aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorThibaut VARÈNE <hacks@slashdirt.org>2022-04-15 13:17:53 +0200
committerPetr Štetiar <ynezz@true.cz>2022-04-16 14:48:45 +0200
commit2cc9ee8000597fe132071ec3ba6bf0ac9404ac94 (patch)
treebdf33f70a1800e67733d7bb61a649296671c36df
parent06874171d125f0a69d6fb8cfd12213b7913d317e (diff)
downloadupstream-2cc9ee8000597fe132071ec3ba6bf0ac9404ac94.tar.gz
upstream-2cc9ee8000597fe132071ec3ba6bf0ac9404ac94.tar.bz2
upstream-2cc9ee8000597fe132071ec3ba6bf0ac9404ac94.zip
ath79: add support for Yuncore A930
Specification: - QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR - 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN) - 2T2R 802.11b/g/n 2.4GHz Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry-picked from commit a05dcb07241aa83a4416b56201e31b4af8518981) [switch to mtd-mac-address instead of nvmem-cells]
-rw-r--r--package/boot/uboot-envtools/files/ath791
-rw-r--r--target/linux/ath79/dts/qca9533_yuncore_a930.dts102
-rw-r--r--target/linux/ath79/image/generic.mk10
3 files changed, 113 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index 8d9536f95e..8bc7dc5ebf 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -61,6 +61,7 @@ samsung,wam250|\
ubnt,nanostation-m|\
yuncore,a770|\
yuncore,a782|\
+yuncore,a930|\
yuncore,xd3200|\
yuncore,xd4200|\
zyxel,nbg6616)
diff --git a/target/linux/ath79/dts/qca9533_yuncore_a930.dts b/target/linux/ath79/dts/qca9533_yuncore_a930.dts
new file mode 100644
index 0000000000..f83dca0697
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_yuncore_a930.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "yuncore,a930", "qca,qca9533";
+ model = "YunCore A930";
+
+ aliases {
+ label-mac-device = &eth1;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index cac5dea3d2..f6e6f98db9 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -2242,6 +2242,16 @@ define Device/yuncore_a782
endef
TARGET_DEVICES += yuncore_a782
+define Device/yuncore_a930
+ SOC := qca9533
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := A930
+ IMAGE_SIZE := 16000k
+ IMAGES += tftp.bin
+ IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
+endef
+TARGET_DEVICES += yuncore_a930
+
define Device/yuncore_xd3200
SOC := qca9563
DEVICE_VENDOR := YunCore