pending-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch deleted file mode 100644 index e4ac2cd583..0000000000 --- a/target/linux/generic/pending-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Sun, 24 Jan 2016 01:03:51 +0100 -Subject: [PATCH] MIPS: fix cache flushing for highmem pages - -Most cache flush ops were no-op for highmem pages. This led to nasty -segfaults and (in the case of page_address(page) == NULL) kernel -crashes. - -Fix this by always flushing highmem pages using kmap/kunmap_atomic -around the actual cache flush. This might be a bit inefficient, but at -least it's stable. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -111,6 +111,13 @@ void __flush_anon_page(struct page *page - { - unsigned long addr = (unsigned long) page_address(page); - -+ if (PageHighMem(page)) { -+ addr = (unsigned long)kmap_atomic(page); -+ flush_data_cache_page(addr); -+ __kunmap_atomic((void *)addr); -+ return; -+ } -+ - if (pages_do_alias(addr, vmaddr)) { - if (page_mapped(page) && !Page_dcache_dirty(page)) { - void *kaddr; diff --git a/target/linux/generic/pending-4.4/102-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-4.4/102-ehci_hcd_ignore_oc.patch deleted file mode 100644 index 71e3a74ad5..0000000000 --- a/target/linux/generic/pending-4.4/102-ehci_hcd_ignore_oc.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 1e311820ec3055e3f08e687de6564692a7cec675 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <florian@openwrt.org> -Date: Mon, 28 Jan 2013 20:06:29 +0100 -Subject: [PATCH 11/12] USB: EHCI: add ignore_oc flag to disable overcurrent - checking - -This patch adds an ignore_oc flag which can be set by EHCI controller -not supporting or wanting to disable overcurrent checking. The EHCI -platform data in include/linux/usb/ehci_pdriver.h is also augmented to -take advantage of this new flag. - -Signed-off-by: Florian Fainelli <florian@openwrt.org> ---- - drivers/usb/host/ehci-hcd.c | 2 +- - drivers/usb/host/ehci-hub.c | 4 ++-- - drivers/usb/host/ehci-platform.c | 1 + - drivers/usb/host/ehci.h | 1 + - include/linux/usb/ehci_pdriver.h | 1 + - 5 files changed, 6 insertions(+), 3 deletions(-) - ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -639,7 +639,7 @@ static int ehci_run (struct usb_hcd *hcd - "USB %x.%x started, EHCI %x.%02x%s\n", - ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - temp >> 8, temp & 0xff, -- ignore_oc ? ", overcurrent ignored" : ""); -+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : ""); - - ehci_writel(ehci, INTR_MASK, - &ehci->regs->intr_enable); /* Turn On Interrupts */ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -634,7 +634,7 @@ ehci_hub_status_data (struct usb_hcd *hc - * always set, seem to clear PORT_OCC and PORT_CSC when writing to - * PORT_POWER; that's surprising, but maybe within-spec. - */ -- if (!ignore_oc) -+ if (!ignore_oc && !ehci->ignore_oc) - mask = PORT_CSC | PORT_PEC | PORT_OCC; - else - mask = PORT_CSC | PORT_PEC; -@@ -996,7 +996,7 @@ int ehci_hub_control( - if (temp & PORT_PEC) - status |= USB_PORT_STAT_C_ENABLE << 16; - -- if ((temp & PORT_OCC) && !ignore_oc){ -+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){ - status |= USB_PORT_STAT_C_OVERCURRENT << 16; - - /* ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -254,6 +254,8 @@ static int ehci_platform_probe(struct pl - hcd->has_tt = 1; - if (pdata->reset_on_resume) - priv->reset_on_resume = true; -+ if (pdata->ignore_oc) -+ ehci->ignore_oc = 1; - - #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO - if (ehci->big_endian_mmio) { ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -227,6 +227,7 @@ struct ehci_hcd { /* one per controlle - unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ - unsigned need_oc_pp_cycle:1; /* MPC834X port power */ - unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ -+ unsigned ignore_oc:1; - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) ---- a/include/linux/usb/ehci_pdriver.h -+++ b/include/linux/usb/ehci_pdriver.h -@@ -49,6 +49,7 @@ struct usb_ehci_pdata { - unsigned no_io_watchdog:1; - unsigned reset_on_resume:1; - unsigned dma_mask_64:1; -+ unsigned ignore_oc:1; - - /* Turn on all power and clocks */ - int (*power_on)(struct platform_device *pdev); diff --git a/target/linux/generic/pending-4.4/103-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-4.4/103-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch deleted file mode 100644 index a53be2d15c..0000000000 --- a/target/linux/generic/pending-4.4/103-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch +++ /dev/null @@ -1,86 +0,0 @@ -From: Tobias Wolf <dev-NTEO@vplace.de> -Date: Wed, 30 Nov 2016 09:16:41 +0100 -Subject: [PATCH] mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET - calculation - -Dear folks, - -An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any -kernel beyond version 4.3 resulting in: - -BUG: Bad page state in process swapper pfn:086ac - -bisect resulted in: - -a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit -commit a1c34a3bf00af2cede839879502e12dc68491ad5 -Author: Laura Abbott <laura@labbott.name> -Date: Thu Nov 5 18:48:46 2015 -0800 - - mm: Don't offset memmap for flatmem - - Srinivas Kandagatla reported bad page messages when trying to remove the - bottom 2MB on an ARM based IFC6410 board - - BUG: Bad page state in process swapper pfn:fffa8 - page:ef7fb500 count:0 mapcount:0 mapping: (null) index:0x0 - flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked) - page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set - bad because of flags: - flags: 0x200041(locked|active|mlocked) - Modules linked in: - CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty -#816 - Hardware name: Qualcomm (Flattened Device Tree) - unwind_backtrace - show_stack - dump_stack - bad_page - free_pages_prepare - free_hot_cold_page - __free_pages - free_highmem_page - mem_init - start_kernel - Disabling lock debugging due to kernel taint - [...] -:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4 -0a8156f848733dfa21e16c196dfb6c0a76290709 M mm - -This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by -page_to_pfn anymore. - -The following output was generated with two hacked in printk statements: - -printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map - -(pgdat->node_start_pfn - ARCH_PFN_OFFSET)); - if (page_to_pfn(mem_map) != pgdat->node_start_pfn) - mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET); -printk("after %p\n", mem_map); - -Output: - -[ 0.000000] before 8861b280 vs. 8861b280 or 8851b280 -[ 0.000000] after 8851b280 - -As seen in the first line mem_map with subtraction of offset does not equal the -mem_map after subtraction of ARCH_PFN_OFFSET. - -After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the -previously calculated offset is zero for the named platform it is able to boot -4.4 and 4.9-rc7 again. - -Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de> ---- - ---- a/mm/page_alloc.c -+++ b/mm/page_alloc.c -@@ -5372,7 +5372,7 @@ static void __init_refok alloc_node_mem_ - mem_map = NODE_DATA(0)->node_mem_map; - #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM) - if (page_to_pfn(mem_map) != pgdat->node_start_pfn) -- mem_map -= offset; -+ mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET); - #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */ - } - #endif diff --git a/target/linux/generic/pending-4.4/105-add-linux-spidev-compatible.patch b/target/linux/generic/pending-4.4/105-add-linux-spidev-compatible.patch deleted file mode 100644 index cae20a532a..0000000000 --- a/target/linux/generic/pending-4.4/105-add-linux-spidev-compatible.patch +++ /dev/null @@ -1,15 +0,0 @@ -Add the linux,spidev compatible in spidev -Several device in ramips have this binding in the dts - -Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> ---- ---- a/drivers/spi/spidev.c -+++ b/drivers/spi/spidev.c -@@ -695,6 +695,7 @@ static struct class *spidev_class; - static const struct of_device_id spidev_dt_ids[] = { - { .compatible = "rohm,dh2228fv" }, - { .compatible = "lineartechnology,ltc2488" }, -+ { .compatible = "siliconlabs,si3210" }, - {}, - }; - MODULE_DEVICE_TABLE(of, spidev_dt_ids); diff --git a/target/linux/generic/pending-4.4/106-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch b/target/linux/generic/pending-4.4/106-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch deleted file mode 100644 index 57c9475359..0000000000 --- a/target/linux/generic/pending-4.4/106-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Fri, 30 Dec 2016 14:53:45 +0100 -Subject: [PATCH] spi: use gpio_set_value_cansleep for setting chipselect GPIO - -Sleeping is safe inside spi_transfer_one_message, and some GPIO chips -need to sleep for setting values - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -674,7 +674,7 @@ static void spi_set_cs(struct spi_device - enable = !enable; - - if (gpio_is_valid(spi->cs_gpio)) -- gpio_set_value(spi->cs_gpio, !enable); -+ gpio_set_value_cansleep(spi->cs_gpio, !enable); - else if (spi->master->set_cs) - spi->master->set_cs(spi, !enable); - } diff --git a/target/linux/generic/pending-4.4/110-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-4.4/110-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch deleted file mode 100644 index b7ff845343..0000000000 --- a/target/linux/generic/pending-4.4/110-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch +++ /dev/null @@ -1,86 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Fri, 10 Apr 2015 13:35:29 +0200 -Subject: [PATCH] jffs2: use .rename2 and add RENAME_WHITEOUT support - -It is required for renames on overlayfs - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/fs/jffs2/dir.c -+++ b/fs/jffs2/dir.c -@@ -35,7 +35,7 @@ static int jffs2_mkdir (struct inode *,s - static int jffs2_rmdir (struct inode *,struct dentry *); - static int jffs2_mknod (struct inode *,struct dentry *,umode_t,dev_t); - static int jffs2_rename (struct inode *, struct dentry *, -- struct inode *, struct dentry *); -+ struct inode *, struct dentry *, unsigned int); - - const struct file_operations jffs2_dir_operations = - { -@@ -57,7 +57,7 @@ const struct inode_operations jffs2_dir_ - .mkdir = jffs2_mkdir, - .rmdir = jffs2_rmdir, - .mknod = jffs2_mknod, -- .rename = jffs2_rename, -+ .rename2 = jffs2_rename, - .get_acl = jffs2_get_acl, - .set_acl = jffs2_set_acl, - .setattr = jffs2_setattr, -@@ -754,8 +754,27 @@ static int jffs2_mknod (struct inode *di - return ret; - } - -+static int jffs2_whiteout(struct inode *old_dir, struct dentry *old_dentry) -+{ -+ struct dentry *wh; -+ int err; -+ -+ wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name); -+ if (!wh) -+ return -ENOMEM; -+ -+ err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE, -+ WHITEOUT_DEV); -+ if (err) -+ return err; -+ -+ d_rehash(wh); -+ return 0; -+} -+ - static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry, -- struct inode *new_dir_i, struct dentry *new_dentry) -+ struct inode *new_dir_i, struct dentry *new_dentry, -+ unsigned int flags) - { - int ret; - struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb); -@@ -763,6 +782,9 @@ static int jffs2_rename (struct inode *o - uint8_t type; - uint32_t now; - -+ if (flags & ~RENAME_WHITEOUT) -+ return -EINVAL; -+ - /* The VFS will check for us and prevent trying to rename a - * file over a directory and vice versa, but if it's a directory, - * the VFS can't check whether the victim is empty. The filesystem -@@ -826,9 +848,14 @@ static int jffs2_rename (struct inode *o - if (d_is_dir(old_dentry) && !victim_f) - inc_nlink(new_dir_i); - -- /* Unlink the original */ -- ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i), -- old_dentry->d_name.name, old_dentry->d_name.len, NULL, now); -+ if (flags & RENAME_WHITEOUT) -+ /* Replace with whiteout */ -+ ret = jffs2_whiteout(old_dir_i, old_dentry); -+ else -+ /* Unlink the original */ -+ ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i), -+ old_dentry->d_name.name, -+ old_dentry->d_name.len, NULL, now); - - /* We don't touch inode->i_nlink */ - diff --git a/target/linux/generic/pending-4.4/111-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-4.4/111-jffs2-add-RENAME_EXCHANGE-support.patch deleted file mode 100644 index 37eb073df9..0000000000 --- a/target/linux/generic/pending-4.4/111-jffs2-add-RENAME_EXCHANGE-support.patch +++ /dev/null @@ -1,81 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Sat, 25 Apr 2015 12:41:32 +0200 -Subject: [PATCH] jffs2: add RENAME_EXCHANGE support - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/fs/jffs2/dir.c -+++ b/fs/jffs2/dir.c -@@ -779,18 +779,31 @@ static int jffs2_rename (struct inode *o - int ret; - struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb); - struct jffs2_inode_info *victim_f = NULL; -+ struct inode *fst_inode = d_inode(old_dentry); -+ struct inode *snd_inode = d_inode(new_dentry); - uint8_t type; - uint32_t now; - -- if (flags & ~RENAME_WHITEOUT) -+ if (flags & ~(RENAME_WHITEOUT | RENAME_EXCHANGE)) - return -EINVAL; - -+ if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) { -+ if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) { -+ inc_nlink(new_dir_i); -+ drop_nlink(old_dir_i); -+ } -+ else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) { -+ drop_nlink(new_dir_i); -+ inc_nlink(old_dir_i); -+ } -+ } -+ - /* The VFS will check for us and prevent trying to rename a - * file over a directory and vice versa, but if it's a directory, - * the VFS can't check whether the victim is empty. The filesystem - * needs to do that for itself. - */ -- if (d_really_is_positive(new_dentry)) { -+ if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) { - victim_f = JFFS2_INODE_INFO(d_inode(new_dentry)); - if (d_is_dir(new_dentry)) { - struct jffs2_full_dirent *fd; -@@ -825,7 +838,7 @@ static int jffs2_rename (struct inode *o - if (ret) - return ret; - -- if (victim_f) { -+ if (victim_f && !(flags & RENAME_EXCHANGE)) { - /* There was a victim. Kill it off nicely */ - if (d_is_dir(new_dentry)) - clear_nlink(d_inode(new_dentry)); -@@ -845,12 +858,18 @@ static int jffs2_rename (struct inode *o - - /* If it was a directory we moved, and there was no victim, - increase i_nlink on its new parent */ -- if (d_is_dir(old_dentry) && !victim_f) -+ if (d_is_dir(old_dentry) && !victim_f && !(flags & RENAME_EXCHANGE)) - inc_nlink(new_dir_i); - - if (flags & RENAME_WHITEOUT) - /* Replace with whiteout */ - ret = jffs2_whiteout(old_dir_i, old_dentry); -+ else if (flags & RENAME_EXCHANGE) -+ /* Replace the original */ -+ ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i), -+ d_inode(new_dentry)->i_ino, type, -+ old_dentry->d_name.name, old_dentry->d_name.len, -+ now); - else - /* Unlink the original */ - ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i), -@@ -882,7 +901,7 @@ static int jffs2_rename (struct inode *o - return ret; - } - -- if (d_is_dir(old_dentry)) -+ if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE)) - drop_nlink(old_dir_i); - - new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now); diff --git a/target/linux/generic/pending-4.4/120-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-4.4/120-bridge_allow_receiption_on_disabled_port.patch deleted file mode 100644 index bba6074982..0000000000 --- a/target/linux/generic/pending-4.4/120-bridge_allow_receiption_on_disabled_port.patch +++ /dev/null @@ -1,54 +0,0 @@ -From: Stephen Hemminger <stephen@networkplumber.org> -Subject: bridge: allow receiption on disabled port - -When an ethernet device is enslaved to a bridge, and the bridge STP -detects loss of carrier (or operational state down), then normally -packet receiption is blocked. - -This breaks control applications like WPA which maybe expecting to -receive packets to negotiate to bring link up. The bridge needs to -block forwarding packets from these disabled ports, but there is no -hard requirement to not allow local packet delivery. - -Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -218,11 +218,13 @@ EXPORT_SYMBOL_GPL(br_handle_frame_finish - static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb) - { - struct net_bridge_port *p = br_port_get_rcu(skb->dev); -- u16 vid = 0; -+ if (p->state != BR_STATE_DISABLED) { -+ u16 vid = 0; - -- /* check if vlan is allowed, to avoid spoofing */ -- if (p->flags & BR_LEARNING && br_should_learn(p, skb, &vid)) -- br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false); -+ /* check if vlan is allowed, to avoid spoofing */ -+ if (p->flags & BR_LEARNING && br_should_learn(p, skb, &vid)) -+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false); -+ } - return 0; /* process further */ - } - -@@ -297,6 +299,18 @@ rx_handler_result_t br_handle_frame(stru - - forward: - switch (p->state) { -+ case BR_STATE_DISABLED: -+ if (ether_addr_equal(p->br->dev->dev_addr, dest)) -+ skb->pkt_type = PACKET_HOST; -+ -+ if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, dev_net(skb->dev), NULL, skb, skb->dev, NULL, -+ br_handle_local_finish)) -+ break; -+ -+ BR_INPUT_SKB_CB(skb)->brdev = p->br->dev; -+ br_pass_frame_up(skb); -+ break; -+ - case BR_STATE_FORWARDING: - rhook = rcu_dereference(br_should_route_hook); - if (rhook) { diff --git a/target/linux/generic/pending-4.4/132-mips_inline_dma_ops.patch b/target/linux/generic/pending-4.4/132-mips_inline_dma_ops.patch deleted file mode 100644 index 143b0bb3ff..0000000000 --- a/target/linux/generic/pending-4.4/132-mips_inline_dma_ops.patch +++ /dev/null @@ -1,778 +0,0 @@ -From 2c58080407554e1bac8fd50d23cb02420524caed Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@nbd.name> -Date: Mon, 12 Aug 2013 12:50:22 +0200 -Subject: [PATCH] MIPS: partially inline dma ops - -Several DMA ops are no-op on many platforms, and the indirection through -the mips_dma_map_ops function table is causing the compiler to emit -unnecessary code. - -Inlining visibly improves network performance in my tests (on a 24Kc -based system), and also slightly reduces code size of a few drivers. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - arch/mips/Kconfig | 4 + - arch/mips/include/asm/dma-mapping.h | 360 +++++++++++++++++++++++++++++++++++- - arch/mips/mm/dma-default.c | 163 ++-------------- - 3 files changed, 373 insertions(+), 154 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -1619,6 +1619,7 @@ config CPU_CAVIUM_OCTEON - select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN - select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN - select MIPS_L1_CACHE_SHIFT_7 -+ select SYS_HAS_DMA_OPS - help - The Cavium Octeon processor is a highly integrated chip containing - many ethernet hardware widgets for networking tasks. The processor -@@ -1914,6 +1915,9 @@ config MIPS_MALTA_PM - bool - default y - -+config SYS_HAS_DMA_OPS -+ bool -+ - # - # CPU may reorder R->R, R->W, W->R, W->W - # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC ---- a/arch/mips/include/asm/dma-mapping.h -+++ b/arch/mips/include/asm/dma-mapping.h -@@ -1,9 +1,16 @@ - #ifndef _ASM_DMA_MAPPING_H - #define _ASM_DMA_MAPPING_H - -+#include <linux/kmemcheck.h> -+#include <linux/bug.h> - #include <linux/scatterlist.h> -+#include <linux/dma-debug.h> -+#include <linux/dma-attrs.h> -+ - #include <asm/dma-coherence.h> - #include <asm/cache.h> -+#include <asm/cpu-type.h> -+#include <asm-generic/dma-coherent.h> - - #ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */ - #include <dma-coherence.h> -@@ -11,12 +18,53 @@ - - extern struct dma_map_ops *mips_dma_map_ops; - -+void __dma_sync(struct page *page, unsigned long offset, size_t size, -+ enum dma_data_direction direction); -+void *mips_dma_alloc_coherent(struct device *dev, size_t size, -+ dma_addr_t *dma_handle, gfp_t gfp, -+ struct dma_attrs *attrs); -+void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr, -+ dma_addr_t dma_handle, struct dma_attrs *attrs); -+ - static inline struct dma_map_ops *get_dma_ops(struct device *dev) - { -+#ifdef CONFIG_SYS_HAS_DMA_OPS - if (dev && dev->archdata.dma_ops) - return dev->archdata.dma_ops; - else - return mips_dma_map_ops; -+#else -+ return NULL; -+#endif -+} -+ -+/* -+ * The affected CPUs below in 'cpu_needs_post_dma_flush()' can -+ * speculatively fill random cachelines with stale data at any time, -+ * requiring an extra flush post-DMA. -+ * -+ * Warning on the terminology - Linux calls an uncached area coherent; -+ * MIPS terminology calls memory areas with hardware maintained coherency -+ * coherent. -+ * -+ * Note that the R14000 and R16000 should also be checked for in this -+ * condition. However this function is only called on non-I/O-coherent -+ * systems and only the R10000 and R12000 are used in such systems, the -+ * SGI IP28 Indigo² rsp. SGI IP32 aka O2. -+ */ -+static inline int cpu_needs_post_dma_flush(struct device *dev) -+{ -+ return !plat_device_is_coherent(dev) && -+ (boot_cpu_type() == CPU_R10000 || -+ boot_cpu_type() == CPU_R12000 || -+ boot_cpu_type() == CPU_BMIPS5000); -+} -+ -+static inline struct page *dma_addr_to_page(struct device *dev, -+ dma_addr_t dma_addr) -+{ -+ return pfn_to_page( -+ plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT); - } - - static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -@@ -29,9 +77,399 @@ static inline bool dma_capable(struct de - - static inline void dma_mark_clean(void *addr, size_t size) {} - --#include <asm-generic/dma-mapping-common.h> -+static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr, -+ size_t size, -+ enum dma_data_direction dir, -+ struct dma_attrs *attrs) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ unsigned long offset = (unsigned long)ptr & ~PAGE_MASK; -+ struct page *page = virt_to_page(ptr); -+ dma_addr_t addr; -+ -+ kmemcheck_mark_initialized(ptr, size); -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ addr = ops->map_page(dev, page, offset, size, dir, attrs); -+ } else { -+ if (!plat_device_is_coherent(dev)) -+ __dma_sync(page, offset, size, dir); -+ -+ addr = plat_map_dma_mem_page(dev, page) + offset; -+ } -+ debug_dma_map_page(dev, page, offset, size, dir, addr, true); -+ return addr; -+} -+ -+static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t addr, -+ size_t size, -+ enum dma_data_direction dir, -+ struct dma_attrs *attrs) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ ops->unmap_page(dev, addr, size, dir, attrs); -+ } else { -+ if (cpu_needs_post_dma_flush(dev)) -+ __dma_sync(dma_addr_to_page(dev, addr), -+ addr & ~PAGE_MASK, size, dir); -+ plat_post_dma_flush(dev); -+ plat_unmap_dma_mem(dev, addr, size, dir); -+ } -+ debug_dma_unmap_page(dev, addr, size, dir, true); -+} -+ -+/* -+ * dma_maps_sg_attrs returns 0 on error and > 0 on success. -+ * It should never return a value < 0. -+ */ -+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, -+ int nents, enum dma_data_direction dir, -+ struct dma_attrs *attrs) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ int i, ents; -+ struct scatterlist *s; -+ -+ for_each_sg(sg, s, nents, i) -+ kmemcheck_mark_initialized(sg_virt(s), s->length); -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ ents = ops->map_sg(dev, sg, nents, dir, attrs); -+ } else { -+ for_each_sg(sg, s, nents, i) { -+ struct page *page = sg_page(s); -+ -+ if (!plat_device_is_coherent(dev)) -+ __dma_sync(page, s->offset, s->length, dir); -+#ifdef CONFIG_NEED_SG_DMA_LENGTH -+ s->dma_length = s->length; -+#endif -+ s->dma_address = -+ plat_map_dma_mem_page(dev, page) + s->offset; -+ } -+ ents = nents; -+ } -+ BUG_ON(ents < 0); -+ debug_dma_map_sg(dev, sg, nents, ents, dir); -+ -+ return ents; -+} -+ -+static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg, -+ int nents, enum dma_data_direction dir, -+ struct dma_attrs *attrs) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ struct scatterlist *s; -+ int i; -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ debug_dma_unmap_sg(dev, sg, nents, dir); -+ if (ops) { -+ ops->unmap_sg(dev, sg, nents, dir, attrs); -+ return; -+ } -+ for_each_sg(sg, s, nents, i) { -+ if (!plat_device_is_coherent(dev) && dir != DMA_TO_DEVICE) -+ __dma_sync(sg_page(s), s->offset, s->length, dir); -+ plat_unmap_dma_mem(dev, s->dma_address, s->length, dir); -+ } -+} -+ -+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, -+ size_t offset, size_t size, -+ enum dma_data_direction dir) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ dma_addr_t addr; -+ -+ kmemcheck_mark_initialized(page_address(page) + offset, size); -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ addr = ops->map_page(dev, page, offset, size, dir, NULL); -+ } else { -+ if (!plat_device_is_coherent(dev)) -+ __dma_sync(page, offset, size, dir); -+ -+ addr = plat_map_dma_mem_page(dev, page) + offset; -+ } -+ debug_dma_map_page(dev, page, offset, size, dir, addr, false); -+ -+ return addr; -+} -+ -+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr, -+ size_t size, enum dma_data_direction dir) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ ops->unmap_page(dev, addr, size, dir, NULL); -+ } else { -+ if (cpu_needs_post_dma_flush(dev)) -+ __dma_sync(dma_addr_to_page(dev, addr), -+ addr & ~PAGE_MASK, size, dir); -+ plat_post_dma_flush(dev); -+ plat_unmap_dma_mem(dev, addr, size, dir); -+ } -+ debug_dma_unmap_page(dev, addr, size, dir, false); -+} -+ -+static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, -+ size_t size, -+ enum dma_data_direction dir) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ ops->sync_single_for_cpu(dev, addr, size, dir); -+ } else { -+ if (cpu_needs_post_dma_flush(dev)) -+ __dma_sync(dma_addr_to_page(dev, addr), -+ addr & ~PAGE_MASK, size, dir); -+ plat_post_dma_flush(dev); -+ } -+ debug_dma_sync_single_for_cpu(dev, addr, size, dir); -+} -+ -+static inline void dma_sync_single_for_device(struct device *dev, -+ dma_addr_t addr, size_t size, -+ enum dma_data_direction dir) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) -+ ops->sync_single_for_device(dev, addr, size, dir); -+ else if (!plat_device_is_coherent(dev)) -+ __dma_sync(dma_addr_to_page(dev, addr), -+ addr & ~PAGE_MASK, size, dir); -+ debug_dma_sync_single_for_device(dev, addr, size, dir); -+} -+ -+static inline void dma_sync_single_range_for_cpu(struct device *dev, -+ dma_addr_t addr, -+ unsigned long offset, -+ size_t size, -+ enum dma_data_direction dir) -+{ -+ const struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ ops->sync_single_for_cpu(dev, addr + offset, size, dir); -+ } else { -+ if (cpu_needs_post_dma_flush(dev)) -+ __dma_sync(dma_addr_to_page(dev, addr + offset), -+ (addr + offset) & ~PAGE_MASK, size, dir); -+ plat_post_dma_flush(dev); -+ } -+ -+ debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir); -+} -+ -+static inline void dma_sync_single_range_for_device(struct device *dev, -+ dma_addr_t addr, -+ unsigned long offset, -+ size_t size, -+ enum dma_data_direction dir) -+{ -+ const struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) -+ ops->sync_single_for_device(dev, addr + offset, size, dir); -+ else if (!plat_device_is_coherent(dev)) -+ __dma_sync(dma_addr_to_page(dev, addr + offset), -+ (addr + offset) & ~PAGE_MASK, size, dir); -+ debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir); -+} -+ -+static inline void -+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, -+ int nelems, enum dma_data_direction dir) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ struct scatterlist *s; -+ int i; -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ ops->sync_sg_for_cpu(dev, sg, nelems, dir); -+ } else if (cpu_needs_post_dma_flush(dev)) { -+ for_each_sg(sg, s, nelems, i) -+ __dma_sync(sg_page(s), s->offset, s->length, dir); -+ } -+ plat_post_dma_flush(dev); -+ debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir); -+} -+ -+static inline void -+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, -+ int nelems, enum dma_data_direction dir) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ struct scatterlist *s; -+ int i; -+ -+ BUG_ON(!valid_dma_direction(dir)); -+ if (ops) { -+ ops->sync_sg_for_device(dev, sg, nelems, dir); -+ } else if (!plat_device_is_coherent(dev)) { -+ for_each_sg(sg, s, nelems, i) -+ __dma_sync(sg_page(s), s->offset, s->length, dir); -+ } -+ debug_dma_sync_sg_for_device(dev, sg, nelems, dir); -+ -+} -+ -+#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL) -+#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, NULL) -+#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, NULL) -+#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, NULL) -+ -+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, -+ void *cpu_addr, dma_addr_t dma_addr, size_t size); -+ -+/** -+ * dma_mmap_attrs - map a coherent DMA allocation into user space -+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices -+ * @vma: vm_area_struct describing requested user mapping -+ * @cpu_addr: kernel CPU-view address returned from dma_alloc_attrs -+ * @handle: device-view address returned from dma_alloc_attrs -+ * @size: size of memory originally requested in dma_alloc_attrs -+ * @attrs: attributes of mapping properties requested in dma_alloc_attrs -+ * -+ * Map a coherent DMA buffer previously allocated by dma_alloc_attrs -+ * into user space. The coherent DMA buffer must not be freed by the -+ * driver until the user space mapping has been released. -+ */ -+static inline int -+dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, -+ dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ BUG_ON(!ops); -+ if (ops && ops->mmap) -+ return ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs); -+ return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size); -+} -+ -+#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, NULL) -+ -+int -+dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, -+ void *cpu_addr, dma_addr_t dma_addr, size_t size); -+ -+static inline int -+dma_get_sgtable_attrs(struct device *dev, struct sg_table *sgt, void *cpu_addr, -+ dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ BUG_ON(!ops); -+ if (ops && ops->get_sgtable) -+ return ops->get_sgtable(dev, sgt, cpu_addr, dma_addr, size, -+ attrs); -+ return dma_common_get_sgtable(dev, sgt, cpu_addr, dma_addr, size); -+} -+ -+#define dma_get_sgtable(d, t, v, h, s) dma_get_sgtable_attrs(d, t, v, h, s, NULL) -+ -+static inline int dma_supported(struct device *dev, u64 mask) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ if (ops) -+ return ops->dma_supported(dev, mask); -+ return plat_dma_supported(dev, mask); -+} -+ -+static inline int dma_mapping_error(struct device *dev, u64 mask) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ debug_dma_mapping_error(dev, mask); -+ if (ops) -+ return ops->mapping_error(dev, mask); -+ return 0; -+} -+ -+static inline int -+dma_set_mask(struct device *dev, u64 mask) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ if(!dev->dma_mask || !dma_supported(dev, mask)) -+ return -EIO; -+ -+ if (ops && ops->set_dma_mask) -+ return ops->set_dma_mask(dev, mask); -+ -+ *dev->dma_mask = mask; -+ -+ return 0; -+} - - extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction); - -+#define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL) -+ -+static inline void *dma_alloc_attrs(struct device *dev, size_t size, -+ dma_addr_t *dma_handle, gfp_t gfp, -+ struct dma_attrs *attrs) -+{ -+ void *ret; -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ if (ops) -+ ret = ops->alloc(dev, size, dma_handle, gfp, attrs); -+ else -+ ret = mips_dma_alloc_coherent(dev, size, dma_handle, gfp, -+ attrs); -+ -+ debug_dma_alloc_coherent(dev, size, *dma_handle, ret); -+ -+ return ret; -+} -+ -+#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL) -+ -+static inline void dma_free_attrs(struct device *dev, size_t size, -+ void *vaddr, dma_addr_t dma_handle, -+ struct dma_attrs *attrs) -+{ -+ struct dma_map_ops *ops = get_dma_ops(dev); -+ -+ if (ops) -+ ops->free(dev, size, vaddr, dma_handle, attrs); -+ else -+ mips_dma_free_coherent(dev, size, vaddr, dma_handle, attrs); -+ -+ debug_dma_free_coherent(dev, size, vaddr, dma_handle); -+} -+ -+static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, -+ dma_addr_t *dma_handle, gfp_t gfp) -+{ -+ DEFINE_DMA_ATTRS(attrs); -+ -+ dma_set_attr(DMA_ATTR_NON_CONSISTENT, &attrs); -+ return dma_alloc_attrs(dev, size, dma_handle, gfp, &attrs); -+} -+ -+static inline void dma_free_noncoherent(struct device *dev, size_t size, -+ void *cpu_addr, dma_addr_t dma_handle) -+{ -+ DEFINE_DMA_ATTRS(attrs); -+ -+ dma_set_attr(DMA_ATTR_NON_CONSISTENT, &attrs); -+ dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); -+} -+ -+ - #endif /* _ASM_DMA_MAPPING_H */ ---- a/arch/mips/mm/dma-default.c -+++ b/arch/mips/mm/dma-default.c -@@ -46,35 +46,6 @@ static int __init setnocoherentio(char * - early_param("nocoherentio", setnocoherentio); - #endif - --static inline struct page *dma_addr_to_page(struct device *dev, -- dma_addr_t dma_addr) --{ -- return pfn_to_page( -- plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT); --} -- --/* -- * The affected CPUs below in 'cpu_needs_post_dma_flush()' can -- * speculatively fill random cachelines with stale data at any time, -- * requiring an extra flush post-DMA. -- * -- * Warning on the terminology - Linux calls an uncached area coherent; -- * MIPS terminology calls memory areas with hardware maintained coherency -- * coherent. -- * -- * Note that the R14000 and R16000 should also be checked for in this -- * condition. However this function is only called on non-I/O-coherent -- * systems and only the R10000 and R12000 are used in such systems, the -- * SGI IP28 Indigo² rsp. SGI IP32 aka O2. -- */ --static inline int cpu_needs_post_dma_flush(struct device *dev) --{ -- return !plat_device_is_coherent(dev) && -- (boot_cpu_type() == CPU_R10000 || -- boot_cpu_type() == CPU_R12000 || -- boot_cpu_type() == CPU_BMIPS5000); --} -- - static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp) - { - gfp_t dma_flag; -@@ -129,7 +100,7 @@ static void *mips_dma_alloc_noncoherent( - return ret; - } - --static void *mips_dma_alloc_coherent(struct device *dev, size_t size, -+void *mips_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp, struct dma_attrs *attrs) - { - void *ret; -@@ -165,6 +136,7 @@ static void *mips_dma_alloc_coherent(str - - return ret; - } -+EXPORT_SYMBOL(mips_dma_alloc_coherent); - - - static void mips_dma_free_noncoherent(struct device *dev, size_t size, -@@ -174,7 +146,7 @@ static void mips_dma_free_noncoherent(st - free_pages((unsigned long) vaddr, get_order(size)); - } - --static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr, -+void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle, struct dma_attrs *attrs) - { - unsigned long addr = (unsigned long) vaddr; -@@ -196,40 +168,7 @@ static void mips_dma_free_coherent(struc - if (!dma_release_from_contiguous(dev, page, count)) - __free_pages(page, get_order(size)); - } -- --static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma, -- void *cpu_addr, dma_addr_t dma_addr, size_t size, -- struct dma_attrs *attrs) --{ -- unsigned long user_count = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; -- unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; -- unsigned long addr = (unsigned long)cpu_addr; -- unsigned long off = vma->vm_pgoff; -- unsigned long pfn; -- int ret = -ENXIO; -- -- if (!plat_device_is_coherent(dev) && !hw_coherentio) -- addr = CAC_ADDR(addr); -- -- pfn = page_to_pfn(virt_to_page((void *)addr)); -- -- if (dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs)) -- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -- else -- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -- -- if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret)) -- return ret; -- -- if (off < count && user_count <= (count - off)) { -- ret = remap_pfn_range(vma, vma->vm_start, -- pfn + off, -- user_count << PAGE_SHIFT, -- vma->vm_page_prot); -- } -- -- return ret; --} -+EXPORT_SYMBOL(mips_dma_free_coherent); - - static inline void __dma_sync_virtual(void *addr, size_t size, - enum dma_data_direction direction) -@@ -258,7 +197,7 @@ static inline void __dma_sync_virtual(vo - * If highmem is not configured then the bulk of this loop gets - * optimized out. - */ --static inline void __dma_sync(struct page *page, -+void __dma_sync(struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) - { - size_t left = size; -@@ -288,120 +227,7 @@ static inline void __dma_sync(struct pag - left -= len; - } while (left); - } -- --static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, -- size_t size, enum dma_data_direction direction, struct dma_attrs *attrs) --{ -- if (cpu_needs_post_dma_flush(dev)) -- __dma_sync(dma_addr_to_page(dev, dma_addr), -- dma_addr & ~PAGE_MASK, size, direction); -- plat_post_dma_flush(dev); -- plat_unmap_dma_mem(dev, dma_addr, size, direction); --} -- --static int mips_dma_map_sg(struct device *dev, struct scatterlist *sglist, -- int nents, enum dma_data_direction direction, struct dma_attrs *attrs) --{ -- int i; -- struct scatterlist *sg; -- -- for_each_sg(sglist, sg, nents, i) { -- if (!plat_device_is_coherent(dev)) -- __dma_sync(sg_page(sg), sg->offset, sg->length, -- direction); --#ifdef CONFIG_NEED_SG_DMA_LENGTH -- sg->dma_length = sg->length; --#endif -- sg->dma_address = plat_map_dma_mem_page(dev, sg_page(sg)) + -- sg->offset; -- } -- -- return nents; --} -- --static dma_addr_t mips_dma_map_page(struct device *dev, struct page *page, -- unsigned long offset, size_t size, enum dma_data_direction direction, -- struct dma_attrs *attrs) --{ -- if (!plat_device_is_coherent(dev)) -- __dma_sync(page, offset, size, direction); -- -- return plat_map_dma_mem_page(dev, page) + offset; --} -- --static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, -- int nhwentries, enum dma_data_direction direction, -- struct dma_attrs *attrs) --{ -- int i; -- struct scatterlist *sg; -- -- for_each_sg(sglist, sg, nhwentries, i) { -- if (!plat_device_is_coherent(dev) && -- direction != DMA_TO_DEVICE) -- __dma_sync(sg_page(sg), sg->offset, sg->length, -- direction); -- plat_unmap_dma_mem(dev, sg->dma_address, sg->length, direction); -- } --} -- --static void mips_dma_sync_single_for_cpu(struct device *dev, -- dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) --{ -- if (cpu_needs_post_dma_flush(dev)) -- __dma_sync(dma_addr_to_page(dev, dma_handle), -- dma_handle & ~PAGE_MASK, size, direction); -- plat_post_dma_flush(dev); --} -- --static void mips_dma_sync_single_for_device(struct device *dev, -- dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) --{ -- if (!plat_device_is_coherent(dev)) -- __dma_sync(dma_addr_to_page(dev, dma_handle), -- dma_handle & ~PAGE_MASK, size, direction); --} -- --static void mips_dma_sync_sg_for_cpu(struct device *dev, -- struct scatterlist *sglist, int nelems, -- enum dma_data_direction direction) --{ -- int i; -- struct scatterlist *sg; -- -- if (cpu_needs_post_dma_flush(dev)) { -- for_each_sg(sglist, sg, nelems, i) { -- __dma_sync(sg_page(sg), sg->offset, sg->length, -- direction); -- } -- } -- plat_post_dma_flush(dev); --} -- --static void mips_dma_sync_sg_for_device(struct device *dev, -- struct scatterlist *sglist, int nelems, -- enum dma_data_direction direction) --{ -- int i; -- struct scatterlist *sg; -- -- if (!plat_device_is_coherent(dev)) { -- for_each_sg(sglist, sg, nelems, i) { -- __dma_sync(sg_page(sg), sg->offset, sg->length, -- direction); -- } -- } --} -- --int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) --{ -- return 0; --} -- --int mips_dma_supported(struct device *dev, u64 mask) --{ -- return plat_dma_supported(dev, mask); --} -+EXPORT_SYMBOL(__dma_sync); - - void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -@@ -414,24 +240,10 @@ void dma_cache_sync(struct device *dev, - - EXPORT_SYMBOL(dma_cache_sync); - --static struct dma_map_ops mips_default_dma_map_ops = { -- .alloc = mips_dma_alloc_coherent, -- .free = mips_dma_free_coherent, -- .mmap = mips_dma_mmap, -- .map_page = mips_dma_map_page, -- .unmap_page = mips_dma_unmap_page, -- .map_sg = mips_dma_map_sg, -- .unmap_sg = mips_dma_unmap_sg, -- .sync_single_for_cpu = mips_dma_sync_single_for_cpu, -- .sync_single_for_device = mips_dma_sync_single_for_device, -- .sync_sg_for_cpu = mips_dma_sync_sg_for_cpu, -- .sync_sg_for_device = mips_dma_sync_sg_for_device, -- .mapping_error = mips_dma_mapping_error, -- .dma_supported = mips_dma_supported --}; -- --struct dma_map_ops *mips_dma_map_ops = &mips_default_dma_map_ops; -+#ifdef CONFIG_SYS_HAS_DMA_OPS -+struct dma_map_ops *mips_dma_map_ops = NULL; - EXPORT_SYMBOL(mips_dma_map_ops); -+#endif - - #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) - diff --git a/target/linux/generic/pending-4.4/140-mtd-part-add-generic-parsing-of-linux-part-probe.patch b/target/linux/generic/pending-4.4/140-mtd-part-add-generic-parsing-of-linux-part-probe.patch deleted file mode 100644 index e1b84ae52c..0000000000 --- a/target/linux/generic/pending-4.4/140-mtd-part-add-generic-parsing-of-linux-part-probe.patch +++ /dev/null @@ -1,183 +0,0 @@ -From 3e7056c3a369e9ef9ca804bc626b60ef6b62ee27 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 17 May 2015 18:48:38 +0200 -Subject: [PATCH 2/3] mtd: part: add generic parsing of linux,part-probe - -This moves the linux,part-probe device tree parsing code from -physmap_of.c to mtdpart.c. Now all drivers can use this feature by just -providing a reference to their device tree node in struct -mtd_part_parser_data. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - Documentation/devicetree/bindings/mtd/nand.txt | 16 +++++++++ - drivers/mtd/maps/physmap_of.c | 46 +------------------------- - drivers/mtd/mtdpart.c | 45 +++++++++++++++++++++++++ - 3 files changed, 62 insertions(+), 45 deletions(-) - ---- a/Documentation/devicetree/bindings/mtd/nand.txt -+++ b/Documentation/devicetree/bindings/mtd/nand.txt -@@ -12,6 +12,22 @@ - - nand-ecc-step-size: integer representing the number of data bytes - that are covered by a single ECC step. - -+- linux,part-probe: list of name as strings of the partition parser -+ which should be used to parse the partition table. -+ They will be tried in the specified ordering and -+ the next one will be used if the previous one -+ failed. -+ -+ Example: linux,part-probe = "cmdlinepart", "ofpart"; -+ -+ This is also the default value, which will be used -+ if this attribute is not specified. It could be -+ that the flash driver in use overwrote the default -+ value and uses some other default. -+ -+ Possible values are: bcm47xxpart, afs, ar7part, -+ ofoldpart, ofpart, bcm63xxpart, RedBoot, cmdlinepart -+ - The ECC strength and ECC step size properties define the correction capability - of a controller. Together, they say a controller can correct "{strength} bit - errors per {size} bytes". ---- a/drivers/mtd/maps/physmap_of.c -+++ b/drivers/mtd/maps/physmap_of.c -@@ -112,47 +112,9 @@ static struct mtd_info *obsolete_probe(s - static const char * const part_probe_types_def[] = { - "cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL }; - --static const char * const *of_get_probes(struct device_node *dp) --{ -- const char *cp; -- int cplen; -- unsigned int l; -- unsigned int count; -- const char **res; -- -- cp = of_get_property(dp, "linux,part-probe", &cplen); -- if (cp == NULL) -- return part_probe_types_def; -- -- count = 0; -- for (l = 0; l != cplen; l++) -- if (cp[l] == 0) -- count++; -- -- res = kzalloc((count + 1)*sizeof(*res), GFP_KERNEL); -- if (!res) -- return NULL; -- count = 0; -- while (cplen > 0) { -- res[count] = cp; -- l = strlen(cp) + 1; -- cp += l; -- cplen -= l; -- count++; -- } -- return res; --} -- --static void of_free_probes(const char * const *probes) --{ -- if (probes != part_probe_types_def) -- kfree(probes); --} -- - static const struct of_device_id of_flash_match[]; - static int of_flash_probe(struct platform_device *dev) - { -- const char * const *part_probe_types; - const struct of_device_id *match; - struct device_node *dp = dev->dev.of_node; - struct resource res; -@@ -311,14 +273,8 @@ static int of_flash_probe(struct platfor - goto err_out; - - ppdata.of_node = dp; -- part_probe_types = of_get_probes(dp); -- if (!part_probe_types) { -- err = -ENOMEM; -- goto err_out; -- } -- mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata, -+ mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata, - NULL, 0); -- of_free_probes(part_probe_types); - - kfree(mtd_list); - ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -29,6 +29,7 @@ - #include <linux/kmod.h> - #include <linux/mtd/mtd.h> - #include <linux/mtd/partitions.h> -+#include <linux/of.h> - #include <linux/err.h> - #include <linux/kconfig.h> - -@@ -721,6 +722,42 @@ void deregister_mtd_parser(struct mtd_pa - EXPORT_SYMBOL_GPL(deregister_mtd_parser); - - /* -+ * Parses the linux,part-probe device tree property. -+ * When a non null value is returned it has to be freed with kfree() by -+ * the caller. -+ */ -+static const char * const *of_get_probes(struct device_node *dp) -+{ -+ const char *cp; -+ int cplen; -+ unsigned int l; -+ unsigned int count; -+ const char **res; -+ -+ cp = of_get_property(dp, "linux,part-probe", &cplen); -+ if (cp == NULL) -+ return NULL; -+ -+ count = 0; -+ for (l = 0; l != cplen; l++) -+ if (cp[l] == 0) -+ count++; -+ -+ res = kzalloc((count + 1) * sizeof(*res), GFP_KERNEL); -+ if (!res) -+ return NULL; -+ count = 0; -+ while (cplen > 0) { -+ res[count] = cp; -+ l = strlen(cp) + 1; -+ cp += l; -+ cplen -= l; -+ count++; -+ } -+ return res; -+} -+ -+/* - * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you - * are changing this array! - */ -@@ -756,6 +793,13 @@ int parse_mtd_partitions(struct mtd_info - { - struct mtd_part_parser *parser; - int ret, err = 0; -+ const char *const *types_of = NULL; -+ -+ if (data && data->of_node) { -+ types_of = of_get_probes(data->of_node); -+ if (types_of != NULL) -+ types = types_of; -+ } - - if (!types) - types = default_mtd_part_types; -@@ -785,6 +829,7 @@ int parse_mtd_partitions(struct mtd_info - if (ret < 0 && !err) - err = ret; - } -+ kfree(types_of); - return err; - } - diff --git a/target/linux/generic/pending-4.4/150-mtd-spi-nor-add-support-for-ESMT_f25l32qa-and-ESMT_f.patch b/target/linux/generic/pending-4.4/150-mtd-spi-nor-add-support-for-ESMT_f25l32qa-and-ESMT_f.patch deleted file mode 100644 index d6e577be8c..0000000000 --- a/target/linux/generic/pending-4.4/150-mtd-spi-nor-add-support-for-ESMT_f25l32qa-and-ESMT_f.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: "L. D. Pinney" <ldpinney@gmail.com> -Date: Thu, 25 Aug 2016 13:07:56 -0500 -Subject: [PATCH] mtd: spi-nor: add support for ESMT_f25l32qa and ESMT_f25l64qa - -Add Support for the ESMT_F25L32QA and ESMT_F25L64QA -These are 4MB and 8MB SPI NOR Chips from Elite Semiconductor Memory Technology - -Signed-off-by: L. D. Pinney <ldpinney@gmail.com> ---- - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -689,6 +689,8 @@ static const struct flash_info spi_nor_i - - /* ESMT */ - { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, -+ { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K) }, -+ { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K) }, - - /* Everspin */ - { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, diff --git a/target/linux/generic/pending-4.4/160-usb-gadget-udc-net2280-add-usb2380-support.patch b/target/linux/generic/pending-4.4/160-usb-gadget-udc-net2280-add-usb2380-support.patch deleted file mode 100644 index 94f78102b7..0000000000 --- a/target/linux/generic/pending-4.4/160-usb-gadget-udc-net2280-add-usb2380-support.patch +++ /dev/null @@ -1,253 +0,0 @@ -From 5185c91385d73cdf79836eb8548e4726e43ae831 Mon Sep 17 00:00:00 2001 -From: Tim Harvey <tharvey@gateworks.com> -Date: Mon, 23 May 2016 06:58:41 -0700 -Subject: [PATCH] usb: gadget: net2280: add USB2380 support - -The PLX USB2380 is a PCIe version of the NET2280 and behaves more like the -USB338x but without the USB3.0 superspeed support. - -This was tested with g_ether, g_serial, g_mass_storage on a Gateworks -Ventana GW2383. - -Cc: Justin DeFields <justindefields@gmail.com> -Signed-off-by: Tim Harvey <tharvey@gateworks.com> -Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> ---- - drivers/usb/gadget/udc/Kconfig | 4 +++- - drivers/usb/gadget/udc/net2280.c | 51 +++++++++++++++++++++++----------------- - drivers/usb/gadget/udc/net2280.h | 1 + - 3 files changed, 34 insertions(+), 22 deletions(-) - ---- a/drivers/usb/gadget/udc/Kconfig -+++ b/drivers/usb/gadget/udc/Kconfig -@@ -298,7 +298,7 @@ config USB_NET2272_DMA - If unsure, say "N" here. The driver works fine in PIO mode. - - config USB_NET2280 -- tristate "NetChip 228x / PLX USB338x" -+ tristate "NetChip NET228x / PLX USB3x8x" - depends on PCI - help - NetChip 2280 / 2282 is a PCI based USB peripheral controller which -@@ -308,6 +308,8 @@ config USB_NET2280 - (for control transfers) and several endpoints with dedicated - functions. - -+ PLX 2380 is a PCIe version of the PLX 2380. -+ - PLX 3380 / 3382 is a PCIe based USB peripheral controller which - supports full, high speed USB 2.0 and super speed USB 3.0 - data transfers. ---- a/drivers/usb/gadget/udc/net2280.c -+++ b/drivers/usb/gadget/udc/net2280.c -@@ -211,7 +211,7 @@ net2280_enable(struct usb_ep *_ep, const - goto print_err; - } - -- if (dev->quirks & PLX_SUPERSPEED) { -+ if (dev->quirks & PLX_PCIE) { - if ((desc->bEndpointAddress & 0x0f) >= 0x0c) { - ret = -EDOM; - goto print_err; -@@ -245,7 +245,7 @@ net2280_enable(struct usb_ep *_ep, const - /* set type, direction, address; reset fifo counters */ - writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat); - -- if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) { -+ if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) { - tmp = readl(&ep->cfg->ep_cfg); - /* If USB ep number doesn't match hardware ep number */ - if ((tmp & 0xf) != usb_endpoint_num(desc)) { -@@ -316,7 +316,7 @@ net2280_enable(struct usb_ep *_ep, const - BIT(CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); - } - -- if (dev->quirks & PLX_SUPERSPEED) -+ if (dev->quirks & PLX_PCIE) - ep_clear_seqnum(ep); - writel(tmp, &ep->cfg->ep_cfg); - -@@ -527,7 +527,7 @@ static int net2280_disable(struct usb_ep - spin_lock_irqsave(&ep->dev->lock, flags); - nuke(ep); - -- if (ep->dev->quirks & PLX_SUPERSPEED) -+ if (ep->dev->quirks & PLX_PCIE) - ep_reset_338x(ep->dev->regs, ep); - else - ep_reset_228x(ep->dev->regs, ep); -@@ -862,7 +862,7 @@ static void start_queue(struct net2280_e - writel(readl(&dma->dmastat), &dma->dmastat); - - writel(td_dma, &dma->dmadesc); -- if (ep->dev->quirks & PLX_SUPERSPEED) -+ if (ep->dev->quirks & PLX_PCIE) - dmactl |= BIT(DMA_REQUEST_OUTSTANDING); - writel(dmactl, &dma->dmactl); - -@@ -1046,7 +1046,7 @@ net2280_queue(struct usb_ep *_ep, struct - - /* kickstart this i/o queue? */ - if (list_empty(&ep->queue) && !ep->stopped && -- !((dev->quirks & PLX_SUPERSPEED) && ep->dma && -+ !((dev->quirks & PLX_PCIE) && ep->dma && - (readl(&ep->regs->ep_rsp) & BIT(CLEAR_ENDPOINT_HALT)))) { - - /* use DMA if the endpoint supports it, else pio */ -@@ -1169,7 +1169,7 @@ static void scan_dma_completions(struct - break; - } else if (!ep->is_in && - (req->req.length % ep->ep.maxpacket) && -- !(ep->dev->quirks & PLX_SUPERSPEED)) { -+ !(ep->dev->quirks & PLX_PCIE)) { - - tmp = readl(&ep->regs->ep_stat); - /* AVOID TROUBLE HERE by not issuing short reads from -@@ -1367,7 +1367,7 @@ net2280_set_halt_and_wedge(struct usb_ep - ep->wedged = 1; - } else { - clear_halt(ep); -- if (ep->dev->quirks & PLX_SUPERSPEED && -+ if (ep->dev->quirks & PLX_PCIE && - !list_empty(&ep->queue) && ep->td_dma) - restart_dma(ep); - ep->wedged = 0; -@@ -2394,7 +2394,7 @@ static int net2280_start(struct usb_gadg - */ - net2280_led_active(dev, 1); - -- if ((dev->quirks & PLX_SUPERSPEED) && !dev->bug7734_patched) -+ if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched) - defect7374_enable_data_eps_zero(dev); - - ep0_start(dev); -@@ -3060,7 +3060,7 @@ static void handle_stat0_irqs(struct net - } - ep->stopped = 0; - dev->protocol_stall = 0; -- if (!(dev->quirks & PLX_SUPERSPEED)) { -+ if (!(dev->quirks & PLX_PCIE)) { - if (ep->dev->quirks & PLX_2280) - tmp = BIT(FIFO_OVERFLOW) | - BIT(FIFO_UNDERFLOW); -@@ -3087,7 +3087,7 @@ static void handle_stat0_irqs(struct net - cpu_to_le32s(&u.raw[0]); - cpu_to_le32s(&u.raw[1]); - -- if ((dev->quirks & PLX_SUPERSPEED) && !dev->bug7734_patched) -+ if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched) - defect7374_workaround(dev, u.r); - - tmp = 0; -@@ -3170,7 +3170,7 @@ static void handle_stat0_irqs(struct net - } else { - ep_vdbg(dev, "%s clear halt\n", e->ep.name); - clear_halt(e); -- if ((ep->dev->quirks & PLX_SUPERSPEED) && -+ if ((ep->dev->quirks & PLX_PCIE) && - !list_empty(&e->queue) && e->td_dma) - restart_dma(e); - } -@@ -3192,7 +3192,7 @@ static void handle_stat0_irqs(struct net - if (e->ep.name == ep0name) - goto do_stall; - set_halt(e); -- if ((dev->quirks & PLX_SUPERSPEED) && e->dma) -+ if ((dev->quirks & PLX_PCIE) && e->dma) - abort_dma(e); - allow_status(ep); - ep_vdbg(dev, "%s set halt\n", ep->ep.name); -@@ -3231,7 +3231,7 @@ do_stall: - #undef w_length - - next_endpoints: -- if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) { -+ if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) { - u32 mask = (BIT(ENDPOINT_0_INTERRUPT) | - USB3380_IRQSTAT0_EP_INTR_MASK_IN | - USB3380_IRQSTAT0_EP_INTR_MASK_OUT); -@@ -3392,7 +3392,7 @@ static void handle_stat1_irqs(struct net - writel(tmp, &dma->dmastat); - - /* dma sync*/ -- if (dev->quirks & PLX_SUPERSPEED) { -+ if (dev->quirks & PLX_PCIE) { - u32 r_dmacount = readl(&dma->dmacount); - if (!ep->is_in && (r_dmacount & 0x00FFFFFF) && - (tmp & BIT(DMA_TRANSACTION_DONE_INTERRUPT))) -@@ -3461,7 +3461,7 @@ static irqreturn_t net2280_irq(int irq, - /* control requests and PIO */ - handle_stat0_irqs(dev, readl(&dev->regs->irqstat0)); - -- if (dev->quirks & PLX_SUPERSPEED) { -+ if (dev->quirks & PLX_PCIE) { - /* re-enable interrupt to trigger any possible new interrupt */ - u32 pciirqenb1 = readl(&dev->regs->pciirqenb1); - writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1); -@@ -3506,7 +3506,7 @@ static void net2280_remove(struct pci_de - } - if (dev->got_irq) - free_irq(pdev->irq, dev); -- if (dev->quirks & PLX_SUPERSPEED) -+ if (dev->quirks & PLX_PCIE) - pci_disable_msi(pdev); - if (dev->regs) - iounmap(dev->regs); -@@ -3586,7 +3586,7 @@ static int net2280_probe(struct pci_dev - dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200); - dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300); - -- if (dev->quirks & PLX_SUPERSPEED) { -+ if (dev->quirks & PLX_PCIE) { - u32 fsmvalue; - u32 usbstat; - dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *) -@@ -3630,7 +3630,7 @@ static int net2280_probe(struct pci_dev - goto done; - } - -- if (dev->quirks & PLX_SUPERSPEED) -+ if (dev->quirks & PLX_PCIE) - if (pci_enable_msi(pdev)) - ep_err(dev, "Failed to enable MSI mode\n"); - -@@ -3748,10 +3748,19 @@ static const struct pci_device_id pci_id - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = PCI_VENDOR_ID_PLX, -+ .device = 0x2380, -+ .subvendor = PCI_ANY_ID, -+ .subdevice = PCI_ANY_ID, -+ .driver_data = PLX_PCIE, -+ }, -+ { -+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), -+ .class_mask = ~0, -+ .vendor = PCI_VENDOR_ID_PLX, - .device = 0x3380, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -- .driver_data = PLX_SUPERSPEED, -+ .driver_data = PLX_PCIE | PLX_SUPERSPEED, - }, - { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), -@@ -3760,7 +3769,7 @@ static const struct pci_device_id pci_id - .device = 0x3382, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -- .driver_data = PLX_SUPERSPEED, -+ .driver_data = PLX_PCIE | PLX_SUPERSPEED, - }, - { /* end: all zeroes */ } - }; ---- a/drivers/usb/gadget/udc/net2280.h -+++ b/drivers/usb/gadget/udc/net2280.h -@@ -47,6 +47,7 @@ set_idx_reg(struct net2280_regs __iomem - #define PLX_LEGACY BIT(0) - #define PLX_2280 BIT(1) - #define PLX_SUPERSPEED BIT(2) -+#define PLX_PCIE BIT(3) - - #define REG_DIAG 0x0 - #define RETRY_COUNTER 16 diff --git a/target/linux/generic/pending-4.4/180-Revert-bcma-init-serial-console-directly-from-ChipCo.patch b/target/linux/generic/pending-4.4/180-Revert-bcma-init-serial-console-directly-from-ChipCo.patch deleted file mode 100644 index affe090457..0000000000 --- a/target/linux/generic/pending-4.4/180-Revert-bcma-init-serial-console-directly-from-ChipCo.patch +++ /dev/null @@ -1,92 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] Revert "bcma: init serial console directly from ChipCommon - code" -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This reverts commit 4c81acab3816 ("bcma: init serial console directly -from ChipCommon code") as it broke IRQ assignment. Getting IRQ with -bcma_core_irq helper on SoC requires MIPS core to be set. It happens -*after* ChipCommon initialization so we can't do this so early. - -This fixes a user reported regression. It wasn't critical as serial was -still somehow working but lack of IRQs was making in unreliable. - -Fixes: 4c81acab3816 ("bcma: init serial console directly from ChipCommon code") -Reported-by: Felix Fietkau <nbd@nbd.name> -Cc: stable@vger.kernel.org # 4.6+ -Signed-off-by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> ---- - drivers/bcma/bcma_private.h | 3 +++ - drivers/bcma/driver_chipcommon.c | 11 +++-------- - drivers/bcma/driver_mips.c | 3 +++ - 3 files changed, 9 insertions(+), 8 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -45,6 +45,9 @@ int bcma_sprom_get(struct bcma_bus *bus) - void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); - void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); - void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+void bcma_chipco_serial_init(struct bcma_drv_cc *cc); -+#endif /* CONFIG_BCMA_DRIVER_MIPS */ - - /* driver_chipcommon_b.c */ - int bcma_core_chipcommon_b_init(struct bcma_drv_cc_b *ccb); ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -15,8 +15,6 @@ - #include <linux/platform_device.h> - #include <linux/bcma/bcma.h> - --static void bcma_chipco_serial_init(struct bcma_drv_cc *cc); -- - static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, - u32 mask, u32 value) - { -@@ -186,9 +184,6 @@ void bcma_core_chipcommon_early_init(str - if (cc->capabilities & BCMA_CC_CAP_PMU) - bcma_pmu_early_init(cc); - -- if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC) -- bcma_chipco_serial_init(cc); -- - if (bus->hosttype == BCMA_HOSTTYPE_SOC) - bcma_core_chipcommon_flash_detect(cc); - -@@ -378,9 +373,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcm - return res; - } - --static void bcma_chipco_serial_init(struct bcma_drv_cc *cc) -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+void bcma_chipco_serial_init(struct bcma_drv_cc *cc) - { --#if IS_BUILTIN(CONFIG_BCM47XX) - unsigned int irq; - u32 baud_base; - u32 i; -@@ -422,5 +417,5 @@ static void bcma_chipco_serial_init(stru - ports[i].baud_base = baud_base; - ports[i].reg_shift = 0; - } --#endif /* CONFIG_BCM47XX */ - } -+#endif /* CONFIG_BCMA_DRIVER_MIPS */ ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -278,9 +278,12 @@ static void bcma_core_mips_nvram_init(st - - void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) - { -+ struct bcma_bus *bus = mcore->core->bus; -+ - if (mcore->early_setup_done) - return; - -+ bcma_chipco_serial_init(&bus->drv_cc); - bcma_core_mips_nvram_init(mcore); - - mcore->early_setup_done = true; diff --git a/target/linux/generic/pending-4.4/200-fix_localversion.patch b/target/linux/generic/pending-4.4/200-fix_localversion.patch deleted file mode 100644 index 70228bb5f4..0000000000 --- a/target/linux/generic/pending-4.4/200-fix_localversion.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/scripts/setlocalversion -+++ b/scripts/setlocalversion -@@ -165,7 +165,7 @@ else - # annotated or signed tagged state (as git describe only - # looks at signed or annotated tags - git tag -a/-s) and - # LOCALVERSION= is not specified -- if test "${LOCALVERSION+set}" != "set"; then -+ if test "${CONFIG_LOCALVERSION+set}" != "set"; then - scm=$(scm_version --short) - res="$res${scm:++}" - fi diff --git a/target/linux/generic/pending-4.4/201-extra_optimization.patch b/target/linux/generic/pending-4.4/201-extra_optimization.patch deleted file mode 100644 index b4235a11d4..0000000000 --- a/target/linux/generic/pending-4.4/201-extra_optimization.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/Makefile -+++ b/Makefile -@@ -626,12 +626,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni - KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context) - - ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE --KBUILD_CFLAGS += -Os -+KBUILD_CFLAGS += -Os $(EXTRA_OPTIMIZATION) - else - ifdef CONFIG_PROFILE_ALL_BRANCHES --KBUILD_CFLAGS += -O2 -+KBUILD_CFLAGS += -O2 $(EXTRA_OPTIMIZATION) - else --KBUILD_CFLAGS += -O2 -+KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION) - endif - endif - diff --git a/target/linux/generic/pending-4.4/202-reduce_module_size.patch b/target/linux/generic/pending-4.4/202-reduce_module_size.patch deleted file mode 100644 index 1aabf3e722..0000000000 --- a/target/linux/generic/pending-4.4/202-reduce_module_size.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/Makefile -+++ b/Makefile -@@ -405,7 +405,7 @@ KBUILD_CFLAGS_KERNEL := - KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE) - KBUILD_AFLAGS_MODULE := -DMODULE - KBUILD_CFLAGS_MODULE := -DMODULE --KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds -+KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s) - - # Read KERNELRELEASE from include/config/kernel.release (if it exists) - KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) diff --git a/target/linux/generic/pending-4.4/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-4.4/203-kallsyms_uncompressed.patch deleted file mode 100644 index cf8a447bbc..0000000000 --- a/target/linux/generic/pending-4.4/203-kallsyms_uncompressed.patch +++ /dev/null @@ -1,108 +0,0 @@ ---- a/scripts/kallsyms.c -+++ b/scripts/kallsyms.c -@@ -58,6 +58,7 @@ static struct addr_range percpu_range = - static struct sym_entry *table; - static unsigned int table_size, table_cnt; - static int all_symbols = 0; -+static int uncompressed = 0; - static int absolute_percpu = 0; - static char symbol_prefix_char = '\0'; - static unsigned long long kernel_start_addr = 0; -@@ -403,6 +404,9 @@ static void write_src(void) - - free(markers); - -+ if (uncompressed) -+ return; -+ - output_label("kallsyms_token_table"); - off = 0; - for (i = 0; i < 256; i++) { -@@ -461,6 +465,9 @@ static void *find_token(unsigned char *s - { - int i; - -+ if (uncompressed) -+ return NULL; -+ - for (i = 0; i < len - 1; i++) { - if (str[i] == token[0] && str[i+1] == token[1]) - return &str[i]; -@@ -533,6 +540,9 @@ static void optimize_result(void) - { - int i, best; - -+ if (uncompressed) -+ return; -+ - /* using the '\0' symbol last allows compress_symbols to use standard - * fast string functions */ - for (i = 255; i >= 0; i--) { -@@ -703,7 +713,9 @@ int main(int argc, char **argv) - } else if (strncmp(argv[i], "--page-offset=", 14) == 0) { - const char *p = &argv[i][14]; - kernel_start_addr = strtoull(p, NULL, 16); -- } else -+ } else if (strcmp(argv[i], "--uncompressed") == 0) -+ uncompressed = 1; -+ else - usage(); - } - } else if (argc != 1) ---- a/init/Kconfig -+++ b/init/Kconfig -@@ -1345,6 +1345,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW - the unaligned access emulation. - see arch/parisc/kernel/unaligned.c for reference - -+config KALLSYMS_UNCOMPRESSED -+ bool "Keep kallsyms uncompressed" -+ depends on KALLSYMS -+ help -+ Normally kallsyms contains compressed symbols (using a token table), -+ reducing the uncompressed kernel image size. Keeping the symbol table -+ uncompressed significantly improves the size of this part in compressed -+ kernel images. -+ -+ Say N unless you need compressed kernel images to be small. -+ - config HAVE_PCSPKR_PLATFORM - bool - ---- a/scripts/link-vmlinux.sh -+++ b/scripts/link-vmlinux.sh -@@ -90,6 +90,10 @@ kallsyms() - kallsymopt="${kallsymopt} --absolute-percpu" - fi - -+ if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then -+ kallsymopt="${kallsymopt} --uncompressed" -+ fi -+ - local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \ - ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}" - ---- a/kernel/kallsyms.c -+++ b/kernel/kallsyms.c -@@ -109,6 +109,11 @@ static unsigned int kallsyms_expand_symb - * For every byte on the compressed symbol data, copy the table - * entry for that byte. - */ -+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED -+ memcpy(result, data + 1, len - 1); -+ result += len - 1; -+ len = 0; -+#endif - while (len) { - tptr = &kallsyms_token_table[kallsyms_token_index[*data]]; - data++; -@@ -141,6 +146,9 @@ tail: - */ - static char kallsyms_get_symbol_type(unsigned int off) - { -+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED -+ return kallsyms_names[off + 1]; -+#endif - /* - * Get just the first code, look it up in the token table, - * and return the first char from this token. diff --git a/target/linux/generic/pending-4.4/204-module_strip.patch b/target/linux/generic/pending-4.4/204-module_strip.patch deleted file mode 100644 index a661f98c65..0000000000 --- a/target/linux/generic/pending-4.4/204-module_strip.patch +++ /dev/null @@ -1,193 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: [PATCH] build: add a hack for removing non-essential module info - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/include/linux/module.h -+++ b/include/linux/module.h -@@ -169,6 +169,7 @@ void trim_init_extable(struct module *m) - - /* Generic info of form tag = "info" */ - #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info) -+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info) - - /* For userspace: you can also call me... */ - #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias) -@@ -212,12 +213,12 @@ void trim_init_extable(struct module *m) - * Author(s), use "Name <email>" or just "Name", for multiple - * authors use multiple MODULE_AUTHOR() statements/lines. - */ --#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author) -+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author) - - /* What your module does. */ --#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description) -+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description) - --#ifdef MODULE -+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED) - /* Creates an alias so file2alias.c can find device table. */ - #define MODULE_DEVICE_TABLE(type, name) \ - extern const typeof(name) __mod_##type##__##name##_device_table \ -@@ -244,7 +245,9 @@ extern const typeof(name) __mod_##type## - */ - - #if defined(MODULE) || !defined(CONFIG_SYSFS) --#define MODULE_VERSION(_version) MODULE_INFO(version, _version) -+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version) -+#elif defined(CONFIG_MODULE_STRIPPED) -+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version) - #else - #define MODULE_VERSION(_version) \ - static struct module_version_attribute ___modver_attr = { \ -@@ -266,7 +269,7 @@ extern const typeof(name) __mod_##type## - /* Optional firmware file (or files) needed by the module - * format is simply firmware file name. Multiple firmware - * files require multiple MODULE_FIRMWARE() specifiers */ --#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware) -+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware) - - /* Given an address, look for it in the exception tables */ - const struct exception_table_entry *search_exception_tables(unsigned long add); ---- a/include/linux/moduleparam.h -+++ b/include/linux/moduleparam.h -@@ -16,6 +16,16 @@ - /* Chosen so that structs with an unsigned long line up. */ - #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long)) - -+/* This struct is here for syntactic coherency, it is not used */ -+#define __MODULE_INFO_DISABLED(name) \ -+ struct __UNIQUE_ID(name) {} -+ -+#ifdef CONFIG_MODULE_STRIPPED -+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name) -+#else -+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info) -+#endif -+ - #ifdef MODULE - #define __MODULE_INFO(tag, name, info) \ - static const char __UNIQUE_ID(name)[] \ -@@ -23,8 +33,7 @@ static const char __UNIQUE_ID(name)[] - = __stringify(tag) "=" info - #else /* !MODULE */ - /* This struct is here for syntactic coherency, it is not used */ --#define __MODULE_INFO(tag, name, info) \ -- struct __UNIQUE_ID(name) {} -+#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name) - #endif - #define __MODULE_PARM_TYPE(name, _type) \ - __MODULE_INFO(parmtype, name##type, #name ":" _type) -@@ -32,7 +41,7 @@ static const char __UNIQUE_ID(name)[] - /* One for each parameter, describing how to use it. Some files do - multiple of these per line, so can't just use MODULE_INFO. */ - #define MODULE_PARM_DESC(_parm, desc) \ -- __MODULE_INFO(parm, _parm, #_parm ":" desc) -+ __MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc) - - struct kernel_param; - ---- a/init/Kconfig -+++ b/init/Kconfig -@@ -2033,6 +2033,13 @@ config MODULE_COMPRESS_XZ - - endchoice - -+config MODULE_STRIPPED -+ bool "Reduce module size" -+ depends on MODULES -+ help -+ Remove module parameter descriptions, author info, version, aliases, -+ device tables, etc. -+ - endif # MODULES - - config MODULES_TREE_LOOKUP ---- a/kernel/module.c -+++ b/kernel/module.c -@@ -2880,6 +2880,7 @@ static void check_modinfo_retpoline(stru - - static int check_modinfo(struct module *mod, struct load_info *info, int flags) - { -+#ifndef CONFIG_MODULE_STRIPPED - const char *modmagic = get_modinfo(info, "vermagic"); - int err; - -@@ -2911,6 +2912,7 @@ static int check_modinfo(struct module * - pr_warn("%s: module is from the staging directory, the quality " - "is unknown, you have been warned.\n", mod->name); - } -+#endif - - /* Set up license info based on the info section */ - set_license(mod, get_modinfo(info, "license")); ---- a/scripts/mod/modpost.c -+++ b/scripts/mod/modpost.c -@@ -1964,7 +1964,9 @@ static void read_symbols(char *modname) - symname = remove_dot(info.strtab + sym->st_name); - - handle_modversions(mod, &info, sym, symname); -+#ifndef CONFIG_MODULE_STRIPPED - handle_moddevtable(mod, &info, sym, symname); -+#endif - } - if (!is_vmlinux(modname) || - (is_vmlinux(modname) && vmlinux_section_warnings)) -@@ -2108,7 +2110,9 @@ static void add_header(struct buffer *b, - buf_printf(b, "#include <linux/vermagic.h>\n"); - buf_printf(b, "#include <linux/compiler.h>\n"); - buf_printf(b, "\n"); -+#ifndef CONFIG_MODULE_STRIPPED - buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n"); -+#endif - buf_printf(b, "\n"); - buf_printf(b, "__visible struct module __this_module\n"); - buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n"); -@@ -2125,8 +2129,10 @@ static void add_header(struct buffer *b, - - static void add_intree_flag(struct buffer *b, int is_intree) - { -+#ifndef CONFIG_MODULE_STRIPPED - if (is_intree) - buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n"); -+#endif - } - - /* Cannot check for assembler */ -@@ -2139,10 +2145,12 @@ static void add_retpoline(struct buffer - - static void add_staging_flag(struct buffer *b, const char *name) - { -+#ifndef CONFIG_MODULE_STRIPPED - static const char *staging_dir = "drivers/staging"; - - if (strncmp(staging_dir, name, strlen(staging_dir)) == 0) - buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n"); -+#endif - } - - /* In kernel, this size is defined in linux/module.h; -@@ -2246,11 +2254,13 @@ static void add_depends(struct buffer *b - - static void add_srcversion(struct buffer *b, struct module *mod) - { -+#ifndef CONFIG_MODULE_STRIPPED - if (mod->srcversion[0]) { - buf_printf(b, "\n"); - buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n", - mod->srcversion); - } -+#endif - } - - static void write_if_changed(struct buffer *b, const char *fname) -@@ -2485,7 +2495,9 @@ int main(int argc, char **argv) - add_staging_flag(&buf, mod->name); - err |= add_versions(&buf, mod); - add_depends(&buf, mod, modules); -+#ifndef CONFIG_MODULE_STRIPPED - add_moddevtable(&buf, mod); -+#endif - add_srcversion(&buf, mod); - - sprintf(fname, "%s.mod.c", mod->name); diff --git a/target/linux/generic/pending-4.4/205-backtrace_module_info.patch b/target/linux/generic/pending-4.4/205-backtrace_module_info.patch deleted file mode 100644 index 0550ec4399..0000000000 --- a/target/linux/generic/pending-4.4/205-backtrace_module_info.patch +++ /dev/null @@ -1,36 +0,0 @@ ---- a/lib/vsprintf.c -+++ b/lib/vsprintf.c -@@ -618,8 +618,10 @@ char *symbol_string(char *buf, char *end - struct printf_spec spec, const char *fmt) - { - unsigned long value; --#ifdef CONFIG_KALLSYMS - char sym[KSYM_SYMBOL_LEN]; -+#ifndef CONFIG_KALLSYMS -+ struct module *mod; -+ int len; - #endif - - if (fmt[1] == 'R') -@@ -633,15 +635,15 @@ char *symbol_string(char *buf, char *end - sprint_symbol(sym, value); - else - sprint_symbol_no_offset(sym, value); -- -- return string(buf, end, sym, spec); - #else -- spec.field_width = 2 * sizeof(void *); -- spec.flags |= SPECIAL | SMALL | ZEROPAD; -- spec.base = 16; -+ len = snprintf(sym, sizeof(sym), "0x%lx", value); - -- return number(buf, end, value, spec); -+ mod = __module_address(value); -+ if (mod) -+ snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]", -+ mod->name, mod->module_core, mod->core_size); - #endif -+ return string(buf, end, sym, spec); - } - - static noinline_for_stack diff --git a/target/linux/generic/pending-4.4/206-mips-disable-vdso.patch b/target/linux/generic/pending-4.4/206-mips-disable-vdso.patch deleted file mode 100644 index 51b1d041bf..0000000000 --- a/target/linux/generic/pending-4.4/206-mips-disable-vdso.patch +++ /dev/null @@ -1,21 +0,0 @@ -Disable MIPS VDSO until the cache issues have been sorted out. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/arch/mips/vdso/Makefile -+++ b/arch/mips/vdso/Makefile -@@ -28,11 +28,11 @@ aflags-vdso := $(ccflags-vdso) \ - # the comments on that file. - # - ifndef CONFIG_CPU_MIPSR6 -- ifeq ($(call ld-ifversion, -lt, 22500000, y),y) -- $(warning MIPS VDSO requires binutils >= 2.25) -+# ifeq ($(call ld-ifversion, -lt, 22500000, y),y) -+# $(warning MIPS VDSO requires binutils >= 2.25) - obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y)) - ccflags-vdso += -DDISABLE_MIPS_VDSO -- endif -+# endif - endif - - # VDSO linker flags. diff --git a/target/linux/generic/pending-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch b/target/linux/generic/pending-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch deleted file mode 100644 index cfcd0b33a0..0000000000 --- a/target/linux/generic/pending-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/vdso/Makefile -+++ b/arch/mips/vdso/Makefile -@@ -77,7 +77,7 @@ $(obj-vdso): KBUILD_AFLAGS := $(aflags-v - - $(obj)/vdso.lds: KBUILD_CPPFLAGS := $(ccflags-vdso) $(native-abi) - --$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE -+$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) $(obj)/genvdso FORCE - $(call if_changed,vdsold) - - $(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE -@@ -111,7 +111,7 @@ $(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := - $(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE - $(call if_changed_dep,cpp_lds_S) - --$(obj)/vdso-o32.so.dbg: $(obj)/vdso-o32.lds $(obj-vdso-o32) FORCE -+$(obj)/vdso-o32.so.dbg: $(obj)/vdso-o32.lds $(obj-vdso-o32) $(obj)/genvdso FORCE - $(call if_changed,vdsold) - - $(obj)/vdso-o32-image.c: VDSO_NAME := o32 -@@ -147,7 +147,7 @@ $(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := - $(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE - $(call if_changed_dep,cpp_lds_S) - --$(obj)/vdso-n32.so.dbg: $(obj)/vdso-n32.lds $(obj-vdso-n32) FORCE -+$(obj)/vdso-n32.so.dbg: $(obj)/vdso-n32.lds $(obj-vdso-n32) $(obj)/genvdso FORCE - $(call if_changed,vdsold) - - $(obj)/vdso-n32-image.c: VDSO_NAME := n32 diff --git a/target/linux/generic/pending-4.4/208-disable-modorder.patch b/target/linux/generic/pending-4.4/208-disable-modorder.patch deleted file mode 100644 index 1707d520be..0000000000 --- a/target/linux/generic/pending-4.4/208-disable-modorder.patch +++ /dev/null @@ -1,34 +0,0 @@ -Disable modules.order to improve build performance. -This file is not needed for anything in LEDE - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/Makefile -+++ b/Makefile -@@ -1123,7 +1123,6 @@ all: modules - - PHONY += modules - modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin -- $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order - @$(kecho) ' Building modules, stage 2.'; - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild -@@ -1153,7 +1152,6 @@ _modinst_: - rm -f $(MODLIB)/build ; \ - ln -s $(CURDIR) $(MODLIB)/build ; \ - fi -- @cp -f $(objtree)/modules.order $(MODLIB)/ - @cp -f $(objtree)/modules.builtin $(MODLIB)/ - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst - ---- a/scripts/Makefile.build -+++ b/scripts/Makefile.build -@@ -92,7 +92,7 @@ modorder-target := $(obj)/modules.order - # We keep a list of all modules in $(MODVERDIR) - - __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ -- $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \ -+ $(if $(KBUILD_MODULES),$(obj-m)) \ - $(subdir-ym) $(always) - @: - diff --git a/target/linux/generic/pending-4.4/210-darwin_scripts_include.patch b/target/linux/generic/pending-4.4/210-darwin_scripts_include.patch deleted file mode 100644 index 2afeb23b52..0000000000 --- a/target/linux/generic/pending-4.4/210-darwin_scripts_include.patch +++ /dev/null @@ -1,3088 +0,0 @@ ---- a/scripts/kallsyms.c -+++ b/scripts/kallsyms.c -@@ -22,6 +22,35 @@ - #include <stdlib.h> - #include <string.h> - #include <ctype.h> -+#ifdef __APPLE__ -+/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */ -+void *memmem (const void *haystack, size_t haystack_len, -+ const void *needle, size_t needle_len) -+{ -+ const char *begin; -+ const char *const last_possible -+ = (const char *) haystack + haystack_len - needle_len; -+ -+ if (needle_len == 0) -+ /* The first occurrence of the empty string is deemed to occur at -+ the beginning of the string. */ -+ return (void *) haystack; -+ -+ /* Sanity check, otherwise the loop might search through the whole -+ memory. */ -+ if (__builtin_expect (haystack_len < needle_len, 0)) -+ return NULL; -+ -+ for (begin = (const char *) haystack; begin <= last_possible; ++begin) -+ if (begin[0] == ((const char *) needle)[0] && -+ !memcmp ((const void *) &begin[1], -+ (const void *) ((const char *) needle + 1), -+ needle_len - 1)) -+ return (void *) begin; -+ -+ return NULL; -+} -+#endif - - #ifndef ARRAY_SIZE - #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0])) ---- a/scripts/kconfig/Makefile -+++ b/scripts/kconfig/Makefile -@@ -161,6 +161,9 @@ check-lxdialog := $(srctree)/$(src)/lxd - # we really need to do so. (Do not call gcc as part of make mrproper) - HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ - -DLOCALE -+ifeq ($(shell uname -s),Darwin) -+HOST_LOADLIBES += -lncurses -+endif - - # =========================================================================== - # Shared Makefile for the various kconfig executables: ---- a/scripts/mod/mk_elfconfig.c -+++ b/scripts/mod/mk_elfconfig.c -@@ -1,7 +1,11 @@ - #include <stdio.h> - #include <stdlib.h> - #include <string.h> -+#ifndef __APPLE__ - #include <elf.h> -+#else -+#include "elf.h" -+#endif - - int - main(int argc, char **argv) ---- a/scripts/mod/modpost.h -+++ b/scripts/mod/modpost.h -@@ -7,7 +7,11 @@ - #include <sys/mman.h> - #include <fcntl.h> - #include <unistd.h> -+#if !(defined(__APPLE__) || defined(__CYGWIN__)) - #include <elf.h> -+#else -+#include "elf.h" -+#endif - - #include "elfconfig.h" - ---- /dev/null -+++ b/scripts/mod/elf.h -@@ -0,0 +1,3007 @@ -+/* This file defines standard ELF types, structures, and macros. -+ Copyright (C) 1995-2012 Free Software Foundation, Inc. -+ This file is part of the GNU C Library. -+ -+ The GNU C Library is free software; you can redistribute it and/or -+ modify it under the terms of the GNU Lesser General Public -+ License as published by the Free Software Foundation; either -+ version 2.1 of the License, or (at your option) any later version. -+ -+ The GNU C Library is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ Lesser General Public License for more details. -+ -+ You should have received a copy of the GNU Lesser General Public -+ License along with the GNU C Library; if not, see -+ <http://www.gnu.org/licenses/>. */ -+ -+#ifndef _ELF_H -+#define _ELF_H 1 -+ -+/* Standard ELF types. */ -+ -+#include <stdint.h> -+ -+/* Type for a 16-bit quantity. */ -+typedef uint16_t Elf32_Half; -+typedef uint16_t Elf64_Half; -+ -+/* Types for signed and unsigned 32-bit quantities. */ -+typedef uint32_t Elf32_Word; -+typedef int32_t Elf32_Sword; -+typedef uint32_t Elf64_Word; -+typedef int32_t Elf64_Sword; -+ -+/* Types for signed and unsigned 64-bit quantities. */ -+typedef uint64_t Elf32_Xword; -+typedef int64_t Elf32_Sxword; -+typedef uint64_t Elf64_Xword; -+typedef int64_t Elf64_Sxword; -+ -+/* Type of addresses. */ -+typedef uint32_t Elf32_Addr; -+typedef uint64_t Elf64_Addr; -+ -+/* Type of file offsets. */ -+typedef uint32_t Elf32_Off; -+typedef uint64_t Elf64_Off; -+ -+/* Type for section indices, which are 16-bit quantities. */ -+typedef uint16_t Elf32_Section; -+typedef uint16_t Elf64_Section; -+ -+/* Type for version symbol information. */ -+typedef Elf32_Half Elf32_Versym; -+typedef Elf64_Half Elf64_Versym; -+ -+ -+/* The ELF file header. This appears at the start of every ELF file. */ -+ -+#define EI_NIDENT (16) -+ -+typedef struct -+{ -+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */ -+ Elf32_Half e_type; /* Object file type */ -+ Elf32_Half e_machine; /* Architecture */ -+ Elf32_Word e_version; /* Object file version */ -+ Elf32_Addr e_entry; /* Entry point virtual address */ -+ Elf32_Off e_phoff; /* Program header table file offset */ -+ Elf32_Off e_shoff; /* Section header table file offset */ -+ Elf32_Word e_flags; /* Processor-specific flags */ -+ Elf32_Half e_ehsize; /* ELF header size in bytes */ -+ Elf32_Half e_phentsize; /* Program header table entry size */ -+ Elf32_Half e_phnum; /* Program header table entry count */ -+ Elf32_Half e_shentsize; /* Section header table entry size */ -+ Elf32_Half e_shnum; /* Section header table entry count */ -+ Elf32_Half e_shstrndx; /* Section header string table index */ -+} Elf32_Ehdr; -+ -+typedef struct -+{ -+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */ -+ Elf64_Half e_type; /* Object file type */ -+ Elf64_Half e_machine; /* Architecture */ -+ Elf64_Word e_version; /* Object file version */ -+ Elf64_Addr e_entry; /* Entry point virtual address */ -+ Elf64_Off e_phoff; /* Program header table file offset */ -+ Elf64_Off e_shoff; /* Section header table file offset */ -+ Elf64_Word e_flags; /* Processor-specific flags */ -+ Elf64_Half e_ehsize; /* ELF header size in bytes */ -+ Elf64_Half e_phentsize; /* Program header table entry size */ -+ Elf64_Half e_phnum; /* Program header table entry count */ -+ Elf64_Half e_shentsize; /* Section header table entry size */ -+ Elf64_Half e_shnum; /* Section header table entry count */ -+ Elf64_Half e_shstrndx; /* Section header string table index */ -+} Elf64_Ehdr; -+ -+/* Fields in the e_ident array. The EI_* macros are indices into the -+ array. The macros under each EI_* macro are the values the byte -+ may have. */ -+ -+#define EI_MAG0 0 /* File identification byte 0 index */ -+#define ELFMAG0 0x7f /* Magic number byte 0 */ -+ -+#define EI_MAG1 1 /* File identification byte 1 index */ -+#define ELFMAG1 'E' /* Magic number byte 1 */ -+ -+#define EI_MAG2 2 /* File identification byte 2 index */ -+#define ELFMAG2 'L' /* Magic number byte 2 */ -+ -+#define EI_MAG3 3 /* File identification byte 3 index */ -+#define ELFMAG3 'F' /* Magic number byte 3 */ -+ -+/* Conglomeration of the identification bytes, for easy testing as a word. */ -+#define ELFMAG "\177ELF" -+#define SELFMAG 4 -+ -+#define EI_CLASS 4 /* File class byte index */ -+#define ELFCLASSNONE 0 /* Invalid class */ -+#define ELFCLASS32 1 /* 32-bit objects */ -+#define ELFCLASS64 2 /* 64-bit objects */ -+#define ELFCLASSNUM 3 -+ -+#define EI_DATA 5 /* Data encoding byte index */ -+#define ELFDATANONE 0 /* Invalid data encoding */ -+#define ELFDATA2LSB 1 /* 2's complement, little endian */ -+#define ELFDATA2MSB 2 /* 2's complement, big endian */ -+#define ELFDATANUM 3 -+ -+#define EI_VERSION 6 /* File version byte index */ -+ /* Value must be EV_CURRENT */ -+ -+#define EI_OSABI 7 /* OS ABI identification */ -+#define ELFOSABI_NONE 0 /* UNIX System V ABI */ -+#define ELFOSABI_SYSV 0 /* Alias. */ -+#define ELFOSABI_HPUX 1 /* HP-UX */ -+#define ELFOSABI_NETBSD 2 /* NetBSD. */ -+#define ELFOSABI_GNU 3 /* Object uses GNU ELF extensions. */ -+#define ELFOSABI_LINUX ELFOSABI_GNU /* Compatibility alias. */ -+#define ELFOSABI_SOLARIS 6 /* Sun Solaris. */ -+#define ELFOSABI_AIX 7 /* IBM AIX. */ -+#define ELFOSABI_IRIX 8 /* SGI Irix. */ -+#define ELFOSABI_FREEBSD 9 /* FreeBSD. */ -+#define ELFOSABI_TRU64 10 /* Compaq TRU64 UNIX. */ -+#define ELFOSABI_MODESTO 11 /* Novell Modesto. */ -+#define ELFOSABI_OPENBSD 12 /* OpenBSD. */ -+#define ELFOSABI_ARM_AEABI 64 /* ARM EABI */ -+#define ELFOSABI_ARM 97 /* ARM */ -+#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */ -+ -+#define EI_ABIVERSION 8 /* ABI version */ -+ -+#define EI_PAD 9 /* Byte index of padding bytes */ -+ -+/* Legal values for e_type (object file type). */ -+ -+#define ET_NONE 0 /* No file type */ -+#define ET_REL 1 /* Relocatable file */ -+#define ET_EXEC 2 /* Executable file */ -+#define ET_DYN 3 /* Shared object file */ -+#define ET_CORE 4 /* Core file */ -+#define ET_NUM 5 /* Number of defined types */ -+#define ET_LOOS 0xfe00 /* OS-specific range start */ -+#define ET_HIOS 0xfeff /* OS-specific range end */ -+#define ET_LOPROC 0xff00 /* Processor-specific range start */ -+#define ET_HIPROC 0xffff /* Processor-specific range end */ -+ -+/* Legal values for e_machine (architecture). */ -+ -+#define EM_NONE 0 /* No machine */ -+#define EM_M32 1 /* AT&T WE 32100 */ -+#define EM_SPARC 2 /* SUN SPARC */ -+#define EM_386 3 /* Intel 80386 */ -+#define EM_68K 4 /* Motorola m68k family */ -+#define EM_88K 5 /* Motorola m88k family */ -+#define EM_860 7 /* Intel 80860 */ -+#define EM_MIPS 8 /* MIPS R3000 big-endian */ -+#define EM_S370 9 /* IBM System/370 */ -+#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */ -+ -+#define EM_PARISC 15 /* HPPA */ -+#define EM_VPP500 17 /* Fujitsu VPP500 */ -+#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ -+#define EM_960 19 /* Intel 80960 */ -+#define EM_PPC 20 /* PowerPC */ -+#define EM_PPC64 21 /* PowerPC 64-bit */ -+#define EM_S390 22 /* IBM S390 */ -+ -+#define EM_V800 36 /* NEC V800 series */ -+#define EM_FR20 37 /* Fujitsu FR20 */ -+#define EM_RH32 38 /* TRW RH-32 */ -+#define EM_RCE 39 /* Motorola RCE */ -+#define EM_ARM 40 /* ARM */ -+#define EM_FAKE_ALPHA 41 /* Digital Alpha */ -+#define EM_SH 42 /* Hitachi SH */ -+#define EM_SPARCV9 43 /* SPARC v9 64-bit */ -+#define EM_TRICORE 44 /* Siemens Tricore */ -+#define EM_ARC 45 /* Argonaut RISC Core */ -+#define EM_H8_300 46 /* Hitachi H8/300 */ -+#define EM_H8_300H 47 /* Hitachi H8/300H */ -+#define EM_H8S 48 /* Hitachi H8S */ -+#define EM_H8_500 49 /* Hitachi H8/500 */ -+#define EM_IA_64 50 /* Intel Merced */ -+#define EM_MIPS_X 51 /* Stanford MIPS-X */ -+#define EM_COLDFIRE 52 /* Motorola Coldfire */ -+#define EM_68HC12 53 /* Motorola M68HC12 */ -+#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/ -+#define EM_PCP 55 /* Siemens PCP */ -+#define EM_NCPU 56 /* Sony nCPU embeeded RISC */ -+#define EM_NDR1 57 /* Denso NDR1 microprocessor */ -+#define EM_STARCORE 58 /* Motorola Start*Core processor */ -+#define EM_ME16 59 /* Toyota ME16 processor */ -+#define EM_ST100 60 /* STMicroelectronic ST100 processor */ -+#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/ -+#define EM_X86_64 62 /* AMD x86-64 architecture */ -+#define EM_PDSP 63 /* Sony DSP Processor */ -+ -+#define EM_FX66 66 /* Siemens FX66 microcontroller */ -+#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */ -+#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */ -+#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */ -+#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */ -+#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */ -+#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */ -+#define EM_SVX 73 /* Silicon Graphics SVx */ -+#define EM_ST19 74 /* STMicroelectronics ST19 8 bit mc */ -+#define EM_VAX 75 /* Digital VAX */ -+#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ -+#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */ -+#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */ -+#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */ -+#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */ -+#define EM_HUANY 81 /* Harvard University machine-independent object files */ -+#define EM_PRISM 82 /* SiTera Prism */ -+#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */ -+#define EM_FR30 84 /* Fujitsu FR30 */ -+#define EM_D10V 85 /* Mitsubishi D10V */ -+#define EM_D30V 86 /* Mitsubishi D30V */ -+#define EM_V850 87 /* NEC v850 */ -+#define EM_M32R 88 /* Mitsubishi M32R */ -+#define EM_MN10300 89 /* Matsushita MN10300 */ -+#define EM_MN10200 90 /* Matsushita MN10200 */ -+#define EM_PJ 91 /* picoJava */ -+#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ -+#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */ -+#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ -+#define EM_TILEPRO 188 /* Tilera TILEPro */ -+#define EM_TILEGX 191 /* Tilera TILE-Gx */ -+#define EM_NUM 192 -+ -+/* If it is necessary to assign new unofficial EM_* values, please -+ pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the -+ chances of collision with official or non-GNU unofficial values. */ -+ -+#define EM_ALPHA 0x9026 -+ -+/* Legal values for e_version (version). */ -+ -+#define EV_NONE 0 /* Invalid ELF version */ -+#define EV_CURRENT 1 /* Current version */ -+#define EV_NUM 2 -+ -+/* Section header. */ -+ -+typedef struct -+{ -+ Elf32_Word sh_name; /* Section name (string tbl index) */ -+ Elf32_Word sh_type; /* Section type */ -+ Elf32_Word sh_flags; /* Section flags */ -+ Elf32_Addr sh_addr; /* Section virtual addr at execution */ -+ Elf32_Off sh_offset; /* Section file offset */ -+ Elf32_Word sh_size; /* Section size in bytes */ -+ Elf32_Word sh_link; /* Link to another section */ -+ Elf32_Word sh_info; /* Additional section information */ -+ Elf32_Word sh_addralign; /* Section alignment */ -+ Elf32_Word sh_entsize; /* Entry size if section holds table */ -+} Elf32_Shdr; -+ -+typedef struct -+{ -+ Elf64_Word sh_name; /* Section name (string tbl index) */ -+ Elf64_Word sh_type; /* Section type */ -+ Elf64_Xword sh_flags; /* Section flags */ -+ Elf64_Addr sh_addr; /* Section virtual addr at execution */ -+ Elf64_Off sh_offset; /* Section file offset */ -+ Elf64_Xword sh_size; /* Section size in bytes */ -+ Elf64_Word sh_link; /* Link to another section */ -+ Elf64_Word sh_info; /* Additional section information */ -+ Elf64_Xword sh_addralign; /* Section alignment */ -+ Elf64_Xword sh_entsize; /* Entry size if section holds table */ -+} Elf64_Shdr; -+ -+/* Special section indices. */ -+ -+#define SHN_UNDEF 0 /* Undefined section */ -+#define SHN_LORESERVE 0xff00 /* Start of reserved indices */ -+#define SHN_LOPROC 0xff00 /* Start of processor-specific */ -+#define SHN_BEFORE 0xff00 /* Order section before all others -+ (Solaris). */ -+#define SHN_AFTER 0xff01 /* Order section after all others -+ (Solaris). */ -+#define SHN_HIPROC 0xff1f /* End of processor-specific */ -+#define SHN_LOOS 0xff20 /* Start of OS-specific */ -+#define SHN_HIOS 0xff3f /* End of OS-specific */ -+#define SHN_ABS 0xfff1 /* Associated symbol is absolute */ -+#define SHN_COMMON 0xfff2 /* Associated symbol is common */ -+#define SHN_XINDEX 0xffff /* Index is in extra table. */ -+#define SHN_HIRESERVE 0xffff /* End of reserved indices */ -+ -+/* Legal values for sh_type (section type). */ -+ -+#define SHT_NULL 0 /* Section header table entry unused */ -+#define SHT_PROGBITS 1 /* Program data */ -+#define SHT_SYMTAB 2 /* Symbol table */ -+#define SHT_STRTAB 3 /* String table */ -+#define SHT_RELA 4 /* Relocation entries with addends */ -+#define SHT_HASH 5 /* Symbol hash table */ -+#define SHT_DYNAMIC 6 /* Dynamic linking information */ -+#define SHT_NOTE 7 /* Notes */ -+#define SHT_NOBITS 8 /* Program space with no data (bss) */ -+#define SHT_REL 9 /* Relocation entries, no addends */ -+#define SHT_SHLIB 10 /* Reserved */ -+#define SHT_DYNSYM 11 /* Dynamic linker symbol table */ -+#define SHT_INIT_ARRAY 14 /* Array of constructors */ -+#define SHT_FINI_ARRAY 15 /* Array of destructors */ -+#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */ -+#define SHT_GROUP 17 /* Section group */ -+#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */ -+#define SHT_NUM 19 /* Number of defined types. */ -+#define SHT_LOOS 0x60000000 /* Start OS-specific. */ -+#define SHT_GNU_ATTRIBUTES 0x6ffffff5 /* Object attributes. */ -+#define SHT_GNU_HASH 0x6ffffff6 /* GNU-style hash table. */ -+#define SHT_GNU_LIBLIST 0x6ffffff7 /* Prelink library list */ -+#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */ -+#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */ -+#define SHT_SUNW_move 0x6ffffffa -+#define SHT_SUNW_COMDAT 0x6ffffffb -+#define SHT_SUNW_syminfo 0x6ffffffc -+#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */ -+#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */ -+#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */ -+#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */ -+#define SHT_HIOS 0x6fffffff /* End OS-specific type */ -+#define SHT_LOPROC 0x70000000 /* Start of processor-specific */ -+#define SHT_HIPROC 0x7fffffff /* End of processor-specific */ -+#define SHT_LOUSER 0x80000000 /* Start of application-specific */ -+#define SHT_HIUSER 0x8fffffff /* End of application-specific */ -+ -+/* Legal values for sh_flags (section flags). */ -+ -+#define SHF_WRITE (1 << 0) /* Writable */ -+#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */ -+#define SHF_EXECINSTR (1 << 2) /* Executable */ -+#define SHF_MERGE (1 << 4) /* Might be merged */ -+#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */ -+#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */ -+#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */ -+#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling -+ required */ -+#define SHF_GROUP (1 << 9) /* Section is member of a group. */ -+#define SHF_TLS (1 << 10) /* Section hold thread-local data. */ -+#define SHF_MASKOS 0x0ff00000 /* OS-specific. */ -+#define SHF_MASKPROC 0xf0000000 /* Processor-specific */ -+#define SHF_ORDERED (1 << 30) /* Special ordering requirement -+ (Solaris). */ -+#define SHF_EXCLUDE (1 << 31) /* Section is excluded unless -+ referenced or allocated (Solaris).*/ -+ -+/* Section group handling. */ -+#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */ -+ -+/* Symbol table entry. */ -+ -+typedef struct -+{ -+ Elf32_Word st_name; /* Symbol name (string tbl index) */ -+ Elf32_Addr st_value; /* Symbol value */ -+ Elf32_Word st_size; /* Symbol size */ -+ unsigned char st_info; /* Symbol type and binding */ -+ unsigned char st_other; /* Symbol visibility */ -+ Elf32_Section st_shndx; /* Section index */ -+} Elf32_Sym; -+ -+typedef struct -+{ -+ Elf64_Word st_name; /* Symbol name (string tbl index) */ -+ unsigned char st_info; /* Symbol type and binding */ -+ unsigned char st_other; /* Symbol visibility */ -+ Elf64_Section st_shndx; /* Section index */ -+ Elf64_Addr st_value; /* Symbol value */ -+ Elf64_Xword st_size; /* Symbol size */ -+} Elf64_Sym; -+ -+/* The syminfo section if available contains additional information about -+ every dynamic symbol. */ -+ -+typedef struct -+{ -+ Elf32_Half si_boundto; /* Direct bindings, symbol bound to */ -+ Elf32_Half si_flags; /* Per symbol flags */ -+} Elf32_Syminfo; -+ -+typedef struct -+{ -+ Elf64_Half si_boundto; /* Direct bindings, symbol bound to */ -+ Elf64_Half si_flags; /* Per symbol flags */ -+} Elf64_Syminfo; -+ -+/* Possible values for si_boundto. */ -+#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */ -+#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */ -+#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */ -+ -+/* Possible bitmasks for si_flags. */ -+#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */ -+#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */ -+#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */ -+#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy -+ loaded */ -+/* Syminfo version values. */ -+#define SYMINFO_NONE 0 -+#define SYMINFO_CURRENT 1 -+#define SYMINFO_NUM 2 -+ -+ -+/* How to extract and insert information held in the st_info field. */ -+ -+#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4) -+#define ELF32_ST_TYPE(val) ((val) & 0xf) -+#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf)) -+ -+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */ -+#define ELF64_ST_BIND(val) ELF32_ST_BIND (val) -+#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val) -+#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type)) -+ -+/* Legal values for ST_BIND subfield of st_info (symbol binding). */ -+ -+#define STB_LOCAL 0 /* Local symbol */ -+#define STB_GLOBAL 1 /* Global symbol */ -+#define STB_WEAK 2 /* Weak symbol */ -+#define STB_NUM 3 /* Number of defined types. */ -+#define STB_LOOS 10 /* Start of OS-specific */ -+#define STB_GNU_UNIQUE 10 /* Unique symbol. */ -+#define STB_HIOS 12 /* End of OS-specific */ -+#define STB_LOPROC 13 /* Start of processor-specific */ -+#define STB_HIPROC 15 /* End of processor-specific */ -+ -+/* Legal values for ST_TYPE subfield of st_info (symbol type). */ -+ -+#define STT_NOTYPE 0 /* Symbol type is unspecified */ -+#define STT_OBJECT 1 /* Symbol is a data object */ -+#define STT_FUNC 2 /* Symbol is a code object */ -+#define STT_SECTION 3 /* Symbol associated with a section */ -+#define STT_FILE 4 /* Symbol's name is file name */ -+#define STT_COMMON 5 /* Symbol is a common data object */ -+#define STT_TLS 6 /* Symbol is thread-local data object*/ -+#define STT_NUM 7 /* Number of defined types. */ -+#define STT_LOOS 10 /* Start of OS-specific */ -+#define STT_GNU_IFUNC 10 /* Symbol is indirect code object */ -+#define STT_HIOS 12 /* End of OS-specific */ -+#define STT_LOPROC 13 /* Start of processor-specific */ -+#define STT_HIPROC 15 /* End of processor-specific */ -+ -+ -+/* Symbol table indices are found in the hash buckets and chain table -+ of a symbol hash table section. This special index value indicates -+ the end of a chain, meaning no further symbols are found in that bucket. */ -+ -+#define STN_UNDEF 0 /* End of a chain. */ -+ -+ -+/* How to extract and insert information held in the st_other field. */ -+ -+#define ELF32_ST_VISIBILITY(o) ((o) & 0x03) -+ -+/* For ELF64 the definitions are the same. */ -+#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o) -+ -+/* Symbol visibility specification encoded in the st_other field. */ -+#define STV_DEFAULT 0 /* Default symbol visibility rules */ -+#define STV_INTERNAL 1 /* Processor specific hidden class */ -+#define STV_HIDDEN 2 /* Sym unavailable in other modules */ -+#define STV_PROTECTED 3 /* Not preemptible, not exported */ -+ -+ -+/* Relocation table entry without addend (in section of type SHT_REL). */ -+ -+typedef struct -+{ -+ Elf32_Addr r_offset; /* Address */ -+ Elf32_Word r_info; /* Relocation type and symbol index */ -+} Elf32_Rel; -+ -+/* I have seen two different definitions of the Elf64_Rel and -+ Elf64_Rela structures, so we'll leave them out until Novell (or -+ whoever) gets their act together. */ -+/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */ -+ -+typedef struct -+{ -+ Elf64_Addr r_offset; /* Address */ -+ Elf64_Xword r_info; /* Relocation type and symbol index */ -+} Elf64_Rel; -+ -+/* Relocation table entry with addend (in section of type SHT_RELA). */ -+ -+typedef struct -+{ -+ Elf32_Addr r_offset; /* Address */ -+ Elf32_Word r_info; /* Relocation type and symbol index */ -+ Elf32_Sword r_addend; /* Addend */ -+} Elf32_Rela; -+ -+typedef struct -+{ -+ Elf64_Addr r_offset; /* Address */ -+ Elf64_Xword r_info; /* Relocation type and symbol index */ -+ Elf64_Sxword r_addend; /* Addend */ -+} Elf64_Rela; -+ -+/* How to extract and insert information held in the r_info field. */ -+ -+#define ELF32_R_SYM(val) ((val) >> 8) -+#define ELF32_R_TYPE(val) ((val) & 0xff) -+#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff)) -+ -+#define ELF64_R_SYM(i) ((i) >> 32) -+#define ELF64_R_TYPE(i) ((i) & 0xffffffff) -+#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type)) -+ -+/* Program segment header. */ -+ -+typedef struct -+{ -+ Elf32_Word p_type; /* Segment type */ -+ Elf32_Off p_offset; /* Segment file offset */ -+ Elf32_Addr p_vaddr; /* Segment virtual address */ -+ Elf32_Addr p_paddr; /* Segment physical address */ -+ Elf32_Word p_filesz; /* Segment size in file */ -+ Elf32_Word p_memsz; /* Segment size in memory */ -+ Elf32_Word p_flags; /* Segment flags */ -+ Elf32_Word p_align; /* Segment alignment */ -+} Elf32_Phdr; -+ -+typedef struct -+{ -+ Elf64_Word p_type; /* Segment type */ -+ Elf64_Word p_flags; /* Segment flags */ -+ Elf64_Off p_offset; /* Segment file offset */ -+ Elf64_Addr p_vaddr; /* Segment virtual address */ -+ Elf64_Addr p_paddr; /* Segment physical address */ -+ Elf64_Xword p_filesz; /* Segment size in file */ -+ Elf64_Xword p_memsz; /* Segment size in memory */ -+ Elf64_Xword p_align; /* Segment alignment */ -+} Elf64_Phdr; -+ -+/* Special value for e_phnum. This indicates that the real number of -+ program headers is too large to fit into e_phnum. Instead the real -+ value is in the field sh_info of section 0. */ -+ -+#define PN_XNUM 0xffff -+ -+/* Legal values for p_type (segment type). */ -+ -+#define PT_NULL 0 /* Program header table entry unused */ -+#define PT_LOAD 1 /* Loadable program segment */ -+#define PT_DYNAMIC 2 /* Dynamic linking information */ -+#define PT_INTERP 3 /* Program interpreter */ -+#define PT_NOTE 4 /* Auxiliary information */ -+#define PT_SHLIB 5 /* Reserved */ -+#define PT_PHDR 6 /* Entry for header table itself */ -+#define PT_TLS 7 /* Thread-local storage segment */ -+#define PT_NUM 8 /* Number of defined types */ -+#define PT_LOOS 0x60000000 /* Start of OS-specific */ -+#define PT_GNU_EH_FRAME 0x6474e550 /* GCC .eh_frame_hdr segment */ -+#define PT_GNU_STACK 0x6474e551 /* Indicates stack executability */ -+#define PT_GNU_RELRO 0x6474e552 /* Read-only after relocation */ -+#define PT_LOSUNW 0x6ffffffa -+#define PT_SUNWBSS 0x6ffffffa /* Sun Specific segment */ -+#define PT_SUNWSTACK 0x6ffffffb /* Stack segment */ -+#define PT_HISUNW 0x6fffffff -+#define PT_HIOS 0x6fffffff /* End of OS-specific */ -+#define PT_LOPROC 0x70000000 /* Start of processor-specific */ -+#define PT_HIPROC 0x7fffffff /* End of processor-specific */ -+ -+/* Legal values for p_flags (segment flags). */ -+ -+#define PF_X (1 << 0) /* Segment is executable */ -+#define PF_W (1 << 1) /* Segment is writable */ -+#define PF_R (1 << 2) /* Segment is readable */ -+#define PF_MASKOS 0x0ff00000 /* OS-specific */ -+#define PF_MASKPROC 0xf0000000 /* Processor-specific */ -+ -+/* Legal values for note segment descriptor types for core files. */ -+ -+#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */ -+#define NT_FPREGSET 2 /* Contains copy of fpregset struct */ -+#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */ -+#define NT_PRXREG 4 /* Contains copy of prxregset struct */ -+#define NT_TASKSTRUCT 4 /* Contains copy of task structure */ -+#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */ -+#define NT_AUXV 6 /* Contains copy of auxv array */ -+#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */ -+#define NT_ASRS 8 /* Contains copy of asrset struct */ -+#define NT_PSTATUS 10 /* Contains copy of pstatus struct */ -+#define NT_PSINFO 13 /* Contains copy of psinfo struct */ -+#define NT_PRCRED 14 /* Contains copy of prcred struct */ -+#define NT_UTSNAME 15 /* Contains copy of utsname struct */ -+#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */ -+#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */ -+#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct */ -+#define NT_PRXFPREG 0x46e62b7f /* Contains copy of user_fxsr_struct */ -+#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ -+#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ -+#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ -+#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ -+#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ -+#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ -+ -+/* Legal values for the note segment descriptor types for object files. */ -+ -+#define NT_VERSION 1 /* Contains a version string. */ -+ -+ -+/* Dynamic section entry. */ -+ -+typedef struct -+{ -+ Elf32_Sword d_tag; /* Dynamic entry type */ -+ union -+ { -+ Elf32_Word d_val; /* Integer value */ -+ Elf32_Addr d_ptr; /* Address value */ -+ } d_un; -+} Elf32_Dyn; -+ -+typedef struct -+{ -+ Elf64_Sxword d_tag; /* Dynamic entry type */ -+ union -+ { -+ Elf64_Xword d_val; /* Integer value */ -+ Elf64_Addr d_ptr; /* Address value */ -+ } d_un; -+} Elf64_Dyn; -+ -+/* Legal values for d_tag (dynamic entry type). */ -+ -+#define DT_NULL 0 /* Marks end of dynamic section */ -+#define DT_NEEDED 1 /* Name of needed library */ -+#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */ -+#define DT_PLTGOT 3 /* Processor defined value */ -+#define DT_HASH 4 /* Address of symbol hash table */ -+#define DT_STRTAB 5 /* Address of string table */ -+#define DT_SYMTAB 6 /* Address of symbol table */ -+#define DT_RELA 7 /* Address of Rela relocs */ -+#define DT_RELASZ 8 /* Total size of Rela relocs */ -+#define DT_RELAENT 9 /* Size of one Rela reloc */ -+#define DT_STRSZ 10 /* Size of string table */ -+#define DT_SYMENT 11 /* Size of one symbol table entry */ -+#define DT_INIT 12 /* Address of init function */ -+#define DT_FINI 13 /* Address of termination function */ -+#define DT_SONAME 14 /* Name of shared object */ -+#define DT_RPATH 15 /* Library search path (deprecated) */ -+#define DT_SYMBOLIC 16 /* Start symbol search here */ -+#define DT_REL 17 /* Address of Rel relocs */ -+#define DT_RELSZ 18 /* Total size of Rel relocs */ -+#define DT_RELENT 19 /* Size of one Rel reloc */ -+#define DT_PLTREL 20 /* Type of reloc in PLT */ -+#define DT_DEBUG 21 /* For debugging; unspecified */ -+#define DT_TEXTREL 22 /* Reloc might modify .text */ -+#define DT_JMPREL 23 /* Address of PLT relocs */ -+#define DT_BIND_NOW 24 /* Process relocations of object */ -+#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */ -+#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */ -+#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */ -+#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */ -+#define DT_RUNPATH 29 /* Library search path */ -+#define DT_FLAGS 30 /* Flags for the object being loaded */ -+#define DT_ENCODING 32 /* Start of encoded range */ -+#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/ -+#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */ -+#define DT_NUM 34 /* Number used */ -+#define DT_LOOS 0x6000000d /* Start of OS-specific */ -+#define DT_HIOS 0x6ffff000 /* End of OS-specific */ -+#define DT_LOPROC 0x70000000 /* Start of processor-specific */ -+#define DT_HIPROC 0x7fffffff /* End of processor-specific */ -+#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */ -+ -+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the -+ Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's -+ approach. */ -+#define DT_VALRNGLO 0x6ffffd00 -+#define DT_GNU_PRELINKED 0x6ffffdf5 /* Prelinking timestamp */ -+#define DT_GNU_CONFLICTSZ 0x6ffffdf6 /* Size of conflict section */ -+#define DT_GNU_LIBLISTSZ 0x6ffffdf7 /* Size of library list */ -+#define DT_CHECKSUM 0x6ffffdf8 -+#define DT_PLTPADSZ 0x6ffffdf9 -+#define DT_MOVEENT 0x6ffffdfa -+#define DT_MOVESZ 0x6ffffdfb -+#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */ -+#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting -+ the following DT_* entry. */ -+#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */ -+#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */ -+#define DT_VALRNGHI 0x6ffffdff -+#define DT_VALTAGIDX(tag) (DT_VALRNGHI - (tag)) /* Reverse order! */ -+#define DT_VALNUM 12 -+ -+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the -+ Dyn.d_un.d_ptr field of the Elf*_Dyn structure. -+ -+ If any adjustment is made to the ELF object after it has been -+ built these entries will need to be adjusted. */ -+#define DT_ADDRRNGLO 0x6ffffe00 -+#define DT_GNU_HASH 0x6ffffef5 /* GNU-style hash table. */ -+#define DT_TLSDESC_PLT 0x6ffffef6 -+#define DT_TLSDESC_GOT 0x6ffffef7 -+#define DT_GNU_CONFLICT 0x6ffffef8 /* Start of conflict section */ -+#define DT_GNU_LIBLIST 0x6ffffef9 /* Library list */ -+#define DT_CONFIG 0x6ffffefa /* Configuration information. */ -+#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */ -+#define DT_AUDIT 0x6ffffefc /* Object auditing. */ -+#define DT_PLTPAD 0x6ffffefd /* PLT padding. */ -+#define DT_MOVETAB 0x6ffffefe /* Move table. */ -+#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */ -+#define DT_ADDRRNGHI 0x6ffffeff -+#define DT_ADDRTAGIDX(tag) (DT_ADDRRNGHI - (tag)) /* Reverse order! */ -+#define DT_ADDRNUM 11 -+ -+/* The versioning entry types. The next are defined as part of the -+ GNU extension. */ -+#define DT_VERSYM 0x6ffffff0 -+ -+#define DT_RELACOUNT 0x6ffffff9 -+#define DT_RELCOUNT 0x6ffffffa -+ -+/* These were chosen by Sun. */ -+#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */ -+#define DT_VERDEF 0x6ffffffc /* Address of version definition -+ table */ -+#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */ -+#define DT_VERNEED 0x6ffffffe /* Address of table with needed -+ versions */ -+#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */ -+#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */ -+#define DT_VERSIONTAGNUM 16 -+ -+/* Sun added these machine-independent extensions in the "processor-specific" -+ range. Be compatible. */ -+#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */ -+#define DT_FILTER 0x7fffffff /* Shared object to get values from */ -+#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1) -+#define DT_EXTRANUM 3 -+ -+/* Values of `d_un.d_val' in the DT_FLAGS entry. */ -+#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */ -+#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */ -+#define DF_TEXTREL 0x00000004 /* Object contains text relocations */ -+#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */ -+#define DF_STATIC_TLS 0x00000010 /* Module uses the static TLS model */ -+ -+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1 -+ entry in the dynamic section. */ -+#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */ -+#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */ -+#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */ -+#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/ -+#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/ -+#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/ -+#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */ -+#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */ -+#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */ -+#define DF_1_TRANS 0x00000200 -+#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */ -+#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */ -+#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */ -+#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/ -+#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */ -+#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */ -+#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */ -+ -+/* Flags for the feature selection in DT_FEATURE_1. */ -+#define DTF_1_PARINIT 0x00000001 -+#define DTF_1_CONFEXP 0x00000002 -+ -+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */ -+#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */ -+#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not -+ generally available. */ -+ -+/* Version definition sections. */ -+ -+typedef struct -+{ -+ Elf32_Half vd_version; /* Version revision */ -+ Elf32_Half vd_flags; /* Version information */ -+ Elf32_Half vd_ndx; /* Version Index */ -+ Elf32_Half vd_cnt; /* Number of associated aux entries */ -+ Elf32_Word vd_hash; /* Version name hash value */ -+ Elf32_Word vd_aux; /* Offset in bytes to verdaux array */ -+ Elf32_Word vd_next; /* Offset in bytes to next verdef -+ entry */ -+} Elf32_Verdef; -+ -+typedef struct -+{ -+ Elf64_Half vd_version; /* Version revision */ -+ Elf64_Half vd_flags; /* Version information */ -+ Elf64_Half vd_ndx; /* Version Index */ -+ Elf64_Half vd_cnt; /* Number of associated aux entries */ -+ Elf64_Word vd_hash; /* Version name hash value */ -+ Elf64_Word vd_aux; /* Offset in bytes to verdaux array */ -+ Elf64_Word vd_next; /* Offset in bytes to next verdef -+ entry */ -+} Elf64_Verdef; -+ -+ -+/* Legal values for vd_version (version revision). */ -+#define VER_DEF_NONE 0 /* No version */ -+#define VER_DEF_CURRENT 1 /* Current version */ -+#define VER_DEF_NUM 2 /* Given version number */ -+ -+/* Legal values for vd_flags (version information flags). */ -+#define VER_FLG_BASE 0x1 /* Version definition of file itself */ -+#define VER_FLG_WEAK 0x2 /* Weak version identifier */ -+ -+/* Versym symbol index values. */ -+#define VER_NDX_LOCAL 0 /* Symbol is local. */ -+#define VER_NDX_GLOBAL 1 /* Symbol is global. */ -+#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */ -+#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */ -+ -+/* Auxialiary version information. */ -+ -+typedef struct -+{ -+ Elf32_Word vda_name; /* Version or dependency names */ -+ Elf32_Word vda_next; /* Offset in bytes to next verdaux -+ entry */ -+} Elf32_Verdaux; -+ -+typedef struct -+{ -+ Elf64_Word vda_name; /* Version or dependency names */ -+ Elf64_Word vda_next; /* Offset in bytes to next verdaux -+ entry */ -+} Elf64_Verdaux; -+ -+ -+/* Version dependency section. */ -+ -+typedef struct -+{ -+ Elf32_Half vn_version; /* Version of structure */ -+ Elf32_Half vn_cnt; /* Number of associated aux entries */ -+ Elf32_Word vn_file; /* Offset of filename for this -+ dependency */ -+ Elf32_Word vn_aux; /* Offset in bytes to vernaux array */ -+ Elf32_Word vn_next; /* Offset in bytes to next verneed -+ entry */ -+} Elf32_Verneed; -+ -+typedef struct -+{ -+ Elf64_Half vn_version; /* Version of structure */ -+ Elf64_Half vn_cnt; /* Number of associated aux entries */ -+ Elf64_Word vn_file; /* Offset of filename for this -+ dependency */ -+ Elf64_Word vn_aux; /* Offset in bytes to vernaux array */ -+ Elf64_Word vn_next; /* Offset in bytes to next verneed -+ entry */ -+} Elf64_Verneed; -+ -+ -+/* Legal values for vn_version (version revision). */ -+#define VER_NEED_NONE 0 /* No version */ -+#define VER_NEED_CURRENT 1 /* Current version */ -+#define VER_NEED_NUM 2 /* Given version number */ -+ -+/* Auxiliary needed version information. */ -+ -+typedef struct -+{ -+ Elf32_Word vna_hash; /* Hash value of dependency name */ -+ Elf32_Half vna_flags; /* Dependency specific information */ -+ Elf32_Half vna_other; /* Unused */ -+ Elf32_Word vna_name; /* Dependency name string offset */ -+ Elf32_Word vna_next; /* Offset in bytes to next vernaux -+ entry */ -+} Elf32_Vernaux; -+ -+typedef struct -+{ -+ Elf64_Word vna_hash; /* Hash value of dependency name */ -+ Elf64_Half vna_flags; /* Dependency specific information */ -+ Elf64_Half vna_other; /* Unused */ -+ Elf64_Word vna_name; /* Dependency name string offset */ -+ Elf64_Word vna_next; /* Offset in bytes to next vernaux -+ entry */ -+} Elf64_Vernaux; -+ -+ -+/* Legal values for vna_flags. */ -+#define VER_FLG_WEAK 0x2 /* Weak version identifier */ -+ -+ -+/* Auxiliary vector. */ -+ -+/* This vector is normally only used by the program interpreter. The -+ usual definition in an ABI supplement uses the name auxv_t. The -+ vector is not usually defined in a standard <elf.h> file, but it -+ can't hurt. We rename it to avoid conflicts. The sizes of these -+ types are an arrangement between the exec server and the program -+ interpreter, so we don't fully specify them here. */ -+ -+typedef struct -+{ -+ uint32_t a_type; /* Entry type */ -+ union -+ { -+ uint32_t a_val; /* Integer value */ -+ /* We use to have pointer elements added here. We cannot do that, -+ though, since it does not work when using 32-bit definitions -+ on 64-bit platforms and vice versa. */ -+ } a_un; -+} Elf32_auxv_t; -+ -+typedef struct -+{ -+ uint64_t a_type; /* Entry type */ -+ union -+ { -+ uint64_t a_val; /* Integer value */ -+ /* We use to have pointer elements added here. We cannot do that, -+ though, since it does not work when using 32-bit definitions -+ on 64-bit platforms and vice versa. */ -+ } a_un; -+} Elf64_auxv_t; -+ -+/* Legal values for a_type (entry type). */ -+ -+#define AT_NULL 0 /* End of vector */ -+#define AT_IGNORE 1 /* Entry should be ignored */ -+#define AT_EXECFD 2 /* File descriptor of program */ -+#define AT_PHDR 3 /* Program headers for program */ -+#define AT_PHENT 4 /* Size of program header entry */ -+#define AT_PHNUM 5 /* Number of program headers */ -+#define AT_PAGESZ 6 /* System page size */ -+#define AT_BASE 7 /* Base address of interpreter */ -+#define AT_FLAGS 8 /* Flags */ -+#define AT_ENTRY 9 /* Entry point of program */ -+#define AT_NOTELF 10 /* Program is not ELF */ -+#define AT_UID 11 /* Real uid */ -+#define AT_EUID 12 /* Effective uid */ -+#define AT_GID 13 /* Real gid */ -+#define AT_EGID 14 /* Effective gid */ -+#define AT_CLKTCK 17 /* Frequency of times() */ -+ -+/* Some more special a_type values describing the hardware. */ -+#define AT_PLATFORM 15 /* String identifying platform. */ -+#define AT_HWCAP 16 /* Machine dependent hints about -+ processor capabilities. */ -+ -+/* This entry gives some information about the FPU initialization -+ performed by the kernel. */ -+#define AT_FPUCW 18 /* Used FPU control word. */ -+ -+/* Cache block sizes. */ -+#define AT_DCACHEBSIZE 19 /* Data cache block size. */ -+#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */ -+#define AT_UCACHEBSIZE 21 /* Unified cache block size. */ -+ -+/* A special ignored value for PPC, used by the kernel to control the -+ interpretation of the AUXV. Must be > 16. */ -+#define AT_IGNOREPPC 22 /* Entry should be ignored. */ -+ -+#define AT_SECURE 23 /* Boolean, was exec setuid-like? */ -+ -+#define AT_BASE_PLATFORM 24 /* String identifying real platforms.*/ -+ -+#define AT_RANDOM 25 /* Address of 16 random bytes. */ -+ -+#define AT_EXECFN 31 /* Filename of executable. */ -+ -+/* Pointer to the global system page used for system calls and other -+ nice things. */ -+#define AT_SYSINFO 32 -+#define AT_SYSINFO_EHDR 33 -+ -+/* Shapes of the caches. Bits 0-3 contains associativity; bits 4-7 contains -+ log2 of line size; mask those to get cache size. */ -+#define AT_L1I_CACHESHAPE 34 -+#define AT_L1D_CACHESHAPE 35 -+#define AT_L2_CACHESHAPE 36 -+#define AT_L3_CACHESHAPE 37 -+ -+/* Note section contents. Each entry in the note section begins with -+ a header of a fixed form. */ -+ -+typedef struct -+{ -+ Elf32_Word n_namesz; /* Length of the note's name. */ -+ Elf32_Word n_descsz; /* Length of the note's descriptor. */ -+ Elf32_Word n_type; /* Type of the note. */ -+} Elf32_Nhdr; -+ -+typedef struct -+{ -+ Elf64_Word n_namesz; /* Length of the note's name. */ -+ Elf64_Word n_descsz; /* Length of the note's descriptor. */ -+ Elf64_Word n_type; /* Type of the note. */ -+} Elf64_Nhdr; -+ -+/* Known names of notes. */ -+ -+/* Solaris entries in the note section have this name. */ -+#define ELF_NOTE_SOLARIS "SUNW Solaris" -+ -+/* Note entries for GNU systems have this name. */ -+#define ELF_NOTE_GNU "GNU" -+ -+ -+/* Defined types of notes for Solaris. */ -+ -+/* Value of descriptor (one word) is desired pagesize for the binary. */ -+#define ELF_NOTE_PAGESIZE_HINT 1 -+ -+ -+/* Defined note types for GNU systems. */ -+ -+/* ABI information. The descriptor consists of words: -+ word 0: OS descriptor -+ word 1: major version of the ABI -+ word 2: minor version of the ABI -+ word 3: subminor version of the ABI -+*/ -+#define NT_GNU_ABI_TAG 1 -+#define ELF_NOTE_ABI NT_GNU_ABI_TAG /* Old name. */ -+ -+/* Known OSes. These values can appear in word 0 of an -+ NT_GNU_ABI_TAG note section entry. */ -+#define ELF_NOTE_OS_LINUX 0 -+#define ELF_NOTE_OS_GNU 1 -+#define ELF_NOTE_OS_SOLARIS2 2 -+#define ELF_NOTE_OS_FREEBSD 3 -+ -+/* Synthetic hwcap information. The descriptor begins with two words: -+ word 0: number of entries -+ word 1: bitmask of enabled entries -+ Then follow variable-length entries, one byte followed by a -+ '\0'-terminated hwcap name string. The byte gives the bit -+ number to test if enabled, (1U << bit) & bitmask. */ -+#define NT_GNU_HWCAP 2 -+ -+/* Build ID bits as generated by ld --build-id. -+ The descriptor consists of any nonzero number of bytes. */ -+#define NT_GNU_BUILD_ID 3 -+ -+/* Version note generated by GNU gold containing a version string. */ -+#define NT_GNU_GOLD_VERSION 4 -+ -+ -+/* Move records. */ -+typedef struct -+{ -+ Elf32_Xword m_value; /* Symbol value. */ -+ Elf32_Word m_info; /* Size and index. */ -+ Elf32_Word m_poffset; /* Symbol offset. */ -+ Elf32_Half m_repeat; /* Repeat count. */ -+ Elf32_Half m_stride; /* Stride info. */ -+} Elf32_Move; -+ -+typedef struct -+{ -+ Elf64_Xword m_value; /* Symbol value. */ -+ Elf64_Xword m_info; /* Size and index. */ -+ Elf64_Xword m_poffset; /* Symbol offset. */ -+ Elf64_Half m_repeat; /* Repeat count. */ -+ Elf64_Half m_stride; /* Stride info. */ -+} Elf64_Move; -+ -+/* Macro to construct move records. */ -+#define ELF32_M_SYM(info) ((info) >> 8) -+#define ELF32_M_SIZE(info) ((unsigned char) (info)) -+#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size)) -+ -+#define ELF64_M_SYM(info) ELF32_M_SYM (info) -+#define ELF64_M_SIZE(info) ELF32_M_SIZE (info) -+#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size) -+ -+ -+/* Motorola 68k specific definitions. */ -+ -+/* Values for Elf32_Ehdr.e_flags. */ -+#define EF_CPU32 0x00810000 -+ -+/* m68k relocs. */ -+ -+#define R_68K_NONE 0 /* No reloc */ -+#define R_68K_32 1 /* Direct 32 bit */ -+#define R_68K_16 2 /* Direct 16 bit */ -+#define R_68K_8 3 /* Direct 8 bit */ -+#define R_68K_PC32 4 /* PC relative 32 bit */ -+#define R_68K_PC16 5 /* PC relative 16 bit */ -+#define R_68K_PC8 6 /* PC relative 8 bit */ -+#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */ -+#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */ -+#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */ -+#define R_68K_GOT32O 10 /* 32 bit GOT offset */ -+#define R_68K_GOT16O 11 /* 16 bit GOT offset */ -+#define R_68K_GOT8O 12 /* 8 bit GOT offset */ -+#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */ -+#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */ -+#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */ -+#define R_68K_PLT32O 16 /* 32 bit PLT offset */ -+#define R_68K_PLT16O 17 /* 16 bit PLT offset */ -+#define R_68K_PLT8O 18 /* 8 bit PLT offset */ -+#define R_68K_COPY 19 /* Copy symbol at runtime */ -+#define R_68K_GLOB_DAT 20 /* Create GOT entry */ -+#define R_68K_JMP_SLOT 21 /* Create PLT entry */ -+#define R_68K_RELATIVE 22 /* Adjust by program base */ -+#define R_68K_TLS_GD32 25 /* 32 bit GOT offset for GD */ -+#define R_68K_TLS_GD16 26 /* 16 bit GOT offset for GD */ -+#define R_68K_TLS_GD8 27 /* 8 bit GOT offset for GD */ -+#define R_68K_TLS_LDM32 28 /* 32 bit GOT offset for LDM */ -+#define R_68K_TLS_LDM16 29 /* 16 bit GOT offset for LDM */ -+#define R_68K_TLS_LDM8 30 /* 8 bit GOT offset for LDM */ -+#define R_68K_TLS_LDO32 31 /* 32 bit module-relative offset */ -+#define R_68K_TLS_LDO16 32 /* 16 bit module-relative offset */ -+#define R_68K_TLS_LDO8 33 /* 8 bit module-relative offset */ -+#define R_68K_TLS_IE32 34 /* 32 bit GOT offset for IE */ -+#define R_68K_TLS_IE16 35 /* 16 bit GOT offset for IE */ -+#define R_68K_TLS_IE8 36 /* 8 bit GOT offset for IE */ -+#define R_68K_TLS_LE32 37 /* 32 bit offset relative to -+ static TLS block */ -+#define R_68K_TLS_LE16 38 /* 16 bit offset relative to -+ static TLS block */ -+#define R_68K_TLS_LE8 39 /* 8 bit offset relative to -+ static TLS block */ -+#define R_68K_TLS_DTPMOD32 40 /* 32 bit module number */ -+#define R_68K_TLS_DTPREL32 41 /* 32 bit module-relative offset */ -+#define R_68K_TLS_TPREL32 42 /* 32 bit TP-relative offset */ -+/* Keep this the last entry. */ -+#define R_68K_NUM 43 -+ -+/* Intel 80386 specific definitions. */ -+ -+/* i386 relocs. */ -+ -+#define R_386_NONE 0 /* No reloc */ -+#define R_386_32 1 /* Direct 32 bit */ -+#define R_386_PC32 2 /* PC relative 32 bit */ -+#define R_386_GOT32 3 /* 32 bit GOT entry */ -+#define R_386_PLT32 4 /* 32 bit PLT address */ -+#define R_386_COPY 5 /* Copy symbol at runtime */ -+#define R_386_GLOB_DAT 6 /* Create GOT entry */ -+#define R_386_JMP_SLOT 7 /* Create PLT entry */ -+#define R_386_RELATIVE 8 /* Adjust by program base */ -+#define R_386_GOTOFF 9 /* 32 bit offset to GOT */ -+#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */ -+#define R_386_32PLT 11 -+#define R_386_TLS_TPOFF 14 /* Offset in static TLS block */ -+#define R_386_TLS_IE 15 /* Address of GOT entry for static TLS -+ block offset */ -+#define R_386_TLS_GOTIE 16 /* GOT entry for static TLS block -+ offset */ -+#define R_386_TLS_LE 17 /* Offset relative to static TLS -+ block */ -+#define R_386_TLS_GD 18 /* Direct 32 bit for GNU version of -+ general dynamic thread local data */ -+#define R_386_TLS_LDM 19 /* Direct 32 bit for GNU version of -+ local dynamic thread local data -+ in LE code */ -+#define R_386_16 20 -+#define R_386_PC16 21 -+#define R_386_8 22 -+#define R_386_PC8 23 -+#define R_386_TLS_GD_32 24 /* Direct 32 bit for general dynamic -+ thread local data */ -+#define R_386_TLS_GD_PUSH 25 /* Tag for pushl in GD TLS code */ -+#define R_386_TLS_GD_CALL 26 /* Relocation for call to -+ __tls_get_addr() */ -+#define R_386_TLS_GD_POP 27 /* Tag for popl in GD TLS code */ -+#define R_386_TLS_LDM_32 28 /* Direct 32 bit for local dynamic -+ thread local data in LE code */ -+#define R_386_TLS_LDM_PUSH 29 /* Tag for pushl in LDM TLS code */ -+#define R_386_TLS_LDM_CALL 30 /* Relocation for call to -+ __tls_get_addr() in LDM code */ -+#define R_386_TLS_LDM_POP 31 /* Tag for popl in LDM TLS code */ -+#define R_386_TLS_LDO_32 32 /* Offset relative to TLS block */ -+#define R_386_TLS_IE_32 33 /* GOT entry for negated static TLS -+ block offset */ -+#define R_386_TLS_LE_32 34 /* Negated offset relative to static -+ TLS block */ -+#define R_386_TLS_DTPMOD32 35 /* ID of module containing symbol */ -+#define R_386_TLS_DTPOFF32 36 /* Offset in TLS block */ -+#define R_386_TLS_TPOFF32 37 /* Negated offset in static TLS block */ -+/* 38? */ -+#define R_386_TLS_GOTDESC 39 /* GOT offset for TLS descriptor. */ -+#define R_386_TLS_DESC_CALL 40 /* Marker of call through TLS -+ descriptor for -+ relaxation. */ -+#define R_386_TLS_DESC 41 /* TLS descriptor containing -+ pointer to code and to -+ argument, returning the TLS -+ offset for the symbol. */ -+#define R_386_IRELATIVE 42 /* Adjust indirectly by program base */ -+/* Keep this the last entry. */ -+#define R_386_NUM 43 -+ -+/* SUN SPARC specific definitions. */ -+ -+/* Legal values for ST_TYPE subfield of st_info (symbol type). */ -+ -+#define STT_SPARC_REGISTER 13 /* Global register reserved to app. */ -+ -+/* Values for Elf64_Ehdr.e_flags. */ -+ -+#define EF_SPARCV9_MM 3 -+#define EF_SPARCV9_TSO 0 -+#define EF_SPARCV9_PSO 1 -+#define EF_SPARCV9_RMO 2 -+#define EF_SPARC_LEDATA 0x800000 /* little endian data */ -+#define EF_SPARC_EXT_MASK 0xFFFF00 -+#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */ -+#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */ -+#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */ -+#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */ -+ -+/* SPARC relocs. */ -+ -+#define R_SPARC_NONE 0 /* No reloc */ -+#define R_SPARC_8 1 /* Direct 8 bit */ -+#define R_SPARC_16 2 /* Direct 16 bit */ -+#define R_SPARC_32 3 /* Direct 32 bit */ -+#define R_SPARC_DISP8 4 /* PC relative 8 bit */ -+#define R_SPARC_DISP16 5 /* PC relative 16 bit */ -+#define R_SPARC_DISP32 6 /* PC relative 32 bit */ -+#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */ -+#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */ -+#define R_SPARC_HI22 9 /* High 22 bit */ -+#define R_SPARC_22 10 /* Direct 22 bit */ -+#define R_SPARC_13 11 /* Direct 13 bit */ -+#define R_SPARC_LO10 12 /* Truncated 10 bit */ -+#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */ -+#define R_SPARC_GOT13 14 /* 13 bit GOT entry */ -+#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */ -+#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */ -+#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */ -+#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */ -+#define R_SPARC_COPY 19 /* Copy symbol at runtime */ -+#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */ -+#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */ -+#define R_SPARC_RELATIVE 22 /* Adjust by program base */ -+#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */ -+ -+/* Additional Sparc64 relocs. */ -+ -+#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */ -+#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */ -+#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */ -+#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */ -+#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */ -+#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */ -+#define R_SPARC_10 30 /* Direct 10 bit */ -+#define R_SPARC_11 31 /* Direct 11 bit */ -+#define R_SPARC_64 32 /* Direct 64 bit */ -+#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */ -+#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */ -+#define R_SPARC_HM10 35 /* High middle 10 bits of ... */ -+#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */ -+#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */ -+#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */ -+#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */ -+#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */ -+#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */ -+#define R_SPARC_GLOB_JMP 42 /* was part of v9 ABI but was removed */ -+#define R_SPARC_7 43 /* Direct 7 bit */ -+#define R_SPARC_5 44 /* Direct 5 bit */ -+#define R_SPARC_6 45 /* Direct 6 bit */ -+#define R_SPARC_DISP64 46 /* PC relative 64 bit */ -+#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */ -+#define R_SPARC_HIX22 48 /* High 22 bit complemented */ -+#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */ -+#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */ -+#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */ -+#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */ -+#define R_SPARC_REGISTER 53 /* Global register usage */ -+#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */ -+#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */ -+#define R_SPARC_TLS_GD_HI22 56 -+#define R_SPARC_TLS_GD_LO10 57 -+#define R_SPARC_TLS_GD_ADD 58 -+#define R_SPARC_TLS_GD_CALL 59 -+#define R_SPARC_TLS_LDM_HI22 60 -+#define R_SPARC_TLS_LDM_LO10 61 -+#define R_SPARC_TLS_LDM_ADD 62 -+#define R_SPARC_TLS_LDM_CALL 63 -+#define R_SPARC_TLS_LDO_HIX22 64 -+#define R_SPARC_TLS_LDO_LOX10 65 -+#define R_SPARC_TLS_LDO_ADD 66 -+#define R_SPARC_TLS_IE_HI22 67 -+#define R_SPARC_TLS_IE_LO10 68 -+#define R_SPARC_TLS_IE_LD 69 -+#define R_SPARC_TLS_IE_LDX 70 -+#define R_SPARC_TLS_IE_ADD 71 -+#define R_SPARC_TLS_LE_HIX22 72 -+#define R_SPARC_TLS_LE_LOX10 73 -+#define R_SPARC_TLS_DTPMOD32 74 -+#define R_SPARC_TLS_DTPMOD64 75 -+#define R_SPARC_TLS_DTPOFF32 76 -+#define R_SPARC_TLS_DTPOFF64 77 -+#define R_SPARC_TLS_TPOFF32 78 -+#define R_SPARC_TLS_TPOFF64 79 -+#define R_SPARC_GOTDATA_HIX22 80 -+#define R_SPARC_GOTDATA_LOX10 81 -+#define R_SPARC_GOTDATA_OP_HIX22 82 -+#define R_SPARC_GOTDATA_OP_LOX10 83 -+#define R_SPARC_GOTDATA_OP 84 -+#define R_SPARC_H34 85 -+#define R_SPARC_SIZE32 86 -+#define R_SPARC_SIZE64 87 -+#define R_SPARC_WDISP10 88 -+#define R_SPARC_JMP_IREL 248 -+#define R_SPARC_IRELATIVE 249 -+#define R_SPARC_GNU_VTINHERIT 250 -+#define R_SPARC_GNU_VTENTRY 251 -+#define R_SPARC_REV32 252 -+/* Keep this the last entry. */ -+#define R_SPARC_NUM 253 -+ -+/* For Sparc64, legal values for d_tag of Elf64_Dyn. */ -+ -+#define DT_SPARC_REGISTER 0x70000001 -+#define DT_SPARC_NUM 2 -+ -+/* MIPS R3000 specific definitions. */ -+ -+/* Legal values for e_flags field of Elf32_Ehdr. */ -+ -+#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */ -+#define EF_MIPS_PIC 2 /* Contains PIC code */ -+#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */ -+#define EF_MIPS_XGOT 8 -+#define EF_MIPS_64BIT_WHIRL 16 -+#define EF_MIPS_ABI2 32 -+#define EF_MIPS_ABI_ON32 64 -+#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */ -+ -+/* Legal values for MIPS architecture level. */ -+ -+#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ -+#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ -+#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ -+#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ -+#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ -+#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */ -+#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */ -+ -+/* The following are non-official names and should not be used. */ -+ -+#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ -+#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ -+#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ -+#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ -+#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ -+#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */ -+#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */ -+ -+/* Special section indices. */ -+ -+#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */ -+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */ -+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */ -+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */ -+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */ -+ -+/* Legal values for sh_type field of Elf32_Shdr. */ -+ -+#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */ -+#define SHT_MIPS_MSYM 0x70000001 -+#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */ -+#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */ -+#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */ -+#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/ -+#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */ -+#define SHT_MIPS_PACKAGE 0x70000007 -+#define SHT_MIPS_PACKSYM 0x70000008 -+#define SHT_MIPS_RELD 0x70000009 -+#define SHT_MIPS_IFACE 0x7000000b -+#define SHT_MIPS_CONTENT 0x7000000c -+#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */ -+#define SHT_MIPS_SHDR 0x70000010 -+#define SHT_MIPS_FDESC 0x70000011 -+#define SHT_MIPS_EXTSYM 0x70000012 -+#define SHT_MIPS_DENSE 0x70000013 -+#define SHT_MIPS_PDESC 0x70000014 -+#define SHT_MIPS_LOCSYM 0x70000015 -+#define SHT_MIPS_AUXSYM 0x70000016 -+#define SHT_MIPS_OPTSYM 0x70000017 -+#define SHT_MIPS_LOCSTR 0x70000018 -+#define SHT_MIPS_LINE 0x70000019 -+#define SHT_MIPS_RFDESC 0x7000001a -+#define SHT_MIPS_DELTASYM 0x7000001b -+#define SHT_MIPS_DELTAINST 0x7000001c -+#define SHT_MIPS_DELTACLASS 0x7000001d -+#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */ -+#define SHT_MIPS_DELTADECL 0x7000001f -+#define SHT_MIPS_SYMBOL_LIB 0x70000020 -+#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */ -+#define SHT_MIPS_TRANSLATE 0x70000022 -+#define SHT_MIPS_PIXIE 0x70000023 -+#define SHT_MIPS_XLATE 0x70000024 -+#define SHT_MIPS_XLATE_DEBUG 0x70000025 -+#define SHT_MIPS_WHIRL 0x70000026 -+#define SHT_MIPS_EH_REGION 0x70000027 -+#define SHT_MIPS_XLATE_OLD 0x70000028 -+#define SHT_MIPS_PDR_EXCEPTION 0x70000029 -+ -+/* Legal values for sh_flags field of Elf32_Shdr. */ -+ -+#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */ -+#define SHF_MIPS_MERGE 0x20000000 -+#define SHF_MIPS_ADDR 0x40000000 -+#define SHF_MIPS_STRINGS 0x80000000 -+#define SHF_MIPS_NOSTRIP 0x08000000 -+#define SHF_MIPS_LOCAL 0x04000000 -+#define SHF_MIPS_NAMES 0x02000000 -+#define SHF_MIPS_NODUPE 0x01000000 -+ -+ -+/* Symbol tables. */ -+ -+/* MIPS specific values for `st_other'. */ -+#define STO_MIPS_DEFAULT 0x0 -+#define STO_MIPS_INTERNAL 0x1 -+#define STO_MIPS_HIDDEN 0x2 -+#define STO_MIPS_PROTECTED 0x3 -+#define STO_MIPS_PLT 0x8 -+#define STO_MIPS_SC_ALIGN_UNUSED 0xff -+ -+/* MIPS specific values for `st_info'. */ -+#define STB_MIPS_SPLIT_COMMON 13 -+ -+/* Entries found in sections of type SHT_MIPS_GPTAB. */ -+ -+typedef union -+{ -+ struct -+ { -+ Elf32_Word gt_current_g_value; /* -G value used for compilation */ -+ Elf32_Word gt_unused; /* Not used */ -+ } gt_header; /* First entry in section */ -+ struct -+ { -+ Elf32_Word gt_g_value; /* If this value were used for -G */ -+ Elf32_Word gt_bytes; /* This many bytes would be used */ -+ } gt_entry; /* Subsequent entries in section */ -+} Elf32_gptab; -+ -+/* Entry found in sections of type SHT_MIPS_REGINFO. */ -+ -+typedef struct -+{ -+ Elf32_Word ri_gprmask; /* General registers used */ -+ Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */ -+ Elf32_Sword ri_gp_value; /* $gp register value */ -+} Elf32_RegInfo; -+ -+/* Entries found in sections of type SHT_MIPS_OPTIONS. */ -+ -+typedef struct -+{ -+ unsigned char kind; /* Determines interpretation of the -+ variable part of descriptor. */ -+ unsigned char size; /* Size of descriptor, including header. */ -+ Elf32_Section section; /* Section header index of section affected, -+ 0 for global options. */ -+ Elf32_Word info; /* Kind-specific information. */ -+} Elf_Options; -+ -+/* Values for `kind' field in Elf_Options. */ -+ -+#define ODK_NULL 0 /* Undefined. */ -+#define ODK_REGINFO 1 /* Register usage information. */ -+#define ODK_EXCEPTIONS 2 /* Exception processing options. */ -+#define ODK_PAD 3 /* Section padding options. */ -+#define ODK_HWPATCH 4 /* Hardware workarounds performed */ -+#define ODK_FILL 5 /* record the fill value used by the linker. */ -+#define ODK_TAGS 6 /* reserve space for desktop tools to write. */ -+#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */ -+#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */ -+ -+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */ -+ -+#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */ -+#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */ -+#define OEX_PAGE0 0x10000 /* page zero must be mapped. */ -+#define OEX_SMM 0x20000 /* Force sequential memory mode? */ -+#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */ -+#define OEX_PRECISEFP OEX_FPDBUG -+#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */ -+ -+#define OEX_FPU_INVAL 0x10 -+#define OEX_FPU_DIV0 0x08 -+#define OEX_FPU_OFLO 0x04 -+#define OEX_FPU_UFLO 0x02 -+#define OEX_FPU_INEX 0x01 -+ -+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */ -+ -+#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */ -+#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */ -+#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */ -+#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */ -+ -+#define OPAD_PREFIX 0x1 -+#define OPAD_POSTFIX 0x2 -+#define OPAD_SYMBOL 0x4 -+ -+/* Entry found in `.options' section. */ -+ -+typedef struct -+{ -+ Elf32_Word hwp_flags1; /* Extra flags. */ -+ Elf32_Word hwp_flags2; /* Extra flags. */ -+} Elf_Options_Hw; -+ -+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */ -+ -+#define OHWA0_R4KEOP_CHECKED 0x00000001 -+#define OHWA1_R4KEOP_CLEAN 0x00000002 -+ -+/* MIPS relocs. */ -+ -+#define R_MIPS_NONE 0 /* No reloc */ -+#define R_MIPS_16 1 /* Direct 16 bit */ -+#define R_MIPS_32 2 /* Direct 32 bit */ -+#define R_MIPS_REL32 3 /* PC relative 32 bit */ -+#define R_MIPS_26 4 /* Direct 26 bit shifted */ -+#define R_MIPS_HI16 5 /* High 16 bit */ -+#define R_MIPS_LO16 6 /* Low 16 bit */ -+#define R_MIPS_GPREL16 7 /* GP relative 16 bit */ -+#define R_MIPS_LITERAL 8 /* 16 bit literal entry */ -+#define R_MIPS_GOT16 9 /* 16 bit GOT entry */ -+#define R_MIPS_PC16 10 /* PC relative 16 bit */ -+#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */ -+#define R_MIPS_GPREL32 12 /* GP relative 32 bit */ -+ -+#define R_MIPS_SHIFT5 16 -+#define R_MIPS_SHIFT6 17 -+#define R_MIPS_64 18 -+#define R_MIPS_GOT_DISP 19 -+#define R_MIPS_GOT_PAGE 20 -+#define R_MIPS_GOT_OFST 21 -+#define R_MIPS_GOT_HI16 22 -+#define R_MIPS_GOT_LO16 23 -+#define R_MIPS_SUB 24 -+#define R_MIPS_INSERT_A 25 -+#define R_MIPS_INSERT_B 26 -+#define R_MIPS_DELETE 27 -+#define R_MIPS_HIGHER 28 -+#define R_MIPS_HIGHEST 29 -+#define R_MIPS_CALL_HI16 30 -+#define R_MIPS_CALL_LO16 31 -+#define R_MIPS_SCN_DISP 32 -+#define R_MIPS_REL16 33 -+#define R_MIPS_ADD_IMMEDIATE 34 -+#define R_MIPS_PJUMP 35 -+#define R_MIPS_RELGOT 36 -+#define R_MIPS_JALR 37 -+#define R_MIPS_TLS_DTPMOD32 38 /* Module number 32 bit */ -+#define R_MIPS_TLS_DTPREL32 39 /* Module-relative offset 32 bit */ -+#define R_MIPS_TLS_DTPMOD64 40 /* Module number 64 bit */ -+#define R_MIPS_TLS_DTPREL64 41 /* Module-relative offset 64 bit */ -+#define R_MIPS_TLS_GD 42 /* 16 bit GOT offset for GD */ -+#define R_MIPS_TLS_LDM 43 /* 16 bit GOT offset for LDM */ -+#define R_MIPS_TLS_DTPREL_HI16 44 /* Module-relative offset, high 16 bits */ -+#define R_MIPS_TLS_DTPREL_LO16 45 /* Module-relative offset, low 16 bits */ -+#define R_MIPS_TLS_GOTTPREL 46 /* 16 bit GOT offset for IE */ -+#define R_MIPS_TLS_TPREL32 47 /* TP-relative offset, 32 bit */ -+#define R_MIPS_TLS_TPREL64 48 /* TP-relative offset, 64 bit */ -+#define R_MIPS_TLS_TPREL_HI16 49 /* TP-relative offset, high 16 bits */ -+#define R_MIPS_TLS_TPREL_LO16 50 /* TP-relative offset, low 16 bits */ -+#define R_MIPS_GLOB_DAT 51 -+#define R_MIPS_COPY 126 -+#define R_MIPS_JUMP_SLOT 127 -+/* Keep this the last entry. */ -+#define R_MIPS_NUM 128 -+ -+/* Legal values for p_type field of Elf32_Phdr. */ -+ -+#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */ -+#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */ -+#define PT_MIPS_OPTIONS 0x70000002 -+ -+/* Special program header types. */ -+ -+#define PF_MIPS_LOCAL 0x10000000 -+ -+/* Legal values for d_tag field of Elf32_Dyn. */ -+ -+#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */ -+#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */ -+#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */ -+#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */ -+#define DT_MIPS_FLAGS 0x70000005 /* Flags */ -+#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */ -+#define DT_MIPS_MSYM 0x70000007 -+#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */ -+#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */ -+#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */ -+#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */ -+#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */ -+#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */ -+#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */ -+#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */ -+#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */ -+#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */ -+#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */ -+#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in -+ DT_MIPS_DELTA_CLASS. */ -+#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */ -+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in -+ DT_MIPS_DELTA_INSTANCE. */ -+#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */ -+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in -+ DT_MIPS_DELTA_RELOC. */ -+#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta -+ relocations refer to. */ -+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in -+ DT_MIPS_DELTA_SYM. */ -+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the -+ class declaration. */ -+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in -+ DT_MIPS_DELTA_CLASSSYM. */ -+#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */ -+#define DT_MIPS_PIXIE_INIT 0x70000023 -+#define DT_MIPS_SYMBOL_LIB 0x70000024 -+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025 -+#define DT_MIPS_LOCAL_GOTIDX 0x70000026 -+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027 -+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028 -+#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */ -+#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */ -+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b -+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */ -+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve -+ function stored in GOT. */ -+#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added -+ by rld on dlopen() calls. */ -+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */ -+#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */ -+#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */ -+/* The address of .got.plt in an executable using the new non-PIC ABI. */ -+#define DT_MIPS_PLTGOT 0x70000032 -+/* The base of the PLT in an executable using the new non-PIC ABI if that -+ PLT is writable. For a non-writable PLT, this is omitted or has a zero -+ value. */ -+#define DT_MIPS_RWPLT 0x70000034 -+#define DT_MIPS_NUM 0x35 -+ -+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */ -+ -+#define RHF_NONE 0 /* No flags */ -+#define RHF_QUICKSTART (1 << 0) /* Use quickstart */ -+#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */ -+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */ -+#define RHF_NO_MOVE (1 << 3) -+#define RHF_SGI_ONLY (1 << 4) -+#define RHF_GUARANTEE_INIT (1 << 5) -+#define RHF_DELTA_C_PLUS_PLUS (1 << 6) -+#define RHF_GUARANTEE_START_INIT (1 << 7) -+#define RHF_PIXIE (1 << 8) -+#define RHF_DEFAULT_DELAY_LOAD (1 << 9) -+#define RHF_REQUICKSTART (1 << 10) -+#define RHF_REQUICKSTARTED (1 << 11) -+#define RHF_CORD (1 << 12) -+#define RHF_NO_UNRES_UNDEF (1 << 13) -+#define RHF_RLD_ORDER_SAFE (1 << 14) -+ -+/* Entries found in sections of type SHT_MIPS_LIBLIST. */ -+ -+typedef struct -+{ -+ Elf32_Word l_name; /* Name (string table index) */ -+ Elf32_Word l_time_stamp; /* Timestamp */ -+ Elf32_Word l_checksum; /* Checksum */ -+ Elf32_Word l_version; /* Interface version */ -+ Elf32_Word l_flags; /* Flags */ -+} Elf32_Lib; -+ -+typedef struct -+{ -+ Elf64_Word l_name; /* Name (string table index) */ -+ Elf64_Word l_time_stamp; /* Timestamp */ -+ Elf64_Word l_checksum; /* Checksum */ -+ Elf64_Word l_version; /* Interface version */ -+ Elf64_Word l_flags; /* Flags */ -+} Elf64_Lib; -+ -+ -+/* Legal values for l_flags. */ -+ -+#define LL_NONE 0 -+#define LL_EXACT_MATCH (1 << 0) /* Require exact match */ -+#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */ -+#define LL_REQUIRE_MINOR (1 << 2) -+#define LL_EXPORTS (1 << 3) -+#define LL_DELAY_LOAD (1 << 4) -+#define LL_DELTA (1 << 5) -+ -+/* Entries found in sections of type SHT_MIPS_CONFLICT. */ -+ -+typedef Elf32_Addr Elf32_Conflict; -+ -+ -+/* HPPA specific definitions. */ -+ -+/* Legal values for e_flags field of Elf32_Ehdr. */ -+ -+#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */ -+#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */ -+#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */ -+#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */ -+#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch -+ prediction. */ -+#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */ -+#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */ -+ -+/* Defined values for `e_flags & EF_PARISC_ARCH' are: */ -+ -+#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */ -+#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */ -+#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */ -+ -+/* Additional section indeces. */ -+ -+#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared -+ symbols in ANSI C. */ -+#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */ -+ -+/* Legal values for sh_type field of Elf32_Shdr. */ -+ -+#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */ -+#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */ -+#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */ -+ -+/* Legal values for sh_flags field of Elf32_Shdr. */ -+ -+#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */ -+#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */ -+#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */ -+ -+/* Legal values for ST_TYPE subfield of st_info (symbol type). */ -+ -+#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */ -+ -+#define STT_HP_OPAQUE (STT_LOOS + 0x1) -+#define STT_HP_STUB (STT_LOOS + 0x2) -+ -+/* HPPA relocs. */ -+ -+#define R_PARISC_NONE 0 /* No reloc. */ -+#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */ -+#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */ -+#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */ -+#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */ -+#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */ -+#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */ -+#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */ -+#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */ -+#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */ -+#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */ -+#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */ -+#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */ -+#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */ -+#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */ -+#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */ -+#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */ -+#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */ -+#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */ -+#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */ -+#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */ -+#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */ -+#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */ -+#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */ -+#define R_PARISC_FPTR64 64 /* 64 bits function address. */ -+#define R_PARISC_PLABEL32 65 /* 32 bits function address. */ -+#define R_PARISC_PLABEL21L 66 /* Left 21 bits of fdesc address. */ -+#define R_PARISC_PLABEL14R 70 /* Right 14 bits of fdesc address. */ -+#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */ -+#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */ -+#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */ -+#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */ -+#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */ -+#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */ -+#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */ -+#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */ -+#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */ -+#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */ -+#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */ -+#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */ -+#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */ -+#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */ -+#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */ -+#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */ -+#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */ -+#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */ -+#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */ -+#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */ -+#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */ -+#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */ -+#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */ -+#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */ -+#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */ -+#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */ -+#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */ -+#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */ -+#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */ -+#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */ -+#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */ -+#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */ -+#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */ -+#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */ -+#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */ -+#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */ -+#define R_PARISC_LORESERVE 128 -+#define R_PARISC_COPY 128 /* Copy relocation. */ -+#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */ -+#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */ -+#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */ -+#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */ -+#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */ -+#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/ -+#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */ -+#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */ -+#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */ -+#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */ -+#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */ -+#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */ -+#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */ -+#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */ -+#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/ -+#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/ -+#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */ -+#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */ -+#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */ -+#define R_PARISC_GNU_VTENTRY 232 -+#define R_PARISC_GNU_VTINHERIT 233 -+#define R_PARISC_TLS_GD21L 234 /* GD 21-bit left. */ -+#define R_PARISC_TLS_GD14R 235 /* GD 14-bit right. */ -+#define R_PARISC_TLS_GDCALL 236 /* GD call to __t_g_a. */ -+#define R_PARISC_TLS_LDM21L 237 /* LD module 21-bit left. */ -+#define R_PARISC_TLS_LDM14R 238 /* LD module 14-bit right. */ -+#define R_PARISC_TLS_LDMCALL 239 /* LD module call to __t_g_a. */ -+#define R_PARISC_TLS_LDO21L 240 /* LD offset 21-bit left. */ -+#define R_PARISC_TLS_LDO14R 241 /* LD offset 14-bit right. */ -+#define R_PARISC_TLS_DTPMOD32 242 /* DTP module 32-bit. */ -+#define R_PARISC_TLS_DTPMOD64 243 /* DTP module 64-bit. */ -+#define R_PARISC_TLS_DTPOFF32 244 /* DTP offset 32-bit. */ -+#define R_PARISC_TLS_DTPOFF64 245 /* DTP offset 32-bit. */ -+#define R_PARISC_TLS_LE21L R_PARISC_TPREL21L -+#define R_PARISC_TLS_LE14R R_PARISC_TPREL14R -+#define R_PARISC_TLS_IE21L R_PARISC_LTOFF_TP21L -+#define R_PARISC_TLS_IE14R R_PARISC_LTOFF_TP14R -+#define R_PARISC_TLS_TPREL32 R_PARISC_TPREL32 -+#define R_PARISC_TLS_TPREL64 R_PARISC_TPREL64 -+#define R_PARISC_HIRESERVE 255 -+ -+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */ -+ -+#define PT_HP_TLS (PT_LOOS + 0x0) -+#define PT_HP_CORE_NONE (PT_LOOS + 0x1) -+#define PT_HP_CORE_VERSION (PT_LOOS + 0x2) -+#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3) -+#define PT_HP_CORE_COMM (PT_LOOS + 0x4) -+#define PT_HP_CORE_PROC (PT_LOOS + 0x5) -+#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6) -+#define PT_HP_CORE_STACK (PT_LOOS + 0x7) -+#define PT_HP_CORE_SHM (PT_LOOS + 0x8) -+#define PT_HP_CORE_MMF (PT_LOOS + 0x9) -+#define PT_HP_PARALLEL (PT_LOOS + 0x10) -+#define PT_HP_FASTBIND (PT_LOOS + 0x11) -+#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12) -+#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13) -+#define PT_HP_STACK (PT_LOOS + 0x14) -+ -+#define PT_PARISC_ARCHEXT 0x70000000 -+#define PT_PARISC_UNWIND 0x70000001 -+ -+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */ -+ -+#define PF_PARISC_SBP 0x08000000 -+ -+#define PF_HP_PAGE_SIZE 0x00100000 -+#define PF_HP_FAR_SHARED 0x00200000 -+#define PF_HP_NEAR_SHARED 0x00400000 -+#define PF_HP_CODE 0x01000000 -+#define PF_HP_MODIFY 0x02000000 -+#define PF_HP_LAZYSWAP 0x04000000 -+#define PF_HP_SBP 0x08000000 -+ -+ -+/* Alpha specific definitions. */ -+ -+/* Legal values for e_flags field of Elf64_Ehdr. */ -+ -+#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */ -+#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */ -+ -+/* Legal values for sh_type field of Elf64_Shdr. */ -+ -+/* These two are primerily concerned with ECOFF debugging info. */ -+#define SHT_ALPHA_DEBUG 0x70000001 -+#define SHT_ALPHA_REGINFO 0x70000002 -+ -+/* Legal values for sh_flags field of Elf64_Shdr. */ -+ -+#define SHF_ALPHA_GPREL 0x10000000 -+ -+/* Legal values for st_other field of Elf64_Sym. */ -+#define STO_ALPHA_NOPV 0x80 /* No PV required. */ -+#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */ -+ -+/* Alpha relocs. */ -+ -+#define R_ALPHA_NONE 0 /* No reloc */ -+#define R_ALPHA_REFLONG 1 /* Direct 32 bit */ -+#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */ -+#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */ -+#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */ -+#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */ -+#define R_ALPHA_GPDISP 6 /* Add displacement to GP */ -+#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */ -+#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */ -+#define R_ALPHA_SREL16 9 /* PC relative 16 bit */ -+#define R_ALPHA_SREL32 10 /* PC relative 32 bit */ -+#define R_ALPHA_SREL64 11 /* PC relative 64 bit */ -+#define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */ -+#define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */ -+#define R_ALPHA_GPREL16 19 /* GP relative 16 bit */ -+#define R_ALPHA_COPY 24 /* Copy symbol at runtime */ -+#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */ -+#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */ -+#define R_ALPHA_RELATIVE 27 /* Adjust by program base */ -+#define R_ALPHA_TLS_GD_HI 28 -+#define R_ALPHA_TLSGD 29 -+#define R_ALPHA_TLS_LDM 30 -+#define R_ALPHA_DTPMOD64 31 -+#define R_ALPHA_GOTDTPREL 32 -+#define R_ALPHA_DTPREL64 33 -+#define R_ALPHA_DTPRELHI 34 -+#define R_ALPHA_DTPRELLO 35 -+#define R_ALPHA_DTPREL16 36 -+#define R_ALPHA_GOTTPREL 37 -+#define R_ALPHA_TPREL64 38 -+#define R_ALPHA_TPRELHI 39 -+#define R_ALPHA_TPRELLO 40 -+#define R_ALPHA_TPREL16 41 -+/* Keep this the last entry. */ -+#define R_ALPHA_NUM 46 -+ -+/* Magic values of the LITUSE relocation addend. */ -+#define LITUSE_ALPHA_ADDR 0 -+#define LITUSE_ALPHA_BASE 1 -+#define LITUSE_ALPHA_BYTOFF 2 -+#define LITUSE_ALPHA_JSR 3 -+#define LITUSE_ALPHA_TLS_GD 4 -+#define LITUSE_ALPHA_TLS_LDM 5 -+ -+/* Legal values for d_tag of Elf64_Dyn. */ -+#define DT_ALPHA_PLTRO (DT_LOPROC + 0) -+#define DT_ALPHA_NUM 1 -+ -+/* PowerPC specific declarations */ -+ -+/* Values for Elf32/64_Ehdr.e_flags. */ -+#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */ -+ -+/* Cygnus local bits below */ -+#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/ -+#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib -+ flag */ -+ -+/* PowerPC relocations defined by the ABIs */ -+#define R_PPC_NONE 0 -+#define R_PPC_ADDR32 1 /* 32bit absolute address */ -+#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ -+#define R_PPC_ADDR16 3 /* 16bit absolute address */ -+#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ -+#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ -+#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ -+#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ -+#define R_PPC_ADDR14_BRTAKEN 8 -+#define R_PPC_ADDR14_BRNTAKEN 9 -+#define R_PPC_REL24 10 /* PC relative 26 bit */ -+#define R_PPC_REL14 11 /* PC relative 16 bit */ -+#define R_PPC_REL14_BRTAKEN 12 -+#define R_PPC_REL14_BRNTAKEN 13 -+#define R_PPC_GOT16 14 -+#define R_PPC_GOT16_LO 15 -+#define R_PPC_GOT16_HI 16 -+#define R_PPC_GOT16_HA 17 -+#define R_PPC_PLTREL24 18 -+#define R_PPC_COPY 19 -+#define R_PPC_GLOB_DAT 20 -+#define R_PPC_JMP_SLOT 21 -+#define R_PPC_RELATIVE 22 -+#define R_PPC_LOCAL24PC 23 -+#define R_PPC_UADDR32 24 -+#define R_PPC_UADDR16 25 -+#define R_PPC_REL32 26 -+#define R_PPC_PLT32 27 -+#define R_PPC_PLTREL32 28 -+#define R_PPC_PLT16_LO 29 -+#define R_PPC_PLT16_HI 30 -+#define R_PPC_PLT16_HA 31 -+#define R_PPC_SDAREL16 32 -+#define R_PPC_SECTOFF 33 -+#define R_PPC_SECTOFF_LO 34 -+#define R_PPC_SECTOFF_HI 35 -+#define R_PPC_SECTOFF_HA 36 -+ -+/* PowerPC relocations defined for the TLS access ABI. */ -+#define R_PPC_TLS 67 /* none (sym+add)@tls */ -+#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */ -+#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */ -+#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -+#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -+#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -+#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */ -+#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */ -+#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -+#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -+#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -+#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */ -+#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -+#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -+#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -+#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -+#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -+#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -+#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -+#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -+#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */ -+#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */ -+#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -+#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -+#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */ -+#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */ -+#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */ -+#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */ -+ -+/* The remaining relocs are from the Embedded ELF ABI, and are not -+ in the SVR4 ELF ABI. */ -+#define R_PPC_EMB_NADDR32 101 -+#define R_PPC_EMB_NADDR16 102 -+#define R_PPC_EMB_NADDR16_LO 103 -+#define R_PPC_EMB_NADDR16_HI 104 -+#define R_PPC_EMB_NADDR16_HA 105 -+#define R_PPC_EMB_SDAI16 106 -+#define R_PPC_EMB_SDA2I16 107 -+#define R_PPC_EMB_SDA2REL 108 -+#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */ -+#define R_PPC_EMB_MRKREF 110 -+#define R_PPC_EMB_RELSEC16 111 -+#define R_PPC_EMB_RELST_LO 112 -+#define R_PPC_EMB_RELST_HI 113 -+#define R_PPC_EMB_RELST_HA 114 -+#define R_PPC_EMB_BIT_FLD 115 -+#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */ -+ -+/* Diab tool relocations. */ -+#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */ -+#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */ -+#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */ -+#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */ -+#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */ -+#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */ -+ -+/* GNU extension to support local ifunc. */ -+#define R_PPC_IRELATIVE 248 -+ -+/* GNU relocs used in PIC code sequences. */ -+#define R_PPC_REL16 249 /* half16 (sym+add-.) */ -+#define R_PPC_REL16_LO 250 /* half16 (sym+add-.)@l */ -+#define R_PPC_REL16_HI 251 /* half16 (sym+add-.)@h */ -+#define R_PPC_REL16_HA 252 /* half16 (sym+add-.)@ha */ -+ -+/* This is a phony reloc to handle any old fashioned TOC16 references -+ that may still be in object files. */ -+#define R_PPC_TOC16 255 -+ -+/* PowerPC specific values for the Dyn d_tag field. */ -+#define DT_PPC_GOT (DT_LOPROC + 0) -+#define DT_PPC_NUM 1 -+ -+/* PowerPC64 relocations defined by the ABIs */ -+#define R_PPC64_NONE R_PPC_NONE -+#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address */ -+#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned */ -+#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address */ -+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of address */ -+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of address. */ -+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */ -+#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned */ -+#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN -+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN -+#define R_PPC64_REL24 R_PPC_REL24 /* PC-rel. 26 bit, word aligned */ -+#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit */ -+#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN -+#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN -+#define R_PPC64_GOT16 R_PPC_GOT16 -+#define R_PPC64_GOT16_LO R_PPC_GOT16_LO -+#define R_PPC64_GOT16_HI R_PPC_GOT16_HI -+#define R_PPC64_GOT16_HA R_PPC_GOT16_HA -+ -+#define R_PPC64_COPY R_PPC_COPY -+#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT -+#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT -+#define R_PPC64_RELATIVE R_PPC_RELATIVE -+ -+#define R_PPC64_UADDR32 R_PPC_UADDR32 -+#define R_PPC64_UADDR16 R_PPC_UADDR16 -+#define R_PPC64_REL32 R_PPC_REL32 -+#define R_PPC64_PLT32 R_PPC_PLT32 -+#define R_PPC64_PLTREL32 R_PPC_PLTREL32 -+#define R_PPC64_PLT16_LO R_PPC_PLT16_LO -+#define R_PPC64_PLT16_HI R_PPC_PLT16_HI -+#define R_PPC64_PLT16_HA R_PPC_PLT16_HA -+ -+#define R_PPC64_SECTOFF R_PPC_SECTOFF -+#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO -+#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI -+#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA -+#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2 */ -+#define R_PPC64_ADDR64 38 /* doubleword64 S + A */ -+#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A) */ -+#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A) */ -+#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A) */ -+#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A) */ -+#define R_PPC64_UADDR64 43 /* doubleword64 S + A */ -+#define R_PPC64_REL64 44 /* doubleword64 S + A - P */ -+#define R_PPC64_PLT64 45 /* doubleword64 L + A */ -+#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P */ -+#define R_PPC64_TOC16 47 /* half16* S + A - .TOC */ -+#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.) */ -+#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.) */ -+#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.) */ -+#define R_PPC64_TOC 51 /* doubleword64 .TOC */ -+#define R_PPC64_PLTGOT16 52 /* half16* M + A */ -+#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A) */ -+#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A) */ -+#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A) */ -+ -+#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2 */ -+#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2 */ -+#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2 */ -+#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2 */ -+#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2 */ -+#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2 */ -+#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2 */ -+#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2 */ -+#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2 */ -+#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2 */ -+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2 */ -+ -+/* PowerPC64 relocations defined for the TLS access ABI. */ -+#define R_PPC64_TLS 67 /* none (sym+add)@tls */ -+#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */ -+#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */ -+#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -+#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -+#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -+#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */ -+#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */ -+#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -+#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -+#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -+#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */ -+#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -+#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -+#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -+#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -+#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -+#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -+#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -+#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -+#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */ -+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */ -+#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -+#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -+#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */ -+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */ -+#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */ -+#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */ -+#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */ -+#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */ -+#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */ -+#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */ -+#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */ -+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */ -+#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */ -+#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */ -+#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */ -+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ -+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ -+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ -+ -+/* GNU extension to support local ifunc. */ -+#define R_PPC64_JMP_IREL 247 -+#define R_PPC64_IRELATIVE 248 -+#define R_PPC64_REL16 249 /* half16 (sym+add-.) */ -+#define R_PPC64_REL16_LO 250 /* half16 (sym+add-.)@l */ -+#define R_PPC64_REL16_HI 251 /* half16 (sym+add-.)@h */ -+#define R_PPC64_REL16_HA 252 /* half16 (sym+add-.)@ha */ -+ -+/* PowerPC64 specific values for the Dyn d_tag field. */ -+#define DT_PPC64_GLINK (DT_LOPROC + 0) -+#define DT_PPC64_OPD (DT_LOPROC + 1) -+#define DT_PPC64_OPDSZ (DT_LOPROC + 2) -+#define DT_PPC64_NUM 3 -+ -+ -+/* ARM specific declarations */ -+ -+/* Processor specific flags for the ELF header e_flags field. */ -+#define EF_ARM_RELEXEC 0x01 -+#define EF_ARM_HASENTRY 0x02 -+#define EF_ARM_INTERWORK 0x04 -+#define EF_ARM_APCS_26 0x08 -+#define EF_ARM_APCS_FLOAT 0x10 -+#define EF_ARM_PIC 0x20 -+#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */ -+#define EF_ARM_NEW_ABI 0x80 -+#define EF_ARM_OLD_ABI 0x100 -+#define EF_ARM_SOFT_FLOAT 0x200 -+#define EF_ARM_VFP_FLOAT 0x400 -+#define EF_ARM_MAVERICK_FLOAT 0x800 -+ -+ -+/* Other constants defined in the ARM ELF spec. version B-01. */ -+/* NB. These conflict with values defined above. */ -+#define EF_ARM_SYMSARESORTED 0x04 -+#define EF_ARM_DYNSYMSUSESEGIDX 0x08 -+#define EF_ARM_MAPSYMSFIRST 0x10 -+#define EF_ARM_EABIMASK 0XFF000000 -+ -+/* Constants defined in AAELF. */ -+#define EF_ARM_BE8 0x00800000 -+#define EF_ARM_LE8 0x00400000 -+ -+#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK) -+#define EF_ARM_EABI_UNKNOWN 0x00000000 -+#define EF_ARM_EABI_VER1 0x01000000 -+#define EF_ARM_EABI_VER2 0x02000000 -+#define EF_ARM_EABI_VER3 0x03000000 -+#define EF_ARM_EABI_VER4 0x04000000 -+#define EF_ARM_EABI_VER5 0x05000000 -+ -+/* Additional symbol types for Thumb. */ -+#define STT_ARM_TFUNC STT_LOPROC /* A Thumb function. */ -+#define STT_ARM_16BIT STT_HIPROC /* A Thumb label. */ -+ -+/* ARM-specific values for sh_flags */ -+#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */ -+#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined -+ in the input to a link step. */ -+ -+/* ARM-specific program header flags */ -+#define PF_ARM_SB 0x10000000 /* Segment contains the location -+ addressed by the static base. */ -+#define PF_ARM_PI 0x20000000 /* Position-independent segment. */ -+#define PF_ARM_ABS 0x40000000 /* Absolute segment. */ -+ -+/* Processor specific values for the Phdr p_type field. */ -+#define PT_ARM_EXIDX (PT_LOPROC + 1) /* ARM unwind segment. */ -+ -+/* Processor specific values for the Shdr sh_type field. */ -+#define SHT_ARM_EXIDX (SHT_LOPROC + 1) /* ARM unwind section. */ -+#define SHT_ARM_PREEMPTMAP (SHT_LOPROC + 2) /* Preemption details. */ -+#define SHT_ARM_ATTRIBUTES (SHT_LOPROC + 3) /* ARM attributes section. */ -+ -+ -+/* ARM relocs. */ -+ -+#define R_ARM_NONE 0 /* No reloc */ -+#define R_ARM_PC24 1 /* PC relative 26 bit branch */ -+#define R_ARM_ABS32 2 /* Direct 32 bit */ -+#define R_ARM_REL32 3 /* PC relative 32 bit */ -+#define R_ARM_PC13 4 -+#define R_ARM_ABS16 5 /* Direct 16 bit */ -+#define R_ARM_ABS12 6 /* Direct 12 bit */ -+#define R_ARM_THM_ABS5 7 -+#define R_ARM_ABS8 8 /* Direct 8 bit */ -+#define R_ARM_SBREL32 9 -+#define R_ARM_THM_PC22 10 -+#define R_ARM_THM_PC8 11 -+#define R_ARM_AMP_VCALL9 12 -+#define R_ARM_SWI24 13 /* Obsolete static relocation. */ -+#define R_ARM_TLS_DESC 13 /* Dynamic relocation. */ -+#define R_ARM_THM_SWI8 14 -+#define R_ARM_XPC25 15 -+#define R_ARM_THM_XPC22 16 -+#define R_ARM_TLS_DTPMOD32 17 /* ID of module containing symbol */ -+#define R_ARM_TLS_DTPOFF32 18 /* Offset in TLS block */ -+#define R_ARM_TLS_TPOFF32 19 /* Offset in static TLS block */ -+#define R_ARM_COPY 20 /* Copy symbol at runtime */ -+#define R_ARM_GLOB_DAT 21 /* Create GOT entry */ -+#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */ -+#define R_ARM_RELATIVE 23 /* Adjust by program base */ -+#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */ -+#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */ -+#define R_ARM_GOT32 26 /* 32 bit GOT entry */ -+#define R_ARM_PLT32 27 /* 32 bit PLT address */ -+#define R_ARM_ALU_PCREL_7_0 32 -+#define R_ARM_ALU_PCREL_15_8 33 -+#define R_ARM_ALU_PCREL_23_15 34 -+#define R_ARM_LDR_SBREL_11_0 35 -+#define R_ARM_ALU_SBREL_19_12 36 -+#define R_ARM_ALU_SBREL_27_20 37 -+#define R_ARM_TLS_GOTDESC 90 -+#define R_ARM_TLS_CALL 91 -+#define R_ARM_TLS_DESCSEQ 92 -+#define R_ARM_THM_TLS_CALL 93 -+#define R_ARM_GNU_VTENTRY 100 -+#define R_ARM_GNU_VTINHERIT 101 -+#define R_ARM_THM_PC11 102 /* thumb unconditional branch */ -+#define R_ARM_THM_PC9 103 /* thumb conditional branch */ -+#define R_ARM_TLS_GD32 104 /* PC-rel 32 bit for global dynamic -+ thread local data */ -+#define R_ARM_TLS_LDM32 105 /* PC-rel 32 bit for local dynamic -+ thread local data */ -+#define R_ARM_TLS_LDO32 106 /* 32 bit offset relative to TLS -+ block */ -+#define R_ARM_TLS_IE32 107 /* PC-rel 32 bit for GOT entry of -+ static TLS block offset */ -+#define R_ARM_TLS_LE32 108 /* 32 bit offset relative to static -+ TLS block */ -+#define R_ARM_THM_TLS_DESCSEQ 129 -+#define R_ARM_IRELATIVE 160 -+#define R_ARM_RXPC25 249 -+#define R_ARM_RSBREL32 250 -+#define R_ARM_THM_RPC22 251 -+#define R_ARM_RREL32 252 -+#define R_ARM_RABS22 253 -+#define R_ARM_RPC24 254 -+#define R_ARM_RBASE 255 -+/* Keep this the last entry. */ -+#define R_ARM_NUM 256 -+ -+/* IA-64 specific declarations. */ -+ -+/* Processor specific flags for the Ehdr e_flags field. */ -+#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */ -+#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */ -+#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */ -+ -+/* Processor specific values for the Phdr p_type field. */ -+#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */ -+#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */ -+#define PT_IA_64_HP_OPT_ANOT (PT_LOOS + 0x12) -+#define PT_IA_64_HP_HSL_ANOT (PT_LOOS + 0x13) -+#define PT_IA_64_HP_STACK (PT_LOOS + 0x14) -+ -+/* Processor specific flags for the Phdr p_flags field. */ -+#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */ -+ -+/* Processor specific values for the Shdr sh_type field. */ -+#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */ -+#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */ -+ -+/* Processor specific flags for the Shdr sh_flags field. */ -+#define SHF_IA_64_SHORT 0x10000000 /* section near gp */ -+#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */ -+ -+/* Processor specific values for the Dyn d_tag field. */ -+#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0) -+#define DT_IA_64_NUM 1 -+ -+/* IA-64 relocations. */ -+#define R_IA64_NONE 0x00 /* none */ -+#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */ -+#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */ -+#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */ -+#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */ -+#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */ -+#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */ -+#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */ -+#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */ -+#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */ -+#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */ -+#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */ -+#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */ -+#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */ -+#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */ -+#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */ -+#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */ -+#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */ -+#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */ -+#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */ -+#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */ -+#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */ -+#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */ -+#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */ -+#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */ -+#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */ -+#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */ -+#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */ -+#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */ -+#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */ -+#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */ -+#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */ -+#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */ -+#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */ -+#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */ -+#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */ -+#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */ -+#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */ -+#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */ -+#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */ -+#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */ -+#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */ -+#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */ -+#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */ -+#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */ -+#define R_IA64_REL32MSB 0x6c /* data 4 + REL */ -+#define R_IA64_REL32LSB 0x6d /* data 4 + REL */ -+#define R_IA64_REL64MSB 0x6e /* data 8 + REL */ -+#define R_IA64_REL64LSB 0x6f /* data 8 + REL */ -+#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */ -+#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */ -+#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */ -+#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */ -+#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */ -+#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */ -+#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */ -+#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */ -+#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */ -+#define R_IA64_COPY 0x84 /* copy relocation */ -+#define R_IA64_SUB 0x85 /* Addend and symbol difference */ -+#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */ -+#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */ -+#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */ -+#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */ -+#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */ -+#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */ -+#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */ -+#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */ -+#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */ -+#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */ -+#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */ -+#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */ -+#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */ -+#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */ -+#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */ -+#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */ -+ -+/* SH specific declarations */ -+ -+/* Processor specific flags for the ELF header e_flags field. */ -+#define EF_SH_MACH_MASK 0x1f -+#define EF_SH_UNKNOWN 0x0 -+#define EF_SH1 0x1 -+#define EF_SH2 0x2 -+#define EF_SH3 0x3 -+#define EF_SH_DSP 0x4 -+#define EF_SH3_DSP 0x5 -+#define EF_SH4AL_DSP 0x6 -+#define EF_SH3E 0x8 -+#define EF_SH4 0x9 -+#define EF_SH2E 0xb -+#define EF_SH4A 0xc -+#define EF_SH2A 0xd -+#define EF_SH4_NOFPU 0x10 -+#define EF_SH4A_NOFPU 0x11 -+#define EF_SH4_NOMMU_NOFPU 0x12 -+#define EF_SH2A_NOFPU 0x13 -+#define EF_SH3_NOMMU 0x14 -+#define EF_SH2A_SH4_NOFPU 0x15 -+#define EF_SH2A_SH3_NOFPU 0x16 -+#define EF_SH2A_SH4 0x17 -+#define EF_SH2A_SH3E 0x18 -+ -+/* SH relocs. */ -+#define R_SH_NONE 0 -+#define R_SH_DIR32 1 -+#define R_SH_REL32 2 -+#define R_SH_DIR8WPN 3 -+#define R_SH_IND12W 4 -+#define R_SH_DIR8WPL 5 -+#define R_SH_DIR8WPZ 6 -+#define R_SH_DIR8BP 7 -+#define R_SH_DIR8W 8 -+#define R_SH_DIR8L 9 -+#define R_SH_SWITCH16 25 -+#define R_SH_SWITCH32 26 -+#define R_SH_USES 27 -+#define R_SH_COUNT 28 -+#define R_SH_ALIGN 29 -+#define R_SH_CODE 30 -+#define R_SH_DATA 31 -+#define R_SH_LABEL 32 -+#define R_SH_SWITCH8 33 -+#define R_SH_GNU_VTINHERIT 34 -+#define R_SH_GNU_VTENTRY 35 -+#define R_SH_TLS_GD_32 144 -+#define R_SH_TLS_LD_32 145 -+#define R_SH_TLS_LDO_32 146 -+#define R_SH_TLS_IE_32 147 -+#define R_SH_TLS_LE_32 148 -+#define R_SH_TLS_DTPMOD32 149 -+#define R_SH_TLS_DTPOFF32 150 -+#define R_SH_TLS_TPOFF32 151 -+#define R_SH_GOT32 160 -+#define R_SH_PLT32 161 -+#define R_SH_COPY 162 -+#define R_SH_GLOB_DAT 163 -+#define R_SH_JMP_SLOT 164 -+#define R_SH_RELATIVE 165 -+#define R_SH_GOTOFF 166 -+#define R_SH_GOTPC 167 -+/* Keep this the last entry. */ -+#define R_SH_NUM 256 -+ -+/* S/390 specific definitions. */ -+ -+/* Valid values for the e_flags field. */ -+ -+#define EF_S390_HIGH_GPRS 0x00000001 /* High GPRs kernel facility needed. */ -+ -+/* Additional s390 relocs */ -+ -+#define R_390_NONE 0 /* No reloc. */ -+#define R_390_8 1 /* Direct 8 bit. */ -+#define R_390_12 2 /* Direct 12 bit. */ -+#define R_390_16 3 /* Direct 16 bit. */ -+#define R_390_32 4 /* Direct 32 bit. */ -+#define R_390_PC32 5 /* PC relative 32 bit. */ -+#define R_390_GOT12 6 /* 12 bit GOT offset. */ -+#define R_390_GOT32 7 /* 32 bit GOT offset. */ -+#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */ -+#define R_390_COPY 9 /* Copy symbol at runtime. */ -+#define R_390_GLOB_DAT 10 /* Create GOT entry. */ -+#define R_390_JMP_SLOT 11 /* Create PLT entry. */ -+#define R_390_RELATIVE 12 /* Adjust by program base. */ -+#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */ -+#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */ -+#define R_390_GOT16 15 /* 16 bit GOT offset. */ -+#define R_390_PC16 16 /* PC relative 16 bit. */ -+#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */ -+#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */ -+#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */ -+#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */ -+#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */ -+#define R_390_64 22 /* Direct 64 bit. */ -+#define R_390_PC64 23 /* PC relative 64 bit. */ -+#define R_390_GOT64 24 /* 64 bit GOT offset. */ -+#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */ -+#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */ -+#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */ -+#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */ -+#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */ -+#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */ -+#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */ -+#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */ -+#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */ -+#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */ -+#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */ -+#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */ -+#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */ -+#define R_390_TLS_GDCALL 38 /* Tag for function call in general -+ dynamic TLS code. */ -+#define R_390_TLS_LDCALL 39 /* Tag for function call in local -+ dynamic TLS code. */ -+#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic -+ thread local data. */ -+#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic -+ thread local data. */ -+#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic -+ thread local data in LE code. */ -+#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic -+ thread local data in LE code. */ -+#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for -+ negated static TLS block offset. */ -+#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for -+ negated static TLS block offset. */ -+#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for -+ negated static TLS block offset. */ -+#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to -+ static TLS block. */ -+#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to -+ static TLS block. */ -+#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS -+ block. */ -+#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS -+ block. */ -+#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */ -+#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */ -+#define R_390_TLS_TPOFF 56 /* Negated offset in static TLS -+ block. */ -+#define R_390_20 57 /* Direct 20 bit. */ -+#define R_390_GOT20 58 /* 20 bit GOT offset. */ -+#define R_390_GOTPLT20 59 /* 20 bit offset to jump slot. */ -+#define R_390_TLS_GOTIE20 60 /* 20 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_IRELATIVE 61 /* STT_GNU_IFUNC relocation. */ -+/* Keep this the last entry. */ -+#define R_390_NUM 62 -+ -+ -+/* CRIS relocations. */ -+#define R_CRIS_NONE 0 -+#define R_CRIS_8 1 -+#define R_CRIS_16 2 -+#define R_CRIS_32 3 -+#define R_CRIS_8_PCREL 4 -+#define R_CRIS_16_PCREL 5 -+#define R_CRIS_32_PCREL 6 -+#define R_CRIS_GNU_VTINHERIT 7 -+#define R_CRIS_GNU_VTENTRY 8 -+#define R_CRIS_COPY 9 -+#define R_CRIS_GLOB_DAT 10 -+#define R_CRIS_JUMP_SLOT 11 -+#define R_CRIS_RELATIVE 12 -+#define R_CRIS_16_GOT 13 -+#define R_CRIS_32_GOT 14 -+#define R_CRIS_16_GOTPLT 15 -+#define R_CRIS_32_GOTPLT 16 -+#define R_CRIS_32_GOTREL 17 -+#define R_CRIS_32_PLT_GOTREL 18 -+#define R_CRIS_32_PLT_PCREL 19 -+ -+#define R_CRIS_NUM 20 -+ -+ -+/* AMD x86-64 relocations. */ -+#define R_X86_64_NONE 0 /* No reloc */ -+#define R_X86_64_64 1 /* Direct 64 bit */ -+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */ -+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */ -+#define R_X86_64_PLT32 4 /* 32 bit PLT address */ -+#define R_X86_64_COPY 5 /* Copy symbol at runtime */ -+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */ -+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */ -+#define R_X86_64_RELATIVE 8 /* Adjust by program base */ -+#define R_X86_64_GOTPCREL 9 /* 32 bit signed PC relative -+ offset to GOT */ -+#define R_X86_64_32 10 /* Direct 32 bit zero extended */ -+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */ -+#define R_X86_64_16 12 /* Direct 16 bit zero extended */ -+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */ -+#define R_X86_64_8 14 /* Direct 8 bit sign extended */ -+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */ -+#define R_X86_64_DTPMOD64 16 /* ID of module containing symbol */ -+#define R_X86_64_DTPOFF64 17 /* Offset in module's TLS block */ -+#define R_X86_64_TPOFF64 18 /* Offset in initial TLS block */ -+#define R_X86_64_TLSGD 19 /* 32 bit signed PC relative offset -+ to two GOT entries for GD symbol */ -+#define R_X86_64_TLSLD 20 /* 32 bit signed PC relative offset -+ to two GOT entries for LD symbol */ -+#define R_X86_64_DTPOFF32 21 /* Offset in TLS block */ -+#define R_X86_64_GOTTPOFF 22 /* 32 bit signed PC relative offset -+ to GOT entry for IE symbol */ -+#define R_X86_64_TPOFF32 23 /* Offset in initial TLS block */ -+#define R_X86_64_PC64 24 /* PC relative 64 bit */ -+#define R_X86_64_GOTOFF64 25 /* 64 bit offset to GOT */ -+#define R_X86_64_GOTPC32 26 /* 32 bit signed pc relative -+ offset to GOT */ -+#define R_X86_64_GOT64 27 /* 64-bit GOT entry offset */ -+#define R_X86_64_GOTPCREL64 28 /* 64-bit PC relative offset -+ to GOT entry */ -+#define R_X86_64_GOTPC64 29 /* 64-bit PC relative offset to GOT */ -+#define R_X86_64_GOTPLT64 30 /* like GOT64, says PLT entry needed */ -+#define R_X86_64_PLTOFF64 31 /* 64-bit GOT relative offset -+ to PLT entry */ -+#define R_X86_64_SIZE32 32 /* Size of symbol plus 32-bit addend */ -+#define R_X86_64_SIZE64 33 /* Size of symbol plus 64-bit addend */ -+#define R_X86_64_GOTPC32_TLSDESC 34 /* GOT offset for TLS descriptor. */ -+#define R_X86_64_TLSDESC_CALL 35 /* Marker for call through TLS -+ descriptor. */ -+#define R_X86_64_TLSDESC 36 /* TLS descriptor. */ -+#define R_X86_64_IRELATIVE 37 /* Adjust indirectly by program base */ -+#define R_X86_64_RELATIVE64 38 /* 64-bit adjust by program base */ -+ -+#define R_X86_64_NUM 39 -+ -+ -+/* AM33 relocations. */ -+#define R_MN10300_NONE 0 /* No reloc. */ -+#define R_MN10300_32 1 /* Direct 32 bit. */ -+#define R_MN10300_16 2 /* Direct 16 bit. */ -+#define R_MN10300_8 3 /* Direct 8 bit. */ -+#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ -+#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ -+#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ -+#define R_MN10300_GNU_VTINHERIT 7 /* Ancient C++ vtable garbage... */ -+#define R_MN10300_GNU_VTENTRY 8 /* ... collection annotation. */ -+#define R_MN10300_24 9 /* Direct 24 bit. */ -+#define R_MN10300_GOTPC32 10 /* 32-bit PCrel offset to GOT. */ -+#define R_MN10300_GOTPC16 11 /* 16-bit PCrel offset to GOT. */ -+#define R_MN10300_GOTOFF32 12 /* 32-bit offset from GOT. */ -+#define R_MN10300_GOTOFF24 13 /* 24-bit offset from GOT. */ -+#define R_MN10300_GOTOFF16 14 /* 16-bit offset from GOT. */ -+#define R_MN10300_PLT32 15 /* 32-bit PCrel to PLT entry. */ -+#define R_MN10300_PLT16 16 /* 16-bit PCrel to PLT entry. */ -+#define R_MN10300_GOT32 17 /* 32-bit offset to GOT entry. */ -+#define R_MN10300_GOT24 18 /* 24-bit offset to GOT entry. */ -+#define R_MN10300_GOT16 19 /* 16-bit offset to GOT entry. */ -+#define R_MN10300_COPY 20 /* Copy symbol at runtime. */ -+#define R_MN10300_GLOB_DAT 21 /* Create GOT entry. */ -+#define R_MN10300_JMP_SLOT 22 /* Create PLT entry. */ -+#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ -+ -+#define R_MN10300_NUM 24 -+ -+ -+/* M32R relocs. */ -+#define R_M32R_NONE 0 /* No reloc. */ -+#define R_M32R_16 1 /* Direct 16 bit. */ -+#define R_M32R_32 2 /* Direct 32 bit. */ -+#define R_M32R_24 3 /* Direct 24 bit. */ -+#define R_M32R_10_PCREL 4 /* PC relative 10 bit shifted. */ -+#define R_M32R_18_PCREL 5 /* PC relative 18 bit shifted. */ -+#define R_M32R_26_PCREL 6 /* PC relative 26 bit shifted. */ -+#define R_M32R_HI16_ULO 7 /* High 16 bit with unsigned low. */ -+#define R_M32R_HI16_SLO 8 /* High 16 bit with signed low. */ -+#define R_M32R_LO16 9 /* Low 16 bit. */ -+#define R_M32R_SDA16 10 /* 16 bit offset in SDA. */ -+#define R_M32R_GNU_VTINHERIT 11 -+#define R_M32R_GNU_VTENTRY 12 -+/* M32R relocs use SHT_RELA. */ -+#define R_M32R_16_RELA 33 /* Direct 16 bit. */ -+#define R_M32R_32_RELA 34 /* Direct 32 bit. */ -+#define R_M32R_24_RELA 35 /* Direct 24 bit. */ -+#define R_M32R_10_PCREL_RELA 36 /* PC relative 10 bit shifted. */ -+#define R_M32R_18_PCREL_RELA 37 /* PC relative 18 bit shifted. */ -+#define R_M32R_26_PCREL_RELA 38 /* PC relative 26 bit shifted. */ -+#define R_M32R_HI16_ULO_RELA 39 /* High 16 bit with unsigned low */ -+#define R_M32R_HI16_SLO_RELA 40 /* High 16 bit with signed low */ -+#define R_M32R_LO16_RELA 41 /* Low 16 bit */ -+#define R_M32R_SDA16_RELA 42 /* 16 bit offset in SDA */ -+#define R_M32R_RELA_GNU_VTINHERIT 43 -+#define R_M32R_RELA_GNU_VTENTRY 44 -+#define R_M32R_REL32 45 /* PC relative 32 bit. */ -+ -+#define R_M32R_GOT24 48 /* 24 bit GOT entry */ -+#define R_M32R_26_PLTREL 49 /* 26 bit PC relative to PLT shifted */ -+#define R_M32R_COPY 50 /* Copy symbol at runtime */ -+#define R_M32R_GLOB_DAT 51 /* Create GOT entry */ -+#define R_M32R_JMP_SLOT 52 /* Create PLT entry */ -+#define R_M32R_RELATIVE 53 /* Adjust by program base */ -+#define R_M32R_GOTOFF 54 /* 24 bit offset to GOT */ -+#define R_M32R_GOTPC24 55 /* 24 bit PC relative offset to GOT */ -+#define R_M32R_GOT16_HI_ULO 56 /* High 16 bit GOT entry with unsigned -+ low */ -+#define R_M32R_GOT16_HI_SLO 57 /* High 16 bit GOT entry with signed -+ low */ -+#define R_M32R_GOT16_LO 58 /* Low 16 bit GOT entry */ -+#define R_M32R_GOTPC_HI_ULO 59 /* High 16 bit PC relative offset to -+ GOT with unsigned low */ -+#define R_M32R_GOTPC_HI_SLO 60 /* High 16 bit PC relative offset to -+ GOT with signed low */ -+#define R_M32R_GOTPC_LO 61 /* Low 16 bit PC relative offset to -+ GOT */ -+#define R_M32R_GOTOFF_HI_ULO 62 /* High 16 bit offset to GOT -+ with unsigned low */ -+#define R_M32R_GOTOFF_HI_SLO 63 /* High 16 bit offset to GOT -+ with signed low */ -+#define R_M32R_GOTOFF_LO 64 /* Low 16 bit offset to GOT */ -+#define R_M32R_NUM 256 /* Keep this the last entry. */ -+ -+ -+/* TILEPro relocations. */ -+#define R_TILEPRO_NONE 0 /* No reloc */ -+#define R_TILEPRO_32 1 /* Direct 32 bit */ -+#define R_TILEPRO_16 2 /* Direct 16 bit */ -+#define R_TILEPRO_8 3 /* Direct 8 bit */ -+#define R_TILEPRO_32_PCREL 4 /* PC relative 32 bit */ -+#define R_TILEPRO_16_PCREL 5 /* PC relative 16 bit */ -+#define R_TILEPRO_8_PCREL 6 /* PC relative 8 bit */ -+#define R_TILEPRO_LO16 7 /* Low 16 bit */ -+#define R_TILEPRO_HI16 8 /* High 16 bit */ -+#define R_TILEPRO_HA16 9 /* High 16 bit, adjusted */ -+#define R_TILEPRO_COPY 10 /* Copy relocation */ -+#define R_TILEPRO_GLOB_DAT 11 /* Create GOT entry */ -+#define R_TILEPRO_JMP_SLOT 12 /* Create PLT entry */ -+#define R_TILEPRO_RELATIVE 13 /* Adjust by program base */ -+#define R_TILEPRO_BROFF_X1 14 /* X1 pipe branch offset */ -+#define R_TILEPRO_JOFFLONG_X1 15 /* X1 pipe jump offset */ -+#define R_TILEPRO_JOFFLONG_X1_PLT 16 /* X1 pipe jump offset to PLT */ -+#define R_TILEPRO_IMM8_X0 17 /* X0 pipe 8-bit */ -+#define R_TILEPRO_IMM8_Y0 18 /* Y0 pipe 8-bit */ -+#define R_TILEPRO_IMM8_X1 19 /* X1 pipe 8-bit */ -+#define R_TILEPRO_IMM8_Y1 20 /* Y1 pipe 8-bit */ -+#define R_TILEPRO_MT_IMM15_X1 21 /* X1 pipe mtspr */ -+#define R_TILEPRO_MF_IMM15_X1 22 /* X1 pipe mfspr */ -+#define R_TILEPRO_IMM16_X0 23 /* X0 pipe 16-bit */ -+#define R_TILEPRO_IMM16_X1 24 /* X1 pipe 16-bit */ -+#define R_TILEPRO_IMM16_X0_LO 25 /* X0 pipe low 16-bit */ -+#define R_TILEPRO_IMM16_X1_LO 26 /* X1 pipe low 16-bit */ -+#define R_TILEPRO_IMM16_X0_HI 27 /* X0 pipe high 16-bit */ -+#define R_TILEPRO_IMM16_X1_HI 28 /* X1 pipe high 16-bit */ -+#define R_TILEPRO_IMM16_X0_HA 29 /* X0 pipe high 16-bit, adjusted */ -+#define R_TILEPRO_IMM16_X1_HA 30 /* X1 pipe high 16-bit, adjusted */ -+#define R_TILEPRO_IMM16_X0_PCREL 31 /* X0 pipe PC relative 16 bit */ -+#define R_TILEPRO_IMM16_X1_PCREL 32 /* X1 pipe PC relative 16 bit */ -+#define R_TILEPRO_IMM16_X0_LO_PCREL 33 /* X0 pipe PC relative low 16 bit */ -+#define R_TILEPRO_IMM16_X1_LO_PCREL 34 /* X1 pipe PC relative low 16 bit */ -+#define R_TILEPRO_IMM16_X0_HI_PCREL 35 /* X0 pipe PC relative high 16 bit */ -+#define R_TILEPRO_IMM16_X1_HI_PCREL 36 /* X1 pipe PC relative high 16 bit */ -+#define R_TILEPRO_IMM16_X0_HA_PCREL 37 /* X0 pipe PC relative ha() 16 bit */ -+#define R_TILEPRO_IMM16_X1_HA_PCREL 38 /* X1 pipe PC relative ha() 16 bit */ -+#define R_TILEPRO_IMM16_X0_GOT 39 /* X0 pipe 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT 40 /* X1 pipe 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X0_GOT_LO 41 /* X0 pipe low 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT_LO 42 /* X1 pipe low 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X0_GOT_HI 43 /* X0 pipe high 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT_HI 44 /* X1 pipe high 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X0_GOT_HA 45 /* X0 pipe ha() 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT_HA 46 /* X1 pipe ha() 16-bit GOT offset */ -+#define R_TILEPRO_MMSTART_X0 47 /* X0 pipe mm "start" */ -+#define R_TILEPRO_MMEND_X0 48 /* X0 pipe mm "end" */ -+#define R_TILEPRO_MMSTART_X1 49 /* X1 pipe mm "start" */ -+#define R_TILEPRO_MMEND_X1 50 /* X1 pipe mm "end" */ -+#define R_TILEPRO_SHAMT_X0 51 /* X0 pipe shift amount */ -+#define R_TILEPRO_SHAMT_X1 52 /* X1 pipe shift amount */ -+#define R_TILEPRO_SHAMT_Y0 53 /* Y0 pipe shift amount */ -+#define R_TILEPRO_SHAMT_Y1 54 /* Y1 pipe shift amount */ -+#define R_TILEPRO_DEST_IMM8_X1 55 /* X1 pipe destination 8-bit */ -+/* Relocs 56-59 are currently not defined. */ -+#define R_TILEPRO_TLS_GD_CALL 60 /* "jal" for TLS GD */ -+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61 /* X0 pipe "addi" for TLS GD */ -+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62 /* X1 pipe "addi" for TLS GD */ -+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63 /* Y0 pipe "addi" for TLS GD */ -+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64 /* Y1 pipe "addi" for TLS GD */ -+#define R_TILEPRO_TLS_IE_LOAD 65 /* "lw_tls" for TLS IE */ -+#define R_TILEPRO_IMM16_X0_TLS_GD 66 /* X0 pipe 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD 67 /* X1 pipe 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68 /* X0 pipe low 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69 /* X1 pipe low 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70 /* X0 pipe high 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71 /* X1 pipe high 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72 /* X0 pipe ha() 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73 /* X1 pipe ha() 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE 74 /* X0 pipe 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE 75 /* X1 pipe 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76 /* X0 pipe low 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77 /* X1 pipe low 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78 /* X0 pipe high 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79 /* X1 pipe high 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80 /* X0 pipe ha() 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81 /* X1 pipe ha() 16-bit TLS IE offset */ -+#define R_TILEPRO_TLS_DTPMOD32 82 /* ID of module containing symbol */ -+#define R_TILEPRO_TLS_DTPOFF32 83 /* Offset in TLS block */ -+#define R_TILEPRO_TLS_TPOFF32 84 /* Offset in static TLS block */ -+#define R_TILEPRO_IMM16_X0_TLS_LE 85 /* X0 pipe 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE 86 /* X1 pipe 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87 /* X0 pipe low 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88 /* X1 pipe low 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89 /* X0 pipe high 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90 /* X1 pipe high 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91 /* X0 pipe ha() 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92 /* X1 pipe ha() 16-bit TLS LE offset */ -+ -+#define R_TILEPRO_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */ -+#define R_TILEPRO_GNU_VTENTRY 129 /* GNU C++ vtable member usage */ -+ -+#define R_TILEPRO_NUM 130 -+ -+ -+/* TILE-Gx relocations. */ -+#define R_TILEGX_NONE 0 /* No reloc */ -+#define R_TILEGX_64 1 /* Direct 64 bit */ -+#define R_TILEGX_32 2 /* Direct 32 bit */ -+#define R_TILEGX_16 3 /* Direct 16 bit */ -+#define R_TILEGX_8 4 /* Direct 8 bit */ -+#define R_TILEGX_64_PCREL 5 /* PC relative 64 bit */ -+#define R_TILEGX_32_PCREL 6 /* PC relative 32 bit */ -+#define R_TILEGX_16_PCREL 7 /* PC relative 16 bit */ -+#define R_TILEGX_8_PCREL 8 /* PC relative 8 bit */ -+#define R_TILEGX_HW0 9 /* hword 0 16-bit */ -+#define R_TILEGX_HW1 10 /* hword 1 16-bit */ -+#define R_TILEGX_HW2 11 /* hword 2 16-bit */ -+#define R_TILEGX_HW3 12 /* hword 3 16-bit */ -+#define R_TILEGX_HW0_LAST 13 /* last hword 0 16-bit */ -+#define R_TILEGX_HW1_LAST 14 /* last hword 1 16-bit */ -+#define R_TILEGX_HW2_LAST 15 /* last hword 2 16-bit */ -+#define R_TILEGX_COPY 16 /* Copy relocation */ -+#define R_TILEGX_GLOB_DAT 17 /* Create GOT entry */ -+#define R_TILEGX_JMP_SLOT 18 /* Create PLT entry */ -+#define R_TILEGX_RELATIVE 19 /* Adjust by program base */ -+#define R_TILEGX_BROFF_X1 20 /* X1 pipe branch offset */ -+#define R_TILEGX_JUMPOFF_X1 21 /* X1 pipe jump offset */ -+#define R_TILEGX_JUMPOFF_X1_PLT 22 /* X1 pipe jump offset to PLT */ -+#define R_TILEGX_IMM8_X0 23 /* X0 pipe 8-bit */ -+#define R_TILEGX_IMM8_Y0 24 /* Y0 pipe 8-bit */ -+#define R_TILEGX_IMM8_X1 25 /* X1 pipe 8-bit */ -+#define R_TILEGX_IMM8_Y1 26 /* Y1 pipe 8-bit */ -+#define R_TILEGX_DEST_IMM8_X1 27 /* X1 pipe destination 8-bit */ -+#define R_TILEGX_MT_IMM14_X1 28 /* X1 pipe mtspr */ -+#define R_TILEGX_MF_IMM14_X1 29 /* X1 pipe mfspr */ -+#define R_TILEGX_MMSTART_X0 30 /* X0 pipe mm "start" */ -+#define R_TILEGX_MMEND_X0 31 /* X0 pipe mm "end" */ -+#define R_TILEGX_SHAMT_X0 32 /* X0 pipe shift amount */ -+#define R_TILEGX_SHAMT_X1 33 /* X1 pipe shift amount */ -+#define R_TILEGX_SHAMT_Y0 34 /* Y0 pipe shift amount */ -+#define R_TILEGX_SHAMT_Y1 35 /* Y1 pipe shift amount */ -+#define R_TILEGX_IMM16_X0_HW0 36 /* X0 pipe hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0 37 /* X1 pipe hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1 38 /* X0 pipe hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1 39 /* X1 pipe hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2 40 /* X0 pipe hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2 41 /* X1 pipe hword 2 */ -+#define R_TILEGX_IMM16_X0_HW3 42 /* X0 pipe hword 3 */ -+#define R_TILEGX_IMM16_X1_HW3 43 /* X1 pipe hword 3 */ -+#define R_TILEGX_IMM16_X0_HW0_LAST 44 /* X0 pipe last hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0_LAST 45 /* X1 pipe last hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1_LAST 46 /* X0 pipe last hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1_LAST 47 /* X1 pipe last hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2_LAST 48 /* X0 pipe last hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2_LAST 49 /* X1 pipe last hword 2 */ -+#define R_TILEGX_IMM16_X0_HW0_PCREL 50 /* X0 pipe PC relative hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0_PCREL 51 /* X1 pipe PC relative hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1_PCREL 52 /* X0 pipe PC relative hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1_PCREL 53 /* X1 pipe PC relative hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2_PCREL 54 /* X0 pipe PC relative hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2_PCREL 55 /* X1 pipe PC relative hword 2 */ -+#define R_TILEGX_IMM16_X0_HW3_PCREL 56 /* X0 pipe PC relative hword 3 */ -+#define R_TILEGX_IMM16_X1_HW3_PCREL 57 /* X1 pipe PC relative hword 3 */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */ -+#define R_TILEGX_IMM16_X0_HW0_GOT 64 /* X0 pipe hword 0 GOT offset */ -+#define R_TILEGX_IMM16_X1_HW0_GOT 65 /* X1 pipe hword 0 GOT offset */ -+/* Relocs 66-71 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */ -+/* Relocs 76-77 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78 /* X0 pipe hword 0 TLS GD offset */ -+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79 /* X1 pipe hword 0 TLS GD offset */ -+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80 /* X0 pipe hword 0 TLS LE offset */ -+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81 /* X1 pipe hword 0 TLS LE offset */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */ -+/* Relocs 90-91 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92 /* X0 pipe hword 0 TLS IE offset */ -+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93 /* X1 pipe hword 0 TLS IE offset */ -+/* Relocs 94-99 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */ -+/* Relocs 104-105 are currently not defined. */ -+#define R_TILEGX_TLS_DTPMOD64 106 /* 64-bit ID of symbol's module */ -+#define R_TILEGX_TLS_DTPOFF64 107 /* 64-bit offset in TLS block */ -+#define R_TILEGX_TLS_TPOFF64 108 /* 64-bit offset in static TLS block */ -+#define R_TILEGX_TLS_DTPMOD32 109 /* 32-bit ID of symbol's module */ -+#define R_TILEGX_TLS_DTPOFF32 110 /* 32-bit offset in TLS block */ -+#define R_TILEGX_TLS_TPOFF32 111 /* 32-bit offset in static TLS block */ -+#define R_TILEGX_TLS_GD_CALL 112 /* "jal" for TLS GD */ -+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113 /* X0 pipe "addi" for TLS GD */ -+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114 /* X1 pipe "addi" for TLS GD */ -+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115 /* Y0 pipe "addi" for TLS GD */ -+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116 /* Y1 pipe "addi" for TLS GD */ -+#define R_TILEGX_TLS_IE_LOAD 117 /* "ld_tls" for TLS IE */ -+#define R_TILEGX_IMM8_X0_TLS_ADD 118 /* X0 pipe "addi" for TLS GD/IE */ -+#define R_TILEGX_IMM8_X1_TLS_ADD 119 /* X1 pipe "addi" for TLS GD/IE */ -+#define R_TILEGX_IMM8_Y0_TLS_ADD 120 /* Y0 pipe "addi" for TLS GD/IE */ -+#define R_TILEGX_IMM8_Y1_TLS_ADD 121 /* Y1 pipe "addi" for TLS GD/IE */ -+ -+#define R_TILEGX_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */ -+#define R_TILEGX_GNU_VTENTRY 129 /* GNU C++ vtable member usage */ -+ -+#define R_TILEGX_NUM 130 -+ -+#endif /* elf.h */ diff --git a/target/linux/generic/pending-4.4/211-sign-file-libressl.patch b/target/linux/generic/pending-4.4/211-sign-file-libressl.patch deleted file mode 100644 index c174087f10..0000000000 --- a/target/linux/generic/pending-4.4/211-sign-file-libressl.patch +++ /dev/null @@ -1,16 +0,0 @@ -LibreSSL disables the CMS subsystem, so sign-file.c needs to fall back to using -PKCS#7 in that case. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/scripts/sign-file.c -+++ b/scripts/sign-file.c -@@ -39,7 +39,7 @@ - * signing with anything other than SHA1 - so we're stuck with that if such is - * the case. - */ --#if OPENSSL_VERSION_NUMBER < 0x10000000L -+#if defined(LIBRESSL_VERSION_NUMBER) || OPENSSL_VERSION_NUMBER < 0x10000000L - #define USE_PKCS7 - #endif - #ifndef USE_PKCS7 diff --git a/target/linux/generic/pending-4.4/212-byteshift_portability.patch b/target/linux/generic/pending-4.4/212-byteshift_portability.patch deleted file mode 100644 index 0f23ba9be9..0000000000 --- a/target/linux/generic/pending-4.4/212-byteshift_portability.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/tools/include/tools/be_byteshift.h -+++ b/tools/include/tools/be_byteshift.h -@@ -1,6 +1,10 @@ - #ifndef _TOOLS_BE_BYTESHIFT_H - #define _TOOLS_BE_BYTESHIFT_H - -+#ifndef __linux__ -+#include "linux_types.h" -+#endif -+ - #include <stdint.h> - - static inline uint16_t __get_unaligned_be16(const uint8_t *p) ---- a/tools/include/tools/le_byteshift.h -+++ b/tools/include/tools/le_byteshift.h -@@ -1,6 +1,10 @@ - #ifndef _TOOLS_LE_BYTESHIFT_H - #define _TOOLS_LE_BYTESHIFT_H - -+#ifndef __linux__ -+#include "linux_types.h" -+#endif -+ - #include <stdint.h> - - static inline uint16_t __get_unaligned_le16(const uint8_t *p) ---- /dev/null -+++ b/tools/include/tools/linux_types.h -@@ -0,0 +1,22 @@ -+#ifndef __LINUX_TYPES_H -+#define __LINUX_TYPES_H -+ -+#include <stdint.h> -+ -+typedef uint8_t __u8; -+typedef uint8_t __be8; -+typedef uint8_t __le8; -+ -+typedef uint16_t __u16; -+typedef uint16_t __be16; -+typedef uint16_t __le16; -+ -+typedef uint32_t __u32; -+typedef uint32_t __be32; -+typedef uint32_t __le32; -+ -+typedef uint64_t __u64; -+typedef uint64_t __be64; -+typedef uint64_t __le64; -+ -+#endif diff --git a/target/linux/generic/pending-4.4/214-spidev_h_portability.patch b/target/linux/generic/pending-4.4/214-spidev_h_portability.patch deleted file mode 100644 index 39fa32ffa2..0000000000 --- a/target/linux/generic/pending-4.4/214-spidev_h_portability.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/uapi/linux/spi/spidev.h -+++ b/include/uapi/linux/spi/spidev.h -@@ -112,7 +112,7 @@ struct spi_ioc_transfer { - - /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */ - #define SPI_MSGSIZE(N) \ -- ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \ -+ ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \ - ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0) - #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)]) - diff --git a/target/linux/generic/pending-4.4/220-gc_sections.patch b/target/linux/generic/pending-4.4/220-gc_sections.patch deleted file mode 100644 index cbe03d5c5e..0000000000 --- a/target/linux/generic/pending-4.4/220-gc_sections.patch +++ /dev/null @@ -1,536 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> - -use -ffunction-sections, -fdata-sections and --gc-sections - -In combination with kernel symbol export stripping this significantly reduces -the kernel image size. Used on both ARM and MIPS architectures. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> -Signed-off-by: Jonas Gorski <jogo@openwrt.org> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -89,10 +89,14 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin - # - cflags-y += -G 0 -mno-abicalls -fno-pic -pipe - cflags-y += -msoft-float --LDFLAGS_vmlinux += -G 0 -static -n -nostdlib -+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections - KBUILD_AFLAGS_MODULE += -mlong-calls - KBUILD_CFLAGS_MODULE += -mlong-calls - -+ifndef CONFIG_FUNCTION_TRACER -+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections -+endif -+ - # - # pass -msoft-float to GAS if it supports it. However on newer binutils - # (specifically newer than 2.24.51.20140728) we then also need to explicitly ---- a/arch/mips/kernel/vmlinux.lds.S -+++ b/arch/mips/kernel/vmlinux.lds.S -@@ -69,7 +69,7 @@ SECTIONS - /* Exception table for data bus errors */ - __dbe_table : { - __start___dbe_table = .; -- *(__dbe_table) -+ KEEP(*(__dbe_table)) - __stop___dbe_table = .; - } - -@@ -119,7 +119,7 @@ SECTIONS - . = ALIGN(4); - .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) { - __mips_machines_start = .; -- *(.mips.machines.init) -+ KEEP(*(.mips.machines.init)) - __mips_machines_end = .; - } - ---- a/include/asm-generic/vmlinux.lds.h -+++ b/include/asm-generic/vmlinux.lds.h -@@ -89,7 +89,7 @@ - #ifdef CONFIG_FTRACE_MCOUNT_RECORD - #define MCOUNT_REC() . = ALIGN(8); \ - VMLINUX_SYMBOL(__start_mcount_loc) = .; \ -- *(__mcount_loc) \ -+ KEEP(*(__mcount_loc)) \ - VMLINUX_SYMBOL(__stop_mcount_loc) = .; - #else - #define MCOUNT_REC() -@@ -97,7 +97,7 @@ - - #ifdef CONFIG_TRACE_BRANCH_PROFILING - #define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \ -- *(_ftrace_annotated_branch) \ -+ KEEP(*(_ftrace_annotated_branch)) \ - VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .; - #else - #define LIKELY_PROFILE() -@@ -105,7 +105,7 @@ - - #ifdef CONFIG_PROFILE_ALL_BRANCHES - #define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \ -- *(_ftrace_branch) \ -+ KEEP(*(_ftrace_branch)) \ - VMLINUX_SYMBOL(__stop_branch_profile) = .; - #else - #define BRANCH_PROFILE() -@@ -114,7 +114,7 @@ - #ifdef CONFIG_KPROBES - #define KPROBE_BLACKLIST() . = ALIGN(8); \ - VMLINUX_SYMBOL(__start_kprobe_blacklist) = .; \ -- *(_kprobe_blacklist) \ -+ KEEP(*(_kprobe_blacklist)) \ - VMLINUX_SYMBOL(__stop_kprobe_blacklist) = .; - #else - #define KPROBE_BLACKLIST() -@@ -123,10 +123,10 @@ - #ifdef CONFIG_EVENT_TRACING - #define FTRACE_EVENTS() . = ALIGN(8); \ - VMLINUX_SYMBOL(__start_ftrace_events) = .; \ -- *(_ftrace_events) \ -+ KEEP(*(_ftrace_events)) \ - VMLINUX_SYMBOL(__stop_ftrace_events) = .; \ - VMLINUX_SYMBOL(__start_ftrace_enum_maps) = .; \ -- *(_ftrace_enum_map) \ -+ KEEP(*(_ftrace_enum_map)) \ - VMLINUX_SYMBOL(__stop_ftrace_enum_maps) = .; - #else - #define FTRACE_EVENTS() -@@ -134,7 +134,7 @@ - - #ifdef CONFIG_TRACING - #define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \ -- *(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \ -+ KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \ - VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .; - #define TRACEPOINT_STR() VMLINUX_SYMBOL(__start___tracepoint_str) = .; \ - *(__tracepoint_str) /* Trace_printk fmt' pointer */ \ -@@ -147,7 +147,7 @@ - #ifdef CONFIG_FTRACE_SYSCALLS - #define TRACE_SYSCALLS() . = ALIGN(8); \ - VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \ -- *(__syscalls_metadata) \ -+ KEEP(*(__syscalls_metadata)) \ - VMLINUX_SYMBOL(__stop_syscalls_metadata) = .; - #else - #define TRACE_SYSCALLS() -@@ -169,8 +169,8 @@ - #define _OF_TABLE_1(name) \ - . = ALIGN(8); \ - VMLINUX_SYMBOL(__##name##_of_table) = .; \ -- *(__##name##_of_table) \ -- *(__##name##_of_table_end) -+ KEEP(*(__##name##_of_table)) \ -+ KEEP(*(__##name##_of_table_end)) - - #define CLKSRC_OF_TABLES() OF_TABLE(CONFIG_CLKSRC_OF, clksrc) - #define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip) -@@ -194,7 +194,7 @@ - #define KERNEL_DTB() \ - STRUCT_ALIGN(); \ - VMLINUX_SYMBOL(__dtb_start) = .; \ -- *(.dtb.init.rodata) \ -+ KEEP(*(.dtb.init.rodata)) \ - VMLINUX_SYMBOL(__dtb_end) = .; - - /* .data section */ -@@ -210,16 +210,17 @@ - /* implement dynamic printk debug */ \ - . = ALIGN(8); \ - VMLINUX_SYMBOL(__start___jump_table) = .; \ -- *(__jump_table) \ -+ KEEP(*(__jump_table)) \ - VMLINUX_SYMBOL(__stop___jump_table) = .; \ - . = ALIGN(8); \ - VMLINUX_SYMBOL(__start___verbose) = .; \ -- *(__verbose) \ -+ KEEP(*(__verbose)) \ - VMLINUX_SYMBOL(__stop___verbose) = .; \ - LIKELY_PROFILE() \ - BRANCH_PROFILE() \ - TRACE_PRINTKS() \ -- TRACEPOINT_STR() -+ TRACEPOINT_STR() \ -+ *(.data.[a-zA-Z_]*) - - /* - * Data section helpers -@@ -273,35 +274,35 @@ - /* PCI quirks */ \ - .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \ -- *(.pci_fixup_early) \ -+ KEEP(*(.pci_fixup_early)) \ - VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \ -- *(.pci_fixup_header) \ -+ KEEP(*(.pci_fixup_header)) \ - VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \ -- *(.pci_fixup_final) \ -+ KEEP(*(.pci_fixup_final)) \ - VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \ -- *(.pci_fixup_enable) \ -+ KEEP(*(.pci_fixup_enable)) \ - VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \ -- *(.pci_fixup_resume) \ -+ KEEP(*(.pci_fixup_resume)) \ - VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \ -- *(.pci_fixup_resume_early) \ -+ KEEP(*(.pci_fixup_resume_early)) \ - VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \ -- *(.pci_fixup_suspend) \ -+ KEEP(*(.pci_fixup_suspend)) \ - VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_suspend_late) = .; \ -- *(.pci_fixup_suspend_late) \ -+ KEEP(*(.pci_fixup_suspend_late)) \ - VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .; \ - } \ - \ - /* Built-in firmware blobs */ \ - .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start_builtin_fw) = .; \ -- *(.builtin_fw) \ -+ KEEP(*(.builtin_fw)) \ - VMLINUX_SYMBOL(__end_builtin_fw) = .; \ - } \ - \ -@@ -310,49 +311,49 @@ - /* Kernel symbol table: Normal symbols */ \ - __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab) = .; \ -- *(SORT(___ksymtab+*)) \ -+ KEEP(*(SORT(___ksymtab+*))) \ - VMLINUX_SYMBOL(__stop___ksymtab) = .; \ - } \ - \ - /* Kernel symbol table: GPL-only symbols */ \ - __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \ -- *(SORT(___ksymtab_gpl+*)) \ -+ KEEP(*(SORT(___ksymtab_gpl+*))) \ - VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \ - } \ - \ - /* Kernel symbol table: Normal unused symbols */ \ - __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \ -- *(SORT(___ksymtab_unused+*)) \ -+ KEEP(*(SORT(___ksymtab_unused+*))) \ - VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \ - } \ - \ - /* Kernel symbol table: GPL-only unused symbols */ \ - __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \ -- *(SORT(___ksymtab_unused_gpl+*)) \ -+ KEEP(*(SORT(___ksymtab_unused_gpl+*))) \ - VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \ - } \ - \ - /* Kernel symbol table: GPL-future-only symbols */ \ - __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \ -- *(SORT(___ksymtab_gpl_future+*)) \ -+ KEEP(*(SORT(___ksymtab_gpl_future+*))) \ - VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \ - } \ - \ - /* Kernel symbol table: Normal symbols */ \ - __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___kcrctab) = .; \ -- *(SORT(___kcrctab+*)) \ -+ KEEP(*(SORT(___kcrctab+*))) \ - VMLINUX_SYMBOL(__stop___kcrctab) = .; \ - } \ - \ - /* Kernel symbol table: GPL-only symbols */ \ - __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \ -- *(SORT(___kcrctab_gpl+*)) \ -+ KEEP(*(SORT(___kcrctab_gpl+*))) \ - VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \ - } \ - \ -@@ -366,14 +367,14 @@ - /* Kernel symbol table: GPL-only unused symbols */ \ - __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \ -- *(SORT(___kcrctab_unused_gpl+*)) \ -+ KEEP(*(SORT(___kcrctab_unused_gpl+*))) \ - VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \ - } \ - \ - /* Kernel symbol table: GPL-future-only symbols */ \ - __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \ -- *(SORT(___kcrctab_gpl_future+*)) \ -+ KEEP(*(SORT(___kcrctab_gpl_future+*))) \ - VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \ - } \ - \ -@@ -392,14 +393,14 @@ - /* Built-in module parameters. */ \ - __param : AT(ADDR(__param) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___param) = .; \ -- *(__param) \ -+ KEEP(*(__param)) \ - VMLINUX_SYMBOL(__stop___param) = .; \ - } \ - \ - /* Built-in module versions. */ \ - __modver : AT(ADDR(__modver) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___modver) = .; \ -- *(__modver) \ -+ KEEP(*(__modver)) \ - VMLINUX_SYMBOL(__stop___modver) = .; \ - . = ALIGN((align)); \ - VMLINUX_SYMBOL(__end_rodata) = .; \ -@@ -453,7 +454,7 @@ - #define ENTRY_TEXT \ - ALIGN_FUNCTION(); \ - VMLINUX_SYMBOL(__entry_text_start) = .; \ -- *(.entry.text) \ -+ KEEP(*(.entry.text)) \ - VMLINUX_SYMBOL(__entry_text_end) = .; - - #ifdef CONFIG_FUNCTION_GRAPH_TRACER -@@ -481,7 +482,7 @@ - . = ALIGN(align); \ - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ex_table) = .; \ -- *(__ex_table) \ -+ KEEP(*(__ex_table)) \ - VMLINUX_SYMBOL(__stop___ex_table) = .; \ - } - -@@ -497,9 +498,9 @@ - #ifdef CONFIG_CONSTRUCTORS - #define KERNEL_CTORS() . = ALIGN(8); \ - VMLINUX_SYMBOL(__ctors_start) = .; \ -- *(.ctors) \ -+ KEEP(*(.ctors)) \ - *(SORT(.init_array.*)) \ -- *(.init_array) \ -+ KEEP(*(.init_array)) \ - VMLINUX_SYMBOL(__ctors_end) = .; - #else - #define KERNEL_CTORS() -@@ -556,7 +557,7 @@ - #define SBSS(sbss_align) \ - . = ALIGN(sbss_align); \ - .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \ -- *(.sbss) \ -+ *(.sbss .sbss.*) \ - *(.scommon) \ - } - -@@ -574,7 +575,7 @@ - BSS_FIRST_SECTIONS \ - *(.bss..page_aligned) \ - *(.dynbss) \ -- *(.bss) \ -+ *(.bss .bss.*) \ - *(COMMON) \ - } - -@@ -623,7 +624,7 @@ - . = ALIGN(8); \ - __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___bug_table) = .; \ -- *(__bug_table) \ -+ KEEP(*(__bug_table)) \ - VMLINUX_SYMBOL(__stop___bug_table) = .; \ - } - #else -@@ -635,7 +636,7 @@ - . = ALIGN(4); \ - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__tracedata_start) = .; \ -- *(.tracedata) \ -+ KEEP(*(.tracedata)) \ - VMLINUX_SYMBOL(__tracedata_end) = .; \ - } - #else -@@ -652,17 +653,17 @@ - #define INIT_SETUP(initsetup_align) \ - . = ALIGN(initsetup_align); \ - VMLINUX_SYMBOL(__setup_start) = .; \ -- *(.init.setup) \ -+ KEEP(*(.init.setup)) \ - VMLINUX_SYMBOL(__setup_end) = .; - - #define INIT_CALLS_LEVEL(level) \ - VMLINUX_SYMBOL(__initcall##level##_start) = .; \ -- *(.initcall##level##.init) \ -- *(.initcall##level##s.init) \ -+ KEEP(*(.initcall##level##.init)) \ -+ KEEP(*(.initcall##level##s.init)) \ - - #define INIT_CALLS \ - VMLINUX_SYMBOL(__initcall_start) = .; \ -- *(.initcallearly.init) \ -+ KEEP(*(.initcallearly.init)) \ - INIT_CALLS_LEVEL(0) \ - INIT_CALLS_LEVEL(1) \ - INIT_CALLS_LEVEL(2) \ -@@ -676,21 +677,21 @@ - - #define CON_INITCALL \ - VMLINUX_SYMBOL(__con_initcall_start) = .; \ -- *(.con_initcall.init) \ -+ KEEP(*(.con_initcall.init)) \ - VMLINUX_SYMBOL(__con_initcall_end) = .; - - #define SECURITY_INITCALL \ - VMLINUX_SYMBOL(__security_initcall_start) = .; \ -- *(.security_initcall.init) \ -+ KEEP(*(.security_initcall.init)) \ - VMLINUX_SYMBOL(__security_initcall_end) = .; - - #ifdef CONFIG_BLK_DEV_INITRD - #define INIT_RAM_FS \ - . = ALIGN(4); \ - VMLINUX_SYMBOL(__initramfs_start) = .; \ -- *(.init.ramfs) \ -+ KEEP(*(.init.ramfs)) \ - . = ALIGN(8); \ -- *(.init.ramfs.info) -+ KEEP(*(.init.ramfs.info)) - #else - #define INIT_RAM_FS - #endif ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -22,11 +22,16 @@ endif - ifeq ($(CONFIG_ARM_MODULE_PLTS),y) - LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds - endif -+LDFLAGS_vmlinux += --gc-sections - - OBJCOPYFLAGS :=-O binary -R .comment -S - GZFLAGS :=-9 - #KBUILD_CFLAGS +=-pipe - -+ifndef CONFIG_FUNCTION_TRACER -+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections -+endif -+ - # Never generate .eh_frame - KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) - ---- a/arch/arm/kernel/vmlinux.lds.S -+++ b/arch/arm/kernel/vmlinux.lds.S -@@ -15,13 +15,13 @@ - #define PROC_INFO \ - . = ALIGN(4); \ - VMLINUX_SYMBOL(__proc_info_begin) = .; \ -- *(.proc.info.init) \ -+ KEEP(*(.proc.info.init)) \ - VMLINUX_SYMBOL(__proc_info_end) = .; - - #define IDMAP_TEXT \ - ALIGN_FUNCTION(); \ - VMLINUX_SYMBOL(__idmap_text_start) = .; \ -- *(.idmap.text) \ -+ KEEP(*(.idmap.text)) \ - VMLINUX_SYMBOL(__idmap_text_end) = .; \ - . = ALIGN(PAGE_SIZE); \ - VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ -@@ -102,7 +102,7 @@ SECTIONS - _stext = .; /* Text and read-only data */ - IDMAP_TEXT - __exception_text_start = .; -- *(.exception.text) -+ KEEP(*(.exception.text)) - __exception_text_end = .; - IRQENTRY_TEXT - TEXT_TEXT -@@ -126,7 +126,7 @@ SECTIONS - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { - __start___ex_table = .; - #ifdef CONFIG_MMU -- *(__ex_table) -+ KEEP(*(__ex_table)) - #endif - __stop___ex_table = .; - } -@@ -138,12 +138,12 @@ SECTIONS - . = ALIGN(8); - .ARM.unwind_idx : { - __start_unwind_idx = .; -- *(.ARM.exidx*) -+ KEEP(*(.ARM.exidx*)) - __stop_unwind_idx = .; - } - .ARM.unwind_tab : { - __start_unwind_tab = .; -- *(.ARM.extab*) -+ KEEP(*(.ARM.extab*)) - __stop_unwind_tab = .; - } - #endif -@@ -166,14 +166,14 @@ SECTIONS - */ - __vectors_start = .; - .vectors 0 : AT(__vectors_start) { -- *(.vectors) -+ KEEP(*(.vectors)) - } - . = __vectors_start + SIZEOF(.vectors); - __vectors_end = .; - - __stubs_start = .; - .stubs 0x1000 : AT(__stubs_start) { -- *(.stubs) -+ KEEP(*(.stubs)) - } - . = __stubs_start + SIZEOF(.stubs); - __stubs_end = .; -@@ -187,24 +187,24 @@ SECTIONS - } - .init.arch.info : { - __arch_info_begin = .; -- *(.arch.info.init) -+ KEEP(*(.arch.info.init)) - __arch_info_end = .; - } - .init.tagtable : { - __tagtable_begin = .; -- *(.taglist.init) -+ KEEP(*(.taglist.init)) - __tagtable_end = .; - } - #ifdef CONFIG_SMP_ON_UP - .init.smpalt : { - __smpalt_begin = .; -- *(.alt.smp.init) -+ KEEP(*(.alt.smp.init)) - __smpalt_end = .; - } - #endif - .init.pv_table : { - __pv_table_begin = .; -- *(.pv_table) -+ KEEP(*(.pv_table)) - __pv_table_end = .; - } - .init.data : { ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -105,6 +105,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y) - ORIG_CFLAGS := $(KBUILD_CFLAGS) - KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) - endif -+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL)) - - ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) - asflags-y := -DZIMAGE diff --git a/target/linux/generic/pending-4.4/221-module_exports.patch b/target/linux/generic/pending-4.4/221-module_exports.patch deleted file mode 100644 index 44c0a6dec6..0000000000 --- a/target/linux/generic/pending-4.4/221-module_exports.patch +++ /dev/null @@ -1,88 +0,0 @@ ---- a/include/asm-generic/vmlinux.lds.h -+++ b/include/asm-generic/vmlinux.lds.h -@@ -54,6 +54,16 @@ - #define LOAD_OFFSET 0 - #endif - -+#ifndef SYMTAB_KEEP -+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*))) -+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*))) -+#endif -+ -+#ifndef SYMTAB_DISCARD -+#define SYMTAB_DISCARD -+#define SYMTAB_DISCARD_GPL -+#endif -+ - #include <linux/export.h> - - /* Align . to a 8 byte boundary equals to maximum function alignment. */ -@@ -311,14 +321,14 @@ - /* Kernel symbol table: Normal symbols */ \ - __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab) = .; \ -- KEEP(*(SORT(___ksymtab+*))) \ -+ SYMTAB_KEEP \ - VMLINUX_SYMBOL(__stop___ksymtab) = .; \ - } \ - \ - /* Kernel symbol table: GPL-only symbols */ \ - __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \ -- KEEP(*(SORT(___ksymtab_gpl+*))) \ -+ SYMTAB_KEEP_GPL \ - VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \ - } \ - \ -@@ -380,7 +390,7 @@ - \ - /* Kernel symbol table: strings */ \ - __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \ -- *(__ksymtab_strings) \ -+ *(__ksymtab_strings+*) \ - } \ - \ - /* __*init sections */ \ -@@ -710,6 +720,8 @@ - EXIT_TEXT \ - EXIT_DATA \ - EXIT_CALL \ -+ SYMTAB_DISCARD \ -+ SYMTAB_DISCARD_GPL \ - *(.discard) \ - *(.discard.*) \ - } ---- a/scripts/Makefile.build -+++ b/scripts/Makefile.build -@@ -372,7 +372,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $( - # Linker scripts preprocessor (.lds.S -> .lds) - # --------------------------------------------------------------------------- - quiet_cmd_cpp_lds_S = LDS $@ -- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ -+ cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -C -U$(ARCH) \ - -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< - - $(obj)/%.lds: $(src)/%.lds.S FORCE ---- a/include/linux/export.h -+++ b/include/linux/export.h -@@ -52,12 +52,19 @@ extern struct module __this_module; - #define __CRC_SYMBOL(sym, sec) - #endif - -+#ifdef MODULE -+#define __EXPORT_SUFFIX(sym) -+#else -+#define __EXPORT_SUFFIX(sym) "+" #sym -+#endif -+ - /* For every exported symbol, place a struct in the __ksymtab section */ - #define __EXPORT_SYMBOL(sym, sec) \ - extern typeof(sym) sym; \ - __CRC_SYMBOL(sym, sec) \ - static const char __kstrtab_##sym[] \ -- __attribute__((section("__ksymtab_strings"), aligned(1))) \ -+ __attribute__((section("__ksymtab_strings" \ -+ __EXPORT_SUFFIX(sym)), aligned(1))) \ - = VMLINUX_SYMBOL_STR(sym); \ - extern const struct kernel_symbol __ksymtab_##sym; \ - __visible const struct kernel_symbol __ksymtab_##sym \ diff --git a/target/linux/generic/pending-4.4/222-arm_zimage_none.patch b/target/linux/generic/pending-4.4/222-arm_zimage_none.patch deleted file mode 100644 index 47fa6c928d..0000000000 --- a/target/linux/generic/pending-4.4/222-arm_zimage_none.patch +++ /dev/null @@ -1,133 +0,0 @@ -ARM: implement "uncompressed zImage" - -Based on RFC patch by Uwe Kleine-König -http://www.spinics.net/lists/arm-kernel/msg230153.html - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -71,6 +71,7 @@ suffix_$(CONFIG_KERNEL_LZO) = lzo - suffix_$(CONFIG_KERNEL_LZMA) = lzma - suffix_$(CONFIG_KERNEL_XZ) = xzkern - suffix_$(CONFIG_KERNEL_LZ4) = lz4 -+suffix_$(CONFIG_KERNEL_CAT) = cat - - # Borrowed libfdt files for the ATAG compatibility mode - -@@ -95,7 +96,7 @@ targets := vmlinux vmlinux.lds \ - bswapsdi2.S font.o font.c head.o misc.o $(OBJS) - - # Make sure files are removed during clean --extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ -+extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 piggy.cat \ - lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ - hyp-stub.S - ---- a/arch/arm/boot/compressed/decompress.c -+++ b/arch/arm/boot/compressed/decompress.c -@@ -55,6 +55,10 @@ extern char * strstr(const char * s1, co - #include "../../../../lib/decompress_unlz4.c" - #endif - -+#ifdef CONFIG_KERNEL_CAT -+#include "../../../../lib/decompress_uncat.c" -+#endif -+ - int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) - { - return __decompress(input, len, NULL, NULL, output, 0, NULL, error); ---- /dev/null -+++ b/arch/arm/boot/compressed/piggy.cat.S -@@ -0,0 +1,6 @@ -+ .section .piggydata,#alloc -+ .globl input_data -+input_data: -+ .incbin "arch/arm/boot/compressed/piggy.cat" -+ .globl input_data_end -+input_data_end: ---- a/init/Kconfig -+++ b/init/Kconfig -@@ -115,6 +115,9 @@ config HAVE_KERNEL_LZO - config HAVE_KERNEL_LZ4 - bool - -+config HAVE_KERNEL_CAT -+ bool -+ - choice - prompt "Kernel compression mode" - default KERNEL_GZIP -@@ -181,9 +184,10 @@ config KERNEL_LZO - bool "LZO" - depends on HAVE_KERNEL_LZO - help -- Its compression ratio is the poorest among the choices. The kernel -- size is about 10% bigger than gzip; however its speed -- (both compression and decompression) is the fastest. -+ Its compression ratio is the poorest among the choices (apart from -+ uncompressed below). The kernel size is about 10% bigger than gzip; -+ however its speed (both compression and decompression) is the -+ fastest. - - config KERNEL_LZ4 - bool "LZ4" -@@ -197,6 +201,12 @@ config KERNEL_LZ4 - is about 8% bigger than LZO. But the decompression speed is - faster than LZO. - -+config KERNEL_CAT -+ bool "uncompressed" -+ depends on HAVE_KERNEL_CAT -+ help -+ Don't use compression at all. -+ - endchoice - - config DEFAULT_HOSTNAME ---- /dev/null -+++ b/lib/decompress_uncat.c -@@ -0,0 +1,17 @@ -+#include <linux/types.h> -+#include <linux/compiler.h> -+ -+#ifdef STATIC -+ -+STATIC int __decompress(unsigned char *buf, long in_len, -+ long (*fill)(void*, unsigned long), -+ long (*flush)(void*, unsigned long), -+ unsigned char *output, long out_len, -+ long *posp, -+ void (*error)(char *x)) -+{ -+ memmove(output, buf, in_len); -+ return 0; -+} -+ -+#endif ---- a/scripts/Makefile.lib -+++ b/scripts/Makefile.lib -@@ -337,6 +337,13 @@ cmd_lz4 = (cat $(filter-out FORCE,$^) | - lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) - -+# uncompressed -+# --------------------------------------------------------------------------- -+quiet_cmd_cat = CAT $@ -+cmd_cat = (cat $(filter-out FORCE,$^) \ -+ && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ -+ (rm -f $@ ; false) -+ - # U-Boot mkimage - # --------------------------------------------------------------------------- - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -59,6 +59,7 @@ config ARM - select HAVE_KERNEL_LZMA - select HAVE_KERNEL_LZO - select HAVE_KERNEL_XZ -+ select HAVE_KERNEL_CAT - select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M - select HAVE_KRETPROBES if (HAVE_KPROBES) - select HAVE_MEMBLOCK diff --git a/target/linux/generic/pending-4.4/230-openwrt_lzma_options.patch b/target/linux/generic/pending-4.4/230-openwrt_lzma_options.patch deleted file mode 100644 index d5bbb19cfe..0000000000 --- a/target/linux/generic/pending-4.4/230-openwrt_lzma_options.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/scripts/Makefile.lib -+++ b/scripts/Makefile.lib -@@ -324,7 +324,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^) - - quiet_cmd_lzma = LZMA $@ - cmd_lzma = (cat $(filter-out FORCE,$^) | \ -- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ -+ lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) - - quiet_cmd_lzo = LZO $@ ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -226,7 +226,7 @@ cpio_list= - output="/dev/stdout" - output_file="" - is_cpio_compressed= --compr="gzip -n -9 -f" -+compr="gzip -n -9 -f -" - - arg="$1" - case "$arg" in -@@ -242,13 +242,13 @@ case "$arg" in - output=${cpio_list} - echo "$output_file" | grep -q "\.gz$" \ - && [ -x "`which gzip 2> /dev/null`" ] \ -- && compr="gzip -n -9 -f" -+ && compr="gzip -n -9 -f -" - echo "$output_file" | grep -q "\.bz2$" \ - && [ -x "`which bzip2 2> /dev/null`" ] \ -- && compr="bzip2 -9 -f" -+ && compr="bzip2 -9 -f -" - echo "$output_file" | grep -q "\.lzma$" \ - && [ -x "`which lzma 2> /dev/null`" ] \ -- && compr="lzma -9 -f" -+ && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so" - echo "$output_file" | grep -q "\.xz$" \ - && [ -x "`which xz 2> /dev/null`" ] \ - && compr="xz --check=crc32 --lzma2=dict=1MiB" -@@ -315,7 +315,7 @@ if [ ! -z ${output_file} ]; then - if [ "${is_cpio_compressed}" = "compressed" ]; then - cat ${cpio_tfile} > ${output_file} - else -- (cat ${cpio_tfile} | ${compr} - > ${output_file}) \ -+ (cat ${cpio_tfile} | ${compr} > ${output_file}) \ - || (rm -f ${output_file} ; false) - fi - [ -z ${cpio_file} ] && rm ${cpio_tfile} ---- a/lib/decompress.c -+++ b/lib/decompress.c -@@ -48,6 +48,7 @@ static const struct compress_format comp - { {0x1f, 0x9e}, "gzip", gunzip }, - { {0x42, 0x5a}, "bzip2", bunzip2 }, - { {0x5d, 0x00}, "lzma", unlzma }, -+ { {0x6d, 0x00}, "lzma-openwrt", unlzma }, - { {0xfd, 0x37}, "xz", unxz }, - { {0x89, 0x4c}, "lzo", unlzo }, - { {0x02, 0x21}, "lz4", unlz4 }, diff --git a/target/linux/generic/pending-4.4/250-netfilter_depends.patch b/target/linux/generic/pending-4.4/250-netfilter_depends.patch deleted file mode 100644 index b39d971a76..0000000000 --- a/target/linux/generic/pending-4.4/250-netfilter_depends.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -218,7 +218,6 @@ config NF_CONNTRACK_FTP - - config NF_CONNTRACK_H323 - tristate "H.323 protocol support" -- depends on IPV6 || IPV6=n - depends on NETFILTER_ADVANCED - help - H.323 is a VoIP signalling protocol from ITU-T. As one of the most -@@ -930,7 +929,6 @@ config NETFILTER_XT_TARGET_SECMARK - - config NETFILTER_XT_TARGET_TCPMSS - tristate '"TCPMSS" target support' -- depends on IPV6 || IPV6=n - default m if NETFILTER_ADVANCED=n - ---help--- - This option adds a `TCPMSS' target, which allows you to alter the diff --git a/target/linux/generic/pending-4.4/251-sound_kconfig.patch b/target/linux/generic/pending-4.4/251-sound_kconfig.patch deleted file mode 100644 index 4cb67adc70..0000000000 --- a/target/linux/generic/pending-4.4/251-sound_kconfig.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/sound/core/Kconfig -+++ b/sound/core/Kconfig -@@ -16,13 +16,13 @@ config SND_DMAENGINE_PCM - tristate - - config SND_HWDEP -- tristate -+ tristate "Sound hardware support" - - config SND_RAWMIDI - tristate - - config SND_COMPRESS_OFFLOAD -- tristate -+ tristate "Compression offloading support" - - # To be effective this also requires INPUT - users should say: - # select SND_JACK if INPUT=y || INPUT=SND diff --git a/target/linux/generic/pending-4.4/252-mv_cesa_depends.patch b/target/linux/generic/pending-4.4/252-mv_cesa_depends.patch deleted file mode 100644 index f54f3c7fcc..0000000000 --- a/target/linux/generic/pending-4.4/252-mv_cesa_depends.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -163,6 +163,7 @@ config CRYPTO_DEV_MV_CESA - tristate "Marvell's Cryptographic Engine" - depends on PLAT_ORION - select CRYPTO_AES -+ select CRYPTO_HASH2 - select CRYPTO_BLKCIPHER - select CRYPTO_HASH - select SRAM diff --git a/target/linux/generic/pending-4.4/253-ssb_b43_default_on.patch b/target/linux/generic/pending-4.4/253-ssb_b43_default_on.patch deleted file mode 100644 index 29d2a41a3b..0000000000 --- a/target/linux/generic/pending-4.4/253-ssb_b43_default_on.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -29,6 +29,7 @@ config SSB_SPROM - config SSB_BLOCKIO - bool - depends on SSB -+ default y - - config SSB_PCIHOST_POSSIBLE - bool -@@ -49,7 +50,7 @@ config SSB_PCIHOST - config SSB_B43_PCI_BRIDGE - bool - depends on SSB_PCIHOST -- default n -+ default y - - config SSB_PCMCIAHOST_POSSIBLE - bool ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -17,6 +17,7 @@ config BCMA - config BCMA_BLOCKIO - bool - depends on BCMA -+ default y - - config BCMA_HOST_PCI_POSSIBLE - bool diff --git a/target/linux/generic/pending-4.4/254-textsearch_kconfig_hacks.patch b/target/linux/generic/pending-4.4/254-textsearch_kconfig_hacks.patch deleted file mode 100644 index 12cedbed15..0000000000 --- a/target/linux/generic/pending-4.4/254-textsearch_kconfig_hacks.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -334,16 +334,16 @@ config BCH_CONST_T - # Textsearch support is select'ed if needed - # - config TEXTSEARCH -- bool -+ boolean "Textsearch support" - - config TEXTSEARCH_KMP -- tristate -+ tristate "Textsearch KMP" - - config TEXTSEARCH_BM -- tristate -+ tristate "Textsearch BM" - - config TEXTSEARCH_FSM -- tristate -+ tristate "Textsearch FSM" - - config BTREE - bool diff --git a/target/linux/generic/pending-4.4/255-lib80211_kconfig_hacks.patch b/target/linux/generic/pending-4.4/255-lib80211_kconfig_hacks.patch deleted file mode 100644 index be75806e6b..0000000000 --- a/target/linux/generic/pending-4.4/255-lib80211_kconfig_hacks.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/net/wireless/Kconfig -+++ b/net/wireless/Kconfig -@@ -201,7 +201,7 @@ config CFG80211_WEXT_EXPORT - wext compatibility symbols to be exported. - - config LIB80211 -- tristate -+ tristate "LIB80211" - default n - help - This options enables a library of common routines used -@@ -210,13 +210,16 @@ config LIB80211 - Drivers should select this themselves if needed. - - config LIB80211_CRYPT_WEP -- tristate -+ tristate "LIB80211_CRYPT_WEP" -+ select LIB80211 - - config LIB80211_CRYPT_CCMP -- tristate -+ tristate "LIB80211_CRYPT_CCMP" -+ select LIB80211 - - config LIB80211_CRYPT_TKIP -- tristate -+ tristate "LIB80211_CRYPT_TKIP" -+ select LIB80211 - - config LIB80211_DEBUG - bool "lib80211 debugging messages" diff --git a/target/linux/generic/pending-4.4/256-crypto_add_kconfig_prompts.patch b/target/linux/generic/pending-4.4/256-crypto_add_kconfig_prompts.patch deleted file mode 100644 index fb5d5dc4b4..0000000000 --- a/target/linux/generic/pending-4.4/256-crypto_add_kconfig_prompts.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/crypto/Kconfig -+++ b/crypto/Kconfig -@@ -32,7 +32,7 @@ config CRYPTO_FIPS - this is. - - config CRYPTO_ALGAPI -- tristate -+ tristate "ALGAPI" - select CRYPTO_ALGAPI2 - help - This option provides the API for cryptographic algorithms. -@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2 - tristate - - config CRYPTO_AEAD -- tristate -+ tristate "AEAD" - select CRYPTO_AEAD2 - select CRYPTO_ALGAPI - -@@ -52,7 +52,7 @@ config CRYPTO_AEAD2 - select CRYPTO_RNG2 - - config CRYPTO_BLKCIPHER -- tristate -+ tristate "BLKCIPHER" - select CRYPTO_BLKCIPHER2 - select CRYPTO_ALGAPI - -@@ -63,7 +63,7 @@ config CRYPTO_BLKCIPHER2 - select CRYPTO_WORKQUEUE - - config CRYPTO_HASH -- tristate -+ tristate "HASH" - select CRYPTO_HASH2 - select CRYPTO_ALGAPI - -@@ -72,7 +72,7 @@ config CRYPTO_HASH2 - select CRYPTO_ALGAPI2 - - config CRYPTO_RNG -- tristate -+ tristate "RNG" - select CRYPTO_RNG2 - select CRYPTO_ALGAPI - diff --git a/target/linux/generic/pending-4.4/257-wireless_ext_kconfig_hack.patch b/target/linux/generic/pending-4.4/257-wireless_ext_kconfig_hack.patch deleted file mode 100644 index daac5898ae..0000000000 --- a/target/linux/generic/pending-4.4/257-wireless_ext_kconfig_hack.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/net/wireless/Kconfig -+++ b/net/wireless/Kconfig -@@ -1,5 +1,5 @@ - config WIRELESS_EXT -- bool -+ bool "Wireless extensions" - - config WEXT_CORE - def_bool y -@@ -11,10 +11,10 @@ config WEXT_PROC - depends on WEXT_CORE - - config WEXT_SPY -- bool -+ bool "WEXT_SPY" - - config WEXT_PRIV -- bool -+ bool "WEXT_PRIV" - - config CFG80211 - tristate "cfg80211 - wireless configuration API" diff --git a/target/linux/generic/pending-4.4/258-netfilter_netlink_kconfig_hack.patch b/target/linux/generic/pending-4.4/258-netfilter_netlink_kconfig_hack.patch deleted file mode 100644 index 4206c9a74a..0000000000 --- a/target/linux/generic/pending-4.4/258-netfilter_netlink_kconfig_hack.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -10,7 +10,7 @@ config NETFILTER_INGRESS - infrastructure. - - config NETFILTER_NETLINK -- tristate -+ tristate "Netfilter NFNETLINK interface" - - config NETFILTER_NETLINK_ACCT - tristate "Netfilter NFACCT over NFNETLINK interface" diff --git a/target/linux/generic/pending-4.4/259-regmap_dynamic.patch b/target/linux/generic/pending-4.4/259-regmap_dynamic.patch deleted file mode 100644 index 42a9728567..0000000000 --- a/target/linux/generic/pending-4.4/259-regmap_dynamic.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- a/drivers/base/regmap/Kconfig -+++ b/drivers/base/regmap/Kconfig -@@ -3,9 +3,8 @@ - # subsystems should select the appropriate symbols. - - config REGMAP -- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ) - select IRQ_DOMAIN if REGMAP_IRQ -- bool -+ tristate "Regmap" - - config REGCACHE_COMPRESSED - select LZO_COMPRESS -@@ -16,19 +15,25 @@ config REGMAP_AC97 - tristate - - config REGMAP_I2C -- tristate -+ tristate "Regmap I2C" -+ select REGMAP - depends on I2C - - config REGMAP_SPI -- tristate -+ tristate "Regmap SPI" -+ select REGMAP -+ depends on SPI_MASTER - depends on SPI - - config REGMAP_SPMI -+ select REGMAP - tristate - depends on SPMI - - config REGMAP_MMIO -- tristate -+ tristate "Regmap MMIO" -+ select REGMAP - - config REGMAP_IRQ -+ select REGMAP - bool ---- a/include/linux/regmap.h -+++ b/include/linux/regmap.h -@@ -65,7 +65,7 @@ struct reg_sequence { - unsigned int delay_us; - }; - --#ifdef CONFIG_REGMAP -+#if IS_ENABLED(CONFIG_REGMAP) - - enum regmap_endian { - /* Unspecified -> 0 -> Backwards compatible default */ ---- a/drivers/base/regmap/Makefile -+++ b/drivers/base/regmap/Makefile -@@ -1,10 +1,14 @@ - # For include/trace/define_trace.h to include trace.h - CFLAGS_regmap.o := -I$(src) - --obj-$(CONFIG_REGMAP) += regmap.o regcache.o --obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o --obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o --obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o -+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o -+ifdef CONFIG_DEBUG_FS -+regmap-core-objs += regmap-debugfs.o -+endif -+ifdef CONFIG_REGCACHE_COMPRESSED -+regmap-core-objs += regcache-lzo.o -+endif -+obj-$(CONFIG_REGMAP) += regmap-core.o - obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o - obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o - obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o ---- a/drivers/base/regmap/regmap.c -+++ b/drivers/base/regmap/regmap.c -@@ -13,6 +13,7 @@ - #include <linux/device.h> - #include <linux/slab.h> - #include <linux/export.h> -+#include <linux/module.h> - #include <linux/mutex.h> - #include <linux/err.h> - #include <linux/of.h> -@@ -2869,3 +2870,5 @@ static int __init regmap_initcall(void) - return 0; - } - postcore_initcall(regmap_initcall); -+ -+MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/pending-4.4/260-crypto_test_dependencies.patch b/target/linux/generic/pending-4.4/260-crypto_test_dependencies.patch deleted file mode 100644 index 54b8730a93..0000000000 --- a/target/linux/generic/pending-4.4/260-crypto_test_dependencies.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/crypto/Kconfig -+++ b/crypto/Kconfig -@@ -118,12 +118,12 @@ config CRYPTO_MANAGER - cbc(aes). - - config CRYPTO_MANAGER2 -- def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y) -- select CRYPTO_AEAD2 -- select CRYPTO_HASH2 -- select CRYPTO_BLKCIPHER2 -- select CRYPTO_PCOMP2 -- select CRYPTO_AKCIPHER2 -+ def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS) -+ select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS -+ select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS -+ select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS -+ select CRYPTO_PCOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS -+ select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS - - config CRYPTO_USER - tristate "Userspace cryptographic algorithm configuration" -@@ -136,7 +136,6 @@ config CRYPTO_USER - config CRYPTO_MANAGER_DISABLE_TESTS - bool "Disable run-time self tests" - default y -- depends on CRYPTO_MANAGER2 - help - Disable run-time self tests that normally take place at - algorithm registration. ---- a/crypto/algboss.c -+++ b/crypto/algboss.c -@@ -248,12 +248,16 @@ static int cryptomgr_schedule_test(struc - type = alg->cra_flags; - - /* This piece of crap needs to disappear into per-type test hooks. */ -+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS -+ type |= CRYPTO_ALG_TESTED; -+#else - if (!((type ^ CRYPTO_ALG_TYPE_BLKCIPHER) & - CRYPTO_ALG_TYPE_BLKCIPHER_MASK) && !(type & CRYPTO_ALG_GENIV) && - ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == - CRYPTO_ALG_TYPE_BLKCIPHER ? alg->cra_blkcipher.ivsize : - alg->cra_ablkcipher.ivsize)) - type |= CRYPTO_ALG_TESTED; -+#endif - - param->type = type; - diff --git a/target/linux/generic/pending-4.4/270-uapi-libc-compat-add-fallback-for-unsupported-libcs.patch b/target/linux/generic/pending-4.4/270-uapi-libc-compat-add-fallback-for-unsupported-libcs.patch deleted file mode 100644 index 06ad9bba9d..0000000000 --- a/target/linux/generic/pending-4.4/270-uapi-libc-compat-add-fallback-for-unsupported-libcs.patch +++ /dev/null @@ -1,130 +0,0 @@ -From c6bdd0d302119819de72439972d0462c26ef9eda Mon Sep 17 00:00:00 2001 -From: Felix Janda <felix.janda@posteo.de> -Date: Sun, 12 Nov 2017 13:30:17 -0500 -Subject: uapi libc compat: add fallback for unsupported libcs - -libc-compat.h aims to prevent symbol collisions between uapi and libc -headers for each supported libc. This requires continuous coordination -between them. - -The goal of this commit is to improve the situation for libcs (such as -musl) which are not yet supported and/or do not wish to be explicitly -supported, while not affecting supported libcs. More precisely, with -this commit, unsupported libcs can request the suppression of any -specific uapi definition by defining the correspondings _UAPI_DEF_* -macro as 0. This can fix symbol collisions for them, as long as the -libc headers are included before the uapi headers. Inclusion in the -other order is outside the scope of this commit. - -All infrastructure in order to enable this fallback for unsupported -libcs is already in place, except that libc-compat.h unconditionally -defines all _UAPI_DEF_* macros to 1 for all unsupported libcs so that -any previous definitions are ignored. In order to fix this, this commit -merely makes these definitions conditional. - -This commit together with the musl libc commit - -http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258 - -fixes for example the following compiler errors when <linux/in6.h> is -included after musl's <netinet/in.h>: - -./linux/in6.h:32:8: error: redefinition of 'struct in6_addr' -./linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6' -./linux/in6.h:59:8: error: redefinition of 'struct ipv6_mreq' - -The comments referencing glibc are still correct, but this file is not -only used for glibc any more. - -Signed-off-by: Felix Janda <felix.janda@posteo.de> -Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - include/uapi/linux/libc-compat.h | 55 +++++++++++++++++++++++++++++++++++++++- - 1 file changed, 54 insertions(+), 1 deletion(-) - ---- a/include/uapi/linux/libc-compat.h -+++ b/include/uapi/linux/libc-compat.h -@@ -148,39 +148,82 @@ - - /* If we did not see any headers from any supported C libraries, - * or we are being included in the kernel, then define everything -- * that we need. */ -+ * that we need. Check for previous __UAPI_* definitions to give -+ * unsupported C libraries a way to opt out of any kernel definition. */ - #else /* !defined(__GLIBC__) */ - - /* Definitions for if.h */ -+#ifndef __UAPI_DEF_IF_IFCONF - #define __UAPI_DEF_IF_IFCONF 1 -+#endif -+#ifndef __UAPI_DEF_IF_IFMAP - #define __UAPI_DEF_IF_IFMAP 1 -+#endif -+#ifndef __UAPI_DEF_IF_IFNAMSIZ - #define __UAPI_DEF_IF_IFNAMSIZ 1 -+#endif -+#ifndef __UAPI_DEF_IF_IFREQ - #define __UAPI_DEF_IF_IFREQ 1 -+#endif - /* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ -+#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS - #define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 -+#endif - /* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ -+#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO - #define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 -+#endif - - /* Definitions for in.h */ -+#ifndef __UAPI_DEF_IN_ADDR - #define __UAPI_DEF_IN_ADDR 1 -+#endif -+#ifndef __UAPI_DEF_IN_IPPROTO - #define __UAPI_DEF_IN_IPPROTO 1 -+#endif -+#ifndef __UAPI_DEF_IN_PKTINFO - #define __UAPI_DEF_IN_PKTINFO 1 -+#endif -+#ifndef __UAPI_DEF_IP_MREQ - #define __UAPI_DEF_IP_MREQ 1 -+#endif -+#ifndef __UAPI_DEF_SOCKADDR_IN - #define __UAPI_DEF_SOCKADDR_IN 1 -+#endif -+#ifndef __UAPI_DEF_IN_CLASS - #define __UAPI_DEF_IN_CLASS 1 -+#endif - - /* Definitions for in6.h */ -+#ifndef __UAPI_DEF_IN6_ADDR - #define __UAPI_DEF_IN6_ADDR 1 -+#endif -+#ifndef __UAPI_DEF_IN6_ADDR_ALT - #define __UAPI_DEF_IN6_ADDR_ALT 1 -+#endif -+#ifndef __UAPI_DEF_SOCKADDR_IN6 - #define __UAPI_DEF_SOCKADDR_IN6 1 -+#endif -+#ifndef __UAPI_DEF_IPV6_MREQ - #define __UAPI_DEF_IPV6_MREQ 1 -+#endif -+#ifndef __UAPI_DEF_IPPROTO_V6 - #define __UAPI_DEF_IPPROTO_V6 1 -+#endif -+#ifndef __UAPI_DEF_IPV6_OPTIONS - #define __UAPI_DEF_IPV6_OPTIONS 1 -+#endif -+#ifndef __UAPI_DEF_IN6_PKTINFO - #define __UAPI_DEF_IN6_PKTINFO 1 -+#endif -+#ifndef __UAPI_DEF_IP6_MTUINFO - #define __UAPI_DEF_IP6_MTUINFO 1 -+#endif - - /* Definitions for xattr.h */ -+#ifndef __UAPI_DEF_XATTR - #define __UAPI_DEF_XATTR 1 -+#endif - - #endif /* __GLIBC__ */ - diff --git a/target/linux/generic/pending-4.4/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch b/target/linux/generic/pending-4.4/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch deleted file mode 100644 index 21494b9256..0000000000 --- a/target/linux/generic/pending-4.4/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 649affd04813c43e0a72886517fcfccd63230981 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Mon, 29 Jun 2015 16:53:03 +0200 -Subject: uapi/if_ether.h: prevent redefinition of struct ethhdr - -Musl provides its own ethhdr struct definition. Add a guard to prevent -its definition of the appropriate musl header has already been included. - -glibc does not implement this header, but when glibc will implement this -they can just define __UAPI_DEF_ETHHDR 0 to make it work with the -kernel. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - include/uapi/linux/if_ether.h | 3 +++ - include/uapi/linux/libc-compat.h | 6 ++++++ - 2 files changed, 9 insertions(+) - ---- a/include/uapi/linux/if_ether.h -+++ b/include/uapi/linux/if_ether.h -@@ -22,6 +22,7 @@ - #define _UAPI_LINUX_IF_ETHER_H - - #include <linux/types.h> -+#include <linux/libc-compat.h> - - /* - * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble -@@ -135,11 +136,13 @@ - * This is an Ethernet frame header. - */ - -+#if __UAPI_DEF_ETHHDR - struct ethhdr { - unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ - unsigned char h_source[ETH_ALEN]; /* source ether addr */ - __be16 h_proto; /* packet type ID field */ - } __attribute__((packed)); -+#endif - - - #endif /* _UAPI_LINUX_IF_ETHER_H */ ---- a/include/uapi/linux/libc-compat.h -+++ b/include/uapi/linux/libc-compat.h -@@ -227,4 +227,10 @@ - - #endif /* __GLIBC__ */ - -+/* Definitions for if_ether.h */ -+/* allow libcs like musl to deactivate this, glibc does not implement this. */ -+#ifndef __UAPI_DEF_ETHHDR -+#define __UAPI_DEF_ETHHDR 1 -+#endif -+ - #endif /* _UAPI_LIBC_COMPAT_H */ diff --git a/target/linux/generic/pending-4.4/280-rfkill-stubs.patch b/target/linux/generic/pending-4.4/280-rfkill-stubs.patch deleted file mode 100644 index 96a98e219a..0000000000 --- a/target/linux/generic/pending-4.4/280-rfkill-stubs.patch +++ /dev/null @@ -1,79 +0,0 @@ ---- a/net/rfkill/Kconfig -+++ b/net/rfkill/Kconfig -@@ -1,7 +1,11 @@ - # - # RF switch subsystem configuration - # --menuconfig RFKILL -+config RFKILL -+ bool -+ default y -+ -+menuconfig RFKILL_FULL - tristate "RF switch subsystem support" - help - Say Y here if you want to have control over RF switches -@@ -13,19 +17,19 @@ menuconfig RFKILL - # LED trigger support - config RFKILL_LEDS - bool -- depends on RFKILL -+ depends on RFKILL_FULL - depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS - default y - - config RFKILL_INPUT - bool "RF switch input support" if EXPERT -- depends on RFKILL -+ depends on RFKILL_FULL - depends on INPUT = y || RFKILL = INPUT - default y if !EXPERT - - config RFKILL_REGULATOR - tristate "Generic rfkill regulator driver" -- depends on RFKILL || !RFKILL -+ depends on RFKILL_FULL || !RFKILL_FULL - depends on REGULATOR - help - This options enable controlling radio transmitters connected to -@@ -36,7 +40,7 @@ config RFKILL_REGULATOR - - config RFKILL_GPIO - tristate "GPIO RFKILL driver" -- depends on RFKILL -+ depends on RFKILL_FULL - depends on GPIOLIB || COMPILE_TEST - default n - help ---- a/net/rfkill/Makefile -+++ b/net/rfkill/Makefile -@@ -4,6 +4,6 @@ - - rfkill-y += core.o - rfkill-$(CONFIG_RFKILL_INPUT) += input.o --obj-$(CONFIG_RFKILL) += rfkill.o -+obj-$(CONFIG_RFKILL_FULL) += rfkill.o - obj-$(CONFIG_RFKILL_REGULATOR) += rfkill-regulator.o - obj-$(CONFIG_RFKILL_GPIO) += rfkill-gpio.o ---- a/net/Makefile -+++ b/net/Makefile -@@ -49,7 +49,7 @@ obj-$(CONFIG_MAC80211) += mac80211/ - obj-$(CONFIG_TIPC) += tipc/ - obj-$(CONFIG_NETLABEL) += netlabel/ - obj-$(CONFIG_IUCV) += iucv/ --obj-$(CONFIG_RFKILL) += rfkill/ -+obj-$(CONFIG_RFKILL_FULL) += rfkill/ - obj-$(CONFIG_NET_9P) += 9p/ - obj-$(CONFIG_CAIF) += caif/ - ifneq ($(CONFIG_DCB),) ---- a/include/linux/rfkill.h -+++ b/include/linux/rfkill.h -@@ -64,7 +64,7 @@ struct rfkill_ops { - int (*set_block)(void *data, bool blocked); - }; - --#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) -+#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE) - /** - * rfkill_alloc - allocate rfkill structure - * @name: name of the struct -- the string is not copied internally diff --git a/target/linux/generic/pending-4.4/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-4.4/300-mips_expose_boot_raw.patch deleted file mode 100644 index 0980c26d50..0000000000 --- a/target/linux/generic/pending-4.4/300-mips_expose_boot_raw.patch +++ /dev/null @@ -1,39 +0,0 @@ -From: Mark Miller <mark@mirell.org> - -This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on -certain Broadcom chipsets running CFE in order to load the kernel. - -Signed-off-by: Mark Miller <mark@mirell.org> -Acked-by: Rob Landley <rob@landley.net> ---- ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -1033,9 +1033,6 @@ config FW_ARC - config ARCH_MAY_HAVE_PC_FDC - bool - --config BOOT_RAW -- bool -- - config CEVT_BCM1480 - bool - -@@ -2793,6 +2790,18 @@ choice - bool "Bootloader kernel arguments if available" - endchoice - -+config BOOT_RAW -+ bool "Enable the kernel to be executed from the load address" -+ default n -+ help -+ Allow the kernel to be executed from the load address for -+ bootloaders which cannot read the ELF format. This places -+ a jump to start_kernel at the load address. -+ -+ If unsure, say N. -+ -+ -+ - endmenu - - config LOCKDEP_SUPPORT diff --git a/target/linux/generic/pending-4.4/301-mips_image_cmdline_hack.patch b/target/linux/generic/pending-4.4/301-mips_image_cmdline_hack.patch deleted file mode 100644 index 625a84c814..0000000000 --- a/target/linux/generic/pending-4.4/301-mips_image_cmdline_hack.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -1124,6 +1124,10 @@ config SYNC_R4K - config MIPS_MACHINE - def_bool n - -+config IMAGE_CMDLINE_HACK -+ bool "OpenWrt specific image command line hack" -+ default n -+ - config NO_IOPORT_MAP - def_bool n - ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -80,6 +80,12 @@ FEXPORT(__kernel_entry) - j kernel_entry - #endif - -+#ifdef CONFIG_IMAGE_CMDLINE_HACK -+ .ascii "CMDLINE:" -+EXPORT(__image_cmdline) -+ .fill 0x400 -+#endif /* CONFIG_IMAGE_CMDLINE_HACK */ -+ - __REF - - NESTED(kernel_entry, 16, sp) # kernel entry point diff --git a/target/linux/generic/pending-4.4/302-mips_no_branch_likely.patch b/target/linux/generic/pending-4.4/302-mips_no_branch_likely.patch deleted file mode 100644 index 44c6b04fcf..0000000000 --- a/target/linux/generic/pending-4.4/302-mips_no_branch_likely.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -87,7 +87,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin - # machines may also. Since BFD is incredibly buggy with respect to - # crossformat linking we rely on the elf2ecoff tool for format conversion. - # --cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -+cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely - cflags-y += -msoft-float - LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections - KBUILD_AFLAGS_MODULE += -mlong-calls diff --git a/target/linux/generic/pending-4.4/304-mips_disable_fpu.patch b/target/linux/generic/pending-4.4/304-mips_disable_fpu.patch deleted file mode 100644 index a08564dcea..0000000000 --- a/target/linux/generic/pending-4.4/304-mips_disable_fpu.patch +++ /dev/null @@ -1,106 +0,0 @@ -From: Manuel Lauss <manuel.lauss@gmail.com> -Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional -Date: Mon, 7 Apr 2014 12:57:04 +0200 -Message-Id: <1396868224-252888-2-git-send-email-manuel.lauss@gmail.com> - -This small patch makes the MIPS FPU emulator optional. The kernel -kills float-users on systems without a hardware FPU by sending a SIGILL. - -Disabling the emulator shrinks vmlinux by about 54kBytes (32bit, -optimizing for size). - -Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> ---- -v4: rediffed because of patch 1/2, should now work with micromips as well -v3: updated patch description with size savings. -v2: incorporated changes suggested by Jonas Gorski - force the fpu emulator on for micromips: relocating the parts - of the mmips code in the emulator to other areas would be a - much larger change; I went the cheap route instead with this. - - arch/mips/Kbuild | 2 +- - arch/mips/Kconfig | 14 ++++++++++++++ - arch/mips/include/asm/fpu.h | 5 +++-- - arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++ - 4 files changed, 33 insertions(+), 3 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -2725,6 +2725,20 @@ config MIPS_O32_FP64_SUPPORT - - If unsure, say N. - -+config MIPS_FPU_EMULATOR -+ bool "MIPS FPU Emulator" -+ default y -+ help -+ This option lets you disable the built-in MIPS FPU (Coprocessor 1) -+ emulator, which handles floating-point instructions on processors -+ without a hardware FPU. It is generally a good idea to keep the -+ emulator built-in, unless you are perfectly sure you have a -+ complete soft-float environment. With the emulator disabled, all -+ users of float operations will be killed with an illegal instr- -+ uction exception. -+ -+ Say Y, please. -+ - config USE_OF - bool - select OF ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -285,7 +285,7 @@ OBJCOPYFLAGS += --remove-section=.regin - head-y := arch/mips/kernel/head.o - - libs-y += arch/mips/lib/ --libs-y += arch/mips/math-emu/ -+libs-$(CONFIG_MIPS_FPU_EMULATOR) += arch/mips/math-emu/ - - # See arch/mips/Kbuild for content of core part of the kernel - core-y += arch/mips/ ---- a/arch/mips/include/asm/fpu.h -+++ b/arch/mips/include/asm/fpu.h -@@ -223,8 +223,10 @@ static inline int init_fpu(void) - /* Restore FRE */ - write_c0_config5(config5); - enable_fpu_hazard(); -- } else -+ } else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR)) - fpu_emulator_init_fpu(); -+ else -+ ret = SIGILL; - - return ret; - } ---- a/arch/mips/include/asm/fpu_emulator.h -+++ b/arch/mips/include/asm/fpu_emulator.h -@@ -30,6 +30,7 @@ - #include <asm/local.h> - #include <asm/processor.h> - -+#ifdef CONFIG_MIPS_FPU_EMULATOR - #ifdef CONFIG_DEBUG_FS - - struct mips_fpu_emulator_stats { -@@ -66,6 +67,21 @@ extern int do_dsemulret(struct pt_regs * - extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, - struct mips_fpu_struct *ctx, int has_fpu, - void *__user *fault_addr); -+#else /* no CONFIG_MIPS_FPU_EMULATOR */ -+static inline int do_dsemulret(struct pt_regs *xcp) -+{ -+ return 0; /* 0 means error, should never get here anyway */ -+} -+ -+static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp, -+ struct mips_fpu_struct *ctx, int has_fpu, -+ void *__user *fault_addr) -+{ -+ *fault_addr = NULL; -+ return SIGILL; /* we don't speak MIPS FPU */ -+} -+#endif /* CONFIG_MIPS_FPU_EMULATOR */ -+ - int process_fpemu_return(int sig, void __user *fault_addr, - unsigned long fcr31); - int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, diff --git a/target/linux/generic/pending-4.4/305-mips_module_reloc.patch b/target/linux/generic/pending-4.4/305-mips_module_reloc.patch deleted file mode 100644 index 944921fff7..0000000000 --- a/target/linux/generic/pending-4.4/305-mips_module_reloc.patch +++ /dev/null @@ -1,355 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -90,8 +90,13 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin - cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely - cflags-y += -msoft-float - LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections -+ifdef CONFIG_64BIT - KBUILD_AFLAGS_MODULE += -mlong-calls - KBUILD_CFLAGS_MODULE += -mlong-calls -+else -+KBUILD_AFLAGS_MODULE += -mno-long-calls -+KBUILD_CFLAGS_MODULE += -mno-long-calls -+endif - - ifndef CONFIG_FUNCTION_TRACER - KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections ---- a/arch/mips/include/asm/module.h -+++ b/arch/mips/include/asm/module.h -@@ -11,6 +11,11 @@ struct mod_arch_specific { - const struct exception_table_entry *dbe_start; - const struct exception_table_entry *dbe_end; - struct mips_hi16 *r_mips_hi16_list; -+ -+ void *phys_plt_tbl; -+ void *virt_plt_tbl; -+ unsigned int phys_plt_offset; -+ unsigned int virt_plt_offset; - }; - - typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ ---- a/arch/mips/kernel/module.c -+++ b/arch/mips/kernel/module.c -@@ -43,14 +43,221 @@ struct mips_hi16 { - static LIST_HEAD(dbe_list); - static DEFINE_SPINLOCK(dbe_lock); - --#ifdef MODULE_START -+/* -+ * Get the potential max trampolines size required of the init and -+ * non-init sections. Only used if we cannot find enough contiguous -+ * physically mapped memory to put the module into. -+ */ -+static unsigned int -+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, -+ const char *secstrings, unsigned int symindex, bool is_init) -+{ -+ unsigned long ret = 0; -+ unsigned int i, j; -+ Elf_Sym *syms; -+ -+ /* Everything marked ALLOC (this includes the exported symbols) */ -+ for (i = 1; i < hdr->e_shnum; ++i) { -+ unsigned int info = sechdrs[i].sh_info; -+ -+ if (sechdrs[i].sh_type != SHT_REL -+ && sechdrs[i].sh_type != SHT_RELA) -+ continue; -+ -+ /* Not a valid relocation section? */ -+ if (info >= hdr->e_shnum) -+ continue; -+ -+ /* Don't bother with non-allocated sections */ -+ if (!(sechdrs[info].sh_flags & SHF_ALLOC)) -+ continue; -+ -+ /* If it's called *.init*, and we're not init, we're -+ not interested */ -+ if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0) -+ != is_init) -+ continue; -+ -+ syms = (Elf_Sym *) sechdrs[symindex].sh_addr; -+ if (sechdrs[i].sh_type == SHT_REL) { -+ Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr; -+ unsigned int size = sechdrs[i].sh_size / sizeof(*rel); -+ -+ for (j = 0; j < size; ++j) { -+ Elf_Sym *sym; -+ -+ if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26) -+ continue; -+ -+ sym = syms + ELF_MIPS_R_SYM(rel[j]); -+ if (!is_init && sym->st_shndx != SHN_UNDEF) -+ continue; -+ -+ ret += 4 * sizeof(int); -+ } -+ } else { -+ Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr; -+ unsigned int size = sechdrs[i].sh_size / sizeof(*rela); -+ -+ for (j = 0; j < size; ++j) { -+ Elf_Sym *sym; -+ -+ if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26) -+ continue; -+ -+ sym = syms + ELF_MIPS_R_SYM(rela[j]); -+ if (!is_init && sym->st_shndx != SHN_UNDEF) -+ continue; -+ -+ ret += 4 * sizeof(int); -+ } -+ } -+ } -+ -+ return ret; -+} -+ -+#ifndef MODULE_START -+static void *alloc_phys(unsigned long size) -+{ -+ unsigned order; -+ struct page *page; -+ struct page *p; -+ -+ size = PAGE_ALIGN(size); -+ order = get_order(size); -+ -+ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN | -+ __GFP_THISNODE, order); -+ if (!page) -+ return NULL; -+ -+ split_page(page, order); -+ -+ /* mark all pages except for the last one */ -+ for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p) -+ set_bit(PG_owner_priv_1, &p->flags); -+ -+ for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p) -+ __free_page(p); -+ -+ return page_address(page); -+} -+#endif -+ -+static void free_phys(void *ptr) -+{ -+ struct page *page; -+ bool free; -+ -+ page = virt_to_page(ptr); -+ do { -+ free = test_and_clear_bit(PG_owner_priv_1, &page->flags); -+ __free_page(page); -+ page++; -+ } while (free); -+} -+ -+ - void *module_alloc(unsigned long size) - { -+#ifdef MODULE_START - return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END, - GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE, - __builtin_return_address(0)); -+#else -+ void *ptr; -+ -+ if (size == 0) -+ return NULL; -+ -+ ptr = alloc_phys(size); -+ -+ /* If we failed to allocate physically contiguous memory, -+ * fall back to regular vmalloc. The module loader code will -+ * create jump tables to handle long jumps */ -+ if (!ptr) -+ return vmalloc(size); -+ -+ return ptr; -+#endif - } -+ -+static inline bool is_phys_addr(void *ptr) -+{ -+#ifdef CONFIG_64BIT -+ return (KSEGX((unsigned long)ptr) == CKSEG0); -+#else -+ return (KSEGX(ptr) == KSEG0); - #endif -+} -+ -+/* Free memory returned from module_alloc */ -+void module_memfree(void *module_region) -+{ -+ if (is_phys_addr(module_region)) -+ free_phys(module_region); -+ else -+ vfree(module_region); -+} -+ -+static void *__module_alloc(int size, bool phys) -+{ -+ void *ptr; -+ -+ if (phys) -+ ptr = kmalloc(size, GFP_KERNEL); -+ else -+ ptr = vmalloc(size); -+ return ptr; -+} -+ -+static void __module_free(void *ptr) -+{ -+ if (is_phys_addr(ptr)) -+ kfree(ptr); -+ else -+ vfree(ptr); -+} -+ -+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, -+ char *secstrings, struct module *mod) -+{ -+ unsigned int symindex = 0; -+ unsigned int core_size, init_size; -+ int i; -+ -+ mod->arch.phys_plt_offset = 0; -+ mod->arch.virt_plt_offset = 0; -+ mod->arch.phys_plt_tbl = NULL; -+ mod->arch.virt_plt_tbl = NULL; -+ -+ if (IS_ENABLED(CONFIG_64BIT)) -+ return 0; -+ -+ for (i = 1; i < hdr->e_shnum; i++) -+ if (sechdrs[i].sh_type == SHT_SYMTAB) -+ symindex = i; -+ -+ core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false); -+ init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true); -+ -+ if ((core_size + init_size) == 0) -+ return 0; -+ -+ mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1); -+ if (!mod->arch.phys_plt_tbl) -+ return -ENOMEM; -+ -+ mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0); -+ if (!mod->arch.virt_plt_tbl) { -+ __module_free(mod->arch.phys_plt_tbl); -+ mod->arch.phys_plt_tbl = NULL; -+ return -ENOMEM; -+ } -+ -+ return 0; -+} - - int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v) - { -@@ -64,8 +271,39 @@ static int apply_r_mips_32_rel(struct mo - return 0; - } - -+static Elf_Addr add_plt_entry_to(unsigned *plt_offset, -+ void *start, Elf_Addr v) -+{ -+ unsigned *tramp = start + *plt_offset; -+ *plt_offset += 4 * sizeof(int); -+ -+ /* adjust carry for addiu */ -+ if (v & 0x00008000) -+ v += 0x10000; -+ -+ tramp[0] = 0x3c190000 | (v >> 16); /* lui t9, hi16 */ -+ tramp[1] = 0x27390000 | (v & 0xffff); /* addiu t9, t9, lo16 */ -+ tramp[2] = 0x03200008; /* jr t9 */ -+ tramp[3] = 0x00000000; /* nop */ -+ -+ return (Elf_Addr) tramp; -+} -+ -+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v) -+{ -+ if (is_phys_addr(location)) -+ return add_plt_entry_to(&me->arch.phys_plt_offset, -+ me->arch.phys_plt_tbl, v); -+ else -+ return add_plt_entry_to(&me->arch.virt_plt_offset, -+ me->arch.virt_plt_tbl, v); -+ -+} -+ - static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v) - { -+ u32 ofs = *location & 0x03ffffff; -+ - if (v % 4) { - pr_err("module %s: dangerous R_MIPS_26 REL relocation\n", - me->name); -@@ -73,14 +311,17 @@ static int apply_r_mips_26_rel(struct mo - } - - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { -- printk(KERN_ERR -- "module %s: relocation overflow\n", -- me->name); -- return -ENOEXEC; -+ v = add_plt_entry(me, location, v + (ofs << 2)); -+ if (!v) { -+ printk(KERN_ERR -+ "module %s: relocation overflow\n", me->name); -+ return -ENOEXEC; -+ } -+ ofs = 0; - } - - *location = (*location & ~0x03ffffff) | -- ((*location + (v >> 2)) & 0x03ffffff); -+ ((ofs + (v >> 2)) & 0x03ffffff); - - return 0; - } -@@ -287,9 +528,36 @@ int module_finalize(const Elf_Ehdr *hdr, - list_add(&me->arch.dbe_list, &dbe_list); - spin_unlock_irq(&dbe_lock); - } -+ -+ /* Get rid of the fixup trampoline if we're running the module -+ * from physically mapped address space */ -+ if (me->arch.phys_plt_offset == 0) { -+ __module_free(me->arch.phys_plt_tbl); -+ me->arch.phys_plt_tbl = NULL; -+ } -+ if (me->arch.virt_plt_offset == 0) { -+ __module_free(me->arch.virt_plt_tbl); -+ me->arch.virt_plt_tbl = NULL; -+ } -+ - return 0; - } - -+void module_arch_freeing_init(struct module *mod) -+{ -+ if (mod->state == MODULE_STATE_LIVE) -+ return; -+ -+ if (mod->arch.phys_plt_tbl) { -+ __module_free(mod->arch.phys_plt_tbl); -+ mod->arch.phys_plt_tbl = NULL; -+ } -+ if (mod->arch.virt_plt_tbl) { -+ __module_free(mod->arch.virt_plt_tbl); -+ mod->arch.virt_plt_tbl = NULL; -+ } -+} -+ - void module_arch_cleanup(struct module *mod) - { - spin_lock_irq(&dbe_lock); diff --git a/target/linux/generic/pending-4.4/306-mips_mem_functions_performance.patch b/target/linux/generic/pending-4.4/306-mips_mem_functions_performance.patch deleted file mode 100644 index 9818677425..0000000000 --- a/target/linux/generic/pending-4.4/306-mips_mem_functions_performance.patch +++ /dev/null @@ -1,83 +0,0 @@ ---- a/arch/mips/include/asm/string.h -+++ b/arch/mips/include/asm/string.h -@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__ - - #define __HAVE_ARCH_MEMSET - extern void *memset(void *__s, int __c, size_t __count); -+#define memset(__s, __c, len) \ -+({ \ -+ size_t __len = (len); \ -+ void *__ret; \ -+ if (__builtin_constant_p(len) && __len >= 64) \ -+ __ret = memset((__s), (__c), __len); \ -+ else \ -+ __ret = __builtin_memset((__s), (__c), __len); \ -+ __ret; \ -+}) - - #define __HAVE_ARCH_MEMCPY - extern void *memcpy(void *__to, __const__ void *__from, size_t __n); -+#define memcpy(dst, src, len) \ -+({ \ -+ size_t __len = (len); \ -+ void *__ret; \ -+ if (__builtin_constant_p(len) && __len >= 64) \ -+ __ret = memcpy((dst), (src), __len); \ -+ else \ -+ __ret = __builtin_memcpy((dst), (src), __len); \ -+ __ret; \ -+}) - - #define __HAVE_ARCH_MEMMOVE - extern void *memmove(void *__dest, __const__ void *__src, size_t __n); -+#define memmove(dst, src, len) \ -+({ \ -+ size_t __len = (len); \ -+ void *__ret; \ -+ if (__builtin_constant_p(len) && __len >= 64) \ -+ __ret = memmove((dst), (src), __len); \ -+ else \ -+ __ret = __builtin_memmove((dst), (src), __len); \ -+ __ret; \ -+}) -+ -+#define __HAVE_ARCH_MEMCMP -+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len)) - - #endif /* _ASM_STRING_H */ ---- a/arch/mips/lib/Makefile -+++ b/arch/mips/lib/Makefile -@@ -4,7 +4,7 @@ - - lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \ - mips-atomic.o strlen_user.o strncpy_user.o \ -- strnlen_user.o uncached.o -+ strnlen_user.o uncached.o memcmp.o - - obj-y += iomap.o - obj-$(CONFIG_PCI) += iomap-pci.o ---- /dev/null -+++ b/arch/mips/lib/memcmp.c -@@ -0,0 +1,22 @@ -+/* -+ * copied from linux/lib/string.c -+ * -+ * Copyright (C) 1991, 1992 Linus Torvalds -+ */ -+ -+#include <linux/module.h> -+#include <linux/string.h> -+ -+#undef memcmp -+int memcmp(const void *cs, const void *ct, size_t count) -+{ -+ const unsigned char *su1, *su2; -+ int res = 0; -+ -+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--) -+ if ((res = *su1 - *su2) != 0) -+ break; -+ return res; -+} -+EXPORT_SYMBOL(memcmp); -+ diff --git a/target/linux/generic/pending-4.4/307-mips_highmem_offset.patch b/target/linux/generic/pending-4.4/307-mips_highmem_offset.patch deleted file mode 100644 index 5a7dc9cee9..0000000000 --- a/target/linux/generic/pending-4.4/307-mips_highmem_offset.patch +++ /dev/null @@ -1,17 +0,0 @@ -Adjust highmem offset to 0x10000000 to ensure that all kmalloc allocations -stay within the same 256M boundary. This ensures that -mlong-calls is not -needed on systems with more than 256M RAM. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/arch/mips/include/asm/mach-generic/spaces.h -+++ b/arch/mips/include/asm/mach-generic/spaces.h -@@ -44,7 +44,7 @@ - * Memory above this physical address will be considered highmem. - */ - #ifndef HIGHMEM_START --#define HIGHMEM_START _AC(0x20000000, UL) -+#define HIGHMEM_START _AC(0x10000000, UL) - #endif - - #endif /* CONFIG_32BIT */ diff --git a/target/linux/generic/pending-4.4/308-mips32r2_tune.patch b/target/linux/generic/pending-4.4/308-mips32r2_tune.patch deleted file mode 100644 index f4ab89ef28..0000000000 --- a/target/linux/generic/pending-4.4/308-mips32r2_tune.patch +++ /dev/null @@ -1,17 +0,0 @@ -Add -mtune=34kc to MIPS CFLAGS when building for mips32r2 -This provides a good tradeoff across at least 24Kc-74Kc, while also -producing smaller code. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -145,7 +145,7 @@ cflags-$(CONFIG_CPU_R4X00) += -march=r46 - cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap - cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ - -Wa,-mips32 -Wa,--trap --cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -+cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2 -mtune=34kc,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ - -Wa,-mips32r2 -Wa,--trap - cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap - cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ diff --git a/target/linux/generic/pending-4.4/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-4.4/310-arm_module_unresolved_weak_sym.patch deleted file mode 100644 index 327a475208..0000000000 --- a/target/linux/generic/pending-4.4/310-arm_module_unresolved_weak_sym.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/arm/kernel/module.c -+++ b/arch/arm/kernel/module.c -@@ -88,6 +88,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons - return -ENOEXEC; - } - -+ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) && -+ ELF_ST_BIND(sym->st_info) == STB_WEAK) -+ continue; -+ - loc = dstsec->sh_addr + rel->r_offset; - - switch (ELF32_R_TYPE(rel->r_info)) { diff --git a/target/linux/generic/pending-4.4/320-ppc4xx_optimization.patch b/target/linux/generic/pending-4.4/320-ppc4xx_optimization.patch deleted file mode 100644 index c1ce37da2f..0000000000 --- a/target/linux/generic/pending-4.4/320-ppc4xx_optimization.patch +++ /dev/null @@ -1,31 +0,0 @@ -Upstream doesn't optimize the kernel and bootwrappers for ppc44x because -they still want to support gcc 3.3 -- well, we don't. - ---- a/arch/powerpc/Makefile -+++ b/arch/powerpc/Makefile -@@ -205,7 +205,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y) - KBUILD_CFLAGS += -mno-sched-epilog - endif - --cpu-as-$(CONFIG_4xx) += -Wa,-m405 -+cpu-as-$(CONFIG_40x) += -Wa,-m405 -+cpu-as-$(CONFIG_44x) += -Wa,-m440 - cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec - cpu-as-$(CONFIG_E200) += -Wa,-me200 - ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -48,10 +48,10 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob - DTC_FLAGS ?= -p 1024 - - $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 --$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 -+$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 --$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 --$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 -+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 -+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 diff --git a/target/linux/generic/pending-4.4/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/pending-4.4/321-powerpc_crtsavres_prereq.patch deleted file mode 100644 index a1773feb39..0000000000 --- a/target/linux/generic/pending-4.4/321-powerpc_crtsavres_prereq.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/powerpc/Makefile -+++ b/arch/powerpc/Makefile -@@ -167,7 +167,6 @@ CPP = $(CC) -E $(KBUILD_CFLAGS) - - CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ - --KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o - - ifeq ($(CONFIG_476FPE_ERR46),y) - KBUILD_LDFLAGS_MODULE += --ppc476-workaround \ diff --git a/target/linux/generic/pending-4.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-4.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch deleted file mode 100644 index a69d197e62..0000000000 --- a/target/linux/generic/pending-4.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch +++ /dev/null @@ -1,298 +0,0 @@ -From d8582dcf1ed66eee88a11e4760f42c0d6c8822be Mon Sep 17 00:00:00 2001 -From: Yousong Zhou <yszhou4tech@gmail.com> -Date: Sat, 31 Jan 2015 22:26:03 +0800 -Subject: [PATCH 331/331] MIPS: kexec: Accept command line parameters from - userspace. - -Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> ---- - arch/mips/kernel/machine_kexec.c | 153 +++++++++++++++++++++++++++++++----- - arch/mips/kernel/machine_kexec.h | 20 +++++ - arch/mips/kernel/relocate_kernel.S | 21 +++-- - 3 files changed, 167 insertions(+), 27 deletions(-) - create mode 100644 arch/mips/kernel/machine_kexec.h - ---- a/arch/mips/kernel/machine_kexec.c -+++ b/arch/mips/kernel/machine_kexec.c -@@ -10,45 +10,145 @@ - #include <linux/mm.h> - #include <linux/delay.h> - -+#include <asm/bootinfo.h> - #include <asm/cacheflush.h> - #include <asm/page.h> -- --extern const unsigned char relocate_new_kernel[]; --extern const size_t relocate_new_kernel_size; -- --extern unsigned long kexec_start_address; --extern unsigned long kexec_indirection_page; -+#include <asm/uaccess.h> -+#include "machine_kexec.h" - - int (*_machine_kexec_prepare)(struct kimage *) = NULL; - void (*_machine_kexec_shutdown)(void) = NULL; - void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL; -+ - #ifdef CONFIG_SMP - void (*relocated_kexec_smp_wait) (void *); - atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0); - #endif - --int --machine_kexec_prepare(struct kimage *kimage) -+static void machine_kexec_print_args(void) - { -+ unsigned long argc = (int)kexec_args[0]; -+ int i; -+ -+ pr_info("kexec_args[0] (argc): %lu\n", argc); -+ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]); -+ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]); -+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]); -+ -+ for (i = 0; i < argc; i++) { -+ pr_info("kexec_argv[%d] = %p, %s\n", -+ i, kexec_argv[i], kexec_argv[i]); -+ } -+} -+ -+static void machine_kexec_init_argv(struct kimage *image) -+{ -+ void __user *buf = NULL; -+ size_t bufsz; -+ size_t size; -+ int i; -+ -+ bufsz = 0; -+ for (i = 0; i < image->nr_segments; i++) { -+ struct kexec_segment *seg; -+ -+ seg = &image->segment[i]; -+ if (seg->bufsz < 6) -+ continue; -+ -+ if (strncmp((char *) seg->buf, "kexec ", 6)) -+ continue; -+ -+ buf = seg->buf; -+ bufsz = seg->bufsz; -+ break; -+ } -+ -+ if (!buf) -+ return; -+ -+ size = KEXEC_COMMAND_LINE_SIZE; -+ size = min(size, bufsz); -+ if (size < bufsz) -+ pr_warn("kexec command line truncated to %zd bytes\n", size); -+ -+ /* Copy to kernel space */ -+ copy_from_user(kexec_argv_buf, buf, size); -+ kexec_argv_buf[size - 1] = 0; -+} -+ -+static void machine_kexec_parse_argv(struct kimage *image) -+{ -+ char *reboot_code_buffer; -+ int reloc_delta; -+ char *ptr; -+ int argc; -+ int i; -+ -+ ptr = kexec_argv_buf; -+ argc = 0; -+ -+ /* -+ * convert command line string to array of parameters -+ * (as bootloader does). -+ */ -+ while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) { -+ if (*ptr == ' ') { -+ *ptr++ = '\0'; -+ continue; -+ } -+ -+ kexec_argv[argc++] = ptr; -+ ptr = strchr(ptr, ' '); -+ } -+ -+ if (!argc) -+ return; -+ -+ kexec_args[0] = argc; -+ kexec_args[1] = (unsigned long)kexec_argv; -+ kexec_args[2] = 0; -+ kexec_args[3] = 0; -+ -+ reboot_code_buffer = page_address(image->control_code_page); -+ reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel; -+ -+ kexec_args[1] += reloc_delta; -+ for (i = 0; i < argc; i++) -+ kexec_argv[i] += reloc_delta; -+} -+ -+int machine_kexec_prepare(struct kimage *kimage) -+{ -+ /* -+ * Whenever arguments passed from kexec-tools, Init the arguments as -+ * the original ones to try avoiding booting failure. -+ */ -+ -+ kexec_args[0] = fw_arg0; -+ kexec_args[1] = fw_arg1; -+ kexec_args[2] = fw_arg2; -+ kexec_args[3] = fw_arg3; -+ -+ machine_kexec_init_argv(kimage); -+ machine_kexec_parse_argv(kimage); -+ - if (_machine_kexec_prepare) - return _machine_kexec_prepare(kimage); - return 0; - } - --void --machine_kexec_cleanup(struct kimage *kimage) -+void machine_kexec_cleanup(struct kimage *kimage) - { - } - --void --machine_shutdown(void) -+void machine_shutdown(void) - { - if (_machine_kexec_shutdown) - _machine_kexec_shutdown(); - } - --void --machine_crash_shutdown(struct pt_regs *regs) -+void machine_crash_shutdown(struct pt_regs *regs) - { - if (_machine_crash_shutdown) - _machine_crash_shutdown(regs); -@@ -66,10 +166,12 @@ machine_kexec(struct kimage *image) - unsigned long *ptr; - - reboot_code_buffer = -- (unsigned long)page_address(image->control_code_page); -+ (unsigned long)page_address(image->control_code_page); -+ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer); - - kexec_start_address = - (unsigned long) phys_to_virt(image->start); -+ pr_info("kexec_start_address = %p\n", (void *)kexec_start_address); - - if (image->type == KEXEC_TYPE_DEFAULT) { - kexec_indirection_page = -@@ -77,9 +179,19 @@ machine_kexec(struct kimage *image) - } else { - kexec_indirection_page = (unsigned long)&image->head; - } -+ pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page); - -- memcpy((void*)reboot_code_buffer, relocate_new_kernel, -- relocate_new_kernel_size); -+ pr_info("Where is memcpy: %p\n", memcpy); -+ pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n", -+ (void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end); -+ pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE, -+ (void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer); -+ memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel, -+ KEXEC_RELOCATE_NEW_KERNEL_SIZE); -+ -+ pr_info("Before _print_args().\n"); -+ machine_kexec_print_args(); -+ pr_info("Before eval loop.\n"); - - /* - * The generic kexec code builds a page list with physical -@@ -98,15 +210,16 @@ machine_kexec(struct kimage *image) - /* - * we do not want to be bothered. - */ -+ pr_info("Before irq_disable.\n"); - local_irq_disable(); - -- printk("Will call new kernel at %08lx\n", image->start); -- printk("Bye ...\n"); -+ pr_info("Will call new kernel at %08lx\n", image->start); -+ pr_info("Bye ...\n"); - __flush_cache_all(); - #ifdef CONFIG_SMP - /* All secondary cpus now may jump to kexec_wait cycle */ - relocated_kexec_smp_wait = reboot_code_buffer + -- (void *)(kexec_smp_wait - relocate_new_kernel); -+ (void *)(kexec_smp_wait - kexec_relocate_new_kernel); - smp_wmb(); - atomic_set(&kexec_ready_to_reboot, 1); - #endif ---- /dev/null -+++ b/arch/mips/kernel/machine_kexec.h -@@ -0,0 +1,20 @@ -+#ifndef _MACHINE_KEXEC_H -+#define _MACHINE_KEXEC_H -+ -+#ifndef __ASSEMBLY__ -+extern const unsigned char kexec_relocate_new_kernel[]; -+extern unsigned long kexec_relocate_new_kernel_end; -+extern unsigned long kexec_start_address; -+extern unsigned long kexec_indirection_page; -+ -+extern char kexec_argv_buf[]; -+extern char *kexec_argv[]; -+ -+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE ((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel) -+#endif /* !__ASSEMBLY__ */ -+ -+#define KEXEC_COMMAND_LINE_SIZE 256 -+#define KEXEC_ARGV_SIZE (KEXEC_COMMAND_LINE_SIZE / 16) -+#define KEXEC_MAX_ARGC (KEXEC_ARGV_SIZE / sizeof(long)) -+ -+#endif ---- a/arch/mips/kernel/relocate_kernel.S -+++ b/arch/mips/kernel/relocate_kernel.S -@@ -12,8 +12,9 @@ - #include <asm/mipsregs.h> - #include <asm/stackframe.h> - #include <asm/addrspace.h> -+#include "machine_kexec.h" - --LEAF(relocate_new_kernel) -+LEAF(kexec_relocate_new_kernel) - PTR_L a0, arg0 - PTR_L a1, arg1 - PTR_L a2, arg2 -@@ -98,7 +99,7 @@ done: - #endif - /* jump to kexec_start_address */ - j s1 -- END(relocate_new_kernel) -+ END(kexec_relocate_new_kernel) - - #ifdef CONFIG_SMP - /* -@@ -184,9 +185,15 @@ kexec_indirection_page: - PTR 0 - .size kexec_indirection_page, PTRSIZE - --relocate_new_kernel_end: -+kexec_argv_buf: -+ EXPORT(kexec_argv_buf) -+ .skip KEXEC_COMMAND_LINE_SIZE -+ .size kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE -+ -+kexec_argv: -+ EXPORT(kexec_argv) -+ .skip KEXEC_ARGV_SIZE -+ .size kexec_argv, KEXEC_ARGV_SIZE - --relocate_new_kernel_size: -- EXPORT(relocate_new_kernel_size) -- PTR relocate_new_kernel_end - relocate_new_kernel -- .size relocate_new_kernel_size, PTRSIZE -+kexec_relocate_new_kernel_end: -+ EXPORT(kexec_relocate_new_kernel_end) diff --git a/target/linux/generic/pending-4.4/331-arc-remove-dependency-on-DEVTMPFS.patch b/target/linux/generic/pending-4.4/331-arc-remove-dependency-on-DEVTMPFS.patch deleted file mode 100644 index 48b3f9b428..0000000000 --- a/target/linux/generic/pending-4.4/331-arc-remove-dependency-on-DEVTMPFS.patch +++ /dev/null @@ -1,31 +0,0 @@ -From adfbf9e6cad93281cffceab078e7f6f2a8e094f9 Mon Sep 17 00:00:00 2001 -From: Alexey Brodkin <abrodkin@synopsys.com> -Date: Thu, 13 Aug 2015 01:56:02 +0300 -Subject: [PATCH 1/2] openwrt: arc - remove dependency on DEVTMPFS - -OpenWRT builds initramfs so that it doesn't require DEVTMPFS so dropping -this dependency. That helps to escape 2 separate kernel rebuilds with -and without initramfs. - -2 builds happen because OpenWRT first builds kernel and later modules. -When building entire kernel with simple "make" INITRAMFS sets to a real -value and so was triggering DEVTMPFS selection. Then when building only -modules with "make modules" command INITRAMFS is zeroed and so kernel -config was changing that lead to full kernel rebuild. - -Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> ---- - arch/arc/Kconfig | 2 -- - 1 file changed, 2 deletions(-) - ---- a/arch/arc/Kconfig -+++ b/arch/arc/Kconfig -@@ -12,8 +12,6 @@ config ARC - select BUILDTIME_EXTABLE_SORT - select COMMON_CLK - select CLONE_BACKWARDS -- # ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev -- select DEVTMPFS if !INITRAMFS_SOURCE="" - select GENERIC_ATOMIC64 - select GENERIC_CLOCKEVENTS - select GENERIC_FIND_FIRST_BIT diff --git a/target/linux/generic/pending-4.4/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-4.4/332-arc-add-OWRTDTB-section.patch deleted file mode 100644 index 5a2b67cfcd..0000000000 --- a/target/linux/generic/pending-4.4/332-arc-add-OWRTDTB-section.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 690e7f2cad271595ff68cace1c45fb10779bde41 Mon Sep 17 00:00:00 2001 -From: Alexey Brodkin <abrodkin@synopsys.com> -Date: Fri, 15 Jan 2016 00:34:01 +0300 -Subject: [PATCH 2/2] openwrt: arc - add OWRTDTB section - -This change allows OpenWRT to patch resulting kernel binary with -external .dtb. - -That allows us to re-use exactky the same vmlinux on different boards -given its ARC core configurations match (at least cache line sizes etc). - -""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external -.dtb right after it, keeping the string in place. - -Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> ---- - arch/arc/kernel/head.S | 10 ++++++++++ - arch/arc/kernel/setup.c | 4 +++- - arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++ - 3 files changed, 26 insertions(+), 1 deletion(-) - ---- a/arch/arc/kernel/head.S -+++ b/arch/arc/kernel/head.S -@@ -49,6 +49,16 @@ - 1: - .endm - -+; Here "patch-dtb" will embed external .dtb -+; Note "patch-dtb" searches for ASCII "OWRTDTB:" string -+; and pastes .dtb right after it, hense the string precedes -+; __image_dtb symbol. -+ .section .owrt, "aw",@progbits -+ .ascii "OWRTDTB:" -+ENTRY(__image_dtb) -+ .fill 0x4000 -+END(__image_dtb) -+ - .section .init.text, "ax",@progbits - - ;---------------------------------------------------------------- ---- a/arch/arc/kernel/setup.c -+++ b/arch/arc/kernel/setup.c -@@ -366,6 +366,8 @@ static inline int is_kernel(unsigned lon - return 0; - } - -+extern struct boot_param_header __image_dtb; -+ - void __init setup_arch(char **cmdline_p) - { - #ifdef CONFIG_ARC_UBOOT_SUPPORT -@@ -379,7 +381,7 @@ void __init setup_arch(char **cmdline_p) - #endif - { - /* No, so try the embedded one */ -- machine_desc = setup_machine_fdt(__dtb_start); -+ machine_desc = setup_machine_fdt(&__image_dtb); - if (!machine_desc) - panic("Embedded DT invalid\n"); - ---- a/arch/arc/kernel/vmlinux.lds.S -+++ b/arch/arc/kernel/vmlinux.lds.S -@@ -30,6 +30,19 @@ SECTIONS - - . = CONFIG_LINUX_LINK_BASE; - -+ /* -+ * In OpenWRT we want to patch built binary embedding .dtb of choice. -+ * This is implemented with "patch-dtb" utility which searches for -+ * "OWRTDTB:" string in first 16k of image and if it is found -+ * copies .dtb right after mentioned string. -+ * -+ * Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it. -+ */ -+ .owrt : { -+ *(.owrt) -+ . = ALIGN(PAGE_SIZE); -+ } -+ - _int_vec_base_lds = .; - .vector : { - *(.vector) diff --git a/target/linux/generic/pending-4.4/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-4.4/333-arc-enable-unaligned-access-in-kernel-mode.patch deleted file mode 100644 index 082f525f1b..0000000000 --- a/target/linux/generic/pending-4.4/333-arc-enable-unaligned-access-in-kernel-mode.patch +++ /dev/null @@ -1,26 +0,0 @@ -From af737b55fc7c61f17da9ae89fba536e0a9338e98 Mon Sep 17 00:00:00 2001 -From: Alexey Brodkin <abrodkin@synopsys.com> -Date: Mon, 14 Mar 2016 17:26:34 +0300 -Subject: [PATCH] arc: enable unaligned access in kernel mode - -This enables misaligned access handling even in kernel mode. -Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses -here and there and to cope with that without fixing stuff in the drivers -we're just gracefully handling it on ARC. - -Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> ---- - arch/arc/kernel/unaligned.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arc/kernel/unaligned.c -+++ b/arch/arc/kernel/unaligned.c -@@ -206,7 +206,7 @@ int misaligned_fixup(unsigned long addre - char buf[TASK_COMM_LEN]; - - /* handle user mode only and only if enabled by sysadmin */ -- if (!user_mode(regs) || !unaligned_enabled) -+ if (!unaligned_enabled) - return 1; - - if (no_unaligned_warning) { diff --git a/target/linux/generic/pending-4.4/400-mtd-add-rootfs-split-support.patch b/target/linux/generic/pending-4.4/400-mtd-add-rootfs-split-support.patch deleted file mode 100644 index 7925caf97c..0000000000 --- a/target/linux/generic/pending-4.4/400-mtd-add-rootfs-split-support.patch +++ /dev/null @@ -1,113 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -12,6 +12,23 @@ menuconfig MTD - - if MTD - -+menu "OpenWrt specific MTD options" -+ -+config MTD_ROOTFS_ROOT_DEV -+ bool "Automatically set 'rootfs' partition to be root filesystem" -+ default y -+ -+config MTD_SPLIT_FIRMWARE -+ bool "Automatically split firmware partition for kernel+rootfs" -+ default y -+ -+config MTD_SPLIT_FIRMWARE_NAME -+ string "Firmware partition name" -+ depends on MTD_SPLIT_FIRMWARE -+ default "firmware" -+ -+endmenu -+ - config MTD_TESTS - tristate "MTD tests support (DANGEROUS)" - depends on m ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -29,11 +29,13 @@ - #include <linux/kmod.h> - #include <linux/mtd/mtd.h> - #include <linux/mtd/partitions.h> -+#include <linux/magic.h> - #include <linux/of.h> - #include <linux/err.h> - #include <linux/kconfig.h> - - #include "mtdcore.h" -+#include "mtdsplit/mtdsplit.h" - - /* Our partition linked list */ - static LIST_HEAD(mtd_partitions); -@@ -47,6 +49,8 @@ struct mtd_part { - struct list_head list; - }; - -+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part); -+ - /* - * Given a pointer to the MTD object in the mtd_part structure, we can retrieve - * the pointer to that structure with this macro. -@@ -612,6 +616,7 @@ int mtd_add_partition(struct mtd_info *m - mutex_unlock(&mtd_partitions_mutex); - - add_mtd_device(&new->mtd); -+ mtd_partition_split(master, new); - - mtd_add_partition_attrs(new); - -@@ -644,6 +649,35 @@ int mtd_del_partition(struct mtd_info *m - } - EXPORT_SYMBOL_GPL(mtd_del_partition); - -+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME -+#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME -+#else -+#define SPLIT_FIRMWARE_NAME "unused" -+#endif -+ -+static void split_firmware(struct mtd_info *master, struct mtd_part *part) -+{ -+} -+ -+void __weak arch_split_mtd_part(struct mtd_info *master, const char *name, -+ int offset, int size) -+{ -+} -+ -+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part) -+{ -+ static int rootfs_found = 0; -+ -+ if (rootfs_found) -+ return; -+ -+ if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) && -+ config_enabled(CONFIG_MTD_SPLIT_FIRMWARE)) -+ split_firmware(master, part); -+ -+ arch_split_mtd_part(master, part->mtd.name, part->offset, -+ part->mtd.size); -+} - /* - * This function, given a master MTD object and a partition table, creates - * and registers slave MTD objects which are bound to the master according to -@@ -675,6 +709,7 @@ int add_mtd_partitions(struct mtd_info * - mutex_unlock(&mtd_partitions_mutex); - - add_mtd_device(&slave->mtd); -+ mtd_partition_split(master, slave); - mtd_add_partition_attrs(slave); - - cur_offset = slave->offset + slave->mtd.size; ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -84,5 +84,7 @@ int mtd_add_partition(struct mtd_info *m - long long offset, long long length); - int mtd_del_partition(struct mtd_info *master, int partno); - uint64_t mtd_get_device_size(const struct mtd_info *mtd); -+extern void __weak arch_split_mtd_part(struct mtd_info *master, -+ const char *name, int offset, int size); - - #endif diff --git a/target/linux/generic/pending-4.4/401-mtd-add-support-for-different-partition-parser-types.patch b/target/linux/generic/pending-4.4/401-mtd-add-support-for-different-partition-parser-types.patch deleted file mode 100644 index 7695d56de9..0000000000 --- a/target/linux/generic/pending-4.4/401-mtd-add-support-for-different-partition-parser-types.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 02cff0ccaa6d364f5c1eeea83f47ac80ccc967d4 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 3 Sep 2013 18:11:50 +0200 -Subject: [PATCH] mtd: add support for different partition parser types - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - drivers/mtd/mtdpart.c | 56 ++++++++++++++++++++++++++++++++++++++++ - include/linux/mtd/partitions.h | 11 ++++++++ - 2 files changed, 67 insertions(+) - ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -740,6 +740,30 @@ static struct mtd_part_parser *get_parti - - #define put_partition_parser(p) do { module_put((p)->owner); } while (0) - -+static struct mtd_part_parser * -+get_partition_parser_by_type(enum mtd_parser_type type, -+ struct mtd_part_parser *start) -+{ -+ struct mtd_part_parser *p, *ret = NULL; -+ -+ spin_lock(&part_parser_lock); -+ -+ p = list_prepare_entry(start, &part_parsers, list); -+ if (start) -+ put_partition_parser(start); -+ -+ list_for_each_entry_continue(p, &part_parsers, list) { -+ if (p->type == type && try_module_get(p->owner)) { -+ ret = p; -+ break; -+ } -+ } -+ -+ spin_unlock(&part_parser_lock); -+ -+ return ret; -+} -+ - void register_mtd_parser(struct mtd_part_parser *p) - { - spin_lock(&part_parser_lock); -@@ -868,6 +892,38 @@ int parse_mtd_partitions(struct mtd_info - return err; - } - -+int parse_mtd_partitions_by_type(struct mtd_info *master, -+ enum mtd_parser_type type, -+ struct mtd_partition **pparts, -+ struct mtd_part_parser_data *data) -+{ -+ struct mtd_part_parser *prev = NULL; -+ int ret = 0; -+ -+ while (1) { -+ struct mtd_part_parser *parser; -+ -+ parser = get_partition_parser_by_type(type, prev); -+ if (!parser) -+ break; -+ -+ ret = (*parser->parse_fn)(master, pparts, data); -+ -+ if (ret > 0) { -+ put_partition_parser(parser); -+ printk(KERN_NOTICE -+ "%d %s partitions found on MTD device %s\n", -+ ret, parser->name, master->name); -+ break; -+ } -+ -+ prev = parser; -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type); -+ - int mtd_is_partition(const struct mtd_info *mtd) - { - struct mtd_part *part; ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -68,12 +68,17 @@ struct mtd_part_parser_data { - * Functions dealing with the various ways of partitioning the space - */ - -+enum mtd_parser_type { -+ MTD_PARSER_TYPE_DEVICE = 0, -+}; -+ - struct mtd_part_parser { - struct list_head list; - struct module *owner; - const char *name; - int (*parse_fn)(struct mtd_info *, struct mtd_partition **, - struct mtd_part_parser_data *); -+ enum mtd_parser_type type; - }; - - extern void register_mtd_parser(struct mtd_part_parser *parser); -@@ -87,4 +92,9 @@ uint64_t mtd_get_device_size(const struc - extern void __weak arch_split_mtd_part(struct mtd_info *master, - const char *name, int offset, int size); - -+int parse_mtd_partitions_by_type(struct mtd_info *master, -+ enum mtd_parser_type type, -+ struct mtd_partition **pparts, -+ struct mtd_part_parser_data *data); -+ - #endif diff --git a/target/linux/generic/pending-4.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch b/target/linux/generic/pending-4.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch deleted file mode 100644 index 2ea2056ba2..0000000000 --- a/target/linux/generic/pending-4.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -649,6 +649,36 @@ int mtd_del_partition(struct mtd_info *m - } - EXPORT_SYMBOL_GPL(mtd_del_partition); - -+static int -+run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type) -+{ -+ struct mtd_partition *parts; -+ int nr_parts; -+ int i; -+ -+ nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, &parts, -+ NULL); -+ if (nr_parts <= 0) -+ return nr_parts; -+ -+ if (WARN_ON(!parts)) -+ return 0; -+ -+ for (i = 0; i < nr_parts; i++) { -+ /* adjust partition offsets */ -+ parts[i].offset += slave->offset; -+ -+ mtd_add_partition(slave->master, -+ parts[i].name, -+ parts[i].offset, -+ parts[i].size); -+ } -+ -+ kfree(parts); -+ -+ return nr_parts; -+} -+ - #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME - #define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME - #else -@@ -657,6 +687,7 @@ EXPORT_SYMBOL_GPL(mtd_del_partition); - - static void split_firmware(struct mtd_info *master, struct mtd_part *part) - { -+ run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE); - } - - void __weak arch_split_mtd_part(struct mtd_info *master, const char *name, -@@ -671,6 +702,12 @@ static void mtd_partition_split(struct m - if (rootfs_found) - return; - -+ if (!strcmp(part->mtd.name, "rootfs")) { -+ run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS); -+ -+ rootfs_found = 1; -+ } -+ - if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) && - config_enabled(CONFIG_MTD_SPLIT_FIRMWARE)) - split_firmware(master, part); ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -70,6 +70,8 @@ struct mtd_part_parser_data { - - enum mtd_parser_type { - MTD_PARSER_TYPE_DEVICE = 0, -+ MTD_PARSER_TYPE_ROOTFS, -+ MTD_PARSER_TYPE_FIRMWARE, - }; - - struct mtd_part_parser { diff --git a/target/linux/generic/pending-4.4/403-mtd-hook-mtdsplit-to-Kbuild.patch b/target/linux/generic/pending-4.4/403-mtd-hook-mtdsplit-to-Kbuild.patch deleted file mode 100644 index 0cf1c38555..0000000000 --- a/target/linux/generic/pending-4.4/403-mtd-hook-mtdsplit-to-Kbuild.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -27,6 +27,8 @@ config MTD_SPLIT_FIRMWARE_NAME - depends on MTD_SPLIT_FIRMWARE - default "firmware" - -+source "drivers/mtd/mtdsplit/Kconfig" -+ - endmenu - - config MTD_TESTS ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -6,6 +6,8 @@ - obj-$(CONFIG_MTD) += mtd.o - mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o - -+obj-$(CONFIG_MTD_SPLIT) += mtdsplit/ -+ - obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o diff --git a/target/linux/generic/pending-4.4/404-mtd-add-more-helper-functions.patch b/target/linux/generic/pending-4.4/404-mtd-add-more-helper-functions.patch deleted file mode 100644 index 3773e1f195..0000000000 --- a/target/linux/generic/pending-4.4/404-mtd-add-more-helper-functions.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -454,14 +454,12 @@ static struct mtd_part *allocate_partiti - if (slave->offset == MTDPART_OFS_APPEND) - slave->offset = cur_offset; - if (slave->offset == MTDPART_OFS_NXTBLK) { -- slave->offset = cur_offset; -- if (mtd_mod_by_eb(cur_offset, master) != 0) { -- /* Round up to next erasesize */ -- slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize; -+ /* Round up to next erasesize */ -+ slave->offset = mtd_roundup_to_eb(cur_offset, master); -+ if (slave->offset != cur_offset) - printk(KERN_NOTICE "Moving partition %d: " - "0x%012llx -> 0x%012llx\n", partno, - (unsigned long long)cur_offset, (unsigned long long)slave->offset); -- } - } - if (slave->offset == MTDPART_OFS_RETAIN) { - slave->offset = cur_offset; -@@ -679,6 +677,17 @@ run_parsers_by_type(struct mtd_part *sla - return nr_parts; - } - -+static inline unsigned long -+mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len) -+{ -+ unsigned long mask = mtd->erasesize - 1; -+ -+ len += offset & mask; -+ len = (len + mask) & ~mask; -+ len -= offset & mask; -+ return len; -+} -+ - #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME - #define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME - #else -@@ -978,6 +987,24 @@ int mtd_is_partition(const struct mtd_in - } - EXPORT_SYMBOL_GPL(mtd_is_partition); - -+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd) -+{ -+ if (!mtd_is_partition(mtd)) -+ return (struct mtd_info *)mtd; -+ -+ return PART(mtd)->master; -+} -+EXPORT_SYMBOL_GPL(mtdpart_get_master); -+ -+uint64_t mtdpart_get_offset(const struct mtd_info *mtd) -+{ -+ if (!mtd_is_partition(mtd)) -+ return 0; -+ -+ return PART(mtd)->offset; -+} -+EXPORT_SYMBOL_GPL(mtdpart_get_offset); -+ - /* Returns the size of the entire flash chip */ - uint64_t mtd_get_device_size(const struct mtd_info *mtd) - { ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -90,6 +90,8 @@ int mtd_is_partition(const struct mtd_in - int mtd_add_partition(struct mtd_info *master, const char *name, - long long offset, long long length); - int mtd_del_partition(struct mtd_info *master, int partno); -+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd); -+uint64_t mtdpart_get_offset(const struct mtd_info *mtd); - uint64_t mtd_get_device_size(const struct mtd_info *mtd); - extern void __weak arch_split_mtd_part(struct mtd_info *master, - const char *name, int offset, int size); ---- a/include/linux/mtd/mtd.h -+++ b/include/linux/mtd/mtd.h -@@ -334,6 +334,24 @@ static inline uint32_t mtd_mod_by_eb(uin - return do_div(sz, mtd->erasesize); - } - -+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd) -+{ -+ if (mtd_mod_by_eb(sz, mtd) == 0) -+ return sz; -+ -+ /* Round up to next erase block */ -+ return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize; -+} -+ -+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd) -+{ -+ if (mtd_mod_by_eb(sz, mtd) == 0) -+ return sz; -+ -+ /* Round down to the start of the current erase block */ -+ return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize; -+} -+ - static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd) - { - if (mtd->writesize_shift) diff --git a/target/linux/generic/pending-4.4/410-mtd-move-forward-declaration-of-struct-mtd_info.patch b/target/linux/generic/pending-4.4/410-mtd-move-forward-declaration-of-struct-mtd_info.patch deleted file mode 100644 index 78ebbf88ca..0000000000 --- a/target/linux/generic/pending-4.4/410-mtd-move-forward-declaration-of-struct-mtd_info.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -35,6 +35,7 @@ - * Note: writeable partitions require their size and offset be - * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK). - */ -+struct mtd_info; - - struct mtd_partition { - const char *name; /* identifier string */ -@@ -50,7 +51,6 @@ struct mtd_partition { - #define MTDPART_SIZ_FULL (0) - - --struct mtd_info; - struct device_node; - - /** diff --git a/target/linux/generic/pending-4.4/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/pending-4.4/411-mtd-partial_eraseblock_write.patch deleted file mode 100644 index 7ab8eb3442..0000000000 --- a/target/linux/generic/pending-4.4/411-mtd-partial_eraseblock_write.patch +++ /dev/null @@ -1,142 +0,0 @@ ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -37,6 +37,8 @@ - #include "mtdcore.h" - #include "mtdsplit/mtdsplit.h" - -+#define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */ -+ - /* Our partition linked list */ - static LIST_HEAD(mtd_partitions); - static DEFINE_MUTEX(mtd_partitions_mutex); -@@ -236,13 +238,61 @@ static int part_erase(struct mtd_info *m - struct mtd_part *part = PART(mtd); - int ret; - -+ -+ instr->partial_start = false; -+ if (mtd->flags & MTD_ERASE_PARTIAL) { -+ size_t readlen = 0; -+ u64 mtd_ofs; -+ -+ instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC); -+ if (!instr->erase_buf) -+ return -ENOMEM; -+ -+ mtd_ofs = part->offset + instr->addr; -+ instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize); -+ -+ if (instr->erase_buf_ofs > 0) { -+ instr->addr -= instr->erase_buf_ofs; -+ ret = mtd_read(part->master, -+ instr->addr + part->offset, -+ part->master->erasesize, -+ &readlen, instr->erase_buf); -+ -+ instr->len += instr->erase_buf_ofs; -+ instr->partial_start = true; -+ } else { -+ mtd_ofs = part->offset + part->mtd.size; -+ instr->erase_buf_ofs = part->master->erasesize - -+ do_div(mtd_ofs, part->master->erasesize); -+ -+ if (instr->erase_buf_ofs > 0) { -+ instr->len += instr->erase_buf_ofs; -+ ret = mtd_read(part->master, -+ part->offset + instr->addr + -+ instr->len - part->master->erasesize, -+ part->master->erasesize, &readlen, -+ instr->erase_buf); -+ } else { -+ ret = 0; -+ } -+ } -+ if (ret < 0) { -+ kfree(instr->erase_buf); -+ return ret; -+ } -+ -+ } -+ - instr->addr += part->offset; - ret = part->master->_erase(part->master, instr); - if (ret) { - if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) - instr->fail_addr -= part->offset; - instr->addr -= part->offset; -+ if (mtd->flags & MTD_ERASE_PARTIAL) -+ kfree(instr->erase_buf); - } -+ - return ret; - } - -@@ -250,7 +300,25 @@ void mtd_erase_callback(struct erase_inf - { - if (instr->mtd->_erase == part_erase) { - struct mtd_part *part = PART(instr->mtd); -+ size_t wrlen = 0; - -+ if (instr->mtd->flags & MTD_ERASE_PARTIAL) { -+ if (instr->partial_start) { -+ part->master->_write(part->master, -+ instr->addr, instr->erase_buf_ofs, -+ &wrlen, instr->erase_buf); -+ instr->addr += instr->erase_buf_ofs; -+ } else { -+ instr->len -= instr->erase_buf_ofs; -+ part->master->_write(part->master, -+ instr->addr + instr->len, -+ instr->erase_buf_ofs, &wrlen, -+ instr->erase_buf + -+ part->master->erasesize - -+ instr->erase_buf_ofs); -+ } -+ kfree(instr->erase_buf); -+ } - if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) - instr->fail_addr -= part->offset; - instr->addr -= part->offset; -@@ -523,17 +591,20 @@ static struct mtd_part *allocate_partiti - if ((slave->mtd.flags & MTD_WRITEABLE) && - mtd_mod_by_eb(slave->offset, &slave->mtd)) { - /* Doesn't start on a boundary of major erase size */ -- /* FIXME: Let it be writable if it is on a boundary of -- * _minor_ erase size though */ -- slave->mtd.flags &= ~MTD_WRITEABLE; -- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n", -- part->name); -+ slave->mtd.flags |= MTD_ERASE_PARTIAL; -+ if (((u32) slave->mtd.size) > master->erasesize) -+ slave->mtd.flags &= ~MTD_WRITEABLE; -+ else -+ slave->mtd.erasesize = slave->mtd.size; - } - if ((slave->mtd.flags & MTD_WRITEABLE) && -- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) { -- slave->mtd.flags &= ~MTD_WRITEABLE; -- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n", -- part->name); -+ mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) { -+ slave->mtd.flags |= MTD_ERASE_PARTIAL; -+ -+ if ((u32) slave->mtd.size > master->erasesize) -+ slave->mtd.flags &= ~MTD_WRITEABLE; -+ else -+ slave->mtd.erasesize = slave->mtd.size; - } - - slave->mtd.ecclayout = master->ecclayout; ---- a/include/linux/mtd/mtd.h -+++ b/include/linux/mtd/mtd.h -@@ -55,6 +55,10 @@ struct erase_info { - u_long priv; - u_char state; - struct erase_info *next; -+ -+ u8 *erase_buf; -+ u32 erase_buf_ofs; -+ bool partial_start; - }; - - struct mtd_erase_region_info { diff --git a/target/linux/generic/pending-4.4/412-mtd-partial_eraseblock_unlock.patch b/target/linux/generic/pending-4.4/412-mtd-partial_eraseblock_unlock.patch deleted file mode 100644 index 990c2aba6e..0000000000 --- a/target/linux/generic/pending-4.4/412-mtd-partial_eraseblock_unlock.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -337,7 +337,14 @@ static int part_lock(struct mtd_info *mt - static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) - { - struct mtd_part *part = PART(mtd); -- return part->master->_unlock(part->master, ofs + part->offset, len); -+ -+ ofs += part->offset; -+ if (mtd->flags & MTD_ERASE_PARTIAL) { -+ /* round up len to next erasesize and round down offset to prev block */ -+ len = (mtd_div_by_eb(len, part->master) + 1) * part->master->erasesize; -+ ofs &= ~(part->master->erasesize - 1); -+ } -+ return part->master->_unlock(part->master, ofs, len); - } - - static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) diff --git a/target/linux/generic/pending-4.4/420-mtd-redboot_space.patch b/target/linux/generic/pending-4.4/420-mtd-redboot_space.patch deleted file mode 100644 index f74affcef7..0000000000 --- a/target/linux/generic/pending-4.4/420-mtd-redboot_space.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru - #endif - names += strlen(names)+1; - --#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) { -- i++; -- parts[i].offset = parts[i-1].size + parts[i-1].offset; -- parts[i].size = fl->next->img->flash_base - parts[i].offset; -- parts[i].name = nullname; -- } -+ if (!strcmp(parts[i].name, "rootfs")) { -+ parts[i].size = fl->next->img->flash_base; -+ parts[i].size &= ~(master->erasesize - 1); -+ parts[i].size -= parts[i].offset; -+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED -+ nrparts--; -+ } else { -+ i++; -+ parts[i].offset = parts[i-1].size + parts[i-1].offset; -+ parts[i].size = fl->next->img->flash_base - parts[i].offset; -+ parts[i].name = nullname; - #endif -+ } -+ } - tmp_fl = fl; - fl = fl->next; - kfree(tmp_fl); diff --git a/target/linux/generic/pending-4.4/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-4.4/430-mtd-add-myloader-partition-parser.patch deleted file mode 100644 index a022564e9e..0000000000 --- a/target/linux/generic/pending-4.4/430-mtd-add-myloader-partition-parser.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -174,6 +174,22 @@ config MTD_BCM47XX_PARTS - This provides partitions parser for devices based on BCM47xx - boards. - -+config MTD_MYLOADER_PARTS -+ tristate "MyLoader partition parsing" -+ depends on ADM5120 || ATH25 || ATH79 -+ ---help--- -+ MyLoader is a bootloader which allows the user to define partitions -+ in flash devices, by putting a table in the second erase block -+ on the device, similar to a partition table. This table gives the -+ offsets and lengths of the user defined partitions. -+ -+ If you need code which can detect and parse these tables, and -+ register MTD 'partitions' corresponding to each image detected, -+ enable this option. -+ -+ You will still need the parsing functions to be called by the driver -+ for your particular device. It won't happen automatically. -+ - comment "User Modules And Translation Layers" - - # ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o -+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/target/linux/generic/pending-4.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-4.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch deleted file mode 100644 index 379e551b7f..0000000000 --- a/target/linux/generic/pending-4.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch +++ /dev/null @@ -1,91 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sat, 2 Jan 2016 01:04:52 +0100 -Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating - offsets -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/bcm47xxpart.c | 50 +++++++++++++++++++++++++++++++++++++---------- - 1 file changed, 40 insertions(+), 10 deletions(-) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -62,6 +62,34 @@ static void bcm47xxpart_add_part(struct - part->mask_flags = mask_flags; - } - -+/* -+ * Calculate real end offset (address) for a given amount of data. It checks -+ * all blocks skipping bad ones. -+ */ -+static size_t bcm47xxpart_real_offset(struct mtd_info *master, size_t offset, -+ size_t bytes) -+{ -+ size_t real_offset = offset; -+ -+ if (mtd_block_isbad(master, real_offset)) -+ pr_warn("Base offset shouldn't be at bad block"); -+ -+ while (bytes >= master->erasesize) { -+ bytes -= master->erasesize; -+ real_offset += master->erasesize; -+ while (mtd_block_isbad(master, real_offset)) { -+ real_offset += master->erasesize; -+ -+ if (real_offset >= master->size) -+ return real_offset - master->erasesize; -+ } -+ } -+ -+ real_offset += bytes; -+ -+ return real_offset; -+} -+ - static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master, - size_t offset) - { -@@ -91,6 +119,7 @@ static int bcm47xxpart_parse_trx(struct - { - struct trx_header header; - size_t bytes_read; -+ size_t offset; - int curr_part = 0; - int i, err; - -@@ -110,21 +139,25 @@ static int bcm47xxpart_parse_trx(struct - - /* We have LZMA loader if offset[2] points to sth */ - if (header.offset[2]) { -- bcm47xxpart_add_part(&parts[curr_part++], "loader", -- trx->offset + header.offset[i], 0); -+ offset = bcm47xxpart_real_offset(master, trx->offset, -+ header.offset[i]); -+ bcm47xxpart_add_part(&parts[curr_part++], "loader", offset, 0); - i++; - } - - if (header.offset[i]) { -- bcm47xxpart_add_part(&parts[curr_part++], "linux", -- trx->offset + header.offset[i], 0); -+ offset = bcm47xxpart_real_offset(master, trx->offset, -+ header.offset[i]); -+ bcm47xxpart_add_part(&parts[curr_part++], "linux", offset, 0); - i++; - } - - if (header.offset[i]) { -- size_t offset = trx->offset + header.offset[i]; -- const char *name = bcm47xxpart_trx_data_part_name(master, -- offset); -+ const char *name; -+ -+ offset = bcm47xxpart_real_offset(master, trx->offset, -+ header.offset[i]); -+ name = bcm47xxpart_trx_data_part_name(master, offset); - - bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0); - i++; diff --git a/target/linux/generic/pending-4.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-4.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch deleted file mode 100644 index a19e943efe..0000000000 --- a/target/linux/generic/pending-4.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch +++ /dev/null @@ -1,42 +0,0 @@ -From fd54aa583296f9adfb1f519affbc10ba521eb809 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 28 Jan 2015 22:14:41 +0100 -Subject: [PATCH] mtd: bcm47xxpart: detect T_Meter partition -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It can be found on many Netgear devices. It consists of many 0x30 blocks -starting with 4D 54. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/bcm47xxpart.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -39,6 +39,7 @@ - #define NVRAM_HEADER 0x48534C46 /* FLSH */ - #define POT_MAGIC1 0x54544f50 /* POTT */ - #define POT_MAGIC2 0x504f /* OP */ -+#define T_METER_MAGIC 0x4D540000 /* MT */ - #define ML_MAGIC1 0x39685a42 - #define ML_MAGIC2 0x26594131 - #define TRX_MAGIC 0x30524448 -@@ -297,6 +298,15 @@ static int bcm47xxpart_parse(struct mtd_ - MTD_WRITEABLE); - continue; - } -+ -+ /* T_Meter */ -+ if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC && -+ (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC && -+ (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) { -+ bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset, -+ MTD_WRITEABLE); -+ continue; -+ } - - /* TRX */ - if (buf[0x000 / 4] == TRX_MAGIC) { diff --git a/target/linux/generic/pending-4.4/440-block2mtd_init.patch b/target/linux/generic/pending-4.4/440-block2mtd_init.patch deleted file mode 100644 index f2e62b4401..0000000000 --- a/target/linux/generic/pending-4.4/440-block2mtd_init.patch +++ /dev/null @@ -1,108 +0,0 @@ ---- a/drivers/mtd/devices/block2mtd.c -+++ b/drivers/mtd/devices/block2mtd.c -@@ -26,6 +26,7 @@ - #include <linux/list.h> - #include <linux/init.h> - #include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> - #include <linux/mutex.h> - #include <linux/mount.h> - #include <linux/slab.h> -@@ -219,7 +220,7 @@ static void block2mtd_free_device(struct - - - static struct block2mtd_dev *add_device(char *devname, int erase_size, -- int timeout) -+ const char *mtdname, int timeout) - { - #ifndef MODULE - int i; -@@ -227,6 +228,7 @@ static struct block2mtd_dev *add_device( - const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL; - struct block_device *bdev = ERR_PTR(-ENODEV); - struct block2mtd_dev *dev; -+ struct mtd_partition *part; - char *name; - - if (!devname) -@@ -283,13 +285,16 @@ static struct block2mtd_dev *add_device( - - /* Setup the MTD structure */ - /* make the name contain the block device in */ -- name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname); -+ if (!mtdname) -+ mtdname = devname; -+ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL); - if (!name) - goto err_destroy_mutex; - -+ strcpy(name, mtdname); - dev->mtd.name = name; - -- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; -+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1); - dev->mtd.erasesize = erase_size; - dev->mtd.writesize = 1; - dev->mtd.writebufsize = PAGE_SIZE; -@@ -302,7 +307,11 @@ static struct block2mtd_dev *add_device( - dev->mtd.priv = dev; - dev->mtd.owner = THIS_MODULE; - -- if (mtd_device_register(&dev->mtd, NULL, 0)) { -+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL); -+ part->name = name; -+ part->offset = 0; -+ part->size = dev->mtd.size; -+ if (mtd_device_register(&dev->mtd, part, 1)) { - /* Device didn't get added, so free the entry */ - goto err_destroy_mutex; - } -@@ -310,8 +319,7 @@ static struct block2mtd_dev *add_device( - list_add(&dev->list, &blkmtd_device_list); - pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n", - dev->mtd.index, -- dev->mtd.name + strlen("block2mtd: "), -- dev->mtd.erasesize >> 10, dev->mtd.erasesize); -+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize); - return dev; - - err_destroy_mutex: -@@ -384,7 +392,7 @@ static int block2mtd_setup2(const char * - /* 80 for device, 12 for erase size, 80 for name, 8 for timeout */ - char buf[80 + 12 + 80 + 8]; - char *str = buf; -- char *token[2]; -+ char *token[3]; - char *name; - size_t erase_size = PAGE_SIZE; - unsigned long timeout = MTD_DEFAULT_TIMEOUT; -@@ -398,7 +406,7 @@ static int block2mtd_setup2(const char * - strcpy(str, val); - kill_final_newline(str); - -- for (i = 0; i < 2; i++) -+ for (i = 0; i < 3; i++) - token[i] = strsep(&str, ","); - - if (str) { -@@ -424,8 +432,10 @@ static int block2mtd_setup2(const char * - return 0; - } - } -+ if (token[2] && (strlen(token[2]) + 1 > 80)) -+ pr_err("mtd device name too long\n"); - -- add_device(name, erase_size, timeout); -+ add_device(name, erase_size, token[2], timeout); - - return 0; - } -@@ -459,7 +469,7 @@ static int block2mtd_setup(const char *v - - - module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200); --MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\""); -+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\""); - - static int __init block2mtd_init(void) - { diff --git a/target/linux/generic/pending-4.4/441-block2mtd_probe.patch b/target/linux/generic/pending-4.4/441-block2mtd_probe.patch deleted file mode 100644 index ed14537a6c..0000000000 --- a/target/linux/generic/pending-4.4/441-block2mtd_probe.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/drivers/mtd/devices/block2mtd.c -+++ b/drivers/mtd/devices/block2mtd.c -@@ -392,7 +392,7 @@ static int block2mtd_setup2(const char * - /* 80 for device, 12 for erase size, 80 for name, 8 for timeout */ - char buf[80 + 12 + 80 + 8]; - char *str = buf; -- char *token[3]; -+ char *token[4]; - char *name; - size_t erase_size = PAGE_SIZE; - unsigned long timeout = MTD_DEFAULT_TIMEOUT; -@@ -406,7 +406,7 @@ static int block2mtd_setup2(const char * - strcpy(str, val); - kill_final_newline(str); - -- for (i = 0; i < 3; i++) -+ for (i = 0; i < 4; i++) - token[i] = strsep(&str, ","); - - if (str) { -@@ -435,6 +435,9 @@ static int block2mtd_setup2(const char * - if (token[2] && (strlen(token[2]) + 1 > 80)) - pr_err("mtd device name too long\n"); - -+ if (token[3] && kstrtoul(token[3], 0, &timeout)) -+ pr_err("invalid timeout\n"); -+ - add_device(name, erase_size, token[2], timeout); - - return 0; -@@ -469,7 +472,7 @@ static int block2mtd_setup(const char *v - - - module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200); --MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\""); -+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\""); - - static int __init block2mtd_init(void) - { diff --git a/target/linux/generic/pending-4.4/450-mtd-nand-allow-to-use-platform-specific-chip-fixup.patch b/target/linux/generic/pending-4.4/450-mtd-nand-allow-to-use-platform-specific-chip-fixup.patch deleted file mode 100644 index b1072047c3..0000000000 --- a/target/linux/generic/pending-4.4/450-mtd-nand-allow-to-use-platform-specific-chip-fixup.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- - drivers/mtd/nand/plat_nand.c | 13 ++++++++++++- - include/linux/mtd/nand.h | 1 + - 2 files changed, 13 insertions(+), 1 deletion(-) - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -864,6 +864,7 @@ struct platform_nand_chip { - unsigned int options; - unsigned int bbt_options; - const char **part_probe_types; -+ int (*chip_fixup)(struct mtd_info *mtd); - }; - - /* Keep gcc happy */ ---- a/drivers/mtd/nand/plat_nand.c -+++ b/drivers/mtd/nand/plat_nand.c -@@ -87,7 +87,18 @@ static int plat_nand_probe(struct platfo - } - - /* Scan to find existence of the device */ -- if (nand_scan(&data->mtd, pdata->chip.nr_chips)) { -+ if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips, NULL)) { -+ err = -ENXIO; -+ goto out; -+ } -+ -+ if (pdata->chip.chip_fixup) { -+ err = pdata->chip.chip_fixup(&data->mtd); -+ if (err) -+ goto out; -+ } -+ -+ if (nand_scan_tail(&data->mtd)) { - err = -ENXIO; - goto out; - } diff --git a/target/linux/generic/pending-4.4/451-mtd-nand-fix-return-code-of-nand_correct_data-function.patch b/target/linux/generic/pending-4.4/451-mtd-nand-fix-return-code-of-nand_correct_data-function.patch deleted file mode 100644 index 6a2092ce20..0000000000 --- a/target/linux/generic/pending-4.4/451-mtd-nand-fix-return-code-of-nand_correct_data-function.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/mtd/nand/nand_ecc.c -+++ b/drivers/mtd/nand/nand_ecc.c -@@ -507,7 +507,7 @@ int __nand_correct_data(unsigned char *b - return 1; /* error in ECC data; no action needed */ - - pr_err("%s: uncorrectable ECC error\n", __func__); -- return -1; -+ return -EBADMSG; - } - EXPORT_SYMBOL(__nand_correct_data); - diff --git a/target/linux/generic/pending-4.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-4.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch deleted file mode 100644 index 68fbd12466..0000000000 --- a/target/linux/generic/pending-4.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -809,7 +809,7 @@ static int get_chip(struct map_info *map - return 0; - - case FL_ERASING: -- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) || -+ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) || - !(mode == FL_READY || mode == FL_POINT || - (mode == FL_WRITING && (cfip->EraseSuspend & 0x2)))) - goto sleep; diff --git a/target/linux/generic/pending-4.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-4.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch deleted file mode 100644 index c437a140f0..0000000000 --- a/target/linux/generic/pending-4.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch +++ /dev/null @@ -1,18 +0,0 @@ -From: George Kashperko <george@znau.edu.ua> - -Issue map read after Write Buffer Load command to ensure chip is ready -to receive data. -Signed-off-by: George Kashperko <george@znau.edu.ua> ---- - drivers/mtd/chips/cfi_cmdset_0002.c | 1 + - 1 file changed, 1 insertion(+) ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1830,6 +1830,7 @@ static int __xipram do_write_buffer(stru - - /* Write Buffer Load */ - map_write(map, CMD(0x25), cmd_adr); -+ (void) map_read(map, cmd_adr); - - chip->state = FL_WRITING_TO_BUFFER; - diff --git a/target/linux/generic/pending-4.4/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-4.4/465-m25p80-mx-disable-software-protection.patch deleted file mode 100644 index e81ebbb3fa..0000000000 --- a/target/linux/generic/pending-4.4/465-m25p80-mx-disable-software-protection.patch +++ /dev/null @@ -1,14 +0,0 @@ -Disable software protection bits for Macronix flashes. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1166,6 +1166,7 @@ int spi_nor_scan(struct spi_nor *nor, co - - if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || - JEDEC_MFR(info) == SNOR_MFR_INTEL || -+ JEDEC_MFR(info) == SNOR_MFR_MACRONIX || - JEDEC_MFR(info) == SNOR_MFR_SST || - info->flags & SPI_NOR_HAS_LOCK) { - write_enable(nor); diff --git a/target/linux/generic/pending-4.4/475-mtd-spi-nor-add-macronix-mx25u25635f.patch b/target/linux/generic/pending-4.4/475-mtd-spi-nor-add-macronix-mx25u25635f.patch deleted file mode 100644 index d868a7da25..0000000000 --- a/target/linux/generic/pending-4.4/475-mtd-spi-nor-add-macronix-mx25u25635f.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -725,6 +725,7 @@ static const struct flash_info spi_nor_i - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, -+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, 0) }, - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) }, - { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, diff --git a/target/linux/generic/pending-4.4/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-4.4/476-mtd-spi-nor-add-eon-en25q128.patch deleted file mode 100644 index ab805b71d0..0000000000 --- a/target/linux/generic/pending-4.4/476-mtd-spi-nor-add-eon-en25q128.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -683,6 +683,7 @@ static const struct flash_info spi_nor_i - { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, - { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, - { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, -+ { "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) }, - { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) }, - { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, - { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, diff --git a/target/linux/generic/pending-4.4/477-mtd-add-spi-nor-add-mx25u3235f.patch b/target/linux/generic/pending-4.4/477-mtd-add-spi-nor-add-mx25u3235f.patch deleted file mode 100644 index c2a28a099d..0000000000 --- a/target/linux/generic/pending-4.4/477-mtd-add-spi-nor-add-mx25u3235f.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -722,6 +722,7 @@ static const struct flash_info spi_nor_i - { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) }, - { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, - { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) }, -+ { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, diff --git a/target/linux/generic/pending-4.4/478-mtd-spi-nor-add-eon-en25qh32.patch b/target/linux/generic/pending-4.4/478-mtd-spi-nor-add-eon-en25qh32.patch deleted file mode 100644 index 9e9e091a2e..0000000000 --- a/target/linux/generic/pending-4.4/478-mtd-spi-nor-add-eon-en25qh32.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1007,6 +1007,7 @@ - { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, - { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, - { "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) }, -+ { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) }, - { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) }, - { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, - { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, diff --git a/target/linux/generic/pending-4.4/479-enable_mtd_has_lock_for_f25l32pa.patch b/target/linux/generic/pending-4.4/479-enable_mtd_has_lock_for_f25l32pa.patch deleted file mode 100644 index ec67056c65..0000000000 --- a/target/linux/generic/pending-4.4/479-enable_mtd_has_lock_for_f25l32pa.patch +++ /dev/null @@ -1,22 +0,0 @@ -mtd: spi-nor: Add lock/unlock support for f25l32pa - -This chip has write protection enabled on power-up, -so this flag is necessary to support write operations. - -Signed-off-by: Victor Shyba <victor1984@riseup.net> -Acked-by: Marek Vasut <marek.vasut@gmail.com> ---- - drivers/mtd/spi-nor/spi-nor.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -689,7 +689,7 @@ static const struct flash_info spi_nor_i - { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, - - /* ESMT */ -- { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, -+ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) }, - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K) }, - { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K) }, - diff --git a/target/linux/generic/pending-4.4/480-mtd-set-rootfs-to-be-root-dev.patch b/target/linux/generic/pending-4.4/480-mtd-set-rootfs-to-be-root-dev.patch deleted file mode 100644 index d20bd8d4ec..0000000000 --- a/target/linux/generic/pending-4.4/480-mtd-set-rootfs-to-be-root-dev.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/mtd/mtdcore.c -+++ b/drivers/mtd/mtdcore.c -@@ -39,6 +39,7 @@ - #include <linux/slab.h> - #include <linux/reboot.h> - #include <linux/kconfig.h> -+#include <linux/root_dev.h> - - #include <linux/mtd/mtd.h> - #include <linux/mtd/partitions.h> -@@ -464,6 +465,15 @@ int add_mtd_device(struct mtd_info *mtd) - of this try_ nonsense, and no bitching about it - either. :) */ - __module_get(THIS_MODULE); -+ -+ if (!strcmp(mtd->name, "rootfs") && -+ config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV) && -+ ROOT_DEV == 0) { -+ pr_notice("mtd: device %d (%s) set to be root filesystem\n", -+ mtd->index, mtd->name); -+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index); -+ } -+ - return 0; - - fail_added: diff --git a/target/linux/generic/pending-4.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-4.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch deleted file mode 100644 index b15066f757..0000000000 --- a/target/linux/generic/pending-4.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 8a52e4100d7c3a4a1dfddfa02b8864a9b0068c13 Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Sat, 17 May 2014 03:36:18 +0200 -Subject: [PATCH 1/5] ubi: auto-attach mtd device named "ubi" or "data" on boot -To: openwrt-devel@lists.openwrt.org - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> ---- - drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 36 insertions(+) - ---- a/drivers/mtd/ubi/build.c -+++ b/drivers/mtd/ubi/build.c -@@ -1203,6 +1203,49 @@ static struct mtd_info * __init open_mtd - return mtd; - } - -+/* -+ * This function tries attaching mtd partitions named either "ubi" or "data" -+ * during boot. -+ */ -+static void __init ubi_auto_attach(void) -+{ -+ int err; -+ struct mtd_info *mtd; -+ -+ /* try attaching mtd device named "ubi" or "data" */ -+ mtd = open_mtd_device("ubi"); -+ if (IS_ERR(mtd)) -+ mtd = open_mtd_device("data"); -+ -+ if (!IS_ERR(mtd)) { -+ size_t len; -+ char magic[4]; -+ -+ /* check for a valid ubi magic */ -+ err = mtd_read(mtd, 0, 4, &len, (void *) magic); -+ if (!err && len == 4 && strncmp(magic, "UBI#", 4)) { -+ pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index); -+ put_mtd_device(mtd); -+ return; -+ } -+ -+ /* auto-add only media types where UBI makes sense */ -+ if (mtd->type == MTD_NANDFLASH || -+ mtd->type == MTD_NORFLASH || -+ mtd->type == MTD_DATAFLASH || -+ mtd->type == MTD_MLCNANDFLASH) { -+ mutex_lock(&ubi_devices_mutex); -+ pr_notice("UBI: auto-attach mtd%d\n", mtd->index); -+ err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0); -+ mutex_unlock(&ubi_devices_mutex); -+ if (err < 0) { -+ pr_err("UBI error: cannot attach mtd%d\n", mtd->index); -+ put_mtd_device(mtd); -+ } -+ } -+ } -+} -+ - static int __init ubi_init(void) - { - int err, i, k; -@@ -1286,6 +1329,12 @@ static int __init ubi_init(void) - } - } - -+ /* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd -+ * parameter was given */ -+ if (config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV) && -+ !ubi_is_module() && !mtd_devs) -+ ubi_auto_attach(); -+ - err = ubiblock_init(); - if (err) { - pr_err("UBI error: block: cannot initialize, error %d", err); diff --git a/target/linux/generic/pending-4.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-4.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch deleted file mode 100644 index 462f7f42cb..0000000000 --- a/target/linux/generic/pending-4.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 0f3966579815f889bb2fcb4846152c35f65e79c4 Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Thu, 15 May 2014 21:06:33 +0200 -Subject: [PATCH 2/5] ubi: auto-create ubiblock device for rootfs -To: openwrt-devel@lists.openwrt.org - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> ---- - drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 42 insertions(+) - ---- a/drivers/mtd/ubi/block.c -+++ b/drivers/mtd/ubi/block.c -@@ -636,6 +636,44 @@ static void __init ubiblock_create_from_ - } - } - -+#define UBIFS_NODE_MAGIC 0x06101831 -+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc) -+{ -+ int ret; -+ uint32_t magic_of, magic; -+ ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4); -+ if (ret) -+ return 0; -+ magic = le32_to_cpu(magic_of); -+ return magic == UBIFS_NODE_MAGIC; -+} -+ -+static void __init ubiblock_create_auto_rootfs(void) -+{ -+ int ubi_num, ret, is_ubifs; -+ struct ubi_volume_desc *desc; -+ struct ubi_volume_info vi; -+ -+ for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) { -+ desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY); -+ if (IS_ERR(desc)) -+ continue; -+ -+ ubi_get_volume_info(desc, &vi); -+ is_ubifs = ubi_vol_is_ubifs(desc); -+ ubi_close_volume(desc); -+ if (is_ubifs) -+ break; -+ -+ ret = ubiblock_create(&vi); -+ if (ret) -+ pr_err("UBI error: block: can't add '%s' volume, err=%d\n", -+ vi.name, ret); -+ /* always break if we get here */ -+ break; -+ } -+} -+ - static void ubiblock_remove_all(void) - { - struct ubiblock *next; -@@ -668,6 +706,10 @@ int __init ubiblock_init(void) - */ - ubiblock_create_from_param(); - -+ /* auto-attach "rootfs" volume if existing and non-ubifs */ -+ if (config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV)) -+ ubiblock_create_auto_rootfs(); -+ - /* - * Block devices are only created upon user requests, so we ignore - * existing volumes. diff --git a/target/linux/generic/pending-4.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-4.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch deleted file mode 100644 index ab8b8bb0a2..0000000000 --- a/target/linux/generic/pending-4.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch +++ /dev/null @@ -1,54 +0,0 @@ -From eea9e1785e4c05c2a3444506aabafa0ae958538f Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Sat, 17 May 2014 03:35:02 +0200 -Subject: [PATCH 4/5] try auto-mounting ubi0:rootfs in init/do_mounts.c -To: openwrt-devel@lists.openwrt.org - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> ---- - init/do_mounts.c | 26 +++++++++++++++++++++++++- - 1 file changed, 25 insertions(+), 1 deletion(-) - ---- a/init/do_mounts.c -+++ b/init/do_mounts.c -@@ -438,7 +438,28 @@ retry: - out: - put_page(page); - } -- -+ -+static int __init mount_ubi_rootfs(void) -+{ -+ int flags = MS_SILENT; -+ int err, tried = 0; -+ -+ while (tried < 2) { -+ err = do_mount_root("ubi0:rootfs", "ubifs", flags, \ -+ root_mount_data); -+ switch (err) { -+ case -EACCES: -+ flags |= MS_RDONLY; -+ tried++; -+ break; -+ default: -+ return err; -+ } -+ } -+ -+ return -EINVAL; -+} -+ - #ifdef CONFIG_ROOT_NFS - - #define NFSROOT_TIMEOUT_MIN 5 -@@ -532,6 +553,10 @@ void __init mount_root(void) - change_floppy("root floppy"); - } - #endif -+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV -+ if (!mount_ubi_rootfs()) -+ return; -+#endif - #ifdef CONFIG_BLOCK - { - int err = create_dev("/dev/root", ROOT_DEV); diff --git a/target/linux/generic/pending-4.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-4.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch deleted file mode 100644 index 9fbfc79927..0000000000 --- a/target/linux/generic/pending-4.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch +++ /dev/null @@ -1,37 +0,0 @@ -From cd68d1b12b5ea4c01a664c064179ada42bf55d3d Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Thu, 15 May 2014 20:55:42 +0200 -Subject: [PATCH 5/5] ubi: set ROOT_DEV to ubiblock "rootfs" if unset -To: openwrt-devel@lists.openwrt.org - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> ---- - drivers/mtd/ubi/block.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/mtd/ubi/block.c -+++ b/drivers/mtd/ubi/block.c -@@ -50,6 +50,7 @@ - #include <linux/scatterlist.h> - #include <linux/idr.h> - #include <asm/div64.h> -+#include <linux/root_dev.h> - - #include "ubi-media.h" - #include "ubi.h" -@@ -447,6 +448,15 @@ int ubiblock_create(struct ubi_volume_in - add_disk(dev->gd); - dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)", - dev->ubi_num, dev->vol_id, vi->name); -+ -+ if (!strcmp(vi->name, "rootfs") && -+ config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV) && -+ ROOT_DEV == 0) { -+ pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n", -+ dev->ubi_num, dev->vol_id, vi->name); -+ ROOT_DEV = MKDEV(gd->major, gd->first_minor); -+ } -+ - mutex_unlock(&devices_mutex); - return 0; - diff --git a/target/linux/generic/pending-4.4/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-4.4/494-mtd-ubi-add-EOF-marker-support.patch deleted file mode 100644 index 749232a396..0000000000 --- a/target/linux/generic/pending-4.4/494-mtd-ubi-add-EOF-marker-support.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/mtd/ubi/attach.c -+++ b/drivers/mtd/ubi/attach.c -@@ -803,6 +803,13 @@ out_unlock: - return err; - } - -+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech) -+{ -+ return ech->padding1[0] == 'E' && -+ ech->padding1[1] == 'O' && -+ ech->padding1[2] == 'F'; -+} -+ - /** - * scan_peb - scan and process UBI headers of a PEB. - * @ubi: UBI device description object -@@ -833,9 +840,21 @@ static int scan_peb(struct ubi_device *u - return 0; - } - -- err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0); -- if (err < 0) -- return err; -+ if (!ai->eof_found) { -+ err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0); -+ if (err < 0) -+ return err; -+ -+ if (ec_hdr_has_eof(ech)) { -+ pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n", -+ pnum); -+ ai->eof_found = true; -+ } -+ } -+ -+ if (ai->eof_found) -+ err = UBI_IO_FF_BITFLIPS; -+ - switch (err) { - case 0: - break; ---- a/drivers/mtd/ubi/ubi.h -+++ b/drivers/mtd/ubi/ubi.h -@@ -741,6 +741,7 @@ struct ubi_attach_info { - int mean_ec; - uint64_t ec_sum; - int ec_count; -+ bool eof_found; - struct kmem_cache *aeb_slab_cache; - }; - diff --git a/target/linux/generic/pending-4.4/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-4.4/530-jffs2_make_lzma_available.patch deleted file mode 100644 index b75dd0f9ff..0000000000 --- a/target/linux/generic/pending-4.4/530-jffs2_make_lzma_available.patch +++ /dev/null @@ -1,5142 +0,0 @@ ---- a/fs/jffs2/Kconfig -+++ b/fs/jffs2/Kconfig -@@ -139,6 +139,15 @@ config JFFS2_LZO - This feature was added in July, 2007. Say 'N' if you need - compatibility with older bootloaders or kernels. - -+config JFFS2_LZMA -+ bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS -+ select LZMA_COMPRESS -+ select LZMA_DECOMPRESS -+ depends on JFFS2_FS -+ default n -+ help -+ JFFS2 wrapper to the LZMA C SDK -+ - config JFFS2_RTIME - bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS ---- a/fs/jffs2/Makefile -+++ b/fs/jffs2/Makefile -@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rub - jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o - jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o - jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o -+jffs2-$(CONFIG_JFFS2_LZMA) += compr_lzma.o - jffs2-$(CONFIG_JFFS2_SUMMARY) += summary.o -+ -+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma ---- a/fs/jffs2/compr.c -+++ b/fs/jffs2/compr.c -@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void) - #ifdef CONFIG_JFFS2_LZO - jffs2_lzo_init(); - #endif -+#ifdef CONFIG_JFFS2_LZMA -+ jffs2_lzma_init(); -+#endif - /* Setting default compression mode */ - #ifdef CONFIG_JFFS2_CMODE_NONE - jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; -@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void) - int jffs2_compressors_exit(void) - { - /* Unregistering compressors */ -+#ifdef CONFIG_JFFS2_LZMA -+ jffs2_lzma_exit(); -+#endif - #ifdef CONFIG_JFFS2_LZO - jffs2_lzo_exit(); - #endif ---- a/fs/jffs2/compr.h -+++ b/fs/jffs2/compr.h -@@ -29,9 +29,9 @@ - #define JFFS2_DYNRUBIN_PRIORITY 20 - #define JFFS2_LZARI_PRIORITY 30 - #define JFFS2_RTIME_PRIORITY 50 --#define JFFS2_ZLIB_PRIORITY 60 --#define JFFS2_LZO_PRIORITY 80 -- -+#define JFFS2_LZMA_PRIORITY 70 -+#define JFFS2_ZLIB_PRIORITY 80 -+#define JFFS2_LZO_PRIORITY 90 - - #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */ - #define JFFS2_DYNRUBIN_DISABLED /* for decompression */ -@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void); - int jffs2_lzo_init(void); - void jffs2_lzo_exit(void); - #endif -+#ifdef CONFIG_JFFS2_LZMA -+int jffs2_lzma_init(void); -+void jffs2_lzma_exit(void); -+#endif - - #endif /* __JFFS2_COMPR_H__ */ ---- /dev/null -+++ b/fs/jffs2/compr_lzma.c -@@ -0,0 +1,128 @@ -+/* -+ * JFFS2 -- Journalling Flash File System, Version 2. -+ * -+ * For licensing information, see the file 'LICENCE' in this directory. -+ * -+ * JFFS2 wrapper to the LZMA C SDK -+ * -+ */ -+ -+#include <linux/lzma.h> -+#include "compr.h" -+ -+#ifdef __KERNEL__ -+ static DEFINE_MUTEX(deflate_mutex); -+#endif -+ -+CLzmaEncHandle *p; -+Byte propsEncoded[LZMA_PROPS_SIZE]; -+SizeT propsSize = sizeof(propsEncoded); -+ -+STATIC void lzma_free_workspace(void) -+{ -+ LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc); -+} -+ -+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props) -+{ -+ if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL) -+ { -+ PRINT_ERROR("Failed to allocate lzma deflate workspace\n"); -+ return -ENOMEM; -+ } -+ -+ if (LzmaEnc_SetProps(p, props) != SZ_OK) -+ { -+ lzma_free_workspace(); -+ return -1; -+ } -+ -+ if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK) -+ { -+ lzma_free_workspace(); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out, -+ uint32_t *sourcelen, uint32_t *dstlen) -+{ -+ SizeT compress_size = (SizeT)(*dstlen); -+ int ret; -+ -+ #ifdef __KERNEL__ -+ mutex_lock(&deflate_mutex); -+ #endif -+ -+ ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen, -+ 0, NULL, &lzma_alloc, &lzma_alloc); -+ -+ #ifdef __KERNEL__ -+ mutex_unlock(&deflate_mutex); -+ #endif -+ -+ if (ret != SZ_OK) -+ return -1; -+ -+ *dstlen = (uint32_t)compress_size; -+ -+ return 0; -+} -+ -+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out, -+ uint32_t srclen, uint32_t destlen) -+{ -+ int ret; -+ SizeT dl = (SizeT)destlen; -+ SizeT sl = (SizeT)srclen; -+ ELzmaStatus status; -+ -+ ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded, -+ propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc); -+ -+ if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen) -+ return -1; -+ -+ return 0; -+} -+ -+static struct jffs2_compressor jffs2_lzma_comp = { -+ .priority = JFFS2_LZMA_PRIORITY, -+ .name = "lzma", -+ .compr = JFFS2_COMPR_LZMA, -+ .compress = &jffs2_lzma_compress, -+ .decompress = &jffs2_lzma_decompress, -+ .disabled = 0, -+}; -+ -+int INIT jffs2_lzma_init(void) -+{ -+ int ret; -+ CLzmaEncProps props; -+ LzmaEncProps_Init(&props); -+ -+ props.dictSize = LZMA_BEST_DICT(0x2000); -+ props.level = LZMA_BEST_LEVEL; -+ props.lc = LZMA_BEST_LC; -+ props.lp = LZMA_BEST_LP; -+ props.pb = LZMA_BEST_PB; -+ props.fb = LZMA_BEST_FB; -+ -+ ret = lzma_alloc_workspace(&props); -+ if (ret < 0) -+ return ret; -+ -+ ret = jffs2_register_compressor(&jffs2_lzma_comp); -+ if (ret) -+ lzma_free_workspace(); -+ -+ return ret; -+} -+ -+void jffs2_lzma_exit(void) -+{ -+ jffs2_unregister_compressor(&jffs2_lzma_comp); -+ lzma_free_workspace(); -+} ---- a/fs/jffs2/super.c -+++ b/fs/jffs2/super.c -@@ -375,14 +375,41 @@ static int __init init_jffs2_fs(void) - BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68); - BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32); - -- pr_info("version 2.2." -+ pr_info("version 2.2" - #ifdef CONFIG_JFFS2_FS_WRITEBUFFER - " (NAND)" - #endif - #ifdef CONFIG_JFFS2_SUMMARY -- " (SUMMARY) " -+ " (SUMMARY)" - #endif -- " © 2001-2006 Red Hat, Inc.\n"); -+#ifdef CONFIG_JFFS2_ZLIB -+ " (ZLIB)" -+#endif -+#ifdef CONFIG_JFFS2_LZO -+ " (LZO)" -+#endif -+#ifdef CONFIG_JFFS2_LZMA -+ " (LZMA)" -+#endif -+#ifdef CONFIG_JFFS2_RTIME -+ " (RTIME)" -+#endif -+#ifdef CONFIG_JFFS2_RUBIN -+ " (RUBIN)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_NONE -+ " (CMODE_NONE)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_PRIORITY -+ " (CMODE_PRIORITY)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_SIZE -+ " (CMODE_SIZE)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO -+ " (CMODE_FAVOURLZO)" -+#endif -+ " (c) 2001-2006 Red Hat, Inc.\n"); - - jffs2_inode_cachep = kmem_cache_create("jffs2_i", - sizeof(struct jffs2_inode_info), ---- a/include/uapi/linux/jffs2.h -+++ b/include/uapi/linux/jffs2.h -@@ -46,6 +46,7 @@ - #define JFFS2_COMPR_DYNRUBIN 0x05 - #define JFFS2_COMPR_ZLIB 0x06 - #define JFFS2_COMPR_LZO 0x07 -+#define JFFS2_COMPR_LZMA 0x08 - /* Compatibility flags. */ - #define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */ - #define JFFS2_NODE_ACCURATE 0x2000 ---- /dev/null -+++ b/include/linux/lzma.h -@@ -0,0 +1,62 @@ -+#ifndef __LZMA_H__ -+#define __LZMA_H__ -+ -+#ifdef __KERNEL__ -+ #include <linux/kernel.h> -+ #include <linux/sched.h> -+ #include <linux/slab.h> -+ #include <linux/vmalloc.h> -+ #include <linux/init.h> -+ #define LZMA_MALLOC vmalloc -+ #define LZMA_FREE vfree -+ #define PRINT_ERROR(msg) printk(KERN_WARNING #msg) -+ #define INIT __init -+ #define STATIC static -+#else -+ #include <stdint.h> -+ #include <stdlib.h> -+ #include <stdio.h> -+ #include <unistd.h> -+ #include <string.h> -+ #include <asm/types.h> -+ #include <errno.h> -+ #include <linux/jffs2.h> -+ #ifndef PAGE_SIZE -+ extern int page_size; -+ #define PAGE_SIZE page_size -+ #endif -+ #define LZMA_MALLOC malloc -+ #define LZMA_FREE free -+ #define PRINT_ERROR(msg) fprintf(stderr, msg) -+ #define INIT -+ #define STATIC -+#endif -+ -+#include "lzma/LzmaDec.h" -+#include "lzma/LzmaEnc.h" -+ -+#define LZMA_BEST_LEVEL (9) -+#define LZMA_BEST_LC (0) -+#define LZMA_BEST_LP (0) -+#define LZMA_BEST_PB (0) -+#define LZMA_BEST_FB (273) -+ -+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2) -+ -+static void *p_lzma_malloc(void *p, size_t size) -+{ -+ if (size == 0) -+ return NULL; -+ -+ return LZMA_MALLOC(size); -+} -+ -+static void p_lzma_free(void *p, void *address) -+{ -+ if (address != NULL) -+ LZMA_FREE(address); -+} -+ -+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free}; -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzFind.h -@@ -0,0 +1,115 @@ -+/* LzFind.h -- Match finder for LZ algorithms -+2009-04-22 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZ_FIND_H -+#define __LZ_FIND_H -+ -+#include "Types.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+typedef UInt32 CLzRef; -+ -+typedef struct _CMatchFinder -+{ -+ Byte *buffer; -+ UInt32 pos; -+ UInt32 posLimit; -+ UInt32 streamPos; -+ UInt32 lenLimit; -+ -+ UInt32 cyclicBufferPos; -+ UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */ -+ -+ UInt32 matchMaxLen; -+ CLzRef *hash; -+ CLzRef *son; -+ UInt32 hashMask; -+ UInt32 cutValue; -+ -+ Byte *bufferBase; -+ ISeqInStream *stream; -+ int streamEndWasReached; -+ -+ UInt32 blockSize; -+ UInt32 keepSizeBefore; -+ UInt32 keepSizeAfter; -+ -+ UInt32 numHashBytes; -+ int directInput; -+ size_t directInputRem; -+ int btMode; -+ int bigHash; -+ UInt32 historySize; -+ UInt32 fixedHashSize; -+ UInt32 hashSizeSum; -+ UInt32 numSons; -+ SRes result; -+ UInt32 crc[256]; -+} CMatchFinder; -+ -+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer) -+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)]) -+ -+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos) -+ -+int MatchFinder_NeedMove(CMatchFinder *p); -+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p); -+void MatchFinder_MoveBlock(CMatchFinder *p); -+void MatchFinder_ReadIfRequired(CMatchFinder *p); -+ -+void MatchFinder_Construct(CMatchFinder *p); -+ -+/* Conditions: -+ historySize <= 3 GB -+ keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB -+*/ -+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize, -+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, -+ ISzAlloc *alloc); -+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc); -+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems); -+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue); -+ -+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue, -+ UInt32 *distances, UInt32 maxLen); -+ -+/* -+Conditions: -+ Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func. -+ Mf_GetPointerToCurrentPos_Func's result must be used only before any other function -+*/ -+ -+typedef void (*Mf_Init_Func)(void *object); -+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index); -+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object); -+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object); -+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances); -+typedef void (*Mf_Skip_Func)(void *object, UInt32); -+ -+typedef struct _IMatchFinder -+{ -+ Mf_Init_Func Init; -+ Mf_GetIndexByte_Func GetIndexByte; -+ Mf_GetNumAvailableBytes_Func GetNumAvailableBytes; -+ Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos; -+ Mf_GetMatches_Func GetMatches; -+ Mf_Skip_Func Skip; -+} IMatchFinder; -+ -+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable); -+ -+void MatchFinder_Init(CMatchFinder *p); -+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); -+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); -+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); -+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzHash.h -@@ -0,0 +1,54 @@ -+/* LzHash.h -- HASH functions for LZ algorithms -+2009-02-07 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZ_HASH_H -+#define __LZ_HASH_H -+ -+#define kHash2Size (1 << 10) -+#define kHash3Size (1 << 16) -+#define kHash4Size (1 << 20) -+ -+#define kFix3HashSize (kHash2Size) -+#define kFix4HashSize (kHash2Size + kHash3Size) -+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size) -+ -+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8); -+ -+#define HASH3_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; } -+ -+#define HASH4_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ -+ hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; } -+ -+#define HASH5_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ -+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \ -+ hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \ -+ hash4Value &= (kHash4Size - 1); } -+ -+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */ -+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF; -+ -+ -+#define MT_HASH2_CALC \ -+ hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1); -+ -+#define MT_HASH3_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); } -+ -+#define MT_HASH4_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ -+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); } -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzmaDec.h -@@ -0,0 +1,231 @@ -+/* LzmaDec.h -- LZMA Decoder -+2009-02-07 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZMA_DEC_H -+#define __LZMA_DEC_H -+ -+#include "Types.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* #define _LZMA_PROB32 */ -+/* _LZMA_PROB32 can increase the speed on some CPUs, -+ but memory usage for CLzmaDec::probs will be doubled in that case */ -+ -+#ifdef _LZMA_PROB32 -+#define CLzmaProb UInt32 -+#else -+#define CLzmaProb UInt16 -+#endif -+ -+ -+/* ---------- LZMA Properties ---------- */ -+ -+#define LZMA_PROPS_SIZE 5 -+ -+typedef struct _CLzmaProps -+{ -+ unsigned lc, lp, pb; -+ UInt32 dicSize; -+} CLzmaProps; -+ -+/* LzmaProps_Decode - decodes properties -+Returns: -+ SZ_OK -+ SZ_ERROR_UNSUPPORTED - Unsupported properties -+*/ -+ -+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); -+ -+ -+/* ---------- LZMA Decoder state ---------- */ -+ -+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. -+ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ -+ -+#define LZMA_REQUIRED_INPUT_MAX 20 -+ -+typedef struct -+{ -+ CLzmaProps prop; -+ CLzmaProb *probs; -+ Byte *dic; -+ const Byte *buf; -+ UInt32 range, code; -+ SizeT dicPos; -+ SizeT dicBufSize; -+ UInt32 processedPos; -+ UInt32 checkDicSize; -+ unsigned state; -+ UInt32 reps[4]; -+ unsigned remainLen; -+ int needFlush; -+ int needInitState; -+ UInt32 numProbs; -+ unsigned tempBufSize; -+ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX]; -+} CLzmaDec; -+ -+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; } -+ -+void LzmaDec_Init(CLzmaDec *p); -+ -+/* There are two types of LZMA streams: -+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. -+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ -+ -+typedef enum -+{ -+ LZMA_FINISH_ANY, /* finish at any point */ -+ LZMA_FINISH_END /* block must be finished at the end */ -+} ELzmaFinishMode; -+ -+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! -+ -+ You must use LZMA_FINISH_END, when you know that current output buffer -+ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. -+ -+ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, -+ and output value of destLen will be less than output buffer size limit. -+ You can check status result also. -+ -+ You can use multiple checks to test data integrity after full decompression: -+ 1) Check Result and "status" variable. -+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. -+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. -+ You must use correct finish mode in that case. */ -+ -+typedef enum -+{ -+ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ -+ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ -+ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ -+ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ -+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ -+} ELzmaStatus; -+ -+/* ELzmaStatus is used only as output value for function call */ -+ -+ -+/* ---------- Interfaces ---------- */ -+ -+/* There are 3 levels of interfaces: -+ 1) Dictionary Interface -+ 2) Buffer Interface -+ 3) One Call Interface -+ You can select any of these interfaces, but don't mix functions from different -+ groups for same object. */ -+ -+ -+/* There are two variants to allocate state for Dictionary Interface: -+ 1) LzmaDec_Allocate / LzmaDec_Free -+ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs -+ You can use variant 2, if you set dictionary buffer manually. -+ For Buffer Interface you must always use variant 1. -+ -+LzmaDec_Allocate* can return: -+ SZ_OK -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_UNSUPPORTED - Unsupported properties -+*/ -+ -+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc); -+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc); -+ -+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc); -+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc); -+ -+/* ---------- Dictionary Interface ---------- */ -+ -+/* You can use it, if you want to eliminate the overhead for data copying from -+ dictionary to some other external buffer. -+ You must work with CLzmaDec variables directly in this interface. -+ -+ STEPS: -+ LzmaDec_Constr() -+ LzmaDec_Allocate() -+ for (each new stream) -+ { -+ LzmaDec_Init() -+ while (it needs more decompression) -+ { -+ LzmaDec_DecodeToDic() -+ use data from CLzmaDec::dic and update CLzmaDec::dicPos -+ } -+ } -+ LzmaDec_Free() -+*/ -+ -+/* LzmaDec_DecodeToDic -+ -+ The decoding to internal dictionary buffer (CLzmaDec::dic). -+ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! -+ -+finishMode: -+ It has meaning only if the decoding reaches output limit (dicLimit). -+ LZMA_FINISH_ANY - Decode just dicLimit bytes. -+ LZMA_FINISH_END - Stream must be finished after dicLimit. -+ -+Returns: -+ SZ_OK -+ status: -+ LZMA_STATUS_FINISHED_WITH_MARK -+ LZMA_STATUS_NOT_FINISHED -+ LZMA_STATUS_NEEDS_MORE_INPUT -+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK -+ SZ_ERROR_DATA - Data error -+*/ -+ -+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, -+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -+ -+ -+/* ---------- Buffer Interface ---------- */ -+ -+/* It's zlib-like interface. -+ See LzmaDec_DecodeToDic description for information about STEPS and return results, -+ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need -+ to work with CLzmaDec variables manually. -+ -+finishMode: -+ It has meaning only if the decoding reaches output limit (*destLen). -+ LZMA_FINISH_ANY - Decode just destLen bytes. -+ LZMA_FINISH_END - Stream must be finished after (*destLen). -+*/ -+ -+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, -+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -+ -+ -+/* ---------- One Call Interface ---------- */ -+ -+/* LzmaDecode -+ -+finishMode: -+ It has meaning only if the decoding reaches output limit (*destLen). -+ LZMA_FINISH_ANY - Decode just destLen bytes. -+ LZMA_FINISH_END - Stream must be finished after (*destLen). -+ -+Returns: -+ SZ_OK -+ status: -+ LZMA_STATUS_FINISHED_WITH_MARK -+ LZMA_STATUS_NOT_FINISHED -+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK -+ SZ_ERROR_DATA - Data error -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_UNSUPPORTED - Unsupported properties -+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). -+*/ -+ -+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, -+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, -+ ELzmaStatus *status, ISzAlloc *alloc); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzmaEnc.h -@@ -0,0 +1,80 @@ -+/* LzmaEnc.h -- LZMA Encoder -+2009-02-07 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZMA_ENC_H -+#define __LZMA_ENC_H -+ -+#include "Types.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define LZMA_PROPS_SIZE 5 -+ -+typedef struct _CLzmaEncProps -+{ -+ int level; /* 0 <= level <= 9 */ -+ UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version -+ (1 << 12) <= dictSize <= (1 << 30) for 64-bit version -+ default = (1 << 24) */ -+ int lc; /* 0 <= lc <= 8, default = 3 */ -+ int lp; /* 0 <= lp <= 4, default = 0 */ -+ int pb; /* 0 <= pb <= 4, default = 2 */ -+ int algo; /* 0 - fast, 1 - normal, default = 1 */ -+ int fb; /* 5 <= fb <= 273, default = 32 */ -+ int btMode; /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */ -+ int numHashBytes; /* 2, 3 or 4, default = 4 */ -+ UInt32 mc; /* 1 <= mc <= (1 << 30), default = 32 */ -+ unsigned writeEndMark; /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */ -+ int numThreads; /* 1 or 2, default = 2 */ -+} CLzmaEncProps; -+ -+void LzmaEncProps_Init(CLzmaEncProps *p); -+void LzmaEncProps_Normalize(CLzmaEncProps *p); -+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2); -+ -+ -+/* ---------- CLzmaEncHandle Interface ---------- */ -+ -+/* LzmaEnc_* functions can return the following exit codes: -+Returns: -+ SZ_OK - OK -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_PARAM - Incorrect paramater in props -+ SZ_ERROR_WRITE - Write callback error. -+ SZ_ERROR_PROGRESS - some break from progress callback -+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) -+*/ -+ -+typedef void * CLzmaEncHandle; -+ -+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc); -+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig); -+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props); -+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size); -+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream, -+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -+ -+/* ---------- One Call Interface ---------- */ -+ -+/* LzmaEncode -+Return code: -+ SZ_OK - OK -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_PARAM - Incorrect paramater -+ SZ_ERROR_OUTPUT_EOF - output buffer overflow -+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) -+*/ -+ -+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, -+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/Types.h -@@ -0,0 +1,226 @@ -+/* Types.h -- Basic types -+2009-11-23 : Igor Pavlov : Public domain */ -+ -+#ifndef __7Z_TYPES_H -+#define __7Z_TYPES_H -+ -+#include <stddef.h> -+ -+#ifdef _WIN32 -+#include <windows.h> -+#endif -+ -+#ifndef EXTERN_C_BEGIN -+#ifdef __cplusplus -+#define EXTERN_C_BEGIN extern "C" { -+#define EXTERN_C_END } -+#else -+#define EXTERN_C_BEGIN -+#define EXTERN_C_END -+#endif -+#endif -+ -+EXTERN_C_BEGIN -+ -+#define SZ_OK 0 -+ -+#define SZ_ERROR_DATA 1 -+#define SZ_ERROR_MEM 2 -+#define SZ_ERROR_CRC 3 -+#define SZ_ERROR_UNSUPPORTED 4 -+#define SZ_ERROR_PARAM 5 -+#define SZ_ERROR_INPUT_EOF 6 -+#define SZ_ERROR_OUTPUT_EOF 7 -+#define SZ_ERROR_READ 8 -+#define SZ_ERROR_WRITE 9 -+#define SZ_ERROR_PROGRESS 10 -+#define SZ_ERROR_FAIL 11 -+#define SZ_ERROR_THREAD 12 -+ -+#define SZ_ERROR_ARCHIVE 16 -+#define SZ_ERROR_NO_ARCHIVE 17 -+ -+typedef int SRes; -+ -+#ifdef _WIN32 -+typedef DWORD WRes; -+#else -+typedef int WRes; -+#endif -+ -+#ifndef RINOK -+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; } -+#endif -+ -+typedef unsigned char Byte; -+typedef short Int16; -+typedef unsigned short UInt16; -+ -+#ifdef _LZMA_UINT32_IS_ULONG -+typedef long Int32; -+typedef unsigned long UInt32; -+#else -+typedef int Int32; -+typedef unsigned int UInt32; -+#endif -+ -+#ifdef _SZ_NO_INT_64 -+ -+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers. -+ NOTES: Some code will work incorrectly in that case! */ -+ -+typedef long Int64; -+typedef unsigned long UInt64; -+ -+#else -+ -+#if defined(_MSC_VER) || defined(__BORLANDC__) -+typedef __int64 Int64; -+typedef unsigned __int64 UInt64; -+#else -+typedef long long int Int64; -+typedef unsigned long long int UInt64; -+#endif -+ -+#endif -+ -+#ifdef _LZMA_NO_SYSTEM_SIZE_T -+typedef UInt32 SizeT; -+#else -+typedef size_t SizeT; -+#endif -+ -+typedef int Bool; -+#define True 1 -+#define False 0 -+ -+ -+#ifdef _WIN32 -+#define MY_STD_CALL __stdcall -+#else -+#define MY_STD_CALL -+#endif -+ -+#ifdef _MSC_VER -+ -+#if _MSC_VER >= 1300 -+#define MY_NO_INLINE __declspec(noinline) -+#else -+#define MY_NO_INLINE -+#endif -+ -+#define MY_CDECL __cdecl -+#define MY_FAST_CALL __fastcall -+ -+#else -+ -+#define MY_CDECL -+#define MY_FAST_CALL -+ -+#endif -+ -+ -+/* The following interfaces use first parameter as pointer to structure */ -+ -+typedef struct -+{ -+ SRes (*Read)(void *p, void *buf, size_t *size); -+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. -+ (output(*size) < input(*size)) is allowed */ -+} ISeqInStream; -+ -+/* it can return SZ_ERROR_INPUT_EOF */ -+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size); -+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType); -+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf); -+ -+typedef struct -+{ -+ size_t (*Write)(void *p, const void *buf, size_t size); -+ /* Returns: result - the number of actually written bytes. -+ (result < size) means error */ -+} ISeqOutStream; -+ -+typedef enum -+{ -+ SZ_SEEK_SET = 0, -+ SZ_SEEK_CUR = 1, -+ SZ_SEEK_END = 2 -+} ESzSeek; -+ -+typedef struct -+{ -+ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */ -+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); -+} ISeekInStream; -+ -+typedef struct -+{ -+ SRes (*Look)(void *p, void **buf, size_t *size); -+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. -+ (output(*size) > input(*size)) is not allowed -+ (output(*size) < input(*size)) is allowed */ -+ SRes (*Skip)(void *p, size_t offset); -+ /* offset must be <= output(*size) of Look */ -+ -+ SRes (*Read)(void *p, void *buf, size_t *size); -+ /* reads directly (without buffer). It's same as ISeqInStream::Read */ -+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); -+} ILookInStream; -+ -+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size); -+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset); -+ -+/* reads via ILookInStream::Read */ -+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType); -+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size); -+ -+#define LookToRead_BUF_SIZE (1 << 14) -+ -+typedef struct -+{ -+ ILookInStream s; -+ ISeekInStream *realStream; -+ size_t pos; -+ size_t size; -+ Byte buf[LookToRead_BUF_SIZE]; -+} CLookToRead; -+ -+void LookToRead_CreateVTable(CLookToRead *p, int lookahead); -+void LookToRead_Init(CLookToRead *p); -+ -+typedef struct -+{ -+ ISeqInStream s; -+ ILookInStream *realStream; -+} CSecToLook; -+ -+void SecToLook_CreateVTable(CSecToLook *p); -+ -+typedef struct -+{ -+ ISeqInStream s; -+ ILookInStream *realStream; -+} CSecToRead; -+ -+void SecToRead_CreateVTable(CSecToRead *p); -+ -+typedef struct -+{ -+ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize); -+ /* Returns: result. (result != SZ_OK) means break. -+ Value (UInt64)(Int64)-1 for size means unknown value. */ -+} ICompressProgress; -+ -+typedef struct -+{ -+ void *(*Alloc)(void *p, size_t size); -+ void (*Free)(void *p, void *address); /* address can be 0 */ -+} ISzAlloc; -+ -+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size) -+#define IAlloc_Free(p, a) (p)->Free((p), a) -+ -+EXTERN_C_END -+ -+#endif ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -241,6 +241,12 @@ config LZ4_DECOMPRESS - - source "lib/xz/Kconfig" - -+config LZMA_COMPRESS -+ tristate -+ -+config LZMA_DECOMPRESS -+ tristate -+ - # - # These all provide a common interface (hence the apparent duplication with - # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) ---- a/lib/Makefile -+++ b/lib/Makefile -@@ -2,6 +2,16 @@ - # Makefile for some libs needed in the kernel. - # - -+ifdef CONFIG_JFFS2_ZLIB -+ CONFIG_ZLIB_INFLATE:=y -+ CONFIG_ZLIB_DEFLATE:=y -+endif -+ -+ifdef CONFIG_JFFS2_LZMA -+ CONFIG_LZMA_DECOMPRESS:=y -+ CONFIG_LZMA_COMPRESS:=y -+endif -+ - ifdef CONFIG_FUNCTION_TRACER - ORIG_CFLAGS := $(KBUILD_CFLAGS) - KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS)) -@@ -98,6 +108,8 @@ obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/ - obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/ - obj-$(CONFIG_XZ_DEC) += xz/ - obj-$(CONFIG_RAID6_PQ) += raid6/ -+obj-$(CONFIG_LZMA_COMPRESS) += lzma/ -+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ - - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o - lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o ---- /dev/null -+++ b/lib/lzma/LzFind.c -@@ -0,0 +1,761 @@ -+/* LzFind.c -- Match finder for LZ algorithms -+2009-04-22 : Igor Pavlov : Public domain */ -+ -+#include <string.h> -+ -+#include "LzFind.h" -+#include "LzHash.h" -+ -+#define kEmptyHashValue 0 -+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF) -+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */ -+#define kNormalizeMask (~(kNormalizeStepMin - 1)) -+#define kMaxHistorySize ((UInt32)3 << 30) -+ -+#define kStartMaxLen 3 -+ -+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc) -+{ -+ if (!p->directInput) -+ { -+ alloc->Free(alloc, p->bufferBase); -+ p->bufferBase = 0; -+ } -+} -+ -+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */ -+ -+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc) -+{ -+ UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv; -+ if (p->directInput) -+ { -+ p->blockSize = blockSize; -+ return 1; -+ } -+ if (p->bufferBase == 0 || p->blockSize != blockSize) -+ { -+ LzInWindow_Free(p, alloc); -+ p->blockSize = blockSize; -+ p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize); -+ } -+ return (p->bufferBase != 0); -+} -+ -+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } -+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } -+ -+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } -+ -+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) -+{ -+ p->posLimit -= subValue; -+ p->pos -= subValue; -+ p->streamPos -= subValue; -+} -+ -+static void MatchFinder_ReadBlock(CMatchFinder *p) -+{ -+ if (p->streamEndWasReached || p->result != SZ_OK) -+ return; -+ if (p->directInput) -+ { -+ UInt32 curSize = 0xFFFFFFFF - p->streamPos; -+ if (curSize > p->directInputRem) -+ curSize = (UInt32)p->directInputRem; -+ p->directInputRem -= curSize; -+ p->streamPos += curSize; -+ if (p->directInputRem == 0) -+ p->streamEndWasReached = 1; -+ return; -+ } -+ for (;;) -+ { -+ Byte *dest = p->buffer + (p->streamPos - p->pos); -+ size_t size = (p->bufferBase + p->blockSize - dest); -+ if (size == 0) -+ return; -+ p->result = p->stream->Read(p->stream, dest, &size); -+ if (p->result != SZ_OK) -+ return; -+ if (size == 0) -+ { -+ p->streamEndWasReached = 1; -+ return; -+ } -+ p->streamPos += (UInt32)size; -+ if (p->streamPos - p->pos > p->keepSizeAfter) -+ return; -+ } -+} -+ -+void MatchFinder_MoveBlock(CMatchFinder *p) -+{ -+ memmove(p->bufferBase, -+ p->buffer - p->keepSizeBefore, -+ (size_t)(p->streamPos - p->pos + p->keepSizeBefore)); -+ p->buffer = p->bufferBase + p->keepSizeBefore; -+} -+ -+int MatchFinder_NeedMove(CMatchFinder *p) -+{ -+ if (p->directInput) -+ return 0; -+ /* if (p->streamEndWasReached) return 0; */ -+ return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter); -+} -+ -+void MatchFinder_ReadIfRequired(CMatchFinder *p) -+{ -+ if (p->streamEndWasReached) -+ return; -+ if (p->keepSizeAfter >= p->streamPos - p->pos) -+ MatchFinder_ReadBlock(p); -+} -+ -+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p) -+{ -+ if (MatchFinder_NeedMove(p)) -+ MatchFinder_MoveBlock(p); -+ MatchFinder_ReadBlock(p); -+} -+ -+static void MatchFinder_SetDefaultSettings(CMatchFinder *p) -+{ -+ p->cutValue = 32; -+ p->btMode = 1; -+ p->numHashBytes = 4; -+ p->bigHash = 0; -+} -+ -+#define kCrcPoly 0xEDB88320 -+ -+void MatchFinder_Construct(CMatchFinder *p) -+{ -+ UInt32 i; -+ p->bufferBase = 0; -+ p->directInput = 0; -+ p->hash = 0; -+ MatchFinder_SetDefaultSettings(p); -+ -+ for (i = 0; i < 256; i++) -+ { -+ UInt32 r = i; -+ int j; -+ for (j = 0; j < 8; j++) -+ r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1)); -+ p->crc[i] = r; -+ } -+} -+ -+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->hash); -+ p->hash = 0; -+} -+ -+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc) -+{ -+ MatchFinder_FreeThisClassMemory(p, alloc); -+ LzInWindow_Free(p, alloc); -+} -+ -+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc) -+{ -+ size_t sizeInBytes = (size_t)num * sizeof(CLzRef); -+ if (sizeInBytes / sizeof(CLzRef) != num) -+ return 0; -+ return (CLzRef *)alloc->Alloc(alloc, sizeInBytes); -+} -+ -+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize, -+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, -+ ISzAlloc *alloc) -+{ -+ UInt32 sizeReserv; -+ if (historySize > kMaxHistorySize) -+ { -+ MatchFinder_Free(p, alloc); -+ return 0; -+ } -+ sizeReserv = historySize >> 1; -+ if (historySize > ((UInt32)2 << 30)) -+ sizeReserv = historySize >> 2; -+ sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19); -+ -+ p->keepSizeBefore = historySize + keepAddBufferBefore + 1; -+ p->keepSizeAfter = matchMaxLen + keepAddBufferAfter; -+ /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */ -+ if (LzInWindow_Create(p, sizeReserv, alloc)) -+ { -+ UInt32 newCyclicBufferSize = historySize + 1; -+ UInt32 hs; -+ p->matchMaxLen = matchMaxLen; -+ { -+ p->fixedHashSize = 0; -+ if (p->numHashBytes == 2) -+ hs = (1 << 16) - 1; -+ else -+ { -+ hs = historySize - 1; -+ hs |= (hs >> 1); -+ hs |= (hs >> 2); -+ hs |= (hs >> 4); -+ hs |= (hs >> 8); -+ hs >>= 1; -+ hs |= 0xFFFF; /* don't change it! It's required for Deflate */ -+ if (hs > (1 << 24)) -+ { -+ if (p->numHashBytes == 3) -+ hs = (1 << 24) - 1; -+ else -+ hs >>= 1; -+ } -+ } -+ p->hashMask = hs; -+ hs++; -+ if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size; -+ if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size; -+ if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size; -+ hs += p->fixedHashSize; -+ } -+ -+ { -+ UInt32 prevSize = p->hashSizeSum + p->numSons; -+ UInt32 newSize; -+ p->historySize = historySize; -+ p->hashSizeSum = hs; -+ p->cyclicBufferSize = newCyclicBufferSize; -+ p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize); -+ newSize = p->hashSizeSum + p->numSons; -+ if (p->hash != 0 && prevSize == newSize) -+ return 1; -+ MatchFinder_FreeThisClassMemory(p, alloc); -+ p->hash = AllocRefs(newSize, alloc); -+ if (p->hash != 0) -+ { -+ p->son = p->hash + p->hashSizeSum; -+ return 1; -+ } -+ } -+ } -+ MatchFinder_Free(p, alloc); -+ return 0; -+} -+ -+static void MatchFinder_SetLimits(CMatchFinder *p) -+{ -+ UInt32 limit = kMaxValForNormalize - p->pos; -+ UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos; -+ if (limit2 < limit) -+ limit = limit2; -+ limit2 = p->streamPos - p->pos; -+ if (limit2 <= p->keepSizeAfter) -+ { -+ if (limit2 > 0) -+ limit2 = 1; -+ } -+ else -+ limit2 -= p->keepSizeAfter; -+ if (limit2 < limit) -+ limit = limit2; -+ { -+ UInt32 lenLimit = p->streamPos - p->pos; -+ if (lenLimit > p->matchMaxLen) -+ lenLimit = p->matchMaxLen; -+ p->lenLimit = lenLimit; -+ } -+ p->posLimit = p->pos + limit; -+} -+ -+void MatchFinder_Init(CMatchFinder *p) -+{ -+ UInt32 i; -+ for (i = 0; i < p->hashSizeSum; i++) -+ p->hash[i] = kEmptyHashValue; -+ p->cyclicBufferPos = 0; -+ p->buffer = p->bufferBase; -+ p->pos = p->streamPos = p->cyclicBufferSize; -+ p->result = SZ_OK; -+ p->streamEndWasReached = 0; -+ MatchFinder_ReadBlock(p); -+ MatchFinder_SetLimits(p); -+} -+ -+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p) -+{ -+ return (p->pos - p->historySize - 1) & kNormalizeMask; -+} -+ -+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) -+{ -+ UInt32 i; -+ for (i = 0; i < numItems; i++) -+ { -+ UInt32 value = items[i]; -+ if (value <= subValue) -+ value = kEmptyHashValue; -+ else -+ value -= subValue; -+ items[i] = value; -+ } -+} -+ -+static void MatchFinder_Normalize(CMatchFinder *p) -+{ -+ UInt32 subValue = MatchFinder_GetSubValue(p); -+ MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons); -+ MatchFinder_ReduceOffsets(p, subValue); -+} -+ -+static void MatchFinder_CheckLimits(CMatchFinder *p) -+{ -+ if (p->pos == kMaxValForNormalize) -+ MatchFinder_Normalize(p); -+ if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos) -+ MatchFinder_CheckAndMoveAndRead(p); -+ if (p->cyclicBufferPos == p->cyclicBufferSize) -+ p->cyclicBufferPos = 0; -+ MatchFinder_SetLimits(p); -+} -+ -+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, -+ UInt32 *distances, UInt32 maxLen) -+{ -+ son[_cyclicBufferPos] = curMatch; -+ for (;;) -+ { -+ UInt32 delta = pos - curMatch; -+ if (cutValue-- == 0 || delta >= _cyclicBufferSize) -+ return distances; -+ { -+ const Byte *pb = cur - delta; -+ curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)]; -+ if (pb[maxLen] == cur[maxLen] && *pb == *cur) -+ { -+ UInt32 len = 0; -+ while (++len != lenLimit) -+ if (pb[len] != cur[len]) -+ break; -+ if (maxLen < len) -+ { -+ *distances++ = maxLen = len; -+ *distances++ = delta - 1; -+ if (len == lenLimit) -+ return distances; -+ } -+ } -+ } -+ } -+} -+ -+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, -+ UInt32 *distances, UInt32 maxLen) -+{ -+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1; -+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1); -+ UInt32 len0 = 0, len1 = 0; -+ for (;;) -+ { -+ UInt32 delta = pos - curMatch; -+ if (cutValue-- == 0 || delta >= _cyclicBufferSize) -+ { -+ *ptr0 = *ptr1 = kEmptyHashValue; -+ return distances; -+ } -+ { -+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1); -+ const Byte *pb = cur - delta; -+ UInt32 len = (len0 < len1 ? len0 : len1); -+ if (pb[len] == cur[len]) -+ { -+ if (++len != lenLimit && pb[len] == cur[len]) -+ while (++len != lenLimit) -+ if (pb[len] != cur[len]) -+ break; -+ if (maxLen < len) -+ { -+ *distances++ = maxLen = len; -+ *distances++ = delta - 1; -+ if (len == lenLimit) -+ { -+ *ptr1 = pair[0]; -+ *ptr0 = pair[1]; -+ return distances; -+ } -+ } -+ } -+ if (pb[len] < cur[len]) -+ { -+ *ptr1 = curMatch; -+ ptr1 = pair + 1; -+ curMatch = *ptr1; -+ len1 = len; -+ } -+ else -+ { -+ *ptr0 = curMatch; -+ ptr0 = pair; -+ curMatch = *ptr0; -+ len0 = len; -+ } -+ } -+ } -+} -+ -+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue) -+{ -+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1; -+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1); -+ UInt32 len0 = 0, len1 = 0; -+ for (;;) -+ { -+ UInt32 delta = pos - curMatch; -+ if (cutValue-- == 0 || delta >= _cyclicBufferSize) -+ { -+ *ptr0 = *ptr1 = kEmptyHashValue; -+ return; -+ } -+ { -+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1); -+ const Byte *pb = cur - delta; -+ UInt32 len = (len0 < len1 ? len0 : len1); -+ if (pb[len] == cur[len]) -+ { -+ while (++len != lenLimit) -+ if (pb[len] != cur[len]) -+ break; -+ { -+ if (len == lenLimit) -+ { -+ *ptr1 = pair[0]; -+ *ptr0 = pair[1]; -+ return; -+ } -+ } -+ } -+ if (pb[len] < cur[len]) -+ { -+ *ptr1 = curMatch; -+ ptr1 = pair + 1; -+ curMatch = *ptr1; -+ len1 = len; -+ } -+ else -+ { -+ *ptr0 = curMatch; -+ ptr0 = pair; -+ curMatch = *ptr0; -+ len0 = len; -+ } -+ } -+ } -+} -+ -+#define MOVE_POS \ -+ ++p->cyclicBufferPos; \ -+ p->buffer++; \ -+ if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p); -+ -+#define MOVE_POS_RET MOVE_POS return offset; -+ -+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; } -+ -+#define GET_MATCHES_HEADER2(minLen, ret_op) \ -+ UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \ -+ lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \ -+ cur = p->buffer; -+ -+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0) -+#define SKIP_HEADER(minLen) GET_MATCHES_HEADER2(minLen, continue) -+ -+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue -+ -+#define GET_MATCHES_FOOTER(offset, maxLen) \ -+ offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \ -+ distances + offset, maxLen) - distances); MOVE_POS_RET; -+ -+#define SKIP_FOOTER \ -+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS; -+ -+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 offset; -+ GET_MATCHES_HEADER(2) -+ HASH2_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ offset = 0; -+ GET_MATCHES_FOOTER(offset, 1) -+} -+ -+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 offset; -+ GET_MATCHES_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ offset = 0; -+ GET_MATCHES_FOOTER(offset, 2) -+} -+ -+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 hash2Value, delta2, maxLen, offset; -+ GET_MATCHES_HEADER(3) -+ -+ HASH3_CALC; -+ -+ delta2 = p->pos - p->hash[hash2Value]; -+ curMatch = p->hash[kFix3HashSize + hashValue]; -+ -+ p->hash[hash2Value] = -+ p->hash[kFix3HashSize + hashValue] = p->pos; -+ -+ -+ maxLen = 2; -+ offset = 0; -+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -+ { -+ for (; maxLen != lenLimit; maxLen++) -+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -+ break; -+ distances[0] = maxLen; -+ distances[1] = delta2 - 1; -+ offset = 2; -+ if (maxLen == lenLimit) -+ { -+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); -+ MOVE_POS_RET; -+ } -+ } -+ GET_MATCHES_FOOTER(offset, maxLen) -+} -+ -+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; -+ GET_MATCHES_HEADER(4) -+ -+ HASH4_CALC; -+ -+ delta2 = p->pos - p->hash[ hash2Value]; -+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ -+ maxLen = 1; -+ offset = 0; -+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -+ { -+ distances[0] = maxLen = 2; -+ distances[1] = delta2 - 1; -+ offset = 2; -+ } -+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) -+ { -+ maxLen = 3; -+ distances[offset + 1] = delta3 - 1; -+ offset += 2; -+ delta2 = delta3; -+ } -+ if (offset != 0) -+ { -+ for (; maxLen != lenLimit; maxLen++) -+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -+ break; -+ distances[offset - 2] = maxLen; -+ if (maxLen == lenLimit) -+ { -+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); -+ MOVE_POS_RET; -+ } -+ } -+ if (maxLen < 3) -+ maxLen = 3; -+ GET_MATCHES_FOOTER(offset, maxLen) -+} -+ -+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; -+ GET_MATCHES_HEADER(4) -+ -+ HASH4_CALC; -+ -+ delta2 = p->pos - p->hash[ hash2Value]; -+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ -+ maxLen = 1; -+ offset = 0; -+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -+ { -+ distances[0] = maxLen = 2; -+ distances[1] = delta2 - 1; -+ offset = 2; -+ } -+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) -+ { -+ maxLen = 3; -+ distances[offset + 1] = delta3 - 1; -+ offset += 2; -+ delta2 = delta3; -+ } -+ if (offset != 0) -+ { -+ for (; maxLen != lenLimit; maxLen++) -+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -+ break; -+ distances[offset - 2] = maxLen; -+ if (maxLen == lenLimit) -+ { -+ p->son[p->cyclicBufferPos] = curMatch; -+ MOVE_POS_RET; -+ } -+ } -+ if (maxLen < 3) -+ maxLen = 3; -+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), -+ distances + offset, maxLen) - (distances)); -+ MOVE_POS_RET -+} -+ -+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 offset; -+ GET_MATCHES_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), -+ distances, 2) - (distances)); -+ MOVE_POS_RET -+} -+ -+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ SKIP_HEADER(2) -+ HASH2_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ SKIP_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ UInt32 hash2Value; -+ SKIP_HEADER(3) -+ HASH3_CALC; -+ curMatch = p->hash[kFix3HashSize + hashValue]; -+ p->hash[hash2Value] = -+ p->hash[kFix3HashSize + hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ UInt32 hash2Value, hash3Value; -+ SKIP_HEADER(4) -+ HASH4_CALC; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = p->pos; -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ UInt32 hash2Value, hash3Value; -+ SKIP_HEADER(4) -+ HASH4_CALC; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ p->son[p->cyclicBufferPos] = curMatch; -+ MOVE_POS -+ } -+ while (--num != 0); -+} -+ -+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ SKIP_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ p->son[p->cyclicBufferPos] = curMatch; -+ MOVE_POS -+ } -+ while (--num != 0); -+} -+ -+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable) -+{ -+ vTable->Init = (Mf_Init_Func)MatchFinder_Init; -+ vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte; -+ vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes; -+ vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos; -+ if (!p->btMode) -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip; -+ } -+ else if (p->numHashBytes == 2) -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip; -+ } -+ else if (p->numHashBytes == 3) -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip; -+ } -+ else -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; -+ } -+} ---- /dev/null -+++ b/lib/lzma/LzmaDec.c -@@ -0,0 +1,999 @@ -+/* LzmaDec.c -- LZMA Decoder -+2009-09-20 : Igor Pavlov : Public domain */ -+ -+#include "LzmaDec.h" -+ -+#include <string.h> -+ -+#define kNumTopBits 24 -+#define kTopValue ((UInt32)1 << kNumTopBits) -+ -+#define kNumBitModelTotalBits 11 -+#define kBitModelTotal (1 << kNumBitModelTotalBits) -+#define kNumMoveBits 5 -+ -+#define RC_INIT_SIZE 5 -+ -+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); } -+ -+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) -+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits)); -+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits)); -+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \ -+ { UPDATE_0(p); i = (i + i); A0; } else \ -+ { UPDATE_1(p); i = (i + i) + 1; A1; } -+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;) -+ -+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); } -+#define TREE_DECODE(probs, limit, i) \ -+ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; } -+ -+/* #define _LZMA_SIZE_OPT */ -+ -+#ifdef _LZMA_SIZE_OPT -+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i) -+#else -+#define TREE_6_DECODE(probs, i) \ -+ { i = 1; \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ i -= 0x40; } -+#endif -+ -+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); } -+ -+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) -+#define UPDATE_0_CHECK range = bound; -+#define UPDATE_1_CHECK range -= bound; code -= bound; -+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \ -+ { UPDATE_0_CHECK; i = (i + i); A0; } else \ -+ { UPDATE_1_CHECK; i = (i + i) + 1; A1; } -+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;) -+#define TREE_DECODE_CHECK(probs, limit, i) \ -+ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; } -+ -+ -+#define kNumPosBitsMax 4 -+#define kNumPosStatesMax (1 << kNumPosBitsMax) -+ -+#define kLenNumLowBits 3 -+#define kLenNumLowSymbols (1 << kLenNumLowBits) -+#define kLenNumMidBits 3 -+#define kLenNumMidSymbols (1 << kLenNumMidBits) -+#define kLenNumHighBits 8 -+#define kLenNumHighSymbols (1 << kLenNumHighBits) -+ -+#define LenChoice 0 -+#define LenChoice2 (LenChoice + 1) -+#define LenLow (LenChoice2 + 1) -+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) -+ -+ -+#define kNumStates 12 -+#define kNumLitStates 7 -+ -+#define kStartPosModelIndex 4 -+#define kEndPosModelIndex 14 -+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) -+ -+#define kNumPosSlotBits 6 -+#define kNumLenToPosStates 4 -+ -+#define kNumAlignBits 4 -+#define kAlignTableSize (1 << kNumAlignBits) -+ -+#define kMatchMinLen 2 -+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols) -+ -+#define IsMatch 0 -+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -+#define IsRepG0 (IsRep + kNumStates) -+#define IsRepG1 (IsRepG0 + kNumStates) -+#define IsRepG2 (IsRepG1 + kNumStates) -+#define IsRep0Long (IsRepG2 + kNumStates) -+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -+#define LenCoder (Align + kAlignTableSize) -+#define RepLenCoder (LenCoder + kNumLenProbs) -+#define Literal (RepLenCoder + kNumLenProbs) -+ -+#define LZMA_BASE_SIZE 1846 -+#define LZMA_LIT_SIZE 768 -+ -+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp))) -+ -+#if Literal != LZMA_BASE_SIZE -+StopCompilingDueBUG -+#endif -+ -+#define LZMA_DIC_MIN (1 << 12) -+ -+/* First LZMA-symbol is always decoded. -+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization -+Out: -+ Result: -+ SZ_OK - OK -+ SZ_ERROR_DATA - Error -+ p->remainLen: -+ < kMatchSpecLenStart : normal remain -+ = kMatchSpecLenStart : finished -+ = kMatchSpecLenStart + 1 : Flush marker -+ = kMatchSpecLenStart + 2 : State Init Marker -+*/ -+ -+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit) -+{ -+ CLzmaProb *probs = p->probs; -+ -+ unsigned state = p->state; -+ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3]; -+ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1; -+ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1; -+ unsigned lc = p->prop.lc; -+ -+ Byte *dic = p->dic; -+ SizeT dicBufSize = p->dicBufSize; -+ SizeT dicPos = p->dicPos; -+ -+ UInt32 processedPos = p->processedPos; -+ UInt32 checkDicSize = p->checkDicSize; -+ unsigned len = 0; -+ -+ const Byte *buf = p->buf; -+ UInt32 range = p->range; -+ UInt32 code = p->code; -+ -+ do -+ { -+ CLzmaProb *prob; -+ UInt32 bound; -+ unsigned ttt; -+ unsigned posState = processedPos & pbMask; -+ -+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0(prob) -+ { -+ unsigned symbol; -+ UPDATE_0(prob); -+ prob = probs + Literal; -+ if (checkDicSize != 0 || processedPos != 0) -+ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) + -+ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc)))); -+ -+ if (state < kNumLitStates) -+ { -+ state -= (state < 4) ? state : 3; -+ symbol = 1; -+ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100); -+ } -+ else -+ { -+ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; -+ unsigned offs = 0x100; -+ state -= (state < 10) ? 3 : 6; -+ symbol = 1; -+ do -+ { -+ unsigned bit; -+ CLzmaProb *probLit; -+ matchByte <<= 1; -+ bit = (matchByte & offs); -+ probLit = prob + offs + bit + symbol; -+ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit) -+ } -+ while (symbol < 0x100); -+ } -+ dic[dicPos++] = (Byte)symbol; -+ processedPos++; -+ continue; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ prob = probs + IsRep + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ state += kNumStates; -+ prob = probs + LenCoder; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ if (checkDicSize == 0 && processedPos == 0) -+ return SZ_ERROR_DATA; -+ prob = probs + IsRepG0 + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; -+ dicPos++; -+ processedPos++; -+ state = state < kNumLitStates ? 9 : 11; -+ continue; -+ } -+ UPDATE_1(prob); -+ } -+ else -+ { -+ UInt32 distance; -+ UPDATE_1(prob); -+ prob = probs + IsRepG1 + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ distance = rep1; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ prob = probs + IsRepG2 + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ distance = rep2; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ distance = rep3; -+ rep3 = rep2; -+ } -+ rep2 = rep1; -+ } -+ rep1 = rep0; -+ rep0 = distance; -+ } -+ state = state < kNumLitStates ? 8 : 11; -+ prob = probs + RepLenCoder; -+ } -+ { -+ unsigned limit, offset; -+ CLzmaProb *probLen = prob + LenChoice; -+ IF_BIT_0(probLen) -+ { -+ UPDATE_0(probLen); -+ probLen = prob + LenLow + (posState << kLenNumLowBits); -+ offset = 0; -+ limit = (1 << kLenNumLowBits); -+ } -+ else -+ { -+ UPDATE_1(probLen); -+ probLen = prob + LenChoice2; -+ IF_BIT_0(probLen) -+ { -+ UPDATE_0(probLen); -+ probLen = prob + LenMid + (posState << kLenNumMidBits); -+ offset = kLenNumLowSymbols; -+ limit = (1 << kLenNumMidBits); -+ } -+ else -+ { -+ UPDATE_1(probLen); -+ probLen = prob + LenHigh; -+ offset = kLenNumLowSymbols + kLenNumMidSymbols; -+ limit = (1 << kLenNumHighBits); -+ } -+ } -+ TREE_DECODE(probLen, limit, len); -+ len += offset; -+ } -+ -+ if (state >= kNumStates) -+ { -+ UInt32 distance; -+ prob = probs + PosSlot + -+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits); -+ TREE_6_DECODE(prob, distance); -+ if (distance >= kStartPosModelIndex) -+ { -+ unsigned posSlot = (unsigned)distance; -+ int numDirectBits = (int)(((distance >> 1) - 1)); -+ distance = (2 | (distance & 1)); -+ if (posSlot < kEndPosModelIndex) -+ { -+ distance <<= numDirectBits; -+ prob = probs + SpecPos + distance - posSlot - 1; -+ { -+ UInt32 mask = 1; -+ unsigned i = 1; -+ do -+ { -+ GET_BIT2(prob + i, i, ; , distance |= mask); -+ mask <<= 1; -+ } -+ while (--numDirectBits != 0); -+ } -+ } -+ else -+ { -+ numDirectBits -= kNumAlignBits; -+ do -+ { -+ NORMALIZE -+ range >>= 1; -+ -+ { -+ UInt32 t; -+ code -= range; -+ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */ -+ distance = (distance << 1) + (t + 1); -+ code += range & t; -+ } -+ /* -+ distance <<= 1; -+ if (code >= range) -+ { -+ code -= range; -+ distance |= 1; -+ } -+ */ -+ } -+ while (--numDirectBits != 0); -+ prob = probs + Align; -+ distance <<= kNumAlignBits; -+ { -+ unsigned i = 1; -+ GET_BIT2(prob + i, i, ; , distance |= 1); -+ GET_BIT2(prob + i, i, ; , distance |= 2); -+ GET_BIT2(prob + i, i, ; , distance |= 4); -+ GET_BIT2(prob + i, i, ; , distance |= 8); -+ } -+ if (distance == (UInt32)0xFFFFFFFF) -+ { -+ len += kMatchSpecLenStart; -+ state -= kNumStates; -+ break; -+ } -+ } -+ } -+ rep3 = rep2; -+ rep2 = rep1; -+ rep1 = rep0; -+ rep0 = distance + 1; -+ if (checkDicSize == 0) -+ { -+ if (distance >= processedPos) -+ return SZ_ERROR_DATA; -+ } -+ else if (distance >= checkDicSize) -+ return SZ_ERROR_DATA; -+ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3; -+ } -+ -+ len += kMatchMinLen; -+ -+ if (limit == dicPos) -+ return SZ_ERROR_DATA; -+ { -+ SizeT rem = limit - dicPos; -+ unsigned curLen = ((rem < len) ? (unsigned)rem : len); -+ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0); -+ -+ processedPos += curLen; -+ -+ len -= curLen; -+ if (pos + curLen <= dicBufSize) -+ { -+ Byte *dest = dic + dicPos; -+ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos; -+ const Byte *lim = dest + curLen; -+ dicPos += curLen; -+ do -+ *(dest) = (Byte)*(dest + src); -+ while (++dest != lim); -+ } -+ else -+ { -+ do -+ { -+ dic[dicPos++] = dic[pos]; -+ if (++pos == dicBufSize) -+ pos = 0; -+ } -+ while (--curLen != 0); -+ } -+ } -+ } -+ } -+ while (dicPos < limit && buf < bufLimit); -+ NORMALIZE; -+ p->buf = buf; -+ p->range = range; -+ p->code = code; -+ p->remainLen = len; -+ p->dicPos = dicPos; -+ p->processedPos = processedPos; -+ p->reps[0] = rep0; -+ p->reps[1] = rep1; -+ p->reps[2] = rep2; -+ p->reps[3] = rep3; -+ p->state = state; -+ -+ return SZ_OK; -+} -+ -+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit) -+{ -+ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart) -+ { -+ Byte *dic = p->dic; -+ SizeT dicPos = p->dicPos; -+ SizeT dicBufSize = p->dicBufSize; -+ unsigned len = p->remainLen; -+ UInt32 rep0 = p->reps[0]; -+ if (limit - dicPos < len) -+ len = (unsigned)(limit - dicPos); -+ -+ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len) -+ p->checkDicSize = p->prop.dicSize; -+ -+ p->processedPos += len; -+ p->remainLen -= len; -+ while (len-- != 0) -+ { -+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; -+ dicPos++; -+ } -+ p->dicPos = dicPos; -+ } -+} -+ -+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit) -+{ -+ do -+ { -+ SizeT limit2 = limit; -+ if (p->checkDicSize == 0) -+ { -+ UInt32 rem = p->prop.dicSize - p->processedPos; -+ if (limit - p->dicPos > rem) -+ limit2 = p->dicPos + rem; -+ } -+ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit)); -+ if (p->processedPos >= p->prop.dicSize) -+ p->checkDicSize = p->prop.dicSize; -+ LzmaDec_WriteRem(p, limit); -+ } -+ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart); -+ -+ if (p->remainLen > kMatchSpecLenStart) -+ { -+ p->remainLen = kMatchSpecLenStart; -+ } -+ return 0; -+} -+ -+typedef enum -+{ -+ DUMMY_ERROR, /* unexpected end of input stream */ -+ DUMMY_LIT, -+ DUMMY_MATCH, -+ DUMMY_REP -+} ELzmaDummy; -+ -+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize) -+{ -+ UInt32 range = p->range; -+ UInt32 code = p->code; -+ const Byte *bufLimit = buf + inSize; -+ CLzmaProb *probs = p->probs; -+ unsigned state = p->state; -+ ELzmaDummy res; -+ -+ { -+ CLzmaProb *prob; -+ UInt32 bound; -+ unsigned ttt; -+ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1); -+ -+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK -+ -+ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */ -+ -+ prob = probs + Literal; -+ if (p->checkDicSize != 0 || p->processedPos != 0) -+ prob += (LZMA_LIT_SIZE * -+ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) + -+ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc)))); -+ -+ if (state < kNumLitStates) -+ { -+ unsigned symbol = 1; -+ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100); -+ } -+ else -+ { -+ unsigned matchByte = p->dic[p->dicPos - p->reps[0] + -+ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)]; -+ unsigned offs = 0x100; -+ unsigned symbol = 1; -+ do -+ { -+ unsigned bit; -+ CLzmaProb *probLit; -+ matchByte <<= 1; -+ bit = (matchByte & offs); -+ probLit = prob + offs + bit + symbol; -+ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit) -+ } -+ while (symbol < 0x100); -+ } -+ res = DUMMY_LIT; -+ } -+ else -+ { -+ unsigned len; -+ UPDATE_1_CHECK; -+ -+ prob = probs + IsRep + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ state = 0; -+ prob = probs + LenCoder; -+ res = DUMMY_MATCH; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ res = DUMMY_REP; -+ prob = probs + IsRepG0 + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ NORMALIZE_CHECK; -+ return DUMMY_REP; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ } -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ prob = probs + IsRepG1 + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ prob = probs + IsRepG2 + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ } -+ } -+ } -+ state = kNumStates; -+ prob = probs + RepLenCoder; -+ } -+ { -+ unsigned limit, offset; -+ CLzmaProb *probLen = prob + LenChoice; -+ IF_BIT_0_CHECK(probLen) -+ { -+ UPDATE_0_CHECK; -+ probLen = prob + LenLow + (posState << kLenNumLowBits); -+ offset = 0; -+ limit = 1 << kLenNumLowBits; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ probLen = prob + LenChoice2; -+ IF_BIT_0_CHECK(probLen) -+ { -+ UPDATE_0_CHECK; -+ probLen = prob + LenMid + (posState << kLenNumMidBits); -+ offset = kLenNumLowSymbols; -+ limit = 1 << kLenNumMidBits; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ probLen = prob + LenHigh; -+ offset = kLenNumLowSymbols + kLenNumMidSymbols; -+ limit = 1 << kLenNumHighBits; -+ } -+ } -+ TREE_DECODE_CHECK(probLen, limit, len); -+ len += offset; -+ } -+ -+ if (state < 4) -+ { -+ unsigned posSlot; -+ prob = probs + PosSlot + -+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << -+ kNumPosSlotBits); -+ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot); -+ if (posSlot >= kStartPosModelIndex) -+ { -+ int numDirectBits = ((posSlot >> 1) - 1); -+ -+ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */ -+ -+ if (posSlot < kEndPosModelIndex) -+ { -+ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1; -+ } -+ else -+ { -+ numDirectBits -= kNumAlignBits; -+ do -+ { -+ NORMALIZE_CHECK -+ range >>= 1; -+ code -= range & (((code - range) >> 31) - 1); -+ /* if (code >= range) code -= range; */ -+ } -+ while (--numDirectBits != 0); -+ prob = probs + Align; -+ numDirectBits = kNumAlignBits; -+ } -+ { -+ unsigned i = 1; -+ do -+ { -+ GET_BIT_CHECK(prob + i, i); -+ } -+ while (--numDirectBits != 0); -+ } -+ } -+ } -+ } -+ } -+ NORMALIZE_CHECK; -+ return res; -+} -+ -+ -+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data) -+{ -+ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]); -+ p->range = 0xFFFFFFFF; -+ p->needFlush = 0; -+} -+ -+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) -+{ -+ p->needFlush = 1; -+ p->remainLen = 0; -+ p->tempBufSize = 0; -+ -+ if (initDic) -+ { -+ p->processedPos = 0; -+ p->checkDicSize = 0; -+ p->needInitState = 1; -+ } -+ if (initState) -+ p->needInitState = 1; -+} -+ -+void LzmaDec_Init(CLzmaDec *p) -+{ -+ p->dicPos = 0; -+ LzmaDec_InitDicAndState(p, True, True); -+} -+ -+static void LzmaDec_InitStateReal(CLzmaDec *p) -+{ -+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp)); -+ UInt32 i; -+ CLzmaProb *probs = p->probs; -+ for (i = 0; i < numProbs; i++) -+ probs[i] = kBitModelTotal >> 1; -+ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1; -+ p->state = 0; -+ p->needInitState = 0; -+} -+ -+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, -+ ELzmaFinishMode finishMode, ELzmaStatus *status) -+{ -+ SizeT inSize = *srcLen; -+ (*srcLen) = 0; -+ LzmaDec_WriteRem(p, dicLimit); -+ -+ *status = LZMA_STATUS_NOT_SPECIFIED; -+ -+ while (p->remainLen != kMatchSpecLenStart) -+ { -+ int checkEndMarkNow; -+ -+ if (p->needFlush != 0) -+ { -+ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--) -+ p->tempBuf[p->tempBufSize++] = *src++; -+ if (p->tempBufSize < RC_INIT_SIZE) -+ { -+ *status = LZMA_STATUS_NEEDS_MORE_INPUT; -+ return SZ_OK; -+ } -+ if (p->tempBuf[0] != 0) -+ return SZ_ERROR_DATA; -+ -+ LzmaDec_InitRc(p, p->tempBuf); -+ p->tempBufSize = 0; -+ } -+ -+ checkEndMarkNow = 0; -+ if (p->dicPos >= dicLimit) -+ { -+ if (p->remainLen == 0 && p->code == 0) -+ { -+ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK; -+ return SZ_OK; -+ } -+ if (finishMode == LZMA_FINISH_ANY) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_OK; -+ } -+ if (p->remainLen != 0) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_ERROR_DATA; -+ } -+ checkEndMarkNow = 1; -+ } -+ -+ if (p->needInitState) -+ LzmaDec_InitStateReal(p); -+ -+ if (p->tempBufSize == 0) -+ { -+ SizeT processed; -+ const Byte *bufLimit; -+ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) -+ { -+ int dummyRes = LzmaDec_TryDummy(p, src, inSize); -+ if (dummyRes == DUMMY_ERROR) -+ { -+ memcpy(p->tempBuf, src, inSize); -+ p->tempBufSize = (unsigned)inSize; -+ (*srcLen) += inSize; -+ *status = LZMA_STATUS_NEEDS_MORE_INPUT; -+ return SZ_OK; -+ } -+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_ERROR_DATA; -+ } -+ bufLimit = src; -+ } -+ else -+ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX; -+ p->buf = src; -+ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0) -+ return SZ_ERROR_DATA; -+ processed = (SizeT)(p->buf - src); -+ (*srcLen) += processed; -+ src += processed; -+ inSize -= processed; -+ } -+ else -+ { -+ unsigned rem = p->tempBufSize, lookAhead = 0; -+ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize) -+ p->tempBuf[rem++] = src[lookAhead++]; -+ p->tempBufSize = rem; -+ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) -+ { -+ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem); -+ if (dummyRes == DUMMY_ERROR) -+ { -+ (*srcLen) += lookAhead; -+ *status = LZMA_STATUS_NEEDS_MORE_INPUT; -+ return SZ_OK; -+ } -+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_ERROR_DATA; -+ } -+ } -+ p->buf = p->tempBuf; -+ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0) -+ return SZ_ERROR_DATA; -+ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf)); -+ (*srcLen) += lookAhead; -+ src += lookAhead; -+ inSize -= lookAhead; -+ p->tempBufSize = 0; -+ } -+ } -+ if (p->code == 0) -+ *status = LZMA_STATUS_FINISHED_WITH_MARK; -+ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA; -+} -+ -+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) -+{ -+ SizeT outSize = *destLen; -+ SizeT inSize = *srcLen; -+ *srcLen = *destLen = 0; -+ for (;;) -+ { -+ SizeT inSizeCur = inSize, outSizeCur, dicPos; -+ ELzmaFinishMode curFinishMode; -+ SRes res; -+ if (p->dicPos == p->dicBufSize) -+ p->dicPos = 0; -+ dicPos = p->dicPos; -+ if (outSize > p->dicBufSize - dicPos) -+ { -+ outSizeCur = p->dicBufSize; -+ curFinishMode = LZMA_FINISH_ANY; -+ } -+ else -+ { -+ outSizeCur = dicPos + outSize; -+ curFinishMode = finishMode; -+ } -+ -+ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status); -+ src += inSizeCur; -+ inSize -= inSizeCur; -+ *srcLen += inSizeCur; -+ outSizeCur = p->dicPos - dicPos; -+ memcpy(dest, p->dic + dicPos, outSizeCur); -+ dest += outSizeCur; -+ outSize -= outSizeCur; -+ *destLen += outSizeCur; -+ if (res != 0) -+ return res; -+ if (outSizeCur == 0 || outSize == 0) -+ return SZ_OK; -+ } -+} -+ -+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->probs); -+ p->probs = 0; -+} -+ -+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->dic); -+ p->dic = 0; -+} -+ -+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) -+{ -+ LzmaDec_FreeProbs(p, alloc); -+ LzmaDec_FreeDict(p, alloc); -+} -+ -+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) -+{ -+ UInt32 dicSize; -+ Byte d; -+ -+ if (size < LZMA_PROPS_SIZE) -+ return SZ_ERROR_UNSUPPORTED; -+ else -+ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24); -+ -+ if (dicSize < LZMA_DIC_MIN) -+ dicSize = LZMA_DIC_MIN; -+ p->dicSize = dicSize; -+ -+ d = data[0]; -+ if (d >= (9 * 5 * 5)) -+ return SZ_ERROR_UNSUPPORTED; -+ -+ p->lc = d % 9; -+ d /= 9; -+ p->pb = d / 5; -+ p->lp = d % 5; -+ -+ return SZ_OK; -+} -+ -+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc) -+{ -+ UInt32 numProbs = LzmaProps_GetNumProbs(propNew); -+ if (p->probs == 0 || numProbs != p->numProbs) -+ { -+ LzmaDec_FreeProbs(p, alloc); -+ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb)); -+ p->numProbs = numProbs; -+ if (p->probs == 0) -+ return SZ_ERROR_MEM; -+ } -+ return SZ_OK; -+} -+ -+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) -+{ -+ CLzmaProps propNew; -+ RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); -+ p->prop = propNew; -+ return SZ_OK; -+} -+ -+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) -+{ -+ CLzmaProps propNew; -+ SizeT dicBufSize; -+ RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); -+ dicBufSize = propNew.dicSize; -+ if (p->dic == 0 || dicBufSize != p->dicBufSize) -+ { -+ LzmaDec_FreeDict(p, alloc); -+ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize); -+ if (p->dic == 0) -+ { -+ LzmaDec_FreeProbs(p, alloc); -+ return SZ_ERROR_MEM; -+ } -+ } -+ p->dicBufSize = dicBufSize; -+ p->prop = propNew; -+ return SZ_OK; -+} -+ -+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, -+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, -+ ELzmaStatus *status, ISzAlloc *alloc) -+{ -+ CLzmaDec p; -+ SRes res; -+ SizeT inSize = *srcLen; -+ SizeT outSize = *destLen; -+ *srcLen = *destLen = 0; -+ if (inSize < RC_INIT_SIZE) -+ return SZ_ERROR_INPUT_EOF; -+ -+ LzmaDec_Construct(&p); -+ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc); -+ if (res != 0) -+ return res; -+ p.dic = dest; -+ p.dicBufSize = outSize; -+ -+ LzmaDec_Init(&p); -+ -+ *srcLen = inSize; -+ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status); -+ -+ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT) -+ res = SZ_ERROR_INPUT_EOF; -+ -+ (*destLen) = p.dicPos; -+ LzmaDec_FreeProbs(&p, alloc); -+ return res; -+} ---- /dev/null -+++ b/lib/lzma/LzmaEnc.c -@@ -0,0 +1,2271 @@ -+/* LzmaEnc.c -- LZMA Encoder -+2009-11-24 : Igor Pavlov : Public domain */ -+ -+#include <string.h> -+ -+/* #define SHOW_STAT */ -+/* #define SHOW_STAT2 */ -+ -+#if defined(SHOW_STAT) || defined(SHOW_STAT2) -+#include <stdio.h> -+#endif -+ -+#include "LzmaEnc.h" -+ -+/* disable MT */ -+#define _7ZIP_ST -+ -+#include "LzFind.h" -+#ifndef _7ZIP_ST -+#include "LzFindMt.h" -+#endif -+ -+#ifdef SHOW_STAT -+static int ttt = 0; -+#endif -+ -+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1) -+ -+#define kBlockSize (9 << 10) -+#define kUnpackBlockSize (1 << 18) -+#define kMatchArraySize (1 << 21) -+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX) -+ -+#define kNumMaxDirectBits (31) -+ -+#define kNumTopBits 24 -+#define kTopValue ((UInt32)1 << kNumTopBits) -+ -+#define kNumBitModelTotalBits 11 -+#define kBitModelTotal (1 << kNumBitModelTotalBits) -+#define kNumMoveBits 5 -+#define kProbInitValue (kBitModelTotal >> 1) -+ -+#define kNumMoveReducingBits 4 -+#define kNumBitPriceShiftBits 4 -+#define kBitPrice (1 << kNumBitPriceShiftBits) -+ -+void LzmaEncProps_Init(CLzmaEncProps *p) -+{ -+ p->level = 5; -+ p->dictSize = p->mc = 0; -+ p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1; -+ p->writeEndMark = 0; -+} -+ -+void LzmaEncProps_Normalize(CLzmaEncProps *p) -+{ -+ int level = p->level; -+ if (level < 0) level = 5; -+ p->level = level; -+ if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26))); -+ if (p->lc < 0) p->lc = 3; -+ if (p->lp < 0) p->lp = 0; -+ if (p->pb < 0) p->pb = 2; -+ if (p->algo < 0) p->algo = (level < 5 ? 0 : 1); -+ if (p->fb < 0) p->fb = (level < 7 ? 32 : 64); -+ if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1); -+ if (p->numHashBytes < 0) p->numHashBytes = 4; -+ if (p->mc == 0) p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1); -+ if (p->numThreads < 0) -+ p->numThreads = -+ #ifndef _7ZIP_ST -+ ((p->btMode && p->algo) ? 2 : 1); -+ #else -+ 1; -+ #endif -+} -+ -+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) -+{ -+ CLzmaEncProps props = *props2; -+ LzmaEncProps_Normalize(&props); -+ return props.dictSize; -+} -+ -+/* #define LZMA_LOG_BSR */ -+/* Define it for Intel's CPU */ -+ -+ -+#ifdef LZMA_LOG_BSR -+ -+#define kDicLogSizeMaxCompress 30 -+ -+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); } -+ -+UInt32 GetPosSlot1(UInt32 pos) -+{ -+ UInt32 res; -+ BSR2_RET(pos, res); -+ return res; -+} -+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); } -+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); } -+ -+#else -+ -+#define kNumLogBits (9 + (int)sizeof(size_t) / 2) -+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7) -+ -+void LzmaEnc_FastPosInit(Byte *g_FastPos) -+{ -+ int c = 2, slotFast; -+ g_FastPos[0] = 0; -+ g_FastPos[1] = 1; -+ -+ for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++) -+ { -+ UInt32 k = (1 << ((slotFast >> 1) - 1)); -+ UInt32 j; -+ for (j = 0; j < k; j++, c++) -+ g_FastPos[c] = (Byte)slotFast; -+ } -+} -+ -+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \ -+ (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \ -+ res = p->g_FastPos[pos >> i] + (i * 2); } -+/* -+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \ -+ p->g_FastPos[pos >> 6] + 12 : \ -+ p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; } -+*/ -+ -+#define GetPosSlot1(pos) p->g_FastPos[pos] -+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); } -+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); } -+ -+#endif -+ -+ -+#define LZMA_NUM_REPS 4 -+ -+typedef unsigned CState; -+ -+typedef struct -+{ -+ UInt32 price; -+ -+ CState state; -+ int prev1IsChar; -+ int prev2; -+ -+ UInt32 posPrev2; -+ UInt32 backPrev2; -+ -+ UInt32 posPrev; -+ UInt32 backPrev; -+ UInt32 backs[LZMA_NUM_REPS]; -+} COptimal; -+ -+#define kNumOpts (1 << 12) -+ -+#define kNumLenToPosStates 4 -+#define kNumPosSlotBits 6 -+#define kDicLogSizeMin 0 -+#define kDicLogSizeMax 32 -+#define kDistTableSizeMax (kDicLogSizeMax * 2) -+ -+ -+#define kNumAlignBits 4 -+#define kAlignTableSize (1 << kNumAlignBits) -+#define kAlignMask (kAlignTableSize - 1) -+ -+#define kStartPosModelIndex 4 -+#define kEndPosModelIndex 14 -+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex) -+ -+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) -+ -+#ifdef _LZMA_PROB32 -+#define CLzmaProb UInt32 -+#else -+#define CLzmaProb UInt16 -+#endif -+ -+#define LZMA_PB_MAX 4 -+#define LZMA_LC_MAX 8 -+#define LZMA_LP_MAX 4 -+ -+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX) -+ -+ -+#define kLenNumLowBits 3 -+#define kLenNumLowSymbols (1 << kLenNumLowBits) -+#define kLenNumMidBits 3 -+#define kLenNumMidSymbols (1 << kLenNumMidBits) -+#define kLenNumHighBits 8 -+#define kLenNumHighSymbols (1 << kLenNumHighBits) -+ -+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols) -+ -+#define LZMA_MATCH_LEN_MIN 2 -+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1) -+ -+#define kNumStates 12 -+ -+typedef struct -+{ -+ CLzmaProb choice; -+ CLzmaProb choice2; -+ CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits]; -+ CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits]; -+ CLzmaProb high[kLenNumHighSymbols]; -+} CLenEnc; -+ -+typedef struct -+{ -+ CLenEnc p; -+ UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal]; -+ UInt32 tableSize; -+ UInt32 counters[LZMA_NUM_PB_STATES_MAX]; -+} CLenPriceEnc; -+ -+typedef struct -+{ -+ UInt32 range; -+ Byte cache; -+ UInt64 low; -+ UInt64 cacheSize; -+ Byte *buf; -+ Byte *bufLim; -+ Byte *bufBase; -+ ISeqOutStream *outStream; -+ UInt64 processed; -+ SRes res; -+} CRangeEnc; -+ -+typedef struct -+{ -+ CLzmaProb *litProbs; -+ -+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ CLzmaProb isRep[kNumStates]; -+ CLzmaProb isRepG0[kNumStates]; -+ CLzmaProb isRepG1[kNumStates]; -+ CLzmaProb isRepG2[kNumStates]; -+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ -+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits]; -+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex]; -+ CLzmaProb posAlignEncoder[1 << kNumAlignBits]; -+ -+ CLenPriceEnc lenEnc; -+ CLenPriceEnc repLenEnc; -+ -+ UInt32 reps[LZMA_NUM_REPS]; -+ UInt32 state; -+} CSaveState; -+ -+typedef struct -+{ -+ IMatchFinder matchFinder; -+ void *matchFinderObj; -+ -+ #ifndef _7ZIP_ST -+ Bool mtMode; -+ CMatchFinderMt matchFinderMt; -+ #endif -+ -+ CMatchFinder matchFinderBase; -+ -+ #ifndef _7ZIP_ST -+ Byte pad[128]; -+ #endif -+ -+ UInt32 optimumEndIndex; -+ UInt32 optimumCurrentIndex; -+ -+ UInt32 longestMatchLength; -+ UInt32 numPairs; -+ UInt32 numAvail; -+ COptimal opt[kNumOpts]; -+ -+ #ifndef LZMA_LOG_BSR -+ Byte g_FastPos[1 << kNumLogBits]; -+ #endif -+ -+ UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits]; -+ UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1]; -+ UInt32 numFastBytes; -+ UInt32 additionalOffset; -+ UInt32 reps[LZMA_NUM_REPS]; -+ UInt32 state; -+ -+ UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax]; -+ UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances]; -+ UInt32 alignPrices[kAlignTableSize]; -+ UInt32 alignPriceCount; -+ -+ UInt32 distTableSize; -+ -+ unsigned lc, lp, pb; -+ unsigned lpMask, pbMask; -+ -+ CLzmaProb *litProbs; -+ -+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ CLzmaProb isRep[kNumStates]; -+ CLzmaProb isRepG0[kNumStates]; -+ CLzmaProb isRepG1[kNumStates]; -+ CLzmaProb isRepG2[kNumStates]; -+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ -+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits]; -+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex]; -+ CLzmaProb posAlignEncoder[1 << kNumAlignBits]; -+ -+ CLenPriceEnc lenEnc; -+ CLenPriceEnc repLenEnc; -+ -+ unsigned lclp; -+ -+ Bool fastMode; -+ -+ CRangeEnc rc; -+ -+ Bool writeEndMark; -+ UInt64 nowPos64; -+ UInt32 matchPriceCount; -+ Bool finished; -+ Bool multiThread; -+ -+ SRes result; -+ UInt32 dictSize; -+ UInt32 matchFinderCycles; -+ -+ int needInit; -+ -+ CSaveState saveState; -+} CLzmaEnc; -+ -+void LzmaEnc_SaveState(CLzmaEncHandle pp) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ CSaveState *dest = &p->saveState; -+ int i; -+ dest->lenEnc = p->lenEnc; -+ dest->repLenEnc = p->repLenEnc; -+ dest->state = p->state; -+ -+ for (i = 0; i < kNumStates; i++) -+ { -+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); -+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); -+ } -+ for (i = 0; i < kNumLenToPosStates; i++) -+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); -+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); -+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); -+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); -+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); -+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); -+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); -+ memcpy(dest->reps, p->reps, sizeof(p->reps)); -+ memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb)); -+} -+ -+void LzmaEnc_RestoreState(CLzmaEncHandle pp) -+{ -+ CLzmaEnc *dest = (CLzmaEnc *)pp; -+ const CSaveState *p = &dest->saveState; -+ int i; -+ dest->lenEnc = p->lenEnc; -+ dest->repLenEnc = p->repLenEnc; -+ dest->state = p->state; -+ -+ for (i = 0; i < kNumStates; i++) -+ { -+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); -+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); -+ } -+ for (i = 0; i < kNumLenToPosStates; i++) -+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); -+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); -+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); -+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); -+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); -+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); -+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); -+ memcpy(dest->reps, p->reps, sizeof(p->reps)); -+ memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb)); -+} -+ -+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ CLzmaEncProps props = *props2; -+ LzmaEncProps_Normalize(&props); -+ -+ if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX || -+ props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30)) -+ return SZ_ERROR_PARAM; -+ p->dictSize = props.dictSize; -+ p->matchFinderCycles = props.mc; -+ { -+ unsigned fb = props.fb; -+ if (fb < 5) -+ fb = 5; -+ if (fb > LZMA_MATCH_LEN_MAX) -+ fb = LZMA_MATCH_LEN_MAX; -+ p->numFastBytes = fb; -+ } -+ p->lc = props.lc; -+ p->lp = props.lp; -+ p->pb = props.pb; -+ p->fastMode = (props.algo == 0); -+ p->matchFinderBase.btMode = props.btMode; -+ { -+ UInt32 numHashBytes = 4; -+ if (props.btMode) -+ { -+ if (props.numHashBytes < 2) -+ numHashBytes = 2; -+ else if (props.numHashBytes < 4) -+ numHashBytes = props.numHashBytes; -+ } -+ p->matchFinderBase.numHashBytes = numHashBytes; -+ } -+ -+ p->matchFinderBase.cutValue = props.mc; -+ -+ p->writeEndMark = props.writeEndMark; -+ -+ #ifndef _7ZIP_ST -+ /* -+ if (newMultiThread != _multiThread) -+ { -+ ReleaseMatchFinder(); -+ _multiThread = newMultiThread; -+ } -+ */ -+ p->multiThread = (props.numThreads > 1); -+ #endif -+ -+ return SZ_OK; -+} -+ -+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5}; -+static const int kMatchNextStates[kNumStates] = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10}; -+static const int kRepNextStates[kNumStates] = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11}; -+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11}; -+ -+#define IsCharState(s) ((s) < 7) -+ -+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1) -+ -+#define kInfinityPrice (1 << 30) -+ -+static void RangeEnc_Construct(CRangeEnc *p) -+{ -+ p->outStream = 0; -+ p->bufBase = 0; -+} -+ -+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize) -+ -+#define RC_BUF_SIZE (1 << 16) -+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc) -+{ -+ if (p->bufBase == 0) -+ { -+ p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE); -+ if (p->bufBase == 0) -+ return 0; -+ p->bufLim = p->bufBase + RC_BUF_SIZE; -+ } -+ return 1; -+} -+ -+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->bufBase); -+ p->bufBase = 0; -+} -+ -+static void RangeEnc_Init(CRangeEnc *p) -+{ -+ /* Stream.Init(); */ -+ p->low = 0; -+ p->range = 0xFFFFFFFF; -+ p->cacheSize = 1; -+ p->cache = 0; -+ -+ p->buf = p->bufBase; -+ -+ p->processed = 0; -+ p->res = SZ_OK; -+} -+ -+static void RangeEnc_FlushStream(CRangeEnc *p) -+{ -+ size_t num; -+ if (p->res != SZ_OK) -+ return; -+ num = p->buf - p->bufBase; -+ if (num != p->outStream->Write(p->outStream, p->bufBase, num)) -+ p->res = SZ_ERROR_WRITE; -+ p->processed += num; -+ p->buf = p->bufBase; -+} -+ -+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p) -+{ -+ if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0) -+ { -+ Byte temp = p->cache; -+ do -+ { -+ Byte *buf = p->buf; -+ *buf++ = (Byte)(temp + (Byte)(p->low >> 32)); -+ p->buf = buf; -+ if (buf == p->bufLim) -+ RangeEnc_FlushStream(p); -+ temp = 0xFF; -+ } -+ while (--p->cacheSize != 0); -+ p->cache = (Byte)((UInt32)p->low >> 24); -+ } -+ p->cacheSize++; -+ p->low = (UInt32)p->low << 8; -+} -+ -+static void RangeEnc_FlushData(CRangeEnc *p) -+{ -+ int i; -+ for (i = 0; i < 5; i++) -+ RangeEnc_ShiftLow(p); -+} -+ -+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits) -+{ -+ do -+ { -+ p->range >>= 1; -+ p->low += p->range & (0 - ((value >> --numBits) & 1)); -+ if (p->range < kTopValue) -+ { -+ p->range <<= 8; -+ RangeEnc_ShiftLow(p); -+ } -+ } -+ while (numBits != 0); -+} -+ -+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol) -+{ -+ UInt32 ttt = *prob; -+ UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt; -+ if (symbol == 0) -+ { -+ p->range = newBound; -+ ttt += (kBitModelTotal - ttt) >> kNumMoveBits; -+ } -+ else -+ { -+ p->low += newBound; -+ p->range -= newBound; -+ ttt -= ttt >> kNumMoveBits; -+ } -+ *prob = (CLzmaProb)ttt; -+ if (p->range < kTopValue) -+ { -+ p->range <<= 8; -+ RangeEnc_ShiftLow(p); -+ } -+} -+ -+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol) -+{ -+ symbol |= 0x100; -+ do -+ { -+ RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1); -+ symbol <<= 1; -+ } -+ while (symbol < 0x10000); -+} -+ -+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte) -+{ -+ UInt32 offs = 0x100; -+ symbol |= 0x100; -+ do -+ { -+ matchByte <<= 1; -+ RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1); -+ symbol <<= 1; -+ offs &= ~(matchByte ^ symbol); -+ } -+ while (symbol < 0x10000); -+} -+ -+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) -+{ -+ UInt32 i; -+ for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits)) -+ { -+ const int kCyclesBits = kNumBitPriceShiftBits; -+ UInt32 w = i; -+ UInt32 bitCount = 0; -+ int j; -+ for (j = 0; j < kCyclesBits; j++) -+ { -+ w = w * w; -+ bitCount <<= 1; -+ while (w >= ((UInt32)1 << 16)) -+ { -+ w >>= 1; -+ bitCount++; -+ } -+ } -+ ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount); -+ } -+} -+ -+ -+#define GET_PRICE(prob, symbol) \ -+ p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits]; -+ -+#define GET_PRICEa(prob, symbol) \ -+ ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits]; -+ -+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits] -+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits] -+ -+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits] -+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits] -+ -+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ symbol |= 0x100; -+ do -+ { -+ price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1); -+ symbol <<= 1; -+ } -+ while (symbol < 0x10000); -+ return price; -+} -+ -+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ UInt32 offs = 0x100; -+ symbol |= 0x100; -+ do -+ { -+ matchByte <<= 1; -+ price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1); -+ symbol <<= 1; -+ offs &= ~(matchByte ^ symbol); -+ } -+ while (symbol < 0x10000); -+ return price; -+} -+ -+ -+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol) -+{ -+ UInt32 m = 1; -+ int i; -+ for (i = numBitLevels; i != 0;) -+ { -+ UInt32 bit; -+ i--; -+ bit = (symbol >> i) & 1; -+ RangeEnc_EncodeBit(rc, probs + m, bit); -+ m = (m << 1) | bit; -+ } -+} -+ -+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol) -+{ -+ UInt32 m = 1; -+ int i; -+ for (i = 0; i < numBitLevels; i++) -+ { -+ UInt32 bit = symbol & 1; -+ RangeEnc_EncodeBit(rc, probs + m, bit); -+ m = (m << 1) | bit; -+ symbol >>= 1; -+ } -+} -+ -+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ symbol |= (1 << numBitLevels); -+ while (symbol != 1) -+ { -+ price += GET_PRICEa(probs[symbol >> 1], symbol & 1); -+ symbol >>= 1; -+ } -+ return price; -+} -+ -+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ UInt32 m = 1; -+ int i; -+ for (i = numBitLevels; i != 0; i--) -+ { -+ UInt32 bit = symbol & 1; -+ symbol >>= 1; -+ price += GET_PRICEa(probs[m], bit); -+ m = (m << 1) | bit; -+ } -+ return price; -+} -+ -+ -+static void LenEnc_Init(CLenEnc *p) -+{ -+ unsigned i; -+ p->choice = p->choice2 = kProbInitValue; -+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++) -+ p->low[i] = kProbInitValue; -+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++) -+ p->mid[i] = kProbInitValue; -+ for (i = 0; i < kLenNumHighSymbols; i++) -+ p->high[i] = kProbInitValue; -+} -+ -+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState) -+{ -+ if (symbol < kLenNumLowSymbols) -+ { -+ RangeEnc_EncodeBit(rc, &p->choice, 0); -+ RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol); -+ } -+ else -+ { -+ RangeEnc_EncodeBit(rc, &p->choice, 1); -+ if (symbol < kLenNumLowSymbols + kLenNumMidSymbols) -+ { -+ RangeEnc_EncodeBit(rc, &p->choice2, 0); -+ RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols); -+ } -+ else -+ { -+ RangeEnc_EncodeBit(rc, &p->choice2, 1); -+ RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols); -+ } -+ } -+} -+ -+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices) -+{ -+ UInt32 a0 = GET_PRICE_0a(p->choice); -+ UInt32 a1 = GET_PRICE_1a(p->choice); -+ UInt32 b0 = a1 + GET_PRICE_0a(p->choice2); -+ UInt32 b1 = a1 + GET_PRICE_1a(p->choice2); -+ UInt32 i = 0; -+ for (i = 0; i < kLenNumLowSymbols; i++) -+ { -+ if (i >= numSymbols) -+ return; -+ prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices); -+ } -+ for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++) -+ { -+ if (i >= numSymbols) -+ return; -+ prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices); -+ } -+ for (; i < numSymbols; i++) -+ prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices); -+} -+ -+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices) -+{ -+ LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices); -+ p->counters[posState] = p->tableSize; -+} -+ -+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices) -+{ -+ UInt32 posState; -+ for (posState = 0; posState < numPosStates; posState++) -+ LenPriceEnc_UpdateTable(p, posState, ProbPrices); -+} -+ -+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices) -+{ -+ LenEnc_Encode(&p->p, rc, symbol, posState); -+ if (updatePrice) -+ if (--p->counters[posState] == 0) -+ LenPriceEnc_UpdateTable(p, posState, ProbPrices); -+} -+ -+ -+ -+ -+static void MovePos(CLzmaEnc *p, UInt32 num) -+{ -+ #ifdef SHOW_STAT -+ ttt += num; -+ printf("\n MovePos %d", num); -+ #endif -+ if (num != 0) -+ { -+ p->additionalOffset += num; -+ p->matchFinder.Skip(p->matchFinderObj, num); -+ } -+} -+ -+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes) -+{ -+ UInt32 lenRes = 0, numPairs; -+ p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); -+ numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches); -+ #ifdef SHOW_STAT -+ printf("\n i = %d numPairs = %d ", ttt, numPairs / 2); -+ ttt++; -+ { -+ UInt32 i; -+ for (i = 0; i < numPairs; i += 2) -+ printf("%2d %6d | ", p->matches[i], p->matches[i + 1]); -+ } -+ #endif -+ if (numPairs > 0) -+ { -+ lenRes = p->matches[numPairs - 2]; -+ if (lenRes == p->numFastBytes) -+ { -+ const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ UInt32 distance = p->matches[numPairs - 1] + 1; -+ UInt32 numAvail = p->numAvail; -+ if (numAvail > LZMA_MATCH_LEN_MAX) -+ numAvail = LZMA_MATCH_LEN_MAX; -+ { -+ const Byte *pby2 = pby - distance; -+ for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++); -+ } -+ } -+ } -+ p->additionalOffset++; -+ *numDistancePairsRes = numPairs; -+ return lenRes; -+} -+ -+ -+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False; -+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False; -+#define IsShortRep(p) ((p)->backPrev == 0) -+ -+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState) -+{ -+ return -+ GET_PRICE_0(p->isRepG0[state]) + -+ GET_PRICE_0(p->isRep0Long[state][posState]); -+} -+ -+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState) -+{ -+ UInt32 price; -+ if (repIndex == 0) -+ { -+ price = GET_PRICE_0(p->isRepG0[state]); -+ price += GET_PRICE_1(p->isRep0Long[state][posState]); -+ } -+ else -+ { -+ price = GET_PRICE_1(p->isRepG0[state]); -+ if (repIndex == 1) -+ price += GET_PRICE_0(p->isRepG1[state]); -+ else -+ { -+ price += GET_PRICE_1(p->isRepG1[state]); -+ price += GET_PRICE(p->isRepG2[state], repIndex - 2); -+ } -+ } -+ return price; -+} -+ -+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState) -+{ -+ return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] + -+ GetPureRepPrice(p, repIndex, state, posState); -+} -+ -+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur) -+{ -+ UInt32 posMem = p->opt[cur].posPrev; -+ UInt32 backMem = p->opt[cur].backPrev; -+ p->optimumEndIndex = cur; -+ do -+ { -+ if (p->opt[cur].prev1IsChar) -+ { -+ MakeAsChar(&p->opt[posMem]) -+ p->opt[posMem].posPrev = posMem - 1; -+ if (p->opt[cur].prev2) -+ { -+ p->opt[posMem - 1].prev1IsChar = False; -+ p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2; -+ p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2; -+ } -+ } -+ { -+ UInt32 posPrev = posMem; -+ UInt32 backCur = backMem; -+ -+ backMem = p->opt[posPrev].backPrev; -+ posMem = p->opt[posPrev].posPrev; -+ -+ p->opt[posPrev].backPrev = backCur; -+ p->opt[posPrev].posPrev = cur; -+ cur = posPrev; -+ } -+ } -+ while (cur != 0); -+ *backRes = p->opt[0].backPrev; -+ p->optimumCurrentIndex = p->opt[0].posPrev; -+ return p->optimumCurrentIndex; -+} -+ -+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300) -+ -+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes) -+{ -+ UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur; -+ UInt32 matchPrice, repMatchPrice, normalMatchPrice; -+ UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS]; -+ UInt32 *matches; -+ const Byte *data; -+ Byte curByte, matchByte; -+ if (p->optimumEndIndex != p->optimumCurrentIndex) -+ { -+ const COptimal *opt = &p->opt[p->optimumCurrentIndex]; -+ UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex; -+ *backRes = opt->backPrev; -+ p->optimumCurrentIndex = opt->posPrev; -+ return lenRes; -+ } -+ p->optimumCurrentIndex = p->optimumEndIndex = 0; -+ -+ if (p->additionalOffset == 0) -+ mainLen = ReadMatchDistances(p, &numPairs); -+ else -+ { -+ mainLen = p->longestMatchLength; -+ numPairs = p->numPairs; -+ } -+ -+ numAvail = p->numAvail; -+ if (numAvail < 2) -+ { -+ *backRes = (UInt32)(-1); -+ return 1; -+ } -+ if (numAvail > LZMA_MATCH_LEN_MAX) -+ numAvail = LZMA_MATCH_LEN_MAX; -+ -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ repMaxIndex = 0; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 lenTest; -+ const Byte *data2; -+ reps[i] = p->reps[i]; -+ data2 = data - (reps[i] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ { -+ repLens[i] = 0; -+ continue; -+ } -+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++); -+ repLens[i] = lenTest; -+ if (lenTest > repLens[repMaxIndex]) -+ repMaxIndex = i; -+ } -+ if (repLens[repMaxIndex] >= p->numFastBytes) -+ { -+ UInt32 lenRes; -+ *backRes = repMaxIndex; -+ lenRes = repLens[repMaxIndex]; -+ MovePos(p, lenRes - 1); -+ return lenRes; -+ } -+ -+ matches = p->matches; -+ if (mainLen >= p->numFastBytes) -+ { -+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS; -+ MovePos(p, mainLen - 1); -+ return mainLen; -+ } -+ curByte = *data; -+ matchByte = *(data - (reps[0] + 1)); -+ -+ if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2) -+ { -+ *backRes = (UInt32)-1; -+ return 1; -+ } -+ -+ p->opt[0].state = (CState)p->state; -+ -+ posState = (position & p->pbMask); -+ -+ { -+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1)); -+ p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) + -+ (!IsCharState(p->state) ? -+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) : -+ LitEnc_GetPrice(probs, curByte, p->ProbPrices)); -+ } -+ -+ MakeAsChar(&p->opt[1]); -+ -+ matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]); -+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]); -+ -+ if (matchByte == curByte) -+ { -+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState); -+ if (shortRepPrice < p->opt[1].price) -+ { -+ p->opt[1].price = shortRepPrice; -+ MakeAsShortRep(&p->opt[1]); -+ } -+ } -+ lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]); -+ -+ if (lenEnd < 2) -+ { -+ *backRes = p->opt[1].backPrev; -+ return 1; -+ } -+ -+ p->opt[1].posPrev = 0; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ p->opt[0].backs[i] = reps[i]; -+ -+ len = lenEnd; -+ do -+ p->opt[len--].price = kInfinityPrice; -+ while (len >= 2); -+ -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 repLen = repLens[i]; -+ UInt32 price; -+ if (repLen < 2) -+ continue; -+ price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState); -+ do -+ { -+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2]; -+ COptimal *opt = &p->opt[repLen]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = 0; -+ opt->backPrev = i; -+ opt->prev1IsChar = False; -+ } -+ } -+ while (--repLen >= 2); -+ } -+ -+ normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]); -+ -+ len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2); -+ if (len <= mainLen) -+ { -+ UInt32 offs = 0; -+ while (len > matches[offs]) -+ offs += 2; -+ for (; ; len++) -+ { -+ COptimal *opt; -+ UInt32 distance = matches[offs + 1]; -+ -+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN]; -+ UInt32 lenToPosState = GetLenToPosState(len); -+ if (distance < kNumFullDistances) -+ curAndLenPrice += p->distancesPrices[lenToPosState][distance]; -+ else -+ { -+ UInt32 slot; -+ GetPosSlot2(distance, slot); -+ curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot]; -+ } -+ opt = &p->opt[len]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = 0; -+ opt->backPrev = distance + LZMA_NUM_REPS; -+ opt->prev1IsChar = False; -+ } -+ if (len == matches[offs]) -+ { -+ offs += 2; -+ if (offs == numPairs) -+ break; -+ } -+ } -+ } -+ -+ cur = 0; -+ -+ #ifdef SHOW_STAT2 -+ if (position >= 0) -+ { -+ unsigned i; -+ printf("\n pos = %4X", position); -+ for (i = cur; i <= lenEnd; i++) -+ printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price); -+ } -+ #endif -+ -+ for (;;) -+ { -+ UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen; -+ UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice; -+ Bool nextIsChar; -+ Byte curByte, matchByte; -+ const Byte *data; -+ COptimal *curOpt; -+ COptimal *nextOpt; -+ -+ cur++; -+ if (cur == lenEnd) -+ return Backward(p, backRes, cur); -+ -+ newLen = ReadMatchDistances(p, &numPairs); -+ if (newLen >= p->numFastBytes) -+ { -+ p->numPairs = numPairs; -+ p->longestMatchLength = newLen; -+ return Backward(p, backRes, cur); -+ } -+ position++; -+ curOpt = &p->opt[cur]; -+ posPrev = curOpt->posPrev; -+ if (curOpt->prev1IsChar) -+ { -+ posPrev--; -+ if (curOpt->prev2) -+ { -+ state = p->opt[curOpt->posPrev2].state; -+ if (curOpt->backPrev2 < LZMA_NUM_REPS) -+ state = kRepNextStates[state]; -+ else -+ state = kMatchNextStates[state]; -+ } -+ else -+ state = p->opt[posPrev].state; -+ state = kLiteralNextStates[state]; -+ } -+ else -+ state = p->opt[posPrev].state; -+ if (posPrev == cur - 1) -+ { -+ if (IsShortRep(curOpt)) -+ state = kShortRepNextStates[state]; -+ else -+ state = kLiteralNextStates[state]; -+ } -+ else -+ { -+ UInt32 pos; -+ const COptimal *prevOpt; -+ if (curOpt->prev1IsChar && curOpt->prev2) -+ { -+ posPrev = curOpt->posPrev2; -+ pos = curOpt->backPrev2; -+ state = kRepNextStates[state]; -+ } -+ else -+ { -+ pos = curOpt->backPrev; -+ if (pos < LZMA_NUM_REPS) -+ state = kRepNextStates[state]; -+ else -+ state = kMatchNextStates[state]; -+ } -+ prevOpt = &p->opt[posPrev]; -+ if (pos < LZMA_NUM_REPS) -+ { -+ UInt32 i; -+ reps[0] = prevOpt->backs[pos]; -+ for (i = 1; i <= pos; i++) -+ reps[i] = prevOpt->backs[i - 1]; -+ for (; i < LZMA_NUM_REPS; i++) -+ reps[i] = prevOpt->backs[i]; -+ } -+ else -+ { -+ UInt32 i; -+ reps[0] = (pos - LZMA_NUM_REPS); -+ for (i = 1; i < LZMA_NUM_REPS; i++) -+ reps[i] = prevOpt->backs[i - 1]; -+ } -+ } -+ curOpt->state = (CState)state; -+ -+ curOpt->backs[0] = reps[0]; -+ curOpt->backs[1] = reps[1]; -+ curOpt->backs[2] = reps[2]; -+ curOpt->backs[3] = reps[3]; -+ -+ curPrice = curOpt->price; -+ nextIsChar = False; -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ curByte = *data; -+ matchByte = *(data - (reps[0] + 1)); -+ -+ posState = (position & p->pbMask); -+ -+ curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]); -+ { -+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1)); -+ curAnd1Price += -+ (!IsCharState(state) ? -+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) : -+ LitEnc_GetPrice(probs, curByte, p->ProbPrices)); -+ } -+ -+ nextOpt = &p->opt[cur + 1]; -+ -+ if (curAnd1Price < nextOpt->price) -+ { -+ nextOpt->price = curAnd1Price; -+ nextOpt->posPrev = cur; -+ MakeAsChar(nextOpt); -+ nextIsChar = True; -+ } -+ -+ matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]); -+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]); -+ -+ if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0)) -+ { -+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState); -+ if (shortRepPrice <= nextOpt->price) -+ { -+ nextOpt->price = shortRepPrice; -+ nextOpt->posPrev = cur; -+ MakeAsShortRep(nextOpt); -+ nextIsChar = True; -+ } -+ } -+ numAvailFull = p->numAvail; -+ { -+ UInt32 temp = kNumOpts - 1 - cur; -+ if (temp < numAvailFull) -+ numAvailFull = temp; -+ } -+ -+ if (numAvailFull < 2) -+ continue; -+ numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes); -+ -+ if (!nextIsChar && matchByte != curByte) /* speed optimization */ -+ { -+ /* try Literal + rep0 */ -+ UInt32 temp; -+ UInt32 lenTest2; -+ const Byte *data2 = data - (reps[0] + 1); -+ UInt32 limit = p->numFastBytes + 1; -+ if (limit > numAvailFull) -+ limit = numAvailFull; -+ -+ for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++); -+ lenTest2 = temp - 1; -+ if (lenTest2 >= 2) -+ { -+ UInt32 state2 = kLiteralNextStates[state]; -+ UInt32 posStateNext = (position + 1) & p->pbMask; -+ UInt32 nextRepMatchPrice = curAnd1Price + -+ GET_PRICE_1(p->isMatch[state2][posStateNext]) + -+ GET_PRICE_1(p->isRep[state2]); -+ /* for (; lenTest2 >= 2; lenTest2--) */ -+ { -+ UInt32 curAndLenPrice; -+ COptimal *opt; -+ UInt32 offset = cur + 1 + lenTest2; -+ while (lenEnd < offset) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); -+ opt = &p->opt[offset]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur + 1; -+ opt->backPrev = 0; -+ opt->prev1IsChar = True; -+ opt->prev2 = False; -+ } -+ } -+ } -+ } -+ -+ startLen = 2; /* speed optimization */ -+ { -+ UInt32 repIndex; -+ for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++) -+ { -+ UInt32 lenTest; -+ UInt32 lenTestTemp; -+ UInt32 price; -+ const Byte *data2 = data - (reps[repIndex] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ continue; -+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++); -+ while (lenEnd < cur + lenTest) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ lenTestTemp = lenTest; -+ price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState); -+ do -+ { -+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2]; -+ COptimal *opt = &p->opt[cur + lenTest]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur; -+ opt->backPrev = repIndex; -+ opt->prev1IsChar = False; -+ } -+ } -+ while (--lenTest >= 2); -+ lenTest = lenTestTemp; -+ -+ if (repIndex == 0) -+ startLen = lenTest + 1; -+ -+ /* if (_maxMode) */ -+ { -+ UInt32 lenTest2 = lenTest + 1; -+ UInt32 limit = lenTest2 + p->numFastBytes; -+ UInt32 nextRepMatchPrice; -+ if (limit > numAvailFull) -+ limit = numAvailFull; -+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++); -+ lenTest2 -= lenTest + 1; -+ if (lenTest2 >= 2) -+ { -+ UInt32 state2 = kRepNextStates[state]; -+ UInt32 posStateNext = (position + lenTest) & p->pbMask; -+ UInt32 curAndLenCharPrice = -+ price + p->repLenEnc.prices[posState][lenTest - 2] + -+ GET_PRICE_0(p->isMatch[state2][posStateNext]) + -+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]), -+ data[lenTest], data2[lenTest], p->ProbPrices); -+ state2 = kLiteralNextStates[state2]; -+ posStateNext = (position + lenTest + 1) & p->pbMask; -+ nextRepMatchPrice = curAndLenCharPrice + -+ GET_PRICE_1(p->isMatch[state2][posStateNext]) + -+ GET_PRICE_1(p->isRep[state2]); -+ -+ /* for (; lenTest2 >= 2; lenTest2--) */ -+ { -+ UInt32 curAndLenPrice; -+ COptimal *opt; -+ UInt32 offset = cur + lenTest + 1 + lenTest2; -+ while (lenEnd < offset) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); -+ opt = &p->opt[offset]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur + lenTest + 1; -+ opt->backPrev = 0; -+ opt->prev1IsChar = True; -+ opt->prev2 = True; -+ opt->posPrev2 = cur; -+ opt->backPrev2 = repIndex; -+ } -+ } -+ } -+ } -+ } -+ } -+ /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */ -+ if (newLen > numAvail) -+ { -+ newLen = numAvail; -+ for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2); -+ matches[numPairs] = newLen; -+ numPairs += 2; -+ } -+ if (newLen >= startLen) -+ { -+ UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]); -+ UInt32 offs, curBack, posSlot; -+ UInt32 lenTest; -+ while (lenEnd < cur + newLen) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ -+ offs = 0; -+ while (startLen > matches[offs]) -+ offs += 2; -+ curBack = matches[offs + 1]; -+ GetPosSlot2(curBack, posSlot); -+ for (lenTest = /*2*/ startLen; ; lenTest++) -+ { -+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN]; -+ UInt32 lenToPosState = GetLenToPosState(lenTest); -+ COptimal *opt; -+ if (curBack < kNumFullDistances) -+ curAndLenPrice += p->distancesPrices[lenToPosState][curBack]; -+ else -+ curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask]; -+ -+ opt = &p->opt[cur + lenTest]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur; -+ opt->backPrev = curBack + LZMA_NUM_REPS; -+ opt->prev1IsChar = False; -+ } -+ -+ if (/*_maxMode && */lenTest == matches[offs]) -+ { -+ /* Try Match + Literal + Rep0 */ -+ const Byte *data2 = data - (curBack + 1); -+ UInt32 lenTest2 = lenTest + 1; -+ UInt32 limit = lenTest2 + p->numFastBytes; -+ UInt32 nextRepMatchPrice; -+ if (limit > numAvailFull) -+ limit = numAvailFull; -+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++); -+ lenTest2 -= lenTest + 1; -+ if (lenTest2 >= 2) -+ { -+ UInt32 state2 = kMatchNextStates[state]; -+ UInt32 posStateNext = (position + lenTest) & p->pbMask; -+ UInt32 curAndLenCharPrice = curAndLenPrice + -+ GET_PRICE_0(p->isMatch[state2][posStateNext]) + -+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]), -+ data[lenTest], data2[lenTest], p->ProbPrices); -+ state2 = kLiteralNextStates[state2]; -+ posStateNext = (posStateNext + 1) & p->pbMask; -+ nextRepMatchPrice = curAndLenCharPrice + -+ GET_PRICE_1(p->isMatch[state2][posStateNext]) + -+ GET_PRICE_1(p->isRep[state2]); -+ -+ /* for (; lenTest2 >= 2; lenTest2--) */ -+ { -+ UInt32 offset = cur + lenTest + 1 + lenTest2; -+ UInt32 curAndLenPrice; -+ COptimal *opt; -+ while (lenEnd < offset) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); -+ opt = &p->opt[offset]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur + lenTest + 1; -+ opt->backPrev = 0; -+ opt->prev1IsChar = True; -+ opt->prev2 = True; -+ opt->posPrev2 = cur; -+ opt->backPrev2 = curBack + LZMA_NUM_REPS; -+ } -+ } -+ } -+ offs += 2; -+ if (offs == numPairs) -+ break; -+ curBack = matches[offs + 1]; -+ if (curBack >= kNumFullDistances) -+ GetPosSlot2(curBack, posSlot); -+ } -+ } -+ } -+ } -+} -+ -+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist)) -+ -+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes) -+{ -+ UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i; -+ const Byte *data; -+ const UInt32 *matches; -+ -+ if (p->additionalOffset == 0) -+ mainLen = ReadMatchDistances(p, &numPairs); -+ else -+ { -+ mainLen = p->longestMatchLength; -+ numPairs = p->numPairs; -+ } -+ -+ numAvail = p->numAvail; -+ *backRes = (UInt32)-1; -+ if (numAvail < 2) -+ return 1; -+ if (numAvail > LZMA_MATCH_LEN_MAX) -+ numAvail = LZMA_MATCH_LEN_MAX; -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ -+ repLen = repIndex = 0; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 len; -+ const Byte *data2 = data - (p->reps[i] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ continue; -+ for (len = 2; len < numAvail && data[len] == data2[len]; len++); -+ if (len >= p->numFastBytes) -+ { -+ *backRes = i; -+ MovePos(p, len - 1); -+ return len; -+ } -+ if (len > repLen) -+ { -+ repIndex = i; -+ repLen = len; -+ } -+ } -+ -+ matches = p->matches; -+ if (mainLen >= p->numFastBytes) -+ { -+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS; -+ MovePos(p, mainLen - 1); -+ return mainLen; -+ } -+ -+ mainDist = 0; /* for GCC */ -+ if (mainLen >= 2) -+ { -+ mainDist = matches[numPairs - 1]; -+ while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1) -+ { -+ if (!ChangePair(matches[numPairs - 3], mainDist)) -+ break; -+ numPairs -= 2; -+ mainLen = matches[numPairs - 2]; -+ mainDist = matches[numPairs - 1]; -+ } -+ if (mainLen == 2 && mainDist >= 0x80) -+ mainLen = 1; -+ } -+ -+ if (repLen >= 2 && ( -+ (repLen + 1 >= mainLen) || -+ (repLen + 2 >= mainLen && mainDist >= (1 << 9)) || -+ (repLen + 3 >= mainLen && mainDist >= (1 << 15)))) -+ { -+ *backRes = repIndex; -+ MovePos(p, repLen - 1); -+ return repLen; -+ } -+ -+ if (mainLen < 2 || numAvail <= 2) -+ return 1; -+ -+ p->longestMatchLength = ReadMatchDistances(p, &p->numPairs); -+ if (p->longestMatchLength >= 2) -+ { -+ UInt32 newDistance = matches[p->numPairs - 1]; -+ if ((p->longestMatchLength >= mainLen && newDistance < mainDist) || -+ (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) || -+ (p->longestMatchLength > mainLen + 1) || -+ (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist))) -+ return 1; -+ } -+ -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 len, limit; -+ const Byte *data2 = data - (p->reps[i] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ continue; -+ limit = mainLen - 1; -+ for (len = 2; len < limit && data[len] == data2[len]; len++); -+ if (len >= limit) -+ return 1; -+ } -+ *backRes = mainDist + LZMA_NUM_REPS; -+ MovePos(p, mainLen - 2); -+ return mainLen; -+} -+ -+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState) -+{ -+ UInt32 len; -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1); -+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0); -+ p->state = kMatchNextStates[p->state]; -+ len = LZMA_MATCH_LEN_MIN; -+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); -+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1); -+ RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits); -+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask); -+} -+ -+static SRes CheckErrors(CLzmaEnc *p) -+{ -+ if (p->result != SZ_OK) -+ return p->result; -+ if (p->rc.res != SZ_OK) -+ p->result = SZ_ERROR_WRITE; -+ if (p->matchFinderBase.result != SZ_OK) -+ p->result = SZ_ERROR_READ; -+ if (p->result != SZ_OK) -+ p->finished = True; -+ return p->result; -+} -+ -+static SRes Flush(CLzmaEnc *p, UInt32 nowPos) -+{ -+ /* ReleaseMFStream(); */ -+ p->finished = True; -+ if (p->writeEndMark) -+ WriteEndMarker(p, nowPos & p->pbMask); -+ RangeEnc_FlushData(&p->rc); -+ RangeEnc_FlushStream(&p->rc); -+ return CheckErrors(p); -+} -+ -+static void FillAlignPrices(CLzmaEnc *p) -+{ -+ UInt32 i; -+ for (i = 0; i < kAlignTableSize; i++) -+ p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices); -+ p->alignPriceCount = 0; -+} -+ -+static void FillDistancesPrices(CLzmaEnc *p) -+{ -+ UInt32 tempPrices[kNumFullDistances]; -+ UInt32 i, lenToPosState; -+ for (i = kStartPosModelIndex; i < kNumFullDistances; i++) -+ { -+ UInt32 posSlot = GetPosSlot1(i); -+ UInt32 footerBits = ((posSlot >> 1) - 1); -+ UInt32 base = ((2 | (posSlot & 1)) << footerBits); -+ tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices); -+ } -+ -+ for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++) -+ { -+ UInt32 posSlot; -+ const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState]; -+ UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState]; -+ for (posSlot = 0; posSlot < p->distTableSize; posSlot++) -+ posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices); -+ for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++) -+ posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits); -+ -+ { -+ UInt32 *distancesPrices = p->distancesPrices[lenToPosState]; -+ UInt32 i; -+ for (i = 0; i < kStartPosModelIndex; i++) -+ distancesPrices[i] = posSlotPrices[i]; -+ for (; i < kNumFullDistances; i++) -+ distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i]; -+ } -+ } -+ p->matchPriceCount = 0; -+} -+ -+void LzmaEnc_Construct(CLzmaEnc *p) -+{ -+ RangeEnc_Construct(&p->rc); -+ MatchFinder_Construct(&p->matchFinderBase); -+ #ifndef _7ZIP_ST -+ MatchFinderMt_Construct(&p->matchFinderMt); -+ p->matchFinderMt.MatchFinder = &p->matchFinderBase; -+ #endif -+ -+ { -+ CLzmaEncProps props; -+ LzmaEncProps_Init(&props); -+ LzmaEnc_SetProps(p, &props); -+ } -+ -+ #ifndef LZMA_LOG_BSR -+ LzmaEnc_FastPosInit(p->g_FastPos); -+ #endif -+ -+ LzmaEnc_InitPriceTables(p->ProbPrices); -+ p->litProbs = 0; -+ p->saveState.litProbs = 0; -+} -+ -+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc) -+{ -+ void *p; -+ p = alloc->Alloc(alloc, sizeof(CLzmaEnc)); -+ if (p != 0) -+ LzmaEnc_Construct((CLzmaEnc *)p); -+ return p; -+} -+ -+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->litProbs); -+ alloc->Free(alloc, p->saveState.litProbs); -+ p->litProbs = 0; -+ p->saveState.litProbs = 0; -+} -+ -+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ #ifndef _7ZIP_ST -+ MatchFinderMt_Destruct(&p->matchFinderMt, allocBig); -+ #endif -+ MatchFinder_Free(&p->matchFinderBase, allocBig); -+ LzmaEnc_FreeLits(p, alloc); -+ RangeEnc_Free(&p->rc, alloc); -+} -+ -+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig); -+ alloc->Free(alloc, p); -+} -+ -+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize) -+{ -+ UInt32 nowPos32, startPos32; -+ if (p->needInit) -+ { -+ p->matchFinder.Init(p->matchFinderObj); -+ p->needInit = 0; -+ } -+ -+ if (p->finished) -+ return p->result; -+ RINOK(CheckErrors(p)); -+ -+ nowPos32 = (UInt32)p->nowPos64; -+ startPos32 = nowPos32; -+ -+ if (p->nowPos64 == 0) -+ { -+ UInt32 numPairs; -+ Byte curByte; -+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0) -+ return Flush(p, nowPos32); -+ ReadMatchDistances(p, &numPairs); -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0); -+ p->state = kLiteralNextStates[p->state]; -+ curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset); -+ LitEnc_Encode(&p->rc, p->litProbs, curByte); -+ p->additionalOffset--; -+ nowPos32++; -+ } -+ -+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0) -+ for (;;) -+ { -+ UInt32 pos, len, posState; -+ -+ if (p->fastMode) -+ len = GetOptimumFast(p, &pos); -+ else -+ len = GetOptimum(p, nowPos32, &pos); -+ -+ #ifdef SHOW_STAT2 -+ printf("\n pos = %4X, len = %d pos = %d", nowPos32, len, pos); -+ #endif -+ -+ posState = nowPos32 & p->pbMask; -+ if (len == 1 && pos == (UInt32)-1) -+ { -+ Byte curByte; -+ CLzmaProb *probs; -+ const Byte *data; -+ -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0); -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; -+ curByte = *data; -+ probs = LIT_PROBS(nowPos32, *(data - 1)); -+ if (IsCharState(p->state)) -+ LitEnc_Encode(&p->rc, probs, curByte); -+ else -+ LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1)); -+ p->state = kLiteralNextStates[p->state]; -+ } -+ else -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1); -+ if (pos < LZMA_NUM_REPS) -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1); -+ if (pos == 0) -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0); -+ RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1)); -+ } -+ else -+ { -+ UInt32 distance = p->reps[pos]; -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1); -+ if (pos == 1) -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0); -+ else -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1); -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2); -+ if (pos == 3) -+ p->reps[3] = p->reps[2]; -+ p->reps[2] = p->reps[1]; -+ } -+ p->reps[1] = p->reps[0]; -+ p->reps[0] = distance; -+ } -+ if (len == 1) -+ p->state = kShortRepNextStates[p->state]; -+ else -+ { -+ LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); -+ p->state = kRepNextStates[p->state]; -+ } -+ } -+ else -+ { -+ UInt32 posSlot; -+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0); -+ p->state = kMatchNextStates[p->state]; -+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); -+ pos -= LZMA_NUM_REPS; -+ GetPosSlot(pos, posSlot); -+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot); -+ -+ if (posSlot >= kStartPosModelIndex) -+ { -+ UInt32 footerBits = ((posSlot >> 1) - 1); -+ UInt32 base = ((2 | (posSlot & 1)) << footerBits); -+ UInt32 posReduced = pos - base; -+ -+ if (posSlot < kEndPosModelIndex) -+ RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced); -+ else -+ { -+ RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits); -+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask); -+ p->alignPriceCount++; -+ } -+ } -+ p->reps[3] = p->reps[2]; -+ p->reps[2] = p->reps[1]; -+ p->reps[1] = p->reps[0]; -+ p->reps[0] = pos; -+ p->matchPriceCount++; -+ } -+ } -+ p->additionalOffset -= len; -+ nowPos32 += len; -+ if (p->additionalOffset == 0) -+ { -+ UInt32 processed; -+ if (!p->fastMode) -+ { -+ if (p->matchPriceCount >= (1 << 7)) -+ FillDistancesPrices(p); -+ if (p->alignPriceCount >= kAlignTableSize) -+ FillAlignPrices(p); -+ } -+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0) -+ break; -+ processed = nowPos32 - startPos32; -+ if (useLimits) -+ { -+ if (processed + kNumOpts + 300 >= maxUnpackSize || -+ RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize) -+ break; -+ } -+ else if (processed >= (1 << 15)) -+ { -+ p->nowPos64 += nowPos32 - startPos32; -+ return CheckErrors(p); -+ } -+ } -+ } -+ p->nowPos64 += nowPos32 - startPos32; -+ return Flush(p, nowPos32); -+} -+ -+#define kBigHashDicLimit ((UInt32)1 << 24) -+ -+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ UInt32 beforeSize = kNumOpts; -+ Bool btMode; -+ if (!RangeEnc_Alloc(&p->rc, alloc)) -+ return SZ_ERROR_MEM; -+ btMode = (p->matchFinderBase.btMode != 0); -+ #ifndef _7ZIP_ST -+ p->mtMode = (p->multiThread && !p->fastMode && btMode); -+ #endif -+ -+ { -+ unsigned lclp = p->lc + p->lp; -+ if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp) -+ { -+ LzmaEnc_FreeLits(p, alloc); -+ p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb)); -+ p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb)); -+ if (p->litProbs == 0 || p->saveState.litProbs == 0) -+ { -+ LzmaEnc_FreeLits(p, alloc); -+ return SZ_ERROR_MEM; -+ } -+ p->lclp = lclp; -+ } -+ } -+ -+ p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit); -+ -+ if (beforeSize + p->dictSize < keepWindowSize) -+ beforeSize = keepWindowSize - p->dictSize; -+ -+ #ifndef _7ZIP_ST -+ if (p->mtMode) -+ { -+ RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig)); -+ p->matchFinderObj = &p->matchFinderMt; -+ MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder); -+ } -+ else -+ #endif -+ { -+ if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig)) -+ return SZ_ERROR_MEM; -+ p->matchFinderObj = &p->matchFinderBase; -+ MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder); -+ } -+ return SZ_OK; -+} -+ -+void LzmaEnc_Init(CLzmaEnc *p) -+{ -+ UInt32 i; -+ p->state = 0; -+ for (i = 0 ; i < LZMA_NUM_REPS; i++) -+ p->reps[i] = 0; -+ -+ RangeEnc_Init(&p->rc); -+ -+ -+ for (i = 0; i < kNumStates; i++) -+ { -+ UInt32 j; -+ for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++) -+ { -+ p->isMatch[i][j] = kProbInitValue; -+ p->isRep0Long[i][j] = kProbInitValue; -+ } -+ p->isRep[i] = kProbInitValue; -+ p->isRepG0[i] = kProbInitValue; -+ p->isRepG1[i] = kProbInitValue; -+ p->isRepG2[i] = kProbInitValue; -+ } -+ -+ { -+ UInt32 num = 0x300 << (p->lp + p->lc); -+ for (i = 0; i < num; i++) -+ p->litProbs[i] = kProbInitValue; -+ } -+ -+ { -+ for (i = 0; i < kNumLenToPosStates; i++) -+ { -+ CLzmaProb *probs = p->posSlotEncoder[i]; -+ UInt32 j; -+ for (j = 0; j < (1 << kNumPosSlotBits); j++) -+ probs[j] = kProbInitValue; -+ } -+ } -+ { -+ for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++) -+ p->posEncoders[i] = kProbInitValue; -+ } -+ -+ LenEnc_Init(&p->lenEnc.p); -+ LenEnc_Init(&p->repLenEnc.p); -+ -+ for (i = 0; i < (1 << kNumAlignBits); i++) -+ p->posAlignEncoder[i] = kProbInitValue; -+ -+ p->optimumEndIndex = 0; -+ p->optimumCurrentIndex = 0; -+ p->additionalOffset = 0; -+ -+ p->pbMask = (1 << p->pb) - 1; -+ p->lpMask = (1 << p->lp) - 1; -+} -+ -+void LzmaEnc_InitPrices(CLzmaEnc *p) -+{ -+ if (!p->fastMode) -+ { -+ FillDistancesPrices(p); -+ FillAlignPrices(p); -+ } -+ -+ p->lenEnc.tableSize = -+ p->repLenEnc.tableSize = -+ p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN; -+ LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices); -+ LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices); -+} -+ -+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ UInt32 i; -+ for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++) -+ if (p->dictSize <= ((UInt32)1 << i)) -+ break; -+ p->distTableSize = i * 2; -+ -+ p->finished = False; -+ p->result = SZ_OK; -+ RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig)); -+ LzmaEnc_Init(p); -+ LzmaEnc_InitPrices(p); -+ p->nowPos64 = 0; -+ return SZ_OK; -+} -+ -+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, -+ ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ p->matchFinderBase.stream = inStream; -+ p->needInit = 1; -+ p->rc.outStream = outStream; -+ return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig); -+} -+ -+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp, -+ ISeqInStream *inStream, UInt32 keepWindowSize, -+ ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ p->matchFinderBase.stream = inStream; -+ p->needInit = 1; -+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); -+} -+ -+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen) -+{ -+ p->matchFinderBase.directInput = 1; -+ p->matchFinderBase.bufferBase = (Byte *)src; -+ p->matchFinderBase.directInputRem = srcLen; -+} -+ -+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen, -+ UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ LzmaEnc_SetInputBuf(p, src, srcLen); -+ p->needInit = 1; -+ -+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); -+} -+ -+void LzmaEnc_Finish(CLzmaEncHandle pp) -+{ -+ #ifndef _7ZIP_ST -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ if (p->mtMode) -+ MatchFinderMt_ReleaseStream(&p->matchFinderMt); -+ #else -+ pp = pp; -+ #endif -+} -+ -+typedef struct -+{ -+ ISeqOutStream funcTable; -+ Byte *data; -+ SizeT rem; -+ Bool overflow; -+} CSeqOutStreamBuf; -+ -+static size_t MyWrite(void *pp, const void *data, size_t size) -+{ -+ CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp; -+ if (p->rem < size) -+ { -+ size = p->rem; -+ p->overflow = True; -+ } -+ memcpy(p->data, data, size); -+ p->rem -= size; -+ p->data += size; -+ return size; -+} -+ -+ -+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp) -+{ -+ const CLzmaEnc *p = (CLzmaEnc *)pp; -+ return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); -+} -+ -+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp) -+{ -+ const CLzmaEnc *p = (CLzmaEnc *)pp; -+ return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; -+} -+ -+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit, -+ Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ UInt64 nowPos64; -+ SRes res; -+ CSeqOutStreamBuf outStream; -+ -+ outStream.funcTable.Write = MyWrite; -+ outStream.data = dest; -+ outStream.rem = *destLen; -+ outStream.overflow = False; -+ -+ p->writeEndMark = False; -+ p->finished = False; -+ p->result = SZ_OK; -+ -+ if (reInit) -+ LzmaEnc_Init(p); -+ LzmaEnc_InitPrices(p); -+ nowPos64 = p->nowPos64; -+ RangeEnc_Init(&p->rc); -+ p->rc.outStream = &outStream.funcTable; -+ -+ res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize); -+ -+ *unpackSize = (UInt32)(p->nowPos64 - nowPos64); -+ *destLen -= outStream.rem; -+ if (outStream.overflow) -+ return SZ_ERROR_OUTPUT_EOF; -+ -+ return res; -+} -+ -+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress) -+{ -+ SRes res = SZ_OK; -+ -+ #ifndef _7ZIP_ST -+ Byte allocaDummy[0x300]; -+ int i = 0; -+ for (i = 0; i < 16; i++) -+ allocaDummy[i] = (Byte)i; -+ #endif -+ -+ for (;;) -+ { -+ res = LzmaEnc_CodeOneBlock(p, False, 0, 0); -+ if (res != SZ_OK || p->finished != 0) -+ break; -+ if (progress != 0) -+ { -+ res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc)); -+ if (res != SZ_OK) -+ { -+ res = SZ_ERROR_PROGRESS; -+ break; -+ } -+ } -+ } -+ LzmaEnc_Finish(p); -+ return res; -+} -+ -+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress, -+ ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig)); -+ return LzmaEnc_Encode2((CLzmaEnc *)pp, progress); -+} -+ -+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ int i; -+ UInt32 dictSize = p->dictSize; -+ if (*size < LZMA_PROPS_SIZE) -+ return SZ_ERROR_PARAM; -+ *size = LZMA_PROPS_SIZE; -+ props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc); -+ -+ for (i = 11; i <= 30; i++) -+ { -+ if (dictSize <= ((UInt32)2 << i)) -+ { -+ dictSize = (2 << i); -+ break; -+ } -+ if (dictSize <= ((UInt32)3 << i)) -+ { -+ dictSize = (3 << i); -+ break; -+ } -+ } -+ -+ for (i = 0; i < 4; i++) -+ props[1 + i] = (Byte)(dictSize >> (8 * i)); -+ return SZ_OK; -+} -+ -+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ SRes res; -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ -+ CSeqOutStreamBuf outStream; -+ -+ LzmaEnc_SetInputBuf(p, src, srcLen); -+ -+ outStream.funcTable.Write = MyWrite; -+ outStream.data = dest; -+ outStream.rem = *destLen; -+ outStream.overflow = False; -+ -+ p->writeEndMark = writeEndMark; -+ -+ p->rc.outStream = &outStream.funcTable; -+ res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig); -+ if (res == SZ_OK) -+ res = LzmaEnc_Encode2(p, progress); -+ -+ *destLen -= outStream.rem; -+ if (outStream.overflow) -+ return SZ_ERROR_OUTPUT_EOF; -+ return res; -+} -+ -+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, -+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc); -+ SRes res; -+ if (p == 0) -+ return SZ_ERROR_MEM; -+ -+ res = LzmaEnc_SetProps(p, props); -+ if (res == SZ_OK) -+ { -+ res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize); -+ if (res == SZ_OK) -+ res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen, -+ writeEndMark, progress, alloc, allocBig); -+ } -+ -+ LzmaEnc_Destroy(p, alloc, allocBig); -+ return res; -+} ---- /dev/null -+++ b/lib/lzma/Makefile -@@ -0,0 +1,7 @@ -+lzma_compress-objs := LzFind.o LzmaEnc.o -+lzma_decompress-objs := LzmaDec.o -+ -+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o -+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o -+ -+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h diff --git a/target/linux/generic/pending-4.4/531-debloat_lzma.patch b/target/linux/generic/pending-4.4/531-debloat_lzma.patch deleted file mode 100644 index aa3c498016..0000000000 --- a/target/linux/generic/pending-4.4/531-debloat_lzma.patch +++ /dev/null @@ -1,1024 +0,0 @@ ---- a/include/linux/lzma/LzmaDec.h -+++ b/include/linux/lzma/LzmaDec.h -@@ -31,14 +31,6 @@ typedef struct _CLzmaProps - UInt32 dicSize; - } CLzmaProps; - --/* LzmaProps_Decode - decodes properties --Returns: -- SZ_OK -- SZ_ERROR_UNSUPPORTED - Unsupported properties --*/ -- --SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); -- - - /* ---------- LZMA Decoder state ---------- */ - -@@ -70,8 +62,6 @@ typedef struct - - #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; } - --void LzmaDec_Init(CLzmaDec *p); -- - /* There are two types of LZMA streams: - 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. - 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ -@@ -108,97 +98,6 @@ typedef enum - - /* ELzmaStatus is used only as output value for function call */ - -- --/* ---------- Interfaces ---------- */ -- --/* There are 3 levels of interfaces: -- 1) Dictionary Interface -- 2) Buffer Interface -- 3) One Call Interface -- You can select any of these interfaces, but don't mix functions from different -- groups for same object. */ -- -- --/* There are two variants to allocate state for Dictionary Interface: -- 1) LzmaDec_Allocate / LzmaDec_Free -- 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs -- You can use variant 2, if you set dictionary buffer manually. -- For Buffer Interface you must always use variant 1. -- --LzmaDec_Allocate* can return: -- SZ_OK -- SZ_ERROR_MEM - Memory allocation error -- SZ_ERROR_UNSUPPORTED - Unsupported properties --*/ -- --SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc); --void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc); -- --SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc); --void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc); -- --/* ---------- Dictionary Interface ---------- */ -- --/* You can use it, if you want to eliminate the overhead for data copying from -- dictionary to some other external buffer. -- You must work with CLzmaDec variables directly in this interface. -- -- STEPS: -- LzmaDec_Constr() -- LzmaDec_Allocate() -- for (each new stream) -- { -- LzmaDec_Init() -- while (it needs more decompression) -- { -- LzmaDec_DecodeToDic() -- use data from CLzmaDec::dic and update CLzmaDec::dicPos -- } -- } -- LzmaDec_Free() --*/ -- --/* LzmaDec_DecodeToDic -- -- The decoding to internal dictionary buffer (CLzmaDec::dic). -- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! -- --finishMode: -- It has meaning only if the decoding reaches output limit (dicLimit). -- LZMA_FINISH_ANY - Decode just dicLimit bytes. -- LZMA_FINISH_END - Stream must be finished after dicLimit. -- --Returns: -- SZ_OK -- status: -- LZMA_STATUS_FINISHED_WITH_MARK -- LZMA_STATUS_NOT_FINISHED -- LZMA_STATUS_NEEDS_MORE_INPUT -- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK -- SZ_ERROR_DATA - Data error --*/ -- --SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, -- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -- -- --/* ---------- Buffer Interface ---------- */ -- --/* It's zlib-like interface. -- See LzmaDec_DecodeToDic description for information about STEPS and return results, -- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need -- to work with CLzmaDec variables manually. -- --finishMode: -- It has meaning only if the decoding reaches output limit (*destLen). -- LZMA_FINISH_ANY - Decode just destLen bytes. -- LZMA_FINISH_END - Stream must be finished after (*destLen). --*/ -- --SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, -- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -- -- - /* ---------- One Call Interface ---------- */ - - /* LzmaDecode ---- a/lib/lzma/LzmaDec.c -+++ b/lib/lzma/LzmaDec.c -@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p, - p->needFlush = 0; - } - --void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) -+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) - { - p->needFlush = 1; - p->remainLen = 0; -@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p - p->needInitState = 1; - } - --void LzmaDec_Init(CLzmaDec *p) -+static void LzmaDec_Init(CLzmaDec *p) - { - p->dicPos = 0; - LzmaDec_InitDicAndState(p, True, True); -@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD - p->needInitState = 0; - } - --SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, -+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, - ELzmaFinishMode finishMode, ELzmaStatus *status) - { - SizeT inSize = *srcLen; -@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si - return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA; - } - --SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) --{ -- SizeT outSize = *destLen; -- SizeT inSize = *srcLen; -- *srcLen = *destLen = 0; -- for (;;) -- { -- SizeT inSizeCur = inSize, outSizeCur, dicPos; -- ELzmaFinishMode curFinishMode; -- SRes res; -- if (p->dicPos == p->dicBufSize) -- p->dicPos = 0; -- dicPos = p->dicPos; -- if (outSize > p->dicBufSize - dicPos) -- { -- outSizeCur = p->dicBufSize; -- curFinishMode = LZMA_FINISH_ANY; -- } -- else -- { -- outSizeCur = dicPos + outSize; -- curFinishMode = finishMode; -- } -- -- res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status); -- src += inSizeCur; -- inSize -= inSizeCur; -- *srcLen += inSizeCur; -- outSizeCur = p->dicPos - dicPos; -- memcpy(dest, p->dic + dicPos, outSizeCur); -- dest += outSizeCur; -- outSize -= outSizeCur; -- *destLen += outSizeCur; -- if (res != 0) -- return res; -- if (outSizeCur == 0 || outSize == 0) -- return SZ_OK; -- } --} -- --void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) -+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) - { - alloc->Free(alloc, p->probs); - p->probs = 0; - } - --static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc) --{ -- alloc->Free(alloc, p->dic); -- p->dic = 0; --} -- --void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) --{ -- LzmaDec_FreeProbs(p, alloc); -- LzmaDec_FreeDict(p, alloc); --} -- --SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) -+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) - { - UInt32 dicSize; - Byte d; -@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma - return SZ_OK; - } - --SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) -+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) - { - CLzmaProps propNew; - RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p, - p->prop = propNew; - return SZ_OK; - } -- --SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) --{ -- CLzmaProps propNew; -- SizeT dicBufSize; -- RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); -- dicBufSize = propNew.dicSize; -- if (p->dic == 0 || dicBufSize != p->dicBufSize) -- { -- LzmaDec_FreeDict(p, alloc); -- p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize); -- if (p->dic == 0) -- { -- LzmaDec_FreeProbs(p, alloc); -- return SZ_ERROR_MEM; -- } -- } -- p->dicBufSize = dicBufSize; -- p->prop = propNew; -- return SZ_OK; --} - - SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, - const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, ---- a/include/linux/lzma/LzmaEnc.h -+++ b/include/linux/lzma/LzmaEnc.h -@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps - } CLzmaEncProps; - - void LzmaEncProps_Init(CLzmaEncProps *p); --void LzmaEncProps_Normalize(CLzmaEncProps *p); --UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2); -- - - /* ---------- CLzmaEncHandle Interface ---------- */ - -@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc * - void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig); - SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props); - SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size); --SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream, -- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); - SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, - int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); - --/* ---------- One Call Interface ---------- */ -- --/* LzmaEncode --Return code: -- SZ_OK - OK -- SZ_ERROR_MEM - Memory allocation error -- SZ_ERROR_PARAM - Incorrect paramater -- SZ_ERROR_OUTPUT_EOF - output buffer overflow -- SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) --*/ -- --SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, -- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -- - #ifdef __cplusplus - } - #endif ---- a/lib/lzma/LzmaEnc.c -+++ b/lib/lzma/LzmaEnc.c -@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p) - p->writeEndMark = 0; - } - --void LzmaEncProps_Normalize(CLzmaEncProps *p) -+static void LzmaEncProps_Normalize(CLzmaEncProps *p) - { - int level = p->level; - if (level < 0) level = 5; -@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp - #endif - } - --UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) -+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) - { - CLzmaEncProps props = *props2; - LzmaEncProps_Normalize(&props); -@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL - - #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); } - --UInt32 GetPosSlot1(UInt32 pos) -+static UInt32 GetPosSlot1(UInt32 pos) - { - UInt32 res; - BSR2_RET(pos, res); -@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos) - #define kNumLogBits (9 + (int)sizeof(size_t) / 2) - #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7) - --void LzmaEnc_FastPosInit(Byte *g_FastPos) -+static void LzmaEnc_FastPosInit(Byte *g_FastPos) - { - int c = 2, slotFast; - g_FastPos[0] = 0; -@@ -339,58 +339,6 @@ typedef struct - CSaveState saveState; - } CLzmaEnc; - --void LzmaEnc_SaveState(CLzmaEncHandle pp) --{ -- CLzmaEnc *p = (CLzmaEnc *)pp; -- CSaveState *dest = &p->saveState; -- int i; -- dest->lenEnc = p->lenEnc; -- dest->repLenEnc = p->repLenEnc; -- dest->state = p->state; -- -- for (i = 0; i < kNumStates; i++) -- { -- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); -- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); -- } -- for (i = 0; i < kNumLenToPosStates; i++) -- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); -- memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); -- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); -- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); -- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); -- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); -- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); -- memcpy(dest->reps, p->reps, sizeof(p->reps)); -- memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb)); --} -- --void LzmaEnc_RestoreState(CLzmaEncHandle pp) --{ -- CLzmaEnc *dest = (CLzmaEnc *)pp; -- const CSaveState *p = &dest->saveState; -- int i; -- dest->lenEnc = p->lenEnc; -- dest->repLenEnc = p->repLenEnc; -- dest->state = p->state; -- -- for (i = 0; i < kNumStates; i++) -- { -- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); -- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); -- } -- for (i = 0; i < kNumLenToPosStates; i++) -- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); -- memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); -- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); -- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); -- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); -- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); -- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); -- memcpy(dest->reps, p->reps, sizeof(p->reps)); -- memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb)); --} -- - SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2) - { - CLzmaEnc *p = (CLzmaEnc *)pp; -@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE - while (symbol < 0x10000); - } - --void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) -+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) - { - UInt32 i; - for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits)) -@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc - p->matchPriceCount = 0; - } - --void LzmaEnc_Construct(CLzmaEnc *p) -+static void LzmaEnc_Construct(CLzmaEnc *p) - { - RangeEnc_Construct(&p->rc); - MatchFinder_Construct(&p->matchFinderBase); -@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc * - return p; - } - --void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) -+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) - { - alloc->Free(alloc, p->litProbs); - alloc->Free(alloc, p->saveState.litProbs); -@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl - p->saveState.litProbs = 0; - } - --void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig) -+static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig) - { - #ifndef _7ZIP_ST - MatchFinderMt_Destruct(&p->matchFinderMt, allocBig); -@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U - return SZ_OK; - } - --void LzmaEnc_Init(CLzmaEnc *p) -+static void LzmaEnc_Init(CLzmaEnc *p) - { - UInt32 i; - p->state = 0; -@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p) - p->lpMask = (1 << p->lp) - 1; - } - --void LzmaEnc_InitPrices(CLzmaEnc *p) -+static void LzmaEnc_InitPrices(CLzmaEnc *p) - { - if (!p->fastMode) - { -@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn - return SZ_OK; - } - --static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, -- ISzAlloc *alloc, ISzAlloc *allocBig) --{ -- CLzmaEnc *p = (CLzmaEnc *)pp; -- p->matchFinderBase.stream = inStream; -- p->needInit = 1; -- p->rc.outStream = outStream; -- return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig); --} -- --SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp, -- ISeqInStream *inStream, UInt32 keepWindowSize, -- ISzAlloc *alloc, ISzAlloc *allocBig) --{ -- CLzmaEnc *p = (CLzmaEnc *)pp; -- p->matchFinderBase.stream = inStream; -- p->needInit = 1; -- return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); --} -- - static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen) - { - p->matchFinderBase.directInput = 1; -@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc - p->matchFinderBase.directInputRem = srcLen; - } - --SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen, -+static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen, - UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) - { - CLzmaEnc *p = (CLzmaEnc *)pp; -@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p - return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); - } - --void LzmaEnc_Finish(CLzmaEncHandle pp) -+static void LzmaEnc_Finish(CLzmaEncHandle pp) - { - #ifndef _7ZIP_ST - CLzmaEnc *p = (CLzmaEnc *)pp; -@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo - return size; - } - -- --UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp) --{ -- const CLzmaEnc *p = (CLzmaEnc *)pp; -- return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); --} -- --const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp) --{ -- const CLzmaEnc *p = (CLzmaEnc *)pp; -- return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; --} -- --SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit, -- Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize) --{ -- CLzmaEnc *p = (CLzmaEnc *)pp; -- UInt64 nowPos64; -- SRes res; -- CSeqOutStreamBuf outStream; -- -- outStream.funcTable.Write = MyWrite; -- outStream.data = dest; -- outStream.rem = *destLen; -- outStream.overflow = False; -- -- p->writeEndMark = False; -- p->finished = False; -- p->result = SZ_OK; -- -- if (reInit) -- LzmaEnc_Init(p); -- LzmaEnc_InitPrices(p); -- nowPos64 = p->nowPos64; -- RangeEnc_Init(&p->rc); -- p->rc.outStream = &outStream.funcTable; -- -- res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize); -- -- *unpackSize = (UInt32)(p->nowPos64 - nowPos64); -- *destLen -= outStream.rem; -- if (outStream.overflow) -- return SZ_ERROR_OUTPUT_EOF; -- -- return res; --} -- - static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress) - { - SRes res = SZ_OK; -@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p, - return res; - } - --SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress, -- ISzAlloc *alloc, ISzAlloc *allocBig) --{ -- RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig)); -- return LzmaEnc_Encode2((CLzmaEnc *)pp, progress); --} -- - SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size) - { - CLzmaEnc *p = (CLzmaEnc *)pp; -@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp - return SZ_ERROR_OUTPUT_EOF; - return res; - } -- --SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, -- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) --{ -- CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc); -- SRes res; -- if (p == 0) -- return SZ_ERROR_MEM; -- -- res = LzmaEnc_SetProps(p, props); -- if (res == SZ_OK) -- { -- res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize); -- if (res == SZ_OK) -- res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen, -- writeEndMark, progress, alloc, allocBig); -- } -- -- LzmaEnc_Destroy(p, alloc, allocBig); -- return res; --} ---- a/include/linux/lzma/LzFind.h -+++ b/include/linux/lzma/LzFind.h -@@ -55,11 +55,6 @@ typedef struct _CMatchFinder - - #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos) - --int MatchFinder_NeedMove(CMatchFinder *p); --Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p); --void MatchFinder_MoveBlock(CMatchFinder *p); --void MatchFinder_ReadIfRequired(CMatchFinder *p); -- - void MatchFinder_Construct(CMatchFinder *p); - - /* Conditions: -@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p, - UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, - ISzAlloc *alloc); - void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc); --void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems); --void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue); -- --UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son, -- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue, -- UInt32 *distances, UInt32 maxLen); - - /* - Conditions: -@@ -102,12 +91,6 @@ typedef struct _IMatchFinder - - void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable); - --void MatchFinder_Init(CMatchFinder *p); --UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); --UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); --void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); --void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); -- - #ifdef __cplusplus - } - #endif ---- a/lib/lzma/LzFind.c -+++ b/lib/lzma/LzFind.c -@@ -14,9 +14,15 @@ - - #define kStartMaxLen 3 - -+#if 0 -+#define DIRECT_INPUT p->directInput -+#else -+#define DIRECT_INPUT 1 -+#endif -+ - static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc) - { -- if (!p->directInput) -+ if (!DIRECT_INPUT) - { - alloc->Free(alloc, p->bufferBase); - p->bufferBase = 0; -@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder - static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc) - { - UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv; -- if (p->directInput) -+ if (DIRECT_INPUT) - { - p->blockSize = blockSize; - return 1; -@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde - return (p->bufferBase != 0); - } - --Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } --Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } -+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } -+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } - --UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } -+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } - --void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) -+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) - { - p->posLimit -= subValue; - p->pos -= subValue; -@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch - { - if (p->streamEndWasReached || p->result != SZ_OK) - return; -- if (p->directInput) -+ if (DIRECT_INPUT) - { - UInt32 curSize = 0xFFFFFFFF - p->streamPos; - if (curSize > p->directInputRem) -@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch - } - } - --void MatchFinder_MoveBlock(CMatchFinder *p) -+static void MatchFinder_MoveBlock(CMatchFinder *p) - { - memmove(p->bufferBase, - p->buffer - p->keepSizeBefore, -@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder - p->buffer = p->bufferBase + p->keepSizeBefore; - } - --int MatchFinder_NeedMove(CMatchFinder *p) -+static int MatchFinder_NeedMove(CMatchFinder *p) - { -- if (p->directInput) -+ if (DIRECT_INPUT) - return 0; - /* if (p->streamEndWasReached) return 0; */ - return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter); - } - --void MatchFinder_ReadIfRequired(CMatchFinder *p) --{ -- if (p->streamEndWasReached) -- return; -- if (p->keepSizeAfter >= p->streamPos - p->pos) -- MatchFinder_ReadBlock(p); --} -- - static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p) - { - if (MatchFinder_NeedMove(p)) -@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch - p->posLimit = p->pos + limit; - } - --void MatchFinder_Init(CMatchFinder *p) -+static void MatchFinder_Init(CMatchFinder *p) - { - UInt32 i; - for (i = 0; i < p->hashSizeSum; i++) -@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM - return (p->pos - p->historySize - 1) & kNormalizeMask; - } - --void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) -+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) - { - UInt32 i; - for (i = 0; i < numItems; i++) -@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat - MatchFinder_SetLimits(p); - } - --static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, -- UInt32 *distances, UInt32 maxLen) --{ -- son[_cyclicBufferPos] = curMatch; -- for (;;) -- { -- UInt32 delta = pos - curMatch; -- if (cutValue-- == 0 || delta >= _cyclicBufferSize) -- return distances; -- { -- const Byte *pb = cur - delta; -- curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)]; -- if (pb[maxLen] == cur[maxLen] && *pb == *cur) -- { -- UInt32 len = 0; -- while (++len != lenLimit) -- if (pb[len] != cur[len]) -- break; -- if (maxLen < len) -- { -- *distances++ = maxLen = len; -- *distances++ = delta - 1; -- if (len == lenLimit) -- return distances; -- } -- } -- } -- } --} -- --UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, - UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, - UInt32 *distances, UInt32 maxLen) - { -@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi - p->buffer++; \ - if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p); - --#define MOVE_POS_RET MOVE_POS return offset; -- - static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; } - -+#define MOVE_POS_RET MatchFinder_MovePos(p); return offset; -+ - #define GET_MATCHES_HEADER2(minLen, ret_op) \ - UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \ - lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \ -@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi - distances + offset, maxLen) - distances); MOVE_POS_RET; - - #define SKIP_FOOTER \ -- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS; -- --static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) --{ -- UInt32 offset; -- GET_MATCHES_HEADER(2) -- HASH2_CALC; -- curMatch = p->hash[hashValue]; -- p->hash[hashValue] = p->pos; -- offset = 0; -- GET_MATCHES_FOOTER(offset, 1) --} -- --UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) --{ -- UInt32 offset; -- GET_MATCHES_HEADER(3) -- HASH_ZIP_CALC; -- curMatch = p->hash[hashValue]; -- p->hash[hashValue] = p->pos; -- offset = 0; -- GET_MATCHES_FOOTER(offset, 2) --} -- --static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) --{ -- UInt32 hash2Value, delta2, maxLen, offset; -- GET_MATCHES_HEADER(3) -- -- HASH3_CALC; -- -- delta2 = p->pos - p->hash[hash2Value]; -- curMatch = p->hash[kFix3HashSize + hashValue]; -- -- p->hash[hash2Value] = -- p->hash[kFix3HashSize + hashValue] = p->pos; -- -- -- maxLen = 2; -- offset = 0; -- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -- { -- for (; maxLen != lenLimit; maxLen++) -- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -- break; -- distances[0] = maxLen; -- distances[1] = delta2 - 1; -- offset = 2; -- if (maxLen == lenLimit) -- { -- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); -- MOVE_POS_RET; -- } -- } -- GET_MATCHES_FOOTER(offset, maxLen) --} -+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p); - - static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) - { -@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches - GET_MATCHES_FOOTER(offset, maxLen) - } - --static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) --{ -- UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; -- GET_MATCHES_HEADER(4) -- -- HASH4_CALC; -- -- delta2 = p->pos - p->hash[ hash2Value]; -- delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; -- curMatch = p->hash[kFix4HashSize + hashValue]; -- -- p->hash[ hash2Value] = -- p->hash[kFix3HashSize + hash3Value] = -- p->hash[kFix4HashSize + hashValue] = p->pos; -- -- maxLen = 1; -- offset = 0; -- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -- { -- distances[0] = maxLen = 2; -- distances[1] = delta2 - 1; -- offset = 2; -- } -- if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) -- { -- maxLen = 3; -- distances[offset + 1] = delta3 - 1; -- offset += 2; -- delta2 = delta3; -- } -- if (offset != 0) -- { -- for (; maxLen != lenLimit; maxLen++) -- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -- break; -- distances[offset - 2] = maxLen; -- if (maxLen == lenLimit) -- { -- p->son[p->cyclicBufferPos] = curMatch; -- MOVE_POS_RET; -- } -- } -- if (maxLen < 3) -- maxLen = 3; -- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), -- distances + offset, maxLen) - (distances)); -- MOVE_POS_RET --} -- --UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) --{ -- UInt32 offset; -- GET_MATCHES_HEADER(3) -- HASH_ZIP_CALC; -- curMatch = p->hash[hashValue]; -- p->hash[hashValue] = p->pos; -- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), -- distances, 2) - (distances)); -- MOVE_POS_RET --} -- --static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num) --{ -- do -- { -- SKIP_HEADER(2) -- HASH2_CALC; -- curMatch = p->hash[hashValue]; -- p->hash[hashValue] = p->pos; -- SKIP_FOOTER -- } -- while (--num != 0); --} -- --void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) --{ -- do -- { -- SKIP_HEADER(3) -- HASH_ZIP_CALC; -- curMatch = p->hash[hashValue]; -- p->hash[hashValue] = p->pos; -- SKIP_FOOTER -- } -- while (--num != 0); --} -- --static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num) --{ -- do -- { -- UInt32 hash2Value; -- SKIP_HEADER(3) -- HASH3_CALC; -- curMatch = p->hash[kFix3HashSize + hashValue]; -- p->hash[hash2Value] = -- p->hash[kFix3HashSize + hashValue] = p->pos; -- SKIP_FOOTER -- } -- while (--num != 0); --} -- - static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) - { - do -@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF - while (--num != 0); - } - --static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) --{ -- do -- { -- UInt32 hash2Value, hash3Value; -- SKIP_HEADER(4) -- HASH4_CALC; -- curMatch = p->hash[kFix4HashSize + hashValue]; -- p->hash[ hash2Value] = -- p->hash[kFix3HashSize + hash3Value] = -- p->hash[kFix4HashSize + hashValue] = p->pos; -- p->son[p->cyclicBufferPos] = curMatch; -- MOVE_POS -- } -- while (--num != 0); --} -- --void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) --{ -- do -- { -- SKIP_HEADER(3) -- HASH_ZIP_CALC; -- curMatch = p->hash[hashValue]; -- p->hash[hashValue] = p->pos; -- p->son[p->cyclicBufferPos] = curMatch; -- MOVE_POS -- } -- while (--num != 0); --} -- - void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable) - { - vTable->Init = (Mf_Init_Func)MatchFinder_Init; - vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte; - vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes; - vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos; -- if (!p->btMode) -- { -- vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches; -- vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip; -- } -- else if (p->numHashBytes == 2) -- { -- vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches; -- vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip; -- } -- else if (p->numHashBytes == 3) -- { -- vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches; -- vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip; -- } -- else -- { -- vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches; -- vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; -- } -+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; - } diff --git a/target/linux/generic/pending-4.4/532-jffs2_eofdetect.patch b/target/linux/generic/pending-4.4/532-jffs2_eofdetect.patch deleted file mode 100644 index 8ce53d8bed..0000000000 --- a/target/linux/generic/pending-4.4/532-jffs2_eofdetect.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/fs/jffs2/build.c -+++ b/fs/jffs2/build.c -@@ -116,6 +116,16 @@ static int jffs2_build_filesystem(struct - dbg_fsbuild("scanned flash completely\n"); - jffs2_dbg_dump_block_lists_nolock(c); - -+ if (c->flags & (1 << 7)) { -+ printk("%s(): unlocking the mtd device... ", __func__); -+ mtd_unlock(c->mtd, 0, c->mtd->size); -+ printk("done.\n"); -+ -+ printk("%s(): erasing all blocks after the end marker... ", __func__); -+ jffs2_erase_pending_blocks(c, -1); -+ printk("done.\n"); -+ } -+ - dbg_fsbuild("pass 1 starting\n"); - c->flags |= JFFS2_SB_FLAG_BUILDING; - /* Now scan the directory tree, increasing nlink according to every dirent found. */ ---- a/fs/jffs2/scan.c -+++ b/fs/jffs2/scan.c -@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in - /* reset summary info for next eraseblock scan */ - jffs2_sum_reset_collected(s); - -- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), -- buf_size, s); -+ if (c->flags & (1 << 7)) { -+ if (mtd_block_isbad(c->mtd, jeb->offset)) -+ ret = BLK_STATE_BADBLOCK; -+ else -+ ret = BLK_STATE_ALLFF; -+ } else -+ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), -+ buf_size, s); - - if (ret < 0) - goto out; -@@ -561,6 +567,17 @@ full_scan: - return err; - } - -+ if ((buf[0] == 0xde) && -+ (buf[1] == 0xad) && -+ (buf[2] == 0xc0) && -+ (buf[3] == 0xde)) { -+ /* end of filesystem. erase everything after this point */ -+ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset); -+ c->flags |= (1 << 7); -+ -+ return BLK_STATE_ALLFF; -+ } -+ - /* We temporarily use 'ofs' as a pointer into the buffer/jeb */ - ofs = 0; - max_ofs = EMPTY_SCAN_SIZE(c->sector_size); diff --git a/target/linux/generic/pending-4.4/551-ubifs-fix-default-compression-selection.patch b/target/linux/generic/pending-4.4/551-ubifs-fix-default-compression-selection.patch deleted file mode 100644 index 1b0f30718c..0000000000 --- a/target/linux/generic/pending-4.4/551-ubifs-fix-default-compression-selection.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/fs/ubifs/sb.c -+++ b/fs/ubifs/sb.c -@@ -63,6 +63,17 @@ - /* Default time granularity in nanoseconds */ - #define DEFAULT_TIME_GRAN 1000000000 - -+static int get_default_compressor(void) -+{ -+ if (ubifs_compr_present(UBIFS_COMPR_LZO)) -+ return UBIFS_COMPR_LZO; -+ -+ if (ubifs_compr_present(UBIFS_COMPR_ZLIB)) -+ return UBIFS_COMPR_ZLIB; -+ -+ return UBIFS_COMPR_NONE; -+} -+ - /** - * create_default_filesystem - format empty UBI volume. - * @c: UBIFS file-system description object -@@ -183,7 +194,7 @@ static int create_default_filesystem(str - if (c->mount_opts.override_compr) - sup->default_compr = cpu_to_le16(c->mount_opts.compr_type); - else -- sup->default_compr = cpu_to_le16(UBIFS_COMPR_LZO); -+ sup->default_compr = cpu_to_le16(get_default_compressor()); - - generate_random_uuid(sup->uuid); - diff --git a/target/linux/generic/pending-4.4/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-4.4/600-netfilter_conntrack_flush.patch deleted file mode 100644 index 8794739658..0000000000 --- a/target/linux/generic/pending-4.4/600-netfilter_conntrack_flush.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/net/netfilter/nf_conntrack_standalone.c -+++ b/net/netfilter/nf_conntrack_standalone.c -@@ -17,6 +17,7 @@ - #include <linux/percpu.h> - #include <linux/netdevice.h> - #include <linux/security.h> -+#include <linux/inet.h> - #include <net/net_namespace.h> - #ifdef CONFIG_SYSCTL - #include <linux/sysctl.h> -@@ -288,10 +289,66 @@ static int ct_open(struct inode *inode, - sizeof(struct ct_iter_state)); - } - -+struct kill_request { -+ u16 family; -+ union nf_inet_addr addr; -+}; -+ -+static int kill_matching(struct nf_conn *i, void *data) -+{ -+ struct kill_request *kr = data; -+ struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple; -+ struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple; -+ -+ if (!kr->family) -+ return 1; -+ -+ if (t1->src.l3num != kr->family) -+ return 0; -+ -+ return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) || -+ nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) || -+ nf_inet_addr_cmp(&kr->addr, &t2->src.u3) || -+ nf_inet_addr_cmp(&kr->addr, &t2->dst.u3)); -+} -+ -+static ssize_t ct_file_write(struct file *file, const char __user *buf, -+ size_t count, loff_t *ppos) -+{ -+ struct seq_file *seq = file->private_data; -+ struct net *net = seq_file_net(seq); -+ struct kill_request kr = { }; -+ char req[INET6_ADDRSTRLEN] = { }; -+ -+ if (count == 0) -+ return 0; -+ -+ if (count >= INET6_ADDRSTRLEN) -+ count = INET6_ADDRSTRLEN - 1; -+ -+ if (copy_from_user(req, buf, count)) -+ return -EFAULT; -+ -+ if (strnchr(req, count, ':')) { -+ kr.family = AF_INET6; -+ if (!in6_pton(req, count, (void *)&kr.addr, '\n', NULL)) -+ return -EINVAL; -+ } else if (strnchr(req, count, '.')) { -+ kr.family = AF_INET; -+ if (!in4_pton(req, count, (void *)&kr.addr, '\n', NULL)) -+ return -EINVAL; -+ } -+ -+ nf_ct_iterate_cleanup(net, kill_matching, &kr, 0, 0); -+ -+ return count; -+} -+ - static const struct file_operations ct_file_ops = { - .owner = THIS_MODULE, - .open = ct_open, - .read = seq_read, -+ .write = ct_file_write, - .llseek = seq_lseek, - .release = seq_release_net, - }; -@@ -393,7 +450,7 @@ static int nf_conntrack_standalone_init_ - { - struct proc_dir_entry *pde; - -- pde = proc_create("nf_conntrack", 0440, net->proc_net, &ct_file_ops); -+ pde = proc_create("nf_conntrack", 0660, net->proc_net, &ct_file_ops); - if (!pde) - goto out_nf_conntrack; - diff --git a/target/linux/generic/pending-4.4/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-4.4/610-netfilter_match_bypass_default_checks.patch deleted file mode 100644 index dce8020c92..0000000000 --- a/target/linux/generic/pending-4.4/610-netfilter_match_bypass_default_checks.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h -+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h -@@ -87,6 +87,7 @@ struct ipt_ip { - #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */ - #define IPT_F_GOTO 0x02 /* Set if jump is a goto */ - #define IPT_F_MASK 0x03 /* All possible flag bits mask. */ -+#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */ - - /* Values for "inv" field in struct ipt_ip. */ - #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */ ---- a/net/ipv4/netfilter/ip_tables.c -+++ b/net/ipv4/netfilter/ip_tables.c -@@ -82,6 +82,9 @@ ip_packet_match(const struct iphdr *ip, - - #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg))) - -+ if (ipinfo->flags & IPT_F_NO_DEF_MATCH) -+ return true; -+ - if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr, - IPT_INV_SRCIP) || - FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr, -@@ -135,6 +138,29 @@ ip_packet_match(const struct iphdr *ip, - return true; - } - -+static void -+ip_checkdefault(struct ipt_ip *ip) -+{ -+ static const char iface_mask[IFNAMSIZ] = {}; -+ -+ if (ip->invflags || ip->flags & IPT_F_FRAG) -+ return; -+ -+ if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0) -+ return; -+ -+ if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0) -+ return; -+ -+ if (ip->smsk.s_addr || ip->dmsk.s_addr) -+ return; -+ -+ if (ip->proto) -+ return; -+ -+ ip->flags |= IPT_F_NO_DEF_MATCH; -+} -+ - static bool - ip_checkentry(const struct ipt_ip *ip) - { -@@ -655,6 +681,8 @@ find_check_entry(struct ipt_entry *e, st - struct xt_entry_match *ematch; - unsigned long pcnt; - -+ ip_checkdefault(&e->ip); -+ - pcnt = xt_percpu_counter_alloc(); - if (IS_ERR_VALUE(pcnt)) - return -ENOMEM; -@@ -953,6 +981,7 @@ copy_entries_to_user(unsigned int total_ - const struct xt_table_info *private = table->private; - int ret = 0; - const void *loc_cpu_entry; -+ u8 flags; - - counters = alloc_counters(table); - if (IS_ERR(counters)) -@@ -980,6 +1009,14 @@ copy_entries_to_user(unsigned int total_ - goto free_counters; - } - -+ flags = e->ip.flags & IPT_F_MASK; -+ if (copy_to_user(userptr + off -+ + offsetof(struct ipt_entry, ip.flags), -+ &flags, sizeof(flags)) != 0) { -+ ret = -EFAULT; -+ goto free_counters; -+ } -+ - for (i = sizeof(struct ipt_entry); - i < e->target_offset; - i += m->u.match_size) { -@@ -1385,12 +1422,15 @@ compat_copy_entry_to_user(struct ipt_ent - compat_uint_t origsize; - const struct xt_entry_match *ematch; - int ret = 0; -+ u8 flags = e->ip.flags & IPT_F_MASK; - - origsize = *size; - ce = (struct compat_ipt_entry __user *)*dstptr; - if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 || - copy_to_user(&ce->counters, &counters[i], -- sizeof(counters[i])) != 0) -+ sizeof(counters[i])) != 0 || -+ copy_to_user(&ce->ip.flags, &flags, -+ sizeof(flags)) != 0) - return -EFAULT; - - *dstptr += sizeof(struct compat_ipt_entry); diff --git a/target/linux/generic/pending-4.4/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-4.4/611-netfilter_match_bypass_default_table.patch deleted file mode 100644 index 1c565198b4..0000000000 --- a/target/linux/generic/pending-4.4/611-netfilter_match_bypass_default_table.patch +++ /dev/null @@ -1,111 +0,0 @@ ---- a/net/ipv4/netfilter/ip_tables.c -+++ b/net/ipv4/netfilter/ip_tables.c -@@ -308,6 +308,33 @@ struct ipt_entry *ipt_next_entry(const s - return (void *)entry + entry->next_offset; - } - -+static bool -+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict) -+{ -+ struct xt_entry_target *t; -+ struct xt_standard_target *st; -+ -+ if (e->target_offset != sizeof(struct ipt_entry)) -+ return false; -+ -+ if (!(e->ip.flags & IPT_F_NO_DEF_MATCH)) -+ return false; -+ -+ t = ipt_get_target(e); -+ if (t->u.kernel.target->target) -+ return false; -+ -+ st = (struct xt_standard_target *) t; -+ if (st->verdict == XT_RETURN) -+ return false; -+ -+ if (st->verdict >= 0) -+ return false; -+ -+ *verdict = (unsigned)(-st->verdict) - 1; -+ return true; -+} -+ - /* Returns one of the generic firewall policies, like NF_ACCEPT. */ - unsigned int - ipt_do_table(struct sk_buff *skb, -@@ -328,28 +355,8 @@ ipt_do_table(struct sk_buff *skb, - unsigned int addend; - - /* Initialization */ -- stackidx = 0; -- ip = ip_hdr(skb); -- indev = state->in ? state->in->name : nulldevname; -- outdev = state->out ? state->out->name : nulldevname; -- /* We handle fragments by dealing with the first fragment as -- * if it was a normal packet. All other fragments are treated -- * normally, except that they will NEVER match rules that ask -- * things we don't know, ie. tcp syn flag or ports). If the -- * rule is also a fragment-specific rule, non-fragments won't -- * match it. */ -- acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET; -- acpar.thoff = ip_hdrlen(skb); -- acpar.hotdrop = false; -- acpar.net = state->net; -- acpar.in = state->in; -- acpar.out = state->out; -- acpar.family = NFPROTO_IPV4; -- acpar.hooknum = hook; -- - IP_NF_ASSERT(table->valid_hooks & (1 << hook)); - local_bh_disable(); -- addend = xt_write_recseq_begin(); - private = table->private; - cpu = smp_processor_id(); - /* -@@ -358,6 +365,23 @@ ipt_do_table(struct sk_buff *skb, - */ - smp_read_barrier_depends(); - table_base = private->entries; -+ -+ e = get_entry(table_base, private->hook_entry[hook]); -+ if (ipt_handle_default_rule(e, &verdict)) { -+ struct xt_counters *counter; -+ -+ counter = xt_get_this_cpu_counter(&e->counters); -+ ADD_COUNTER(*counter, skb->len, 1); -+ local_bh_enable(); -+ return verdict; -+ } -+ -+ stackidx = 0; -+ ip = ip_hdr(skb); -+ indev = state->in ? state->in->name : nulldevname; -+ outdev = state->out ? state->out->name : nulldevname; -+ -+ addend = xt_write_recseq_begin(); - jumpstack = (struct ipt_entry **)private->jumpstack[cpu]; - - /* Switch to alternate jumpstack if we're being invoked via TEE. -@@ -370,7 +394,20 @@ ipt_do_table(struct sk_buff *skb, - if (static_key_false(&xt_tee_enabled)) - jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated); - -- e = get_entry(table_base, private->hook_entry[hook]); -+ /* We handle fragments by dealing with the first fragment as -+ * if it was a normal packet. All other fragments are treated -+ * normally, except that they will NEVER match rules that ask -+ * things we don't know, ie. tcp syn flag or ports). If the -+ * rule is also a fragment-specific rule, non-fragments won't -+ * match it. */ -+ acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET; -+ acpar.thoff = ip_hdrlen(skb); -+ acpar.hotdrop = false; -+ acpar.net = state->net; -+ acpar.in = state->in; -+ acpar.out = state->out; -+ acpar.family = NFPROTO_IPV4; -+ acpar.hooknum = hook; - - pr_debug("Entering %s(hook %u), UF %p\n", - table->name, hook, diff --git a/target/linux/generic/pending-4.4/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-4.4/612-netfilter_match_reduce_memory_access.patch deleted file mode 100644 index 72172d8bb4..0000000000 --- a/target/linux/generic/pending-4.4/612-netfilter_match_reduce_memory_access.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/net/ipv4/netfilter/ip_tables.c -+++ b/net/ipv4/netfilter/ip_tables.c -@@ -85,9 +85,11 @@ ip_packet_match(const struct iphdr *ip, - if (ipinfo->flags & IPT_F_NO_DEF_MATCH) - return true; - -- if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr, -+ if (FWINV(ipinfo->smsk.s_addr && -+ (ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr, - IPT_INV_SRCIP) || -- FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr, -+ FWINV(ipinfo->dmsk.s_addr && -+ (ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr, - IPT_INV_DSTIP)) { - dprintf("Source or dest mismatch.\n"); - diff --git a/target/linux/generic/pending-4.4/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/pending-4.4/613-netfilter_optional_tcp_window_check.patch deleted file mode 100644 index 3740dd74e5..0000000000 --- a/target/linux/generic/pending-4.4/613-netfilter_optional_tcp_window_check.patch +++ /dev/null @@ -1,36 +0,0 @@ ---- a/net/netfilter/nf_conntrack_proto_tcp.c -+++ b/net/netfilter/nf_conntrack_proto_tcp.c -@@ -33,6 +33,9 @@ - #include <net/netfilter/ipv4/nf_conntrack_ipv4.h> - #include <net/netfilter/ipv6/nf_conntrack_ipv6.h> - -+/* Do not check the TCP window for incoming packets */ -+static int nf_ct_tcp_no_window_check __read_mostly = 1; -+ - /* "Be conservative in what you do, - be liberal in what you accept from others." - If it's non-zero, we mark only out of window RST segments as INVALID. */ -@@ -515,6 +518,9 @@ static bool tcp_in_window(const struct n - s32 receiver_offset; - bool res, in_recv_win; - -+ if (nf_ct_tcp_no_window_check) -+ return true; -+ - /* - * Get the required data from the packet. - */ -@@ -1481,6 +1487,13 @@ static struct ctl_table tcp_sysctl_table - .mode = 0644, - .proc_handler = proc_dointvec, - }, -+ { -+ .procname = "nf_conntrack_tcp_no_window_check", -+ .data = &nf_ct_tcp_no_window_check, -+ .maxlen = sizeof(unsigned int), -+ .mode = 0644, -+ .proc_handler = proc_dointvec, -+ }, - { } - }; - diff --git a/target/linux/generic/pending-4.4/616-net_optimize_xfrm_calls.patch b/target/linux/generic/pending-4.4/616-net_optimize_xfrm_calls.patch deleted file mode 100644 index e4634e321b..0000000000 --- a/target/linux/generic/pending-4.4/616-net_optimize_xfrm_calls.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/net/netfilter/nf_nat_core.c -+++ b/net/netfilter/nf_nat_core.c -@@ -90,6 +90,9 @@ int nf_xfrm_me_harder(struct net *net, s - struct dst_entry *dst; - int err; - -+ if (skb->dev && !dev_net(skb->dev)->xfrm.policy_count[XFRM_POLICY_OUT]) -+ return 0; -+ - err = xfrm_decode_session(skb, &fl, family); - if (err < 0) - return err; diff --git a/target/linux/generic/pending-4.4/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-4.4/620-net_sched-codel-do-not-defer-queue-length-update.patch deleted file mode 100644 index 2ec9c7a9e2..0000000000 --- a/target/linux/generic/pending-4.4/620-net_sched-codel-do-not-defer-queue-length-update.patch +++ /dev/null @@ -1,86 +0,0 @@ -From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> -Date: Mon, 21 Aug 2017 11:14:14 +0300 -Subject: [PATCH] net_sched/codel: do not defer queue length update - -When codel wants to drop last packet in ->dequeue() it cannot call -qdisc_tree_reduce_backlog() right away - it will notify parent qdisc -about zero qlen and HTB/HFSC will deactivate class. The same class will -be deactivated second time by caller of ->dequeue(). Currently codel and -fq_codel defer update. This triggers warning in HFSC when it's qlen != 0 -but there is no active classes. - -This patch update parent queue length immediately: just temporary increase -qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation -if we have skb to return. - -This might open another problem in HFSC - now operation peek could fail and -deactivate parent class. - -Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> -Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581 ---- - ---- a/net/sched/sch_codel.c -+++ b/net/sched/sch_codel.c -@@ -79,11 +79,17 @@ static struct sk_buff *codel_qdisc_deque - - skb = codel_dequeue(sch, &q->params, &q->vars, &q->stats, dequeue); - -- /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0, -- * or HTB crashes. Defer it for next round. -+ /* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate -+ * parent class, dequeue in parent qdisc will do the same if we -+ * return skb. Temporary increment qlen if we have skb. - */ -- if (q->stats.drop_count && sch->q.qlen) { -- qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len); -+ if (q->stats.drop_count) { -+ if (skb) -+ sch->q.qlen++; -+ qdisc_tree_reduce_backlog(sch, q->stats.drop_count, -+ q->stats.drop_len); -+ if (skb) -+ sch->q.qlen--; - q->stats.drop_count = 0; - q->stats.drop_len = 0; - } ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -311,6 +311,21 @@ begin: - flow->dropped += q->cstats.drop_count - prev_drop_count; - flow->dropped += q->cstats.ecn_mark - prev_ecn_mark; - -+ /* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate -+ * parent class, dequeue in parent qdisc will do the same if we -+ * return skb. Temporary increment qlen if we have skb. -+ */ -+ if (q->cstats.drop_count) { -+ if (skb) -+ sch->q.qlen++; -+ qdisc_tree_reduce_backlog(sch, q->cstats.drop_count, -+ q->cstats.drop_len); -+ if (skb) -+ sch->q.qlen--; -+ q->cstats.drop_count = 0; -+ q->cstats.drop_len = 0; -+ } -+ - if (!skb) { - /* force a pass through old_flows to prevent starvation */ - if ((head == &q->new_flows) && !list_empty(&q->old_flows)) -@@ -321,15 +336,6 @@ begin: - } - qdisc_bstats_update(sch, skb); - flow->deficit -= qdisc_pkt_len(skb); -- /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0, -- * or HTB crashes. Defer it for next round. -- */ -- if (q->cstats.drop_count && sch->q.qlen) { -- qdisc_tree_reduce_backlog(sch, q->cstats.drop_count, -- q->cstats.drop_len); -- q->cstats.drop_count = 0; -- q->cstats.drop_len = 0; -- } - return skb; - } - diff --git a/target/linux/generic/pending-4.4/630-packet_socket_type.patch b/target/linux/generic/pending-4.4/630-packet_socket_type.patch deleted file mode 100644 index 0314938ac4..0000000000 --- a/target/linux/generic/pending-4.4/630-packet_socket_type.patch +++ /dev/null @@ -1,134 +0,0 @@ -This patch allows the user to specify desired packet types (outgoing, -broadcast, unicast, etc.) on packet sockets via setsockopt. -This can reduce the load in situations where only a limited number -of packet types are necessary - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/include/uapi/linux/if_packet.h -+++ b/include/uapi/linux/if_packet.h -@@ -31,6 +31,8 @@ struct sockaddr_ll { - #define PACKET_KERNEL 7 /* To kernel space */ - /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */ - #define PACKET_FASTROUTE 6 /* Fastrouted frame */ -+#define PACKET_MASK_ANY 0xffffffff /* mask for packet type bits */ -+ - - /* Packet socket options */ - -@@ -56,6 +58,7 @@ struct sockaddr_ll { - #define PACKET_QDISC_BYPASS 20 - #define PACKET_ROLLOVER_STATS 21 - #define PACKET_FANOUT_DATA 22 -+#define PACKET_RECV_TYPE 23 - - #define PACKET_FANOUT_HASH 0 - #define PACKET_FANOUT_LB 1 ---- a/net/packet/af_packet.c -+++ b/net/packet/af_packet.c -@@ -1777,6 +1777,7 @@ static int packet_rcv_spkt(struct sk_buf - { - struct sock *sk; - struct sockaddr_pkt *spkt; -+ struct packet_sock *po; - - /* - * When we registered the protocol we saved the socket in the data -@@ -1784,6 +1785,7 @@ static int packet_rcv_spkt(struct sk_buf - */ - - sk = pt->af_packet_priv; -+ po = pkt_sk(sk); - - /* - * Yank back the headers [hope the device set this -@@ -1796,7 +1798,7 @@ static int packet_rcv_spkt(struct sk_buf - * so that this procedure is noop. - */ - -- if (skb->pkt_type == PACKET_LOOPBACK) -+ if (!(po->pkt_type & (1 << skb->pkt_type))) - goto out; - - if (!net_eq(dev_net(dev), sock_net(sk))) -@@ -1999,12 +2001,12 @@ static int packet_rcv(struct sk_buff *sk - int skb_len = skb->len; - unsigned int snaplen, res; - -- if (skb->pkt_type == PACKET_LOOPBACK) -- goto drop; -- - sk = pt->af_packet_priv; - po = pkt_sk(sk); - -+ if (!(po->pkt_type & (1 << skb->pkt_type))) -+ goto drop; -+ - if (!net_eq(dev_net(dev), sock_net(sk))) - goto drop; - -@@ -2124,12 +2126,12 @@ static int tpacket_rcv(struct sk_buff *s - BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32); - BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48); - -- if (skb->pkt_type == PACKET_LOOPBACK) -- goto drop; -- - sk = pt->af_packet_priv; - po = pkt_sk(sk); - -+ if (!(po->pkt_type & (1 << skb->pkt_type))) -+ goto drop; -+ - if (!net_eq(dev_net(dev), sock_net(sk))) - goto drop; - -@@ -3126,6 +3128,7 @@ static int packet_create(struct net *net - mutex_init(&po->pg_vec_lock); - po->rollover = NULL; - po->prot_hook.func = packet_rcv; -+ po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK); - - if (sock->type == SOCK_PACKET) - po->prot_hook.func = packet_rcv_spkt; -@@ -3755,6 +3758,16 @@ packet_setsockopt(struct socket *sock, i - po->xmit = val ? packet_direct_xmit : dev_queue_xmit; - return 0; - } -+ case PACKET_RECV_TYPE: -+ { -+ unsigned int val; -+ if (optlen != sizeof(val)) -+ return -EINVAL; -+ if (copy_from_user(&val, optval, sizeof(val))) -+ return -EFAULT; -+ po->pkt_type = val & ~BIT(PACKET_LOOPBACK); -+ return 0; -+ } - default: - return -ENOPROTOOPT; - } -@@ -3807,6 +3820,13 @@ static int packet_getsockopt(struct sock - case PACKET_VNET_HDR: - val = po->has_vnet_hdr; - break; -+ case PACKET_RECV_TYPE: -+ if (len > sizeof(unsigned int)) -+ len = sizeof(unsigned int); -+ val = po->pkt_type; -+ -+ data = &val; -+ break; - case PACKET_VERSION: - val = po->tp_version; - break; ---- a/net/packet/internal.h -+++ b/net/packet/internal.h -@@ -128,6 +128,7 @@ struct packet_sock { - struct net_device __rcu *cached_dev; - int (*xmit)(struct sk_buff *skb); - struct packet_type prot_hook ____cacheline_aligned_in_smp; -+ unsigned int pkt_type; - }; - - static struct packet_sock *pkt_sk(struct sock *sk) diff --git a/target/linux/generic/pending-4.4/640-bridge_no_eap_forward.patch b/target/linux/generic/pending-4.4/640-bridge_no_eap_forward.patch deleted file mode 100644 index a6dfb4ee59..0000000000 --- a/target/linux/generic/pending-4.4/640-bridge_no_eap_forward.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: [PATCH] bridge: no EAP forward - -When bridging, do not forward EAP frames to other ports, only deliver -them locally. -Fixes WPA authentication issues with multiples APs that are connected to -each other via bridges. ---- ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -169,7 +169,11 @@ int br_handle_frame_finish(struct net *n - if (IS_ENABLED(CONFIG_INET) && skb->protocol == htons(ETH_P_ARP)) - br_do_proxy_arp(skb, br, vid, p); - -- if (is_broadcast_ether_addr(dest)) { -+ if (skb->protocol == htons(ETH_P_PAE)) { -+ skb2 = skb; -+ /* Do not forward 802.1x/EAP frames */ -+ skb = NULL; -+ } else if (is_broadcast_ether_addr(dest)) { - skb2 = skb; - unicast = false; - } else if (is_multicast_ether_addr(dest)) { diff --git a/target/linux/generic/pending-4.4/641-bridge_always_accept_eap.patch b/target/linux/generic/pending-4.4/641-bridge_always_accept_eap.patch deleted file mode 100644 index a4e2c03cf9..0000000000 --- a/target/linux/generic/pending-4.4/641-bridge_always_accept_eap.patch +++ /dev/null @@ -1,17 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: [PATCH] bridge: always accept EAP - -Allow EAP frames to pass through bridges even in learning state. Fixes -issues with WDS. ---- ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -153,7 +153,7 @@ int br_handle_frame_finish(struct net *n - br_multicast_rcv(br, p, skb, vid)) - goto drop; - -- if (p->state == BR_STATE_LEARNING) -+ if ((p->state == BR_STATE_LEARNING) && skb->protocol != htons(ETH_P_PAE)) - goto drop; - - BR_INPUT_SKB_CB(skb)->brdev = br->dev; diff --git a/target/linux/generic/pending-4.4/642-bridge_port_isolate.patch b/target/linux/generic/pending-4.4/642-bridge_port_isolate.patch deleted file mode 100644 index 02dfea4659..0000000000 --- a/target/linux/generic/pending-4.4/642-bridge_port_isolate.patch +++ /dev/null @@ -1,107 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: [PATCH] bridge: port isolate - -Isolating individual bridge ports ---- ---- a/include/linux/if_bridge.h -+++ b/include/linux/if_bridge.h -@@ -45,6 +45,7 @@ struct br_ip_list { - #define BR_PROXYARP BIT(8) - #define BR_LEARNING_SYNC BIT(9) - #define BR_PROXYARP_WIFI BIT(10) -+#define BR_ISOLATE_MODE BIT(11) - - #define BR_DEFAULT_AGEING_TIME (300 * HZ) - ---- a/net/bridge/br_sysfs_if.c -+++ b/net/bridge/br_sysfs_if.c -@@ -173,6 +173,22 @@ BRPORT_ATTR_FLAG(unicast_flood, BR_FLOOD - BRPORT_ATTR_FLAG(proxyarp, BR_PROXYARP); - BRPORT_ATTR_FLAG(proxyarp_wifi, BR_PROXYARP_WIFI); - -+static ssize_t show_isolate_mode(struct net_bridge_port *p, char *buf) -+{ -+ int isolate_mode = (p->flags & BR_ISOLATE_MODE) ? 1 : 0; -+ return sprintf(buf, "%d\n", isolate_mode); -+} -+static int store_isolate_mode(struct net_bridge_port *p, unsigned long v) -+{ -+ if (v) -+ p->flags |= BR_ISOLATE_MODE; -+ else -+ p->flags &= ~BR_ISOLATE_MODE; -+ return 0; -+} -+static BRPORT_ATTR(isolate_mode, S_IRUGO | S_IWUSR, -+ show_isolate_mode, store_isolate_mode); -+ - #ifdef CONFIG_BRIDGE_IGMP_SNOOPING - static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf) - { -@@ -217,6 +233,7 @@ static const struct brport_attribute *br - #endif - &brport_attr_proxyarp, - &brport_attr_proxyarp_wifi, -+ &brport_attr_isolate_mode, - NULL - }; - ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -192,8 +192,8 @@ int br_handle_frame_finish(struct net *n - - unicast = false; - br->dev->stats.multicast++; -- } else if ((dst = __br_fdb_get(br, dest, vid)) && -- dst->is_local) { -+ } else if ((p->flags & BR_ISOLATE_MODE) || -+ ((dst = __br_fdb_get(br, dest, vid)) && dst->is_local)) { - skb2 = skb; - /* Do not forward the packet since it's local. */ - skb = NULL; ---- a/net/bridge/br_forward.c -+++ b/net/bridge/br_forward.c -@@ -141,7 +141,7 @@ EXPORT_SYMBOL_GPL(br_deliver); - /* called with rcu_read_lock */ - void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0) - { -- if (to && should_deliver(to, skb)) { -+ if (to && should_deliver(to, skb) && !(to->flags & BR_ISOLATE_MODE)) { - if (skb0) - deliver_clone(to, skb, __br_forward); - else -@@ -197,7 +197,7 @@ static void br_flood(struct net_bridge * - struct sk_buff *skb0, - void (*__packet_hook)(const struct net_bridge_port *p, - struct sk_buff *skb), -- bool unicast) -+ bool unicast, bool forward) - { - struct net_bridge_port *p; - struct net_bridge_port *prev; -@@ -205,6 +205,8 @@ static void br_flood(struct net_bridge * - prev = NULL; - - list_for_each_entry_rcu(p, &br->port_list, list) { -+ if (forward && (p->flags & BR_ISOLATE_MODE)) -+ continue; - /* Do not flood unicast traffic to ports that turn it off */ - if (unicast && !(p->flags & BR_FLOOD)) - continue; -@@ -239,14 +241,14 @@ out: - /* called with rcu_read_lock */ - void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb, bool unicast) - { -- br_flood(br, skb, NULL, __br_deliver, unicast); -+ br_flood(br, skb, NULL, __br_deliver, unicast, false); - } - - /* called under bridge lock */ - void br_flood_forward(struct net_bridge *br, struct sk_buff *skb, - struct sk_buff *skb2, bool unicast) - { -- br_flood(br, skb, skb2, __br_forward, unicast); -+ br_flood(br, skb, skb2, __br_forward, unicast, true); - } - - #ifdef CONFIG_BRIDGE_IGMP_SNOOPING diff --git a/target/linux/generic/pending-4.4/645-bridge_multicast_to_unicast.patch b/target/linux/generic/pending-4.4/645-bridge_multicast_to_unicast.patch deleted file mode 100644 index f1c7ab1d9c..0000000000 --- a/target/linux/generic/pending-4.4/645-bridge_multicast_to_unicast.patch +++ /dev/null @@ -1,420 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: [PATCH] bridge: multicast to unicast - -Implement optinal multicast->unicast conversion for igmp snooping ---- ---- a/include/linux/if_bridge.h -+++ b/include/linux/if_bridge.h -@@ -46,6 +46,7 @@ struct br_ip_list { - #define BR_LEARNING_SYNC BIT(9) - #define BR_PROXYARP_WIFI BIT(10) - #define BR_ISOLATE_MODE BIT(11) -+#define BR_MULTICAST_TO_UCAST BIT(12) - - #define BR_DEFAULT_AGEING_TIME (300 * HZ) - ---- a/net/bridge/br_multicast.c -+++ b/net/bridge/br_multicast.c -@@ -42,12 +42,13 @@ static void br_multicast_add_router(stru - static void br_ip4_multicast_leave_group(struct net_bridge *br, - struct net_bridge_port *port, - __be32 group, -- __u16 vid); -+ __u16 vid, -+ const unsigned char *src); - #if IS_ENABLED(CONFIG_IPV6) - static void br_ip6_multicast_leave_group(struct net_bridge *br, - struct net_bridge_port *port, - const struct in6_addr *group, -- __u16 vid); -+ __u16 vid, const unsigned char *src); - #endif - unsigned int br_mdb_rehash_seq; - -@@ -652,7 +653,8 @@ struct net_bridge_port_group *br_multica - struct net_bridge_port *port, - struct br_ip *group, - struct net_bridge_port_group __rcu *next, -- unsigned char state) -+ unsigned char state, -+ const unsigned char *src) - { - struct net_bridge_port_group *p; - -@@ -667,12 +669,33 @@ struct net_bridge_port_group *br_multica - hlist_add_head(&p->mglist, &port->mglist); - setup_timer(&p->timer, br_multicast_port_group_expired, - (unsigned long)p); -+ if ((port->flags & BR_MULTICAST_TO_UCAST) && src) { -+ memcpy(p->eth_addr, src, ETH_ALEN); -+ p->unicast = true; -+ } - return p; - } - -+static bool br_port_group_equal(struct net_bridge_port_group *p, -+ struct net_bridge_port *port, -+ const unsigned char *src) -+{ -+ if (p->port != port) -+ return false; -+ -+ if (!p->unicast) -+ return true; -+ -+ if (!src) -+ return false; -+ -+ return ether_addr_equal(src, p->eth_addr); -+} -+ - static int br_multicast_add_group(struct net_bridge *br, - struct net_bridge_port *port, -- struct br_ip *group) -+ struct br_ip *group, -+ const unsigned char *src) - { - struct net_bridge_mdb_entry *mp; - struct net_bridge_port_group *p; -@@ -699,13 +722,13 @@ static int br_multicast_add_group(struct - for (pp = &mp->ports; - (p = mlock_dereference(*pp, br)) != NULL; - pp = &p->next) { -- if (p->port == port) -+ if (br_port_group_equal(p, port, src)) - goto found; - if ((unsigned long)p->port < (unsigned long)port) - break; - } - -- p = br_multicast_new_port_group(port, group, *pp, MDB_TEMPORARY); -+ p = br_multicast_new_port_group(port, group, *pp, MDB_TEMPORARY, src); - if (unlikely(!p)) - goto err; - rcu_assign_pointer(*pp, p); -@@ -724,7 +747,7 @@ err: - static int br_ip4_multicast_add_group(struct net_bridge *br, - struct net_bridge_port *port, - __be32 group, -- __u16 vid) -+ __u16 vid, const unsigned char *src) - { - struct br_ip br_group; - -@@ -735,14 +758,14 @@ static int br_ip4_multicast_add_group(st - br_group.proto = htons(ETH_P_IP); - br_group.vid = vid; - -- return br_multicast_add_group(br, port, &br_group); -+ return br_multicast_add_group(br, port, &br_group, src); - } - - #if IS_ENABLED(CONFIG_IPV6) - static int br_ip6_multicast_add_group(struct net_bridge *br, - struct net_bridge_port *port, - const struct in6_addr *group, -- __u16 vid) -+ __u16 vid, const unsigned char *src) - { - struct br_ip br_group; - -@@ -753,7 +776,7 @@ static int br_ip6_multicast_add_group(st - br_group.proto = htons(ETH_P_IPV6); - br_group.vid = vid; - -- return br_multicast_add_group(br, port, &br_group); -+ return br_multicast_add_group(br, port, &br_group, src); - } - #endif - -@@ -1003,6 +1026,7 @@ static int br_ip4_multicast_igmp3_report - struct sk_buff *skb, - u16 vid) - { -+ const unsigned char *src; - struct igmpv3_report *ih; - struct igmpv3_grec *grec; - int i; -@@ -1043,12 +1067,13 @@ static int br_ip4_multicast_igmp3_report - continue; - } - -+ src = eth_hdr(skb)->h_source; - if ((type == IGMPV3_CHANGE_TO_INCLUDE || - type == IGMPV3_MODE_IS_INCLUDE) && - ntohs(grec->grec_nsrcs) == 0) { -- br_ip4_multicast_leave_group(br, port, group, vid); -+ br_ip4_multicast_leave_group(br, port, group, vid, src); - } else { -- err = br_ip4_multicast_add_group(br, port, group, vid); -+ err = br_ip4_multicast_add_group(br, port, group, vid, src); - if (err) - break; - } -@@ -1063,6 +1088,7 @@ static int br_ip6_multicast_mld2_report( - struct sk_buff *skb, - u16 vid) - { -+ const unsigned char *src = eth_hdr(skb)->h_source; - struct icmp6hdr *icmp6h; - struct mld2_grec *grec; - int i; -@@ -1114,10 +1140,10 @@ static int br_ip6_multicast_mld2_report( - grec->grec_type == MLD2_MODE_IS_INCLUDE) && - ntohs(*nsrcs) == 0) { - br_ip6_multicast_leave_group(br, port, &grec->grec_mca, -- vid); -+ vid, src); - } else { - err = br_ip6_multicast_add_group(br, port, -- &grec->grec_mca, vid); -+ &grec->grec_mca, vid, src); - if (err) - break; - } -@@ -1432,7 +1458,8 @@ br_multicast_leave_group(struct net_brid - struct net_bridge_port *port, - struct br_ip *group, - struct bridge_mcast_other_query *other_query, -- struct bridge_mcast_own_query *own_query) -+ struct bridge_mcast_own_query *own_query, -+ const unsigned char *src) - { - struct net_bridge_mdb_htable *mdb; - struct net_bridge_mdb_entry *mp; -@@ -1456,7 +1483,7 @@ br_multicast_leave_group(struct net_brid - for (pp = &mp->ports; - (p = mlock_dereference(*pp, br)) != NULL; - pp = &p->next) { -- if (p->port != port) -+ if (!br_port_group_equal(p, port, src)) - continue; - - rcu_assign_pointer(*pp, p->next); -@@ -1519,7 +1546,7 @@ br_multicast_leave_group(struct net_brid - for (p = mlock_dereference(mp->ports, br); - p != NULL; - p = mlock_dereference(p->next, br)) { -- if (p->port != port) -+ if (!br_port_group_equal(p, port, src)) - continue; - - if (!hlist_unhashed(&p->mglist) && -@@ -1537,8 +1564,8 @@ out: - - static void br_ip4_multicast_leave_group(struct net_bridge *br, - struct net_bridge_port *port, -- __be32 group, -- __u16 vid) -+ __be32 group, __u16 vid, -+ const unsigned char *src) - { - struct br_ip br_group; - struct bridge_mcast_own_query *own_query; -@@ -1553,14 +1580,14 @@ static void br_ip4_multicast_leave_group - br_group.vid = vid; - - br_multicast_leave_group(br, port, &br_group, &br->ip4_other_query, -- own_query); -+ own_query, src); - } - - #if IS_ENABLED(CONFIG_IPV6) - static void br_ip6_multicast_leave_group(struct net_bridge *br, - struct net_bridge_port *port, - const struct in6_addr *group, -- __u16 vid) -+ __u16 vid, const unsigned char *src) - { - struct br_ip br_group; - struct bridge_mcast_own_query *own_query; -@@ -1575,7 +1602,7 @@ static void br_ip6_multicast_leave_group - br_group.vid = vid; - - br_multicast_leave_group(br, port, &br_group, &br->ip6_other_query, -- own_query); -+ own_query, src); - } - #endif - -@@ -1584,6 +1611,7 @@ static int br_multicast_ipv4_rcv(struct - struct sk_buff *skb, - u16 vid) - { -+ const unsigned char *src; - struct sk_buff *skb_trimmed = NULL; - struct igmphdr *ih; - int err; -@@ -1600,12 +1628,13 @@ static int br_multicast_ipv4_rcv(struct - - BR_INPUT_SKB_CB(skb)->igmp = 1; - ih = igmp_hdr(skb); -+ src = eth_hdr(skb)->h_source; - - switch (ih->type) { - case IGMP_HOST_MEMBERSHIP_REPORT: - case IGMPV2_HOST_MEMBERSHIP_REPORT: - BR_INPUT_SKB_CB(skb)->mrouters_only = 1; -- err = br_ip4_multicast_add_group(br, port, ih->group, vid); -+ err = br_ip4_multicast_add_group(br, port, ih->group, vid, src); - break; - case IGMPV3_HOST_MEMBERSHIP_REPORT: - err = br_ip4_multicast_igmp3_report(br, port, skb_trimmed, vid); -@@ -1614,7 +1643,7 @@ static int br_multicast_ipv4_rcv(struct - err = br_ip4_multicast_query(br, port, skb_trimmed, vid); - break; - case IGMP_HOST_LEAVE_MESSAGE: -- br_ip4_multicast_leave_group(br, port, ih->group, vid); -+ br_ip4_multicast_leave_group(br, port, ih->group, vid, src); - break; - } - -@@ -1630,6 +1659,7 @@ static int br_multicast_ipv6_rcv(struct - struct sk_buff *skb, - u16 vid) - { -+ const unsigned char *src; - struct sk_buff *skb_trimmed = NULL; - struct mld_msg *mld; - int err; -@@ -1649,8 +1679,9 @@ static int br_multicast_ipv6_rcv(struct - - switch (mld->mld_type) { - case ICMPV6_MGM_REPORT: -+ src = eth_hdr(skb)->h_source; - BR_INPUT_SKB_CB(skb)->mrouters_only = 1; -- err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid); -+ err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid, src); - break; - case ICMPV6_MLD2_REPORT: - err = br_ip6_multicast_mld2_report(br, port, skb_trimmed, vid); -@@ -1659,7 +1690,8 @@ static int br_multicast_ipv6_rcv(struct - err = br_ip6_multicast_query(br, port, skb_trimmed, vid); - break; - case ICMPV6_MGM_REDUCTION: -- br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid); -+ src = eth_hdr(skb)->h_source; -+ br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid, src); - break; - } - ---- a/net/bridge/br_private.h -+++ b/net/bridge/br_private.h -@@ -157,7 +157,9 @@ struct net_bridge_port_group { - struct rcu_head rcu; - struct timer_list timer; - struct br_ip addr; -+ unsigned char eth_addr[ETH_ALEN]; - unsigned char state; -+ bool unicast; - }; - - struct net_bridge_mdb_entry -@@ -555,7 +557,8 @@ void br_multicast_free_pg(struct rcu_hea - struct net_bridge_port_group * - br_multicast_new_port_group(struct net_bridge_port *port, struct br_ip *group, - struct net_bridge_port_group __rcu *next, -- unsigned char state); -+ unsigned char state, -+ const unsigned char *src); - void br_mdb_init(void); - void br_mdb_uninit(void); - void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port, ---- a/net/bridge/br_mdb.c -+++ b/net/bridge/br_mdb.c -@@ -416,7 +416,7 @@ static int br_mdb_add_group(struct net_b - break; - } - -- p = br_multicast_new_port_group(port, group, *pp, state); -+ p = br_multicast_new_port_group(port, group, *pp, state, NULL); - if (unlikely(!p)) - return -ENOMEM; - rcu_assign_pointer(*pp, p); ---- a/net/bridge/br_forward.c -+++ b/net/bridge/br_forward.c -@@ -192,6 +192,34 @@ out: - return p; - } - -+static struct net_bridge_port *maybe_deliver_addr( -+ struct net_bridge_port *prev, struct net_bridge_port *p, -+ struct sk_buff *skb, const unsigned char *addr, -+ void (*__packet_hook)(const struct net_bridge_port *p, -+ struct sk_buff *skb)) -+{ -+ struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev; -+ const unsigned char *src = eth_hdr(skb)->h_source; -+ -+ if (!should_deliver(p, skb)) -+ return prev; -+ -+ /* Even with hairpin, no soliloquies - prevent breaking IPv6 DAD */ -+ if (skb->dev == p->dev && ether_addr_equal(src, addr)) -+ return prev; -+ -+ skb = skb_copy(skb, GFP_ATOMIC); -+ if (!skb) { -+ dev->stats.tx_dropped++; -+ return prev; -+ } -+ -+ memcpy(eth_hdr(skb)->h_dest, addr, ETH_ALEN); -+ __packet_hook(p, skb); -+ -+ return prev; -+} -+ - /* called under bridge lock */ - static void br_flood(struct net_bridge *br, struct sk_buff *skb, - struct sk_buff *skb0, -@@ -264,6 +292,7 @@ static void br_multicast_flood(struct ne - struct net_bridge_port *prev = NULL; - struct net_bridge_port_group *p; - struct hlist_node *rp; -+ const unsigned char *addr; - - rp = rcu_dereference(hlist_first_rcu(&br->router_list)); - p = mdst ? rcu_dereference(mdst->ports) : NULL; -@@ -274,10 +303,19 @@ static void br_multicast_flood(struct ne - rport = rp ? hlist_entry(rp, struct net_bridge_port, rlist) : - NULL; - -- port = (unsigned long)lport > (unsigned long)rport ? -- lport : rport; -- -- prev = maybe_deliver(prev, port, skb, __packet_hook); -+ if ((unsigned long)lport > (unsigned long)rport) { -+ port = lport; -+ addr = p->unicast ? p->eth_addr : NULL; -+ } else { -+ port = rport; -+ addr = NULL; -+ } -+ -+ if (addr) -+ prev = maybe_deliver_addr(prev, port, skb, addr, -+ __packet_hook); -+ else -+ prev = maybe_deliver(prev, port, skb, __packet_hook); - if (IS_ERR(prev)) - goto out; - ---- a/net/bridge/br_sysfs_if.c -+++ b/net/bridge/br_sysfs_if.c -@@ -204,6 +204,7 @@ static BRPORT_ATTR(multicast_router, S_I - store_multicast_router); - - BRPORT_ATTR_FLAG(multicast_fast_leave, BR_MULTICAST_FAST_LEAVE); -+BRPORT_ATTR_FLAG(multicast_to_unicast, BR_MULTICAST_TO_UCAST); - #endif - - static const struct brport_attribute *brport_attrs[] = { -@@ -230,6 +231,7 @@ static const struct brport_attribute *br - #ifdef CONFIG_BRIDGE_IGMP_SNOOPING - &brport_attr_multicast_router, - &brport_attr_multicast_fast_leave, -+ &brport_attr_multicast_to_unicast, - #endif - &brport_attr_proxyarp, - &brport_attr_proxyarp_wifi, diff --git a/target/linux/generic/pending-4.4/651-wireless_mesh_header.patch b/target/linux/generic/pending-4.4/651-wireless_mesh_header.patch deleted file mode 100644 index 17bcb6d24d..0000000000 --- a/target/linux/generic/pending-4.4/651-wireless_mesh_header.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -133,7 +133,7 @@ static inline bool dev_xmit_complete(int - */ - - #if defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) --# if defined(CONFIG_MAC80211_MESH) -+# if 1 || defined(CONFIG_MAC80211_MESH) - # define LL_MAX_HEADER 128 - # else - # define LL_MAX_HEADER 96 diff --git a/target/linux/generic/pending-4.4/653-disable_netlink_trim.patch b/target/linux/generic/pending-4.4/653-disable_netlink_trim.patch deleted file mode 100644 index b11104be9e..0000000000 --- a/target/linux/generic/pending-4.4/653-disable_netlink_trim.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/net/netlink/af_netlink.c -+++ b/net/netlink/af_netlink.c -@@ -1231,24 +1231,7 @@ void netlink_detachskb(struct sock *sk, - - static struct sk_buff *netlink_trim(struct sk_buff *skb, gfp_t allocation) - { -- int delta; -- - WARN_ON(skb->sk != NULL); -- delta = skb->end - skb->tail; -- if (is_vmalloc_addr(skb->head) || delta * 2 < skb->truesize) -- return skb; -- -- if (skb_shared(skb)) { -- struct sk_buff *nskb = skb_clone(skb, allocation); -- if (!nskb) -- return skb; -- consume_skb(skb); -- skb = nskb; -- } -- -- if (!pskb_expand_head(skb, 0, -delta, allocation)) -- skb->truesize -= delta; -- - return skb; - } - diff --git a/target/linux/generic/pending-4.4/655-increase_skb_pad.patch b/target/linux/generic/pending-4.4/655-increase_skb_pad.patch deleted file mode 100644 index 1c8ebacf46..0000000000 --- a/target/linux/generic/pending-4.4/655-increase_skb_pad.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -2177,7 +2177,7 @@ static inline int pskb_network_may_pull( - * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8) - */ - #ifndef NET_SKB_PAD --#define NET_SKB_PAD max(32, L1_CACHE_BYTES) -+#define NET_SKB_PAD max(64, L1_CACHE_BYTES) - #endif - - int ___pskb_trim(struct sk_buff *skb, unsigned int len); diff --git a/target/linux/generic/pending-4.4/660-fq_codel_defaults.patch b/target/linux/generic/pending-4.4/660-fq_codel_defaults.patch deleted file mode 100644 index fbe900891c..0000000000 --- a/target/linux/generic/pending-4.4/660-fq_codel_defaults.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -477,7 +477,7 @@ static int fq_codel_init(struct Qdisc *s - - sch->limit = 10*1024; - q->flows_cnt = 1024; -- q->memory_limit = 32 << 20; /* 32 MBytes */ -+ q->memory_limit = 4 << 20; /* 4 MBytes */ - q->drop_batch_size = 64; - q->quantum = psched_mtu(qdisc_dev(sch)); - q->perturbation = prandom_u32(); diff --git a/target/linux/generic/pending-4.4/661-fq_codel_keep_dropped_stats.patch b/target/linux/generic/pending-4.4/661-fq_codel_keep_dropped_stats.patch deleted file mode 100644 index 3cb950c0db..0000000000 --- a/target/linux/generic/pending-4.4/661-fq_codel_keep_dropped_stats.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -219,7 +219,6 @@ static int fq_codel_enqueue(struct sk_bu - list_add_tail(&flow->flowchain, &q->new_flows); - q->new_flow_count++; - flow->deficit = q->quantum; -- flow->dropped = 0; - } - q->memory_usage += skb->truesize; - memory_limited = q->memory_usage > q->memory_limit; diff --git a/target/linux/generic/pending-4.4/662-use_fq_codel_by_default.patch b/target/linux/generic/pending-4.4/662-use_fq_codel_by_default.patch deleted file mode 100644 index 8d70b82350..0000000000 --- a/target/linux/generic/pending-4.4/662-use_fq_codel_by_default.patch +++ /dev/null @@ -1,95 +0,0 @@ ---- a/net/sched/Kconfig -+++ b/net/sched/Kconfig -@@ -3,8 +3,9 @@ - # - - menuconfig NET_SCHED -- bool "QoS and/or fair queueing" -+ def_bool y - select NET_SCH_FIFO -+ select NET_SCH_FQ_CODEL - ---help--- - When the kernel has several packets to send out over a network - device, it has to decide which ones to send first, which ones to ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -694,7 +694,7 @@ static const struct Qdisc_class_ops fq_c - .walk = fq_codel_walk, - }; - --static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = { -+struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = { - .cl_ops = &fq_codel_class_ops, - .id = "fq_codel", - .priv_size = sizeof(struct fq_codel_sched_data), -@@ -710,6 +710,7 @@ static struct Qdisc_ops fq_codel_qdisc_o - .dump_stats = fq_codel_dump_stats, - .owner = THIS_MODULE, - }; -+EXPORT_SYMBOL(fq_codel_qdisc_ops); - - static int __init fq_codel_module_init(void) - { ---- a/include/net/sch_generic.h -+++ b/include/net/sch_generic.h -@@ -344,6 +344,7 @@ extern struct Qdisc_ops noop_qdisc_ops; - extern struct Qdisc_ops pfifo_fast_ops; - extern struct Qdisc_ops mq_qdisc_ops; - extern struct Qdisc_ops noqueue_qdisc_ops; -+extern struct Qdisc_ops fq_codel_qdisc_ops; - extern const struct Qdisc_ops *default_qdisc_ops; - - struct Qdisc_class_common { ---- a/net/sched/sch_generic.c -+++ b/net/sched/sch_generic.c -@@ -31,7 +31,7 @@ - #include <net/dst.h> - - /* Qdisc to use by default */ --const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops; -+const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops; - EXPORT_SYMBOL(default_qdisc_ops); - - /* Main transmission queue. */ -@@ -731,7 +731,7 @@ static void attach_one_default_qdisc(str - void *_unused) - { - struct Qdisc *qdisc; -- const struct Qdisc_ops *ops = default_qdisc_ops; -+ const struct Qdisc_ops *ops = &fq_codel_qdisc_ops; - - if (dev->priv_flags & IFF_NO_QUEUE) - ops = &noqueue_qdisc_ops; ---- a/net/sched/sch_mq.c -+++ b/net/sched/sch_mq.c -@@ -57,7 +57,7 @@ static int mq_init(struct Qdisc *sch, st - - for (ntx = 0; ntx < dev->num_tx_queues; ntx++) { - dev_queue = netdev_get_tx_queue(dev, ntx); -- qdisc = qdisc_create_dflt(dev_queue, default_qdisc_ops, -+ qdisc = qdisc_create_dflt(dev_queue, &fq_codel_qdisc_ops, - TC_H_MAKE(TC_H_MAJ(sch->handle), - TC_H_MIN(ntx + 1))); - if (!qdisc) ---- a/net/sched/sch_mqprio.c -+++ b/net/sched/sch_mqprio.c -@@ -122,7 +122,7 @@ static int mqprio_init(struct Qdisc *sch - - for (i = 0; i < dev->num_tx_queues; i++) { - dev_queue = netdev_get_tx_queue(dev, i); -- qdisc = qdisc_create_dflt(dev_queue, default_qdisc_ops, -+ qdisc = qdisc_create_dflt(dev_queue, &fq_codel_qdisc_ops, - TC_H_MAKE(TC_H_MAJ(sch->handle), - TC_H_MIN(i + 1))); - if (!qdisc) ---- a/net/sched/sch_api.c -+++ b/net/sched/sch_api.c -@@ -1951,7 +1951,7 @@ static int __init pktsched_init(void) - return err; - } - -- register_qdisc(&pfifo_fast_ops); -+ register_qdisc(&fq_codel_qdisc_ops); - register_qdisc(&pfifo_qdisc_ops); - register_qdisc(&bfifo_qdisc_ops); - register_qdisc(&pfifo_head_drop_qdisc_ops); diff --git a/target/linux/generic/pending-4.4/663-remove_pfifo_fast.patch b/target/linux/generic/pending-4.4/663-remove_pfifo_fast.patch deleted file mode 100644 index 6f72b19358..0000000000 --- a/target/linux/generic/pending-4.4/663-remove_pfifo_fast.patch +++ /dev/null @@ -1,142 +0,0 @@ ---- a/net/sched/sch_generic.c -+++ b/net/sched/sch_generic.c -@@ -438,139 +438,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea - .owner = THIS_MODULE, - }; - --static const u8 prio2band[TC_PRIO_MAX + 1] = { -- 1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1 --}; -- --/* 3-band FIFO queue: old style, but should be a bit faster than -- generic prio+fifo combination. -- */ -- --#define PFIFO_FAST_BANDS 3 -- --/* -- * Private data for a pfifo_fast scheduler containing: -- * - queues for the three band -- * - bitmap indicating which of the bands contain skbs -- */ --struct pfifo_fast_priv { -- u32 bitmap; -- struct sk_buff_head q[PFIFO_FAST_BANDS]; --}; -- --/* -- * Convert a bitmap to the first band number where an skb is queued, where: -- * bitmap=0 means there are no skbs on any band. -- * bitmap=1 means there is an skb on band 0. -- * bitmap=7 means there are skbs on all 3 bands, etc. -- */ --static const int bitmap2band[] = {-1, 0, 1, 0, 2, 0, 1, 0}; -- --static inline struct sk_buff_head *band2list(struct pfifo_fast_priv *priv, -- int band) --{ -- return priv->q + band; --} -- --static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc) --{ -- if (skb_queue_len(&qdisc->q) < qdisc_dev(qdisc)->tx_queue_len) { -- int band = prio2band[skb->priority & TC_PRIO_MAX]; -- struct pfifo_fast_priv *priv = qdisc_priv(qdisc); -- struct sk_buff_head *list = band2list(priv, band); -- -- priv->bitmap |= (1 << band); -- qdisc->q.qlen++; -- return __qdisc_enqueue_tail(skb, qdisc, list); -- } -- -- return qdisc_drop(skb, qdisc); --} -- --static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc) --{ -- struct pfifo_fast_priv *priv = qdisc_priv(qdisc); -- int band = bitmap2band[priv->bitmap]; -- -- if (likely(band >= 0)) { -- struct sk_buff_head *list = band2list(priv, band); -- struct sk_buff *skb = __qdisc_dequeue_head(qdisc, list); -- -- qdisc->q.qlen--; -- if (skb_queue_empty(list)) -- priv->bitmap &= ~(1 << band); -- -- return skb; -- } -- -- return NULL; --} -- --static struct sk_buff *pfifo_fast_peek(struct Qdisc *qdisc) --{ -- struct pfifo_fast_priv *priv = qdisc_priv(qdisc); -- int band = bitmap2band[priv->bitmap]; -- -- if (band >= 0) { -- struct sk_buff_head *list = band2list(priv, band); -- -- return skb_peek(list); -- } -- -- return NULL; --} -- --static void pfifo_fast_reset(struct Qdisc *qdisc) --{ -- int prio; -- struct pfifo_fast_priv *priv = qdisc_priv(qdisc); -- -- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) -- __qdisc_reset_queue(qdisc, band2list(priv, prio)); -- -- priv->bitmap = 0; -- qdisc->qstats.backlog = 0; -- qdisc->q.qlen = 0; --} -- --static int pfifo_fast_dump(struct Qdisc *qdisc, struct sk_buff *skb) --{ -- struct tc_prio_qopt opt = { .bands = PFIFO_FAST_BANDS }; -- -- memcpy(&opt.priomap, prio2band, TC_PRIO_MAX + 1); -- if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt)) -- goto nla_put_failure; -- return skb->len; -- --nla_put_failure: -- return -1; --} -- --static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt) --{ -- int prio; -- struct pfifo_fast_priv *priv = qdisc_priv(qdisc); -- -- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) -- __skb_queue_head_init(band2list(priv, prio)); -- -- /* Can by-pass the queue discipline */ -- qdisc->flags |= TCQ_F_CAN_BYPASS; -- return 0; --} -- --struct Qdisc_ops pfifo_fast_ops __read_mostly = { -- .id = "pfifo_fast", -- .priv_size = sizeof(struct pfifo_fast_priv), -- .enqueue = pfifo_fast_enqueue, -- .dequeue = pfifo_fast_dequeue, -- .peek = pfifo_fast_peek, -- .init = pfifo_fast_init, -- .reset = pfifo_fast_reset, -- .dump = pfifo_fast_dump, -- .owner = THIS_MODULE, --}; -- - static struct lock_class_key qdisc_tx_busylock; - - struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue, diff --git a/target/linux/generic/pending-4.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-4.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch deleted file mode 100644 index 40be5cdff2..0000000000 --- a/target/linux/generic/pending-4.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch +++ /dev/null @@ -1,496 +0,0 @@ -From 775d6fe74d1eaec2ba387535b068dde2dc89de9e Mon Sep 17 00:00:00 2001 -From: Steven Barth <steven@midlink.org> -Date: Thu, 22 May 2014 09:49:05 +0200 -Subject: [PATCH] Add support for MAP-E FMRs (mesh mode) - -MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication -between MAP CEs (mesh mode) without the need to forward such data to a -border relay. This is similar to how 6rd works but for IPv4 over IPv6. - -Signed-off-by: Steven Barth <cyrus@openwrt.org> ---- - include/net/ip6_tunnel.h | 13 ++ - include/uapi/linux/if_tunnel.h | 13 ++ - net/ipv6/ip6_tunnel.c | 276 +++++++++++++++++++++++++++++++++++++++-- - 3 files changed, 291 insertions(+), 11 deletions(-) - ---- a/include/net/ip6_tunnel.h -+++ b/include/net/ip6_tunnel.h -@@ -17,6 +17,18 @@ - /* determine capability on a per-packet basis */ - #define IP6_TNL_F_CAP_PER_PACKET 0x40000 - -+/* IPv6 tunnel FMR */ -+struct __ip6_tnl_fmr { -+ struct __ip6_tnl_fmr *next; /* next fmr in list */ -+ struct in6_addr ip6_prefix; -+ struct in_addr ip4_prefix; -+ -+ __u8 ip6_prefix_len; -+ __u8 ip4_prefix_len; -+ __u8 ea_len; -+ __u8 offset; -+}; -+ - struct __ip6_tnl_parm { - char name[IFNAMSIZ]; /* name of tunnel device */ - int link; /* ifindex of underlying L2 interface */ -@@ -27,6 +39,7 @@ struct __ip6_tnl_parm { - __u32 flags; /* tunnel flags */ - struct in6_addr laddr; /* local tunnel end-point address */ - struct in6_addr raddr; /* remote tunnel end-point address */ -+ struct __ip6_tnl_fmr *fmrs; /* FMRs */ - - __be16 i_flags; - __be16 o_flags; ---- a/include/uapi/linux/if_tunnel.h -+++ b/include/uapi/linux/if_tunnel.h -@@ -57,10 +57,23 @@ enum { - IFLA_IPTUN_ENCAP_FLAGS, - IFLA_IPTUN_ENCAP_SPORT, - IFLA_IPTUN_ENCAP_DPORT, -+ IFLA_IPTUN_FMRS, - __IFLA_IPTUN_MAX, - }; - #define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) - -+enum { -+ IFLA_IPTUN_FMR_UNSPEC, -+ IFLA_IPTUN_FMR_IP6_PREFIX, -+ IFLA_IPTUN_FMR_IP4_PREFIX, -+ IFLA_IPTUN_FMR_IP6_PREFIX_LEN, -+ IFLA_IPTUN_FMR_IP4_PREFIX_LEN, -+ IFLA_IPTUN_FMR_EA_LEN, -+ IFLA_IPTUN_FMR_OFFSET, -+ __IFLA_IPTUN_FMR_MAX, -+}; -+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1) -+ - enum tunnel_encap_types { - TUNNEL_ENCAP_NONE, - TUNNEL_ENCAP_FOU, ---- a/net/ipv6/ip6_tunnel.c -+++ b/net/ipv6/ip6_tunnel.c -@@ -16,6 +16,8 @@ - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * -+ * Changes: -+ * Steven Barth <cyrus@openwrt.org>: MAP-E FMR support - */ - - #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -@@ -71,11 +73,9 @@ static bool log_ecn_error = true; - module_param(log_ecn_error, bool, 0644); - MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN"); - --static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2) -+static u32 HASH(const struct in6_addr *addr) - { -- u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2); -- -- return hash_32(hash, HASH_SIZE_SHIFT); -+ return hash_32(ipv6_addr_hash(addr), HASH_SIZE_SHIFT); - } - - static int ip6_tnl_dev_init(struct net_device *dev); -@@ -139,20 +139,29 @@ static struct net_device_stats *ip6_get_ - static struct ip6_tnl * - ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local) - { -- unsigned int hash = HASH(remote, local); -+ unsigned int hash = HASH(local); - struct ip6_tnl *t; - struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id); - struct in6_addr any; -+ struct __ip6_tnl_fmr *fmr; - - for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) { -- if (ipv6_addr_equal(local, &t->parms.laddr) && -- ipv6_addr_equal(remote, &t->parms.raddr) && -- (t->dev->flags & IFF_UP)) -+ if (!ipv6_addr_equal(local, &t->parms.laddr) || -+ !(t->dev->flags & IFF_UP)) -+ continue; -+ -+ if (ipv6_addr_equal(remote, &t->parms.raddr)) - return t; -+ -+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) { -+ if (ipv6_prefix_equal(remote, &fmr->ip6_prefix, -+ fmr->ip6_prefix_len)) -+ return t; -+ } - } - - memset(&any, 0, sizeof(any)); -- hash = HASH(&any, local); -+ hash = HASH(local); - for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) { - if (ipv6_addr_equal(local, &t->parms.laddr) && - ipv6_addr_any(&t->parms.raddr) && -@@ -160,7 +169,7 @@ ip6_tnl_lookup(struct net *net, const st - return t; - } - -- hash = HASH(remote, &any); -+ hash = HASH(&any); - for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) { - if (ipv6_addr_equal(remote, &t->parms.raddr) && - ipv6_addr_any(&t->parms.laddr) && -@@ -196,7 +205,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n, - - if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) { - prio = 1; -- h = HASH(remote, local); -+ h = HASH(local); - } - return &ip6n->tnls[prio][h]; - } -@@ -369,6 +378,12 @@ ip6_tnl_dev_uninit(struct net_device *de - struct net *net = t->net; - struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id); - -+ while (t->parms.fmrs) { -+ struct __ip6_tnl_fmr *next = t->parms.fmrs->next; -+ kfree(t->parms.fmrs); -+ t->parms.fmrs = next; -+ } -+ - if (dev == ip6n->fb_tnl_dev) - RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL); - else -@@ -765,6 +780,108 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t, - } - EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl); - -+ -+/** -+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR -+ * @dest: destination IPv6 address buffer -+ * @skb: received socket buffer -+ * @fmr: MAP FMR -+ * @xmit: Calculate for xmit or rcv -+ **/ -+static void ip4ip6_fmr_calc(struct in6_addr *dest, -+ const struct iphdr *iph, const uint8_t *end, -+ const struct __ip6_tnl_fmr *fmr, bool xmit) -+{ -+ int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len); -+ u8 *portp = NULL; -+ bool use_dest_addr; -+ const struct iphdr *dsth = iph; -+ -+ if ((u8*)dsth >= end) -+ return; -+ -+ /* find significant IP header */ -+ if (iph->protocol == IPPROTO_ICMP) { -+ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4); -+ if (ih && ((u8*)&ih[1]) <= end && ( -+ ih->type == ICMP_DEST_UNREACH || -+ ih->type == ICMP_SOURCE_QUENCH || -+ ih->type == ICMP_TIME_EXCEEDED || -+ ih->type == ICMP_PARAMETERPROB || -+ ih->type == ICMP_REDIRECT)) -+ dsth = (const struct iphdr*)&ih[1]; -+ } -+ -+ /* in xmit-path use dest port by default and source port only if -+ this is an ICMP reply to something else; vice versa in rcv-path */ -+ use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph); -+ -+ /* get dst port */ -+ if (((u8*)&dsth[1]) <= end && ( -+ dsth->protocol == IPPROTO_UDP || -+ dsth->protocol == IPPROTO_TCP || -+ dsth->protocol == IPPROTO_SCTP || -+ dsth->protocol == IPPROTO_DCCP)) { -+ /* for UDP, TCP, SCTP and DCCP source and dest port -+ follow IPv4 header directly */ -+ portp = ((u8*)dsth) + dsth->ihl * 4; -+ -+ if (use_dest_addr) -+ portp += sizeof(u16); -+ } else if (iph->protocol == IPPROTO_ICMP) { -+ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4); -+ -+ /* use icmp identifier as port */ -+ if (((u8*)&ih) <= end && ( -+ (use_dest_addr && ( -+ ih->type == ICMP_ECHOREPLY || -+ ih->type == ICMP_TIMESTAMPREPLY || -+ ih->type == ICMP_INFO_REPLY || -+ ih->type == ICMP_ADDRESSREPLY)) || -+ (!use_dest_addr && ( -+ ih->type == ICMP_ECHO || -+ ih->type == ICMP_TIMESTAMP || -+ ih->type == ICMP_INFO_REQUEST || -+ ih->type == ICMP_ADDRESS) -+ ))) -+ portp = (u8*)&ih->un.echo.id; -+ } -+ -+ if ((portp && &portp[2] <= end) || psidlen == 0) { -+ int frombyte = fmr->ip6_prefix_len / 8; -+ int fromrem = fmr->ip6_prefix_len % 8; -+ int bytes = sizeof(struct in6_addr) - frombyte; -+ const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr; -+ u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len); -+ u64 t = 0; -+ -+ /* extract PSID from port and add it to eabits */ -+ u16 psidbits = 0; -+ if (psidlen > 0) { -+ psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]); -+ psidbits >>= 16 - psidlen - fmr->offset; -+ psidbits = (u16)(psidbits << (16 - psidlen)); -+ eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen)); -+ } -+ -+ /* rewrite destination address */ -+ *dest = fmr->ip6_prefix; -+ memcpy(&dest->s6_addr[10], addr, sizeof(*addr)); -+ dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen)); -+ -+ if (bytes > sizeof(u64)) -+ bytes = sizeof(u64); -+ -+ /* insert eabits */ -+ memcpy(&t, &dest->s6_addr[frombyte], bytes); -+ t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1) -+ << (64 - fmr->ea_len - fromrem)); -+ t = cpu_to_be64(t | (eabits >> fromrem)); -+ memcpy(&dest->s6_addr[frombyte], &t, bytes); -+ } -+} -+ -+ - /** - * ip6_tnl_rcv - decapsulate IPv6 packet and retransmit it locally - * @skb: received socket buffer -@@ -810,6 +927,26 @@ static int ip6_tnl_rcv(struct sk_buff *s - skb_reset_network_header(skb); - skb->protocol = htons(protocol); - memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); -+ if (protocol == ETH_P_IP && t->parms.fmrs && -+ !ipv6_addr_equal(&ipv6h->saddr, &t->parms.raddr)) { -+ /* Packet didn't come from BR, so lookup FMR */ -+ struct __ip6_tnl_fmr *fmr; -+ struct in6_addr expected = t->parms.raddr; -+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) -+ if (ipv6_prefix_equal(&ipv6h->saddr, -+ &fmr->ip6_prefix, fmr->ip6_prefix_len)) -+ break; -+ -+ /* Check that IPv6 matches IPv4 source to prevent spoofing */ -+ if (fmr) -+ ip4ip6_fmr_calc(&expected, ip_hdr(skb), -+ skb_tail_pointer(skb), fmr, false); -+ -+ if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) { -+ rcu_read_unlock(); -+ goto discard; -+ } -+ } - - __skb_tunnel_rx(skb, t->dev, t->net); - -@@ -1145,6 +1282,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str - __u32 mtu; - u8 tproto; - int err; -+ struct __ip6_tnl_fmr *fmr; - - tproto = ACCESS_ONCE(t->parms.proto); - if ((tproto != IPPROTO_IPV6 && tproto != 0) || -@@ -1175,6 +1313,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) - fl6.flowi6_mark = skb->mark; - -+ /* try to find matching FMR */ -+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) { -+ unsigned mshift = 32 - fmr->ip4_prefix_len; -+ if (ntohl(fmr->ip4_prefix.s_addr) >> mshift == -+ ntohl(ip_hdr(skb)->daddr) >> mshift) -+ break; -+ } -+ -+ /* change dstaddr according to FMR */ -+ if (fmr) -+ ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true); -+ - err = ip6_tnl_xmit2(skb, dev, dsfield, &fl6, encap_limit, &mtu); - if (err != 0) { - if (err == -EMSGSIZE) -@@ -1289,6 +1439,14 @@ ip6_tnl_change(struct ip6_tnl *t, const - t->parms.flowinfo = p->flowinfo; - t->parms.link = p->link; - t->parms.proto = p->proto; -+ -+ while (t->parms.fmrs) { -+ struct __ip6_tnl_fmr *next = t->parms.fmrs->next; -+ kfree(t->parms.fmrs); -+ t->parms.fmrs = next; -+ } -+ t->parms.fmrs = p->fmrs; -+ - dst_cache_reset(&t->dst_cache); - ip6_tnl_link_config(t); - return 0; -@@ -1327,6 +1485,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_ - p->flowinfo = u->flowinfo; - p->link = u->link; - p->proto = u->proto; -+ p->fmrs = NULL; - memcpy(p->name, u->name, sizeof(u->name)); - } - -@@ -1622,6 +1781,15 @@ static int ip6_tnl_validate(struct nlatt - return 0; - } - -+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = { -+ [IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) }, -+ [IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) }, -+ [IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 }, -+ [IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 }, -+ [IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 }, -+ [IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 } -+}; -+ - static void ip6_tnl_netlink_parms(struct nlattr *data[], - struct __ip6_tnl_parm *parms) - { -@@ -1653,6 +1821,46 @@ static void ip6_tnl_netlink_parms(struct - - if (data[IFLA_IPTUN_PROTO]) - parms->proto = nla_get_u8(data[IFLA_IPTUN_PROTO]); -+ -+ if (data[IFLA_IPTUN_FMRS]) { -+ unsigned rem; -+ struct nlattr *fmr; -+ nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) { -+ struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c; -+ struct __ip6_tnl_fmr *nfmr; -+ -+ nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX, -+ fmr, ip6_tnl_fmr_policy); -+ -+ if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL))) -+ continue; -+ -+ nfmr->offset = 6; -+ -+ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX])) -+ nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX], -+ sizeof(nfmr->ip6_prefix)); -+ -+ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX])) -+ nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX], -+ sizeof(nfmr->ip4_prefix)); -+ -+ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN])) -+ nfmr->ip6_prefix_len = nla_get_u8(c); -+ -+ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN])) -+ nfmr->ip4_prefix_len = nla_get_u8(c); -+ -+ if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN])) -+ nfmr->ea_len = nla_get_u8(c); -+ -+ if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET])) -+ nfmr->offset = nla_get_u8(c); -+ -+ nfmr->next = parms->fmrs; -+ parms->fmrs = nfmr; -+ } -+ } - } - - static int ip6_tnl_newlink(struct net *src_net, struct net_device *dev, -@@ -1705,6 +1913,12 @@ static void ip6_tnl_dellink(struct net_d - - static size_t ip6_tnl_get_size(const struct net_device *dev) - { -+ const struct ip6_tnl *t = netdev_priv(dev); -+ struct __ip6_tnl_fmr *c; -+ int fmrs = 0; -+ for (c = t->parms.fmrs; c; c = c->next) -+ ++fmrs; -+ - return - /* IFLA_IPTUN_LINK */ - nla_total_size(4) + -@@ -1722,6 +1936,24 @@ static size_t ip6_tnl_get_size(const str - nla_total_size(4) + - /* IFLA_IPTUN_PROTO */ - nla_total_size(1) + -+ /* IFLA_IPTUN_FMRS */ -+ nla_total_size(0) + -+ ( -+ /* nest */ -+ nla_total_size(0) + -+ /* IFLA_IPTUN_FMR_IP6_PREFIX */ -+ nla_total_size(sizeof(struct in6_addr)) + -+ /* IFLA_IPTUN_FMR_IP4_PREFIX */ -+ nla_total_size(sizeof(struct in_addr)) + -+ /* IFLA_IPTUN_FMR_EA_LEN */ -+ nla_total_size(1) + -+ /* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */ -+ nla_total_size(1) + -+ /* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */ -+ nla_total_size(1) + -+ /* IFLA_IPTUN_FMR_OFFSET */ -+ nla_total_size(1) -+ ) * fmrs + - 0; - } - -@@ -1729,6 +1961,9 @@ static int ip6_tnl_fill_info(struct sk_b - { - struct ip6_tnl *tunnel = netdev_priv(dev); - struct __ip6_tnl_parm *parm = &tunnel->parms; -+ struct __ip6_tnl_fmr *c; -+ int fmrcnt = 0; -+ struct nlattr *fmrs; - - if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) || - nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) || -@@ -1737,8 +1972,27 @@ static int ip6_tnl_fill_info(struct sk_b - nla_put_u8(skb, IFLA_IPTUN_ENCAP_LIMIT, parm->encap_limit) || - nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) || - nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) || -- nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto)) -+ nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) || -+ !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS))) - goto nla_put_failure; -+ -+ for (c = parm->fmrs; c; c = c->next) { -+ struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt); -+ if (!fmr || -+ nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX, -+ sizeof(c->ip6_prefix), &c->ip6_prefix) || -+ nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX, -+ sizeof(c->ip4_prefix), &c->ip4_prefix) || -+ nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) || -+ nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) || -+ nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) || -+ nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset)) -+ goto nla_put_failure; -+ -+ nla_nest_end(skb, fmr); -+ } -+ nla_nest_end(skb, fmrs); -+ - return 0; - - nla_put_failure: -@@ -1762,6 +2016,7 @@ static const struct nla_policy ip6_tnl_p - [IFLA_IPTUN_FLOWINFO] = { .type = NLA_U32 }, - [IFLA_IPTUN_FLAGS] = { .type = NLA_U32 }, - [IFLA_IPTUN_PROTO] = { .type = NLA_U8 }, -+ [IFLA_IPTUN_FMRS] = { .type = NLA_NESTED }, - }; - - static struct rtnl_link_ops ip6_link_ops __read_mostly = { diff --git a/target/linux/generic/pending-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch deleted file mode 100644 index 897efb894d..0000000000 --- a/target/linux/generic/pending-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch +++ /dev/null @@ -1,257 +0,0 @@ -From 1b5aaa4b16f6e6471ab1c07b38068197a1b4c395 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jogo@openwrt.org> -Date: Fri, 24 May 2013 14:40:54 +0200 -Subject: [PATCH 1/2] ipv6: allow rejecting with "source address failed policy" - -RFC6204 L-14 requires rejecting traffic from invalid addresses with -ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/ -egress policy) on the LAN side, so add an appropriate rule for that. - -Signed-off-by: Jonas Gorski <jogo@openwrt.org> ---- - include/net/netns/ipv6.h | 1 + - include/uapi/linux/fib_rules.h | 4 +++ - include/uapi/linux/rtnetlink.h | 1 + - net/ipv4/fib_semantics.c | 4 +++ - net/ipv4/fib_trie.c | 1 + - net/ipv4/ipmr.c | 1 + - net/ipv6/fib6_rules.c | 4 +++ - net/ipv6/ip6mr.c | 2 ++ - net/ipv6/route.c | 58 +++++++++++++++++++++++++++++++++++++++++- - 9 files changed, 75 insertions(+), 1 deletion(-) - ---- a/include/net/netns/ipv6.h -+++ b/include/net/netns/ipv6.h -@@ -63,6 +63,7 @@ struct netns_ipv6 { - unsigned long ip6_rt_last_gc; - #ifdef CONFIG_IPV6_MULTIPLE_TABLES - struct rt6_info *ip6_prohibit_entry; -+ struct rt6_info *ip6_policy_failed_entry; - struct rt6_info *ip6_blk_hole_entry; - struct fib6_table *fib6_local_tbl; - struct fib_rules_ops *fib6_rules_ops; ---- a/include/uapi/linux/fib_rules.h -+++ b/include/uapi/linux/fib_rules.h -@@ -64,6 +64,10 @@ enum { - FR_ACT_BLACKHOLE, /* Drop without notification */ - FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */ - FR_ACT_PROHIBIT, /* Drop with EACCES */ -+ FR_ACT_RES9, -+ FR_ACT_RES10, -+ FR_ACT_RES11, -+ FR_ACT_POLICY_FAILED, /* Drop with EACCES */ - __FR_ACT_MAX, - }; - ---- a/include/uapi/linux/rtnetlink.h -+++ b/include/uapi/linux/rtnetlink.h -@@ -210,6 +210,7 @@ enum { - RTN_THROW, /* Not in this table */ - RTN_NAT, /* Translate this address */ - RTN_XRESOLVE, /* Use external resolver */ -+ RTN_POLICY_FAILED, /* Failed ingress/egress policy */ - __RTN_MAX - }; - ---- a/net/ipv4/fib_semantics.c -+++ b/net/ipv4/fib_semantics.c -@@ -138,6 +138,10 @@ const struct fib_prop fib_props[RTN_MAX - .error = -EINVAL, - .scope = RT_SCOPE_NOWHERE, - }, -+ [RTN_POLICY_FAILED] = { -+ .error = -EACCES, -+ .scope = RT_SCOPE_UNIVERSE, -+ }, - }; - - static void rt_fibinfo_free(struct rtable __rcu **rtp) ---- a/net/ipv4/fib_trie.c -+++ b/net/ipv4/fib_trie.c -@@ -2370,6 +2370,7 @@ static const char *const rtn_type_names[ - [RTN_THROW] = "THROW", - [RTN_NAT] = "NAT", - [RTN_XRESOLVE] = "XRESOLVE", -+ [RTN_POLICY_FAILED] = "POLICY_FAILED", - }; - - static inline const char *rtn_type(char *buf, size_t len, unsigned int t) ---- a/net/ipv4/ipmr.c -+++ b/net/ipv4/ipmr.c -@@ -182,6 +182,7 @@ static int ipmr_rule_action(struct fib_r - case FR_ACT_UNREACHABLE: - return -ENETUNREACH; - case FR_ACT_PROHIBIT: -+ case FR_ACT_POLICY_FAILED: - return -EACCES; - case FR_ACT_BLACKHOLE: - default: ---- a/net/ipv6/fib6_rules.c -+++ b/net/ipv6/fib6_rules.c -@@ -73,6 +73,10 @@ static int fib6_rule_action(struct fib_r - err = -EACCES; - rt = net->ipv6.ip6_prohibit_entry; - goto discard_pkt; -+ case FR_ACT_POLICY_FAILED: -+ err = -EACCES; -+ rt = net->ipv6.ip6_policy_failed_entry; -+ goto discard_pkt; - } - - table = fib6_get_table(net, rule->table); ---- a/net/ipv6/ip6mr.c -+++ b/net/ipv6/ip6mr.c -@@ -167,6 +167,8 @@ static int ip6mr_rule_action(struct fib_ - return -ENETUNREACH; - case FR_ACT_PROHIBIT: - return -EACCES; -+ case FR_ACT_POLICY_FAILED: -+ return -EACCES; - case FR_ACT_BLACKHOLE: - default: - return -EINVAL; ---- a/net/ipv6/route.c -+++ b/net/ipv6/route.c -@@ -90,6 +90,8 @@ static int ip6_pkt_discard(struct sk_bu - static int ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb); - static int ip6_pkt_prohibit(struct sk_buff *skb); - static int ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb); -+static int ip6_pkt_policy_failed(struct sk_buff *skb); -+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb); - static void ip6_link_failure(struct sk_buff *skb); - static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk, - struct sk_buff *skb, u32 mtu); -@@ -297,6 +299,21 @@ static const struct rt6_info ip6_prohibi - .rt6i_ref = ATOMIC_INIT(1), - }; - -+static const struct rt6_info ip6_policy_failed_entry_template = { -+ .dst = { -+ .__refcnt = ATOMIC_INIT(1), -+ .__use = 1, -+ .obsolete = DST_OBSOLETE_FORCE_CHK, -+ .error = -EACCES, -+ .input = ip6_pkt_policy_failed, -+ .output = ip6_pkt_policy_failed_out, -+ }, -+ .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP), -+ .rt6i_protocol = RTPROT_KERNEL, -+ .rt6i_metric = ~(u32) 0, -+ .rt6i_ref = ATOMIC_INIT(1), -+}; -+ - static const struct rt6_info ip6_blk_hole_entry_template = { - .dst = { - .__refcnt = ATOMIC_INIT(1), -@@ -1899,6 +1916,11 @@ static struct rt6_info *ip6_route_info_c - rt->dst.output = ip6_pkt_prohibit_out; - rt->dst.input = ip6_pkt_prohibit; - break; -+ case RTN_POLICY_FAILED: -+ rt->dst.error = -EACCES; -+ rt->dst.output = ip6_pkt_policy_failed_out; -+ rt->dst.input = ip6_pkt_policy_failed; -+ break; - case RTN_THROW: - case RTN_UNREACHABLE: - default: -@@ -2502,6 +2524,17 @@ static int ip6_pkt_prohibit_out(struct n - return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES); - } - -+static int ip6_pkt_policy_failed(struct sk_buff *skb) -+{ -+ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES); -+} -+ -+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb) -+{ -+ skb->dev = skb_dst(skb)->dev; -+ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES); -+} -+ - /* - * Allocate a dst for local (unicast / anycast) address. - */ -@@ -2744,7 +2777,8 @@ static int rtm_to_fib6_config(struct sk_ - if (rtm->rtm_type == RTN_UNREACHABLE || - rtm->rtm_type == RTN_BLACKHOLE || - rtm->rtm_type == RTN_PROHIBIT || -- rtm->rtm_type == RTN_THROW) -+ rtm->rtm_type == RTN_THROW || -+ rtm->rtm_type == RTN_POLICY_FAILED) - cfg->fc_flags |= RTF_REJECT; - - if (rtm->rtm_type == RTN_LOCAL) -@@ -3097,6 +3131,9 @@ static int rt6_fill_node(struct net *net - case -EACCES: - rtm->rtm_type = RTN_PROHIBIT; - break; -+ case -EPERM: -+ rtm->rtm_type = RTN_POLICY_FAILED; -+ break; - case -EAGAIN: - rtm->rtm_type = RTN_THROW; - break; -@@ -3376,6 +3413,8 @@ static int ip6_route_dev_notify(struct n - #ifdef CONFIG_IPV6_MULTIPLE_TABLES - net->ipv6.ip6_prohibit_entry->dst.dev = dev; - net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev); -+ net->ipv6.ip6_policy_failed_entry->dst.dev = dev; -+ net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev); - net->ipv6.ip6_blk_hole_entry->dst.dev = dev; - net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev); - #endif -@@ -3387,6 +3426,7 @@ static int ip6_route_dev_notify(struct n - in6_dev_put(net->ipv6.ip6_null_entry->rt6i_idev); - #ifdef CONFIG_IPV6_MULTIPLE_TABLES - in6_dev_put(net->ipv6.ip6_prohibit_entry->rt6i_idev); -+ in6_dev_put(net->ipv6.ip6_policy_failed_entry->rt6i_idev); - in6_dev_put(net->ipv6.ip6_blk_hole_entry->rt6i_idev); - #endif - } -@@ -3602,6 +3642,17 @@ static int __net_init ip6_route_net_init - net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops; - dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst, - ip6_template_metrics, true); -+ -+ net->ipv6.ip6_policy_failed_entry = -+ kmemdup(&ip6_policy_failed_entry_template, -+ sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL); -+ if (!net->ipv6.ip6_policy_failed_entry) -+ goto out_ip6_blk_hole_entry; -+ net->ipv6.ip6_policy_failed_entry->dst.path = -+ (struct dst_entry *)net->ipv6.ip6_policy_failed_entry; -+ net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops; -+ dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst, -+ ip6_template_metrics, true); - #endif - - net->ipv6.sysctl.flush_delay = 0; -@@ -3620,6 +3671,8 @@ out: - return ret; - - #ifdef CONFIG_IPV6_MULTIPLE_TABLES -+out_ip6_blk_hole_entry: -+ kfree(net->ipv6.ip6_blk_hole_entry); - out_ip6_prohibit_entry: - kfree(net->ipv6.ip6_prohibit_entry); - out_ip6_null_entry: -@@ -3637,6 +3690,7 @@ static void __net_exit ip6_route_net_exi - #ifdef CONFIG_IPV6_MULTIPLE_TABLES - kfree(net->ipv6.ip6_prohibit_entry); - kfree(net->ipv6.ip6_blk_hole_entry); -+ kfree(net->ipv6.ip6_policy_failed_entry); - #endif - dst_entries_destroy(&net->ipv6.ip6_dst_ops); - } -@@ -3710,6 +3764,9 @@ void __init ip6_route_init_special_entri - init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); - init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev; - init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); -+ init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev; -+ init_net.ipv6.ip6_policy_failed_entry->rt6i_idev = -+ in6_dev_get(init_net.loopback_dev); - #endif - } - diff --git a/target/linux/generic/pending-4.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-4.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch deleted file mode 100644 index dafb56cd8b..0000000000 --- a/target/linux/generic/pending-4.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 7749b481ce5d7e232b1f7da5e6b2c44816f51681 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jogo@openwrt.org> -Date: Sun, 19 Jan 2014 20:45:51 +0100 -Subject: [PATCH 2/2] net: provide defines for _POLICY_FAILED until all code is - updated - -Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination -unreachable, conflicting with our name. - -Add appropriate defines to allow our code to build with the new -name until we have updated our local patches for older kernels -and userspace packages. - -Signed-off-by: Jonas Gorski <jogo@openwrt.org> ---- - include/uapi/linux/fib_rules.h | 2 ++ - include/uapi/linux/icmpv6.h | 2 ++ - include/uapi/linux/rtnetlink.h | 2 ++ - 3 files changed, 6 insertions(+) - ---- a/include/uapi/linux/fib_rules.h -+++ b/include/uapi/linux/fib_rules.h -@@ -71,6 +71,8 @@ enum { - __FR_ACT_MAX, - }; - -+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED -+ - #define FR_ACT_MAX (__FR_ACT_MAX - 1) - - #endif ---- a/include/uapi/linux/icmpv6.h -+++ b/include/uapi/linux/icmpv6.h -@@ -118,6 +118,8 @@ struct icmp6hdr { - #define ICMPV6_POLICY_FAIL 5 - #define ICMPV6_REJECT_ROUTE 6 - -+#define ICMPV6_FAILED_POLICY ICMPV6_POLICY_FAIL -+ - /* - * Codes for Time Exceeded - */ ---- a/include/uapi/linux/rtnetlink.h -+++ b/include/uapi/linux/rtnetlink.h -@@ -214,6 +214,8 @@ enum { - __RTN_MAX - }; - -+#define RTN_FAILED_POLICY RTN_POLICY_FAILED -+ - #define RTN_MAX (__RTN_MAX - 1) - - diff --git a/target/linux/generic/pending-4.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-4.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch deleted file mode 100644 index bfe76dbc16..0000000000 --- a/target/linux/generic/pending-4.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch +++ /dev/null @@ -1,160 +0,0 @@ -Subject: NET: skip GRO for foreign MAC addresses - -For network drivers using napi_gro_receive, packets are run through GRO, -even when the destination MAC address does not match, and they're supposed -to be delivered to another host behind a different bridge port. - -This can be very expensive, because for drivers without TSO or scatter- -gather, this can only be undone by copying the skb and checksumming it -again. - -To be able to track foreign MAC addresses in an inexpensive way, create -a mask of changed bits in MAC addresses of upper devices. This allows -handling VLANs and bridge devices with different addresses (as long as -they are not too different). - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/net/core/dev.c -+++ b/net/core/dev.c -@@ -4278,6 +4278,9 @@ static enum gro_result dev_gro_receive(s - enum gro_result ret; - int grow; - -+ if (skb->gro_skip) -+ goto normal; -+ - if (!(skb->dev->features & NETIF_F_GRO)) - goto normal; - -@@ -5444,6 +5447,48 @@ static void __netdev_adjacent_dev_unlink - &upper_dev->adj_list.lower); - } - -+static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr, -+ struct net_device *dev) -+{ -+ int i; -+ -+ for (i = 0; i < dev->addr_len; i++) -+ mask[i] |= addr[i] ^ dev->dev_addr[i]; -+} -+ -+static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev, -+ struct net_device *lower) -+{ -+ struct net_device *cur; -+ struct list_head *iter; -+ -+ netdev_for_each_upper_dev_rcu(dev, cur, iter) { -+ __netdev_addr_mask(mask, cur->dev_addr, lower); -+ __netdev_upper_mask(mask, cur, lower); -+ } -+} -+ -+static void __netdev_update_addr_mask(struct net_device *dev) -+{ -+ unsigned char mask[MAX_ADDR_LEN]; -+ struct net_device *cur; -+ struct list_head *iter; -+ -+ memset(mask, 0, sizeof(mask)); -+ __netdev_upper_mask(mask, dev, dev); -+ memcpy(dev->local_addr_mask, mask, dev->addr_len); -+ -+ netdev_for_each_lower_dev(dev, cur, iter) -+ __netdev_update_addr_mask(cur); -+} -+ -+static void netdev_update_addr_mask(struct net_device *dev) -+{ -+ rcu_read_lock(); -+ __netdev_update_addr_mask(dev); -+ rcu_read_unlock(); -+} -+ - static int __netdev_upper_dev_link(struct net_device *dev, - struct net_device *upper_dev, bool master, - void *private) -@@ -5515,6 +5560,7 @@ static int __netdev_upper_dev_link(struc - goto rollback_lower_mesh; - } - -+ netdev_update_addr_mask(dev); - call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev, - &changeupper_info.info); - return 0; -@@ -5641,6 +5687,7 @@ void netdev_upper_dev_unlink(struct net_ - list_for_each_entry(i, &upper_dev->all_adj_list.upper, list) - __netdev_adjacent_dev_unlink(dev, i->dev, i->ref_nr); - -+ netdev_update_addr_mask(dev); - call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev, - &changeupper_info.info); - } -@@ -6181,6 +6228,7 @@ int dev_set_mac_address(struct net_devic - if (err) - return err; - dev->addr_assign_type = NET_ADDR_SET; -+ netdev_update_addr_mask(dev); - call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); - add_device_randomness(dev->dev_addr, dev->addr_len); - return 0; ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -1639,6 +1639,8 @@ struct net_device { - struct netdev_hw_addr_list mc; - struct netdev_hw_addr_list dev_addrs; - -+ unsigned char local_addr_mask[MAX_ADDR_LEN]; -+ - #ifdef CONFIG_SYSFS - struct kset *queues_kset; - #endif ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -642,7 +642,8 @@ struct sk_buff { - __u8 ipvs_property:1; - __u8 inner_protocol_type:1; - __u8 remcsum_offload:1; -- /* 3 or 5 bit hole */ -+ __u8 gro_skip:1; -+ /* 2 or 4 bit hole */ - - #ifdef CONFIG_NET_SCHED - __u16 tc_index; /* traffic control index */ ---- a/net/ethernet/eth.c -+++ b/net/ethernet/eth.c -@@ -140,6 +140,18 @@ u32 eth_get_headlen(void *data, unsigned - } - EXPORT_SYMBOL(eth_get_headlen); - -+static inline bool -+eth_check_local_mask(const void *addr1, const void *addr2, const void *mask) -+{ -+ const u16 *a1 = addr1; -+ const u16 *a2 = addr2; -+ const u16 *m = mask; -+ -+ return (((a1[0] ^ a2[0]) & ~m[0]) | -+ ((a1[1] ^ a2[1]) & ~m[1]) | -+ ((a1[2] ^ a2[2]) & ~m[2])); -+} -+ - /** - * eth_type_trans - determine the packet's protocol ID. - * @skb: received socket data -@@ -168,8 +180,12 @@ __be16 eth_type_trans(struct sk_buff *sk - skb->pkt_type = PACKET_MULTICAST; - } - else if (unlikely(!ether_addr_equal_64bits(eth->h_dest, -- dev->dev_addr))) -+ dev->dev_addr))) { - skb->pkt_type = PACKET_OTHERHOST; -+ if (eth_check_local_mask(eth->h_dest, dev->dev_addr, -+ dev->local_addr_mask)) -+ skb->gro_skip = 1; -+ } - - /* - * Some variants of DSA tagging don't have an ethertype field diff --git a/target/linux/generic/pending-4.4/681-NET-add-of_get_mac_address_mtd.patch b/target/linux/generic/pending-4.4/681-NET-add-of_get_mac_address_mtd.patch deleted file mode 100644 index 2044872973..0000000000 --- a/target/linux/generic/pending-4.4/681-NET-add-of_get_mac_address_mtd.patch +++ /dev/null @@ -1,128 +0,0 @@ -From: John Crispin <blogic@openwrt.org> -Date: Sun, 27 Jul 2014 09:40:01 +0100 -Subject: NET: add mtd-mac-address support to of_get_mac_address() - -Many embedded devices have information such as mac addresses stored inside mtd -devices. This patch allows us to add a property inside a node describing a -network interface. The new property points at a mtd partition with an offset -where the mac address can be found. - -Signed-off-by: John Crispin <blogic@openwrt.org> -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++ - include/linux/of_net.h | 1 + - 2 files changed, 38 insertions(+) - ---- a/drivers/of/of_net.c -+++ b/drivers/of/of_net.c -@@ -10,6 +10,7 @@ - #include <linux/of_net.h> - #include <linux/phy.h> - #include <linux/export.h> -+#include <linux/mtd/mtd.h> - - /** - * of_get_phy_mode - Get phy mode for given device_node -@@ -38,7 +39,7 @@ int of_get_phy_mode(struct device_node * - } - EXPORT_SYMBOL_GPL(of_get_phy_mode); - --static const void *of_get_mac_addr(struct device_node *np, const char *name) -+static void *of_get_mac_addr(struct device_node *np, const char *name) - { - struct property *pp = of_find_property(np, name, NULL); - -@@ -47,6 +48,73 @@ static const void *of_get_mac_addr(struc - return NULL; - } - -+static const void *of_get_mac_address_mtd(struct device_node *np) -+{ -+#ifdef CONFIG_MTD -+ struct device_node *mtd_np = NULL; -+ struct property *prop; -+ size_t retlen; -+ int size, ret; -+ struct mtd_info *mtd; -+ const char *part; -+ const __be32 *list; -+ phandle phandle; -+ u32 mac_inc = 0; -+ u8 mac[ETH_ALEN]; -+ void *addr; -+ -+ list = of_get_property(np, "mtd-mac-address", &size); -+ if (!list || (size != (2 * sizeof(*list)))) -+ return NULL; -+ -+ phandle = be32_to_cpup(list++); -+ if (phandle) -+ mtd_np = of_find_node_by_phandle(phandle); -+ -+ if (!mtd_np) -+ return NULL; -+ -+ part = of_get_property(mtd_np, "label", NULL); -+ if (!part) -+ part = mtd_np->name; -+ -+ mtd = get_mtd_device_nm(part); -+ if (IS_ERR(mtd)) -+ return NULL; -+ -+ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, mac); -+ put_mtd_device(mtd); -+ -+ if (!of_property_read_u32(np, "mtd-mac-address-increment", &mac_inc)) -+ mac[5] += mac_inc; -+ -+ if (!is_valid_ether_addr(mac)) -+ return NULL; -+ -+ addr = of_get_mac_addr(np, "mac-address"); -+ if (addr) { -+ memcpy(addr, mac, ETH_ALEN); -+ return addr; -+ } -+ -+ prop = kzalloc(sizeof(*prop), GFP_KERNEL); -+ if (!prop) -+ return NULL; -+ -+ prop->name = "mac-address"; -+ prop->length = ETH_ALEN; -+ prop->value = kmemdup(mac, ETH_ALEN, GFP_KERNEL); -+ if (!prop->value || of_add_property(np, prop)) -+ goto free; -+ -+ return prop->value; -+free: -+ kfree(prop->value); -+ kfree(prop); -+#endif -+ return NULL; -+} -+ - /** - * Search the device tree for the best MAC address to use. 'mac-address' is - * checked first, because that is supposed to contain to "most recent" MAC -@@ -64,11 +132,18 @@ static const void *of_get_mac_addr(struc - * addresses. Some older U-Boots only initialized 'local-mac-address'. In - * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists - * but is all zeros. -+ * -+ * If a mtd-mac-address property exists, try to fetch the MAC address from the -+ * specified mtd device, and store it as a 'mac-address' property - */ - const void *of_get_mac_address(struct device_node *np) - { - const void *addr; - -+ addr = of_get_mac_address_mtd(np); -+ if (addr) -+ return addr; -+ - addr = of_get_mac_addr(np, "mac-address"); - if (addr) - return addr; diff --git a/target/linux/generic/pending-4.4/700-swconfig.patch b/target/linux/generic/pending-4.4/700-swconfig.patch deleted file mode 100644 index 122dd446c6..0000000000 --- a/target/linux/generic/pending-4.4/700-swconfig.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -12,6 +12,16 @@ menuconfig PHYLIB - - if PHYLIB - -+config SWCONFIG -+ tristate "Switch configuration API" -+ ---help--- -+ Switch configuration API using netlink. This allows -+ you to configure the VLAN features of certain switches. -+ -+config SWCONFIG_LEDS -+ bool "Switch LED trigger support" -+ depends on (SWCONFIG && LEDS_TRIGGERS) -+ - comment "MII PHY device drivers" - - config AQUANTIA_PHY ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -3,6 +3,7 @@ - libphy-objs := phy.o phy_device.o mdio_bus.o - - obj-$(CONFIG_PHYLIB) += libphy.o -+obj-$(CONFIG_SWCONFIG) += swconfig.o - obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o - obj-$(CONFIG_MARVELL_PHY) += marvell.o - obj-$(CONFIG_DAVICOM_PHY) += davicom.o ---- a/include/uapi/linux/Kbuild -+++ b/include/uapi/linux/Kbuild -@@ -388,6 +388,7 @@ header-y += stddef.h - header-y += string.h - header-y += suspend_ioctls.h - header-y += swab.h -+header-y += switch.h - header-y += synclink.h - header-y += sysctl.h - header-y += sysinfo.h diff --git a/target/linux/generic/pending-4.4/701-phy_extension.patch b/target/linux/generic/pending-4.4/701-phy_extension.patch deleted file mode 100644 index 39b8fd4660..0000000000 --- a/target/linux/generic/pending-4.4/701-phy_extension.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -385,6 +385,50 @@ int phy_ethtool_gset(struct phy_device * - } - EXPORT_SYMBOL(phy_ethtool_gset); - -+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr) -+{ -+ u32 cmd; -+ int tmp; -+ struct ethtool_cmd ecmd = { ETHTOOL_GSET }; -+ struct ethtool_value edata = { ETHTOOL_GLINK }; -+ -+ if (get_user(cmd, (u32 *) useraddr)) -+ return -EFAULT; -+ -+ switch (cmd) { -+ case ETHTOOL_GSET: -+ phy_ethtool_gset(phydev, &ecmd); -+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd))) -+ return -EFAULT; -+ return 0; -+ -+ case ETHTOOL_SSET: -+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd))) -+ return -EFAULT; -+ return phy_ethtool_sset(phydev, &ecmd); -+ -+ case ETHTOOL_NWAY_RST: -+ /* if autoneg is off, it's an error */ -+ tmp = phy_read(phydev, MII_BMCR); -+ if (tmp & BMCR_ANENABLE) { -+ tmp |= (BMCR_ANRESTART); -+ phy_write(phydev, MII_BMCR, tmp); -+ return 0; -+ } -+ return -EINVAL; -+ -+ case ETHTOOL_GLINK: -+ edata.data = (phy_read(phydev, -+ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0; -+ if (copy_to_user(useraddr, &edata, sizeof(edata))) -+ return -EFAULT; -+ return 0; -+ } -+ -+ return -EOPNOTSUPP; -+} -+EXPORT_SYMBOL(phy_ethtool_ioctl); -+ - /** - * phy_mii_ioctl - generic PHY MII ioctl interface - * @phydev: the phy_device struct ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -807,6 +807,7 @@ void phy_start_machine(struct phy_device - void phy_stop_machine(struct phy_device *phydev); - int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); - int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); -+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr); - int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); - int phy_start_interrupts(struct phy_device *phydev); - void phy_print_status(struct phy_device *phydev); diff --git a/target/linux/generic/pending-4.4/702-phy_add_aneg_done_function.patch b/target/linux/generic/pending-4.4/702-phy_add_aneg_done_function.patch deleted file mode 100644 index f20f48f405..0000000000 --- a/target/linux/generic/pending-4.4/702-phy_add_aneg_done_function.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -497,6 +497,12 @@ struct phy_driver { - /* Determines the negotiated speed and duplex */ - int (*read_status)(struct phy_device *phydev); - -+ /* -+ * Update the value in phydev->link to reflect the -+ * current link value -+ */ -+ int (*update_link)(struct phy_device *phydev); -+ - /* Clears any pending interrupts */ - int (*ack_interrupt)(struct phy_device *phydev); - ---- a/drivers/net/phy/phy_device.c -+++ b/drivers/net/phy/phy_device.c -@@ -995,6 +995,9 @@ int genphy_update_link(struct phy_device - { - int status; - -+ if (phydev->drv && phydev->drv->update_link) -+ return phydev->drv->update_link(phydev); -+ - /* Do a fake read */ - status = phy_read(phydev, MII_BMSR); - if (status < 0) diff --git a/target/linux/generic/pending-4.4/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-4.4/703-phy-add-detach-callback-to-struct-phy_driver.patch deleted file mode 100644 index 4ef3b781fa..0000000000 --- a/target/linux/generic/pending-4.4/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/net/phy/phy_device.c -+++ b/drivers/net/phy/phy_device.c -@@ -734,6 +734,9 @@ void phy_detach(struct phy_device *phyde - struct mii_bus *bus; - int i; - -+ if (phydev->drv && phydev->drv->detach) -+ phydev->drv->detach(phydev); -+ - phydev->attached_dev->phydev = NULL; - phydev->attached_dev = NULL; - phy_suspend(phydev); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -515,6 +515,12 @@ struct phy_driver { - */ - int (*did_interrupt)(struct phy_device *phydev); - -+ /* -+ * Called before an ethernet device is detached -+ * from the PHY. -+ */ -+ void (*detach)(struct phy_device *phydev); -+ - /* Clears up any memory if needed */ - void (*remove)(struct phy_device *phydev); - diff --git a/target/linux/generic/pending-4.4/710-phy-add-mdio_register_board_info.patch b/target/linux/generic/pending-4.4/710-phy-add-mdio_register_board_info.patch deleted file mode 100644 index d78f3d48a7..0000000000 --- a/target/linux/generic/pending-4.4/710-phy-add-mdio_register_board_info.patch +++ /dev/null @@ -1,193 +0,0 @@ ---- a/drivers/net/phy/mdio_bus.c -+++ b/drivers/net/phy/mdio_bus.c -@@ -38,6 +38,8 @@ - - #include <asm/irq.h> - -+#include "mdio-boardinfo.h" -+ - /** - * mdiobus_alloc_size - allocate a mii_bus structure - * @size: extra amount of memory to allocate for private storage. -@@ -346,9 +348,21 @@ void mdiobus_free(struct mii_bus *bus) - } - EXPORT_SYMBOL(mdiobus_free); - -+static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus, -+ struct phy_device *phydev, -+ struct mdio_board_info *bi) -+{ -+ if (strcmp(bus->id, bi->bus_id) || -+ bi->phy_addr != phydev->addr) -+ return; -+ -+ phydev->dev.platform_data = (void *) bi->platform_data; -+} -+ - struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) - { - struct phy_device *phydev; -+ struct mdio_board_entry *be; - int err; - - phydev = get_phy_device(bus, addr, false); -@@ -361,6 +375,12 @@ struct phy_device *mdiobus_scan(struct m - */ - of_mdiobus_link_phydev(bus, phydev); - -+ mutex_lock(&__mdio_board_lock); -+ list_for_each_entry(be, &__mdio_board_list, list) -+ mdiobus_setup_phydev_from_boardinfo(bus, phydev, -+ &be->board_info); -+ mutex_unlock(&__mdio_board_lock); -+ - err = phy_device_register(phydev); - if (err) { - phy_device_free(phydev); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -846,6 +846,23 @@ void mdio_bus_exit(void); - - extern struct bus_type mdio_bus_type; - -+struct mdio_board_info { -+ const char *bus_id; -+ int phy_addr; -+ -+ const void *platform_data; -+}; -+ -+#ifdef CONFIG_MDIO_BOARDINFO -+int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n); -+#else -+static inline int -+mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n) -+{ -+ return 0; -+} -+#endif -+ - /** - * module_phy_driver() - Helper macro for registering PHY drivers - * @__phy_drivers: array of PHY drivers to register ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -12,6 +12,10 @@ menuconfig PHYLIB - - if PHYLIB - -+config MDIO_BOARDINFO -+ bool -+ default y -+ - config SWCONFIG - tristate "Switch configuration API" - ---help--- ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -2,6 +2,8 @@ - - libphy-objs := phy.o phy_device.o mdio_bus.o - -+obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o -+ - obj-$(CONFIG_PHYLIB) += libphy.o - obj-$(CONFIG_SWCONFIG) += swconfig.o - obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o ---- /dev/null -+++ b/drivers/net/phy/mdio-boardinfo.c -@@ -0,0 +1,58 @@ -+/* -+ * mdio-boardinfo.c - collect pre-declarations of PHY devices -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/phy.h> -+#include <linux/slab.h> -+#include <linux/export.h> -+#include <linux/mutex.h> -+#include <linux/phy.h> -+ -+#include "mdio-boardinfo.h" -+ -+/* -+ * These symbols are exported ONLY FOR the mdio_bus component. -+ * No other users will be supported. -+ */ -+ -+LIST_HEAD(__mdio_board_list); -+EXPORT_SYMBOL_GPL(__mdio_board_list); -+ -+DEFINE_MUTEX(__mdio_board_lock); -+EXPORT_SYMBOL_GPL(__mdio_board_lock); -+ -+/** -+ * mdio_register_board_info - register PHY devices for a given board -+ * @info: array of chip descriptors -+ * @n: how many descriptors are provided -+ * Context: can sleep -+ * -+ * The board info passed can safely be __initdata ... but be careful of -+ * any embedded pointers (platform_data, etc), they're copied as-is. -+ */ -+int __init -+mdiobus_register_board_info(struct mdio_board_info const *info, unsigned n) -+{ -+ struct mdio_board_entry *be; -+ int i; -+ -+ be = kzalloc(n * sizeof(*be), GFP_KERNEL); -+ if (!be) -+ return -ENOMEM; -+ -+ for (i = 0; i < n; i++, be++, info++) { -+ memcpy(&be->board_info, info, sizeof(*info)); -+ mutex_lock(&__mdio_board_lock); -+ list_add_tail(&be->list, &__mdio_board_list); -+ mutex_unlock(&__mdio_board_lock); -+ } -+ -+ return 0; -+} ---- /dev/null -+++ b/drivers/net/phy/mdio-boardinfo.h -@@ -0,0 +1,22 @@ -+/* -+ * mdio-boardinfo.h - boardinfo interface internal to the mdio_bus component -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#include <linux/mutex.h> -+ -+struct mdio_board_entry { -+ struct list_head list; -+ struct mdio_board_info board_info; -+}; -+ -+/* __mdio_board_lock protects __mdio_board_list -+ * only mdio_bus components are allowed to use these symbols. -+ */ -+extern struct mutex __mdio_board_lock; -+extern struct list_head __mdio_board_list; ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -16,7 +16,7 @@ obj-$(CONFIG_MII) += mii.o - obj-$(CONFIG_MDIO) += mdio.o - obj-$(CONFIG_NET) += Space.o loopback.o - obj-$(CONFIG_NETCONSOLE) += netconsole.o --obj-$(CONFIG_PHYLIB) += phy/ -+obj-y += phy/ - obj-$(CONFIG_RIONET) += rionet.o - obj-$(CONFIG_NET_TEAM) += team/ - obj-$(CONFIG_TUN) += tun.o diff --git a/target/linux/generic/pending-4.4/720-phy_adm6996.patch b/target/linux/generic/pending-4.4/720-phy_adm6996.patch deleted file mode 100644 index bf939e893c..0000000000 --- a/target/linux/generic/pending-4.4/720-phy_adm6996.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -175,6 +175,13 @@ config LANTIQ_PHY - ---help--- - Supports the 11G and 22F PHYs. - -+config ADM6996_PHY -+ tristate "Driver for ADM6996 switches" -+ select SWCONFIG -+ ---help--- -+ Currently supports the ADM6996FC and ADM6996M switches. -+ Support for FC is very limited. -+ - config FIXED_PHY - tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o - obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o - obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o - obj-$(CONFIG_ICPLUS_PHY) += icplus.o -+obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o diff --git a/target/linux/generic/pending-4.4/721-phy_packets.patch b/target/linux/generic/pending-4.4/721-phy_packets.patch deleted file mode 100644 index 39dc5ccbfc..0000000000 --- a/target/linux/generic/pending-4.4/721-phy_packets.patch +++ /dev/null @@ -1,161 +0,0 @@ ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -1297,6 +1297,7 @@ enum netdev_priv_flags { - IFF_NO_QUEUE = 1<<21, - IFF_OPENVSWITCH = 1<<22, - IFF_L3MDEV_SLAVE = 1<<23, -+ IFF_NO_IP_ALIGN = 1<<24, - }; - - #define IFF_802_1Q_VLAN IFF_802_1Q_VLAN -@@ -1323,6 +1324,7 @@ enum netdev_priv_flags { - #define IFF_NO_QUEUE IFF_NO_QUEUE - #define IFF_OPENVSWITCH IFF_OPENVSWITCH - #define IFF_L3MDEV_SLAVE IFF_L3MDEV_SLAVE -+#define IFF_NO_IP_ALIGN IFF_NO_IP_ALIGN - - /** - * struct net_device - The DEVICE structure. -@@ -1603,6 +1605,11 @@ struct net_device { - const struct l3mdev_ops *l3mdev_ops; - #endif - -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb); -+ struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb); -+#endif -+ - const struct header_ops *header_ops; - - unsigned int flags; -@@ -1670,6 +1677,10 @@ struct net_device { - struct mpls_dev __rcu *mpls_ptr; - #endif - -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ void *phy_ptr; /* PHY device specific data */ -+#endif -+ - /* - * Cache lines mostly used on receive path (including eth_type_trans()) - */ ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -2208,6 +2208,10 @@ static inline int pskb_trim(struct sk_bu - return (len < skb->len) ? __pskb_trim(skb, len) : 0; - } - -+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, -+ unsigned int length, gfp_t gfp); -+ -+ - /** - * pskb_trim_unique - remove end from a paged unique (not cloned) buffer - * @skb: buffer to alter -@@ -2312,16 +2316,6 @@ static inline struct sk_buff *dev_alloc_ - } - - --static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, -- unsigned int length, gfp_t gfp) --{ -- struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp); -- -- if (NET_IP_ALIGN && skb) -- skb_reserve(skb, NET_IP_ALIGN); -- return skb; --} -- - static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev, - unsigned int length) - { ---- a/net/Kconfig -+++ b/net/Kconfig -@@ -25,6 +25,12 @@ menuconfig NET - - if NET - -+config ETHERNET_PACKET_MANGLE -+ bool -+ help -+ This option can be selected by phy drivers that need to mangle -+ packets going in or out of an ethernet device. -+ - config WANT_COMPAT_NETLINK_MESSAGES - bool - help ---- a/net/core/dev.c -+++ b/net/core/dev.c -@@ -2754,10 +2754,20 @@ static int xmit_one(struct sk_buff *skb, - if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all)) - dev_queue_xmit_nit(skb, dev); - -- len = skb->len; -- trace_net_dev_start_xmit(skb, dev); -- rc = netdev_start_xmit(skb, dev, txq, more); -- trace_net_dev_xmit(skb, rc, dev, len); -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ if (!dev->eth_mangle_tx || -+ (skb = dev->eth_mangle_tx(dev, skb)) != NULL) -+#else -+ if (1) -+#endif -+ { -+ len = skb->len; -+ trace_net_dev_start_xmit(skb, dev); -+ rc = netdev_start_xmit(skb, dev, txq, more); -+ trace_net_dev_xmit(skb, rc, dev, len); -+ } else { -+ rc = NETDEV_TX_OK; -+ } - - return rc; - } ---- a/net/core/skbuff.c -+++ b/net/core/skbuff.c -@@ -63,6 +63,7 @@ - #include <linux/errqueue.h> - #include <linux/prefetch.h> - #include <linux/if_vlan.h> -+#include <linux/if.h> - - #include <net/protocol.h> - #include <net/dst.h> -@@ -520,6 +521,22 @@ skb_fail: - } - EXPORT_SYMBOL(__napi_alloc_skb); - -+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, -+ unsigned int length, gfp_t gfp) -+{ -+ struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp); -+ -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN)) -+ return skb; -+#endif -+ -+ if (NET_IP_ALIGN && skb) -+ skb_reserve(skb, NET_IP_ALIGN); -+ return skb; -+} -+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align); -+ - void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off, - int size, unsigned int truesize) - { ---- a/net/ethernet/eth.c -+++ b/net/ethernet/eth.c -@@ -168,6 +168,12 @@ __be16 eth_type_trans(struct sk_buff *sk - const struct ethhdr *eth; - - skb->dev = dev; -+ -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ if (dev->eth_mangle_rx) -+ dev->eth_mangle_rx(dev, skb); -+#endif -+ - skb_reset_mac_header(skb); - - eth = (struct ethhdr *)skb->data; diff --git a/target/linux/generic/pending-4.4/722-phy_mvswitch.patch b/target/linux/generic/pending-4.4/722-phy_mvswitch.patch deleted file mode 100644 index 37ec7d9e5d..0000000000 --- a/target/linux/generic/pending-4.4/722-phy_mvswitch.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -182,6 +182,10 @@ config ADM6996_PHY - Currently supports the ADM6996FC and ADM6996M switches. - Support for FC is very limited. - -+config MVSWITCH_PHY -+ tristate "Driver for Marvell 88E6060 switches" -+ select ETHERNET_PACKET_MANGLE -+ - config FIXED_PHY - tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -23,6 +23,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o - obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o - obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o -+obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o diff --git a/target/linux/generic/pending-4.4/723-phy_ip175c.patch b/target/linux/generic/pending-4.4/723-phy_ip175c.patch deleted file mode 100644 index 5eb10bb30f..0000000000 --- a/target/linux/generic/pending-4.4/723-phy_ip175c.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -186,6 +186,10 @@ config MVSWITCH_PHY - tristate "Driver for Marvell 88E6060 switches" - select ETHERNET_PACKET_MANGLE - -+config IP17XX_PHY -+ tristate "Driver for IC+ IP17xx switches" -+ select SWCONFIG -+ - config FIXED_PHY - tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygn - obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o -+obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o diff --git a/target/linux/generic/pending-4.4/724-phy_ar8216.patch b/target/linux/generic/pending-4.4/724-phy_ar8216.patch deleted file mode 100644 index 8cd0034334..0000000000 --- a/target/linux/generic/pending-4.4/724-phy_ar8216.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -190,6 +190,11 @@ config IP17XX_PHY - tristate "Driver for IC+ IP17xx switches" - select SWCONFIG - -+config AR8216_PHY -+ tristate "Driver for Atheros AR8216 switches" -+ select ETHERNET_PACKET_MANGLE -+ select SWCONFIG -+ - config FIXED_PHY - tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o -+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/pending-4.4/725-phy_rtl8306.patch b/target/linux/generic/pending-4.4/725-phy_rtl8306.patch deleted file mode 100644 index 2bf2760764..0000000000 --- a/target/linux/generic/pending-4.4/725-phy_rtl8306.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -195,6 +195,10 @@ config AR8216_PHY - select ETHERNET_PACKET_MANGLE - select SWCONFIG - -+config RTL8306_PHY -+ tristate "Driver for Realtek RTL8306S switches" -+ select SWCONFIG -+ - config FIXED_PHY - tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o -+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/pending-4.4/726-phy_rtl8366.patch b/target/linux/generic/pending-4.4/726-phy_rtl8366.patch deleted file mode 100644 index 53e967b82f..0000000000 --- a/target/linux/generic/pending-4.4/726-phy_rtl8366.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -299,6 +299,30 @@ config MDIO_BCM_IPROC - This module provides a driver for the MDIO busses found in the - Broadcom iProc SoC's. - -+config RTL8366_SMI -+ tristate "Driver for the RTL8366 SMI interface" -+ depends on GPIOLIB -+ ---help--- -+ This module implements the SMI interface protocol which is used -+ by some RTL8366 ethernet switch devices via the generic GPIO API. -+ -+if RTL8366_SMI -+ -+config RTL8366_SMI_DEBUG_FS -+ bool "RTL8366 SMI interface debugfs support" -+ depends on DEBUG_FS -+ default n -+ -+config RTL8366S_PHY -+ tristate "Driver for the Realtek RTL8366S switch" -+ select SWCONFIG -+ -+config RTL8366RB_PHY -+ tristate "Driver for the Realtek RTL8366RB switch" -+ select SWCONFIG -+ -+endif # RTL8366_SMI -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -28,6 +28,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o - obj-$(CONFIG_RTL8306_PHY) += rtl8306.o -+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o -+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o -+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/pending-4.4/727-phy-rtl8367.patch b/target/linux/generic/pending-4.4/727-phy-rtl8367.patch deleted file mode 100644 index 9fa8c8fc2a..0000000000 --- a/target/linux/generic/pending-4.4/727-phy-rtl8367.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -321,6 +321,10 @@ config RTL8366RB_PHY - tristate "Driver for the Realtek RTL8366RB switch" - select SWCONFIG - -+config RTL8367_PHY -+ tristate "Driver for the Realtek RTL8367R/M switches" -+ select SWCONFIG -+ - endif # RTL8366_SMI - - endif # PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o - obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o - obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o -+obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/pending-4.4/728-phy-rtl8367b.patch b/target/linux/generic/pending-4.4/728-phy-rtl8367b.patch deleted file mode 100644 index 12d7fcad90..0000000000 --- a/target/linux/generic/pending-4.4/728-phy-rtl8367b.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -325,6 +325,10 @@ config RTL8367_PHY - tristate "Driver for the Realtek RTL8367R/M switches" - select SWCONFIG - -+config RTL8367B_PHY -+ tristate "Driver fot the Realtek RTL8367R-VB switch" -+ select SWCONFIG -+ - endif # RTL8366_SMI - - endif # PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi - obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_RTL8367_PHY) += rtl8367.o -+obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/pending-4.4/729-phy-tantos.patch b/target/linux/generic/pending-4.4/729-phy-tantos.patch deleted file mode 100644 index 3f18c83c42..0000000000 --- a/target/linux/generic/pending-4.4/729-phy-tantos.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -336,3 +336,8 @@ endif # PHYLIB - config MICREL_KS8995MA - tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" - depends on SPI -+ -+config PSB6970_PHY -+ tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch" -+ select SWCONFIG -+ select ETHERNET_PACKET_MANGLE ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb - obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_PSB6970_PHY) += psb6970.o - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/generic/pending-4.4/730-phy_b53.patch b/target/linux/generic/pending-4.4/730-phy_b53.patch deleted file mode 100644 index 4d5ea7a754..0000000000 --- a/target/linux/generic/pending-4.4/730-phy_b53.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -331,6 +331,8 @@ config RTL8367B_PHY - - endif # RTL8366_SMI - -+source "drivers/net/phy/b53/Kconfig" -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -35,6 +35,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_PSB6970_PHY) += psb6970.o -+obj-$(CONFIG_SWCONFIG_B53) += b53/ - obj-$(CONFIG_FIXED_PHY) += fixed_phy.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/generic/pending-4.4/732-phy-ar8216-led-support.patch b/target/linux/generic/pending-4.4/732-phy-ar8216-led-support.patch deleted file mode 100644 index 799ea494a0..0000000000 --- a/target/linux/generic/pending-4.4/732-phy-ar8216-led-support.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -195,6 +195,10 @@ config AR8216_PHY - select ETHERNET_PACKET_MANGLE - select SWCONFIG - -+config AR8216_PHY_LEDS -+ bool "Atheros AR8216 switch LED support" -+ depends on (AR8216_PHY && LEDS_CLASS) -+ - config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG diff --git a/target/linux/generic/pending-4.4/733-phy_mvsw61xx.patch b/target/linux/generic/pending-4.4/733-phy_mvsw61xx.patch deleted file mode 100644 index 4daa9e8c87..0000000000 --- a/target/linux/generic/pending-4.4/733-phy_mvsw61xx.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -186,6 +186,10 @@ config MVSWITCH_PHY - tristate "Driver for Marvell 88E6060 switches" - select ETHERNET_PACKET_MANGLE - -+config MVSW61XX_PHY -+ tristate "Driver for Marvell 88E6171/6172 switches" -+ select SWCONFIG -+ - config IP17XX_PHY - tristate "Driver for IC+ IP17xx switches" - select SWCONFIG ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygn - obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o -+obj-$(CONFIG_MVSW61XX_PHY) += mvsw61xx.o - obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o diff --git a/target/linux/generic/pending-4.4/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.4/734-net-phy-at803x-allow-to-configure-via-pdata.patch deleted file mode 100644 index 53abcc33ed..0000000000 --- a/target/linux/generic/pending-4.4/734-net-phy-at803x-allow-to-configure-via-pdata.patch +++ /dev/null @@ -1,180 +0,0 @@ ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -12,12 +12,14 @@ - */ - - #include <linux/phy.h> -+#include <linux/mdio.h> - #include <linux/module.h> - #include <linux/string.h> - #include <linux/netdevice.h> - #include <linux/etherdevice.h> - #include <linux/of_gpio.h> - #include <linux/gpio/consumer.h> -+#include <linux/platform_data/phy-at803x.h> - - #define AT803X_INTR_ENABLE 0x12 - #define AT803X_INTR_STATUS 0x13 -@@ -34,8 +36,16 @@ - #define AT803X_INER 0x0012 - #define AT803X_INER_INIT 0xec00 - #define AT803X_INSR 0x0013 -+ -+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D -+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3 -+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12 -+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8) -+ - #define AT803X_DEBUG_ADDR 0x1D - #define AT803X_DEBUG_DATA 0x1E -+#define AT803X_DBG0_REG 0x00 -+#define AT803X_DEBUG_RGMII_RX_CLK_DLY BIT(8) - #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05 - #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8) - -@@ -50,6 +60,7 @@ MODULE_LICENSE("GPL"); - struct at803x_priv { - bool phy_reset:1; - struct gpio_desc *gpiod_reset; -+ int prev_speed; - }; - - struct at803x_context { -@@ -61,6 +72,43 @@ struct at803x_context { - u16 led_control; - }; - -+static u16 -+at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set) -+{ -+ struct mii_bus *bus = phydev->bus; -+ int val; -+ -+ mutex_lock(&bus->mdio_lock); -+ -+ bus->write(bus, phydev->addr, AT803X_DEBUG_ADDR, reg); -+ val = bus->read(bus, phydev->addr, AT803X_DEBUG_DATA); -+ if (val < 0) { -+ val = 0xffff; -+ goto out; -+ } -+ -+ val &= ~clear; -+ val |= set; -+ bus->write(bus, phydev->addr, AT803X_DEBUG_DATA, val); -+ -+out: -+ mutex_unlock(&bus->mdio_lock); -+ return val; -+} -+ -+static inline void -+at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set) -+{ -+ at803x_dbg_reg_rmw(phydev, reg, 0, set); -+} -+ -+static inline void -+at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear) -+{ -+ at803x_dbg_reg_rmw(phydev, reg, clear, 0); -+} -+ -+ - /* save relevant PHY registers to private copy */ - static void at803x_context_save(struct phy_device *phydev, - struct at803x_context *context) -@@ -209,8 +257,16 @@ static int at803x_probe(struct phy_devic - return 0; - } - -+static void at803x_disable_smarteee(struct phy_device *phydev) -+{ -+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3, -+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT); -+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); -+} -+ - static int at803x_config_init(struct phy_device *phydev) - { -+ struct at803x_platform_data *pdata; - int ret; - - ret = genphy_config_init(phydev); -@@ -228,6 +284,26 @@ static int at803x_config_init(struct phy - return ret; - } - -+ pdata = dev_get_platdata(&phydev->dev); -+ if (pdata) { -+ if (pdata->disable_smarteee) -+ at803x_disable_smarteee(phydev); -+ -+ if (pdata->enable_rgmii_rx_delay) -+ at803x_dbg_reg_set(phydev, AT803X_DBG0_REG, -+ AT803X_DEBUG_RGMII_RX_CLK_DLY); -+ else -+ at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG, -+ AT803X_DEBUG_RGMII_RX_CLK_DLY); -+ -+ if (pdata->enable_rgmii_tx_delay) -+ at803x_dbg_reg_set(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL, -+ AT803X_DEBUG_RGMII_TX_CLK_DLY); -+ else -+ at803x_dbg_reg_clr(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL, -+ AT803X_DEBUG_RGMII_TX_CLK_DLY); -+ } -+ - return 0; - } - -@@ -259,6 +335,8 @@ static int at803x_config_intr(struct phy - static void at803x_link_change_notify(struct phy_device *phydev) - { - struct at803x_priv *priv = phydev->priv; -+ struct at803x_platform_data *pdata; -+ pdata = dev_get_platdata(&phydev->dev); - - /* - * Conduct a hardware reset for AT8030 every time a link loss is -@@ -289,6 +367,26 @@ static void at803x_link_change_notify(st - priv->phy_reset = false; - } - } -+ if (pdata && pdata->fixup_rgmii_tx_delay && -+ phydev->speed != priv->prev_speed) { -+ switch (phydev->speed) { -+ case SPEED_10: -+ case SPEED_100: -+ at803x_dbg_reg_set(phydev, -+ AT803X_DEBUG_SYSTEM_MODE_CTRL, -+ AT803X_DEBUG_RGMII_TX_CLK_DLY); -+ break; -+ case SPEED_1000: -+ at803x_dbg_reg_clr(phydev, -+ AT803X_DEBUG_SYSTEM_MODE_CTRL, -+ AT803X_DEBUG_RGMII_TX_CLK_DLY); -+ break; -+ default: -+ break; -+ } -+ -+ priv->prev_speed = phydev->speed; -+ } - } - - static struct phy_driver at803x_driver[] = { ---- /dev/null -+++ b/include/linux/platform_data/phy-at803x.h -@@ -0,0 +1,11 @@ -+#ifndef _PHY_AT803X_PDATA_H -+#define _PHY_AT803X_PDATA_H -+ -+struct at803x_platform_data { -+ int disable_smarteee:1; -+ int enable_rgmii_tx_delay:1; -+ int enable_rgmii_rx_delay:1; -+ int fixup_rgmii_tx_delay:1; -+}; -+ -+#endif /* _PHY_AT803X_PDATA_H */ diff --git a/target/linux/generic/pending-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch deleted file mode 100644 index 60de6b4f7d..0000000000 --- a/target/linux/generic/pending-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch +++ /dev/null @@ -1,96 +0,0 @@ ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -36,6 +36,9 @@ - #define AT803X_INER 0x0012 - #define AT803X_INER_INIT 0xec00 - #define AT803X_INSR 0x0013 -+#define AT803X_REG_CHIP_CONFIG 0x1f -+#define AT803X_BT_BX_REG_SEL 0x8000 -+#define AT803X_SGMII_ANEG_EN 0x1000 - - #define AT803X_PCS_SMART_EEE_CTRL3 0x805D - #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3 -@@ -49,9 +52,10 @@ - #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05 - #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8) - --#define ATH8030_PHY_ID 0x004dd076 --#define ATH8031_PHY_ID 0x004dd074 --#define ATH8035_PHY_ID 0x004dd072 -+#define AT803X_PHY_ID_MASK 0xffffffef -+#define ATH8030_PHY_ID 0x004dd076 -+#define ATH8031_PHY_ID 0x004dd074 -+#define ATH8035_PHY_ID 0x004dd072 - - MODULE_DESCRIPTION("Atheros 803x PHY driver"); - MODULE_AUTHOR("Matus Ujhelyi"); -@@ -268,6 +272,27 @@ static int at803x_config_init(struct phy - { - struct at803x_platform_data *pdata; - int ret; -+ u32 v; -+ -+ if (phydev->drv->phy_id == ATH8031_PHY_ID && -+ phydev->interface == PHY_INTERFACE_MODE_SGMII) -+ { -+ v = phy_read(phydev, AT803X_REG_CHIP_CONFIG); -+ /* select SGMII/fiber page */ -+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG, -+ v & ~AT803X_BT_BX_REG_SEL); -+ if (ret) -+ return ret; -+ /* enable SGMII autonegotiation */ -+ ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN); -+ if (ret) -+ return ret; -+ /* select copper page */ -+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG, -+ v | AT803X_BT_BX_REG_SEL); -+ if (ret) -+ return ret; -+ } - - ret = genphy_config_init(phydev); - if (ret < 0) -@@ -394,7 +419,7 @@ static struct phy_driver at803x_driver[] - /* ATHEROS 8035 */ - .phy_id = ATH8035_PHY_ID, - .name = "Atheros 8035 ethernet", -- .phy_id_mask = 0xffffffef, -+ .phy_id_mask = AT803X_PHY_ID_MASK, - .probe = at803x_probe, - .config_init = at803x_config_init, - .link_change_notify = at803x_link_change_notify, -@@ -415,7 +440,7 @@ static struct phy_driver at803x_driver[] - /* ATHEROS 8030 */ - .phy_id = ATH8030_PHY_ID, - .name = "Atheros 8030 ethernet", -- .phy_id_mask = 0xffffffef, -+ .phy_id_mask = AT803X_PHY_ID_MASK, - .probe = at803x_probe, - .config_init = at803x_config_init, - .link_change_notify = at803x_link_change_notify, -@@ -435,8 +460,8 @@ static struct phy_driver at803x_driver[] - }, { - /* ATHEROS 8031 */ - .phy_id = ATH8031_PHY_ID, -- .name = "Atheros 8031 ethernet", -- .phy_id_mask = 0xffffffef, -+ .name = "Atheros 8031/8033 ethernet", -+ .phy_id_mask = AT803X_PHY_ID_MASK, - .probe = at803x_probe, - .config_init = at803x_config_init, - .link_change_notify = at803x_link_change_notify, -@@ -458,9 +483,9 @@ static struct phy_driver at803x_driver[] - module_phy_driver(at803x_driver); - - static struct mdio_device_id __maybe_unused atheros_tbl[] = { -- { ATH8030_PHY_ID, 0xffffffef }, -- { ATH8031_PHY_ID, 0xffffffef }, -- { ATH8035_PHY_ID, 0xffffffef }, -+ { ATH8030_PHY_ID, AT803X_PHY_ID_MASK }, -+ { ATH8031_PHY_ID, AT803X_PHY_ID_MASK }, -+ { ATH8035_PHY_ID, AT803X_PHY_ID_MASK }, - { } - }; - diff --git a/target/linux/generic/pending-4.4/736-at803x-fix-reset-handling.patch b/target/linux/generic/pending-4.4/736-at803x-fix-reset-handling.patch deleted file mode 100644 index 91c2334e55..0000000000 --- a/target/linux/generic/pending-4.4/736-at803x-fix-reset-handling.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> -Date: Wed, 23 Mar 2016 00:44:40 +0300 -Subject: [PATCH] at803x: fix reset handling -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The driver of course "knows" that the chip's reset signal is active low, -so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however -all this will only work iff the GPIO is specified as active-high in the -device tree! I think both the driver and the device trees (if there are -any -- I was unable to find them) need to be fixed in this case... - -Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset") -Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> -Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -250,7 +250,7 @@ static int at803x_probe(struct phy_devic - if (!priv) - return -ENOMEM; - -- gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); -+ gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(gpiod_reset)) - return PTR_ERR(gpiod_reset); - -@@ -377,10 +377,10 @@ static void at803x_link_change_notify(st - - at803x_context_save(phydev, &context); - -- gpiod_set_value(priv->gpiod_reset, 0); -- msleep(1); - gpiod_set_value(priv->gpiod_reset, 1); - msleep(1); -+ gpiod_set_value(priv->gpiod_reset, 0); -+ msleep(1); - - at803x_context_restore(phydev, &context); - diff --git a/target/linux/generic/pending-4.4/737-net-phy-at803x-Request-reset-GPIO-only-for-AT8030-PH.patch b/target/linux/generic/pending-4.4/737-net-phy-at803x-Request-reset-GPIO-only-for-AT8030-PH.patch deleted file mode 100644 index b30ba7aaae..0000000000 --- a/target/linux/generic/pending-4.4/737-net-phy-at803x-Request-reset-GPIO-only-for-AT8030-PH.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Sebastian Frias <sf84@laposte.net> -Date: Wed, 23 Mar 2016 11:49:09 +0100 -Subject: [PATCH] net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY - -This removes the dependency on GPIOLIB for non faulty PHYs. - -Indeed, without this patch, if GPIOLIB is not selected -devm_gpiod_get_optional() will return -ENOSYS and the driver probe -call will fail, regardless of the actual PHY hardware. - -Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035), -only AT8030 presents the issues that commit 13a56b449325 ("net: phy: -at803x: Add support for hardware reset") attempts to work-around by -using a 'reset' GPIO line. - -Hence, only AT8030 should depend on GPIOLIB operating properly. - -Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset") - -Signed-off-by: Sebastian Frias <sf84@laposte.net> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -250,12 +250,16 @@ static int at803x_probe(struct phy_devic - if (!priv) - return -ENOMEM; - -+ if (phydev->drv->phy_id != ATH8030_PHY_ID) -+ goto does_not_require_reset_workaround; -+ - gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(gpiod_reset)) - return PTR_ERR(gpiod_reset); - - priv->gpiod_reset = gpiod_reset; - -+does_not_require_reset_workaround: - phydev->priv = priv; - - return 0; diff --git a/target/linux/generic/pending-4.4/738-net-phy-at803x-only-the-AT8030-needs-a-hardware-rese.patch b/target/linux/generic/pending-4.4/738-net-phy-at803x-only-the-AT8030-needs-a-hardware-rese.patch deleted file mode 100644 index 4e6baac0c3..0000000000 --- a/target/linux/generic/pending-4.4/738-net-phy-at803x-only-the-AT8030-needs-a-hardware-rese.patch +++ /dev/null @@ -1,81 +0,0 @@ -From: Timur Tabi <timur@codeaurora.org> -Date: Tue, 26 Apr 2016 12:44:18 -0500 -Subject: [PATCH] net: phy: at803x: only the AT8030 needs a hardware reset on - link change - -Commit 13a56b44 ("at803x: Add support for hardware reset") added a -work-around for a hardware bug on the AT8030. However, the work-around -was being called for all 803x PHYs, even those that don't need it. -Function at803x_link_change_notify() checks to make sure that it only -resets the PHY on the 8030, but it makes more sense to not call that -function at all if it isn't needed. - -Signed-off-by: Timur Tabi <timur@codeaurora.org> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -374,27 +374,25 @@ static void at803x_link_change_notify(st - * in the FIFO. In such cases, the FIFO enters an error mode it - * cannot recover from by software. - */ -- if (phydev->drv->phy_id == ATH8030_PHY_ID) { -- if (phydev->state == PHY_NOLINK) { -- if (priv->gpiod_reset && !priv->phy_reset) { -- struct at803x_context context; -- -- at803x_context_save(phydev, &context); -- -- gpiod_set_value(priv->gpiod_reset, 1); -- msleep(1); -- gpiod_set_value(priv->gpiod_reset, 0); -- msleep(1); -- -- at803x_context_restore(phydev, &context); -- -- dev_dbg(&phydev->dev, "%s(): phy was reset\n", -- __func__); -- priv->phy_reset = true; -- } -- } else { -- priv->phy_reset = false; -+ if (phydev->state == PHY_NOLINK) { -+ if (priv->gpiod_reset && !priv->phy_reset) { -+ struct at803x_context context; -+ -+ at803x_context_save(phydev, &context); -+ -+ gpiod_set_value(priv->gpiod_reset, 1); -+ msleep(1); -+ gpiod_set_value(priv->gpiod_reset, 0); -+ msleep(1); -+ -+ at803x_context_restore(phydev, &context); -+ -+ dev_dbg(&phydev->dev, "%s(): phy was reset\n", -+ __func__); -+ priv->phy_reset = true; - } -+ } else { -+ priv->phy_reset = false; - } - if (pdata && pdata->fixup_rgmii_tx_delay && - phydev->speed != priv->prev_speed) { -@@ -426,7 +424,6 @@ static struct phy_driver at803x_driver[] - .phy_id_mask = AT803X_PHY_ID_MASK, - .probe = at803x_probe, - .config_init = at803x_config_init, -- .link_change_notify = at803x_link_change_notify, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, -@@ -468,7 +465,6 @@ static struct phy_driver at803x_driver[] - .phy_id_mask = AT803X_PHY_ID_MASK, - .probe = at803x_probe, - .config_init = at803x_config_init, -- .link_change_notify = at803x_link_change_notify, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, diff --git a/target/linux/generic/pending-4.4/739-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.4/739-net-phy-at803x-add-support-for-AT8032.patch deleted file mode 100644 index 4455ec49e1..0000000000 --- a/target/linux/generic/pending-4.4/739-net-phy-at803x-add-support-for-AT8032.patch +++ /dev/null @@ -1,65 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Wed, 30 Nov 2016 11:31:03 +0100 -Subject: [PATCH] net: phy: at803x: add support for AT8032 - -Like AT8030, this PHY needs the GPIO reset workaround - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -55,6 +55,7 @@ - #define AT803X_PHY_ID_MASK 0xffffffef - #define ATH8030_PHY_ID 0x004dd076 - #define ATH8031_PHY_ID 0x004dd074 -+#define ATH8032_PHY_ID 0x004dd023 - #define ATH8035_PHY_ID 0x004dd072 - - MODULE_DESCRIPTION("Atheros 803x PHY driver"); -@@ -250,7 +251,8 @@ static int at803x_probe(struct phy_devic - if (!priv) - return -ENOMEM; - -- if (phydev->drv->phy_id != ATH8030_PHY_ID) -+ if (phydev->drv->phy_id != ATH8030_PHY_ID && -+ phydev->drv->phy_id != ATH8032_PHY_ID) - goto does_not_require_reset_workaround; - - gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); -@@ -478,6 +480,27 @@ static struct phy_driver at803x_driver[] - .driver = { - .owner = THIS_MODULE, - }, -+}, { -+ /* ATHEROS 8032 */ -+ .phy_id = ATH8032_PHY_ID, -+ .name = "Atheros 8032 ethernet", -+ .phy_id_mask = AT803X_PHY_ID_MASK, -+ .probe = at803x_probe, -+ .config_init = at803x_config_init, -+ .link_change_notify = at803x_link_change_notify, -+ .set_wol = at803x_set_wol, -+ .get_wol = at803x_get_wol, -+ .suspend = at803x_suspend, -+ .resume = at803x_resume, -+ .features = PHY_GBIT_FEATURES, -+ .flags = PHY_HAS_INTERRUPT, -+ .config_aneg = genphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = &at803x_ack_interrupt, -+ .config_intr = &at803x_config_intr, -+ .driver = { -+ .owner = THIS_MODULE, -+ }, - } }; - - module_phy_driver(at803x_driver); -@@ -485,6 +508,7 @@ module_phy_driver(at803x_driver); - static struct mdio_device_id __maybe_unused atheros_tbl[] = { - { ATH8030_PHY_ID, AT803X_PHY_ID_MASK }, - { ATH8031_PHY_ID, AT803X_PHY_ID_MASK }, -+ { ATH8032_PHY_ID, AT803X_PHY_ID_MASK }, - { ATH8035_PHY_ID, AT803X_PHY_ID_MASK }, - { } - }; diff --git a/target/linux/generic/pending-4.4/773-bgmac-add-srab-switch.patch b/target/linux/generic/pending-4.4/773-bgmac-add-srab-switch.patch deleted file mode 100644 index b3cb087235..0000000000 --- a/target/linux/generic/pending-4.4/773-bgmac-add-srab-switch.patch +++ /dev/null @@ -1,88 +0,0 @@ -Register switch connected to srab - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -11,6 +11,7 @@ - - #include <linux/bcma/bcma.h> - #include <linux/etherdevice.h> -+#include <linux/platform_data/b53.h> - #include <linux/bcm47xx_nvram.h> - #include "bgmac.h" - -@@ -1403,6 +1404,17 @@ static const struct ethtool_ops bgmac_et - .get_drvinfo = bgmac_get_drvinfo, - }; - -+static struct b53_platform_data bgmac_b53_pdata = { -+}; -+ -+static struct platform_device bgmac_b53_dev = { -+ .name = "b53-srab-switch", -+ .id = -1, -+ .dev = { -+ .platform_data = &bgmac_b53_pdata, -+ }, -+}; -+ - /************************************************** - * MII - **************************************************/ -@@ -1549,6 +1561,14 @@ int bgmac_enet_probe(struct bgmac *bgmac - net_dev->hw_features = net_dev->features; - net_dev->vlan_features = net_dev->features; - -+ if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) { -+ bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000); -+ -+ err = platform_device_register(&bgmac_b53_dev); -+ if (!err) -+ bgmac->b53_device = &bgmac_b53_dev; -+ } -+ - err = register_netdev(bgmac->net_dev); - if (err) { - dev_err(bgmac->dev, "Cannot register net device\n"); -@@ -1571,6 +1591,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe); - - void bgmac_enet_remove(struct bgmac *bgmac) - { -+ if (bgmac->b53_device) -+ platform_device_unregister(&bgmac_b53_dev); -+ bgmac->b53_device = NULL; -+ - unregister_netdev(bgmac->net_dev); - phy_disconnect(bgmac->net_dev->phydev); - netif_napi_del(&bgmac->napi); ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -409,6 +409,7 @@ - #define BGMAC_FEAT_CC4_IF_SW_TYPE BIT(17) - #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18) - #define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19) -+#define BGMAC_FEAT_SRAB BIT(20) - - struct bgmac_slot_info { - union { -@@ -513,6 +514,9 @@ struct bgmac { - u32 (*get_bus_clock)(struct bgmac *bgmac); - void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask, - u32 set); -+ -+ /* platform device for associated switch */ -+ struct platform_device *b53_device; - }; - - struct bgmac *bgmac_alloc(struct device *dev); ---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c -+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c -@@ -236,6 +236,7 @@ static int bgmac_probe(struct bcma_devic - bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; - bgmac->feature_flags |= BGMAC_FEAT_NO_RESET; - bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500; -+ bgmac->feature_flags |= BGMAC_FEAT_SRAB; - break; - case BCMA_CHIP_ID_BCM53573: - bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; diff --git a/target/linux/generic/pending-4.4/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-4.4/810-pci_disable_common_quirks.patch deleted file mode 100644 index e5c9043065..0000000000 --- a/target/linux/generic/pending-4.4/810-pci_disable_common_quirks.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/pci/Kconfig -+++ b/drivers/pci/Kconfig -@@ -68,6 +68,12 @@ config XEN_PCIDEV_FRONTEND - The PCI device frontend driver allows the kernel to import arbitrary - PCI devices from a PCI backend to support PCI driver domains. - -+config PCI_DISABLE_COMMON_QUIRKS -+ bool "PCI disable common quirks" -+ depends on PCI -+ help -+ If you don't know what to do here, say N. -+ - config HT_IRQ - bool "Interrupts on hypertransport devices" - default y ---- a/drivers/pci/quirks.c -+++ b/drivers/pci/quirks.c -@@ -41,6 +41,7 @@ static void quirk_mmio_always_on(struct - DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS - /* The Mellanox Tavor device gives false positive parity errors - * Mark this device with a broken_parity_status, to allow - * PCI scanning code to "skip" this now blacklisted device. -@@ -2975,6 +2976,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); - -+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ - - /* - * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To -@@ -3031,6 +3033,8 @@ static void fixup_debug_report(struct pc - } - } - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS -+ - /* - * Some BIOS implementations leave the Intel GPU interrupts enabled, - * even though no one is handling them (f.e. i915 driver is never loaded). -@@ -3065,6 +3069,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN - DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); - DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); - -+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ -+ - /* - * PCI devices which are on Intel chips can skip the 10ms delay - * before entering D3 mode. diff --git a/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch deleted file mode 100644 index 702c9fa2b5..0000000000 --- a/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch +++ /dev/null @@ -1,101 +0,0 @@ - ---- a/drivers/usb/host/pci-quirks.c -+++ b/drivers/usb/host/pci-quirks.c -@@ -98,6 +98,8 @@ struct amd_chipset_type { - u8 rev; - }; - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS -+ - static struct amd_chipset_info { - struct pci_dev *nb_dev; - struct pci_dev *smbus_dev; -@@ -458,6 +460,10 @@ void usb_amd_dev_put(void) - } - EXPORT_SYMBOL_GPL(usb_amd_dev_put); - -+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */ -+ -+#if IS_ENABLED(CONFIG_USB_UHCI_HCD) -+ - /* - * Make sure the controller is completely inactive, unable to - * generate interrupts or do DMA. -@@ -537,8 +543,17 @@ reset_needed: - uhci_reset_hc(pdev, base); - return 1; - } -+#else -+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) -+{ -+ return 0; -+} -+ -+#endif - EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc); - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS -+ - static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) - { - u16 cmd; -@@ -1103,3 +1118,4 @@ static void quirk_usb_early_handoff(stru - } - DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); -+#endif ---- a/drivers/usb/host/pci-quirks.h -+++ b/drivers/usb/host/pci-quirks.h -@@ -4,6 +4,9 @@ - #ifdef CONFIG_PCI - void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); - int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); -+#endif /* CONFIG_PCI */ -+ -+#if defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS) - int usb_amd_find_chipset_info(void); - int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev); - bool usb_amd_hang_symptom_quirk(void); -@@ -16,11 +19,24 @@ void usb_disable_xhci_ports(struct pci_d - void sb800_prefetch(struct device *dev, int on); - #else - struct pci_dev; -+static inline int usb_amd_find_chipset_info(void) -+{ -+ return 0; -+} -+static inline bool usb_amd_hang_symptom_quirk(void) -+{ -+ return false; -+} -+static inline bool usb_amd_prefetch_quirk(void) -+{ -+ return false; -+} - static inline void usb_amd_quirk_pll_disable(void) {} - static inline void usb_amd_quirk_pll_enable(void) {} - static inline void usb_amd_dev_put(void) {} - static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} - static inline void sb800_prefetch(struct device *dev, int on) {} --#endif /* CONFIG_PCI */ -+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {} -+#endif - - #endif /* __LINUX_USB_PCI_QUIRKS_H */ ---- a/include/linux/usb/hcd.h -+++ b/include/linux/usb/hcd.h -@@ -460,7 +460,14 @@ extern int usb_hcd_pci_probe(struct pci_ - extern void usb_hcd_pci_remove(struct pci_dev *dev); - extern void usb_hcd_pci_shutdown(struct pci_dev *dev); - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS - extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); -+#else -+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev) -+{ -+ return 0; -+} -+#endif - - #ifdef CONFIG_PM - extern const struct dev_pm_ops usb_hcd_pci_pm_ops; diff --git a/target/linux/generic/pending-4.4/821-usb-Remove-annoying-warning-about-bogus-URB.patch b/target/linux/generic/pending-4.4/821-usb-Remove-annoying-warning-about-bogus-URB.patch deleted file mode 100644 index eb7cc809c7..0000000000 --- a/target/linux/generic/pending-4.4/821-usb-Remove-annoying-warning-about-bogus-URB.patch +++ /dev/null @@ -1,78 +0,0 @@ -From f13ad28ba4280d2283ca2b49f0bd384bc51e6a68 Mon Sep 17 00:00:00 2001 -From: Alexey Brodkin <abrodkin@synopsys.com> -Date: Tue, 5 Jul 2016 14:28:31 +0300 -Subject: [PATCH] usb: Remove annoying warning about bogus URB - -When ath9k-htc Wi-Fi dongle is used with generic OHCI controller -infinite stream of warnings appears in debug console like this: --------------------------->8---------------------- -usb 1-1: new full-speed USB device number 2 using ohci-platform -usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested -usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: -51008 -------------[ cut here ]------------ -WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449 -usb_submit_urb+0x1b4/0x498() -usb 1-1: BOGUS urb xfer, pipe 1 != type 3 -Modules linked in: -CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted -4.4.0-rc4-00017-g00e2d79-dirty #3 -Workqueue: events request_firmware_work_func - -Stack Trace: - arc_unwind_core.constprop.1+0xa4/0x110 ----[ end trace 649ef8c342817fc2 ]--- -------------[ cut here ]------------ -WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449 -usb_submit_urb+0x1b4/0x498() -usb 1-1: BOGUS urb xfer, pipe 1 != type 3 -Modules linked in: -CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G W -4.4.0-rc4-00017-g00e2d79-dirty #3 -Workqueue: events request_firmware_work_func - -Stack Trace: - arc_unwind_core.constprop.1+0xa4/0x110 ----[ end trace 649ef8c342817fc3 ]--- -------------[ cut here ]------------ --------------------------->8---------------------- - -There're some discussions in mailing lists proposing to disable -that particular check alltogether and magically all seem to work -fine with muted warning. - -Anyways new thread on that regard could be found here: -http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html - -Let's see what comes out of that new discussion, hopefully patching -of generic USB stuff won't be required then. - -Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> ---- - drivers/usb/core/urb.c | 5 ----- - 1 file changed, 5 deletions(-) - ---- a/drivers/usb/core/urb.c -+++ b/drivers/usb/core/urb.c -@@ -323,9 +323,6 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb); - */ - int usb_submit_urb(struct urb *urb, gfp_t mem_flags) - { -- static int pipetypes[4] = { -- PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT -- }; - int xfertype, max; - struct usb_device *dev; - struct usb_host_endpoint *ep; -@@ -443,11 +440,6 @@ int usb_submit_urb(struct urb *urb, gfp_ - * cause problems in HCDs if they get it wrong. - */ - -- /* Check that the pipe's type matches the endpoint's type */ -- if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) -- dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n", -- usb_pipetype(urb->pipe), pipetypes[xfertype]); -- - /* Check against a simple/standard policy */ - allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK | - URB_FREE_BUFFER); diff --git a/target/linux/generic/pending-4.4/831-ledtrig_netdev.patch b/target/linux/generic/pending-4.4/831-ledtrig_netdev.patch deleted file mode 100644 index a28de899ac..0000000000 --- a/target/linux/generic/pending-4.4/831-ledtrig_netdev.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/leds/trigger/Kconfig -+++ b/drivers/leds/trigger/Kconfig -@@ -108,4 +108,11 @@ config LEDS_TRIGGER_CAMERA - This enables direct flash/torch on/off by the driver, kernel space. - If unsure, say Y. - -+config LEDS_TRIGGER_NETDEV -+ tristate "LED Netdev Trigger" -+ depends on NET && LEDS_TRIGGERS -+ help -+ This allows LEDs to be controlled by network device activity. -+ If unsure, say Y. -+ - endif # LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -72,3 +72,4 @@ obj-$(CONFIG_LEDS_DAC124S085) += leds-d - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGERS) += trigger/ -+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o diff --git a/target/linux/generic/pending-4.4/834-ledtrig-libata.patch b/target/linux/generic/pending-4.4/834-ledtrig-libata.patch deleted file mode 100644 index ad63634479..0000000000 --- a/target/linux/generic/pending-4.4/834-ledtrig-libata.patch +++ /dev/null @@ -1,153 +0,0 @@ -From 52cfd51cdf6a6e14d4fb270c6343abac3bac00f4 Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Fri, 12 Dec 2014 13:38:33 +0100 -Subject: [PATCH] libata: add ledtrig support -To: linux-ide@vger.kernel.org, - Tejun Heo <tj@kernel.org> - -This adds a LED trigger for each ATA port indicating disk activity. - -As this is needed only on specific platforms (NAS SoCs and such), -these platforms should define ARCH_WANTS_LIBATA_LEDS if there -are boards with LED(s) intended to indicate ATA disk activity and -need the OS to take care of that. -In that way, if not selected, LED trigger support not will be -included in libata-core and both, codepaths and structures remain -untouched. - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> ---- - drivers/ata/Kconfig | 16 ++++++++++++++++ - drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++ - include/linux/libata.h | 9 +++++++++ - 3 files changed, 66 insertions(+) - ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR - - If unsure, say Y. - -+config ARCH_WANT_LIBATA_LEDS -+ bool -+ -+config ATA_LEDS -+ bool "support ATA port LED triggers" -+ depends on ARCH_WANT_LIBATA_LEDS -+ select NEW_LEDS -+ select LEDS_CLASS -+ select LEDS_TRIGGERS -+ default y -+ help -+ This option adds a LED trigger for each registered ATA port. -+ It is used to drive disk activity leds connected via GPIO. -+ -+ If unsure, say N. -+ - config ATA_ACPI - bool "ATA ACPI Support" - depends on ACPI ---- a/drivers/ata/libata-core.c -+++ b/drivers/ata/libata-core.c -@@ -728,6 +728,19 @@ u64 ata_tf_read_block(struct ata_taskfil - return block; - } - -+#ifdef CONFIG_ATA_LEDS -+#define LIBATA_BLINK_DELAY 20 /* ms */ -+static inline void ata_led_act(struct ata_port *ap) -+{ -+ unsigned long led_delay = LIBATA_BLINK_DELAY; -+ -+ if (unlikely(!ap->ledtrig)) -+ return; -+ -+ led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0); -+} -+#endif -+ - /** - * ata_build_rw_tf - Build ATA taskfile for given read/write request - * @tf: Target ATA taskfile -@@ -4781,6 +4794,9 @@ struct ata_queued_cmd *ata_qc_new_init(s - if (tag < 0) - return NULL; - } -+#ifdef CONFIG_ATA_LEDS -+ ata_led_act(ap); -+#endif - - qc = __ata_qc_from_tag(ap, tag); - qc->tag = tag; -@@ -5678,6 +5694,9 @@ struct ata_port *ata_port_alloc(struct a - ap->stats.unhandled_irq = 1; - ap->stats.idle_irq = 1; - #endif -+#ifdef CONFIG_ATA_LEDS -+ ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL); -+#endif - ata_sff_port_init(ap); - - return ap; -@@ -5699,6 +5718,12 @@ static void ata_host_release(struct devi - - kfree(ap->pmp_link); - kfree(ap->slave_link); -+#ifdef CONFIG_ATA_LEDS -+ if (ap->ledtrig) { -+ led_trigger_unregister(ap->ledtrig); -+ kfree(ap->ledtrig); -+ }; -+#endif - kfree(ap); - host->ports[i] = NULL; - } -@@ -6145,7 +6170,23 @@ int ata_host_register(struct ata_host *h - host->ports[i]->print_id = atomic_inc_return(&ata_print_id); - host->ports[i]->local_port_no = i + 1; - } -+#ifdef CONFIG_ATA_LEDS -+ for (i = 0; i < host->n_ports; i++) { -+ if (unlikely(!host->ports[i]->ledtrig)) -+ continue; - -+ snprintf(host->ports[i]->ledtrig_name, -+ sizeof(host->ports[i]->ledtrig_name), "ata%u", -+ host->ports[i]->print_id); -+ -+ host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name; -+ -+ if (led_trigger_register(host->ports[i]->ledtrig)) { -+ kfree(host->ports[i]->ledtrig); -+ host->ports[i]->ledtrig = NULL; -+ } -+ } -+#endif - /* Create associated sysfs transport objects */ - for (i = 0; i < host->n_ports; i++) { - rc = ata_tport_add(host->dev,host->ports[i]); ---- a/include/linux/libata.h -+++ b/include/linux/libata.h -@@ -38,6 +38,9 @@ - #include <linux/acpi.h> - #include <linux/cdrom.h> - #include <linux/sched.h> -+#ifdef CONFIG_ATA_LEDS -+#include <linux/leds.h> -+#endif - - /* - * Define if arch has non-standard setup. This is a _PCI_ standard -@@ -877,6 +880,12 @@ struct ata_port { - #ifdef CONFIG_ATA_ACPI - struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ - #endif -+ -+#ifdef CONFIG_ATA_LEDS -+ struct led_trigger *ledtrig; -+ char ledtrig_name[8]; -+#endif -+ - /* owned by EH */ - u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; - }; diff --git a/target/linux/generic/pending-4.4/835-misc-owl_loader.patch b/target/linux/generic/pending-4.4/835-misc-owl_loader.patch deleted file mode 100644 index c179020680..0000000000 --- a/target/linux/generic/pending-4.4/835-misc-owl_loader.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/misc/Kconfig -+++ b/drivers/misc/Kconfig -@@ -150,6 +150,18 @@ config SGI_IOC4 - If you have an SGI Altix with an IOC4-based card say Y. - Otherwise say N. - -+config OWL_LOADER -+ tristate "Owl loader for initializing Atheros PCI(e) Wifi chips" -+ depends on PCI -+ ---help--- -+ This kernel module helps to initialize certain Qualcomm -+ Atheros' PCI(e) Wifi chips, which have the init data -+ (which contains the PCI device ID for example) stored -+ together with the calibration data in the file system. -+ -+ This is necessary for devices like the Cisco Meraki Z1, say M. -+ Otherwise say N. -+ - config TIFM_CORE - tristate "TI Flash Media interface support" - depends on PCI ---- a/drivers/misc/Makefile -+++ b/drivers/misc/Makefile -@@ -15,6 +15,7 @@ obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o - obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o - obj-$(CONFIG_ICS932S401) += ics932s401.o - obj-$(CONFIG_LKDTM) += lkdtm.o -+obj-$(CONFIG_OWL_LOADER) += owl-loader.o - obj-$(CONFIG_TIFM_CORE) += tifm_core.o - obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o - obj-$(CONFIG_PHANTOM) += phantom.o diff --git a/target/linux/generic/pending-4.4/840-rtc7301.patch b/target/linux/generic/pending-4.4/840-rtc7301.patch deleted file mode 100644 index fafeb830e9..0000000000 --- a/target/linux/generic/pending-4.4/840-rtc7301.patch +++ /dev/null @@ -1,250 +0,0 @@ ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -1132,6 +1132,15 @@ config RTC_DRV_ZYNQMP - If you say yes here you get support for the RTC controller found on - Xilinx Zynq Ultrascale+ MPSoC. - -+config RTC_DRV_RTC7301 -+ tristate "Epson RTC-7301 SF/DG" -+ help -+ If you say Y here you will get support for the -+ Epson RTC-7301 SF/DG RTC chips. -+ -+ This driver can also be built as a module. If so, the module -+ will be called rtc-7301. -+ - comment "on-CPU RTC drivers" - - config RTC_DRV_DAVINCI ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -125,6 +125,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c - obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o - obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o - obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o -+obj-$(CONFIG_RTC_DRV_RTC7301) += rtc-rtc7301.o - obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o - obj-$(CONFIG_RTC_DRV_RV8803) += rtc-rv8803.o - obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o ---- /dev/null -+++ b/drivers/rtc/rtc-rtc7301.c -@@ -0,0 +1,219 @@ -+/* -+ * Driver for Epson RTC-7301SF/DG -+ * -+ * Copyright (C) 2009 Jose Vasconcellos -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/rtc.h> -+#include <linux/platform_device.h> -+#include <linux/io.h> -+#include <linux/delay.h> -+#include <linux/bcd.h> -+ -+#define RTC_NAME "rtc7301" -+#define RTC_VERSION "0.1" -+ -+/* Epson RTC-7301 register addresses */ -+#define RTC7301_SEC 0x00 -+#define RTC7301_SEC10 0x01 -+#define RTC7301_MIN 0x02 -+#define RTC7301_MIN10 0x03 -+#define RTC7301_HOUR 0x04 -+#define RTC7301_HOUR10 0x05 -+#define RTC7301_WEEKDAY 0x06 -+#define RTC7301_DAY 0x07 -+#define RTC7301_DAY10 0x08 -+#define RTC7301_MON 0x09 -+#define RTC7301_MON10 0x0A -+#define RTC7301_YEAR 0x0B -+#define RTC7301_YEAR10 0x0C -+#define RTC7301_YEAR100 0x0D -+#define RTC7301_YEAR1000 0x0E -+#define RTC7301_CTRLREG 0x0F -+ -+static uint8_t __iomem *rtc7301_base; -+ -+#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf) -+#define write_reg(offset, data) writeb(data, rtc7301_base + (offset)) -+ -+#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1) -+ -+static void rtc7301_init_settings(void) -+{ -+ int i; -+ -+ write_reg(RTC7301_CTRLREG, 2); -+ write_reg(RTC7301_YEAR1000, 2); -+ udelay(122); -+ -+ /* bank 1 */ -+ write_reg(RTC7301_CTRLREG, 6); -+ for (i=0; i<15; i++) -+ write_reg(i, 0); -+ -+ /* bank 2 */ -+ write_reg(RTC7301_CTRLREG, 14); -+ for (i=0; i<15; i++) -+ write_reg(i, 0); -+ write_reg(RTC7301_CTRLREG, 0); -+} -+ -+static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt) -+{ -+ int cnt; -+ uint8_t buf[16]; -+ -+ cnt = 0; -+ while (rtc7301_isbusy()) { -+ udelay(244); -+ if (cnt++ > 100) { -+ dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]); -+ return -EIO; -+ } -+ } -+ -+ for (cnt=0; cnt<16; cnt++) -+ buf[cnt] = read_reg(cnt); -+ -+ if (buf[RTC7301_SEC10] & 8) { -+ dev_err(dev, "%s: RTC not set\n", __func__); -+ return -EINVAL; -+ } -+ -+ memset(dt, 0, sizeof(*dt)); -+ -+ dt->tm_sec = buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10; -+ dt->tm_min = buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10; -+ dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10; -+ -+ dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10; -+ dt->tm_mon = buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1; -+ dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 + -+ buf[RTC7301_YEAR100]*100 + -+ ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900; -+ -+ /* the rtc device may contain illegal values on power up -+ * according to the data sheet. make sure they are valid. -+ */ -+ -+ return rtc_valid_tm(dt); -+} -+ -+static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt) -+{ -+ int data; -+ -+ data = dt->tm_year + 1900; -+ if (data >= 2100 || data < 1900) -+ return -EINVAL; -+ -+ write_reg(RTC7301_CTRLREG, 2); -+ udelay(122); -+ -+ data = bin2bcd(dt->tm_sec); -+ write_reg(RTC7301_SEC, data); -+ write_reg(RTC7301_SEC10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_min); -+ write_reg(RTC7301_MIN, data ); -+ write_reg(RTC7301_MIN10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_hour); -+ write_reg(RTC7301_HOUR, data); -+ write_reg(RTC7301_HOUR10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_mday); -+ write_reg(RTC7301_DAY, data); -+ write_reg(RTC7301_DAY10, (data>> 4)); -+ -+ data = bin2bcd(dt->tm_mon + 1); -+ write_reg(RTC7301_MON, data); -+ write_reg(RTC7301_MON10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_year % 100); -+ write_reg(RTC7301_YEAR, data); -+ write_reg(RTC7301_YEAR10, (data >> 4)); -+ data = bin2bcd((1900 + dt->tm_year) / 100); -+ write_reg(RTC7301_YEAR100, data); -+ -+ data = bin2bcd(dt->tm_wday); -+ write_reg(RTC7301_WEEKDAY, data); -+ -+ write_reg(RTC7301_CTRLREG, 0); -+ -+ return 0; -+} -+ -+static const struct rtc_class_ops rtc7301_rtc_ops = { -+ .read_time = rtc7301_get_datetime, -+ .set_time = rtc7301_set_datetime, -+}; -+ -+static int rtc7301_probe(struct platform_device *pdev) -+{ -+ struct rtc_device *rtc; -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) -+ return -ENOENT; -+ -+ rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/); -+ if (!rtc7301_base) -+ return -EINVAL; -+ -+ rtc = rtc_device_register(RTC_NAME, &pdev->dev, -+ &rtc7301_rtc_ops, THIS_MODULE); -+ if (IS_ERR(rtc)) { -+ iounmap(rtc7301_base); -+ return PTR_ERR(rtc); -+ } -+ -+ platform_set_drvdata(pdev, rtc); -+ -+ rtc7301_init_settings(); -+ return 0; -+} -+ -+static int rtc7301_remove(struct platform_device *pdev) -+{ -+ struct rtc_device *rtc = platform_get_drvdata(pdev); -+ -+ if (rtc) -+ rtc_device_unregister(rtc); -+ if (rtc7301_base) -+ iounmap(rtc7301_base); -+ return 0; -+} -+ -+static struct platform_driver rtc7301_driver = { -+ .driver = { -+ .name = RTC_NAME, -+ .owner = THIS_MODULE, -+ }, -+ .probe = rtc7301_probe, -+ .remove = rtc7301_remove, -+}; -+ -+static __init int rtc7301_init(void) -+{ -+ return platform_driver_register(&rtc7301_driver); -+} -+module_init(rtc7301_init); -+ -+static __exit void rtc7301_exit(void) -+{ -+ platform_driver_unregister(&rtc7301_driver); -+} -+module_exit(rtc7301_exit); -+ -+MODULE_DESCRIPTION("Epson 7301 RTC driver"); -+MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:" RTC_NAME); -+MODULE_VERSION(RTC_VERSION); diff --git a/target/linux/generic/pending-4.4/841-rtc_pt7c4338.patch b/target/linux/generic/pending-4.4/841-rtc_pt7c4338.patch deleted file mode 100644 index 4235efa38a..0000000000 --- a/target/linux/generic/pending-4.4/841-rtc_pt7c4338.patch +++ /dev/null @@ -1,247 +0,0 @@ ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -612,6 +612,15 @@ config RTC_DRV_S5M - This driver can also be built as a module. If so, the module - will be called rtc-s5m. - -+config RTC_DRV_PT7C4338 -+ tristate "Pericom Technology Inc. PT7C4338 RTC" -+ help -+ If you say yes here you get support for the Pericom Technology -+ Inc. PT7C4338 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called rtc-pt7c4338. -+ - endif # I2C - - comment "SPI RTC drivers" ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -116,6 +116,7 @@ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030 - obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o - obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o - obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o -+obj-$(CONFIG_RTC_DRV_PT7C4338) += rtc-pt7c4338.o - obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o - obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o - obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o ---- /dev/null -+++ b/drivers/rtc/rtc-pt7c4338.c -@@ -0,0 +1,216 @@ -+/* -+ * Copyright 2010 Freescale Semiconductor, Inc. -+ * -+ * Author: Priyanka Jain <Priyanka.Jain@freescale.com> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * This file provides Date & Time support (no alarms) for PT7C4338 chip. -+ * -+ * This file is based on drivers/rtc/rtc-ds1307.c -+ * -+ * PT7C4338 chip is manufactured by Pericom Technology Inc. -+ * It is a serial real-time clock which provides -+ * 1)Low-power clock/calendar. -+ * 2)Programmable square-wave output. -+ * It has 56 bytes of nonvolatile RAM. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/slab.h> -+#include <linux/i2c.h> -+#include <linux/rtc.h> -+#include <linux/bcd.h> -+ -+/* RTC register addresses */ -+#define PT7C4338_REG_SECONDS 0x00 -+#define PT7C4338_REG_MINUTES 0x01 -+#define PT7C4338_REG_HOURS 0x02 -+#define PT7C4338_REG_AMPM 0x02 -+#define PT7C4338_REG_DAY 0x03 -+#define PT7C4338_REG_DATE 0x04 -+#define PT7C4338_REG_MONTH 0x05 -+#define PT7C4338_REG_YEAR 0x06 -+#define PT7C4338_REG_CTRL_STAT 0x07 -+ -+/* RTC second register address bit */ -+#define PT7C4338_SEC_BIT_CH 0x80 /*Clock Halt (in Register 0)*/ -+ -+/* RTC control and status register bits */ -+#define PT7C4338_CTRL_STAT_BIT_RS0 0x1 /*Rate select 0*/ -+#define PT7C4338_CTRL_STAT_BIT_RS1 0x2 /*Rate select 1*/ -+#define PT7C4338_CTRL_STAT_BIT_SQWE 0x10 /*Square Wave Enable*/ -+#define PT7C4338_CTRL_STAT_BIT_OSF 0x20 /*Oscillator Stop Flag*/ -+#define PT7C4338_CTRL_STAT_BIT_OUT 0x80 /*Output Level Control*/ -+ -+static const struct i2c_device_id pt7c4338_id[] = { -+ { "pt7c4338", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, pt7c4338_id); -+ -+struct pt7c4338{ -+ struct i2c_client *client; -+ struct rtc_device *rtc; -+}; -+ -+static int pt7c4338_read_time(struct device *dev, struct rtc_time *time) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ int ret; -+ u8 buf[7]; -+ u8 year, month, day, hour, minute, second; -+ u8 week, twelve_hr, am_pm; -+ -+ ret = i2c_smbus_read_i2c_block_data(client, -+ PT7C4338_REG_SECONDS, 7, buf); -+ if (ret < 0) -+ return ret; -+ if (ret < 7) -+ return -EIO; -+ -+ second = buf[0]; -+ minute = buf[1]; -+ hour = buf[2]; -+ week = buf[3]; -+ day = buf[4]; -+ month = buf[5]; -+ year = buf[6]; -+ -+ /* Extract additional information for AM/PM */ -+ twelve_hr = hour & 0x40; -+ am_pm = hour & 0x20; -+ -+ /* Write to rtc_time structure */ -+ time->tm_sec = bcd2bin(second & 0x7f); -+ time->tm_min = bcd2bin(minute & 0x7f); -+ if (twelve_hr) { -+ /* Convert to 24 hr */ -+ if (am_pm) -+ time->tm_hour = bcd2bin(hour & 0x10) + 12; -+ else -+ time->tm_hour = bcd2bin(hour & 0xBF); -+ } else { -+ time->tm_hour = bcd2bin(hour); -+ } -+ -+ time->tm_wday = bcd2bin(week & 0x07) - 1; -+ time->tm_mday = bcd2bin(day & 0x3f); -+ time->tm_mon = bcd2bin(month & 0x1F) - 1; -+ /* assume 20YY not 19YY */ -+ time->tm_year = bcd2bin(year) + 100; -+ -+ return 0; -+} -+ -+static int pt7c4338_set_time(struct device *dev, struct rtc_time *time) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ u8 buf[7]; -+ -+ /* Extract time from rtc_time and load into pt7c4338*/ -+ buf[0] = bin2bcd(time->tm_sec); -+ buf[1] = bin2bcd(time->tm_min); -+ buf[2] = bin2bcd(time->tm_hour); -+ buf[3] = bin2bcd(time->tm_wday + 1); /* Day of the week */ -+ buf[4] = bin2bcd(time->tm_mday); /* Date */ -+ buf[5] = bin2bcd(time->tm_mon + 1); -+ -+ /* assume 20YY not 19YY */ -+ if (time->tm_year >= 100) -+ buf[6] = bin2bcd(time->tm_year - 100); -+ else -+ buf[6] = bin2bcd(time->tm_year); -+ -+ return i2c_smbus_write_i2c_block_data(client, -+ PT7C4338_REG_SECONDS, 7, buf); -+} -+ -+static const struct rtc_class_ops pt7c4338_rtc_ops = { -+ .read_time = pt7c4338_read_time, -+ .set_time = pt7c4338_set_time, -+}; -+ -+static int pt7c4338_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct pt7c4338 *pt7c4338; -+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); -+ int ret; -+ -+ pt7c4338 = kzalloc(sizeof(struct pt7c4338), GFP_KERNEL); -+ if (!pt7c4338) -+ return -ENOMEM; -+ -+ pt7c4338->client = client; -+ i2c_set_clientdata(client, pt7c4338); -+ pt7c4338->rtc = rtc_device_register(client->name, &client->dev, -+ &pt7c4338_rtc_ops, THIS_MODULE); -+ if (IS_ERR(pt7c4338->rtc)) { -+ ret = PTR_ERR(pt7c4338->rtc); -+ dev_err(&client->dev, "unable to register the class device\n"); -+ goto out_free; -+ } -+ -+ return 0; -+out_free: -+ i2c_set_clientdata(client, NULL); -+ kfree(pt7c4338); -+ return ret; -+} -+ -+static int pt7c4338_remove(struct i2c_client *client) -+{ -+ struct pt7c4338 *pt7c4338 = i2c_get_clientdata(client); -+ -+ rtc_device_unregister(pt7c4338->rtc); -+ i2c_set_clientdata(client, NULL); -+ kfree(pt7c4338); -+ return 0; -+} -+ -+static struct i2c_driver pt7c4338_driver = { -+ .driver = { -+ .name = "rtc-pt7c4338", -+ .owner = THIS_MODULE, -+ }, -+ .probe = pt7c4338_probe, -+ .remove = pt7c4338_remove, -+ .id_table = pt7c4338_id, -+}; -+ -+static int __init pt7c4338_init(void) -+{ -+ return i2c_add_driver(&pt7c4338_driver); -+} -+ -+static void __exit pt7c4338_exit(void) -+{ -+ i2c_del_driver(&pt7c4338_driver); -+} -+ -+module_init(pt7c4338_init); -+module_exit(pt7c4338_exit); -+ -+MODULE_AUTHOR("Priyanka Jain <Priyanka.Jain@freescale.com>"); -+MODULE_DESCRIPTION("pericom Technology Inc. PT7C4338 RTC Driver"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/pending-4.4/861-04_spi_gpio_implement_spi_delay.patch b/target/linux/generic/pending-4.4/861-04_spi_gpio_implement_spi_delay.patch deleted file mode 100644 index fc1b40c035..0000000000 --- a/target/linux/generic/pending-4.4/861-04_spi_gpio_implement_spi_delay.patch +++ /dev/null @@ -1,58 +0,0 @@ -Implement the SPI-GPIO delay function for busses that need speed limitation. - ---mb - - - ---- a/drivers/spi/spi-gpio.c -+++ b/drivers/spi/spi-gpio.c -@@ -17,6 +17,7 @@ - #include <linux/module.h> - #include <linux/platform_device.h> - #include <linux/gpio.h> -+#include <linux/delay.h> - #include <linux/of.h> - #include <linux/of_device.h> - #include <linux/of_gpio.h> -@@ -69,6 +70,7 @@ struct spi_gpio { - * #define SPI_MOSI_GPIO 120 - * #define SPI_SCK_GPIO 121 - * #define SPI_N_CHIPSEL 4 -+ * #undef NEED_SPIDELAY - * #include "spi-gpio.c" - */ - -@@ -76,6 +78,7 @@ struct spi_gpio { - #define DRIVER_NAME "spi_gpio" - - #define GENERIC_BITBANG /* vs tight inlines */ -+#define NEED_SPIDELAY 1 - - /* all functions referencing these symbols must define pdata */ - #define SPI_MISO_GPIO ((pdata)->miso) -@@ -126,12 +129,20 @@ static inline int getmiso(const struct s - #undef pdata - - /* -- * NOTE: this clocks "as fast as we can". It "should" be a function of the -- * requested device clock. Software overhead means we usually have trouble -- * reaching even one Mbit/sec (except when we can inline bitops), so for now -- * we'll just assume we never need additional per-bit slowdowns. -+ * NOTE: to clock "as fast as we can", set spi_device.max_speed_hz -+ * and spi_transfer.speed_hz to 0. -+ * Otherwise this is a function of the requested device clock. -+ * Software overhead means we usually have trouble -+ * reaching even one Mbit/sec (except when we can inline bitops). So on small -+ * embedded devices with fast SPI slaves you usually don't need a delay. - */ --#define spidelay(nsecs) do {} while (0) -+static inline void spidelay(unsigned nsecs) -+{ -+#ifdef NEED_SPIDELAY -+ if (unlikely(nsecs)) -+ ndelay(nsecs); -+#endif /* NEED_SPIDELAY */ -+} - - #include "spi-bitbang-txrx.h" - diff --git a/target/linux/generic/pending-4.4/862-gpio_spi_driver.patch b/target/linux/generic/pending-4.4/862-gpio_spi_driver.patch deleted file mode 100644 index 8f334ec396..0000000000 --- a/target/linux/generic/pending-4.4/862-gpio_spi_driver.patch +++ /dev/null @@ -1,373 +0,0 @@ -THIS CODE IS DEPRECATED. - -Please use the new mainline SPI-GPIO driver, as of 2.6.29. - ---mb - - - ---- - drivers/spi/Kconfig | 9 + - drivers/spi/Makefile | 1 - drivers/spi/spi_gpio_old.c | 251 +++++++++++++++++++++++++++++++++++++++ - include/linux/spi/spi_gpio_old.h | 73 +++++++++++ - 4 files changed, 334 insertions(+) - ---- /dev/null -+++ b/include/linux/spi/spi_gpio_old.h -@@ -0,0 +1,73 @@ -+/* -+ * spi_gpio interface to platform code -+ * -+ * Copyright (c) 2008 Piotr Skamruk -+ * Copyright (c) 2008 Michael Buesch -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef _LINUX_SPI_SPI_GPIO -+#define _LINUX_SPI_SPI_GPIO -+ -+#include <linux/types.h> -+#include <linux/spi/spi.h> -+ -+ -+/** -+ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device. -+ * -+ * This structure holds information about a GPIO-based SPI device. -+ * -+ * @pin_clk: The GPIO pin number of the CLOCK pin. -+ * -+ * @pin_miso: The GPIO pin number of the MISO pin. -+ * -+ * @pin_mosi: The GPIO pin number of the MOSI pin. -+ * -+ * @pin_cs: The GPIO pin number of the CHIPSELECT pin. -+ * -+ * @cs_activelow: If true, the chip is selected when the CS line is low. -+ * -+ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging. -+ * Note that doing no delay is not standards compliant, -+ * but it might be needed to speed up transfers on some -+ * slow embedded machines. -+ * -+ * @boardinfo_setup: This callback is called after the -+ * SPI master device was registered, but before the -+ * device is registered. -+ * @boardinfo_setup_data: Data argument passed to boardinfo_setup(). -+ */ -+struct spi_gpio_platform_data { -+ unsigned int pin_clk; -+ unsigned int pin_miso; -+ unsigned int pin_mosi; -+ unsigned int pin_cs; -+ bool cs_activelow; -+ bool no_spi_delay; -+ int (*boardinfo_setup)(struct spi_board_info *bi, -+ struct spi_master *master, -+ void *data); -+ void *boardinfo_setup_data; -+}; -+ -+/** -+ * SPI_GPIO_PLATDEV_NAME - The platform device name string. -+ * -+ * The name string that has to be used for platform_device_alloc -+ * when allocating a spi-gpio device. -+ */ -+#define SPI_GPIO_PLATDEV_NAME "spi-gpio" -+ -+/** -+ * spi_gpio_next_id - Get another platform device ID number. -+ * -+ * This returns the next platform device ID number that has to be used -+ * for platform_device_alloc. The ID is opaque and should not be used for -+ * anything else. -+ */ -+int spi_gpio_next_id(void); -+ -+#endif /* _LINUX_SPI_SPI_GPIO */ ---- /dev/null -+++ b/drivers/spi/spi_gpio_old.c -@@ -0,0 +1,251 @@ -+/* -+ * Bitbanging SPI bus driver using GPIO API -+ * -+ * Copyright (c) 2008 Piotr Skamruk -+ * Copyright (c) 2008 Michael Buesch -+ * -+ * based on spi_s3c2410_gpio.c -+ * Copyright (c) 2006 Ben Dooks -+ * Copyright (c) 2006 Simtec Electronics -+ * and on i2c-gpio.c -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/spinlock.h> -+#include <linux/workqueue.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/spi_bitbang.h> -+#include <linux/spi/spi_gpio_old.h> -+#include <linux/gpio.h> -+#include <asm/atomic.h> -+ -+ -+struct spi_gpio { -+ struct spi_bitbang bitbang; -+ struct spi_gpio_platform_data *info; -+ struct platform_device *pdev; -+ struct spi_board_info bi; -+}; -+ -+ -+static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev) -+{ -+ return dev->controller_data; -+} -+ -+static inline void setsck(struct spi_device *dev, int val) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ gpio_set_value(sp->info->pin_clk, val ? 1 : 0); -+} -+ -+static inline void setmosi(struct spi_device *dev, int val) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ gpio_set_value(sp->info->pin_mosi, val ? 1 : 0); -+} -+ -+static inline u32 getmiso(struct spi_device *dev) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ return gpio_get_value(sp->info->pin_miso) ? 1 : 0; -+} -+ -+static inline void do_spidelay(struct spi_device *dev, unsigned nsecs) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ -+ if (!sp->info->no_spi_delay) -+ ndelay(nsecs); -+} -+ -+#define spidelay(nsecs) do { \ -+ /* Steal the spi_device pointer from our caller. \ -+ * The bitbang-API should probably get fixed here... */ \ -+ do_spidelay(spi, nsecs); \ -+ } while (0) -+ -+#define EXPAND_BITBANG_TXRX -+#include "spi-bitbang-txrx.h" -+ -+static u32 spi_gpio_txrx_mode0(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -+} -+ -+static u32 spi_gpio_txrx_mode1(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); -+} -+ -+static u32 spi_gpio_txrx_mode2(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); -+} -+ -+static u32 spi_gpio_txrx_mode3(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); -+} -+ -+static void spi_gpio_chipselect(struct spi_device *dev, int on) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ -+ if (sp->info->cs_activelow) -+ on = !on; -+ gpio_set_value(sp->info->pin_cs, on ? 1 : 0); -+} -+ -+static int spi_gpio_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct spi_gpio_platform_data *pdata; -+ struct spi_gpio *sp; -+ struct spi_device *spidev; -+ int err; -+ -+ pdata = pdev->dev.platform_data; -+ if (!pdata) -+ return -ENXIO; -+ -+ err = -ENOMEM; -+ master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio)); -+ if (!master) -+ goto err_alloc_master; -+ -+ sp = spi_master_get_devdata(master); -+ platform_set_drvdata(pdev, sp); -+ sp->info = pdata; -+ -+ err = gpio_request(pdata->pin_clk, "spi_clock"); -+ if (err) -+ goto err_request_clk; -+ err = gpio_request(pdata->pin_mosi, "spi_mosi"); -+ if (err) -+ goto err_request_mosi; -+ err = gpio_request(pdata->pin_miso, "spi_miso"); -+ if (err) -+ goto err_request_miso; -+ err = gpio_request(pdata->pin_cs, "spi_cs"); -+ if (err) -+ goto err_request_cs; -+ -+ sp->bitbang.master = spi_master_get(master); -+ sp->bitbang.master->bus_num = -1; -+ sp->bitbang.master->num_chipselect = 1; -+ sp->bitbang.chipselect = spi_gpio_chipselect; -+ sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0; -+ sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1; -+ sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2; -+ sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3; -+ -+ gpio_direction_output(pdata->pin_clk, 0); -+ gpio_direction_output(pdata->pin_mosi, 0); -+ gpio_direction_output(pdata->pin_cs, -+ pdata->cs_activelow ? 1 : 0); -+ gpio_direction_input(pdata->pin_miso); -+ -+ err = spi_bitbang_start(&sp->bitbang); -+ if (err) -+ goto err_no_bitbang; -+ err = pdata->boardinfo_setup(&sp->bi, master, -+ pdata->boardinfo_setup_data); -+ if (err) -+ goto err_bi_setup; -+ sp->bi.controller_data = sp; -+ spidev = spi_new_device(master, &sp->bi); -+ if (!spidev) -+ goto err_new_dev; -+ -+ return 0; -+ -+err_new_dev: -+err_bi_setup: -+ spi_bitbang_stop(&sp->bitbang); -+err_no_bitbang: -+ spi_master_put(sp->bitbang.master); -+ gpio_free(pdata->pin_cs); -+err_request_cs: -+ gpio_free(pdata->pin_miso); -+err_request_miso: -+ gpio_free(pdata->pin_mosi); -+err_request_mosi: -+ gpio_free(pdata->pin_clk); -+err_request_clk: -+ kfree(master); -+ -+err_alloc_master: -+ return err; -+} -+ -+static int spi_gpio_remove(struct platform_device *pdev) -+{ -+ struct spi_gpio *sp; -+ struct spi_gpio_platform_data *pdata; -+ -+ pdata = pdev->dev.platform_data; -+ sp = platform_get_drvdata(pdev); -+ -+ gpio_free(pdata->pin_clk); -+ gpio_free(pdata->pin_mosi); -+ gpio_free(pdata->pin_miso); -+ gpio_free(pdata->pin_cs); -+ spi_bitbang_stop(&sp->bitbang); -+ spi_master_put(sp->bitbang.master); -+ -+ return 0; -+} -+ -+static struct platform_driver spi_gpio_driver = { -+ .driver = { -+ .name = SPI_GPIO_PLATDEV_NAME, -+ .owner = THIS_MODULE, -+ }, -+ .probe = spi_gpio_probe, -+ .remove = spi_gpio_remove, -+}; -+ -+int spi_gpio_next_id(void) -+{ -+ static atomic_t counter = ATOMIC_INIT(-1); -+ -+ return atomic_inc_return(&counter); -+} -+EXPORT_SYMBOL(spi_gpio_next_id); -+ -+static int __init spi_gpio_init(void) -+{ -+ int err; -+ -+ err = platform_driver_register(&spi_gpio_driver); -+ if (err) -+ printk(KERN_ERR "spi-gpio: register failed: %d\n", err); -+ -+ return err; -+} -+module_init(spi_gpio_init); -+ -+static void __exit spi_gpio_exit(void) -+{ -+ platform_driver_unregister(&spi_gpio_driver); -+} -+module_exit(spi_gpio_exit); -+ -+MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>"); -+MODULE_AUTHOR("Michael Buesch"); -+MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver"); -+MODULE_LICENSE("GPL v2"); ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -254,6 +254,15 @@ config SPI_IMG_SPFI - This enables support for the SPFI master controller found on - IMG SoCs. - -+config SPI_GPIO_OLD -+ tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)" -+ depends on SPI_MASTER && GPIOLIB -+ select SPI_BITBANG -+ help -+ This code is deprecated. Please use the new mainline SPI-GPIO driver. -+ -+ If unsure, say N. -+ - config SPI_IMX - tristate "Freescale i.MX SPI controllers" - depends on ARCH_MXC || COMPILE_TEST ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-li - obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o - obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o - obj-$(CONFIG_SPI_GPIO) += spi-gpio.o -+obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o - obj-$(CONFIG_SPI_IMX) += spi-imx.o - obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o diff --git a/target/linux/generic/pending-4.4/890-uart_optional_sysrq.patch b/target/linux/generic/pending-4.4/890-uart_optional_sysrq.patch deleted file mode 100644 index 0e37f9456c..0000000000 --- a/target/linux/generic/pending-4.4/890-uart_optional_sysrq.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/lib/Kconfig.debug -+++ b/lib/Kconfig.debug -@@ -382,6 +382,11 @@ config MAGIC_SYSRQ_DEFAULT_ENABLE - This may be set to 1 or 0 to enable or disable them all, or - to a bitmask as described in Documentation/sysrq.txt. - -+config MAGIC_SYSRQ_SERIAL -+ bool "Enable magic SysRq key over serial" -+ depends on MAGIC_SYSRQ -+ default y -+ - config DEBUG_KERNEL - bool "Kernel debugging" - help ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -426,7 +426,7 @@ extern void uart_handle_cts_change(struc - extern void uart_insert_char(struct uart_port *port, unsigned int status, - unsigned int overrun, unsigned int ch, unsigned int flag); - --#ifdef SUPPORT_SYSRQ -+#if defined(SUPPORT_SYSRQ) && defined(CONFIG_MAGIC_SYSRQ_SERIAL) - static inline int - uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) - { diff --git a/target/linux/generic/pending-4.4/901-debloat_sock_diag.patch b/target/linux/generic/pending-4.4/901-debloat_sock_diag.patch deleted file mode 100644 index 4733d1b79c..0000000000 --- a/target/linux/generic/pending-4.4/901-debloat_sock_diag.patch +++ /dev/null @@ -1,79 +0,0 @@ ---- a/net/Kconfig -+++ b/net/Kconfig -@@ -92,6 +92,9 @@ source "net/netlabel/Kconfig" - - endif # if INET - -+config SOCK_DIAG -+ bool -+ - config NETWORK_SECMARK - bool "Security Marking" - help ---- a/net/core/Makefile -+++ b/net/core/Makefile -@@ -9,8 +9,9 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core. - - obj-y += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \ - neighbour.o rtnetlink.o utils.o link_watch.o filter.o \ -- sock_diag.o dev_ioctl.o tso.o -+ dev_ioctl.o tso.o - -+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o - obj-$(CONFIG_XFRM) += flow.o - obj-y += net-sysfs.o - obj-$(CONFIG_PROC_FS) += net-procfs.o ---- a/net/core/sock.c -+++ b/net/core/sock.c -@@ -1474,9 +1474,11 @@ void sk_destruct(struct sock *sk) - - static void __sk_free(struct sock *sk) - { -+#ifdef CONFIG_SOCK_DIAG - if (unlikely(sock_diag_has_destroy_listeners(sk) && sk->sk_net_refcnt)) - sock_diag_broadcast_destroy(sk); - else -+#endif - sk_destruct(sk); - } - ---- a/net/ipv4/Kconfig -+++ b/net/ipv4/Kconfig -@@ -415,6 +415,7 @@ config INET_LRO - - config INET_DIAG - tristate "INET: socket monitoring interface" -+ select SOCK_DIAG - default y - ---help--- - Support for INET (TCP, DCCP, etc) socket monitoring interface used by ---- a/net/unix/Kconfig -+++ b/net/unix/Kconfig -@@ -22,6 +22,7 @@ config UNIX - config UNIX_DIAG - tristate "UNIX: socket monitoring interface" - depends on UNIX -+ select SOCK_DIAG - default n - ---help--- - Support for UNIX socket monitoring interface used by the ss tool. ---- a/net/netlink/Kconfig -+++ b/net/netlink/Kconfig -@@ -4,6 +4,7 @@ - - config NETLINK_DIAG - tristate "NETLINK: socket monitoring interface" -+ select SOCK_DIAG - default n - ---help--- - Support for NETLINK socket monitoring interface used by the ss tool. ---- a/net/packet/Kconfig -+++ b/net/packet/Kconfig -@@ -18,6 +18,7 @@ config PACKET - config PACKET_DIAG - tristate "Packet: sockets monitoring interface" - depends on PACKET -+ select SOCK_DIAG - default n - ---help--- - Support for PF_PACKET sockets monitoring interface used by the ss tool. diff --git a/target/linux/generic/pending-4.4/902-debloat_proc.patch b/target/linux/generic/pending-4.4/902-debloat_proc.patch deleted file mode 100644 index 2fe048944f..0000000000 --- a/target/linux/generic/pending-4.4/902-debloat_proc.patch +++ /dev/null @@ -1,385 +0,0 @@ ---- a/fs/locks.c -+++ b/fs/locks.c -@@ -2716,6 +2716,8 @@ static const struct file_operations proc - - static int __init proc_locks_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; - proc_create("locks", 0, NULL, &proc_locks_operations); - return 0; - } ---- a/fs/proc/Kconfig -+++ b/fs/proc/Kconfig -@@ -81,3 +81,8 @@ config PROC_CHILDREN - - Say Y if you are running any user-space software which takes benefit from - this interface. For example, rkt is such a piece of software. -+ -+config PROC_STRIPPED -+ default n -+ depends on EXPERT -+ bool "Strip non-essential /proc functionality to reduce code size" ---- a/fs/proc/consoles.c -+++ b/fs/proc/consoles.c -@@ -106,6 +106,9 @@ static const struct file_operations proc - - static int __init proc_consoles_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; -+ - proc_create("consoles", 0, NULL, &proc_consoles_operations); - return 0; - } ---- a/fs/proc/proc_tty.c -+++ b/fs/proc/proc_tty.c -@@ -144,7 +144,10 @@ static const struct file_operations proc - void proc_tty_register_driver(struct tty_driver *driver) - { - struct proc_dir_entry *ent; -- -+ -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; -+ - if (!driver->driver_name || driver->proc_entry || - !driver->ops->proc_fops) - return; -@@ -161,6 +164,9 @@ void proc_tty_unregister_driver(struct t - { - struct proc_dir_entry *ent; - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; -+ - ent = driver->proc_entry; - if (!ent) - return; -@@ -175,6 +181,9 @@ void proc_tty_unregister_driver(struct t - */ - void __init proc_tty_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; -+ - if (!proc_mkdir("tty", NULL)) - return; - proc_mkdir("tty/ldisc", NULL); /* Preserved: it's userspace visible */ ---- a/kernel/exec_domain.c -+++ b/kernel/exec_domain.c -@@ -41,6 +41,8 @@ static const struct file_operations exec - - static int __init proc_execdomains_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; - proc_create("execdomains", 0, NULL, &execdomains_proc_fops); - return 0; - } ---- a/kernel/irq/proc.c -+++ b/kernel/irq/proc.c -@@ -327,6 +327,9 @@ void register_irq_proc(unsigned int irq, - static DEFINE_MUTEX(register_lock); - char name [MAX_NAMELEN]; - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP)) -+ return; -+ - if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip)) - return; - -@@ -376,6 +379,9 @@ void unregister_irq_proc(unsigned int ir - { - char name [MAX_NAMELEN]; - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP)) -+ return; -+ - if (!root_irq_dir || !desc->dir) - return; - #ifdef CONFIG_SMP -@@ -411,6 +417,9 @@ void init_irq_proc(void) - unsigned int irq; - struct irq_desc *desc; - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP)) -+ return; -+ - /* create /proc/irq */ - root_irq_dir = proc_mkdir("irq", NULL); - if (!root_irq_dir) ---- a/kernel/time/timer_list.c -+++ b/kernel/time/timer_list.c -@@ -393,6 +393,8 @@ static int __init init_timer_list_procfs - { - struct proc_dir_entry *pe; - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; - pe = proc_create("timer_list", 0444, NULL, &timer_list_fops); - if (!pe) - return -ENOMEM; ---- a/mm/vmalloc.c -+++ b/mm/vmalloc.c -@@ -2684,6 +2684,8 @@ static const struct file_operations proc - - static int __init proc_vmalloc_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; - proc_create("vmallocinfo", S_IRUSR, NULL, &proc_vmalloc_operations); - return 0; - } ---- a/mm/vmstat.c -+++ b/mm/vmstat.c -@@ -1558,10 +1558,12 @@ static int __init setup_vmstat(void) - cpu_notifier_register_done(); - #endif - #ifdef CONFIG_PROC_FS -- proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations); -- proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops); -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) { -+ proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations); -+ proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops); -+ proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations); -+ } - proc_create("vmstat", S_IRUGO, NULL, &proc_vmstat_file_operations); -- proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations); - #endif - return 0; - } ---- a/net/8021q/vlanproc.c -+++ b/net/8021q/vlanproc.c -@@ -127,6 +127,9 @@ void vlan_proc_cleanup(struct net *net) - { - struct vlan_net *vn = net_generic(net, vlan_net_id); - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; -+ - if (vn->proc_vlan_conf) - remove_proc_entry(name_conf, vn->proc_vlan_dir); - -@@ -146,6 +149,9 @@ int __net_init vlan_proc_init(struct net - { - struct vlan_net *vn = net_generic(net, vlan_net_id); - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; -+ - vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net); - if (!vn->proc_vlan_dir) - goto err; ---- a/net/core/sock.c -+++ b/net/core/sock.c -@@ -3044,6 +3044,8 @@ static __net_initdata struct pernet_oper - - static int __init proto_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; - return register_pernet_subsys(&proto_net_ops); - } - ---- a/net/ipv4/fib_trie.c -+++ b/net/ipv4/fib_trie.c -@@ -2641,10 +2641,12 @@ static const struct file_operations fib_ - - int __net_init fib_proc_init(struct net *net) - { -- if (!proc_create("fib_trie", S_IRUGO, net->proc_net, &fib_trie_fops)) -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && -+ !proc_create("fib_trie", S_IRUGO, net->proc_net, &fib_trie_fops)) - goto out1; - -- if (!proc_create("fib_triestat", S_IRUGO, net->proc_net, -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && -+ !proc_create("fib_triestat", S_IRUGO, net->proc_net, - &fib_triestat_fops)) - goto out2; - -@@ -2654,17 +2656,21 @@ int __net_init fib_proc_init(struct net - return 0; - - out3: -- remove_proc_entry("fib_triestat", net->proc_net); -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ remove_proc_entry("fib_triestat", net->proc_net); - out2: -- remove_proc_entry("fib_trie", net->proc_net); -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ remove_proc_entry("fib_trie", net->proc_net); - out1: - return -ENOMEM; - } - - void __net_exit fib_proc_exit(struct net *net) - { -- remove_proc_entry("fib_trie", net->proc_net); -- remove_proc_entry("fib_triestat", net->proc_net); -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) { -+ remove_proc_entry("fib_trie", net->proc_net); -+ remove_proc_entry("fib_triestat", net->proc_net); -+ } - remove_proc_entry("route", net->proc_net); - } - ---- a/net/ipv4/proc.c -+++ b/net/ipv4/proc.c -@@ -539,6 +539,9 @@ static __net_initdata struct pernet_oper - - int __init ip_misc_proc_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; -+ - return register_pernet_subsys(&ip_proc_ops); - } - ---- a/net/ipv4/route.c -+++ b/net/ipv4/route.c -@@ -423,6 +423,9 @@ static struct pernet_operations ip_rt_pr - - static int __init ip_rt_proc_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return 0; -+ - return register_pernet_subsys(&ip_rt_proc_ops); - } - ---- a/ipc/msg.c -+++ b/ipc/msg.c -@@ -1071,6 +1071,9 @@ void __init msg_init(void) - { - msg_init_ns(&init_ipc_ns); - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; -+ - ipc_init_proc_interface("sysvipc/msg", - " key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n", - IPC_MSG_IDS, sysvipc_msg_proc_show); ---- a/ipc/sem.c -+++ b/ipc/sem.c -@@ -198,6 +198,8 @@ void sem_exit_ns(struct ipc_namespace *n - void __init sem_init(void) - { - sem_init_ns(&init_ipc_ns); -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; - ipc_init_proc_interface("sysvipc/sem", - " key semid perms nsems uid gid cuid cgid otime ctime\n", - IPC_SEM_IDS, sysvipc_sem_proc_show); ---- a/ipc/shm.c -+++ b/ipc/shm.c -@@ -118,6 +118,8 @@ pure_initcall(ipc_ns_init); - - void __init shm_init(void) - { -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; - ipc_init_proc_interface("sysvipc/shm", - #if BITS_PER_LONG <= 32 - " key shmid perms size cpid lpid nattch uid gid cuid cgid atime dtime ctime rss swap\n", ---- a/ipc/util.c -+++ b/ipc/util.c -@@ -121,6 +121,9 @@ void __init ipc_init_proc_interface(cons - struct proc_dir_entry *pde; - struct ipc_proc_iface *iface; - -+ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ return; -+ - iface = kmalloc(sizeof(*iface), GFP_KERNEL); - if (!iface) - return; ---- a/net/core/net-procfs.c -+++ b/net/core/net-procfs.c -@@ -318,10 +318,12 @@ static int __net_init dev_proc_net_init( - - if (!proc_create("dev", S_IRUGO, net->proc_net, &dev_seq_fops)) - goto out; -- if (!proc_create("softnet_stat", S_IRUGO, net->proc_net, -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && -+ !proc_create("softnet_stat", S_IRUGO, net->proc_net, - &softnet_seq_fops)) - goto out_dev; -- if (!proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops)) -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && -+ !proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops)) - goto out_softnet; - - if (wext_proc_init(net)) -@@ -330,9 +332,11 @@ static int __net_init dev_proc_net_init( - out: - return rc; - out_ptype: -- remove_proc_entry("ptype", net->proc_net); -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ remove_proc_entry("ptype", net->proc_net); - out_softnet: -- remove_proc_entry("softnet_stat", net->proc_net); -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) -+ remove_proc_entry("softnet_stat", net->proc_net); - out_dev: - remove_proc_entry("dev", net->proc_net); - goto out; -@@ -342,8 +346,10 @@ static void __net_exit dev_proc_net_exit - { - wext_proc_exit(net); - -- remove_proc_entry("ptype", net->proc_net); -- remove_proc_entry("softnet_stat", net->proc_net); -+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) { -+ remove_proc_entry("ptype", net->proc_net); -+ remove_proc_entry("softnet_stat", net->proc_net); -+ } - remove_proc_entry("dev", net->proc_net); - } - ---- a/include/net/snmp.h -+++ b/include/net/snmp.h -@@ -123,6 +123,30 @@ struct linux_xfrm_mib { - #define DECLARE_SNMP_STAT(type, name) \ - extern __typeof__(type) __percpu *name - -+#ifdef CONFIG_PROC_STRIPPED -+#define SNMP_INC_STATS_BH(mib, field) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_INC_STATS_USER(mib, field) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_INC_STATS(mib, field) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_DEC_STATS(mib, field) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_ADD_STATS_BH(mib, field, addend) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_ADD_STATS_USER(mib, field, addend) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_ADD_STATS(mib, field, addend) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_UPD_PO_STATS(mib, basefield, addend) \ -+ do { (void) mib->mibs[0]; } while(0) -+#define SNMP_UPD_PO_STATS_BH(mib, basefield, addend) \ -+ do { (void) mib->mibs[0]; } while(0) -+ -+#else -+ - #define SNMP_INC_STATS_BH(mib, field) \ - __this_cpu_inc(mib->mibs[field]) - -@@ -159,8 +183,9 @@ struct linux_xfrm_mib { - __this_cpu_add(ptr[basefield##OCTETS], addend); \ - } while (0) - -+#endif - --#if BITS_PER_LONG==32 -+#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED) - - #define SNMP_ADD_STATS64_BH(mib, field, addend) \ - do { \ diff --git a/target/linux/generic/pending-4.4/904-debloat_dma_buf.patch b/target/linux/generic/pending-4.4/904-debloat_dma_buf.patch deleted file mode 100644 index b9fdad9c1b..0000000000 --- a/target/linux/generic/pending-4.4/904-debloat_dma_buf.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/base/Kconfig -+++ b/drivers/base/Kconfig -@@ -232,7 +232,7 @@ config SOC_BUS - source "drivers/base/regmap/Kconfig" - - config DMA_SHARED_BUFFER -- bool -+ tristate - default n - select ANON_INODES - help ---- a/drivers/dma-buf/Makefile -+++ b/drivers/dma-buf/Makefile -@@ -1 +1,2 @@ --obj-y := dma-buf.o fence.o reservation.o seqno-fence.o -+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o -+dma-shared-buffer-objs := dma-buf.o fence.o reservation.o seqno-fence.o ---- a/drivers/dma-buf/dma-buf.c -+++ b/drivers/dma-buf/dma-buf.c -@@ -33,6 +33,7 @@ - #include <linux/seq_file.h> - #include <linux/poll.h> - #include <linux/reservation.h> -+#include <linux/module.h> - - static inline int is_dma_buf_file(struct file *); - -@@ -914,4 +915,5 @@ static void __exit dma_buf_deinit(void) - { - dma_buf_uninit_debugfs(); - } --__exitcall(dma_buf_deinit); -+module_exit(dma_buf_deinit); -+MODULE_LICENSE("GPL"); ---- a/kernel/sched/core.c -+++ b/kernel/sched/core.c -@@ -2096,6 +2096,7 @@ int wake_up_state(struct task_struct *p, - { - return try_to_wake_up(p, state, 0); - } -+EXPORT_SYMBOL_GPL(wake_up_state); - - /* - * This function clears the sched_dl_entity static params. diff --git a/target/linux/generic/pending-4.4/910-kobject_uevent.patch b/target/linux/generic/pending-4.4/910-kobject_uevent.patch deleted file mode 100644 index a2c935f26b..0000000000 --- a/target/linux/generic/pending-4.4/910-kobject_uevent.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/lib/kobject_uevent.c -+++ b/lib/kobject_uevent.c -@@ -52,6 +52,18 @@ static const char *kobject_actions[] = { - [KOBJ_OFFLINE] = "offline", - }; - -+u64 uevent_next_seqnum(void) -+{ -+ u64 seq; -+ -+ mutex_lock(&uevent_sock_mutex); -+ seq = ++uevent_seqnum; -+ mutex_unlock(&uevent_sock_mutex); -+ -+ return seq; -+} -+EXPORT_SYMBOL_GPL(uevent_next_seqnum); -+ - /** - * kobject_action_type - translate action string to numeric type - * diff --git a/target/linux/generic/pending-4.4/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/pending-4.4/911-kobject_add_broadcast_uevent.patch deleted file mode 100644 index a3401ff4b3..0000000000 --- a/target/linux/generic/pending-4.4/911-kobject_add_broadcast_uevent.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/include/linux/kobject.h -+++ b/include/linux/kobject.h -@@ -32,6 +32,8 @@ - #define UEVENT_NUM_ENVP 32 /* number of env pointers */ - #define UEVENT_BUFFER_SIZE 2048 /* buffer for the variables */ - -+struct sk_buff; -+ - #ifdef CONFIG_UEVENT_HELPER - /* path to the userspace helper executed on an event */ - extern char uevent_helper[]; -@@ -222,4 +224,7 @@ int add_uevent_var(struct kobj_uevent_en - int kobject_action_type(const char *buf, size_t count, - enum kobject_action *type); - -+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, -+ gfp_t allocation); -+ - #endif /* _KOBJECT_H_ */ ---- a/lib/kobject_uevent.c -+++ b/lib/kobject_uevent.c -@@ -423,6 +423,43 @@ int add_uevent_var(struct kobj_uevent_en - EXPORT_SYMBOL_GPL(add_uevent_var); - - #if defined(CONFIG_NET) -+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, -+ gfp_t allocation) -+{ -+ struct uevent_sock *ue_sk; -+ int err = 0; -+ -+ /* send netlink message */ -+ mutex_lock(&uevent_sock_mutex); -+ list_for_each_entry(ue_sk, &uevent_sock_list, list) { -+ struct sock *uevent_sock = ue_sk->sk; -+ struct sk_buff *skb2; -+ -+ skb2 = skb_clone(skb, allocation); -+ if (!skb2) -+ break; -+ -+ err = netlink_broadcast(uevent_sock, skb2, pid, group, -+ allocation); -+ if (err) -+ break; -+ } -+ mutex_unlock(&uevent_sock_mutex); -+ -+ kfree_skb(skb); -+ return err; -+} -+#else -+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, -+ gfp_t allocation) -+{ -+ kfree_skb(skb); -+ return 0; -+} -+#endif -+EXPORT_SYMBOL_GPL(broadcast_uevent); -+ -+#if defined(CONFIG_NET) - static int uevent_net_init(struct net *net) - { - struct uevent_sock *ue_sk; diff --git a/target/linux/generic/pending-4.4/921-use_preinit_as_init.patch b/target/linux/generic/pending-4.4/921-use_preinit_as_init.patch deleted file mode 100644 index 3aba9d63ba..0000000000 --- a/target/linux/generic/pending-4.4/921-use_preinit_as_init.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/init/main.c -+++ b/init/main.c -@@ -966,7 +966,8 @@ static int __ref kernel_init(void *unuse - panic("Requested init %s failed (error %d).", - execute_command, ret); - } -- if (!try_to_run_init_process("/sbin/init") || -+ if (!try_to_run_init_process("/etc/preinit") || -+ !try_to_run_init_process("/sbin/init") || - !try_to_run_init_process("/etc/init") || - !try_to_run_init_process("/bin/init") || - !try_to_run_init_process("/bin/sh")) diff --git a/target/linux/generic/pending-4.4/922-always-create-console-node-in-initramfs.patch b/target/linux/generic/pending-4.4/922-always-create-console-node-in-initramfs.patch deleted file mode 100644 index 988de35ce0..0000000000 --- a/target/linux/generic/pending-4.4/922-always-create-console-node-in-initramfs.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -59,6 +59,18 @@ default_initramfs() { - EOF - } - -+list_openwrt_initramfs() { -+ : -+} -+ -+openwrt_initramfs() { -+ # make sure that /dev/console exists -+ cat <<-EOF >> ${output} -+ dir /dev 0755 0 0 -+ nod /dev/console 0600 0 0 c 5 1 -+ EOF -+} -+ - filetype() { - local argv1="$1" - -@@ -177,6 +189,8 @@ dir_filelist() { - if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then - ${dep_list}print_mtime "$1" - -+ ${dep_list}openwrt_initramfs -+ - echo "${dirlist}" | \ - while read x; do - ${dep_list}parse ${x} diff --git a/target/linux/generic/pending-4.4/930-crashlog.patch b/target/linux/generic/pending-4.4/930-crashlog.patch deleted file mode 100644 index fdc80d750a..0000000000 --- a/target/linux/generic/pending-4.4/930-crashlog.patch +++ /dev/null @@ -1,317 +0,0 @@ ---- /dev/null -+++ b/include/linux/crashlog.h -@@ -0,0 +1,17 @@ -+#ifndef __CRASHLOG_H -+#define __CRASHLOG_H -+ -+#ifdef CONFIG_CRASHLOG -+void crashlog_init_bootmem(struct bootmem_data *bdata); -+void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size); -+#else -+static inline void crashlog_init_bootmem(struct bootmem_data *bdata) -+{ -+} -+ -+static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size) -+{ -+} -+#endif -+ -+#endif ---- a/init/Kconfig -+++ b/init/Kconfig -@@ -1296,6 +1296,10 @@ config RELAY - - If unsure, say N. - -+config CRASHLOG -+ bool "Crash logging" -+ depends on (!NO_BOOTMEM || HAVE_MEMBLOCK) -+ - config BLK_DEV_INITRD - bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" - depends on BROKEN || !FRV ---- a/kernel/Makefile -+++ b/kernel/Makefile -@@ -103,6 +103,7 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o - obj-$(CONFIG_MEMBARRIER) += membarrier.o - - obj-$(CONFIG_HAS_IOMEM) += memremap.o -+obj-$(CONFIG_CRASHLOG) += crashlog.o - - $(obj)/configs.o: $(obj)/config_data.h - ---- /dev/null -+++ b/kernel/crashlog.c -@@ -0,0 +1,213 @@ -+/* -+ * Crash information logger -+ * Copyright (C) 2010 Felix Fietkau <nbd@nbd.name> -+ * -+ * Based on ramoops.c -+ * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA -+ * 02110-1301 USA -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/bootmem.h> -+#include <linux/memblock.h> -+#include <linux/debugfs.h> -+#include <linux/crashlog.h> -+#include <linux/kmsg_dump.h> -+#include <linux/module.h> -+#include <linux/pfn.h> -+#include <linux/vmalloc.h> -+#include <asm/io.h> -+ -+#define CRASHLOG_PAGES 4 -+#define CRASHLOG_SIZE (CRASHLOG_PAGES * PAGE_SIZE) -+#define CRASHLOG_MAGIC 0xa1eedead -+ -+/* -+ * Start the log at 1M before the end of RAM, as some boot loaders like -+ * to use the end of the RAM for stack usage and other things -+ * If this fails, fall back to using the last part. -+ */ -+#define CRASHLOG_OFFSET (1024 * 1024) -+ -+struct crashlog_data { -+ u32 magic; -+ u32 len; -+ u8 data[]; -+}; -+ -+static struct debugfs_blob_wrapper crashlog_blob; -+static unsigned long crashlog_addr = 0; -+static struct crashlog_data *crashlog_buf; -+static struct kmsg_dumper dump; -+static bool first = true; -+ -+extern struct list_head *crashlog_modules; -+ -+static bool crashlog_set_addr(phys_addr_t addr, phys_addr_t size) -+{ -+ /* Limit to lower 64 MB to avoid highmem */ -+ phys_addr_t limit = 64 * 1024 * 1024; -+ -+ if (crashlog_addr) -+ return false; -+ -+ if (addr > limit) -+ return false; -+ -+ if (addr + size > limit) -+ size = limit - addr; -+ -+ crashlog_addr = addr; -+ -+ if (addr + size > CRASHLOG_OFFSET) -+ crashlog_addr += size - CRASHLOG_OFFSET; -+ -+ return true; -+} -+ -+#ifndef CONFIG_NO_BOOTMEM -+void __init crashlog_init_bootmem(bootmem_data_t *bdata) -+{ -+ phys_addr_t start, end; -+ -+ start = PFN_PHYS(bdata->node_low_pfn); -+ end = PFN_PHYS(bdata->node_min_pfn); -+ if (!crashlog_set_addr(start, end - start)) -+ return; -+ -+ if (reserve_bootmem(crashlog_addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) { -+ printk("Crashlog failed to allocate RAM at address 0x%lx\n", -+ crashlog_addr); -+ crashlog_addr = 0; -+ } -+} -+#endif -+ -+#ifdef CONFIG_HAVE_MEMBLOCK -+void __init_memblock crashlog_init_memblock(phys_addr_t addr, phys_addr_t size) -+{ -+ if (!crashlog_set_addr(addr, size)) -+ return; -+ -+ if (memblock_reserve(crashlog_addr, CRASHLOG_SIZE)) { -+ printk("Crashlog failed to allocate RAM at address 0x%lx\n", -+ crashlog_addr); -+ crashlog_addr = 0; -+ } -+} -+#endif -+ -+static void __init crashlog_copy(void) -+{ -+ if (crashlog_buf->magic != CRASHLOG_MAGIC) -+ return; -+ -+ if (!crashlog_buf->len || crashlog_buf->len > -+ CRASHLOG_SIZE - sizeof(*crashlog_buf)) -+ return; -+ -+ crashlog_blob.size = crashlog_buf->len; -+ crashlog_blob.data = kmemdup(crashlog_buf->data, -+ crashlog_buf->len, GFP_KERNEL); -+ -+ debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob); -+} -+ -+static int get_maxlen(void) -+{ -+ return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len; -+} -+ -+static void crashlog_printf(const char *fmt, ...) -+{ -+ va_list args; -+ int len = get_maxlen(); -+ -+ if (!len) -+ return; -+ -+ va_start(args, fmt); -+ crashlog_buf->len += vscnprintf( -+ &crashlog_buf->data[crashlog_buf->len], -+ len, fmt, args); -+ va_end(args); -+} -+ -+static void crashlog_do_dump(struct kmsg_dumper *dumper, -+ enum kmsg_dump_reason reason) -+{ -+ struct timeval tv; -+ struct module *m; -+ char *buf; -+ size_t len; -+ -+ if (!first) -+ crashlog_printf("\n===================================\n"); -+ -+ do_gettimeofday(&tv); -+ crashlog_printf("Time: %lu.%lu\n", -+ (long)tv.tv_sec, (long)tv.tv_usec); -+ -+ if (first) { -+ crashlog_printf("Modules:"); -+ list_for_each_entry(m, crashlog_modules, list) { -+ crashlog_printf("\t%s@%p+%x", m->name, -+ m->module_core, m->core_size, -+ m->module_init, m->init_size); -+ } -+ crashlog_printf("\n"); -+ first = false; -+ } -+ -+ buf = (char *)&crashlog_buf->data[crashlog_buf->len]; -+ -+ kmsg_dump_get_buffer(dumper, true, buf, get_maxlen(), &len); -+ -+ crashlog_buf->len += len; -+} -+ -+ -+int __init crashlog_init_fs(void) -+{ -+ struct page *pages[CRASHLOG_PAGES]; -+ pgprot_t prot; -+ int i; -+ -+ if (!crashlog_addr) { -+ printk("No memory allocated for crashlog\n"); -+ return -ENOMEM; -+ } -+ -+ printk("Crashlog allocated RAM at address 0x%lx\n", (unsigned long) crashlog_addr); -+ for (i = 0; i < CRASHLOG_PAGES; i++) -+ pages[i] = pfn_to_page((crashlog_addr >> PAGE_SHIFT) + i); -+ -+ prot = pgprot_writecombine(PAGE_KERNEL); -+ crashlog_buf = vmap(pages, CRASHLOG_PAGES, VM_MAP, prot); -+ -+ crashlog_copy(); -+ -+ crashlog_buf->magic = CRASHLOG_MAGIC; -+ crashlog_buf->len = 0; -+ -+ dump.max_reason = KMSG_DUMP_OOPS; -+ dump.dump = crashlog_do_dump; -+ kmsg_dump_register(&dump); -+ -+ return 0; -+} -+module_init(crashlog_init_fs); ---- a/kernel/module.c -+++ b/kernel/module.c -@@ -275,6 +275,9 @@ static void mod_update_bounds(struct mod - #ifdef CONFIG_KGDB_KDB - struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */ - #endif /* CONFIG_KGDB_KDB */ -+#ifdef CONFIG_CRASHLOG -+struct list_head *crashlog_modules = &modules; -+#endif - - static void module_assert_mutex(void) - { ---- a/mm/memblock.c -+++ b/mm/memblock.c -@@ -19,6 +19,7 @@ - #include <linux/debugfs.h> - #include <linux/seq_file.h> - #include <linux/memblock.h> -+#include <linux/crashlog.h> - - #include <asm-generic/sections.h> - #include <linux/io.h> -@@ -503,6 +504,8 @@ static void __init_memblock memblock_ins - memblock_set_region_node(rgn, nid); - type->cnt++; - type->total_size += size; -+ if (type == &memblock.memory) -+ crashlog_init_memblock(base, size); - } - - /** -@@ -541,6 +544,8 @@ int __init_memblock memblock_add_range(s - type->regions[0].flags = flags; - memblock_set_region_node(&type->regions[0], nid); - type->total_size = size; -+ if (type == &memblock.memory) -+ crashlog_init_memblock(base, size); - return 0; - } - repeat: ---- a/mm/bootmem.c -+++ b/mm/bootmem.c -@@ -15,6 +15,7 @@ - #include <linux/export.h> - #include <linux/kmemleak.h> - #include <linux/range.h> -+#include <linux/crashlog.h> - #include <linux/memblock.h> - #include <linux/bug.h> - #include <linux/io.h> -@@ -177,6 +178,7 @@ static unsigned long __init free_all_boo - if (!bdata->node_bootmem_map) - return 0; - -+ crashlog_init_bootmem(bdata); - map = bdata->node_bootmem_map; - start = bdata->node_min_pfn; - end = bdata->node_low_pfn; diff --git a/target/linux/generic/pending-4.4/970-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-4.4/970-remove-unsane-filenames-from-deps_initramfs-list.patch deleted file mode 100644 index ac13c9e673..0000000000 --- a/target/linux/generic/pending-4.4/970-remove-unsane-filenames-from-deps_initramfs-list.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/usr/Makefile -+++ b/usr/Makefile -@@ -53,6 +53,8 @@ ifneq ($(wildcard $(obj)/.initramfs_data - include $(obj)/.initramfs_data.cpio.d - endif - -+deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v))) -+ - quiet_cmd_initfs = GEN $@ - cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) - -@@ -61,14 +63,14 @@ targets := initramfs_data.cpio.gz initra - initramfs_data.cpio.lzo initramfs_data.cpio.lz4 \ - initramfs_data.cpio - # do not try to update files included in initramfs --$(deps_initramfs): ; -+$(deps_initramfs_sane): ; - --$(deps_initramfs): klibcdirs -+$(deps_initramfs_sane): klibcdirs - # We rebuild initramfs_data.cpio if: - # 1) Any included file is newer then initramfs_data.cpio - # 2) There are changes in which files are included (added or deleted) - # 3) If gen_init_cpio are newer than initramfs_data.cpio - # 4) arguments to gen_initramfs.sh changes --$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs -+$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs - $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d - $(call if_changed,initfs) diff --git a/target/linux/generic/pending-4.4/995-mangle_bootargs.patch b/target/linux/generic/pending-4.4/995-mangle_bootargs.patch deleted file mode 100644 index 821370350e..0000000000 --- a/target/linux/generic/pending-4.4/995-mangle_bootargs.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/init/main.c -+++ b/init/main.c -@@ -356,6 +356,29 @@ static inline void setup_nr_cpu_ids(void - static inline void smp_prepare_cpus(unsigned int maxcpus) { } - #endif - -+#ifdef CONFIG_MANGLE_BOOTARGS -+static void __init mangle_bootargs(char *command_line) -+{ -+ char *rootdev; -+ char *rootfs; -+ -+ rootdev = strstr(command_line, "root=/dev/mtdblock"); -+ -+ if (rootdev) -+ strncpy(rootdev, "mangled_rootblock=", 18); -+ -+ rootfs = strstr(command_line, "rootfstype"); -+ -+ if (rootfs) -+ strncpy(rootfs, "mangled_fs", 10); -+ -+} -+#else -+static void __init mangle_bootargs(char *command_line) -+{ -+} -+#endif -+ - /* - * We need to store the untouched command line for future reference. - * We also need to store the touched command line since the parameter -@@ -529,6 +552,7 @@ asmlinkage __visible void __init start_k - pr_notice("%s", linux_banner); - setup_arch(&command_line); - mm_init_cpumask(&init_mm); -+ mangle_bootargs(command_line); - setup_command_line(command_line); - setup_nr_cpu_ids(); - setup_per_cpu_areas(); ---- a/init/Kconfig -+++ b/init/Kconfig -@@ -1655,6 +1655,15 @@ config EMBEDDED - an embedded system so certain expert options are available - for configuration. - -+config MANGLE_BOOTARGS -+ bool "Rename offending bootargs" -+ depends on EXPERT -+ help -+ Sometimes the bootloader passed bogus root= and rootfstype= -+ parameters to the kernel, and while you want to ignore them, -+ you need to know the values f.e. to support dual firmware -+ layouts on the flash. -+ - config HAVE_PERF_EVENTS - bool - help diff --git a/target/linux/generic/pending-4.4/998-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-4.4/998-enable_wilink_platform_without_drivers.patch deleted file mode 100644 index d317de1102..0000000000 --- a/target/linux/generic/pending-4.4/998-enable_wilink_platform_without_drivers.patch +++ /dev/null @@ -1,15 +0,0 @@ -We use backports for driver updates - make sure we can compile in the glue code regardless - -Signed-off-by: Imre Kaloz <kaloz@openwrt.org> - ---- a/drivers/net/wireless/ti/Kconfig -+++ b/drivers/net/wireless/ti/Kconfig -@@ -15,7 +15,7 @@ source "drivers/net/wireless/ti/wlcore/K - - config WILINK_PLATFORM_DATA - bool "TI WiLink platform data" -- depends on WLCORE_SDIO || WL1251_SDIO -+ depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS - default y - ---help--- - Small platform data bit needed to pass data to the sdio modules. |