diff options
| author | Gabor Juhos <juhosg@openwrt.org> | 2013-11-15 08:21:59 +0000 |
|---|---|---|
| committer | Gabor Juhos <juhosg@openwrt.org> | 2013-11-15 08:21:59 +0000 |
| commit | 67eded254aa30dd8067d8ac0301c165ed9d722f3 (patch) | |
| tree | 6239cef7bd90df9efe9106d970d19526d6f608d3 | |
| parent | f58bfd1df4e4a9b84a0e94691986c38bab6d8730 (diff) | |
| download | upstream-67eded254aa30dd8067d8ac0301c165ed9d722f3.tar.gz upstream-67eded254aa30dd8067d8ac0301c165ed9d722f3.tar.bz2 upstream-67eded254aa30dd8067d8ac0301c165ed9d722f3.zip | |
ar71xx: wndr4300: set official mac addresses
Get the factory assigned mac addresses stored in the caldata
partition and asign them to lan and wan interfaces. Also put
the correct mac addresses into the WiFi eeprom files to ensure
that the ath9k driver will use the correct ones.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Patchwork: http://patchwork.openwrt.org/patch/4350/
[juhosg:
- move WiFi MAC address setup to the firmware hotplug file,
- use the official MAC address for the 2.4GHz as well,
- remove uci-defaults.sh modifications,
- update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38812
| -rw-r--r-- | target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 13 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/uci-defaults/02_network | 4 |
2 files changed, 15 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 0fd6813832..fa4b98c1c1 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -11,8 +11,6 @@ ath9k_eeprom_extract() { local count=$3 local mtd - . /lib/functions.sh - mtd=$(find_mtd_chardev $part) [ -n "$mtd" ] || \ ath9k_eeprom_die "no mtd device found for partition $part" @@ -21,9 +19,18 @@ ath9k_eeprom_extract() { ath9k_eeprom_die "failed to extract from $mtd" } +ath9k_patch_firmware_mac() { + local mac=$1 + + [ -z "$mac" ] && return + + macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6 +} + [ -e /lib/firmware/$FIRMWARE ] && exit 0 . /lib/ar71xx.sh +. /lib/functions.sh board=$(ar71xx_board_name) @@ -32,6 +39,7 @@ case "$FIRMWARE" in case $board in wndr4300) ath9k_eeprom_extract "caldata" 4096 2048 + ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0) ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -43,6 +51,7 @@ case "$FIRMWARE" in case $board in wndr4300) ath9k_eeprom_extract "caldata" 20480 2048 + ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 12) ;; *) ath9k_eeprom_die "board $board is not supported yet" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 0819cb2426..49db21bdc1 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -211,6 +211,10 @@ wndr4300) ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4" ucidef_add_switch_vlan "switch0" "2" "0t 5" + mac_lan=$(mtd_get_mac_binary caldata 0) + [ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan" + mac_wan=$(mtd_get_mac_binary caldata 6) + [ -n "$mac_wan" ] && ucidef_set_interface_macaddr "wan" "$mac_wan" ;; all0305 |\ |