aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2018-04-19 09:20:58 +0200
committerDaniel Golle <daniel@makrotopia.org>2020-04-08 14:05:51 +0100
commitc948a4782ba9e99f690a75ddf95ad76add95b5fa (patch)
tree2821d94a508dce5b2145b493da7ae97eae051286
parent5a5a9b7a7500379e79410a8a955381ec0fa486ae (diff)
downloadupstream-c948a4782ba9e99f690a75ddf95ad76add95b5fa.tar.gz
upstream-c948a4782ba9e99f690a75ddf95ad76add95b5fa.tar.bz2
upstream-c948a4782ba9e99f690a75ddf95ad76add95b5fa.zip
ramips: add support for D-Link DWR-960
The DWR-960 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610 mpcie card) - 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN) - 1x 10/100/1000 Mbps Ethernet (1 LAN) (AR8035) - 2x internal, non-detachable antennas (Wifi 2.4G) - 3x external, detachable antennas (2x LTE, 1x Wifi 5G) - 1x LTE modem - UART (J4) header on PCB (57600 8n1) - 9x LED, 2x button - JBOOT bootloader Known issues: - Flash is extremely slow. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-rw-r--r--target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts190
-rw-r--r--target/linux/ramips/image/mt7620.mk14
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/02_network5
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches3
-rw-r--r--target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
6 files changed, 216 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts b/target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts
new file mode 100644
index 0000000000..063d65a70d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "dlink,dwr-960", "ralink,mt7620a-soc";
+ model = "D-Link DWR-960";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "dwr-960:green:status";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "dwr-960:green:wan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "dwr-960:green:lan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ sms {
+ label = "dwr-960:green:sms";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ signal_green {
+ label = "dwr-960:green:signal";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal_red {
+ label = "dwr-960:red:signal";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ 4g {
+ label = "dwr-960:green:4g";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "dwr-960:green:3g";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "dwr-960:green:wlan5g";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan2g {
+ label = "dwr-960:green:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "wllll";
+
+ port@5 {
+ status = "okay";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&phy7>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ phy-mode = "rgmii-id";
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mediatek,mtd-eeprom = <&config 0xe08e>;
+ mtd-mac-address = <&config 0xe50e>;
+ mtd-mac-address-increment = <2>;
+ };
+};
+
+&state_default {
+ default {
+ ralink,group = "i2c", "wled", "spi refclk", "uartf", "ephy";
+ ralink,function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 552879e02f..d5365ac70e 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -279,6 +279,20 @@ define Device/dlink_dwr-922-e2
endef
TARGET_DEVICES += dlink_dwr-922-e2
+define Device/dlink_dwr-960
+ $(Device/amit_jboot)
+ SOC := mt7620a
+ IMAGE_SIZE := 16256k
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DWR-960
+ DLINK_ROM_ID := DLK6E2429001
+ DLINK_FAMILY_MEMBER := 0x6E24
+ DLINK_FIRMWARE_SIZE := 0xFE0000
+ DEVICE_PACKAGES += kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
+ kmod-mt76x0e
+endef
+TARGET_DEVICES += dlink_dwr-960
+
define Device/dovado_tiny-ac
SOC := mt7620a
IMAGE_SIZE := 7872k
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
index fe6dfac50e..e4fd875019 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -87,6 +87,9 @@ dlink,dwr-922-e2)
ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
;;
+dlink,dwr-960)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x2e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
dovado,tiny-ac)
set_wifi_led "$boardname:orange:wifi"
;;
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 76e1d56bd3..d870b5c11c 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -100,6 +100,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
;;
+ dlink,dwr-960)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0"
+ ;;
edimax,br-6478ac-v2|\
tplink,archer-c2-v1)
ucidef_add_switch "switch1" \
@@ -273,6 +277,7 @@ ramips_setup_macs()
dlink,dwr-118-a2|\
dlink,dwr-921-c1|\
dlink,dwr-922-e2|\
+ dlink,dwr-960|\
lava,lr-25g001)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
lan_mac=$(macaddr_add "$wan_mac" 1)
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches
index 85380d84a8..f2355fdb97 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches
@@ -11,6 +11,9 @@ dlink,dir-510l)
ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
;;
+dlink,dwr-960)
+ ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "0" "1"
+ ;;
head-weblink,hdrm200)
ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
ucidef_add_gpio_switch "io1" "I/O 1" "1"
diff --git a/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index f33ed82f62..291f89f41d 100644
--- a/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -28,6 +28,7 @@ case "$FIRMWARE" in
dlink,dwr-118-a2|\
dlink,dwr-921-c1|\
dlink,dwr-922-e2|\
+ dlink,dwr-960|\
lava,lr-25g001)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
wifi_mac=$(macaddr_add "$wan_mac" 1)