diff options
author | Daniel Kestrel <kestrel1974@t-online.de> | 2021-06-24 17:41:33 +0200 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-01-06 00:23:08 +0100 |
commit | 43422deed3939073a2acc23fcc33e18ab3a11924 (patch) | |
tree | 1df579c5a87df344f72a0d1b960443310d3845e2 | |
parent | 006fee0dadd184aab8a1a18d629674f8f06e9eda (diff) | |
download | upstream-43422deed3939073a2acc23fcc33e18ab3a11924.tar.gz upstream-43422deed3939073a2acc23fcc33e18ab3a11924.tar.bz2 upstream-43422deed3939073a2acc23fcc33e18ab3a11924.zip |
ltq-deu: add aes_xts algorithm
The lantiq AES hardware does not support the xts algorithm. Apart
from the cipher text stealing (XTS), the AES XTS implementation is
just an XOR with the IV, followed by AES ECB, followed by another
XOR with the IV and as such can be also implemented by using the
lantiq hardware's CBC AES implemention plus one additional XOR with
the IV in the driver. The output IV by CBC AES is also not usable
and the gfmul operation not supported by lantiq hardware. Both need
to be done in the driver too in addition to the IV treatment which is
the initial encryption by the other half of the input key and to
set the IV to the IV registers for every block.
In the generic kernel implementation, the block size for XTS is set
to 16 bytes, although the algorithm is designed to process any size
of input larger than 16 bytes. But since there is no way to
indicate a minimum input length, the block size is used. This leads
to certain issues when the skcipher walk functions are used, e.g.
processing less than block size bytes is not supported by calling
skcipher_walk_done.
The walksize is 2 AES blocks because otherwise for splitted input
or output data, less than blocksize is to be returned in some cases,
which cannot be processed. Another issue was that depending on
possible split of input/output data, just 16 bytes are returned while
less than 16 bytes were remaining, while cipher text stealing
requires 17 bytes or more for processing.
For example, if the input is 60 bytes and the walk is 48, then
processing 48 bytes leads to a return code of -EINVAL for
skcipher_walk_done. Therefor the processed counter is used to
figure out, when the actual cipher text stealing for the remaining
bytes less than blocksize needs to be applied.
Measured with cryptsetup benchmark, this XTS AES implementation is
about 19% faster than the kernels XTS implementation that uses the
hardware ECB AES (ca. 18.6 MiB/s vs. 15.8 MiB/s decryption 256b key).
The implementation was tested with the kernels crypto testmgr against
the kernels generic XTS AES implementation including extended tests.
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
-rw-r--r-- | package/kernel/lantiq/ltq-deu/src/ifxmips_aes.c | 324 |
1 files changed, 324 insertions, 0 deletions
diff --git a/package/kernel/lantiq/ltq-deu/src/ifxmips_aes.c b/package/kernel/lantiq/ltq-deu/src/ifxmips_aes.c index e0adc18d62..1853e0e9de 100644 --- a/package/kernel/lantiq/ltq-deu/src/ifxmips_aes.c +++ b/package/kernel/lantiq/ltq-deu/src/ifxmips_aes.c @@ -57,6 +57,10 @@ #include <linux/delay.h> #include <asm/byteorder.h> #include <crypto/algapi.h> +#include <crypto/b128ops.h> +#include <crypto/gf128mul.h> +#include <crypto/scatterwalk.h> +#include <crypto/xts.h> #include <crypto/internal/skcipher.h> #include "ifxmips_deu.h" @@ -115,7 +119,10 @@ extern void ifx_deu_aes (void *ctx_arg, uint8_t *out_arg, const uint8_t *in_arg, struct aes_ctx { int key_length; u32 buf[AES_MAX_KEY_SIZE]; + u32 tweakkey[AES_MAX_KEY_SIZE]; u8 nonce[CTR_RFC3686_NONCE_SIZE]; + u8 lastbuffer[4 * XTS_BLOCK_SIZE]; + int use_tweak; }; extern int disable_deudma; @@ -142,6 +149,7 @@ int aes_set_key (struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len) } ctx->key_length = key_len; + ctx->use_tweak = 0; DPRINTF(0, "ctx @%p, key_len %d, ctx->key_length %d\n", ctx, key_len, ctx->key_length); memcpy ((u8 *) (ctx->buf), in_key, key_len); @@ -190,6 +198,7 @@ void ifx_deu_aes (void *ctx_arg, u8 *out_arg, const u8 *in_arg, int i = 0; int byte_cnt = nbytes; + if (ctx->use_tweak) in_key = ctx->tweakkey; CRTCL_SECT_START; /* 128, 192 or 256 bit key length */ @@ -322,6 +331,7 @@ int ctr_rfc3686_aes_set_key (struct crypto_tfm *tfm, const uint8_t *in_key, unsi } ctx->key_length = key_len; + ctx->use_tweak = 0; memcpy ((u8 *) (ctx->buf), in_key, key_len); @@ -645,6 +655,312 @@ struct skcipher_alg ifxdeu_cbc_aes_alg = { .decrypt = cbc_aes_decrypt, }; +/*! \fn void ifx_deu_aes_xts (void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, size_t nbytes, int encdec) + * \ingroup IFX_AES_FUNCTIONS + * \brief main interface to AES hardware for XTS impl + * \param ctx_arg crypto algo context + * \param out_arg output bytestream + * \param in_arg input bytestream + * \param iv_arg initialization vector + * \param nbytes length of bytestream + * \param encdec 1 for encrypt; 0 for decrypt + * +*/ +void ifx_deu_aes_xts (void *ctx_arg, u8 *out_arg, const u8 *in_arg, + u8 *iv_arg, size_t nbytes, int encdec) +{ + /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ + volatile struct aes_t *aes = (volatile struct aes_t *) AES_START; + struct aes_ctx *ctx = (struct aes_ctx *)ctx_arg; + u32 *in_key = ctx->buf; + unsigned long flag; + /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ + int key_len = ctx->key_length; + u8 oldiv[16]; + int i = 0; + int byte_cnt = nbytes; + + CRTCL_SECT_START; + + //prepare the key + /* 128, 192 or 256 bit key length */ + aes->controlr.K = key_len / 8 - 2; + if (key_len == 128 / 8) { + aes->K3R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 0)); + aes->K2R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 1)); + aes->K1R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 2)); + aes->K0R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 3)); + } + else if (key_len == 192 / 8) { + aes->K5R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 0)); + aes->K4R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 1)); + aes->K3R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 2)); + aes->K2R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 3)); + aes->K1R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 4)); + aes->K0R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 5)); + } + else if (key_len == 256 / 8) { + aes->K7R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 0)); + aes->K6R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 1)); + aes->K5R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 2)); + aes->K4R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 3)); + aes->K3R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 4)); + aes->K2R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 5)); + aes->K1R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 6)); + aes->K0R = DEU_ENDIAN_SWAP(*((u32 *) in_key + 7)); + } + else { + printk (KERN_ERR "[%s %s %d]: Invalid key_len : %d\n", __FILE__, __func__, __LINE__, key_len); + CRTCL_SECT_END; + return;// -EINVAL; + } + + /* let HW pre-process DEcryption key in any case (even if + ENcryption is used). Key Valid (KV) bit is then only + checked in decryption routine! */ + aes->controlr.PNK = 1; + + aes->controlr.E_D = !encdec; //encryption + aes->controlr.O = 1; //0 ECB 1 CBC 2 OFB 3 CFB 4 CTR - CBC mode for xts + + i = 0; + while (byte_cnt >= 16) { + + if (!encdec) { + if (((byte_cnt % 16) > 0) && (byte_cnt < (2*XTS_BLOCK_SIZE))) { + memcpy(oldiv, iv_arg, 16); + gf128mul_x_ble((le128 *)iv_arg, (le128 *)iv_arg); + } + u128_xor((u128 *)((u32 *) in_arg + (i * 4) + 0), (u128 *)((u32 *) in_arg + (i * 4) + 0), (u128 *)iv_arg); + } + + aes->IV3R = DEU_ENDIAN_SWAP(*(u32 *) iv_arg); + aes->IV2R = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 1)); + aes->IV1R = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 2)); + aes->IV0R = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 3)); + + aes->ID3R = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + (i * 4) + 0)); + aes->ID2R = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + (i * 4) + 1)); + aes->ID1R = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + (i * 4) + 2)); + aes->ID0R = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + (i * 4) + 3)); /* start crypto */ + + while (aes->controlr.BUS) { + // this will not take long + } + + *((volatile u32 *) out_arg + (i * 4) + 0) = aes->OD3R; + *((volatile u32 *) out_arg + (i * 4) + 1) = aes->OD2R; + *((volatile u32 *) out_arg + (i * 4) + 2) = aes->OD1R; + *((volatile u32 *) out_arg + (i * 4) + 3) = aes->OD0R; + + if (encdec) { + u128_xor((u128 *)((volatile u32 *) out_arg + (i * 4) + 0), (u128 *)((volatile u32 *) out_arg + (i * 4) + 0), (u128 *)iv_arg); + } + gf128mul_x_ble((le128 *)iv_arg, (le128 *)iv_arg); + i++; + byte_cnt -= 16; + } + + if (byte_cnt) { + u8 state[XTS_BLOCK_SIZE] = {0,}; + + if (!encdec) memcpy(iv_arg, oldiv, 16); + + aes->IV3R = DEU_ENDIAN_SWAP(*(u32 *) iv_arg); + aes->IV2R = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 1)); + aes->IV1R = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 2)); + aes->IV0R = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 3)); + + memcpy(state, ((u32 *) in_arg + (i * 4) + 0), byte_cnt); + memcpy((state + byte_cnt), (out_arg + ((i - 1) * 16) + byte_cnt), (XTS_BLOCK_SIZE - byte_cnt)); + if (!encdec) { + u128_xor((u128 *)state, (u128 *)state, (u128 *)iv_arg); + } + + aes->ID3R = INPUT_ENDIAN_SWAP(*((u32 *) state + 0)); + aes->ID2R = INPUT_ENDIAN_SWAP(*((u32 *) state + 1)); + aes->ID1R = INPUT_ENDIAN_SWAP(*((u32 *) state + 2)); + aes->ID0R = INPUT_ENDIAN_SWAP(*((u32 *) state + 3)); /* start crypto */ + + memcpy(((u32 *) out_arg + (i * 4) + 0), ((u32 *) out_arg + ((i - 1) * 4) + 0), byte_cnt); + + while (aes->controlr.BUS) { + // this will not take long + } + + *((volatile u32 *) out_arg + ((i-1) * 4) + 0) = aes->OD3R; + *((volatile u32 *) out_arg + ((i-1) * 4) + 1) = aes->OD2R; + *((volatile u32 *) out_arg + ((i-1) * 4) + 2) = aes->OD1R; + *((volatile u32 *) out_arg + ((i-1) * 4) + 3) = aes->OD0R; + + if (encdec) { + u128_xor((u128 *)((volatile u32 *) out_arg + ((i-1) * 4) + 0), (u128 *)((volatile u32 *) out_arg + ((i-1) * 4) + 0), (u128 *)iv_arg); + } + } + + CRTCL_SECT_END; +} + +/*! \fn int xts_aes_encrypt(struct skcipher_req *req) + * \ingroup IFX_AES_FUNCTIONS + * \brief XTS AES encrypt using linux crypto skcipher + * \param req skcipher request + * \return err +*/ +int xts_aes_encrypt(struct skcipher_request *req) +{ + struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm); + struct skcipher_walk walk; + int err; + unsigned int enc_bytes, nbytes, processed; + + err = skcipher_walk_virt(&walk, req, false); + + if (req->cryptlen < XTS_BLOCK_SIZE) + return -EINVAL; + + ctx->use_tweak = 1; + aes_encrypt(req->base.tfm, walk.iv, walk.iv); + ctx->use_tweak = 0; + processed = 0; + + while ((nbytes = walk.nbytes) && (walk.nbytes >= (XTS_BLOCK_SIZE * 2)) ) { + u8 *iv = walk.iv; + if (nbytes == walk.total) { + enc_bytes = nbytes; + } else { + enc_bytes = nbytes & ~(XTS_BLOCK_SIZE - 1); + if ((req->cryptlen - processed - enc_bytes) < (XTS_BLOCK_SIZE)) { + if (enc_bytes > (2 * XTS_BLOCK_SIZE)) { + enc_bytes -= XTS_BLOCK_SIZE; + } else { + break; + } + } + } + ifx_deu_aes_xts(ctx, walk.dst.virt.addr, walk.src.virt.addr, + iv, enc_bytes, CRYPTO_DIR_ENCRYPT); + err = skcipher_walk_done(&walk, nbytes - enc_bytes); + processed += enc_bytes; + } + + if ((walk.nbytes)) { + u8 *iv = walk.iv; + nbytes = req->cryptlen - processed; + scatterwalk_map_and_copy(ctx->lastbuffer, req->src, (req->cryptlen - nbytes), nbytes, 0); + ifx_deu_aes_xts(ctx, ctx->lastbuffer, ctx->lastbuffer, + iv, nbytes, CRYPTO_DIR_ENCRYPT); + scatterwalk_map_and_copy(ctx->lastbuffer, req->dst, (req->cryptlen - nbytes), nbytes, 1); + skcipher_request_complete(req, 0); + } + + return err; +} + +/*! \fn int xts_aes_decrypt(struct skcipher_req *req) + * \ingroup IFX_AES_FUNCTIONS + * \brief XTS AES decrypt using linux crypto skcipher + * \param req skcipher request + * \return err +*/ +int xts_aes_decrypt(struct skcipher_request *req) +{ + struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm); + struct skcipher_walk walk; + int err; + unsigned int dec_bytes, nbytes, processed; + + err = skcipher_walk_virt(&walk, req, false); + + if (req->cryptlen < XTS_BLOCK_SIZE) + return -EINVAL; + + ctx->use_tweak = 1; + aes_encrypt(req->base.tfm, walk.iv, walk.iv); + ctx->use_tweak = 0; + processed = 0; + + while ((nbytes = walk.nbytes) && (walk.nbytes >= (XTS_BLOCK_SIZE * 2))) { + u8 *iv = walk.iv; + if (nbytes == walk.total) { + dec_bytes = nbytes; + } else { + dec_bytes = nbytes & ~(XTS_BLOCK_SIZE - 1); + if ((req->cryptlen - processed - dec_bytes) < (XTS_BLOCK_SIZE)) { + if (dec_bytes > (2 * XTS_BLOCK_SIZE)) { + dec_bytes -= XTS_BLOCK_SIZE; + } else { + break; + } + } + } + ifx_deu_aes_xts(ctx, walk.dst.virt.addr, walk.src.virt.addr, + iv, dec_bytes, CRYPTO_DIR_DECRYPT); + err = skcipher_walk_done(&walk, nbytes - dec_bytes); + processed += dec_bytes; + } + + if ((walk.nbytes)) { + u8 *iv = walk.iv; + nbytes = req->cryptlen - processed; + scatterwalk_map_and_copy(ctx->lastbuffer, req->src, (req->cryptlen - nbytes), nbytes, 0); + ifx_deu_aes_xts(ctx, ctx->lastbuffer, ctx->lastbuffer, + iv, nbytes, CRYPTO_DIR_DECRYPT); + scatterwalk_map_and_copy(ctx->lastbuffer, req->dst, (req->cryptlen - nbytes), nbytes, 1); + skcipher_request_complete(req, 0); + } + + return err; +} + +/*! \fn int xts_aes_set_key_skcipher (struct crypto_tfm *tfm, const uint8_t *in_key, unsigned int key_len) + * \ingroup IFX_AES_FUNCTIONS + * \brief sets the AES keys for XTS + * \param tfm linux crypto algo transform + * \param in_key input key + * \param key_len key lengths of 16, 24 and 32 bytes supported + * \return -EINVAL - bad key length, 0 - SUCCESS +*/ +int xts_aes_set_key_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) +{ + struct aes_ctx *ctx = crypto_tfm_ctx(crypto_skcipher_tfm(tfm)); + unsigned int keylen = (key_len / 2); + + if (key_len % 2) return -EINVAL; + + if (keylen != 16 && keylen != 24 && keylen != 32) { + return -EINVAL; + } + + ctx->key_length = keylen; + ctx->use_tweak = 0; + DPRINTF(0, "ctx @%p, key_len %d, ctx->key_length %d\n", ctx, key_len, ctx->key_length); + memcpy ((u8 *) (ctx->buf), in_key, keylen); + memcpy ((u8 *) (ctx->tweakkey), in_key + keylen, keylen); + + return 0; +} + +/* + * \brief AES function mappings +*/ +struct skcipher_alg ifxdeu_xts_aes_alg = { + .base.cra_name = "xts(aes)", + .base.cra_driver_name = "ifxdeu-xts(aes)", + .base.cra_priority = 400, + .base.cra_flags = CRYPTO_ALG_TYPE_SKCIPHER | CRYPTO_ALG_KERN_DRIVER_ONLY, + .base.cra_blocksize = XTS_BLOCK_SIZE, + .base.cra_ctxsize = sizeof(struct aes_ctx), + .base.cra_module = THIS_MODULE, + .base.cra_list = LIST_HEAD_INIT(ifxdeu_xts_aes_alg.base.cra_list), + .min_keysize = AES_MIN_KEY_SIZE * 2, + .max_keysize = AES_MAX_KEY_SIZE * 2, + .ivsize = XTS_BLOCK_SIZE, + .walksize = 2 * XTS_BLOCK_SIZE, + .setkey = xts_aes_set_key_skcipher, + .encrypt = xts_aes_encrypt, + .decrypt = xts_aes_decrypt, +}; /*! \fn int ofb_aes_encrypt(struct skcipher_req *req) * \ingroup IFX_AES_FUNCTIONS @@ -1036,6 +1352,9 @@ int ifxdeu_init_aes (void) if ((ret = crypto_register_skcipher(&ifxdeu_cbc_aes_alg))) goto cbc_aes_err; + if ((ret = crypto_register_skcipher(&ifxdeu_xts_aes_alg))) + goto xts_aes_err; + if ((ret = crypto_register_skcipher(&ifxdeu_ofb_aes_alg))) goto ofb_aes_err; @@ -1070,6 +1389,10 @@ ofb_aes_err: crypto_unregister_skcipher(&ifxdeu_ofb_aes_alg); printk (KERN_ERR "IFX ofb_aes initialization failed!\n"); return ret; +xts_aes_err: + crypto_unregister_skcipher(&ifxdeu_xts_aes_alg); + printk (KERN_ERR "IFX xts_aes initialization failed!\n"); + return ret; cbc_aes_err: crypto_unregister_skcipher(&ifxdeu_cbc_aes_alg); printk (KERN_ERR "IFX cbc_aes initialization failed!\n"); @@ -1093,6 +1416,7 @@ void ifxdeu_fini_aes (void) crypto_unregister_alg (&ifxdeu_aes_alg); crypto_unregister_skcipher (&ifxdeu_ecb_aes_alg); crypto_unregister_skcipher (&ifxdeu_cbc_aes_alg); + crypto_unregister_skcipher (&ifxdeu_xts_aes_alg); crypto_unregister_skcipher (&ifxdeu_ofb_aes_alg); crypto_unregister_skcipher (&ifxdeu_cfb_aes_alg); crypto_unregister_skcipher (&ifxdeu_ctr_basic_aes_alg); |