ath79: add support for D-Link DAP-2660 A1

Specifications:
 * QCA9557, 16 MiB Flash, 128 MiB RAM, 802.11n 2T2R
 * QCA9882, 802.11ac 2T2R
 * Gigabit LAN Port (AR8035), 802.11af PoE

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>

7 files changed, 175 insertions, 0 deletions

diff --git a/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts b/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts
new file mode 100644
index 0000000000..1a2974a688
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+#include "qca95xx_dlink_dap-2xxx.dtsi"
+
+/ {
+	compatible = "dlink,dap-2660-a1", "qca,qca9557";
+	model = "D-Link DAP-2660 A1";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_red;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_red: power_red {
+			label = "red:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_green: power_green {
+			label = "green:power";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&partitions {
+	partition@70000 {
+		label = "firmware";
+		reg = <0x70000 0xee0000>;
+		compatible = "wrg";
+	};
+
+	partition@f50000 {
+		label = "dlink";
+		reg = <0xf50000 0xa0000>;
+		read-only;
+	};
+
+	art: partition@ff0000 {
+		label = "art";
+		reg = <0xff0000 0x10000>;
+		read-only;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@4 {
+		reg = <0x4>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	pll-data = <0x82000000 0x80000101 0x80001313>;
+
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+
+	gmac-config {
+		device = <&gmac>;
+		rgmii-enabled = <1>;
+		rxd-delay = <3>;
+		rxdv-delay = <3>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca95xx_dlink_dap-2xxx.dtsi b/target/linux/ath79/dts/qca95xx_dlink_dap-2xxx.dtsi
new file mode 100644
index 0000000000..82d50b85e8
--- /dev/null
+++ b/target/linux/ath79/dts/qca95xx_dlink_dap-2xxx.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "bdcfg";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "rgdb";
+				reg = <0x50000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "unused";
+				reg = <0x60000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 103da30379..3ea0815ff2 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -476,6 +476,10 @@ ath79_setup_macs()
 		lan_mac=$(mtd_get_mac_text "mp" 0x1)
 		label_mac=$lan_mac
 		;;
+	dlink,dap-2660-a1)
+		lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
+		label_mac=$lan_mac
+		;;
 	dlink,dap-2695-a1)
 		label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
 		;;
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 23cd4497ba..e492c5f542 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -52,6 +52,7 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
 		;;
+	dlink,dap-2660-a1|\
 	dlink,dap-2695-a1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b592da00e3..f382e255f1 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -22,6 +22,10 @@ case "$board" in
 	dlink,dch-g020-a1)
 		mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
 		;;
+	dlink,dap-2660-a1)
+		[ "$PHYNBR" -eq 1 ] && \
+			mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
+		;;
 	iodata,wn-ac1600dgr)
 		# There is no eeprom data for 5 GHz wlan in "art" partition
 		# which would allow to patch the macaddress
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
index 74c608b96d..9a2cca79a1 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
@@ -13,6 +13,7 @@ fixwrgg() {
 board=$(board_name)
 
 case "$board" in
+dlink,dap-2660-a1|\
 dlink,dap-2695-a1)
 	fixwrgg
 	;;
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 037d572d97..e1b0c4c1e1 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -738,6 +738,28 @@ define Device/dlink_dap-1365-a1
 endef
 TARGET_DEVICES += dlink_dap-1365-a1
 
+define Device/dlink_dap-2xxx
+  IMAGES += factory.img sysupgrade.bin
+  IMAGE/factory.img := append-kernel | pad-offset 6144k 160 | \
+	append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size
+  IMAGE/sysupgrade.bin := append-kernel | mkwrggimg | \
+	pad-to $$$$(BLOCKSIZE) | append-rootfs | append-metadata | check-size
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
+  KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
+endef
+
+define Device/dlink_dap-2660-a1
+  $(Device/dlink_dap-2xxx)
+  SOC := qca9557
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DAP-2660
+  DEVICE_VARIANT := A1
+  DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+  IMAGE_SIZE := 15232k
+  DAP_SIGNATURE := wapac09_dkbs_dap2660
+endef
+TARGET_DEVICES += dlink_dap-2660-a1
+
 define Device/dlink_dap-2695-a1
   SOC := qca9558
   DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct