aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorKeith Maika <keithm@aoeex.com>2018-06-15 00:39:09 -0400
committerJohn Crispin <john@phrozen.org>2018-07-30 14:04:45 +0200
commit4caab808300ad75575d778bae6e184caa26aeabc (patch)
tree787765d5401038139b55a77be6e88172e30742f9
parenta3d2448fae5499356a31d71585a812ac65e7a39a (diff)
downloadupstream-4caab808300ad75575d778bae6e184caa26aeabc.tar.gz
upstream-4caab808300ad75575d778bae6e184caa26aeabc.tar.bz2
upstream-4caab808300ad75575d778bae6e184caa26aeabc.zip
ar71xx: add support for TP-Link Archer C59 v2
TP-Link Archer C59v2 is a dual-band AC1350 router based on Qualcomm/Atheros QCA9561+QCA9886 chips. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - UART header on PCB Flash instruction: - via web UI: 1. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin 2. Login to router and open the Advanced tab 3. Navigate to System Tools -> Firmware Upgrade 4. Upload firmware using the Manual Upgrade form - via TFTP: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Keith Maika <keithm@aoeex.com>
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt11
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c61
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic-tp-link.mk12
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c41
13 files changed, 134 insertions, 5 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index d15cff5111..af480cb001 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -129,6 +129,7 @@ archer-c7)
;;
archer-c58-v1|\
archer-c59-v1|\
+archer-c59-v2|\
archer-c60-v1|\
archer-c60-v2)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
@@ -137,7 +138,8 @@ archer-c60-v2)
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
case "$board" in
- archer-c59-v1)
+ archer-c59-v1|\
+ archer-c59-v2)
ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
;;
esac
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 3967dee94b..75c90a2701 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -249,6 +249,7 @@ ar71xx_setup_interfaces()
;;
archer-c58-v1|\
archer-c59-v1|\
+ archer-c59-v2|\
fritz4020|\
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 45b5d2adbb..fafdcce8f7 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -66,6 +66,7 @@ get_status_led() {
archer-c25-v1|\
archer-c58-v1|\
archer-c59-v1|\
+ archer-c59-v2|\
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 0ed624efc8..e08df23df6 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -168,6 +168,7 @@ case "$FIRMWARE" in
case $board in
archer-c58-v1|\
archer-c59-v1|\
+ archer-c59-v2|\
archer-c60-v1|\
archer-c60-v2|\
cf-e355ac-v2|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index a763938ecd..b58cf9b591 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -14,6 +14,7 @@ board=$(board_name)
case "$board" in
archer-c58-v1|\
archer-c59-v1|\
+ archer-c59-v2|\
archer-c60-v1|\
archer-c60-v2)
echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 27c4bec280..8f31f3ed70 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -492,6 +492,9 @@ ar71xx_board_detect() {
;;
*"Archer C59 v1")
name="archer-c59-v1"
+ ;;
+ *"Archer C59 v2")
+ name="archer-c59-v2"
;;
*"Archer C60 v1")
name="archer-c60-v1"
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 5a1f71b431..d469699d3c 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -212,6 +212,7 @@ platform_check_image() {
archer-c25-v1|\
archer-c58-v1|\
archer-c59-v1|\
+ archer-c59-v2|\
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index a1c6360ef5..8d25692ec8 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -52,6 +52,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V2 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index a6903d2939..7b82b42e0a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1575,6 +1575,17 @@ config ATH79_MACH_ARCHER_C59_V1
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C59_V2
+ bool "TP-LINK Archer C59 v2 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C60_V1
bool "TP-LINK Archer C60 v1 support"
select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
index c500c91a1a..6cc40e6a7b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -146,6 +146,49 @@ static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
},
};
+static struct gpio_led archer_c59_v2_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c59-v2:green:power",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v2:green:wlan2g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v2:green:wlan5g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v2:green:lan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v2:green:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v2:amber:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v2:green:wps",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v2:green:usb",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_USB,
+ .active_low = 1,
+ },
+};
+
static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
{
.desc = "Reset button",
@@ -215,9 +258,9 @@ static struct spi_board_info archer_c59_v1_spi_info[] = {
},
};
-static void __init archer_c5x_v1_setup(void)
+static void __init archer_c5x_v1_setup(u32 macLocation)
{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+ u8 *mac = (u8 *) KSEG1ADDR(macLocation);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
@@ -270,7 +313,7 @@ static void __init archer_c5x_v1_setup(void)
static void __init archer_c58_v1_setup(void)
{
- archer_c5x_v1_setup();
+ archer_c5x_v1_setup(0x1f010008);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio),
archer_c58_v1_leds_gpio);
}
@@ -280,10 +323,20 @@ MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1",
static void __init archer_c59_v1_setup(void)
{
- archer_c5x_v1_setup();
+ archer_c5x_v1_setup(0x1f010008);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
archer_c59_v1_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
"TP-LINK Archer C59 v1", archer_c59_v1_setup);
+
+static void __init archer_c59_v2_setup(void)
+{
+ archer_c5x_v1_setup(0x1f030008);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v2_leds_gpio),
+ archer_c59_v2_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V2, "ARCHER-C59-V2",
+ "TP-LINK Archer C59 v2", archer_c59_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 8328a6febc..0b959632db 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -47,6 +47,7 @@ enum ath79_mach_type {
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
+ ATH79_MACH_ARCHER_C59_V2, /* TP-LINK Archer C59 V2 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C60_V2, /* TP-LINK Archer C60 V2 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk
index 89983779e7..3c0a89d2b8 100644
--- a/target/linux/ar71xx/image/generic-tp-link.mk
+++ b/target/linux/ar71xx/image/generic-tp-link.mk
@@ -45,6 +45,18 @@ define Device/archer-c59-v1
endef
TARGET_DEVICES += archer-c59-v1
+define Device/archer-c59-v2
+ $(Device/archer-c59-v1)
+ DEVICE_TITLE := TP-LINK Archer C59 v2
+ BOARDNAME := ARCHER-C59-V2
+ TPLINK_BOARD_ID := ARCHER-C59-V2
+ DEVICE_PROFILE := ARCHERC59V2
+ IMAGE_SIZE := 14400k
+ MTDPARTS := spi0.0:128k(factory-boot)ro,64k(u-boot)ro,64k(mac)ro,14400k(firmware),1664k(tplink)ro,64k@0xff0000(art)ro
+ SUPPORTED_DEVICES := archer-c59-v2
+endef
+TARGET_DEVICES += archer-c59-v2
+
define Device/archer-c60-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C60 v1
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 92d44856e5..15eaa830d6 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -463,6 +463,46 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system",
},
+ /** Firmware layout for the C59v2 */
+ {
+ .id = "ARCHER-C59-V2",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:2.0.0 Build 20161206 rel.7303\n",
+
+ /** We're using a dynamic kernel/rootfs split here */
+ .partitions = {
+ {"factory-boot", 0x00000, 0x20000},
+ {"fs-uboot", 0x20000, 0x10000},
+ {"default-mac", 0x30000, 0x00200},
+ {"pin", 0x30200, 0x00200},
+ {"device-id", 0x30400, 0x00100},
+ {"product-info", 0x30500, 0x0fb00},
+ {"firmware", 0x40000, 0xe10000},
+ {"partition-table", 0xe50000, 0x10000},
+ {"soft-version", 0xe60000, 0x10000},
+ {"support-list", 0xe70000, 0x10000},
+ {"profile", 0xe80000, 0x10000},
+ {"default-config", 0xe90000, 0x10000},
+ {"user-config", 0xea0000, 0x40000},
+ {"usb-config", 0xee0000, 0x10000},
+ {"certificate", 0xef0000, 0x10000},
+ {"extra-para", 0xf00000, 0x10000},
+ {"qos-db", 0xf10000, 0x30000},
+ {"log", 0xfe0000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C60v1 */
{
.id = "ARCHER-C60-V1",
@@ -1550,6 +1590,7 @@ static void build_image(const char *output,
/* Some devices need the extra-para partition to accept the firmware */
if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 ||
+ strcasecmp(info->id, "ARCHER-C59-V2") == 0 ||
strcasecmp(info->id, "ARCHER-C60-V2") == 0 ||
strcasecmp(info->id, "TLWR1043NV5") == 0) {
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};