kernel: bump 5.4 to 5.4.112

Ran update_kernel.sh in a fresh clone without any existing toolchains.

Removed upstreamed:
  mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch

Build system : x86_64
Build-tested : ipq806x/R7800
Run-tested   : ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>

10 files changed, 220 insertions, 383 deletions

diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 746f75d212..29be92246d 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -6,10 +6,10 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .111
+LINUX_VERSION-5.4 = .112
 LINUX_VERSION-5.10 = .31
 
-LINUX_KERNEL_HASH-5.4.111 = 21626132658dc34cb41b7aa7b80ecf83751890a71ac1a63d77aea9d488271a03
+LINUX_KERNEL_HASH-5.4.112 = b8361d461a4254c86d4c68aa4ceab1debaa3b2ccc6785542d026837a4fc20ca4
 LINUX_KERNEL_HASH-5.10.31 = 54eef1a4d29a2582281375e028ac73c2c5d90dfa21500fa8c3b00e529a2b510d
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
diff --git a/target/linux/generic/hack-5.4/902-debloat_proc.patch b/target/linux/generic/hack-5.4/902-debloat_proc.patch
index d9febbada8..7d6c2b2d6e 100644
--- a/target/linux/generic/hack-5.4/902-debloat_proc.patch
+++ b/target/linux/generic/hack-5.4/902-debloat_proc.patch
@@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
 --- a/net/core/sock.c
 +++ b/net/core/sock.c
-@@ -3629,6 +3629,8 @@ static __net_initdata struct pernet_oper
+@@ -3623,6 +3623,8 @@ static __net_initdata struct pernet_oper
  
  static int __init proto_init(void)
  {
diff --git a/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
index 3590557a30..90f4199eab 100644
--- a/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ b/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
@@ -185,7 +185,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  		cfg->fc_flags |= RTF_REJECT;
  
  	if (rtm->rtm_type == RTN_LOCAL)
-@@ -6019,6 +6050,8 @@ static int ip6_route_dev_notify(struct n
+@@ -6021,6 +6052,8 @@ static int ip6_route_dev_notify(struct n
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
  		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@@ -194,7 +194,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
  		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
  #endif
-@@ -6030,6 +6063,7 @@ static int ip6_route_dev_notify(struct n
+@@ -6032,6 +6065,7 @@ static int ip6_route_dev_notify(struct n
  		in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  		in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
@@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  		in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
  #endif
  	}
-@@ -6222,6 +6256,8 @@ static int __net_init ip6_route_net_init
+@@ -6224,6 +6258,8 @@ static int __net_init ip6_route_net_init
  
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  	net->ipv6.fib6_has_custom_rules = false;
@@ -211,7 +211,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  	net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template,
  					       sizeof(*net->ipv6.ip6_prohibit_entry),
  					       GFP_KERNEL);
-@@ -6232,11 +6268,21 @@ static int __net_init ip6_route_net_init
+@@ -6234,11 +6270,21 @@ static int __net_init ip6_route_net_init
  			 ip6_template_metrics, true);
  	INIT_LIST_HEAD(&net->ipv6.ip6_prohibit_entry->rt6i_uncached);
  
@@ -234,7 +234,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
  	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
  			 ip6_template_metrics, true);
-@@ -6260,6 +6306,8 @@ out:
+@@ -6262,6 +6308,8 @@ out:
  	return ret;
  
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -243,7 +243,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  out_ip6_prohibit_entry:
  	kfree(net->ipv6.ip6_prohibit_entry);
  out_ip6_null_entry:
-@@ -6279,6 +6327,7 @@ static void __net_exit ip6_route_net_exi
+@@ -6281,6 +6329,7 @@ static void __net_exit ip6_route_net_exi
  	kfree(net->ipv6.ip6_null_entry);
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  	kfree(net->ipv6.ip6_prohibit_entry);
@@ -251,7 +251,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  	kfree(net->ipv6.ip6_blk_hole_entry);
  #endif
  	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
-@@ -6356,6 +6405,9 @@ void __init ip6_route_init_special_entri
+@@ -6358,6 +6407,9 @@ void __init ip6_route_init_special_entri
  	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
  	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
  	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
diff --git a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
index 4c939e8017..7938751124 100644
--- a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
+++ b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
@@ -51,7 +51,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  	struct ethtool_eee *p = &priv->dev->ports[port].eee;
 --- a/drivers/net/dsa/lantiq_gswip.c
 +++ b/drivers/net/dsa/lantiq_gswip.c
-@@ -1508,7 +1508,9 @@ static void gswip_phylink_mac_link_down(
+@@ -1657,7 +1657,9 @@ static void gswip_phylink_mac_link_down(
  static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
  				      unsigned int mode,
  				      phy_interface_t interface,
diff --git a/target/linux/mediatek/patches-5.4/115-dts-bpi64-add-snand-support.patch b/target/linux/mediatek/patches-5.4/115-dts-bpi64-add-snand-support.patch
index aa0e347115..4d369cefef 100644
--- a/target/linux/mediatek/patches-5.4/115-dts-bpi64-add-snand-support.patch
+++ b/target/linux/mediatek/patches-5.4/115-dts-bpi64-add-snand-support.patch
@@ -1,6 +1,6 @@
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts	2021-03-13 13:46:37.057936814 +0200
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts	2021-03-13 13:49:26.957481217 +0200
-@@ -114,7 +114,7 @@
+--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
++++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+@@ -108,7 +108,7 @@
  };
  
  &bch {
@@ -9,7 +9,7 @@
  };
  
  &btif {
-@@ -259,14 +259,40 @@
+@@ -283,14 +283,40 @@
  	status = "disabled";
  };
  
diff --git a/target/linux/mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch b/target/linux/mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch
deleted file mode 100644
index 1fbbe8b506..0000000000
--- a/target/linux/mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: "Marek Behún" <kabel@kernel.org>
-To: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: "Marek Behún" <kabel@kernel.org>, Rui Salvaterra <rsalvaterra@gmail.com>, "Uwe Kleine-König" <uwe@kleine-koenig.org>, linux-arm-kernel@lists.infradead.org, Andrew Lunn <andrew@lunn.ch>, stable@vger.kernel.org
-Subject: [PATCH mvebu-dt] ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
-Date: Sun, 21 Feb 2021 00:11:44 +0100
-Message-Id: <20210220231144.32325-1-kabel@kernel.org>
-X-Mailer: git-send-email 2.26.2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
-of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.
-
-Without this the pin is by default in LED[2] mode, and the Marvell PHY
-driver configures LED[2] into "On - Link, Blink - Activity" mode.
-
-This fixes the issue where the pca9538 GPIO/interrupt controller (which
-can't mask interrupts in HW) received too many interrupts and after a
-time started ignoring the interrupt with error message:
-  IRQ 71: nobody cared
-
-There is a work in progress to have the Marvell PHY driver support
-parsing PHY LED nodes from OF and registering the LEDs as Linux LED
-class devices. Once this is done the PHY driver can also automatically
-set the pin into INTn mode if it does not find LED[2] in OF.
-
-Until then, though, we fix this via `marvell,reg-init` DT property.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: <stable@vger.kernel.org>
-
----
-
-This patch fixes bug introduced with the commit that added Turris
-Omnia's DTS (26ca8b52d6e1), but will not apply cleanly because there is
-commit 8ee4a5f4f40d which changed node name and node compatible
-property and this commit did not go into stable.
-
-So either commit 8ee4a5f4f40d has also to go into stable before this, or
-this patch has to be fixed a little in order to apply to 4.14+.
-
-Please let me know how should I handle this.
-
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -254,6 +254,7 @@
- 		status = "okay";
- 		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
- 		reg = <1>;
-+		marvell,reg-init = <3 18 0 0x4985>;
- 
- 		/* irq is connected to &pcawan pin 7 */
- 	};
diff --git a/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch b/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch
index 64ffd719ac..eb254ee74d 100644
--- a/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch
+++ b/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch
@@ -1,8 +1,17 @@
-diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
-index 581d23287333..487899d4cc3f 100644
 --- a/drivers/pwm/pwm-sun4i.c
 +++ b/drivers/pwm/pwm-sun4i.c
-@@ -16,6 +16,7 @@
+@@ -3,6 +3,10 @@
+  * Driver for Allwinner sun4i Pulse Width Modulation Controller
+  *
+  * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
++ *
++ * Limitations:
++ * - When outputing the source clock directly, the PWM logic will be bypassed
++ *   and the currently running period is not guaranteed to be completed
+  */
+ 
+ #include <linux/bitops.h>
+@@ -16,6 +20,7 @@
  #include <linux/of_device.h>
  #include <linux/platform_device.h>
  #include <linux/pwm.h>
@@ -10,182 +19,70 @@ index 581d23287333..487899d4cc3f 100644
  #include <linux/slab.h>
  #include <linux/spinlock.h>
  #include <linux/time.h>
-@@ -78,6 +79,7 @@ struct sun4i_pwm_data {
+@@ -72,12 +77,15 @@ static const u32 prescaler_table[] = {
+ 
+ struct sun4i_pwm_data {
+ 	bool has_prescaler_bypass;
++	bool has_direct_mod_clk_output;
+ 	unsigned int npwm;
+ };
+ 
  struct sun4i_pwm_chip {
  	struct pwm_chip chip;
++	struct clk *bus_clk;
  	struct clk *clk;
 +	struct reset_control *rst;
  	void __iomem *base;
  	spinlock_t ctrl_lock;
  	const struct sun4i_pwm_data *data;
-@@ -364,6 +366,22 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
- 	if (IS_ERR(pwm->clk))
- 		return PTR_ERR(pwm->clk);
- 
-+	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
-+	if (IS_ERR(pwm->rst)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get reset failed %pe\n",
-+				pwm->rst);
-+		return PTR_ERR(pwm->rst);
-+	}
-+
-+	/* Deassert reset */
-+	ret = reset_control_deassert(pwm->rst);
-+	if (ret) {
-+		dev_err(&pdev->dev, "cannot deassert reset control: %pe\n",
-+			ERR_PTR(ret));
-+		return ret;
-+	}
-+
- 	pwm->chip.dev = &pdev->dev;
- 	pwm->chip.ops = &sun4i_pwm_ops;
- 	pwm->chip.base = -1;
-@@ -376,19 +394,31 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
- 	ret = pwmchip_add(&pwm->chip);
- 	if (ret < 0) {
- 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
--		return ret;
-+		goto err_pwm_add;
- 	}
- 
- 	platform_set_drvdata(pdev, pwm);
- 
- 	return 0;
-+
-+err_pwm_add:
-+	reset_control_assert(pwm->rst);
-+
-+	return ret;
- }
- 
- static int sun4i_pwm_remove(struct platform_device *pdev)
- {
- 	struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
-+	int ret;
-+
-+	ret = pwmchip_remove(&pwm->chip);
-+	if (ret)
-+		return ret;
-+
-+	reset_control_assert(pwm->rst);
+@@ -115,6 +123,20 @@ static void sun4i_pwm_get_state(struct p
  
--	return pwmchip_remove(&pwm->chip);
-+	return 0;
- }
- 
- static struct platform_driver sun4i_pwm_driver = {
-
-diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
-index 487899d4cc3f..80026167044b 100644
---- a/drivers/pwm/pwm-sun4i.c
-+++ b/drivers/pwm/pwm-sun4i.c
-@@ -362,9 +362,34 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
- 	if (IS_ERR(pwm->base))
- 		return PTR_ERR(pwm->base);
+ 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
  
--	pwm->clk = devm_clk_get(&pdev->dev, NULL);
--	if (IS_ERR(pwm->clk))
 +	/*
-+	 * All hardware variants need a source clock that is divided and
-+	 * then feeds the counter that defines the output wave form. In the
-+	 * device tree this clock is either unnamed or called "mod".
-+	 * Some variants (e.g. H6) need another clock to access the
-+	 * hardware registers; this is called "bus".
-+	 * So we request "mod" first (and ignore the corner case that a
-+	 * parent provides a "mod" clock while the right one would be the
-+	 * unnamed one of the PWM device) and if this is not found we fall
-+	 * back to the first clock of the PWM.
++	 * PWM chapter in H6 manual has a diagram which explains that if bypass
++	 * bit is set, no other setting has any meaning. Even more, experiment
++	 * proved that also enable bit is ignored in this case.
 +	 */
-+	pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
-+	if (IS_ERR(pwm->clk)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get mod clock failed %pe\n",
-+				pwm->clk);
- 		return PTR_ERR(pwm->clk);
++	if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) &&
++	    sun4i_pwm->data->has_direct_mod_clk_output) {
++		state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate);
++		state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2);
++		state->polarity = PWM_POLARITY_NORMAL;
++		state->enabled = true;
++		return;
 +	}
 +
-+	if (!pwm->clk) {
-+		pwm->clk = devm_clk_get(&pdev->dev, NULL);
-+		if (IS_ERR(pwm->clk)) {
-+			if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+				dev_err(&pdev->dev, "get unnamed clock failed %pe\n",
-+					pwm->clk);
-+			return PTR_ERR(pwm->clk);
-+		}
-+	}
+ 	if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
+ 	    sun4i_pwm->data->has_prescaler_bypass)
+ 		prescaler = 1;
+@@ -146,13 +168,24 @@ static void sun4i_pwm_get_state(struct p
  
- 	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
- 	if (IS_ERR(pwm->rst)) {
-
-diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
-index 80026167044b..a6727dd89e28 100644
---- a/drivers/pwm/pwm-sun4i.c
-+++ b/drivers/pwm/pwm-sun4i.c
-@@ -78,6 +78,7 @@ struct sun4i_pwm_data {
+ static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
+ 			       const struct pwm_state *state,
+-			       u32 *dty, u32 *prd, unsigned int *prsclr)
++			       u32 *dty, u32 *prd, unsigned int *prsclr,
++			       bool *bypass)
+ {
+ 	u64 clk_rate, div = 0;
+ 	unsigned int pval, prescaler = 0;
  
- struct sun4i_pwm_chip {
- 	struct pwm_chip chip;
-+	struct clk *bus_clk;
- 	struct clk *clk;
- 	struct reset_control *rst;
- 	void __iomem *base;
-@@ -391,6 +392,14 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
- 		}
- 	}
+ 	clk_rate = clk_get_rate(sun4i_pwm->clk);
  
-+	pwm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
-+	if (IS_ERR(pwm->bus_clk)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get bus clock failed %pe\n",
-+				pwm->bus_clk);
-+		return PTR_ERR(pwm->bus_clk);
-+	}
++	*bypass = sun4i_pwm->data->has_direct_mod_clk_output &&
++		  state->enabled &&
++		  (state->period * clk_rate >= NSEC_PER_SEC) &&
++		  (state->period * clk_rate < 2 * NSEC_PER_SEC) &&
++		  (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC);
 +
- 	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
- 	if (IS_ERR(pwm->rst)) {
- 		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-@@ -407,6 +416,17 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
- 		return ret;
- 	}
- 
-+	/*
-+	 * We're keeping the bus clock on for the sake of simplicity.
-+	 * Actually it only needs to be on for hardware register accesses.
-+	 */
-+	ret = clk_prepare_enable(pwm->bus_clk);
-+	if (ret) {
-+		dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n",
-+			ERR_PTR(ret));
-+		goto err_bus;
-+	}
++	/* Skip calculation of other parameters if we bypass them */
++	if (*bypass)
++		return 0;
 +
- 	pwm->chip.dev = &pdev->dev;
- 	pwm->chip.ops = &sun4i_pwm_ops;
- 	pwm->chip.base = -1;
-@@ -427,6 +447,8 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
- 	return 0;
- 
- err_pwm_add:
-+	clk_disable_unprepare(pwm->bus_clk);
-+err_bus:
- 	reset_control_assert(pwm->rst);
- 
- 	return ret;
-@@ -441,6 +463,7 @@ static int sun4i_pwm_remove(struct platform_device *pdev)
- 	if (ret)
- 		return ret;
- 
-+	clk_disable_unprepare(pwm->bus_clk);
- 	reset_control_assert(pwm->rst);
- 
- 	return 0;
-
-diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
-index a6727dd89e28..e369b5a398f4 100644
---- a/drivers/pwm/pwm-sun4i.c
-+++ b/drivers/pwm/pwm-sun4i.c
-@@ -202,9 +202,9 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ 	if (sun4i_pwm->data->has_prescaler_bypass) {
+ 		/* First, test without any prescaler when available */
+ 		prescaler = PWM_PRESCAL_MASK;
+@@ -200,10 +233,11 @@ static int sun4i_pwm_apply(struct pwm_ch
  {
  	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
  	struct pwm_state cstate;
@@ -195,9 +92,11 @@ index a6727dd89e28..e369b5a398f4 100644
 -	unsigned int delay_us;
 +	unsigned int delay_us, prescaler;
  	unsigned long now;
++	bool bypass;
  
  	pwm_get_state(pwm, &cstate);
-@@ -220,43 +220,37 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ 
+@@ -218,43 +252,50 @@ static int sun4i_pwm_apply(struct pwm_ch
  	spin_lock(&sun4i_pwm->ctrl_lock);
  	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
  
@@ -205,30 +104,40 @@ index a6727dd89e28..e369b5a398f4 100644
 -	    (cstate.duty_cycle != state->duty_cycle)) {
 -		u32 period, duty, val;
 -		unsigned int prescaler;
--
++	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
++				  &bypass);
++	if (ret) {
++		dev_err(chip->dev, "period exceeds the maximum value\n");
++		spin_unlock(&sun4i_pwm->ctrl_lock);
++		if (!cstate.enabled)
++			clk_disable_unprepare(sun4i_pwm->clk);
++		return ret;
++	}
+ 
 -		ret = sun4i_pwm_calculate(sun4i_pwm, state,
 -					  &duty, &period, &prescaler);
 -		if (ret) {
 -			dev_err(chip->dev, "period exceeds the maximum value\n");
--			spin_unlock(&sun4i_pwm->ctrl_lock);
++	if (sun4i_pwm->data->has_direct_mod_clk_output) {
++		if (bypass) {
++			ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
++			/* We can skip other parameter */
++			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
+ 			spin_unlock(&sun4i_pwm->ctrl_lock);
 -			if (!cstate.enabled)
 -				clk_disable_unprepare(sun4i_pwm->clk);
 -			return ret;
--		}
--
++			return 0;
++		} else {
++			ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm);
+ 		}
++	}
+ 
 -		if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
 -			/* Prescaler changed, the clock has to be gated */
 -			ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
 -			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
-+	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler);
-+	if (ret) {
-+		dev_err(chip->dev, "period exceeds the maximum value\n");
-+		spin_unlock(&sun4i_pwm->ctrl_lock);
-+		if (!cstate.enabled)
-+			clk_disable_unprepare(sun4i_pwm->clk);
-+		return ret;
-+	}
- 
+-
 -			ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
 -			ctrl |= BIT_CH(prescaler, pwm->hwpwm);
 -		}
@@ -262,120 +171,7 @@ index a6727dd89e28..e369b5a398f4 100644
  	if (state->enabled) {
  		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
  	} else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
-
-diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
-index e369b5a398f4..07bf7be6074b 100644
---- a/drivers/pwm/pwm-sun4i.c
-+++ b/drivers/pwm/pwm-sun4i.c
-@@ -3,6 +3,10 @@
-  * Driver for Allwinner sun4i Pulse Width Modulation Controller
-  *
-  * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
-+ *
-+ * Limitations:
-+ * - When outputing the source clock directly, the PWM logic will be bypassed
-+ *   and the currently running period is not guaranteed to be completed
-  */
- 
- #include <linux/bitops.h>
-@@ -73,6 +77,7 @@ static const u32 prescaler_table[] = {
- 
- struct sun4i_pwm_data {
- 	bool has_prescaler_bypass;
-+	bool has_direct_mod_clk_output;
- 	unsigned int npwm;
- };
- 
-@@ -118,6 +123,20 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
- 
- 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- 
-+	/*
-+	 * PWM chapter in H6 manual has a diagram which explains that if bypass
-+	 * bit is set, no other setting has any meaning. Even more, experiment
-+	 * proved that also enable bit is ignored in this case.
-+	 */
-+	if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) &&
-+	    sun4i_pwm->data->has_direct_mod_clk_output) {
-+		state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate);
-+		state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2);
-+		state->polarity = PWM_POLARITY_NORMAL;
-+		state->enabled = true;
-+		return;
-+	}
-+
- 	if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
- 	    sun4i_pwm->data->has_prescaler_bypass)
- 		prescaler = 1;
-@@ -149,13 +168,24 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
- 
- static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
- 			       const struct pwm_state *state,
--			       u32 *dty, u32 *prd, unsigned int *prsclr)
-+			       u32 *dty, u32 *prd, unsigned int *prsclr,
-+			       bool *bypass)
- {
- 	u64 clk_rate, div = 0;
- 	unsigned int pval, prescaler = 0;
- 
- 	clk_rate = clk_get_rate(sun4i_pwm->clk);
- 
-+	*bypass = sun4i_pwm->data->has_direct_mod_clk_output &&
-+		  state->enabled &&
-+		  (state->period * clk_rate >= NSEC_PER_SEC) &&
-+		  (state->period * clk_rate < 2 * NSEC_PER_SEC) &&
-+		  (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC);
-+
-+	/* Skip calculation of other parameters if we bypass them */
-+	if (*bypass)
-+		return 0;
-+
- 	if (sun4i_pwm->data->has_prescaler_bypass) {
- 		/* First, test without any prescaler when available */
- 		prescaler = PWM_PRESCAL_MASK;
-@@ -206,6 +236,7 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
- 	int ret;
- 	unsigned int delay_us, prescaler;
- 	unsigned long now;
-+	bool bypass;
- 
- 	pwm_get_state(pwm, &cstate);
- 
-@@ -220,7 +251,8 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
- 	spin_lock(&sun4i_pwm->ctrl_lock);
- 	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- 
--	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler);
-+	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
-+				  &bypass);
- 	if (ret) {
- 		dev_err(chip->dev, "period exceeds the maximum value\n");
- 		spin_unlock(&sun4i_pwm->ctrl_lock);
-@@ -229,6 +261,18 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
- 		return ret;
- 	}
- 
-+	if (sun4i_pwm->data->has_direct_mod_clk_output) {
-+		if (bypass) {
-+			ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
-+			/* We can skip other parameter */
-+			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
-+			spin_unlock(&sun4i_pwm->ctrl_lock);
-+			return 0;
-+		} else {
-+			ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm);
-+		}
-+	}
-+
- 	if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
- 		/* Prescaler changed, the clock has to be gated */
- 		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-
-diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
-index 07bf7be6074b..c394878c7e5d 100644
---- a/drivers/pwm/pwm-sun4i.c
-+++ b/drivers/pwm/pwm-sun4i.c
-@@ -360,6 +360,12 @@ static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
+@@ -320,6 +361,12 @@ static const struct sun4i_pwm_data sun4i
  	.npwm = 1,
  };
  
@@ -388,13 +184,122 @@ index 07bf7be6074b..c394878c7e5d 100644
  static const struct of_device_id sun4i_pwm_dt_ids[] = {
  	{
  		.compatible = "allwinner,sun4i-a10-pwm",
-@@ -376,6 +382,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
- 	}, {
+@@ -337,6 +384,9 @@ static const struct of_device_id sun4i_p
  		.compatible = "allwinner,sun8i-h3-pwm",
  		.data = &sun4i_pwm_single_bypass,
-+	}, {
+ 	}, {
 +		.compatible = "allwinner,sun50i-h6-pwm",
 +		.data = &sun50i_h6_pwm_data,
- 	}, {
++	}, {
  		/* sentinel */
  	},
+ };
+@@ -361,9 +411,69 @@ static int sun4i_pwm_probe(struct platfo
+ 	if (IS_ERR(pwm->base))
+ 		return PTR_ERR(pwm->base);
+ 
+-	pwm->clk = devm_clk_get(&pdev->dev, NULL);
+-	if (IS_ERR(pwm->clk))
++	/*
++	 * All hardware variants need a source clock that is divided and
++	 * then feeds the counter that defines the output wave form. In the
++	 * device tree this clock is either unnamed or called "mod".
++	 * Some variants (e.g. H6) need another clock to access the
++	 * hardware registers; this is called "bus".
++	 * So we request "mod" first (and ignore the corner case that a
++	 * parent provides a "mod" clock while the right one would be the
++	 * unnamed one of the PWM device) and if this is not found we fall
++	 * back to the first clock of the PWM.
++	 */
++	pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
++	if (IS_ERR(pwm->clk)) {
++		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
++			dev_err(&pdev->dev, "get mod clock failed %pe\n",
++				pwm->clk);
+ 		return PTR_ERR(pwm->clk);
++	}
++
++	if (!pwm->clk) {
++		pwm->clk = devm_clk_get(&pdev->dev, NULL);
++		if (IS_ERR(pwm->clk)) {
++			if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
++				dev_err(&pdev->dev, "get unnamed clock failed %pe\n",
++					pwm->clk);
++			return PTR_ERR(pwm->clk);
++		}
++	}
++
++	pwm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
++	if (IS_ERR(pwm->bus_clk)) {
++		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
++			dev_err(&pdev->dev, "get bus clock failed %pe\n",
++				pwm->bus_clk);
++		return PTR_ERR(pwm->bus_clk);
++	}
++
++	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
++	if (IS_ERR(pwm->rst)) {
++		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
++			dev_err(&pdev->dev, "get reset failed %pe\n",
++				pwm->rst);
++		return PTR_ERR(pwm->rst);
++	}
++
++	/* Deassert reset */
++	ret = reset_control_deassert(pwm->rst);
++	if (ret) {
++		dev_err(&pdev->dev, "cannot deassert reset control: %pe\n",
++			ERR_PTR(ret));
++		return ret;
++	}
++
++	/*
++	 * We're keeping the bus clock on for the sake of simplicity.
++	 * Actually it only needs to be on for hardware register accesses.
++	 */
++	ret = clk_prepare_enable(pwm->bus_clk);
++	if (ret) {
++		dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n",
++			ERR_PTR(ret));
++		goto err_bus;
++	}
+ 
+ 	pwm->chip.dev = &pdev->dev;
+ 	pwm->chip.ops = &sun4i_pwm_ops;
+@@ -377,19 +487,34 @@ static int sun4i_pwm_probe(struct platfo
+ 	ret = pwmchip_add(&pwm->chip);
+ 	if (ret < 0) {
+ 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+-		return ret;
++		goto err_pwm_add;
+ 	}
+ 
+ 	platform_set_drvdata(pdev, pwm);
+ 
+ 	return 0;
++
++err_pwm_add:
++	clk_disable_unprepare(pwm->bus_clk);
++err_bus:
++	reset_control_assert(pwm->rst);
++
++	return ret;
+ }
+ 
+ static int sun4i_pwm_remove(struct platform_device *pdev)
+ {
+ 	struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
++	int ret;
++
++	ret = pwmchip_remove(&pwm->chip);
++	if (ret)
++		return ret;
+ 
+-	return pwmchip_remove(&pwm->chip);
++	clk_disable_unprepare(pwm->bus_clk);
++	reset_control_assert(pwm->rst);
++
++	return 0;
+ }
+ 
+ static struct platform_driver sun4i_pwm_driver = {
diff --git a/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch b/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
index 60e653dcba..c14e729539 100644
--- a/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
+++ b/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
@@ -14,11 +14,9 @@ Signed-off-by: Clément Péron <peron.clem@gmail.com>
  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
  1 file changed, 10 insertions(+)
 
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-index 29824081b43b..6d4bde488f15 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-@@ -245,6 +245,16 @@
+@@ -231,6 +231,16 @@
  			status = "disabled";
  		};
  
diff --git a/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch b/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
index d95c3c8987..8ebbe3fad8 100644
--- a/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
+++ b/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
@@ -1,10 +1,8 @@
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-index f335f7482a73..cf684bc7374d 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-@@ -45,3 +45,7 @@
- 		reg = <1>;
- 	};
+@@ -10,3 +10,7 @@
+ 	model = "OrangePi One Plus";
+ 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
  };
 +
 +&pwm {
diff --git a/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch b/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch
index 5f7974c609..88c466d9b9 100644
--- a/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch
+++ b/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch
@@ -1,8 +1,6 @@
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-index 12e1756..79139f3 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-@@ -9,4 +9,39 @@
+@@ -9,6 +9,41 @@
  / {
  	model = "OrangePi One Plus";
  	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
@@ -42,3 +40,5 @@ index 12e1756..79139f3 100644
 +		reg = <1>;
 +	};
  };
+ 
+ &pwm {