diff options
| author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2019-09-18 15:17:56 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-01-31 17:24:31 +0100 |
| commit | 633c4304ad42d18d180ba65a264ba668de445d91 (patch) | |
| tree | 1957b969b3183d88165c2d1688032173dfd6c47c | |
| parent | 6c407fb5db02bc54de2098563c584509bec44432 (diff) | |
| download | upstream-633c4304ad42d18d180ba65a264ba668de445d91.tar.gz upstream-633c4304ad42d18d180ba65a264ba668de445d91.tar.bz2 upstream-633c4304ad42d18d180ba65a264ba668de445d91.zip | |
ath79: add support for Ubiquiti NanoStation Loco M (XW)
This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target (support was long ago available on ar71xx).
Specifications:
- AR9342 SoC @ 535 MHz
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- AR8032 switch
- 2T2R 5 GHz radio, 22 dBm
- 13 dBi built-in antenna
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via TFTP:
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
4 files changed, 39 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts new file mode 100644 index 0000000000..8fb05eda24 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9342_ubnt_xw.dtsi" + +/ { + compatible = "ubnt,nanostation-loco-m-xw", "ubnt,xw", "qca,ar9342"; + model = "Ubiquiti Nanostation Loco M (XW)"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0x1>; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "mii"; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy1>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 43c685b81c..15a467ccca 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -236,6 +236,7 @@ trendnet,tew-823dru) ;; ubnt,bullet-m|\ ubnt,bullet-m-xw|\ +ubnt,nanostation-loco-m-xw|\ ubnt,nanostation-m|\ ubnt,nanostation-m-xw|\ ubnt,rocket-m) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 15f2e18e0c..4630cf8447 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -46,6 +46,7 @@ ath79_setup_interfaces() ubnt,litebeam-ac-gen2|\ ubnt,nanobeam-ac|\ ubnt,nanostation-ac-loco|\ + ubnt,nanostation-loco-m-xw|\ ubnt,rocket-m|\ ubnt,unifiac-lite|\ ubnt,unifiac-lr|\ diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 49564201e2..ffae83eda5 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -179,6 +179,14 @@ define Device/ubnt_nanostation-ac-loco endef TARGET_DEVICES += ubnt_nanostation-ac-loco +define Device/ubnt_nanostation-loco-m-xw + $(Device/ubnt-xw) + DEVICE_MODEL := Nanostation Loco M + DEVICE_PACKAGES += rssileds + SUPPORTED_DEVICES += loco-m-xw +endef +TARGET_DEVICES += ubnt_nanostation-loco-m-xw + define Device/ubnt_nanostation-m $(Device/ubnt-xm) DEVICE_MODEL := Nanostation M |