diff options
| author | David Musil <0x444d@protonmail.com> | 2022-04-16 12:01:31 +0000 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2022-04-18 07:25:22 +0200 |
| commit | ad5a507df3de951ca8c87656f3bc7bda647ae4d3 (patch) | |
| tree | 44244951facc95b80cb54c9b54eb896acd468eaa | |
| parent | b78db9daa4ad6ac58aa488b9e9f047e94632289a (diff) | |
| download | upstream-ad5a507df3de951ca8c87656f3bc7bda647ae4d3.tar.gz upstream-ad5a507df3de951ca8c87656f3bc7bda647ae4d3.tar.bz2 upstream-ad5a507df3de951ca8c87656f3bc7bda647ae4d3.zip | |
ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)
The MikroTik RouterBOARD wAP-2nd (sold as wAP) is a small
2.4 GHz 802.11b/g/n PoE-capable AP.
Specifications:
- SoC: Qualcomm Atheros QCA9533
- Flash: 16 MB (SPI)
- RAM: 64 MB
- Ethernet: 1x 10/100 Mbps (PoE in)
- WiFi: AR9531 2T2R 2.4 GHz (SoC)
- 3x green LEDs (1x lan, 1x wlan, 1x user)
See https://mikrotik.com/product/RBwAP2nD for more info.
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d
The network setup avoids using the integrated switch and connects the
single Ethernet port directly. This way, link speed (10/100 Mbps) is
properly reported by eth0.
Signed-off-by: David Musil <0x444d@protonmail.com>
(cherry picked from commit e20de224427008e0f26161f924bc347d974fd15a)
5 files changed, 71 insertions, 1 deletions
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts new file mode 100644 index 0000000000..807941c608 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_mikrotik_routerboard-16m.dtsi" + +/ { + compatible = "mikrotik,routerboard-wap-2nd", "qca,qca9533"; + model = "MikroTik RouterBOARD wAP-2nD (wAP)"; + + aliases { + led-boot = &led_user; + led-failsafe = &led_user; + led-running = &led_user; + led-upgrade = &led_user; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_lan_pin>; + + lan { + label = "green:lan"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "green:wlan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_user: user { + label = "green:user"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <1>; + }; +}; + +ð1 { + compatible = "syscon", "simple-mfd"; +}; + +&pinmux { + led_lan_pin: pinmux_led_lan_pin { + pinctrl-single,bits = <0x4 0x0 0xff>; + }; +}; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index dccb05e45a..a0ce33fa9d 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -90,3 +90,11 @@ define Device/mikrotik_routerboard-wapr-2nd IMAGE_SIZE := 16256k endef TARGET_DEVICES += mikrotik_routerboard-wapr-2nd + +define Device/mikrotik_routerboard-wap-2nd + $(Device/mikrotik_nor) + SOC := qca9533 + DEVICE_MODEL := RouterBOARD wAP-2nD (wAP) + IMAGE_SIZE := 16256k +endef +TARGET_DEVICES += mikrotik_routerboard-wap-2nd diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds index ecc47e07c2..f5b927ea96 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -7,7 +7,8 @@ board=$(board_name) case "$board" in mikrotik,routerboard-lhg-2nd|\ -mikrotik,routerboard-mapl-2nd) +mikrotik,routerboard-mapl-2nd|\ +mikrotik,routerboard-wap-2nd) ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" ;; mikrotik,routerboard-lhg-5nd) diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index cc4121f93e..797d1bba1f 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -19,6 +19,7 @@ ath79_setup_interfaces() mikrotik,routerboard-lhg-5nd|\ mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ + mikrotik,routerboard-wap-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd|\ mikrotik,routerboard-wapr-2nd) ucidef_set_interface_lan "eth0" @@ -43,6 +44,7 @@ ath79_setup_macs() mikrotik,routerboard-lhg-5nd|\ mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ + mikrotik,routerboard-wap-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd|\ mikrotik,routerboard-wapr-2nd) label_mac="$mac_base" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 8b1b5f04dd..3bfcfcc461 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -27,6 +27,7 @@ case "$FIRMWARE" in mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-lhg-5nd|\ mikrotik,routerboard-sxt-5nd-r2|\ + mikrotik,routerboard-wap-2nd|\ mikrotik,routerboard-wapr-2nd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1) ;; |