aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohannes Kimmel <fff@bareminimum.eu>2020-07-20 08:05:10 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-07-20 13:43:36 +0200
commit65e9de3c333bae1ccef1dfb0cc008ad6f13958e4 (patch)
treedeb5b7a7ab3181860a85b375b00a553ec9075b5b
parent5222aadbf353b7cc030c39aa816f33951b104552 (diff)
downloadupstream-65e9de3c333bae1ccef1dfb0cc008ad6f13958e4.tar.gz
upstream-65e9de3c333bae1ccef1dfb0cc008ad6f13958e4.tar.bz2
upstream-65e9de3c333bae1ccef1dfb0cc008ad6f13958e4.zip
vxlan: add capability for multiple fdb entries
Similar to wireguard, vxlan can configure multiple peers or add specific entries to the fdb for a single mac address. While you can still use peeraddr/peer6addr option within the proto vxlan/vxlan6 section to not break existing configurations, this patch allows to add multiple sections that conigure fdb entries via the bridge command. As such, the bridge command is now a dependency of the vxlan package. (To be honest without the bridge command available, vxlan isn't very much fun to use or debug at all) Field names are taken direclty from the bridge command. Example with all supported parameters, since this hasn't been documented so far: config interface 'vx0' option proto 'vxlan6' # use vxlan over ipv6 # main options option ip6addr '2001:db8::1' # listen address option tunlink 'wan6' # optional if listen address given option peer6addr '2001:db8::2' # now optional option port '8472' # this is the standard port under linux option vid '42' # VXLAN Network Identifier to use option mtu '1430' # vxlan6 has 70 bytes overhead # extra options option rxcsum '0' # allow receiving packets without checksum option txcsum '0' # send packets without checksum option ttl '16' # specifies the TTL value for outgoing packets option tos '0' # specifies the TOS value for outgoing packets option macaddr '11:22:33:44:55:66' # optional, manually specify mac # default is a random address Single peer with head-end replication. Corresponds to the following call to bridge: $ bridge fdb append 00:00:00:00:00:00 dev vx0 dst 2001:db8::3 config vxlan_peer option vxlan 'vx0' option dst '2001:db8::3' # always required For multiple peers, this section can be repeated for each dst address. It's possible to specify a multicast address as destination. Useful when multicast routing is available or within one lan segment: config vxlan_peer option vxlan 'vx0' option dst 'ff02::1337' # multicast group to join. # all bum traffic will be send there option via 'eth1' # for multicast, an outgoing interface needs # to be specified All available peer options for completeness: config vxlan_peer option vxlan 'vx0' # the interface to configure option lladdr 'aa:bb:cc:dd:ee:ff' # specific mac, option dst '2001:db8::4' # connected to this peer option via 'eth0.1' # use this interface only option port '4789' # use different port for this peer option vni '23' # override vni for this peer option src_vni '123' # see man 3 bridge Signed-off-by: Johannes Kimmel <fff@bareminimum.eu>
-rw-r--r--package/network/config/vxlan/Makefile2
-rwxr-xr-xpackage/network/config/vxlan/files/vxlan.sh48
2 files changed, 48 insertions, 2 deletions
diff --git a/package/network/config/vxlan/Makefile b/package/network/config/vxlan/Makefile
index 13fcf0c55d..7232f71b45 100644
--- a/package/network/config/vxlan/Makefile
+++ b/package/network/config/vxlan/Makefile
@@ -1,7 +1,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=vxlan
-PKG_RELEASE:=3
+PKG_RELEASE:=4
PKG_LICENSE:=GPL-2.0
include $(INCLUDE_DIR)/package.mk
diff --git a/package/network/config/vxlan/files/vxlan.sh b/package/network/config/vxlan/files/vxlan.sh
index bdcaa628c4..d063c47d47 100755
--- a/package/network/config/vxlan/files/vxlan.sh
+++ b/package/network/config/vxlan/files/vxlan.sh
@@ -7,6 +7,50 @@
init_proto "$@"
}
+proto_vxlan_setup_peer() {
+ type bridge &> /dev/null || {
+ proto_notify_error "$cfg" "MISSING_BRIDGE_COMMAND"
+ exit
+ }
+
+ local peer_config="$1"
+
+ local vxlan
+ local lladdr
+ local dst
+ local src_vni
+ local vni
+ local port
+ local via
+
+ config_get vxlan "${peer_config}" "vxlan"
+ config_get lladdr "${peer_config}" "lladdr"
+ config_get dst "${peer_config}" "dst"
+ config_get src_vni "${peer_config}" "src_vni"
+ config_get vni "${peer_config}" "vni"
+ config_get port "${peer_config}" "port"
+ config_get via "${peer_config}" "via"
+
+ [ "$cfg" = "$vxlan" ] || {
+ # This peer section belongs to another device
+ return
+ }
+
+ [ -n "${dst}" ] || {
+ proto_notify_error "$cfg" "MISSING_PEER_ADDRESS"
+ exit
+ }
+
+ bridge fdb append \
+ ${lladdr:-00:00:00:00:00:00} \
+ dev ${cfg} \
+ dst ${dst} \
+ ${src_vni:+src_vni $src_vni} \
+ ${vni:+vni $vni} \
+ ${port:+port $port} \
+ ${via:+via $via}
+}
+
vxlan_generic_setup() {
local cfg="$1"
local mode="$2"
@@ -18,7 +62,6 @@ vxlan_generic_setup() {
local port vid ttl tos mtu macaddr zone rxcsum txcsum
json_get_vars port vid ttl tos mtu macaddr zone rxcsum txcsum
-
proto_init_update "$link" 1
proto_add_tunnel
@@ -47,6 +90,9 @@ vxlan_generic_setup() {
proto_close_data
proto_send_update "$cfg"
+
+ config_load network
+ config_foreach proto_vxlan_setup_peer "vxlan_peer"
}
proto_vxlan_setup() {