aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2014-01-10 09:07:12 +0000
committerGabor Juhos <juhosg@openwrt.org>2014-01-10 09:07:12 +0000
commit32aef686f7c8450b193ede200452a647471b9099 (patch)
treee35eaca96e151e20bc48401c3b970bcf88b92314
parent01727717f7aa8edad737d3e0b53dfb88d81f87e1 (diff)
downloadupstream-32aef686f7c8450b193ede200452a647471b9099.tar.gz
upstream-32aef686f7c8450b193ede200452a647471b9099.tar.bz2
upstream-32aef686f7c8450b193ede200452a647471b9099.zip
ar71xx: Fix WD My Net N600 weak signal issue
The LNAs need to be enabled by setting their respective GPIO to high even though the original firmware's setting sets them to low on initialization. Obviously the LNAs are then later initialized by the driver on the OEM firmware. Without this fix the device is mostly "deaf". Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Tested-by: Steven Haigh <netwiz@crc.id.au> Patchwork: http://patchwork.openwrt.org/patch/4689/ [juhosg: - remove the GPIO LED changes, the My Net N600 has no yellow LEDs at all, - change subject and update the commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39214
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c15
1 files changed, 15 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c
index 476cff8d2e..9e785ca163 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c
@@ -42,6 +42,9 @@
#define MYNET_N600_GPIO_BTN_RESET 16
#define MYNET_N600_GPIO_BTN_WPS 17
+#define MYNET_N600_GPIO_EXTERNAL_LNA0 14
+#define MYNET_N600_GPIO_EXTERNAL_LNA1 15
+
#define MYNET_N600_KEYS_POLL_INTERVAL 20 /* msecs */
#define MYNET_N600_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N600_KEYS_POLL_INTERVAL)
@@ -152,6 +155,18 @@ static void __init mynet_n600_setup(void)
ARRAY_SIZE(mynet_n600_gpio_keys),
mynet_n600_gpio_keys);
+ /*
+ * Control signal for external LNAs 0 and 1
+ * Taken from GPL bootloader source:
+ * board/ar7240/db12x/alpha_gpio.c
+ */
+ gpio_request_one(MYNET_N600_GPIO_EXTERNAL_LNA0,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "External LNA0");
+ gpio_request_one(MYNET_N600_GPIO_EXTERNAL_LNA1,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "External LNA1");
+
mynet_n600_get_mac("wlan24mac=", tmpmac);
ath79_register_wmac(art + MYNET_N600_WMAC_CALDATA_OFFSET, tmpmac);