aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRussell Senior <russell@personaltelco.net>2020-03-19 04:27:28 -0700
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-03-21 19:22:21 +0100
commitd5812478ad4c882256e43a2ad52ddf0c0944db7b (patch)
tree7e565e79a5645aaee7471358e9cf5af514dd697a
parent349ad62341dfa61280206c352c75e78e7f441efe (diff)
downloadupstream-d5812478ad4c882256e43a2ad52ddf0c0944db7b.tar.gz
upstream-d5812478ad4c882256e43a2ad52ddf0c0944db7b.tar.bz2
upstream-d5812478ad4c882256e43a2ad52ddf0c0944db7b.zip
ath79: add support for ubnt_bullet-m-ar7240 variant
This adds support for the Ubiquiti Bullet M (AR7240). Specifications: - AR7240 SoC @ 400 MHz - 32 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - External antenna - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via WebUI: Upload the factory image via the stock firmware web UI. Attention: airOS firmware versions >= 5.6 have a new bootloader with an incompatible partition table! Please downgrade to <= 5.5 _before_ flashing OpenWrt! Refer to the device's Wiki page for further information. Flashing via TFTP: Same procedure as other Ubiquiti M boards. - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device or on the PoE supply pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_bullet-m-ar7240-squashfs-factory.bin The "fixed-link" section of the device tree is needed to avoid errors like this: Generic PHY mdio.0:1f:04: Master/Slave resolution failed, maybe conflicting manual settings? With "fixed-link", the errors go away and eth0 comes up reliably. Signed-off-by: Russell Senior <russell@personaltelco.net> [fix SUPPORTED_DEVICES] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-rw-r--r--target/linux/ath79/dts/ar7240_ubnt_bullet-m-ar7240.dts22
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom1
-rw-r--r--target/linux/ath79/image/generic-ubnt.mk10
5 files changed, 36 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar7240_ubnt_bullet-m-ar7240.dts b/target/linux/ath79/dts/ar7240_ubnt_bullet-m-ar7240.dts
new file mode 100644
index 0000000000..58b35f5c8b
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_ubnt_bullet-m-ar7240.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7240.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,bullet-m-ar7240", "ubnt,xm", "qca,ar7240";
+ model = "Ubiquiti Bullet M XM (AR7240)";
+};
+
+&eth0 {
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&eth1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 227ccf0dfe..2df7dca89d 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -250,6 +250,7 @@ tplink,tl-wr842n-v2)
trendnet,tew-823dru)
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0"
;;
+ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
ubnt,bullet-m-xw|\
ubnt,nanostation-loco-m|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index dbb722482b..fc1fee4844 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -40,6 +40,7 @@ ath79_setup_interfaces()
tplink,re450-v1|\
tplink,re450-v2|\
tplink,tl-wr902ac-v1|\
+ ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
ubnt,bullet-m-xw|\
ubnt,lap-120|\
@@ -446,6 +447,7 @@ ath79_setup_macs()
label_mac=$wan_mac
;;
ubnt,airrouter|\
+ ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
ubnt,nanostation-loco-m|\
ubnt,nanostation-m|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 38f158896b..0cf8b43514 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -85,6 +85,7 @@ case "$FIRMWARE" in
tplink,tl-wr2543-v1|\
tplink,tl-wr842n-v1|\
ubnt,airrouter|\
+ ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
ubnt,nanostation-loco-m|\
ubnt,nanostation-m|\
diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk
index 4902023089..95853b6c46 100644
--- a/target/linux/ath79/image/generic-ubnt.mk
+++ b/target/linux/ath79/image/generic-ubnt.mk
@@ -113,6 +113,16 @@ define Device/ubnt_airrouter
endef
TARGET_DEVICES += ubnt_airrouter
+define Device/ubnt_bullet-m-ar7240
+ $(Device/ubnt-xm)
+ SOC := ar7240
+ DEVICE_MODEL := Bullet-M
+ DEVICE_VARIANT := XM (AR7240)
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_bullet-m-ar7240
+
define Device/ubnt_bullet-m-ar7241
$(Device/ubnt-xm)
SOC := ar7241