bcm53xx: backport DTS commits that setup USB LEDs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

6 files changed, 428 insertions, 2 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
new file mode 100644
index 0000000000..9857dec9bd
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
@@ -0,0 +1,74 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 27 Jun 2017 19:35:27 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for each controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Northstar has 3 controllers: OHCI and EHCI (each with 2 ports) and XHCI
+(with just 1 port). Describe them in the DT. In future this will allow
+to reference them as trigger sources.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -272,6 +272,19 @@
+ 				reg = <0x00021000 0x1000>;
+ 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ 				phys = <&usb2_phy>;
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				ehci_port1: port@1 {
++					reg = <1>;
++					#trigger-source-cells = <0>;
++				};
++
++				ehci_port2: port@2 {
++					reg = <2>;
++					#trigger-source-cells = <0>;
++				};
+ 			};
+ 
+ 			ohci: ohci@22000 {
+@@ -280,6 +293,19 @@
+ 				compatible = "generic-ohci";
+ 				reg = <0x00022000 0x1000>;
+ 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				ohci_port1: port@1 {
++					reg = <1>;
++					#trigger-source-cells = <0>;
++				};
++
++				ohci_port2: port@2 {
++					reg = <2>;
++					#trigger-source-cells = <0>;
++				};
+ 			};
+ 		};
+ 
+@@ -300,6 +326,14 @@
+ 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ 				phys = <&usb3_phy>;
+ 				phy-names = "usb";
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				xhci_port1: port@1 {
++					reg = <1>;
++					#trigger-source-cells = <0>;
++				};
+ 			};
+ 		};
+ 
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
new file mode 100644
index 0000000000..c2195b1726
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
@@ -0,0 +1,139 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 2 Aug 2017 06:40:41 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few
+ devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
+leds: document new trigger-sources property") to specify USB ports. Such an
+information can be used by operating system to setup LEDs behavior.
+
+I updated dts files for 7 devices I own and I was able to test.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 4 ++++
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 3 +++
+ arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts      | 6 ++++++
+ arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++++
+ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts  | 5 +++++
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      | 3 +++
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts      | 3 +++
+ 7 files changed, 28 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -52,6 +52,10 @@
+ 		usb {
+ 			label = "bcm53xx:blue:usb";
+ 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>, <&ohci_port2>,
++					  <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		power0 {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -48,6 +48,9 @@
+ 		usb {
+ 			label = "bcm53xx:blue:usb";
+ 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		wireless {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -42,16 +42,22 @@
+ 		usb2 {
+ 			label = "bcm53xx:white:usb2";
+ 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port2>, <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		usb3-white {
+ 			label = "bcm53xx:white:usb3";
+ 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		usb3-green {
+ 			label = "bcm53xx:green:usb3";
+ 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		wps {
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -36,6 +36,8 @@
+ 		usb2-port1 {
+ 			label = "bcm53xx:green:usb2-port1";
+ 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		power {
+@@ -67,6 +69,8 @@
+ 		usb2-port2 {
+ 			label = "bcm53xx:green:usb2-port2";
+ 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port2>, <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 	};
+ 
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -46,11 +46,16 @@
+ 		usb3 {
+ 			label = "bcm53xx:blue:usb3";
+ 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		usb2 {
+ 			label = "bcm53xx:blue:usb2";
+ 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port2>, <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		wan-blue {
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -71,6 +71,9 @@
+ 		usb3-white {
+ 			label = "bcm53xx:white:usb3";
+ 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		2ghz {
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -59,6 +59,9 @@
+ 		usb3	{
+ 			label = "bcm53xx:green:usb3";
+ 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		status	{
diff --git a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
index 425c420da7..39034997fc 100644
--- a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
+++ b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
@@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -98,6 +98,12 @@
+@@ -102,6 +102,12 @@
  		#address-cells = <1>;
  		#size-cells = <0>;
  
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch b/target/linux/bcm53xx/patches-4.9/035-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
new file mode 100644
index 0000000000..9857dec9bd
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.9/035-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
@@ -0,0 +1,74 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 27 Jun 2017 19:35:27 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for each controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Northstar has 3 controllers: OHCI and EHCI (each with 2 ports) and XHCI
+(with just 1 port). Describe them in the DT. In future this will allow
+to reference them as trigger sources.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -272,6 +272,19 @@
+ 				reg = <0x00021000 0x1000>;
+ 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ 				phys = <&usb2_phy>;
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				ehci_port1: port@1 {
++					reg = <1>;
++					#trigger-source-cells = <0>;
++				};
++
++				ehci_port2: port@2 {
++					reg = <2>;
++					#trigger-source-cells = <0>;
++				};
+ 			};
+ 
+ 			ohci: ohci@22000 {
+@@ -280,6 +293,19 @@
+ 				compatible = "generic-ohci";
+ 				reg = <0x00022000 0x1000>;
+ 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				ohci_port1: port@1 {
++					reg = <1>;
++					#trigger-source-cells = <0>;
++				};
++
++				ohci_port2: port@2 {
++					reg = <2>;
++					#trigger-source-cells = <0>;
++				};
+ 			};
+ 		};
+ 
+@@ -300,6 +326,14 @@
+ 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ 				phys = <&usb3_phy>;
+ 				phy-names = "usb";
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				xhci_port1: port@1 {
++					reg = <1>;
++					#trigger-source-cells = <0>;
++				};
+ 			};
+ 		};
+ 
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch b/target/linux/bcm53xx/patches-4.9/035-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
new file mode 100644
index 0000000000..c2195b1726
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.9/035-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
@@ -0,0 +1,139 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 2 Aug 2017 06:40:41 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few
+ devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
+leds: document new trigger-sources property") to specify USB ports. Such an
+information can be used by operating system to setup LEDs behavior.
+
+I updated dts files for 7 devices I own and I was able to test.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 4 ++++
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 3 +++
+ arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts      | 6 ++++++
+ arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++++
+ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts  | 5 +++++
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      | 3 +++
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts      | 3 +++
+ 7 files changed, 28 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -52,6 +52,10 @@
+ 		usb {
+ 			label = "bcm53xx:blue:usb";
+ 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>, <&ohci_port2>,
++					  <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		power0 {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -48,6 +48,9 @@
+ 		usb {
+ 			label = "bcm53xx:blue:usb";
+ 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		wireless {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -42,16 +42,22 @@
+ 		usb2 {
+ 			label = "bcm53xx:white:usb2";
+ 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port2>, <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		usb3-white {
+ 			label = "bcm53xx:white:usb3";
+ 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		usb3-green {
+ 			label = "bcm53xx:green:usb3";
+ 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		wps {
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -36,6 +36,8 @@
+ 		usb2-port1 {
+ 			label = "bcm53xx:green:usb2-port1";
+ 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		power {
+@@ -67,6 +69,8 @@
+ 		usb2-port2 {
+ 			label = "bcm53xx:green:usb2-port2";
+ 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port2>, <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 	};
+ 
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -46,11 +46,16 @@
+ 		usb3 {
+ 			label = "bcm53xx:blue:usb3";
+ 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		usb2 {
+ 			label = "bcm53xx:blue:usb2";
+ 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port2>, <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		wan-blue {
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -71,6 +71,9 @@
+ 		usb3-white {
+ 			label = "bcm53xx:white:usb3";
+ 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		2ghz {
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -59,6 +59,9 @@
+ 		usb3	{
+ 			label = "bcm53xx:green:usb3";
+ 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++					  <&xhci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		status	{
diff --git a/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
index 425c420da7..39034997fc 100644
--- a/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
+++ b/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
@@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -98,6 +98,12 @@
+@@ -102,6 +102,12 @@
  		#address-cells = <1>;
  		#size-cells = <0>;