bcm4908: backport BCM4908 integrated switch initial support

Upstream driver supports bridging ports. There is no support for
crossbar setup or CPU port(s) yet.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

4 files changed, 225 insertions, 0 deletions

diff --git a/target/linux/bcm4908/config-5.4 b/target/linux/bcm4908/config-5.4
index d3d9e0f7b6..6998cdcaf0 100644
--- a/target/linux/bcm4908/config-5.4
+++ b/target/linux/bcm4908/config-5.4
@@ -35,6 +35,11 @@ CONFIG_ARM_GIC_V3=y
 CONFIG_ARM_GIC_V3_ITS=y
 CONFIG_ARM_PSCI_FW=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_B53=y
+# CONFIG_B53_MDIO_DRIVER is not set
+# CONFIG_B53_MMAP_DRIVER is not set
+# CONFIG_B53_SERDES is not set
+# CONFIG_B53_SRAB_DRIVER is not set
 CONFIG_BCM7XXX_PHY=y
 CONFIG_BCM_NET_PHYLIB=y
 CONFIG_BCM_PMB=y
@@ -92,6 +97,7 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_GENERIC=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -125,7 +131,14 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_BCM_SF2=y
+CONFIG_NET_DSA_TAG_BRCM=y
+CONFIG_NET_DSA_TAG_BRCM_COMMON=y
+CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
 CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NO_IOPORT_MAP=y
 CONFIG_NR_CPUS=4
 CONFIG_OF=y
@@ -141,6 +154,7 @@ CONFIG_PADATA=y
 CONFIG_PARTITION_PERCPU=y
 CONFIG_PGTABLE_LEVELS=3
 CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_PM=y
 CONFIG_PM_CLK=y
diff --git a/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch b/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch
new file mode 100644
index 0000000000..1786066a23
--- /dev/null
+++ b/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch
@@ -0,0 +1,50 @@
+From 3b33438c52def0de4a5577ad541e50923bcc2596 Mon Sep 17 00:00:00 2001
+From: Paul Barker <pbarker@konsulko.com>
+Date: Thu, 3 Sep 2020 12:26:20 +0100
+Subject: [PATCH] net: dsa: b53: Use dev_{err,info} instead of pr_*
+
+This change allows us to see which device the err or info messages are
+referring to if we have multiple b53 compatible devices on a board.
+
+As this removes the only pr_*() calls in this file we can drop the
+definition of pr_fmt().
+
+Signed-off-by: Paul Barker <pbarker@konsulko.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -17,8 +17,6 @@
+  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+  */
+ 
+-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+-
+ #include <linux/delay.h>
+ #include <linux/export.h>
+ #include <linux/gpio.h>
+@@ -2458,8 +2456,9 @@ int b53_switch_detect(struct b53_device
+ 			dev->chip_id = id32;
+ 			break;
+ 		default:
+-			pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
+-			       id8, id32);
++			dev_err(dev->dev,
++				"unsupported switch detected (BCM53%02x/BCM%x)\n",
++				id8, id32);
+ 			return -ENODEV;
+ 		}
+ 	}
+@@ -2489,7 +2488,8 @@ int b53_switch_register(struct b53_devic
+ 	if (ret)
+ 		return ret;
+ 
+-	pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev);
++	dev_info(dev->dev, "found switch: %s, rev %i\n",
++		 dev->name, dev->core_rev);
+ 
+ 	return dsa_register_switch(dev->ds);
+ }
diff --git a/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch b/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch
new file mode 100644
index 0000000000..ab00e58c0f
--- /dev/null
+++ b/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch
@@ -0,0 +1,30 @@
+From 434d2312cd8057aa6972f2b39aa0b359d02af9f4 Mon Sep 17 00:00:00 2001
+From: Paul Barker <pbarker@konsulko.com>
+Date: Thu, 3 Sep 2020 12:26:21 +0100
+Subject: [PATCH] net: dsa: b53: Print err message on SW_RST timeout
+
+This allows us to differentiate between the possible failure modes of
+b53_switch_reset() by looking at the dmesg output.
+
+Signed-off-by: Paul Barker <pbarker@konsulko.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -740,8 +740,11 @@ static int b53_switch_reset(struct b53_d
+ 			usleep_range(1000, 2000);
+ 		} while (timeout-- > 0);
+ 
+-		if (timeout == 0)
++		if (timeout == 0) {
++			dev_err(dev->dev,
++				"Timeout waiting for SW_RST to clear!\n");
+ 			return -ETIMEDOUT;
++		}
+ 	}
+ 
+ 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
diff --git a/target/linux/bcm4908/patches-5.4/071-v5.12-0029-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch b/target/linux/bcm4908/patches-5.4/071-v5.12-0029-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
new file mode 100644
index 0000000000..dcf1e62f77
--- /dev/null
+++ b/target/linux/bcm4908/patches-5.4/071-v5.12-0029-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
@@ -0,0 +1,131 @@
+From 73b7a6047971aa6ce4a70fc4901964d14f077171 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 6 Jan 2021 22:32:02 +0100
+Subject: [PATCH] net: dsa: bcm_sf2: support BCM4908's integrated switch
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 family SoCs come with integrated Starfighter 2 switch. Its
+registers layout it a mix of BCM7278 and BCM7445. It has 5 integrated
+PHYs and 8 ports. It also supports RGMII and SerDes.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Link: https://lore.kernel.org/r/20210106213202.17459-3-zajec5@gmail.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/dsa/b53/b53_common.c | 14 +++++++++++++
+ drivers/net/dsa/b53/b53_priv.h   |  1 +
+ drivers/net/dsa/bcm_sf2.c        | 36 +++++++++++++++++++++++++++++---
+ drivers/net/dsa/bcm_sf2_regs.h   |  1 +
+ 4 files changed, 49 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -2260,6 +2260,22 @@ static const struct b53_chip_data b53_sw
+ 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ 	},
++	/* Starfighter 2 */
++	{
++		.chip_id = BCM4908_DEVICE_ID,
++		.dev_name = "BCM4908",
++		.vlans = 4096,
++		.enabled_ports = 0x1bf,
++#if 0
++		.arl_bins = 4,
++		.arl_buckets = 256,
++#endif
++		.cpu_port = 8, /* TODO: ports 4, 5, 8 */
++		.vta_regs = B53_VTA_REGS,
++		.duplex_reg = B53_DUPLEX_STAT_GE,
++		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
++		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
++	},
+ 	{
+ 		.chip_id = BCM7445_DEVICE_ID,
+ 		.dev_name = "BCM7445",
+--- a/drivers/net/dsa/b53/b53_priv.h
++++ b/drivers/net/dsa/b53/b53_priv.h
+@@ -64,6 +64,7 @@ struct b53_io_ops {
+ #define B53_INVALID_LANE	0xff
+ 
+ enum {
++	BCM4908_DEVICE_ID = 0x4908,
+ 	BCM5325_DEVICE_ID = 0x25,
+ 	BCM5365_DEVICE_ID = 0x65,
+ 	BCM5389_DEVICE_ID = 0x89,
+--- a/drivers/net/dsa/bcm_sf2.c
++++ b/drivers/net/dsa/bcm_sf2.c
+@@ -61,7 +61,8 @@ static void bcm_sf2_imp_setup(struct dsa
+ 	b53_brcm_hdr_setup(ds, port);
+ 
+ 	if (port == 8) {
+-		if (priv->type == BCM7445_DEVICE_ID)
++		if (priv->type == BCM4908_DEVICE_ID ||
++		    priv->type == BCM7445_DEVICE_ID)
+ 			offset = CORE_STS_OVERRIDE_IMP;
+ 		else
+ 			offset = CORE_STS_OVERRIDE_IMP2;
+@@ -542,7 +543,8 @@ static void bcm_sf2_sw_mac_config(struct
+ 	if (port == core_readl(priv, CORE_IMP0_PRT_ID))
+ 		return;
+ 
+-	if (priv->type == BCM7445_DEVICE_ID)
++	if (priv->type == BCM4908_DEVICE_ID ||
++	    priv->type == BCM7445_DEVICE_ID)
+ 		offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+ 	else
+ 		offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+@@ -984,6 +986,30 @@ struct bcm_sf2_of_data {
+ 	unsigned int num_cfp_rules;
+ };
+ 
++static const u16 bcm_sf2_4908_reg_offsets[] = {
++	[REG_SWITCH_CNTRL]	= 0x00,
++	[REG_SWITCH_STATUS]	= 0x04,
++	[REG_DIR_DATA_WRITE]	= 0x08,
++	[REG_DIR_DATA_READ]	= 0x0c,
++	[REG_SWITCH_REVISION]	= 0x10,
++	[REG_PHY_REVISION]	= 0x14,
++	[REG_SPHY_CNTRL]	= 0x24,
++	[REG_CROSSBAR]		= 0xc8,
++	[REG_RGMII_0_CNTRL]	= 0xe0,
++	[REG_RGMII_1_CNTRL]	= 0xec,
++	[REG_RGMII_2_CNTRL]	= 0xf8,
++	[REG_LED_0_CNTRL]	= 0x40,
++	[REG_LED_1_CNTRL]	= 0x4c,
++	[REG_LED_2_CNTRL]	= 0x58,
++};
++
++static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
++	.type		= BCM4908_DEVICE_ID,
++	.core_reg_align	= 0,
++	.reg_offsets	= bcm_sf2_4908_reg_offsets,
++	.num_cfp_rules	= 0, /* FIXME */
++};
++
+ /* Register offsets for the SWITCH_REG_* block */
+ static const u16 bcm_sf2_7445_reg_offsets[] = {
+ 	[REG_SWITCH_CNTRL]	= 0x00,
+@@ -1032,6 +1058,9 @@ static const struct bcm_sf2_of_data bcm_
+ };
+ 
+ static const struct of_device_id bcm_sf2_of_match[] = {
++	{ .compatible = "brcm,bcm4908-switch",
++	  .data = &bcm_sf2_4908_data
++	},
+ 	{ .compatible = "brcm,bcm7445-switch-v4.0",
+ 	  .data = &bcm_sf2_7445_data
+ 	},
+--- a/drivers/net/dsa/bcm_sf2_regs.h
++++ b/drivers/net/dsa/bcm_sf2_regs.h
+@@ -17,6 +17,7 @@ enum bcm_sf2_reg_offs {
+ 	REG_SWITCH_REVISION,
+ 	REG_PHY_REVISION,
+ 	REG_SPHY_CNTRL,
++	REG_CROSSBAR,
+ 	REG_RGMII_0_CNTRL,
+ 	REG_RGMII_1_CNTRL,
+ 	REG_RGMII_2_CNTRL,