apm821xx: add linux 4.14 apm821xx patches

This patch updates the apm821xx target to use the 4.14 kernel.

4.14 finally ships with a driver for the WNDR4700's tc654 fan
controller. The custom driver is deprecated in favor of the
upstream driver and the thermal cooling definitions in the DTS
are updated.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

14 files changed, 1458 insertions, 3 deletions

diff --git a/target/linux/apm821xx/config-4.14 b/target/linux/apm821xx/config-4.14
new file mode 100644
index 0000000000..feaba21eb4
--- /dev/null
+++ b/target/linux/apm821xx/config-4.14
@@ -0,0 +1,372 @@
+# CONFIG_40x is not set
+CONFIG_44x=y
+CONFIG_460EX=y
+CONFIG_4xx=y
+CONFIG_4xx_SOC=y
+# CONFIG_ADVANCED_OPTIONS is not set
+CONFIG_APM821xx=y
+CONFIG_APOLLO3G=y
+# CONFIG_ARCHES is not set
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS=11
+CONFIG_ARCH_MMAP_RND_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+# CONFIG_ARCH_RANDOM is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
+CONFIG_AUDIT_ARCH=y
+# CONFIG_BAMBOO is not set
+CONFIG_BCH=y
+CONFIG_BLK_MQ_PCI=y
+# CONFIG_BLUESTONE is not set
+CONFIG_BOOKE=y
+CONFIG_BOOKE_WDT=y
+# CONFIG_BOUNCE is not set
+CONFIG_BUCKMINSTER=y
+# CONFIG_CANYONLANDS is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEV_PPC4XX=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD5_PPC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA1_PPC=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DECOMPRESS_GZIP=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_DMA_NOOP_OPS is not set
+# CONFIG_DMA_VIRT_OPS is not set
+# CONFIG_DRM_LIB_RANDOM is not set
+CONFIG_DTC=y
+# CONFIG_E200 is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EBONY is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+# CONFIG_EIGER is not set
+# CONFIG_EPAPR_BOOT is not set
+CONFIG_EXPORTFS=y
+CONFIG_EXTRA_TARGETS="uImage"
+CONFIG_FIXED_PHY=y
+# CONFIG_FORCE_SMP is not set
+CONFIG_FREEZER=y
+# CONFIG_FSL_LBC is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_FUTEX_PI=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+# CONFIG_GENERIC_CSUM is not set
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_GENERIC_TIME_VSYSCALL=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_GE_FPGA is not set
+# CONFIG_GLACIER is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAS_RAPIDIO is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_GUP=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_PPC4XX=y
+CONFIG_HZ=1000
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IBM_IIC=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_EMAC4=y
+CONFIG_IBM_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_EMAC_RGMII=y
+CONFIG_IBM_EMAC_RXB=128
+CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_EMAC_TAH=y
+CONFIG_IBM_EMAC_TXB=128
+# CONFIG_ICON is not set
+CONFIG_IKAREM=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_IPIC is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISA_DMA_API=y
+# CONFIG_JFFS2_FS is not set
+# CONFIG_KATMAI is not set
+CONFIG_KERNEL_GZIP=y
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LIBFDT=y
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_U3_HT_IRQS is not set
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_SPLIT is not set
+# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NONSTATIC_KERNEL is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_IRQS=512
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND=y
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_BUS_ADDR_T_64BIT=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_MSI_IRQ_DOMAIN is not set
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYS_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PM=y
+CONFIG_PM_AUTOSLEEP=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_PPC44x_SIMPLE=y
+CONFIG_PPC4xx_CPM=y
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPC4xx_HSTA_MSI is not set
+CONFIG_PPC4xx_MSI=y
+CONFIG_PPC4xx_OCM=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+# CONFIG_PPC64 is not set
+# CONFIG_PPC_47x is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_PPC_970_NAP is not set
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_REGS=y
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_COPRO_BASE is not set
+CONFIG_PPC_DCR=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DOORBELL is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+# CONFIG_PPC_EPAPR_HV_PIC is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_ICP_HV is not set
+# CONFIG_PPC_ICP_NATIVE is not set
+# CONFIG_PPC_ICS_RTAS is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_PPC_MMU_NOHASH=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MSI_BITMAP=y
+# CONFIG_PPC_P7_NAP is not set
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PPC_PTDUMP is not set
+# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_UDBG_16550=y
+CONFIG_PPC_WERROR=y
+# CONFIG_PPC_XICS is not set
+# CONFIG_PPC_XIVE is not set
+# CONFIG_PPC_XIVE_SPAPR is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+CONFIG_PTE_64BIT=y
+# CONFIG_RAINIER is not set
+CONFIG_RAS=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RD_GZIP=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SAM440EP is not set
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SEQUOIA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SIMPLE_GPIO=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SWIOTLB is not set
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_TAISHAN is not set
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_THIN_ARCHIVES=y
+CONFIG_THREAD_SHIFT=13
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VDSO32=y
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
+# CONFIG_WARP is not set
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WNDR4700=y
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_POWERPC=y
+# CONFIG_YOSEMITE is not set
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/apm821xx/dts/netgear-wndr4700.dts b/target/linux/apm821xx/dts/netgear-wndr4700.dts
index 2e0addf74b..96cf97c45c 100644
--- a/target/linux/apm821xx/dts/netgear-wndr4700.dts
+++ b/target/linux/apm821xx/dts/netgear-wndr4700.dts
@@ -99,17 +99,17 @@
 
 				map1 {
 					trip = <&cpu_alert1>;
-					cooling-device = <&fan0 1 87>;
+					cooling-device = <&fan0 1 76>;
 				};
 
 				map2 {
 					trip = <&cpu_alert2>;
-					cooling-device = <&fan0 88 100>;
+					cooling-device = <&fan0 77 101>;
 				};
 
 				map3 {
 					trip = <&cpu_alert3>;
-					cooling-device = <&fan0 101 147>;
+					cooling-device = <&fan0 102 147>;
 				};
 
 				map4 {
diff --git a/target/linux/apm821xx/nand/config-default b/target/linux/apm821xx/nand/config-default
index d6bdbd74e2..783305a850 100644
--- a/target/linux/apm821xx/nand/config-default
+++ b/target/linux/apm821xx/nand/config-default
@@ -9,6 +9,7 @@ CONFIG_IKAREM=y
 CONFIG_ATA=y
 CONFIG_ATA_SFF=y
 CONFIG_ATA_BMDMA=y
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
 CONFIG_SATA_PMP=y
 CONFIG_GENERIC_PHY=y
 CONFIG_SATA_DWC=y
@@ -22,6 +23,7 @@ CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_M48T86=y
 CONFIG_THERMAL=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_OF=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_HWMON=y
@@ -36,6 +38,7 @@ CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_UBIFS_FS=y
 # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_USB_PCI=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_TC654=y
 CONFIG_SWCONFIG=y
diff --git a/target/linux/apm821xx/patches-4.14/200-add-meraki-mr24-ikarem-support.patch b/target/linux/apm821xx/patches-4.14/200-add-meraki-mr24-ikarem-support.patch
new file mode 100644
index 0000000000..e9f6c5cfc5
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/200-add-meraki-mr24-ikarem-support.patch
@@ -0,0 +1,32 @@
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -41,6 +41,19 @@ config EBONY
+ 	help
+ 	  This option enables support for the IBM PPC440GP evaluation board.
+ 
++config IKAREM
++	bool "Ikarem"
++	depends on 44x
++	default n
++	select PPC44x_SIMPLE
++	select APM821xx
++	select PCI_MSI
++	select PPC4xx_MSI
++	select PPC4xx_PCI_EXPRESS
++	select IBM_EMAC_RGMII
++	help
++	  This option enables support for the Cisco Meraki MR24 (Ikarem) Access Point.
++
+ config SAM440EP
+         bool "Sam440ep"
+ 	depends on 44x
+--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
+@@ -62,6 +62,7 @@ static char *board[] __initdata = {
+ 	"amcc,sequoia",
+ 	"amcc,taishan",
+ 	"amcc,yosemite",
++	"meraki,ikarem",
+ 	"mosaixtech,icon"
+ };
+ 
diff --git a/target/linux/apm821xx/patches-4.14/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-4.14/201-add-amcc-apollo3g-support.patch
new file mode 100644
index 0000000000..18982392d4
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/201-add-amcc-apollo3g-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -144,6 +144,17 @@ config CANYONLANDS
+ 	help
+ 	  This option enables support for the AMCC PPC460EX evaluation board.
+ 
++config APOLLO3G
++	bool "Apollo3G"
++	depends on 44x
++	default n
++	select PPC44x_SIMPLE
++	select APM821xx
++	select IBM_EMAC_RGMII
++	select 460EX
++	help
++	  This option enables support for the AMCC Apollo 3G board.
++
+ config GLACIER
+ 	bool "Glacier"
+ 	depends on 44x
+--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
+@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
+  * board.c file for it rather than adding it to this list.
+  */
+ static char *board[] __initdata = {
++	"amcc,apollo3g",
+ 	"amcc,arches",
+ 	"amcc,bamboo",
+ 	"apm,bluestone",
diff --git a/target/linux/apm821xx/patches-4.14/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-4.14/202-add-netgear-wndr4700-support.patch
new file mode 100644
index 0000000000..77294a8cbd
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/202-add-netgear-wndr4700-support.patch
@@ -0,0 +1,32 @@
+--- a/arch/powerpc/platforms/44x/Makefile
++++ b/arch/powerpc/platforms/44x/Makefile
+@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
+ obj-y	+= idle.o
+ endif
+ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
++obj-$(CONFIG_WNDR4700) += wndr4700.o
+ obj-$(CONFIG_EBONY)	+= ebony.o
+ obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
+ obj-$(CONFIG_WARP)	+= warp.o
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -273,6 +273,19 @@ config ICON
+ 	help
+ 	  This option enables support for the AMCC PPC440SPe evaluation board.
+ 
++config WNDR4700
++	bool "WNDR4700"
++	depends on 44x
++	default n
++	select APM821xx
++	select PCI_MSI
++	select PPC4xx_MSI
++	select PPC4xx_PCI_EXPRESS
++	select IBM_EMAC_RGMII
++	select 460EX
++	help
++	  This option enables support for the Netgear WNDR4700/WNDR4720 board.
++
+ config XILINX_VIRTEX440_GENERIC_BOARD
+ 	bool "Generic Xilinx Virtex 5 FXT board support"
+ 	depends on 44x
diff --git a/target/linux/apm821xx/patches-4.14/203-add-meraki-mx60-buckminster-support.patch b/target/linux/apm821xx/patches-4.14/203-add-meraki-mx60-buckminster-support.patch
new file mode 100644
index 0000000000..c3931c9809
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/203-add-meraki-mx60-buckminster-support.patch
@@ -0,0 +1,32 @@
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -31,6 +31,19 @@ config BLUESTONE
+ 	help
+ 	  This option enables support for the APM APM821xx Evaluation board.
+ 
++config BUCKMINSTER
++	bool "Buckminster"
++	depends on 44x
++	default n
++	select APM821xx
++	select PCI_MSI
++	select PPC4xx_MSI
++	select PPC4xx_PCI_EXPRESS
++	select IBM_EMAC_RGMII
++	select 460EX
++	help
++	  This option enables support for the Cisco Meraki MX60/MX60W (Buckminster) Security Appliance
++
+ config EBONY
+ 	bool "Ebony"
+ 	depends on 44x
+--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
+@@ -63,6 +63,7 @@ static char *board[] __initdata = {
+ 	"amcc,sequoia",
+ 	"amcc,taishan",
+ 	"amcc,yosemite",
++	"meraki,buckminster",
+ 	"meraki,ikarem",
+ 	"mosaixtech,icon"
+ };
diff --git a/target/linux/apm821xx/patches-4.14/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-4.14/300-fix-atheros-nics-on-apm82181.patch
new file mode 100644
index 0000000000..110726d258
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/300-fix-atheros-nics-on-apm82181.patch
@@ -0,0 +1,51 @@
+--- a/arch/powerpc/platforms/4xx/pci.c
++++ b/arch/powerpc/platforms/4xx/pci.c
+@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
+ 	u32 val;
+ 
+ 	/*
+-	 * Do a software reset on PCIe ports.
+-	 * This code is to fix the issue that pci drivers doesn't re-assign
+-	 * bus number for PCIE devices after Uboot
+-	 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+-	 * PT quad port, SAS LSI 1064E)
++	 * Only reset the PHY when no link is currently established.
++	 * This is for the Atheros PCIe board which has problems to establish
++	 * the link (again) after this PHY reset. All other currently tested
++	 * PCIe boards don't show this problem.
+ 	 */
+-
+-	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
+-	mdelay(10);
++	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
++	if (!(val & 0x00001000)) {
++		/*
++		 * Do a software reset on PCIe ports.
++		 * This code is to fix the issue that pci drivers doesn't re-assign
++		 * bus number for PCIE devices after Uboot
++		 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
++		 * PT quad port, SAS LSI 1064E)
++		 */
++
++		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
++		mdelay(10);
++	}
+ 
+ 	if (port->endpoint)
+ 		val = PTYPE_LEGACY_ENDPOINT << 20;
+@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
+ 	mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+ 	mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+ 
+-	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+-	mdelay(50);
+-	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
++	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
++	if (!(val & 0x00001000)) {
++		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
++		mdelay(50);
++		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
++	}
+ 
+ 	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ 		mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-4.14/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-4.14/301-fix-memory-map-wndr4700.patch
new file mode 100644
index 0000000000..6eb04b2c25
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/301-fix-memory-map-wndr4700.patch
@@ -0,0 +1,14 @@
+--- a/arch/powerpc/platforms/4xx/pci.c
++++ b/arch/powerpc/platforms/4xx/pci.c
+@@ -1905,9 +1905,9 @@ static void __init ppc4xx_configure_pcie
+ 		 * if it works
+ 		 */
+ 		out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+-		out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
++		out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
+ 		out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+-		out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
++		out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
+ 		out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ 		out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+ 
diff --git a/target/linux/apm821xx/patches-4.14/701-powerpc_ibm_apm82181_phyclk_fix.patch b/target/linux/apm821xx/patches-4.14/701-powerpc_ibm_apm82181_phyclk_fix.patch
new file mode 100644
index 0000000000..7f630a3c2a
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/701-powerpc_ibm_apm82181_phyclk_fix.patch
@@ -0,0 +1,51 @@
+--- a/drivers/net/ethernet/ibm/emac/core.c
++++ b/drivers/net/ethernet/ibm/emac/core.c
+@@ -130,6 +130,7 @@ static inline void emac_report_timeout_e
+ {
+ 	if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
+ 				  EMAC_FTR_460EX_PHY_CLK_FIX |
++				  EMAC_FTR_APM821XX_PHY_CLK_FIX |
+ 				  EMAC_FTR_440EP_PHY_CLK_FIX))
+ 		DBG(dev, "%s" NL, error);
+ 	else if (net_ratelimit())
+@@ -146,6 +147,10 @@ static inline void emac_rx_clk_tx(struct
+ 	if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
+ 		dcri_clrset(SDR0, SDR0_MFR,
+ 			    0, SDR0_MFR_ECS >> dev->cell_index);
++
++	if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
++                dcri_clrset(SDR0, SDR0_ETH_CFG,
++                        0, 0x00000100 >> dev->cell_index);
+ #endif
+ }
+ 
+@@ -155,6 +160,10 @@ static inline void emac_rx_clk_default(s
+ 	if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
+ 		dcri_clrset(SDR0, SDR0_MFR,
+ 			    SDR0_MFR_ECS >> dev->cell_index, 0);
++
++	if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
++		dcri_clrset(SDR0, SDR0_ETH_CFG,
++			    0x00000100 >> dev->cell_index, 0);
+ #endif
+ }
+ 
+@@ -2879,6 +2888,7 @@ static int emac_init_config(struct emac_
+ 		if (of_device_is_compatible(np, "ibm,emac-apm821xx")) {
+ 			dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
+ 					  EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
++					  EMAC_FTR_APM821XX_PHY_CLK_FIX |
+ 					  EMAC_FTR_460EX_PHY_CLK_FIX);
+ 		}
+ 	} else if (of_device_is_compatible(np, "ibm,emac4")) {
+--- a/drivers/net/ethernet/ibm/emac/core.h
++++ b/drivers/net/ethernet/ibm/emac/core.h
+@@ -335,6 +335,8 @@ struct emac_instance {
+  */
+ #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
+ 
++#define EMAC_FTR_APM821XX_PHY_CLK_FIX	0x000002000
++
+ /* Right now, we don't quite handle the always/possible masks on the
+  * most optimal way as we don't have a way to say something like
+  * always EMAC4. Patches welcome.
diff --git a/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
new file mode 100644
index 0000000000..144a06970f
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
@@ -0,0 +1,545 @@
+From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Thu, 2 Jun 2016 00:48:46 +0200
+Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
+ w/o ROM
+
+This patch adds a firmware loader for the uPD720201K8-711-BAC-A
+and uPD720202K8-711-BAA-A variant. Both of these chips are listed
+in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
+devices which need the firmware loader on page 2 in order to
+work as they "do not support the External ROM".
+
+The "Firmware Download Sequence" is describe in chapter
+"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
+
+The firmware "K2013080.mem" is available from a USB3.0 Host to
+PCIe Adapter (PP2U-E card) "Firmware download" archive. An
+alternative version can be sourced from Netgear's WNDR4700 GPL
+archives.
+
+The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
+(2012-06-15) state that the firmware is for the following devices:
+ - uPD720201 ES 2.0 sample whose revision ID is 2.
+ - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
+ - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+
+If someone from Renesas is listening: It would be great, if these
+firmwares could be added to linux-firmware.git.
+
+Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
+---
+ drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 492 insertions(+)
+
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -24,6 +24,8 @@
+ #include <linux/slab.h>
+ #include <linux/module.h>
+ #include <linux/acpi.h>
++#include <linux/firmware.h>
++#include <asm/unaligned.h>
+ 
+ #include "xhci.h"
+ #include "xhci-trace.h"
+@@ -238,6 +240,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+ #endif /* CONFIG_ACPI */
+ 
++static const struct renesas_fw_entry {
++	const char *firmware_name;
++	u16 device;
++	u8 revision;
++	u16 expected_version;
++} renesas_fw_table[] = {
++	/*
++	 * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
++	 * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
++	 * need the software loader.
++	 *
++	 * PP2U/ReleaseNote_USB3-201-202-FW.txt:
++	 *
++	 * Note: This firmware is for the following devices.
++	 *  - uPD720201 ES 2.0 sample whose revision ID is 2.
++	 *  - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
++	 *  - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
++	 */
++	{ "K2013080.mem", 0x0014, 0x02, 0x2013 },
++	{ "K2013080.mem", 0x0014, 0x03, 0x2013 },
++	{ "K2013080.mem", 0x0015, 0x02, 0x2013 },
++};
++
++static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
++{
++	const struct renesas_fw_entry *entry;
++	size_t i;
++
++	/* This loader will only work with a RENESAS device. */
++	if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
++		return NULL;
++
++	for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
++		entry = &renesas_fw_table[i];
++		if (entry->device == dev->device &&
++		    entry->revision == dev->revision)
++			return entry;
++	}
++
++	return NULL;
++}
++
++static int renesas_fw_download_image(struct pci_dev *dev,
++				     const u32 *fw,
++				     size_t step)
++{
++	size_t i;
++	int err;
++	u8 fw_status;
++	bool data0_or_data1;
++
++	/*
++	 * The hardware does alternate between two 32-bit pages.
++	 * (This is because each row of the firmware is 8 bytes).
++	 *
++	 * for even steps we use DATA0, for odd steps DATA1.
++	 */
++	data0_or_data1 = (step & 1) == 1;
++
++	/* step+1. Read "Set DATAX" and confirm it is cleared. */
++	for (i = 0; i < 10000; i++) {
++		err = pci_read_config_byte(dev, 0xF5, &fw_status);
++		if (err)
++			return pcibios_err_to_errno(err);
++		if (!(fw_status & BIT(data0_or_data1)))
++			break;
++
++		udelay(1);
++	}
++	if (i == 10000)
++		return -ETIMEDOUT;
++
++	/*
++	 * step+2. Write FW data to "DATAX".
++	 * "LSB is left" => force little endian
++	 */
++	err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
++				     (__force u32) cpu_to_le32(fw[step]));
++	if (err)
++		return pcibios_err_to_errno(err);
++
++	udelay(100);
++
++	/* step+3. Set "Set DATAX". */
++	err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
++	if (err)
++		return pcibios_err_to_errno(err);
++
++	return 0;
++}
++
++static int renesas_fw_verify(struct pci_dev *dev,
++			     const void *fw_data,
++			     size_t length)
++{
++	const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
++	u16 fw_version_pointer;
++	u16 fw_version;
++
++	if (!entry)
++		return -EINVAL;
++
++	/*
++	 * The Firmware's Data Format is describe in
++	 * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
++	 */
++
++	/* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
++	if (length % 8 != 0) {
++		dev_err(&dev->dev, "firmware size is not a multipe of 8.");
++		return -EINVAL;
++	}
++
++	/*
++	 * The bootrom chips of the big brother have sizes up to 64k, let's
++	 * assume that's the biggest the firmware can get.
++	 */
++	if (length < 0x1000 || length >= 0x10000) {
++		dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
++			length);
++		return -EINVAL;
++	}
++
++	/* The First 2 bytes are fixed value (55aa). "LSB on Left" */
++	if (get_unaligned_le16(fw_data) != 0x55aa) {
++		dev_err(&dev->dev, "no valid firmware header found.");
++		return -EINVAL;
++	}
++
++	/* verify the firmware version position and print it. */
++	fw_version_pointer = get_unaligned_le16(fw_data + 4);
++	if (fw_version_pointer + 2 >= length) {
++		dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
++		return -EINVAL;
++	}
++
++	fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
++	dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
++
++	if (fw_version != entry->expected_version) {
++		dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
++			 entry->expected_version);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int renesas_fw_check_running(struct pci_dev *pdev)
++{
++	int err;
++	u8 fw_state;
++
++	/*
++	 * Test if the device is actually needing the firmware. As most
++	 * BIOSes will initialize the device for us. If the device is
++	 * initialized.
++	 */
++	err = pci_read_config_byte(pdev, 0xF4, &fw_state);
++	if (err)
++		return pcibios_err_to_errno(err);
++
++	/*
++	 * Check if "FW Download Lock" is locked. If it is and the FW is
++	 * ready we can simply continue. If the FW is not ready, we have
++	 * to give up.
++	 */
++	if (fw_state & BIT(1)) {
++		dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
++
++		if (fw_state & BIT(4))
++			return 0;
++
++		dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
++		return -EIO;
++	}
++
++	/*
++	 * Check if "FW Download Enable" is set. If someone (us?) tampered
++	 * with it and it can't be resetted, we have to give up too... and
++	 * ask for a forgiveness and a reboot.
++	 */
++	if (fw_state & BIT(0)) {
++		dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
++		return -EIO;
++	}
++
++	/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
++	switch ((fw_state & 0x70)) {
++	case 0: /* No result yet */
++		dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
++
++		/* tell the caller, that this device needs the firmware. */
++		return 1;
++
++	case BIT(4): /* Success, device should be working. */
++		dev_dbg(&pdev->dev, "FW is ready.");
++		return 0;
++
++	case BIT(5): /* Error State */
++		dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
++		return -ENODEV;
++
++	default: /* All other states are marked as "Reserved states" */
++		dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
++			(fw_state & 0x70) >> 4);
++		return -EINVAL;
++	}
++}
++
++static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
++{
++#if 0
++	u32 val;
++
++	/*
++	 * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
++	 * 'RUN/STOP' of USBCMD Register is set"
++	 */
++	val = readl(hcd->regs + 0x20);
++	if (val & BIT(0)) {
++		dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
++		return -EBUSY;
++	}
++#endif
++	return 0;
++}
++
++static int renesas_fw_download(struct pci_dev *pdev,
++	const struct firmware *fw, unsigned int retry_counter)
++{
++	const u32 *fw_data = (const u32 *) fw->data;
++	size_t i;
++	int err;
++	u8 fw_status;
++
++	/*
++	 * For more information and the big picture: please look at the
++	 * "Firmware Download Sequence" in "7.1 FW Download Interface"
++	 * of R19UH0078EJ0500 Rev.5.00 page 131
++	 */
++	err = renesas_hw_check_run_stop_busy(pdev);
++	if (err)
++		return err;
++
++	/*
++	 * 0. Set "FW Download Enable" bit in the
++	 * "FW Download Control & Status Register" at 0xF4
++	 */
++	err = pci_write_config_byte(pdev, 0xF4, BIT(0));
++	if (err)
++		return pcibios_err_to_errno(err);
++
++	/* 1 - 10 follow one step after the other. */
++	for (i = 0; i < fw->size / 4; i++) {
++		err = renesas_fw_download_image(pdev, fw_data, i);
++		if (err) {
++			dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
++				 i, i * 4, err);
++			return err;
++		}
++	}
++
++	/*
++	 * This sequence continues until the last data is written to
++	 * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
++	 * is cleared by the hardware beforehand.
++	 */
++	for (i = 0; i < 10000; i++) {
++		err = pci_read_config_byte(pdev, 0xF5, &fw_status);
++		if (err)
++			return pcibios_err_to_errno(err);
++		if (!(fw_status & (BIT(0) | BIT(1))))
++			break;
++
++		udelay(1);
++	}
++	if (i == 10000)
++		dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
++
++	/*
++	 * 11. After finishing writing the last data of FW, the
++	 * System Software must clear "FW Download Enable"
++	 */
++	err = pci_write_config_byte(pdev, 0xF4, 0);
++	if (err)
++		return pcibios_err_to_errno(err);
++
++	/* 12. Read "Result Code" and confirm it is good. */
++	for (i = 0; i < 10000; i++) {
++		err = pci_read_config_byte(pdev, 0xF4, &fw_status);
++		if (err)
++			return pcibios_err_to_errno(err);
++		if (fw_status & BIT(4))
++			break;
++
++		udelay(1);
++	}
++	if (i == 10000) {
++		/* Timed out / Error - let's see if we can fix this */
++		err = renesas_fw_check_running(pdev);
++		switch (err) {
++		case 0: /*
++			 * we shouldn't end up here.
++			 * maybe it took a little bit longer.
++			 * But all should be well?
++			 */
++			break;
++
++		case 1: /* (No result yet? - we can try to retry) */
++			if (retry_counter < 10) {
++				retry_counter++;
++				dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
++					  retry_counter);
++				return renesas_fw_download(pdev, fw,
++							   retry_counter);
++			}
++			return -ETIMEDOUT;
++
++		default:
++			return err;
++		}
++	}
++	/*
++	 * Optional last step: Engage Firmware Lock
++	 *
++	 * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
++	 * if (err)
++	 *	return pcibios_err_to_errno(err);
++	 */
++
++	return 0;
++}
++
++struct renesas_fw_ctx {
++	struct pci_dev *pdev;
++	const struct pci_device_id *id;
++	bool resume;
++};
++
++static int xhci_pci_probe(struct pci_dev *pdev,
++			  const struct pci_device_id *id);
++
++static void renesas_fw_callback(const struct firmware *fw,
++				void *context)
++{
++	struct renesas_fw_ctx *ctx = context;
++	struct pci_dev *pdev = ctx->pdev;
++	struct device *parent = pdev->dev.parent;
++	int err = -ENOENT;
++
++	if (fw) {
++		err = renesas_fw_verify(pdev, fw->data, fw->size);
++		if (!err) {
++			err = renesas_fw_download(pdev, fw, 0);
++			release_firmware(fw);
++			if (!err) {
++				if (ctx->resume)
++					return;
++
++				err = xhci_pci_probe(pdev, ctx->id);
++				if (!err) {
++					/* everything worked */
++					devm_kfree(&pdev->dev, ctx);
++					return;
++				}
++
++				/* in case of an error - fall through */
++			} else {
++				dev_err(&pdev->dev, "firmware failed to download (%d).",
++					err);
++			}
++		}
++	} else {
++		dev_err(&pdev->dev, "firmware failed to load (%d).", err);
++	}
++
++	dev_info(&pdev->dev, "Unloading driver");
++
++	if (parent)
++		device_lock(parent);
++
++	device_release_driver(&pdev->dev);
++
++	if (parent)
++		device_unlock(parent);
++
++	pci_dev_put(pdev);
++}
++
++static int renesas_fw_alive_check(struct pci_dev *pdev)
++{
++	const struct renesas_fw_entry *entry;
++	int err;
++
++	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++	entry = renesas_needs_fw_dl(pdev);
++	if (!entry)
++		return 0;
++
++	err = renesas_fw_check_running(pdev);
++	/* Also go ahead, if the firmware is running */
++	if (err == 0)
++		return 0;
++
++	/* At this point, we can be sure that the FW isn't ready. */
++	return err;
++}
++
++static int renesas_fw_download_to_hw(struct pci_dev *pdev,
++				     const struct pci_device_id *id,
++				     bool do_resume)
++{
++	const struct renesas_fw_entry *entry;
++	struct renesas_fw_ctx *ctx;
++	int err;
++
++	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++	entry = renesas_needs_fw_dl(pdev);
++	if (!entry)
++		return 0;
++
++	err = renesas_fw_check_running(pdev);
++	/* Continue ahead, if the firmware is already running. */
++	if (err == 0)
++		return 0;
++
++	if (err != 1)
++		return err;
++
++	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
++	if (!ctx)
++		return -ENOMEM;
++	ctx->pdev = pdev;
++	ctx->resume = do_resume;
++	ctx->id = id;
++
++	pci_dev_get(pdev);
++	err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
++		&pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
++	if (err) {
++		pci_dev_put(pdev);
++		return err;
++	}
++
++	/*
++	 * The renesas_fw_callback() callback will continue the probe
++	 * process, once it aquires the firmware.
++	 */
++	return 1;
++}
++
+ /* called during probe() after chip reset completes */
+ static int xhci_pci_setup(struct usb_hcd *hcd)
+ {
+@@ -273,6 +727,22 @@ static int xhci_pci_probe(struct pci_dev
+ 	struct hc_driver *driver;
+ 	struct usb_hcd *hcd;
+ 
++	/*
++	 * Check if this device is a RENESAS uPD720201/2 device.
++	 * Otherwise, we can continue with xhci_pci_probe as usual.
++	 */
++	retval = renesas_fw_download_to_hw(dev, id, false);
++	switch (retval) {
++	case 0:
++		break;
++
++	case 1: /* let it load the firmware and recontinue the probe. */
++		return 0;
++
++	default:
++		return retval;
++	};
++
+ 	driver = (struct hc_driver *)id->driver_data;
+ 
+ 	/* For some HW implementation, a XHCI reset is just not enough... */
+@@ -337,6 +807,16 @@ static void xhci_pci_remove(struct pci_d
+ {
+ 	struct xhci_hcd *xhci;
+ 
++	if (renesas_fw_alive_check(dev)) {
++		/*
++		 * bail out early, if this was a renesas device w/o FW.
++		 * Else we might hit the NMI watchdog in xhci_handsake
++		 * during xhci_reset as part of the driver's unloading.
++		 * which we forced in the renesas_fw_callback().
++		 */
++		return;
++	}
++
+ 	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ 	xhci->xhc_state |= XHCI_STATE_REMOVING;
+ 	if (xhci->shared_hcd) {
diff --git a/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch
new file mode 100644
index 0000000000..ec97f16e27
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch
@@ -0,0 +1,54 @@
+From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 23 Jun 2016 20:28:20 +0200
+Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
+ uPD720202
+
+The APM82181 does not support MSI-X. When probed, it will
+produce a noisy warning.
+
+---
+ drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 362 insertions(+)
+
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -196,7 +196,7 @@ static void xhci_pci_quirks(struct devic
+ 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+ 			pdev->device == 0x0015)
+-		xhci->quirks |= XHCI_RESET_ON_RESUME;
++		xhci->quirks |= XHCI_RESET_ON_RESUME | XHCI_FORCE_MSI;
+ 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ 		xhci->quirks |= XHCI_RESET_ON_RESUME;
+ 
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -357,10 +357,14 @@ static int xhci_try_enable_msi(struct us
+ 		free_irq(hcd->irq, hcd);
+ 	hcd->irq = 0;
+ 
+-	ret = xhci_setup_msix(xhci);
+-	if (ret)
+-		/* fall back to msi*/
++	if (xhci->quirks & XHCI_FORCE_MSI) {
+ 		ret = xhci_setup_msi(xhci);
++	} else {
++		ret = xhci_setup_msix(xhci);
++		if (ret)
++			/* fall back to msi*/
++			ret = xhci_setup_msi(xhci);
++	}
+ 
+ 	if (!ret) {
+ 		hcd->msi_enabled = 1;
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1848,6 +1848,7 @@ struct xhci_hcd {
+ 	/* support xHCI 0.96 spec USB2 software LPM */
+ 	unsigned		sw_lpm_support:1;
+ 	/* support xHCI 1.0 spec USB2 hardware LPM */
++#define XHCI_FORCE_MSI		(1 << 24)
+ 	unsigned		hw_lpm_support:1;
+ 	/* cached usb2 extened protocol capabilites */
+ 	u32                     *ext_caps;
diff --git a/target/linux/apm821xx/patches-4.14/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-4.14/803-hwmon-tc654-add-detection-routine.patch
new file mode 100644
index 0000000000..f8b30ae1b3
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/803-hwmon-tc654-add-detection-routine.patch
@@ -0,0 +1,65 @@
+From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 17 Dec 2017 17:27:15 +0100
+Subject: [PATCH 1/2] hwmon: tc654 add detection routine
+
+This patch adds a detection routine for the TC654/TC655
+chips.  Both IDs are listed in the Datasheet.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
+ 1 file changed, 29 insertions(+)
+
+--- a/drivers/hwmon/tc654.c
++++ b/drivers/hwmon/tc654.c
+@@ -64,6 +64,11 @@ enum tc654_regs {
+ /* Register data is read (and cached) at most once per second. */
+ #define TC654_UPDATE_INTERVAL		HZ
+ 
++/* Manufacturer and Version Identification Register Values */
++#define TC654_MFR_ID_MICROCHIP		0x84
++#define TC654_VER_ID			0x00
++#define TC655_VER_ID			0x01
++
+ struct tc654_data {
+ 	struct i2c_client *client;
+ 
+@@ -497,6 +502,29 @@ static const struct i2c_device_id tc654_
+ 	{}
+ };
+ 
++static int
++tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
++{
++	struct i2c_adapter *adapter = new_client->adapter;
++	int manufacturer, product;
++
++	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
++		return -ENODEV;
++
++	manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
++	if (manufacturer != TC654_MFR_ID_MICROCHIP)
++		return -ENODEV;
++
++	product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
++	if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
++		return -ENODEV;
++
++	strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
++		I2C_NAME_SIZE);
++	return 0;
++}
++
++
+ MODULE_DEVICE_TABLE(i2c, tc654_id);
+ 
+ static struct i2c_driver tc654_driver = {
+@@ -505,6 +533,7 @@ static struct i2c_driver tc654_driver =
+ 		   },
+ 	.probe = tc654_probe,
+ 	.id_table = tc654_id,
++	.detect = tc654_detect,
+ };
+ 
+ module_i2c_driver(tc654_driver);
diff --git a/target/linux/apm821xx/patches-4.14/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-4.14/804-hwmon-tc654-add-thermal_cooling-device.patch
new file mode 100644
index 0000000000..18ed8aecce
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.14/804-hwmon-tc654-add-thermal_cooling-device.patch
@@ -0,0 +1,174 @@
+From 15ae701189744d321d3a1264ff46f8871e8765ee Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 17 Dec 2017 17:29:13 +0100
+Subject: [PATCH] hwmon: tc654: add thermal_cooling device
+
+This patch adds a thermaL_cooling device to the tc654 driver.
+This allows the chip to be used for DT-based cooling.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++++++++---------
+ 1 file changed, 86 insertions(+), 17 deletions(-)
+
+--- a/drivers/hwmon/tc654.c
++++ b/drivers/hwmon/tc654.c
+@@ -24,6 +24,7 @@
+ #include <linux/module.h>
+ #include <linux/mutex.h>
+ #include <linux/slab.h>
++#include <linux/thermal.h>
+ #include <linux/util_macros.h>
+ 
+ enum tc654_regs {
+@@ -141,6 +142,9 @@ struct tc654_data {
+ 			 * writable register used to control the duty
+ 			 * cycle of the V OUT output.
+ 			 */
++
++	/* optional cooling device */
++	struct thermal_cooling_device *cdev;
+ };
+ 
+ /* helper to grab and cache data, at most one time per second */
+@@ -376,36 +380,30 @@ static ssize_t set_pwm_mode(struct devic
+ static const int tc654_pwm_map[16] = { 77,  88, 102, 112, 124, 136, 148, 160,
+ 				      172, 184, 196, 207, 219, 231, 243, 255};
+ 
++static int get_pwm(struct tc654_data *data)
++{
++	if (data->config & TC654_REG_CONFIG_SDM)
++		return 0;
++	else
++		return tc654_pwm_map[data->duty_cycle];
++}
++
+ static ssize_t show_pwm(struct device *dev, struct device_attribute *da,
+ 			char *buf)
+ {
+ 	struct tc654_data *data = tc654_update_client(dev);
+-	int pwm;
+ 
+ 	if (IS_ERR(data))
+ 		return PTR_ERR(data);
+ 
+-	if (data->config & TC654_REG_CONFIG_SDM)
+-		pwm = 0;
+-	else
+-		pwm = tc654_pwm_map[data->duty_cycle];
+-
+-	return sprintf(buf, "%d\n", pwm);
++	return sprintf(buf, "%d\n", get_pwm(data));
+ }
+ 
+-static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
+-		       const char *buf, size_t count)
++static int _set_pwm(struct tc654_data *data, unsigned long val)
+ {
+-	struct tc654_data *data = dev_get_drvdata(dev);
+ 	struct i2c_client *client = data->client;
+-	unsigned long val;
+ 	int ret;
+ 
+-	if (kstrtoul(buf, 10, &val))
+-		return -EINVAL;
+-	if (val > 255)
+-		return -EINVAL;
+-
+ 	mutex_lock(&data->update_lock);
+ 
+ 	if (val == 0)
+@@ -425,6 +423,22 @@ static ssize_t set_pwm(struct device *de
+ 
+ out:
+ 	mutex_unlock(&data->update_lock);
++	return ret;
++}
++
++static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
++		       const char *buf, size_t count)
++{
++	struct tc654_data *data = dev_get_drvdata(dev);
++	unsigned long val;
++	int ret;
++
++	if (kstrtoul(buf, 10, &val))
++		return -EINVAL;
++	if (val > 255)
++		return -EINVAL;
++
++	ret = _set_pwm(data, val);
+ 	return ret < 0 ? ret : count;
+ }
+ 
+@@ -462,6 +476,47 @@ static struct attribute *tc654_attrs[] =
+ 
+ ATTRIBUTE_GROUPS(tc654);
+ 
++/* cooling device */
++
++static int tc654_get_max_state(struct thermal_cooling_device *cdev,
++			       unsigned long *state)
++{
++	*state = 255;
++	return 0;
++}
++
++static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
++                              unsigned long *state)
++{
++	struct tc654_data *data = tc654_update_client(cdev->devdata);
++
++	if (IS_ERR(data))
++		return PTR_ERR(data);
++
++	*state = get_pwm(data);
++	return 0;
++}
++
++static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
++			       unsigned long state)
++{
++	struct tc654_data *data = tc654_update_client(cdev->devdata);
++
++	if (IS_ERR(data))
++		return PTR_ERR(data);
++
++	if (state > 255)
++		return -EINVAL;
++
++	return _set_pwm(data, state);
++}
++
++static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
++	.get_max_state = tc654_get_max_state,
++	.get_cur_state = tc654_get_cur_state,
++	.set_cur_state = tc654_set_cur_state,
++};
++
+ /*
+  * device probe and removal
+  */
+@@ -493,7 +548,21 @@ static int tc654_probe(struct i2c_client
+ 	hwmon_dev =
+ 	    devm_hwmon_device_register_with_groups(dev, client->name, data,
+ 						   tc654_groups);
+-	return PTR_ERR_OR_ZERO(hwmon_dev);
++	if (IS_ERR(hwmon_dev))
++		return PTR_ERR(hwmon_dev);
++
++#if IS_ENABLED(CONFIG_OF)
++	/* Optional cooling device register for Device tree platforms */
++	data->cdev = thermal_of_cooling_device_register(client->dev.of_node,
++							"tc654", hwmon_dev,
++							&tc654_fan_cool_ops);
++#else /* CONFIG_OF */
++	/* Optional cooling device register for non Device tree platforms */
++	data->cdev = thermal_cooling_device_register("tc654", hwmon_dev,
++						     &tc654_fan_cool_ops);
++#endif /* CONFIG_OF */
++
++	return PTR_ERR_OR_ZERO(data->cdev);
+ }
+ 
+ static const struct i2c_device_id tc654_id[] = {