aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2017-10-14 10:44:39 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2018-01-15 00:12:13 +0100
commit5352669c2c470f2d2bb02deccfa758e1867e07b0 (patch)
treeefda6c467b3ab2f9a99d3e90e6bba45100a5ec18
parent53e3df2e71e992f7644420e7e362cc4a4a284edc (diff)
downloadupstream-5352669c2c470f2d2bb02deccfa758e1867e07b0.tar.gz
upstream-5352669c2c470f2d2bb02deccfa758e1867e07b0.tar.bz2
upstream-5352669c2c470f2d2bb02deccfa758e1867e07b0.zip
ramips: add support for ALFA Network AC1200RM
ALFA Network AC1200RM is an AC1200 router, with 5-port FE switch and USB 2.0 port. Device is based on MediaTek MT7620A + MT7612EN. Specification: - MT7620A (580 MHz) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet with passive PoE output in WAN and LAN4 - 2T2R 2.4 GHz (MT7620A) - 2T2R 5 GHz (MT7612EN) - 1x USB 2.0 - 9x LED (8 driven by GPIO) - 1x button (reset) - DC jack for main power input (12-24 V) - 2x UART, I2C, I2S and LED headers Flash instruction (do it under U-Boot, using UART and TFTP server): Select option "2: Load system code then write to Flash via TFTP" and use "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh13
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/AC1200RM.dts171
-rw-r--r--target/linux/ramips/image/mt7620.mk9
6 files changed, 193 insertions, 6 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 55976edec8..3e26493e54 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -56,6 +56,10 @@ air3gii)
set_wifi_led "$boardname:green:wlan"
set_usb_led "$boardname:green:mobile"
;;
+alfa-network,ac1200rm)
+ set_wifi_led "$boardname:green:wlan2g" "wlan1"
+ ucidef_set_led_default "wps" "wps" "$boardname:green:wps" "0"
+ ;;
all0256n-4M|\
all0256n-8M)
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 48fdfdf3f1..105f5e9e32 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -71,6 +71,7 @@ ramips_setup_interfaces()
;;
3g-6200n|\
ai-br100|\
+ alfa-network,ac1200rm|\
d240|\
db-wrt01|\
dir-300-b7|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 5ffa6368eb..e1d29152f1 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -69,6 +69,13 @@ get_status_led() {
ht-tm02)
status_led="$boardname:blue:wlan"
;;
+ alfa-network,ac1200rm|\
+ awapn2403|\
+ dir-645|\
+ sk-wb8|\
+ wrh-300cr)
+ status_led="$boardname:green:wps"
+ ;;
all0239-3g|\
dcs-930|\
dir-300-b1|\
@@ -102,12 +109,6 @@ get_status_led() {
ip2202)
status_led="$boardname:green:run"
;;
- awapn2403|\
- dir-645|\
- sk-wb8|\
- wrh-300cr)
- status_led="$boardname:green:wps"
- ;;
c108)
status_led="$boardname:green:lan"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8160f5d388..cd21001324 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -16,6 +16,7 @@ platform_check_image() {
a5-v11|\
ai-br100|\
air3gii|\
+ alfa-network,ac1200rm|\
all0239-3g|\
all0256n-4M|\
all0256n-8M|\
diff --git a/target/linux/ramips/dts/AC1200RM.dts b/target/linux/ramips/dts/AC1200RM.dts
new file mode 100644
index 0000000000..9305cb00e0
--- /dev/null
+++ b/target/linux/ramips/dts/AC1200RM.dts
@@ -0,0 +1,171 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of any
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
+ model = "ALFA Network AC1200RM";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "ac1200rm:green:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "ac1200rm:green:wps";
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-sources = <2>;
+ led-active-low;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "nd_sd", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 902677f3a9..6f9aa1aa6d 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -27,6 +27,15 @@ define Device/ai-br100
endef
TARGET_DEVICES += ai-br100
+define Device/alfa-network_ac1200rm
+ DTS := AC1200RM
+ IMAGE_SIZE := 16064k
+ DEVICE_TITLE := ALFA Network AC1200RM
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+ SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+endef
+TARGET_DEVICES += alfa-network_ac1200rm
+
define Device/Archer
TPLINK_HWREVADD := 0
TPLINK_HVERSION := 3