diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2022-08-28 15:09:23 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-08-28 16:56:01 +0200 |
| commit | 9703a2adcc9511a8db33427e8110642b6a197873 (patch) | |
| tree | 2ed55e96b82e6a95a2318b20db803b695bc8237e | |
| parent | 251336639c7c6d5e9ab5d0e4491089c08749ce3c (diff) | |
| download | upstream-9703a2adcc9511a8db33427e8110642b6a197873.tar.gz upstream-9703a2adcc9511a8db33427e8110642b6a197873.tar.bz2 upstream-9703a2adcc9511a8db33427e8110642b6a197873.zip | |
kernel: Refresh on 5.10.138
Refresh all patches on top of kernel 5.10.138.
The following patches were applied upstream:
bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch
bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch
bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch
bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch
bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch
bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch
bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch
bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch
bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch
bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more.
bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch
Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138")
Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
88 files changed, 192 insertions, 1228 deletions
diff --git a/target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch b/target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch index e5b06e14a5..ad5257fabd 100644 --- a/target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch +++ b/target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/parsers/redboot.c +++ b/drivers/mtd/parsers/redboot.c -@@ -90,12 +90,18 @@ static int parse_redboot_partitions(stru +@@ -91,12 +91,18 @@ static int parse_redboot_partitions(stru parse_redboot_of(master); @@ -19,7 +19,7 @@ return -EIO; } offset -= master->erasesize; -@@ -108,10 +114,6 @@ static int parse_redboot_partitions(stru +@@ -109,10 +115,6 @@ static int parse_redboot_partitions(stru goto nogood; } } @@ -30,7 +30,7 @@ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", master->name, offset); -@@ -184,6 +186,11 @@ static int parse_redboot_partitions(stru +@@ -185,6 +187,11 @@ static int parse_redboot_partitions(stru } if (i == numslots) { /* Didn't find it */ diff --git a/target/linux/bcm27xx/patches-5.10/950-0006-smsx95xx-fix-crimes-against-truesize.patch b/target/linux/bcm27xx/patches-5.10/950-0006-smsx95xx-fix-crimes-against-truesize.patch index 1311400c2b..9db380f655 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0006-smsx95xx-fix-crimes-against-truesize.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0006-smsx95xx-fix-crimes-against-truesize.patch @@ -25,7 +25,7 @@ Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { -@@ -1839,7 +1843,8 @@ static int smsc95xx_rx_fixup(struct usbn +@@ -1838,7 +1842,8 @@ static int smsc95xx_rx_fixup(struct usbn if (dev->net->features & NETIF_F_RXCSUM) smsc95xx_rx_csum_offload(skb); skb_trim(skb, skb->len - 4); /* remove fcs */ @@ -35,7 +35,7 @@ Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> return 1; } -@@ -1857,7 +1862,8 @@ static int smsc95xx_rx_fixup(struct usbn +@@ -1856,7 +1861,8 @@ static int smsc95xx_rx_fixup(struct usbn if (dev->net->features & NETIF_F_RXCSUM) smsc95xx_rx_csum_offload(ax_skb); skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ diff --git a/target/linux/bcm27xx/patches-5.10/950-0007-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch b/target/linux/bcm27xx/patches-5.10/950-0007-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch index 0c010de8c8..a5e78bd326 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0007-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0007-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch @@ -22,7 +22,7 @@ See: http://forum.kodi.tv/showthread.php?tid=285288 static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { -@@ -917,13 +921,13 @@ static int smsc95xx_reset(struct usbnet +@@ -915,13 +919,13 @@ static int smsc95xx_reset(struct usbnet if (!turbo_mode) { burst_cap = 0; diff --git a/target/linux/bcm27xx/patches-5.10/950-0008-Allow-mac-address-to-be-set-in-smsc95xx.patch b/target/linux/bcm27xx/patches-5.10/950-0008-Allow-mac-address-to-be-set-in-smsc95xx.patch index 32caf0cb84..e465d90f3f 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0008-Allow-mac-address-to-be-set-in-smsc95xx.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0008-Allow-mac-address-to-be-set-in-smsc95xx.patch @@ -29,7 +29,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com> static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { -@@ -773,6 +778,53 @@ static int smsc95xx_ioctl(struct net_dev +@@ -771,6 +776,53 @@ static int smsc95xx_ioctl(struct net_dev return phy_mii_ioctl(netdev->phydev, rq, cmd); } @@ -83,7 +83,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com> static void smsc95xx_init_mac_address(struct usbnet *dev) { /* maybe the boot loader passed the MAC address in devicetree */ -@@ -795,6 +847,10 @@ static void smsc95xx_init_mac_address(st +@@ -793,6 +845,10 @@ static void smsc95xx_init_mac_address(st } } diff --git a/target/linux/bcm27xx/patches-5.10/950-0067-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch b/target/linux/bcm27xx/patches-5.10/950-0067-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch index b3c37af92a..a233e4da5a 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0067-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0067-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch @@ -10,7 +10,7 @@ Subject: [PATCH] ARM64: Force hardware emulation of deprecated --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c -@@ -182,10 +182,15 @@ static void __init register_insn_emulati +@@ -183,10 +183,15 @@ static void __init register_insn_emulati switch (ops->status) { case INSN_DEPRECATED: diff --git a/target/linux/bcm27xx/patches-5.10/950-0138-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch b/target/linux/bcm27xx/patches-5.10/950-0138-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch index db1cdebbbb..a58df1bd13 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0138-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0138-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch @@ -27,7 +27,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c -@@ -1966,6 +1966,16 @@ reset: +@@ -1969,6 +1969,16 @@ reset: return ret; } @@ -81,7 +81,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> extern int usb_driver_set_configuration(struct usb_device *udev, int config); --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h -@@ -384,6 +384,11 @@ struct hc_driver { +@@ -385,6 +385,11 @@ struct hc_driver { * or bandwidth constraints. */ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); @@ -93,7 +93,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> /* Returns the hardware-chosen device address */ int (*address_device)(struct usb_hcd *, struct usb_device *udev); /* prepares the hardware to send commands to the device */ -@@ -445,6 +450,8 @@ extern void usb_hcd_unmap_urb_setup_for_ +@@ -446,6 +451,8 @@ extern void usb_hcd_unmap_urb_setup_for_ extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); diff --git a/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch b/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch index e80e1a1e16..8483ce7c83 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch @@ -33,7 +33,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> #define USB_VENDOR_ID_BELKIN 0x050d #define USB_DEVICE_ID_FLIP_KVM 0x3201 -@@ -1271,6 +1274,9 @@ +@@ -1273,6 +1276,9 @@ #define USB_VENDOR_ID_XAT 0x2505 #define USB_DEVICE_ID_XAT_CSR 0x0220 diff --git a/target/linux/bcm27xx/patches-5.10/950-0162-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch b/target/linux/bcm27xx/patches-5.10/950-0162-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch index d011b0eb6c..8055eb2438 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0162-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0162-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch @@ -24,7 +24,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> --- a/Makefile +++ b/Makefile -@@ -1363,6 +1363,9 @@ ifneq ($(dtstree),) +@@ -1364,6 +1364,9 @@ ifneq ($(dtstree),) %.dtb: include/config/kernel.release scripts_dtc $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ diff --git a/target/linux/bcm27xx/patches-5.10/950-0192-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch b/target/linux/bcm27xx/patches-5.10/950-0192-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch index 7a5749e3ba..01b4e42bd2 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0192-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0192-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch @@ -15,7 +15,7 @@ Signed-off-by: Nataliya Korovkina <malus.brandywine@gmail.com> --- a/Makefile +++ b/Makefile -@@ -1363,7 +1363,7 @@ ifneq ($(dtstree),) +@@ -1364,7 +1364,7 @@ ifneq ($(dtstree),) %.dtb: include/config/kernel.release scripts_dtc $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ diff --git a/target/linux/bcm27xx/patches-5.10/950-0310-vc4_hdmi-Remove-cec_available-flag-as-always-support.patch b/target/linux/bcm27xx/patches-5.10/950-0310-vc4_hdmi-Remove-cec_available-flag-as-always-support.patch index 4c9e0d71f4..0f62612355 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0310-vc4_hdmi-Remove-cec_available-flag-as-always-support.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0310-vc4_hdmi-Remove-cec_available-flag-as-always-support.patch @@ -12,7 +12,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1493,9 +1493,6 @@ static int vc4_hdmi_cec_init(struct vc4_ +@@ -1487,9 +1487,6 @@ static int vc4_hdmi_cec_init(struct vc4_ u32 value; int ret; @@ -22,7 +22,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> vc4_hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops, vc4_hdmi, "vc4", CEC_CAP_DEFAULTS | -@@ -1928,7 +1925,6 @@ static const struct vc4_hdmi_variant bcm +@@ -1922,7 +1919,6 @@ static const struct vc4_hdmi_variant bcm .debugfs_name = "hdmi_regs", .card_name = "vc4-hdmi", .max_pixel_clock = 162000000, diff --git a/target/linux/bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch b/target/linux/bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch deleted file mode 100644 index b99102f6d2..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch +++ /dev/null @@ -1,54 +0,0 @@ -From d57ee5afedf0b1b9a9afb29357c484acda5a40af Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.com> -Date: Tue, 19 May 2020 14:54:28 +0100 -Subject: [PATCH] drm/vc4: Adopt the dma configuration from the HVS or - V3D component - -vc4_drv isn't necessarily under the /soc node in DT as it is a -virtual device, but it is the one that does the allocations. -The DMA addresses are consumed by primarily the HVS or V3D, and -those require VideoCore cache alias address mapping, and so will be -under /soc. - -During probe find the a suitable device node for HVS or V3D, -and adopt the DMA configuration of that node. - -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ---- - drivers/gpu/drm/vc4/vc4_drv.c | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -246,6 +246,14 @@ static void vc4_match_add_drivers(struct - } - } - -+const struct of_device_id vc4_dma_range_matches[] = { -+ { .compatible = "brcm,bcm2835-hvs" }, -+ { .compatible = "brcm,bcm2835-v3d" }, -+ { .compatible = "brcm,cygnus-v3d" }, -+ { .compatible = "brcm,vc4-v3d" }, -+ {} -+}; -+ - static int vc4_drm_bind(struct device *dev) - { - struct platform_device *pdev = to_platform_device(dev); -@@ -263,6 +271,16 @@ static int vc4_drm_bind(struct device *d - vc4_drm_driver.driver_features &= ~DRIVER_RENDER; - of_node_put(node); - -+ node = of_find_matching_node_and_match(NULL, vc4_dma_range_matches, -+ NULL); -+ if (node) { -+ ret = of_dma_configure(dev, node, true); -+ of_node_put(node); -+ -+ if (ret) -+ return ret; -+ } -+ - vc4 = devm_drm_dev_alloc(dev, &vc4_drm_driver, struct vc4_dev, base); - if (IS_ERR(vc4)) - return PTR_ERR(vc4); diff --git a/target/linux/bcm27xx/patches-5.10/950-0313-vc4_hdmi-Set-HDMI_MAI_FMT.patch b/target/linux/bcm27xx/patches-5.10/950-0313-vc4_hdmi-Set-HDMI_MAI_FMT.patch index e4f6f8795c..801d90db7f 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0313-vc4_hdmi-Set-HDMI_MAI_FMT.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0313-vc4_hdmi-Set-HDMI_MAI_FMT.patch @@ -14,7 +14,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -991,6 +991,44 @@ static void vc4_hdmi_audio_shutdown(stru +@@ -995,6 +995,44 @@ static void vc4_hdmi_audio_shutdown(stru vc4_hdmi->audio.substream = NULL; } @@ -59,7 +59,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> /* HDMI audio codec callbacks */ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, -@@ -1001,6 +1039,8 @@ static int vc4_hdmi_audio_hw_params(stru +@@ -1005,6 +1043,8 @@ static int vc4_hdmi_audio_hw_params(stru struct device *dev = &vc4_hdmi->pdev->dev; u32 audio_packet_config, channel_mask; u32 channel_map; @@ -68,7 +68,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> if (substream != vc4_hdmi->audio.substream) return -EINVAL; -@@ -1021,6 +1061,14 @@ static int vc4_hdmi_audio_hw_params(stru +@@ -1025,6 +1065,14 @@ static int vc4_hdmi_audio_hw_params(stru vc4_hdmi_audio_set_mai_clock(vc4_hdmi); diff --git a/target/linux/bcm27xx/patches-5.10/950-0314-drm-vc4-add-iec958-controls-to-vc4_hdmi.patch b/target/linux/bcm27xx/patches-5.10/950-0314-drm-vc4-add-iec958-controls-to-vc4_hdmi.patch index 9582c86871..b617c97923 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0314-drm-vc4-add-iec958-controls-to-vc4_hdmi.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0314-drm-vc4-add-iec958-controls-to-vc4_hdmi.patch @@ -26,7 +26,7 @@ Signed-off-by: Matthias Reichl <hias@horus.com> #include <sound/dmaengine_pcm.h> #include <sound/pcm_drm_eld.h> #include <sound/pcm_params.h> -@@ -1182,6 +1183,47 @@ static int vc4_hdmi_audio_eld_ctl_get(st +@@ -1176,6 +1177,47 @@ static int vc4_hdmi_audio_eld_ctl_get(st return 0; } @@ -74,7 +74,7 @@ Signed-off-by: Matthias Reichl <hias@horus.com> static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = { { .access = SNDRV_CTL_ELEM_ACCESS_READ | -@@ -1191,6 +1233,19 @@ static const struct snd_kcontrol_new vc4 +@@ -1185,6 +1227,19 @@ static const struct snd_kcontrol_new vc4 .info = vc4_hdmi_audio_eld_ctl_info, .get = vc4_hdmi_audio_eld_ctl_get, }, @@ -94,7 +94,7 @@ Signed-off-by: Matthias Reichl <hias@horus.com> }; static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = { -@@ -1311,6 +1366,11 @@ static int vc4_hdmi_audio_init(struct vc +@@ -1305,6 +1360,11 @@ static int vc4_hdmi_audio_init(struct vc vc4_hdmi->audio.dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; vc4_hdmi->audio.dma_data.maxburst = 2; diff --git a/target/linux/bcm27xx/patches-5.10/950-0315-drm-vc4-move-setup-from-hw_params-to-prepare.patch b/target/linux/bcm27xx/patches-5.10/950-0315-drm-vc4-move-setup-from-hw_params-to-prepare.patch index 9b90426393..25792b28fd 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0315-drm-vc4-move-setup-from-hw_params-to-prepare.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0315-drm-vc4-move-setup-from-hw_params-to-prepare.patch @@ -14,7 +14,7 @@ Signed-off-by: Matthias Reichl <hias@horus.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1031,9 +1031,8 @@ static int sample_rate_to_mai_fmt(int sa +@@ -1035,9 +1035,8 @@ static int sample_rate_to_mai_fmt(int sa } /* HDMI audio codec callbacks */ @@ -26,7 +26,7 @@ Signed-off-by: Matthias Reichl <hias@horus.com> { struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai); struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base; -@@ -1046,12 +1045,15 @@ static int vc4_hdmi_audio_hw_params(stru +@@ -1050,12 +1049,15 @@ static int vc4_hdmi_audio_hw_params(stru if (substream != vc4_hdmi->audio.substream) return -EINVAL; @@ -47,7 +47,7 @@ Signed-off-by: Matthias Reichl <hias@horus.com> HDMI_WRITE(HDMI_MAI_CTL, VC4_HD_MAI_CTL_RESET | -@@ -1273,7 +1275,7 @@ static const struct snd_soc_component_dr +@@ -1267,7 +1269,7 @@ static const struct snd_soc_component_dr static const struct snd_soc_dai_ops vc4_hdmi_audio_dai_ops = { .startup = vc4_hdmi_audio_startup, .shutdown = vc4_hdmi_audio_shutdown, diff --git a/target/linux/bcm27xx/patches-5.10/950-0316-drm-vc4-enable-HBR-MAI-format-on-HBR-streams.patch b/target/linux/bcm27xx/patches-5.10/950-0316-drm-vc4-enable-HBR-MAI-format-on-HBR-streams.patch index 1fbda20137..fc722e58cc 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0316-drm-vc4-enable-HBR-MAI-format-on-HBR-streams.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0316-drm-vc4-enable-HBR-MAI-format-on-HBR-streams.patch @@ -10,7 +10,7 @@ Signed-off-by: Matthias Reichl <hias@horus.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1065,7 +1065,11 @@ static int vc4_hdmi_audio_prepare(struct +@@ -1069,7 +1069,11 @@ static int vc4_hdmi_audio_prepare(struct vc4_hdmi_audio_set_mai_clock(vc4_hdmi); mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate); diff --git a/target/linux/bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch b/target/linux/bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch deleted file mode 100644 index ef776face1..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 3c398513990aa0edc5b9ebfbdd2395623562c6e4 Mon Sep 17 00:00:00 2001 -From: Dom Cobley <popcornmix@gmail.com> -Date: Thu, 25 Jun 2020 18:48:40 +0100 -Subject: [PATCH] vc4_hdmi: Remove firmware logic for MAI threshold - setting - -This was a workaround for bugs in hardware on earlier Pi models -and wasn't totally successful. - -It makes audio quality worse on a Pi4 at the higher sample rates - -Signed-off-by: Dom Cobley <popcornmix@gmail.com> ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 22 ++++++---------------- - 1 file changed, 6 insertions(+), 16 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1086,22 +1086,12 @@ static int vc4_hdmi_audio_prepare(struct - audio_packet_config |= VC4_SET_FIELD(channel_mask, - VC4_HDMI_AUDIO_PACKET_CEA_MASK); - -- /* Set the MAI threshold. This logic mimics the firmware's. */ -- if (vc4_hdmi->audio.samplerate > 96000) { -- HDMI_WRITE(HDMI_MAI_THR, -- VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQHIGH) | -- VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW)); -- } else if (vc4_hdmi->audio.samplerate > 48000) { -- HDMI_WRITE(HDMI_MAI_THR, -- VC4_SET_FIELD(0x14, VC4_HD_MAI_THR_DREQHIGH) | -- VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW)); -- } else { -- HDMI_WRITE(HDMI_MAI_THR, -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) | -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) | -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) | -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW)); -- } -+ /* Set the MAI threshold */ -+ HDMI_WRITE(HDMI_MAI_THR, -+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) | -+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) | -+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) | -+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW)); - - HDMI_WRITE(HDMI_MAI_CONFIG, - VC4_HDMI_MAI_CONFIG_BIT_REVERSE | diff --git a/target/linux/bcm27xx/patches-5.10/950-0318-vc_hdmi-Set-VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE.patch b/target/linux/bcm27xx/patches-5.10/950-0318-vc_hdmi-Set-VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE.patch index 1767ccf4a5..773ddf1f01 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0318-vc_hdmi-Set-VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0318-vc_hdmi-Set-VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE.patch @@ -14,7 +14,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1095,6 +1095,7 @@ static int vc4_hdmi_audio_prepare(struct +@@ -1099,6 +1099,7 @@ static int vc4_hdmi_audio_prepare(struct HDMI_WRITE(HDMI_MAI_CONFIG, VC4_HDMI_MAI_CONFIG_BIT_REVERSE | diff --git a/target/linux/bcm27xx/patches-5.10/950-0319-drm-vc4-Add-support-for-DRM_FORMAT_P030-to-vc4-plane.patch b/target/linux/bcm27xx/patches-5.10/950-0319-drm-vc4-Add-support-for-DRM_FORMAT_P030-to-vc4-plane.patch index c3db8c7319..4af45139ce 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0319-drm-vc4-Add-support-for-DRM_FORMAT_P030-to-vc4-plane.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0319-drm-vc4-Add-support-for-DRM_FORMAT_P030-to-vc4-plane.patch @@ -38,7 +38,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> }; static const struct hvs_format *vc4_get_hvs_format(u32 drm_format) -@@ -769,27 +776,33 @@ static int vc4_plane_mode_set(struct drm +@@ -765,27 +772,33 @@ static int vc4_plane_mode_set(struct drm uint32_t param = fourcc_mod_broadcom_param(fb->modifier); u32 tile_w, tile, x_off, pix_per_tile; @@ -90,7 +90,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> return -EINVAL; } -@@ -799,6 +812,13 @@ static int vc4_plane_mode_set(struct drm +@@ -795,6 +808,13 @@ static int vc4_plane_mode_set(struct drm /* Adjust the base pointer to the first pixel to be scanned * out. @@ -104,7 +104,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> */ for (i = 0; i < num_planes; i++) { vc4_state->offsets[i] += param * tile_w * tile; -@@ -960,7 +980,8 @@ static int vc4_plane_mode_set(struct drm +@@ -956,7 +976,8 @@ static int vc4_plane_mode_set(struct drm /* Pitch word 1/2 */ for (i = 1; i < num_planes; i++) { @@ -114,7 +114,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> vc4_dlist_write(vc4_state, VC4_SET_FIELD(fb->pitches[i], SCALER_SRC_PITCH)); -@@ -1320,6 +1341,13 @@ static bool vc4_format_mod_supported(str +@@ -1316,6 +1337,13 @@ static bool vc4_format_mod_supported(str default: return false; } @@ -128,7 +128,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> case DRM_FORMAT_RGBX1010102: case DRM_FORMAT_BGRX1010102: case DRM_FORMAT_RGBA1010102: -@@ -1352,8 +1380,11 @@ struct drm_plane *vc4_plane_init(struct +@@ -1348,8 +1376,11 @@ struct drm_plane *vc4_plane_init(struct struct drm_plane *plane = NULL; struct vc4_plane *vc4_plane; u32 formats[ARRAY_SIZE(hvs_formats)]; @@ -140,7 +140,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> static const uint64_t modifiers[] = { DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, DRM_FORMAT_MOD_BROADCOM_SAND128, -@@ -1368,13 +1399,17 @@ struct drm_plane *vc4_plane_init(struct +@@ -1364,13 +1395,17 @@ struct drm_plane *vc4_plane_init(struct if (!vc4_plane) return ERR_PTR(-ENOMEM); diff --git a/target/linux/bcm27xx/patches-5.10/950-0320-drm-vc4-Add-support-for-YUV-color-encodings-and-rang.patch b/target/linux/bcm27xx/patches-5.10/950-0320-drm-vc4-Add-support-for-YUV-color-encodings-and-rang.patch index 23f0533472..d056739838 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0320-drm-vc4-Add-support-for-YUV-color-encodings-and-rang.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0320-drm-vc4-Add-support-for-YUV-color-encodings-and-rang.patch @@ -18,7 +18,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -628,6 +628,53 @@ static int vc4_plane_allocate_lbm(struct +@@ -624,6 +624,53 @@ static int vc4_plane_allocate_lbm(struct return 0; } @@ -72,7 +72,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> /* Writes out a full display list for an active plane to the plane's * private dlist state. */ -@@ -992,9 +1039,20 @@ static int vc4_plane_mode_set(struct drm +@@ -988,9 +1035,20 @@ static int vc4_plane_mode_set(struct drm /* Colorspace conversion words */ if (vc4_state->is_yuv) { @@ -96,7 +96,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> } vc4_state->lbm_offset = 0; -@@ -1423,6 +1481,14 @@ struct drm_plane *vc4_plane_init(struct +@@ -1419,6 +1477,14 @@ struct drm_plane *vc4_plane_init(struct DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y); diff --git a/target/linux/bcm27xx/patches-5.10/950-0321-drm-vc4-Add-firmware-kms-mode.patch b/target/linux/bcm27xx/patches-5.10/950-0321-drm-vc4-Add-firmware-kms-mode.patch index 751c75fc32..947d3855dc 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0321-drm-vc4-Add-firmware-kms-mode.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0321-drm-vc4-Add-firmware-kms-mode.patch @@ -44,7 +44,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> vc4_hdmi.o \ --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -307,9 +307,11 @@ static int vc4_drm_bind(struct device *d +@@ -308,9 +308,11 @@ static int vc4_drm_bind(struct device *d if (ret) return ret; @@ -59,7 +59,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm_fb_helper_remove_conflicting_framebuffers(NULL, "vc4drmfb", false); -@@ -317,8 +319,10 @@ static int vc4_drm_bind(struct device *d +@@ -318,8 +320,10 @@ static int vc4_drm_bind(struct device *d if (ret < 0) goto unbind_all; @@ -72,7 +72,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ret = drm_dev_register(drm, 0); if (ret < 0) -@@ -356,6 +360,7 @@ static struct platform_driver *const com +@@ -357,6 +361,7 @@ static struct platform_driver *const com &vc4_hvs_driver, &vc4_txp_driver, &vc4_crtc_driver, @@ -82,7 +82,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -74,12 +74,17 @@ struct vc4_perfmon { +@@ -74,11 +74,16 @@ struct vc4_perfmon { struct vc4_dev { struct drm_device base; @@ -93,14 +93,13 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> struct vc4_hvs *hvs; struct vc4_v3d *v3d; struct vc4_dpi *dpi; - struct vc4_dsi *dsi1; struct vc4_vec *vec; struct vc4_txp *txp; + struct vc4_fkms *fkms; struct vc4_hang_state *hang_state; -@@ -877,6 +882,9 @@ extern struct platform_driver vc4_dsi_dr +@@ -876,6 +881,9 @@ extern struct platform_driver vc4_dsi_dr /* vc4_fence.c */ extern const struct dma_fence_ops vc4_fence_ops; diff --git a/target/linux/bcm27xx/patches-5.10/950-0322-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch b/target/linux/bcm27xx/patches-5.10/950-0322-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch index d3f5582732..66669c3064 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0322-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0322-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch @@ -17,9 +17,9 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -248,6 +248,7 @@ static void vc4_match_add_drivers(struct - - const struct of_device_id vc4_dma_range_matches[] = { +@@ -249,6 +249,7 @@ static void vc4_match_add_drivers(struct + static const struct of_device_id vc4_dma_range_matches[] = { + { .compatible = "brcm,bcm2711-hvs" }, { .compatible = "brcm,bcm2835-hvs" }, + { .compatible = "raspberrypi,rpi-firmware-kms" }, { .compatible = "brcm,bcm2835-v3d" }, diff --git a/target/linux/bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch b/target/linux/bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch deleted file mode 100644 index 373f98cbd9..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 4de61df3c777ea6265d03be98b315c8644003ceb Mon Sep 17 00:00:00 2001 -From: Phil Elwell <phil@raspberrypi.org> -Date: Wed, 31 Jul 2019 17:36:34 +0100 -Subject: [PATCH] drm/vc4: A present but empty dmas disables audio - -Overlays are unable to remove properties in the base DTB, but they -can overwrite them. Allow a present but empty 'dmas' property -to also disable the HDMI audio interface. - -See: https://github.com/raspberrypi/linux/issues/2489 - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1333,10 +1333,12 @@ static int vc4_hdmi_audio_init(struct vc - const __be32 *addr; - int index; - int ret; -+ int len; - -- if (!of_find_property(dev->of_node, "dmas", NULL)) { -+ if (!of_find_property(dev->of_node, "dmas", &len) || -+ len == 0) { - dev_warn(dev, -- "'dmas' DT property is missing, no HDMI audio\n"); -+ "'dmas' DT property is missing or empty, no HDMI audio\n"); - return 0; - } - diff --git a/target/linux/bcm27xx/patches-5.10/950-0349-drm-vc4-Add-all-the-HDMI-registers-into-the-debugfs-.patch b/target/linux/bcm27xx/patches-5.10/950-0349-drm-vc4-Add-all-the-HDMI-registers-into-the-debugfs-.patch index 4a4c535706..7c5fee900d 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0349-drm-vc4-Add-all-the-HDMI-registers-into-the-debugfs-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0349-drm-vc4-Add-all-the-HDMI-registers-into-the-debugfs-.patch @@ -16,7 +16,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -92,6 +92,12 @@ static int vc4_hdmi_debugfs_regs(struct +@@ -94,6 +94,12 @@ static int vc4_hdmi_debugfs_regs(struct drm_print_regset32(&p, &vc4_hdmi->hdmi_regset); drm_print_regset32(&p, &vc4_hdmi->hd_regset); @@ -29,7 +29,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> return 0; } -@@ -1734,6 +1740,7 @@ static int vc5_hdmi_init_resources(struc +@@ -1736,6 +1742,7 @@ static int vc5_hdmi_init_resources(struc struct platform_device *pdev = vc4_hdmi->pdev; struct device *dev = &pdev->dev; struct resource *res; @@ -37,7 +37,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hdmi"); if (!res) -@@ -1824,6 +1831,38 @@ static int vc5_hdmi_init_resources(struc +@@ -1826,6 +1833,38 @@ static int vc5_hdmi_init_resources(struc return PTR_ERR(vc4_hdmi->reset); } diff --git a/target/linux/bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch b/target/linux/bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch deleted file mode 100644 index dbef01b24f..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 2b8894c7231f02a03e13c1785ed706471d511f8d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.com> -Date: Mon, 26 Oct 2020 12:38:27 +0000 -Subject: [PATCH] drm/vc4: Add the 2711 HVS as a suitable DMA node - -With vc4-drv node not being under /soc on Pi4, we need to -adopt the correct DMA parameters from a suitable sub-component. -Add "brcm,bcm2711-hvs" to that list of components. - -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ---- - drivers/gpu/drm/vc4/vc4_drv.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -248,6 +248,7 @@ static void vc4_match_add_drivers(struct - - const struct of_device_id vc4_dma_range_matches[] = { - { .compatible = "brcm,bcm2835-hvs" }, -+ { .compatible = "brcm,bcm2711-hvs" }, - { .compatible = "raspberrypi,rpi-firmware-kms" }, - { .compatible = "brcm,bcm2835-v3d" }, - { .compatible = "brcm,cygnus-v3d" }, diff --git a/target/linux/bcm27xx/patches-5.10/950-0377-vc4_hdmi-Report-that-3d-stereo-is-allowed.patch b/target/linux/bcm27xx/patches-5.10/950-0377-vc4_hdmi-Report-that-3d-stereo-is-allowed.patch index 67f2bf3582..597ae0e10e 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0377-vc4_hdmi-Report-that-3d-stereo-is-allowed.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0377-vc4_hdmi-Report-that-3d-stereo-is-allowed.patch @@ -10,7 +10,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -257,6 +257,7 @@ static int vc4_hdmi_connector_init(struc +@@ -261,6 +261,7 @@ static int vc4_hdmi_connector_init(struc connector->interlace_allowed = 1; connector->doublescan_allowed = 0; diff --git a/target/linux/bcm27xx/patches-5.10/950-0379-vc4-Clear-unused-infoframe-packet-RAM-registers.patch b/target/linux/bcm27xx/patches-5.10/950-0379-vc4-Clear-unused-infoframe-packet-RAM-registers.patch index fdc29cf586..0fbf3312da 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0379-vc4-Clear-unused-infoframe-packet-RAM-registers.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0379-vc4-Clear-unused-infoframe-packet-RAM-registers.patch @@ -16,7 +16,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -285,9 +285,11 @@ static void vc4_hdmi_write_infoframe(str +@@ -289,9 +289,11 @@ static void vc4_hdmi_write_infoframe(str const struct vc4_hdmi_register *ram_packet_start = &vc4_hdmi->variant->registers[HDMI_RAM_PACKET_START]; u32 packet_reg = ram_packet_start->offset + VC4_HDMI_PACKET_STRIDE * packet_id; @@ -29,7 +29,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> ssize_t len, i; int ret; -@@ -320,6 +322,13 @@ static void vc4_hdmi_write_infoframe(str +@@ -324,6 +326,13 @@ static void vc4_hdmi_write_infoframe(str packet_reg += 4; } diff --git a/target/linux/bcm27xx/patches-5.10/950-0389-drm-vc4-Correct-DSI-register-definition.patch b/target/linux/bcm27xx/patches-5.10/950-0389-drm-vc4-Correct-DSI-register-definition.patch index f8a2a69354..1de135470d 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0389-drm-vc4-Correct-DSI-register-definition.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0389-drm-vc4-Correct-DSI-register-definition.patch @@ -18,7 +18,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -306,11 +306,11 @@ +@@ -348,11 +348,11 @@ # define DSI0_PHY_AFEC0_RESET BIT(11) # define DSI1_PHY_AFEC0_PD_BG BIT(11) # define DSI0_PHY_AFEC0_PD BIT(10) diff --git a/target/linux/bcm27xx/patches-5.10/950-0408-drm-atomic-Pass-the-full-state-to-CRTC-atomic-enable.patch b/target/linux/bcm27xx/patches-5.10/950-0408-drm-atomic-Pass-the-full-state-to-CRTC-atomic-enable.patch index 90199eab2d..deced715d1 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0408-drm-atomic-Pass-the-full-state-to-CRTC-atomic-enable.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0408-drm-atomic-Pass-the-full-state-to-CRTC-atomic-enable.patch @@ -955,7 +955,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef1 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -489,8 +489,10 @@ int vc4_crtc_disable_at_boot(struct drm_ +@@ -491,8 +491,10 @@ int vc4_crtc_disable_at_boot(struct drm_ } static void vc4_crtc_atomic_disable(struct drm_crtc *crtc, @@ -967,7 +967,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef1 struct vc4_crtc_state *old_vc4_state = to_vc4_crtc_state(old_state); struct drm_device *dev = crtc->dev; -@@ -516,8 +518,10 @@ static void vc4_crtc_atomic_disable(stru +@@ -518,8 +520,10 @@ static void vc4_crtc_atomic_disable(stru } static void vc4_crtc_atomic_enable(struct drm_crtc *crtc, diff --git a/target/linux/bcm27xx/patches-5.10/950-0409-drm-atomic-Pass-the-full-state-to-CRTC-atomic_check.patch b/target/linux/bcm27xx/patches-5.10/950-0409-drm-atomic-Pass-the-full-state-to-CRTC-atomic_check.patch index 7d55968c2d..03fec98df8 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0409-drm-atomic-Pass-the-full-state-to-CRTC-atomic_check.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0409-drm-atomic-Pass-the-full-state-to-CRTC-atomic_check.patch @@ -858,7 +858,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-max } --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -601,18 +601,21 @@ void vc4_crtc_get_margins(struct drm_crt +@@ -603,18 +603,21 @@ void vc4_crtc_get_margins(struct drm_crt } static int vc4_crtc_atomic_check(struct drm_crtc *crtc, diff --git a/target/linux/bcm27xx/patches-5.10/950-0410-drm-atomic-Pass-the-full-state-to-CRTC-atomic-begin-.patch b/target/linux/bcm27xx/patches-5.10/950-0410-drm-atomic-Pass-the-full-state-to-CRTC-atomic-begin-.patch index c7f509f21c..2c9fa483a4 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0410-drm-atomic-Pass-the-full-state-to-CRTC-atomic-begin-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0410-drm-atomic-Pass-the-full-state-to-CRTC-atomic-begin-.patch @@ -885,7 +885,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-max --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -928,7 +928,8 @@ int vc4_hvs_get_fifo_from_output(struct +@@ -927,7 +927,8 @@ int vc4_hvs_get_fifo_from_output(struct int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state); void vc4_hvs_atomic_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state); void vc4_hvs_atomic_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state); diff --git a/target/linux/bcm27xx/patches-5.10/950-0411-drm-vc4-hvs-Align-the-HVS-atomic-hooks-to-the-new-AP.patch b/target/linux/bcm27xx/patches-5.10/950-0411-drm-vc4-hvs-Align-the-HVS-atomic-hooks-to-the-new-AP.patch index 3aa5f9ea93..ea19269960 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0411-drm-vc4-hvs-Align-the-HVS-atomic-hooks-to-the-new-AP.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0411-drm-vc4-hvs-Align-the-HVS-atomic-hooks-to-the-new-AP.patch @@ -19,7 +19,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -520,8 +520,6 @@ static void vc4_crtc_atomic_disable(stru +@@ -522,8 +522,6 @@ static void vc4_crtc_atomic_disable(stru static void vc4_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state) { @@ -28,7 +28,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct drm_device *dev = crtc->dev; struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc); -@@ -534,7 +532,7 @@ static void vc4_crtc_atomic_enable(struc +@@ -536,7 +534,7 @@ static void vc4_crtc_atomic_enable(struc */ drm_crtc_vblank_on(crtc); @@ -39,7 +39,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> vc4_encoder->pre_crtc_configure(encoder); --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -926,8 +926,8 @@ extern struct platform_driver vc4_hvs_dr +@@ -925,8 +925,8 @@ extern struct platform_driver vc4_hvs_dr void vc4_hvs_stop_channel(struct drm_device *dev, unsigned int output); int vc4_hvs_get_fifo_from_output(struct drm_device *dev, unsigned int output); int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state); diff --git a/target/linux/bcm27xx/patches-5.10/950-0412-drm-vc4-Pass-the-atomic-state-to-encoder-hooks.patch b/target/linux/bcm27xx/patches-5.10/950-0412-drm-vc4-Pass-the-atomic-state-to-encoder-hooks.patch index 38f354f963..21c0537e8b 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0412-drm-vc4-Pass-the-atomic-state-to-encoder-hooks.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0412-drm-vc4-Pass-the-atomic-state-to-encoder-hooks.patch @@ -16,7 +16,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -420,7 +420,9 @@ static void require_hvs_enabled(struct d +@@ -422,7 +422,9 @@ static void require_hvs_enabled(struct d SCALER_DISPCTRL_ENABLE); } @@ -27,7 +27,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> { struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc); struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); -@@ -452,13 +454,13 @@ static int vc4_crtc_disable(struct drm_c +@@ -454,13 +456,13 @@ static int vc4_crtc_disable(struct drm_c mdelay(20); if (vc4_encoder && vc4_encoder->post_crtc_disable) @@ -43,7 +43,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return 0; } -@@ -485,7 +487,7 @@ int vc4_crtc_disable_at_boot(struct drm_ +@@ -487,7 +489,7 @@ int vc4_crtc_disable_at_boot(struct drm_ if (channel < 0) return 0; @@ -52,7 +52,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> } static void vc4_crtc_atomic_disable(struct drm_crtc *crtc, -@@ -501,7 +503,7 @@ static void vc4_crtc_atomic_disable(stru +@@ -503,7 +505,7 @@ static void vc4_crtc_atomic_disable(stru /* Disable vblank irq handling before crtc is disabled. */ drm_crtc_vblank_off(crtc); @@ -61,7 +61,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> /* * Make sure we issue a vblank event after disabling the CRTC if -@@ -535,14 +537,14 @@ static void vc4_crtc_atomic_enable(struc +@@ -537,14 +539,14 @@ static void vc4_crtc_atomic_enable(struc vc4_hvs_atomic_enable(crtc, state); if (vc4_encoder->pre_crtc_configure) @@ -78,7 +78,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> /* When feeding the transposer block the pixelvalve is unneeded and * should not be enabled. -@@ -551,7 +553,7 @@ static void vc4_crtc_atomic_enable(struc +@@ -553,7 +555,7 @@ static void vc4_crtc_atomic_enable(struc CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN); if (vc4_encoder->post_crtc_enable) @@ -89,7 +89,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static enum drm_mode_status vc4_crtc_mode_valid(struct drm_crtc *crtc, --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -449,12 +449,12 @@ struct vc4_encoder { +@@ -448,12 +448,12 @@ struct vc4_encoder { enum vc4_encoder_type type; u32 clock_select; @@ -109,7 +109,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static inline struct vc4_encoder * --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -412,7 +412,8 @@ static void vc4_hdmi_set_infoframes(stru +@@ -416,7 +416,8 @@ static void vc4_hdmi_set_infoframes(stru vc4_hdmi_set_audio_infoframe(encoder); } @@ -119,7 +119,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> { struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); -@@ -425,7 +426,8 @@ static void vc4_hdmi_encoder_post_crtc_d +@@ -429,7 +430,8 @@ static void vc4_hdmi_encoder_post_crtc_d HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_BLANKPIX); } @@ -129,7 +129,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> { struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); int ret; -@@ -638,7 +640,8 @@ static void vc4_hdmi_recenter_fifo(struc +@@ -642,7 +644,8 @@ static void vc4_hdmi_recenter_fifo(struc "VC4_HDMI_FIFO_CTL_RECENTER_DONE"); } @@ -139,7 +139,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> { struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); -@@ -720,7 +723,8 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -724,7 +727,8 @@ static void vc4_hdmi_encoder_pre_crtc_co vc4_hdmi->variant->set_timings(vc4_hdmi, mode); } @@ -149,7 +149,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> { struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder); -@@ -742,7 +746,8 @@ static void vc4_hdmi_encoder_pre_crtc_en +@@ -746,7 +750,8 @@ static void vc4_hdmi_encoder_pre_crtc_en HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N); } diff --git a/target/linux/bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch b/target/linux/bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch deleted file mode 100644 index b524ba277e..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch +++ /dev/null @@ -1,35 +0,0 @@ -From e1b4f5c3970e14abe197f328077b348b4969e68f Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime@cerno.tech> -Date: Tue, 15 Dec 2020 16:42:38 +0100 -Subject: [PATCH] drm/vc4: hdmi: Don't access the connector state in - reset if kmalloc fails - -drm_atomic_helper_connector_reset uses kmalloc which, from an API -standpoint, can fail, and thus setting connector->state to NULL. -However, our reset hook then calls drm_atomic_helper_connector_tv_reset -that will access connector->state without checking if it's a valid -pointer or not. - -Make sure we don't end up accessing a NULL pointer. - -Acked-by: Thomas Zimmermann <tzimmermann@suse.de> -Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> -Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> -Signed-off-by: Maxime Ripard <maxime@cerno.tech> ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -216,7 +216,9 @@ static int vc4_hdmi_connector_get_modes( - static void vc4_hdmi_connector_reset(struct drm_connector *connector) - { - drm_atomic_helper_connector_reset(connector); -- drm_atomic_helper_connector_tv_reset(connector); -+ -+ if (connector->state) -+ drm_atomic_helper_connector_tv_reset(connector); - } - - static const struct drm_connector_funcs vc4_hdmi_connector_funcs = { diff --git a/target/linux/bcm27xx/patches-5.10/950-0414-drm-vc4-hdmi-Create-a-custom-connector-state.patch b/target/linux/bcm27xx/patches-5.10/950-0414-drm-vc4-hdmi-Create-a-custom-connector-state.patch index 941730e1c8..179c06bf22 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0414-drm-vc4-hdmi-Create-a-custom-connector-state.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0414-drm-vc4-hdmi-Create-a-custom-connector-state.patch @@ -18,7 +18,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -215,10 +215,37 @@ static int vc4_hdmi_connector_get_modes( +@@ -217,10 +217,37 @@ static int vc4_hdmi_connector_get_modes( static void vc4_hdmi_connector_reset(struct drm_connector *connector) { @@ -58,7 +58,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> } static const struct drm_connector_funcs vc4_hdmi_connector_funcs = { -@@ -226,7 +253,7 @@ static const struct drm_connector_funcs +@@ -228,7 +255,7 @@ static const struct drm_connector_funcs .fill_modes = drm_helper_probe_single_connector_modes, .destroy = vc4_hdmi_connector_destroy, .reset = vc4_hdmi_connector_reset, diff --git a/target/linux/bcm27xx/patches-5.10/950-0415-drm-vc4-hdmi-Store-pixel-frequency-in-the-connector-.patch b/target/linux/bcm27xx/patches-5.10/950-0415-drm-vc4-hdmi-Store-pixel-frequency-in-the-connector-.patch index 719f9235e5..9f0f7e5e59 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0415-drm-vc4-hdmi-Store-pixel-frequency-in-the-connector-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0415-drm-vc4-hdmi-Store-pixel-frequency-in-the-connector-.patch @@ -21,7 +21,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -243,6 +243,7 @@ vc4_hdmi_connector_duplicate_state(struc +@@ -245,6 +245,7 @@ vc4_hdmi_connector_duplicate_state(struc if (!new_state) return NULL; @@ -29,7 +29,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base); return &new_state->base; -@@ -669,9 +670,29 @@ static void vc4_hdmi_recenter_fifo(struc +@@ -671,9 +672,29 @@ static void vc4_hdmi_recenter_fifo(struc "VC4_HDMI_FIFO_CTL_RECENTER_DONE"); } @@ -59,7 +59,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); unsigned long pixel_rate, hsm_rate; -@@ -683,7 +704,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -685,7 +706,7 @@ static void vc4_hdmi_encoder_pre_crtc_co return; } @@ -68,7 +68,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate); if (ret) { DRM_ERROR("Failed to set pixel clock rate: %d\n", ret); -@@ -845,6 +866,7 @@ static int vc4_hdmi_encoder_atomic_check +@@ -847,6 +868,7 @@ static int vc4_hdmi_encoder_atomic_check struct drm_crtc_state *crtc_state, struct drm_connector_state *conn_state) { @@ -76,7 +76,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct drm_display_mode *mode = &crtc_state->adjusted_mode; struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); unsigned long long pixel_rate = mode->clock * 1000; -@@ -876,6 +898,8 @@ static int vc4_hdmi_encoder_atomic_check +@@ -878,6 +900,8 @@ static int vc4_hdmi_encoder_atomic_check if (pixel_rate > vc4_hdmi->variant->max_pixel_clock) return -EINVAL; diff --git a/target/linux/bcm27xx/patches-5.10/950-0416-drm-vc4-hdmi-Use-the-connector-state-pixel-rate-for-.patch b/target/linux/bcm27xx/patches-5.10/950-0416-drm-vc4-hdmi-Use-the-connector-state-pixel-rate-for-.patch index a4ca7cb6fd..64949ffb1f 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0416-drm-vc4-hdmi-Use-the-connector-state-pixel-rate-for-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0416-drm-vc4-hdmi-Use-the-connector-state-pixel-rate-for-.patch @@ -22,7 +22,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -762,7 +762,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -764,7 +764,7 @@ static void vc4_hdmi_encoder_pre_crtc_co } if (vc4_hdmi->variant->phy_init) diff --git a/target/linux/bcm27xx/patches-5.10/950-0417-drm-vc4-hdmi-Enable-10-12-bpc-output.patch b/target/linux/bcm27xx/patches-5.10/950-0417-drm-vc4-hdmi-Enable-10-12-bpc-output.patch index 646475fa80..a887f383e9 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0417-drm-vc4-hdmi-Enable-10-12-bpc-output.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0417-drm-vc4-hdmi-Enable-10-12-bpc-output.patch @@ -34,7 +34,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> # define VC4_HD_M_SW_RST BIT(2) # define VC4_HD_M_ENABLE BIT(0) -@@ -229,6 +240,8 @@ static void vc4_hdmi_connector_reset(str +@@ -231,6 +242,8 @@ static void vc4_hdmi_connector_reset(str if (!new_state) return; @@ -43,7 +43,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm_atomic_helper_connector_tv_reset(connector); } -@@ -275,12 +288,20 @@ static int vc4_hdmi_connector_init(struc +@@ -277,12 +290,20 @@ static int vc4_hdmi_connector_init(struc vc4_hdmi->ddc); drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs); @@ -64,7 +64,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> connector->polled = (DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT); -@@ -555,6 +576,7 @@ static void vc5_hdmi_csc_setup(struct vc +@@ -557,6 +578,7 @@ static void vc5_hdmi_csc_setup(struct vc } static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi, @@ -72,7 +72,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> struct drm_display_mode *mode) { bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC; -@@ -598,7 +620,9 @@ static void vc4_hdmi_set_timings(struct +@@ -600,7 +622,9 @@ static void vc4_hdmi_set_timings(struct HDMI_WRITE(HDMI_VERTB0, vertb_even); HDMI_WRITE(HDMI_VERTB1, vertb); } @@ -82,9 +82,9 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> struct drm_display_mode *mode) { bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC; -@@ -618,6 +642,9 @@ static void vc5_hdmi_set_timings(struct - mode->crtc_vsync_end - - interlaced, +@@ -620,6 +644,9 @@ static void vc5_hdmi_set_timings(struct + VC4_SET_FIELD(mode->crtc_vtotal - + mode->crtc_vsync_end - interlaced, VC4_HDMI_VERTB_VBP)); + unsigned char gcp; + bool gcp_en; @@ -92,7 +92,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021); HDMI_WRITE(HDMI_HORZA, -@@ -643,6 +670,39 @@ static void vc5_hdmi_set_timings(struct +@@ -645,6 +672,39 @@ static void vc5_hdmi_set_timings(struct HDMI_WRITE(HDMI_VERTB0, vertb_even); HDMI_WRITE(HDMI_VERTB1, vertb); @@ -132,7 +132,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> HDMI_WRITE(HDMI_CLOCK_STOP, 0); } -@@ -770,7 +830,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -772,7 +832,7 @@ static void vc4_hdmi_encoder_pre_crtc_co VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS); if (vc4_hdmi->variant->set_timings) @@ -141,7 +141,7 @@ Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> } static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder, -@@ -892,6 +952,14 @@ static int vc4_hdmi_encoder_atomic_check +@@ -894,6 +954,14 @@ static int vc4_hdmi_encoder_atomic_check pixel_rate = mode->clock * 1000; } diff --git a/target/linux/bcm27xx/patches-5.10/950-0456-drm-vc4-hdmi-Update-the-CEC-clock-divider-on-HSM-rat.patch b/target/linux/bcm27xx/patches-5.10/950-0456-drm-vc4-hdmi-Update-the-CEC-clock-divider-on-HSM-rat.patch index 5da8a32528..667d283179 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0456-drm-vc4-hdmi-Update-the-CEC-clock-divider-on-HSM-rat.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0456-drm-vc4-hdmi-Update-the-CEC-clock-divider-on-HSM-rat.patch @@ -20,7 +20,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -802,6 +802,8 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -804,6 +804,8 @@ static void vc4_hdmi_encoder_pre_crtc_co vc4_hdmi_cec_update_clk_div(vc4_hdmi); diff --git a/target/linux/bcm27xx/patches-5.10/950-0457-drm-vc4-hdmi-Introduce-a-CEC-clock.patch b/target/linux/bcm27xx/patches-5.10/950-0457-drm-vc4-hdmi-Introduce-a-CEC-clock.patch index f20685c455..c08d52ad96 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0457-drm-vc4-hdmi-Introduce-a-CEC-clock.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0457-drm-vc4-hdmi-Introduce-a-CEC-clock.patch @@ -18,7 +18,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -151,7 +151,7 @@ static void vc4_hdmi_cec_update_clk_div( +@@ -153,7 +153,7 @@ static void vc4_hdmi_cec_update_clk_div( * Set the clock divider: the hsm_clock rate and this divider * setting will give a 40 kHz CEC clock. */ diff --git a/target/linux/bcm27xx/patches-5.10/950-0475-drm-vc4-Add-HDR-metadata-property-to-the-VC5-HDMI-co.patch b/target/linux/bcm27xx/patches-5.10/950-0475-drm-vc4-Add-HDR-metadata-property-to-the-VC5-HDMI-co.patch index 554fffc09e..3f12827405 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0475-drm-vc4-Add-HDR-metadata-property-to-the-VC5-HDMI-co.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0475-drm-vc4-Add-HDR-metadata-property-to-the-VC5-HDMI-co.patch @@ -15,7 +15,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -310,6 +310,10 @@ static int vc4_hdmi_connector_init(struc +@@ -312,6 +312,10 @@ static int vc4_hdmi_connector_init(struc connector->doublescan_allowed = 0; connector->stereo_allowed = 1; @@ -26,7 +26,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm_connector_attach_encoder(connector, encoder); return 0; -@@ -449,6 +453,25 @@ static void vc4_hdmi_set_audio_infoframe +@@ -451,6 +455,25 @@ static void vc4_hdmi_set_audio_infoframe vc4_hdmi_write_infoframe(encoder, &frame); } @@ -52,7 +52,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder) { struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); -@@ -461,6 +484,8 @@ static void vc4_hdmi_set_infoframes(stru +@@ -463,6 +486,8 @@ static void vc4_hdmi_set_infoframes(stru */ if (vc4_hdmi->audio.streaming) vc4_hdmi_set_audio_infoframe(encoder); diff --git a/target/linux/bcm27xx/patches-5.10/950-0476-drm-vc4-Add-connector-check-to-trigger-mode_change-w.patch b/target/linux/bcm27xx/patches-5.10/950-0476-drm-vc4-Add-connector-check-to-trigger-mode_change-w.patch index e7c85ee125..89a81f747a 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0476-drm-vc4-Add-connector-check-to-trigger-mode_change-w.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0476-drm-vc4-Add-connector-check-to-trigger-mode_change-w.patch @@ -11,7 +11,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -224,6 +224,45 @@ static int vc4_hdmi_connector_get_modes( +@@ -226,6 +226,45 @@ static int vc4_hdmi_connector_get_modes( return ret; } @@ -57,7 +57,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> static void vc4_hdmi_connector_reset(struct drm_connector *connector) { struct vc4_hdmi_connector_state *old_state = -@@ -273,6 +312,7 @@ static const struct drm_connector_funcs +@@ -275,6 +314,7 @@ static const struct drm_connector_funcs static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs = { .get_modes = vc4_hdmi_connector_get_modes, diff --git a/target/linux/bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch b/target/linux/bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch deleted file mode 100644 index 4f89ad56e5..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch +++ /dev/null @@ -1,32 +0,0 @@ -From d0df79e13ab947367b86d7861e34f85aa6aad020 Mon Sep 17 00:00:00 2001 -From: Dom Cobley <popcornmix@gmail.com> -Date: Sun, 24 Jan 2021 15:44:10 +0000 -Subject: [PATCH] vc4/drm: Avoid full hdmi audio fifo writes - -We are getting occasional VC4_HD_MAI_CTL_ERRORF in -HDMI_MAI_CTL which seem to correspond with audio dropouts. - -Reduce the threshold where we deassert DREQ to avoid the fifo overfilling - -Signed-off-by: Dom Cobley <popcornmix@gmail.com> ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1297,10 +1297,10 @@ static int vc4_hdmi_audio_prepare(struct - - /* Set the MAI threshold */ - HDMI_WRITE(HDMI_MAI_THR, -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) | -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) | -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) | -- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW)); -+ VC4_SET_FIELD(0x08, VC4_HD_MAI_THR_PANICHIGH) | -+ VC4_SET_FIELD(0x08, VC4_HD_MAI_THR_PANICLOW) | -+ VC4_SET_FIELD(0x06, VC4_HD_MAI_THR_DREQHIGH) | -+ VC4_SET_FIELD(0x08, VC4_HD_MAI_THR_DREQLOW)); - - HDMI_WRITE(HDMI_MAI_CONFIG, - VC4_HDMI_MAI_CONFIG_BIT_REVERSE | diff --git a/target/linux/bcm27xx/patches-5.10/950-0511-vc4-drm-Fix-source-offsets-with-DRM_FORMAT_P030.patch b/target/linux/bcm27xx/patches-5.10/950-0511-vc4-drm-Fix-source-offsets-with-DRM_FORMAT_P030.patch index b156c9072e..5d847bd87d 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0511-vc4-drm-Fix-source-offsets-with-DRM_FORMAT_P030.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0511-vc4-drm-Fix-source-offsets-with-DRM_FORMAT_P030.patch @@ -15,7 +15,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -824,9 +824,20 @@ static int vc4_plane_mode_set(struct drm +@@ -820,9 +820,20 @@ static int vc4_plane_mode_set(struct drm u32 tile_w, tile, x_off, pix_per_tile; if (fb->format->format == DRM_FORMAT_P030) { @@ -37,7 +37,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> } else { hvs_format = HVS_PIXEL_FORMAT_H264; -@@ -846,17 +857,16 @@ static int vc4_plane_mode_set(struct drm +@@ -842,17 +853,16 @@ static int vc4_plane_mode_set(struct drm default: break; } @@ -58,7 +58,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> /* Adjust the base pointer to the first pixel to be scanned * out. * -@@ -872,9 +882,7 @@ static int vc4_plane_mode_set(struct drm +@@ -868,9 +878,7 @@ static int vc4_plane_mode_set(struct drm vc4_state->offsets[i] += src_y / (i ? v_subsample : 1) * tile_w; diff --git a/target/linux/bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch b/target/linux/bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch deleted file mode 100644 index d9aa857856..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch +++ /dev/null @@ -1,62 +0,0 @@ -From aa5ba5fd06cffacf4831fe6e9aef65081287924e Mon Sep 17 00:00:00 2001 -From: Dom Cobley <popcornmix@gmail.com> -Date: Mon, 15 Mar 2021 13:28:06 +0000 -Subject: [PATCH] vc4/drm: vc4_plane: Remove subpixel positioning check - -There is little harm in ignoring fractional coordinates -(they just get truncated). - -Without this: -modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24 - -is rejected. We have the same issue in Kodi when trying to -use zoom options on video. - -Note: even if all coordinates are fully integer. e.g. -src:[0,0,1920,1080] dest:[-10,-10,1940,1100] - -it will still get rejected as drm_atomic_helper_check_plane_state -uses drm_rect_clip_scaled which transforms this to fractional src coords - -Signed-off-by: Dom Cobley <popcornmix@gmail.com> ---- - drivers/gpu/drm/vc4/vc4_plane.c | 21 ++++++++------------- - 1 file changed, 8 insertions(+), 13 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_plane.c -+++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -339,7 +339,6 @@ static int vc4_plane_setup_clipping_and_ - struct vc4_plane_state *vc4_state = to_vc4_plane_state(state); - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -- u32 subpixel_src_mask = (1 << 16) - 1; - int num_planes = fb->format->num_planes; - struct drm_crtc_state *crtc_state; - u32 h_subsample = fb->format->hsub; -@@ -361,18 +360,14 @@ static int vc4_plane_setup_clipping_and_ - for (i = 0; i < num_planes; i++) - vc4_state->offsets[i] = bo->paddr + fb->offsets[i]; - -- /* We don't support subpixel source positioning for scaling. */ -- if ((state->src.x1 & subpixel_src_mask) || -- (state->src.x2 & subpixel_src_mask) || -- (state->src.y1 & subpixel_src_mask) || -- (state->src.y2 & subpixel_src_mask)) { -- return -EINVAL; -- } -- -- vc4_state->src_x = state->src.x1 >> 16; -- vc4_state->src_y = state->src.y1 >> 16; -- vc4_state->src_w[0] = (state->src.x2 - state->src.x1) >> 16; -- vc4_state->src_h[0] = (state->src.y2 - state->src.y1) >> 16; -+ /* We don't support subpixel source positioning for scaling, -+ * but fractional coordinates can be generated by clipping -+ * so just round for now -+ */ -+ vc4_state->src_x = DIV_ROUND_CLOSEST(state->src.x1, 1<<16); -+ vc4_state->src_y = DIV_ROUND_CLOSEST(state->src.y1, 1<<16); -+ vc4_state->src_w[0] = DIV_ROUND_CLOSEST(state->src.x2, 1<<16) - vc4_state->src_x; -+ vc4_state->src_h[0] = DIV_ROUND_CLOSEST(state->src.y2, 1<<16) - vc4_state->src_y; - - vc4_state->crtc_x = state->dst.x1; - vc4_state->crtc_y = state->dst.y1; diff --git a/target/linux/bcm27xx/patches-5.10/950-0522-vc4-drm-SQUASH-Fix-source-offsets-with-DRM_FORMAT_P0.patch b/target/linux/bcm27xx/patches-5.10/950-0522-vc4-drm-SQUASH-Fix-source-offsets-with-DRM_FORMAT_P0.patch index 711b2e5f17..83737337c2 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0522-vc4-drm-SQUASH-Fix-source-offsets-with-DRM_FORMAT_P0.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0522-vc4-drm-SQUASH-Fix-source-offsets-with-DRM_FORMAT_P0.patch @@ -16,7 +16,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -825,8 +825,9 @@ static int vc4_plane_mode_set(struct drm +@@ -826,8 +826,9 @@ static int vc4_plane_mode_set(struct drm * and bits[3:0] should be between 0 and 11, indicating which * of the 12-pixels in that 128-bit word is the first pixel to be used */ diff --git a/target/linux/bcm27xx/patches-5.10/950-0529-drm-vc4-Use-the-new-helpers.patch b/target/linux/bcm27xx/patches-5.10/950-0529-drm-vc4-Use-the-new-helpers.patch index db7e7a56ab..0a6d873f4f 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0529-drm-vc4-Use-the-new-helpers.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0529-drm-vc4-Use-the-new-helpers.patch @@ -12,7 +12,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -224,21 +224,6 @@ static int vc4_hdmi_connector_get_modes( +@@ -226,21 +226,6 @@ static int vc4_hdmi_connector_get_modes( return ret; } @@ -34,7 +34,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector, struct drm_atomic_state *state) { -@@ -247,12 +232,13 @@ static int vc4_hdmi_connector_atomic_che +@@ -249,12 +234,13 @@ static int vc4_hdmi_connector_atomic_che struct drm_connector_state *new_state = drm_atomic_get_new_connector_state(state, connector); struct drm_crtc *crtc = new_state->crtc; @@ -50,7 +50,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> crtc_state = drm_atomic_get_crtc_state(state, crtc); if (IS_ERR(crtc_state)) return PTR_ERR(crtc_state); -@@ -351,8 +337,7 @@ static int vc4_hdmi_connector_init(struc +@@ -353,8 +339,7 @@ static int vc4_hdmi_connector_init(struc connector->stereo_allowed = 1; if (vc4_hdmi->variant->supports_hdr) diff --git a/target/linux/bcm27xx/patches-5.10/950-0531-drm-vc4-hdmi-Signal-the-proper-colorimetry-info-in-t.patch b/target/linux/bcm27xx/patches-5.10/950-0531-drm-vc4-hdmi-Signal-the-proper-colorimetry-info-in-t.patch index 3c346a2b8f..c569b0e9a2 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0531-drm-vc4-hdmi-Signal-the-proper-colorimetry-info-in-t.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0531-drm-vc4-hdmi-Signal-the-proper-colorimetry-info-in-t.patch @@ -17,7 +17,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -236,7 +236,8 @@ static int vc4_hdmi_connector_atomic_che +@@ -238,7 +238,8 @@ static int vc4_hdmi_connector_atomic_che if (!crtc) return 0; @@ -27,7 +27,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct drm_crtc_state *crtc_state; crtc_state = drm_atomic_get_crtc_state(state, crtc); -@@ -326,6 +327,11 @@ static int vc4_hdmi_connector_init(struc +@@ -328,6 +329,11 @@ static int vc4_hdmi_connector_init(struc if (ret) return ret; @@ -39,7 +39,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> drm_connector_attach_tv_margin_properties(connector); drm_connector_attach_max_bpc_property(connector, 8, 12); -@@ -440,7 +446,7 @@ static void vc4_hdmi_set_avi_infoframe(s +@@ -442,7 +448,7 @@ static void vc4_hdmi_set_avi_infoframe(s vc4_encoder->limited_rgb_range ? HDMI_QUANTIZATION_RANGE_LIMITED : HDMI_QUANTIZATION_RANGE_FULL); diff --git a/target/linux/bcm27xx/patches-5.10/950-0533-vc4-kms-vc4_plane-Support-2020-colourspace-for-yuv-p.patch b/target/linux/bcm27xx/patches-5.10/950-0533-vc4-kms-vc4_plane-Support-2020-colourspace-for-yuv-p.patch index 85bccb24be..2cbe3841ef 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0533-vc4-kms-vc4_plane-Support-2020-colourspace-for-yuv-p.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0533-vc4-kms-vc4_plane-Support-2020-colourspace-for-yuv-p.patch @@ -19,7 +19,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -644,10 +644,10 @@ static const u32 colorspace_coeffs[2][DR +@@ -645,10 +645,10 @@ static const u32 colorspace_coeffs[2][DR SCALER_CSC1_ITR_R_709_3, SCALER_CSC2_ITR_R_709_3, }, { @@ -34,7 +34,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> } }, { /* Full range */ -@@ -662,10 +662,10 @@ static const u32 colorspace_coeffs[2][DR +@@ -663,10 +663,10 @@ static const u32 colorspace_coeffs[2][DR SCALER_CSC1_ITR_R_709_3_FR, SCALER_CSC2_ITR_R_709_3_FR, }, { @@ -49,7 +49,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> } } }; -@@ -1487,7 +1487,8 @@ struct drm_plane *vc4_plane_init(struct +@@ -1488,7 +1488,8 @@ struct drm_plane *vc4_plane_init(struct drm_plane_create_color_properties(plane, BIT(DRM_COLOR_YCBCR_BT601) | diff --git a/target/linux/bcm27xx/patches-5.10/950-0538-drm-vc4-hdmi-Convert-to-the-new-clock-request-API.patch b/target/linux/bcm27xx/patches-5.10/950-0538-drm-vc4-hdmi-Convert-to-the-new-clock-request-API.patch index 7208b02835..2b1da48f8b 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0538-drm-vc4-hdmi-Convert-to-the-new-clock-request-API.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0538-drm-vc4-hdmi-Convert-to-the-new-clock-request-API.patch @@ -15,7 +15,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -546,6 +546,9 @@ static void vc4_hdmi_encoder_post_crtc_p +@@ -548,6 +548,9 @@ static void vc4_hdmi_encoder_post_crtc_p HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE); clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock); @@ -25,7 +25,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> clk_disable_unprepare(vc4_hdmi->pixel_clock); ret = pm_runtime_put(&vc4_hdmi->pdev->dev); -@@ -850,9 +853,9 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -852,9 +855,9 @@ static void vc4_hdmi_encoder_pre_crtc_co * pixel clock, but HSM ends up being the limiting factor. */ hsm_rate = max_t(unsigned long, 120000000, (pixel_rate / 100) * 101); @@ -38,7 +38,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -864,10 +867,12 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -866,10 +869,12 @@ static void vc4_hdmi_encoder_pre_crtc_co * FIXME: When the pixel freq is 594MHz (4k60), this needs to be setup * at 300MHz. */ @@ -55,7 +55,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> clk_disable_unprepare(vc4_hdmi->pixel_clock); return; } -@@ -875,6 +880,9 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -877,6 +882,9 @@ static void vc4_hdmi_encoder_pre_crtc_co ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock); if (ret) { DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret); diff --git a/target/linux/bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch b/target/linux/bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch deleted file mode 100644 index 29286bc654..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch +++ /dev/null @@ -1,66 +0,0 @@ -From f9211d36925dac42f910d7d2e4c370e414fd24d2 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime@cerno.tech> -Date: Thu, 3 Dec 2020 14:25:36 +0100 -Subject: [PATCH] drm/vc4: drv: Remove the DSI pointer in vc4_drv - -Commit 51f4fcd9c4ea867c3b4fe58111f342ad0e80642a upstream. - -That pointer isn't used anywhere, so there's no point in keeping it. - -Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> -Signed-off-by: Maxime Ripard <maxime@cerno.tech> -Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-2-maxime@cerno.tech ---- - drivers/gpu/drm/vc4/vc4_drv.h | 1 - - drivers/gpu/drm/vc4/vc4_dsi.c | 9 --------- - 2 files changed, 10 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -81,7 +81,6 @@ struct vc4_dev { - struct vc4_hvs *hvs; - struct vc4_v3d *v3d; - struct vc4_dpi *dpi; -- struct vc4_dsi *dsi1; - struct vc4_vec *vec; - struct vc4_txp *txp; - struct vc4_fkms *fkms; ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -1451,7 +1451,6 @@ static int vc4_dsi_bind(struct device *d - { - struct platform_device *pdev = to_platform_device(dev); - struct drm_device *drm = dev_get_drvdata(master); -- struct vc4_dev *vc4 = to_vc4_dev(drm); - struct vc4_dsi *dsi = dev_get_drvdata(dev); - struct vc4_dsi_encoder *vc4_dsi_encoder; - struct drm_panel *panel; -@@ -1604,9 +1603,6 @@ static int vc4_dsi_bind(struct device *d - if (ret) - return ret; - -- if (dsi->port == 1) -- vc4->dsi1 = dsi; -- - drm_simple_encoder_init(drm, dsi->encoder, DRM_MODE_ENCODER_DSI); - drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs); - -@@ -1635,8 +1631,6 @@ static int vc4_dsi_bind(struct device *d - static void vc4_dsi_unbind(struct device *dev, struct device *master, - void *data) - { -- struct drm_device *drm = dev_get_drvdata(master); -- struct vc4_dev *vc4 = to_vc4_dev(drm); - struct vc4_dsi *dsi = dev_get_drvdata(dev); - - if (dsi->bridge) -@@ -1648,9 +1642,6 @@ static void vc4_dsi_unbind(struct device - */ - list_splice_init(&dsi->bridge_chain, &dsi->encoder->bridge_chain); - drm_encoder_cleanup(dsi->encoder); -- -- if (dsi->port == 1) -- vc4->dsi1 = NULL; - } - - static const struct component_ops vc4_dsi_ops = { diff --git a/target/linux/bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch b/target/linux/bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch deleted file mode 100644 index b1b0fb5e4e..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 7fe646b726b66c16f731e36e95d7eda9f182ba4d Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime@cerno.tech> -Date: Thu, 3 Dec 2020 14:25:38 +0100 -Subject: [PATCH] drm/vc4: dsi: Use snprintf for the PHY clocks instead - of an array - -Commit dc0bf36401e891c853e0a25baeb4e0b4e6f3626d upstream. - -The DSI clocks setup function has been using an array to store the clock -name of either the DSI0 or DSI1 blocks, using the port ID to choose the -proper one. - -Let's switch to an snprintf call to do the same thing and simplify the -array a bit. - -Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> -Signed-off-by: Maxime Ripard <maxime@cerno.tech> -Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-4-maxime@cerno.tech ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -1390,12 +1390,12 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi * - struct device *dev = &dsi->pdev->dev; - const char *parent_name = __clk_get_name(dsi->pll_phy_clock); - static const struct { -- const char *dsi0_name, *dsi1_name; -+ const char *name; - int div; - } phy_clocks[] = { -- { "dsi0_byte", "dsi1_byte", 8 }, -- { "dsi0_ddr2", "dsi1_ddr2", 4 }, -- { "dsi0_ddr", "dsi1_ddr", 2 }, -+ { "byte", 8 }, -+ { "ddr2", 4 }, -+ { "ddr", 2 }, - }; - int i; - -@@ -1411,8 +1411,12 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi * - for (i = 0; i < ARRAY_SIZE(phy_clocks); i++) { - struct clk_fixed_factor *fix = &dsi->phy_clocks[i]; - struct clk_init_data init; -+ char clk_name[16]; - int ret; - -+ snprintf(clk_name, sizeof(clk_name), -+ "dsi%u_%s", dsi->port, phy_clocks[i].name); -+ - /* We just use core fixed factor clock ops for the PHY - * clocks. The clocks are actually gated by the - * PHY_AFEC0_DDRCLK_EN bits, which we should be -@@ -1429,10 +1433,7 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi * - memset(&init, 0, sizeof(init)); - init.parent_names = &parent_name; - init.num_parents = 1; -- if (dsi->port == 1) -- init.name = phy_clocks[i].dsi1_name; -- else -- init.name = phy_clocks[i].dsi0_name; -+ init.name = clk_name; - init.ops = &clk_fixed_factor_ops; - - ret = devm_clk_hw_register(dev, &fix->hw); diff --git a/target/linux/bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch b/target/linux/bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch deleted file mode 100644 index 4e7671ace1..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch +++ /dev/null @@ -1,191 +0,0 @@ -From 4dd1101f3e16e6202132ae34a8da2a7d78043d56 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime@cerno.tech> -Date: Thu, 3 Dec 2020 14:25:39 +0100 -Subject: [PATCH] drm/vc4: dsi: Introduce a variant structure - -Commit d1d195ce26a14ec0a87816c09ae514e1c40e97f7 upstream. - -Most of the differences between DSI0 and DSI1 are handled through the -ID. However, the BCM2711 DSI is going to introduce one more variable to -the mix and will break some expectations of the earlier, simpler, test. - -Let's add a variant structure that will address most of the differences -between those three controllers. - -Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> -Signed-off-by: Maxime Ripard <maxime@cerno.tech> -Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-5-maxime@cerno.tech ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 63 ++++++++++++++++++++--------------- - 1 file changed, 37 insertions(+), 26 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -493,6 +493,18 @@ - */ - #define DSI1_ID 0x8c - -+struct vc4_dsi_variant { -+ /* Whether we're on bcm2835's DSI0 or DSI1. */ -+ unsigned int port; -+ -+ bool broken_axi_workaround; -+ -+ const char *debugfs_name; -+ const struct debugfs_reg32 *regs; -+ size_t nregs; -+ -+}; -+ - /* General DSI hardware state. */ - struct vc4_dsi { - struct platform_device *pdev; -@@ -509,8 +521,7 @@ struct vc4_dsi { - u32 *reg_dma_mem; - dma_addr_t reg_paddr; - -- /* Whether we're on bcm2835's DSI0 or DSI1. */ -- int port; -+ const struct vc4_dsi_variant *variant; - - /* DSI channel for the panel we're connected to. */ - u32 channel; -@@ -586,10 +597,10 @@ dsi_dma_workaround_write(struct vc4_dsi - #define DSI_READ(offset) readl(dsi->regs + (offset)) - #define DSI_WRITE(offset, val) dsi_dma_workaround_write(dsi, offset, val) - #define DSI_PORT_READ(offset) \ -- DSI_READ(dsi->port ? DSI1_##offset : DSI0_##offset) -+ DSI_READ(dsi->variant->port ? DSI1_##offset : DSI0_##offset) - #define DSI_PORT_WRITE(offset, val) \ -- DSI_WRITE(dsi->port ? DSI1_##offset : DSI0_##offset, val) --#define DSI_PORT_BIT(bit) (dsi->port ? DSI1_##bit : DSI0_##bit) -+ DSI_WRITE(dsi->variant->port ? DSI1_##offset : DSI0_##offset, val) -+#define DSI_PORT_BIT(bit) (dsi->variant->port ? DSI1_##bit : DSI0_##bit) - - /* VC4 DSI encoder KMS struct */ - struct vc4_dsi_encoder { -@@ -837,7 +848,7 @@ static void vc4_dsi_encoder_enable(struc - - ret = pm_runtime_resume_and_get(dev); - if (ret) { -- DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->port); -+ DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->variant->port); - return; - } - -@@ -871,7 +882,7 @@ static void vc4_dsi_encoder_enable(struc - DSI_PORT_WRITE(STAT, DSI_PORT_READ(STAT)); - - /* Set AFE CTR00/CTR1 to release powerdown of analog. */ -- if (dsi->port == 0) { -+ if (dsi->variant->port == 0) { - u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) | - VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ)); - -@@ -1017,7 +1028,7 @@ static void vc4_dsi_encoder_enable(struc - DSI_PORT_BIT(PHYC_CLANE_ENABLE) | - ((dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? - 0 : DSI_PORT_BIT(PHYC_HS_CLK_CONTINUOUS)) | -- (dsi->port == 0 ? -+ (dsi->variant->port == 0 ? - VC4_SET_FIELD(lpx - 1, DSI0_PHYC_ESC_CLK_LPDT) : - VC4_SET_FIELD(lpx - 1, DSI1_PHYC_ESC_CLK_LPDT))); - -@@ -1043,13 +1054,13 @@ static void vc4_dsi_encoder_enable(struc - DSI_DISP1_ENABLE); - - /* Ungate the block. */ -- if (dsi->port == 0) -+ if (dsi->variant->port == 0) - DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI0_CTRL_CTRL0); - else - DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN); - - /* Bring AFE out of reset. */ -- if (dsi->port == 0) { -+ if (dsi->variant->port == 0) { - } else { - DSI_PORT_WRITE(PHY_AFEC0, - DSI_PORT_READ(PHY_AFEC0) & -@@ -1305,8 +1316,16 @@ static const struct drm_encoder_helper_f - .mode_fixup = vc4_dsi_encoder_mode_fixup, - }; - -+static const struct vc4_dsi_variant bcm2835_dsi1_variant = { -+ .port = 1, -+ .broken_axi_workaround = true, -+ .debugfs_name = "dsi1_regs", -+ .regs = dsi1_regs, -+ .nregs = ARRAY_SIZE(dsi1_regs), -+}; -+ - static const struct of_device_id vc4_dsi_dt_match[] = { -- { .compatible = "brcm,bcm2835-dsi1", (void *)(uintptr_t)1 }, -+ { .compatible = "brcm,bcm2835-dsi1", &bcm2835_dsi1_variant }, - {} - }; - -@@ -1317,7 +1336,7 @@ static void dsi_handle_error(struct vc4_ - if (!(stat & bit)) - return; - -- DRM_ERROR("DSI%d: %s error\n", dsi->port, type); -+ DRM_ERROR("DSI%d: %s error\n", dsi->variant->port, type); - *ret = IRQ_HANDLED; - } - -@@ -1415,7 +1434,7 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi * - int ret; - - snprintf(clk_name, sizeof(clk_name), -- "dsi%u_%s", dsi->port, phy_clocks[i].name); -+ "dsi%u_%s", dsi->variant->port, phy_clocks[i].name); - - /* We just use core fixed factor clock ops for the PHY - * clocks. The clocks are actually gated by the -@@ -1463,7 +1482,7 @@ static int vc4_dsi_bind(struct device *d - if (!match) - return -ENODEV; - -- dsi->port = (uintptr_t)match->data; -+ dsi->variant = match->data; - - vc4_dsi_encoder = devm_kzalloc(dev, sizeof(*vc4_dsi_encoder), - GFP_KERNEL); -@@ -1480,13 +1499,8 @@ static int vc4_dsi_bind(struct device *d - return PTR_ERR(dsi->regs); - - dsi->regset.base = dsi->regs; -- if (dsi->port == 0) { -- dsi->regset.regs = dsi0_regs; -- dsi->regset.nregs = ARRAY_SIZE(dsi0_regs); -- } else { -- dsi->regset.regs = dsi1_regs; -- dsi->regset.nregs = ARRAY_SIZE(dsi1_regs); -- } -+ dsi->regset.regs = dsi->variant->regs; -+ dsi->regset.nregs = dsi->variant->nregs; - - if (DSI_PORT_READ(ID) != DSI_ID_VALUE) { - dev_err(dev, "Port returned 0x%08x for ID instead of 0x%08x\n", -@@ -1498,7 +1512,7 @@ static int vc4_dsi_bind(struct device *d - * from the ARM. It does handle writes from the DMA engine, - * so set up a channel for talking to it. - */ -- if (dsi->port == 1) { -+ if (dsi->variant->broken_axi_workaround) { - dsi->reg_dma_mem = dma_alloc_coherent(dev, 4, - &dsi->reg_dma_paddr, - GFP_KERNEL); -@@ -1619,10 +1633,7 @@ static int vc4_dsi_bind(struct device *d - */ - list_splice_init(&dsi->encoder->bridge_chain, &dsi->bridge_chain); - -- if (dsi->port == 0) -- vc4_debugfs_add_regset32(drm, "dsi0_regs", &dsi->regset); -- else -- vc4_debugfs_add_regset32(drm, "dsi1_regs", &dsi->regset); -+ vc4_debugfs_add_regset32(drm, dsi->variant->debugfs_name, &dsi->regset); - - pm_runtime_enable(dev); - diff --git a/target/linux/bcm27xx/patches-5.10/950-0563-drm-vc4-dsi-Add-support-for-DSI0.patch b/target/linux/bcm27xx/patches-5.10/950-0563-drm-vc4-dsi-Add-support-for-DSI0.patch index 57b37de100..41338b5580 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0563-drm-vc4-dsi-Add-support-for-DSI0.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0563-drm-vc4-dsi-Add-support-for-DSI0.patch @@ -20,7 +20,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-6-maxi --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -1316,6 +1316,13 @@ static const struct drm_encoder_helper_f +@@ -1374,6 +1374,13 @@ static const struct drm_encoder_helper_f .mode_fixup = vc4_dsi_encoder_mode_fixup, }; @@ -34,7 +34,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-6-maxi static const struct vc4_dsi_variant bcm2835_dsi1_variant = { .port = 1, .broken_axi_workaround = true, -@@ -1325,6 +1332,7 @@ static const struct vc4_dsi_variant bcm2 +@@ -1383,6 +1390,7 @@ static const struct vc4_dsi_variant bcm2 }; static const struct of_device_id vc4_dsi_dt_match[] = { diff --git a/target/linux/bcm27xx/patches-5.10/950-0564-drm-vc4-dsi-Add-configuration-for-BCM2711-DSI1.patch b/target/linux/bcm27xx/patches-5.10/950-0564-drm-vc4-dsi-Add-configuration-for-BCM2711-DSI1.patch index 14749219b0..06415ac850 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0564-drm-vc4-dsi-Add-configuration-for-BCM2711-DSI1.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0564-drm-vc4-dsi-Add-configuration-for-BCM2711-DSI1.patch @@ -18,7 +18,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-8-maxi --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -1316,6 +1316,13 @@ static const struct drm_encoder_helper_f +@@ -1374,6 +1374,13 @@ static const struct drm_encoder_helper_f .mode_fixup = vc4_dsi_encoder_mode_fixup, }; @@ -32,7 +32,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-8-maxi static const struct vc4_dsi_variant bcm2835_dsi0_variant = { .port = 0, .debugfs_name = "dsi0_regs", -@@ -1332,6 +1339,7 @@ static const struct vc4_dsi_variant bcm2 +@@ -1390,6 +1397,7 @@ static const struct vc4_dsi_variant bcm2 }; static const struct of_device_id vc4_dsi_dt_match[] = { @@ -40,7 +40,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-8-maxi { .compatible = "brcm,bcm2835-dsi0", &bcm2835_dsi0_variant }, { .compatible = "brcm,bcm2835-dsi1", &bcm2835_dsi1_variant }, {} -@@ -1516,8 +1524,8 @@ static int vc4_dsi_bind(struct device *d +@@ -1577,8 +1585,8 @@ static int vc4_dsi_bind(struct device *d return -ENODEV; } diff --git a/target/linux/bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch b/target/linux/bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch deleted file mode 100644 index a94405150a..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 59938610a705283fef63447c7e777781358610e2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.com> -Date: Thu, 11 Feb 2021 18:37:04 +0000 -Subject: [PATCH] drm/vc4: Correct pixel order for DSI0 - -For slightly unknown reasons, dsi0 takes a different pixel format -to dsi1, and that has to be set in the pixel valve. - -Amend the setup accordingly. - -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -319,7 +319,8 @@ static void vc4_crtc_config_pv(struct dr - u32 pixel_rep = (mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1; - bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 || - vc4_encoder->type == VC4_ENCODER_TYPE_DSI1); -- u32 format = is_dsi ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24; -+ bool is_dsi1 = vc4_encoder->type == VC4_ENCODER_TYPE_DSI1; -+ u32 format = is_dsi1 ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24; - u8 ppc = pv_data->pixels_per_clock; - bool debug_dump_regs = false; - diff --git a/target/linux/bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch b/target/linux/bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch deleted file mode 100644 index 30bf65e3f2..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch +++ /dev/null @@ -1,29 +0,0 @@ -From b627cebfc64dd944b9571203e30456efbc0101c3 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.com> -Date: Mon, 8 Feb 2021 11:22:01 +0000 -Subject: [PATCH] drm/vc4: Register dsi0 as the correct vc4 encoder - type - -vc4_dsi was registering both dsi0 and dsi1 as VC4_ENCODER_TYPE_DSI1 -which seemed to work OK for a single DSI display, but fails -if there are two DSI displays connected. - -Update to register the correct type. - -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -1506,7 +1506,8 @@ static int vc4_dsi_bind(struct device *d - return -ENOMEM; - - INIT_LIST_HEAD(&dsi->bridge_chain); -- vc4_dsi_encoder->base.type = VC4_ENCODER_TYPE_DSI1; -+ vc4_dsi_encoder->base.type = dsi->variant->port ? -+ VC4_ENCODER_TYPE_DSI1 : VC4_ENCODER_TYPE_DSI0; - vc4_dsi_encoder->dsi = dsi; - dsi->encoder = &vc4_dsi_encoder->base.base; - diff --git a/target/linux/bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch b/target/linux/bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch deleted file mode 100644 index e9a08d2901..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch +++ /dev/null @@ -1,188 +0,0 @@ -From 1ad48331b7697e4fbc9f4bd376fc2db342045cb6 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.com> -Date: Wed, 10 Feb 2021 18:46:22 +0000 -Subject: [PATCH] drm/vc4: Fix dsi0 interrupt support. - -DSI0 seemingly had very little or no testing as a load of -the register mappings were incorrect/missing, so host -transfers always timed out due to enabling/checking incorrect -bits in the interrupt enable and status registers. - -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 111 ++++++++++++++++++++++++++-------- - 1 file changed, 85 insertions(+), 26 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -181,8 +181,50 @@ - - #define DSI0_TXPKT_PIX_FIFO 0x20 /* AKA PIX_FIFO */ - --#define DSI0_INT_STAT 0x24 --#define DSI0_INT_EN 0x28 -+#define DSI0_INT_STAT 0x24 -+#define DSI0_INT_EN 0x28 -+# define DSI0_INT_FIFO_ERR BIT(25) -+# define DSI0_INT_CMDC_DONE_MASK VC4_MASK(24, 23) -+# define DSI0_INT_CMDC_DONE_SHIFT 23 -+# define DSI0_INT_CMDC_DONE_NO_REPEAT 1 -+# define DSI0_INT_CMDC_DONE_REPEAT 3 -+# define DSI0_INT_PHY_DIR_RTF BIT(22) -+# define DSI0_INT_PHY_D1_ULPS BIT(21) -+# define DSI0_INT_PHY_D1_STOP BIT(20) -+# define DSI0_INT_PHY_RXLPDT BIT(19) -+# define DSI0_INT_PHY_RXTRIG BIT(18) -+# define DSI0_INT_PHY_D0_ULPS BIT(17) -+# define DSI0_INT_PHY_D0_LPDT BIT(16) -+# define DSI0_INT_PHY_D0_FTR BIT(15) -+# define DSI0_INT_PHY_D0_STOP BIT(14) -+/* Signaled when the clock lane enters the given state. */ -+# define DSI0_INT_PHY_CLK_ULPS BIT(13) -+# define DSI0_INT_PHY_CLK_HS BIT(12) -+# define DSI0_INT_PHY_CLK_FTR BIT(11) -+/* Signaled on timeouts */ -+# define DSI0_INT_PR_TO BIT(10) -+# define DSI0_INT_TA_TO BIT(9) -+# define DSI0_INT_LPRX_TO BIT(8) -+# define DSI0_INT_HSTX_TO BIT(7) -+/* Contention on a line when trying to drive the line low */ -+# define DSI0_INT_ERR_CONT_LP1 BIT(6) -+# define DSI0_INT_ERR_CONT_LP0 BIT(5) -+/* Control error: incorrect line state sequence on data lane 0. */ -+# define DSI0_INT_ERR_CONTROL BIT(4) -+# define DSI0_INT_ERR_SYNC_ESC BIT(3) -+# define DSI0_INT_RX2_PKT BIT(2) -+# define DSI0_INT_RX1_PKT BIT(1) -+# define DSI0_INT_CMD_PKT BIT(0) -+ -+#define DSI0_INTERRUPTS_ALWAYS_ENABLED (DSI0_INT_ERR_SYNC_ESC | \ -+ DSI0_INT_ERR_CONTROL | \ -+ DSI0_INT_ERR_CONT_LP0 | \ -+ DSI0_INT_ERR_CONT_LP1 | \ -+ DSI0_INT_HSTX_TO | \ -+ DSI0_INT_LPRX_TO | \ -+ DSI0_INT_TA_TO | \ -+ DSI0_INT_PR_TO) -+ - # define DSI1_INT_PHY_D3_ULPS BIT(30) - # define DSI1_INT_PHY_D3_STOP BIT(29) - # define DSI1_INT_PHY_D2_ULPS BIT(28) -@@ -894,6 +936,9 @@ static void vc4_dsi_encoder_enable(struc - - DSI_PORT_WRITE(PHY_AFEC0, afec0); - -+ /* AFEC reset hold time */ -+ mdelay(1); -+ - DSI_PORT_WRITE(PHY_AFEC1, - VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE1) | - VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE0) | -@@ -1060,12 +1105,9 @@ static void vc4_dsi_encoder_enable(struc - DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN); - - /* Bring AFE out of reset. */ -- if (dsi->variant->port == 0) { -- } else { -- DSI_PORT_WRITE(PHY_AFEC0, -- DSI_PORT_READ(PHY_AFEC0) & -- ~DSI1_PHY_AFEC0_RESET); -- } -+ DSI_PORT_WRITE(PHY_AFEC0, -+ DSI_PORT_READ(PHY_AFEC0) & -+ ~DSI_PORT_BIT(PHY_AFEC0_RESET)); - - vc4_dsi_ulps(dsi, false); - -@@ -1184,13 +1226,28 @@ static ssize_t vc4_dsi_host_transfer(str - /* Enable the appropriate interrupt for the transfer completion. */ - dsi->xfer_result = 0; - reinit_completion(&dsi->xfer_completion); -- DSI_PORT_WRITE(INT_STAT, DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF); -- if (msg->rx_len) { -- DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | -- DSI1_INT_PHY_DIR_RTF)); -+ if (dsi->variant->port == 0) { -+ DSI_PORT_WRITE(INT_STAT, -+ DSI0_INT_CMDC_DONE_MASK | DSI1_INT_PHY_DIR_RTF); -+ if (msg->rx_len) { -+ DSI_PORT_WRITE(INT_EN, (DSI0_INTERRUPTS_ALWAYS_ENABLED | -+ DSI0_INT_PHY_DIR_RTF)); -+ } else { -+ DSI_PORT_WRITE(INT_EN, -+ (DSI0_INTERRUPTS_ALWAYS_ENABLED | -+ VC4_SET_FIELD(DSI0_INT_CMDC_DONE_NO_REPEAT, -+ DSI0_INT_CMDC_DONE))); -+ } - } else { -- DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | -- DSI1_INT_TXPKT1_DONE)); -+ DSI_PORT_WRITE(INT_STAT, -+ DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF); -+ if (msg->rx_len) { -+ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | -+ DSI1_INT_PHY_DIR_RTF)); -+ } else { -+ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | -+ DSI1_INT_TXPKT1_DONE)); -+ } - } - - /* Send the packet. */ -@@ -1207,7 +1264,7 @@ static ssize_t vc4_dsi_host_transfer(str - ret = dsi->xfer_result; - } - -- DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); -+ DSI_PORT_WRITE(INT_EN, DSI_PORT_BIT(INTERRUPTS_ALWAYS_ENABLED)); - - if (ret) - goto reset_fifo_and_return; -@@ -1253,7 +1310,7 @@ reset_fifo_and_return: - DSI_PORT_BIT(CTRL_RESET_FIFOS)); - - DSI_PORT_WRITE(TXPKT1C, 0); -- DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); -+ DSI_PORT_WRITE(INT_EN, DSI_PORT_BIT(INTERRUPTS_ALWAYS_ENABLED)); - return ret; - } - -@@ -1386,26 +1443,28 @@ static irqreturn_t vc4_dsi_irq_handler(i - DSI_PORT_WRITE(INT_STAT, stat); - - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_ERR_SYNC_ESC, "LPDT sync"); -+ DSI_PORT_BIT(INT_ERR_SYNC_ESC), "LPDT sync"); - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_ERR_CONTROL, "data lane 0 sequence"); -+ DSI_PORT_BIT(INT_ERR_CONTROL), "data lane 0 sequence"); - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_ERR_CONT_LP0, "LP0 contention"); -+ DSI_PORT_BIT(INT_ERR_CONT_LP0), "LP0 contention"); - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_ERR_CONT_LP1, "LP1 contention"); -+ DSI_PORT_BIT(INT_ERR_CONT_LP1), "LP1 contention"); - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_HSTX_TO, "HSTX timeout"); -+ DSI_PORT_BIT(INT_HSTX_TO), "HSTX timeout"); - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_LPRX_TO, "LPRX timeout"); -+ DSI_PORT_BIT(INT_LPRX_TO), "LPRX timeout"); - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_TA_TO, "turnaround timeout"); -+ DSI_PORT_BIT(INT_TA_TO), "turnaround timeout"); - dsi_handle_error(dsi, &ret, stat, -- DSI1_INT_PR_TO, "peripheral reset timeout"); -+ DSI_PORT_BIT(INT_PR_TO), "peripheral reset timeout"); - -- if (stat & (DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF)) { -+ if (stat & ((dsi->variant->port ? DSI1_INT_TXPKT1_DONE : -+ DSI0_INT_CMDC_DONE_MASK) | -+ DSI_PORT_BIT(INT_PHY_DIR_RTF))) { - complete(&dsi->xfer_completion); - ret = IRQ_HANDLED; -- } else if (stat & DSI1_INT_HSTX_TO) { -+ } else if (stat & DSI_PORT_BIT(INT_HSTX_TO)) { - complete(&dsi->xfer_completion); - dsi->xfer_result = -ETIMEDOUT; - ret = IRQ_HANDLED; diff --git a/target/linux/bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch b/target/linux/bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch deleted file mode 100644 index c6786890ba..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 709279f0925b7e17f64684a8cab44e1cb72ae56e Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.com> -Date: Thu, 15 Apr 2021 16:18:16 +0100 -Subject: [PATCH] drm/vc4: Add correct stop condition to - vc4_dsi_encoder_disable iteration - -vc4_dsi_encoder_disable is partially an open coded version of -drm_bridge_chain_disable, but it missed a termination condition -in the loop for ->disable which meant that no post_disable -calls were made. - -Add in the termination clause. - -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -803,6 +803,9 @@ static void vc4_dsi_encoder_disable(stru - list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { - if (iter->funcs->disable) - iter->funcs->disable(iter); -+ -+ if (iter == dsi->bridge) -+ break; - } - - vc4_dsi_ulps(dsi, true); diff --git a/target/linux/bcm27xx/patches-5.10/950-0574-drm-vc4-hdmi-Properly-compute-the-BVB-clock-rate.patch b/target/linux/bcm27xx/patches-5.10/950-0574-drm-vc4-hdmi-Properly-compute-the-BVB-clock-rate.patch index d816abfecd..ca9bfb51c0 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0574-drm-vc4-hdmi-Properly-compute-the-BVB-clock-rate.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0574-drm-vc4-hdmi-Properly-compute-the-BVB-clock-rate.patch @@ -21,9 +21,9 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> #define CEC_CLOCK_FREQ 40000 -#define VC4_HSM_MID_CLOCK 149985000 - static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused) - { -@@ -814,7 +813,7 @@ static void vc4_hdmi_encoder_pre_crtc_co + #define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000) + +@@ -816,7 +815,7 @@ static void vc4_hdmi_encoder_pre_crtc_co conn_state_to_vc4_hdmi_conn_state(conn_state); struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); @@ -32,7 +32,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> int ret; ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev); -@@ -863,12 +862,14 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -865,12 +864,14 @@ static void vc4_hdmi_encoder_pre_crtc_co vc4_hdmi_cec_update_clk_div(vc4_hdmi); diff --git a/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch b/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch index d4efa11c40..557f9db3b9 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0575-drm-vc4-hdmi-Enable-the-scrambler.patch @@ -32,7 +32,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> #define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_SHIFT 8 #define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_MASK VC4_MASK(10, 8) -@@ -518,6 +521,64 @@ static void vc4_hdmi_set_infoframes(stru +@@ -520,6 +523,64 @@ static void vc4_hdmi_set_infoframes(stru vc4_hdmi_set_hdr_infoframe(encoder); } @@ -97,7 +97,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder, struct drm_atomic_state *state) { -@@ -530,6 +591,8 @@ static void vc4_hdmi_encoder_post_crtc_d +@@ -532,6 +593,8 @@ static void vc4_hdmi_encoder_post_crtc_d HDMI_WRITE(HDMI_VID_CTL, HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_BLANKPIX); @@ -106,7 +106,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> } static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder, -@@ -980,6 +1043,7 @@ static void vc4_hdmi_encoder_post_crtc_e +@@ -982,6 +1045,7 @@ static void vc4_hdmi_encoder_post_crtc_e } vc4_hdmi_recenter_fifo(vc4_hdmi); diff --git a/target/linux/bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch b/target/linux/bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch deleted file mode 100644 index 99fd4f4853..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4950d441d18161b2432965ba3fc99382beafdf02 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime@cerno.tech> -Date: Thu, 8 Oct 2020 16:08:06 +0200 -Subject: [PATCH] drm/vc4: hdmi: Raise the maximum clock rate - -Now that we have the infrastructure in place, we can raise the maximum -pixel rate we can reach for HDMI0 on the BCM2711. - -HDMI1 is left untouched since its pixelvalve has a smaller FIFO and -would need a clock faster than what we can provide to support the same -modes. - -Acked-by: Thomas Zimmermann <tzimmermann@suse.de> -Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> -Signed-off-by: Maxime Ripard <maxime@cerno.tech> ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -2434,7 +2434,7 @@ static const struct vc4_hdmi_variant bcm - .encoder_type = VC4_ENCODER_TYPE_HDMI0, - .debugfs_name = "hdmi0_regs", - .card_name = "vc4-hdmi-0", -- .max_pixel_clock = 297000000, -+ .max_pixel_clock = 600000000, - .registers = vc5_hdmi_hdmi0_fields, - .num_registers = ARRAY_SIZE(vc5_hdmi_hdmi0_fields), - .phy_lane_mapping = { diff --git a/target/linux/bcm27xx/patches-5.10/950-0577-vc4-drm-hdmi-Handle-case-when-bvb-clock-is-null.patch b/target/linux/bcm27xx/patches-5.10/950-0577-vc4-drm-hdmi-Handle-case-when-bvb-clock-is-null.patch index aaa67ae4ff..61aa604ba1 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0577-vc4-drm-hdmi-Handle-case-when-bvb-clock-is-null.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0577-vc4-drm-hdmi-Handle-case-when-bvb-clock-is-null.patch @@ -13,7 +13,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -608,7 +608,8 @@ static void vc4_hdmi_encoder_post_crtc_p +@@ -610,7 +610,8 @@ static void vc4_hdmi_encoder_post_crtc_p HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE); clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock); @@ -23,7 +23,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> clk_disable_unprepare(vc4_hdmi->hsm_clock); clk_request_done(vc4_hdmi->hsm_req); clk_disable_unprepare(vc4_hdmi->pixel_clock); -@@ -932,7 +933,8 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -934,7 +935,8 @@ static void vc4_hdmi_encoder_pre_crtc_co else bvb_rate = 75000000; @@ -33,7 +33,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> if (IS_ERR(vc4_hdmi->bvb_req)) { DRM_ERROR("Failed to set pixel bvb clock rate: %ld\n", PTR_ERR(vc4_hdmi->bvb_req)); clk_request_done(vc4_hdmi->hsm_req); -@@ -944,7 +946,8 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -946,7 +948,8 @@ static void vc4_hdmi_encoder_pre_crtc_co ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock); if (ret) { DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret); diff --git a/target/linux/bcm27xx/patches-5.10/950-0597-drm-vc4-crtc-Pass-the-drm_atomic_state-to-config_pv.patch b/target/linux/bcm27xx/patches-5.10/950-0597-drm-vc4-crtc-Pass-the-drm_atomic_state-to-config_pv.patch index 8a980e63d7..8e8aacf46e 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0597-drm-vc4-crtc-Pass-the-drm_atomic_state-to-config_pv.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0597-drm-vc4-crtc-Pass-the-drm_atomic_state-to-config_pv.patch @@ -35,7 +35,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE; u32 pixel_rep = (mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1; bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 || -@@ -540,7 +540,7 @@ static void vc4_crtc_atomic_enable(struc +@@ -541,7 +541,7 @@ static void vc4_crtc_atomic_enable(struc if (vc4_encoder->pre_crtc_configure) vc4_encoder->pre_crtc_configure(encoder, state); diff --git a/target/linux/bcm27xx/patches-5.10/950-0598-drm-vc4-crtc-Fix-vc4_get_crtc_encoder-logic.patch b/target/linux/bcm27xx/patches-5.10/950-0598-drm-vc4-crtc-Fix-vc4_get_crtc_encoder-logic.patch index 0b73698805..41687f6692 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0598-drm-vc4-crtc-Fix-vc4_get_crtc_encoder-logic.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0598-drm-vc4-crtc-Fix-vc4_get_crtc_encoder-logic.patch @@ -61,7 +61,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); const struct vc4_pv_data *pv_data = vc4_crtc_to_vc4_pv_data(vc4_crtc); -@@ -425,7 +434,8 @@ static int vc4_crtc_disable(struct drm_c +@@ -426,7 +435,8 @@ static int vc4_crtc_disable(struct drm_c struct drm_atomic_state *state, unsigned int channel) { @@ -71,7 +71,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); struct drm_device *dev = crtc->dev; -@@ -525,7 +535,8 @@ static void vc4_crtc_atomic_enable(struc +@@ -526,7 +536,8 @@ static void vc4_crtc_atomic_enable(struc { struct drm_device *dev = crtc->dev; struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); diff --git a/target/linux/bcm27xx/patches-5.10/950-0599-drm-vc4-crtc-Lookup-the-encoder-from-the-register-at.patch b/target/linux/bcm27xx/patches-5.10/950-0599-drm-vc4-crtc-Lookup-the-encoder-from-the-register-at.patch index 8009b074a2..f5ef8de723 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0599-drm-vc4-crtc-Lookup-the-encoder-from-the-register-at.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0599-drm-vc4-crtc-Lookup-the-encoder-from-the-register-at.patch @@ -22,7 +22,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -431,11 +431,10 @@ static void require_hvs_enabled(struct d +@@ -432,11 +432,10 @@ static void require_hvs_enabled(struct d } static int vc4_crtc_disable(struct drm_crtc *crtc, @@ -35,7 +35,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); struct drm_device *dev = crtc->dev; -@@ -476,10 +475,29 @@ static int vc4_crtc_disable(struct drm_c +@@ -477,10 +476,29 @@ static int vc4_crtc_disable(struct drm_c return 0; } @@ -65,7 +65,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> int channel; if (!(of_device_is_compatible(vc4_crtc->pdev->dev.of_node, -@@ -498,7 +516,17 @@ int vc4_crtc_disable_at_boot(struct drm_ +@@ -499,7 +517,17 @@ int vc4_crtc_disable_at_boot(struct drm_ if (channel < 0) return 0; @@ -84,7 +84,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> } static void vc4_crtc_atomic_disable(struct drm_crtc *crtc, -@@ -507,6 +535,8 @@ static void vc4_crtc_atomic_disable(stru +@@ -508,6 +536,8 @@ static void vc4_crtc_atomic_disable(stru struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); struct vc4_crtc_state *old_vc4_state = to_vc4_crtc_state(old_state); @@ -93,7 +93,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct drm_device *dev = crtc->dev; require_hvs_enabled(dev); -@@ -514,7 +544,7 @@ static void vc4_crtc_atomic_disable(stru +@@ -515,7 +545,7 @@ static void vc4_crtc_atomic_disable(stru /* Disable vblank irq handling before crtc is disabled. */ drm_crtc_vblank_off(crtc); diff --git a/target/linux/bcm27xx/patches-5.10/950-0600-drm-vc4-hdmi-Simplify-the-connector-state-retrieval.patch b/target/linux/bcm27xx/patches-5.10/950-0600-drm-vc4-hdmi-Simplify-the-connector-state-retrieval.patch index dc80cb416a..be832f61b5 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0600-drm-vc4-hdmi-Simplify-the-connector-state-retrieval.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0600-drm-vc4-hdmi-Simplify-the-connector-state-retrieval.patch @@ -15,7 +15,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -852,31 +852,16 @@ static void vc4_hdmi_recenter_fifo(struc +@@ -854,31 +854,16 @@ static void vc4_hdmi_recenter_fifo(struc "VC4_HDMI_FIFO_CTL_RECENTER_DONE"); } diff --git a/target/linux/bcm27xx/patches-5.10/950-0602-drm-vc4-hdmi-Add-a-workqueue-to-set-scrambling.patch b/target/linux/bcm27xx/patches-5.10/950-0602-drm-vc4-hdmi-Add-a-workqueue-to-set-scrambling.patch index b937aa97fc..2d5b39f858 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0602-drm-vc4-hdmi-Add-a-workqueue-to-set-scrambling.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0602-drm-vc4-hdmi-Add-a-workqueue-to-set-scrambling.patch @@ -18,7 +18,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -538,6 +538,8 @@ static bool vc4_hdmi_supports_scrambling +@@ -540,6 +540,8 @@ static bool vc4_hdmi_supports_scrambling return true; } @@ -27,7 +27,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder) { struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; -@@ -554,6 +556,9 @@ static void vc4_hdmi_enable_scrambling(s +@@ -556,6 +558,9 @@ static void vc4_hdmi_enable_scrambling(s HDMI_WRITE(HDMI_SCRAMBLER_CTL, HDMI_READ(HDMI_SCRAMBLER_CTL) | VC5_HDMI_SCRAMBLER_CTL_ENABLE); @@ -37,7 +37,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> } static void vc4_hdmi_disable_scrambling(struct drm_encoder *encoder) -@@ -572,6 +577,9 @@ static void vc4_hdmi_disable_scrambling( +@@ -574,6 +579,9 @@ static void vc4_hdmi_disable_scrambling( if (crtc && !vc4_hdmi_mode_needs_scrambling(&crtc->mode)) return; @@ -47,7 +47,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> HDMI_WRITE(HDMI_SCRAMBLER_CTL, HDMI_READ(HDMI_SCRAMBLER_CTL) & ~VC5_HDMI_SCRAMBLER_CTL_ENABLE); -@@ -579,6 +587,22 @@ static void vc4_hdmi_disable_scrambling( +@@ -581,6 +589,22 @@ static void vc4_hdmi_disable_scrambling( drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, false); } diff --git a/target/linux/bcm27xx/patches-5.10/950-0636-drm-vc4-Register-HDMI-codec.patch b/target/linux/bcm27xx/patches-5.10/950-0636-drm-vc4-Register-HDMI-codec.patch index 67ac4214f5..72b510d130 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0636-drm-vc4-Register-HDMI-codec.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0636-drm-vc4-Register-HDMI-codec.patch @@ -44,9 +44,9 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> + return (mode->clock * 1000) > HDMI_14_MAX_TMDS_CLK; +} - static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused) - { -@@ -473,16 +480,10 @@ static void vc4_hdmi_set_spd_infoframe(s + #define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000) + +@@ -475,16 +482,10 @@ static void vc4_hdmi_set_spd_infoframe(s static void vc4_hdmi_set_audio_infoframe(struct drm_encoder *encoder) { struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); @@ -65,7 +65,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> vc4_hdmi_write_infoframe(encoder, &frame); } -@@ -1215,18 +1216,10 @@ static inline struct vc4_hdmi *dai_to_hd +@@ -1217,18 +1218,10 @@ static inline struct vc4_hdmi *dai_to_hd return snd_soc_card_get_drvdata(card); } @@ -86,7 +86,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> /* * If the HDMI encoder hasn't probed, or the encoder is -@@ -1236,15 +1229,18 @@ static int vc4_hdmi_audio_startup(struct +@@ -1238,15 +1231,18 @@ static int vc4_hdmi_audio_startup(struct VC4_HDMI_RAM_PACKET_ENABLE)) return -ENODEV; @@ -112,7 +112,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return 0; } -@@ -1264,17 +1260,20 @@ static void vc4_hdmi_audio_reset(struct +@@ -1266,17 +1262,20 @@ static void vc4_hdmi_audio_reset(struct HDMI_WRITE(HDMI_MAI_CTL, VC4_HD_MAI_CTL_FLUSH); } @@ -140,7 +140,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> } static int sample_rate_to_mai_fmt(int samplerate) -@@ -1316,42 +1315,35 @@ static int sample_rate_to_mai_fmt(int sa +@@ -1318,42 +1317,35 @@ static int sample_rate_to_mai_fmt(int sa } /* HDMI audio codec callbacks */ @@ -198,7 +198,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR; else mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM; -@@ -1388,148 +1380,12 @@ static int vc4_hdmi_audio_prepare(struct +@@ -1390,148 +1382,12 @@ static int vc4_hdmi_audio_prepare(struct HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config); vc4_hdmi_set_n_cts(vc4_hdmi); @@ -348,7 +348,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = { SND_SOC_DAPM_OUTPUT("TX"), }; -@@ -1540,8 +1396,6 @@ static const struct snd_soc_dapm_route v +@@ -1542,8 +1398,6 @@ static const struct snd_soc_dapm_route v static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = { .name = "vc4-hdmi-codec-dai-component", @@ -357,7 +357,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> .dapm_widgets = vc4_hdmi_audio_widgets, .num_dapm_widgets = ARRAY_SIZE(vc4_hdmi_audio_widgets), .dapm_routes = vc4_hdmi_audio_routes, -@@ -1552,28 +1406,6 @@ static const struct snd_soc_component_dr +@@ -1554,28 +1408,6 @@ static const struct snd_soc_component_dr .non_legacy_dai_naming = 1, }; @@ -386,7 +386,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static const struct snd_soc_component_driver vc4_hdmi_audio_cpu_dai_comp = { .name = "vc4-hdmi-cpu-dai-component", }; -@@ -1600,7 +1432,6 @@ static struct snd_soc_dai_driver vc4_hdm +@@ -1602,7 +1434,6 @@ static struct snd_soc_dai_driver vc4_hdm SNDRV_PCM_RATE_192000, .formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE, }, @@ -394,7 +394,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> }; static const struct snd_dmaengine_pcm_config pcm_conf = { -@@ -1608,6 +1439,31 @@ static const struct snd_dmaengine_pcm_co +@@ -1610,6 +1441,31 @@ static const struct snd_dmaengine_pcm_co .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, }; @@ -426,13 +426,13 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi) { const struct vc4_hdmi_register *mai_data = -@@ -1615,6 +1471,7 @@ static int vc4_hdmi_audio_init(struct vc +@@ -1617,6 +1473,7 @@ static int vc4_hdmi_audio_init(struct vc struct snd_soc_dai_link *dai_link = &vc4_hdmi->audio.link; struct snd_soc_card *card = &vc4_hdmi->audio.card; struct device *dev = &vc4_hdmi->pdev->dev; + struct platform_device *codec_pdev; const __be32 *addr; - int index; + int index, len; int ret; @@ -1650,11 +1507,6 @@ static int vc4_hdmi_audio_init(struct vc vc4_hdmi->audio.dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; diff --git a/target/linux/bcm27xx/patches-5.10/950-0637-drm-vc4-hdmi-Remove-redundant-variables.patch b/target/linux/bcm27xx/patches-5.10/950-0637-drm-vc4-hdmi-Remove-redundant-variables.patch index 46d306db5a..7bac618516 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0637-drm-vc4-hdmi-Remove-redundant-variables.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0637-drm-vc4-hdmi-Remove-redundant-variables.patch @@ -11,7 +11,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1165,12 +1165,13 @@ static u32 vc5_hdmi_channel_map(struct v +@@ -1167,12 +1167,13 @@ static u32 vc5_hdmi_channel_map(struct v } /* HDMI audio codec callbacks */ @@ -27,7 +27,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> VC4_HD_MAI_SMP_N_MASK >> VC4_HD_MAI_SMP_N_SHIFT, (VC4_HD_MAI_SMP_M_MASK >> -@@ -1182,12 +1183,11 @@ static void vc4_hdmi_audio_set_mai_clock +@@ -1184,12 +1185,11 @@ static void vc4_hdmi_audio_set_mai_clock VC4_SET_FIELD(m - 1, VC4_HD_MAI_SMP_M)); } @@ -41,7 +41,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> u32 n, cts; u64 tmp; -@@ -1321,27 +1321,25 @@ static int vc4_hdmi_audio_prepare(struct +@@ -1323,27 +1323,25 @@ static int vc4_hdmi_audio_prepare(struct { struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev); struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base; @@ -75,7 +75,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> if (params->iec.status[0] & IEC958_AES0_NONAUDIO && params->channels == 8) mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR; -@@ -1359,7 +1357,7 @@ static int vc4_hdmi_audio_prepare(struct +@@ -1361,7 +1359,7 @@ static int vc4_hdmi_audio_prepare(struct VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_INACTIVE_CHANNELS | VC4_SET_FIELD(0x8, VC4_HDMI_AUDIO_PACKET_B_FRAME_IDENTIFIER); @@ -84,7 +84,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> audio_packet_config |= VC4_SET_FIELD(channel_mask, VC4_HDMI_AUDIO_PACKET_CEA_MASK); -@@ -1378,7 +1376,7 @@ static int vc4_hdmi_audio_prepare(struct +@@ -1380,7 +1378,7 @@ static int vc4_hdmi_audio_prepare(struct channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask); HDMI_WRITE(HDMI_MAI_CHANNEL_MAP, channel_map); HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config); diff --git a/target/linux/bcm27xx/patches-5.10/950-0643-drm-vc4-crtc-Add-encoder-to-vc4_crtc_config_pv-proto.patch b/target/linux/bcm27xx/patches-5.10/950-0643-drm-vc4-crtc-Add-encoder-to-vc4_crtc_config_pv-proto.patch index 0be9ad33ef..14374d7c37 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0643-drm-vc4-crtc-Add-encoder-to-vc4_crtc_config_pv-proto.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0643-drm-vc4-crtc-Add-encoder-to-vc4_crtc_config_pv-proto.patch @@ -32,7 +32,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); const struct vc4_pv_data *pv_data = vc4_crtc_to_vc4_pv_data(vc4_crtc); -@@ -581,7 +580,7 @@ static void vc4_crtc_atomic_enable(struc +@@ -582,7 +581,7 @@ static void vc4_crtc_atomic_enable(struc if (vc4_encoder->pre_crtc_configure) vc4_encoder->pre_crtc_configure(encoder, state); diff --git a/target/linux/bcm27xx/patches-5.10/950-0644-drm-vc4-crtc-Rework-the-encoder-retrieval-code-again.patch b/target/linux/bcm27xx/patches-5.10/950-0644-drm-vc4-crtc-Rework-the-encoder-retrieval-code-again.patch index 3b8a0c097d..e39f3c0441 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0644-drm-vc4-crtc-Rework-the-encoder-retrieval-code-again.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0644-drm-vc4-crtc-Rework-the-encoder-retrieval-code-again.patch @@ -57,7 +57,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return NULL; } -@@ -534,8 +522,7 @@ static void vc4_crtc_atomic_disable(stru +@@ -535,8 +523,7 @@ static void vc4_crtc_atomic_disable(stru struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); struct vc4_crtc_state *old_vc4_state = to_vc4_crtc_state(old_state); @@ -67,7 +67,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> struct drm_device *dev = crtc->dev; require_hvs_enabled(dev); -@@ -562,10 +549,11 @@ static void vc4_crtc_atomic_disable(stru +@@ -563,10 +550,11 @@ static void vc4_crtc_atomic_disable(stru static void vc4_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state) { diff --git a/target/linux/bcm27xx/patches-5.10/950-0645-drm-vc4-crtc-Add-some-logging.patch b/target/linux/bcm27xx/patches-5.10/950-0645-drm-vc4-crtc-Add-some-logging.patch index fbc1f90e3f..af76b50ea5 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0645-drm-vc4-crtc-Add-some-logging.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0645-drm-vc4-crtc-Add-some-logging.patch @@ -16,7 +16,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -525,6 +525,9 @@ static void vc4_crtc_atomic_disable(stru +@@ -526,6 +526,9 @@ static void vc4_crtc_atomic_disable(stru struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc, old_state); struct drm_device *dev = crtc->dev; @@ -26,7 +26,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> require_hvs_enabled(dev); /* Disable vblank irq handling before crtc is disabled. */ -@@ -556,6 +559,9 @@ static void vc4_crtc_atomic_enable(struc +@@ -557,6 +560,9 @@ static void vc4_crtc_atomic_enable(struc struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc, new_state); struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); diff --git a/target/linux/bcm27xx/patches-5.10/950-0646-drm-vc4-Leverage-the-load-tracker-on-the-BCM2711.patch b/target/linux/bcm27xx/patches-5.10/950-0646-drm-vc4-Leverage-the-load-tracker-on-the-BCM2711.patch index be486cc17a..a9168f2f6c 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0646-drm-vc4-Leverage-the-load-tracker-on-the-BCM2711.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0646-drm-vc4-Leverage-the-load-tracker-on-the-BCM2711.patch @@ -109,7 +109,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> */ --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -534,9 +534,6 @@ static void vc4_plane_calc_load(struct d +@@ -535,9 +535,6 @@ static void vc4_plane_calc_load(struct d struct vc4_dev *vc4; vc4 = to_vc4_dev(state->plane->dev); diff --git a/target/linux/bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch b/target/linux/bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch deleted file mode 100644 index 62a4ea3d37..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 5afb722d255335954c6b67470e0d261ea5d5ab7a Mon Sep 17 00:00:00 2001 -From: kFYatek <4499762+kFYatek@users.noreply.github.com> -Date: Wed, 23 Jun 2021 01:11:26 +0200 -Subject: [PATCH] drm/vc4: Fix timings for interlaced modes - -Increase the number of post-sync blanking lines on odd fields instead of -decreasing it on even fields. This makes the total number of lines -properly match the modelines. - -Additionally fix the value of PV_VCONTROL_ODD_DELAY, which did not take -pixels_per_clock into account, causing some displays to invert the -fields when driven by bcm2711. - -Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 7 ++++--- - drivers/gpu/drm/vc4/vc4_hdmi.c | 12 ++++++------ - 2 files changed, 10 insertions(+), 9 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -342,7 +342,8 @@ static void vc4_crtc_config_pv(struct dr - PV_HORZB_HACTIVE)); - - CRTC_WRITE(PV_VERTA, -- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end, -+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end + -+ interlace, - PV_VERTA_VBP) | - VC4_SET_FIELD(mode->crtc_vsync_end - mode->crtc_vsync_start, - PV_VERTA_VSYNC)); -@@ -354,7 +355,7 @@ static void vc4_crtc_config_pv(struct dr - if (interlace) { - CRTC_WRITE(PV_VERTA_EVEN, - VC4_SET_FIELD(mode->crtc_vtotal - -- mode->crtc_vsync_end - 1, -+ mode->crtc_vsync_end, - PV_VERTA_VBP) | - VC4_SET_FIELD(mode->crtc_vsync_end - - mode->crtc_vsync_start, -@@ -374,7 +375,7 @@ static void vc4_crtc_config_pv(struct dr - PV_VCONTROL_CONTINUOUS | - (is_dsi ? PV_VCONTROL_DSI : 0) | - PV_VCONTROL_INTERLACE | -- VC4_SET_FIELD(mode->htotal * pixel_rep / 2, -+ VC4_SET_FIELD(mode->htotal * pixel_rep / (2 * ppc), - PV_VCONTROL_ODD_DELAY)); - CRTC_WRITE(PV_VSYNCD_EVEN, 0); - } else { ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -736,12 +736,12 @@ static void vc4_hdmi_set_timings(struct - VC4_HDMI_VERTA_VFP) | - VC4_SET_FIELD(mode->crtc_vdisplay, VC4_HDMI_VERTA_VAL)); - u32 vertb = (VC4_SET_FIELD(0, VC4_HDMI_VERTB_VSPO) | -- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end, -+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end + -+ interlaced, - VC4_HDMI_VERTB_VBP)); - u32 vertb_even = (VC4_SET_FIELD(0, VC4_HDMI_VERTB_VSPO) | - VC4_SET_FIELD(mode->crtc_vtotal - -- mode->crtc_vsync_end - -- interlaced, -+ mode->crtc_vsync_end, - VC4_HDMI_VERTB_VBP)); - - HDMI_WRITE(HDMI_HORZA, -@@ -782,12 +782,12 @@ static void vc5_hdmi_set_timings(struct - VC5_HDMI_VERTA_VFP) | - VC4_SET_FIELD(mode->crtc_vdisplay, VC5_HDMI_VERTA_VAL)); - u32 vertb = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) | -- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end, -+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end + -+ interlaced, - VC4_HDMI_VERTB_VBP)); - u32 vertb_even = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) | - VC4_SET_FIELD(mode->crtc_vtotal - -- mode->crtc_vsync_end - -- interlaced, -+ mode->crtc_vsync_end, - VC4_HDMI_VERTB_VBP)); - unsigned char gcp; - bool gcp_en; diff --git a/target/linux/bcm27xx/patches-5.10/950-0652-drm-vc4-Fix-pixel-wrap-issue-with-DVP-teardown.patch b/target/linux/bcm27xx/patches-5.10/950-0652-drm-vc4-Fix-pixel-wrap-issue-with-DVP-teardown.patch index a260479072..03493aaa1c 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0652-drm-vc4-Fix-pixel-wrap-issue-with-DVP-teardown.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0652-drm-vc4-Fix-pixel-wrap-issue-with-DVP-teardown.patch @@ -19,7 +19,7 @@ Signed-off-by: Tim Gover <tim.gover@raspberrypi.com> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -611,12 +611,12 @@ static void vc4_hdmi_encoder_post_crtc_d +@@ -613,12 +613,12 @@ static void vc4_hdmi_encoder_post_crtc_d HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0); @@ -36,7 +36,7 @@ Signed-off-by: Tim Gover <tim.gover@raspberrypi.com> vc4_hdmi_disable_scrambling(encoder); } -@@ -626,12 +626,12 @@ static void vc4_hdmi_encoder_post_crtc_p +@@ -628,12 +628,12 @@ static void vc4_hdmi_encoder_post_crtc_p struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); int ret; @@ -52,7 +52,7 @@ Signed-off-by: Tim Gover <tim.gover@raspberrypi.com> clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock); if (vc4_hdmi->bvb_req) clk_request_done(vc4_hdmi->bvb_req); -@@ -1011,6 +1011,7 @@ static void vc4_hdmi_encoder_post_crtc_e +@@ -1013,6 +1013,7 @@ static void vc4_hdmi_encoder_post_crtc_e HDMI_WRITE(HDMI_VID_CTL, VC4_HD_VID_CTL_ENABLE | diff --git a/target/linux/bcm27xx/patches-5.10/950-0654-drm-vc4-hdmi-Use-a-fixed-rate-for-the-HSM-clock-on-B.patch b/target/linux/bcm27xx/patches-5.10/950-0654-drm-vc4-hdmi-Use-a-fixed-rate-for-the-HSM-clock-on-B.patch index e8f206af0c..36dcc7475c 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0654-drm-vc4-hdmi-Use-a-fixed-rate-for-the-HSM-clock-on-B.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0654-drm-vc4-hdmi-Use-a-fixed-rate-for-the-HSM-clock-on-B.patch @@ -37,7 +37,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -909,23 +909,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -911,23 +911,7 @@ static void vc4_hdmi_encoder_pre_crtc_co return; } @@ -62,7 +62,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> vc4_hdmi->hsm_req = clk_request_start(vc4_hdmi->hsm_clock, hsm_rate); if (IS_ERR(vc4_hdmi->hsm_req)) { DRM_ERROR("Failed to set HSM clock rate: %ld\n", PTR_ERR(vc4_hdmi->hsm_req)); -@@ -1141,6 +1125,39 @@ static const struct drm_encoder_helper_f +@@ -1143,6 +1127,39 @@ static const struct drm_encoder_helper_f .enable = vc4_hdmi_encoder_enable, }; diff --git a/target/linux/bcm27xx/patches-5.10/950-0655-drm-vc4-hdmi-Enable-the-scrambler-on-reconnection.patch b/target/linux/bcm27xx/patches-5.10/950-0655-drm-vc4-hdmi-Enable-the-scrambler-on-reconnection.patch index 17e9caf6c3..442e0bccf9 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0655-drm-vc4-hdmi-Enable-the-scrambler-on-reconnection.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0655-drm-vc4-hdmi-Enable-the-scrambler-on-reconnection.patch @@ -19,7 +19,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -168,6 +168,8 @@ static void vc4_hdmi_cec_update_clk_div( +@@ -170,6 +170,8 @@ static void vc4_hdmi_cec_update_clk_div( static void vc4_hdmi_cec_update_clk_div(struct vc4_hdmi *vc4_hdmi) {} #endif @@ -28,7 +28,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> static enum drm_connector_status vc4_hdmi_connector_detect(struct drm_connector *connector, bool force) { -@@ -197,6 +199,8 @@ vc4_hdmi_connector_detect(struct drm_con +@@ -199,6 +201,8 @@ vc4_hdmi_connector_detect(struct drm_con } } @@ -37,7 +37,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> pm_runtime_put(&vc4_hdmi->pdev->dev); return connector_status_connected; } -@@ -543,9 +547,13 @@ static bool vc4_hdmi_supports_scrambling +@@ -545,9 +549,13 @@ static bool vc4_hdmi_supports_scrambling static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder) { diff --git a/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch b/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch index 6be52cb43b..7149776277 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch @@ -16,7 +16,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -901,6 +901,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -903,6 +903,7 @@ static void vc4_hdmi_encoder_pre_crtc_co ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev); if (ret < 0) { DRM_ERROR("Failed to retain power domain: %d\n", ret); @@ -24,7 +24,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -908,12 +909,14 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -910,12 +911,14 @@ static void vc4_hdmi_encoder_pre_crtc_co ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate); if (ret) { DRM_ERROR("Failed to set pixel clock rate: %d\n", ret); @@ -39,7 +39,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -921,6 +924,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -923,6 +926,7 @@ static void vc4_hdmi_encoder_pre_crtc_co vc4_hdmi->hsm_req = clk_request_start(vc4_hdmi->hsm_clock, hsm_rate); if (IS_ERR(vc4_hdmi->hsm_req)) { DRM_ERROR("Failed to set HSM clock rate: %ld\n", PTR_ERR(vc4_hdmi->hsm_req)); @@ -47,7 +47,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -942,6 +946,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -944,6 +948,7 @@ static void vc4_hdmi_encoder_pre_crtc_co clk_request_done(vc4_hdmi->hsm_req); clk_disable_unprepare(vc4_hdmi->hsm_clock); clk_disable_unprepare(vc4_hdmi->pixel_clock); @@ -55,7 +55,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -953,6 +958,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -955,6 +960,7 @@ static void vc4_hdmi_encoder_pre_crtc_co clk_request_done(vc4_hdmi->hsm_req); clk_disable_unprepare(vc4_hdmi->hsm_clock); clk_disable_unprepare(vc4_hdmi->pixel_clock); diff --git a/target/linux/bcm27xx/patches-5.10/950-0670-drm-vc4-hdmi-Add-missing-clk_disable_unprepare-on-er.patch b/target/linux/bcm27xx/patches-5.10/950-0670-drm-vc4-hdmi-Add-missing-clk_disable_unprepare-on-er.patch index 71ef2c42fb..5a5f8c181b 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0670-drm-vc4-hdmi-Add-missing-clk_disable_unprepare-on-er.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0670-drm-vc4-hdmi-Add-missing-clk_disable_unprepare-on-er.patch @@ -18,7 +18,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -924,6 +924,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -926,6 +926,7 @@ static void vc4_hdmi_encoder_pre_crtc_co vc4_hdmi->hsm_req = clk_request_start(vc4_hdmi->hsm_clock, hsm_rate); if (IS_ERR(vc4_hdmi->hsm_req)) { DRM_ERROR("Failed to set HSM clock rate: %ld\n", PTR_ERR(vc4_hdmi->hsm_req)); diff --git a/target/linux/bcm27xx/patches-5.10/950-0673-vc4-drv-Only-notify-firmware-of-display-done-with-km.patch b/target/linux/bcm27xx/patches-5.10/950-0673-vc4-drv-Only-notify-firmware-of-display-done-with-km.patch index a15245626f..76f202218a 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0673-vc4-drv-Only-notify-firmware-of-display-done-with-km.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0673-vc4-drv-Only-notify-firmware-of-display-done-with-km.patch @@ -13,7 +13,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com> --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -258,6 +258,18 @@ const struct of_device_id vc4_dma_range_ +@@ -258,6 +258,18 @@ static const struct of_device_id vc4_dma {} }; diff --git a/target/linux/bcm27xx/patches-5.10/950-0684-drm-vc4-hdmi-Don-t-poll-for-the-infoframes-status-on.patch b/target/linux/bcm27xx/patches-5.10/950-0684-drm-vc4-hdmi-Don-t-poll-for-the-infoframes-status-on.patch index b613e9a730..a0b38083ca 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0684-drm-vc4-hdmi-Don-t-poll-for-the-infoframes-status-on.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0684-drm-vc4-hdmi-Don-t-poll-for-the-infoframes-status-on.patch @@ -23,7 +23,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxi --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -364,7 +364,8 @@ static int vc4_hdmi_connector_init(struc +@@ -366,7 +366,8 @@ static int vc4_hdmi_connector_init(struc } static int vc4_hdmi_stop_packet(struct drm_encoder *encoder, @@ -33,7 +33,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxi { struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); u32 packet_id = type - 0x80; -@@ -372,6 +373,9 @@ static int vc4_hdmi_stop_packet(struct d +@@ -374,6 +375,9 @@ static int vc4_hdmi_stop_packet(struct d HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, HDMI_READ(HDMI_RAM_PACKET_CONFIG) & ~BIT(packet_id)); @@ -43,7 +43,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxi return wait_for(!(HDMI_READ(HDMI_RAM_PACKET_STATUS) & BIT(packet_id)), 100); } -@@ -400,7 +404,7 @@ static void vc4_hdmi_write_infoframe(str +@@ -402,7 +406,7 @@ static void vc4_hdmi_write_infoframe(str if (len < 0) return; @@ -52,7 +52,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxi if (ret) { DRM_ERROR("Failed to wait for infoframe to go idle: %d\n", ret); return; -@@ -1284,7 +1288,7 @@ static void vc4_hdmi_audio_reset(struct +@@ -1286,7 +1290,7 @@ static void vc4_hdmi_audio_reset(struct int ret; vc4_hdmi->audio.streaming = false; diff --git a/target/linux/bcm27xx/patches-5.10/950-0687-drm-vc4-Remove-unnecessary-drm_plane_cleanup-wrapper.patch b/target/linux/bcm27xx/patches-5.10/950-0687-drm-vc4-Remove-unnecessary-drm_plane_cleanup-wrapper.patch index c5c3bab555..55fa876531 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0687-drm-vc4-Remove-unnecessary-drm_plane_cleanup-wrapper.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0687-drm-vc4-Remove-unnecessary-drm_plane_cleanup-wrapper.patch @@ -16,7 +16,7 @@ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -1363,11 +1363,6 @@ static const struct drm_plane_helper_fun +@@ -1364,11 +1364,6 @@ static const struct drm_plane_helper_fun .atomic_async_update = vc4_plane_atomic_async_update, }; @@ -28,7 +28,7 @@ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> static bool vc4_format_mod_supported(struct drm_plane *plane, uint32_t format, uint64_t modifier) -@@ -1425,7 +1420,7 @@ static bool vc4_format_mod_supported(str +@@ -1426,7 +1421,7 @@ static bool vc4_format_mod_supported(str static const struct drm_plane_funcs vc4_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, diff --git a/target/linux/bcm27xx/patches-5.10/950-0688-drm-vc4-plane-Remove-redundant-assignment.patch b/target/linux/bcm27xx/patches-5.10/950-0688-drm-vc4-plane-Remove-redundant-assignment.patch index b22a084a8f..d1ed6740d5 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0688-drm-vc4-plane-Remove-redundant-assignment.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0688-drm-vc4-plane-Remove-redundant-assignment.patch @@ -16,7 +16,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-2-max --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -1226,7 +1226,6 @@ static void vc4_plane_atomic_async_updat +@@ -1227,7 +1227,6 @@ static void vc4_plane_atomic_async_updat plane->state->src_y = state->src_y; plane->state->src_w = state->src_w; plane->state->src_h = state->src_h; diff --git a/target/linux/bcm27xx/patches-5.10/950-0689-drm-automatic-legacy-gamma-support.patch b/target/linux/bcm27xx/patches-5.10/950-0689-drm-automatic-legacy-gamma-support.patch index 9816f9de75..4ef9fa2d55 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0689-drm-automatic-legacy-gamma-support.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0689-drm-automatic-legacy-gamma-support.patch @@ -405,7 +405,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi /* ----------------------------------------------------------------------------- --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c -@@ -1642,7 +1642,6 @@ static const struct drm_crtc_funcs vop_c +@@ -1645,7 +1645,6 @@ static const struct drm_crtc_funcs vop_c .disable_vblank = vop_crtc_disable_vblank, .set_crc_source = vop_crtc_set_crc_source, .verify_crc_source = vop_crtc_verify_crc_source, diff --git a/target/linux/bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch b/target/linux/bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch deleted file mode 100644 index ced98fd502..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 0427e8464446a03d287e7ec8b7bb74dd983b6988 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.com> -Date: Mon, 12 Jul 2021 12:27:59 +0100 -Subject: [PATCH] drm/vc4: Fix margin calculations for the right/bottom - edges - -The calculations clipped the right/bottom edge of the clipped -range based on the left/top margins. - -Fixes: 666e73587f90 ("drm/vc4: Take margin setup into account when updating planes") -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> ---- - drivers/gpu/drm/vc4/vc4_plane.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_plane.c -+++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -310,16 +310,16 @@ static int vc4_plane_margins_adj(struct - adjhdisplay, - crtc_state->mode.hdisplay); - vc4_pstate->crtc_x += left; -- if (vc4_pstate->crtc_x > crtc_state->mode.hdisplay - left) -- vc4_pstate->crtc_x = crtc_state->mode.hdisplay - left; -+ if (vc4_pstate->crtc_x > crtc_state->mode.hdisplay - right) -+ vc4_pstate->crtc_x = crtc_state->mode.hdisplay - right; - - adjvdisplay = crtc_state->mode.vdisplay - (top + bottom); - vc4_pstate->crtc_y = DIV_ROUND_CLOSEST(vc4_pstate->crtc_y * - adjvdisplay, - crtc_state->mode.vdisplay); - vc4_pstate->crtc_y += top; -- if (vc4_pstate->crtc_y > crtc_state->mode.vdisplay - top) -- vc4_pstate->crtc_y = crtc_state->mode.vdisplay - top; -+ if (vc4_pstate->crtc_y > crtc_state->mode.vdisplay - bottom) -+ vc4_pstate->crtc_y = crtc_state->mode.vdisplay - bottom; - - vc4_pstate->crtc_w = DIV_ROUND_CLOSEST(vc4_pstate->crtc_w * - adjhdisplay, diff --git a/target/linux/bcm27xx/patches-5.10/950-0738-Makefiles-dt-Always-set-on-ARCH_BCM2835.patch b/target/linux/bcm27xx/patches-5.10/950-0738-Makefiles-dt-Always-set-on-ARCH_BCM2835.patch index db966ef86f..4a34c35d9c 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0738-Makefiles-dt-Always-set-on-ARCH_BCM2835.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0738-Makefiles-dt-Always-set-on-ARCH_BCM2835.patch @@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com> --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -1433,5 +1433,5 @@ subdir-y := overlays +@@ -1434,5 +1434,5 @@ subdir-y := overlays # Enable fixups to support overlays on BCM2835 platforms ifeq ($(CONFIG_ARCH_BCM2835),y) diff --git a/target/linux/generic/pending-5.10/419-mtd-redboot-add-of_match_table-with-DT-binding.patch b/target/linux/generic/pending-5.10/419-mtd-redboot-add-of_match_table-with-DT-binding.patch index 7692f484ae..3ea5f4abb4 100644 --- a/target/linux/generic/pending-5.10/419-mtd-redboot-add-of_match_table-with-DT-binding.patch +++ b/target/linux/generic/pending-5.10/419-mtd-redboot-add-of_match_table-with-DT-binding.patch @@ -12,7 +12,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- a/drivers/mtd/parsers/redboot.c +++ b/drivers/mtd/parsers/redboot.c -@@ -305,6 +305,7 @@ static int parse_redboot_partitions(stru +@@ -306,6 +306,7 @@ static int parse_redboot_partitions(stru static const struct of_device_id mtd_parser_redboot_of_match_table[] = { { .compatible = "redboot-fis" }, diff --git a/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch index 95819dfe92..33d27a1815 100644 --- a/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch +++ b/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch @@ -19,7 +19,7 @@ }, [PORT_NPCM] = { .name = "Nuvoton 16550", -@@ -2737,6 +2737,11 @@ serial8250_do_set_termios(struct uart_po +@@ -2716,6 +2716,11 @@ serial8250_do_set_termios(struct uart_po unsigned long flags; unsigned int baud, quot, frac = 0; |