Revert "ar71xx: Add support for Teltonika RUT900"

This reverts commit 224e5f5efa22b8a0132522367afd3b22f05d53e1.

pepe2k pointed out that this was not ready to merge

Signed-off-by: John Crispin <john@phrozen.org>

11 files changed, 1 insertions, 525 deletions

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0d0ebdcd6f..9cad8995db 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -423,9 +423,6 @@ get_status_led() {
 	tl-wdr6500-v2)
 		status_led="tp-link:white:system"
 		;;
-	tlt-rut900)
-		status_led="tlt:green:status"
-		;;
 	tube2h)
 		status_led="alfa:green:signal4"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8ee17f43c8..a751c64a3a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1154,9 +1154,6 @@ ar71xx_board_detect() {
 	*"TL-WR941ND")
 		name="tl-wr941nd"
 		;;
-	*"TLT-RUT900")
-		name="tlt-rut900"
-		;;
 	*"Tube2H")
 		name="tube2h"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 1bc993450d..e246f35add 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -443,8 +443,7 @@ platform_check_image() {
 	tl-wr941nd-v5|\
 	tl-wr941nd-v6|\
 	tl-wr940n-v4|\
-	tl-wr941nd|\
-	tlt-rut900)
+	tl-wr941nd)
 		local magic_ver="0100"
 
 		case "$board" in
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index b508248041..0a375862ba 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -207,7 +207,6 @@ CONFIG_ATH79_MACH_TL_WR841N_V9=y
 CONFIG_ATH79_MACH_TL_WR941ND=y
 CONFIG_ATH79_MACH_TL_WR941ND_V6=y
 CONFIG_ATH79_MACH_TL_WR940N_V4=y
-CONFIG_ATH79_MACH_TLT_RUT900=y
 CONFIG_ATH79_MACH_TUBE2H=y
 CONFIG_ATH79_MACH_UBNT=y
 CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
@@ -390,7 +389,6 @@ CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_MTD_SPLIT_WRGG_FW=y
 CONFIG_MTD_SPLIT_MINOR_FW=y
 CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_MTD_TLT_PARTS=y
 CONFIG_MYLOADER=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 35dc916fca..9030954c27 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -2021,14 +2021,3 @@ config ATH79_MACH_TL_WPA8630
 	select ATH79_DEV_LEDS_GPIO
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
-
-config ATH79_MACH_TLT_RUT900
-	bool "Teltonika RUT900 board support"
-	select SOC_AR934X
-	select ATH79_DEV_AP9X_PCI if PCI
-	select ATH79_DEV_ETH
-	select ATH79_DEV_GPIO_BUTTONS
-	select ATH79_DEV_LEDS_GPIO
-	select ATH79_DEV_M25P80
-	select ATH79_DEV_USB
-	select ATH79_DEV_WMAC
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index e92aa6f4d8..2868adcaef 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -212,7 +212,6 @@ obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9)		+= mach-tl-wr841n-v9.o
 obj-$(CONFIG_ATH79_MACH_TL_WR941ND)		+= mach-tl-wr941nd.o
 obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6)		+= mach-tl-wr941nd-v6.o
 obj-$(CONFIG_ATH79_MACH_TL_WR940N_V4)		+= mach-tl-wr940n-v4.o
-obj-$(CONFIG_ATH79_MACH_TLT_RUT900)		+= mach-tlt-rut900.o
 obj-$(CONFIG_ATH79_MACH_TUBE2H)			+= mach-tube2h.o
 obj-$(CONFIG_ATH79_MACH_UBNT)			+= mach-ubnt.o
 obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC)		+= mach-ubnt-unifiac.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c
deleted file mode 100644
index 0f53692a69..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- *  TELTONIKA TLT-RUT900 board support
- *
- *  Copyright (C) 2014 Teltonika
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-
-/* I2C interface */
-#define rut900_GPIO_SDA			17
-#define rut900_GPIO_SCK			16
-
-#define RUT900_GPIO_LED_BAR0		48
-#define RUT900_GPIO_LED_BAR1		49
-#define RUT900_GPIO_LED_BAR2		50
-#define RUT900_GPIO_LED_BAR3		51
-#define RUT900_GPIO_LED_BAR4		52
-#define RUT900_GPIO_LED_ST_GRE		54
-#define RUT900_GPIO_LED_ST_RED		53
-//#define RUT900_GPIO_LED_WAN		18
-#define RUT900_GPIO_LED_LAN1		14
-#define RUT900_GPIO_LED_LAN2		13
-#define RUT900_GPIO_LED_LAN3		22
-#define RUT900_GPIO_LED_WAN		1
-
-#define RUT900_GPIO_EXTERNAL_LNA0	2
-//#define RUT900_GPIO_EXTERNAL_LNA1	3
-
-#define RUT900_GPIO_BTN_RESET		15
-#define RUT900_GPIO_BTN_EXPANDER	4
-#define RUT900_GPIO_BTN_TEST		58
-#define RUT900_GPIO_MMC_CS		3
-
-//#define RUT900_GPIO_EXPANDER_POWER	11
-
-#define RUT900_KEYS_POLL_INTERVAL	20	/* msecs */
-#define RUT900_KEYS_DEBOUNCE_INTERVAL	(3 * RUT900_KEYS_POLL_INTERVAL)
-#define RUT900_KEYS_DEBOUNCE_INTERVAL_DIN 20
-
-#define RUT900_MAC0_OFFSET		0
-#define RUT900_MAC1_OFFSET		6
-#define RUT900_WMAC_CALDATA_OFFSET	0x1000
-#define RUT900_PCIE_CALDATA_OFFSET	0x5000
-
-static struct i2c_gpio_platform_data rut900_i2c_device_platdata = {
-	.sda_pin	= rut900_GPIO_SDA,
-	.scl_pin	= rut900_GPIO_SCK,
-	.udelay		= 10,
-};
-
-static struct platform_device rut900_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev		= {
-		.platform_data	= &rut900_i2c_device_platdata,
-	},
-};
-
-static struct i2c_board_info rut900_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pca9539", 0x74), 
-	},
-	{
-		I2C_BOARD_INFO("mcp3221", 0x4D), 
-	},
-};
-
-static void rut900_i2c_init(void)
-{
-	/* The gpio interface */
-	platform_device_register(&rut900_i2c_device);
-	/* I2C devices */
-	i2c_register_board_info(0, rut900_i2c_devs, ARRAY_SIZE(rut900_i2c_devs));
-}
-
-//Flash partitions are calcutated in drivers/mtd/tltpart.c
-static const char *rut900_part_probes[] = {
-	"tlt",
-	NULL,
-};
-
-static struct flash_platform_data rut900_flash_data = {
-	.part_probes	= rut900_part_probes,
-};
-
-static struct gpio_led rut900_leds_gpio[] __initdata = {
-	{
-		.name		= "tlt:green:signal_bar0",
-		.gpio		= RUT900_GPIO_LED_BAR0,
-		.active_low	= 0,
-	},
-	{
-		.name		= "tlt:green:signal_bar1",
-		.gpio		= RUT900_GPIO_LED_BAR1,
-		.active_low	= 0,
-	},
-	{
-		.name		= "tlt:green:signal_bar2",
-		.gpio		= RUT900_GPIO_LED_BAR2,
-		.active_low	= 0,
-	},
-	{
-		.name		= "tlt:green:signal_bar3",
-		.gpio		= RUT900_GPIO_LED_BAR3,
-		.active_low	= 0,
-	},
-	{
-		.name		= "tlt:green:signal_bar4",
-		.gpio		= RUT900_GPIO_LED_BAR4,
-		.active_low	= 0,
-	},
-	{
-		.name		= "tlt:green:status",
-		.gpio		= RUT900_GPIO_LED_ST_GRE,
-		.active_low	= 0,
-	},
-	{
-		.name		= "tlt:red:status",
-		.gpio		= RUT900_GPIO_LED_ST_RED,
-		.active_low	= 0,
-	},
-
-};
-
-static struct gpio_keys_button rut900_gpio_keys[] __initdata = {
-	{
-		.desc		= "Reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = RUT900_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= RUT900_GPIO_BTN_RESET,
-		.active_low	= 1,
-	},
-	{
-		.desc		= "Expander interrupt",
-		.type		= EV_KEY,
-		.code		= KEY_RFKILL,
-		.debounce_interval = RUT900_KEYS_DEBOUNCE_INTERVAL_DIN,
-		.gpio		= RUT900_GPIO_BTN_EXPANDER,
-	},
-};
-
-static struct spi_board_info ath79_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data	= &rut900_flash_data,
-	},
-	{
-		.bus_num	= 0,
-		.chip_select	= 1,
-		.max_speed_hz	= 25000000,
-		.modalias	= "mmc_spi",
-	}
-};
-
-static struct ath79_spi_platform_data ath79_spi_data = {
-	.bus_num 	= 0,
-	.num_chipselect	= 2,
-};
-
-static void __init rut900_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f020000);
-	u8 *art = (u8 *) KSEG1ADDR(0x1f030000);
-	u8 tmpmac[ETH_ALEN];
-
-	ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(rut900_leds_gpio),
-				 rut900_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, RUT900_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(rut900_gpio_keys),
-					rut900_gpio_keys);
-					
-	ath79_wmac_set_ext_lna_gpio(0, RUT900_GPIO_EXTERNAL_LNA0);
-
-	ath79_init_mac(tmpmac, mac, 2);
-	ath79_register_wmac(art + RUT900_WMAC_CALDATA_OFFSET, tmpmac);
-
-
-	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
-	ath79_register_mdio(1, 0x0);
-
-	/* LAN */
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
-	/* GMAC1 is connected to the internal switch */
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
-	ath79_register_eth(1);
-
-	/* WAN */
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
-	/* GMAC0 is connected to the PHY4 of the internal switch */
-	ath79_switch_data.phy4_mii_en = 1;
-	ath79_switch_data.phy_poll_mask = BIT(4);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = BIT(4);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
-	ath79_register_eth(0);
-
-	ath79_register_usb();
-
-	ath79_gpio_output_select(RUT900_GPIO_LED_LAN1,
-				 AR934X_GPIO_OUT_LED_LINK3);
-	ath79_gpio_output_select(RUT900_GPIO_LED_LAN2,
-				 AR934X_GPIO_OUT_LED_LINK2);
-	ath79_gpio_output_select(RUT900_GPIO_LED_LAN3,
-				 AR934X_GPIO_OUT_LED_LINK1);
-	ath79_gpio_output_select(RUT900_GPIO_LED_WAN,
-				 AR934X_GPIO_OUT_LED_LINK4);
-	
-	//SPI CS1
-	ath79_gpio_output_select(RUT900_GPIO_MMC_CS,
-				 7);
-	
-	//HS UART
-	ath79_gpio_output_select(18, 79);
-	
-	/* Init I2C interface */
-	rut900_i2c_init();
-}
-
-MIPS_MACHINE(ATH79_MACH_TLT_RUT900, "TLT-RUT900",
-		"TELTONIKA TLT-RUT900",
-		rut900_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 8aaa0a5c24..18033acd12 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -259,7 +259,6 @@ enum ath79_mach_type {
 	ATH79_MACH_TL_WR941ND_V5,		/* TP-LINK TL-WR941ND v5 */
 	ATH79_MACH_TL_WR941ND_V6,		/* TP-LINK TL-WR941ND v6 */
 	ATH79_MACH_TL_WR940N_V4,		/* TP-LINK TL-WR940N v4 */
-	ATH79_MACH_TLT_RUT900,			/* Teltonika RUT900 */
 	ATH79_MACH_TUBE2H,			/* Alfa Network Tube2H */
 	ATH79_MACH_UBNT_AIRGW,			/* Ubiquiti AirGateway */
 	ATH79_MACH_UBNT_AIRGWP,			/* Ubiquiti AirGateway Pro */
diff --git a/target/linux/ar71xx/files/drivers/mtd/tltpart.c b/target/linux/ar71xx/files/drivers/mtd/tltpart.c
deleted file mode 100644
index 92f558d778..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/tltpart.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/magic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define TLT_NUM_PARTS	7
-#define TLT_HEADER_V1	0x01000000
-#define MD5SUM_LEN		16
-
-#define TLT_UBOOT_LEN	0x20000
-#define TLT_CONFIG_LEN	0x10000
-#define TLT_ART_LEN		0x10000
-#define EVENTLOG_LEN		0x90000
-
-struct tlt_fw_header {
-	uint32_t	version;	/* header version */
-	char		vendor_name[24];
-	char		fw_version[36];
-	uint32_t	hw_id;		/* hardware id */
-	uint32_t	hw_rev;		/* hardware revision */
-	uint32_t	unk1;
-	uint8_t		md5sum1[MD5SUM_LEN];
-	uint32_t	unk2;
-	uint8_t		md5sum2[MD5SUM_LEN];
-	uint32_t	unk3;
-	uint32_t	kernel_la;	/* kernel load address */
-	uint32_t	kernel_ep;	/* kernel entry point */
-	uint32_t	fw_length;	/* total length of the firmware */
-	uint32_t	kernel_ofs;	/* kernel data offset */
-	uint32_t	kernel_len;	/* kernel data length */
-	uint32_t	rootfs_ofs;	/* rootfs data offset */
-	uint32_t	rootfs_len;	/* rootfs data length */
-	uint32_t	boot_ofs;	/* bootloader data offset */
-	uint32_t	boot_len;	/* bootloader data length */
-	uint8_t		pad[360];
-} __attribute__ ((packed));
-
-static struct tlt_fw_header *
-tlt_read_header(struct mtd_info *mtd, size_t offset)
-{
-	struct tlt_fw_header *header;
-	size_t header_len;
-	size_t retlen;
-	int ret;
-	u32 t;
-
-	header = vmalloc(sizeof(*header));
-	if (!header)
-		goto err;
-
-	header_len = sizeof(struct tlt_fw_header);
-	ret = mtd_read(mtd, offset, header_len, &retlen,
-		       (unsigned char *) header);
-	if (ret)
-		goto err_free_header;
-
-	if (retlen != header_len)
-		goto err_free_header;
-
-	/* sanity checks */
-	t = be32_to_cpu(header->version);
-	if (t != TLT_HEADER_V1)
-		goto err_free_header;
-
-	t = be32_to_cpu(header->kernel_ofs);
-	if (t != header_len)
-		goto err_free_header;
-
-	return header;
-
-err_free_header:
-	vfree(header);
-err:
-	return NULL;
-}
-
-static int tlt_check_rootfs_magic(struct mtd_info *mtd, size_t offset)
-{
-	u32 magic;
-	size_t retlen;
-	int ret;
-
-	ret = mtd_read(mtd, offset, sizeof(magic), &retlen,
-		       (unsigned char *) &magic);
-	if (ret)
-		return ret;
-
-	if (retlen != sizeof(magic))
-		return -EIO;
-
-	if (le32_to_cpu(magic) != SQUASHFS_MAGIC &&
-	    magic != 0x19852003)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int tlt_parse_partitions(struct mtd_info *master,
-				   struct mtd_partition **pparts,
-				   struct mtd_part_parser_data *data)
-{
-	struct mtd_partition *parts;
-	struct tlt_fw_header *header;
-	int nr_parts;
-	size_t kernel_offset;
-	size_t rootfs_offset;
-	size_t squashfs_offset;
-	int ret;
-
-	nr_parts = TLT_NUM_PARTS;
-	parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL);
-	if (!parts) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	kernel_offset = TLT_UBOOT_LEN + TLT_CONFIG_LEN + TLT_ART_LEN;
-
-	header = tlt_read_header(master, kernel_offset);
-	if (!header) {
-		pr_notice("%s: no TP-Link header found\n", master->name);
-		ret = -ENODEV;
-		goto err_free_parts;
-	}
-
-	squashfs_offset = kernel_offset + sizeof(struct tlt_fw_header) +
-			  be32_to_cpu(header->kernel_len);
-
-	ret = tlt_check_rootfs_magic(master, squashfs_offset);
-	if (ret == 0)
-		rootfs_offset = squashfs_offset;
-	else
-		rootfs_offset = kernel_offset + be32_to_cpu(header->rootfs_ofs);
-
-	vfree(header);
-
-	parts[0].name = "u-boot";
-	parts[0].offset = 0;
-	parts[0].size = TLT_UBOOT_LEN;
-	parts[0].mask_flags = MTD_WRITEABLE;
-	
-	parts[1].name = "config";
-	parts[1].offset = TLT_UBOOT_LEN;
-	parts[1].size = TLT_CONFIG_LEN;
-	
-	parts[2].name = "art";
-	parts[2].offset = TLT_UBOOT_LEN + TLT_CONFIG_LEN;
-	parts[2].size = TLT_ART_LEN;
-	parts[2].mask_flags = MTD_WRITEABLE;
-
-	parts[3].name = "kernel";
-	parts[3].offset = kernel_offset;
-	parts[3].size = rootfs_offset - kernel_offset;
-
-	parts[4].name = "rootfs";
-	parts[4].offset = rootfs_offset;
-	parts[4].size = master->size - rootfs_offset - EVENTLOG_LEN;
-
-	parts[5].name = "firmware";
-	parts[5].offset = kernel_offset;
-	parts[5].size = master->size - kernel_offset - EVENTLOG_LEN;
-
-	parts[6].name = "event-log";
-	parts[6].offset = master->size - EVENTLOG_LEN;
-	parts[6].size = EVENTLOG_LEN;
-
-	*pparts = parts;
-	return nr_parts;
-
-err_free_parts:
-	kfree(parts);
-err:
-	*pparts = NULL;
-	return ret;
-}
-
-static struct mtd_part_parser tlt_parser = {
-	.owner		= THIS_MODULE,
-	.parse_fn	= tlt_parse_partitions,
-	.name		= "tlt",
-};
-
-static int __init tlt_parser_init(void)
-{
-	register_mtd_parser(&tlt_parser);
-
-	return 0;
-}
-
-module_init(tlt_parser_init);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 49e87cfb99..6ddf05239d 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -1084,14 +1084,3 @@ define Device/tl-wa7210n-v2
   CONSOLE := ttyATH0,115200
 endef
 TARGET_DEVICES += tl-wa7210n-v2
-
-define Device/tlt-rut900
-  $(Device/tplink-16mlzma)
-  DEVICE_TITLE := Teltonika RUT900
-  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
-  BOARDNAME := TLT-RUT900
-  DEVICE_PROFILE := TLTRUT900
-  TPLINK_HWID := 0x35000001
-  CONSOLE := ttyS0,115200
-endef
-TARGET_DEVICES += tlt-rut900
diff --git a/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch b/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch
deleted file mode 100644
index da4e088471..0000000000
--- a/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -202,6 +202,12 @@ config MTD_TPLINK_PARTS
- 	---help---
- 	  TBD.
- 
-+config MTD_TLT_PARTS
-+	tristate "Teltonika RUT900 partitioning support"
-+	depends on ATH79
-+	---help---
-+	  Teltonika RUT900 partitioning support
-+
- comment "User Modules And Translation Layers"
- 
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-$(CONFIG_MTD_TPLINK_PARTS)	+= tplinkpart.o
- obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
-+obj-$(CONFIG_MTD_TLT_PARTS)	+= tltpart.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o