aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-12-08 20:18:58 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-01-29 18:56:04 +0100
commitb4d3110ac1f1f1962f812ac139c437837a448cff (patch)
treec0f4ca2d030f69df27b79d5a50ab81dd2deac39d
parentc69c20c6670081d1eaab000734d89de57eb64148 (diff)
downloadupstream-b4d3110ac1f1f1962f812ac139c437837a448cff.tar.gz
upstream-b4d3110ac1f1f1962f812ac139c437837a448cff.tar.bz2
upstream-b4d3110ac1f1f1962f812ac139c437837a448cff.zip
ath79: add support for GL.iNet 6408/6416 (GL.iNet V1)
This ports the GL.iNet 6408/6416 from ar71xx. The GL-Connect GL.iNet v1 routers are basically a TP-Link TL-WR710N with more DRAM/Flash and console/GPIO header in the same small form-factor. Specifications: - SoC: Atheros AR9331 - CPU: 400 MHz - Flash: 8/16 MiB - RAM: 64 MiB - WiFi: 2.4 GHz b/g/n (SoC) - Ethernet: 2x 100M ports (LAN/WAN) - USB: 1x 2.0 The difference between 6408 and 6416 is just the flash size. It looks like only the 16 MiB version has been advertised, while the 6408 is a modified version. There are also 1-port versions sold by third parties. Installation: Install the sysupgrade image via stock firmware GUI or upload it via uboot (web-based). The device will be available at 192.168.1.1. Attention: In ar71xx, the same board name is used for both flash versions. So, please make sure you flash the correct ath79 image when upgrading. This has been device-tested on a GL.iNet 6416. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-rw-r--r--target/linux/ath79/dts/ar9331_glinet_6408.dts45
-rw-r--r--target/linux/ath79/dts/ar9331_glinet_6416.dts45
-rw-r--r--target/linux/ath79/dts/ar9331_glinet_64xx.dtsi91
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds4
-rw-r--r--target/linux/ath79/image/generic.mk26
5 files changed, 211 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_glinet_6408.dts b/target/linux/ath79/dts/ar9331_glinet_6408.dts
new file mode 100644
index 0000000000..1215607469
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_6408.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9331_glinet_64xx.dtsi"
+
+/ {
+ model = "GL.iNet 6408";
+ compatible = "glinet,6408", "qca,ar9331";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x7d0000>;
+ label = "firmware";
+ };
+
+ art: partition@7f0000 {
+ reg = <0x7f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_glinet_6416.dts b/target/linux/ath79/dts/ar9331_glinet_6416.dts
new file mode 100644
index 0000000000..5f10b6aada
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_6416.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9331_glinet_64xx.dtsi"
+
+/ {
+ model = "GL.iNet 6416";
+ compatible = "glinet,6416", "qca,ar9331";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0xfd0000>;
+ label = "firmware";
+ };
+
+ art: partition@ff0000 {
+ reg = <0xff0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_glinet_64xx.dtsi b/target/linux/ath79/dts/ar9331_glinet_64xx.dtsi
new file mode 100644
index 0000000000..2fa970248a
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_64xx.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart;
+ label-mac-device = &wmac;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "gl-inet:red:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "gl-inet:green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&gpio {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <&reg_usb_vbus>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 1023ba7a39..43c685b81c 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -90,6 +90,10 @@ etactica,eg200)
ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
;;
+glinet,6408|\
+glinet,6416)
+ ucidef_set_led_netdev "lan" "LAN" "gl-inet:green:lan" "eth0"
+ ;;
glinet,gl-ar150)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 4f45b122ce..1bc7b2d68e 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -567,6 +567,32 @@ define Device/etactica_eg200
endef
TARGET_DEVICES += etactica_eg200
+define Device/glinet_6408
+ $(Device/tplink-8mlzma)
+ SOC := ar9331
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := 6408
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 8000k
+ TPLINK_HWID := 0x08000001
+ IMAGES := sysupgrade.bin
+ SUPPORTED_DEVICES += gl-inet
+endef
+TARGET_DEVICES += glinet_6408
+
+define Device/glinet_6416
+ $(Device/tplink-16mlzma)
+ SOC := ar9331
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := 6416
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 16192k
+ TPLINK_HWID := 0x08000001
+ IMAGES := sysupgrade.bin
+ SUPPORTED_DEVICES += gl-inet
+endef
+TARGET_DEVICES += glinet_6416
+
define Device/glinet_gl-ar150
SOC := ar9330
DEVICE_VENDOR := GL.iNet