aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2017-02-10 13:44:06 +0100
committerJohn Crispin <john@phrozen.org>2017-02-14 12:25:33 +0100
commit56561b9f5198d39604809e5cc10dead3e12c1fdf (patch)
treea3c789e645a26e4cfc3197b7e1e78b21db53aaef
parenta9fdb35740e52552274fbe8b7fd6cc5734068b98 (diff)
downloadupstream-56561b9f5198d39604809e5cc10dead3e12c1fdf.tar.gz
upstream-56561b9f5198d39604809e5cc10dead3e12c1fdf.tar.bz2
upstream-56561b9f5198d39604809e5cc10dead3e12c1fdf.zip
ar71xx: add support for TP-Link TL-WA850RE v2
TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender, based on Qualcomm/Atheros QCA9533 v2. Short specification: - 550/391/195 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 32 MB of RAM (DDR1) - 4 MB of FLASH - 2T2R 2.4 GHz - 2x internal antennas (embedded on PCB) - 9x LED (all can be turned off with GPIO15), 2x button - UART (J3) header on PCB Flash instruction: use "factory" image directly in vendor GUI. Warning: this device does not include any kind of recovery mechanism in the bootloader and disassembling process is not trivial. You can access vendor firmware over serial line using: - login: root - password: sohoadmin Image was tested only in US version of the device, but should work also with the same device version sold in other countries. Available FLASH space, with LEDE trunk, is only 240 KB. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c103
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/tp-link.mk16
-rw-r--r--target/linux/ar71xx/mikrotik/config-default1
-rw-r--r--target/linux/ar71xx/nand/config-default1
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c43
14 files changed, 182 insertions, 5 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 7493c6ccba..ee67899d4f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -574,7 +574,8 @@ tl-wa801nd-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
-tl-wa850re)
+tl-wa850re|\
+tl-wa850re-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 5f80feffdb..d14fb428d8 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -108,6 +108,7 @@ ar71xx_setup_interfaces()
tl-wa801nd-v2|\
tl-wa830re-v2|\
tl-wa850re|\
+ tl-wa850re-v2|\
tl-wa901nd|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 82cf6c5a2e..a407a9979d 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -341,7 +341,8 @@ get_status_led() {
tl-wa750re)
status_led="tp-link:orange:re"
;;
- tl-wa850re)
+ tl-wa850re|\
+ tl-wa850re-v2)
status_led="tp-link:blue:re"
;;
tl-wa860re)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index b8ec325409..44dd9c4d49 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -998,6 +998,9 @@ ar71xx_board_detect() {
*TL-WA850RE)
name="tl-wa850re"
;;
+ *"TL-WA850RE v2")
+ name="tl-wa850re-v2"
+ ;;
*TL-WA860RE)
name="tl-wa860re"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 76273b30e0..3b7db4699a 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -401,6 +401,7 @@ platform_check_image() {
tl-wa801nd-v3|\
tl-wa830re-v2|\
tl-wa850re|\
+ tl-wa850re-v2|\
tl-wa860re|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index d3be103350..3902aeed5f 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -172,6 +172,7 @@ CONFIG_ATH79_MACH_TL_WA701ND_V2=y
CONFIG_ATH79_MACH_TL_WA7210N_V2=y
CONFIG_ATH79_MACH_TL_WA801ND_V3=y
CONFIG_ATH79_MACH_TL_WA830RE_V2=y
+CONFIG_ATH79_MACH_TL_WA850RE_V2=y
CONFIG_ATH79_MACH_TL_WA901ND=y
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
CONFIG_ATH79_MACH_TL_WA901ND_V4=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 873befaec8..14490e27f7 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1395,6 +1395,15 @@ config ATH79_MACH_TL_WA830RE_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WA850RE_V2
+ bool "TP-LINK TL-WA850RE v2 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WA901ND
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
select SOC_AR724X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 5baa77d3aa..aab8d6e8d0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -176,6 +176,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o
obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA850RE_V2) += mach-tl-wax50re.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V4) += mach-tl-wa901nd-v4.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
index 965b1cd3b8..d7a1af4e2c 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
@@ -1,9 +1,13 @@
/*
- * TP-LINK TL-WA750RE v1/TL-WA801ND v2/TL-WA850RE v1/TL-WA901ND v3
- * board support
+ * Support for TP-Link boards:
+ * - TL-WA750RE v1
+ * - TL-WA801ND v2
+ * - TL-WA850RE v1/v2
+ * - TL-WA901ND v3
*
* Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com>
* Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us>
+ * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -33,6 +37,17 @@
#define TL_WAX50RE_GPIO_LED_SIGNAL4 3
#define TL_WAX50RE_GPIO_LED_SIGNAL5 4
+#define TL_WA850RE_V2_GPIO_LED_LAN 14
+#define TL_WA850RE_V2_GPIO_LED_RE 12
+#define TL_WA850RE_V2_GPIO_LED_SIGNAL1 0
+#define TL_WA850RE_V2_GPIO_LED_SIGNAL2 1
+#define TL_WA850RE_V2_GPIO_LED_SIGNAL3 2
+#define TL_WA850RE_V2_GPIO_LED_SIGNAL4 3
+#define TL_WA850RE_V2_GPIO_LED_SIGNAL5 4
+#define TL_WA850RE_V2_GPIO_LED_WLAN 13
+
+#define TL_WA850RE_V2_GPIO_ENABLE_LEDS 15
+
#define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0
#define TL_WA860RE_GPIO_LED_WLAN_GREEN 2
#define TL_WA860RE_GPIO_LED_POWER_ORANGE 12
@@ -133,6 +148,42 @@ static struct gpio_led tl_wa850re_leds_gpio[] __initdata = {
},
};
+static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:lan",
+ .gpio = TL_WA850RE_V2_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:re",
+ .gpio = TL_WA850RE_V2_GPIO_LED_RE,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal1",
+ .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal2",
+ .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal3",
+ .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal4",
+ .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal5",
+ .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL5,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:wlan",
+ .gpio = TL_WA850RE_V2_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
{
.name = "tp-link:green:lan",
@@ -242,6 +293,30 @@ static void __init tl_ap123_setup(void)
ath79_register_wmac(ee, mac);
}
+static void __init tl_ap143_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f3c0008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
+ ath79_register_eth(0);
+
+ ath79_init_mac(tmpmac, mac, 0);
+ ath79_register_wmac(ee, mac);
+}
+
static void __init tl_wa750re_setup(void)
{
tl_ap123_setup();
@@ -284,6 +359,30 @@ static void __init tl_wa850re_setup(void)
MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE",
tl_wa850re_setup);
+static void __init tl_wa850re_v2_setup(void)
+{
+ tl_ap143_setup();
+
+ /* For GPIO 0~4 */
+ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+ AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ /* Allow to enable/disable all LEDs from userspace */
+ gpio_request_one(TL_WA850RE_V2_GPIO_ENABLE_LEDS,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LEDs enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_v2_leds_gpio),
+ tl_wa850re_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wax50re_gpio_keys),
+ tl_wax50re_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2",
+ "TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup);
+
static void __init tl_wa860re_setup(void)
{
tl_ap123_setup();
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 2a8d3398fd..446631f14b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -206,6 +206,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WA801ND_V3, /* TP-LINK TL-WA801ND v3 */
ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
+ ATH79_MACH_TL_WA850RE_V2, /* TP-LINK TL-WA850RE v2 */
ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */
ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 4d95f4822e..34b5390fca 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -981,6 +981,20 @@ define Device/tl-wa850re-v1
TPLINK_HWID := 0x08500001
endef
+define Device/tl-wa850re-v2
+ $(Device/tplink)
+ DEVICE_TITLE := TP-LINK TL-WA850RE v2
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME := TL-WA850RE-V2
+ DEVICE_PROFILE := TLWA850
+ TPLINK_BOARD_NAME := TLWA850REV2
+ TPLINK_HWID := 0x08500002
+ KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-kernel
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware)
+endef
+
define Device/tl-wa860re-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA860RE
@@ -988,7 +1002,7 @@ define Device/tl-wa860re-v1
DEVICE_PROFILE := TLWA860
TPLINK_HWID := 0x08600001
endef
-TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
+TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa850re-v2 tl-wa860re-v1
define Device/tl-wa901nd-v1
$(Device/tplink-4m)
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 324c6f72f4..a55952d793 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -137,6 +137,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
+# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
# CONFIG_ATH79_MACH_TL_WA901ND is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 1cad3a06e1..3d3e256c83 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -124,6 +124,7 @@
# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
+# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
# CONFIG_ATH79_MACH_TL_WA901ND is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index a1dc987fb5..a872cbaa4b 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -427,6 +427,49 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the TL-WA850RE v2 */
+ {
+ .id = "TLWA850REV2",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
+ "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
+ .support_trail = '\x00',
+
+ /**
+ 576KB were moved from file-system to os-image
+ in comparison to the stock image
+ */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"os-image", 0x20000, 0x150000},
+ {"file-system", 0x170000, 0x240000},
+ {"partition-table", 0x3b0000, 0x02000},
+ {"default-mac", 0x3c0000, 0x00020},
+ {"pin", 0x3c0100, 0x00020},
+ {"product-info", 0x3c1000, 0x01000},
+ {"soft-version", 0x3c2000, 0x00100},
+ {"support-list", 0x3c3000, 0x01000},
+ {"profile", 0x3c4000, 0x08000},
+ {"user-config", 0x3d0000, 0x10000},
+ {"default-config", 0x3e0000, 0x10000},
+ {"radio", 0x3f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the TL-WR1043 v4 */
{
.id = "TLWR1043NDV4",