aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAnsuel Smith <ansuelsmth@gmail.com>2018-06-17 22:36:46 +0200
committerJohn Crispin <john@phrozen.org>2018-06-22 09:31:32 +0200
commit61d57a2f88b90ba951012e66c7c6fae9234c97b4 (patch)
tree3144338f2c11c0a4bb905fe0da6dcfb48d6c59d7
parentcb262b09396edd171eb3903e50ce5ddeb593f963 (diff)
downloadupstream-61d57a2f88b90ba951012e66c7c6fae9234c97b4.tar.gz
upstream-61d57a2f88b90ba951012e66c7c6fae9234c97b4.tar.bz2
upstream-61d57a2f88b90ba951012e66c7c6fae9234c97b4.zip
mac80211: ath10k add leds support
This adds support for leds handled by the wireless chipset. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-rw-r--r--package/kernel/mac80211/patches/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch617
1 files changed, 617 insertions, 0 deletions
diff --git a/package/kernel/mac80211/patches/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch b/package/kernel/mac80211/patches/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
new file mode 100644
index 0000000000..cb9ecb8574
--- /dev/null
+++ b/package/kernel/mac80211/patches/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
@@ -0,0 +1,617 @@
+From: Sebastian Gottschall <s.gottschall@newmedia-net.de>
+
+Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based
+chipsets with on chipset connected led's using WMI Firmware API. The LED
+device will get available named as "ath10k-phyX" at sysfs and can be controlled
+with various triggers. adds also debugfs interface for gpio control.
+
+This patch is specific for OpenWRt base, as is use old backported package
+with old wireless source. Support for QCA9984 is removed and a simbol
+is added to local-simbol file to export the actually compile the code
+with the ATH10K_LEDS simbol.
+
+
+Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
+Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
+[kvalo: major reorg and cleanup]
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+---
+
+v13:
+
+* only compile tested!
+
+* fix all checkpatch warnings
+
+* fix commit log
+
+* sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio)
+
+* unsigned -> unsigned int
+
+* remove GPIOLIB code, that should be added in a separate patch
+
+* rename gpio.c to leds.c
+
+* add leds.h
+
+* rename some functions:
+
+ ath10k_attach_led() -> ath10k_leds_register()
+ ath10k_unregister_led() -> ath10k_leds_unregister()
+ ath10k_reset_led_pin() -> ath10k_leds_start()
+
+* call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering
+
+* call ath10k_leds_start() only from ath10k_core_start() and not from mac.c
+
+* rename struct ath10k_gpiocontrol as anonymous function under struct
+ ath10k::leds, no need for memory allocation
+
+* merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller
+
+* remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it
+
+* Kconfig help text improvement and move it lower in the menu, also don't enable it by default
+
+* switch to set_brightness_blocking() so that the callback can sleep,
+ then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex
+ to access ar->state
+
+* don't touch ath10k_wmi_pdev_get_temperature()
+
+* as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface
+
+* remove debugfs interface, that should be added in another patch
+
+* cleanup includes
+
+
+ drivers/net/wireless/ath/ath10k/Kconfig | 10 +++
+ drivers/net/wireless/ath/ath10k/Makefile | 1 +
+ drivers/net/wireless/ath/ath10k/core.c | 22 +++++++
+ drivers/net/wireless/ath/ath10k/core.h | 9 ++-
+ drivers/net/wireless/ath/ath10k/hw.h | 1 +
+ drivers/net/wireless/ath/ath10k/leds.c | 103 ++++++++++++++++++++++++++++++
+ drivers/net/wireless/ath/ath10k/leds.h | 45 +++++++++++++
+ drivers/net/wireless/ath/ath10k/mac.c | 1 +
+ drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++++
+ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 +
+ drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++++
+ drivers/net/wireless/ath/ath10k/wmi.h | 35 ++++++++++
+ 12 files changed, 314 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/wireless/ath/ath10k/leds.c
+ create mode 100644 drivers/net/wireless/ath/ath10k/leds.h
+--- a/drivers/net/wireless/ath/ath10k/Kconfig
++++ b/drivers/net/wireless/ath/ath10k/Kconfig
+@@ -56,6 +56,16 @@ config ATH10K_DEBUGFS
+
+ If unsure, say Y to make it easier to debug problems.
+
++config ATH10K_LEDS
++ bool "Atheros ath10k LED support"
++ depends on ATH10K
++ select MAC80211_LEDS
++ select LEDS_CLASS
++ select NEW_LEDS
++ default y
++ ---help---
++ This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N.
++
+ config ATH10K_SPECTRAL
+ bool "Atheros ath10k spectral scan support"
+ depends on ATH10K_DEBUGFS
+--- a/drivers/net/wireless/ath/ath10k/Makefile
++++ b/drivers/net/wireless/ath/ath10k/Makefile
+@@ -18,6 +18,7 @@ ath10k_core-$(CPTCFG_ATH10K_SPECTRAL) +=
+ ath10k_core-$(CPTCFG_NL80211_TESTMODE) += testmode.o
+ ath10k_core-$(CPTCFG_ATH10K_TRACING) += trace.o
+ ath10k_core-$(CPTCFG_ATH10K_THERMAL) += thermal.o
++ath10k_core-$(CPTCFG_ATH10K_LEDS) += leds.o
+ ath10k_core-$(CPTCFG_MAC80211_DEBUGFS) += debugfs_sta.o
+ ath10k_core-$(CONFIG_PM) += wow.o
+
+--- a/local-symbols
++++ b/local-symbols
+@@ -144,6 +144,7 @@ ATH10K_DEBUG=
+ ATH10K_DEBUGFS=
+ ATH10K_SPECTRAL=
+ ATH10K_THERMAL=
++ATH10K_LEDS=
+ ATH10K_TRACING=
+ ATH10K_DFS_CERTIFIED=
+ WCN36XX=
+--- a/drivers/net/wireless/ath/ath10k/core.c
++++ b/drivers/net/wireless/ath/ath10k/core.c
+@@ -32,6 +32,7 @@
+ #include "htt.h"
+ #include "testmode.h"
+ #include "wmi-ops.h"
++#include "leds.h"
+
+ unsigned int ath10k_debug_mask;
+ static unsigned int ath10k_cryptmode_param;
+@@ -56,6 +57,7 @@ static const struct ath10k_hw_params ath
+ .id = QCA988X_HW_2_0_VERSION,
+ .dev_id = QCA988X_2_0_DEVICE_ID,
+ .name = "qca988x hw2.0",
++ .led_pin = 1,
+ .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+@@ -80,6 +82,7 @@ static const struct ath10k_hw_params ath
+ .id = QCA9887_HW_1_0_VERSION,
+ .dev_id = QCA9887_1_0_DEVICE_ID,
+ .name = "qca9887 hw1.0",
++ .led_pin = 1,
+ .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+@@ -199,6 +202,7 @@ static const struct ath10k_hw_params ath
+ .id = QCA99X0_HW_2_0_DEV_VERSION,
+ .dev_id = QCA99X0_2_0_DEVICE_ID,
+ .name = "qca99x0 hw2.0",
++ .led_pin = 17,
+ .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .otp_exe_param = 0x00000700,
+@@ -228,6 +232,7 @@ static const struct ath10k_hw_params ath
+ .id = QCA9984_HW_1_0_DEV_VERSION,
+ .dev_id = QCA9984_1_0_DEVICE_ID,
+ .name = "qca9984/qca9994 hw1.0",
++ .led_pin = 17,
+ .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
+@@ -262,6 +267,7 @@ static const struct ath10k_hw_params ath
+ .id = QCA9888_HW_2_0_DEV_VERSION,
+ .dev_id = QCA9888_2_0_DEVICE_ID,
+ .name = "qca9888 hw2.0",
++ .led_pin = 17,
+ .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
+@@ -2254,6 +2260,10 @@ int ath10k_core_start(struct ath10k *ar,
+ if (status)
+ goto err_hif_stop;
+
++ status = ath10k_leds_start(ar);
++ if (status)
++ goto err_hif_stop;
++
+ return 0;
+
+ err_hif_stop:
+@@ -2471,9 +2481,18 @@ static void ath10k_core_register_work(st
+ goto err_spectral_destroy;
+ }
+
++ status = ath10k_leds_register(ar);
++ if (status) {
++ ath10k_err(ar, "could not register leds: %d\n",
++ status);
++ goto err_thermal_unregister;
++ }
++
+ set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
+ return;
+
++err_thermal_unregister:
++ ath10k_thermal_unregister(ar);
+ err_spectral_destroy:
+ ath10k_spectral_destroy(ar);
+ err_debug_destroy:
+@@ -2515,6 +2534,8 @@ void ath10k_core_unregister(struct ath10
+ if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
+ return;
+
++ ath10k_leds_unregister(ar);
++
+ ath10k_thermal_unregister(ar);
+ /* Stop spectral before unregistering from mac80211 to remove the
+ * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
+--- a/drivers/net/wireless/ath/ath10k/core.h
++++ b/drivers/net/wireless/ath/ath10k/core.h
+@@ -24,6 +24,7 @@
+ #include <linux/pci.h>
+ #include <linux/uuid.h>
+ #include <linux/time.h>
++#include <linux/leds.h>
+
+ #include "htt.h"
+ #include "htc.h"
+@@ -789,7 +790,6 @@ struct ath10k {
+ u32 low_5ghz_chan;
+ u32 high_5ghz_chan;
+ bool ani_enabled;
+-
+ bool p2p;
+
+ struct {
+@@ -972,6 +972,13 @@ struct ath10k {
+ } testmode;
+
+ struct {
++ struct gpio_led wifi_led;
++ struct led_classdev cdev;
++ char label[48];
++ u32 gpio_state_pin;
++ } leds;
++
++ struct {
+ /* protected by data_lock */
+ u32 fw_crash_counter;
+ u32 fw_warm_reset_counter;
+--- a/drivers/net/wireless/ath/ath10k/hw.h
++++ b/drivers/net/wireless/ath/ath10k/hw.h
+@@ -490,6 +490,7 @@ struct ath10k_hw_params {
+ const char *name;
+ u32 patch_load_addr;
+ int uart_pin;
++ int led_pin;
+ u32 otp_exe_param;
+
+ /* Type of hw cycle counter wraparound logic, for more info
+--- /dev/null
++++ b/drivers/net/wireless/ath/ath10k/leds.c
+@@ -0,0 +1,103 @@
++/*
++ * Copyright (c) 2005-2011 Atheros Communications Inc.
++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
++ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com>
++ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/leds.h>
++
++#include "core.h"
++#include "wmi.h"
++#include "wmi-ops.h"
++
++#include "leds.h"
++
++static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev,
++ enum led_brightness brightness)
++{
++ struct ath10k *ar = container_of(led_cdev, struct ath10k,
++ leds.cdev);
++ struct gpio_led *led = &ar->leds.wifi_led;
++
++ mutex_lock(&ar->conf_mutex);
++
++ if (ar->state != ATH10K_STATE_ON)
++ goto out;
++
++ ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low;
++ ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin);
++
++out:
++ mutex_unlock(&ar->conf_mutex);
++
++ return 0;
++}
++
++int ath10k_leds_start(struct ath10k *ar)
++{
++ if (ar->hw_params.led_pin == 0)
++ /* leds not supported */
++ return 0;
++
++ /* under some circumstances, the gpio pin gets reconfigured
++ * to default state by the firmware, so we need to
++ * reconfigure it this behaviour has only ben seen on
++ * QCA9984 and QCA99XX devices so far
++ */
++ ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0,
++ WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE);
++ ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1);
++
++ return 0;
++}
++
++int ath10k_leds_register(struct ath10k *ar)
++{
++ int ret;
++
++ if (ar->hw_params.led_pin == 0)
++ /* leds not supported */
++ return 0;
++
++ snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s",
++ wiphy_name(ar->hw->wiphy));
++ ar->leds.wifi_led.active_low = 1;
++ ar->leds.wifi_led.gpio = ar->hw_params.led_pin;
++ ar->leds.wifi_led.name = ar->leds.label;
++ ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
++
++ ar->leds.cdev.name = ar->leds.label;
++ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
++
++ /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
++ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
++
++ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++void ath10k_leds_unregister(struct ath10k *ar)
++{
++ if (ar->hw_params.led_pin == 0)
++ /* leds not supported */
++ return;
++
++ led_classdev_unregister(&ar->leds.cdev);
++}
++
+--- /dev/null
++++ b/drivers/net/wireless/ath/ath10k/leds.h
+@@ -0,0 +1,41 @@
++/*
++ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++#ifndef _LEDS_H_
++#define _LEDS_H_
++
++#include "core.h"
++
++#ifdef CPTCFG_ATH10K_LEDS
++void ath10k_leds_unregister(struct ath10k *ar);
++int ath10k_leds_start(struct ath10k *ar);
++int ath10k_leds_register(struct ath10k *ar);
++#else
++static inline void ath10k_leds_unregister(struct ath10k *ar)
++{
++}
++
++static inline int ath10k_leds_start(struct ath10k *ar)
++{
++ return 0;
++}
++
++static inline int ath10k_leds_register(struct ath10k *ar)
++{
++ return 0;
++}
++
++#endif
++#endif /* _LEDS_H_ */
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -32,6 +32,7 @@
+ #include "wmi-tlv.h"
+ #include "wmi-ops.h"
+ #include "wow.h"
++#include "leds.h"
+
+ /*********/
+ /* Rates */
+--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
++++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
+@@ -197,6 +197,10 @@ struct wmi_ops {
+ (struct ath10k *ar,
+ enum wmi_bss_survey_req_type type);
+ struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value);
++ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num,
++ u32 input, u32 pull_type, u32 intr_mode);
++
++ struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set);
+ };
+
+ int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
+@@ -951,6 +955,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
+ }
+
++static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num,
++ u32 input, u32 pull_type, u32 intr_mode)
++{
++ struct sk_buff *skb;
++
++ if (!ar->wmi.ops->gen_gpio_config)
++ return -EOPNOTSUPP;
++
++ skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
++ if (IS_ERR(skb))
++ return PTR_ERR(skb);
++
++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid);
++}
++
++static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
++{
++ struct sk_buff *skb;
++
++ if (!ar->wmi.ops->gen_gpio_config)
++ return -EOPNOTSUPP;
++
++ skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set);
++ if (IS_ERR(skb))
++ return PTR_ERR(skb);
++
++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid);
++}
++
+ static inline int
+ ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level)
+ {
+--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
++++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+@@ -3619,6 +3619,8 @@ static const struct wmi_ops wmi_tlv_ops
+ .gen_echo = ath10k_wmi_tlv_op_gen_echo,
+ .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
+ .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
++ /* .gen_gpio_config not implemented */
++ /* .gen_gpio_output not implemented */
+ };
+
+ static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -6575,6 +6575,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
+ return skb;
+ }
+
++static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar,
++ u32 gpio_num, u32 input,
++ u32 pull_type, u32 intr_mode)
++{
++ struct wmi_gpio_config_cmd *cmd;
++ struct sk_buff *skb;
++
++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
++ if (!skb)
++ return ERR_PTR(-ENOMEM);
++
++ cmd = (struct wmi_gpio_config_cmd *)skb->data;
++ cmd->pull_type = __cpu_to_le32(pull_type);
++ cmd->gpio_num = __cpu_to_le32(gpio_num);
++ cmd->input = __cpu_to_le32(input);
++ cmd->intr_mode = __cpu_to_le32(intr_mode);
++
++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n",
++ gpio_num, input, pull_type, intr_mode);
++
++ return skb;
++}
++
++static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar,
++ u32 gpio_num, u32 set)
++{
++ struct wmi_gpio_output_cmd *cmd;
++ struct sk_buff *skb;
++
++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
++ if (!skb)
++ return ERR_PTR(-ENOMEM);
++
++ cmd = (struct wmi_gpio_output_cmd *)skb->data;
++ cmd->gpio_num = __cpu_to_le32(gpio_num);
++ cmd->set = __cpu_to_le32(set);
++
++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n",
++ gpio_num, set);
++
++ return skb;
++}
++
+ static struct sk_buff *
+ ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
+ enum wmi_sta_ps_mode psmode)
+@@ -8076,6 +8119,9 @@ static const struct wmi_ops wmi_ops = {
+ .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
+ .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
+ .gen_echo = ath10k_wmi_op_gen_echo,
++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
++
+ /* .gen_bcn_tmpl not implemented */
+ /* .gen_prb_tmpl not implemented */
+ /* .gen_p2p_go_bcn_ie not implemented */
+@@ -8146,6 +8192,8 @@ static const struct wmi_ops wmi_10_1_ops
+ .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+ .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
+ .gen_echo = ath10k_wmi_op_gen_echo,
++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ /* .gen_bcn_tmpl not implemented */
+ /* .gen_prb_tmpl not implemented */
+ /* .gen_p2p_go_bcn_ie not implemented */
+@@ -8217,6 +8265,8 @@ static const struct wmi_ops wmi_10_2_ops
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
+ .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+ .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ /* .gen_pdev_enable_adaptive_cca not implemented */
+ };
+
+@@ -8287,6 +8337,8 @@ static const struct wmi_ops wmi_10_2_4_o
+ .gen_pdev_enable_adaptive_cca =
+ ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
+ .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ /* .gen_bcn_tmpl not implemented */
+ /* .gen_prb_tmpl not implemented */
+ /* .gen_p2p_go_bcn_ie not implemented */
+@@ -8362,6 +8414,8 @@ static const struct wmi_ops wmi_10_4_ops
+ .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
+ .gen_echo = ath10k_wmi_op_gen_echo,
+ .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ };
+
+ int ath10k_wmi_attach(struct ath10k *ar)
+--- a/drivers/net/wireless/ath/ath10k/wmi.h
++++ b/drivers/net/wireless/ath/ath10k/wmi.h
+@@ -2899,6 +2899,41 @@ enum wmi_10_4_feature_mask {
+
+ };
+
++/* WMI_GPIO_CONFIG_CMDID */
++enum {
++ WMI_GPIO_PULL_NONE,
++ WMI_GPIO_PULL_UP,
++ WMI_GPIO_PULL_DOWN,
++};
++
++enum {
++ WMI_GPIO_INTTYPE_DISABLE,
++ WMI_GPIO_INTTYPE_RISING_EDGE,
++ WMI_GPIO_INTTYPE_FALLING_EDGE,
++ WMI_GPIO_INTTYPE_BOTH_EDGE,
++ WMI_GPIO_INTTYPE_LEVEL_LOW,
++ WMI_GPIO_INTTYPE_LEVEL_HIGH
++};
++
++/* WMI_GPIO_CONFIG_CMDID */
++struct wmi_gpio_config_cmd {
++ __le32 gpio_num; /* GPIO number to be setup */
++ __le32 input; /* 0 - Output/ 1 - Input */
++ __le32 pull_type; /* Pull type defined above */
++ __le32 intr_mode; /* Interrupt mode defined above (Input) */
++} __packed;
++
++/* WMI_GPIO_OUTPUT_CMDID */
++struct wmi_gpio_output_cmd {
++ __le32 gpio_num; /* GPIO number to be setup */
++ __le32 set; /* Set the GPIO pin*/
++} __packed;
++
++/* WMI_GPIO_INPUT_EVENTID */
++struct wmi_gpio_input_event {
++ __le32 gpio_num; /* GPIO number which changed state */
++} __packed;
++
+ struct wmi_ext_resource_config_10_4_cmd {
+ /* contains enum wmi_host_platform_type */
+ __le32 host_platform_config;