ar71xx: create wndr3700 network config from uci-defaults

Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39373

3 files changed, 40 insertions, 97 deletions

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
deleted file mode 100644
index ad05525d2c..0000000000
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
+++ /dev/null
@@ -1,77 +0,0 @@
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	eth0.1
-	option type	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
-	option ip6assign 60
-
-config interface wan
-	option ifname	eth1
-	option proto	dhcp
-
-config interface wan6
-	option ifname	@wan
-	option proto	dhcpv6
-
-config globals globals
-	option ula_prefix auto
-
-config switch
-	option name	rtl8366s
-	option reset	1
-	option enable_vlan 1
-	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
-	option blinkrate	2
-
-config switch_vlan
-	option device	rtl8366s
-	option vlan 	1
-	option ports	"0 1 2 3 5t"
-
-config switch_port
-	# Port 1 controls the GREEN configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
-	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
-	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
-	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
-	# 14: Link (master); 15: separate register
-
-	option device		rtl8366s
-	option port		1
-	option led		6
-
-config switch_port
-	# Port 2 controls the ORANGE configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-	
-	option device		rtl8366s
-	option port		2
-	option led		9
-
-config switch_port
-	# Port 5 controls the configuration of the WAN LED and the
-	# section does not correspond to a real switch port.
-	#
-	# To toggle the use of green or orange LEDs for the WAN port,
-	# see the LED setting for wndr3700:green:wan in /etc/config/system.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-
-	option device		rtl8366s
-	option port		5
-	option led		2
diff --git a/target/linux/ar71xx/base-files/etc/init.d/defconfig b/target/linux/ar71xx/base-files/etc/init.d/defconfig
deleted file mode 100755
index 364fa4a6a5..0000000000
--- a/target/linux/ar71xx/base-files/etc/init.d/defconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-
-START=05
-
-start() {
-	. /lib/ar71xx.sh
-
-	local board=$(ar71xx_board_name)
-
-	[ ! -d /etc/defconfig/$board ] && return 0
-
-	for f in $( ls /etc/defconfig/$board ); do
-		if [ ! -e /etc/config/$f ]; then
-			cp /etc/defconfig/$board/$f /etc/config/
-		fi
-	done
-}
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index a7eeab017c..dac75ae051 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -321,6 +321,46 @@ ew-dorin-router)
 	ucidef_add_switch_vlan "switch0" "1" "0 2 3"
 	;;
 
+wndr3700)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	uci set network.@switch[-1].blinkrate='2'
+
+	ucidef_add_switch_port "switch0" "1"
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+	uci set network.@switch_port[-1].led='6'
+
+	ucidef_add_switch_port "switch0" "2"
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	uci set network.@switch_port[-1].led='9'
+
+	ucidef_add_switch_port "switch0" "5"
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	uci set network.@switch_port[-1].led='2'
+	;;
+
 *)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	;;