aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-10-07 12:12:35 +0000
committerJohn Crispin <john@openwrt.org>2015-10-07 12:12:35 +0000
commit33f9165a6365d4e50c195734dbe11021db9c87af (patch)
tree0232d91ce076bc00aa189abac85b22e3124778d5
parent325a69486e3258447dd684aca621460e60ff2e16 (diff)
downloadupstream-33f9165a6365d4e50c195734dbe11021db9c87af.tar.gz
upstream-33f9165a6365d4e50c195734dbe11021db9c87af.tar.bz2
upstream-33f9165a6365d4e50c195734dbe11021db9c87af.zip
lantiq: spi driver fix
adds a missing wait busy. based on the UGW patch 2060.. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47158
-rw-r--r--target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch42
1 files changed, 28 insertions, 14 deletions
diff --git a/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
index 124b6c2341..13a1d9a9e9 100644
--- a/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ b/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
@@ -18,13 +18,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -626,6 +626,14 @@ config SPI_NUC900
+@@ -626,6 +626,14 @@
help
SPI driver for Nuvoton NUC900 series ARM SoCs
+config SPI_XWAY
-+ tristate "Lantiq XWAY SPI controller"
-+ depends on LANTIQ && SOC_TYPE_XWAY
++ tristate "Lantiq SPI controller"
++ depends on LANTIQ
+ select SPI_BITBANG
+ help
+ This driver supports the Lantiq SoC SPI controller in master
@@ -35,14 +35,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -90,3 +90,4 @@ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+@@ -90,3 +90,4 @@
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
+obj-$(CONFIG_SPI_XWAY) += spi-xway.o
--- /dev/null
+++ b/drivers/spi/spi-xway.c
-@@ -0,0 +1,975 @@
+@@ -0,0 +1,989 @@
+/*
+ * Lantiq SoC SPI controller
+ *
@@ -184,8 +184,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-+#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
++#define LTQ_SPI_IRNEN_T BIT(0) /* Transmit end interrupt request */
++#define LTQ_SPI_IRNEN_R BIT(1) /* Receive end interrupt request */
++#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
++#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
+#define LTQ_SPI_IRNEN_ALL 0xF
+
+struct ltq_spi {
@@ -214,6 +216,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ u16 rxfs;
+ unsigned dma_support:1;
+ unsigned cfg_mode:1;
++
++ u32 irnen_t;
++ u32 irnen_r;
+};
+
+static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
@@ -517,6 +522,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+{
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
+
++ if (ltq_spi_wait_ready(hw))
++ dev_err(&spi->dev, "wait failed\n");
++
+ switch (cs) {
+ case BITBANG_CS_ACTIVE:
+ ltq_spi_bits_per_word_set(spi);
@@ -547,8 +555,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ if (bits_per_word > 32)
+ return -EINVAL;
+
-+ ltq_spi_config_mode_set(hw);
-+
+ return 0;
+}
+
@@ -780,17 +786,17 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ if (hw->tx) {
+ /* Initially fill TX FIFO with as much data as possible */
+ ltq_spi_txfifo_write(hw);
-+ irq_flags |= LTQ_SPI_IRNEN_T;
++ irq_flags |= hw->irnen_t;
+
+ /* Always enable RX interrupt in Full Duplex mode */
+ if (hw->rx)
-+ irq_flags |= LTQ_SPI_IRNEN_R;
++ irq_flags |= hw->irnen_r;
+ } else if (hw->rx) {
+ /* Start RX clock */
+ ltq_spi_rxreq_set(hw);
+
+ /* Enable RX interrupt to receive data from RX FIFOs */
-+ irq_flags |= LTQ_SPI_IRNEN_R;
++ irq_flags |= hw->irnen_r;
+ }
+
+ /* Enable TX or RX interrupts */
@@ -895,10 +901,18 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
+ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
+
-+ if (of_machine_is_compatible("lantiq,ase"))
++ if (of_machine_is_compatible("lantiq,ase")) {
+ master->num_chipselect = 3;
-+ else
++
++ hw->irnen_t = LTQ_SPI_IRNEN_T_XWAY;
++ hw->irnen_r = LTQ_SPI_IRNEN_R_XWAY;
++ } else {
+ master->num_chipselect = 6;
++
++ hw->irnen_t = LTQ_SPI_IRNEN_T;
++ hw->irnen_r = LTQ_SPI_IRNEN_R;
++ }
++
+ master->bus_num = pdev->id;
+ master->setup = ltq_spi_setup;
+ master->cleanup = ltq_spi_cleanup;