ralink: add Wansview NCS601W IP Camera

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41453

6 files changed, 136 insertions, 0 deletions

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index d8bb095e45..b56fb63423 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -91,6 +91,7 @@ case "$FIRMWARE" in
 	mpr-a1 | \
 	mpr-a2 | \
 	pwh2004 | \
+	ncs601w | \
 	nbg-419n | \
 	nw718 | \
 	omni-emb | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 7612857844..4eef735d93 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -43,6 +43,7 @@ ramips_setup_interfaces()
 	all5003 | \
 	broadway | \
 	dcs-930| \
+	ncs601w | \
 	wnce2001)
 		ucidef_add_switch "switch0" "1" "0"
 		ucidef_set_interface_lan "eth0"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 697599341b..ca339b354c 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -301,6 +301,9 @@ ramips_board_detect() {
 	*"WRTNODE")
 		name="wrtnode"
 		;;
+	*"Wansview NCS601W")
+		name="ncs601w"
+		;;
 	*"Sercomm NA930")
 		name="na930"
 		;;
diff --git a/target/linux/ramips/dts/NCS601W.dts b/target/linux/ramips/dts/NCS601W.dts
new file mode 100644
index 0000000000..dcf0e727a9
--- /dev/null
+++ b/target/linux/ramips/dts/NCS601W.dts
@@ -0,0 +1,110 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "NCS601W", "ralink,rt5350-soc";
+	model = "Wansview NCS601W";
+
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "s25fl064k";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+/*	gpio-leds {
+		compatible = "gpio-leds";
+		system {
+			label = "mpr-a1:blue:system";
+			gpios = <&gpio0 20 1>;
+		};
+		power {
+			label = "mpr-a1:red:power";
+			gpios = <&gpio0 17 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		wps {
+			label = "reset";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 7 0>;
+		};
+		root_hub {
+			gpio-export,name = "root_hub";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 12 0>;
+		};
+	}; */
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index ec3ef75de3..5b23035b4e 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -449,6 +449,8 @@ Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
 
 Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
 
+Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
+
 nw718_mtd_size=3801088
 Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
 
@@ -596,6 +598,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/MPRA2,$(1))
 	$(call Image/Build/Profile/MZKW300NH2,$(1))
 	$(call Image/Build/Profile/NBG-419N,$(1))
+	$(call Image/Build/Profile/NCS601W,$(1))
 	$(call Image/Build/Profile/NW718,$(1))
 	$(call Image/Build/Profile/OMNI-EMB,$(1))
 	$(call Image/Build/Profile/PSR-680W,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/wansview.mk b/target/linux/ramips/rt305x/profiles/wansview.mk
new file mode 100644
index 0000000000..064cc0613d
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/wansview.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NCS601W
+	NAME:=Wansview NCS601W
+        PACKAGES:=kmod-video-core kmod-video-uvc \
+		kmod-usb-core kmod-usb-ohci
+endef
+
+define Profile/NCS601W/Description
+	Package set for Wansview NCS601W board
+endef
+
+$(eval $(call Profile,NCS601W))