aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLech Perczak <lech.perczak@gmail.com>2020-05-29 20:50:05 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-05-31 15:44:05 +0200
commit7e513136c63108bf55b38be4d2b65aa00b0d2b26 (patch)
tree93f5cad2a831b01390601cc72ee64c106bc87729
parentf841e706403b1a111cbb6dc5930b7886307bf633 (diff)
downloadupstream-7e513136c63108bf55b38be4d2b65aa00b0d2b26.tar.gz
upstream-7e513136c63108bf55b38be4d2b65aa00b0d2b26.tar.bz2
upstream-7e513136c63108bf55b38be4d2b65aa00b0d2b26.zip
ath79: add support for TP-Link TL-WR802N V1 and V2
Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of Flash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to web interface: [V1] http://192.168.0.1 [V2] http://192.168.0.254 Default user is "admin" & password is "admin". On V2, there is no DHCP server running by default, so remember to set IP manually. - Go to "System Tools -> Firmware Upgrade" - Browse for firmware: [V1] "*.factory.bin" [V2] "*.factory-us.bin" or "*.factory-eu.bin" for eu model Web interface may complain if filename is too long. In such case, rename .bin to something shorter. - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Notes: When porting from ar71xx target to ath79, I found out that on V2, reset button is on GPIO12 and active low, instead of GPIO11 and active high. By cross-flashing V1 firmware to V2, I confirmed the same is true for V1. Also according to manual of V1, this one also has green LED instead of blue - both of those issues were fixed accordingly. The MAC address assignment has been checked with OEM firmware. Installation manual based on ar71xx support by Thomas Roberts Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [slightly adjust commit message, add MAC address comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v1.dts9
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v2.dts9
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi99
-rw-r--r--target/linux/ath79/image/tiny-tp-link.mk24
-rwxr-xr-xtarget/linux/ath79/tiny/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration18
6 files changed, 162 insertions, 1 deletions
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v1.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v1.dts
new file mode 100644
index 0000000000..229c5fa7bd
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v1.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533_tplink_tl-wr802n.dtsi"
+
+/ {
+ model = "TP-Link TL-WR802N v1";
+ compatible = "tplink,tl-wr802n-v1", "qca,qca9533";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v2.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v2.dts
new file mode 100644
index 0000000000..cbfd275d2b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v2.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533_tplink_tl-wr802n.dtsi"
+
+/ {
+ model = "TP-Link TL-WR802N v2";
+ compatible = "tplink,tl-wr802n-v2", "qca,qca9533";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi
new file mode 100644
index 0000000000..f89d020672
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ compatible = "tplink,firmware";
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&eth1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk
index a5a76edd05..6e07d290f9 100644
--- a/target/linux/ath79/image/tiny-tp-link.mk
+++ b/target/linux/ath79/image/tiny-tp-link.mk
@@ -272,6 +272,30 @@ define Device/tplink_tl-wr743nd-v1
endef
TARGET_DEVICES += tplink_tl-wr743nd-v1
+define Device/tplink_tl-wr802n-v1
+ $(Device/tplink-4mlzma)
+ SOC := qca9533
+ DEVICE_MODEL := TL-WR802N
+ DEVICE_VARIANT := v1
+ TPLINK_HWID := 0x08020001
+ SUPPORTED_DEVICES += tl-wr802n-v1
+endef
+TARGET_DEVICES += tplink_tl-wr802n-v1
+
+define Device/tplink_tl-wr802n-v2
+ $(Device/tplink-4mlzma)
+ SOC := qca9533
+ DEVICE_MODEL := TL-WR802N
+ DEVICE_VARIANT := v2
+ TPLINK_HWID := 0x08020002
+ TPLINK_HWREV := 2
+ SUPPORTED_DEVICES += tl-wr802n-v2
+ IMAGES += factory-us.bin factory-eu.bin
+ IMAGE/factory-us.bin := tplink-v1-image factory -C US
+ IMAGE/factory-eu.bin := tplink-v1-image factory -C EU
+endef
+TARGET_DEVICES += tplink_tl-wr802n-v2
+
define Device/tplink_tl-wr841-v5
$(Device/tplink-4m)
SOC := ar7240
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
index 5e559363b2..bff17bcce8 100755
--- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
@@ -43,7 +43,9 @@ ath79_setup_interfaces()
tplink,tl-wa901nd-v2|\
tplink,tl-wa901nd-v4|\
tplink,tl-wa901nd-v5|\
- tplink,tl-wr703n)
+ tplink,tl-wr703n|\
+ tplink,tl-wr802n-v1|\
+ tplink,tl-wr802n-v2)
ucidef_set_interface_lan "eth0"
;;
tplink,tl-mr3220-v1|\
diff --git a/target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration
new file mode 100644
index 0000000000..377135f530
--- /dev/null
+++ b/target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration
@@ -0,0 +1,18 @@
+. /lib/functions.sh
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+boardonly="${board##*,}"
+
+case "$board" in
+tplink,tl-wr802n-v1)
+ migrate_leds ":blue:=:green:"
+ ;;
+tplink,tl-wr802n-v2)
+ migrate_leds "^$boardonly:=tp-link:"
+ ;;
+esac
+
+migrations_apply system
+
+exit 0