Added initial support for at91 plaform (HCG)

SVN-Revision: 6508

5 files changed, 19627 insertions, 0 deletions

diff --git a/target/linux/at91-2.6/Makefile b/target/linux/at91-2.6/Makefile
new file mode 100644
index 0000000000..982a91139f
--- /dev/null
+++ b/target/linux/at91-2.6/Makefile
@@ -0,0 +1,24 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=at91
+BOARDNAME:=AT91
+FEATURES:=squashfs
+
+define Target/Description
+  Build fimware images for Figment Design Labs VersaLink board.
+endef
+
+include $(INCLUDE_DIR)/kernel-build.mk
+
+#include the profiles
+-include profiles/*.mk
+
+KERNELNAME:="uImage"
+$(eval $(call BuildKernel))
diff --git a/target/linux/at91-2.6/config/default b/target/linux/at91-2.6/config/default
new file mode 100644
index 0000000000..5e05d5e41d
--- /dev/null
+++ b/target/linux/at91-2.6/config/default
@@ -0,0 +1,310 @@
+# CONFIG_AEABI is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APM is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARM=y
+CONFIG_ARM_AT91_ETHER=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARPD is not set
+# CONFIG_ARTHUR is not set
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SPI=y
+CONFIG_AT91_SPIDEV=y
+# CONFIG_ATM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BONDING is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_BT is not set
+# CONFIG_CIFS is not set
+# CONFIG_CLS_U32_MARK is not set
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_CPU_32=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_TLB_V4WBI=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=m
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ALGAPI=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_KHAZAD is not set
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_DRIVER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DM9000 is not set
+CONFIG_DNOTIFY=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_HZ=100
+# CONFIG_I2C is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_INOTIFY is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_IPV6 is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+CONFIG_IP_NF_TARGET_LOG=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_ROUTE_FWMARK is not set
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_LEDS is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LLC2 is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_ONEARM is not set
+CONFIG_MACH_VLINK=y
+# CONFIG_MINIX_FS is not set
+CONFIG_MINI_FO=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_AT91_DATAFLASH=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_M25P80 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_RADIO is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NLS is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NVRAM is not set
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PCCARD is not set
+CONFIG_PHYLIB=y
+# CONFIG_PM is not set
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SMB_FS is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SOUND is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_UDF_FS is not set
+CONFIG_UID16=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XIP_KERNEL is not set
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=m
diff --git a/target/linux/at91-2.6/image/Makefile b/target/linux/at91-2.6/image/Makefile
new file mode 100644
index 0000000000..07660f2350
--- /dev/null
+++ b/target/linux/at91-2.6/image/Makefile
@@ -0,0 +1,36 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+TARGET_DEVICE_TABLE:=$(TOPDIR)/target/linux/vlink-2.6/image/device_table.txt
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Build/Clean
+endef
+
+define Image/Prepare
+  cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
+endef
+
+define Image/BuildKernel
+	cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1))
+endef
+
+define Image/Build/jffs2-64k
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=65536 conv=sync
+endef
+
+define Image/Build/jffs2-128k
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=131072 conv=sync
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/at91-2.6/patches/000-at91patches.patch b/target/linux/at91-2.6/patches/000-at91patches.patch
new file mode 100644
index 0000000000..a5581d2178
--- /dev/null
+++ b/target/linux/at91-2.6/patches/000-at91patches.patch
@@ -0,0 +1,19066 @@
+diff -urN -x CVS linux-2.6.19-final/arch/arm/Kconfig linux-2.6.19/arch/arm/Kconfig
+--- linux-2.6.19-final/arch/arm/Kconfig	Mon Dec  4 16:39:27 2006
++++ linux-2.6.19/arch/arm/Kconfig	Thu Nov 30 09:08:02 2006
+@@ -583,7 +591,7 @@
+ 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
+ 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
+ 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
+-		   ARCH_AT91RM9200 || MACH_TRIZEPS4
++		   ARCH_AT91 || MACH_TRIZEPS4
+ 	help
+ 	  If you say Y here, the LEDs on your machine will be used
+ 	  to provide useful information about your current system status.
+diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91rm9200dk_defconfig linux-2.6.19/arch/arm/configs/at91rm9200dk_defconfig
+--- linux-2.6.19-final/arch/arm/configs/at91rm9200dk_defconfig	Mon Dec  4 16:39:28 2006
++++ linux-2.6.19/arch/arm/configs/at91rm9200dk_defconfig	Mon Nov 20 10:46:02 2006
+@@ -357,9 +357,9 @@
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ CONFIG_MTD_PHYSMAP=y
+-CONFIG_MTD_PHYSMAP_START=0x10000000
+-CONFIG_MTD_PHYSMAP_LEN=0x200000
+-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++CONFIG_MTD_PHYSMAP_START=0
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+ # CONFIG_MTD_ARM_INTEGRATOR is not set
+ # CONFIG_MTD_IMPA7 is not set
+ # CONFIG_MTD_PLATRAM is not set
+@@ -585,7 +585,9 @@
+ # CONFIG_USBPCWATCHDOG is not set
+ # CONFIG_NVRAM is not set
+ # CONFIG_RTC is not set
+-CONFIG_AT91_RTC=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_AT91RM9200=y
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91rm9200ek_defconfig linux-2.6.19/arch/arm/configs/at91rm9200ek_defconfig
+--- linux-2.6.19-final/arch/arm/configs/at91rm9200ek_defconfig	Mon Dec  4 16:39:28 2006
++++ linux-2.6.19/arch/arm/configs/at91rm9200ek_defconfig	Mon Nov 20 10:45:49 2006
+@@ -348,9 +348,9 @@
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ CONFIG_MTD_PHYSMAP=y
+-CONFIG_MTD_PHYSMAP_START=0x10000000
+-CONFIG_MTD_PHYSMAP_LEN=0x800000
+-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++CONFIG_MTD_PHYSMAP_START=0
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+ # CONFIG_MTD_ARM_INTEGRATOR is not set
+ # CONFIG_MTD_IMPA7 is not set
+ # CONFIG_MTD_PLATRAM is not set
+@@ -566,7 +566,9 @@
+ # CONFIG_USBPCWATCHDOG is not set
+ # CONFIG_NVRAM is not set
+ # CONFIG_RTC is not set
+-CONFIG_AT91_RTC=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_AT91RM9200=y
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.19/arch/arm/configs/at91sam9260ek_defconfig
+--- linux-2.6.19-final/arch/arm/configs/at91sam9260ek_defconfig	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/configs/at91sam9260ek_defconfig	Mon Nov 20 10:51:08 2006
+@@ -0,0 +1,950 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.19-rc6
++# Fri Nov 17 18:42:21 2006
++#
++CONFIG_ARM=y
++# CONFIG_GENERIC_TIME is not set
++CONFIG_MMU=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++# CONFIG_RELAY is not set
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++CONFIG_ARCH_AT91SAM9260=y
++# CONFIG_ARCH_AT91SAM9261 is not set
++
++#
++# AT91SAM9260 Board Type
++#
++CONFIG_MACH_AT91SAM9260EK=y
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++
++#
++# Bus support
++#
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_XIP_KERNEL is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++# CONFIG_APM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++# CONFIG_MTD is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# I2O device support
++#
++
++#
++# Network device support
++#
++# CONFIG_NETDEVICES is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++
++#
++# Ftape, the floppy tape device driver
++#
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
++
++#
++# Misc devices
++#
++# CONFIG_TIFM_CORE is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_BANDWIDTH is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++# CONFIG_USB_AIPTEK is not set
++# CONFIG_USB_WACOM is not set
++# CONFIG_USB_ACECAD is not set
++# CONFIG_USB_KBTAB is not set
++# CONFIG_USB_POWERMATE is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
++# CONFIG_USB_XPAD is not set
++# CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++CONFIG_USB_ZERO=m
++# CONFIG_USB_ETH is not set
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++# CONFIG_NFS_FS is not set
++# CONFIG_NFSD is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_WAITQ is not set
++# CONFIG_DEBUG_ERRORS is not set
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
+diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.19/arch/arm/configs/at91sam9261ek_defconfig
+--- linux-2.6.19-final/arch/arm/configs/at91sam9261ek_defconfig	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/configs/at91sam9261ek_defconfig	Mon Nov 20 10:51:08 2006
+@@ -0,0 +1,1106 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.19-rc6
++# Fri Nov 17 18:00:38 2006
++#
++CONFIG_ARM=y
++# CONFIG_GENERIC_TIME is not set
++CONFIG_MMU=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++# CONFIG_RELAY is not set
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++CONFIG_ARCH_AT91SAM9261=y
++
++#
++# AT91SAM9261 Board Type
++#
++CONFIG_MACH_AT91SAM9261EK=y
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++
++#
++# Bus support
++#
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_XIP_KERNEL is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++# CONFIG_APM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++# CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# I2O device support
++#
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_SMC91X is not set
++CONFIG_DM9000=y
++
++#
++# Ethernet (1000 Mbit)
++#
++
++#
++# Ethernet (10000 Mbit)
++#
++
++#
++# Token Ring devices
++#
++
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++
++#
++# Ftape, the floppy tape device driver
++#
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_AT91=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_PCA is not set
++# CONFIG_I2C_PCA_ISA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
++
++#
++# Misc devices
++#
++# CONFIG_TIFM_CORE is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_BANDWIDTH is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++# CONFIG_USB_AIPTEK is not set
++# CONFIG_USB_WACOM is not set
++# CONFIG_USB_ACECAD is not set
++# CONFIG_USB_KBTAB is not set
++# CONFIG_USB_POWERMATE is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
++# CONFIG_USB_XPAD is not set
++# CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++CONFIG_USB_ZERO=m
++# CONFIG_USB_ETH is not set
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_AT91=m
++# CONFIG_MMC_TIFM_SD is not set
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++# CONFIG_NFS_FS is not set
++# CONFIG_NFSD is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_WAITQ is not set
++# CONFIG_DEBUG_ERRORS is not set
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
+diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/carmeva_defconfig linux-2.6.19/arch/arm/configs/carmeva_defconfig
+--- linux-2.6.19-final/arch/arm/configs/carmeva_defconfig	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/configs/carmeva_defconfig	Thu Oct 12 17:07:38 2006
+@@ -474,7 +474,7 @@
+ # CONFIG_WATCHDOG is not set
+ # CONFIG_NVRAM is not set
+ # CONFIG_RTC is not set
+-# CONFIG_AT91_RTC is not set
++# CONFIG_AT91RM9200_RTC is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/csb637_defconfig linux-2.6.19/arch/arm/configs/csb637_defconfig
+--- linux-2.6.19-final/arch/arm/configs/csb637_defconfig	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/configs/csb637_defconfig	Thu Oct 12 17:07:38 2006
+@@ -623,7 +623,7 @@
+ # CONFIG_USBPCWATCHDOG is not set
+ # CONFIG_NVRAM is not set
+ CONFIG_RTC=y
+-# CONFIG_AT91_RTC is not set
++# CONFIG_AT91RM9200_RTC is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/kb9202_defconfig linux-2.6.19/arch/arm/configs/kb9202_defconfig
+--- linux-2.6.19-final/arch/arm/configs/kb9202_defconfig	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/configs/kb9202_defconfig	Thu Oct 12 17:07:38 2006
+@@ -437,7 +437,7 @@
+ # CONFIG_WATCHDOG is not set
+ # CONFIG_NVRAM is not set
+ # CONFIG_RTC is not set
+-# CONFIG_AT91_RTC is not set
++# CONFIG_AT91RM9200_RTC is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Kconfig linux-2.6.19/arch/arm/mach-at91rm9200/Kconfig
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/Kconfig	Mon Dec  4 16:32:44 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/Kconfig	Wed Nov 22 09:24:11 2006
+@@ -2,7 +2,8 @@
+ 
+ menu "Atmel AT91 System-on-Chip"
+ 
+-comment "Atmel AT91 Processors"
++choice 
++	prompt "Atmel AT91 Processor"
+ 
+ config ARCH_AT91RM9200
+ 	bool "AT91RM9200"
+@@ -13,6 +14,8 @@
+ config ARCH_AT91SAM9261
+ 	bool "AT91SAM9261"
+ 
++endchoice
++
+ # ----------------------------------------------------------
+ 
+ if ARCH_AT91RM9200
+@@ -33,7 +36,6 @@
+ 	  Select this if you are using Atmel's AT91RM9200-DK Development board.
+ 	  (Discontinued)
+ 
+-
+ config MACH_AT91RM9200EK
+ 	bool "Atmel AT91RM9200-EK Evaluation Kit"
+ 	depends on ARCH_AT91RM9200
+@@ -90,6 +92,13 @@
+ 
+ comment "AT91SAM9260 Board Type"
+ 
++config MACH_AT91SAM9260EK
++	bool "Atmel AT91SAM9260-EK Evaluation Kit"
++	depends on ARCH_AT91SAM9260
++	help
++	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
++	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
++
+ endif
+ 
+ # ----------------------------------------------------------
+@@ -98,8 +107,31 @@
+ 
+ comment "AT91SAM9261 Board Type"
+ 
++config MACH_AT91SAM9261EK
++	bool "Atmel AT91SAM9261-EK Evaluation Kit"
++	depends on ARCH_AT91SAM9261
++	help
++	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
++	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
++
+ endif
+ 
++# ----------------------------------------------------------
++
++comment "AT91 Board Options"
++
++config MTD_AT91_DATAFLASH_CARD
++	bool "Enable DataFlash Card support"
++	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
++	help
++	  Enable support for the DataFlash card.
++
++config MTD_NAND_AT91_BUSWIDTH_16
++	bool "Enable 16-bit data bus interface to NAND flash"
++	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
++	help
++	  On AT91SAM926x boards both types of NAND flash can be present 
++	  (8 and 16 bit data bus width).
+ 
+ # ----------------------------------------------------------
+ 
+@@ -111,6 +143,13 @@
+ 	  Select this if you need to program one or more of the PCK0..PCK3
+ 	  programmable clock outputs.
+ 
++config AT91_SLOW_CLOCK
++	bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
++	depends on PM && EXPERIMENTAL
++	help
++	  Select this if you wish to put the CPU into slow clock mode
++	  while in the "Suspend to RAM" state, to save more power.
++
+ endmenu
+ 
+ endif
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Makefile linux-2.6.19/arch/arm/mach-at91rm9200/Makefile
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/Makefile	Mon Dec  4 16:32:44 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/Makefile	Thu Nov 16 11:45:54 2006
+@@ -2,19 +2,20 @@
+ # Makefile for the linux kernel.
+ #
+ 
+-obj-y		:= clock.o irq.o gpio.o devices.o
++obj-y		:= clock.o irq.o gpio.o
+ obj-m		:=
+ obj-n		:=
+ obj-		:=
+ 
+ obj-$(CONFIG_PM)		+= pm.o
++obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
+ 
+ # CPU-specific support
+-obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+-obj-$(CONFIG_ARCH_AT91SAM9260)	+=
+-obj-$(CONFIG_ARCH_AT91SAM9261)	+=
++obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
++obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
++obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+ 
+-# AT91RM9200 Board-specific support
++# AT91RM9200 board-specific support
+ obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
+ obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
+ obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
+@@ -26,8 +27,10 @@
+ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
+ 
+ # AT91SAM9260 board-specific support
++obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
+ 
+ # AT91SAM9261 board-specific support
++obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+ 
+ # LEDs support
+ led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
+@@ -39,7 +42,7 @@
+ obj-$(CONFIG_LEDS) += $(led-y)
+ 
+ # VGA support
+-#obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
++obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
+ 
+ 
+ ifeq ($(CONFIG_PM_DEBUG),y)
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200.c	Fri Nov  3 19:22:15 2006
+@@ -14,8 +14,10 @@
+ 
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
++#include <asm/arch/at91rm9200.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91_st.h>
+ 
+-#include <asm/hardware.h>
+ #include "generic.h"
+ #include "clock.h"
+ 
+@@ -26,32 +28,12 @@
+ 		.length		= SZ_4K,
+ 		.type		= MT_DEVICE,
+ 	}, {
+-		.virtual	= AT91_VA_BASE_SPI,
+-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_SPI),
+-		.length		= SZ_16K,
+-		.type		= MT_DEVICE,
+-	}, {
+ 		.virtual	= AT91_VA_BASE_EMAC,
+ 		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
+ 		.length		= SZ_16K,
+ 		.type		= MT_DEVICE,
+ 	}, {
+-		.virtual	= AT91_VA_BASE_TWI,
+-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_TWI),
+-		.length		= SZ_16K,
+-		.type		= MT_DEVICE,
+-	}, {
+-		.virtual	= AT91_VA_BASE_MCI,
+-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_MCI),
+-		.length		= SZ_16K,
+-		.type		= MT_DEVICE,
+-	}, {
+-		.virtual	= AT91_VA_BASE_UDP,
+-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_UDP),
+-		.length		= SZ_16K,
+-		.type		= MT_DEVICE,
+-	}, {
+-		.virtual	= AT91_SRAM_VIRT_BASE,
++		.virtual	= AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
+ 		.pfn		= __phys_to_pfn(AT91RM9200_SRAM_BASE),
+ 		.length		= AT91RM9200_SRAM_SIZE,
+ 		.type		= MT_DEVICE,
+@@ -222,6 +204,16 @@
+ 	}
+ };
+ 
++static void at91rm9200_reset(void)
++{
++	/*
++	 * Perform a hardware reset with the use of the Watchdog timer.
++	 */
++	at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
++	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
++}
++
++
+ /* --------------------------------------------------------------------
+  *  AT91RM9200 processor initialization
+  * -------------------------------------------------------------------- */
+@@ -230,6 +222,12 @@
+ 	/* Map peripherals */
+ 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+ 
++	at91_arch_reset = at91rm9200_reset;
++	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
++			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
++			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
++			| (1 << AT91RM9200_ID_IRQ6);
++
+ 	/* Init clock subsystem */
+ 	at91_clock_init(main_clock);
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_devices.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_devices.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_devices.c	Fri Dec  1 16:10:47 2006
+@@ -0,0 +1,901 @@
++/*
++ * arch/arm/mach-at91rm9200/at91rm9200_devices.c
++ *
++ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
++ *  Copyright (C) 2005 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++
++#include <linux/platform_device.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91rm9200.h>
++#include <asm/arch/at91rm9200_mc.h>
++
++#include "generic.h"
++
++#define SZ_512	0x00000200
++#define SZ_256	0x00000100
++#define SZ_16	0x00000010
++
++/* --------------------------------------------------------------------
++ *  USB Host
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
++static u64 ohci_dmamask = 0xffffffffUL;
++static struct at91_usbh_data usbh_data;
++
++static struct resource usbh_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_UHP_BASE,
++		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_UHP,
++		.end	= AT91RM9200_ID_UHP,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91rm9200_usbh_device = {
++	.name		= "at91_ohci",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &ohci_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &usbh_data,
++	},
++	.resource	= usbh_resources,
++	.num_resources	= ARRAY_SIZE(usbh_resources),
++};
++
++void __init at91_add_device_usbh(struct at91_usbh_data *data)
++{
++	if (!data)
++		return;
++
++	usbh_data = *data;
++	platform_device_register(&at91rm9200_usbh_device);
++}
++#else
++void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  USB Device (Gadget)
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_USB_GADGET_AT91
++static struct at91_udc_data udc_data;
++
++static struct resource udc_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_UDP,
++		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_UDP,
++		.end	= AT91RM9200_ID_UDP,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91rm9200_udc_device = {
++	.name		= "at91_udc",
++	.id		= -1,
++	.dev		= {
++				.platform_data		= &udc_data,
++	},
++	.resource	= udc_resources,
++	.num_resources	= ARRAY_SIZE(udc_resources),
++};
++
++void __init at91_add_device_udc(struct at91_udc_data *data)
++{
++	if (!data)
++		return;
++
++	if (data->vbus_pin) {
++		at91_set_gpio_input(data->vbus_pin, 0);
++		at91_set_deglitch(data->vbus_pin, 1);
++	}
++	if (data->pullup_pin)
++		at91_set_gpio_output(data->pullup_pin, 0);
++
++	udc_data = *data;
++	platform_device_register(&at91rm9200_udc_device);
++}
++#else
++void __init at91_add_device_udc(struct at91_udc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  Ethernet
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
++static u64 eth_dmamask = 0xffffffffUL;
++static struct eth_platform_data eth_data;
++
++static struct resource eth_resources[] = {
++	[0] = {
++		.start	= AT91_VA_BASE_EMAC,
++		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_EMAC,
++		.end	= AT91RM9200_ID_EMAC,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91rm9200_eth_device = {
++	.name		= "at91_ether",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &eth_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &eth_data,
++	},
++	.resource	= eth_resources,
++	.num_resources	= ARRAY_SIZE(eth_resources),
++};
++
++void __init at91_add_device_eth(struct eth_platform_data *data)
++{
++	if (!data)
++		return;
++
++	if (data->phy_irq_pin) {
++		at91_set_gpio_input(data->phy_irq_pin, 0);
++		at91_set_deglitch(data->phy_irq_pin, 1);
++	}
++
++	/* Pins used for MII and RMII */
++	at91_set_A_periph(AT91_PIN_PA16, 0);	/* EMDIO */
++	at91_set_A_periph(AT91_PIN_PA15, 0);	/* EMDC */
++	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERXER */
++	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
++	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
++	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ECRS_ECRSDV */
++	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX1 */
++	at91_set_A_periph(AT91_PIN_PA9, 0);	/* ETX0 */
++	at91_set_A_periph(AT91_PIN_PA8, 0);	/* ETXEN */
++	at91_set_A_periph(AT91_PIN_PA7, 0);	/* ETXCK_EREFCK */
++
++	if (!data->is_rmii) {
++		at91_set_B_periph(AT91_PIN_PB19, 0);	/* ERXCK */
++		at91_set_B_periph(AT91_PIN_PB18, 0);	/* ECOL */
++		at91_set_B_periph(AT91_PIN_PB17, 0);	/* ERXDV */
++		at91_set_B_periph(AT91_PIN_PB16, 0);	/* ERX3 */
++		at91_set_B_periph(AT91_PIN_PB15, 0);	/* ERX2 */
++		at91_set_B_periph(AT91_PIN_PB14, 0);	/* ETXER */
++		at91_set_B_periph(AT91_PIN_PB13, 0);	/* ETX3 */
++		at91_set_B_periph(AT91_PIN_PB12, 0);	/* ETX2 */
++	}
++
++	eth_data = *data;
++	platform_device_register(&at91rm9200_eth_device);
++}
++#else
++void __init at91_add_device_eth(struct eth_platform_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  Compact Flash / PCMCIA
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
++static struct at91_cf_data cf_data;
++
++#define CF_BASE		AT91_CHIPSELECT_4
++
++static struct resource cf_resources[] = {
++	[0] = {
++		.start	= CF_BASE,
++		/* ties up CS4, CS5 and CS6 */
++		.end	= CF_BASE + (0x30000000 - 1),
++		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
++	},
++};
++
++static struct platform_device at91rm9200_cf_device = {
++	.name		= "at91_cf",
++	.id		= -1,
++	.dev		= {
++				.platform_data		= &cf_data,
++	},
++	.resource	= cf_resources,
++	.num_resources	= ARRAY_SIZE(cf_resources),
++};
++
++void __init at91_add_device_cf(struct at91_cf_data *data)
++{
++	unsigned int csa;
++
++	if (!data)
++		return;
++
++	data->chipselect = 4;		/* can only use EBI ChipSelect 4 */
++
++	/* CF takes over CS4, CS5, CS6 */
++	csa = at91_sys_read(AT91_EBI_CSA);
++	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
++
++	/*
++	 * Static memory controller timing adjustments.
++	 * REVISIT:  these timings are in terms of MCK cycles, so
++	 * when MCK changes (cpufreq etc) so must these values...
++	 */
++	at91_sys_write(AT91_SMC_CSR(4),
++				  AT91_SMC_ACSS_STD
++				| AT91_SMC_DBW_16
++				| AT91_SMC_BAT
++				| AT91_SMC_WSEN
++				| AT91_SMC_NWS_(32)	/* wait states */
++				| AT91_SMC_RWSETUP_(6)	/* setup time */
++				| AT91_SMC_RWHOLD_(4)	/* hold time */
++	);
++
++	/* input/irq */
++	if (data->irq_pin) {
++		at91_set_gpio_input(data->irq_pin, 1);
++		at91_set_deglitch(data->irq_pin, 1);
++	}
++	at91_set_gpio_input(data->det_pin, 1);
++	at91_set_deglitch(data->det_pin, 1);
++
++	/* outputs, initially off */
++	if (data->vcc_pin)
++		at91_set_gpio_output(data->vcc_pin, 0);
++	at91_set_gpio_output(data->rst_pin, 0);
++
++	/* force poweron defaults for these pins ... */
++	at91_set_A_periph(AT91_PIN_PC9, 0);	/* A25/CFRNW */
++	at91_set_A_periph(AT91_PIN_PC10, 0);	/* NCS4/CFCS */
++	at91_set_A_periph(AT91_PIN_PC11, 0);	/* NCS5/CFCE1 */
++	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
++
++	/* nWAIT is _not_ a default setting */
++	at91_set_A_periph(AT91_PIN_PC6, 1);	/*  nWAIT */
++
++	cf_data = *data;
++	platform_device_register(&at91rm9200_cf_device);
++}
++#else
++void __init at91_add_device_cf(struct at91_cf_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  MMC / SD
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
++static u64 mmc_dmamask = 0xffffffffUL;
++static struct at91_mmc_data mmc_data;
++
++static struct resource mmc_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_MCI,
++		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_MCI,
++		.end	= AT91RM9200_ID_MCI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91rm9200_mmc_device = {
++	.name		= "at91_mci",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &mmc_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &mmc_data,
++	},
++	.resource	= mmc_resources,
++	.num_resources	= ARRAY_SIZE(mmc_resources),
++};
++
++void __init at91_add_device_mmc(struct at91_mmc_data *data)
++{
++	if (!data)
++		return;
++
++	/* input/irq */
++	if (data->det_pin) {
++		at91_set_gpio_input(data->det_pin, 1);
++		at91_set_deglitch(data->det_pin, 1);
++	}
++	if (data->wp_pin)
++		at91_set_gpio_input(data->wp_pin, 1);
++	if (data->vcc_pin)
++		at91_set_gpio_output(data->vcc_pin, 0);
++
++	/* CLK */
++	at91_set_A_periph(AT91_PIN_PA27, 0);
++
++	if (data->slot_b) {
++		/* CMD */
++		at91_set_B_periph(AT91_PIN_PA8, 1);
++
++		/* DAT0, maybe DAT1..DAT3 */
++		at91_set_B_periph(AT91_PIN_PA9, 1);
++		if (data->wire4) {
++			at91_set_B_periph(AT91_PIN_PA10, 1);
++			at91_set_B_periph(AT91_PIN_PA11, 1);
++			at91_set_B_periph(AT91_PIN_PA12, 1);
++		}
++	} else {
++		/* CMD */
++		at91_set_A_periph(AT91_PIN_PA28, 1);
++
++		/* DAT0, maybe DAT1..DAT3 */
++		at91_set_A_periph(AT91_PIN_PA29, 1);
++		if (data->wire4) {
++			at91_set_B_periph(AT91_PIN_PB3, 1);
++			at91_set_B_periph(AT91_PIN_PB4, 1);
++			at91_set_B_periph(AT91_PIN_PB5, 1);
++		}
++	}
++
++	mmc_data = *data;
++	platform_device_register(&at91rm9200_mmc_device);
++}
++#else
++void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  NAND / SmartMedia
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
++static struct at91_nand_data nand_data;
++
++#define NAND_BASE	AT91_CHIPSELECT_3
++
++static struct resource nand_resources[] = {
++	{
++		.start	= NAND_BASE,
++		.end	= NAND_BASE + SZ_8M - 1,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct platform_device at91rm9200_nand_device = {
++	.name		= "at91_nand",
++	.id		= -1,
++	.dev		= {
++				.platform_data	= &nand_data,
++	},
++	.resource	= nand_resources,
++	.num_resources	= ARRAY_SIZE(nand_resources),
++};
++
++void __init at91_add_device_nand(struct at91_nand_data *data)
++{
++	unsigned int csa;
++
++	if (!data)
++		return;
++
++	/* enable the address range of CS3 */
++	csa = at91_sys_read(AT91_EBI_CSA);
++	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
++
++	/* set the bus interface characteristics */
++	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
++		| AT91_SMC_NWS_(5)
++		| AT91_SMC_TDF_(1)
++		| AT91_SMC_RWSETUP_(0)	/* tDS Data Set up Time 30 - ns */
++		| AT91_SMC_RWHOLD_(1)	/* tDH Data Hold Time 20 - ns */
++	);
++
++	/* enable pin */
++	if (data->enable_pin)
++		at91_set_gpio_output(data->enable_pin, 1);
++
++	/* ready/busy pin */
++	if (data->rdy_pin)
++		at91_set_gpio_input(data->rdy_pin, 1);
++
++	/* card detect pin */
++	if (data->det_pin)
++		at91_set_gpio_input(data->det_pin, 1);
++
++	at91_set_A_periph(AT91_PIN_PC1, 0);		/* SMOE */
++	at91_set_A_periph(AT91_PIN_PC3, 0);		/* SMWE */
++
++	nand_data = *data;
++	platform_device_register(&at91rm9200_nand_device);
++}
++#else
++void __init at91_add_device_nand(struct at91_nand_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  TWI (i2c)
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
++
++static struct resource twi_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_TWI,
++		.end	= AT91RM9200_BASE_TWI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_TWI,
++		.end	= AT91RM9200_ID_TWI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91rm9200_twi_device = {
++	.name		= "at91_i2c",
++	.id		= -1,
++	.resource	= twi_resources,
++	.num_resources	= ARRAY_SIZE(twi_resources),
++};
++
++void __init at91_add_device_i2c(void)
++{
++	/* pins used for TWI interface */
++	at91_set_A_periph(AT91_PIN_PA25, 0);		/* TWD */
++	at91_set_multi_drive(AT91_PIN_PA25, 1);
++
++	at91_set_A_periph(AT91_PIN_PA26, 0);		/* TWCK */
++	at91_set_multi_drive(AT91_PIN_PA26, 1);
++
++	platform_device_register(&at91rm9200_twi_device);
++}
++#else
++void __init at91_add_device_i2c(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  SPI
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
++static u64 spi_dmamask = 0xffffffffUL;
++
++static struct resource spi_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_SPI,
++		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_SPI,
++		.end	= AT91RM9200_ID_SPI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91rm9200_spi_device = {
++	.name		= "at91_spi",
++	.id		= 0,
++	.dev		= {
++				.dma_mask		= &spi_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++	},
++	.resource	= spi_resources,
++	.num_resources	= ARRAY_SIZE(spi_resources),
++};
++
++static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
++
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
++{
++	int i;
++	unsigned long cs_pin;
++
++	at91_set_A_periph(AT91_PIN_PA0, 0);	/* MISO */
++	at91_set_A_periph(AT91_PIN_PA1, 0);	/* MOSI */
++	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPCK */
++
++	/* Enable SPI chip-selects */
++	for (i = 0; i < nr_devices; i++) {
++		if (devices[i].controller_data)
++			cs_pin = (unsigned long) devices[i].controller_data;
++		else
++			cs_pin = spi_standard_cs[devices[i].chip_select];
++
++#ifdef CONFIG_SPI_AT91_MANUAL_CS
++		at91_set_gpio_output(cs_pin, 1);
++#else
++		at91_set_A_periph(cs_pin, 0);
++#endif
++
++		/* pass chip-select pin to driver */
++		devices[i].controller_data = (void *) cs_pin;
++	}
++
++	spi_register_board_info(devices, nr_devices);
++	at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
++	platform_device_register(&at91rm9200_spi_device);
++}
++#else
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  RTC
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
++static struct platform_device at91rm9200_rtc_device = {
++	.name		= "at91_rtc",
++	.id		= -1,
++	.num_resources	= 0,
++};
++
++static void __init at91_add_device_rtc(void)
++{
++	platform_device_register(&at91rm9200_rtc_device);
++}
++#else
++static void __init at91_add_device_rtc(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  Watchdog
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
++static struct platform_device at91rm9200_wdt_device = {
++	.name		= "at91_wdt",
++	.id		= -1,
++	.num_resources	= 0,
++};
++
++static void __init at91_add_device_watchdog(void)
++{
++	platform_device_register(&at91rm9200_wdt_device);
++}
++#else
++static void __init at91_add_device_watchdog(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  LEDs
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_LEDS)
++u8 at91_leds_cpu;
++u8 at91_leds_timer;
++
++void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++{
++	at91_leds_cpu	= cpu_led;
++	at91_leds_timer	= timer_led;
++}
++#else
++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++#endif
++
++
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++	
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  UART
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SERIAL_ATMEL)
++static struct resource dbgu_resources[] = {
++	[0] = {
++		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
++		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91_ID_SYS,
++		.end	= AT91_ID_SYS,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data dbgu_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
++	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
++};
++
++static struct platform_device at91rm9200_dbgu_device = {
++	.name		= "atmel_usart",
++	.id		= 0,
++	.dev		= {
++				.platform_data	= &dbgu_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= dbgu_resources,
++	.num_resources	= ARRAY_SIZE(dbgu_resources),
++};
++
++static inline void configure_dbgu_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PA30, 0);		/* DRXD */
++	at91_set_A_periph(AT91_PIN_PA31, 1);		/* DTXD */
++}
++
++static struct resource uart0_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_US0,
++		.end	= AT91RM9200_BASE_US0 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_US0,
++		.end	= AT91RM9200_ID_US0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart0_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91rm9200_uart0_device = {
++	.name		= "atmel_usart",
++	.id		= 1,
++	.dev		= {
++				.platform_data	= &uart0_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart0_resources,
++	.num_resources	= ARRAY_SIZE(uart0_resources),
++};
++
++static inline void configure_usart0_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PA17, 1);		/* TXD0 */
++	at91_set_A_periph(AT91_PIN_PA18, 0);		/* RXD0 */
++	at91_set_A_periph(AT91_PIN_PA20, 0);		/* CTS0 */
++
++	/*
++	 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
++	 *  We need to drive the pin manually.  Default is off (RTS is active low).
++	 */
++	at91_set_gpio_output(AT91_PIN_PA21, 1);
++}
++
++static struct resource uart1_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_US1,
++		.end	= AT91RM9200_BASE_US1 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_US1,
++		.end	= AT91RM9200_ID_US1,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart1_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91rm9200_uart1_device = {
++	.name		= "atmel_usart",
++	.id		= 2,
++	.dev		= {
++				.platform_data	= &uart1_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart1_resources,
++	.num_resources	= ARRAY_SIZE(uart1_resources),
++};
++
++static inline void configure_usart1_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RI1 */
++	at91_set_A_periph(AT91_PIN_PB19, 0);		/* DTR1 */
++	at91_set_A_periph(AT91_PIN_PB20, 1);		/* TXD1 */
++	at91_set_A_periph(AT91_PIN_PB21, 0);		/* RXD1 */
++	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD1 */
++	at91_set_A_periph(AT91_PIN_PB24, 0);		/* CTS1 */
++	at91_set_A_periph(AT91_PIN_PB25, 0);		/* DSR1 */
++	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS1 */
++}
++
++static struct resource uart2_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_US2,
++		.end	= AT91RM9200_BASE_US2 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_US2,
++		.end	= AT91RM9200_ID_US2,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart2_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91rm9200_uart2_device = {
++	.name		= "atmel_usart",
++	.id		= 3,
++	.dev		= {
++				.platform_data	= &uart2_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart2_resources,
++	.num_resources	= ARRAY_SIZE(uart2_resources),
++};
++
++static inline void configure_usart2_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PA22, 0);		/* RXD2 */
++	at91_set_A_periph(AT91_PIN_PA23, 1);		/* TXD2 */
++}
++
++static struct resource uart3_resources[] = {
++	[0] = {
++		.start	= AT91RM9200_BASE_US3,
++		.end	= AT91RM9200_BASE_US3 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91RM9200_ID_US3,
++		.end	= AT91RM9200_ID_US3,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart3_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91rm9200_uart3_device = {
++	.name		= "atmel_usart",
++	.id		= 4,
++	.dev		= {
++				.platform_data	= &uart3_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart3_resources,
++	.num_resources	= ARRAY_SIZE(uart3_resources),
++};
++
++static inline void configure_usart3_pins(void)
++{
++	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
++	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
++}
++
++struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
++struct platform_device *atmel_default_console_device;	/* the serial console device */
++
++void __init at91_init_serial(struct at91_uart_config *config)
++{
++	int i;
++
++	/* Fill in list of supported UARTs */
++	for (i = 0; i < config->nr_tty; i++) {
++		switch (config->tty_map[i]) {
++			case 0:
++				configure_usart0_pins();
++				at91_uarts[i] = &at91rm9200_uart0_device;
++				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
++				break;
++			case 1:
++				configure_usart1_pins();
++				at91_uarts[i] = &at91rm9200_uart1_device;
++				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
++				break;
++			case 2:
++				configure_usart2_pins();
++				at91_uarts[i] = &at91rm9200_uart2_device;
++				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
++				break;
++			case 3:
++				configure_usart3_pins();
++				at91_uarts[i] = &at91rm9200_uart3_device;
++				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
++				break;
++			case 4:
++				configure_dbgu_pins();
++				at91_uarts[i] = &at91rm9200_dbgu_device;
++				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
++				break;
++			default:
++				continue;
++		}
++		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
++	}
++
++	/* Set serial console device */
++	if (config->console_tty < ATMEL_MAX_UART)
++		atmel_default_console_device = at91_uarts[config->console_tty];
++	if (!atmel_default_console_device)
++		printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
++void __init at91_add_device_serial(void)
++{
++	int i;
++
++	for (i = 0; i < ATMEL_MAX_UART; i++) {
++		if (at91_uarts[i])
++			platform_device_register(at91_uarts[i]);
++	}
++}
++#else
++void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_add_device_serial(void) {}
++#endif
++
++
++/* -------------------------------------------------------------------- */
++
++/*
++ * These devices are always present and don't need any board-specific
++ * setup.
++ */
++static int __init at91_add_standard_devices(void)
++{
++	at91_add_device_rtc();
++	at91_add_device_watchdog();
++	return 0;
++}
++
++arch_initcall(at91_add_standard_devices);
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_time.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_time.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_time.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_time.c	Thu Nov 16 11:41:09 2006
+@@ -30,6 +30,8 @@
+ #include <asm/io.h>
+ #include <asm/mach/time.h>
+ 
++#include <asm/arch/at91_st.h>
++
+ static unsigned long last_crtr;
+ 
+ /*
+@@ -99,6 +101,9 @@
+ 	/* Set Period Interval timer */
+ 	at91_sys_write(AT91_ST_PIMR, LATCH);
+ 
++	/* Clear any pending interrupts */
++	(void) at91_sys_read(AT91_ST_SR);
++
+ 	/* Enable Period Interval Timer interrupt */
+ 	at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
+ }
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260.c	Mon Nov 20 10:52:16 2006
+@@ -0,0 +1,294 @@
++/*
++ * arch/arm/mach-at91rm9200/at91sam9260.c
++ *
++ *  Copyright (C) 2006 SAN People
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/arch/at91sam9260.h>
++#include <asm/arch/at91_pmc.h>
++
++#include "generic.h"
++#include "clock.h"
++
++static struct map_desc at91sam9260_io_desc[] __initdata = {
++	{
++		.virtual	= AT91_VA_BASE_SYS,
++		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
++		.length		= SZ_16K,
++		.type		= MT_DEVICE,
++	}, {
++		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
++		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
++		.length		= AT91SAM9260_SRAM0_SIZE,
++		.type		= MT_DEVICE,
++	}, {
++		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
++		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
++		.length		= AT91SAM9260_SRAM1_SIZE,
++		.type		= MT_DEVICE,
++	},
++};
++
++/* --------------------------------------------------------------------
++ *  Clocks
++ * -------------------------------------------------------------------- */
++
++/*
++ * The peripheral clocks.
++ */
++static struct clk pioA_clk = {
++	.name		= "pioA_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_PIOA,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk pioB_clk = {
++	.name		= "pioB_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_PIOB,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk pioC_clk = {
++	.name		= "pioC_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_PIOC,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk adc_clk = {
++	.name		= "adc_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart0_clk = {
++	.name		= "usart0_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart1_clk = {
++	.name		= "usart1_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_US1,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart2_clk = {
++	.name		= "usart2_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_US2,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk mmc_clk = {
++	.name		= "mci_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_MCI,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk udc_clk = {
++	.name		= "udc_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_UDP,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk twi_clk = {
++	.name		= "twi_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_TWI,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi0_clk = {
++	.name		= "spi0_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_SPI0,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi1_clk = {
++	.name		= "spi1_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk ohci_clk = {
++	.name		= "ohci_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk ether_clk = {
++	.name		= "ether_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk isi_clk = {
++	.name		= "isi_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_ISI,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart3_clk = {
++	.name		= "usart3_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_US3,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart4_clk = {
++	.name		= "usart4_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_US4,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart5_clk = {
++	.name		= "usart5_clk",
++	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++
++static struct clk *periph_clocks[] __initdata = {
++	&pioA_clk,
++	&pioB_clk,
++	&pioC_clk,
++	&adc_clk,
++	&usart0_clk,
++	&usart1_clk,
++	&usart2_clk,
++	&mmc_clk,
++	&udc_clk,
++	&twi_clk,
++	&spi0_clk,
++	&spi1_clk,
++	// ssc
++	// tc0 .. tc2
++	&ohci_clk,
++	&ether_clk,
++	&isi_clk,
++	&usart3_clk,
++	&usart4_clk,
++	&usart5_clk,
++	// tc3 .. tc5
++	// irq0 .. irq2
++};
++
++/*
++ * The two programmable clocks.
++ * You must configure pin multiplexing to bring these signals out.
++ */
++static struct clk pck0 = {
++	.name		= "pck0",
++	.pmc_mask	= AT91_PMC_PCK0,
++	.type		= CLK_TYPE_PROGRAMMABLE,
++	.id		= 0,
++};
++static struct clk pck1 = {
++	.name		= "pck1",
++	.pmc_mask	= AT91_PMC_PCK1,
++	.type		= CLK_TYPE_PROGRAMMABLE,
++	.id		= 1,
++};
++
++static void __init at91sam9260_register_clocks(void)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
++		clk_register(periph_clocks[i]);
++
++	clk_register(&pck0);
++	clk_register(&pck1);
++}
++
++/* --------------------------------------------------------------------
++ *  GPIO
++ * -------------------------------------------------------------------- */
++
++static struct at91_gpio_bank at91sam9260_gpio[] = {
++	{
++		.id		= AT91SAM9260_ID_PIOA,
++		.offset		= AT91_PIOA,
++		.clock		= &pioA_clk,
++	}, {
++		.id		= AT91SAM9260_ID_PIOB,
++		.offset		= AT91_PIOB,
++		.clock		= &pioB_clk,
++	}, {
++		.id		= AT91SAM9260_ID_PIOC,
++		.offset		= AT91_PIOC,
++		.clock		= &pioC_clk,
++	}
++};
++
++static void at91sam9260_reset(void)
++{
++#warning "Implement CPU reset"
++}
++
++
++/* --------------------------------------------------------------------
++ *  AT91SAM9260 processor initialization
++ * -------------------------------------------------------------------- */
++
++void __init at91sam9260_initialize(unsigned long main_clock)
++{
++	/* Map peripherals */
++	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
++
++	at91_arch_reset = at91sam9260_reset;
++	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
++			| (1 << AT91SAM9260_ID_IRQ2);
++
++	/* Init clock subsystem */
++	at91_clock_init(main_clock);
++
++	/* Register the processor-specific clocks */
++	at91sam9260_register_clocks();
++
++	/* Register GPIO subsystem */
++	at91_gpio_init(at91sam9260_gpio, 3);
++}
++
++/* --------------------------------------------------------------------
++ *  Interrupt initialization
++ * -------------------------------------------------------------------- */
++
++/*
++ * The default interrupt priority levels (0 = lowest, 7 = highest).
++ */
++static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
++	7,	/* Advanced Interrupt Controller */
++	7,	/* System Peripherals */
++	0,	/* Parallel IO Controller A */
++	0,	/* Parallel IO Controller B */
++	0,	/* Parallel IO Controller C */
++	0,	/* Analog-to-Digital Converter */
++	6,	/* USART 0 */
++	6,	/* USART 1 */
++	6,	/* USART 2 */
++	0,	/* Multimedia Card Interface */
++	4,	/* USB Device Port */
++	0,	/* Two-Wire Interface */
++	6,	/* Serial Peripheral Interface 0 */
++	6,	/* Serial Peripheral Interface 1 */
++	5,	/* Serial Synchronous Controller */
++	0,
++	0,
++	0,	/* Timer Counter 0 */
++	0,	/* Timer Counter 1 */
++	0,	/* Timer Counter 2 */
++	3,	/* USB Host port */
++	3,	/* Ethernet */
++	0,	/* Image Sensor Interface */
++	6,	/* USART 3 */
++	6,	/* USART 4 */
++	6,	/* USART 5 */
++	0,	/* Timer Counter 3 */
++	0,	/* Timer Counter 4 */
++	0,	/* Timer Counter 5 */
++	0,	/* Advanced Interrupt Controller */
++	0,	/* Advanced Interrupt Controller */
++	0,	/* Advanced Interrupt Controller */
++};
++
++void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
++{
++	if (!priority)
++		priority = at91sam9260_default_irq_priority;
++
++	/* Initialize the AIC interrupt controller */
++	at91_aic_init(priority);
++
++	/* Enable GPIO interrupts */
++	at91_gpio_irq_setup();
++}
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260_devices.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260_devices.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260_devices.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260_devices.c	Thu Nov 23 16:37:24 2006
+@@ -0,0 +1,892 @@
++/*
++ * arch/arm/mach-at91rm9200/at91sam9260_devices.c
++ *
++ *  Copyright (C) 2006 Atmel
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++
++#include <linux/platform_device.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam9260.h>
++#include <asm/arch/at91sam926x_mc.h>
++
++#include "generic.h"
++
++#define SZ_512	0x00000200
++#define SZ_256	0x00000100
++#define SZ_16	0x00000010
++
++/* --------------------------------------------------------------------
++ *  USB Host
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
++static u64 ohci_dmamask = 0xffffffffUL;
++static struct at91_usbh_data usbh_data;
++
++static struct resource usbh_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_UHP_BASE,
++		.end	= AT91SAM9260_UHP_BASE + SZ_1M - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_UHP,
++		.end	= AT91SAM9260_ID_UHP,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91_usbh_device = {
++	.name		= "at91_ohci",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &ohci_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &usbh_data,
++	},
++	.resource	= usbh_resources,
++	.num_resources	= ARRAY_SIZE(usbh_resources),
++};
++
++void __init at91_add_device_usbh(struct at91_usbh_data *data)
++{
++	if (!data)
++		return;
++
++	usbh_data = *data;
++	platform_device_register(&at91_usbh_device);
++}
++#else
++void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  USB Device (Gadget)
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_USB_GADGET_AT91
++static struct at91_udc_data udc_data;
++
++static struct resource udc_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_UDP,
++		.end	= AT91SAM9260_BASE_UDP + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_UDP,
++		.end	= AT91SAM9260_ID_UDP,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91_udc_device = {
++	.name		= "at91_udc",
++	.id		= -1,
++	.dev		= {
++				.platform_data		= &udc_data,
++	},
++	.resource	= udc_resources,
++	.num_resources	= ARRAY_SIZE(udc_resources),
++};
++
++void __init at91_add_device_udc(struct at91_udc_data *data)
++{
++	if (!data)
++		return;
++
++	if (data->vbus_pin) {
++		at91_set_gpio_input(data->vbus_pin, 0);
++		at91_set_deglitch(data->vbus_pin, 1);
++	}
++
++	/* Pullup pin is handled internally by USB device peripheral */
++
++	udc_data = *data;
++	platform_device_register(&at91_udc_device);
++}
++#else
++void __init at91_add_device_udc(struct at91_udc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  Ethernet
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
++static u64 eth_dmamask = 0xffffffffUL;
++static struct eth_platform_data eth_data;
++
++static struct resource eth_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_EMAC,
++		.end	= AT91SAM9260_BASE_EMAC + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_EMAC,
++		.end	= AT91SAM9260_ID_EMAC,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9260_eth_device = {
++	.name		= "macb",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &eth_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &eth_data,
++	},
++	.resource	= eth_resources,
++	.num_resources	= ARRAY_SIZE(eth_resources),
++};
++
++void __init at91_add_device_eth(struct eth_platform_data *data)
++{
++	if (!data)
++		return;
++
++	if (data->phy_irq_pin) {
++		at91_set_gpio_input(data->phy_irq_pin, 0);
++		at91_set_deglitch(data->phy_irq_pin, 1);
++	}
++
++	/* Pins used for MII and RMII */
++	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
++	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
++	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
++	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
++	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
++	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
++	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
++	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
++	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
++	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
++
++	if (!data->is_rmii) {
++		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
++		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
++		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
++		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
++		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
++		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
++		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
++		at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
++	}
++
++	eth_data = *data;
++	platform_device_register(&at91sam9260_eth_device);
++}
++#else
++void __init at91_add_device_eth(struct eth_platform_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  MMC / SD
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
++static u64 mmc_dmamask = 0xffffffffUL;
++static struct at91_mmc_data mmc_data;
++
++static struct resource mmc_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_MCI,
++		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_MCI,
++		.end	= AT91SAM9260_ID_MCI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9260_mmc_device = {
++	.name		= "at91_mci",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &mmc_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &mmc_data,
++	},
++	.resource	= mmc_resources,
++	.num_resources	= ARRAY_SIZE(mmc_resources),
++};
++
++void __init at91_add_device_mmc(struct at91_mmc_data *data)
++{
++	if (!data)
++		return;
++
++	/* input/irq */
++	if (data->det_pin) {
++		at91_set_gpio_input(data->det_pin, 1);
++		at91_set_deglitch(data->det_pin, 1);
++	}
++	if (data->wp_pin)
++		at91_set_gpio_input(data->wp_pin, 1);
++	if (data->vcc_pin)
++		at91_set_gpio_output(data->vcc_pin, 0);
++
++	/* CLK */
++	at91_set_A_periph(AT91_PIN_PA8, 0);
++	
++	if (data->slot_b) {
++		/* CMD */
++		at91_set_B_periph(AT91_PIN_PA1, 1);
++
++		/* DAT0, maybe DAT1..DAT3 */
++		at91_set_B_periph(AT91_PIN_PA0, 1);
++		if (data->wire4) {
++			at91_set_B_periph(AT91_PIN_PA5, 1);
++			at91_set_B_periph(AT91_PIN_PA4, 1);
++			at91_set_B_periph(AT91_PIN_PA3, 1);
++		}
++	} else {
++		/* CMD */
++		at91_set_A_periph(AT91_PIN_PA7, 1);
++
++		/* DAT0, maybe DAT1..DAT3 */
++		at91_set_A_periph(AT91_PIN_PA6, 1);
++		if (data->wire4) {
++			at91_set_A_periph(AT91_PIN_PA9, 1);
++			at91_set_A_periph(AT91_PIN_PA10, 1);
++			at91_set_A_periph(AT91_PIN_PA11, 1);
++		}
++	}
++	
++	mmc_data = *data;
++	platform_device_register(&at91sam9260_mmc_device);
++}
++#else
++void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  NAND / SmartMedia
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
++static struct at91_nand_data nand_data;
++
++#define NAND_BASE	AT91_CHIPSELECT_3
++
++static struct resource nand_resources[] = {
++	{
++		.start	= NAND_BASE,
++		.end	= NAND_BASE + SZ_8M - 1,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct platform_device at91sam9260_nand_device = {
++	.name		= "at91_nand",
++	.id		= -1,
++	.dev		= {
++				.platform_data	= &nand_data,
++	},
++	.resource	= nand_resources,
++	.num_resources	= ARRAY_SIZE(nand_resources),
++};
++
++void __init at91_add_device_nand(struct at91_nand_data *data)
++{
++	unsigned long csa, mode;
++
++	if (!data)
++		return;
++
++	csa = at91_sys_read(AT91_MATRIX_EBICSA);
++	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
++
++	/* set the bus interface characteristics */
++	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
++			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
++
++	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
++			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
++
++	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
++
++	if (data->bus_width_16)
++		mode = AT91_SMC_DBW_16;
++	else
++		mode = AT91_SMC_DBW_8;
++	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
++
++	/* enable pin */
++	if (data->enable_pin)
++		at91_set_gpio_output(data->enable_pin, 1);
++
++	/* ready/busy pin */
++	if (data->rdy_pin)
++		at91_set_gpio_input(data->rdy_pin, 1);
++
++	/* card detect pin */
++	if (data->det_pin)
++		at91_set_gpio_input(data->det_pin, 1);
++
++	nand_data = *data;
++	platform_device_register(&at91sam9260_nand_device);
++}
++#else
++void __init at91_add_device_nand(struct at91_nand_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  TWI (i2c)
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
++
++static struct resource twi_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_TWI,
++		.end	= AT91SAM9260_BASE_TWI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_TWI,
++		.end	= AT91SAM9260_ID_TWI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9260_twi_device = {
++	.name		= "at91_i2c",
++	.id		= -1,
++	.resource	= twi_resources,
++	.num_resources	= ARRAY_SIZE(twi_resources),
++};
++
++void __init at91_add_device_i2c(void)
++{
++	/* pins used for TWI interface */
++	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
++	at91_set_multi_drive(AT91_PIN_PA23, 1);
++
++	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
++	at91_set_multi_drive(AT91_PIN_PA24, 1);
++
++	platform_device_register(&at91sam9260_twi_device);
++}
++#else
++void __init at91_add_device_i2c(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  SPI
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
++static u64 spi_dmamask = 0xffffffffUL;
++
++static struct resource spi0_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_SPI0,
++		.end	= AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_SPI0,
++		.end	= AT91SAM9260_ID_SPI0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9260_spi0_device = {
++	.name		= "atmel_spi",
++	.id		= 0,
++	.dev		= {
++				.dma_mask		= &spi_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++	},
++	.resource	= spi0_resources,
++	.num_resources	= ARRAY_SIZE(spi0_resources),
++};
++
++static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
++
++static struct resource spi1_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_SPI1,
++		.end	= AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_SPI1,
++		.end	= AT91SAM9260_ID_SPI1,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9260_spi1_device = {
++	.name		= "atmel_spi",
++	.id		= 1,
++	.dev		= {
++				.dma_mask		= &spi_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++	},
++	.resource	= spi1_resources,
++	.num_resources	= ARRAY_SIZE(spi1_resources),
++};
++
++static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
++
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
++{
++	int i;
++	unsigned long cs_pin;
++	short enable_spi0 = 0;
++	short enable_spi1 = 0;
++
++	/* Choose SPI chip-selects */
++	for (i = 0; i < nr_devices; i++) {
++		if (devices[i].controller_data)
++			cs_pin = (unsigned long) devices[i].controller_data;
++		else if (devices[i].bus_num == 0)
++			cs_pin = spi0_standard_cs[devices[i].chip_select];
++		else
++			cs_pin = spi1_standard_cs[devices[i].chip_select];
++
++		if (devices[i].bus_num == 0)
++			enable_spi0 = 1;
++		else
++			enable_spi1 = 1;
++
++		/* enable chip-select pin */
++		at91_set_gpio_output(cs_pin, 1);
++
++		/* pass chip-select pin to driver */
++		devices[i].controller_data = (void *) cs_pin;
++	}
++
++	spi_register_board_info(devices, nr_devices);
++
++	/* Configure SPI bus(es) */
++	if (enable_spi0) {
++		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
++		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
++		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
++
++		at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
++		platform_device_register(&at91sam9260_spi0_device);
++	}
++	if (enable_spi1) {
++		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI1_MISO */
++		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
++		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
++
++		at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
++		platform_device_register(&at91sam9260_spi1_device);
++	}
++}
++#else
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  LEDs
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_LEDS)
++u8 at91_leds_cpu;
++u8 at91_leds_timer;
++
++void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++{
++	at91_leds_cpu	= cpu_led;
++	at91_leds_timer	= timer_led;
++}
++#else
++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++#endif
++
++
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  UART
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_SERIAL_ATMEL)
++static struct resource dbgu_resources[] = {
++	[0] = {
++		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
++		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91_ID_SYS,
++		.end	= AT91_ID_SYS,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data dbgu_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
++	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
++};
++
++static struct platform_device at91sam9260_dbgu_device = {
++	.name		= "atmel_usart",
++	.id		= 0,
++	.dev		= {
++				.platform_data	= &dbgu_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= dbgu_resources,
++	.num_resources	= ARRAY_SIZE(dbgu_resources),
++};
++
++static inline void configure_dbgu_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
++	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
++}
++
++static struct resource uart0_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_US0,
++		.end	= AT91SAM9260_BASE_US0 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_US0,
++		.end	= AT91SAM9260_ID_US0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart0_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9260_uart0_device = {
++	.name		= "atmel_usart",
++	.id		= 1,
++	.dev		= {
++				.platform_data	= &uart0_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart0_resources,
++	.num_resources	= ARRAY_SIZE(uart0_resources),
++};
++
++static inline void configure_usart0_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
++	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
++	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS0 */
++	at91_set_A_periph(AT91_PIN_PB27, 0);		/* CTS0 */
++	at91_set_A_periph(AT91_PIN_PB24, 0);		/* DTR0 */
++	at91_set_A_periph(AT91_PIN_PB22, 0);		/* DSR0 */
++	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD0 */
++	at91_set_A_periph(AT91_PIN_PB25, 0);		/* RI0 */
++}
++
++static struct resource uart1_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_US1,
++		.end	= AT91SAM9260_BASE_US1 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_US1,
++		.end	= AT91SAM9260_ID_US1,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart1_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9260_uart1_device = {
++	.name		= "atmel_usart",
++	.id		= 2,
++	.dev		= {
++				.platform_data	= &uart1_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart1_resources,
++	.num_resources	= ARRAY_SIZE(uart1_resources),
++};
++
++static inline void configure_usart1_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
++	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
++	at91_set_A_periph(AT91_PIN_PB28, 0);		/* RTS1 */
++	at91_set_A_periph(AT91_PIN_PB29, 0);		/* CTS1 */
++}
++
++static struct resource uart2_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_US2,
++		.end	= AT91SAM9260_BASE_US2 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_US2,
++		.end	= AT91SAM9260_ID_US2,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart2_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9260_uart2_device = {
++	.name		= "atmel_usart",
++	.id		= 3,
++	.dev		= {
++				.platform_data	= &uart2_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart2_resources,
++	.num_resources	= ARRAY_SIZE(uart2_resources),
++};
++
++static inline void configure_usart2_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
++	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
++}
++
++static struct resource uart3_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_US3,
++		.end	= AT91SAM9260_BASE_US3 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_US3,
++		.end	= AT91SAM9260_ID_US3,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart3_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9260_uart3_device = {
++	.name		= "atmel_usart",
++	.id		= 4,
++	.dev		= {
++				.platform_data	= &uart3_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart3_resources,
++	.num_resources	= ARRAY_SIZE(uart3_resources),
++};
++
++static inline void configure_usart3_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PB10, 1);		/* TXD3 */
++	at91_set_A_periph(AT91_PIN_PB11, 0);		/* RXD3 */
++}
++
++static struct resource uart4_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_US4,
++		.end	= AT91SAM9260_BASE_US4 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_US4,
++		.end	= AT91SAM9260_ID_US4,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart4_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9260_uart4_device = {
++	.name		= "atmel_usart",
++	.id		= 5,
++	.dev		= {
++				.platform_data	= &uart4_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart4_resources,
++	.num_resources	= ARRAY_SIZE(uart4_resources),
++};
++
++static inline void configure_usart4_pins(void)
++{
++	at91_set_B_periph(AT91_PIN_PA31, 1);		/* TXD4 */
++	at91_set_B_periph(AT91_PIN_PA30, 0);		/* RXD4 */
++}
++
++static struct resource uart5_resources[] = {
++	[0] = {
++		.start	= AT91SAM9260_BASE_US5,
++		.end	= AT91SAM9260_BASE_US5 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9260_ID_US5,
++		.end	= AT91SAM9260_ID_US5,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart5_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9260_uart5_device = {
++	.name		= "atmel_usart",
++	.id		= 6,
++	.dev		= {
++				.platform_data	= &uart5_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart5_resources,
++	.num_resources	= ARRAY_SIZE(uart5_resources),
++};
++
++static inline void configure_usart5_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PB12, 1);		/* TXD5 */
++	at91_set_A_periph(AT91_PIN_PB13, 0);		/* RXD5 */
++}
++
++struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
++struct platform_device *atmel_default_console_device;	/* the serial console device */
++
++void __init at91_init_serial(struct at91_uart_config *config)
++{
++	int i;
++
++	/* Fill in list of supported UARTs */
++	for (i = 0; i < config->nr_tty; i++) {
++		switch (config->tty_map[i]) {
++			case 0:
++				configure_usart0_pins();
++				at91_uarts[i] = &at91sam9260_uart0_device;
++				at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
++				break;
++			case 1:
++				configure_usart1_pins();
++				at91_uarts[i] = &at91sam9260_uart1_device;
++				at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
++				break;
++			case 2:
++				configure_usart2_pins();
++				at91_uarts[i] = &at91sam9260_uart2_device;
++				at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
++				break;
++			case 3:
++				configure_usart3_pins();
++				at91_uarts[i] = &at91sam9260_uart3_device;
++				at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
++				break;
++			case 4:
++				configure_usart4_pins();
++				at91_uarts[i] = &at91sam9260_uart4_device;
++				at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
++				break;
++			case 5:
++				configure_usart5_pins();
++				at91_uarts[i] = &at91sam9260_uart5_device;
++				at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
++				break;
++			case 6:
++				configure_dbgu_pins();
++				at91_uarts[i] = &at91sam9260_dbgu_device;
++				at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
++				break;
++			default:
++				continue;
++		}
++		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
++	}
++
++	/* Set serial console device */
++	if (config->console_tty < ATMEL_MAX_UART)
++		atmel_default_console_device = at91_uarts[config->console_tty];
++	if (!atmel_default_console_device)
++		printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
++void __init at91_add_device_serial(void)
++{
++	int i;
++
++	for (i = 0; i < ATMEL_MAX_UART; i++) {
++		if (at91_uarts[i])
++			platform_device_register(at91_uarts[i]);
++	}
++}
++#else
++void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_add_device_serial(void) {}
++#endif
++
++
++/* -------------------------------------------------------------------- */
++/*
++ * These devices are always present and don't need any board-specific
++ * setup.
++ */
++static int __init at91_add_standard_devices(void)
++{
++	return 0;
++}
++
++arch_initcall(at91_add_standard_devices);
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261.c	Thu Nov 23 15:41:39 2006
+@@ -0,0 +1,289 @@
++/*
++ * arch/arm/mach-at91rm9200/at91sam9261.c
++ *
++ *  Copyright (C) 2005 SAN People
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/arch/at91sam9261.h>
++#include <asm/arch/at91_pmc.h>
++
++#include "generic.h"
++#include "clock.h"
++
++static struct map_desc at91sam9261_io_desc[] __initdata = {
++	{
++		.virtual	= AT91_VA_BASE_SYS,
++		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
++		.length		= SZ_16K,
++		.type		= MT_DEVICE,
++	}, {
++		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
++		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
++		.length		= AT91SAM9261_SRAM_SIZE,
++		.type		= MT_DEVICE,
++	},
++};
++
++/* --------------------------------------------------------------------
++ *  Clocks
++ * -------------------------------------------------------------------- */
++
++/*
++ * The peripheral clocks.
++ */
++static struct clk pioA_clk = {
++	.name		= "pioA_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_PIOA,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk pioB_clk = {
++	.name		= "pioB_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_PIOB,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk pioC_clk = {
++	.name		= "pioC_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_PIOC,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart0_clk = {
++	.name		= "usart0_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_US0,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart1_clk = {
++	.name		= "usart1_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_US1,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart2_clk = {
++	.name		= "usart2_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_US2,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk mmc_clk = {
++	.name		= "mci_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_MCI,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk udc_clk = {
++	.name		= "udc_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_UDP,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk twi_clk = {
++	.name		= "twi_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_TWI,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi0_clk = {
++	.name		= "spi0_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_SPI0,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi1_clk = {
++	.name		= "spi1_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk ohci_clk = {
++	.name		= "ohci_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++static struct clk lcdc_clk = {
++	.name		= "lcdc_clk",
++	.pmc_mask	= 1 << AT91SAM9261_ID_LCDC,
++	.type		= CLK_TYPE_PERIPHERAL,
++};
++
++static struct clk *periph_clocks[] __initdata = {
++	&pioA_clk,
++	&pioB_clk,
++	&pioC_clk,
++	&usart0_clk,
++	&usart1_clk,
++	&usart2_clk,
++	&mmc_clk,
++	&udc_clk,
++	&twi_clk,
++	&spi0_clk,
++	&spi1_clk,
++	// ssc 0 .. ssc2
++	// tc0 .. tc2
++	&ohci_clk,
++	&lcdc_clk,
++	// irq0 .. irq2
++};
++
++/*
++ * The four programmable clocks.
++ * You must configure pin multiplexing to bring these signals out.
++ */
++static struct clk pck0 = {
++	.name		= "pck0",
++	.pmc_mask	= AT91_PMC_PCK0,
++	.type		= CLK_TYPE_PROGRAMMABLE,
++	.id		= 0,
++};
++static struct clk pck1 = {
++	.name		= "pck1",
++	.pmc_mask	= AT91_PMC_PCK1,
++	.type		= CLK_TYPE_PROGRAMMABLE,
++	.id		= 1,
++};
++static struct clk pck2 = {
++	.name		= "pck2",
++	.pmc_mask	= AT91_PMC_PCK2,
++	.type		= CLK_TYPE_PROGRAMMABLE,
++	.id		= 2,
++};
++static struct clk pck3 = {
++	.name		= "pck3",
++	.pmc_mask	= AT91_PMC_PCK3,
++	.type		= CLK_TYPE_PROGRAMMABLE,
++	.id		= 3,
++};
++
++/* HClocks */
++static struct clk hck0 = {
++	.name		= "hck0",
++	.pmc_mask	= AT91_PMC_HCK0,
++	.type		= CLK_TYPE_SYSTEM,
++	.id		= 0,
++};
++static struct clk hck1 = {
++	.name		= "hck1",
++	.pmc_mask	= AT91_PMC_HCK1,
++	.type		= CLK_TYPE_SYSTEM,
++	.id		= 1,
++};
++
++static void __init at91sam9261_register_clocks(void)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
++		clk_register(periph_clocks[i]);
++
++	clk_register(&pck0);
++	clk_register(&pck1);
++	clk_register(&pck2);
++	clk_register(&pck3);
++
++	clk_register(&hck0);
++	clk_register(&hck1);
++}
++
++/* --------------------------------------------------------------------
++ *  GPIO
++ * -------------------------------------------------------------------- */
++
++static struct at91_gpio_bank at91sam9261_gpio[] = {
++	{
++		.id		= AT91SAM9261_ID_PIOA,
++		.offset		= AT91_PIOA,
++		.clock		= &pioA_clk,
++	}, {
++		.id		= AT91SAM9261_ID_PIOB,
++		.offset		= AT91_PIOB,
++		.clock		= &pioB_clk,
++	}, {
++		.id		= AT91SAM9261_ID_PIOC,
++		.offset		= AT91_PIOC,
++		.clock		= &pioC_clk,
++	}
++};
++
++static void at91sam9261_reset(void)
++{
++#warning "Implement CPU reset"
++}
++
++
++/* --------------------------------------------------------------------
++ *  AT91SAM9261 processor initialization
++ * -------------------------------------------------------------------- */
++
++void __init at91sam9261_initialize(unsigned long main_clock)
++{
++	/* Map peripherals */
++	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
++
++	at91_arch_reset = at91sam9261_reset;
++	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
++			| (1 << AT91SAM9261_ID_IRQ2);
++
++	/* Init clock subsystem */
++	at91_clock_init(main_clock);
++
++	/* Register the processor-specific clocks */
++	at91sam9261_register_clocks();
++
++	/* Register GPIO subsystem */
++	at91_gpio_init(at91sam9261_gpio, 3);
++}
++
++/* --------------------------------------------------------------------
++ *  Interrupt initialization
++ * -------------------------------------------------------------------- */
++
++/*
++ * The default interrupt priority levels (0 = lowest, 7 = highest).
++ */
++static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
++	7,	/* Advanced Interrupt Controller */
++	7,	/* System Peripherals */
++	0,	/* Parallel IO Controller A */
++	0,	/* Parallel IO Controller B */
++	0,	/* Parallel IO Controller C */
++	0,
++	6,	/* USART 0 */
++	6,	/* USART 1 */
++	6,	/* USART 2 */
++	0,	/* Multimedia Card Interface */
++	4,	/* USB Device Port */
++	0,	/* Two-Wire Interface */
++	6,	/* Serial Peripheral Interface 0 */
++	6,	/* Serial Peripheral Interface 1 */
++	5,	/* Serial Synchronous Controller 0 */
++	5,	/* Serial Synchronous Controller 1 */
++	5,	/* Serial Synchronous Controller 2 */
++	0,	/* Timer Counter 0 */
++	0,	/* Timer Counter 1 */
++	0,	/* Timer Counter 2 */
++	3,	/* USB Host port */
++	3,	/* LCD Controller */
++	0,
++	0,
++	0,
++	0,
++	0,
++	0,
++	0,
++	0,	/* Advanced Interrupt Controller */
++	0,	/* Advanced Interrupt Controller */
++	0,	/* Advanced Interrupt Controller */
++};
++
++void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
++{
++	if (!priority)
++		priority = at91sam9261_default_irq_priority;
++
++	/* Initialize the AIC interrupt controller */
++	at91_aic_init(priority);
++
++	/* Enable GPIO interrupts */
++	at91_gpio_irq_setup();
++}
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261_devices.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261_devices.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261_devices.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261_devices.c	Sat Nov 25 11:14:00 2006
+@@ -0,0 +1,767 @@
++/*
++ * arch/arm/mach-at91rm9200/at91sam9261_devices.c
++ *
++ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
++ *  Copyright (C) 2005 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++
++#include <linux/platform_device.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam9261.h>
++#include <asm/arch/at91sam9261_matrix.h>
++#include <asm/arch/at91sam926x_mc.h>
++
++#include "generic.h"
++
++#define SZ_512	0x00000200
++#define SZ_256	0x00000100
++#define SZ_16	0x00000010
++
++/* --------------------------------------------------------------------
++ *  USB Host
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
++static u64 ohci_dmamask = 0xffffffffUL;
++static struct at91_usbh_data usbh_data;
++
++static struct resource usbh_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_UHP_BASE,
++		.end	= AT91SAM9261_UHP_BASE + SZ_1M - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_UHP,
++		.end	= AT91SAM9261_ID_UHP,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9261_usbh_device = {
++	.name		= "at91_ohci",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &ohci_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &usbh_data,
++	},
++	.resource	= usbh_resources,
++	.num_resources	= ARRAY_SIZE(usbh_resources),
++};
++
++void __init at91_add_device_usbh(struct at91_usbh_data *data)
++{
++	if (!data)
++		return;
++
++	usbh_data = *data;
++	platform_device_register(&at91sam9261_usbh_device);
++}
++#else
++void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  USB Device (Gadget)
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_USB_GADGET_AT91
++static struct at91_udc_data udc_data;
++
++static struct resource udc_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_UDP,
++		.end	= AT91SAM9261_BASE_UDP + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_UDP,
++		.end	= AT91SAM9261_ID_UDP,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9261_udc_device = {
++	.name		= "at91_udc",
++	.id		= -1,
++	.dev		= {
++				.platform_data		= &udc_data,
++	},
++	.resource	= udc_resources,
++	.num_resources	= ARRAY_SIZE(udc_resources),
++};
++
++void __init at91_add_device_udc(struct at91_udc_data *data)
++{
++	unsigned long x;
++
++	if (!data)
++		return;
++
++	if (data->vbus_pin) {
++		at91_set_gpio_input(data->vbus_pin, 0);
++		at91_set_deglitch(data->vbus_pin, 1);
++	}
++
++	/* Pullup pin is handled internally */
++	x = at91_sys_read(AT91_MATRIX_USBPUCR);
++	at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
++
++	udc_data = *data;
++	platform_device_register(&at91sam9261_udc_device);
++}
++#else
++void __init at91_add_device_udc(struct at91_udc_data *data) {}
++#endif
++
++/* --------------------------------------------------------------------
++ *  MMC / SD
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
++static u64 mmc_dmamask = 0xffffffffUL;
++static struct at91_mmc_data mmc_data;
++
++static struct resource mmc_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_MCI,
++		.end	= AT91SAM9261_BASE_MCI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_MCI,
++		.end	= AT91SAM9261_ID_MCI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9261_mmc_device = {
++	.name		= "at91_mci",
++	.id		= -1,
++	.dev		= {
++				.dma_mask		= &mmc_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &mmc_data,
++	},
++	.resource	= mmc_resources,
++	.num_resources	= ARRAY_SIZE(mmc_resources),
++};
++
++void __init at91_add_device_mmc(struct at91_mmc_data *data)
++{
++	if (!data)
++		return;
++
++	/* input/irq */
++	if (data->det_pin) {
++		at91_set_gpio_input(data->det_pin, 1);
++		at91_set_deglitch(data->det_pin, 1);
++	}
++	if (data->wp_pin)
++		at91_set_gpio_input(data->wp_pin, 1);
++	if (data->vcc_pin)
++		at91_set_gpio_output(data->vcc_pin, 0);
++
++	/* CLK */
++	at91_set_B_periph(AT91_PIN_PA2, 0);
++
++	/* CMD */
++	at91_set_B_periph(AT91_PIN_PA1, 1);
++
++	/* DAT0, maybe DAT1..DAT3 */
++	at91_set_B_periph(AT91_PIN_PA0, 1);
++	if (data->wire4) {
++		at91_set_B_periph(AT91_PIN_PA4, 1);
++		at91_set_B_periph(AT91_PIN_PA5, 1);
++		at91_set_B_periph(AT91_PIN_PA6, 1);
++	}
++
++	mmc_data = *data;
++	platform_device_register(&at91sam9261_mmc_device);
++}
++#else
++void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  NAND / SmartMedia
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
++static struct at91_nand_data nand_data;
++
++#define NAND_BASE	AT91_CHIPSELECT_3
++
++static struct resource nand_resources[] = {
++	{
++		.start	= NAND_BASE,
++		.end	= NAND_BASE + SZ_256M - 1,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct platform_device at91_nand_device = {
++	.name		= "at91_nand",
++	.id		= -1,
++	.dev		= {
++				.platform_data	= &nand_data,
++	},
++	.resource	= nand_resources,
++	.num_resources	= ARRAY_SIZE(nand_resources),
++};
++
++void __init at91_add_device_nand(struct at91_nand_data *data)
++{
++	unsigned long csa, mode;
++
++	if (!data)
++		return;
++
++	csa = at91_sys_read(AT91_MATRIX_EBICSA);
++	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
++
++	/* set the bus interface characteristics */
++	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
++			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
++
++	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
++			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
++
++	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
++
++	if (data->bus_width_16)
++		mode = AT91_SMC_DBW_16;
++	else
++		mode = AT91_SMC_DBW_8;
++	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
++
++	/* enable pin */
++	if (data->enable_pin)
++		at91_set_gpio_output(data->enable_pin, 1);
++
++	/* ready/busy pin */
++	if (data->rdy_pin)
++		at91_set_gpio_input(data->rdy_pin, 1);
++
++	/* card detect pin */
++	if (data->det_pin)
++		at91_set_gpio_input(data->det_pin, 1);
++
++	at91_set_A_periph(AT91_PIN_PC0, 0);		/* NANDOE */
++	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
++
++	nand_data = *data;
++	platform_device_register(&at91_nand_device);
++}
++
++#else
++void __init at91_add_device_nand(struct at91_nand_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  TWI (i2c)
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
++
++static struct resource twi_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_TWI,
++		.end	= AT91SAM9261_BASE_TWI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_TWI,
++		.end	= AT91SAM9261_ID_TWI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9261_twi_device = {
++	.name		= "at91_i2c",
++	.id		= -1,
++	.resource	= twi_resources,
++	.num_resources	= ARRAY_SIZE(twi_resources),
++};
++
++void __init at91_add_device_i2c(void)
++{
++	/* pins used for TWI interface */
++	at91_set_A_periph(AT91_PIN_PA7, 0);		/* TWD */
++	at91_set_multi_drive(AT91_PIN_PA7, 1);
++
++	at91_set_A_periph(AT91_PIN_PA8, 0);		/* TWCK */
++	at91_set_multi_drive(AT91_PIN_PA8, 1);
++
++	platform_device_register(&at91sam9261_twi_device);
++}
++#else
++void __init at91_add_device_i2c(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  SPI
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
++static u64 spi_dmamask = 0xffffffffUL;
++
++static struct resource spi0_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_SPI0,
++		.end	= AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_SPI0,
++		.end	= AT91SAM9261_ID_SPI0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9261_spi0_device = {
++	.name		= "atmel_spi",
++	.id		= 0,
++	.dev		= {
++				.dma_mask		= &spi_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++	},
++	.resource	= spi0_resources,
++	.num_resources	= ARRAY_SIZE(spi0_resources),
++};
++
++static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
++
++static struct resource spi1_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_SPI1,
++		.end	= AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_SPI1,
++		.end	= AT91SAM9261_ID_SPI1,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9261_spi1_device = {
++	.name		= "atmel_spi",
++	.id		= 1,
++	.dev		= {
++				.dma_mask		= &spi_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++	},
++	.resource	= spi1_resources,
++	.num_resources	= ARRAY_SIZE(spi1_resources),
++};
++
++static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
++
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
++{
++	int i;
++	unsigned long cs_pin;
++	short enable_spi0 = 0;
++	short enable_spi1 = 0;
++
++	/* Choose SPI chip-selects */
++	for (i = 0; i < nr_devices; i++) {
++		if (devices[i].controller_data)
++			cs_pin = (unsigned long) devices[i].controller_data;
++		else if (devices[i].bus_num == 0)
++			cs_pin = spi0_standard_cs[devices[i].chip_select];
++		else
++			cs_pin = spi1_standard_cs[devices[i].chip_select];
++
++		if (devices[i].bus_num == 0)
++			enable_spi0 = 1;
++		else
++			enable_spi1 = 1;
++
++		/* enable chip-select pin */
++		at91_set_gpio_output(cs_pin, 1);
++
++		/* pass chip-select pin to driver */
++		devices[i].controller_data = (void *) cs_pin;
++	}
++
++	spi_register_board_info(devices, nr_devices);
++
++	/* Configure SPI bus(es) */
++	if (enable_spi0) {
++		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
++		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
++		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
++
++		at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
++		platform_device_register(&at91sam9261_spi0_device);
++	}
++	if (enable_spi1) {
++		at91_set_A_periph(AT91_PIN_PB30, 0);	/* SPI1_MISO */
++		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
++		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
++
++		at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
++		platform_device_register(&at91sam9261_spi1_device);
++	}
++}
++#else
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  LCD Controller
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
++static u64 lcdc_dmamask = 0xffffffffUL;
++static struct at91fb_info lcdc_data;
++
++static struct resource lcdc_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_LCDC_BASE,
++		.end	= AT91SAM9261_LCDC_BASE + SZ_4K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_LCDC,
++		.end	= AT91SAM9261_ID_LCDC,
++		.flags	= IORESOURCE_IRQ,
++	},
++#if defined(CONFIG_FB_INTSRAM)
++	[2] = {
++		.start	= AT91SAM9261_SRAM_BASE,
++		.end	= AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++#endif
++};
++
++static struct platform_device at91_lcdc_device = {
++	.name		= "at91-fb",
++	.id		= 0,
++	.dev		= {
++				.dma_mask		= &lcdc_dmamask,
++				.coherent_dma_mask	= 0xffffffff,
++				.platform_data		= &lcdc_data,
++	},
++	.resource	= lcdc_resources,
++	.num_resources	= ARRAY_SIZE(lcdc_resources),
++};
++
++void __init at91_add_device_lcdc(struct at91fb_info *data)
++{
++	if (!data) {
++		return;
++	}
++
++	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
++	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
++	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
++	at91_set_A_periph(AT91_PIN_PB4, 0);	/* LCDCC */
++	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD2 */
++	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD3 */
++	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD4 */
++	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD5 */
++	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD6 */
++	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD7 */
++	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD10 */
++	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD11 */
++	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD12 */
++	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD13 */
++	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD14 */
++	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD15 */
++	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD18 */
++	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD19 */
++	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD20 */
++	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD21 */
++	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
++	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
++
++	lcdc_data = *data;
++	platform_device_register(&at91_lcdc_device);
++}
++#else
++void __init at91_add_device_lcdc(struct at91fb_info *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  LEDs
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_LEDS)
++u8 at91_leds_cpu;
++u8 at91_leds_timer;
++
++void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++{
++	at91_leds_cpu	= cpu_led;
++	at91_leds_timer	= timer_led;
++}
++#else
++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++#endif
++
++
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ *  UART
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SERIAL_ATMEL)
++static struct resource dbgu_resources[] = {
++	[0] = {
++		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
++		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91_ID_SYS,
++		.end	= AT91_ID_SYS,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data dbgu_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
++	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
++};
++
++static struct platform_device at91sam9261_dbgu_device = {
++	.name		= "atmel_usart",
++	.id		= 0,
++	.dev		= {
++				.platform_data	= &dbgu_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= dbgu_resources,
++	.num_resources	= ARRAY_SIZE(dbgu_resources),
++};
++
++static inline void configure_dbgu_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
++	at91_set_A_periph(AT91_PIN_PA10, 1);		/* DTXD */
++}
++
++static struct resource uart0_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_US0,
++		.end	= AT91SAM9261_BASE_US0 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_US0,
++		.end	= AT91SAM9261_ID_US0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart0_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9261_uart0_device = {
++	.name		= "atmel_usart",
++	.id		= 1,
++	.dev		= {
++				.platform_data	= &uart0_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart0_resources,
++	.num_resources	= ARRAY_SIZE(uart0_resources),
++};
++
++static inline void configure_usart0_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
++	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
++	at91_set_A_periph(AT91_PIN_PC10, 0);		/* RTS0 */
++	at91_set_A_periph(AT91_PIN_PC11, 0);		/* CTS0 */
++}
++
++static struct resource uart1_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_US1,
++		.end	= AT91SAM9261_BASE_US1 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_US1,
++		.end	= AT91SAM9261_ID_US1,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart1_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9261_uart1_device = {
++	.name		= "atmel_usart",
++	.id		= 2,
++	.dev		= {
++				.platform_data	= &uart1_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart1_resources,
++	.num_resources	= ARRAY_SIZE(uart1_resources),
++};
++
++static inline void configure_usart1_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
++	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
++}
++
++static struct resource uart2_resources[] = {
++	[0] = {
++		.start	= AT91SAM9261_BASE_US2,
++		.end	= AT91SAM9261_BASE_US2 + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9261_ID_US2,
++		.end	= AT91SAM9261_ID_US2,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct atmel_uart_data uart2_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++
++static struct platform_device at91sam9261_uart2_device = {
++	.name		= "atmel_usart",
++	.id		= 3,
++	.dev		= {
++				.platform_data	= &uart2_data,
++				.coherent_dma_mask = 0xffffffff,
++	},
++	.resource	= uart2_resources,
++	.num_resources	= ARRAY_SIZE(uart2_resources),
++};
++
++static inline void configure_usart2_pins(void)
++{
++	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
++	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
++}
++
++struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
++struct platform_device *atmel_default_console_device;	/* the serial console device */
++
++void __init at91_init_serial(struct at91_uart_config *config)
++{
++	int i;
++
++	/* Fill in list of supported UARTs */
++	for (i = 0; i < config->nr_tty; i++) {
++		switch (config->tty_map[i]) {
++			case 0:
++				configure_usart0_pins();
++				at91_uarts[i] = &at91sam9261_uart0_device;
++				at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
++				break;
++			case 1:
++				configure_usart1_pins();
++				at91_uarts[i] = &at91sam9261_uart1_device;
++				at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
++				break;
++			case 2:
++				configure_usart2_pins();
++				at91_uarts[i] = &at91sam9261_uart2_device;
++				at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
++				break;
++			case 3:
++				configure_dbgu_pins();
++				at91_uarts[i] = &at91sam9261_dbgu_device;
++				at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
++				break;
++			default:
++				continue;
++		}
++		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
++	}
++
++	/* Set serial console device */
++	if (config->console_tty < ATMEL_MAX_UART)
++		atmel_default_console_device = at91_uarts[config->console_tty];
++	if (!atmel_default_console_device)
++		printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
++void __init at91_add_device_serial(void)
++{
++	int i;
++
++	for (i = 0; i < ATMEL_MAX_UART; i++) {
++		if (at91_uarts[i])
++			platform_device_register(at91_uarts[i]);
++	}
++}
++#else
++void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_add_device_serial(void) {}
++#endif
++
++
++/* -------------------------------------------------------------------- */
++
++/*
++ * These devices are always present and don't need any board-specific
++ * setup.
++ */
++static int __init at91_add_standard_devices(void)
++{
++	return 0;
++}
++
++arch_initcall(at91_add_standard_devices);
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam926x_time.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam926x_time.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam926x_time.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam926x_time.c	Mon Nov 20 10:52:16 2006
+@@ -0,0 +1,114 @@
++/*
++ * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
++ *
++ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
++ * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/time.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/mach/time.h>
++
++#include <asm/arch/at91_pit.h>
++
++
++#define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
++#define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
++
++/*
++ * Returns number of microseconds since last timer interrupt.  Note that interrupts
++ * will have been disabled by do_gettimeofday()
++ *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
++ *  'tick' is usecs per jiffy (linux/timex.h).
++ */
++static unsigned long at91sam926x_gettimeoffset(void)
++{
++	unsigned long elapsed;
++	unsigned long t = at91_sys_read(AT91_PIT_PIIR);
++
++	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
++
++	return (unsigned long)(elapsed * 1000000) / LATCH;
++}
++
++/*
++ * IRQ handler for the timer.
++ */
++static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
++{
++	volatile long nr_ticks;
++
++	if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {	/* This is a shared interrupt */
++		write_seqlock(&xtime_lock);
++
++		/* Get number to ticks performed before interrupt and clear PIT interrupt */
++		nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
++		do {
++			timer_tick();
++			nr_ticks--;
++		} while (nr_ticks);
++
++		write_sequnlock(&xtime_lock);
++		return IRQ_HANDLED;
++	} else
++		return IRQ_NONE;		/* not handled */
++}
++
++static struct irqaction at91sam926x_timer_irq = {
++	.name		= "at91_tick",
++	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
++	.handler	= at91sam926x_timer_interrupt
++};
++
++void at91sam926x_timer_reset(void)
++{
++	/* Disable timer */
++	at91_sys_write(AT91_PIT_MR, 0);
++
++	/* Clear any pending interrupts */
++	(void) at91_sys_read(AT91_PIT_PIVR);
++
++	/* Set Period Interval timer and enable its interrupt */
++	at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
++}
++
++/*
++ * Set up timer interrupt.
++ */
++void __init at91sam926x_timer_init(void)
++{
++	/* Initialize and enable the timer */
++	at91sam926x_timer_reset();
++
++	/* Make IRQs happen for the system timer. */
++	setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
++}
++
++#ifdef CONFIG_PM
++static void at91sam926x_timer_suspend(void)
++{
++	/* Disable timer */
++	at91_sys_write(AT91_PIT_MR, 0);
++}
++#else
++#define at91sam926x_timer_suspend	NULL
++#endif
++
++struct sys_timer at91sam926x_timer = {
++	.init		= at91sam926x_timer_init,
++	.offset		= at91sam926x_gettimeoffset,
++	.suspend	= at91sam926x_timer_suspend,
++	.resume		= at91sam926x_timer_reset,
++};
++
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-1arm.c linux-2.6.19/arch/arm/mach-at91rm9200/board-1arm.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-1arm.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-1arm.c	Thu Nov 23 15:50:12 2006
+@@ -64,7 +64,7 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata onearm_eth_data = {
++static struct eth_platform_data __initdata onearm_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 1,
+ };
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-carmeva.c linux-2.6.19/arch/arm/mach-at91rm9200/board-carmeva.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-carmeva.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-carmeva.c	Thu Nov 23 15:50:12 2006
+@@ -65,8 +65,7 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-
+-static struct at91_eth_data __initdata carmeva_eth_data = {
++static struct eth_platform_data __initdata carmeva_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 1,
+ };
+@@ -89,8 +88,33 @@
+ // };
+ 
+ static struct at91_mmc_data __initdata carmeva_mmc_data = {
+-	.is_b		= 0,
++	.slot_b		= 0,
+ 	.wire4		= 1,
++	.det_pin	= AT91_PIN_PB10,
++	.wp_pin		= AT91_PIN_PC14,
++};
++
++static struct spi_board_info carmeva_spi_devices[] = {
++	{ /* DataFlash chip */
++		.modalias = "mtd_dataflash",
++		.chip_select  = 0,
++		.max_speed_hz = 10 * 1000 * 1000,
++	},
++	{ /* User accessable spi - cs1 (250KHz) */
++		.modalias = "spi-cs1",
++		.chip_select  = 1,
++		.max_speed_hz = 250 *  1000,
++	},
++	{ /* User accessable spi - cs2 (1MHz) */
++		.modalias = "spi-cs2",
++		.chip_select  = 2,
++		.max_speed_hz = 1 * 1000 *  1000,
++	},
++	{ /* User accessable spi - cs3 (10MHz) */
++		.modalias = "spi-cs3",
++		.chip_select  = 3,
++		.max_speed_hz = 10 * 1000 *  1000,
++	},
+ };
+ 
+ static void __init carmeva_board_init(void)
+@@ -105,10 +129,10 @@
+ 	at91_add_device_udc(&carmeva_udc_data);
+ 	/* I2C */
+ 	at91_add_device_i2c();
++	/* SPI */
++	at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
+ 	/* Compact Flash */
+ //	at91_add_device_cf(&carmeva_cf_data);
+-	/* SPI */
+-//	at91_add_device_spi(NULL, 0);
+ 	/* MMC */
+ 	at91_add_device_mmc(&carmeva_mmc_data);
+ }
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb337.c linux-2.6.19/arch/arm/mach-at91rm9200/board-csb337.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb337.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-csb337.c	Thu Nov 23 15:50:12 2006
+@@ -68,7 +68,7 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata csb337_eth_data = {
++static struct eth_platform_data __initdata csb337_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC2,
+ 	.is_rmii	= 0,
+ };
+@@ -99,7 +99,7 @@
+ 
+ static struct at91_mmc_data __initdata csb337_mmc_data = {
+ 	.det_pin	= AT91_PIN_PD5,
+-	.is_b		= 0,
++	.slot_b		= 0,
+ 	.wire4		= 1,
+ 	.wp_pin		= AT91_PIN_PD6,
+ };
+@@ -112,6 +112,23 @@
+ 	},
+ };
+ 
++static struct at91_gpio_led csb337_leds[] = {
++	{
++		.name		= "led0",
++		.gpio		= AT91_PIN_PB0,
++		.trigger	= "heartbeat",
++	},
++	{
++		.name		= "led1",
++		.gpio		= AT91_PIN_PB1,
++		.trigger	= "timer",
++	},
++	{
++		.name		= "led2",
++		.gpio		= AT91_PIN_PB2,
++	}
++};
++
+ static void __init csb337_board_init(void)
+ {
+ 	/* Serial */
+@@ -131,6 +148,8 @@
+ 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
+ 	/* MMC */
+ 	at91_add_device_mmc(&csb337_mmc_data);
++	/* LEDS */
++	at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
+ }
+ 
+ MACHINE_START(CSB337, "Cogent CSB337")
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb637.c linux-2.6.19/arch/arm/mach-at91rm9200/board-csb637.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb637.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-csb637.c	Thu Nov 23 15:50:12 2006
+@@ -67,7 +67,7 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata csb637_eth_data = {
++static struct eth_platform_data __initdata csb637_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC0,
+ 	.is_rmii	= 0,
+ };
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-dk.c linux-2.6.19/arch/arm/mach-at91rm9200/board-dk.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-dk.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-dk.c	Thu Nov 23 15:50:12 2006
+@@ -27,6 +27,7 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
++#include <linux/mtd/physmap.h>
+ 
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+@@ -39,6 +40,7 @@
+ 
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
++#include <asm/arch/at91rm9200_mc.h>
+ 
+ #include "generic.h"
+ 
+@@ -71,7 +73,186 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata dk_eth_data = {
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE	0x30000000L
++#define AT91_FB_REG_SIZE	0x200
++#define AT91_FB_VMEM_BASE	0x30200000L
++#define AT91_FB_VMEM_SIZE	0x140000L
++
++static void __init dk_init_video(void)
++{
++	/* NWAIT Signal */
++	at91_set_A_periph(AT91_PIN_PC6, 0);
++
++	/* Initialization of the Static Memory Controller for Chip Select 2 */
++	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16			/* 16 bit */
++				| AT91_SMC_WSEN | AT91_SMC_NWS_(4)	/* wait states */
++				| AT91_SMC_TDF_(1)			/* float time */
++	);
++
++	AT91F_ICS1523_clockinit();
++}
++
++/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
++   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
++	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
++	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
++	{S1DREG_GPIO_CNF0,		0x00},
++	{S1DREG_GPIO_CNF1,		0x00},
++	{S1DREG_GPIO_CTL0,		0x08},
++	{S1DREG_GPIO_CTL1,		0x00},
++	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
++	{S1DREG_LCD_CLK_CNF,		0x00},
++	{S1DREG_CRT_CLK_CNF,		0x00},
++	{S1DREG_MPLUG_CLK_CNF,		0x00},
++	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
++	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
++	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
++	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
++	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
++	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
++	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
++	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
++	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
++	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
++	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
++	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
++	{S1DREG_LCD_DISP_START0,	0x00},
++	{S1DREG_LCD_DISP_START1,	0xC8},
++	{S1DREG_LCD_DISP_START2,	0x00},
++	{S1DREG_LCD_MEM_OFF0,		0x80},
++	{S1DREG_LCD_MEM_OFF1,		0x02},
++	{S1DREG_LCD_PIX_PAN,		0x00},
++	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
++	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
++	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
++	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
++	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_TV_OUT_CTL,		0x10},
++	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
++	{S1DREG_CRT_DISP_START0,	0x00},
++	{S1DREG_CRT_DISP_START1,	0x00},
++	{S1DREG_CRT_DISP_START2,	0x00},
++	{S1DREG_CRT_MEM_OFF0,		0x80},
++	{S1DREG_CRT_MEM_OFF1,		0x02},
++	{S1DREG_CRT_PIX_PAN,		0x00},
++	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_LCD_CUR_START,		0x01},
++	{S1DREG_LCD_CUR_XPOS0,		0x00},
++	{S1DREG_LCD_CUR_XPOS1,		0x00},
++	{S1DREG_LCD_CUR_YPOS0,		0x00},
++	{S1DREG_LCD_CUR_YPOS1,		0x00},
++	{S1DREG_LCD_CUR_BCTL0,		0x00},
++	{S1DREG_LCD_CUR_GCTL0,		0x00},
++	{S1DREG_LCD_CUR_RCTL0,		0x00},
++	{S1DREG_LCD_CUR_BCTL1,		0x1F},
++	{S1DREG_LCD_CUR_GCTL1,		0x3F},
++	{S1DREG_LCD_CUR_RCTL1,		0x1F},
++	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
++	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_CRT_CUR_START,		0x01},
++	{S1DREG_CRT_CUR_XPOS0,		0x00},
++	{S1DREG_CRT_CUR_XPOS1,		0x00},
++	{S1DREG_CRT_CUR_YPOS0,		0x00},
++	{S1DREG_CRT_CUR_YPOS1,		0x00},
++	{S1DREG_CRT_CUR_BCTL0,		0x00},
++	{S1DREG_CRT_CUR_GCTL0,		0x00},
++	{S1DREG_CRT_CUR_RCTL0,		0x00},
++	{S1DREG_CRT_CUR_BCTL1,		0x1F},
++	{S1DREG_CRT_CUR_GCTL1,		0x3F},
++	{S1DREG_CRT_CUR_RCTL1,		0x1F},
++	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CC_EXP,		0x00},
++	{S1DREG_BBLT_OP,		0x00},
++	{S1DREG_BBLT_SRC_START0,	0x00},
++	{S1DREG_BBLT_SRC_START1,	0x00},
++	{S1DREG_BBLT_SRC_START2,	0x00},
++	{S1DREG_BBLT_DST_START0,	0x00},
++	{S1DREG_BBLT_DST_START1,	0x00},
++	{S1DREG_BBLT_DST_START2,	0x00},
++	{S1DREG_BBLT_MEM_OFF0,		0x00},
++	{S1DREG_BBLT_MEM_OFF1,		0x00},
++	{S1DREG_BBLT_WIDTH0,		0x00},
++	{S1DREG_BBLT_WIDTH1,		0x00},
++	{S1DREG_BBLT_HEIGHT0,		0x00},
++	{S1DREG_BBLT_HEIGHT1,		0x00},
++	{S1DREG_BBLT_BGC0,		0x00},
++	{S1DREG_BBLT_BGC1,		0x00},
++	{S1DREG_BBLT_FGC0,		0x00},
++	{S1DREG_BBLT_FGC1,		0x00},
++	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
++	{S1DREG_LKUP_ADDR,		0x00},
++	{S1DREG_PS_CNF,			0x00},	/* Power Save disable */
++	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
++	{S1DREG_CPU2MEM_WDOGT,		0x00},
++	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
++	.initregs		= dk_s1dfb_initregs,
++	.initregssize		= ARRAY_SIZE(dk_s1dfb_initregs),
++	.platform_init_video	= dk_init_video,
++};
++
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource dk_s1dfb_resource[] = {
++	[0] = {	/* video mem */
++		.name   = "s1d13806 memory",
++		.start  = AT91_FB_VMEM_BASE,
++		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {	/* video registers */
++		.name   = "s1d13806 registers",
++		.start  = AT91_FB_REG_BASE,
++		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device dk_s1dfb_device = {
++	.name		= "s1d13806fb",
++	.id		= -1,
++	.dev		= {
++			.dma_mask		= &s1dfb_dmamask,
++			.coherent_dma_mask	= 0xffffffff,
++			.platform_data		= &dk_s1dfb_pdata,
++	},
++	.resource	= dk_s1dfb_resource,
++	.num_resources	= ARRAY_SIZE(dk_s1dfb_resource),
++};
++
++static void __init dk_add_device_video(void)
++{
++	platform_device_register(&dk_s1dfb_device);
++}
++#else
++static void __init dk_add_device_video(void) {}
++#endif
++
++static struct eth_platform_data __initdata dk_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 1,
+ };
+@@ -93,7 +274,7 @@
+ };
+ 
+ static struct at91_mmc_data __initdata dk_mmc_data = {
+-	.is_b		= 0,
++	.slot_b		= 0,
+ 	.wire4		= 1,
+ };
+ 
+@@ -145,6 +326,37 @@
+ 	.partition_info	= nand_partitions,
+ };
+ 
++#define DK_FLASH_BASE	AT91_CHIPSELECT_0
++#define DK_FLASH_SIZE	0x200000
++
++static struct physmap_flash_data dk_flash_data = {
++	.width	= 2,
++};
++
++static struct resource dk_flash_resource = {
++	.start		= DK_FLASH_BASE,
++	.end		= DK_FLASH_BASE + DK_FLASH_SIZE - 1,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device dk_flash = {
++	.name		= "physmap-flash",
++	.id		= 0,
++	.dev		= {
++				.platform_data	= &dk_flash_data,
++			},
++	.resource	= &dk_flash_resource,
++	.num_resources	= 1,
++};
++
++static struct at91_gpio_led dk_leds[] = {
++	{
++		.name		= "led0",
++		.gpio		= AT91_PIN_PB2,
++		.trigger	= "timer",
++	}
++};
++
+ static void __init dk_board_init(void)
+ {
+ 	/* Serial */
+@@ -172,8 +384,12 @@
+ #endif
+ 	/* NAND */
+ 	at91_add_device_nand(&dk_nand_data);
++	/* NOR Flash */
++	platform_device_register(&dk_flash);
++	/* LEDs */
++	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); 
+ 	/* VGA */
+-//	dk_add_device_video();
++	dk_add_device_video();
+ }
+ 
+ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-eb9200.c linux-2.6.19/arch/arm/mach-at91rm9200/board-eb9200.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-eb9200.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-eb9200.c	Thu Nov 23 15:50:12 2006
+@@ -65,7 +65,7 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata eb9200_eth_data = {
++static struct eth_platform_data __initdata eb9200_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 1,
+ };
+@@ -87,7 +87,7 @@
+ };
+ 
+ static struct at91_mmc_data __initdata eb9200_mmc_data = {
+-	.is_b		= 0,
++	.slot_b		= 0,
+ 	.wire4		= 1,
+ };
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-ek.c linux-2.6.19/arch/arm/mach-at91rm9200/board-ek.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-ek.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-ek.c	Thu Nov 23 15:50:12 2006
+@@ -27,6 +27,7 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
++#include <linux/mtd/physmap.h> 
+ 
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+@@ -39,6 +40,7 @@
+ 
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
++#include <asm/arch/at91rm9200_mc.h>
+ 
+ #include "generic.h"
+ 
+@@ -71,7 +73,188 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata ek_eth_data = {
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE	0x40000000L
++#define	AT91_FB_REG_SIZE	0x200
++#define AT91_FB_VMEM_BASE	0x40200000L
++#define AT91_FB_VMEM_SIZE	0x140000L
++
++static void __init ek_init_video(void)
++{
++	/* NWAIT Signal */
++	at91_set_A_periph(AT91_PIN_PC6, 0);
++
++	/* Initialization of the Static Memory Controller for Chip Select 3 */
++	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16			/* 16 bit */
++				| AT91_SMC_WSEN | AT91_SMC_NWS_(5)	/* wait states */
++				| AT91_SMC_TDF_(1)			/* float time */
++	);
++
++	AT91F_ICS1523_clockinit();
++}
++
++/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
++   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
++	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
++	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
++	{S1DREG_GPIO_CNF0,		0xFF},	// 0x00
++	{S1DREG_GPIO_CNF1,		0x1F},	// 0x08
++	{S1DREG_GPIO_CTL0,		0x00},
++	{S1DREG_GPIO_CTL1,		0x00},
++	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
++	{S1DREG_LCD_CLK_CNF,		0x00},
++	{S1DREG_CRT_CLK_CNF,		0x00},
++	{S1DREG_MPLUG_CLK_CNF,		0x00},
++	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
++	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
++	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
++	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
++	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
++	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
++	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
++	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
++	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
++	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
++	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
++	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
++	{S1DREG_LCD_DISP_START0,	0x00},
++	{S1DREG_LCD_DISP_START1,	0xC8},
++	{S1DREG_LCD_DISP_START2,	0x00},
++	{S1DREG_LCD_MEM_OFF0,		0x80},
++	{S1DREG_LCD_MEM_OFF1,		0x02},
++	{S1DREG_LCD_PIX_PAN,		0x00},
++	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
++	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
++	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
++	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
++	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_TV_OUT_CTL,		0x10},
++	{0x005E,			0x9F},
++	{0x005F,			0x00},
++	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
++	{S1DREG_CRT_DISP_START0,	0x00},
++	{S1DREG_CRT_DISP_START1,	0x00},
++	{S1DREG_CRT_DISP_START2,	0x00},
++	{S1DREG_CRT_MEM_OFF0,		0x80},
++	{S1DREG_CRT_MEM_OFF1,		0x02},
++	{S1DREG_CRT_PIX_PAN,		0x00},
++	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_LCD_CUR_START,		0x01},
++	{S1DREG_LCD_CUR_XPOS0,		0x00},
++	{S1DREG_LCD_CUR_XPOS1,		0x00},
++	{S1DREG_LCD_CUR_YPOS0,		0x00},
++	{S1DREG_LCD_CUR_YPOS1,		0x00},
++	{S1DREG_LCD_CUR_BCTL0,		0x00},
++	{S1DREG_LCD_CUR_GCTL0,		0x00},
++	{S1DREG_LCD_CUR_RCTL0,		0x00},
++	{S1DREG_LCD_CUR_BCTL1,		0x1F},
++	{S1DREG_LCD_CUR_GCTL1,		0x3F},
++	{S1DREG_LCD_CUR_RCTL1,		0x1F},
++	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
++	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_CRT_CUR_START,		0x01},
++	{S1DREG_CRT_CUR_XPOS0,		0x00},
++	{S1DREG_CRT_CUR_XPOS1,		0x00},
++	{S1DREG_CRT_CUR_YPOS0,		0x00},
++	{S1DREG_CRT_CUR_YPOS1,		0x00},
++	{S1DREG_CRT_CUR_BCTL0,		0x00},
++	{S1DREG_CRT_CUR_GCTL0,		0x00},
++	{S1DREG_CRT_CUR_RCTL0,		0x00},
++	{S1DREG_CRT_CUR_BCTL1,		0x1F},
++	{S1DREG_CRT_CUR_GCTL1,		0x3F},
++	{S1DREG_CRT_CUR_RCTL1,		0x1F},
++	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CC_EXP,		0x00},
++	{S1DREG_BBLT_OP,		0x00},
++	{S1DREG_BBLT_SRC_START0,	0x00},
++	{S1DREG_BBLT_SRC_START1,	0x00},
++	{S1DREG_BBLT_SRC_START2,	0x00},
++	{S1DREG_BBLT_DST_START0,	0x00},
++	{S1DREG_BBLT_DST_START1,	0x00},
++	{S1DREG_BBLT_DST_START2,	0x00},
++	{S1DREG_BBLT_MEM_OFF0,		0x00},
++	{S1DREG_BBLT_MEM_OFF1,		0x00},
++	{S1DREG_BBLT_WIDTH0,		0x00},
++	{S1DREG_BBLT_WIDTH1,		0x00},
++	{S1DREG_BBLT_HEIGHT0,		0x00},
++	{S1DREG_BBLT_HEIGHT1,		0x00},
++	{S1DREG_BBLT_BGC0,		0x00},
++	{S1DREG_BBLT_BGC1,		0x00},
++	{S1DREG_BBLT_FGC0,		0x00},
++	{S1DREG_BBLT_FGC1,		0x00},
++	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
++	{S1DREG_LKUP_ADDR,		0x00},
++	{S1DREG_PS_CNF,			0x10},	/* Power Save disable */
++	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
++	{S1DREG_CPU2MEM_WDOGT,		0x00},
++	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
++	.initregs		= ek_s1dfb_initregs,
++	.initregssize		= ARRAY_SIZE(ek_s1dfb_initregs),
++	.platform_init_video	= ek_init_video,
++};
++
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource ek_s1dfb_resource[] = {
++	[0] = {	/* video mem */
++		.name   = "s1d13806 memory",
++		.start  = AT91_FB_VMEM_BASE,
++		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {	/* video registers */
++		.name   = "s1d13806 registers",
++		.start  = AT91_FB_REG_BASE,
++		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device ek_s1dfb_device = {
++	.name		= "s1d13806fb",
++	.id		= -1,
++	.dev		= {
++			.dma_mask		= &s1dfb_dmamask,
++			.coherent_dma_mask	= 0xffffffff,
++			.platform_data		= &ek_s1dfb_pdata,
++	},
++	.resource	= ek_s1dfb_resource,
++	.num_resources	= ARRAY_SIZE(ek_s1dfb_resource),
++};
++
++static void __init ek_add_device_video(void)
++{
++	platform_device_register(&ek_s1dfb_device);
++}
++#else
++static void __init ek_add_device_video(void) {}
++#endif
++
++static struct eth_platform_data __initdata ek_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 1,
+ };
+@@ -87,7 +270,7 @@
+ 
+ static struct at91_mmc_data __initdata ek_mmc_data = {
+ 	.det_pin	= AT91_PIN_PB27,
+-	.is_b		= 0,
++	.slot_b		= 0,
+ 	.wire4		= 1,
+ 	.wp_pin		= AT91_PIN_PA17,
+ };
+@@ -107,6 +290,42 @@
+ #endif
+ };
+ 
++#define EK_FLASH_BASE	AT91_CHIPSELECT_0
++#define EK_FLASH_SIZE	0x200000
++
++static struct physmap_flash_data ek_flash_data = {
++	.width	= 2,
++};
++
++static struct resource ek_flash_resource = {
++	.start		= EK_FLASH_BASE,
++	.end		= EK_FLASH_BASE + EK_FLASH_SIZE - 1,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device ek_flash = {
++	.name		= "physmap-flash",
++	.id		= 0,
++	.dev		= {
++				.platform_data	= &ek_flash_data,
++			},
++	.resource	= &ek_flash_resource,
++	.num_resources	= 1,
++};
++
++static struct at91_gpio_led ek_leds[] = {
++	{
++		.name		= "led0",
++		.gpio		= AT91_PIN_PB1,
++		.trigger	= "heartbeat",
++	},
++	{
++		.name		= "led1",
++		.gpio		= AT91_PIN_PB2,
++		.trigger	= "timer",
++	}
++};
++
+ static void __init ek_board_init(void)
+ {
+ 	/* Serial */
+@@ -130,8 +349,12 @@
+ 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
+ 	at91_add_device_mmc(&ek_mmc_data);
+ #endif
++	/* NOR Flash */
++	platform_device_register(&ek_flash);
++	/* LEDs */
++	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ 	/* VGA */
+-//	ek_add_device_video();
++	ek_add_device_video();
+ }
+ 
+ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-kafa.c linux-2.6.19/arch/arm/mach-at91rm9200/board-kafa.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-kafa.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-kafa.c	Thu Nov 23 15:50:12 2006
+@@ -67,7 +67,7 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata kafa_eth_data = {
++static struct eth_platform_data __initdata kafa_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 0,
+ };
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-kb9202.c linux-2.6.19/arch/arm/mach-at91rm9200/board-kb9202.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-kb9202.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-kb9202.c	Thu Nov 23 15:50:12 2006
+@@ -68,7 +68,7 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
+-static struct at91_eth_data __initdata kb9202_eth_data = {
++static struct eth_platform_data __initdata kb9202_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PB29,
+ 	.is_rmii	= 0,
+ };
+@@ -84,7 +84,7 @@
+ 
+ static struct at91_mmc_data __initdata kb9202_mmc_data = {
+ 	.det_pin	= AT91_PIN_PB2,
+-	.is_b		= 0,
++	.slot_b		= 0,
+ 	.wire4		= 1,
+ };
+ 
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-sam9260ek.c linux-2.6.19/arch/arm/mach-at91rm9200/board-sam9260ek.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-sam9260ek.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-sam9260ek.c	Sat Nov 25 10:47:45 2006
+@@ -0,0 +1,201 @@
++/*
++ * linux/arch/arm/mach-at91rm9200/board-ek.c
++ *
++ *  Copyright (C) 2005 SAN People
++ *  Copyright (C) 2006 Atmel
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam926x_mc.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ *    0 .. 5 = USART0 .. USART5
++ *    6      = DBGU
++ */
++static struct at91_uart_config __initdata ek_uart_config = {
++	.console_tty	= 0,				/* ttyS0 */
++	.nr_tty		= 3,
++	.tty_map	= { 6, 0, 1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
++};
++
++static void __init ek_map_io(void)
++{
++	/* Initialize processor: 18.432 MHz crystal */
++	at91sam9260_initialize(18432000);
++
++	/* Setup the serial ports and console */
++	at91_init_serial(&ek_uart_config);
++}
++
++static void __init ek_init_irq(void)
++{
++	at91sam9260_init_interrupts(NULL);
++}
++
++
++/*
++ * USB Host port
++ */
++static struct at91_usbh_data __initdata ek_usbh_data = {
++	.ports		= 2,
++};
++
++/*
++ * USB Device port
++ */
++static struct at91_udc_data __initdata ek_udc_data = {
++	.vbus_pin	= AT91_PIN_PC5,
++	.pullup_pin	= 0,		/* pull-up driven by UDC */
++};
++
++
++/*
++ * SPI devices.
++ */
++static struct spi_board_info ek_spi_devices[] = {
++#if !defined(CONFIG_MMC_AT91)
++	{	/* DataFlash chip */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 1,
++		.max_speed_hz	= 15 * 1000 * 1000,
++		.bus_num	= 0,
++	},
++#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
++	{	/* DataFlash card */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 0,
++		.max_speed_hz	= 15 * 1000 * 1000,
++		.bus_num	= 0,
++	},
++#endif
++#endif
++#if defined(CONFIG_SND_AT73C213)
++	{	/* AT73C213 DAC */
++		.modalias	= "snd_at73c213",
++		.chip_select	= 0,
++		.max_speed_hz	= 10 * 1000 * 1000,
++		.bus_num	= 1,
++	},
++#endif
++};
++
++
++/*
++ * MACB Ethernet device
++ */
++static struct __initdata eth_platform_data ek_macb_data = {
++	.is_rmii	= 1,
++};
++
++
++/*
++ * NAND flash
++ */
++static struct mtd_partition __initdata ek_nand_partition[] = {
++	{
++		.name	= "Partition 1",
++		.offset	= 0,
++		.size	= 256 * 1024,
++	},
++	{
++		.name	= "Partition 2",
++		.offset	= 256 * 1024,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct mtd_partition *nand_partitions(int size, int *num_partitions)
++{
++	*num_partitions = ARRAY_SIZE(ek_nand_partition);
++	return ek_nand_partition;
++}
++
++static struct at91_nand_data __initdata ek_nand_data = {
++	.ale		= 21,
++	.cle		= 22,
++//	.det_pin	= ... not connected
++	.rdy_pin	= AT91_PIN_PC13,
++	.enable_pin	= AT91_PIN_PC14,
++	.partition_info	= nand_partitions,
++#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
++	.bus_width_16	= 1,
++#else
++	.bus_width_16	= 0,
++#endif
++};
++
++
++/*
++ * MCI (SD/MMC)
++ */
++static struct at91_mmc_data __initdata ek_mmc_data = {
++	.slot_b		= 1,
++	.wire4		= 1,
++//	.det_pin	= ... not connected
++//	.wp_pin		= ... not connected
++//	.vcc_pin	= ... not connected
++};
++
++static void __init ek_board_init(void)
++{
++	/* Serial */
++	at91_add_device_serial();
++	/* USB Host */
++	at91_add_device_usbh(&ek_usbh_data);
++	/* USB Device */
++	at91_add_device_udc(&ek_udc_data);
++	/* SPI */
++	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
++	/* NAND */
++	at91_add_device_nand(&ek_nand_data);
++	/* Ethernet */
++	at91_add_device_eth(&ek_macb_data);
++	/* MMC */
++	at91_add_device_mmc(&ek_mmc_data);
++}
++
++MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
++	/* Maintainer: Atmel */
++	.phys_io	= AT91_BASE_SYS,
++	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++	.boot_params	= AT91_SDRAM_BASE + 0x100,
++	.timer		= &at91sam926x_timer,
++	.map_io		= ek_map_io,
++	.init_irq	= ek_init_irq,
++	.init_machine	= ek_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-sam9261ek.c linux-2.6.19/arch/arm/mach-at91rm9200/board-sam9261ek.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-sam9261ek.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-sam9261ek.c	Sat Nov 25 11:07:44 2006
+@@ -0,0 +1,259 @@
++/*
++ * linux/arch/arm/mach-at91rm9200/board-ek.c
++ *
++ *  Copyright (C) 2005 SAN People
++ *  Copyright (C) 2006 Atmel
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/dm9000.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam926x_mc.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ *    0 .. 2 = USART0 .. USART2
++ *    3      = DBGU
++ */
++static struct at91_uart_config __initdata ek_uart_config = {
++	.console_tty	= 0,				/* ttyS0 */
++	.nr_tty		= 1,
++	.tty_map	= { 3, -1, -1, -1 }		/* ttyS0, ..., ttyS3 */
++};
++
++static void __init ek_map_io(void)
++{
++	/* Initialize processor: 18.432 MHz crystal */
++	at91sam9261_initialize(18432000);
++
++	/* Setup the serial ports and console */
++	at91_init_serial(&ek_uart_config);
++}
++
++static void __init ek_init_irq(void)
++{
++	at91sam9261_init_interrupts(NULL);
++}
++
++
++/*
++ * DM9000 ethernet device
++ */
++#if defined(CONFIG_DM9000)
++static struct resource at91sam9261_dm9000_resource[] = {
++	[0] = {
++		.start	= AT91_CHIPSELECT_2,
++		.end	= AT91_CHIPSELECT_2 + 3,
++		.flags	= IORESOURCE_MEM
++	},
++	[1] = {
++		.start	= AT91_CHIPSELECT_2 + 0x44,
++		.end	= AT91_CHIPSELECT_2 + 0xFF,
++		.flags	= IORESOURCE_MEM
++	},
++	[2] = {
++		.start	= AT91_PIN_PC11,
++		.end	= AT91_PIN_PC11,
++		.flags	= IORESOURCE_IRQ
++	}
++};
++
++static struct dm9000_plat_data dm9000_platdata = {
++	.flags		= DM9000_PLATF_16BITONLY,
++};
++
++static struct platform_device at91sam9261_dm9000_device = {
++	.name		= "dm9000",
++	.id		= 0,
++	.num_resources	= ARRAY_SIZE(at91sam9261_dm9000_resource),
++	.resource	= at91sam9261_dm9000_resource,
++	.dev		= {
++		.platform_data	= &dm9000_platdata,
++	}
++};
++
++static void __init ek_add_device_dm9000(void)
++{
++	/*
++	 * Configure Chip-Select 2 on SMC for the DM9000.
++	 * Note: These timings were calculated for MASTER_CLOCK = 100000000
++	 *  according to the DM9000 timings.
++	 */
++	at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
++	at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
++	at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
++	at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
++
++	/* Configure Reset signal as output */
++	at91_set_gpio_output(AT91_PIN_PC10, 0);
++
++	/* Configure Interrupt pin as input, no pull-up */
++	at91_set_gpio_input(AT91_PIN_PC11, 0);
++
++	platform_device_register(&at91sam9261_dm9000_device);
++}
++#else
++static void __init ek_add_device_dm9000(void) {}
++#endif /* CONFIG_DM9000 */
++
++
++/*
++ * USB Host Port
++ */
++static struct at91_usbh_data __initdata ek_usbh_data = {
++	.ports		= 2,
++};
++
++
++/*
++ * USB Device Port
++ */
++static struct at91_udc_data __initdata ek_udc_data = {
++	.vbus_pin	= AT91_PIN_PB29,
++	.pullup_pin	= 0,		/* pull-up driven by UDC */
++};
++
++
++/*
++ * MCI (SD/MMC)
++ */
++static struct at91_mmc_data __initdata ek_mmc_data = {
++	.wire4		= 1,
++//	.det_pin	= ... not connected
++//	.wp_pin		= ... not connected
++//	.vcc_pin	= ... not connected
++};
++
++
++/*
++ * NAND flash
++ */
++static struct mtd_partition __initdata ek_nand_partition[] = {
++	{
++		.name	= "Partition 1",
++		.offset	= 0,
++		.size	= 256 * 1024,
++	},
++	{
++		.name	= "Partition 2",
++		.offset	= 256 * 1024 ,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct mtd_partition *nand_partitions(int size, int *num_partitions)
++{
++	*num_partitions = ARRAY_SIZE(ek_nand_partition);
++	return ek_nand_partition;
++}
++
++static struct at91_nand_data __initdata ek_nand_data = {
++	.ale		= 22,
++	.cle		= 21,
++//	.det_pin	= ... not connected
++	.rdy_pin	= AT91_PIN_PC15,
++	.enable_pin	= AT91_PIN_PC14,
++	.partition_info	= nand_partitions,
++#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
++	.bus_width_16	= 1,
++#else
++	.bus_width_16	= 0,
++#endif
++};
++
++/*
++ * SPI devices
++ */
++static struct spi_board_info ek_spi_devices[] = {
++	{	/* DataFlash chip */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 0,
++		.max_speed_hz	= 15 * 1000 * 1000,
++		.bus_num	= 0,
++	},
++#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
++	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 3,
++		.max_speed_hz	= 15 * 1000 * 1000,
++		.bus_num	= 0,
++	},
++#elif defined(CONFIG_SND_AT73C213)
++	{	/* AT73C213 DAC */
++		.modalias	= "snd_at73c213",
++		.chip_select	= 3,
++		.max_speed_hz	= 10 * 1000 * 1000,
++		.bus_num	= 0,
++	},
++#endif
++};
++
++
++static void __init ek_board_init(void)
++{
++	/* Serial */
++	at91_add_device_serial();
++	/* USB Host */
++	at91_add_device_usbh(&ek_usbh_data);
++	/* USB Device */
++	at91_add_device_udc(&ek_udc_data);
++	/* I2C */
++	at91_add_device_i2c();
++	/* NAND */
++	at91_add_device_nand(&ek_nand_data);
++	/* DM9000 ethernet */
++	ek_add_device_dm9000();
++
++	/* spi0 and mmc/sd share the same PIO pins */
++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
++	/* SPI */
++	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
++#else
++	/* MMC */
++	at91_add_device_mmc(&ek_mmc_data);
++#endif
++}
++
++MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
++	/* Maintainer: Atmel */
++	.phys_io	= AT91_BASE_SYS,
++	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++	.boot_params	= AT91_SDRAM_BASE + 0x100,
++	.timer		= &at91sam926x_timer,
++	.map_io		= ek_map_io,
++	.init_irq	= ek_init_irq,
++	.init_machine	= ek_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/clock.c linux-2.6.19/arch/arm/mach-at91rm9200/clock.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/clock.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/clock.c	Thu Nov 23 15:37:15 2006
+@@ -28,6 +28,8 @@
+ #include <asm/mach-types.h>
+ 
+ #include <asm/hardware.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/cpu.h>
+ 
+ #include "clock.h"
+ 
+@@ -41,6 +43,7 @@
+ #define clk_is_primary(x)	((x)->type & CLK_TYPE_PRIMARY)
+ #define clk_is_programmable(x)	((x)->type & CLK_TYPE_PROGRAMMABLE)
+ #define clk_is_peripheral(x)	((x)->type & CLK_TYPE_PERIPHERAL)
++#define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
+ 
+ 
+ static LIST_HEAD(clocks);
+@@ -114,13 +117,11 @@
+ static struct clk udpck = {
+ 	.name		= "udpck",
+ 	.parent		= &pllb,
+-	.pmc_mask	= AT91_PMC_UDP,
+ 	.mode		= pmc_sys_mode,
+ };
+ static struct clk uhpck = {
+ 	.name		= "uhpck",
+ 	.parent		= &pllb,
+-	.pmc_mask	= AT91_PMC_UHP,
+ 	.mode		= pmc_sys_mode,
+ };
+ 
+@@ -374,6 +375,7 @@
+ 	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+ 
+ 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
++#warning "Hard-coded PCK"
+ 	for (i = 0; i < 4; i++)
+ 		seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
+ 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+@@ -434,6 +436,12 @@
+ 		clk->mode = pmc_periph_mode;
+ 		list_add_tail(&clk->node, &clocks);
+ 	}
++	else if (clk_is_sys(clk)) {
++		clk->parent = &mck;
++		clk->mode = pmc_sys_mode;
++
++		list_add_tail(&clk->node, &clocks);
++	}
+ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+ 	else if (clk_is_programmable(clk)) {
+ 		clk->mode = pmc_sys_mode;
+@@ -586,9 +594,21 @@
+ 	 */
+ 	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ 	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
++	if (cpu_is_at91rm9200()) {
++		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
++		udpck.pmc_mask = AT91RM9200_PMC_UDP;
++		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
++		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
++	} else if (cpu_is_at91sam9260()) {
++		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
++		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
++		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
++	} else if (cpu_is_at91sam9261()) {
++		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
++		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
++		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
++	}
+ 	at91_sys_write(AT91_CKGR_PLLBR, 0);
+-	at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
+ 
+ 	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ 	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/clock.h linux-2.6.19/arch/arm/mach-at91rm9200/clock.h
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/clock.h	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/clock.h	Thu Nov 23 15:40:21 2006
+@@ -10,6 +10,7 @@
+ #define CLK_TYPE_PLL		0x2
+ #define CLK_TYPE_PROGRAMMABLE	0x4
+ #define CLK_TYPE_PERIPHERAL	0x8
++#define CLK_TYPE_SYSTEM		0x10
+ 
+ 
+ struct clk {
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/devices.c linux-2.6.19/arch/arm/mach-at91rm9200/devices.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/devices.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/devices.c	Thu Jan  1 02:00:00 1970
+@@ -1,813 +0,0 @@
+-/*
+- * arch/arm/mach-at91rm9200/devices.c
+- *
+- *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+- *  Copyright (C) 2005 David Brownell
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- *
+- */
+-#include <asm/mach/arch.h>
+-#include <asm/mach/map.h>
+-
+-#include <linux/platform_device.h>
+-
+-#include <asm/hardware.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/gpio.h>
+-
+-#include "generic.h"
+-
+-#define SZ_512	0x00000200
+-#define SZ_256	0x00000100
+-#define SZ_16	0x00000010
+-
+-/* --------------------------------------------------------------------
+- *  USB Host
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+-static u64 ohci_dmamask = 0xffffffffUL;
+-static struct at91_usbh_data usbh_data;
+-
+-static struct resource at91_usbh_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_UHP_BASE,
+-		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_UHP,
+-		.end	= AT91RM9200_ID_UHP,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct platform_device at91rm9200_usbh_device = {
+-	.name		= "at91_ohci",
+-	.id		= -1,
+-	.dev		= {
+-				.dma_mask		= &ohci_dmamask,
+-				.coherent_dma_mask	= 0xffffffff,
+-				.platform_data		= &usbh_data,
+-	},
+-	.resource	= at91_usbh_resources,
+-	.num_resources	= ARRAY_SIZE(at91_usbh_resources),
+-};
+-
+-void __init at91_add_device_usbh(struct at91_usbh_data *data)
+-{
+-	if (!data)
+-		return;
+-
+-	usbh_data = *data;
+-	platform_device_register(&at91rm9200_usbh_device);
+-}
+-#else
+-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  USB Device (Gadget)
+- * -------------------------------------------------------------------- */
+-
+-#ifdef CONFIG_USB_GADGET_AT91
+-static struct at91_udc_data udc_data;
+-
+-static struct resource at91_udc_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_BASE_UDP,
+-		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_UDP,
+-		.end	= AT91RM9200_ID_UDP,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct platform_device at91rm9200_udc_device = {
+-	.name		= "at91_udc",
+-	.id		= -1,
+-	.dev		= {
+-				.platform_data		= &udc_data,
+-	},
+-	.resource	= at91_udc_resources,
+-	.num_resources	= ARRAY_SIZE(at91_udc_resources),
+-};
+-
+-void __init at91_add_device_udc(struct at91_udc_data *data)
+-{
+-	if (!data)
+-		return;
+-
+-	if (data->vbus_pin) {
+-		at91_set_gpio_input(data->vbus_pin, 0);
+-		at91_set_deglitch(data->vbus_pin, 1);
+-	}
+-	if (data->pullup_pin)
+-		at91_set_gpio_output(data->pullup_pin, 0);
+-
+-	udc_data = *data;
+-	platform_device_register(&at91rm9200_udc_device);
+-}
+-#else
+-void __init at91_add_device_udc(struct at91_udc_data *data) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  Ethernet
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
+-static u64 eth_dmamask = 0xffffffffUL;
+-static struct at91_eth_data eth_data;
+-
+-static struct resource at91_eth_resources[] = {
+-	[0] = {
+-		.start	= AT91_VA_BASE_EMAC,
+-		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_EMAC,
+-		.end	= AT91RM9200_ID_EMAC,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct platform_device at91rm9200_eth_device = {
+-	.name		= "at91_ether",
+-	.id		= -1,
+-	.dev		= {
+-				.dma_mask		= &eth_dmamask,
+-				.coherent_dma_mask	= 0xffffffff,
+-				.platform_data		= &eth_data,
+-	},
+-	.resource	= at91_eth_resources,
+-	.num_resources	= ARRAY_SIZE(at91_eth_resources),
+-};
+-
+-void __init at91_add_device_eth(struct at91_eth_data *data)
+-{
+-	if (!data)
+-		return;
+-
+-	if (data->phy_irq_pin) {
+-		at91_set_gpio_input(data->phy_irq_pin, 0);
+-		at91_set_deglitch(data->phy_irq_pin, 1);
+-	}
+-
+-	/* Pins used for MII and RMII */
+-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* EMDIO */
+-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* EMDC */
+-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERXER */
+-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+-	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ECRS_ECRSDV */
+-	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX1 */
+-	at91_set_A_periph(AT91_PIN_PA9, 0);	/* ETX0 */
+-	at91_set_A_periph(AT91_PIN_PA8, 0);	/* ETXEN */
+-	at91_set_A_periph(AT91_PIN_PA7, 0);	/* ETXCK_EREFCK */
+-
+-	if (!data->is_rmii) {
+-		at91_set_B_periph(AT91_PIN_PB19, 0);	/* ERXCK */
+-		at91_set_B_periph(AT91_PIN_PB18, 0);	/* ECOL */
+-		at91_set_B_periph(AT91_PIN_PB17, 0);	/* ERXDV */
+-		at91_set_B_periph(AT91_PIN_PB16, 0);	/* ERX3 */
+-		at91_set_B_periph(AT91_PIN_PB15, 0);	/* ERX2 */
+-		at91_set_B_periph(AT91_PIN_PB14, 0);	/* ETXER */
+-		at91_set_B_periph(AT91_PIN_PB13, 0);	/* ETX3 */
+-		at91_set_B_periph(AT91_PIN_PB12, 0);	/* ETX2 */
+-	}
+-
+-	eth_data = *data;
+-	platform_device_register(&at91rm9200_eth_device);
+-}
+-#else
+-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  Compact Flash / PCMCIA
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+-static struct at91_cf_data cf_data;
+-
+-static struct resource at91_cf_resources[] = {
+-	[0] = {
+-		.start	= AT91_CF_BASE,
+-		/* ties up CS4, CS5 and CS6 */
+-		.end	= AT91_CF_BASE + (0x30000000 - 1),
+-		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+-	},
+-};
+-
+-static struct platform_device at91rm9200_cf_device = {
+-	.name		= "at91_cf",
+-	.id		= -1,
+-	.dev		= {
+-				.platform_data		= &cf_data,
+-	},
+-	.resource	= at91_cf_resources,
+-	.num_resources	= ARRAY_SIZE(at91_cf_resources),
+-};
+-
+-void __init at91_add_device_cf(struct at91_cf_data *data)
+-{
+-	if (!data)
+-		return;
+-
+-	/* input/irq */
+-	if (data->irq_pin) {
+-		at91_set_gpio_input(data->irq_pin, 1);
+-		at91_set_deglitch(data->irq_pin, 1);
+-	}
+-	at91_set_gpio_input(data->det_pin, 1);
+-	at91_set_deglitch(data->det_pin, 1);
+-
+-	/* outputs, initially off */
+-	if (data->vcc_pin)
+-		at91_set_gpio_output(data->vcc_pin, 0);
+-	at91_set_gpio_output(data->rst_pin, 0);
+-
+-	/* force poweron defaults for these pins ... */
+-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* A25/CFRNW */
+-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* NCS4/CFCS */
+-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* NCS5/CFCE1 */
+-	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
+-
+-	cf_data = *data;
+-	platform_device_register(&at91rm9200_cf_device);
+-}
+-#else
+-void __init at91_add_device_cf(struct at91_cf_data *data) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  MMC / SD
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_MMC_AT91RM9200) || defined(CONFIG_MMC_AT91RM9200_MODULE)
+-static u64 mmc_dmamask = 0xffffffffUL;
+-static struct at91_mmc_data mmc_data;
+-
+-static struct resource at91_mmc_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_BASE_MCI,
+-		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_MCI,
+-		.end	= AT91RM9200_ID_MCI,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct platform_device at91rm9200_mmc_device = {
+-	.name		= "at91_mci",
+-	.id		= -1,
+-	.dev		= {
+-				.dma_mask		= &mmc_dmamask,
+-				.coherent_dma_mask	= 0xffffffff,
+-				.platform_data		= &mmc_data,
+-	},
+-	.resource	= at91_mmc_resources,
+-	.num_resources	= ARRAY_SIZE(at91_mmc_resources),
+-};
+-
+-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+-{
+-	if (!data)
+-		return;
+-
+-	/* input/irq */
+-	if (data->det_pin) {
+-		at91_set_gpio_input(data->det_pin, 1);
+-		at91_set_deglitch(data->det_pin, 1);
+-	}
+-	if (data->wp_pin)
+-		at91_set_gpio_input(data->wp_pin, 1);
+-
+-	/* CLK */
+-	at91_set_A_periph(AT91_PIN_PA27, 0);
+-
+-	if (data->is_b) {
+-		/* CMD */
+-		at91_set_B_periph(AT91_PIN_PA8, 0);
+-
+-		/* DAT0, maybe DAT1..DAT3 */
+-		at91_set_B_periph(AT91_PIN_PA9, 0);
+-		if (data->wire4) {
+-			at91_set_B_periph(AT91_PIN_PA10, 0);
+-			at91_set_B_periph(AT91_PIN_PA11, 0);
+-			at91_set_B_periph(AT91_PIN_PA12, 0);
+-		}
+-	} else {
+-		/* CMD */
+-		at91_set_A_periph(AT91_PIN_PA28, 0);
+-
+-		/* DAT0, maybe DAT1..DAT3 */
+-		at91_set_A_periph(AT91_PIN_PA29, 0);
+-		if (data->wire4) {
+-			at91_set_B_periph(AT91_PIN_PB3, 0);
+-			at91_set_B_periph(AT91_PIN_PB4, 0);
+-			at91_set_B_periph(AT91_PIN_PB5, 0);
+-		}
+-	}
+-
+-	mmc_data = *data;
+-	platform_device_register(&at91rm9200_mmc_device);
+-}
+-#else
+-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  NAND / SmartMedia
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+-static struct at91_nand_data nand_data;
+-
+-static struct resource at91_nand_resources[] = {
+-	{
+-		.start	= AT91_SMARTMEDIA_BASE,
+-		.end	= AT91_SMARTMEDIA_BASE + SZ_8M - 1,
+-		.flags	= IORESOURCE_MEM,
+-	}
+-};
+-
+-static struct platform_device at91_nand_device = {
+-	.name		= "at91_nand",
+-	.id		= -1,
+-	.dev		= {
+-				.platform_data	= &nand_data,
+-	},
+-	.resource	= at91_nand_resources,
+-	.num_resources	= ARRAY_SIZE(at91_nand_resources),
+-};
+-
+-void __init at91_add_device_nand(struct at91_nand_data *data)
+-{
+-	if (!data)
+-		return;
+-
+-	/* enable pin */
+-	if (data->enable_pin)
+-		at91_set_gpio_output(data->enable_pin, 1);
+-
+-	/* ready/busy pin */
+-	if (data->rdy_pin)
+-		at91_set_gpio_input(data->rdy_pin, 1);
+-
+-	/* card detect pin */
+-	if (data->det_pin)
+-		at91_set_gpio_input(data->det_pin, 1);
+-
+-	at91_set_A_periph(AT91_PIN_PC1, 0);		/* SMOE */
+-	at91_set_A_periph(AT91_PIN_PC3, 0);		/* SMWE */
+-
+-	nand_data = *data;
+-	platform_device_register(&at91_nand_device);
+-}
+-#else
+-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  TWI (i2c)
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+-static struct platform_device at91rm9200_twi_device = {
+-	.name		= "at91_i2c",
+-	.id		= -1,
+-	.num_resources	= 0,
+-};
+-
+-void __init at91_add_device_i2c(void)
+-{
+-	/* pins used for TWI interface */
+-	at91_set_A_periph(AT91_PIN_PA25, 0);		/* TWD */
+-	at91_set_multi_drive(AT91_PIN_PA25, 1);
+-
+-	at91_set_A_periph(AT91_PIN_PA26, 0);		/* TWCK */
+-	at91_set_multi_drive(AT91_PIN_PA26, 1);
+-
+-	platform_device_register(&at91rm9200_twi_device);
+-}
+-#else
+-void __init at91_add_device_i2c(void) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  SPI
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
+-static u64 spi_dmamask = 0xffffffffUL;
+-
+-static struct resource at91_spi_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_BASE_SPI,
+-		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_SPI,
+-		.end	= AT91RM9200_ID_SPI,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct platform_device at91rm9200_spi_device = {
+-	.name		= "at91_spi",
+-	.id		= 0,
+-	.dev		= {
+-		.dma_mask		= &spi_dmamask,
+-		.coherent_dma_mask	= 0xffffffff,
+-	},
+-	.resource	= at91_spi_resources,
+-	.num_resources	= ARRAY_SIZE(at91_spi_resources),
+-};
+-
+-static const unsigned at91_spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+-
+-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+-{
+-	int i;
+-	unsigned long cs_pin;
+-
+-	at91_set_A_periph(AT91_PIN_PA0, 0);	/* MISO */
+-	at91_set_A_periph(AT91_PIN_PA1, 0);	/* MOSI */
+-	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPCK */
+-
+-	/* Enable SPI chip-selects */
+-	for (i = 0; i < nr_devices; i++) {
+-		if (devices[i].controller_data)
+-			cs_pin = (unsigned long) devices[i].controller_data;
+-		else
+-			cs_pin = at91_spi_standard_cs[devices[i].chip_select];
+-
+-#ifdef CONFIG_SPI_AT91_MANUAL_CS
+-		at91_set_gpio_output(cs_pin, 1);
+-#else
+-		at91_set_A_periph(cs_pin, 0);
+-#endif
+-
+-		/* pass chip-select pin to driver */
+-		devices[i].controller_data = (void *) cs_pin;
+-	}
+-
+-	spi_register_board_info(devices, nr_devices);
+-	at91_clock_associate("spi0_clk", &at91rm9200_spi_device.dev, "spi");
+-	platform_device_register(&at91rm9200_spi_device);
+-}
+-#else
+-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  RTC
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_RTC_DRV_AT91) || defined(CONFIG_RTC_DRV_AT91_MODULE)
+-static struct platform_device at91rm9200_rtc_device = {
+-	.name		= "at91_rtc",
+-	.id		= -1,
+-	.num_resources	= 0,
+-};
+-
+-static void __init at91_add_device_rtc(void)
+-{
+-	platform_device_register(&at91rm9200_rtc_device);
+-}
+-#else
+-static void __init at91_add_device_rtc(void) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  Watchdog
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_AT91_WATCHDOG) || defined(CONFIG_AT91_WATCHDOG_MODULE)
+-static struct platform_device at91rm9200_wdt_device = {
+-	.name		= "at91_wdt",
+-	.id		= -1,
+-	.num_resources	= 0,
+-};
+-
+-static void __init at91_add_device_watchdog(void)
+-{
+-	platform_device_register(&at91rm9200_wdt_device);
+-}
+-#else
+-static void __init at91_add_device_watchdog(void) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  LEDs
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_LEDS)
+-u8 at91_leds_cpu;
+-u8 at91_leds_timer;
+-
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+-{
+-	at91_leds_cpu	= cpu_led;
+-	at91_leds_timer	= timer_led;
+-}
+-#else
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+-#endif
+-
+-
+-/* --------------------------------------------------------------------
+- *  UART
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_SERIAL_ATMEL)
+-static struct resource dbgu_resources[] = {
+-	[0] = {
+-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91_ID_SYS,
+-		.end	= AT91_ID_SYS,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct atmel_uart_data dbgu_data = {
+-	.use_dma_tx	= 0,
+-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+-};
+-
+-static struct platform_device at91rm9200_dbgu_device = {
+-	.name		= "atmel_usart",
+-	.id		= 0,
+-	.dev		= {
+-				.platform_data	= &dbgu_data,
+-				.coherent_dma_mask = 0xffffffff,
+-	},
+-	.resource	= dbgu_resources,
+-	.num_resources	= ARRAY_SIZE(dbgu_resources),
+-};
+-
+-static inline void configure_dbgu_pins(void)
+-{
+-	at91_set_A_periph(AT91_PIN_PA30, 0);		/* DRXD */
+-	at91_set_A_periph(AT91_PIN_PA31, 1);		/* DTXD */
+-}
+-
+-static struct resource uart0_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_BASE_US0,
+-		.end	= AT91RM9200_BASE_US0 + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_US0,
+-		.end	= AT91RM9200_ID_US0,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct atmel_uart_data uart0_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-
+-static struct platform_device at91rm9200_uart0_device = {
+-	.name		= "atmel_usart",
+-	.id		= 1,
+-	.dev		= {
+-				.platform_data	= &uart0_data,
+-				.coherent_dma_mask = 0xffffffff,
+-	},
+-	.resource	= uart0_resources,
+-	.num_resources	= ARRAY_SIZE(uart0_resources),
+-};
+-
+-static inline void configure_usart0_pins(void)
+-{
+-	at91_set_A_periph(AT91_PIN_PA17, 1);		/* TXD0 */
+-	at91_set_A_periph(AT91_PIN_PA18, 0);		/* RXD0 */
+-	at91_set_A_periph(AT91_PIN_PA20, 0);		/* CTS0 */
+-
+-	/*
+-	 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+-	 *  We need to drive the pin manually.  Default is off (RTS is active low).
+-	 */
+-	at91_set_gpio_output(AT91_PIN_PA21, 1);
+-}
+-
+-static struct resource uart1_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_BASE_US1,
+-		.end	= AT91RM9200_BASE_US1 + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_US1,
+-		.end	= AT91RM9200_ID_US1,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct atmel_uart_data uart1_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-
+-static struct platform_device at91rm9200_uart1_device = {
+-	.name		= "atmel_usart",
+-	.id		= 2,
+-	.dev		= {
+-				.platform_data	= &uart1_data,
+-				.coherent_dma_mask = 0xffffffff,
+-	},
+-	.resource	= uart1_resources,
+-	.num_resources	= ARRAY_SIZE(uart1_resources),
+-};
+-
+-static inline void configure_usart1_pins(void)
+-{
+-	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RI1 */
+-	at91_set_A_periph(AT91_PIN_PB19, 0);		/* DTR1 */
+-	at91_set_A_periph(AT91_PIN_PB20, 1);		/* TXD1 */
+-	at91_set_A_periph(AT91_PIN_PB21, 0);		/* RXD1 */
+-	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD1 */
+-	at91_set_A_periph(AT91_PIN_PB24, 0);		/* CTS1 */
+-	at91_set_A_periph(AT91_PIN_PB25, 0);		/* DSR1 */
+-	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS1 */
+-}
+-
+-static struct resource uart2_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_BASE_US2,
+-		.end	= AT91RM9200_BASE_US2 + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_US2,
+-		.end	= AT91RM9200_ID_US2,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct atmel_uart_data uart2_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-
+-static struct platform_device at91rm9200_uart2_device = {
+-	.name		= "atmel_usart",
+-	.id		= 3,
+-	.dev		= {
+-				.platform_data	= &uart2_data,
+-				.coherent_dma_mask = 0xffffffff,
+-	},
+-	.resource	= uart2_resources,
+-	.num_resources	= ARRAY_SIZE(uart2_resources),
+-};
+-
+-static inline void configure_usart2_pins(void)
+-{
+-	at91_set_A_periph(AT91_PIN_PA22, 0);		/* RXD2 */
+-	at91_set_A_periph(AT91_PIN_PA23, 1);		/* TXD2 */
+-}
+-
+-static struct resource uart3_resources[] = {
+-	[0] = {
+-		.start	= AT91RM9200_BASE_US3,
+-		.end	= AT91RM9200_BASE_US3 + SZ_16K - 1,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	[1] = {
+-		.start	= AT91RM9200_ID_US3,
+-		.end	= AT91RM9200_ID_US3,
+-		.flags	= IORESOURCE_IRQ,
+-	},
+-};
+-
+-static struct atmel_uart_data uart3_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-
+-static struct platform_device at91rm9200_uart3_device = {
+-	.name		= "atmel_usart",
+-	.id		= 4,
+-	.dev		= {
+-				.platform_data	= &uart3_data,
+-				.coherent_dma_mask = 0xffffffff,
+-	},
+-	.resource	= uart3_resources,
+-	.num_resources	= ARRAY_SIZE(uart3_resources),
+-};
+-
+-static inline void configure_usart3_pins(void)
+-{
+-	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
+-	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
+-}
+-
+-struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+-struct platform_device *atmel_default_console_device;	/* the serial console device */
+-
+-void __init at91_init_serial(struct at91_uart_config *config)
+-{
+-	int i;
+-
+-	/* Fill in list of supported UARTs */
+-	for (i = 0; i < config->nr_tty; i++) {
+-		switch (config->tty_map[i]) {
+-			case 0:
+-				configure_usart0_pins();
+-				at91_uarts[i] = &at91rm9200_uart0_device;
+-				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
+-				break;
+-			case 1:
+-				configure_usart1_pins();
+-				at91_uarts[i] = &at91rm9200_uart1_device;
+-				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
+-				break;
+-			case 2:
+-				configure_usart2_pins();
+-				at91_uarts[i] = &at91rm9200_uart2_device;
+-				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
+-				break;
+-			case 3:
+-				configure_usart3_pins();
+-				at91_uarts[i] = &at91rm9200_uart3_device;
+-				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
+-				break;
+-			case 4:
+-				configure_dbgu_pins();
+-				at91_uarts[i] = &at91rm9200_dbgu_device;
+-				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
+-				break;
+-			default:
+-				continue;
+-		}
+-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+-	}
+-
+-	/* Set serial console device */
+-	if (config->console_tty < ATMEL_MAX_UART)
+-		atmel_default_console_device = at91_uarts[config->console_tty];
+-	if (!atmel_default_console_device)
+-		printk(KERN_INFO "AT91: No default serial console defined.\n");
+-}
+-
+-void __init at91_add_device_serial(void)
+-{
+-	int i;
+-
+-	for (i = 0; i < ATMEL_MAX_UART; i++) {
+-		if (at91_uarts[i])
+-			platform_device_register(at91_uarts[i]);
+-	}
+-}
+-#else
+-void __init at91_init_serial(struct at91_uart_config *config) {}
+-void __init at91_add_device_serial(void) {}
+-#endif
+-
+-
+-/* -------------------------------------------------------------------- */
+-
+-/*
+- * These devices are always present and don't need any board-specific
+- * setup.
+- */
+-static int __init at91_add_standard_devices(void)
+-{
+-	at91_add_device_rtc();
+-	at91_add_device_watchdog();
+-	return 0;
+-}
+-
+-arch_initcall(at91_add_standard_devices);
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/generic.h linux-2.6.19/arch/arm/mach-at91rm9200/generic.h
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/generic.h	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/generic.h	Wed Nov 15 09:01:27 2006
+@@ -10,14 +10,19 @@
+ 
+  /* Processors */
+ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
++extern void __init at91sam9260_initialize(unsigned long main_clock);
++extern void __init at91sam9261_initialize(unsigned long main_clock);
+ 
+  /* Interrupts */
+ extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
++extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
++extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+ extern void __init at91_aic_init(unsigned int priority[]);
+ 
+  /* Timer */
+ struct sys_timer;
+ extern struct sys_timer at91rm9200_timer;
++extern struct sys_timer at91sam926x_timer;
+ 
+  /* Clocks */
+ extern int __init at91_clock_init(unsigned long main_clock);
+@@ -39,3 +44,6 @@
+ };
+ extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
+ extern void __init at91_gpio_irq_setup(void);
++
++extern void (*at91_arch_reset)(void);
++extern int at91_extern_irq;
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/gpio.c linux-2.6.19/arch/arm/mach-at91rm9200/gpio.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/gpio.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/gpio.c	Wed Nov  1 12:37:25 2006
+@@ -19,6 +19,8 @@
+ 
+ #include <asm/io.h>
+ #include <asm/hardware.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/at91_pmc.h>
+ #include <asm/arch/gpio.h>
+ 
+ #include "generic.h"
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/ics1523.c linux-2.6.19/arch/arm/mach-at91rm9200/ics1523.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/ics1523.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/ics1523.c	Tue Oct 24 14:59:00 2006
+@@ -0,0 +1,227 @@
++/*
++ * arch/arm/mach-at91rm9200/ics1523.c
++ *
++ *  Copyright (C) 2003 ATMEL Rousset
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <linux/delay.h>
++
++#include <asm/arch/ics1523.h>
++#include <asm/arch/at91_twi.h>
++#include <asm/arch/gpio.h>
++
++/* TWI Errors */
++#define	AT91_TWI_ERROR	(AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
++
++
++//-----------------------------------------------------------------------------
++//
++// TWI Register access
++//
++//-----------------------------------------------------------------------------
++
++static inline unsigned long at91_twi_read(unsigned int reg)
++{
++	void __iomem *twi_base = (void __iomem *)AT91_VA_BASE_TWI;
++
++	return __raw_readl(twi_base + reg);
++}
++
++static inline void at91_twi_write(unsigned int reg, unsigned long value)
++{
++	void __iomem *twi_base = (void __iomem *)AT91_VA_BASE_TWI;
++
++	__raw_writel(value, twi_base + reg);
++}
++
++//-----------------------------------------------------------------------------
++//
++// Initialization of TWI CLOCK
++//
++//-----------------------------------------------------------------------------
++
++static void AT91F_SetTwiClock(unsigned int mck_khz)
++{
++	int sclock;
++
++	/* Here, CKDIV = 1 and CHDIV = CLDIV  ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
++	sclock = (10*mck_khz /ICS_TRANSFER_RATE);
++	if (sclock % 10 >= 5)
++		sclock = (sclock /10) - 5;
++	else
++		sclock = (sclock /10)- 6;
++	sclock = (sclock + (4 - sclock %4)) >> 2;	// div 4
++
++	at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
++}
++
++//-----------------------------------------------------------------------------
++//
++// Read a byte with TWI Interface from the Clock Generator ICS1523
++//
++//-----------------------------------------------------------------------------
++
++static int AT91F_ICS1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
++{
++	int Status, nb_trial;
++
++	at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADD << 16) & AT91_TWI_DADR));
++	at91_twi_write(AT91_TWI_IADR, reg_address);
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++	// Program temporizing period (300us)
++	udelay(300);
++
++	// Wait TXcomplete ...
++	nb_trial = 0;
++	Status = at91_twi_read(AT91_TWI_SR);
++	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++		nb_trial++;
++		Status = at91_twi_read(AT91_TWI_SR);
++	}
++
++	if (Status & AT91_TWI_TXCOMP) {
++		*data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
++		return ((int) ICS1523_ACCESS_OK);
++	}
++	return ((int) ICS1523_ACCESS_ERROR);
++}
++
++//-----------------------------------------------------------------------------
++//
++// Write a byte with TWI Interface to the Clock Generator ICS1523
++//
++//-----------------------------------------------------------------------------
++
++static int AT91F_ICS1523_WriteByte(unsigned char reg_address, unsigned char data_out)
++{
++	int Status, nb_trial;
++
++	at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADD << 16) & AT91_TWI_DADR));
++	at91_twi_write(AT91_TWI_IADR, reg_address);
++	at91_twi_write(AT91_TWI_THR, data_out);
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++	// Program temporizing period (300us)
++	udelay(300);
++
++	nb_trial = 0;
++	Status = at91_twi_read(AT91_TWI_SR);
++	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++		nb_trial++;
++		if (Status & AT91_TWI_ERROR) {
++			// Si Under run OR NACK Start again
++			at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++			//  Program temporizing period (300us)
++			udelay(300);
++		}
++		Status = at91_twi_read(AT91_TWI_SR);
++	};
++
++	if (Status & AT91_TWI_TXCOMP)
++		return ((int) ICS1523_ACCESS_OK);
++	else
++		return ((int) ICS1523_ACCESS_ERROR);
++}
++
++//-----------------------------------------------------------------------------
++//
++// Initialization of the Clock Generator ICS1523
++//
++//-----------------------------------------------------------------------------
++
++int AT91F_ICS1523_clockinit(void)
++{
++	int		ack, nb_trial, error_status;
++	unsigned int	status = 0xffffffff;
++	struct clk	*twi_clk;
++
++	error_status = (int) ICS1523_ACCESS_OK;
++
++	/* pins used for TWI interface */
++	at91_set_A_periph(AT91_PIN_PA25, 0);            /* TWD */
++	at91_set_multi_drive(AT91_PIN_PA25, 1);
++	at91_set_A_periph(AT91_PIN_PA26, 0);            /* TWCK */
++	at91_set_multi_drive(AT91_PIN_PA26, 1);
++
++	// Enable the TWI clock.
++	twi_clk = clk_get(NULL, "twi_clk");
++	if (IS_ERR(twi_clk))
++		return ICS1523_ACCESS_ERROR;
++	clk_enable(twi_clk);
++
++	// Disable interrupts
++	at91_twi_write(AT91_TWI_IDR, -1);
++
++	// Reset peripheral
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
++
++	// Set Master mode
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
++
++	// Set TWI Clock Waveform Generator Register
++	AT91F_SetTwiClock(60000);     // MCK in KHz = 60000 KHz
++
++	// ICS1523 Initialisation
++	ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
++	error_status |= ack;
++	ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
++	error_status |= ack;
++	ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
++	error_status |= ack;
++	ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
++	error_status |= ack;
++
++	nb_trial = 0;
++	do {
++		nb_trial++;
++		ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
++		error_status |= ack;
++		ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
++		error_status |= ack;
++		ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
++		error_status |= ack;
++		ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
++		error_status |= ack;
++		ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
++		error_status |= ack;
++
++		// Program 1ms temporizing period
++		mdelay(1);
++
++		AT91F_ICS1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
++	} while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
++
++	ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
++	error_status |= ack;
++	ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
++	error_status |= ack;
++
++	/* Program 1ms temporizing period */
++	mdelay(1);
++
++	ack = AT91F_ICS1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
++	error_status |= ack;
++
++	/* Program 1ms temporizing period */
++	mdelay(1);
++
++	return (error_status);
++}
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/irq.c linux-2.6.19/arch/arm/mach-at91rm9200/irq.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/irq.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/irq.c	Wed Nov  1 12:40:39 2006
+@@ -47,6 +47,10 @@
+ 	at91_sys_write(AT91_AIC_IECR, 1 << irq);
+ }
+ 
++unsigned int at91_extern_irq;
++
++#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
++
+ static int at91_aic_set_type(unsigned irq, unsigned type)
+ {
+ 	unsigned int smr, srctype;
+@@ -59,14 +63,16 @@
+ 		srctype = AT91_AIC_SRCTYPE_RISING;
+ 		break;
+ 	case IRQT_LOW:
+-		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
++		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
++			srctype = AT91_AIC_SRCTYPE_LOW;
++		else
+ 			return -EINVAL;
+-		srctype = AT91_AIC_SRCTYPE_LOW;
+ 		break;
+ 	case IRQT_FALLING:
+-		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
++		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
++			srctype = AT91_AIC_SRCTYPE_FALLING;
++		else
+ 			return -EINVAL;
+-		srctype = AT91_AIC_SRCTYPE_FALLING;
+ 		break;
+ 	default:
+ 		return -EINVAL;
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/pm.c linux-2.6.19/arch/arm/mach-at91rm9200/pm.c
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/pm.c	Mon Dec  4 16:39:29 2006
++++ linux-2.6.19/arch/arm/mach-at91rm9200/pm.c	Thu Nov 16 11:51:41 2006
+@@ -26,7 +26,10 @@
+ #include <asm/mach/irq.h>
+ #include <asm/mach-types.h>
+ 
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91rm9200_mc.h>
+ #include <asm/arch/gpio.h>
++#include <asm/arch/cpu.h>
+ 
+ #include "generic.h"
+ 
+@@ -60,6 +63,7 @@
+  * Verify that all the clocks are correct before entering
+  * slow-clock mode.
+  */
++#warning "SAM9260 only has 3 programmable clocks."
+ static int at91_pm_verify_clocks(void)
+ {
+ 	unsigned long scsr;
+@@ -68,9 +72,15 @@
+ 	scsr = at91_sys_read(AT91_PMC_SCSR);
+ 
+ 	/* USB must not be using PLLB */
+-	if ((scsr & (AT91_PMC_UHP | AT91_PMC_UDP)) != 0) {
+-		pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+-		return 0;
++	if (cpu_is_at91rm9200()) {
++		if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
++			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
++			return 0;
++		}
++	} else if (cpu_is_at91sam9261()) {
++#warning "Check SAM9261 USB clocks"
++	} else if (cpu_is_at91sam9260()) {
++#warning "Check SAM9260 USB clocks"
+ 	}
+ 
+ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+@@ -112,7 +122,6 @@
+ static void (*slow_clock)(void);
+ 
+ 
+-
+ static int at91_pm_enter(suspend_state_t state)
+ {
+ 	at91_gpio_suspend();
+@@ -123,13 +132,7 @@
+ 			(at91_sys_read(AT91_PMC_PCSR)
+ 					| (1 << AT91_ID_FIQ)
+ 					| (1 << AT91_ID_SYS)
+-					| (1 << AT91RM9200_ID_IRQ0)
+-					| (1 << AT91RM9200_ID_IRQ1)
+-					| (1 << AT91RM9200_ID_IRQ2)
+-					| (1 << AT91RM9200_ID_IRQ3)
+-					| (1 << AT91RM9200_ID_IRQ4)
+-					| (1 << AT91RM9200_ID_IRQ5)
+-					| (1 << AT91RM9200_ID_IRQ6))
++					| (at91_extern_irq))
+ 				& at91_sys_read(AT91_AIC_IMR),
+ 			state);
+ 
+@@ -203,16 +206,23 @@
+ 	.enter		= at91_pm_enter,
+ };
+ 
++#ifdef CONFIG_AT91_SLOW_CLOCK
++extern void at91rm9200_slow_clock(void);
++extern u32 at91rm9200_slow_clock_sz;
++#endif
++
+ static int __init at91_pm_init(void)
+ {
+-	printk("AT91: Power Management\n");
+-
+-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
+-	/* REVISIT allocations of SRAM should be dynamically managed.
++#ifdef CONFIG_AT91_SLOW_CLOCK
++	/*
++	 * REVISIT allocations of SRAM should be dynamically managed.
+ 	 * FIQ handlers and other components will want SRAM/TCM too...
+ 	 */
+-	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
++	slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
+ 	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
++	printk("AT91: Power Management (with slow clock mode)\n");
++#else
++	printk("AT91: Power Management\n");	
+ #endif
+ 
+ 	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
+diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/pm_slowclock.S linux-2.6.19/arch/arm/mach-at91rm9200/pm_slowclock.S
+--- linux-2.6.19-final/arch/arm/mach-at91rm9200/pm_slowclock.S	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/arch/arm/mach-at91rm9200/pm_slowclock.S	Thu Nov 16 11:47:10 2006
+@@ -0,0 +1,170 @@
++/*
++ * arch/arm/mach-at91rm9200/pm_slow_clock.S
++ *
++ *  Copyright (C) 2006 Savin Zlobec
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/linkage.h>
++#include <asm/hardware.h>
++
++#define MCKRDY_TIMEOUT		1000
++#define MOSCRDY_TIMEOUT 	1000
++#define PLLALOCK_TIMEOUT	1000
++
++	.macro wait_mckrdy
++	mov	r2, #MCKRDY_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_MCKRDY
++	beq	1b
++2:
++	.endm
++
++	.macro wait_moscrdy
++	mov	r2, #MOSCRDY_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_MOSCS
++	beq	1b
++2:
++	.endm
++
++	.macro wait_pllalock
++	mov	r2, #PLLALOCK_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_LOCKA
++	beq	1b
++2:
++	.endm
++
++	.macro wait_plladis
++	mov	r2, #PLLALOCK_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_LOCKA
++	bne	1b
++2:
++	.endm
++
++	.text
++
++ENTRY(at91rm9200_slow_clock)
++
++	ldr	r1, .at91_va_base_sys
++
++	/* Put SDRAM in self refresh mode */
++
++	b	1f
++	.align	5
++1:	mcr	p15, 0, r0, c7, c10, 4
++	mov	r2, #1
++	str	r2, [r1, #AT91_SDRAMC_SRR]
++
++	/* Save Master clock setting */
++
++	ldr	r2, [r1, #AT91_PMC_MCKR]
++	str	r2, .saved_mckr
++
++	/*
++	 * Set the Master clock source to slow clock
++	 *
++	 * First set the CSS field, wait for MCKRDY
++	 * and than set the PRES and MDIV fields.
++	 *
++	 * See eratta #2[78] for details.
++	 */
++
++	bic	r2, r2, #3
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	wait_mckrdy
++
++	mov	r2, #0
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	/* Save PLLA setting and disable it */
++
++	ldr	r2, [r1, #AT91_CKGR_PLLAR]
++	str	r2, .saved_pllar
++
++	mov	r2, #0
++	str	r2, [r1, #AT91_CKGR_PLLAR]
++
++	wait_plladis
++
++	/* Turn off the main oscillator */
++
++	ldr	r2, [r1, #AT91_CKGR_MOR]
++	bic	r2, r2, #AT91_PMC_MOSCEN
++	str	r2, [r1, #AT91_CKGR_MOR]
++
++	/* Wait for interrupt */
++
++	mcr	p15, 0, r0, c7, c0, 4
++
++	/* Turn on the main oscillator */
++
++	ldr	r2, [r1, #AT91_CKGR_MOR]
++	orr	r2, r2, #AT91_PMC_MOSCEN
++	str	r2, [r1, #AT91_CKGR_MOR]
++
++	wait_moscrdy
++
++	/* Restore PLLA setting */
++
++	ldr	r2, .saved_pllar
++	str	r2, [r1, #AT91_CKGR_PLLAR]
++
++	wait_pllalock
++
++	/*
++	 * Restore master clock setting
++	 *
++	 * First set PRES if it was not 0,
++	 * than set CSS and MDIV fields.
++	 * After every change wait for
++	 * MCKRDY.
++	 *
++	 * See eratta #2[78] for details.
++	 */
++
++	ldr	r2, .saved_mckr
++	tst	r2, #0x1C
++	beq	2f
++	and	r2, r2, #0x1C
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	wait_mckrdy
++
++2:	ldr	r2, .saved_mckr
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	wait_mckrdy
++
++	mov	pc, lr
++
++.saved_mckr:
++	.word 0
++
++.saved_pllar:
++	.word 0
++
++.at91_va_base_sys:
++	.word AT91_VA_BASE_SYS
++
++ENTRY(at91rm9200_slow_clock_sz)
++	.word .-at91rm9200_slow_clock
+diff -urN -x CVS linux-2.6.19-final/drivers/char/Kconfig linux-2.6.19/drivers/char/Kconfig
+--- linux-2.6.19-final/drivers/char/Kconfig	Mon Dec  4 16:39:54 2006
++++ linux-2.6.19/drivers/char/Kconfig	Thu Nov 16 16:34:39 2006
+@@ -1048,5 +1048,21 @@
+ 	  sysfs directory, /sys/devices/platform/telco_clock, with a number of
+ 	  files for controlling the behavior of this hardware.
+ 
++config AT91_SPI
++	bool "SPI driver (legacy) for AT91RM9200 processors"
++	depends on ARCH_AT91RM9200
++	default y
++	help
++	  The SPI driver gives access to this serial bus on the AT91RM9200
++	  processor.
++
++config AT91_SPIDEV
++	bool "SPI device interface (legacy) for AT91RM9200 processors"
++	depends on ARCH_AT91RM9200 && AT91_SPI
++	default n
++	help
++	  The SPI driver gives user mode access to this serial
++	  bus on the AT91RM9200 processor.
++
+ endmenu
+ 
+diff -urN -x CVS linux-2.6.19-final/drivers/char/Makefile linux-2.6.19/drivers/char/Makefile
+--- linux-2.6.19-final/drivers/char/Makefile	Mon Dec  4 16:39:54 2006
++++ linux-2.6.19/drivers/char/Makefile	Thu Oct 12 17:07:38 2006
+@@ -90,6 +90,8 @@
+ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
++obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
++obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
+ 
+ obj-$(CONFIG_WATCHDOG)		+= watchdog/
+ obj-$(CONFIG_MWAVE)		+= mwave/
+diff -urN -x CVS linux-2.6.19-final/drivers/char/at91_spi.c linux-2.6.19/drivers/char/at91_spi.c
+--- linux-2.6.19-final/drivers/char/at91_spi.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/char/at91_spi.c	Tue Oct 24 14:31:50 2006
+@@ -0,0 +1,336 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
++ *
++ *  Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/dma-mapping.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <asm/io.h>
++#include <asm/semaphore.h>
++
++#include <asm/arch/at91_spi.h>
++#include <asm/arch/at91_pdc.h>
++#include <asm/arch/board.h>
++#include <asm/arch/spi.h>
++
++#undef DEBUG_SPI
++
++static struct spi_local spi_dev[NR_SPI_DEVICES];	/* state of the SPI devices */
++static int spi_enabled = 0;
++static struct semaphore spi_lock;			/* protect access to SPI bus */
++static int current_device = -1;				/* currently selected SPI device */
++static struct clk *spi_clk;				/* SPI clock */
++static void __iomem *spi_base;				/* SPI peripheral base-address */
++
++DECLARE_COMPLETION(transfer_complete);
++
++
++#define at91_spi_read(reg)		__raw_readl(spi_base + (reg))
++#define at91_spi_write(reg, val)	__raw_writel((val), spi_base + (reg))
++
++
++/* ......................................................................... */
++
++/*
++ * Access and enable the SPI bus.
++ * This MUST be called before any transfers are performed.
++ */
++void spi_access_bus(short device)
++{
++	/* Ensure that requested device is valid */
++	if ((device < 0) || (device >= NR_SPI_DEVICES))
++		panic("at91_spi: spi_access_bus called with invalid device");
++
++	if (spi_enabled == 0) {
++		clk_enable(spi_clk);				/* Enable Peripheral clock */
++		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);	/* Enable SPI */
++#ifdef DEBUG_SPI
++		printk("SPI on\n");
++#endif
++	}
++	spi_enabled++;
++
++	/* Lock the SPI bus */
++	down(&spi_lock);
++	current_device = device;
++
++	/* Configure SPI bus for device */
++	at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
++}
++
++/*
++ * Relinquish control of the SPI bus.
++ */
++void spi_release_bus(short device)
++{
++	if (device != current_device)
++		panic("at91_spi: spi_release called with invalid device");
++
++	/* Release the SPI bus */
++	current_device = -1;
++	up(&spi_lock);
++
++	spi_enabled--;
++	if (spi_enabled == 0) {
++		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);	/* Disable SPI */
++		clk_disable(spi_clk);				/* Disable Peripheral clock */
++#ifdef DEBUG_SPI
++		printk("SPI off\n");
++#endif
++	}
++}
++
++/*
++ * Perform a data transfer over the SPI bus
++ */
++int spi_transfer(struct spi_transfer_list* list)
++{
++	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++	int tx_size;
++
++	if (!list)
++		panic("at91_spi: spi_transfer called with NULL transfer list");
++	if (current_device == -1)
++		panic("at91_spi: spi_transfer called without acquiring bus");
++
++#ifdef DEBUG_SPI
++	printk("SPI transfer start [%i]\n", list->nr_transfers);
++#endif
++
++	/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++	tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++	/* Store transfer list */
++	device->xfers = list;
++	list->curr = 0;
++
++	/* Assume there must be at least one transfer */
++	device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
++	device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
++
++	/* Program PDC registers */
++	at91_spi_write(AT91_PDC_TPR, device->tx);
++	at91_spi_write(AT91_PDC_RPR, device->rx);
++	at91_spi_write(AT91_PDC_TCR, list->txlen[0] / tx_size);
++	at91_spi_write(AT91_PDC_RCR, list->rxlen[0] / tx_size);
++
++	/* Is there a second transfer? */
++	if (list->nr_transfers > 1) {
++		device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
++		device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
++
++		/* Program Next PDC registers */
++		at91_spi_write(AT91_PDC_TNPR, device->txnext);
++		at91_spi_write(AT91_PDC_RNPR, device->rxnext);
++		at91_spi_write(AT91_PDC_TNCR, list->txlen[1] / tx_size);
++		at91_spi_write(AT91_PDC_RNCR, list->rxlen[1] / tx_size);
++	}
++	else {
++		device->txnext = 0;
++		device->rxnext = 0;
++		at91_spi_write(AT91_PDC_TNCR, 0);
++		at91_spi_write(AT91_PDC_RNCR, 0);
++	}
++
++	// TODO: If we are doing consecutive transfers (at high speed, or
++	//   small buffers), then it might be worth modifying the 'Delay between
++	//   Consecutive Transfers' in the CSR registers.
++	//   This is an issue if we cannot chain the next buffer fast enough
++	//   in the interrupt handler.
++
++	/* Enable transmitter and receiver */
++	at91_spi_write(AT91_PDC_PTCR, AT91_PDC_RXTEN | AT91_PDC_TXTEN);
++
++	at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX);		/* enable buffer complete interrupt */
++	wait_for_completion(&transfer_complete);
++
++#ifdef DEBUG_SPI
++	printk("SPI transfer end\n");
++#endif
++
++	return 0;
++}
++
++/* ......................................................................... */
++
++/*
++ * Handle interrupts from the SPI controller.
++ */
++static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
++{
++	unsigned int status;
++	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++	struct spi_transfer_list *list = device->xfers;
++
++#ifdef DEBUG_SPI
++	printk("SPI interrupt %i\n", current_device);
++#endif
++
++	if (!list)
++		panic("at91_spi: spi_interrupt with a NULL transfer list");
++
++		status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR);	/* read status */
++
++	dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
++	dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
++
++	device->tx = device->txnext;	/* move next transfer to current transfer */
++	device->rx = device->rxnext;
++
++	list->curr = list->curr + 1;
++	if (list->curr == list->nr_transfers) {		/* all transfers complete */
++		at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX);		/* disable interrupt */
++
++		/* Disable transmitter and receiver */
++		at91_spi_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++
++		device->xfers = NULL;
++		complete(&transfer_complete);
++	}
++	else if (list->curr+1 == list->nr_transfers) {	/* no more next transfers */
++		device->txnext = 0;
++		device->rxnext = 0;
++		at91_spi_write(AT91_PDC_TNCR, 0);
++		at91_spi_write(AT91_PDC_RNCR, 0);
++	}
++	else {
++		int i = (list->curr)+1;
++
++		/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++		int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++		device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
++		device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
++		at91_spi_write(AT91_PDC_TNPR, device->txnext);
++		at91_spi_write(AT91_PDC_RNPR, device->rxnext);
++		at91_spi_write(AT91_PDC_TNCR, list->txlen[i] / tx_size);
++		at91_spi_write(AT91_PDC_RNCR, list->rxlen[i] / tx_size);
++	}
++	return IRQ_HANDLED;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize the SPI controller
++ */
++static int __init at91spi_probe(struct platform_device *pdev)
++{
++	int i;
++	unsigned long scbr;
++	struct resource *res;
++
++	init_MUTEX(&spi_lock);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENXIO;
++		
++	if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
++		return -EBUSY;
++
++	spi_base = ioremap(res->start, res->end - res->start + 1);
++	if (!spi_base) {
++		release_mem_region(res->start, res->end - res->start + 1);
++		return -ENOMEM;
++	}
++
++	spi_clk = clk_get(NULL, "spi_clk");
++	if (IS_ERR(spi_clk)) {
++		printk(KERN_ERR "at91_spi: no clock defined\n");
++		iounmap(spi_base);
++		release_mem_region(res->start, res->end - res->start + 1);
++		return -ENODEV;
++	}
++
++	at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST);	/* software reset of SPI controller */
++	
++	/*
++	 * Calculate the correct SPI baud-rate divisor.
++	 */
++	scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
++	scbr = scbr + 1;		/* round up */
++
++	printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
++
++	/* Set Chip Select registers to good defaults */
++	for (i = 0; i < 4; i++) {
++		at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
++	}
++
++	at91_spi_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++
++	memset(&spi_dev, 0, sizeof(spi_dev));
++	spi_dev[0].pcs = 0xE;
++	spi_dev[1].pcs = 0xD;
++	spi_dev[2].pcs = 0xB;
++	spi_dev[3].pcs = 0x7;
++
++	if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
++		clk_put(spi_clk);
++		iounmap(spi_base);
++		release_mem_region(res->start, res->end - res->start + 1);
++		return -EBUSY;
++	}
++
++	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);		/* Enable SPI */
++
++	return 0;
++}
++
++static int __devexit at91spi_remove(struct platform_device *pdev)
++{
++	struct resource *res;
++
++	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);		/* Disable SPI */
++	clk_put(spi_clk);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	iounmap(spi_base);
++	release_mem_region(res->start, res->end - res->start + 1);
++
++	free_irq(AT91RM9200_ID_SPI, 0);
++	return 0;
++}
++
++static struct platform_driver at91spi_driver = {
++	.probe		= at91spi_probe,
++	.remove		= __devexit_p(at91spi_remove),
++	.driver		= {
++		.name	= "at91_spi",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91spi_init(void)
++{
++	return platform_driver_register(&at91spi_driver);
++}
++
++static void __exit at91spi_exit(void)
++{
++	platform_driver_unregister(&at91spi_driver);
++}
++
++EXPORT_SYMBOL(spi_access_bus);
++EXPORT_SYMBOL(spi_release_bus);
++EXPORT_SYMBOL(spi_transfer);
++
++module_init(at91spi_init);
++module_exit(at91spi_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
+diff -urN -x CVS linux-2.6.19-final/drivers/char/at91_spidev.c linux-2.6.19/drivers/char/at91_spidev.c
+--- linux-2.6.19-final/drivers/char/at91_spidev.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/char/at91_spidev.c	Tue Oct 24 14:58:33 2006
+@@ -0,0 +1,236 @@
++/*
++ * User-space interface to the SPI bus on Atmel AT91RM9200
++ *
++ *  Copyright (C) 2003 SAN People (Pty) Ltd
++ *
++ * Based on SPI driver by Rick Bronson
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <asm/arch/spi.h>
++
++#ifdef CONFIG_DEVFS_FS
++#include <linux/devfs_fs_kernel.h>
++#endif
++
++
++#undef DEBUG_SPIDEV
++
++/* ......................................................................... */
++
++/*
++ * Read or Write to SPI bus.
++ */
++static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
++{
++	unsigned int spi_device = (unsigned int) file->private_data;
++
++	struct mm_struct * mm;
++	struct page ** maplist;
++	struct spi_transfer_list* list;
++	int    pgcount;
++
++	unsigned int ofs, pagelen;
++	int res, i, err;
++
++	if (!count) {
++		return 0;
++	}
++
++	list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++	if (!list) {
++		return -ENOMEM;
++	}
++
++	mm = current->mm;
++
++	pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
++
++	if (pgcount >= MAX_SPI_TRANSFERS) {
++		kfree(list);
++		return -EFBIG;
++	}
++
++	maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
++
++	if (!maplist) {
++		kfree(list);
++		return -ENOMEM;
++	}
++	flush_cache_all();
++	down_read(&mm->mmap_sem);
++	err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
++	up_read(&mm->mmap_sem);
++
++	if (err < 0) {
++		kfree(list);
++		kfree(maplist);
++		return err;
++	}
++	pgcount = err;
++
++#ifdef DEBUG_SPIDEV
++	printk("spidev_rd_rw: %i %i\n", count, pgcount);
++#endif
++
++	/* Set default return value = transfer length */
++	res = count;
++
++	/*
++	 * At this point, the virtual area buf[0] .. buf[count-1] will have
++	 * corresponding pages mapped in the physical memory and locked until
++	 * we unmap the kiobuf.  The pages cannot be swapped out or moved
++	 * around.
++	 */
++	ofs = (unsigned long) buf & (PAGE_SIZE -1);
++	pagelen = PAGE_SIZE - ofs;
++	if (count < pagelen)
++		pagelen = count;
++
++	for (i = 0; i < pgcount; i++) {
++		flush_dcache_page(maplist[i]);
++
++		list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
++		list->txlen[i] = list->rxlen[i] = pagelen;
++
++#ifdef DEBUG_SPIDEV
++		printk("  %i: %x  (%i)\n", i, list->tx[i], list->txlen[i]);
++#endif
++
++		ofs = 0;	/* all subsequent transfers start at beginning of a page */
++		count = count - pagelen;
++		pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
++	}
++	list->nr_transfers = pgcount;
++
++	/* Perform transfer on SPI bus */
++	spi_access_bus(spi_device);
++	spi_transfer(list);
++	spi_release_bus(spi_device);
++
++	while (pgcount--) {
++		page_cache_release (maplist[pgcount]);
++	}
++	flush_cache_all();
++
++	kfree(maplist);
++	kfree(list);
++
++	return res;
++}
++
++static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++	int spi_device = MINOR(inode->i_rdev);
++
++	if (spi_device >= NR_SPI_DEVICES)
++		return -ENODEV;
++
++	// TODO: This interface can be used to configure the SPI bus.
++	// Configurable options could include: Speed, Clock Polarity, Clock Phase
++
++	switch(cmd) {
++		default:
++			return -ENOIOCTLCMD;
++	}
++}
++
++/*
++ * Open the SPI device
++ */
++static int spidev_open(struct inode *inode, struct file *file)
++{
++	unsigned int spi_device = MINOR(inode->i_rdev);
++
++	if (spi_device >= NR_SPI_DEVICES)
++		return -ENODEV;
++
++	/*
++	 * 'private_data' is actually a pointer, but we overload it with the
++	 * value we want to store.
++	 */
++	file->private_data = (void *)spi_device;
++
++	return 0;
++}
++
++/*
++ * Close the SPI device
++ */
++static int spidev_close(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++/* ......................................................................... */
++
++static struct file_operations spidev_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.read		= spidev_rd_wr,
++	.write		= (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
++	.ioctl		= spidev_ioctl,
++	.open		= spidev_open,
++	.release	= spidev_close,
++};
++
++/*
++ * Install the SPI /dev interface driver
++ */
++static int __init at91_spidev_init(void)
++{
++#ifdef CONFIG_DEVFS_FS
++	int i;
++#endif
++
++	if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
++		printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
++		return -EIO;
++	}
++
++#ifdef CONFIG_DEVFS_FS
++	devfs_mk_dir("spi");
++	for (i = 0; i < NR_SPI_DEVICES; i++) {
++		devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
++	}
++#endif
++	printk(KERN_INFO "AT91 SPI driver loaded\n");
++
++	return 0;
++}
++
++/*
++ * Remove the SPI /dev interface driver
++ */
++static void __exit at91_spidev_exit(void)
++{
++#ifdef CONFIG_DEVFS_FS
++	int i;
++	for (i = 0; i < NR_SPI_DEVICES; i++) {
++		devfs_remove("spi/%d", i);
++	}
++
++	devfs_remove("spi");
++#endif
++
++	if (unregister_chrdev(SPI_MAJOR, "spi")) {
++		printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
++		return;
++	}
++}
++
++module_init(at91_spidev_init);
++module_exit(at91_spidev_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
+diff -urN -x CVS linux-2.6.19-final/drivers/char/watchdog/at91rm9200_wdt.c linux-2.6.19/drivers/char/watchdog/at91rm9200_wdt.c
+--- linux-2.6.19-final/drivers/char/watchdog/at91rm9200_wdt.c	Mon Dec  4 16:39:59 2006
++++ linux-2.6.19/drivers/char/watchdog/at91rm9200_wdt.c	Wed Nov  8 12:40:58 2006
+@@ -21,6 +21,7 @@
+ #include <linux/watchdog.h>
+ #include <asm/bitops.h>
+ #include <asm/uaccess.h>
++#include <asm/arch/at91_st.h>
+ 
+ 
+ #define WDT_DEFAULT_TIME	5	/* seconds */
+diff -urN -x CVS linux-2.6.19-final/drivers/i2c/busses/Kconfig linux-2.6.19/drivers/i2c/busses/Kconfig
+--- linux-2.6.19-final/drivers/i2c/busses/Kconfig	Mon Dec  4 16:40:01 2006
++++ linux-2.6.19/drivers/i2c/busses/Kconfig	Thu Oct 12 17:07:38 2006
+@@ -74,6 +74,13 @@
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called i2c-amd8111.
+ 
++config I2C_AT91
++	tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
++	depends on I2C && ARCH_AT91 && EXPERIMENTAL
++	help
++	  This supports the use of the I2C interface on Atmel AT91
++	  processors.
++
+ config I2C_AU1550
+ 	tristate "Au1550/Au1200 SMBus interface"
+ 	depends on I2C && (SOC_AU1550 || SOC_AU1200)
+@@ -520,6 +527,14 @@
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called i2c-voodoo3.
+ 
++config I2C_PCA
++	tristate "PCA9564"
++	depends on I2C
++	select I2C_ALGOPCA
++	help
++	  This driver support the Philips PCA 9564 Parallel bus to I2C
++	  bus controller.
++
+ config I2C_PCA_ISA
+ 	tristate "PCA9564 on an ISA bus"
+ 	depends on I2C
+diff -urN -x CVS linux-2.6.19-final/drivers/i2c/busses/Makefile linux-2.6.19/drivers/i2c/busses/Makefile
+--- linux-2.6.19-final/drivers/i2c/busses/Makefile	Mon Dec  4 16:40:01 2006
++++ linux-2.6.19/drivers/i2c/busses/Makefile	Thu Oct 12 17:07:38 2006
+@@ -8,6 +8,7 @@
+ obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
+ obj-$(CONFIG_I2C_AMD756_S4882)	+= i2c-amd756-s4882.o
+ obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
++obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
+ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
+ obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
+ obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
+@@ -27,6 +28,7 @@
+ obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
+ obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
+ obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
++obj-$(CONFIG_I2C_PCA)		+= i2c-pca.o
+ obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+ obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+ obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
+diff -urN -x CVS linux-2.6.19-final/drivers/i2c/busses/i2c-at91.c linux-2.6.19/drivers/i2c/busses/i2c-at91.c
+--- linux-2.6.19-final/drivers/i2c/busses/i2c-at91.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/i2c/busses/i2c-at91.c	Fri Nov 10 09:18:41 2006
+@@ -0,0 +1,325 @@
++/*
++    i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
++
++    Copyright (C) 2004 Rick Bronson
++    Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
++
++    Borrowed heavily from original work by:
++    Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
++
++    This program is free software; you can redistribute it and/or modify
++    it under the terms of the GNU General Public License as published by
++    the Free Software Foundation; either version 2 of the License, or
++    (at your option) any later version.
++*/
++
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/pci.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++
++#include <asm/io.h>
++
++#include <asm/arch/at91_twi.h>
++#include <asm/arch/board.h>
++#include <asm/arch/cpu.h>
++
++#define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
++
++
++static struct clk *twi_clk;
++static void __iomem *twi_base;
++
++#define at91_twi_read(reg)		__raw_readl(twi_base + (reg))
++#define at91_twi_write(reg, val)	__raw_writel((val), twi_base + (reg))
++
++
++/*
++ * Initialize the TWI hardware registers.
++ */
++static void __devinit at91_twi_hwinit(void)
++{
++	unsigned long cdiv, ckdiv;
++
++	at91_twi_write(AT91_TWI_IDR, 0xffffffff);	/* Disable all interrupts */
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);	/* Reset peripheral */
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);	/* Set Master mode */
++
++	/* Calcuate clock dividers */
++	cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
++	cdiv = cdiv + 1;	/* round up */
++	ckdiv = 0;
++	while (cdiv > 255) {
++		ckdiv++;
++		cdiv = cdiv >> 1;
++	}
++
++	if (cpu_is_at91rm9200()) {			/* AT91RM9200 Errata #22 */
++		if (ckdiv > 5) {
++			printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
++			ckdiv = 5;
++		}
++	}
++
++	at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
++}
++
++/*
++ * Poll the i2c status register until the specified bit is set.
++ * Returns 0 if timed out (100 msec).
++ */
++static short at91_poll_status(unsigned long bit)
++{
++	int loop_cntr = 10000;
++
++	do {
++		udelay(10);
++	} while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0));
++
++	return (loop_cntr > 0);
++}
++
++static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
++{
++	/* Send Start */
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
++
++	/* Read data */
++	while (length--) {
++		if (!length)	/* need to send Stop before reading last byte */
++			at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
++		if (!at91_poll_status(AT91_TWI_RXRDY)) {
++			dev_dbg(&adap->dev, "RXRDY timeout\n");
++			return -ETIMEDOUT;
++		}
++		*buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff);
++	}
++
++	return 0;
++}
++
++static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
++{
++	/* Load first byte into transmitter */
++	at91_twi_write(AT91_TWI_THR, *buf++);
++
++	/* Send Start */
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
++
++	do {
++		if (!at91_poll_status(AT91_TWI_TXRDY)) {
++			dev_dbg(&adap->dev, "TXRDY timeout\n");
++			return -ETIMEDOUT;
++		}
++
++		length--;	/* byte was transmitted */
++
++		if (length > 0)		/* more data to send? */
++			at91_twi_write(AT91_TWI_THR, *buf++);
++	} while (length);
++
++	/* Send Stop */
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
++
++	return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ *
++ * Note: We do not use Atmel's feature of storing the "internal device address".
++ * Instead the "internal device address" has to be written using a seperate
++ * i2c message.
++ * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html
++ */
++static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
++{
++	int i, ret;
++
++	dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
++
++	for (i = 0; i < num; i++) {
++		dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
++			pmsg->flags & I2C_M_RD ? "read" : "writ",
++			pmsg->len, pmsg->len > 1 ? "s" : "",
++			pmsg->flags & I2C_M_RD ? "from" : "to",	pmsg->addr);
++
++		at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16)
++			| ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0));
++
++		if (pmsg->len && pmsg->buf) {	/* sanity check */
++			if (pmsg->flags & I2C_M_RD)
++				ret = xfer_read(adap, pmsg->buf, pmsg->len);
++			else
++				ret = xfer_write(adap, pmsg->buf, pmsg->len);
++
++			if (ret)
++				return ret;
++
++			/* Wait until transfer is finished */
++			if (!at91_poll_status(AT91_TWI_TXCOMP)) {
++				dev_dbg(&adap->dev, "TXCOMP timeout\n");
++				return -ETIMEDOUT;
++			}
++		}
++		dev_dbg(&adap->dev, "transfer complete\n");
++		pmsg++;		/* next message */
++	}
++	return i;
++}
++
++/*
++ * Return list of supported functionality.
++ */
++static u32 at91_func(struct i2c_adapter *adapter)
++{
++	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm at91_algorithm = {
++	.master_xfer	= at91_xfer,
++	.functionality	= at91_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __devinit at91_i2c_probe(struct platform_device *pdev)
++{
++	struct i2c_adapter *adapter;
++	struct resource *res;
++	int rc;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENXIO;
++	
++	if (!request_mem_region(res->start, res->end - res->start + 1, "at91_i2c"))
++		return -EBUSY;
++		
++	twi_base = ioremap(res->start, res->end - res->start + 1);
++	if (!twi_base) {
++		rc = -ENOMEM;
++		goto fail0;
++	}
++
++	twi_clk = clk_get(NULL, "twi_clk");
++	if (IS_ERR(twi_clk)) {
++		dev_err(&pdev->dev, "no clock defined\n");
++		rc = -ENODEV;
++		goto fail1; 
++	}
++
++	adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
++	if (adapter == NULL) {
++		dev_err(&pdev->dev, "can't allocate inteface!\n");
++		rc = -ENOMEM;
++		goto fail2;
++	}
++	sprintf(adapter->name, "AT91");
++	adapter->algo = &at91_algorithm;
++	adapter->class = I2C_CLASS_HWMON;
++	adapter->dev.parent = &pdev->dev;
++
++	platform_set_drvdata(pdev, adapter);
++
++	clk_enable(twi_clk);		/* enable peripheral clock */
++	at91_twi_hwinit();		/* initialize TWI controller */
++
++	rc = i2c_add_adapter(adapter);
++	if (rc) {
++		dev_err(&pdev->dev, "Adapter %s registration failed\n",
++				adapter->name);
++		goto fail3;
++	}
++
++	dev_info(&pdev->dev, "AT91 i2c bus driver.\n");
++	return 0;
++
++fail3:
++	platform_set_drvdata(pdev, NULL);
++	kfree(adapter);
++	clk_disable(twi_clk);
++fail2:
++	clk_put(twi_clk);
++fail1:
++	iounmap(twi_base);
++fail0:
++	release_mem_region(res->start, res->end - res->start + 1);
++	
++	return rc;
++}
++
++static int __devexit at91_i2c_remove(struct platform_device *pdev)
++{
++	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
++	struct resource *res;
++	int rc;
++
++	rc = i2c_del_adapter(adapter);
++	platform_set_drvdata(pdev, NULL);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	iounmap(twi_base);
++	release_mem_region(res->start, res->end - res->start + 1);
++
++	clk_disable(twi_clk);		/* disable peripheral clock */
++	clk_put(twi_clk);
++
++	return rc;
++}
++
++#ifdef CONFIG_PM
++
++/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */
++
++static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
++{
++	clk_disable(twi_clk);
++	return 0;
++}
++
++static int at91_i2c_resume(struct platform_device *pdev)
++{
++	return clk_enable(twi_clk);
++}
++
++#else
++#define at91_i2c_suspend	NULL
++#define at91_i2c_resume		NULL
++#endif
++
++static struct platform_driver at91_i2c_driver = {
++	.probe		= at91_i2c_probe,
++	.remove		= __devexit_p(at91_i2c_remove),
++	.suspend	= at91_i2c_suspend,
++	.resume		= at91_i2c_resume,
++	.driver		= {
++		.name	= "at91_i2c",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91_i2c_init(void)
++{
++	return platform_driver_register(&at91_i2c_driver);
++}
++
++static void __exit at91_i2c_exit(void)
++{
++	platform_driver_unregister(&at91_i2c_driver);
++}
++
++module_init(at91_i2c_init);
++module_exit(at91_i2c_exit);
++
++MODULE_AUTHOR("Rick Bronson");
++MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.19-final/drivers/i2c/busses/i2c-pca.c linux-2.6.19/drivers/i2c/busses/i2c-pca.c
+--- linux-2.6.19-final/drivers/i2c/busses/i2c-pca.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/i2c/busses/i2c-pca.c	Mon Oct 16 16:10:42 2006
+@@ -0,0 +1,202 @@
++/*
++ *  Platform driver for PCA9564 I2C bus controller.
++ *
++ *  (C) 2006 Andrew Victor
++ *
++ *  Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
++ *    Copyright (C) 2004 Arcom Control Systems
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <linux/platform_device.h>
++
++#include <linux/i2c.h>
++#include <linux/i2c-algo-pca.h>
++
++#include <asm/io.h>
++
++#include "../algos/i2c-algo-pca.h"
++
++#define PCA_OWN_ADDRESS		0x55	/* our address for slave mode */
++#define PCA_CLOCK		I2C_PCA_CON_59kHz
++
++//#define DEBUG_IO
++
++#define PCA_IO_SIZE 4
++
++static void __iomem *base_addr;
++static int irq;
++static wait_queue_head_t pca_wait;
++
++static int pca_getown(struct i2c_algo_pca_data *adap)
++{
++	return PCA_OWN_ADDRESS;
++}
++
++static int pca_getclock(struct i2c_algo_pca_data *adap)
++{
++	return PCA_CLOCK;
++}
++
++static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
++{
++#ifdef DEBUG_IO
++	static char *names[] = { "T/O", "DAT", "ADR", "CON" };
++	printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
++#endif
++	outb(val, base_addr+reg);
++}
++
++static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
++{
++	int res = inb(base_addr+reg);
++#ifdef DEBUG_IO
++	{
++		static char *names[] = { "STA", "DAT", "ADR", "CON" };
++		printk("*** read  %s => %#04x\n", names[reg], res);
++	}
++#endif
++	return res;
++}
++
++static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
++{
++	int ret = 0;
++
++	if (irq > -1) {
++		ret = wait_event_interruptible(pca_wait,
++				pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
++	} else {
++		while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
++			udelay(100);
++	}
++	return ret;
++}
++
++static irqreturn_t pca_handler(int this_irq, void *dev_id)
++{
++	wake_up_interruptible(&pca_wait);
++	return IRQ_HANDLED;
++}
++
++static struct i2c_algo_pca_data pca_i2c_data = {
++	.get_own		= pca_getown,
++	.get_clock		= pca_getclock,
++	.write_byte		= pca_writebyte,
++	.read_byte		= pca_readbyte,
++	.wait_for_interrupt	= pca_waitforinterrupt,
++};
++
++static struct i2c_adapter pca_i2c_ops = {
++	.owner          = THIS_MODULE,
++	.id		= I2C_HW_A_PLAT,
++	.algo_data	= &pca_i2c_data,
++	.name		= "PCA9564",
++};
++
++static int __devinit pca_i2c_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++
++	init_waitqueue_head(&pca_wait);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENODEV;
++
++	if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
++		return -ENXIO;
++
++	base_addr = ioremap(res->start, PCA_IO_SIZE);
++	if (base_addr == NULL)
++		goto out_region;
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq > -1) {
++		if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
++			printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
++			goto out_remap;
++		}
++	}
++
++	if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
++		printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
++		goto out_irq;
++	}
++
++	return 0;
++
++ out_irq:
++	if (irq > -1)
++		free_irq(irq, &pca_i2c_ops);
++
++ out_remap:
++	iounmap(base_addr);
++
++ out_region:
++	release_mem_region(res->start, PCA_IO_SIZE);
++	return -ENODEV;
++}
++
++static int __devexit pca_i2c_remove(struct platform_device *pdev)
++{
++	struct resource *res;
++
++	i2c_pca_del_bus(&pca_i2c_ops);
++
++	if (irq > 0)
++		free_irq(irq, NULL);
++
++	iounmap(base_addr);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	release_mem_region(res->start, PCA_IO_SIZE);
++
++	return 0;
++}
++
++static struct platform_driver pca_i2c_driver = {
++	.probe		= pca_i2c_probe,
++	.remove		= __devexit_p(pca_i2c_remove),
++	.driver		= {
++		.name	= "pca9564",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init pca_i2c_init(void)
++{
++	return platform_driver_register(&pca_i2c_driver);
++}
++
++static void __exit pca_i2c_exit(void)
++{
++	platform_driver_unregister(&pca_i2c_driver);
++}
++
++module_init(pca_i2c_init);
++module_exit(pca_i2c_exit);
++
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("PCA9564 platform driver");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.19-final/drivers/leds/Kconfig linux-2.6.19/drivers/leds/Kconfig
+--- linux-2.6.19-final/drivers/leds/Kconfig	Mon Dec  4 16:33:34 2006
++++ linux-2.6.19/drivers/leds/Kconfig	Thu Nov 16 17:15:16 2006
+@@ -76,6 +76,13 @@
+ 	  This option enables support for the Soekris net4801 and net4826 error
+ 	  LED.
+ 
++config LEDS_AT91
++	tristate "LED support using AT91 GPIOs"
++	depends LEDS_CLASS && ARCH_AT91 && !LEDS
++	help
++	  This option enables support for LEDs connected to GPIO lines
++	  on AT91-based boards.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+diff -urN -x CVS linux-2.6.19-final/drivers/leds/Makefile linux-2.6.19/drivers/leds/Makefile
+--- linux-2.6.19-final/drivers/leds/Makefile	Mon Dec  4 16:33:34 2006
++++ linux-2.6.19/drivers/leds/Makefile	Thu Nov 16 12:52:06 2006
+@@ -13,6 +13,7 @@
+ obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
+ obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
+ obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
++obj-$(CONFIG_LEDS_AT91)			+= leds-at91.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+diff -urN -x CVS linux-2.6.19-final/drivers/leds/leds-at91.c linux-2.6.19/drivers/leds/leds-at91.c
+--- linux-2.6.19-final/drivers/leds/leds-at91.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/leds/leds-at91.c	Mon Nov 20 11:02:21 2006
+@@ -0,0 +1,140 @@
++/*
++ * AT91 GPIO based LED driver
++ *
++ * Copyright (C) 2006 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++static LIST_HEAD(at91_led_list);	/* list of AT91 LEDs */
++
++struct at91_led {
++	struct led_classdev	cdev;
++	struct list_head	list;
++	struct at91_gpio_led	*led_data;
++};
++
++/*
++ * Change the state of the LED.
++ */
++static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
++{
++	struct at91_led	*led = container_of(cdev, struct at91_led, cdev);
++	short		active = (value == LED_OFF);
++
++	if (led->led_data->flags & 1)	/* active high/low? */
++		active = !active;
++	at91_set_gpio_value(led->led_data->gpio, value == LED_OFF);
++}
++
++static int __devexit at91_led_remove(struct platform_device *pdev)
++{
++	struct at91_led		*led;
++
++	list_for_each_entry (led, &at91_led_list, list)
++		led_classdev_unregister(&led->cdev);
++
++#warning "Free allocated memory"
++	// TODO: Free memory.	kfree(led);
++
++	return 0;
++}
++
++static int __init at91_led_probe(struct platform_device *pdev)
++{
++	int			status = 0;
++	struct at91_gpio_led	*pdata = pdev->dev.platform_data;
++	unsigned		nr_leds;
++	struct at91_led		*led;
++
++	if (!pdata)
++		return -ENODEV;
++
++	nr_leds = pdata->index;		/* first index stores number of LEDs */
++
++	while (nr_leds--) {
++		led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
++		if (!led) {
++			dev_err(&pdev->dev, "No memory for device\n");
++			status = -ENOMEM;
++			goto cleanup;
++		}
++		led->led_data = pdata;
++		led->cdev.name = pdata->name;
++		led->cdev.brightness_set = at91_led_set,
++		led->cdev.default_trigger = pdata->trigger;
++
++		status = led_classdev_register(&pdev->dev, &led->cdev);
++		if (status < 0) {
++			dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
++cleanup:
++			at91_led_remove(pdev);
++			break;
++		}
++		list_add(&led->list, &at91_led_list);
++		pdata++;
++	}
++	return status;
++}
++
++#ifdef CONFIG_PM
++static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
++{
++	struct at91_led	*led;
++
++	list_for_each_entry (led, &at91_led_list, list)
++		led_classdev_suspend(&led->cdev);
++
++	return 0;
++}
++
++static int at91_led_resume(struct platform_device *dev)
++{
++	struct at91_led	*led;
++
++	list_for_each_entry (led, &at91_led_list, list)
++		led_classdev_resume(&led->cdev);
++
++	return 0;
++}
++#else
++#define	at91_led_suspend	NULL
++#define	at91_led_resume		NULL
++#endif
++
++static struct platform_driver at91_led_driver = {
++	.probe		= at91_led_probe,
++	.remove		= __devexit_p(at91_led_remove),
++	.suspend	= at91_led_suspend,
++	.resume		= at91_led_resume,
++	.driver		= {
++		.name	= "at91_leds",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91_led_init(void)
++{
++	return platform_driver_register(&at91_led_driver);
++}
++module_init(at91_led_init);
++
++static void __exit at91_led_exit(void)
++{
++	platform_driver_unregister(&at91_led_driver);
++}
++module_exit(at91_led_exit);
++
++MODULE_DESCRIPTION("AT91 GPIO LED driver");
++MODULE_AUTHOR("David Brownell");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.19-final/drivers/mmc/Kconfig linux-2.6.19/drivers/mmc/Kconfig
+--- linux-2.6.19-final/drivers/mmc/Kconfig	Mon Dec  4 16:40:13 2006
++++ linux-2.6.19/drivers/mmc/Kconfig	Thu Nov  9 14:16:55 2006
+@@ -91,11 +91,11 @@
+ 
+ 	  If unsure, say N.
+ 
+-config MMC_AT91RM9200
+-	tristate "AT91RM9200 SD/MMC Card Interface support"
+-	depends on ARCH_AT91RM9200 && MMC
++config MMC_AT91
++	tristate "AT91 SD/MMC Card Interface support"
++	depends on ARCH_AT91 && MMC
+ 	help
+-	  This selects the AT91RM9200 MCI controller.
++	  This selects the AT91 MCI controller.
+ 
+ 	  If unsure, say N.
+ 
+diff -urN -x CVS linux-2.6.19-final/drivers/mmc/Makefile linux-2.6.19/drivers/mmc/Makefile
+--- linux-2.6.19-final/drivers/mmc/Makefile	Mon Dec  4 16:40:13 2006
++++ linux-2.6.19/drivers/mmc/Makefile	Thu Nov  9 14:17:47 2006
+@@ -22,7 +22,7 @@
+ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+-obj-$(CONFIG_MMC_AT91RM9200)	+= at91_mci.o
++obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
+ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+ 
+ mmc_core-y := mmc.o mmc_sysfs.o
+diff -urN -x CVS linux-2.6.19-final/drivers/mmc/at91_mci.c linux-2.6.19/drivers/mmc/at91_mci.c
+--- linux-2.6.19-final/drivers/mmc/at91_mci.c	Mon Dec  4 16:40:13 2006
++++ linux-2.6.19/drivers/mmc/at91_mci.c	Sat Nov 25 11:00:45 2006
+@@ -1,5 +1,5 @@
+ /*
+- *  linux/drivers/mmc/at91_mci.c - ATMEL AT91RM9200 MCI Driver
++ *  linux/drivers/mmc/at91_mci.c - ATMEL AT91 MCI Driver
+  *
+  *  Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
+  *
+@@ -11,7 +11,7 @@
+  */
+ 
+ /*
+-   This is the AT91RM9200 MCI driver that has been tested with both MMC cards
++   This is the AT91 MCI driver that has been tested with both MMC cards
+    and SD-cards.  Boards that support write protect are now supported.
+    The CCAT91SBC001 board does not support SD cards.
+ 
+@@ -38,8 +38,8 @@
+      controller to manage the transfers.
+ 
+      A read is done from the controller directly to the scatterlist passed in from the request.
+-     Due to a bug in the controller, when a read is completed, all the words are byte
+-     swapped in the scatterlist buffers.
++     Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte
++     swapped in the scatterlist buffers.  AT91SAM926x are not affected by this bug.
+ 
+      The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
+ 
+@@ -72,42 +72,27 @@
+ #include <asm/irq.h>
+ #include <asm/mach/mmc.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/cpu.h>
+ #include <asm/arch/gpio.h>
+-#include <asm/arch/at91rm9200_mci.h>
+-#include <asm/arch/at91rm9200_pdc.h>
++#include <asm/arch/at91_mci.h>
++#include <asm/arch/at91_pdc.h>
+ 
+ #define DRIVER_NAME "at91_mci"
+ 
+ #undef	SUPPORT_4WIRE
+ 
+-static struct clk *mci_clk;
++#define FL_SENT_COMMAND	(1 << 0)
++#define FL_SENT_STOP	(1 << 1)
+ 
+-#define FL_SENT_COMMAND (1 << 0)
+-#define FL_SENT_STOP (1 << 1)
++#define AT91_MCI_ERRORS	(AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE	\
++			| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE	\
++			| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
+ 
++#define at91_mci_read(host, reg)	__raw_readl((host)->baseaddr + (reg))
++#define at91_mci_write(host, reg, val)	__raw_writel((val), (host)->baseaddr + (reg))
+ 
+ 
+ /*
+- * Read from a MCI register.
+- */
+-static inline unsigned long at91_mci_read(unsigned int reg)
+-{
+-	void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
+-
+-	return __raw_readl(mci_base + reg);
+-}
+-
+-/*
+- * Write to a MCI register.
+- */
+-static inline void at91_mci_write(unsigned int reg, unsigned long value)
+-{
+-        void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
+-
+-        __raw_writel(value, mci_base + reg);
+-}
+-
+-/*
+  * Low level type for this driver
+  */
+ struct at91mci_host
+@@ -116,9 +101,14 @@
+ 	struct mmc_command *cmd;
+ 	struct mmc_request *request;
+ 
++	void __iomem *baseaddr;
++	int irq;
++
+ 	struct at91_mmc_data *board;
+ 	int present;
+ 
++	struct clk *mci_clk;
++
+ 	/*
+ 	 * Flag indicating when the command has been sent. This is used to
+ 	 * work out whether or not to send the stop
+@@ -158,7 +148,6 @@
+ 	for (i = 0; i < len; i++) {
+ 		struct scatterlist *sg;
+ 		int amount;
+-		int index;
+ 		unsigned int *sgbuffer;
+ 
+ 		sg = &data->sg[i];
+@@ -166,10 +155,15 @@
+ 		sgbuffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
+ 		amount = min(size, sg->length);
+ 		size -= amount;
+-		amount /= 4;
+-
+-		for (index = 0; index < amount; index++)
+-			*dmabuf++ = swab32(sgbuffer[index]);
++		
++		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
++			int index;
++		
++			for (index = 0; index < (amount / 4); index++)
++				*dmabuf++ = swab32(sgbuffer[index]);
++		}
++		else
++			memcpy(dmabuf, sgbuffer, amount);
+ 
+ 		kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
+ 
+@@ -217,13 +211,13 @@
+ 
+ 		/* Check to see if this needs filling */
+ 		if (i == 0) {
+-			if (at91_mci_read(AT91_PDC_RCR) != 0) {
++			if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
+ 				pr_debug("Transfer active in current\n");
+ 				continue;
+ 			}
+ 		}
+ 		else {
+-			if (at91_mci_read(AT91_PDC_RNCR) != 0) {
++			if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
+ 				pr_debug("Transfer active in next\n");
+ 				continue;
+ 			}
+@@ -240,12 +234,12 @@
+ 		pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
+ 
+ 		if (i == 0) {
+-			at91_mci_write(AT91_PDC_RPR, sg->dma_address);
+-			at91_mci_write(AT91_PDC_RCR, sg->length / 4);
++			at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
++			at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
+ 		}
+ 		else {
+-			at91_mci_write(AT91_PDC_RNPR, sg->dma_address);
+-			at91_mci_write(AT91_PDC_RNCR, sg->length / 4);
++			at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
++			at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
+ 		}
+ 	}
+ 
+@@ -276,8 +270,6 @@
+ 
+ 	while (host->in_use_index < host->transfer_index) {
+ 		unsigned int *buffer;
+-		int index;
+-		int len;
+ 
+ 		struct scatterlist *sg;
+ 
+@@ -295,11 +287,14 @@
+ 
+ 		data->bytes_xfered += sg->length;
+ 
+-		len = sg->length / 4;
+-
+-		for (index = 0; index < len; index++) {
+-			buffer[index] = swab32(buffer[index]);
++		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
++			int index;
++		
++			for (index = 0; index < (sg->length / 4); index++) {
++				buffer[index] = swab32(buffer[index]);
++			}
+ 		}
++
+ 		kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
+ 		flush_dcache_page(sg->page);
+ 	}
+@@ -308,57 +303,34 @@
+ 	if (host->transfer_index < data->sg_len)
+ 		at91mci_pre_dma_read(host);
+ 	else {
+-		at91_mci_write(AT91_MCI_IER, AT91_MCI_RXBUFF);
+-		at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
++		at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ 	}
+ 
+ 	pr_debug("post dma read done\n");
+ }
+ 
+-/*
+- * Handle transmitted data
+- */
+-static void at91_mci_handle_transmitted(struct at91mci_host *host)
+-{
+-	struct mmc_command *cmd;
+-	struct mmc_data *data;
+-
+-	pr_debug("Handling the transmit\n");
+-
+-	/* Disable the transfer */
+-	at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+-
+-	/* Now wait for cmd ready */
+-	at91_mci_write(AT91_MCI_IDR, AT91_MCI_TXBUFE);
+-	at91_mci_write(AT91_MCI_IER, AT91_MCI_NOTBUSY);
+-
+-	cmd = host->cmd;
+-	if (!cmd) return;
+-
+-	data = cmd->data;
+-	if (!data) return;
+-
+-	data->bytes_xfered = host->total_length;
+-}
+ 
+ /*
+  * Enable the controller
+  */
+-static void at91_mci_enable(void)
++static void at91_mci_enable(struct at91mci_host *host)
+ {
+-	at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
+-	at91_mci_write(AT91_MCI_IDR, 0xFFFFFFFF);
+-	at91_mci_write(AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
+-	at91_mci_write(AT91_MCI_MR, 0x834A);
+-	at91_mci_write(AT91_MCI_SDCR, 0x0);
++	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
++	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
++	at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
++	at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
++	
++	/* use Slot A or B (only one at same time) */
++	at91_mci_write(host, AT91_MCI_SDCR,  host->board->slot_b);
+ }
+ 
+ /*
+  * Disable the controller
+  */
+-static void at91_mci_disable(void)
++static void at91_mci_disable(struct at91mci_host *host)
+ {
+-	at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
++	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
+ }
+ 
+ /*
+@@ -378,13 +350,13 @@
+ 
+ 	/* Not sure if this is needed */
+ #if 0
+-	if ((at91_mci_read(AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
++	if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
+ 		pr_debug("Clearing timeout\n");
+-		at91_mci_write(AT91_MCI_ARGR, 0);
+-		at91_mci_write(AT91_MCI_CMDR, AT91_MCI_OPDCMD);
+-		while (!(at91_mci_read(AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
++		at91_mci_write(host, AT91_MCI_ARGR, 0);
++		at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD);
++		while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
+ 			/* spin */
+-			pr_debug("Clearing: SR = %08X\n", at91_mci_read(AT91_MCI_SR));
++			pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
+ 		}
+ 	}
+ #endif
+@@ -431,32 +403,32 @@
+ 	/*
+ 	 * Set the arguments and send the command
+ 	 */
+-	pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n",
+-		cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(AT91_MCI_MR));
++	pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
++		cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
+ 
+ 	if (!data) {
+-		at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
+-		at91_mci_write(AT91_PDC_RPR, 0);
+-		at91_mci_write(AT91_PDC_RCR, 0);
+-		at91_mci_write(AT91_PDC_RNPR, 0);
+-		at91_mci_write(AT91_PDC_RNCR, 0);
+-		at91_mci_write(AT91_PDC_TPR, 0);
+-		at91_mci_write(AT91_PDC_TCR, 0);
+-		at91_mci_write(AT91_PDC_TNPR, 0);
+-		at91_mci_write(AT91_PDC_TNCR, 0);
++		at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
++		at91_mci_write(host, AT91_PDC_RPR, 0);
++		at91_mci_write(host, AT91_PDC_RCR, 0);
++		at91_mci_write(host, AT91_PDC_RNPR, 0);
++		at91_mci_write(host, AT91_PDC_RNCR, 0);
++		at91_mci_write(host, AT91_PDC_TPR, 0);
++		at91_mci_write(host, AT91_PDC_TCR, 0);
++		at91_mci_write(host, AT91_PDC_TNPR, 0);
++		at91_mci_write(host, AT91_PDC_TNCR, 0);
+ 
+-		at91_mci_write(AT91_MCI_ARGR, cmd->arg);
+-		at91_mci_write(AT91_MCI_CMDR, cmdr);
++		at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
++		at91_mci_write(host, AT91_MCI_CMDR, cmdr);
+ 		return AT91_MCI_CMDRDY;
+ 	}
+ 
+-	mr = at91_mci_read(AT91_MCI_MR) & 0x7fff;	/* zero block length and PDC mode */
+-	at91_mci_write(AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
++	mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;	/* zero block length and PDC mode */
++	at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
+ 
+ 	/*
+ 	 * Disable the PDC controller
+ 	 */
+-	at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++	at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ 
+ 	if (cmdr & AT91_MCI_TRCMD_START) {
+ 		data->bytes_xfered = 0;
+@@ -478,15 +450,15 @@
+ 			 */
+ 			host->total_length = block_length * blocks;
+ 			host->buffer = dma_alloc_coherent(NULL,
+-						  host->total_length,
+-						  &host->physical_address, GFP_KERNEL);
++						host->total_length,
++						&host->physical_address, GFP_KERNEL);
+ 
+ 			at91mci_sg_to_dma(host, data);
+ 
+ 			pr_debug("Transmitting %d bytes\n", host->total_length);
+ 
+-			at91_mci_write(AT91_PDC_TPR, host->physical_address);
+-			at91_mci_write(AT91_PDC_TCR, host->total_length / 4);
++			at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
++			at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
+ 			ier = AT91_MCI_TXBUFE;
+ 		}
+ 	}
+@@ -496,14 +468,14 @@
+ 	 * the data sheet says
+ 	 */
+ 
+-	at91_mci_write(AT91_MCI_ARGR, cmd->arg);
+-	at91_mci_write(AT91_MCI_CMDR, cmdr);
++	at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
++	at91_mci_write(host, AT91_MCI_CMDR, cmdr);
+ 
+ 	if (cmdr & AT91_MCI_TRCMD_START) {
+ 		if (cmdr & AT91_MCI_TRDIR)
+-			at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTEN);
++			at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
+ 		else
+-			at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTEN);
++			at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
+ 	}
+ 	return ier;
+ }
+@@ -520,7 +492,7 @@
+ 	pr_debug("setting ier to %08X\n", ier);
+ 
+ 	/* Stop on errors or the required value */
+-	at91_mci_write(AT91_MCI_IER, 0xffff0000 | ier);
++	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
+ }
+ 
+ /*
+@@ -548,26 +520,24 @@
+ 	struct mmc_command *cmd = host->cmd;
+ 	unsigned int status;
+ 
+-	at91_mci_write(AT91_MCI_IDR, 0xffffffff);
++	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+ 
+-	cmd->resp[0] = at91_mci_read(AT91_MCI_RSPR(0));
+-	cmd->resp[1] = at91_mci_read(AT91_MCI_RSPR(1));
+-	cmd->resp[2] = at91_mci_read(AT91_MCI_RSPR(2));
+-	cmd->resp[3] = at91_mci_read(AT91_MCI_RSPR(3));
++	cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
++	cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
++	cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2));
++	cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
+ 
+ 	if (host->buffer) {
+ 		dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
+ 		host->buffer = NULL;
+ 	}
+ 
+-	status = at91_mci_read(AT91_MCI_SR);
++	status = at91_mci_read(host, AT91_MCI_SR);
+ 
+ 	pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
+ 		 status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+ 
+-	if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
+-			AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
+-			AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
++	if (status & AT91_MCI_ERRORS) {
+ 		if ((status & AT91_MCI_RCRCE) &&
+ 			((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
+ 			cmd->error = MMC_ERR_NONE;
+@@ -605,24 +575,50 @@
+ }
+ 
+ /*
++ * Handle transmitted data
++ */
++static void at91_mci_handle_transmitted(struct at91mci_host *host)
++{
++	struct mmc_command *cmd;
++	struct mmc_data *data;
++
++	pr_debug("Handling the transmit\n");
++
++	/* Disable the transfer */
++	at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++
++	/* Now wait for cmd ready */
++	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
++	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
++
++	cmd = host->cmd;
++	if (!cmd) return;
++
++	data = cmd->data;
++	if (!data) return;
++
++	data->bytes_xfered = host->total_length;
++}
++
++/*
+  * Set the IOS
+  */
+ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ {
+ 	int clkdiv;
+ 	struct at91mci_host *host = mmc_priv(mmc);
+-	unsigned long at91_master_clock = clk_get_rate(mci_clk);
++	unsigned long at91_master_clock = clk_get_rate(host->mci_clk);
+ 
+ 	host->bus_mode = ios->bus_mode;
+ 
+ 	if (ios->clock == 0) {
+ 		/* Disable the MCI controller */
+-		at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS);
++		at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS);
+ 		clkdiv = 0;
+ 	}
+ 	else {
+ 		/* Enable the MCI controller */
+-		at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
++		at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
+ 
+ 		if ((at91_master_clock % (ios->clock * 2)) == 0)
+ 			clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
+@@ -634,25 +630,25 @@
+ 	}
+ 	if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
+ 		pr_debug("MMC: Setting controller bus width to 4\n");
+-		at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
++		at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
+ 	}
+ 	else {
+ 		pr_debug("MMC: Setting controller bus width to 1\n");
+-		at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
++		at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
+ 	}
+ 
+ 	/* Set the clock divider */
+-	at91_mci_write(AT91_MCI_MR, (at91_mci_read(AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
++	at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
+ 
+ 	/* maybe switch power to the card */
+ 	if (host->board->vcc_pin) {
+ 		switch (ios->power_mode) {
+ 			case MMC_POWER_OFF:
+-				at91_set_gpio_output(host->board->vcc_pin, 0);
++				at91_set_gpio_value(host->board->vcc_pin, 0);
+ 				break;
+ 			case MMC_POWER_UP:
+ 			case MMC_POWER_ON:
+-				at91_set_gpio_output(host->board->vcc_pin, 1);
++				at91_set_gpio_value(host->board->vcc_pin, 1);
+ 				break;
+ 		}
+ 	}
+@@ -665,39 +661,40 @@
+ {
+ 	struct at91mci_host *host = devid;
+ 	int completed = 0;
++	unsigned int int_status, int_mask;
+ 
+-	unsigned int int_status;
++	int_status = at91_mci_read(host, AT91_MCI_SR);
++	int_mask = at91_mci_read(host, AT91_MCI_IMR); 
+ 
+-	int_status = at91_mci_read(AT91_MCI_SR);
+-	pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, at91_mci_read(AT91_MCI_IMR),
+-		int_status & at91_mci_read(AT91_MCI_IMR));
+-
+-	if ((int_status & at91_mci_read(AT91_MCI_IMR)) & 0xffff0000)
+-		completed = 1;
++	pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
++		int_status & int_mask);
+ 
+-	int_status &= at91_mci_read(AT91_MCI_IMR);
++	int_status = int_status & int_mask;
+ 
+-	if (int_status & AT91_MCI_UNRE)
+-		pr_debug("MMC: Underrun error\n");
+-	if (int_status & AT91_MCI_OVRE)
+-		pr_debug("MMC: Overrun error\n");
+-	if (int_status & AT91_MCI_DTOE)
+-		pr_debug("MMC: Data timeout\n");
+-	if (int_status & AT91_MCI_DCRCE)
+-		pr_debug("MMC: CRC error in data\n");
+-	if (int_status & AT91_MCI_RTOE)
+-		pr_debug("MMC: Response timeout\n");
+-	if (int_status & AT91_MCI_RENDE)
+-		pr_debug("MMC: Response end bit error\n");
+-	if (int_status & AT91_MCI_RCRCE)
+-		pr_debug("MMC: Response CRC error\n");
+-	if (int_status & AT91_MCI_RDIRE)
+-		pr_debug("MMC: Response direction error\n");
+-	if (int_status & AT91_MCI_RINDE)
+-		pr_debug("MMC: Response index error\n");
++	if (int_status & AT91_MCI_ERRORS) {
++		completed = 1;
++		
++		if (int_status & AT91_MCI_UNRE)
++			pr_debug("MMC: Underrun error\n");
++		if (int_status & AT91_MCI_OVRE)
++			pr_debug("MMC: Overrun error\n");
++		if (int_status & AT91_MCI_DTOE)
++			pr_debug("MMC: Data timeout\n");
++		if (int_status & AT91_MCI_DCRCE)
++			pr_debug("MMC: CRC error in data\n");
++		if (int_status & AT91_MCI_RTOE)
++			pr_debug("MMC: Response timeout\n");
++		if (int_status & AT91_MCI_RENDE)
++			pr_debug("MMC: Response end bit error\n");
++		if (int_status & AT91_MCI_RCRCE)
++			pr_debug("MMC: Response CRC error\n");
++		if (int_status & AT91_MCI_RDIRE)
++			pr_debug("MMC: Response direction error\n");
++		if (int_status & AT91_MCI_RINDE)
++			pr_debug("MMC: Response index error\n");
++	} else {
++		/* Only continue processing if no errors */
+ 
+-	/* Only continue processing if no errors */
+-	if (!completed) {
+ 		if (int_status & AT91_MCI_TXBUFE) {
+ 			pr_debug("TX buffer empty\n");
+ 			at91_mci_handle_transmitted(host);
+@@ -705,12 +702,11 @@
+ 
+ 		if (int_status & AT91_MCI_RXBUFF) {
+ 			pr_debug("RX buffer full\n");
+-			at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
++			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
+ 		}
+ 
+-		if (int_status & AT91_MCI_ENDTX) {
++		if (int_status & AT91_MCI_ENDTX)
+ 			pr_debug("Transmit has ended\n");
+-		}
+ 
+ 		if (int_status & AT91_MCI_ENDRX) {
+ 			pr_debug("Receive has ended\n");
+@@ -719,37 +715,33 @@
+ 
+ 		if (int_status & AT91_MCI_NOTBUSY) {
+ 			pr_debug("Card is ready\n");
+-			at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
++			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
+ 		}
+ 
+-		if (int_status & AT91_MCI_DTIP) {
++		if (int_status & AT91_MCI_DTIP)
+ 			pr_debug("Data transfer in progress\n");
+-		}
+ 
+-		if (int_status & AT91_MCI_BLKE) {
++		if (int_status & AT91_MCI_BLKE)
+ 			pr_debug("Block transfer has ended\n");
+-		}
+ 
+-		if (int_status & AT91_MCI_TXRDY) {
++		if (int_status & AT91_MCI_TXRDY)
+ 			pr_debug("Ready to transmit\n");
+-		}
+ 
+-		if (int_status & AT91_MCI_RXRDY) {
++		if (int_status & AT91_MCI_RXRDY)
+ 			pr_debug("Ready to receive\n");
+-		}
+ 
+ 		if (int_status & AT91_MCI_CMDRDY) {
+ 			pr_debug("Command ready\n");
+ 			completed = 1;
+ 		}
+ 	}
+-	at91_mci_write(AT91_MCI_IDR, int_status);
+ 
+ 	if (completed) {
+ 		pr_debug("Completed command\n");
+-		at91_mci_write(AT91_MCI_IDR, 0xffffffff);
++		at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+ 		at91mci_completed_command(host);
+-	}
++	} else
++		at91_mci_write(host, AT91_MCI_IDR, int_status);
+ 
+ 	return IRQ_HANDLED;
+ }
+@@ -769,7 +761,7 @@
+ 			present ? "insert" : "remove");
+ 		if (!present) {
+ 			pr_debug("****** Resetting SD-card bus width ******\n");
+-			at91_mci_write(AT91_MCI_SDCR, 0);
++			at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
+ 		}
+ 		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+ 	}
+@@ -806,15 +798,22 @@
+ {
+ 	struct mmc_host *mmc;
+ 	struct at91mci_host *host;
++	struct resource *res;
+ 	int ret;
+ 
+ 	pr_debug("Probe MCI devices\n");
+-	at91_mci_disable();
+-	at91_mci_enable();
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENXIO;
++
++	if (!request_mem_region(res->start, res->end - res->start + 1, DRIVER_NAME))
++		return -EBUSY;
+ 
+ 	mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
+ 	if (!mmc) {
+ 		pr_debug("Failed to allocate mmc host\n");
++		release_mem_region(res->start, res->end - res->start + 1);
+ 		return -ENOMEM;
+ 	}
+ 
+@@ -822,7 +821,7 @@
+ 	mmc->f_min = 375000;
+ 	mmc->f_max = 25000000;
+ 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+-	mmc->caps = MMC_CAP_BYTEBLOCK;
++	mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
+ 
+ 	host = mmc_priv(mmc);
+ 	host->mmc = mmc;
+@@ -833,29 +832,50 @@
+ #ifdef SUPPORT_4WIRE
+ 		mmc->caps |= MMC_CAP_4_BIT_DATA;
+ #else
+-		printk("MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
++		printk("AT91 MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
+ #endif
+ 	}
+ 
+ 	/*
+ 	 * Get Clock
+ 	 */
+-	mci_clk = clk_get(&pdev->dev, "mci_clk");
+-	if (IS_ERR(mci_clk)) {
++	host->mci_clk = clk_get(&pdev->dev, "mci_clk");
++	if (IS_ERR(host->mci_clk)) {
+ 		printk(KERN_ERR "AT91 MMC: no clock defined.\n");
+ 		mmc_free_host(mmc);
++		release_mem_region(res->start, res->end - res->start + 1);
+ 		return -ENODEV;
+ 	}
+-	clk_enable(mci_clk);			/* Enable the peripheral clock */
++
++	/*
++	 * Map I/O region
++	 */
++	host->baseaddr = ioremap(res->start, res->end - res->start + 1);
++	if (!host->baseaddr) {
++		clk_put(host->mci_clk);
++		release_mem_region(res->start, res->end - res->start + 1);
++		mmc_free_host(mmc);
++		return -ENOMEM;
++	}
++
++	/*
++	 * Reset hardware
++	 */
++	clk_enable(host->mci_clk);	/* Enable the peripheral clock */
++	at91_mci_disable(host);
++	at91_mci_enable(host); 
+ 
+ 	/*
+ 	 * Allocate the MCI interrupt
+ 	 */
+-	ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
++	host->irq = platform_get_irq(pdev, 0);
++	ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
+ 	if (ret) {
+-		printk(KERN_ERR "Failed to request MCI interrupt\n");
+-		clk_disable(mci_clk);
+-		clk_put(mci_clk);
++		printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
++		clk_disable(host->mci_clk);
++		clk_put(host->mci_clk);
++		iounmap(host->baseaddr);
++		release_mem_region(res->start, res->end - res->start + 1);
+ 		mmc_free_host(mmc);
+ 		return ret;
+ 	}
+@@ -879,10 +899,10 @@
+ 		ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
+ 				0, DRIVER_NAME, host);
+ 		if (ret)
+-			printk(KERN_ERR "couldn't allocate MMC detect irq\n");
++			printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
+ 	}
+ 
+-	pr_debug(KERN_INFO "Added MCI driver\n");
++	pr_debug("Added MCI driver\n");
+ 
+ 	return 0;
+ }
+@@ -894,6 +914,7 @@
+ {
+ 	struct mmc_host *mmc = platform_get_drvdata(pdev);
+ 	struct at91mci_host *host;
++	struct resource *res;
+ 
+ 	if (!mmc)
+ 		return -1;
+@@ -905,16 +926,19 @@
+ 		cancel_delayed_work(&host->mmc->detect);
+ 	}
+ 
++	at91_mci_disable(host);
+ 	mmc_remove_host(mmc);
+-	at91_mci_disable();
+-	free_irq(AT91RM9200_ID_MCI, host);
+-	mmc_free_host(mmc);
++	free_irq(host->irq, host);
+ 
+-	clk_disable(mci_clk);				/* Disable the peripheral clock */
+-	clk_put(mci_clk);
++	iounmap(host->baseaddr);
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	release_mem_region(res->start, res->end - res->start + 1);
+ 
+-	platform_set_drvdata(pdev, NULL);
++	clk_disable(host->mci_clk);			/* Disable the peripheral clock */
++	clk_put(host->mci_clk);
+ 
++	mmc_free_host(mmc);
++	platform_set_drvdata(pdev, NULL);
+ 	pr_debug("MCI Removed\n");
+ 
+ 	return 0;
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/devices/Kconfig linux-2.6.19/drivers/mtd/devices/Kconfig
+--- linux-2.6.19-final/drivers/mtd/devices/Kconfig	Mon Dec  4 16:40:13 2006
++++ linux-2.6.19/drivers/mtd/devices/Kconfig	Wed Nov 22 09:22:03 2006
+@@ -267,5 +267,11 @@
+ 	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
+ 	  you have managed to wipe the first block.
+ 
+-endmenu
++config MTD_AT91_DATAFLASH
++	tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
++	depends on MTD && ARCH_AT91RM9200 && AT91_SPI
++	help
++	  This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
++	  If you have such a board, say 'Y'.
+ 
++endmenu
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/devices/Makefile linux-2.6.19/drivers/mtd/devices/Makefile
+--- linux-2.6.19-final/drivers/mtd/devices/Makefile	Mon Dec  4 16:33:42 2006
++++ linux-2.6.19/drivers/mtd/devices/Makefile	Thu Oct 12 17:07:39 2006
+@@ -17,3 +17,4 @@
+ obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
++obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/devices/at91_dataflash.c linux-2.6.19/drivers/mtd/devices/at91_dataflash.c
+--- linux-2.6.19-final/drivers/mtd/devices/at91_dataflash.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/mtd/devices/at91_dataflash.c	Mon Dec  4 16:12:44 2006
+@@ -0,0 +1,640 @@
++/*
++ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
++ *
++ *  Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++*/
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/pci.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/arch/spi.h>
++
++#undef DEBUG_DATAFLASH
++
++#define DATAFLASH_MAX_DEVICES	4	/* max number of dataflash devices */
++#undef	DATAFLASH_ALWAYS_ADD_DEVICE	/* always add whole device when using partitions? */
++
++#define OP_READ_CONTINUOUS	0xE8
++#define OP_READ_PAGE		0xD2
++#define OP_READ_BUFFER1		0xD4
++#define OP_READ_BUFFER2		0xD6
++#define OP_READ_STATUS		0xD7
++
++#define OP_ERASE_PAGE		0x81
++#define OP_ERASE_BLOCK		0x50
++
++#define OP_TRANSFER_BUF1	0x53
++#define OP_TRANSFER_BUF2	0x55
++#define OP_COMPARE_BUF1		0x60
++#define OP_COMPARE_BUF2		0x61
++
++#define OP_PROGRAM_VIA_BUF1	0x82
++#define OP_PROGRAM_VIA_BUF2	0x85
++
++struct dataflash_local
++{
++	int spi;			/* SPI chip-select number */
++
++	unsigned int page_size;		/* number of bytes per page */
++	unsigned short page_offset;	/* page offset in flash address */
++};
++
++
++/* Detected DataFlash devices */
++static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
++static int nr_devices = 0;
++
++/* ......................................................................... */
++
++#ifdef CONFIG_MTD_PARTITIONS
++
++static struct mtd_partition static_partitions_2M[] =
++{
++	{
++		.name		= "bootloader",
++		.offset		= 0,
++		.size		= 1 * 32 * 8 * 528,	/* 1st sector = 32 blocks * 8 pages * 528 bytes */
++		.mask_flags	= MTD_WRITEABLE,	/* read-only */
++	},
++	{
++		.name		= "kernel",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 6 * 32 * 8 * 528,	/* 6 sectors */
++	},
++	{
++		.name		= "filesystem",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= MTDPART_SIZ_FULL,	/* rest = 9 sectors */
++	}
++};
++
++static struct mtd_partition static_partitions_4M[] =
++{
++	{
++		.name		= "bootloader",
++		.offset		= 0,
++		.size		= 1 * 64 * 8 * 528,	/* 1st sector = 64 blocks * 8 pages * 528 bytes */
++		.mask_flags	= MTD_WRITEABLE,	/* read-only */
++	},
++	{
++		.name		= "kernel",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 4 * 64 * 8 * 528,	/* 4 sectors */
++	},
++	{
++		.name		= "filesystem",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= MTDPART_SIZ_FULL,	/* rest = 11 sectors */
++	}
++};
++
++#if defined(CONFIG_MACH_KAFA)
++static struct mtd_partition static_partitions_8M[] =
++{
++	{
++		name:		"romboot",
++		offset:		0,
++		size:		16 * 1056,	/* 160 Kb */
++		mask_flags:	MTD_WRITEABLE,		/* read-only */
++	},
++	{
++		name:		"uboot",
++		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++		size:		128 * 1056,		/* 1 MB  */
++	},
++	{
++		name:		"kernel",
++		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++		size:		1024 * 1056,		/* 1 MB  */
++	},
++	{
++		name:		"filesystem",
++		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++		size:		MTDPART_SIZ_FULL,
++	}
++};
++
++#else
++
++static struct mtd_partition static_partitions_8M[] =
++{
++	{
++		.name		= "bootloader",
++		.offset		= 0,
++		.size		= 1 * 32 * 8 * 1056,	/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++		.mask_flags	= MTD_WRITEABLE,	/* read-only */
++	},
++	{
++		.name		= "kernel",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
++	},
++	{
++		.name		= "filesystem",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
++	}
++};
++#endif
++
++static const char *part_probes[] = { "cmdlinepart", NULL, };
++
++#endif
++
++/* ......................................................................... */
++
++/* Allocate a single SPI transfer descriptor.  We're assuming that if multiple
++   SPI transfers occur at the same time, spi_access_bus() will serialize them.
++   If this is not valid, then either (i) each dataflash 'priv' structure
++   needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
++   another mechanism.   */
++static struct spi_transfer_list* spi_transfer_desc;
++
++/*
++ * Perform a SPI transfer to access the DataFlash device.
++ */
++static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
++		char* txnext, int txnext_len, char* rxnext, int rxnext_len)
++{
++	struct spi_transfer_list* list = spi_transfer_desc;
++
++	list->tx[0] = tx;	list->txlen[0] = tx_len;
++	list->rx[0] = rx;	list->rxlen[0] = rx_len;
++
++	list->tx[1] = txnext; 	list->txlen[1] = txnext_len;
++	list->rx[1] = rxnext;	list->rxlen[1] = rxnext_len;
++
++	list->nr_transfers = nr;
++
++	return spi_transfer(list);
++}
++
++/* ......................................................................... */
++
++/*
++ * Poll the DataFlash device until it is READY.
++ */
++static void at91_dataflash_waitready(void)
++{
++	char* command = kmalloc(2, GFP_KERNEL);
++
++	if (!command)
++		return;
++
++	do {
++		command[0] = OP_READ_STATUS;
++		command[1] = 0;
++
++		do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++	} while ((command[1] & 0x80) == 0);
++
++	kfree(command);
++}
++
++/*
++ * Return the status of the DataFlash device.
++ */
++static unsigned short at91_dataflash_status(void)
++{
++	unsigned short status;
++	char* command = kmalloc(2, GFP_KERNEL);
++
++	if (!command)
++		return 0;
++
++	command[0] = OP_READ_STATUS;
++	command[1] = 0;
++
++	do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++	status = command[1];
++
++	kfree(command);
++	return status;
++}
++
++/* ......................................................................... */
++
++/*
++ * Erase blocks of flash.
++ */
++static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++	unsigned int pageaddr;
++	char* command;
++
++#ifdef DEBUG_DATAFLASH
++	printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
++#endif
++
++	/* Sanity checks */
++	if (instr->addr + instr->len > mtd->size)
++		return -EINVAL;
++	if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
++		return -EINVAL;
++	if ((instr->addr % priv->page_size) != 0)
++		return -EINVAL;
++
++	command = kmalloc(4, GFP_KERNEL);
++	if (!command)
++		return -ENOMEM;
++
++	while (instr->len > 0) {
++		/* Calculate flash page address */
++		pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
++
++		command[0] = OP_ERASE_PAGE;
++		command[1] = (pageaddr & 0x00FF0000) >> 16;
++		command[2] = (pageaddr & 0x0000FF00) >> 8;
++		command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++		printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
++#endif
++
++		/* Send command to SPI device */
++		spi_access_bus(priv->spi);
++		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++
++		at91_dataflash_waitready();		/* poll status until ready */
++		spi_release_bus(priv->spi);
++
++		instr->addr += priv->page_size;		/* next page */
++		instr->len -= priv->page_size;
++	}
++
++	kfree(command);
++
++	/* Inform MTD subsystem that erase is complete */
++	instr->state = MTD_ERASE_DONE;
++	if (instr->callback)
++		instr->callback(instr);
++
++	return 0;
++}
++
++/*
++ * Read from the DataFlash device.
++ *   from   : Start offset in flash device
++ *   len    : Amount to read
++ *   retlen : About of data actually read
++ *   buf    : Buffer containing the data
++ */
++static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++	unsigned int addr;
++	char* command;
++
++#ifdef DEBUG_DATAFLASH
++	printk("dataflash_read: %lli .. %lli\n", from, from+len);
++#endif
++
++	*retlen = 0;
++
++	/* Sanity checks */
++	if (!len)
++		return 0;
++	if (from + len > mtd->size)
++		return -EINVAL;
++
++	/* Calculate flash page/byte address */
++	addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
++
++	command = kmalloc(8, GFP_KERNEL);
++	if (!command)
++		return -ENOMEM;
++
++	command[0] = OP_READ_CONTINUOUS;
++	command[1] = (addr & 0x00FF0000) >> 16;
++	command[2] = (addr & 0x0000FF00) >> 8;
++	command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++	printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++
++	/* Send command to SPI device */
++	spi_access_bus(priv->spi);
++	do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
++	spi_release_bus(priv->spi);
++
++	*retlen = len;
++	kfree(command);
++	return 0;
++}
++
++/*
++ * Write to the DataFlash device.
++ *   to     : Start offset in flash device
++ *   len    : Amount to write
++ *   retlen : Amount of data actually written
++ *   buf    : Buffer containing the data
++ */
++static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++	unsigned int pageaddr, addr, offset, writelen;
++	size_t remaining;
++	u_char *writebuf;
++	unsigned short status;
++	int res = 0;
++	char* command;
++	char* tmpbuf = NULL;
++
++#ifdef DEBUG_DATAFLASH
++	printk("dataflash_write: %lli .. %lli\n", to, to+len);
++#endif
++
++	*retlen = 0;
++
++	/* Sanity checks */
++	if (!len)
++		return 0;
++	if (to + len > mtd->size)
++		return -EINVAL;
++
++	command = kmalloc(4, GFP_KERNEL);
++	if (!command)
++		return -ENOMEM;
++
++	pageaddr = ((unsigned)to / priv->page_size);
++	offset = ((unsigned)to % priv->page_size);
++	if (offset + len > priv->page_size)
++		writelen = priv->page_size - offset;
++	else
++		writelen = len;
++	writebuf = (u_char *)buf;
++	remaining = len;
++
++	/* Allocate temporary buffer */
++	tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
++	if (!tmpbuf) {
++		kfree(command);
++		return -ENOMEM;
++	}
++
++	/* Gain access to the SPI bus */
++	spi_access_bus(priv->spi);
++
++	while (remaining > 0) {
++#ifdef DEBUG_DATAFLASH
++		printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
++#endif
++
++		/* (1) Transfer to Buffer1 */
++		if (writelen != priv->page_size) {
++			addr = pageaddr << priv->page_offset;
++			command[0] = OP_TRANSFER_BUF1;
++			command[1] = (addr & 0x00FF0000) >> 16;
++			command[2] = (addr & 0x0000FF00) >> 8;
++			command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++			printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++			do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++			at91_dataflash_waitready();
++		}
++
++		/* (2) Program via Buffer1 */
++		addr = (pageaddr << priv->page_offset) + offset;
++		command[0] = OP_PROGRAM_VIA_BUF1;
++		command[1] = (addr & 0x00FF0000) >> 16;
++		command[2] = (addr & 0x0000FF00) >> 8;
++		command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++		printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++		do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
++		at91_dataflash_waitready();
++
++		/* (3) Compare to Buffer1 */
++		addr = pageaddr << priv->page_offset;
++		command[0] = OP_COMPARE_BUF1;
++		command[1] = (addr & 0x00FF0000) >> 16;
++		command[2] = (addr & 0x0000FF00) >> 8;
++		command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++		printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++		at91_dataflash_waitready();
++
++		/* Get result of the compare operation */
++		status = at91_dataflash_status();
++		if ((status & 0x40) == 1) {
++			printk("at91_dataflash: Write error on page %i\n", pageaddr);
++			remaining = 0;
++			res = -EIO;
++		}
++
++		remaining = remaining - writelen;
++		pageaddr++;
++		offset = 0;
++		writebuf += writelen;
++		*retlen += writelen;
++
++		if (remaining > priv->page_size)
++			writelen = priv->page_size;
++		else
++			writelen = remaining;
++	}
++
++	/* Release SPI bus */
++	spi_release_bus(priv->spi);
++
++	kfree(tmpbuf);
++	kfree(command);
++	return res;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize and register DataFlash device with MTD subsystem.
++ */
++static int __init add_dataflash(int channel, char *name, int IDsize,
++		int nr_pages, int pagesize, int pageoffset)
++{
++	struct mtd_info *device;
++	struct dataflash_local *priv;
++#ifdef CONFIG_MTD_PARTITIONS
++	struct mtd_partition *mtd_parts = 0;
++	int mtd_parts_nr = 0;
++#endif
++
++	if (nr_devices >= DATAFLASH_MAX_DEVICES) {
++		printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
++		return 0;
++	}
++
++	device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
++	if (!device)
++		return -ENOMEM;
++	memset(device, 0, sizeof(struct mtd_info));
++
++	device->name = (char *)&device[1];
++	sprintf(device->name, "%s.spi%d", name, channel);
++	device->size = nr_pages * pagesize;
++	device->erasesize = pagesize;
++	device->writesize = pagesize;
++	device->owner = THIS_MODULE;
++	device->type = MTD_DATAFLASH;
++	device->flags = MTD_WRITEABLE;
++	device->erase = at91_dataflash_erase;
++	device->read = at91_dataflash_read;
++	device->write = at91_dataflash_write;
++
++	priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
++	if (!priv) {
++		kfree(device);
++		return -ENOMEM;
++	}
++	memset(priv, 0, sizeof(struct dataflash_local));
++
++	priv->spi = channel;
++	priv->page_size = pagesize;
++	priv->page_offset = pageoffset;
++	device->priv = priv;
++
++	mtd_devices[nr_devices] = device;
++	nr_devices++;
++	printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
++
++#ifdef CONFIG_MTD_PARTITIONS
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++	mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
++#endif
++	if (mtd_parts_nr <= 0) {
++		switch (IDsize) {
++			case SZ_2M:
++				mtd_parts = static_partitions_2M;
++				mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
++				break;
++			case SZ_4M:
++				mtd_parts = static_partitions_4M;
++				mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
++				break;
++			case SZ_8M:
++				mtd_parts = static_partitions_8M;
++				mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
++				break;
++		}
++	}
++
++	if (mtd_parts_nr > 0) {
++#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
++		add_mtd_device(device);
++#endif
++		return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
++	}
++#endif
++	return add_mtd_device(device);		/* add whole device */
++}
++
++/*
++ * Detect and initialize DataFlash device connected to specified SPI channel.
++ *
++ *   Device            Density         ID code                 Nr Pages        Page Size       Page offset
++ *   AT45DB011B        1Mbit   (128K)  xx0011xx (0x0c)         512             264             9
++ *   AT45DB021B        2Mbit   (256K)  xx0101xx (0x14)         1025            264             9
++ *   AT45DB041B        4Mbit   (512K)  xx0111xx (0x1c)         2048            264             9
++ *   AT45DB081B        8Mbit   (1M)    xx1001xx (0x24)         4096            264             9
++ *   AT45DB0161B       16Mbit  (2M)    xx1011xx (0x2c)         4096            528             10
++ *   AT45DB0321B       32Mbit  (4M)    xx1101xx (0x34)         8192            528             10
++ *   AT45DB0642        64Mbit  (8M)    xx1111xx (0x3c)         8192            1056            11
++ *   AT45DB1282        128Mbit (16M)   xx0100xx (0x10)         16384           1056            11
++ */
++static int __init at91_dataflash_detect(int channel)
++{
++	int res = 0;
++	unsigned short status;
++
++	spi_access_bus(channel);
++	status = at91_dataflash_status();
++	spi_release_bus(channel);
++	if (status != 0xff) {			/* no dataflash device there */
++		switch (status & 0x3c) {
++			case 0x0c:	/* 0 0 1 1 */
++				res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
++				break;
++			case 0x14:	/* 0 1 0 1 */
++				res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
++				break;
++			case 0x1c:	/* 0 1 1 1 */
++				res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
++				break;
++			case 0x24:	/* 1 0 0 1 */
++				res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
++				break;
++			case 0x2c:	/* 1 0 1 1 */
++				res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
++				break;
++			case 0x34:	/* 1 1 0 1 */
++				res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
++				break;
++			case 0x3c:	/* 1 1 1 1 */
++				res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
++				break;
++// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
++//			case 0x10:	/* 0 1 0 0 */
++//				res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
++//				break;
++			default:
++				printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
++		}
++	}
++
++	return res;
++}
++
++static int __init at91_dataflash_init(void)
++{
++	spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++	if (!spi_transfer_desc)
++		return -ENOMEM;
++
++	/* DataFlash (SPI chip select 0) */
++	at91_dataflash_detect(0);
++
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++	/* DataFlash card (SPI chip select 3) */
++	at91_dataflash_detect(3);
++#endif
++
++	return 0;
++}
++
++static void __exit at91_dataflash_exit(void)
++{
++	int i;
++
++	for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
++		if (mtd_devices[i]) {
++#ifdef CONFIG_MTD_PARTITIONS
++			del_mtd_partitions(mtd_devices[i]);
++#else
++			del_mtd_device(mtd_devices[i]);
++#endif
++			kfree(mtd_devices[i]->priv);
++			kfree(mtd_devices[i]);
++		}
++	}
++	nr_devices = 0;
++	kfree(spi_transfer_desc);
++}
++
++
++module_init(at91_dataflash_init);
++module_exit(at91_dataflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/devices/mtd_dataflash.c linux-2.6.19/drivers/mtd/devices/mtd_dataflash.c
+--- linux-2.6.19-final/drivers/mtd/devices/mtd_dataflash.c	Mon Dec  4 16:33:42 2006
++++ linux-2.6.19/drivers/mtd/devices/mtd_dataflash.c	Mon Dec  4 16:12:32 2006
+@@ -480,7 +480,7 @@
+ 	device->writesize = pagesize;
+ 	device->owner = THIS_MODULE;
+ 	device->type = MTD_DATAFLASH;
+-	device->flags = MTD_CAP_NORFLASH;
++	device->flags = MTD_WRITEABLE;
+ 	device->erase = dataflash_erase;
+ 	device->read = dataflash_read;
+ 	device->write = dataflash_write;
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/maps/Kconfig linux-2.6.19/drivers/mtd/maps/Kconfig
+--- linux-2.6.19-final/drivers/mtd/maps/Kconfig	Mon Dec  4 16:40:13 2006
++++ linux-2.6.19/drivers/mtd/maps/Kconfig	Mon Nov 20 10:49:27 2006
+@@ -622,5 +622,25 @@
+ 
+ 	  This selection automatically selects the map_ram driver.
+ 
++config MTD_CSB337
++	bool "Flash mapped on Cogent CSB337"
++	depends on MTD && MACH_CSB337
++	help
++	  This enables access to the flash chip on the Cogent CSB337
++	  single board computer.  The default behavior of the startup
++	  script the comes with BSPs for that board is to pass the address
++	  of a file romfs.img, which is assumed to be a romfs filesystem image
++	  to be used as the initial root filesystem.
++
++config MTD_CSB637
++	bool "Flash mapped on Cogent CSB637"
++	depends on MTD && MACH_CSB637
++	help
++	  This enables access to the flash chip on the Cogent CSB637
++	  single board computer.  The default behavior of the startup
++	  script the comes with BSPs for that board is to pass the address
++	  of a file romfs.img, which is assumed to be a romfs filesystem image
++	  to be used as the initial root filesystem.
++
+ endmenu
+ 
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/maps/Makefile linux-2.6.19/drivers/mtd/maps/Makefile
+--- linux-2.6.19-final/drivers/mtd/maps/Makefile	Mon Dec  4 16:40:13 2006
++++ linux-2.6.19/drivers/mtd/maps/Makefile	Mon Nov 20 10:49:37 2006
+@@ -70,3 +70,5 @@
+ obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
+ obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
+ obj-$(CONFIG_MTD_TQM834x)	+= tqm834x.o
++obj-$(CONFIG_MTD_CSB337)	+= csbxxx.o
++obj-$(CONFIG_MTD_CSB637)	+= csbxxx.o
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/maps/csbxxx.c linux-2.6.19/drivers/mtd/maps/csbxxx.c
+--- linux-2.6.19-final/drivers/mtd/maps/csbxxx.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/mtd/maps/csbxxx.c	Tue Oct 24 08:53:30 2006
+@@ -0,0 +1,143 @@
++/*
++ * Map driver for the Cogent CSBxxx boards.
++ *
++ * Author:	Bill Gatliff
++ * Copyright:	(C) 2005 Bill Gatliff <bgat@billgatliff.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/dma-mapping.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <asm/io.h>
++#include <asm/hardware.h>
++
++#define MTDID "flash00"
++#define MSG_PREFIX "csbxxx: "
++
++#if defined(CONFIG_MACH_CSB337) || defined(CONFIG_MACH_CSB637)
++#define WINDOW_ADDR 0x10000000
++#define WINDOW_SIZE 0x1000000
++#else
++#error TODO: the MTD map you need goes here...
++#endif
++
++/*
++ * default map definition
++ * (generally overridden on the command line)
++ */
++static struct mtd_partition csbxxx_partitions[] = {
++	{
++		.name		= "uMON flash",
++		.size		= WINDOW_SIZE,
++		.mask_flags	= MTD_WRITEABLE		/* force read-only */
++	},
++};
++
++static void csbxxx_map_inval_cache(struct map_info *map, unsigned long from, ssize_t len)
++{
++	consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);
++}
++static struct map_info csbxxx_map = {
++	.size		= WINDOW_SIZE,
++	.phys		= WINDOW_ADDR,
++	.inval_cache	= csbxxx_map_inval_cache,
++	.bankwidth	= 2,
++	.name		= MTDID,
++};
++
++static const char *probes[] = { "cmdlinepart", NULL };
++
++static struct mtd_info *mymtd = 0;
++static int mtd_parts_nb = 0;
++static struct mtd_partition *mtd_parts = 0;
++
++static int __init init_csbxxx(void)
++{
++	int ret = 0;
++	const char *part_type = 0;
++
++	csbxxx_map.virt = ioremap(csbxxx_map.phys, WINDOW_SIZE);
++	if (!csbxxx_map.virt) {
++		printk(KERN_WARNING "Failed to ioremap %s, MTD disabled\n", csbxxx_map.name);
++		ret = -ENOMEM;
++		goto err;
++	}
++	csbxxx_map.cached = ioremap_cached(csbxxx_map.phys, WINDOW_SIZE);
++	if (!csbxxx_map.cached)
++		printk(KERN_WARNING "Failed to ioremap cached %s\n", csbxxx_map.name);
++
++	simple_map_init(&csbxxx_map);
++
++	printk(KERN_NOTICE "Probing %s at physical address 0x%08lx (%d-bit bankwidth)\n",
++			csbxxx_map.name, csbxxx_map.phys, csbxxx_map.bankwidth * 8);
++
++	mymtd = do_map_probe("cfi_probe", &csbxxx_map);
++	if (!mymtd)
++		goto err;
++
++	mymtd->owner = THIS_MODULE;
++
++	mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0);
++
++#ifdef CONFIG_MTD_PARTITIONS
++	if (mtd_parts_nb > 0)
++		part_type = "command line";
++	else if (mtd_parts_nb == 0) {
++		mtd_parts = csbxxx_partitions;
++		mtd_parts_nb = ARRAY_SIZE(csbxxx_partitions);
++		part_type = "static";
++	}
++	else
++		goto err;
++
++	if (mtd_parts_nb == 0)
++		printk(KERN_NOTICE MSG_PREFIX "no partition info available\n");
++	else {
++		printk(KERN_NOTICE MSG_PREFIX "using %s partition definition\n", part_type);
++		add_mtd_partitions(mymtd, mtd_parts, mtd_parts_nb);
++	}
++#else
++	add_mtd_device(mymtd);
++#endif
++
++	return 0;
++
++err:
++	if (csbxxx_map.virt)
++		iounmap(csbxxx_map.virt);
++	if (csbxxx_map.cached)
++		iounmap(csbxxx_map.cached);
++	if (!ret)
++		ret = -EIO;
++
++	return ret;
++}
++
++static void __exit cleanup_csbxxx(void)
++{
++	if (!mymtd)
++		return;
++
++	del_mtd_partitions(mymtd);
++
++	map_destroy(mymtd);
++	iounmap((void *)csbxxx_map.virt);
++	if (csbxxx_map.cached)
++		iounmap(csbxxx_map.cached);
++}
++
++module_init(init_csbxxx);
++module_exit(cleanup_csbxxx);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Bill Gatliff <bgat@billgatliff.com>");
++MODULE_DESCRIPTION("MTD map driver for Cogent CSBXXX");
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/nand/Kconfig linux-2.6.19/drivers/mtd/nand/Kconfig
+--- linux-2.6.19-final/drivers/mtd/nand/Kconfig	Mon Dec  4 16:40:13 2006
++++ linux-2.6.19/drivers/mtd/nand/Kconfig	Thu Oct 12 17:07:39 2006
+@@ -232,6 +232,13 @@
+ 
+ 	  If you say "m", the module will be called "cs553x_nand.ko".
+ 
++config MTD_NAND_AT91
++	bool "Support for NAND Flash / SmartMedia on AT91"
++	depends on MTD_NAND && ARCH_AT91
++	help
++	  Enables support for NAND Flash / Smart Media Card interface
++	  on Atmel AT91 processors.
++
+ config MTD_NAND_NANDSIM
+ 	tristate "Support for NAND Flash Simulator"
+ 	depends on MTD_NAND && MTD_PARTITIONS
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/nand/Makefile linux-2.6.19/drivers/mtd/nand/Makefile
+--- linux-2.6.19-final/drivers/mtd/nand/Makefile	Mon Dec  4 16:33:43 2006
++++ linux-2.6.19/drivers/mtd/nand/Makefile	Thu Oct 12 17:07:39 2006
+@@ -22,5 +22,6 @@
+ obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
+ obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
+ obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
++obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
+ 
+ nand-objs = nand_base.o nand_bbt.o
+diff -urN -x CVS linux-2.6.19-final/drivers/mtd/nand/at91_nand.c linux-2.6.19/drivers/mtd/nand/at91_nand.c
+--- linux-2.6.19-final/drivers/mtd/nand/at91_nand.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/mtd/nand/at91_nand.c	Wed Nov 15 08:12:22 2006
+@@ -0,0 +1,223 @@
++/*
++ * drivers/mtd/nand/at91_nand.c
++ *
++ *  Copyright (C) 2003 Rick Bronson
++ *
++ *  Derived from drivers/mtd/nand/autcpu12.c
++ *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
++ *
++ *  Derived from drivers/mtd/spia.c
++ *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/io.h>
++#include <asm/sizes.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++struct at91_nand_host {
++	struct nand_chip	nand_chip;
++	struct mtd_info		mtd;
++	void __iomem		*io_base;
++	struct at91_nand_data	*board;
++};
++
++/*
++ * Hardware specific access to control-lines
++ */
++static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct at91_nand_host *host = nand_chip->priv;
++
++	if (cmd == NAND_CMD_NONE)
++		return;
++
++	if (ctrl & NAND_CLE)
++		writeb(cmd, host->io_base + (1 << host->board->cle));
++	else
++		writeb(cmd, host->io_base + (1 << host->board->ale));
++}
++
++/*
++ * Read the Device Ready pin.
++ */
++static int at91_nand_device_ready(struct mtd_info *mtd)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct at91_nand_host *host = nand_chip->priv;
++
++	return at91_get_gpio_value(host->board->rdy_pin);
++}
++
++/*
++ * Enable NAND.
++ */
++static void at91_nand_enable(struct at91_nand_host *host)
++{
++	if (host->board->enable_pin)
++		at91_set_gpio_value(host->board->enable_pin, 0);
++}
++
++/*
++ * Disable NAND.
++ */
++static void at91_nand_disable(struct at91_nand_host *host)
++{
++	if (host->board->enable_pin)
++		at91_set_gpio_value(host->board->enable_pin, 1);
++}
++
++/*
++ * Probe for the NAND device.
++ */
++static int __init at91_nand_probe(struct platform_device *pdev)
++{
++	struct at91_nand_host *host;
++	struct mtd_info *mtd;
++	struct nand_chip *nand_chip;
++	int res;
++
++#ifdef CONFIG_MTD_PARTITIONS
++	struct mtd_partition *partitions = NULL;
++	int num_partitions = 0;
++#endif
++
++	/* Allocate memory for the device structure (and zero it) */
++	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
++	if (!host) {
++		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
++		return -ENOMEM;
++	}
++
++	host->io_base = ioremap(pdev->resource[0].start,
++				pdev->resource[0].end - pdev->resource[0].start + 1);
++	if (host->io_base == NULL) {
++		printk(KERN_ERR "at91_nand: ioremap failed\n");
++		kfree(host);
++		return -EIO;
++	}
++
++	mtd = &host->mtd;
++	nand_chip = &host->nand_chip;
++	host->board = pdev->dev.platform_data;
++
++	nand_chip->priv = host;		/* link the private data structures */
++	mtd->priv = nand_chip;
++	mtd->owner = THIS_MODULE;
++
++	/* Set address of NAND IO lines */
++	nand_chip->IO_ADDR_R = host->io_base;
++	nand_chip->IO_ADDR_W = host->io_base;
++	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
++	nand_chip->dev_ready = at91_nand_device_ready;
++	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
++	nand_chip->chip_delay = 20;		/* 20us command delay time */
++
++	if (host->board->bus_width_16)		/* 16-bit bus width */
++		nand_chip->options |= NAND_BUSWIDTH_16;
++
++	platform_set_drvdata(pdev, host);
++	at91_nand_enable(host);
++
++	if (host->board->det_pin) {
++		if (at91_get_gpio_value(host->board->det_pin)) {
++			printk ("No SmartMedia card inserted.\n");
++			res = ENXIO;
++			goto out;
++		}
++	}
++
++	/* Scan to find existance of the device */
++	if (nand_scan(mtd, 1)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++#ifdef CONFIG_MTD_PARTITIONS
++	if (host->board->partition_info)
++		partitions = host->board->partition_info(mtd->size, &num_partitions);
++
++	if ((!partitions) || (num_partitions == 0)) {
++		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
++		res = ENXIO;
++		goto release;
++	}
++
++	res = add_mtd_partitions(mtd, partitions, num_partitions);
++#else
++	res = add_mtd_device(mtd);
++#endif
++
++	if (!res)
++		return res;
++
++release:
++	nand_release(mtd);
++out:
++	at91_nand_disable(host);
++	platform_set_drvdata(pdev, NULL);
++	iounmap(host->io_base);
++	kfree(host);
++	return res;
++}
++
++/*
++ * Remove a NAND device.
++ */
++static int __devexit at91_nand_remove(struct platform_device *pdev)
++{
++	struct at91_nand_host *host = platform_get_drvdata(pdev);
++	struct mtd_info *mtd = &host->mtd;
++
++	nand_release(mtd);
++
++	at91_nand_disable(host);
++
++	iounmap(host->io_base);
++	kfree(host);
++
++	return 0;
++}
++
++static struct platform_driver at91_nand_driver = {
++	.probe		= at91_nand_probe,
++	.remove		= at91_nand_remove,
++	.driver		= {
++		.name	= "at91_nand",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91_nand_init(void)
++{
++	return platform_driver_register(&at91_nand_driver);
++}
++
++
++static void __exit at91_nand_exit(void)
++{
++	platform_driver_unregister(&at91_nand_driver);
++}
++
++
++module_init(at91_nand_init);
++module_exit(at91_nand_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Rick Bronson");
++MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
+diff -urN -x CVS linux-2.6.19-final/drivers/net/arm/at91_ether.c linux-2.6.19/drivers/net/arm/at91_ether.c
+--- linux-2.6.19-final/drivers/net/arm/at91_ether.c	Mon Dec  4 16:40:14 2006
++++ linux-2.6.19/drivers/net/arm/at91_ether.c	Thu Nov 23 15:50:12 2006
+@@ -41,9 +41,6 @@
+ #define DRV_NAME	"at91_ether"
+ #define DRV_VERSION	"1.0"
+ 
+-static struct net_device *at91_dev;
+-
+-static struct timer_list check_timer;
+ #define LINK_POLL_INTERVAL	(HZ)
+ 
+ /* ..................................................................... */
+@@ -252,8 +249,8 @@
+ 		 * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
+ 		 * or board does not have it connected.
+ 		 */
+-		check_timer.expires = jiffies + LINK_POLL_INTERVAL;
+-		add_timer(&check_timer);
++		lp->check_timer.expires = jiffies + LINK_POLL_INTERVAL;
++		add_timer(&lp->check_timer);
+ 		return;
+ 	}
+ 
+@@ -300,7 +297,7 @@
+ 
+ 	irq_number = lp->board_data.phy_irq_pin;
+ 	if (!irq_number) {
+-		del_timer_sync(&check_timer);
++		del_timer_sync(&lp->check_timer);
+ 		return;
+ 	}
+ 
+@@ -362,13 +359,14 @@
+ static void at91ether_check_link(unsigned long dev_id)
+ {
+ 	struct net_device *dev = (struct net_device *) dev_id;
++	struct at91_private *lp = (struct at91_private *) dev->priv;
+ 
+ 	enable_mdi();
+ 	update_linkspeed(dev, 1);
+ 	disable_mdi();
+ 
+-	check_timer.expires = jiffies + LINK_POLL_INTERVAL;
+-	add_timer(&check_timer);
++	lp->check_timer.expires = jiffies + LINK_POLL_INTERVAL;
++	add_timer(&lp->check_timer);
+ }
+ 
+ /* ......................... ADDRESS MANAGEMENT ........................ */
+@@ -857,14 +855,13 @@
+ 	while (dlist->descriptors[lp->rxBuffIndex].addr & EMAC_DESC_DONE) {
+ 		p_recv = dlist->recv_buf[lp->rxBuffIndex];
+ 		pktlen = dlist->descriptors[lp->rxBuffIndex].size & 0x7ff;	/* Length of frame including FCS */
+-		skb = alloc_skb(pktlen + 2, GFP_ATOMIC);
++		skb = dev_alloc_skb(pktlen + 2);
+ 		if (skb != NULL) {
+ 			skb_reserve(skb, 2);
+ 			memcpy(skb_put(skb, pktlen), p_recv, pktlen);
+ 
+ 			skb->dev = dev;
+ 			skb->protocol = eth_type_trans(skb, dev);
+-			skb->len = pktlen;
+ 			dev->last_rx = jiffies;
+ 			lp->stats.rx_bytes += pktlen;
+ 			netif_rx(skb);
+@@ -927,27 +924,43 @@
+ 	return IRQ_HANDLED;
+ }
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++static void at91ether_poll_controller(struct net_device *dev)
++{
++	unsigned long flags;
++
++	local_irq_save(flags);
++	at91ether_interrupt(dev->irq, dev, NULL);
++	local_irq_restore(flags);
++}
++#endif
++
+ /*
+  * Initialize the ethernet interface
+  */
+ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
+ 			struct platform_device *pdev, struct clk *ether_clk)
+ {
+-	struct at91_eth_data *board_data = pdev->dev.platform_data;
++	struct eth_platform_data *board_data = pdev->dev.platform_data;
+ 	struct net_device *dev;
+ 	struct at91_private *lp;
+ 	unsigned int val;
+-	int res;
+-
+-	if (at91_dev)			/* already initialized */
+-		return 0;
++	struct resource *res;
++	int ret;
+ 
+ 	dev = alloc_etherdev(sizeof(struct at91_private));
+ 	if (!dev)
+ 		return -ENOMEM;
+ 
+-	dev->base_addr = AT91_VA_BASE_EMAC;
+-	dev->irq = AT91RM9200_ID_EMAC;
++	/* Get I/O base address and IRQ */
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		free_netdev(dev);
++		return -ENODEV;  
++	}
++	dev->base_addr = res->start;
++	dev->irq = platform_get_irq(pdev, 0);
++
+ 	SET_MODULE_OWNER(dev);
+ 
+ 	/* Install the interrupt handler */
+@@ -979,6 +992,9 @@
+ 	dev->set_mac_address = set_mac_address;
+ 	dev->ethtool_ops = &at91ether_ethtool_ops;
+ 	dev->do_ioctl = at91ether_ioctl;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++	dev->poll_controller = at91ether_poll_controller;
++#endif
+ 
+ 	SET_NETDEV_DEV(dev, &pdev->dev);
+ 
+@@ -1017,14 +1033,13 @@
+ 	lp->phy_address = phy_address;	/* MDI address of PHY */
+ 
+ 	/* Register the network interface */
+-	res = register_netdev(dev);
+-	if (res) {
++	ret = register_netdev(dev);
++	if (ret) {
+ 		free_irq(dev->irq, dev);
+ 		free_netdev(dev);
+ 		dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
+-		return res;
++		return ret;
+ 	}
+-	at91_dev = dev;
+ 
+ 	/* Determine current link speed */
+ 	spin_lock_irq(&lp->lock);
+@@ -1036,9 +1051,9 @@
+ 
+ 	/* If board has no PHY IRQ, use a timer to poll the PHY */
+ 	if (!lp->board_data.phy_irq_pin) {
+-		init_timer(&check_timer);
+-		check_timer.data = (unsigned long)dev;
+-		check_timer.function = at91ether_check_link;
++		init_timer(&lp->check_timer);
++		lp->check_timer.data = (unsigned long)dev;
++		lp->check_timer.function = at91ether_check_link;
+ 	}
+ 
+ 	/* Display ethernet banner */
+@@ -1115,15 +1130,16 @@
+ 
+ static int __devexit at91ether_remove(struct platform_device *pdev)
+ {
+-	struct at91_private *lp = (struct at91_private *) at91_dev->priv;
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct at91_private *lp = (struct at91_private *) dev->priv;
+ 
+-	unregister_netdev(at91_dev);
+-	free_irq(at91_dev->irq, at91_dev);
++	unregister_netdev(dev);
++	free_irq(dev->irq, dev);
+ 	dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
+ 	clk_put(lp->ether_clk);
+ 
+-	free_netdev(at91_dev);
+-	at91_dev = NULL;
++	platform_set_drvdata(pdev, NULL);
++	free_netdev(dev);
+ 	return 0;
+ }
+ 
+@@ -1131,8 +1147,8 @@
+ 
+ static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
+ {
+-	struct at91_private *lp = (struct at91_private *) at91_dev->priv;
+ 	struct net_device *net_dev = platform_get_drvdata(pdev);
++	struct at91_private *lp = (struct at91_private *) net_dev->priv;
+ 	int phy_irq = lp->board_data.phy_irq_pin;
+ 
+ 	if (netif_running(net_dev)) {
+@@ -1149,8 +1165,8 @@
+ 
+ static int at91ether_resume(struct platform_device *pdev)
+ {
+-	struct at91_private *lp = (struct at91_private *) at91_dev->priv;
+ 	struct net_device *net_dev = platform_get_drvdata(pdev);
++	struct at91_private *lp = (struct at91_private *) net_dev->priv;
+ 	int phy_irq = lp->board_data.phy_irq_pin;
+ 
+ 	if (netif_running(net_dev)) {
+diff -urN -x CVS linux-2.6.19-final/drivers/net/arm/at91_ether.h linux-2.6.19/drivers/net/arm/at91_ether.h
+--- linux-2.6.19-final/drivers/net/arm/at91_ether.h	Mon Dec  4 16:33:44 2006
++++ linux-2.6.19/drivers/net/arm/at91_ether.h	Thu Nov 23 15:50:12 2006
+@@ -79,7 +79,7 @@
+ {
+ 	struct net_device_stats stats;
+ 	struct mii_if_info mii;			/* ethtool support */
+-	struct at91_eth_data board_data;	/* board-specific configuration */
++	struct eth_platform_data board_data;	/* board-specific configuration */
+ 	struct clk *ether_clk;			/* clock */
+ 
+ 	/* PHY */
+@@ -87,6 +87,7 @@
+ 	spinlock_t lock;			/* lock for MDI interface */
+ 	short phy_media;			/* media interface type */
+ 	unsigned short phy_address;		/* 5-bit MDI address of PHY (0..31) */
++	struct timer_list check_timer;		/* Poll link status */
+ 
+ 	/* Transmit */
+ 	struct sk_buff *skb;			/* holds skb until xmit interrupt completes */
+diff -urN -x CVS linux-2.6.19-final/drivers/pcmcia/at91_cf.c linux-2.6.19/drivers/pcmcia/at91_cf.c
+--- linux-2.6.19-final/drivers/pcmcia/at91_cf.c	Mon Dec  4 16:40:25 2006
++++ linux-2.6.19/drivers/pcmcia/at91_cf.c	Thu Nov 16 17:27:11 2006
+@@ -23,19 +23,20 @@
+ #include <asm/io.h>
+ #include <asm/sizes.h>
+ 
+-#include <asm/arch/at91rm9200.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
++#include <asm/arch/at91rm9200_mc.h>
+ 
+ 
+ /*
+  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW;
+  * some other bit in {A24,A22..A11} is nREG to flag memory access
+  * (vs attributes).  So more than 2KB/region would just be waste.
++ * Note: These are offsets from the physical base address.
+  */
+-#define	CF_ATTR_PHYS	(AT91_CF_BASE)
+-#define	CF_IO_PHYS	(AT91_CF_BASE  + (1 << 23))
+-#define	CF_MEM_PHYS	(AT91_CF_BASE  + 0x017ff800)
++#define	CF_ATTR_PHYS	(0)
++#define	CF_IO_PHYS	(1 << 23)
++#define	CF_MEM_PHYS	(0x017ff800)
+ 
+ /*--------------------------------------------------------------------------*/
+ 
+@@ -48,6 +49,8 @@
+ 
+ 	struct platform_device	*pdev;
+ 	struct at91_cf_data	*board;
++	
++	unsigned long		phys_baseaddr;
+ };
+ 
+ #define	SZ_2K			(2 * SZ_1K)
+@@ -154,9 +157,8 @@
+ 
+ 	/*
+ 	 * Use 16 bit accesses unless/until we need 8-bit i/o space.
+-	 * Always set CSR4 ... PCMCIA won't always unmap things.
+ 	 */
+-	csr = at91_sys_read(AT91_SMC_CSR(4)) & ~AT91_SMC_DBW;
++	csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW;
+ 
+ 	/*
+ 	 * NOTE: this CF controller ignores IOIS16, so we can't really do
+@@ -168,14 +170,14 @@
+ 	 * some cards only like that way to get at the odd byte, despite
+ 	 * CF 3.0 spec table 35 also giving the D8-D15 option.
+ 	 */
+-	if (!(io->flags & (MAP_16BIT|MAP_AUTOSZ))) {
++	if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) {
+ 		csr |= AT91_SMC_DBW_8;
+ 		pr_debug("%s: 8bit i/o bus\n", driver_name);
+ 	} else {
+ 		csr |= AT91_SMC_DBW_16;
+ 		pr_debug("%s: 16bit i/o bus\n", driver_name);
+ 	}
+-	at91_sys_write(AT91_SMC_CSR(4), csr);
++	at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr);
+ 
+ 	io->start = cf->socket.io_offset;
+ 	io->stop = io->start + SZ_2K - 1;
+@@ -194,11 +196,11 @@
+ 
+ 	cf = container_of(s, struct at91_cf_socket, socket);
+ 
+-	map->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT;
++	map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT);
+ 	if (map->flags & MAP_ATTRIB)
+-		map->static_start = CF_ATTR_PHYS;
++		map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS;
+ 	else
+-		map->static_start = CF_MEM_PHYS;
++		map->static_start = cf->phys_baseaddr + CF_MEM_PHYS;
+ 
+ 	return 0;
+ }
+@@ -219,7 +221,6 @@
+ 	struct at91_cf_socket	*cf;
+ 	struct at91_cf_data	*board = pdev->dev.platform_data;
+ 	struct resource		*io;
+-	unsigned int		csa;
+ 	int			status;
+ 
+ 	if (!board || !board->det_pin || !board->rst_pin)
+@@ -235,33 +236,11 @@
+ 
+ 	cf->board = board;
+ 	cf->pdev = pdev;
++	cf->phys_baseaddr = io->start;
+ 	platform_set_drvdata(pdev, cf);
+ 
+-	/* CF takes over CS4, CS5, CS6 */
+-	csa = at91_sys_read(AT91_EBI_CSA);
+-	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+-
+-	/* nWAIT is _not_ a default setting */
+-	(void) at91_set_A_periph(AT91_PIN_PC6, 1);	/*  nWAIT */
+-
+-	/*
+-	 * Static memory controller timing adjustments.
+-	 * REVISIT:  these timings are in terms of MCK cycles, so
+-	 * when MCK changes (cpufreq etc) so must these values...
+-	 */
+-	at91_sys_write(AT91_SMC_CSR(4),
+-				  AT91_SMC_ACSS_STD
+-				| AT91_SMC_DBW_16
+-				| AT91_SMC_BAT
+-				| AT91_SMC_WSEN
+-				| AT91_SMC_NWS_(32)	/* wait states */
+-				| AT91_SMC_RWSETUP_(6)	/* setup time */
+-				| AT91_SMC_RWHOLD_(4)	/* hold time */
+-	);
+-
+ 	/* must be a GPIO; ergo must trigger on both edges */
+-	status = request_irq(board->det_pin, at91_cf_irq,
+-			IRQF_SAMPLE_RANDOM, driver_name, cf);
++	status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf);
+ 	if (status < 0)
+ 		goto fail0;
+ 	device_init_wakeup(&pdev->dev, 1);
+@@ -282,14 +261,18 @@
+ 		cf->socket.pci_irq = NR_IRQS + 1;
+ 
+ 	/* pcmcia layer only remaps "real" memory not iospace */
+-	cf->socket.io_offset = (unsigned long) ioremap(CF_IO_PHYS, SZ_2K);
+-	if (!cf->socket.io_offset)
++	cf->socket.io_offset = (unsigned long) ioremap(cf->phys_baseaddr + CF_IO_PHYS, SZ_2K);
++	if (!cf->socket.io_offset) {
++		status = -ENXIO;
+ 		goto fail1;
++	}
+ 
+-	/* reserve CS4, CS5, and CS6 regions; but use just CS4 */
++	/* reserve chip-select regions */
+ 	if (!request_mem_region(io->start, io->end + 1 - io->start,
+-				driver_name))
++				driver_name)) {
++		status = -ENXIO;
+ 		goto fail1;
++	}
+ 
+ 	pr_info("%s: irqs det #%d, io #%d\n", driver_name,
+ 		board->det_pin, board->irq_pin);
+@@ -319,9 +302,7 @@
+ fail0a:
+ 	device_init_wakeup(&pdev->dev, 0);
+ 	free_irq(board->det_pin, cf);
+-	device_init_wakeup(&pdev->dev, 0);
+ fail0:
+-	at91_sys_write(AT91_EBI_CSA, csa);
+ 	kfree(cf);
+ 	return status;
+ }
+@@ -331,19 +312,15 @@
+ 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
+ 	struct at91_cf_data	*board = cf->board;
+ 	struct resource		*io = cf->socket.io[0].res;
+-	unsigned int		csa;
+ 
+ 	pcmcia_unregister_socket(&cf->socket);
+ 	if (board->irq_pin)
+ 		free_irq(board->irq_pin, cf);
+-	free_irq(board->det_pin, cf);
+ 	device_init_wakeup(&pdev->dev, 0);
++	free_irq(board->det_pin, cf);
+ 	iounmap((void __iomem *) cf->socket.io_offset);
+ 	release_mem_region(io->start, io->end + 1 - io->start);
+ 
+-	csa = at91_sys_read(AT91_EBI_CSA);
+-	at91_sys_write(AT91_EBI_CSA, csa & ~AT91_EBI_CS4A);
+-
+ 	kfree(cf);
+ 	return 0;
+ }
+diff -urN -x CVS linux-2.6.19-final/drivers/rtc/Kconfig linux-2.6.19/drivers/rtc/Kconfig
+--- linux-2.6.19-final/drivers/rtc/Kconfig	Mon Dec  4 16:40:27 2006
++++ linux-2.6.19/drivers/rtc/Kconfig	Thu Oct 12 17:07:39 2006
+@@ -280,7 +280,7 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called rtc-pl031.
+ 
+-config RTC_DRV_AT91
++config RTC_DRV_AT91RM9200
+ 	tristate "AT91RM9200"
+ 	depends on RTC_CLASS && ARCH_AT91RM9200
+ 	help
+diff -urN -x CVS linux-2.6.19-final/drivers/rtc/Makefile linux-2.6.19/drivers/rtc/Makefile
+--- linux-2.6.19-final/drivers/rtc/Makefile	Mon Dec  4 16:40:27 2006
++++ linux-2.6.19/drivers/rtc/Makefile	Fri Oct 13 10:49:07 2006
+@@ -34,5 +34,5 @@
+ obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
+ obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
+ obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
+-obj-$(CONFIG_RTC_DRV_AT91)	+= rtc-at91.o
++obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
+ obj-$(CONFIG_RTC_DRV_SH)	+= rtc-sh.o
+diff -urN -x CVS linux-2.6.19-final/drivers/rtc/rtc-at91.c linux-2.6.19/drivers/rtc/rtc-at91.c
+--- linux-2.6.19-final/drivers/rtc/rtc-at91.c	Mon Dec  4 16:40:27 2006
++++ linux-2.6.19/drivers/rtc/rtc-at91.c	Thu Jan  1 02:00:00 1970
+@@ -1,429 +0,0 @@
+-/*
+- *	Real Time Clock interface for Linux on Atmel AT91RM9200
+- *
+- *	Copyright (C) 2002 Rick Bronson
+- *
+- *	Converted to RTC class model by Andrew Victor
+- *
+- *	Ported to Linux 2.6 by Steven Scholz
+- *	Based on s3c2410-rtc.c Simtec Electronics
+- *
+- *	Based on sa1100-rtc.c by Nils Faerber
+- *	Based on rtc.c by Paul Gortmaker
+- *
+- *	This program is free software; you can redistribute it and/or
+- *	modify it under the terms of the GNU General Public License
+- *	as published by the Free Software Foundation; either version
+- *	2 of the License, or (at your option) any later version.
+- *
+- */
+-
+-#include <linux/module.h>
+-#include <linux/kernel.h>
+-#include <linux/platform_device.h>
+-#include <linux/time.h>
+-#include <linux/rtc.h>
+-#include <linux/bcd.h>
+-#include <linux/interrupt.h>
+-#include <linux/ioctl.h>
+-#include <linux/completion.h>
+-
+-#include <asm/uaccess.h>
+-#include <asm/rtc.h>
+-
+-#include <asm/mach/time.h>
+-
+-
+-#define AT91_RTC_FREQ		1
+-#define AT91_RTC_EPOCH		1900UL	/* just like arch/arm/common/rtctime.c */
+-
+-static DECLARE_COMPLETION(at91_rtc_updated);
+-static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
+-
+-/*
+- * Decode time/date into rtc_time structure
+- */
+-static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
+-				struct rtc_time *tm)
+-{
+-	unsigned int time, date;
+-
+-	/* must read twice in case it changes */
+-	do {
+-		time = at91_sys_read(timereg);
+-		date = at91_sys_read(calreg);
+-	} while ((time != at91_sys_read(timereg)) ||
+-			(date != at91_sys_read(calreg)));
+-
+-	tm->tm_sec  = BCD2BIN((time & AT91_RTC_SEC) >> 0);
+-	tm->tm_min  = BCD2BIN((time & AT91_RTC_MIN) >> 8);
+-	tm->tm_hour = BCD2BIN((time & AT91_RTC_HOUR) >> 16);
+-
+-	/*
+-	 * The Calendar Alarm register does not have a field for
+-	 * the year - so these will return an invalid value.  When an
+-	 * alarm is set, at91_alarm_year wille store the current year.
+-	 */
+-	tm->tm_year  = BCD2BIN(date & AT91_RTC_CENT) * 100;	/* century */
+-	tm->tm_year += BCD2BIN((date & AT91_RTC_YEAR) >> 8);	/* year */
+-
+-	tm->tm_wday = BCD2BIN((date & AT91_RTC_DAY) >> 21) - 1;	/* day of the week [0-6], Sunday=0 */
+-	tm->tm_mon  = BCD2BIN((date & AT91_RTC_MONTH) >> 16) - 1;
+-	tm->tm_mday = BCD2BIN((date & AT91_RTC_DATE) >> 24);
+-}
+-
+-/*
+- * Read current time and date in RTC
+- */
+-static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
+-{
+-	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, tm);
+-	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+-	tm->tm_year = tm->tm_year - 1900;
+-
+-	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
+-		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+-		tm->tm_hour, tm->tm_min, tm->tm_sec);
+-
+-	return 0;
+-}
+-
+-/*
+- * Set current time and date in RTC
+- */
+-static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
+-{
+-	unsigned long cr;
+-
+-	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
+-		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+-		tm->tm_hour, tm->tm_min, tm->tm_sec);
+-
+-	/* Stop Time/Calendar from counting */
+-	cr = at91_sys_read(AT91_RTC_CR);
+-	at91_sys_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
+-
+-	at91_sys_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
+-	wait_for_completion(&at91_rtc_updated);	/* wait for ACKUPD interrupt */
+-	at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
+-
+-	at91_sys_write(AT91_RTC_TIMR,
+-			  BIN2BCD(tm->tm_sec) << 0
+-			| BIN2BCD(tm->tm_min) << 8
+-			| BIN2BCD(tm->tm_hour) << 16);
+-
+-	at91_sys_write(AT91_RTC_CALR,
+-			  BIN2BCD((tm->tm_year + 1900) / 100)	/* century */
+-			| BIN2BCD(tm->tm_year % 100) << 8	/* year */
+-			| BIN2BCD(tm->tm_mon + 1) << 16		/* tm_mon starts at zero */
+-			| BIN2BCD(tm->tm_wday + 1) << 21	/* day of the week [0-6], Sunday=0 */
+-			| BIN2BCD(tm->tm_mday) << 24);
+-
+-	/* Restart Time/Calendar */
+-	cr = at91_sys_read(AT91_RTC_CR);
+-	at91_sys_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM));
+-
+-	return 0;
+-}
+-
+-/*
+- * Read alarm time and date in RTC
+- */
+-static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+-{
+-	struct rtc_time *tm = &alrm->time;
+-
+-	at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm);
+-	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+-	tm->tm_year = at91_alarm_year - 1900;
+-
+-	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
+-		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+-		tm->tm_hour, tm->tm_min, tm->tm_sec);
+-
+-	return 0;
+-}
+-
+-/*
+- * Set alarm time and date in RTC
+- */
+-static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+-{
+-	struct rtc_time tm;
+-
+-	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, &tm);
+-
+-	at91_alarm_year = tm.tm_year;
+-
+-	tm.tm_hour = alrm->time.tm_hour;
+-	tm.tm_min = alrm->time.tm_min;
+-	tm.tm_sec = alrm->time.tm_sec;
+-
+-	at91_sys_write(AT91_RTC_TIMALR,
+-		  BIN2BCD(tm.tm_sec) << 0
+-		| BIN2BCD(tm.tm_min) << 8
+-		| BIN2BCD(tm.tm_hour) << 16
+-		| AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN);
+-	at91_sys_write(AT91_RTC_CALALR,
+-		  BIN2BCD(tm.tm_mon + 1) << 16		/* tm_mon starts at zero */
+-		| BIN2BCD(tm.tm_mday) << 24
+-		| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
+-
+-	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
+-		at91_alarm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour,
+-		tm.tm_min, tm.tm_sec);
+-
+-	return 0;
+-}
+-
+-/*
+- * Handle commands from user-space
+- */
+-static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
+-			unsigned long arg)
+-{
+-	int ret = 0;
+-
+-	pr_debug("%s(): cmd=%08x, arg=%08lx.\n", __FUNCTION__, cmd, arg);
+-
+-	switch (cmd) {
+-	case RTC_AIE_OFF:	/* alarm off */
+-		at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM);
+-		break;
+-	case RTC_AIE_ON:	/* alarm on */
+-		at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
+-		break;
+-	case RTC_UIE_OFF:	/* update off */
+-	case RTC_PIE_OFF:	/* periodic off */
+-		at91_sys_write(AT91_RTC_IDR, AT91_RTC_SECEV);
+-		break;
+-	case RTC_UIE_ON:	/* update on */
+-	case RTC_PIE_ON:	/* periodic on */
+-		at91_sys_write(AT91_RTC_IER, AT91_RTC_SECEV);
+-		break;
+-	case RTC_IRQP_READ:	/* read periodic alarm frequency */
+-		ret = put_user(AT91_RTC_FREQ, (unsigned long *) arg);
+-		break;
+-	case RTC_IRQP_SET:	/* set periodic alarm frequency */
+-		if (arg != AT91_RTC_FREQ)
+-			ret = -EINVAL;
+-		break;
+-	default:
+-		ret = -ENOIOCTLCMD;
+-		break;
+-	}
+-
+-	return ret;
+-}
+-
+-/*
+- * Provide additional RTC information in /proc/driver/rtc
+- */
+-static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
+-{
+-	unsigned long imr = at91_sys_read(AT91_RTC_IMR);
+-
+-	seq_printf(seq, "alarm_IRQ\t: %s\n",
+-			(imr & AT91_RTC_ALARM) ? "yes" : "no");
+-	seq_printf(seq, "update_IRQ\t: %s\n",
+-			(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
+-	seq_printf(seq, "periodic_IRQ\t: %s\n",
+-			(imr & AT91_RTC_SECEV) ? "yes" : "no");
+-	seq_printf(seq, "periodic_freq\t: %ld\n",
+-			(unsigned long) AT91_RTC_FREQ);
+-
+-	return 0;
+-}
+-
+-/*
+- * IRQ handler for the RTC
+- */
+-static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
+-{
+-	struct platform_device *pdev = dev_id;
+-	struct rtc_device *rtc = platform_get_drvdata(pdev);
+-	unsigned int rtsr;
+-	unsigned long events = 0;
+-
+-	rtsr = at91_sys_read(AT91_RTC_SR) & at91_sys_read(AT91_RTC_IMR);
+-	if (rtsr) {		/* this interrupt is shared!  Is it ours? */
+-		if (rtsr & AT91_RTC_ALARM)
+-			events |= (RTC_AF | RTC_IRQF);
+-		if (rtsr & AT91_RTC_SECEV)
+-			events |= (RTC_UF | RTC_IRQF);
+-		if (rtsr & AT91_RTC_ACKUPD)
+-			complete(&at91_rtc_updated);
+-
+-		at91_sys_write(AT91_RTC_SCCR, rtsr);	/* clear status reg */
+-
+-		rtc_update_irq(&rtc->class_dev, 1, events);
+-
+-		pr_debug("%s(): num=%ld, events=0x%02lx\n", __FUNCTION__,
+-			events >> 8, events & 0x000000FF);
+-
+-		return IRQ_HANDLED;
+-	}
+-	return IRQ_NONE;		/* not handled */
+-}
+-
+-static const struct rtc_class_ops at91_rtc_ops = {
+-	.ioctl		= at91_rtc_ioctl,
+-	.read_time	= at91_rtc_readtime,
+-	.set_time	= at91_rtc_settime,
+-	.read_alarm	= at91_rtc_readalarm,
+-	.set_alarm	= at91_rtc_setalarm,
+-	.proc		= at91_rtc_proc,
+-};
+-
+-/*
+- * Initialize and install RTC driver
+- */
+-static int __init at91_rtc_probe(struct platform_device *pdev)
+-{
+-	struct rtc_device *rtc;
+-	int ret;
+-
+-	at91_sys_write(AT91_RTC_CR, 0);
+-	at91_sys_write(AT91_RTC_MR, 0);		/* 24 hour mode */
+-
+-	/* Disable all interrupts */
+-	at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+-					AT91_RTC_SECEV | AT91_RTC_TIMEV |
+-					AT91_RTC_CALEV);
+-
+-	ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
+-				IRQF_DISABLED | IRQF_SHARED,
+-				"at91_rtc", pdev);
+-	if (ret) {
+-		printk(KERN_ERR "at91_rtc: IRQ %d already in use.\n",
+-				AT91_ID_SYS);
+-		return ret;
+-	}
+-
+-	rtc = rtc_device_register(pdev->name, &pdev->dev,
+-				&at91_rtc_ops, THIS_MODULE);
+-	if (IS_ERR(rtc)) {
+-		free_irq(AT91_ID_SYS, pdev);
+-		return PTR_ERR(rtc);
+-	}
+-	platform_set_drvdata(pdev, rtc);
+-	device_init_wakeup(&pdev->dev, 1);
+-
+-	printk(KERN_INFO "AT91 Real Time Clock driver.\n");
+-	return 0;
+-}
+-
+-/*
+- * Disable and remove the RTC driver
+- */
+-static int __devexit at91_rtc_remove(struct platform_device *pdev)
+-{
+-	struct rtc_device *rtc = platform_get_drvdata(pdev);
+-
+-	/* Disable all interrupts */
+-	at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+-					AT91_RTC_SECEV | AT91_RTC_TIMEV |
+-					AT91_RTC_CALEV);
+-	free_irq(AT91_ID_SYS, pdev);
+-
+-	rtc_device_unregister(rtc);
+-	platform_set_drvdata(pdev, NULL);
+-	device_init_wakeup(&pdev->dev, 0);
+-
+-	return 0;
+-}
+-
+-#ifdef CONFIG_PM
+-
+-/* AT91RM9200 RTC Power management control */
+-
+-static struct timespec at91_rtc_delta;
+-static u32 at91_rtc_imr;
+-
+-static int at91_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+-{
+-	struct rtc_time tm;
+-	struct timespec time;
+-
+-	time.tv_nsec = 0;
+-
+-	/* calculate time delta for suspend */
+-	at91_rtc_readtime(&pdev->dev, &tm);
+-	rtc_tm_to_time(&tm, &time.tv_sec);
+-	save_time_delta(&at91_rtc_delta, &time);
+-
+-	/* this IRQ is shared with DBGU and other hardware which isn't
+-	 * necessarily doing PM like we are...
+-	 */
+-	at91_rtc_imr = at91_sys_read(AT91_RTC_IMR)
+-			& (AT91_RTC_ALARM|AT91_RTC_SECEV);
+-	if (at91_rtc_imr) {
+-		if (device_may_wakeup(&pdev->dev))
+-			enable_irq_wake(AT91_ID_SYS);
+-		else
+-			at91_sys_write(AT91_RTC_IDR, at91_rtc_imr);
+-	}
+-
+-	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
+-		1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
+-		tm.tm_hour, tm.tm_min, tm.tm_sec);
+-
+-	return 0;
+-}
+-
+-static int at91_rtc_resume(struct platform_device *pdev)
+-{
+-	struct rtc_time tm;
+-	struct timespec time;
+-
+-	time.tv_nsec = 0;
+-
+-	at91_rtc_readtime(&pdev->dev, &tm);
+-	rtc_tm_to_time(&tm, &time.tv_sec);
+-	restore_time_delta(&at91_rtc_delta, &time);
+-
+-	if (at91_rtc_imr) {
+-		if (device_may_wakeup(&pdev->dev))
+-			disable_irq_wake(AT91_ID_SYS);
+-		else
+-			at91_sys_write(AT91_RTC_IER, at91_rtc_imr);
+-	}
+-
+-	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
+-		1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
+-		tm.tm_hour, tm.tm_min, tm.tm_sec);
+-
+-	return 0;
+-}
+-#else
+-#define at91_rtc_suspend NULL
+-#define at91_rtc_resume  NULL
+-#endif
+-
+-static struct platform_driver at91_rtc_driver = {
+-	.probe		= at91_rtc_probe,
+-	.remove		= at91_rtc_remove,
+-	.suspend	= at91_rtc_suspend,
+-	.resume		= at91_rtc_resume,
+-	.driver		= {
+-		.name	= "at91_rtc",
+-		.owner	= THIS_MODULE,
+-	},
+-};
+-
+-static int __init at91_rtc_init(void)
+-{
+-	return platform_driver_register(&at91_rtc_driver);
+-}
+-
+-static void __exit at91_rtc_exit(void)
+-{
+-	platform_driver_unregister(&at91_rtc_driver);
+-}
+-
+-module_init(at91_rtc_init);
+-module_exit(at91_rtc_exit);
+-
+-MODULE_AUTHOR("Rick Bronson");
+-MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200");
+-MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.19-final/drivers/rtc/rtc-at91rm9200.c linux-2.6.19/drivers/rtc/rtc-at91rm9200.c
+--- linux-2.6.19-final/drivers/rtc/rtc-at91rm9200.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/rtc/rtc-at91rm9200.c	Thu Nov 30 09:08:25 2006
+@@ -0,0 +1,430 @@
++/*
++ *	Real Time Clock interface for Linux on Atmel AT91RM9200
++ *
++ *	Copyright (C) 2002 Rick Bronson
++ *
++ *	Converted to RTC class model by Andrew Victor
++ *
++ *	Ported to Linux 2.6 by Steven Scholz
++ *	Based on s3c2410-rtc.c Simtec Electronics
++ *
++ *	Based on sa1100-rtc.c by Nils Faerber
++ *	Based on rtc.c by Paul Gortmaker
++ *
++ *	This program is free software; you can redistribute it and/or
++ *	modify it under the terms of the GNU General Public License
++ *	as published by the Free Software Foundation; either version
++ *	2 of the License, or (at your option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/time.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++#include <linux/interrupt.h>
++#include <linux/ioctl.h>
++#include <linux/completion.h>
++
++#include <asm/uaccess.h>
++#include <asm/rtc.h>
++
++#include <asm/mach/time.h>
++#include <asm/arch/at91_rtc.h>
++
++
++#define AT91_RTC_FREQ		1
++#define AT91_RTC_EPOCH		1900UL	/* just like arch/arm/common/rtctime.c */
++
++static DECLARE_COMPLETION(at91_rtc_updated);
++static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
++
++/*
++ * Decode time/date into rtc_time structure
++ */
++static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
++				struct rtc_time *tm)
++{
++	unsigned int time, date;
++
++	/* must read twice in case it changes */
++	do {
++		time = at91_sys_read(timereg);
++		date = at91_sys_read(calreg);
++	} while ((time != at91_sys_read(timereg)) ||
++			(date != at91_sys_read(calreg)));
++
++	tm->tm_sec  = BCD2BIN((time & AT91_RTC_SEC) >> 0);
++	tm->tm_min  = BCD2BIN((time & AT91_RTC_MIN) >> 8);
++	tm->tm_hour = BCD2BIN((time & AT91_RTC_HOUR) >> 16);
++
++	/*
++	 * The Calendar Alarm register does not have a field for
++	 * the year - so these will return an invalid value.  When an
++	 * alarm is set, at91_alarm_year wille store the current year.
++	 */
++	tm->tm_year  = BCD2BIN(date & AT91_RTC_CENT) * 100;	/* century */
++	tm->tm_year += BCD2BIN((date & AT91_RTC_YEAR) >> 8);	/* year */
++
++	tm->tm_wday = BCD2BIN((date & AT91_RTC_DAY) >> 21) - 1;	/* day of the week [0-6], Sunday=0 */
++	tm->tm_mon  = BCD2BIN((date & AT91_RTC_MONTH) >> 16) - 1;
++	tm->tm_mday = BCD2BIN((date & AT91_RTC_DATE) >> 24);
++}
++
++/*
++ * Read current time and date in RTC
++ */
++static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
++{
++	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, tm);
++	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
++	tm->tm_year = tm->tm_year - 1900;
++
++	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
++		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
++		tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++	return 0;
++}
++
++/*
++ * Set current time and date in RTC
++ */
++static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
++{
++	unsigned long cr;
++
++	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
++		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
++		tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++	/* Stop Time/Calendar from counting */
++	cr = at91_sys_read(AT91_RTC_CR);
++	at91_sys_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
++
++	at91_sys_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
++	wait_for_completion(&at91_rtc_updated);	/* wait for ACKUPD interrupt */
++	at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
++
++	at91_sys_write(AT91_RTC_TIMR,
++			  BIN2BCD(tm->tm_sec) << 0
++			| BIN2BCD(tm->tm_min) << 8
++			| BIN2BCD(tm->tm_hour) << 16);
++
++	at91_sys_write(AT91_RTC_CALR,
++			  BIN2BCD((tm->tm_year + 1900) / 100)	/* century */
++			| BIN2BCD(tm->tm_year % 100) << 8	/* year */
++			| BIN2BCD(tm->tm_mon + 1) << 16		/* tm_mon starts at zero */
++			| BIN2BCD(tm->tm_wday + 1) << 21	/* day of the week [0-6], Sunday=0 */
++			| BIN2BCD(tm->tm_mday) << 24);
++
++	/* Restart Time/Calendar */
++	cr = at91_sys_read(AT91_RTC_CR);
++	at91_sys_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM));
++
++	return 0;
++}
++
++/*
++ * Read alarm time and date in RTC
++ */
++static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++	struct rtc_time *tm = &alrm->time;
++
++	at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm);
++	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
++	tm->tm_year = at91_alarm_year - 1900;
++
++	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
++		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
++		tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++	return 0;
++}
++
++/*
++ * Set alarm time and date in RTC
++ */
++static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++	struct rtc_time tm;
++
++	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, &tm);
++
++	at91_alarm_year = tm.tm_year;
++
++	tm.tm_hour = alrm->time.tm_hour;
++	tm.tm_min = alrm->time.tm_min;
++	tm.tm_sec = alrm->time.tm_sec;
++
++	at91_sys_write(AT91_RTC_TIMALR,
++		  BIN2BCD(tm.tm_sec) << 0
++		| BIN2BCD(tm.tm_min) << 8
++		| BIN2BCD(tm.tm_hour) << 16
++		| AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN);
++	at91_sys_write(AT91_RTC_CALALR,
++		  BIN2BCD(tm.tm_mon + 1) << 16		/* tm_mon starts at zero */
++		| BIN2BCD(tm.tm_mday) << 24
++		| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
++
++	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
++		at91_alarm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour,
++		tm.tm_min, tm.tm_sec);
++
++	return 0;
++}
++
++/*
++ * Handle commands from user-space
++ */
++static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
++			unsigned long arg)
++{
++	int ret = 0;
++
++	pr_debug("%s(): cmd=%08x, arg=%08lx.\n", __FUNCTION__, cmd, arg);
++
++	switch (cmd) {
++	case RTC_AIE_OFF:	/* alarm off */
++		at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM);
++		break;
++	case RTC_AIE_ON:	/* alarm on */
++		at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
++		break;
++	case RTC_UIE_OFF:	/* update off */
++	case RTC_PIE_OFF:	/* periodic off */
++		at91_sys_write(AT91_RTC_IDR, AT91_RTC_SECEV);
++		break;
++	case RTC_UIE_ON:	/* update on */
++	case RTC_PIE_ON:	/* periodic on */
++		at91_sys_write(AT91_RTC_IER, AT91_RTC_SECEV);
++		break;
++	case RTC_IRQP_READ:	/* read periodic alarm frequency */
++		ret = put_user(AT91_RTC_FREQ, (unsigned long *) arg);
++		break;
++	case RTC_IRQP_SET:	/* set periodic alarm frequency */
++		if (arg != AT91_RTC_FREQ)
++			ret = -EINVAL;
++		break;
++	default:
++		ret = -ENOIOCTLCMD;
++		break;
++	}
++
++	return ret;
++}
++
++/*
++ * Provide additional RTC information in /proc/driver/rtc
++ */
++static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
++{
++	unsigned long imr = at91_sys_read(AT91_RTC_IMR);
++
++	seq_printf(seq, "alarm_IRQ\t: %s\n",
++			(imr & AT91_RTC_ALARM) ? "yes" : "no");
++	seq_printf(seq, "update_IRQ\t: %s\n",
++			(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
++	seq_printf(seq, "periodic_IRQ\t: %s\n",
++			(imr & AT91_RTC_SECEV) ? "yes" : "no");
++	seq_printf(seq, "periodic_freq\t: %ld\n",
++			(unsigned long) AT91_RTC_FREQ);
++
++	return 0;
++}
++
++/*
++ * IRQ handler for the RTC
++ */
++static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
++{
++	struct platform_device *pdev = dev_id;
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++	unsigned int rtsr;
++	unsigned long events = 0;
++
++	rtsr = at91_sys_read(AT91_RTC_SR) & at91_sys_read(AT91_RTC_IMR);
++	if (rtsr) {		/* this interrupt is shared!  Is it ours? */
++		if (rtsr & AT91_RTC_ALARM)
++			events |= (RTC_AF | RTC_IRQF);
++		if (rtsr & AT91_RTC_SECEV)
++			events |= (RTC_UF | RTC_IRQF);
++		if (rtsr & AT91_RTC_ACKUPD)
++			complete(&at91_rtc_updated);
++
++		at91_sys_write(AT91_RTC_SCCR, rtsr);	/* clear status reg */
++
++		rtc_update_irq(&rtc->class_dev, 1, events);
++
++		pr_debug("%s(): num=%ld, events=0x%02lx\n", __FUNCTION__,
++			events >> 8, events & 0x000000FF);
++
++		return IRQ_HANDLED;
++	}
++	return IRQ_NONE;		/* not handled */
++}
++
++static const struct rtc_class_ops at91_rtc_ops = {
++	.ioctl		= at91_rtc_ioctl,
++	.read_time	= at91_rtc_readtime,
++	.set_time	= at91_rtc_settime,
++	.read_alarm	= at91_rtc_readalarm,
++	.set_alarm	= at91_rtc_setalarm,
++	.proc		= at91_rtc_proc,
++};
++
++/*
++ * Initialize and install RTC driver
++ */
++static int __init at91_rtc_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	int ret;
++
++	at91_sys_write(AT91_RTC_CR, 0);
++	at91_sys_write(AT91_RTC_MR, 0);		/* 24 hour mode */
++
++	/* Disable all interrupts */
++	at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
++					AT91_RTC_SECEV | AT91_RTC_TIMEV |
++					AT91_RTC_CALEV);
++
++	ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
++				IRQF_DISABLED | IRQF_SHARED,
++				"at91_rtc", pdev);
++	if (ret) {
++		printk(KERN_ERR "at91_rtc: IRQ %d already in use.\n",
++				AT91_ID_SYS);
++		return ret;
++	}
++
++	rtc = rtc_device_register(pdev->name, &pdev->dev,
++				&at91_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		free_irq(AT91_ID_SYS, pdev);
++		return PTR_ERR(rtc);
++	}
++	platform_set_drvdata(pdev, rtc);
++	device_init_wakeup(&pdev->dev, 1);
++
++	printk(KERN_INFO "AT91 Real Time Clock driver.\n");
++	return 0;
++}
++
++/*
++ * Disable and remove the RTC driver
++ */
++static int __devexit at91_rtc_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	/* Disable all interrupts */
++	at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
++					AT91_RTC_SECEV | AT91_RTC_TIMEV |
++					AT91_RTC_CALEV);
++	free_irq(AT91_ID_SYS, pdev);
++
++	rtc_device_unregister(rtc);
++	platform_set_drvdata(pdev, NULL);
++	device_init_wakeup(&pdev->dev, 0);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++
++/* AT91RM9200 RTC Power management control */
++
++static struct timespec at91_rtc_delta;
++static u32 at91_rtc_imr;
++
++static int at91_rtc_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct rtc_time tm;
++	struct timespec time;
++
++	time.tv_nsec = 0;
++
++	/* calculate time delta for suspend */
++	at91_rtc_readtime(&pdev->dev, &tm);
++	rtc_tm_to_time(&tm, &time.tv_sec);
++	save_time_delta(&at91_rtc_delta, &time);
++
++	/* this IRQ is shared with DBGU and other hardware which isn't
++	 * necessarily doing PM like we are...
++	 */
++	at91_rtc_imr = at91_sys_read(AT91_RTC_IMR)
++			& (AT91_RTC_ALARM|AT91_RTC_SECEV);
++	if (at91_rtc_imr) {
++		if (device_may_wakeup(&pdev->dev))
++			enable_irq_wake(AT91_ID_SYS);
++		else
++			at91_sys_write(AT91_RTC_IDR, at91_rtc_imr);
++	}
++
++	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
++		1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
++		tm.tm_hour, tm.tm_min, tm.tm_sec);
++
++	return 0;
++}
++
++static int at91_rtc_resume(struct platform_device *pdev)
++{
++	struct rtc_time tm;
++	struct timespec time;
++
++	time.tv_nsec = 0;
++
++	at91_rtc_readtime(&pdev->dev, &tm);
++	rtc_tm_to_time(&tm, &time.tv_sec);
++	restore_time_delta(&at91_rtc_delta, &time);
++
++	if (at91_rtc_imr) {
++		if (device_may_wakeup(&pdev->dev))
++			disable_irq_wake(AT91_ID_SYS);
++		else
++			at91_sys_write(AT91_RTC_IER, at91_rtc_imr);
++	}
++
++	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
++		1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
++		tm.tm_hour, tm.tm_min, tm.tm_sec);
++
++	return 0;
++}
++#else
++#define at91_rtc_suspend NULL
++#define at91_rtc_resume  NULL
++#endif
++
++static struct platform_driver at91_rtc_driver = {
++	.probe		= at91_rtc_probe,
++	.remove		= at91_rtc_remove,
++	.suspend	= at91_rtc_suspend,
++	.resume		= at91_rtc_resume,
++	.driver		= {
++		.name	= "at91_rtc",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91_rtc_init(void)
++{
++	return platform_driver_register(&at91_rtc_driver);
++}
++
++static void __exit at91_rtc_exit(void)
++{
++	platform_driver_unregister(&at91_rtc_driver);
++}
++
++module_init(at91_rtc_init);
++module_exit(at91_rtc_exit);
++
++MODULE_AUTHOR("Rick Bronson");
++MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.19-final/drivers/serial/atmel_serial.c linux-2.6.19/drivers/serial/atmel_serial.c
+--- linux-2.6.19-final/drivers/serial/atmel_serial.c	Mon Dec  4 16:40:48 2006
++++ linux-2.6.19/drivers/serial/atmel_serial.c	Fri Nov 10 09:17:31 2006
+@@ -1,5 +1,5 @@
+ /*
+- *  linux/drivers/char/at91_serial.c
++ *  linux/drivers/char/atmel_serial.c
+  *
+  *  Driver for Atmel AT91 / AT32 Serial ports
+  *  Copyright (C) 2003 Rick Bronson
+@@ -7,6 +7,8 @@
+  *  Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+  *
++ *  DMA support added by Chip Coldwell.
++ *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2 of the License, or
+@@ -33,19 +35,25 @@
+ #include <linux/sysrq.h>
+ #include <linux/tty_flip.h>
+ #include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
+ 
+ #include <asm/io.h>
+ 
+-#include <asm/arch/at91rm9200_pdc.h>
+ #include <asm/mach/serial_at91.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/at91_pdc.h>
+ #ifdef CONFIG_ARM
+-#include <asm/arch/system.h>
++#include <asm/arch/cpu.h>
+ #include <asm/arch/gpio.h>
+ #endif
+ 
+ #include "atmel_serial.h"
+ 
++#define SUPPORT_PDC  
++#define PDC_BUFFER_SIZE		(L1_CACHE_BYTES << 3)
++#warning "Revisit"
++#define PDC_RX_TIMEOUT		(3 * 10)		/* 3 bytes */
++
+ #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+ #define SUPPORT_SYSRQ
+ #endif
+@@ -89,23 +97,30 @@
+ // #define UART_GET_CR(port)	readl((port)->membase + ATMEL_US_CR)		// is write-only
+ 
+  /* PDC registers */
+-#define UART_PUT_PTCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_PTCR)
+-#define UART_GET_PTSR(port)	readl((port)->membase + ATMEL_PDC_PTSR)
++#define UART_PUT_PTCR(port,v)	writel(v, (port)->membase + AT91_PDC_PTCR)
++#define UART_GET_PTSR(port)	readl((port)->membase + AT91_PDC_PTSR)
+ 
+-#define UART_PUT_RPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RPR)
+-#define UART_GET_RPR(port)	readl((port)->membase + ATMEL_PDC_RPR)
+-#define UART_PUT_RCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RCR)
+-#define UART_PUT_RNPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RNPR)
+-#define UART_PUT_RNCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RNCR)
+-
+-#define UART_PUT_TPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TPR)
+-#define UART_PUT_TCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TCR)
+-//#define UART_PUT_TNPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TNPR)
+-//#define UART_PUT_TNCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TNCR)
++#define UART_PUT_RPR(port,v)	writel(v, (port)->membase + AT91_PDC_RPR)
++#define UART_GET_RPR(port)	readl((port)->membase + AT91_PDC_RPR)
++#define UART_PUT_RCR(port,v)	writel(v, (port)->membase + AT91_PDC_RCR)
++#define UART_PUT_RNPR(port,v)	writel(v, (port)->membase + AT91_PDC_RNPR)
++#define UART_PUT_RNCR(port,v)	writel(v, (port)->membase + AT91_PDC_RNCR)
++
++#define UART_PUT_TPR(port,v)	writel(v, (port)->membase + AT91_PDC_TPR)
++#define UART_PUT_TCR(port,v)	writel(v, (port)->membase + AT91_PDC_TCR)
++//#define UART_PUT_TNPR(port,v)	writel(v, (port)->membase + AT91_PDC_TNPR)
++//#define UART_PUT_TNCR(port,v)	writel(v, (port)->membase + AT91_PDC_TNCR)
+ 
+ static int (*atmel_open_hook)(struct uart_port *);
+ static void (*atmel_close_hook)(struct uart_port *);
+ 
++struct atmel_dma_buffer {
++	unsigned char	*buf;
++	dma_addr_t	dma_addr;
++	size_t		dma_size;
++	unsigned int	ofs;
++};
++
+ /*
+  * We wrap our port structure around the generic uart_port.
+  */
+@@ -113,10 +128,20 @@
+ 	struct uart_port	uart;		/* uart */
+ 	struct clk		*clk;		/* uart clock */
+ 	unsigned short		suspended;	/* is port suspended? */
++
++	short			use_dma_rx;	/* enable PDC receiver */
++	short			pdc_rx_idx;	/* current PDC RX buffer */
++	struct atmel_dma_buffer	pdc_rx[2];	/* PDC receier */
++
++	short			use_dma_tx;	/* enable PDC transmitter */
++	struct atmel_dma_buffer	pdc_tx;		/* PDC transmitter */
+ };
+ 
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+ 
++#define PDC_RX_BUF(port)	&(port)->pdc_rx[(port)->pdc_rx_idx]
++#define PDC_RX_SWITCH(port)	(port)->pdc_rx_idx = !(port)->pdc_rx_idx
++
+ #ifdef SUPPORT_SYSRQ
+ static struct console atmel_console;
+ #endif
+@@ -137,8 +162,8 @@
+ 	unsigned int control = 0;
+ 	unsigned int mode;
+ 
+-#ifdef CONFIG_ARM
+-	if (arch_identify() == ARCH_ID_AT91RM9200) {
++#ifdef CONFIG_ARCH_AT91RM9200
++	if (cpu_is_at91rm9200()) {
+ 		/*
+ 		 * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
+ 		 *  We need to drive the pin manually.
+@@ -204,7 +229,12 @@
+ {
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 
+-	UART_PUT_IDR(port, ATMEL_US_TXRDY);
++	if (atmel_port->use_dma_tx) {
++		UART_PUT_PTCR(port, AT91_PDC_TXTDIS);		/* disable PDC transmit */
++		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++	}
++	else
++		UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ }
+ 
+ /*
+@@ -214,7 +244,17 @@
+ {
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 
+-	UART_PUT_IER(port, ATMEL_US_TXRDY);
++	if (atmel_port->use_dma_tx) {
++		if (UART_GET_PTSR(port) & AT91_PDC_TXTEN)
++			/* The transmitter is already running.  Yes, we
++			   really need this.*/
++			return;
++
++		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++		UART_PUT_PTCR(port, AT91_PDC_TXTEN);		/* re-enable PDC transmit */
++	}
++	else
++		UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+ 
+ /*
+@@ -224,7 +264,12 @@
+ {
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 
+-	UART_PUT_IDR(port, ATMEL_US_RXRDY);
++	if (atmel_port->use_dma_rx) {
++		UART_PUT_PTCR(port, AT91_PDC_RXTDIS);		/* disable PDC receive */
++		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++	}
++	else
++		UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+ 
+ /*
+@@ -247,6 +292,134 @@
+ }
+ 
+ /*
++ * Receive data via the PDC.  A buffer has been fulled.
++ */
++static void at91_pdc_endrx(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct tty_struct *tty = port->info->tty;
++	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++	unsigned int count;
++
++	count = pdc->dma_size - pdc->ofs;
++	if (likely(count > 0)) {
++		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++		tty_flip_buffer_push(tty);
++
++		port->icount.rx += count;
++	}
++
++	/* Set this buffer as the next receive buffer */
++	pdc->ofs = 0;
++	UART_PUT_RNPR(port, pdc->dma_addr);
++	UART_PUT_RNCR(port, pdc->dma_size);
++
++	/* Switch to next buffer */
++	PDC_RX_SWITCH(atmel_port);		/* next PDC buffer */
++}
++
++/*
++ * Receive data via the PDC.  At least one byte was received, but the
++ * buffer was not full when the inter-character timeout expired.
++ */
++static void at91_pdc_timeout(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct tty_struct *tty = port->info->tty;
++	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++	/* unsigned */ int ofs, count;
++
++	ofs = UART_GET_RPR(port) - pdc->dma_addr;	/* current DMA adress */
++	count = ofs - pdc->ofs;
++
++	if (likely(count > 0)) {
++		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++		tty_flip_buffer_push(tty);
++
++		pdc->ofs = ofs;
++		port->icount.rx += count;
++	}
++
++	/* reset the UART timeout */
++	UART_PUT_CR(port, ATMEL_US_STTTO);
++}
++
++/*
++ * Deal with parity, framing and overrun errors.
++ */
++static void at91_pdc_rxerr(struct uart_port *port, unsigned int status)
++{
++	/* clear error */
++	UART_PUT_CR(port, ATMEL_US_RSTSTA);
++
++	if (status & ATMEL_US_RXBRK) {
++		status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
++		port->icount.brk++;
++	}
++	if (status & ATMEL_US_PARE)
++		port->icount.parity++;
++	if (status & ATMEL_US_FRAME)
++		port->icount.frame++;
++	if (status & ATMEL_US_OVRE)
++		port->icount.overrun++;
++}
++
++/*
++ * A transmission via the PDC is complete.
++ */
++static void at91_pdc_endtx(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct circ_buf *xmit = &port->info->xmit;
++	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++	xmit->tail += pdc->ofs;
++	if (xmit->tail >= SERIAL_XMIT_SIZE)
++		xmit->tail -= SERIAL_XMIT_SIZE;
++
++	port->icount.tx += pdc->ofs;
++	pdc->ofs = 0;
++
++	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++		uart_write_wakeup(port);
++}
++
++/*
++ * The PDC transmitter is idle, so either start the next transfer or
++ * disable the transmitter.
++ */
++static void at91_pdc_txbufe(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct circ_buf *xmit = &port->info->xmit;
++	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++	int count;
++
++	if (!uart_circ_empty(xmit)) {
++		/* more to transmit - setup next transfer */
++		UART_PUT_PTCR(port, AT91_PDC_TXTDIS);			/* disable PDC transmit */
++		dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++
++		if (xmit->tail < xmit->head)
++			count = xmit->head - xmit->tail;
++		else
++			count = SERIAL_XMIT_SIZE - xmit->tail;
++		pdc->ofs = count;
++
++		UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
++		UART_PUT_TCR(port, count);
++		UART_PUT_PTCR(port, AT91_PDC_TXTEN);			/* re-enable PDC transmit */
++	}
++	else {
++		/* nothing left to transmit - disable the transmitter */
++		UART_PUT_PTCR(port, AT91_PDC_TXTDIS);			/* disable PDC transmit */
++		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++	}
++}
++
++/*
+  * Characters received (called from interrupt handler)
+  */
+ static void atmel_rx_chars(struct uart_port *port)
+@@ -348,6 +521,14 @@
+ 	status = UART_GET_CSR(port);
+ 	pending = status & UART_GET_IMR(port);
+ 	while (pending) {
++		/* PDC receive */
++		if (pending & ATMEL_US_ENDRX)
++			at91_pdc_endrx(port);
++		if (pending & ATMEL_US_TIMEOUT)
++			at91_pdc_timeout(port);
++		if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
++			at91_pdc_rxerr(port, pending);
++
+ 		/* Interrupt receive */
+ 		if (pending & ATMEL_US_RXRDY)
+ 			atmel_rx_chars(port);
+@@ -362,6 +543,12 @@
+ 		if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
+ 			wake_up_interruptible(&port->info->delta_msr_wait);
+ 
++		/* PDC transmit */
++		if (pending & ATMEL_US_ENDTX)
++			at91_pdc_endtx(port);
++		if (pending & ATMEL_US_TXBUFE)
++			at91_pdc_txbufe(port);
++
+ 		/* Interrupt transmit */
+ 		if (pending & ATMEL_US_TXRDY)
+ 			atmel_tx_chars(port);
+@@ -399,6 +586,47 @@
+ 		return retval;
+ 	}
+ 
++ 	/*
++	 * Initialize DMA (if necessary)
++	 */
++	if (atmel_port->use_dma_rx) {
++		int i;
++
++		for (i = 0; i < 2; i++) {
++			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++			pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
++			if (pdc->buf == NULL) {
++				if (i != 0) {
++					dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++					kfree(atmel_port->pdc_rx[0].buf);
++				}
++				free_irq(port->irq, port);
++				return -ENOMEM;
++			}
++			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++			pdc->dma_size = PDC_BUFFER_SIZE;
++			pdc->ofs = 0;
++		}
++
++		atmel_port->pdc_rx_idx = 0;
++
++		UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
++		UART_PUT_RCR(port, PDC_BUFFER_SIZE);
++
++		UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
++		UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
++	}
++	if (atmel_port->use_dma_tx) {
++		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++		struct circ_buf *xmit = &port->info->xmit;
++
++		pdc->buf = xmit->buf;
++		pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
++		pdc->dma_size = SERIAL_XMIT_SIZE;
++		pdc->ofs = 0;
++	}
++
+ 	/*
+ 	 * If there is a specific "open" function (to register
+ 	 * control line interrupts)
+@@ -417,7 +645,15 @@
+ 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);		/* enable xmit & rcvr */
+ 
+-	UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
++	if (atmel_port->use_dma_rx) {
++		UART_PUT_RTOR(port, PDC_RX_TIMEOUT);		/* set UART timeout */
++		UART_PUT_CR(port, ATMEL_US_STTTO);
++
++		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++		UART_PUT_PTCR(port, AT91_PDC_RXTEN);		/* enable PDC controller */
++	}
++	else
++		UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
+ 
+ 	return 0;
+ }
+@@ -430,6 +666,25 @@
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 
+ 	/*
++	 * Shut-down the DMA.
++	 */
++	if (atmel_port->use_dma_rx) {
++		int i;
++
++		for (i = 0; i < 2; i++) {
++			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++			dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++			kfree(pdc->buf);
++		}
++	}
++	if (atmel_port->use_dma_tx) {
++		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++		dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++	}
++
++	/*
+ 	 * Disable all interrupts, port and break condition.
+ 	 */
+ 	UART_PUT_CR(port, ATMEL_US_RSTSTA);
+@@ -480,6 +735,7 @@
+  */
+ static void atmel_set_termios(struct uart_port *port, struct termios * termios, struct termios * old)
+ {
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 	unsigned long flags;
+ 	unsigned int mode, imr, quot, baud;
+ 
+@@ -533,6 +789,9 @@
+ 	if (termios->c_iflag & (BRKINT | PARMRK))
+ 		port->read_status_mask |= ATMEL_US_RXBRK;
+ 
++	if (atmel_port->use_dma_rx)	/* need to enable error interrupts */
++		UART_PUT_IER(port, port->read_status_mask);
++
+ 	/*
+ 	 * Characters to ignore
+ 	 */
+@@ -711,6 +970,11 @@
+ 		clk_enable(atmel_port->clk);
+ 		port->uartclk = clk_get_rate(atmel_port->clk);
+ 	}
++
++#ifdef SUPPORT_PDC
++	atmel_port->use_dma_rx = data->use_dma_rx;
++	atmel_port->use_dma_tx = data->use_dma_tx;
++#endif
+ }
+ 
+ /*
+diff -urN -x CVS linux-2.6.19-final/drivers/serial/atmel_serial.h linux-2.6.19/drivers/serial/atmel_serial.h
+--- linux-2.6.19-final/drivers/serial/atmel_serial.h	Mon Dec  4 16:40:48 2006
++++ linux-2.6.19/drivers/serial/atmel_serial.h	Wed Nov  8 12:29:58 2006
+@@ -31,8 +31,8 @@
+ #define		ATMEL_US_RSTIT		(1 << 13)		/* Reset Iterations */
+ #define		ATMEL_US_RSTNACK	(1 << 14)		/* Reset Non Acknowledge */
+ #define		ATMEL_US_RETTO		(1 << 15)		/* Rearm Time-out */
+-#define		ATMEL_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable */
+-#define		ATMEL_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable */
++#define		ATMEL_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable [AT91RM9200 only] */
++#define		ATMEL_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable [AT91RM9200 only] */
+ #define		ATMEL_US_RTSEN		(1 << 18)		/* Request To Send Enable */
+ #define		ATMEL_US_RTSDIS		(1 << 19)		/* Request To Send Disable */
+ 
+@@ -92,9 +92,9 @@
+ #define		ATMEL_US_TXBUFE		(1 << 11)		/* Transmission Buffer Empty */
+ #define		ATMEL_US_RXBUFF		(1 << 12)		/* Reception Buffer Full */
+ #define		ATMEL_US_NACK		(1 << 13)		/* Non Acknowledge */
+-#define		ATMEL_US_RIIC		(1 << 16)		/* Ring Indicator Input Change */
+-#define		ATMEL_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change */
+-#define		ATMEL_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change */
++#define		ATMEL_US_RIIC		(1 << 16)		/* Ring Indicator Input Change [AT91RM9200 only] */
++#define		ATMEL_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change [AT91RM9200 only] */
++#define		ATMEL_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change [AT91RM9200 only] */
+ #define		ATMEL_US_CTSIC		(1 << 19)		/* Clear to Send Input Change */
+ #define		ATMEL_US_RI		(1 << 20)		/* RI */
+ #define		ATMEL_US_DSR		(1 << 21)		/* DSR */
+@@ -106,6 +106,7 @@
+ #define ATMEL_US_CSR		0x14			/* Channel Status Register */
+ #define ATMEL_US_RHR		0x18			/* Receiver Holding Register */
+ #define ATMEL_US_THR		0x1c			/* Transmitter Holding Register */
++#define 	ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [AT91SAM9261 only] */
+ 
+ #define ATMEL_US_BRGR		0x20			/* Baud Rate Generator Register */
+ #define		ATMEL_US_CD		(0xffff << 0)		/* Clock Divider */
+diff -urN -x CVS linux-2.6.19-final/drivers/spi/Kconfig linux-2.6.19/drivers/spi/Kconfig
+--- linux-2.6.19-final/drivers/spi/Kconfig	Mon Dec  4 16:29:01 2006
++++ linux-2.6.19/drivers/spi/Kconfig	Wed Nov 15 14:54:04 2006
+@@ -51,6 +51,13 @@
+ comment "SPI Master Controller Drivers"
+ 	depends on SPI_MASTER
+ 
++config SPI_ATMEL
++	tristate "Atmel SPI Controller"
++	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
++	help
++	  This selects a driver for the Atmel SPI Controller, present on
++	  many AT32 (AVR32) and AT91 (ARM) chips.
++
+ config SPI_BITBANG
+ 	tristate "Bitbanging SPI master"
+ 	depends on SPI_MASTER && EXPERIMENTAL
+@@ -75,6 +82,25 @@
+ 	  inexpensive battery powered microcontroller evaluation board.
+ 	  This same cable can be used to flash new firmware.
+ 
++config SPI_AT91
++	tristate "AT91 SPI Master"
++	depends on SPI_MASTER && ARCH_AT91 && !SPI_ATMEL && EXPERIMENTAL
++	select SPI_BITBANG
++	select SPI_AT91_MANUAL_CS
++	help
++	  This is dumb PIO bitbanging driver for the Atmel
++	  AT91RM9200 and AT91SAM926x processors.
++	  (Someone should provide a drop-in replacemnt of this code,
++	  using the native SPI hardware and its DMA controller).
++
++config SPI_AT91_MANUAL_CS
++	bool
++	depends on ARCH_AT91RM9200
++	help
++	  Works around an AT91RM9200 problem whereby the SPI chip-select
++	  will be wrongly disabled.  The workaround uses those pins as  
++	  GPIOs instead of letting the SPI controller manage them.
++
+ config SPI_MPC83xx
+ 	tristate "Freescale MPC83xx SPI controller"
+ 	depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+diff -urN -x CVS linux-2.6.19-final/drivers/spi/Makefile linux-2.6.19/drivers/spi/Makefile
+--- linux-2.6.19-final/drivers/spi/Makefile	Mon Dec  4 16:29:01 2006
++++ linux-2.6.19/drivers/spi/Makefile	Wed Nov 15 14:54:35 2006
+@@ -17,6 +17,8 @@
+ obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
+ obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
++obj-$(CONFIG_SPI_AT91)			+= spi_at91_bitbang.o
++obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ # 	... add above this line ...
+ 
+ # SPI protocol drivers (device/link on bus)
+diff -urN -x CVS linux-2.6.19-final/drivers/spi/atmel_spi.c linux-2.6.19/drivers/spi/atmel_spi.c
+--- linux-2.6.19-final/drivers/spi/atmel_spi.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/spi/atmel_spi.c	Wed Nov 22 09:22:22 2006
+@@ -0,0 +1,684 @@
++/*
++ * Driver for Atmel AT32 and AT91 SPI Controllers
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91_pdc.h>
++
++#include "atmel_spi.h"
++
++#define spi_readl(port, reg)		__raw_readl((port)->regs + (reg))
++#define spi_writel(port, reg, value)	__raw_writel((value), (port)->regs + (reg))
++
++/*
++ * The core SPI transfer engine just talks to a register bank to set up
++ * DMA transfers; transfer queue progress is driven by IRQs.  The clock
++ * framework provides the base clock, subdivided for each spi_device.
++ *
++ * Newer controllers, marked with "new_1" flag, have:
++ *  - CR.LASTXFER
++ *  - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
++ *  - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
++ *  - SPI_CSRx.CSAAT
++ *  - SPI_CSRx.SBCR allows faster clocking
++ */
++struct atmel_spi {
++	spinlock_t		lock;
++
++	void __iomem		*regs;
++	int			irq;
++	struct clk		*clk;
++	struct platform_device	*pdev;
++	unsigned		new_1:1;
++
++	u8			stopping;
++	struct list_head	queue;
++	struct spi_transfer	*current_transfer;
++	unsigned long		remaining_bytes;
++
++	void			*buffer;
++	dma_addr_t		buffer_dma;
++};
++
++#define BUFFER_SIZE		PAGE_SIZE
++#define INVALID_DMA_ADDRESS	0xffffffff
++
++/*
++ * TODO: We really want to use the same GPIO API on both architectures.
++ */
++#ifdef	CONFIG_ARM
++
++static inline int request_gpio(unsigned int pin)
++{
++	return 0;
++}
++
++static inline void free_gpio(unsigned int pin)
++{
++
++}
++
++static inline void gpio_set_value(unsigned int pin, int value)
++{
++	at91_set_gpio_value(pin, value);
++}
++
++static inline void gpio_set_output_enable(unsigned int pin, int enabled)
++{
++	at91_set_gpio_output(pin, enabled);
++}
++
++static inline void gpio_set_pullup_enable(unsigned int pin, int enabled)
++{
++
++}
++#endif
++
++/*
++ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
++ * they assume that spi slave device state will not change on deselect, so
++ * that automagic deselection is OK.  Not so!  Workaround uses nCSx pins
++ * as GPIOs; or newer controllers have CSAAT and friends.
++ *
++ * Since the CSAAT functionality is a bit weird on newer controllers
++ * as well, we use GPIO to control nCSx pins on all controllers.
++ */
++
++static inline void cs_activate(struct spi_device *spi)
++{
++	unsigned gpio = (unsigned) spi->controller_data;
++
++	dev_dbg(&spi->dev, "activate %u\n", gpio);
++	gpio_set_value(gpio, 0);
++}
++
++static inline void cs_deactivate(struct spi_device *spi)
++{
++	unsigned gpio = (unsigned) spi->controller_data;
++
++	dev_dbg(&spi->dev, "DEactivate %u\n", gpio);
++	gpio_set_value(gpio, 1);
++}
++
++/*
++ * Submit next transfer for DMA.
++ * lock is held, spi irq is blocked
++ */
++static void atmel_spi_next_xfer(struct spi_master *master,
++				struct spi_message *msg)
++{
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++	struct spi_transfer	*xfer;
++	u32			imr = 0;
++	u32			len;
++	dma_addr_t		tx_dma, rx_dma;
++
++	xfer = as->current_transfer;
++	if (!xfer || as->remaining_bytes == 0) {
++		if (xfer)
++			xfer = list_entry(xfer->transfer_list.next,
++					  struct spi_transfer, transfer_list);
++		else
++			xfer = list_entry(msg->transfers.next, struct spi_transfer,
++					  transfer_list);
++		as->remaining_bytes = xfer->len;
++		as->current_transfer = xfer;
++	}
++
++	len = as->remaining_bytes;
++
++	tx_dma = xfer->tx_dma;
++	rx_dma = xfer->rx_dma;
++
++	if (rx_dma == INVALID_DMA_ADDRESS) {
++		rx_dma = as->buffer_dma;
++		if (len > BUFFER_SIZE)
++			len = BUFFER_SIZE;
++	}
++	if (tx_dma == INVALID_DMA_ADDRESS) {
++		if (xfer->tx_buf) {
++			tx_dma = as->buffer_dma;
++			if (len > BUFFER_SIZE)
++				len = BUFFER_SIZE;
++			memcpy(as->buffer, xfer->tx_buf, len);
++			dma_sync_single_for_device(&as->pdev->dev,
++						   as->buffer_dma, len,
++						   DMA_TO_DEVICE);
++		} else {
++			/* Send undefined data; rx_dma is handy */
++			tx_dma = rx_dma;
++		}
++	}
++
++	spi_writel(as, AT91_PDC_RPR, rx_dma);
++	spi_writel(as, AT91_PDC_TPR, tx_dma);
++
++	as->remaining_bytes -= len;
++	if (msg->spi->bits_per_word > 8)
++		len >>= 1;
++
++	/* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
++	 * mechanism might help avoid the IRQ latency between transfers
++	 *
++	 * We're also waiting for ENDRX before we start the next
++	 * transfer because we need to handle some difficult timing
++	 * issues otherwise. If we wait for ENDTX in one transfer and
++	 * then starts waiting for ENDRX in the next, it's difficult
++	 * to tell the difference between the ENDRX interrupt we're
++	 * actually waiting for and the ENDRX interrupt of the
++	 * previous transfer.
++	 *
++	 * It should be doable, though. Just not now...
++	 */
++	spi_writel(as, AT91_PDC_TNCR, 0);
++	spi_writel(as, AT91_PDC_RNCR, 0);
++	imr = ATMEL_SPI_ENDRX;
++
++	dev_dbg(&msg->spi->dev,
++		"start xfer %p: len %u tx %p/%08x rx %p/%08x imr %08x\n",
++		xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++		xfer->rx_buf, xfer->rx_dma, imr);
++
++	wmb();
++	spi_writel(as, AT91_PDC_TCR, len);
++	spi_writel(as, AT91_PDC_RCR, len);
++	spi_writel(as, AT91_PDC_PTCR, AT91_PDC_TXTEN | AT91_PDC_RXTEN);
++	spi_writel(as, ATMEL_SPI_IER, imr);
++}
++
++static void atmel_spi_next_message(struct spi_master *master)
++{
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++	struct spi_message	*msg;
++	u32			mr;
++
++	BUG_ON(as->current_transfer);
++
++	msg = list_entry(as->queue.next, struct spi_message, queue);
++
++	/* Select the chip */
++	mr = spi_readl(as, ATMEL_SPI_MR) & ~ATMEL_SPI_PCS;
++	spi_writel(as, ATMEL_SPI_MR, mr | ATMEL_SPI_PCS_(msg->spi->chip_select));
++	cs_activate(msg->spi);
++
++	atmel_spi_next_xfer(master, msg);
++}
++
++static void atmel_spi_dma_map_xfer(struct atmel_spi *as,
++				   struct spi_transfer *xfer)
++{
++	xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
++	if (!(xfer->len & (L1_CACHE_BYTES - 1))) {
++		if (xfer->tx_buf
++		    && !((unsigned long)xfer->tx_buf & (L1_CACHE_BYTES - 1)))
++			xfer->tx_dma = dma_map_single(&as->pdev->dev,
++						      xfer->tx_buf,
++						      xfer->len,
++						      DMA_TO_DEVICE);
++		if (xfer->rx_buf
++		    && !((unsigned long)xfer->rx_buf & (L1_CACHE_BYTES - 1)))
++			xfer->rx_dma = dma_map_single(&as->pdev->dev,
++						      xfer->rx_buf,
++						      xfer->len,
++						      DMA_FROM_DEVICE);
++	}
++}
++
++static irqreturn_t
++atmel_spi_interrupt(int irq, void *dev_id)
++{
++	struct spi_master	*master = dev_id;
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++	struct spi_message	*msg;
++	struct spi_transfer	*xfer;
++	u32			status, pending, imr;
++	int			ret = IRQ_NONE;
++
++	imr = spi_readl(as, ATMEL_SPI_IMR);
++	status = spi_readl(as, ATMEL_SPI_SR);
++	pending = status & imr;
++	pr_debug("spi irq: stat %05x imr %05x pend %05x\n", status, imr, pending);
++
++	if (pending & (ATMEL_SPI_ENDTX | ATMEL_SPI_ENDRX)) {
++		ret = IRQ_HANDLED;
++
++		spi_writel(as, ATMEL_SPI_IDR, pending);
++		spin_lock(&as->lock);
++
++		xfer = as->current_transfer;
++		msg = list_entry(as->queue.next, struct spi_message, queue);
++
++		/*
++		 * If the rx buffer wasn't aligned, we used a bounce
++		 * buffer for the transfer. Copy the data back and
++		 * make the bounce buffer ready for re-use.
++		 */
++		if (xfer->rx_buf && xfer->rx_dma == INVALID_DMA_ADDRESS) {
++			unsigned int len = xfer->len;
++			if (len > BUFFER_SIZE)
++				len = BUFFER_SIZE;
++
++			dma_sync_single_for_cpu(&as->pdev->dev, as->buffer_dma,
++						len, DMA_FROM_DEVICE);
++			memcpy((xfer->rx_buf + xfer->len
++				- len - as->remaining_bytes),
++			       as->buffer, len);
++		}
++
++
++		if (as->remaining_bytes == 0) {
++			msg->actual_length += xfer->len;
++
++			if (!msg->is_dma_mapped) {
++				if (xfer->tx_dma != INVALID_DMA_ADDRESS)
++					dma_unmap_single(master->cdev.dev,
++							 xfer->tx_dma,
++							 xfer->len,
++							 DMA_TO_DEVICE);
++				if (xfer->rx_dma != INVALID_DMA_ADDRESS)
++					dma_unmap_single(master->cdev.dev,
++							 xfer->rx_dma,
++							 xfer->len,
++							 DMA_FROM_DEVICE);
++			}
++
++			/* REVISIT: udelay in irq is unfriendly */
++			if (xfer->delay_usecs)
++				udelay(xfer->delay_usecs);
++
++			if (msg->transfers.prev == &xfer->transfer_list) {
++
++				/* report completed message */
++				cs_deactivate(msg->spi);
++				list_del(&msg->queue);
++				msg->status = 0;
++
++				dev_dbg(master->cdev.dev,
++					"xfer complete: %u bytes transferred\n",
++					msg->actual_length);
++
++				spin_unlock(&as->lock);
++				msg->complete(msg->context);
++				spin_lock(&as->lock);
++
++				as->current_transfer = NULL;
++
++				/* continue; complete() may have queued requests */
++				if (list_empty(&as->queue) || as->stopping)
++					spi_writel(as, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++				else
++					atmel_spi_next_message(master);
++			} else {
++				if (xfer->cs_change) {
++					cs_deactivate(msg->spi);
++					udelay(1);
++					cs_activate(msg->spi);
++				}
++
++				/*
++				 * Not done yet. Submit the next transfer.
++				 *
++				 * FIXME handle protocol options for xfer
++				 */
++				atmel_spi_next_xfer(master, msg);
++			}
++		} else {
++			/*
++			 * Keep going, we still have data to send in
++			 * the current transfer.
++			 */
++			atmel_spi_next_xfer(master, msg);
++		}
++		spin_unlock(&as->lock);
++	}
++
++	return ret;
++}
++
++#define MAX_SCBR	0xff
++
++static int atmel_spi_setup(struct spi_device *spi)
++{
++	struct atmel_spi	*as;
++	u32			scbr, csr;
++	unsigned int		bits = spi->bits_per_word;
++	unsigned long		bus_hz, sck_hz;
++	unsigned int		npcs_pin;
++	int			ret;
++
++	as = spi_master_get_devdata(spi->master);
++
++	if (as->stopping)
++		return -ESHUTDOWN;
++
++	if (spi->chip_select > spi->master->num_chipselect) {
++		dev_dbg(&spi->dev,
++				"setup: invalid chipselect %u (%u defined)\n",
++				spi->chip_select, spi->master->num_chipselect);
++		return -EINVAL;
++	}
++
++	if (bits == 0)
++		bits = 8;
++	if (bits < 8 || bits > 16) {
++		dev_dbg(&spi->dev,
++				"setup: invalid bits_per_word %u (8 to 16)\n",
++				bits);
++		return -EINVAL;
++	}
++
++	if (spi->mode & (SPI_CS_HIGH | SPI_LSB_FIRST)) {
++		dev_dbg(&spi->dev, "setup: unsupported mode %u\n", spi->mode);
++		return -EINVAL;
++	}
++
++	/* speed zero convention is used by some upper layers */
++	bus_hz = clk_get_rate(as->clk);
++	if (spi->max_speed_hz) {
++		/* assume div32/fdiv/mbz == 0 */
++		if (!as->new_1)
++			bus_hz /= 2;
++		scbr = ((bus_hz + spi->max_speed_hz - 1)
++			/ spi->max_speed_hz);
++		if (scbr > MAX_SCBR) {
++			dev_dbg(&spi->dev, "setup: %d Hz too slow, scbr %u\n",
++					spi->max_speed_hz, scbr);
++			return -EINVAL;
++		}
++	} else
++		scbr = 0xff;
++	sck_hz = bus_hz / scbr;
++
++	csr = ATMEL_SPI_SCBR_(scbr) | ATMEL_SPI_BITS_(bits);
++	if (spi->mode & SPI_CPOL)
++		csr |= ATMEL_SPI_CPOL;
++	if (!(spi->mode & SPI_CPHA))
++		csr |= ATMEL_SPI_NCPHA;
++
++	/* TODO: DLYBS and DLYBCT */
++	csr |= ATMEL_SPI_DLYBS_(10);
++	csr |= ATMEL_SPI_DLYBCT_(10);
++
++	npcs_pin = (unsigned int)spi->controller_data;
++	if (!spi->controller_state) {
++		ret = request_gpio(npcs_pin);
++		if (ret)
++			return ret;
++		spi->controller_state = (void *)npcs_pin;
++	}
++
++	gpio_set_value(npcs_pin, 1);
++	gpio_set_output_enable(npcs_pin, 1);
++	gpio_set_pullup_enable(npcs_pin, 0);
++
++	dev_dbg(&spi->dev,
++		"setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
++		sck_hz, bits, spi->mode, spi->chip_select, csr);
++
++	spi_writel(as, ATMEL_SPI_CSR(spi->chip_select), csr);
++
++	return 0;
++}
++
++static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
++{
++	struct atmel_spi	*as;
++	struct spi_transfer	*xfer;
++	unsigned long		flags;
++	struct device		*controller = spi->master->cdev.dev;
++
++	as = spi_master_get_devdata(spi->master);
++
++	dev_dbg(controller, "new message %p submitted for %s\n",
++			msg, spi->dev.bus_id);
++
++	if (unlikely(list_empty(&msg->transfers)
++			|| !spi->max_speed_hz))
++		return -EINVAL;
++
++	if (as->stopping)
++		return -ESHUTDOWN;
++
++	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++		if (!(xfer->tx_buf || xfer->rx_buf)) {
++			dev_dbg(&spi->dev, "missing rx or tx buf\n");
++			return -EINVAL;
++		}
++
++		/* FIXME implement these protocol options!! */
++		if (xfer->bits_per_word || xfer->speed_hz) {
++			dev_dbg(&spi->dev, "no protocol options yet\n");
++			return -ENOPROTOOPT;
++		}
++	}
++
++	/* scrub dcache "early" */
++	if (!msg->is_dma_mapped) {
++		list_for_each_entry(xfer, &msg->transfers, transfer_list)
++			atmel_spi_dma_map_xfer(as, xfer);
++	}
++
++	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++		dev_dbg(controller,
++			"  xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++			xfer, xfer->len,
++			xfer->tx_buf, xfer->tx_dma,
++			xfer->rx_buf, xfer->rx_dma);
++	}
++
++	msg->status = -EINPROGRESS;
++	msg->actual_length = 0;
++
++	spin_lock_irqsave(&as->lock, flags);
++	list_add_tail(&msg->queue, &as->queue);
++	if (!as->current_transfer)
++		atmel_spi_next_message(spi->master);
++	spin_unlock_irqrestore(&as->lock, flags);
++
++	return 0;
++}
++
++static void atmel_spi_cleanup(const struct spi_device *spi)
++{
++	if (spi->controller_state)
++		free_gpio((unsigned int)spi->controller_data);
++}
++
++/*-------------------------------------------------------------------------*/
++
++static int __devinit atmel_spi_probe(struct platform_device *pdev)
++{
++	struct resource		*regs;
++	int			irq;
++	struct clk		*clk;
++	int			ret = -ENOMEM;
++	struct spi_master	*master;
++	struct atmel_spi	*as;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	clk = clk_get(&pdev->dev, "spi_clk");
++	if (IS_ERR(clk))
++		return PTR_ERR(clk);
++
++	/* setup spi core then atmel-specific driver state */
++	master = spi_alloc_master(&pdev->dev, sizeof *as);
++	if (!master)
++		goto out_free;
++
++	master->bus_num = pdev->id;
++	master->num_chipselect = 4;
++	master->setup = atmel_spi_setup;
++	master->transfer = atmel_spi_transfer;
++	master->cleanup = atmel_spi_cleanup;
++	platform_set_drvdata(pdev, master);
++
++	as = spi_master_get_devdata(master);
++
++	as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
++					&as->buffer_dma, GFP_KERNEL);
++	if (!as->buffer)
++		goto out_free;
++
++	spin_lock_init(&as->lock);
++	INIT_LIST_HEAD(&as->queue);
++	as->pdev = pdev;
++	as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
++	if (!as->regs)
++		goto out_free_buffer;
++	as->irq = irq;
++	as->clk = clk;
++#if !defined(CONFIG_ARCH_AT91RM9200)
++	/* if (!cpu_is_at91rm9200()) */
++		as->new_1 = 1;
++#endif
++
++	ret = request_irq(irq, atmel_spi_interrupt, 0,
++			pdev->dev.bus_id, master);
++	if (ret)
++		goto out_unmap_regs;
++
++	/* Initialize the hardware */
++	clk_enable(clk);
++	spi_writel(as, ATMEL_SPI_CR, ATMEL_SPI_SWRST);
++	spi_writel(as, ATMEL_SPI_MR, ATMEL_SPI_MSTR | ATMEL_SPI_MODFDIS);
++	spi_writel(as, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++	spi_writel(as, ATMEL_SPI_CR, ATMEL_SPI_SPIEN);
++
++	/* go! */
++	dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
++			(unsigned long)regs->start, irq);
++
++	ret = spi_register_master(master);
++	if (ret)
++		goto out_reset_hw;
++
++	return 0;
++
++out_reset_hw:
++	spi_writel(as, ATMEL_SPI_CR, ATMEL_SPI_SWRST);
++	clk_disable(clk);
++	free_irq(irq, master);
++out_unmap_regs:
++	iounmap(as->regs);
++out_free_buffer:
++	dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
++			  as->buffer_dma);
++out_free:
++	clk_put(clk);
++	spi_master_put(master);
++	return ret;
++}
++
++static int __devexit atmel_spi_remove(struct platform_device *pdev)
++{
++	struct spi_master	*master = platform_get_drvdata(pdev);
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++	struct spi_message	*msg;
++
++	/* reset the hardware and block queue progress */
++	spin_lock_irq(&as->lock);
++	as->stopping = 1;
++	spi_writel(as, ATMEL_SPI_CR, ATMEL_SPI_SWRST);
++	spi_readl(as, ATMEL_SPI_SR);
++	spin_unlock_irq(&as->lock);
++
++	/* Terminate remaining queued transfers */
++	list_for_each_entry(msg, &as->queue, queue) {
++		/* REVISIT unmapping the dma is sort of a NOP on ARM,
++		 * but we shouldn't depend on that...
++		 */
++		msg->status = -ESHUTDOWN;
++		msg->complete(msg->context);
++	}
++
++	dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
++			  as->buffer_dma);
++
++	clk_disable(as->clk);
++	clk_put(as->clk);
++	free_irq(as->irq, master);
++	iounmap(as->regs);
++
++	spi_unregister_master(master);
++
++	return 0;
++}
++
++#ifdef	CONFIG_PM
++
++static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
++{
++	struct spi_master	*master = platform_get_drvdata(pdev);
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++
++	clk_disable(as->clk);
++	return 0;
++}
++
++static int atmel_spi_resume(struct platform_device *pdev)
++{
++	struct spi_master	*master = platform_get_drvdata(pdev);
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++
++	clk_enable(as->clk);
++	return 0;
++}
++
++#else
++#define	atmel_spi_suspend	NULL
++#define	atmel_spi_resume	NULL
++#endif
++
++
++static struct platform_driver atmel_spi_driver = {
++	.driver		= {
++		.name	= "atmel_spi",
++		.owner	= THIS_MODULE,
++	},
++	.probe		= atmel_spi_probe,
++	.suspend	= atmel_spi_suspend,
++	.resume		= atmel_spi_resume,
++	.remove		= __devexit_p(atmel_spi_remove),
++};
++
++static int __init atmel_spi_init(void)
++{
++	return platform_driver_register(&atmel_spi_driver);
++}
++module_init(atmel_spi_init);
++
++static void __exit atmel_spi_exit(void)
++{
++	platform_driver_unregister(&atmel_spi_driver);
++}
++module_exit(atmel_spi_exit);
++
++MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.19-final/drivers/spi/atmel_spi.h linux-2.6.19/drivers/spi/atmel_spi.h
+--- linux-2.6.19-final/drivers/spi/atmel_spi.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/spi/atmel_spi.h	Wed Nov 15 16:40:00 2006
+@@ -0,0 +1,86 @@
++/*
++ * drivers/spi/atmel_spi.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Serial Peripheral Interface (SPI) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef ATMEL_SPI_H
++#define ATMEL_SPI_H
++
++#define ATMEL_SPI_CR		0x00		/* Control Register */
++#define		ATMEL_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
++#define		ATMEL_SPI_SPIDIS	(1 <<  1)		/* SPI Disable */
++#define		ATMEL_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
++#define		ATMEL_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
++
++#define ATMEL_SPI_MR		0x04		/* Mode Register */
++#define		ATMEL_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
++#define		ATMEL_SPI_PS		(1    <<  1)		/* Peripheral Select */
++#define			ATMEL_SPI_PS_FIXED	(0 << 1)
++#define			ATMEL_SPI_PS_VARIABLE	(1 << 1)
++#define		ATMEL_SPI_PCSDEC	(1    <<  2)		/* Chip Select Decode */
++#define		ATMEL_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
++#define		ATMEL_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
++#define		ATMEL_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
++#define		ATMEL_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
++#define			ATMEL_SPI_PCS_(x)	(~(1 << (x+16)) & ATMEL_SPI_PCS)
++#define		ATMEL_SPI_DLYBCS	(0xff << 24)		/* Delay Between Chip Selects */
++
++#define ATMEL_SPI_RDR		0x08			/* Receive Data Register */
++#define		ATMEL_SPI_RD		(0xffff <<  0)		/* Receive Data */
++#define		ATMEL_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
++
++#define ATMEL_SPI_TDR		0x0c			/* Transmit Data Register */
++#define		ATMEL_SPI_TD		(0xffff <<  0)		/* Transmit Data */
++#define		ATMEL_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
++#define		ATMEL_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
++
++#define ATMEL_SPI_SR		0x10			/* Status Register */
++#define		ATMEL_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
++#define		ATMEL_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
++#define		ATMEL_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
++#define		ATMEL_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
++#define		ATMEL_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
++#define		ATMEL_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
++#define		ATMEL_SPI_RXBUFF	(1 <<  6)		/* RX Buffer Full */
++#define		ATMEL_SPI_TXBUFE	(1 <<  7)		/* TX Buffer Empty */
++#define		ATMEL_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
++#define		ATMEL_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
++#define		ATMEL_SPI_SPIENS	(1 << 16)		/* SPI Enable Status */
++
++#define ATMEL_SPI_IER		0x14			/* Interrupt Enable Register */
++#define ATMEL_SPI_IDR		0x18			/* Interrupt Disable Register */
++#define ATMEL_SPI_IMR		0x1c			/* Interrupt Mask Register */
++
++#define ATMEL_SPI_CSR(n)	(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
++#define		ATMEL_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
++#define		ATMEL_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
++#define		ATMEL_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
++#define		ATMEL_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
++#define			ATMEL_SPI_BITS_8	(0 << 4)
++#define			ATMEL_SPI_BITS_9	(1 << 4)
++#define			ATMEL_SPI_BITS_10	(2 << 4)
++#define			ATMEL_SPI_BITS_11	(3 << 4)
++#define			ATMEL_SPI_BITS_12	(4 << 4)
++#define			ATMEL_SPI_BITS_13	(5 << 4)
++#define			ATMEL_SPI_BITS_14	(6 << 4)
++#define			ATMEL_SPI_BITS_15	(7 << 4)
++#define			ATMEL_SPI_BITS_16	(8 << 4)
++#define			ATMEL_SPI_BITS_(x)	((x - 8) << 4)
++#define		ATMEL_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
++#define			ATMEL_SPI_SCBR_(x)	((x) << 8)
++#define		ATMEL_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
++#define			ATMEL_SPI_DLYBS_(x)	((x) << 16)
++#define		ATMEL_SPI_DLYBCT	(0xff << 24)		/* Delay between Consecutive Transfers */
++#define			ATMEL_SPI_DLYBCT_(x)	((x) << 24)
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/drivers/spi/spi_at91_bitbang.c linux-2.6.19/drivers/spi/spi_at91_bitbang.c
+--- linux-2.6.19-final/drivers/spi/spi_at91_bitbang.c	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/drivers/spi/spi_at91_bitbang.c	Thu Oct 12 17:07:39 2006
+@@ -0,0 +1,207 @@
++/*
++ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
++ *
++ * Copyright (C) 2006 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++
++#include <asm/arch/gpio.h>
++
++
++/*
++ * FIXME this bitbanging version is just to help bootstrap systems until
++ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
++ * be a drop-in replacement for this one, and much faster.
++ *
++ * remember:
++ *
++ *	- other at91 parts (like at91sam9) have multiple controllers
++ *	  and different pin muxing; this version is at91rm9200 specfic.
++ *
++ *	- at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
++ *
++ *	- rm9200 spi chipselects drop wrongly, so the native driver
++ *	  will need to use gpios much like this does.
++ *
++ *	- real hardware only allows 8..16 bits per word, while this
++ *	  bitbanger allows 1..32 (incompatible superset).
++ *
++ *	- this disregards clock parameters.  with inlined gpio calls,
++ *	  gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
++ *	  than using the subroutined veresion from txrx_word().
++ *
++ *	- suspend/resume and <linux/clk.h> support is missing ...
++ */
++
++#define	spi_miso_bit	AT91_PIN_PA0
++#define	spi_mosi_bit	AT91_PIN_PA1
++#define	spi_sck_bit	AT91_PIN_PA2
++
++struct at91_spi {
++	struct spi_bitbang	bitbang;
++	struct platform_device	*pdev;
++};
++
++/*----------------------------------------------------------------------*/
++
++static inline void setsck(struct spi_device *spi, int is_on)
++{
++	at91_set_gpio_value(spi_sck_bit, is_on);
++}
++
++static inline void setmosi(struct spi_device *spi, int is_on)
++{
++	at91_set_gpio_value(spi_mosi_bit, is_on);
++}
++
++static inline int getmiso(struct spi_device *spi)
++{
++	return at91_get_gpio_value(spi_miso_bit);
++}
++
++static void at91_spi_chipselect(struct spi_device *spi, int is_active)
++{
++	unsigned long cs = (unsigned long) spi->controller_data;
++
++	/* set default clock polarity */
++	if (is_active)
++		setsck(spi, spi->mode & SPI_CPOL);
++
++	/* only support active-low (default) */
++	at91_set_gpio_value(cs, !is_active);
++}
++
++/*
++ * NOTE:  this is "as fast as we can"; it should be a function of
++ * the device clock ...
++ */
++#define	spidelay(X)	do{} while(0)
++
++#define	EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
++}
++
++/*----------------------------------------------------------------------*/
++
++static int __init at91_spi_probe(struct platform_device *pdev)
++{
++	int			status;
++	struct spi_master	*master;
++	struct at91_spi		*at91_spi;
++
++	if (pdev->id != 0)	/* SPI0 bus */
++		return -EINVAL;
++
++	master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
++	if (!master)
++		return -ENOMEM;
++
++	at91_spi = spi_master_get_devdata(master);
++	at91_spi->pdev = pdev;
++	platform_set_drvdata(pdev, at91_spi);
++
++	/* SPI and bitbang hookup */
++	master->bus_num = 0;
++	master->num_chipselect = 4;
++
++	at91_spi->bitbang.master = spi_master_get(master);
++	at91_spi->bitbang.chipselect = at91_spi_chipselect;
++	at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
++	at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
++	at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
++	at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
++
++	status = spi_bitbang_start(&at91_spi->bitbang);
++	if (status < 0)
++		(void) spi_master_put(at91_spi->bitbang.master);
++
++	return status;
++}
++
++static int __exit at91_spi_remove(struct platform_device *pdev)
++{
++	struct at91_spi	*at91_spi = platform_get_drvdata(pdev);
++	int status;
++
++	/* stop() unregisters child devices too */
++	status = spi_bitbang_stop(&at91_spi->bitbang);
++	(void) spi_master_put(at91_spi->bitbang.master);
++
++	platform_set_drvdata(pdev, NULL);
++	return status;
++}
++
++static struct platform_driver at91_spi_driver = {
++	.probe		= at91_spi_probe,
++	.remove		= __exit_p(at91_spi_remove),
++	.driver		= {
++		.name	= "at91_spi",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91_spi_init(void)
++{
++	at91_set_gpio_output(spi_sck_bit, 0);
++	at91_set_gpio_output(spi_mosi_bit, 0);
++	at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
++
++	/* register driver */
++	return platform_driver_register(&at91_spi_driver);
++}
++
++static void __exit at91_spi_exit(void)
++{
++	platform_driver_unregister(&at91_spi_driver);
++}
++
++device_initcall(at91_spi_init);
++module_exit(at91_spi_exit);
++
++MODULE_ALIAS("at91_spi.0");
++
++MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
++MODULE_AUTHOR("David Brownell");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.19-final/drivers/usb/Kconfig linux-2.6.19/drivers/usb/Kconfig
+--- linux-2.6.19-final/drivers/usb/Kconfig	Mon Dec  4 16:40:49 2006
++++ linux-2.6.19/drivers/usb/Kconfig	Thu Oct 12 17:07:39 2006
+@@ -24,7 +24,7 @@
+ 	default y if ARCH_S3C2410
+ 	default y if PXA27x
+ 	default y if ARCH_EP93XX
+-	default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
++	default y if ARCH_AT91
+ 	default y if ARCH_PNX4008
+ 	# PPC:
+ 	default y if STB03xxx
+diff -urN -x CVS linux-2.6.19-final/drivers/usb/gadget/Kconfig linux-2.6.19/drivers/usb/gadget/Kconfig
+--- linux-2.6.19-final/drivers/usb/gadget/Kconfig	Mon Dec  4 16:40:49 2006
++++ linux-2.6.19/drivers/usb/gadget/Kconfig	Thu Oct 12 17:07:39 2006
+@@ -189,7 +189,7 @@
+ 
+ config USB_GADGET_AT91
+ 	boolean "AT91 USB Device Port"
+-	depends on ARCH_AT91RM9200
++	depends on ARCH_AT91
+ 	select USB_GADGET_SELECTED
+ 	help
+ 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
+diff -urN -x CVS linux-2.6.19-final/drivers/usb/gadget/at91_udc.c linux-2.6.19/drivers/usb/gadget/at91_udc.c
+--- linux-2.6.19-final/drivers/usb/gadget/at91_udc.c	Mon Dec  4 16:40:49 2006
++++ linux-2.6.19/drivers/usb/gadget/at91_udc.c	Wed Nov 15 11:33:30 2006
+@@ -43,14 +43,16 @@
+ #include <linux/usb_gadget.h>
+ 
+ #include <asm/byteorder.h>
++#include <asm/hardware.h>
+ #include <asm/io.h>
+ #include <asm/irq.h>
+ #include <asm/system.h>
+ #include <asm/mach-types.h>
+ 
+-#include <asm/arch/hardware.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/at91sam9261_matrix.h>
+ 
+ #include "at91_udc.h"
+ 
+@@ -78,27 +80,9 @@
+ static const char driver_name [] = "at91_udc";
+ static const char ep0name[] = "ep0";
+ 
+-/*-------------------------------------------------------------------------*/
+ 
+-/*
+- * Read from a UDP register.
+- */
+-static inline unsigned long at91_udp_read(unsigned int reg)
+-{
+-	void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
+-
+-	return __raw_readl(udp_base + reg);
+-}
+-
+-/*
+- * Write to a UDP register.
+- */
+-static inline void at91_udp_write(unsigned int reg, unsigned long value)
+-{
+-	void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
+-
+-	__raw_writel(value, udp_base + reg);
+-}
++#define at91_udp_read(dev, reg)		__raw_readl((dev)->udp_baseaddr + (reg))
++#define at91_udp_write(dev, reg, val)	__raw_writel((val), (dev)->udp_baseaddr + (reg))
+ 
+ /*-------------------------------------------------------------------------*/
+ 
+@@ -210,13 +194,13 @@
+ 		return 0;
+ 	}
+ 
+-	tmp = at91_udp_read(AT91_UDP_FRM_NUM);
++	tmp = at91_udp_read(udc, AT91_UDP_FRM_NUM);
+ 	seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp,
+ 		(tmp & AT91_UDP_FRM_OK) ? " ok" : "",
+ 		(tmp & AT91_UDP_FRM_ERR) ? " err" : "",
+ 		(tmp & AT91_UDP_NUM));
+ 
+-	tmp = at91_udp_read(AT91_UDP_GLB_STAT);
++	tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+ 	seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp,
+ 		(tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "",
+ 		(tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "",
+@@ -224,13 +208,13 @@
+ 		(tmp & AT91_UDP_CONFG) ? " confg" : "",
+ 		(tmp & AT91_UDP_FADDEN) ? " fadden" : "");
+ 
+-	tmp = at91_udp_read(AT91_UDP_FADDR);
++	tmp = at91_udp_read(udc, AT91_UDP_FADDR);
+ 	seq_printf(s, "faddr   %03x:%s fadd=%d\n", tmp,
+ 		(tmp & AT91_UDP_FEN) ? " fen" : "",
+ 		(tmp & AT91_UDP_FADD));
+ 
+-	proc_irq_show(s, "imr   ", at91_udp_read(AT91_UDP_IMR));
+-	proc_irq_show(s, "isr   ", at91_udp_read(AT91_UDP_ISR));
++	proc_irq_show(s, "imr   ", at91_udp_read(udc, AT91_UDP_IMR));
++	proc_irq_show(s, "isr   ", at91_udp_read(udc, AT91_UDP_ISR));
+ 
+ 	if (udc->enabled && udc->vbus) {
+ 		proc_ep_show(s, &udc->ep[0]);
+@@ -286,6 +270,7 @@
+ static void done(struct at91_ep *ep, struct at91_request *req, int status)
+ {
+ 	unsigned	stopped = ep->stopped;
++	struct at91_udc	*udc = ep->udc;
+ 
+ 	list_del_init(&req->queue);
+ 	if (req->req.status == -EINPROGRESS)
+@@ -300,8 +285,8 @@
+ 	ep->stopped = stopped;
+ 
+ 	/* ep0 is always ready; other endpoints need a non-empty queue */
+-	if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
+-		at91_udp_write(AT91_UDP_IDR, ep->int_mask);
++	if (list_empty(&ep->queue) && (ep->id != 0))
++		at91_udp_write(udc, AT91_UDP_IDR, 1 << ep->id);
+ }
+ 
+ /*-------------------------------------------------------------------------*/
+@@ -554,8 +539,8 @@
+ 	 * reset/init endpoint fifo.  NOTE:  leaves fifo_bank alone,
+ 	 * since endpoint resets don't reset hw pingpong state.
+ 	 */
+-	at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+-	at91_udp_write(AT91_UDP_RST_EP, 0);
++	at91_udp_write(dev, AT91_UDP_RST_EP, 1 << ep->id);
++	at91_udp_write(dev, AT91_UDP_RST_EP, 0);
+ 
+ 	local_irq_restore(flags);
+ 	return 0;
+@@ -564,6 +549,7 @@
+ static int at91_ep_disable (struct usb_ep * _ep)
+ {
+ 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
++	struct at91_udc	*udc = ep->udc;
+ 	unsigned long	flags;
+ 
+ 	if (ep == &ep->udc->ep[0])
+@@ -579,8 +565,8 @@
+ 
+ 	/* reset fifos and endpoint */
+ 	if (ep->udc->clocked) {
+-		at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+-		at91_udp_write(AT91_UDP_RST_EP, 0);
++		at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
++		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+ 		__raw_writel(0, ep->creg);
+ 	}
+ 
+@@ -695,10 +681,10 @@
+ 			 * reconfigures the endpoints.
+ 			 */
+ 			if (dev->wait_for_config_ack) {
+-				tmp = at91_udp_read(AT91_UDP_GLB_STAT);
++				tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
+ 				tmp ^= AT91_UDP_CONFG;
+ 				VDBG("toggle config\n");
+-				at91_udp_write(AT91_UDP_GLB_STAT, tmp);
++				at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
+ 			}
+ 			if (req->req.length == 0) {
+ ep0_in_status:
+@@ -727,7 +713,7 @@
+ 
+ 	if (req && !status) {
+ 		list_add_tail (&req->queue, &ep->queue);
+-		at91_udp_write(AT91_UDP_IER, ep->int_mask);
++		at91_udp_write(dev, AT91_UDP_IER, 1 << ep->id);
+ 	}
+ done:
+ 	local_irq_restore(flags);
+@@ -758,6 +744,7 @@
+ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
+ {
+ 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
++	struct at91_udc	*udc = ep->udc;
+ 	u32 __iomem	*creg;
+ 	u32		csr;
+ 	unsigned long	flags;
+@@ -785,8 +772,8 @@
+ 			csr |= AT91_UDP_FORCESTALL;
+ 			VDBG("halt %s\n", ep->ep.name);
+ 		} else {
+-			at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+-			at91_udp_write(AT91_UDP_RST_EP, 0);
++			at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
++			at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+ 			csr &= ~AT91_UDP_FORCESTALL;
+ 		}
+ 		__raw_writel(csr, creg);
+@@ -813,9 +800,11 @@
+ 
+ static int at91_get_frame(struct usb_gadget *gadget)
+ {
++	struct at91_udc *udc = to_udc(gadget);
++
+ 	if (!to_udc(gadget)->clocked)
+ 		return -EINVAL;
+-	return at91_udp_read(AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
++	return at91_udp_read(udc, AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
+ }
+ 
+ static int at91_wakeup(struct usb_gadget *gadget)
+@@ -833,11 +822,11 @@
+ 
+ 	/* NOTE:  some "early versions" handle ESR differently ... */
+ 
+-	glbstate = at91_udp_read(AT91_UDP_GLB_STAT);
++	glbstate = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+ 	if (!(glbstate & AT91_UDP_ESR))
+ 		goto done;
+ 	glbstate |= AT91_UDP_ESR;
+-	at91_udp_write(AT91_UDP_GLB_STAT, glbstate);
++	at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
+ 
+ done:
+ 	local_irq_restore(flags);
+@@ -861,6 +850,7 @@
+ 		ep->stopped = 0;
+ 		ep->fifo_bank = 0;
+ 		ep->ep.maxpacket = ep->maxpacket;
++		ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
+ 		// initialiser une queue par endpoint
+ 		INIT_LIST_HEAD(&ep->queue);
+ 	}
+@@ -915,14 +905,25 @@
+ 	if (!udc->enabled || !udc->vbus)
+ 		is_on = 0;
+ 	DBG("%sactive\n", is_on ? "" : "in");
++
+ 	if (is_on) {
+ 		clk_on(udc);
+-		at91_udp_write(AT91_UDP_TXVC, 0);
+-		at91_set_gpio_value(udc->board.pullup_pin, 1);
+-	} else  {
++		at91_udp_write(udc, AT91_UDP_TXVC, 0);
++		if (cpu_is_at91rm9200())
++			at91_set_gpio_value(udc->board.pullup_pin, 1);
++		else if (cpu_is_at91sam9260())
++			at91_udp_write(udc, AT91_UDP_TXVC, (at91_udp_read(udc, AT91_UDP_TXVC) | AT91_UDP_TXVC_PUON));
++		else if (cpu_is_at91sam9261())
++			at91_sys_write(AT91_MATRIX_USBPUCR, (at91_sys_read(AT91_MATRIX_USBPUCR) | AT91_MATRIX_USBPUCR_PUON));
++	} else {
+ 		stop_activity(udc);
+-		at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+-		at91_set_gpio_value(udc->board.pullup_pin, 0);
++		at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
++		if (cpu_is_at91rm9200())
++			at91_set_gpio_value(udc->board.pullup_pin, 0);
++		else if (cpu_is_at91sam9260())
++			at91_udp_write(udc, AT91_UDP_TXVC, (at91_udp_read(udc, AT91_UDP_TXVC) & ~AT91_UDP_TXVC_PUON));
++		else if (cpu_is_at91sam9261())
++			at91_sys_write(AT91_MATRIX_USBPUCR, (at91_sys_read(AT91_MATRIX_USBPUCR) & ~AT91_MATRIX_USBPUCR_PUON));
+ 		clk_off(udc);
+ 	}
+ }
+@@ -1086,7 +1087,7 @@
+ 
+ 	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ 			| USB_REQ_SET_CONFIGURATION:
+-		tmp = at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
++		tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
+ 		if (pkt.r.wValue)
+ 			udc->wait_for_config_ack = (tmp == 0);
+ 		else
+@@ -1103,7 +1104,7 @@
+ 	case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ 			| USB_REQ_GET_STATUS:
+ 		tmp = (udc->selfpowered << USB_DEVICE_SELF_POWERED);
+-		if (at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
++		if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
+ 			tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+ 		PACKET("get device status\n");
+ 		__raw_writeb(tmp, dreg);
+@@ -1114,17 +1115,17 @@
+ 			| USB_REQ_SET_FEATURE:
+ 		if (w_value != USB_DEVICE_REMOTE_WAKEUP)
+ 			goto stall;
+-		tmp = at91_udp_read(AT91_UDP_GLB_STAT);
++		tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+ 		tmp |= AT91_UDP_ESR;
+-		at91_udp_write(AT91_UDP_GLB_STAT, tmp);
++		at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
+ 		goto succeed;
+ 	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ 			| USB_REQ_CLEAR_FEATURE:
+ 		if (w_value != USB_DEVICE_REMOTE_WAKEUP)
+ 			goto stall;
+-		tmp = at91_udp_read(AT91_UDP_GLB_STAT);
++		tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+ 		tmp &= ~AT91_UDP_ESR;
+-		at91_udp_write(AT91_UDP_GLB_STAT, tmp);
++		at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
+ 		goto succeed;
+ 
+ 	/*
+@@ -1206,8 +1207,8 @@
+ 		} else if (ep->is_in)
+ 			goto stall;
+ 
+-		at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+-		at91_udp_write(AT91_UDP_RST_EP, 0);
++		at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
++		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+ 		tmp = __raw_readl(ep->creg);
+ 		tmp |= CLR_FX;
+ 		tmp &= ~(SET_FX | AT91_UDP_FORCESTALL);
+@@ -1300,13 +1301,13 @@
+ 			if (udc->wait_for_addr_ack) {
+ 				u32	tmp;
+ 
+-				at91_udp_write(AT91_UDP_FADDR,
++				at91_udp_write(udc, AT91_UDP_FADDR,
+ 						AT91_UDP_FEN | udc->addr);
+-				tmp = at91_udp_read(AT91_UDP_GLB_STAT);
++				tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+ 				tmp &= ~AT91_UDP_FADDEN;
+ 				if (udc->addr)
+ 					tmp |= AT91_UDP_FADDEN;
+-				at91_udp_write(AT91_UDP_GLB_STAT, tmp);
++				at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
+ 
+ 				udc->wait_for_addr_ack = 0;
+ 				VDBG("address %d\n", udc->addr);
+@@ -1374,28 +1375,28 @@
+ 	while (rescans--) {
+ 		u32 status;
+ 
+-		status = at91_udp_read(AT91_UDP_ISR)
+-			& at91_udp_read(AT91_UDP_IMR);
++		status = at91_udp_read(udc, AT91_UDP_ISR)
++			& at91_udp_read(udc, AT91_UDP_IMR);
+ 		if (!status)
+ 			break;
+ 
+ 		/* USB reset irq:  not maskable */
+ 		if (status & AT91_UDP_ENDBUSRES) {
+-			at91_udp_write(AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
+-			at91_udp_write(AT91_UDP_IER, MINIMUS_INTERRUPTUS);
++			at91_udp_write(udc, AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
++			at91_udp_write(udc, AT91_UDP_IER, MINIMUS_INTERRUPTUS);
+ 			/* Atmel code clears this irq twice */
+-			at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+-			at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
++			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
++			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ 			VDBG("end bus reset\n");
+ 			udc->addr = 0;
+ 			stop_activity(udc);
+ 
+ 			/* enable ep0 */
+-			at91_udp_write(AT91_UDP_CSR(0),
++			at91_udp_write(udc, AT91_UDP_CSR(0),
+ 					AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
+ 			udc->gadget.speed = USB_SPEED_FULL;
+ 			udc->suspended = 0;
+-			at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
++			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_EP(0));
+ 
+ 			/*
+ 			 * NOTE:  this driver keeps clocks off unless the
+@@ -1406,9 +1407,9 @@
+ 
+ 		/* host initiated suspend (3+ms bus idle) */
+ 		} else if (status & AT91_UDP_RXSUSP) {
+-			at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXSUSP);
+-			at91_udp_write(AT91_UDP_IER, AT91_UDP_RXRSM);
+-			at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXSUSP);
++			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP);
++			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM);
++			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP);
+ 			// VDBG("bus suspend\n");
+ 			if (udc->suspended)
+ 				continue;
+@@ -1425,9 +1426,9 @@
+ 
+ 		/* host initiated resume */
+ 		} else if (status & AT91_UDP_RXRSM) {
+-			at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXRSM);
+-			at91_udp_write(AT91_UDP_IER, AT91_UDP_RXSUSP);
+-			at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXRSM);
++			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
++			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP);
++			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
+ 			// VDBG("bus resume\n");
+ 			if (!udc->suspended)
+ 				continue;
+@@ -1479,17 +1480,16 @@
+ 		}
+ 	},
+ 	.ep[0] = {
++		.id		= 0,
+ 		.ep = {
+ 			.name	= ep0name,
+ 			.ops	= &at91_ep_ops,
+ 		},
+ 		.udc		= &controller,
+ 		.maxpacket	= 8,
+-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+-					+ AT91_UDP_CSR(0)),
+-		.int_mask	= 1 << 0,
+ 	},
+ 	.ep[1] = {
++		.id		= 1,
+ 		.ep = {
+ 			.name	= "ep1",
+ 			.ops	= &at91_ep_ops,
+@@ -1497,11 +1497,9 @@
+ 		.udc		= &controller,
+ 		.is_pingpong	= 1,
+ 		.maxpacket	= 64,
+-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+-					+ AT91_UDP_CSR(1)),
+-		.int_mask	= 1 << 1,
+ 	},
+ 	.ep[2] = {
++		.id		= 2,
+ 		.ep = {
+ 			.name	= "ep2",
+ 			.ops	= &at91_ep_ops,
+@@ -1509,11 +1507,9 @@
+ 		.udc		= &controller,
+ 		.is_pingpong	= 1,
+ 		.maxpacket	= 64,
+-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+-					+ AT91_UDP_CSR(2)),
+-		.int_mask	= 1 << 2,
+ 	},
+ 	.ep[3] = {
++		.id		= 3,
+ 		.ep = {
+ 			/* could actually do bulk too */
+ 			.name	= "ep3-int",
+@@ -1521,11 +1517,9 @@
+ 		},
+ 		.udc		= &controller,
+ 		.maxpacket	= 8,
+-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+-					+ AT91_UDP_CSR(3)),
+-		.int_mask	= 1 << 3,
+ 	},
+ 	.ep[4] = {
++		.id		= 4,
+ 		.ep = {
+ 			.name	= "ep4",
+ 			.ops	= &at91_ep_ops,
+@@ -1533,11 +1527,9 @@
+ 		.udc		= &controller,
+ 		.is_pingpong	= 1,
+ 		.maxpacket	= 256,
+-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+-					+ AT91_UDP_CSR(4)),
+-		.int_mask	= 1 << 4,
+ 	},
+ 	.ep[5] = {
++		.id		= 5,
+ 		.ep = {
+ 			.name	= "ep5",
+ 			.ops	= &at91_ep_ops,
+@@ -1545,9 +1537,6 @@
+ 		.udc		= &controller,
+ 		.is_pingpong	= 1,
+ 		.maxpacket	= 256,
+-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+-					+ AT91_UDP_CSR(5)),
+-		.int_mask	= 1 << 5,
+ 	},
+ 	/* ep6 and ep7 are also reserved (custom silicon might use them) */
+ };
+@@ -1616,7 +1605,7 @@
+ 
+ 	local_irq_disable();
+ 	udc->enabled = 0;
+-	at91_udp_write(AT91_UDP_IDR, ~0);
++	at91_udp_write(udc, AT91_UDP_IDR, ~0);
+ 	pullup(udc, 0);
+ 	local_irq_enable();
+ 
+@@ -1641,6 +1630,7 @@
+ 	struct device	*dev = &pdev->dev;
+ 	struct at91_udc	*udc;
+ 	int		retval;
++	struct resource	*res;
+ 
+ 	if (!dev->platform_data) {
+ 		/* small (so we copy it) but critical! */
+@@ -1658,7 +1648,11 @@
+ 		return -ENODEV;
+ 	}
+ 
+-	if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENXIO;
++
++	if (!request_mem_region(res->start, res->end - res->start + 1, driver_name)) {
+ 		DBG("someone's using UDC memory\n");
+ 		return -EBUSY;
+ 	}
+@@ -1668,15 +1662,23 @@
+ 	udc->gadget.dev.parent = dev;
+ 	udc->board = *(struct at91_udc_data *) dev->platform_data;
+ 	udc->pdev = pdev;
+-	udc_reinit(udc);
+ 	udc->enabled = 0;
+ 
++	udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1);
++	if (!udc->udp_baseaddr) {
++		release_mem_region(res->start, res->end - res->start + 1);
++		return -ENOMEM;
++	}
++
++	udc_reinit(udc);
++
+ 	/* get interface and function clocks */
+ 	udc->iclk = clk_get(dev, "udc_clk");
+ 	udc->fclk = clk_get(dev, "udpck");
+ 	if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
+ 		DBG("clocks missing\n");
+-		return -ENODEV;
++		retval = -ENODEV;
++		goto fail0;
+ 	}
+ 
+ 	retval = device_register(&udc->gadget.dev);
+@@ -1685,8 +1687,10 @@
+ 
+ 	/* don't do anything until we have both gadget driver and VBUS */
+ 	clk_enable(udc->iclk);
+-	at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+-	at91_udp_write(AT91_UDP_IDR, 0xffffffff);
++	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
++	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
++	/* Clear all pending interrupts - UDP may be used by bootloader. */
++	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
+ 	clk_disable(udc->iclk);
+ 
+ 	/* request UDC and maybe VBUS irqs */
+@@ -1698,6 +1702,11 @@
+ 		goto fail1;
+ 	}
+ 	if (udc->board.vbus_pin > 0) {
++		/*
++		 * Get the initial state of VBUS - we cannot expect
++		 * a pending interrupt.
++		 */
++		udc->vbus = at91_get_gpio_value(udc->board.vbus_pin);
+ 		if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+ 				IRQF_DISABLED, driver_name, udc)) {
+ 			DBG("request vbus irq %d failed\n",
+@@ -1720,7 +1729,7 @@
+ fail1:
+ 	device_unregister(&udc->gadget.dev);
+ fail0:
+-	release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
++	release_mem_region(res->start, res->end - res->start + 1);
+ 	DBG("%s probe failed, %d\n", driver_name, retval);
+ 	return retval;
+ }
+@@ -1728,6 +1737,7 @@
+ static int __devexit at91udc_remove(struct platform_device *pdev)
+ {
+ 	struct at91_udc *udc = platform_get_drvdata(pdev);
++	struct resource *res;
+ 
+ 	DBG("remove\n");
+ 
+@@ -1742,7 +1752,10 @@
+ 		free_irq(udc->board.vbus_pin, udc);
+ 	free_irq(udc->udp_irq, udc);
+ 	device_unregister(&udc->gadget.dev);
+-	release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
++
++	iounmap(udc->udp_baseaddr);
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	release_mem_region(res->start, res->end - res->start + 1);
+ 
+ 	clk_put(udc->iclk);
+ 	clk_put(udc->fclk);
+diff -urN -x CVS linux-2.6.19-final/drivers/usb/gadget/at91_udc.h linux-2.6.19/drivers/usb/gadget/at91_udc.h
+--- linux-2.6.19-final/drivers/usb/gadget/at91_udc.h	Mon Dec  4 16:34:04 2006
++++ linux-2.6.19/drivers/usb/gadget/at91_udc.h	Thu Nov 16 17:30:01 2006
+@@ -51,10 +51,10 @@
+ #define     AT91_UDP_EP(n)	(1 << (n))	/* Endpoint Interrupt Status */
+ #define     AT91_UDP_RXSUSP	(1 <<  8) 	/* USB Suspend Interrupt Status */
+ #define     AT91_UDP_RXRSM	(1 <<  9)	/* USB Resume Interrupt Status */
+-#define     AT91_UDP_EXTRSM	(1 << 10)	/* External Resume Interrupt Status */
++#define     AT91_UDP_EXTRSM	(1 << 10)	/* External Resume Interrupt Status [AT91RM9200 only] */
+ #define     AT91_UDP_SOFINT	(1 << 11)	/* Start of Frame Interrupt Status */
+ #define     AT91_UDP_ENDBUSRES	(1 << 12)	/* End of Bus Reset Interrpt Status */
+-#define     AT91_UDP_WAKEUP	(1 << 13)	/* USB Wakeup Interrupt Status */
++#define     AT91_UDP_WAKEUP	(1 << 13)	/* USB Wakeup Interrupt Status [AT91RM9200 only] */
+ 
+ #define AT91_UDP_ICR		0x20		/* Interrupt Clear Register */
+ #define AT91_UDP_RST_EP		0x28		/* Reset Endpoint Register */
+@@ -84,7 +84,7 @@
+ 
+ #define AT91_UDP_TXVC		0x74		/* Transceiver Control Register */
+ #define     AT91_UDP_TXVC_TXVDIS (1 << 8)	/* Transceiver Disable */
+-
++#define	    AT91_UDP_TXVC_PUON   (1 << 9)	/* PullUp On [AT91SAM9260 only] */
+ 
+ /*-------------------------------------------------------------------------*/
+ 
+@@ -105,10 +105,10 @@
+ 	struct usb_ep			ep;
+ 	struct list_head		queue;
+ 	struct at91_udc			*udc;
++	u8				id;
+ 	void __iomem			*creg;
+ 
+ 	unsigned			maxpacket:16;
+-	u8				int_mask;
+ 	unsigned			is_pingpong:1;
+ 
+ 	unsigned			stopped:1;
+@@ -141,6 +141,7 @@
+ 	struct clk			*iclk, *fclk;
+ 	struct platform_device		*pdev;
+ 	struct proc_dir_entry		*pde;
++	void __iomem			*udp_baseaddr;
+ 	int				udp_irq;
+ };
+ 
+diff -urN -x CVS linux-2.6.19-final/drivers/usb/host/ohci-at91.c linux-2.6.19/drivers/usb/host/ohci-at91.c
+--- linux-2.6.19-final/drivers/usb/host/ohci-at91.c	Mon Dec  4 16:40:49 2006
++++ linux-2.6.19/drivers/usb/host/ohci-at91.c	Mon Oct 16 17:19:45 2006
+@@ -187,7 +187,6 @@
+ {
+ 	struct at91_usbh_data	*board = hcd->self.controller->platform_data;
+ 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+-	struct usb_device	*root = hcd->self.root_hub;
+ 	int			ret;
+ 
+ 	if ((ret = ohci_init(ohci)) < 0)
+diff -urN -x CVS linux-2.6.19-final/drivers/usb/host/ohci-hcd.c linux-2.6.19/drivers/usb/host/ohci-hcd.c
+--- linux-2.6.19-final/drivers/usb/host/ohci-hcd.c	Mon Dec  4 16:40:49 2006
++++ linux-2.6.19/drivers/usb/host/ohci-hcd.c	Thu Nov 30 09:08:25 2006
+@@ -935,7 +935,7 @@
+ #include "ohci-ppc-soc.c"
+ #endif
+ 
+-#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
++#ifdef CONFIG_ARCH_AT91
+ #include "ohci-at91.c"
+ #endif
+ 
+@@ -952,8 +952,7 @@
+       || defined (CONFIG_ARCH_EP93XX) \
+       || defined (CONFIG_SOC_AU1X00) \
+       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
+-      || defined (CONFIG_ARCH_AT91RM9200) \
+-      || defined (CONFIG_ARCH_AT91SAM9261) \
++      || defined (CONFIG_ARCH_AT91) \
+       || defined (CONFIG_ARCH_PNX4008) \
+ 	)
+ #error "missing bus glue for ohci-hcd"
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_aic.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_aic.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_aic.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_aic.h	Tue Oct 24 16:14:13 2006
+@@ -0,0 +1,53 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_aic.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Advanced Interrupt Controller (AIC) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_AIC_H
++#define AT91_AIC_H
++
++#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
++#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
++#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
++#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
++#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
++#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
++#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
++
++#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
++#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
++#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
++#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
++#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
++
++#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
++#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
++#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
++#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
++#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
++
++#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
++#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
++#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
++#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
++#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
++#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
++#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
++#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
++#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
++
++#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
++#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
++#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_dbgu.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_dbgu.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_dbgu.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_dbgu.h	Tue Oct 24 16:03:07 2006
+@@ -0,0 +1,45 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_dbgu.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Debug Unit (DBGU) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_DBGU_H
++#define AT91_DBGU_H
++
++#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
++#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
++#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
++#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
++#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
++#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
++#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
++#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
++#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
++#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
++#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
++
++#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
++#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
++#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
++#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
++#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
++#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
++#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
++#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
++#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
++#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
++
++#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
++#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_ecc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_ecc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_ecc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_ecc.h	Wed Nov 15 11:56:12 2006
+@@ -0,0 +1,38 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_ecc.h
++ *
++ * Error Corrected Code Controller (ECC) - System peripherals regsters.
++ * Based on AT91SAM9260 datasheet revision B.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#ifndef AT91_ECC_H
++#define AT91_ECC_H
++
++#define AT91_ECC_CR		(AT91_ECC + 0x00)	/* Control register */
++#define		AT91_ECC_RST		(1 << 0) 		/* Reset parity */
++
++#define AT91_ECC_MR		(AT91_ECC + 0x04)	/* Mode register */
++#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
++#define			AT91_ECC_PAGESIZE_528		(0)
++#define			AT91_ECC_PAGESIZE_1056		(1)
++#define			AT91_ECC_PAGESIZE_2112		(2)
++#define			AT91_ECC_PAGESIZE_4224		(3)
++
++#define AT91_ECC_SR		(AT91_ECC + 0x08) 	/* Status register */
++#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
++#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
++#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
++
++#define AT91_ECC_PR		(AT91_ECC + 0x0c) 	/* Parity register */
++#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
++#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
++
++#define AT91_ECC_NPR		(AT91_ECC + 0x10) 	/* NParity register */
++#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_lcdc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_lcdc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_lcdc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_lcdc.h	Sat Nov 25 11:06:19 2006
+@@ -0,0 +1,148 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_lcdc.h
++ *
++ * LCD Controller (LCDC).
++ * Based on AT91SAM9261 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_LCDC_H
++#define AT91_LCDC_H
++
++#define AT91_LCDC_DMABADDR1	0x00		/* DMA Base Address Register 1 */
++#define AT91_LCDC_DMABADDR2	0x04		/* DMA Base Address Register 2 */
++#define AT91_LCDC_DMAFRMPT1	0x08		/* DMA Frame Pointer Register 1 */
++#define AT91_LCDC_DMAFRMPT2	0x0c		/* DMA Frame Pointer Register 2 */
++#define AT91_LCDC_DMAFRMADD1	0x10		/* DMA Frame Address Register 1 */
++#define AT91_LCDC_DMAFRMADD2	0x14		/* DMA Frame Address Register 2 */
++
++#define AT91_LCDC_DMAFRMCFG	0x18		/* DMA Frame Configuration Register */
++#define		AT91_LCDC_FRSIZE	(0x7fffff <<  0)	/* Frame Size */
++#define		AT91_LCDC_BLENGTH	(0x7f     << 24)	/* Burst Length */
++
++#define AT91_LCDC_DMACON	0x1c		/* DMA Control Register */
++#define		AT91_LCDC_DMAEN		(0x1 << 0)	/* DMA Enable */
++#define		AT91_LCDC_DMARST	(0x1 << 1)	/* DMA Reset */
++#define		AT91_LCDC_DMABUSY	(0x1 << 2)	/* DMA Busy */
++
++#define AT91_LCDC_LCDCON1	0x0800		/* LCD Control Register 1 */
++#define		AT91_LCDC_BYPASS	(1     <<  0)	/* Bypass lcd_dotck divider */
++#define		AT91_LCDC_CLKVAL	(0x1ff << 12)	/* Clock Divider */
++#define		AT91_LCDC_LINCNT	(0x7ff << 21)	/* Line Counter */
++
++#define AT91_LCDC_LCDCON2	0x0804		/* LCD Control Register 2 */
++#define		AT91_LCDC_DISTYPE	(3 << 0)	/* Display Type */
++#define			AT91_LCDC_DISTYPE_STNMONO	(0 << 0)
++#define			AT91_LCDC_DISTYPE_STNCOLOR	(1 << 0)
++#define			AT91_LCDC_DISTYPE_TFT		(2 << 0)
++#define		AT91_LCDC_SCANMOD	(1 << 2)	/* Scan Mode */
++#define			AT91_LCDC_SCANMOD_SINGLE	(0 << 2)
++#define			AT91_LCDC_SCANMOD_DUAL		(1 << 2)
++#define		AT91_LCDC_IFWIDTH	(3 << 3)	/*Interface Width */
++#define			AT91_LCDC_IFWIDTH_4		(0 << 3)
++#define			AT91_LCDC_IFWIDTH_8		(1 << 3)
++#define			AT91_LCDC_IFWIDTH_16		(2 << 3)
++#define		AT91_LCDC_PIXELSIZE	(7 << 5)	/* Bits per pixel */
++#define			AT91_LCDC_PIXELSIZE_1		(0 << 5)
++#define			AT91_LCDC_PIXELSIZE_2		(1 << 5)
++#define			AT91_LCDC_PIXELSIZE_4		(2 << 5)
++#define			AT91_LCDC_PIXELSIZE_8		(3 << 5)
++#define			AT91_LCDC_PIXELSIZE_16		(4 << 5)
++#define			AT91_LCDC_PIXELSIZE_24		(5 << 5)
++#define		AT91_LCDC_INVVD		(1 << 8)	/* LCD Data polarity */
++#define			AT91_LCDC_INVVD_NORMAL		(0 << 8)
++#define			AT91_LCDC_INVVD_INVERTED	(1 << 8)
++#define		AT91_LCDC_INVFRAME	(1 << 9 )	/* LCD VSync polarity */
++#define			AT91_LCDC_INVFRAME_NORMAL	(0 << 9)
++#define			AT91_LCDC_INVFRAME_INVERTED	(1 << 9)
++#define		AT91_LCDC_INVLINE	(1 << 10)	/* LCD HSync polarity */
++#define			AT91_LCDC_INVLINE_NORMAL	(0 << 10)
++#define			AT91_LCDC_INVLINE_INVERTED	(1 << 10)
++#define		AT91_LCDC_INVCLK	(1 << 11)	/* LCD dotclk polarity */
++#define			AT91_LCDC_INVCLK_NORMAL		(0 << 11)
++#define			AT91_LCDC_INVCLK_INVERTED	(1 << 11)
++#define		AT91_LCDC_INVDVAL	(1 << 12)	/* LCD dval polarity */
++#define			AT91_LCDC_INVDVAL_NORMAL	(0 << 12)
++#define			AT91_LCDC_INVDVAL_INVERTED	(1 << 12)
++#define		AT91_LCDC_CLKMOD	(1 << 15)	/* LCD dotclk mode */
++#define			AT91_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
++#define			AT91_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
++#define		AT91_LCDC_MEMOR		(1 << 31)	/* Memory Ordering Format */
++#define			AT91_LCDC_MEMOR_BIG		(0 << 31)
++#define			AT91_LCDC_MEMOR_LITTLE		(1 << 31)
++
++#define AT91_LCDC_TIM1		0x0808		/* LCD Timing Register 1 */
++#define		AT91_LCDC_VFP		(0xff <<  0)	/* Vertical Front Porch */
++#define		AT91_LCDC_VBP		(0xff <<  8)	/* Vertical Back Porch */
++#define		AT91_LCDC_VPW		(0x3f << 16)	/* Vertical Synchronization Pulse Width */
++#define		AT91_LCDC_VHDLY		(0xf  << 24)	/* Vertical to Horizontal Delay */
++
++#define AT91_LCDC_TIM2		0x080c		/* LCD Timing Register 2 */
++#define		AT91_LCDC_HBP		(0xff  <<  0)	/* Horizontal Back Porch */
++#define		AT91_LCDC_HPW		(0x3f  <<  8)	/* Horizontal Synchronization Pulse Width */
++#define		AT91_LCDC_HFP		(0x7ff << 21)	/* Horizontal Front Porch */
++
++#define AT91_LCDC_LCDFRMCFG	0x0810		/* LCD Frame Configuration Register */
++#define		AT91_LCDC_LINEVAL	(0x7ff <<  0)	/* Vertical Size of LCD Module */
++#define		AT91_LCDC_HOZVAL	(0x7ff << 21)	/* Horizontal Size of LCD Module */
++
++#define AT91_LCDC_FIFO		0x0814		/* LCD FIFO Register */
++#define		AT91_LCDC_FIFOTH	(0xffff)	/* FIFO Threshold */
++
++#define AT91_LCDC_DP1_2		0x081c		/* Dithering Pattern DP1_2 Register */
++#define AT91_LCDC_DP4_7		0x0820		/* Dithering Pattern DP4_7 Register */
++#define AT91_LCDC_DP3_5		0x0824		/* Dithering Pattern DP3_5 Register */
++#define AT91_LCDC_DP2_3		0x0828		/* Dithering Pattern DP2_3 Register */
++#define AT91_LCDC_DP5_7		0x082c		/* Dithering Pattern DP5_7 Register */
++#define AT91_LCDC_DP3_4		0x0830		/* Dithering Pattern DP3_4 Register */
++#define AT91_LCDC_DP4_5		0x0834		/* Dithering Pattern DP4_5 Register */
++#define AT91_LCDC_DP6_7		0x0838		/* Dithering Pattern DP6_7 Register */
++#define		AT91_LCDC_DP1_2_VAL	(0xff)
++#define		AT91_LCDC_DP4_7_VAL	(0xfffffff)
++#define		AT91_LCDC_DP3_5_VAL	(0xfffff)
++#define		AT91_LCDC_DP2_3_VAL	(0xfff)
++#define		AT91_LCDC_DP5_7_VAL	(0xfffffff)
++#define		AT91_LCDC_DP3_4_VAL	(0xffff)
++#define		AT91_LCDC_DP4_5_VAL	(0xfffff)
++#define		AT91_LCDC_DP6_7_VAL	(0xfffffff)
++
++#define AT91_LCDC_PWRCON	0x083c		/* Power Control Register */
++#define		AT91_LCDC_PWR		(1    <<  0)	/* LCD Module Power Control */
++#define		AT91_LCDC_GUARDT	(0x7f <<  1)	/* Delay in Frame Period */
++#define		AT91_LCDC_BUSY		(1    << 31)	/* LCD Busy */
++
++#define AT91_LCDC_CONTRAST_CTR	0x0840		/* Contrast Control Register */
++#define		AT91_LCDC_PS		(3 << 0)	/* Contrast Counter Prescaler */
++#define			AT91_LCDC_PS_DIV1		(0 << 0)
++#define			AT91_LCDC_PS_DIV2		(1 << 0)
++#define			AT91_LCDC_PS_DIV4		(2 << 0)
++#define			AT91_LCDC_PS_DIV8		(3 << 0)
++#define		AT91_LCDC_POL		(1 << 2)	/* Polarity of output Pulse */
++#define			AT91_LCDC_POL_NEGATIVE		(0 << 2)
++#define			AT91_LCDC_POL_POSITIVE		(1 << 2)
++#define		AT91_LCDC_ENA		(1 << 3)	/* PWM generator Control */
++#define			AT91_LCDC_ENA_PWMDISABLE	(0 << 3)
++#define			AT91_LCDC_ENA_PWMENABLE		(1 << 3)
++
++#define AT91_LCDC_CONTRAST_VAL	0x0844		/* Contrast Value Register */
++#define		AT91_LCDC_CVAL		(0xff)		/* PWM compare value */
++
++#define AT91_LCDC_IER		0x0848		/* Interrupt Enable Register */
++#define AT91_LCDC_IDR		0x084c		/* Interrupt Disable Register */
++#define AT91_LCDC_IMR		0x0850		/* Interrupt Mask Register */
++#define AT91_LCDC_ISR		0x0854		/* Interrupt Enable Register */
++#define AT91_LCDC_ICR		0x0858		/* Interrupt Clear Register */
++#define		AT91_LCDC_LNI		(1 << 0)	/* Line Interrupt */
++#define		AT91_LCDC_LSTLNI	(1 << 1)	/* Last Line Interrupt */
++#define		AT91_LCDC_EOFI		(1 << 2)	/* DMA End Of Frame Interrupt */
++#define		AT91_LCDC_UFLWI		(1 << 4)	/* FIFO Underflow Interrupt */
++#define		AT91_LCDC_OWRI		(1 << 5)	/* FIFO Overwrite Interrupt */
++#define		AT91_LCDC_MERI		(1 << 6)	/* DMA Memory Error Interrupt */
++
++#define AT91_LCDC_LUT_(n)	(0x0c00 + ((n)*4))	/* Palette Entry 0..255 */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_mci.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_mci.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_mci.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_mci.h	Mon Nov  6 12:20:14 2006
+@@ -0,0 +1,106 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_mci.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * MultiMedia Card Interface (MCI) registers.
++ * Based on AT91RM9200 datasheet revision F.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_MCI_H
++#define AT91_MCI_H
++
++#define AT91_MCI_CR		0x00		/* Control Register */
++#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
++#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
++#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
++#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
++#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
++
++#define AT91_MCI_MR		0x04		/* Mode Register */
++#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
++#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
++#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
++#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
++#define		AT91_MCI_BLKLEN 	(0xfff << 18)	/* Data Block Length */
++
++#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
++#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
++#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
++#define		AT91_MCI_DTOMUL_1		(0 <<  4)
++#define		AT91_MCI_DTOMUL_16		(1 <<  4)
++#define		AT91_MCI_DTOMUL_128		(2 <<  4)
++#define		AT91_MCI_DTOMUL_256		(3 <<  4)
++#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
++#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
++#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
++#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
++
++#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
++#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
++#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
++
++#define AT91_MCI_ARGR		0x10		/* Argument Register */
++
++#define AT91_MCI_CMDR		0x14		/* Command Register */
++#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
++#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
++#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
++#define			AT91_MCI_RSPTYP_48	(1 <<  6)
++#define			AT91_MCI_RSPTYP_136	(2 <<  6)
++#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
++#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
++#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
++#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
++#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
++#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
++#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
++#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
++#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
++#define			AT91_MCI_TRCMD_NONE	(0 << 16)
++#define			AT91_MCI_TRCMD_START	(1 << 16)
++#define			AT91_MCI_TRCMD_STOP	(2 << 16)
++#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
++#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
++#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
++#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
++#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
++
++#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
++#define AT91_MCR_RDR		0x30		/* Receive Data Register */
++#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
++
++#define AT91_MCI_SR		0x40		/* Status Register */
++#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
++#define		AT91_MCI_RXRDY		(1 <<  1) 	/* Receiver Ready */
++#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
++#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
++#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
++#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
++#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
++#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
++#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
++#define		At91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B [AT91RM9200 only] */
++#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
++#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
++#define		AT91_MCI_RINDE		(1 << 16)  	/* Response Index Error */
++#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
++#define		AT91_MCI_RCRCE		(1 << 18)   	/* Response CRC Error */
++#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
++#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
++#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
++#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
++#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
++#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
++
++#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
++#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
++#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pdc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pdc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pdc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pdc.h	Tue Oct 24 14:28:55 2006
+@@ -0,0 +1,36 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_pdc.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Peripheral Data Controller (PDC) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PDC_H
++#define AT91_PDC_H
++
++#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
++#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
++#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
++#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
++#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
++#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
++#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
++#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
++
++#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
++#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
++#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
++#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
++#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
++
++#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pio.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pio.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pio.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pio.h	Tue Oct 24 15:47:04 2006
+@@ -0,0 +1,49 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_pio.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Parallel I/O Controller (PIO) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PIO_H
++#define AT91_PIO_H
++
++#define PIO_PER		0x00	/* Enable Register */
++#define PIO_PDR		0x04	/* Disable Register */
++#define PIO_PSR		0x08	/* Status Register */
++#define PIO_OER		0x10	/* Output Enable Register */
++#define PIO_ODR		0x14	/* Output Disable Register */
++#define PIO_OSR		0x18	/* Output Status Register */
++#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
++#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
++#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
++#define PIO_SODR	0x30	/* Set Output Data Register */
++#define PIO_CODR	0x34	/* Clear Output Data Register */
++#define PIO_ODSR	0x38	/* Output Data Status Register */
++#define PIO_PDSR	0x3c	/* Pin Data Status Register */
++#define PIO_IER		0x40	/* Interrupt Enable Register */
++#define PIO_IDR		0x44	/* Interrupt Disable Register */
++#define PIO_IMR		0x48	/* Interrupt Mask Register */
++#define PIO_ISR		0x4c	/* Interrupt Status Register */
++#define PIO_MDER	0x50	/* Multi-driver Enable Register */
++#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
++#define PIO_MDSR	0x58	/* Multi-driver Status Register */
++#define PIO_PUDR	0x60	/* Pull-up Disable Register */
++#define PIO_PUER	0x64	/* Pull-up Enable Register */
++#define PIO_PUSR	0x68	/* Pull-up Status Register */
++#define PIO_ASR		0x70	/* Peripheral A Select Register */
++#define PIO_BSR		0x74	/* Peripheral B Select Register */
++#define PIO_ABSR	0x78	/* AB Status Register */
++#define PIO_OWER	0xa0	/* Output Write Enable Register */
++#define PIO_OWDR	0xa4	/* Output Write Disable Register */
++#define PIO_OWSR	0xa8	/* Output Write Status Register */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pit.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pit.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pit.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pit.h	Thu Nov  9 15:09:54 2006
+@@ -0,0 +1,29 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_pit.h
++ *
++ * Periodic Interval Timer (PIT) - System peripherals regsters.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PIT_H
++#define AT91_PIT_H
++
++#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
++#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
++#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
++#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
++
++#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
++#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
++
++#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
++#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
++#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
++#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pmc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pmc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_pmc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_pmc.h	Thu Nov  9 09:03:41 2006
+@@ -0,0 +1,92 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_pmc.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Power Management Controller (PMC) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PMC_H
++#define AT91_PMC_H
++
++#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
++#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
++
++#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
++#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
++#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
++#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
++#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
++#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
++#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
++#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
++#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
++#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
++#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
++#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
++#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
++
++#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
++#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
++#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
++
++#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
++#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
++#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
++#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
++
++#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
++#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
++#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
++
++#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
++#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
++#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
++#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
++#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
++#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
++#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
++
++#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
++#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
++#define			AT91_PMC_CSS_SLOW		(0 << 0)
++#define			AT91_PMC_CSS_MAIN		(1 << 0)
++#define			AT91_PMC_CSS_PLLA		(2 << 0)
++#define			AT91_PMC_CSS_PLLB		(3 << 0)
++#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
++#define 		AT91_PMC_PRES_1			(0 << 2)
++#define			AT91_PMC_PRES_2			(1 << 2)
++#define			AT91_PMC_PRES_4			(2 << 2)
++#define			AT91_PMC_PRES_8			(3 << 2)
++#define			AT91_PMC_PRES_16		(4 << 2)
++#define			AT91_PMC_PRES_32		(5 << 2)
++#define			AT91_PMC_PRES_64		(6 << 2)
++#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
++#define			AT91_PMC_MDIV_1			(0 << 8)
++#define			AT91_PMC_MDIV_2			(1 << 8)
++#define			AT91_PMC_MDIV_3			(2 << 8)
++#define			AT91_PMC_MDIV_4			(3 << 8)
++
++#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
++
++#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
++#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
++#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
++#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
++#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
++#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
++#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
++#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
++#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
++#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
++#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
++#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_rstc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_rstc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_rstc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_rstc.h	Thu Nov  2 15:59:35 2006
+@@ -0,0 +1,39 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_rstc.h
++ *
++ * Reset Controller (RSTC) - System peripherals regsters.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_RSTC_H
++#define AT91_RSTC_H
++
++#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
++#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
++#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
++#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
++#define		AT01_RSTC_KEY		(0xff << 24)		/* KEY Password */
++
++#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
++#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
++#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
++#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
++#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
++#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
++#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
++#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
++#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
++#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
++
++#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
++#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
++#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
++#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
++#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_rtc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_rtc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_rtc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_rtc.h	Tue Oct 24 15:41:59 2006
+@@ -0,0 +1,75 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_rtc.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Real Time Clock (RTC) - System peripheral registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_RTC_H
++#define AT91_RTC_H
++
++#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
++#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
++#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
++#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
++#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
++#define 		AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
++#define 		AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
++#define 		AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
++#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
++#define 		AT91_RTC_CALEVSEL_WEEK		(0 << 16)
++#define 		AT91_RTC_CALEVSEL_MONTH		(1 << 16)
++#define 		AT91_RTC_CALEVSEL_YEAR		(2 << 16)
++
++#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
++#define 	AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
++
++#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
++#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
++#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
++#define		AT91_RTC_HOUR 		(0x3f << 16)		/* Current Hour */
++#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
++
++#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
++#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
++#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
++#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
++#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
++#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
++
++#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
++#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
++#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
++#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
++
++#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
++#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
++#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
++
++#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
++#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
++#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
++#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
++#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
++#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
++
++#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
++#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
++#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
++#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
++
++#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
++#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
++#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
++#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
++#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_rtt.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_rtt.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_rtt.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_rtt.h	Thu Nov  9 15:09:30 2006
+@@ -0,0 +1,32 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_rtt.h
++ *
++ * Real-time Timer (RTT) - System peripherals regsters.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_RTT_H
++#define AT91_RTT_H
++
++#define AT91_RTT_MR		(AT91_RTT + 0x00)	/* Real-time Mode Register */
++#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
++#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
++#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
++#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
++
++#define AT91_RTT_AR		(AT91_RTT + 0x04)	/* Real-time Alarm Register */
++#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
++
++#define AT91_RTT_VR		(AT91_RTT + 0x08)	/* Real-time Value Register */
++#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
++
++#define AT91_RTT_SR		(AT91_RTT + 0x0c)	/* Real-time Status Register */
++#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
++#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_shdwc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_shdwc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_shdwc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_shdwc.h	Thu Nov  9 15:08:30 2006
+@@ -0,0 +1,33 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_shdwc.h
++ *
++ * Shutdown Controller (SHDWC) - System peripherals regsters.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_SHDWC_H
++#define AT91_SHDWC_H
++
++#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
++#define		AT91_SHDW_SHDW		(1    << 0)		/* Processor Reset */
++#define		AT91_SHDW_KEY		(0xff << 24)		/* KEY Password */
++
++#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
++#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
++#define			AT91_SHDW_WKMODE0_NONE		0
++#define			AT91_SHDW_WKMODE0_HIGH		1
++#define			AT91_SHDW_WKMODE0_LOW		2
++#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
++#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
++#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
++
++#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
++#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
++#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_spi.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_spi.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_spi.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_spi.h	Wed Nov 15 16:58:25 2006
+@@ -0,0 +1,81 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_spi.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Serial Peripheral Interface (SPI) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_SPI_H
++#define AT91_SPI_H
++
++#define AT91_SPI_CR			0x00		/* Control Register */
++#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
++#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
++#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
++#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
++
++#define AT91_SPI_MR			0x04		/* Mode Register */
++#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
++#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
++#define			AT91_SPI_PS_FIXED	(0 << 1)
++#define			AT91_SPI_PS_VARIABLE	(1 << 1)
++#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
++#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
++#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
++#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
++#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
++#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
++
++#define AT91_SPI_RDR		0x08			/* Receive Data Register */
++#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
++#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
++
++#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
++#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
++#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
++#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
++
++#define AT91_SPI_SR		0x10			/* Status Register */
++#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
++#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
++#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
++#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
++#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
++#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
++#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
++#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
++#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
++#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
++#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
++
++#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
++#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
++#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
++
++#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
++#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
++#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
++#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
++#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
++#define			AT91_SPI_BITS_8		(0 << 4)
++#define			AT91_SPI_BITS_9		(1 << 4)
++#define			AT91_SPI_BITS_10	(2 << 4)
++#define			AT91_SPI_BITS_11	(3 << 4)
++#define			AT91_SPI_BITS_12	(4 << 4)
++#define			AT91_SPI_BITS_13	(5 << 4)
++#define			AT91_SPI_BITS_14	(6 << 4)
++#define			AT91_SPI_BITS_15	(7 << 4)
++#define			AT91_SPI_BITS_16	(8 << 4)
++#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
++#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
++#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_ssc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_ssc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_ssc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_ssc.h	Mon Nov  6 12:40:23 2006
+@@ -0,0 +1,106 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_ssc.h
++ *
++ * Copyright (C) SAN People
++ *
++ * Serial Synchronous Controller (SSC) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_SSC_H
++#define AT91_SSC_H
++
++#define AT91_SSC_CR		0x00	/* Control Register */
++#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
++#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
++#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
++#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
++#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
++
++#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
++#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
++
++#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
++#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
++#define			AT91_SSC_CKS_DIV		(0 << 0)
++#define			AT91_SSC_CKS_CLOCK		(1 << 0)
++#define			AT91_SSC_CKS_PIN		(2 << 0)
++#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
++#define			AT91_SSC_CKO_NONE		(0 << 2)
++#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
++#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
++#define			AT91_SSC_CKI_FALLING		(0 << 5)
++#define			AT91_SSC_CK_RISING		(1 << 5)
++#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
++#define			AT91_SSC_CKG_NONE		(0 << 6)
++#define			AT91_SSC_CKG_RFLOW		(1 << 6)
++#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
++#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
++#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
++#define			AT91_SSC_START_TX_RX		(1 << 8)
++#define			AT91_SSC_START_LOW_RF		(2 << 8)
++#define			AT91_SSC_START_HIGH_RF		(3 << 8)
++#define			AT91_SSC_START_FALLING_RF	(4 << 8)
++#define			AT91_SSC_START_RISING_RF	(5 << 8)
++#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
++#define			AT91_SSC_START_EDGE_RF		(7 << 8)
++#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
++#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
++#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
++
++#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
++#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
++#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
++#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
++#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
++#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
++#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
++#define			AT91_SSC_FSOS_NONE		(0 << 20)
++#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
++#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
++#define			AT91_SSC_FSOS_LOW		(3 << 20)
++#define			AT91_SSC_FSOS_HIGH		(4 << 20)
++#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
++#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
++#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
++#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
++
++#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
++#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
++#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
++#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
++
++#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
++#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
++#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
++#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
++
++#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
++#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
++
++#define AT91_SSC_SR		0x40	/* Status Register */
++#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
++#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
++#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
++#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
++#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
++#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
++#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
++#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
++#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
++#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */  
++#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
++#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
++#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
++#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
++
++#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
++#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
++#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_st.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_st.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_st.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_st.h	Tue Oct 24 17:15:02 2006
+@@ -0,0 +1,49 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_st.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * System Timer (ST) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_ST_H
++#define AT91_ST_H
++
++#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
++#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
++
++#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
++#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
++
++#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
++#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
++#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
++#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
++
++#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
++#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
++
++#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
++#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
++#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
++#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
++#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
++
++#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
++#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
++#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
++
++#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
++#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
++
++#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
++#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_tc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_tc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_tc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_tc.h	Tue Oct 24 15:21:53 2006
+@@ -0,0 +1,146 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_tc.h
++ *
++ * Copyright (C) SAN People
++ *
++ * Timer/Counter Unit (TC) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_TC_H
++#define AT91_TC_H
++
++#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
++#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
++
++#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
++#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
++#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
++#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
++#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
++#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
++#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
++#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
++#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
++#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
++#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
++#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
++#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
++#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
++#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
++#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
++
++
++#define AT91_TC_CCR		0x00		/* Channel Control Register */
++#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
++#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
++#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
++
++#define AT91_TC_CMR		0x04		/* Channel Mode Register */
++#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
++#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
++#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
++#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
++#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
++#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
++#define			AT91_TC_XC0			(5 << 0)
++#define			AT91_TC_XC1			(6 << 0)
++#define			AT91_TC_XC2			(7 << 0)
++#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
++#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
++#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
++#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
++#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
++#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
++#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
++#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
++#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
++#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
++
++#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
++#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
++#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
++#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
++#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
++#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
++#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
++#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
++#define			AT91_TC_EEVT_TIOB		(0 << 10)
++#define			AT91_TC_EEVT_XC0		(1 << 10)
++#define			AT91_TC_EEVT_XC1		(2 << 10)
++#define			AT91_TC_EEVT_XC2		(3 << 10)
++#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
++#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
++#define			AT91_TC_WAVESEL_UP		(0 << 13)
++#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
++#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
++#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
++#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
++#define			AT91_TC_ACPA_NONE		(0 << 16)
++#define			AT91_TC_ACPA_SET		(1 << 16)
++#define			AT91_TC_ACPA_CLEAR		(2 << 16)
++#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
++#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
++#define			AT91_TC_ACPC_NONE		(0 << 18)
++#define			AT91_TC_ACPC_SET		(1 << 18)
++#define			AT91_TC_ACPC_CLEAR		(2 << 18)
++#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
++#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
++#define			AT91_TC_AEEVT_NONE		(0 << 20)
++#define			AT91_TC_AEEVT_SET		(1 << 20)
++#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
++#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
++#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
++#define			AT91_TC_ASWTRG_NONE		(0 << 22)
++#define			AT91_TC_ASWTRG_SET		(1 << 22)
++#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
++#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
++#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
++#define			AT91_TC_BCPB_NONE		(0 << 24)
++#define			AT91_TC_BCPB_SET		(1 << 24)
++#define			AT91_TC_BCPB_CLEAR		(2 << 24)
++#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
++#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
++#define			AT91_TC_BCPC_NONE		(0 << 26)
++#define			AT91_TC_BCPC_SET		(1 << 26)
++#define			AT91_TC_BCPC_CLEAR		(2 << 26)
++#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
++#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
++#define			AT91_TC_BEEVT_NONE		(0 << 28)
++#define			AT91_TC_BEEVT_SET		(1 << 28)
++#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
++#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
++#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
++#define			AT91_TC_BSWTRG_NONE		(0 << 30)
++#define			AT91_TC_BSWTRG_SET		(1 << 30)
++#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
++#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
++
++#define AT91_TC_CV		0x10		/* Counter Value */
++#define AT91_TC_RA		0x14		/* Register A */
++#define AT91_TC_RB		0x18		/* Register B */
++#define AT91_TC_RC		0x1c		/* Register C */
++
++#define AT91_TC_SR		0x20		/* Status Register */
++#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
++#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
++#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
++#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
++#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
++#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
++#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
++#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
++#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
++#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
++#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
++
++#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
++#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
++#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_twi.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_twi.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_twi.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_twi.h	Thu Nov  2 16:46:07 2006
+@@ -0,0 +1,57 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_twi.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Two-wire Interface (TWI) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_TWI_H
++#define AT91_TWI_H
++
++#define	AT91_TWI_CR		0x00		/* Control Register */
++#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
++#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
++#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
++#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
++#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
++
++#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
++#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
++#define			AT91_TWI_IADRSZ_NO		(0 << 8)
++#define			AT91_TWI_IADRSZ_1		(1 << 8)
++#define			AT91_TWI_IADRSZ_2		(2 << 8)
++#define			AT91_TWI_IADRSZ_3		(3 << 8)
++#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
++#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
++
++#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
++
++#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
++#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
++#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
++#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
++
++#define	AT91_TWI_SR		0x20		/* Status Register */
++#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
++#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
++#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
++#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
++#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
++#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
++
++#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
++#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
++#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
++#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
++#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
++
++#endif
++
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_wdt.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_wdt.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91_wdt.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91_wdt.h	Thu Nov  9 15:10:16 2006
+@@ -0,0 +1,34 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_wdt.h
++ *
++ * Watchdog Timer (WDT) - System peripherals regsters.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_WDT_H
++#define AT91_WDT_H
++
++#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
++#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
++#define		AT91_WDT_KEY		(0xff << 24)		/* KEY Password */
++
++#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
++#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
++#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
++#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
++#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
++#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
++#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
++#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
++#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
++
++#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
++#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
++#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200.h	Mon Dec  4 16:41:04 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200.h	Fri Nov 10 09:25:26 2006
+@@ -80,6 +80,22 @@
+ 
+ 
+ /*
++ * System Peripherals (offset from AT91_BASE_SYS)
++ */
++#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
++#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
++#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
++#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
++#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
++#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
++#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
++#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
++#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
++#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
++
++#define AT91_MATRIX	0	/* not supported */
++
++/*
+  * Internal Memory.
+  */
+ #define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h	Thu Nov  2 16:54:12 2006
+@@ -0,0 +1,160 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91RM9200_MC_H
++#define AT91RM9200_MC_H
++
++/* Memory Controller */
++#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
++#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
++
++#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
++#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
++#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
++#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
++#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
++#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
++#define			AT91_MC_ABTSZ_WORD		(2 << 8)
++#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
++#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
++#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
++#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
++#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
++#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
++#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
++#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
++#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
++#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
++#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
++#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
++
++#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
++
++#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
++#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
++#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
++#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
++#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
++
++/* External Bus Interface (EBI) registers */
++#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
++#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
++#define			AT91_EBI_CS0A_SMC		(0 << 0)
++#define			AT91_EBI_CS0A_BFC		(1 << 0)
++#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
++#define			AT91_EBI_CS1A_SMC		(0 << 1)
++#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
++#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
++#define			AT91_EBI_CS3A_SMC		(0 << 3)
++#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
++#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
++#define			AT91_EBI_CS4A_SMC		(0 << 4)
++#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
++#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
++#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
++
++/* Static Memory Controller (SMC) registers */
++#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
++#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
++#define			AT91_SMC_NWS_(x)	((x) << 0)
++#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
++#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
++#define			AT91_SMC_TDF_(x)	((x) << 8)
++#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
++#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
++#define			AT91_SMC_DBW_16		(1 << 13)
++#define			AT91_SMC_DBW_8		(2 << 13)
++#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
++#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
++#define			AT91_SMC_ACSS_STD	(0 << 16)
++#define			AT91_SMC_ACSS_1		(1 << 16)
++#define			AT91_SMC_ACSS_2		(2 << 16)
++#define			AT91_SMC_ACSS_3		(3 << 16)
++#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
++#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
++#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
++#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
++
++/* SDRAM Controller registers */
++#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
++#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
++#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
++#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
++#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
++#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
++#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
++#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
++#define			AT91_SDRAMC_DBW_32	(0 << 4)
++#define			AT91_SDRAMC_DBW_16	(1 << 4)
++
++#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
++#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
++
++#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
++#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
++#define			AT91_SDRAMC_NC_8	(0 << 0)
++#define			AT91_SDRAMC_NC_9	(1 << 0)
++#define			AT91_SDRAMC_NC_10	(2 << 0)
++#define			AT91_SDRAMC_NC_11	(3 << 0)
++#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
++#define			AT91_SDRAMC_NR_11	(0 << 2)
++#define			AT91_SDRAMC_NR_12	(1 << 2)
++#define			AT91_SDRAMC_NR_13	(2 << 2)
++#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
++#define			AT91_SDRAMC_NB_2	(0 << 4)
++#define			AT91_SDRAMC_NB_4	(1 << 4)
++#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
++#define			AT91_SDRAMC_CAS_2	(2 << 5)
++#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
++#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
++#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
++#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
++#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
++#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
++
++#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
++#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
++#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
++#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
++#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
++#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
++
++/* Burst Flash Controller register */
++#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
++#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
++#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
++#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
++#define			AT91_BFC_BFCOM_BURST	(2 << 0)
++#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
++#define			AT91_BFC_BFCC_MCK	(1 << 2)
++#define			AT91_BFC_BFCC_DIV2	(2 << 2)
++#define			AT91_BFC_BFCC_DIV4	(3 << 2)
++#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
++#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
++#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
++#define			AT91_BFC_PAGES_16	(1 << 8)
++#define			AT91_BFC_PAGES_32	(2 << 8)
++#define			AT91_BFC_PAGES_64	(3 << 8)
++#define			AT91_BFC_PAGES_128	(4 << 8)
++#define			AT91_BFC_PAGES_256	(5 << 8)
++#define			AT91_BFC_PAGES_512	(6 << 8)
++#define			AT91_BFC_PAGES_1024	(7 << 8)
++#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
++#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
++#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
++#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
++#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h	Mon Dec  4 16:29:13 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h	Thu Jan  1 02:00:00 1970
+@@ -1,104 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_mci.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * MultiMedia Card Interface (MCI) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_MCI_H
+-#define AT91RM9200_MCI_H
+-
+-#define AT91_MCI_CR		0x00		/* Control Register */
+-#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
+-#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
+-#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
+-#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
+-#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
+-
+-#define AT91_MCI_MR		0x04		/* Mode Register */
+-#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
+-#define		AT91_MCI_PWSDIV		(3     <<  8)	/* Power Saving Divider */
+-#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
+-#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
+-#define		AT91_MCI_BLKLEN 	(0xfff << 18)	/* Data Block Length */
+-
+-#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
+-#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
+-#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
+-#define		AT91_MCI_DTOMUL_1		(0 <<  4)
+-#define		AT91_MCI_DTOMUL_16		(1 <<  4)
+-#define		AT91_MCI_DTOMUL_128		(2 <<  4)
+-#define		AT91_MCI_DTOMUL_256		(3 <<  4)
+-#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
+-#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
+-#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
+-#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
+-
+-#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
+-#define		AT91_MCI_SDCSEL		(0xf << 0)	/* SD Card Selector */
+-#define		AT91_MCI_SDCBUS		(1   << 7)	/* 1-bit or 4-bit bus */
+-
+-#define AT91_MCI_ARGR		0x10		/* Argument Register */
+-
+-#define AT91_MCI_CMDR		0x14		/* Command Register */
+-#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
+-#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
+-#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
+-#define			AT91_MCI_RSPTYP_48	(1 <<  6)
+-#define			AT91_MCI_RSPTYP_136	(2 <<  6)
+-#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
+-#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
+-#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
+-#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
+-#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
+-#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
+-#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
+-#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
+-#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
+-#define			AT91_MCI_TRCMD_NONE	(0 << 16)
+-#define			AT91_MCI_TRCMD_START	(1 << 16)
+-#define			AT91_MCI_TRCMD_STOP	(2 << 16)
+-#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
+-#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
+-#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
+-#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
+-#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+-
+-#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
+-#define AT91_MCR_RDR		0x30		/* Receive Data Register */
+-#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
+-
+-#define AT91_MCI_SR		0x40		/* Status Register */
+-#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
+-#define		AT91_MCI_RXRDY		(1 <<  1) 	/* Receiver Ready */
+-#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
+-#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
+-#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
+-#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
+-#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
+-#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
+-#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
+-#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
+-#define		AT91_MCI_RINDE		(1 << 16)  	/* Response Index Error */
+-#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
+-#define		AT91_MCI_RCRCE		(1 << 18)   	/* Response CRC Error */
+-#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
+-#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
+-#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
+-#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
+-#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
+-#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
+-
+-#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
+-#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
+-#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h	Tue May 30 11:42:13 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h	Thu Jan  1 02:00:00 1970
+@@ -1,36 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * Peripheral Data Controller (PDC) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_PDC_H
+-#define AT91RM9200_PDC_H
+-
+-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
+-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
+-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
+-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
+-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
+-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
+-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
+-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
+-
+-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
+-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
+-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
+-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
+-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
+-
+-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h	Thu Jan  1 02:00:00 1970
+@@ -1,81 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * Serial Peripheral Interface (SPI) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_SPI_H
+-#define AT91RM9200_SPI_H
+-
+-#define AT91_SPI_CR			0x00		/* Control Register */
+-#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+-#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+-#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+-#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+-
+-#define AT91_SPI_MR			0x04		/* Mode Register */
+-#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+-#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+-#define			AT91_SPI_PS_FIXED	(0 << 1)
+-#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+-#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+-#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection */
+-#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+-#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+-#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+-#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+-
+-#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+-#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+-
+-#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+-#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+-#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+-
+-#define AT91_SPI_SR		0x10			/* Status Register */
+-#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+-#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+-#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+-#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+-#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+-#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+-#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+-#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+-#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+-#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+-#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+-
+-#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+-#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+-#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+-
+-#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+-#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+-#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+-#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+-#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+-#define			AT91_SPI_BITS_8		(0 << 4)
+-#define			AT91_SPI_BITS_9		(1 << 4)
+-#define			AT91_SPI_BITS_10	(2 << 4)
+-#define			AT91_SPI_BITS_11	(3 << 4)
+-#define			AT91_SPI_BITS_12	(4 << 4)
+-#define			AT91_SPI_BITS_13	(5 << 4)
+-#define			AT91_SPI_BITS_14	(6 << 4)
+-#define			AT91_SPI_BITS_15	(7 << 4)
+-#define			AT91_SPI_BITS_16	(8 << 4)
+-#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+-#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+-#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h	Thu Jan  1 02:00:00 1970
+@@ -1,96 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
+- *
+- * Copyright (C) SAN People
+- *
+- * Serial Synchronous Controller (SSC) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_SSC_H
+-#define AT91RM9200_SSC_H
+-
+-#define AT91_SSC_CR		0x00	/* Control Register */
+-#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
+-#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
+-#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
+-#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
+-#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
+-
+-#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
+-#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
+-
+-#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
+-#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
+-#define			AT91_SSC_CKS_DIV		(0 << 0)
+-#define			AT91_SSC_CKS_CLOCK		(1 << 0)
+-#define			AT91_SSC_CKS_PIN		(2 << 0)
+-#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
+-#define			AT91_SSC_CKO_NONE		(0 << 2)
+-#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
+-#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
+-#define			AT91_SSC_CKI_FALLING		(0 << 5)
+-#define			AT91_SSC_CK_RISING		(1 << 5)
+-#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
+-#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
+-#define			AT91_SSC_START_TX_RX		(1 << 8)
+-#define			AT91_SSC_START_LOW_RF		(2 << 8)
+-#define			AT91_SSC_START_HIGH_RF		(3 << 8)
+-#define			AT91_SSC_START_FALLING_RF	(4 << 8)
+-#define			AT91_SSC_START_RISING_RF	(5 << 8)
+-#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
+-#define			AT91_SSC_START_EDGE_RF		(7 << 8)
+-#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
+-#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
+-
+-#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
+-#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
+-#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
+-#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
+-#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
+-#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
+-#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
+-#define			AT91_SSC_FSOS_NONE		(0 << 20)
+-#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
+-#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
+-#define			AT91_SSC_FSOS_LOW		(3 << 20)
+-#define			AT91_SSC_FSOS_HIGH		(4 << 20)
+-#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
+-#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
+-#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
+-#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
+-
+-#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
+-#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
+-#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
+-#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
+-
+-#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
+-#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
+-#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
+-#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
+-
+-#define AT91_SSC_SR		0x40	/* Status Register */
+-#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
+-#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
+-#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
+-#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
+-#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
+-#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
+-#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
+-#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
+-#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
+-#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
+-#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
+-#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
+-
+-#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
+-#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
+-#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h	Mon Dec  4 16:41:04 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h	Thu Jan  1 02:00:00 1970
+@@ -1,438 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * System peripherals registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_SYS_H
+-#define AT91RM9200_SYS_H
+-
+-/*
+- * Advanced Interrupt Controller.
+- */
+-#define AT91_AIC	0x000
+-
+-#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
+-#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
+-#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
+-#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
+-#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
+-#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
+-#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
+-
+-#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
+-#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
+-#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
+-#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
+-#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
+-
+-#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
+-#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
+-#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
+-#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
+-#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
+-
+-#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
+-#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
+-#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
+-#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
+-#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
+-#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
+-#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
+-#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
+-#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
+-
+-
+-/*
+- * Debug Unit.
+- */
+-#define AT91_DBGU	0x200
+-
+-#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
+-#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
+-#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
+-#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
+-#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
+-#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
+-#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
+-#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
+-#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
+-#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
+-#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+-
+-#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
+-#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
+-#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
+-#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
+-#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
+-#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
+-#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+-#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
+-#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
+-#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
+-
+-#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
+-#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
+-#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
+-
+-/*
+- * PIO Controllers.
+- */
+-#define AT91_PIOA	0x400
+-#define AT91_PIOB	0x600
+-#define AT91_PIOC	0x800
+-#define AT91_PIOD	0xa00
+-
+-#define PIO_PER		0x00	/* Enable Register */
+-#define PIO_PDR		0x04	/* Disable Register */
+-#define PIO_PSR		0x08	/* Status Register */
+-#define PIO_OER		0x10	/* Output Enable Register */
+-#define PIO_ODR		0x14	/* Output Disable Register */
+-#define PIO_OSR		0x18	/* Output Status Register */
+-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+-#define PIO_SODR	0x30	/* Set Output Data Register */
+-#define PIO_CODR	0x34	/* Clear Output Data Register */
+-#define PIO_ODSR	0x38	/* Output Data Status Register */
+-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+-#define PIO_IER		0x40	/* Interrupt Enable Register */
+-#define PIO_IDR		0x44	/* Interrupt Disable Register */
+-#define PIO_IMR		0x48	/* Interrupt Mask Register */
+-#define PIO_ISR		0x4c	/* Interrupt Status Register */
+-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+-#define PIO_PUER	0x64	/* Pull-up Enable Register */
+-#define PIO_PUSR	0x68	/* Pull-up Status Register */
+-#define PIO_ASR		0x70	/* Peripheral A Select Register */
+-#define PIO_BSR		0x74	/* Peripheral B Select Register */
+-#define PIO_ABSR	0x78	/* AB Status Register */
+-#define PIO_OWER	0xa0	/* Output Write Enable Register */
+-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+-#define PIO_OWSR	0xa8	/* Output Write Status Register */
+-
+-#define AT91_PIO_P(n)	(1 << (n))
+-
+-
+-/*
+- * Power Management Controller.
+- */
+-#define	AT91_PMC	0xc00
+-
+-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+-
+-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+-#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+-#define		AT91_PMC_UDP		(1 <<  1)		/* USB Devcice Port Clock */
+-#define		AT91_PMC_MCKUDP		(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend */
+-#define		AT91_PMC_UHP		(1 <<  4)		/* USB Host Port Clock */
+-#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+-#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+-#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+-#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+-
+-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+-
+-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
+-#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+-#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+-
+-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+-#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+-#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+-
+-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+-#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+-#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+-#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+-#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+-#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+-
+-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+-#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+-#define			AT91_PMC_CSS_SLOW		(0 << 0)
+-#define			AT91_PMC_CSS_MAIN		(1 << 0)
+-#define			AT91_PMC_CSS_PLLA		(2 << 0)
+-#define			AT91_PMC_CSS_PLLB		(3 << 0)
+-#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+-#define 		AT91_PMC_PRES_1			(0 << 2)
+-#define			AT91_PMC_PRES_2			(1 << 2)
+-#define			AT91_PMC_PRES_4			(2 << 2)
+-#define			AT91_PMC_PRES_8			(3 << 2)
+-#define			AT91_PMC_PRES_16		(4 << 2)
+-#define			AT91_PMC_PRES_32		(5 << 2)
+-#define			AT91_PMC_PRES_64		(6 << 2)
+-#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+-#define			AT91_PMC_MDIV_1			(0 << 8)
+-#define			AT91_PMC_MDIV_2			(1 << 8)
+-#define			AT91_PMC_MDIV_3			(2 << 8)
+-#define			AT91_PMC_MDIV_4			(3 << 8)
+-
+-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+-
+-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+-#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+-#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+-#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+-#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+-#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+-#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+-#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+-#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+-
+-
+-/*
+- * System Timer.
+- */
+-#define	AT91_ST		0xd00
+-
+-#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
+-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
+-#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
+-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
+-#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
+-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
+-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
+-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
+-#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
+-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
+-#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
+-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
+-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
+-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
+-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
+-#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
+-#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
+-#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
+-#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
+-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
+-#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
+-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
+-
+-
+-/*
+- * Real-time Clock.
+- */
+-#define	AT91_RTC	0xe00
+-
+-#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
+-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
+-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
+-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
+-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
+-#define 		AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+-#define 		AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+-#define 		AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
+-#define 		AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+-#define 		AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+-#define 		AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+-
+-#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
+-#define 	AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+-
+-#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
+-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+-#define		AT91_RTC_HOUR 		(0x3f << 16)		/* Current Hour */
+-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+-
+-#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
+-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
+-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+-
+-#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
+-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
+-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
+-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+-
+-#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
+-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+-
+-#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
+-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
+-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+-
+-#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
+-#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
+-#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
+-#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
+-
+-#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
+-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
+-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
+-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
+-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
+-
+-
+-/*
+- * Memory Controller.
+- */
+-#define AT91_MC		0xf00
+-
+-#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
+-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
+-
+-#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
+-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
+-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
+-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
+-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
+-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
+-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
+-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
+-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
+-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
+-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
+-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
+-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
+-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
+-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
+-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
+-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
+-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
+-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
+-
+-#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
+-
+-#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
+-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
+-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
+-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
+-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
+-
+-/* External Bus Interface (EBI) registers */
+-#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
+-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
+-#define			AT91_EBI_CS0A_SMC		(0 << 0)
+-#define			AT91_EBI_CS0A_BFC		(1 << 0)
+-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
+-#define			AT91_EBI_CS1A_SMC		(0 << 1)
+-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
+-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
+-#define			AT91_EBI_CS3A_SMC		(0 << 3)
+-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
+-#define			AT91_EBI_CS4A_SMC		(0 << 4)
+-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
+-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
+-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
+-
+-/* Static Memory Controller (SMC) registers */
+-#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
+-#define			AT91_SMC_NWS_(x)	((x) << 0)
+-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
+-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
+-#define			AT91_SMC_TDF_(x)	((x) << 8)
+-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
+-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
+-#define			AT91_SMC_DBW_16		(1 << 13)
+-#define			AT91_SMC_DBW_8		(2 << 13)
+-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
+-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
+-#define			AT91_SMC_ACSS_STD	(0 << 16)
+-#define			AT91_SMC_ACSS_1		(1 << 16)
+-#define			AT91_SMC_ACSS_2		(2 << 16)
+-#define			AT91_SMC_ACSS_3		(3 << 16)
+-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
+-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
+-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
+-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
+-
+-/* SDRAM Controller registers */
+-#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
+-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+-#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
+-#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
+-#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
+-#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
+-#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
+-#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
+-#define			AT91_SDRAMC_DBW_32	(0 << 4)
+-#define			AT91_SDRAMC_DBW_16	(1 << 4)
+-
+-#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
+-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
+-
+-#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
+-#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
+-#define			AT91_SDRAMC_NC_8	(0 << 0)
+-#define			AT91_SDRAMC_NC_9	(1 << 0)
+-#define			AT91_SDRAMC_NC_10	(2 << 0)
+-#define			AT91_SDRAMC_NC_11	(3 << 0)
+-#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
+-#define			AT91_SDRAMC_NR_11	(0 << 2)
+-#define			AT91_SDRAMC_NR_12	(1 << 2)
+-#define			AT91_SDRAMC_NR_13	(2 << 2)
+-#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
+-#define			AT91_SDRAMC_NB_2	(0 << 4)
+-#define			AT91_SDRAMC_NB_4	(1 << 4)
+-#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
+-#define			AT91_SDRAMC_CAS_2	(2 << 5)
+-#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
+-#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
+-#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
+-#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
+-#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
+-#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
+-
+-#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
+-#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
+-#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
+-#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
+-#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
+-#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
+-
+-/* Burst Flash Controller register */
+-#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
+-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
+-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
+-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
+-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
+-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
+-#define			AT91_BFC_BFCC_MCK	(1 << 2)
+-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
+-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
+-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
+-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
+-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
+-#define			AT91_BFC_PAGES_16	(1 << 8)
+-#define			AT91_BFC_PAGES_32	(2 << 8)
+-#define			AT91_BFC_PAGES_64	(3 << 8)
+-#define			AT91_BFC_PAGES_128	(4 << 8)
+-#define			AT91_BFC_PAGES_256	(5 << 8)
+-#define			AT91_BFC_PAGES_512	(6 << 8)
+-#define			AT91_BFC_PAGES_1024	(7 << 8)
+-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
+-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
+-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
+-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
+-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h	Thu Jan  1 02:00:00 1970
+@@ -1,146 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
+- *
+- * Copyright (C) SAN People
+- *
+- * Timer/Counter Unit (TC) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_TC_H
+-#define AT91RM9200_TC_H
+-
+-#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
+-#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
+-
+-#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
+-#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
+-#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
+-#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
+-#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
+-#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
+-#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
+-#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
+-#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
+-#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
+-#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
+-#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
+-#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
+-#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
+-#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
+-#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
+-
+-
+-#define AT91_TC_CCR		0x00		/* Channel Control Register */
+-#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
+-#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
+-#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
+-
+-#define AT91_TC_CMR		0x04		/* Channel Mode Register */
+-#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
+-#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
+-#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
+-#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
+-#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
+-#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
+-#define			AT91_TC_XC0			(5 << 0)
+-#define			AT91_TC_XC1			(6 << 0)
+-#define			AT91_TC_XC2			(7 << 0)
+-#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
+-#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
+-#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
+-#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
+-#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
+-#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
+-#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
+-#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
+-#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
+-#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
+-
+-#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
+-#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
+-#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
+-#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
+-#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
+-#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
+-#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
+-#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
+-#define			AT91_TC_EEVT_TIOB		(0 << 10)
+-#define			AT91_TC_EEVT_XC0		(1 << 10)
+-#define			AT91_TC_EEVT_XC1		(2 << 10)
+-#define			AT91_TC_EEVT_XC2		(3 << 10)
+-#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
+-#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
+-#define			AT91_TC_WAVESEL_UP		(0 << 13)
+-#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
+-#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
+-#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
+-#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
+-#define			AT91_TC_ACPA_NONE		(0 << 16)
+-#define			AT91_TC_ACPA_SET		(1 << 16)
+-#define			AT91_TC_ACPA_CLEAR		(2 << 16)
+-#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
+-#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
+-#define			AT91_TC_ACPC_NONE		(0 << 18)
+-#define			AT91_TC_ACPC_SET		(1 << 18)
+-#define			AT91_TC_ACPC_CLEAR		(2 << 18)
+-#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
+-#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
+-#define			AT91_TC_AEEVT_NONE		(0 << 20)
+-#define			AT91_TC_AEEVT_SET		(1 << 20)
+-#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
+-#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
+-#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
+-#define			AT91_TC_ASWTRG_NONE		(0 << 22)
+-#define			AT91_TC_ASWTRG_SET		(1 << 22)
+-#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
+-#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
+-#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
+-#define			AT91_TC_BCPB_NONE		(0 << 24)
+-#define			AT91_TC_BCPB_SET		(1 << 24)
+-#define			AT91_TC_BCPB_CLEAR		(2 << 24)
+-#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
+-#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
+-#define			AT91_TC_BCPC_NONE		(0 << 26)
+-#define			AT91_TC_BCPC_SET		(1 << 26)
+-#define			AT91_TC_BCPC_CLEAR		(2 << 26)
+-#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
+-#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
+-#define			AT91_TC_BEEVT_NONE		(0 << 28)
+-#define			AT91_TC_BEEVT_SET		(1 << 28)
+-#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
+-#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
+-#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
+-#define			AT91_TC_BSWTRG_NONE		(0 << 30)
+-#define			AT91_TC_BSWTRG_SET		(1 << 30)
+-#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
+-#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
+-
+-#define AT91_TC_CV		0x10		/* Counter Value */
+-#define AT91_TC_RA		0x14		/* Register A */
+-#define AT91_TC_RB		0x18		/* Register B */
+-#define AT91_TC_RC		0x1c		/* Register C */
+-
+-#define AT91_TC_SR		0x20		/* Status Register */
+-#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
+-#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
+-#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
+-#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
+-#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
+-#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
+-#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
+-#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
+-#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
+-#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
+-#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
+-
+-#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
+-#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
+-#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h	Mon Dec  4 16:41:04 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h	Thu Jan  1 02:00:00 1970
+@@ -1,57 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_twi.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * Two-wire Interface (TWI) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_TWI_H
+-#define AT91RM9200_TWI_H
+-
+-#define	AT91_TWI_CR		0x00		/* Control Register */
+-#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
+-#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
+-#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
+-#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
+-#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
+-
+-#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
+-#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
+-#define			AT91_TWI_IADRSZ_NO		(0 << 8)
+-#define			AT91_TWI_IADRSZ_1		(1 << 8)
+-#define			AT91_TWI_IADRSZ_2		(2 << 8)
+-#define			AT91_TWI_IADRSZ_3		(3 << 8)
+-#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
+-#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
+-
+-#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
+-
+-#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
+-#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
+-#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
+-#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
+-
+-#define	AT91_TWI_SR		0x20		/* Status Register */
+-#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
+-#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
+-#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
+-#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error */
+-#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error */
+-#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
+-
+-#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
+-#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
+-#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
+-#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
+-#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
+-
+-#endif
+-
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h	Thu Jan  1 02:00:00 1970
+@@ -1,77 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * USB Device Port (UDP) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_UDP_H
+-#define AT91RM9200_UDP_H
+-
+-#define AT91_UDP_FRM_NUM	0x00		/* Frame Number Register */
+-#define		AT91_UDP_NUM		(0x7ff <<  0)		/* Frame Number */
+-#define		AT91_UDP_FRM_ERR	(1     << 16)		/* Frame Error */
+-#define		AT91_UDP_FRM_OK		(1     << 17)		/* Frame OK */
+-
+-#define AT91_UDP_GLB_STAT	0x04		/* Global State Register */
+-#define		AT91_UDP_FADDEN		(1 <<  0)		/* Function Address Enable */
+-#define		AT91_UDP_CONFG		(1 <<  1)		/* Configured */
+-#define		AT91_UDP_ESR		(1 <<  2)		/* Enable Send Resume */
+-#define		AT91_UDP_RSMINPR	(1 <<  3)		/* Resume has been sent */
+-#define		AT91_UDP_RMWUPE		(1 <<  4)		/* Remote Wake Up Enable */
+-
+-#define AT91_UDP_FADDR		0x08		/* Function Address Register */
+-#define		AT91_UDP_FADD		(0x7f << 0)		/* Function Address Value */
+-#define		AT91_UDP_FEN		(1    << 8)		/* Function Enable */
+-
+-#define AT91_UDP_IER		0x10		/* Interrupt Enable Register */
+-#define AT91_UDP_IDR		0x14		/* Interrupt Disable Register */
+-#define AT91_UDP_IMR		0x18		/* Interrupt Mask Register */
+-
+-#define AT91_UDP_ISR		0x1c		/* Interrupt Status Register */
+-#define		AT91_UDP_EP(n)		(1 << (n))		/* Endpoint Interrupt Status */
+-#define		AT91_UDP_RXSUSP		(1 <<  8)		/* USB Suspend Interrupt Status */
+-#define		AT91_UDP_RXRSM		(1 <<  9)		/* USB Resume Interrupt Status */
+-#define		AT91_UDP_EXTRSM		(1 << 10)		/* External Resume Interrupt Status */
+-#define		AT91_UDP_SOFINT		(1 << 11)		/* Start of Frame Interrupt Status */
+-#define		AT91_UDP_ENDBUSRES	(1 << 12)		/* End of Bus Reset Interrpt Status */
+-#define		AT91_UDP_WAKEUP		(1 << 13)		/* USB Wakeup Interrupt Status */
+-
+-#define AT91_UDP_ICR		0x20		/* Interrupt Clear Register */
+-#define AT91_UDP_RST_EP		0x28		/* Reset Endpoint Register */
+-
+-#define AT91_UDP_CSR(n)		(0x30 + ((n) * 4))	/* Endpoint Control/Status Registers 0-7 */
+-#define		AT91_UDP_TXCOMP		(1 <<  0)		/* Generates IN packet with data previously written in DPR */
+-#define		AT91_UDP_RX_DATA_BK0	(1 <<  1)		/* Receive Data Bank 0 */
+-#define		AT91_UDP_RXSETUP	(1 <<  2)		/* Send STALL to the host */
+-#define		AT91_UDP_STALLSENT	(1 <<  3)		/* Stall Sent / Isochronous error (Isochronous endpoints) */
+-#define		AT91_UDP_TXPKTRDY	(1 <<  4)		/* Transmit Packet Ready */
+-#define		AT91_UDP_FORCESTALL	(1 <<  5)		/* Force Stall */
+-#define		AT91_UDP_RX_DATA_BK1	(1 <<  6)		/* Receive Data Bank 1 */
+-#define		AT91_UDP_DIR		(1 <<  7)		/* Transfer Direction */
+-#define		AT91_UDP_EPTYPE		(7 <<  8)		/* Endpoint Type */
+-#define			AT91_UDP_EPTYPE_CTRL		(0 <<  8)
+-#define			AT91_UDP_EPTYPE_ISO_OUT		(1 <<  8)
+-#define			AT91_UDP_EPTYPE_BULK_OUT	(2 <<  8)
+-#define			AT91_UDP_EPTYPE_INT_OUT		(3 <<  8)
+-#define			AT91_UDP_EPTYPE_ISO_IN		(5 <<  8)
+-#define			AT91_UDP_EPTYPE_BULK_IN		(6 <<  8)
+-#define			AT91_UDP_EPTYPE_INT_IN		(7 <<  8)
+-#define		AT91_UDP_DTGLE		(1 << 11)		/* Data Toggle */
+-#define		AT91_UDP_EPEDS		(1 << 15)		/* Endpoint Enable/Disable */
+-#define		AT91_UDP_RXBYTECNT	(0x7ff << 16)		/* Number of bytes in FIFO */
+-
+-#define AT91_UDP_FDR(n)		(0x50 + ((n) * 4))	/* Endpoint FIFO Data Registers 0-7 */
+-
+-#define AT91_UDP_TXVC		0x74		/* Transceiver Control Register */
+-#define		AT91_UDP_TXVC_TXVDIS	(1 << 8)		/* Transceiver Disable */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9260.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9260.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9260.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9260.h	Wed Nov 15 08:54:30 2006
+@@ -0,0 +1,125 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91sam9260.h
++ *
++ * (C) 2006 Andrew Victor
++ *
++ * Common definitions.
++ * Based on AT91SAM9260 datasheet revision A (Preliminary).
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM9260_H
++#define AT91SAM9260_H
++
++/*
++ * Peripheral identifiers/interrupts.
++ */
++#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
++#define AT91_ID_SYS		1	/* System Peripherals */
++#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
++#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
++#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
++#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
++#define AT91SAM9260_ID_US0	6	/* USART 0 */
++#define AT91SAM9260_ID_US1	7	/* USART 1 */
++#define AT91SAM9260_ID_US2	8	/* USART 2 */
++#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
++#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
++#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
++#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
++#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
++#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
++#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
++#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
++#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
++#define AT91SAM9260_ID_UHP	20	/* USB Host port */
++#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
++#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
++#define AT91SAM9260_ID_US3	23	/* USART 3 */
++#define AT91SAM9260_ID_US4	24	/* USART 4 */
++#define AT91SAM9260_ID_US5	25	/* USART 5 */
++#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
++#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
++#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
++#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
++#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
++#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
++
++
++/*
++ * User Peripheral physical base addresses.
++ */
++#define AT91SAM9260_BASE_TCB0		0xfffa0000
++#define AT91SAM9260_BASE_TC0		0xfffa0000
++#define AT91SAM9260_BASE_TC1		0xfffa0040
++#define AT91SAM9260_BASE_TC2		0xfffa0080
++#define AT91SAM9260_BASE_UDP		0xfffa4000
++#define AT91SAM9260_BASE_MCI		0xfffa8000
++#define AT91SAM9260_BASE_TWI		0xfffac000
++#define AT91SAM9260_BASE_US0		0xfffb0000
++#define AT91SAM9260_BASE_US1		0xfffb4000
++#define AT91SAM9260_BASE_US2		0xfffb8000
++#define AT91SAM9260_BASE_SSC		0xfffbc000
++#define AT91SAM9260_BASE_ISI		0xfffc0000
++#define AT91SAM9260_BASE_EMAC		0xfffc4000
++#define AT91SAM9260_BASE_SPI0		0xfffc8000
++#define AT91SAM9260_BASE_SPI1		0xfffcc000
++#define AT91SAM9260_BASE_US3		0xfffd0000
++#define AT91SAM9260_BASE_US4		0xfffd4000
++#define AT91SAM9260_BASE_US5		0xfffd8000
++#define AT91SAM9260_BASE_TCB1		0xfffdc000
++#define AT91SAM9260_BASE_TC3		0xfffdc000
++#define AT91SAM9260_BASE_TC4		0xfffdc040
++#define AT91SAM9260_BASE_TC5		0xfffdc080
++#define AT91SAM9260_BASE_ADC		0xfffe0000
++#define AT91_BASE_SYS			0xffffe800
++
++/*
++ * System Peripherals (offset from AT91_BASE_SYS)
++ */
++#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
++#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
++#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
++#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
++#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
++#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
++#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
++#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
++#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
++#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
++#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
++#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
++#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
++#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
++#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
++#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
++#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
++
++
++/*
++ * Internal Memory.
++ */
++#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
++#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
++ 
++#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
++#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
++#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
++#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
++
++#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
++
++#if 0
++/*
++ * PIO pin definitions (peripheral A/B multiplexing).
++ */
++
++// TODO: Add
++
++#endif
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h	Thu Nov 23 17:05:07 2006
+@@ -0,0 +1,78 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
++ *
++ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
++ * Based on AT91SAM9260 datasheet revision B.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM9260_MATRIX_H
++#define AT91SAM9260_MATRIX_H
++
++#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
++#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
++#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
++#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
++#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
++#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
++#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
++#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
++#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
++#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
++#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
++#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
++
++#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
++#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
++#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
++#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
++#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
++#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
++#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
++#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
++#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
++#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
++#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
++#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
++#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
++#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
++
++#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
++#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
++#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
++#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
++#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
++#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
++#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
++#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
++#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
++#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
++#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
++
++#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
++#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
++#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
++
++#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
++#define		AT91_MATRIX_CS1A		(1 << 1)	 /* Chip Select 1 Assignment */
++#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
++#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
++#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
++#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
++#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
++#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
++#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
++#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
++#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
++#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
++#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
++#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
++#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
++#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
++#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9261.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9261.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9261.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9261.h	Fri Nov 10 10:08:55 2006
+@@ -0,0 +1,292 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91sam9261.h
++ *
++ * Copyright (C) SAN People
++ *
++ * Common definitions.
++ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM9261_H
++#define AT91SAM9261_H
++
++/*
++ * Peripheral identifiers/interrupts.
++ */
++#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
++#define AT91_ID_SYS		1	/* System Peripherals */
++#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
++#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
++#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
++#define AT91SAM9261_ID_US0	6	/* USART 0 */
++#define AT91SAM9261_ID_US1	7	/* USART 1 */
++#define AT91SAM9261_ID_US2	8	/* USART 2 */
++#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
++#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
++#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
++#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
++#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
++#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
++#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
++#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
++#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
++#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
++#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
++#define AT91SAM9261_ID_UHP	20	/* USB Host port */
++#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
++#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
++#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
++#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
++
++
++/*
++ * User Peripheral physical base addresses.
++ */
++#define AT91SAM9261_BASE_TCB0		0xfffa0000
++#define AT91SAM9261_BASE_TC0		0xfffa0000
++#define AT91SAM9261_BASE_TC1		0xfffa0040
++#define AT91SAM9261_BASE_TC2		0xfffa0080
++#define AT91SAM9261_BASE_UDP		0xfffa4000
++#define AT91SAM9261_BASE_MCI		0xfffa8000
++#define AT91SAM9261_BASE_TWI		0xfffac000
++#define AT91SAM9261_BASE_US0		0xfffb0000
++#define AT91SAM9261_BASE_US1		0xfffb4000
++#define AT91SAM9261_BASE_US2		0xfffb8000
++#define AT91SAM9261_BASE_SSC0		0xfffbc000
++#define AT91SAM9261_BASE_SSC1		0xfffc0000
++#define AT91SAM9261_BASE_SSC2		0xfffc4000
++#define AT91SAM9261_BASE_SPI0		0xfffc8000
++#define AT91SAM9261_BASE_SPI1		0xfffcc000
++#define AT91_BASE_SYS			0xffffea00
++
++
++/*
++ * System Peripherals (offset from AT91_BASE_SYS)
++ */
++#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
++#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
++#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
++#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
++#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
++#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
++#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
++#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
++#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
++#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
++#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
++#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
++#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
++#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
++#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
++
++
++/*
++ * Internal Memory.
++ */
++#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
++#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
++
++#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
++#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
++
++#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
++#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
++
++
++#if 0
++/*
++ * PIO pin definitions (peripheral A/B multiplexing).
++ */
++#define AT91_PA0_SPI0_MISO	(1 <<  0)	/* A: SPI0 Master In Slave */
++#define AT91_PA0_MCDA0		(1 <<  0)	/* B: Multimedia Card A Data 0 */
++#define AT91_PA1_SPI0_MOSI	(1 <<  1)	/* A: SPI0 Master Out Slave */
++#define AT91_PA1_MCCDA		(1 <<  1)	/* B: Multimedia Card A Command */
++#define AT91_PA2_SPI0_SPCK	(1 <<  2)	/* A: SPI0 Serial Clock */
++#define AT91_PA2_MCCK		(1 <<  2)	/* B: Multimedia Card Clock */
++#define AT91_PA3_SPI0_NPCS0	(1 <<  3)	/* A: SPI0 Peripheral Chip Select 0 */
++#define AT91_PA4_SPI0_NPCS1	(1 <<  4)	/* A: SPI0 Peripheral Chip Select 1 */
++#define AT91_PA4_MCDA1		(1 <<  4)	/* B: Multimedia Card A Data 1 */
++#define AT91_PA5_SPI0_NPCS2	(1 <<  5)	/* A: SPI0 Peripheral Chip Select 2 */
++#define AT91_PA5_MCDA2		(1 <<  5)	/* B: Multimedia Card A Data 2 */
++#define AT91_PA6_SPI0_NPCS3	(1 <<  6)	/* A: SPI0 Peripheral Chip Select 3 */
++#define AT91_PA6_MCDA3		(1 <<  6)	/* B: Multimedia Card A Data 3 */
++#define AT91_PA7_TWD		(1 <<  7)	/* A: TWI Two-wire Serial Data */
++#define AT91_PA7_PCK0		(1 <<  7)	/* B: PMC Programmable clock Output 0 */
++#define AT91_PA8_TWCK		(1 <<  8)	/* A: TWI Two-wire Serial Clock */
++#define AT91_PA8_PCK1		(1 <<  8)	/* B: PMC Programmable clock Output 1 */
++#define AT91_PA9_DRXD		(1 <<  9)	/* A: DBGU Debug Receive Data */
++#define AT91_PA9_PCK2		(1 <<  9)	/* B: PMC Programmable clock Output 2 */
++#define AT91_PA10_DTXD		(1 << 10)	/* A: DBGU Debug Transmit Data */
++#define AT91_PA10_PCK3		(1 << 10)	/* B: PMC Programmable clock Output 3 */
++#define AT91_PA11_TSYNC		(1 << 11)	/* A: Trace Synchronization Signal */
++#define AT91_PA11_SCK1		(1 << 11)	/* B: USART1 Serial Clock */
++#define AT91_PA12_TCLK		(1 << 12)	/* A: Trace Clock */
++#define AT91_PA12_RTS1		(1 << 12)	/* B: USART1 Ready To Send */
++#define AT91_PA13_TPS0		(1 << 13)	/* A: Trace ARM Pipeline Status 0 */
++#define AT91_PA13_CTS1		(1 << 13)	/* B: USART1 Clear To Send */
++#define AT91_PA14_TPS1		(1 << 14)	/* A: Trace ARM Pipeline Status 1 */
++#define AT91_PA14_SCK2		(1 << 14)	/* B: USART2 Serial Clock */
++#define AT91_PA15_TPS2		(1 << 15)	/* A: Trace ARM Pipeline Status 2 */
++#define AT91_PA15_RTS2		(1 << 15)	/* B: USART2 Ready To Send */
++#define AT91_PA16_TPK0		(1 << 16)	/* A: Trace Packet Port 0 */
++#define AT91_PA16_CTS2		(1 << 16)	/* B: USART2 Clear To Send */
++#define AT91_PA17_TPK1		(1 << 17)	/* A: Trace Packet Port 1 */
++#define AT91_PA17_TF1		(1 << 17)	/* B: SSC1 Transmit Frame Sync */
++#define AT91_PA18_TPK2		(1 << 18)	/* A: Trace Packet Port 2 */
++#define AT91_PA18_TK1		(1 << 18)	/* B: SSC1 Transmit Clock */
++#define AT91_PA19_TPK3		(1 << 19)	/* A: Trace Packet Port 3 */
++#define AT91_PA19_TD1		(1 << 19)	/* B: SSC1 Transmit Data */
++#define AT91_PA20_TPK4		(1 << 20)	/* A: Trace Packet Port 4 */
++#define AT91_PA20_RD1		(1 << 20)	/* B: SSC1 Receive Data */
++#define AT91_PA21_TPK5		(1 << 21)	/* A: Trace Packet Port 5 */
++#define AT91_PA21_RK1		(1 << 21)	/* B: SSC1 Receive Clock */
++#define AT91_PA22_TPK6		(1 << 22)	/* A: Trace Packet Port 6 */
++#define AT91_PA22_RF1		(1 << 22)	/* B: SSC1 Receive Frame Sync */
++#define AT91_PA23_TPK7		(1 << 23)	/* A: Trace Packet Port 7 */
++#define AT91_PA23_RTS0		(1 << 23)	/* B: USART0 Ready To Send */
++#define AT91_PA24_TPK8		(1 << 24)	/* A: Trace Packet Port 8 */
++#define AT91_PA24_SPI1_NPCS1	(1 << 24)	/* B: SPI1 Peripheral Chip Select 1 */
++#define AT91_PA25_TPK9		(1 << 25)	/* A: Trace Packet Port 9 */
++#define AT91_PA25_SPI1_NPCS2	(1 << 25)	/* B: SPI1 Peripheral Chip Select 2 */
++#define AT91_PA26_TPK10		(1 << 26)	/* A: Trace Packet Port 10 */
++#define AT91_PA26_SPI1_NPCS3	(1 << 26)	/* B: SPI1 Peripheral Chip Select 3 */
++#define AT91_PA27_TPK11		(1 << 27)	/* A: Trace Packet Port 11 */
++#define AT91_PA27_SPI0_NPCS1	(1 << 27)	/* B: SPI0 Peripheral Chip Select 1 */
++#define AT91_PA28_TPK12		(1 << 28)	/* A: Trace Packet Port 12 */
++#define AT91_PA28_SPI0_NPCS2	(1 << 28)	/* B: SPI0 Peripheral Chip Select 2 */
++#define AT91_PA29_TPK13		(1 << 29)	/* A: Trace Packet Port 13 */
++#define AT91_PA29_SPI0_NPCS3	(1 << 29)	/* B: SPI0 Peripheral Chip Select 3 */
++#define AT91_PA30_TPK14		(1 << 30)	/* A: Trace Packet Port 14 */
++#define AT91_PA30_A23		(1 << 30)	/* B: Address Bus bit 23 */
++#define AT91_PA31_TPK15		(1 << 31)	/* A: Trace Packet Port 15 */
++#define AT91_PA31_A24		(1 << 31)	/* B: Address Bus bit 24 */
++
++#define AT91_PB0_LCDVSYNC	(1 <<  0)	/* A: LCD Vertical Synchronization */
++#define AT91_PB1_LCDHSYNC	(1 <<  1)	/* A: LCD Horizontal Synchronization */
++#define AT91_PB2_LCDDOTCK	(1 <<  2)	/* A: LCD Dot Clock */
++#define AT91_PB2_PCK0		(1 <<  2)	/* B: PMC Programmable clock Output 0 */
++#define AT91_PB3_LCDDEN		(1 <<  3)	/* A: LCD Data Enable */
++#define AT91_PB4_LCDCC		(1 <<  4)	/* A: LCD Contrast Control */
++#define AT91_PB4_LCDD2		(1 <<  4)	/* B: LCD Data Bus Bit 2 */
++#define AT91_PB5_LCDD0		(1 <<  5)	/* A: LCD Data Bus Bit 0 */
++#define AT91_PB5_LCDD3		(1 <<  5)	/* B: LCD Data Bus Bit 3 */
++#define AT91_PB6_LCDD1		(1 <<  6)	/* A: LCD Data Bus Bit 1 */
++#define AT91_PB6_LCDD4		(1 <<  6)	/* B: LCD Data Bus Bit 4 */
++#define AT91_PB7_LCDD2		(1 <<  7)	/* A: LCD Data Bus Bit 2 */
++#define AT91_PB7_LCDD5		(1 <<  7)	/* B: LCD Data Bus Bit 5 */
++#define AT91_PB8_LCDD3		(1 <<  8)	/* A: LCD Data Bus Bit 3 */
++#define AT91_PB8_LCDD6		(1 <<  8)	/* B: LCD Data Bus Bit 6 */
++#define AT91_PB9_LCDD4		(1 <<  9)	/* A: LCD Data Bus Bit 4 */
++#define AT91_PB9_LCDD7		(1 <<  9)	/* B: LCD Data Bus Bit 7 */
++#define AT91_PB10_LCDD5		(1 << 10)	/* A: LCD Data Bus Bit 5 */
++#define AT91_PB10_LCDD10	(1 << 10)	/* B: LCD Data Bus Bit 10 */
++#define AT91_PB11_LCDD6		(1 << 11)	/* A: LCD Data Bus Bit 6 */
++#define AT91_PB11_LCDD11	(1 << 11)	/* B: LCD Data Bus Bit 11 */
++#define AT91_PB12_LCDD7		(1 << 12)	/* A: LCD Data Bus Bit 7 */
++#define AT91_PB12_LCDD12	(1 << 12)	/* B: LCD Data Bus Bit 12 */
++#define AT91_PB13_LCDD8		(1 << 13)	/* A: LCD Data Bus Bit 8 */
++#define AT91_PB13_LCDD13	(1 << 13)	/* B: LCD Data Bus Bit 13 */
++#define AT91_PB14_LCDD9		(1 << 14)	/* A: LCD Data Bus Bit 9 */
++#define AT91_PB14_LCDD14	(1 << 14)	/* B: LCD Data Bus Bit 14 */
++#define AT91_PB15_LCDD10	(1 << 15)	/* A: LCD Data Bus Bit 10 */
++#define AT91_PB15_LCDD15	(1 << 15)	/* B: LCD Data Bus Bit 15 */
++#define AT91_PB16_LCDD11	(1 << 16)	/* A: LCD Data Bus Bit 11 */
++#define AT91_PB16_LCDD19	(1 << 16)	/* B: LCD Data Bus Bit 19 */
++#define AT91_PB17_LCDD12	(1 << 17)	/* A: LCD Data Bus Bit 12 */
++#define AT91_PB17_LCDD20	(1 << 17)	/* B: LCD Data Bus Bit 20 */
++#define AT91_PB18_LCDD13	(1 << 18)	/* A: LCD Data Bus Bit 13 */
++#define AT91_PB18_LCDD21	(1 << 18)	/* B: LCD Data Bus Bit 21 */
++#define AT91_PB19_LCDD14	(1 << 19)	/* A: LCD Data Bus Bit 14 */
++#define AT91_PB19_LCDD22	(1 << 19)	/* B: LCD Data Bus Bit 22 */
++#define AT91_PB20_LCDD15	(1 << 20)	/* A: LCD Data Bus Bit 15 */
++#define AT91_PB20_LCDD23	(1 << 20)	/* B: LCD Data Bus Bit 23 */
++#define AT91_PB21_TF0		(1 << 21)	/* A: SSC0 Transmit Frame Sync */
++#define AT91_PB21_LCDD16	(1 << 21)	/* B: LCD Data Bus Bit 16 */
++#define AT91_PB22_TK0		(1 << 22)	/* A: SSC0 Transmit Clock */
++#define AT91_PB22_LCDD17	(1 << 22)	/* B: LCD Data Bus Bit 17 */
++#define AT91_PB23_TD0		(1 << 23)	/* A: SSC0 Transmit Data */
++#define AT91_PB23_LCDD18	(1 << 23)	/* B: LCD Data Bus Bit 18 */
++#define AT91_PB24_RD0		(1 << 24)	/* A: SSC0 Receive Data */
++#define AT91_PB24_LCDD19	(1 << 24)	/* B: LCD Data Bus Bit 19 */
++#define AT91_PB25_RK0		(1 << 25)	/* A: SSC0 Receive Clock */
++#define AT91_PB25_LCDD20	(1 << 25)	/* B: LCD Data Bus Bit 20 */
++#define AT91_PB26_RF0		(1 << 26)	/* A: SSC0 Receive Frame Sync */
++#define AT91_PB26_LCDD21	(1 << 26)	/* B: LCD Data Bus Bit 21 */
++#define AT91_PB27_SPI1_NPCS1	(1 << 27)	/* A: SPI1 Peripheral Chip Select 1 */
++#define AT91_PB27_LCDD22	(1 << 27)	/* B: LCD Data Bus Bit 22 */
++#define AT91_PB28_SPI1_NPCS0	(1 << 28)	/* A: SPI1 Peripheral Chip Select 0 */
++#define AT91_PB28_LCDD23	(1 << 28)	/* B: LCD Data Bus Bit 23 */
++#define AT91_PB29_SPI1_SPCK	(1 << 29)	/* A: SPI1 Serial Clock */
++#define AT91_PB29_IRQ2		(1 << 29)	/* B: Interrupt input 2 */
++#define AT91_PB30_SPI1_MISO	(1 << 30)	/* A: SPI1 Master In Slave */
++#define AT91_PB30_IRQ1		(1 << 30)	/* B: Interrupt input 1 */
++#define AT91_PB31_SPI1_MOSI	(1 << 31)	/* A: SPI1 Master Out Slave */
++#define AT91_PB31_PCK2		(1 << 31)	/* B: PMC Programmable clock Output 2 */
++
++#define AT91_PC0_SMOE		(1 << 0)	/* A: SmartMedia Output Enable */
++#define AT91_PC0_NCS6		(1 << 0)	/* B: Chip Select 6 */
++#define AT91_PC1_SMWE		(1 << 1)	/* A: SmartMedia Write Enable */
++#define AT91_PC1_NCS7		(1 << 1)	/* B: Chip Select 7 */
++#define AT91_PC2_NWAIT		(1 << 2)	/* A: NWAIT */
++#define AT91_PC2_IRQ0		(1 << 2)	/* B: Interrupt input 0 */
++#define AT91_PC3_A25_CFRNW	(1 << 3)	/* A: Address Bus[25] / Compact Flash Read Not Write */
++#define AT91_PC4_NCS4_CFCS0	(1 << 4)	/* A: Chip Select 4 / CompactFlash Chip Select 0 */
++#define AT91_PC5_NCS5_CFCS1	(1 << 5)	/* A: Chip Select 5 / CompactFlash Chip Select 1 */
++#define AT91_PC6_CFCE1		(1 << 6)	/* A: CompactFlash Chip Enable 1 */
++#define AT91_PC7_CFCE2		(1 << 7)	/* A: CompactFlash Chip Enable 2 */
++#define AT91_PC8_TXD0		(1 << 8)	/* A: USART0 Transmit Data */
++#define AT91_PC8_PCK2		(1 << 8)	/* B: PMC Programmable clock Output 2 */
++#define AT91_PC9_RXD0		(1 << 9)	/* A: USART0 Receive Data */
++#define AT91_PC9_PCK3		(1 << 9)	/* B: PMC Programmable clock Output 3 */
++#define AT91_PC10_RTS0		(1 << 10)	/* A: USART0 Ready To Send */
++#define AT91_PC10_SCK0		(1 << 10)	/* B: USART0 Serial Clock */
++#define AT91_PC11_CTS0		(1 << 11)	/* A: USART0 Clear To Send */
++#define AT91_PC11_FIQ		(1 << 11)	/* B: AIC Fast Interrupt Input */
++#define AT91_PC12_TXD1		(1 << 12)	/* A: USART1 Transmit Data */
++#define AT91_PC12_NCS6		(1 << 12)	/* B: Chip Select 6 */
++#define AT91_PC13_RXD1		(1 << 13)	/* A: USART1 Receive Data */
++#define AT91_PC13_NCS7		(1 << 13)	/* B: Chip Select 7 */
++#define AT91_PC14_TXD2		(1 << 14)	/* A: USART2 Transmit Data */
++#define AT91_PC14_SPI1_NPCS2	(1 << 14)	/* B: SPI1 Peripheral Chip Select 2 */
++#define AT91_PC15_RXD2		(1 << 15)	/* A: USART2 Receive Data */
++#define AT91_PC15_SPI1_NPCS3	(1 << 15)	/* B: SPI1 Peripheral Chip Select 3 */
++#define AT91_PC16_D16		(1 << 16)	/* A: Data Bus [16] */
++#define AT91_PC16_TCLK0		(1 << 16)	/* B: Timer Counter 0 external clock input */
++#define AT91_PC17_D17		(1 << 17)	/* A: Data Bus [17] */
++#define AT91_PC17_TCLK1		(1 << 17)	/* B: Timer Counter 1 external clock input */
++#define AT91_PC18_D18		(1 << 18)	/* A: Data Bus [18] */
++#define AT91_PC18_TCLK2		(1 << 18)	/* B: Timer Counter 2 external clock input */
++#define AT91_PC19_D19		(1 << 19)	/* A: Data Bus [19] */
++#define AT91_PC19_TIOA0		(1 << 19)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
++#define AT91_PC20_D20		(1 << 20)	/* A: Data Bus [20] */
++#define AT91_PC20_TIOB0		(1 << 20)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
++#define AT91_PC21_D21		(1 << 21)	/* A: Data Bus [21] */
++#define AT91_PC21_TIOA1		(1 << 21)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
++#define AT91_PC22_D22		(1 << 22)	/* A: Data Bus [22] */
++#define AT91_PC22_TIOB1		(1 << 22)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
++#define AT91_PC23_D23		(1 << 23)	/* A: Data Bus [23] */
++#define AT91_PC23_TIOA2		(1 << 23)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
++#define AT91_PC24_D24		(1 << 24)	/* A: Data Bus [24] */
++#define AT91_PC24_TIOB2		(1 << 24)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
++#define AT91_PC25_D25		(1 << 25)	/* A: Data Bus [25] */
++#define AT91_PC25_TF2		(1 << 25)	/* B: SSC2 Transmit Frame Sync */
++#define AT91_PC26_D26		(1 << 26)	/* A: Data Bus [26] */
++#define AT91_PC26_TK2		(1 << 26)	/* B: SSC2 Transmit Clock */
++#define AT91_PC27_D27		(1 << 27)	/* A: Data Bus [27] */
++#define AT91_PC27_TD2		(1 << 27)	/* B: SSC2 Transmit Data */
++#define AT91_PC28_D28		(1 << 28)	/* A: Data Bus [28] */
++#define AT91_PC28_RD2		(1 << 28)	/* B: SSC2 Receive Data */
++#define AT91_PC29_D29		(1 << 29)	/* A: Data Bus [29] */
++#define AT91_PC29_RK2		(1 << 29)	/* B: SSC2 Receive Clock */
++#define AT91_PC30_D30		(1 << 30)	/* A: Data Bus [30] */
++#define AT91_PC30_RF2		(1 << 30)	/* B: SSC2 Receive Frame Sync */
++#define AT91_PC31_D31		(1 << 31)	/* A: Data Bus [31] */
++#define AT91_PC31_PCK1		(1 << 31)	/* B: PMC Programmable clock Output 1 */
++#endif
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h	Thu Nov 23 17:08:24 2006
+@@ -0,0 +1,62 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
++ *
++ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM9261_MATRIX_H
++#define AT91SAM9261_MATRIX_H
++
++#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
++#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
++#define		AT01_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
++
++#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
++#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
++#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
++#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
++#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
++#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
++#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
++#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
++#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
++#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
++#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
++
++#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
++#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
++#define			AT91_MATRIX_ITCM_0		(0 << 0)
++#define			AT91_MATRIX_ITCM_16		(5 << 0)
++#define			AT91_MATRIX_ITCM_32		(6 << 0)
++#define			AT91_MATRIX_ITCM_64		(7 << 0)
++#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
++#define			AT91_MATRIX_DTCM_0		(0 << 4)
++#define			AT91_MATRIX_DTCM_16		(5 << 4)
++#define			AT91_MATRIX_DTCM_32		(6 << 4)
++#define			AT91_MATRIX_DTCM_64		(7 << 4)
++
++#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
++#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
++#define 		AT91_MATRIX_CS1A_SMC		(0 << 1)
++#define 		AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
++#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
++#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
++#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
++#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
++#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
++#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
++#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
++#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
++#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
++#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
++
++#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
++#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h	Mon Nov 13 12:27:30 2006
+@@ -0,0 +1,134 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
++ *
++ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM926x_MC_H
++#define AT91SAM926x_MC_H
++
++/* SDRAM Controller (SDRAMC) registers */
++#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
++#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
++#define			AT91_SDRAMC_MODE_NORMAL		0
++#define			AT91_SDRAMC_MODE_NOP		1
++#define			AT91_SDRAMC_MODE_PRECHARGE	2
++#define			AT91_SDRAMC_MODE_LMR		3
++#define			AT91_SDRAMC_MODE_REFRESH	4
++#define			AT91_SDRAMC_MODE_EXT_LMR	5
++#define			AT91_SDRAMC_MODE_DEEP		6
++
++#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
++#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
++
++#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
++#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
++#define			AT91_SDRAMC_NC_8	(0 << 0)
++#define			AT91_SDRAMC_NC_9	(1 << 0)
++#define			AT91_SDRAMC_NC_10	(2 << 0)
++#define			AT91_SDRAMC_NC_11	(3 << 0)
++#define 	AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
++#define			AT91_SDRAMC_NR_11	(0 << 2)
++#define			AT91_SDRAMC_NR_12	(1 << 2)
++#define			AT91_SDRAMC_NR_13	(2 << 2)
++#define 	AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
++#define			AT91_SDRAMC_NB_2	(0 << 4)
++#define 		AT91_SDRAMC_NB_4	(1 << 4)
++#define 	AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
++#define			AT91_SDRAMC_CAS_1	(1 << 5)
++#define			AT91_SDRAMC_CAS_2	(2 << 5)
++#define			AT91_SDRAMC_CAS_3	(3 << 5)
++#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
++#define			AT91_SDRAMC_DBW_32	(0 << 7)
++#define			AT91_SDRAMC_DBW_16	(1 << 7)
++#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
++#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
++#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
++#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */  
++#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */   
++#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
++
++#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
++#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
++#define			AT91_SDRAMC_LPCB_DISABLE		0
++#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
++#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
++#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
++#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
++#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
++#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
++#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
++#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
++#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
++#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
++
++#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
++#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
++#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */   
++#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
++#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
++
++#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
++#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
++#define			AT91_SDRAMC_MD_SDRAM		0
++#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
++
++
++/* Static Memory Controller (SMC) registers */
++#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
++#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
++#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
++#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
++#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
++#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */   
++#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
++#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
++#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
++
++#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
++#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
++#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
++#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
++#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
++#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
++#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
++#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
++#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
++
++#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
++#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
++#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
++#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */ 
++#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
++
++#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
++#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
++#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
++#define		AT91_SMC_EXNWMODE	(3 <<  5)			/* NWAIT Mode */
++#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 5)
++#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 5)
++#define			AT91_SMC_EXNWMODE_READY		(3 << 5)
++#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
++#define			AT91_SMC_BAT_SELECT		(0 << 8)
++#define			AT91_SMC_BAT_WRITE		(1 << 8)
++#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
++#define			AT91_SMC_DBW_8			(0 << 12)
++#define			AT91_SMC_DBW_16			(1 << 12)
++#define			AT91_SMC_DBW_32			(2 << 12)
++#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
++#define			AT91_SMC_TDF_(x)		((x) << 16)
++#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
++#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
++#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
++#define			AT91_SMC_PS_4			(0 << 28)
++#define			AT91_SMC_PS_8			(1 << 28)
++#define			AT91_SMC_PS_16			(2 << 28)
++#define			AT91_SMC_PS_32			(3 << 28)
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/board.h linux-2.6.19/include/asm-arm/arch-at91rm9200/board.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/board.h	Mon Dec  4 16:41:04 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/board.h	Sat Nov 25 11:06:32 2006
+@@ -48,25 +48,26 @@
+ 	u8	det_pin;		/* Card detect */
+ 	u8	vcc_pin;		/* power switching */
+ 	u8	rst_pin;		/* card reset */
++	u8	chipselect;		/* EBI Chip Select number */
+ };
+ extern void __init at91_add_device_cf(struct at91_cf_data *data);
+ 
+  /* MMC / SD */
+ struct at91_mmc_data {
+ 	u8		det_pin;	/* card detect IRQ */
+-	unsigned	is_b:1;		/* uses B side (vs A) */
++	unsigned	slot_b:1;	/* uses Slot B */
+ 	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
+ 	u8		wp_pin;		/* (SD) writeprotect detect */
+ 	u8		vcc_pin;	/* power switching (high == on) */
+ };
+ extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+ 
+- /* Ethernet */
+-struct at91_eth_data {
++/* Ethernet (EMAC & MACB) */
++struct eth_platform_data {
+ 	u8		phy_irq_pin;	/* PHY IRQ */
+ 	u8		is_rmii;	/* using RMII interface? */
+ };
+-extern void __init at91_add_device_eth(struct at91_eth_data *data);
++extern void __init at91_add_device_eth(struct eth_platform_data *data);
+ 
+  /* USB Host */
+ struct at91_usbh_data {
+@@ -81,7 +82,8 @@
+ 	u8		rdy_pin;	/* ready/busy */
+ 	u8		ale;		/* address line number connected to ALE */
+ 	u8		cle;		/* address line number connected to CLE */
+-        struct mtd_partition* (*partition_info)(int, int*);
++	u8		bus_width_16;	/* buswidth is 16 bit */
++	struct mtd_partition* (*partition_info)(int, int*);
+ };
+ extern void __init at91_add_device_nand(struct at91_nand_data *data);
+ 
+@@ -112,4 +114,13 @@
+ extern u8 at91_leds_timer;
+ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+ 
++struct at91_gpio_led {
++	u8		index;		/* index of LED */
++	char*		name;		/* name of LED */
++	u8		gpio;		/* AT91_PIN_xx */
++	u8		flags;		/* 1=active-high */
++	char*		trigger;	/* default trigger */
++};
++extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
++
+ #endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/cpu.h linux-2.6.19/include/asm-arm/arch-at91rm9200/cpu.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/cpu.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/cpu.h	Wed Nov 15 11:59:16 2006
+@@ -0,0 +1,49 @@
++/*
++ * include/asm-arm/arch-at91rm9200/cpu.h
++ *
++ *  Copyright (C) 2006 SAN People
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#ifndef __ASM_ARCH_CPU_H
++#define __ASM_ARCH_CPU_H
++
++#include <asm/hardware.h>
++#include <asm/arch/at91_dbgu.h>
++
++
++#define ARCH_ID_AT91RM9200	0x09290780
++#define ARCH_ID_AT91SAM9260	0x019803a0
++#define ARCH_ID_AT91SAM9261	0x019703a0
++
++
++static inline unsigned long at91_cpu_identify(void)
++{
++	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
++}
++
++
++#ifdef CONFIG_ARCH_AT91RM9200
++#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
++#else
++#define cpu_is_at91rm9200()	(0)
++#endif
++
++#ifdef CONFIG_ARCH_AT91SAM9260
++#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
++#else
++#define cpu_is_at91sam9260()	(0)
++#endif
++
++#ifdef CONFIG_ARCH_AT91SAM9261
++#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
++#else
++#define cpu_is_at91sam9261()	(0)
++#endif
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/debug-macro.S linux-2.6.19/include/asm-arm/arch-at91rm9200/debug-macro.S
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/debug-macro.S	Tue May 30 11:42:13 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/debug-macro.S	Tue Oct 24 16:04:30 2006
+@@ -12,6 +12,7 @@
+ */
+ 
+ #include <asm/hardware.h>
++#include <asm/arch/at91_dbgu.h>
+ 
+ 	.macro	addruart,rx
+ 	mrc	p15, 0, \rx, c1, c0
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/entry-macro.S linux-2.6.19/include/asm-arm/arch-at91rm9200/entry-macro.S
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/entry-macro.S	Tue May 30 11:42:13 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/entry-macro.S	Tue Oct 24 16:15:21 2006
+@@ -11,6 +11,7 @@
+  */
+ 
+ #include <asm/hardware.h>
++#include <asm/arch/at91_aic.h>
+ 
+ 	.macro	disable_fiq
+ 	.endm
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/hardware.h linux-2.6.19/include/asm-arm/arch-at91rm9200/hardware.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/hardware.h	Mon Dec  4 16:41:04 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/hardware.h	Wed Nov 15 09:21:41 2006
+@@ -16,8 +16,16 @@
+ 
+ #include <asm/sizes.h>
+ 
++#if defined(CONFIG_ARCH_AT91RM9200)
+ #include <asm/arch/at91rm9200.h>
+-#include <asm/arch/at91rm9200_sys.h>
++#elif defined(CONFIG_ARCH_AT91SAM9260)
++#include <asm/arch/at91sam9260.h>
++#elif defined(CONFIG_ARCH_AT91SAM9261)
++#include <asm/arch/at91sam9261.h>
++#else
++#error "Unsupported AT91 processor"
++#endif
++
+ 
+ /*
+  * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
+@@ -34,29 +42,27 @@
+  * Virtual to Physical Address mapping for IO devices.
+  */
+ #define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+-#define AT91_VA_BASE_SPI	AT91_IO_P2V(AT91RM9200_BASE_SPI)
+ #define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+-#define AT91_VA_BASE_TWI	AT91_IO_P2V(AT91RM9200_BASE_TWI)
+-#define AT91_VA_BASE_MCI	AT91_IO_P2V(AT91RM9200_BASE_MCI)
+-#define AT91_VA_BASE_UDP	AT91_IO_P2V(AT91RM9200_BASE_UDP)
+ 
+  /* Internal SRAM is mapped below the IO devices */
+-#define AT91_SRAM_VIRT_BASE	(AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE)
++#define AT91_SRAM_MAX		SZ_1M
++#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+ 
+ /* Serial ports */
+-#define ATMEL_MAX_UART		5		/* 4 USART3's and one DBGU port */
++#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
+ 
+-/* FLASH */
+-#define AT91_FLASH_BASE		0x10000000	/* NCS0: Flash physical base address */
++/* External Memory Map */
++#define AT91_CHIPSELECT_0	0x10000000
++#define AT91_CHIPSELECT_1	0x20000000
++#define AT91_CHIPSELECT_2	0x30000000
++#define AT91_CHIPSELECT_3	0x40000000
++#define AT91_CHIPSELECT_4	0x50000000
++#define AT91_CHIPSELECT_5	0x60000000
++#define AT91_CHIPSELECT_6	0x70000000
++#define AT91_CHIPSELECT_7	0x80000000
+ 
+ /* SDRAM */
+-#define AT91_SDRAM_BASE		0x20000000	/* NCS1: SDRAM physical base address */
+-
+-/* SmartMedia */
+-#define AT91_SMARTMEDIA_BASE	0x40000000	/* NCS3: Smartmedia physical base address */
+-
+-/* Compact Flash */
+-#define AT91_CF_BASE		0x50000000	/* NCS4-NCS6: Compact Flash physical base address */
++#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
+ 
+ /* Clocks */
+ #define AT91_SLOW_CLOCK		32768		/* slow clock */
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/ics1523.h linux-2.6.19/include/asm-arm/arch-at91rm9200/ics1523.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/ics1523.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/ics1523.h	Tue Oct 17 08:29:21 2006
+@@ -0,0 +1,162 @@
++//*----------------------------------------------------------------------------
++//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
++//*----------------------------------------------------------------------------
++//* The software is delivered "AS IS" without warranty or condition of any
++//* kind, either express, implied or statutory. This includes without
++//* limitation any warranty or condition with respect to merchantability or
++//* fitness for any particular purpose, or against the infringements of
++//* intellectual property rights of others.
++//*----------------------------------------------------------------------------
++//* File Name           : ics1523.h
++//* Object              : Clock Generator Prototyping File.
++//*
++//* 1.0 08/28/02 ED     : Creation
++//* 1.2 13/01/03 FB		: Update on lib V3
++//*----------------------------------------------------------------------------
++
++#ifndef ics1523_h
++#define ics1523_h
++
++/* Standard configurations definitions */
++#define		Clock_Conf		0x0
++
++/*-------------------------------------------*/
++/* ICS1523 TWI Serial Clock Definition       */
++/*-------------------------------------------*/
++
++#define		ICS_MIN_CLOCK		100		/* Min Frequency Access Clock KHz */
++#define		ICS_MAX_CLOCK		400		/* Max Frequency Access Clock KHz */
++#define		ICS_TRANSFER_RATE	ICS_MAX_CLOCK	/* Transfer speed to apply */
++
++#define		ICS_WRITE_CLK_PNB	30		/* TWCK Clock Periods required to write */
++#define		ICS_READ_CLK_PNB	40		/* TWCK Clock Periods required to read */
++
++/*-------------------------------------------*/
++/* ICS1523 Write Operation Definition        */
++/*-------------------------------------------*/
++
++#define		ICS1523_ACCESS_OK	0		/* OK */
++#define		ICS1523_ACCESS_ERROR	-1		/* NOK */
++
++/*-------------------------------------------*/
++/* ICS1523 Device Addresses Definition       */
++/*-------------------------------------------*/
++
++#define		ICS_ADD			0x26		/* Device Address */
++
++/*--------------------------------------------------*/
++/* ICS1523 Registers Internal Addresses Definition  */
++/*--------------------------------------------------*/
++
++#define		ICS_ICR			0x0		/* Input Control Register */
++#define		ICS_LCR			0x1		/* Loop Control Register */
++#define		ICS_FD0			0x2		/* PLL FeedBack Divider LSBs */
++#define		ICS_FD1			0x3		/* PLL FeedBack Divider MSBs */
++#define		ICS_DPAO		0x4		/* Dynamic Phase Aligner Offset */
++#define		ICS_DPAC		0x5		/* Dynamic Phase Aligner Resolution */
++#define		ICS_OE			0x6		/* Output Enables Register */
++#define		ICS_OD			0x7		/* Osc Divider Register */
++#define		ICS_SWRST		0x8		/* DPA & PLL Reset Register */
++#define		ICS_VID			0x10		/* Chip Version Register */
++#define		ICS_RID			0x11		/* Chip Revision Register */
++#define		ICS_SR			0x12		/* Status Register */
++
++/*------------------------------------------------------*/
++/* ICS1523 Input Control Register Bits Definition       */
++/*------------------------------------------------------*/
++
++#define		ICS_PDEN		0x1		/* Phase Detector Enable */
++#define		ICS_PDPOL		0x2		/* Phase Detector Enable Polarity */
++#define		ICS_REFPOL		0x4		/* External Reference Polarity */
++#define		ICS_FBKPOL		0x8		/* External Feedback Polarity */
++#define		ICS_FBKSEL		0x10		/* External Feedback Select */
++#define		ICS_FUNCSEL		0x20		/* Function Out Select */
++#define		ICS_ENPLS		0x40		/* Enable PLL Lock/Ref Status Output */
++#define		ICS_ENDLS		0x80		/* Enable DPA Lock/Ref Status Output */
++
++/*-----------------------------------------------------*/
++/* ICS1523 Loop Control Register Bits Definition       */
++/*-----------------------------------------------------*/
++
++#define		ICS_PFD			0x7		/* Phase Detector Gain */
++#define		ICS_PSD			0x30		/* Post-Scaler Divider */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider LSBs Definition       */
++/*----------------------------------------------------*/
++
++#define		ICS_FBDL		0xFF		/* PLL FeedBack Divider LSBs */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider MSBs Definition       */
++/*----------------------------------------------------*/
++
++#define		ICS_FBDM		0xF		/* PLL FeedBack Divider MSBs */
++
++/*------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Offset Bits Definition       */
++/*------------------------------------------------------------*/
++
++#define		ICS_DPAOS		0x2F		/* Dynamic Phase Aligner Offset */
++#define		ICS_FILSEL		0x80		/* Loop Filter Select */
++
++/*----------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition       */
++/*----------------------------------------------------------------*/
++
++#define		ICS_DPARES		0x3		/* Dynamic Phase Aligner Resolution */
++#define		ICS_MMREV		0xFC		/* Metal Mask Revision Number */
++
++/*-------------------------------------------------------*/
++/* ICS1523 Output Enables Register Bits Definition       */
++/*-------------------------------------------------------*/
++
++#define		ICS_OEPCK		0x1		/* Output Enable for PECL PCLK Outputs */
++#define		ICS_OETCK		0x2		/* Output Enable for STTL CLK Output */
++#define		ICS_OEP2		0x4		/* Output Enable for PECL CLK/2 Outputs */
++#define		ICS_OET2		0x8		/* Output Enable for STTL CLK/2 Output */
++#define		ICS_OEF			0x10		/* Output Enable for STTL FUNC Output */
++#define		ICS_CLK2INV		0x20		/* CLK/2 Invert */
++#define		ICS_OSCL		0xC0		/* SSTL Clock Scaler */
++
++/*----------------------------------------------------*/
++/* ICS1523 Osc Divider Register Bits Definition       */
++/*----------------------------------------------------*/
++
++#define		ICS_OSCDIV		0x7F		/* Oscillator Divider Modulus */
++#define		ICS_INSEL		0x80		/* Input Select */
++
++/*---------------------------------------------------*/
++/* ICS1523 DPA & PLL Reset Register Definition       */
++/*---------------------------------------------------*/
++
++#define		ICS_DPAR		0x0A		/* DPA Reset Command */
++#define		ICS_PLLR		0x50		/* PLL Reset Command */
++
++/*------------------------------------------------*/
++/* ICS1523 Chip Version Register Definition       */
++/*------------------------------------------------*/
++
++#define		ICS_CHIPV		0xFF		/* Chip Version */
++
++/*-------------------------------------------------*/
++/* ICS1523 Chip Revision Register Definition       */
++/*-------------------------------------------------*/
++
++#define		ICS_CHIPR		0xFF		/* Chip Revision */
++
++/*------------------------------------------*/
++/* ICS1523 Status Register Definition       */
++/*------------------------------------------*/
++
++#define		ICS_DPALOCK		0x1		/* DPA Lock Status */
++#define		ICS_PLLLOCK		0x2		/* PLL Lock Status */
++
++/* Time constants definition */
++#define		TIMEOUT_OF_300us	3	// (10*100)us
++#define		TIMEOUT_OF_1000us	10	// (10*100)us
++
++/* Function Prototyping ics1523.c */
++int AT91F_ICS1523_clockinit(void);
++
++#endif /* ics1523_h */
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/irqs.h linux-2.6.19/include/asm-arm/arch-at91rm9200/irqs.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/irqs.h	Mon Dec  4 16:41:04 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/irqs.h	Tue Oct 24 16:15:59 2006
+@@ -21,6 +21,8 @@
+ #ifndef __ASM_ARCH_IRQS_H
+ #define __ASM_ARCH_IRQS_H
+ 
++#include <asm/arch/at91_aic.h>
++
+ #define NR_AIC_IRQS 32
+ 
+ 
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/spi.h linux-2.6.19/include/asm-arm/arch-at91rm9200/spi.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/spi.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/spi.h	Tue Oct 24 14:26:47 2006
+@@ -0,0 +1,54 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
++ *
++ * (c) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifndef AT91_LEGACY_SPI_H
++#define AT91_LEGACY_SPI_H
++
++#define SPI_MAJOR		153	/* registered device number */
++
++#define DEFAULT_SPI_CLK		6000000
++
++
++/* Maximum number of buffers in a single SPI transfer.
++ *  DataFlash uses maximum of 2
++ *  spidev interface supports up to 8.
++ */
++#define MAX_SPI_TRANSFERS	8
++#define NR_SPI_DEVICES		4	/* number of devices on SPI bus */
++
++/*
++ * Describes the buffers for a SPI transfer.
++ * A transmit & receive buffer must be specified for each transfer
++ */
++struct spi_transfer_list {
++	void* tx[MAX_SPI_TRANSFERS];	/* transmit */
++	int txlen[MAX_SPI_TRANSFERS];
++	void* rx[MAX_SPI_TRANSFERS];	/* receive */
++	int rxlen[MAX_SPI_TRANSFERS];
++	int nr_transfers;		/* number of transfers */
++	int curr;			/* current transfer */
++};
++
++struct spi_local {
++	unsigned int pcs;		/* Peripheral Chip Select value */
++
++	struct spi_transfer_list *xfers;	/* current transfer list */
++	dma_addr_t tx, rx;		/* DMA address for current transfer */
++	dma_addr_t txnext, rxnext;	/* DMA address for next transfer */
++};
++
++
++/* Exported functions */
++extern void spi_access_bus(short device);
++extern void spi_release_bus(short device);
++extern int spi_transfer(struct spi_transfer_list* list);
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/system.h linux-2.6.19/include/asm-arm/arch-at91rm9200/system.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/system.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/system.h	Mon Dec  4 16:00:33 2006
+@@ -22,6 +22,8 @@
+ #define __ASM_ARCH_SYSTEM_H
+ 
+ #include <asm/hardware.h>
++#include <asm/arch/at91_st.h>
++#include <asm/arch/at91_dbgu.h>
+ 
+ static inline void arch_idle(void)
+ {
+@@ -39,21 +41,13 @@
+ 	cpu_do_idle();
+ }
+ 
+-static inline void arch_reset(char mode)
+-{
+-	/*
+-	 * Perform a hardware reset with the use of the Watchdog timer.
+-	 */
+-	at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+-	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+-}
+-
+-#define ARCH_ID_AT91RM9200	0x09200080
+-#define ARCH_ID_AT91SAM9261	0x019000a0
++void (*at91_arch_reset)(void);
+ 
+-static inline unsigned long arch_identify(void)
++static inline void arch_reset(char mode)
+ {
+-	return at91_sys_read(AT91_DBGU_CIDR) & (AT91_CIDR_EPROC | AT91_CIDR_ARCH);
++	/* call the CPU-specific reset function */
++	if (at91_arch_reset)
++		(at91_arch_reset)();
+ }
+ 
+ #endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/timex.h linux-2.6.19/include/asm-arm/arch-at91rm9200/timex.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/timex.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/timex.h	Wed Nov 15 08:55:07 2006
+@@ -23,6 +23,15 @@
+ 
+ #include <asm/hardware.h>
+ 
++#if defined(CONFIG_ARCH_AT91RM9200)
++
+ #define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
+ 
++#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
++
++#define AT91SAM9_MASTER_CLOCK	99300000
++#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
++
++#endif
++
+ #endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/uncompress.h linux-2.6.19/include/asm-arm/arch-at91rm9200/uncompress.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/uncompress.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/uncompress.h	Tue Oct 24 16:11:39 2006
+@@ -22,11 +22,11 @@
+ #define __ASM_ARCH_UNCOMPRESS_H
+ 
+ #include <asm/hardware.h>
++#include <asm/arch/at91_dbgu.h>
+ 
+ /*
+  * The following code assumes the serial port has already been
+- * initialized by the bootloader.  We search for the first enabled
+- * port in the most probable order.  If you didn't setup a port in
++ * initialized by the bootloader.  If you didn't setup a port in
+  * your bootloader then nothing will appear (which might be desired).
+  *
+  * This does not append a newline
+diff -urN -x CVS linux-2.6.19-final/include/asm-arm/arch-at91rm9200/vmalloc.h linux-2.6.19/include/asm-arm/arch-at91rm9200/vmalloc.h
+--- linux-2.6.19-final/include/asm-arm/arch-at91rm9200/vmalloc.h	Mon Dec  4 16:34:19 2006
++++ linux-2.6.19/include/asm-arm/arch-at91rm9200/vmalloc.h	Wed Nov  1 15:26:48 2006
+@@ -21,6 +21,6 @@
+ #ifndef __ASM_ARCH_VMALLOC_H
+ #define __ASM_ARCH_VMALLOC_H
+ 
+-#define VMALLOC_END		(AT91_SRAM_VIRT_BASE & PGDIR_MASK)
++#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
+ 
+ #endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-avr32/arch-at32ap/at91_pdc.h linux-2.6.19/include/asm-avr32/arch-at32ap/at91_pdc.h
+--- linux-2.6.19-final/include/asm-avr32/arch-at32ap/at91_pdc.h	Thu Jan  1 02:00:00 1970
++++ linux-2.6.19/include/asm-avr32/arch-at32ap/at91_pdc.h	Tue Oct 24 15:32:59 2006
+@@ -0,0 +1,36 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91_pdc.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Peripheral Data Controller (PDC) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PDC_H
++#define AT91_PDC_H
++
++#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
++#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
++#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
++#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
++#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
++#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
++#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
++#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
++
++#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
++#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
++#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
++#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
++#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
++
++#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
++
++#endif
+diff -urN -x CVS linux-2.6.19-final/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h linux-2.6.19/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h
+--- linux-2.6.19-final/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h	Mon Dec  4 16:41:06 2006
++++ linux-2.6.19/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h	Thu Jan  1 02:00:00 1970
+@@ -1,36 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * Peripheral Data Controller (PDC) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91RM9200_PDC_H
+-#define AT91RM9200_PDC_H
+-
+-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
+-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
+-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
+-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
+-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
+-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
+-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
+-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
+-
+-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
+-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
+-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
+-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
+-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
+-
+-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
+-
+-#endif
+diff -urN -x CVS linux-2.6.19-final/include/linux/i2c-id.h linux-2.6.19/include/linux/i2c-id.h
+--- linux-2.6.19-final/include/linux/i2c-id.h	Mon Dec  4 16:41:13 2006
++++ linux-2.6.19/include/linux/i2c-id.h	Thu Oct 12 17:07:39 2006
+@@ -202,6 +202,7 @@
+ 
+ /* --- PCA 9564 based algorithms */
+ #define I2C_HW_A_ISA		0x1a0000 /* generic ISA Bus interface card */
++#define I2C_HW_A_PLAT		0x1a0001 /* generic platform_bus interface */
+ 
+ /* --- ACPI Embedded controller algorithms                              */
+ #define I2C_HW_ACPI_EC          0x1f0000
diff --git a/target/linux/at91-2.6/patches/001-vlink-machine.patch b/target/linux/at91-2.6/patches/001-vlink-machine.patch
new file mode 100644
index 0000000000..2c602bf8e9
--- /dev/null
+++ b/target/linux/at91-2.6/patches/001-vlink-machine.patch
@@ -0,0 +1,191 @@
+diff -Naur linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S linux/arch/arm/boot/compressed/head-at91rm9200.S
+--- linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S	2006-12-11 20:32:53.000000000 +0100
++++ linux/arch/arm/boot/compressed/head-at91rm9200.S	2007-01-20 10:26:21.000000000 +0100
+@@ -61,6 +61,12 @@
+ 		cmp	r7, r3
+ 		beq	99f
+ 
++    @ FDL Versalink : 1053
++    mov   r3, #(MACH_TYPE_VLINK & 0xff)
++    orr r3, r3, #(MACH_TYPE_VLINK & 0xff00)
++    cmp r7, r3
++    beq 99f
++						
+ 		@ Ajeco 1ARM : 1075
+ 		mov	r3,	#(MACH_TYPE_ONEARM & 0xff)
+ 		orr	r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
+diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c linux/arch/arm/mach-at91rm9200/board-vlink.c
+--- linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c	1970-01-01 01:00:00.000000000 +0100
++++ linux/arch/arm/mach-at91rm9200/board-vlink.c	2007-01-19 21:18:00.000000000 +0100
+@@ -0,0 +1,144 @@
++/*
++ * linux/arch/arm/mach-at91rm9200/board-ek.c
++ *
++ *  Copyright (C) 2006,2007 Hamish Guthrie
++ *                          Guthrie Consulting.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ *    0 .. 3 = USART0 .. USART3
++ *    4      = DBGU
++ */
++static struct at91_uart_config __initdata vlink_uart_config = {
++	.console_tty	= 0,				/* ttyS0 */
++	.nr_tty		= 5,
++	.tty_map	= { 4, 1, 0, 3, 2 }		/* ttyS0, ..., ttyS4 */
++};
++
++static void __init vlink_map_io(void)
++{
++	/* Initialize processor: 18.432 MHz crystal */
++	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
++
++	/* Setup the LEDs */
++//	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
++
++	/* Setup the serial ports and console */
++	at91_init_serial(&vlink_uart_config);
++}
++
++static void __init vlink_init_irq(void)
++{
++	at91rm9200_init_interrupts(NULL);
++}
++
++static struct eth_platform_data __initdata vlink_eth_data = {
++	.phy_irq_pin	= AT91_PIN_PC4,
++	.is_rmii	= 1,
++};
++
++static struct at91_usbh_data __initdata vlink_usbh_data = {
++	.ports		= 1,
++};
++
++static struct at91_udc_data __initdata vlink_udc_data = {
++	.vbus_pin	= AT91_PIN_PD4,
++	.pullup_pin	= AT91_PIN_PD5,
++};
++
++/*static struct at91_mmc_data __initdata ek_mmc_data = {
++	.det_pin	= AT91_PIN_PB27,
++	.is_b		= 0,
++	.wire4		= 1,
++	.wp_pin		= AT91_PIN_PA17,
++};
++*/
++
++static struct spi_board_info vlink_spi_devices[] = {
++	{	/* DataFlash chip */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 0,
++		.max_speed_hz	= 15 * 1000 * 1000,
++	},
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++	{	/* DataFlash card */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 3,
++		.max_speed_hz	= 15 * 1000 * 1000,
++	},
++#endif
++};
++
++static void __init vlink_board_init(void)
++{
++	/* Serial */
++	at91_add_device_serial();
++	/* Ethernet */
++	at91_add_device_eth(&vlink_eth_data);
++	/* USB Host */
++	at91_add_device_usbh(&vlink_usbh_data);
++	/* USB Device */
++	at91_add_device_udc(&vlink_udc_data);
++	at91_set_multi_drive(vlink_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
++	/* I2C */
++	at91_add_device_i2c();
++	/* SPI */
++	at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++	/* DataFlash card */
++//	at91_set_gpio_output(AT91_PIN_PB22, 0);
++#else
++	/* MMC */
++//	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
++//	at91_add_device_mmc(&vlink_mmc_data);
++#endif
++	/* VGA */
++}
++
++MACHINE_START(VLINK, "FDL VersaLink")
++	/* Maintainer: Guthrie Consulting */
++	.phys_io	= AT91_BASE_SYS,
++	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++	.boot_params	= AT91_SDRAM_BASE + 0x100,
++	.timer		= &at91rm9200_timer,
++	.map_io		= vlink_map_io,
++	.init_irq	= vlink_init_irq,
++	.init_machine	= vlink_board_init,
++MACHINE_END
+diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig linux/arch/arm/mach-at91rm9200/Kconfig
+--- linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig	2006-12-11 20:32:53.000000000 +0100
++++ linux/arch/arm/mach-at91rm9200/Kconfig	2007-01-19 21:17:49.000000000 +0100
+@@ -82,6 +82,12 @@
+ 	help
+ 	  Select this if you are using Sperry-Sun's KAFA board.
+ 
++config MACH_VLINK
++	bool "Figment Design Labs VersaLink"
++	depends on ARCH_AT91RM9200
++	help
++		Select this if you are using FDL's VersaLink board
++
+ endif
+ 
+ # ----------------------------------------------------------
+diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile linux/arch/arm/mach-at91rm9200/Makefile
+--- linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile	2006-12-11 20:32:53.000000000 +0100
++++ linux/arch/arm/mach-at91rm9200/Makefile	2007-01-19 21:17:42.000000000 +0100
+@@ -24,6 +24,7 @@
+ obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
+ obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
+ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
++obj-$(CONFIG_MACH_VLINK)  += board-vlink.o
+ 
+ # AT91SAM9260 board-specific support
+