aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPavel Kubelun <be.dissent@gmail.com>2017-03-23 17:59:30 +0300
committerJohn Crispin <john@phrozen.org>2017-03-27 08:05:10 +0200
commitdc32d0a53cc01d9f644c6e9851b6770440d4b28c (patch)
tree3b4f94918573c80aadfb2c4ad53d267f4e4bb448
parent02fe9423372c036d1746189b488eb46e0c376491 (diff)
downloadupstream-dc32d0a53cc01d9f644c6e9851b6770440d4b28c.tar.gz
upstream-dc32d0a53cc01d9f644c6e9851b6770440d4b28c.tar.bz2
upstream-dc32d0a53cc01d9f644c6e9851b6770440d4b28c.zip
ipq806x: add ipq806x specific tsens driver
Current upstream driver doesnt fully support ipq806x devices ipq806x has 11 sensors, the upstream one doesn't allow to check sensors 0-4, only 5-10. A specific driver for ipq806x has been found in Qualcomm SDK repo. https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?h=release/endive_preview_cc&id=c089e464cd7ce652419a0dc44d7959ce4d24b8a5 https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?h=release/endive_preview_cc&id=c23d94b702c4182862e7f5051a2b7d00bb922a29 https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?h=release/endive_preview_cc&id=742f3684b62a6b9f082cb49404b1a92dc0b16bf5 https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?h=release/endive_preview_cc&id=c0a9b2e2a382c152fa128f5b864c800dd6dfb311 Merging it into LEDE with this commit. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi391
-rw-r--r--target/linux/ipq806x/patches-4.9/0030-clk-Disable-i2c-device-on-gsbi4.patch2
-rw-r--r--target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch638
-rw-r--r--target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch474
-rw-r--r--target/linux/ipq806x/patches-4.9/0063-ipq806x-clk-gcc-add-tsens-child-node.patch46
5 files changed, 1445 insertions, 106 deletions
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 3893f45637..dd55754106 100644
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -78,86 +78,354 @@
};
thermal-zones {
- cpu-thermal0 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ tsens_tz_sensor0 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 0>;
- thermal-sensors = <&gcc 5>;
- coefficients = <1132 0>;
+ trips {
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor3 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
trips {
- cpu_alert0: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
};
- cpu_crit0: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
};
};
};
- cpu-thermal1 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ tsens_tz_sensor4 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor5 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
+ };
+ };
+ };
- thermal-sensors = <&gcc 6>;
- coefficients = <1132 0>;
+ tsens_tz_sensor6 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 6>;
trips {
- cpu_alert1: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
};
- cpu_crit1: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
};
};
};
- cpu-thermal2 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ tsens_tz_sensor7 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 7>;
- thermal-sensors = <&gcc 7>;
- coefficients = <1199 0>;
+ trips {
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor8 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 8>;
trips {
- cpu_alert2: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
};
- cpu_crit2: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
};
};
};
- cpu-thermal3 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ tsens_tz_sensor9 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
+ };
+ };
+ };
- thermal-sensors = <&gcc 8>;
- coefficients = <1132 0>;
+ tsens_tz_sensor10 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 10>;
trips {
- cpu_alert3: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
+ cpu-critical-hi {
+ temperature = <125>;
+ hysteresis = <2>;
+ type = "critical_high";
};
- cpu_crit3: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
+
+ cpu-config-hi {
+ temperature = <105>;
+ hysteresis = <2>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95>;
+ hysteresis = <2>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2>;
+ type = "critical_low";
};
};
};
@@ -273,15 +541,14 @@
qfprom: qfprom@700000 {
compatible = "qcom,qfprom", "syscon";
- reg = <0x00700000 0x1000>;
+ reg = <0x700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges;
-
- tsens_calib: calib {
+ status = "okay";
+ tsens_calib: calib@400 {
reg = <0x400 0x10>;
};
- tsens_backup: backup_calib {
+ tsens_backup: backup@410 {
reg = <0x410 0x10>;
};
};
@@ -620,11 +887,17 @@
gcc: clock-controller@900000 {
compatible = "qcom,gcc-ipq8064";
reg = <0x00900000 0x4000>;
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
+ };
+
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,ipq8064-tsens";
+ reg = <0x900000 0x3680>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <0 178 0>;
#thermal-sensor-cells = <1>;
};
diff --git a/target/linux/ipq806x/patches-4.9/0030-clk-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.9/0030-clk-Disable-i2c-device-on-gsbi4.patch
index a4fe5480db..b2a6afe0dd 100644
--- a/target/linux/ipq806x/patches-4.9/0030-clk-Disable-i2c-device-on-gsbi4.patch
+++ b/target/linux/ipq806x/patches-4.9/0030-clk-Disable-i2c-device-on-gsbi4.patch
@@ -34,7 +34,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
.hw.init = &(struct clk_init_data){
.name = "gsbi1_h_clk",
.ops = &clk_branch_ops,
-++ .flags = CLK_IGNORE_UNUSED,
++ .flags = CLK_IGNORE_UNUSED,
},
},
};
diff --git a/target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch
new file mode 100644
index 0000000000..d8205c16e3
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch
@@ -0,0 +1,638 @@
+From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001
+From: Rajith Cherian <rajith@codeaurora.org>
+Date: Tue, 14 Feb 2017 18:30:43 +0530
+Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064
+
+Add TSENS driver template to support IPQ8064.
+This is a base file copied from tsens-8960.c
+
+Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7
+Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+
+ipq8064: tsens: TSENS driver support for IPQ8064
+
+Support for IPQ8064 tsens driver. The driver works
+with the thermal framework. The driver overrides the
+following fucntionalities:
+
+1. Get current temperature.
+2. Get/Set trip temperatures.
+3. Enabled/Disable trip points.
+4. ISR for threshold generated interrupt.
+5. Notify userspace when trip points are hit.
+
+Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918
+Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+---
+ .../devicetree/bindings/thermal/qcom-tsens.txt | 1 +
+ drivers/thermal/qcom/Makefile | 3 +-
+ drivers/thermal/qcom/tsens-ipq8064.c | 551 +++++++++++++++++++++
+ drivers/thermal/qcom/tsens.c | 3 +
+ drivers/thermal/qcom/tsens.h | 2 +-
+ 5 files changed, 558 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/thermal/qcom/tsens-ipq8064.c
+
+diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+index 292ed89..f4a76f6 100644
+--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
++++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+@@ -5,6 +5,7 @@ Required properties:
+ - "qcom,msm8916-tsens" : For 8916 Family of SoCs
+ - "qcom,msm8974-tsens" : For 8974 Family of SoCs
+ - "qcom,msm8996-tsens" : For 8996 Family of SoCs
++ - "qcom,ipq8064-tsens" : For IPQ8064
+
+ - reg: Address range of the thermal registers
+ - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
+index 2cc2193..cc07cf4 100644
+--- a/drivers/thermal/qcom/Makefile
++++ b/drivers/thermal/qcom/Makefile
+@@ -1,2 +1,3 @@
+ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
+-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
++qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o \
++ tsens-ipq8064.o
+diff --git a/drivers/thermal/qcom/tsens-ipq8064.c b/drivers/thermal/qcom/tsens-ipq8064.c
+new file mode 100644
+index 0000000..c52888f
+--- /dev/null
++++ b/drivers/thermal/qcom/tsens-ipq8064.c
+@@ -0,0 +1,551 @@
++/*
++ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/bitops.h>
++#include <linux/regmap.h>
++#include <linux/thermal.h>
++#include <linux/nvmem-consumer.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include "tsens.h"
++
++#define CAL_MDEGC 30000
++
++#define CONFIG_ADDR 0x3640
++/* CONFIG_ADDR bitmasks */
++#define CONFIG 0x9b
++#define CONFIG_MASK 0xf
++#define CONFIG_SHIFT 0
++
++#define STATUS_CNTL_8064 0x3660
++#define CNTL_ADDR 0x3620
++/* CNTL_ADDR bitmasks */
++#define EN BIT(0)
++#define SW_RST BIT(1)
++#define SENSOR0_EN BIT(3)
++#define SLP_CLK_ENA BIT(26)
++#define MEASURE_PERIOD 1
++#define SENSOR0_SHIFT 3
++
++/* INT_STATUS_ADDR bitmasks */
++#define MIN_STATUS_MASK BIT(0)
++#define LOWER_STATUS_CLR BIT(1)
++#define UPPER_STATUS_CLR BIT(2)
++#define MAX_STATUS_MASK BIT(3)
++
++#define THRESHOLD_ADDR 0x3624
++/* THRESHOLD_ADDR bitmasks */
++#define THRESHOLD_MAX_CODE 0xff
++#define THRESHOLD_MIN_CODE 0
++#define THRESHOLD_MAX_LIMIT_SHIFT 24
++#define THRESHOLD_MIN_LIMIT_SHIFT 16
++#define THRESHOLD_UPPER_LIMIT_SHIFT 8
++#define THRESHOLD_LOWER_LIMIT_SHIFT 0
++#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \
++ THRESHOLD_MAX_LIMIT_SHIFT)
++#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \
++ THRESHOLD_MIN_LIMIT_SHIFT)
++#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
++ THRESHOLD_UPPER_LIMIT_SHIFT)
++#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
++ THRESHOLD_LOWER_LIMIT_SHIFT)
++
++/* Initial temperature threshold values */
++#define LOWER_LIMIT_TH 0x9d /* 95C */
++#define UPPER_LIMIT_TH 0xa6 /* 105C */
++#define MIN_LIMIT_TH 0x0
++#define MAX_LIMIT_TH 0xff
++
++#define S0_STATUS_ADDR 0x3628
++#define STATUS_ADDR_OFFSET 2
++#define SENSOR_STATUS_SIZE 4
++#define INT_STATUS_ADDR 0x363c
++#define TRDY_MASK BIT(7)
++#define TIMEOUT_US 100
++
++#define TSENS_EN BIT(0)
++#define TSENS_SW_RST BIT(1)
++#define TSENS_ADC_CLK_SEL BIT(2)
++#define SENSOR0_EN BIT(3)
++#define SENSOR1_EN BIT(4)
++#define SENSOR2_EN BIT(5)
++#define SENSOR3_EN BIT(6)
++#define SENSOR4_EN BIT(7)
++#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \
++ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN)
++#define TSENS_8064_SENSOR5_EN BIT(8)
++#define TSENS_8064_SENSOR6_EN BIT(9)
++#define TSENS_8064_SENSOR7_EN BIT(10)
++#define TSENS_8064_SENSOR8_EN BIT(11)
++#define TSENS_8064_SENSOR9_EN BIT(12)
++#define TSENS_8064_SENSOR10_EN BIT(13)
++#define TSENS_8064_SENSORS_EN (SENSORS_EN | \
++ TSENS_8064_SENSOR5_EN | \
++ TSENS_8064_SENSOR6_EN | \
++ TSENS_8064_SENSOR7_EN | \
++ TSENS_8064_SENSOR8_EN | \
++ TSENS_8064_SENSOR9_EN | \
++ TSENS_8064_SENSOR10_EN)
++
++#define TSENS_8064_SEQ_SENSORS 5
++#define TSENS_8064_S4_S5_OFFSET 40
++#define TSENS_FACTOR 1000
++
++/* Trips: from very hot to very cold */
++enum tsens_trip_type {
++ TSENS_TRIP_STAGE3 = 0,
++ TSENS_TRIP_STAGE2,
++ TSENS_TRIP_STAGE1,
++ TSENS_TRIP_STAGE0,
++ TSENS_TRIP_NUM,
++};
++
++u32 tsens_8064_slope[] = {
++ 1176, 1176, 1154, 1176,
++ 1111, 1132, 1132, 1199,
++ 1132, 1199, 1132
++ };
++
++/* Temperature on y axis and ADC-code on x-axis */
++static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s)
++{
++ int degcbeforefactor, degc;
++
++ degcbeforefactor = (adc_code * s->slope) + s->offset;
++
++ if (degcbeforefactor == 0)
++ degc = degcbeforefactor;
++ else if (degcbeforefactor > 0)
++ degc = (degcbeforefactor + TSENS_FACTOR/2)
++ / TSENS_FACTOR;
++ else
++ degc = (degcbeforefactor - TSENS_FACTOR/2)
++ / TSENS_FACTOR;
++
++ return degc;
++}
++
++static int degC_to_code(int degC, const struct tsens_sensor *s)
++{
++ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2))
++ / s->slope;
++
++ if (code > THRESHOLD_MAX_CODE)
++ code = THRESHOLD_MAX_CODE;
++ else if (code < THRESHOLD_MIN_CODE)
++ code = THRESHOLD_MIN_CODE;
++ return code;
++}
++
++static int suspend_ipq8064(struct tsens_device *tmdev)
++{
++ int ret;
++ unsigned int mask;
++ struct regmap *map = tmdev->map;
++
++ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
++ if (ret)
++ return ret;
++
++ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
++ if (ret)
++ return ret;
++
++ mask = SLP_CLK_ENA | EN;
++
++ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int resume_ipq8064(struct tsens_device *tmdev)
++{
++ int ret;
++ struct regmap *map = tmdev->map;
++
++ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
++ if (ret)
++ return ret;
++
++ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
++ if (ret)
++ return ret;
++
++ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
++ if (ret)
++ return ret;
++
++ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static void notify_uspace_tsens_fn(struct work_struct *work)
++{
++ struct tsens_sensor *s = container_of(work, struct tsens_sensor,
++ notify_work);
++
++ sysfs_notify(&s->tzd->device.kobj, NULL, "type");
++}
++
++static void tsens_scheduler_fn(struct work_struct *work)
++{
++ struct tsens_device *tmdev = container_of(work, struct tsens_device,
++ tsens_work);
++ unsigned int threshold, threshold_low, code, reg, sensor, mask;
++ unsigned int sensor_addr;
++ bool upper_th_x, lower_th_x;
++ int adc_code, ret;
++
++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg);
++ if (ret)
++ return;
++ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR;
++ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, reg);
++ if (ret)
++ return;
++
++ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR);
++ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &threshold);
++ if (ret)
++ return;
++ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK)
++ >> THRESHOLD_LOWER_LIMIT_SHIFT;
++ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK)
++ >> THRESHOLD_UPPER_LIMIT_SHIFT;
++
++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg);
++ if (ret)
++ return;
++
++ ret = regmap_read(tmdev->map, CNTL_ADDR, &sensor);
++ if (ret)
++ return;
++ sensor &= (uint32_t) TSENS_8064_SENSORS_EN;
++ sensor >>= SENSOR0_SHIFT;
++
++ /* Constraint: There is only 1 interrupt control register for all
++ * 11 temperature sensor. So monitoring more than 1 sensor based
++ * on interrupts will yield inconsistent result. To overcome this
++ * issue we will monitor only sensor 0 which is the master sensor.
++ */
++
++ /* Skip if the sensor is disabled */
++ if (sensor & 1) {
++ ret = regmap_read(tmdev->map, tmdev->sensor[0].status, &code);
++ if (ret)
++ return;
++ upper_th_x = code >= threshold;
++ lower_th_x = code <= threshold_low;
++ if (upper_th_x)
++ mask |= UPPER_STATUS_CLR;
++ if (lower_th_x)
++ mask |= LOWER_STATUS_CLR;
++ if (upper_th_x || lower_th_x) {
++ /* Notify user space */
++ schedule_work(&tmdev->sensor[0].notify_work);
++ regmap_read(tmdev->map, sensor_addr, &adc_code);
++ pr_debug("Trigger (%d degrees) for sensor %d\n",
++ code_to_degC(adc_code, &tmdev->sensor[0]), 0);
++ }
++ }
++ regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask);
++
++ /* force memory to sync */
++ mb();
++}
++
++static irqreturn_t tsens_isr(int irq, void *data)
++{
++ struct tsens_device *tmdev = data;
++
++ schedule_work(&tmdev->tsens_work);
++ return IRQ_HANDLED;
++}
++
++static void hw_init(struct tsens_device *tmdev)
++{
++ int ret;
++ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0;
++ unsigned int reg_status_cntl = 0;
++
++ regmap_read(tmdev->map, CNTL_ADDR, &reg_cntl);
++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl | TSENS_SW_RST);
++
++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18)
++ | (((1 << tmdev->num_sensors) - 1) << SENSOR0_SHIFT);
++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++ regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_status_cntl);
++ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR
++ | MIN_STATUS_MASK | MAX_STATUS_MASK;
++ regmap_write(tmdev->map, STATUS_CNTL_8064, reg_status_cntl);
++ reg_cntl |= TSENS_EN;
++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++
++ regmap_read(tmdev->map, CONFIG_ADDR, &reg_cfg);
++ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT);
++ regmap_write(tmdev->map, CONFIG_ADDR, reg_cfg);
++
++ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT)
++ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT)
++ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT)
++ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT);
++
++ regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr);
++
++ ret = devm_request_irq(tmdev->dev, tmdev->tsens_irq, tsens_isr,
++ IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev);
++ if (ret < 0) {
++ pr_err("%s: request_irq FAIL: %d\n", __func__, ret);
++ return;
++ }
++
++ INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn);
++}
++
++static int init_ipq8064(struct tsens_device *tmdev)
++{
++ int ret, i;
++ u32 reg_cntl, offset = 0;
++
++ init_common(tmdev);
++ if (!tmdev->map)
++ return -ENODEV;
++
++ /*
++ * The status registers for each sensor are discontiguous
++ * because some SoCs have 5 sensors while others have more
++ * but the control registers stay in the same place, i.e
++ * directly after the first 5 status registers.
++ */
++ for (i = 0; i < tmdev->num_sensors; i++) {
++ if (i >= TSENS_8064_SEQ_SENSORS)
++ offset = TSENS_8064_S4_S5_OFFSET;
++
++ tmdev->sensor[i].status = S0_STATUS_ADDR + offset
++ + (i << STATUS_ADDR_OFFSET);
++ tmdev->sensor[i].slope = tsens_8064_slope[i];
++ INIT_WORK(&tmdev->sensor[i].notify_work,
++ notify_uspace_tsens_fn);
++ }
++
++ reg_cntl = SW_RST;
++ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
++ if (ret)
++ return ret;
++
++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
++ reg_cntl &= ~SW_RST;
++ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
++ CONFIG_MASK, CONFIG);
++
++ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
++ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++ if (ret)
++ return ret;
++
++ reg_cntl |= EN;
++ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int calibrate_ipq8064(struct tsens_device *tmdev)
++{
++ int i;
++ char *data, *data_backup;
++
++ ssize_t num_read = tmdev->num_sensors;
++ struct tsens_sensor *s = tmdev->sensor;
++
++ data = qfprom_read(tmdev->dev, "calib");
++ if (IS_ERR(data)) {
++ pr_err("Calibration not found.\n");
++ return PTR_ERR(data);
++ }
++
++ data_backup = qfprom_read(tmdev->dev, "calib_backup");
++ if (IS_ERR(data_backup)) {
++ pr_err("Backup calibration not found.\n");
++ return PTR_ERR(data_backup);
++ }
++
++ for (i = 0; i < num_read; i++) {
++ s[i].calib_data = readb_relaxed(data + i);
++ s[i].calib_data_backup = readb_relaxed(data_backup + i);
++
++ if (s[i].calib_data_backup)
++ s[i].calib_data = s[i].calib_data_backup;
++ if (!s[i].calib_data) {
++ pr_err("QFPROM TSENS calibration data not present\n");
++ return -ENODEV;
++ }
++ s[i].slope = tsens_8064_slope[i];
++ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope);
++ }
++
++ hw_init(tmdev);
++
++ return 0;
++}
++
++static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp)
++{
++ int ret;
++ u32 code, trdy;
++ const struct tsens_sensor *s = &tmdev->sensor[id];
++ unsigned long timeout;
++
++ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
++ do {
++ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
++ if (ret)
++ return ret;
++ if (!(trdy & TRDY_MASK))
++ continue;
++ ret = regmap_read(tmdev->map, s->status, &code);
++ if (ret)
++ return ret;
++ *temp = code_to_degC(code, s);
++ return 0;
++ } while (time_before(jiffies, timeout));
++
++ return -ETIMEDOUT;
++}
++
++static int set_trip_temp_ipq8064(void *data, int trip, int temp)
++{
++ unsigned int reg_th, reg_cntl;
++ int ret, code, code_chk, hi_code, lo_code;
++ const struct tsens_sensor *s = data;
++ struct tsens_device *tmdev = s->tmdev;
++
++ code_chk = code = degC_to_code(temp, s);
++
++ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
++ return -EINVAL;
++
++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_cntl);
++ if (ret)
++ return ret;
++
++ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &reg_th);
++ if (ret)
++ return ret;
++
++ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
++ >> THRESHOLD_UPPER_LIMIT_SHIFT;
++ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
++ >> THRESHOLD_LOWER_LIMIT_SHIFT;
++
++ switch (trip) {
++ case TSENS_TRIP_STAGE3:
++ code <<= THRESHOLD_MAX_LIMIT_SHIFT;
++ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
++ break;
++ case TSENS_TRIP_STAGE2:
++ if (code_chk <= lo_code)
++ return -EINVAL;
++ code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
++ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
++ break;
++ case TSENS_TRIP_STAGE1:
++ if (code_chk >= hi_code)
++ return -EINVAL;
++ code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
++ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
++ break;
++ case TSENS_TRIP_STAGE0:
++ code <<= THRESHOLD_MIN_LIMIT_SHIFT;
++ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_th | code);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int set_trip_activate_ipq8064(void *data, int trip,
++ enum thermal_trip_activation_mode mode)
++{
++ unsigned int reg_cntl, mask, val;
++ const struct tsens_sensor *s = data;
++ struct tsens_device *tmdev = s->tmdev;
++ int ret;
++
++ if (!tmdev || trip < 0)
++ return -EINVAL;
++
++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_cntl);
++ if (ret)
++ return ret;
++
++ switch (trip) {
++ case TSENS_TRIP_STAGE3:
++ mask = MAX_STATUS_MASK;
++ break;
++ case TSENS_TRIP_STAGE2:
++ mask = UPPER_STATUS_CLR;
++ break;
++ case TSENS_TRIP_STAGE1:
++ mask = LOWER_STATUS_CLR;
++ break;
++ case TSENS_TRIP_STAGE0:
++ mask = MIN_STATUS_MASK;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED)
++ val = reg_cntl | mask;
++ else
++ val = reg_cntl & ~mask;
++
++ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, val);
++ if (ret)
++ return ret;
++
++ /* force memory to sync */
++ mb();
++ return 0;
++}
++
++const struct tsens_ops ops_ipq8064 = {
++ .init = init_ipq8064,
++ .calibrate = calibrate_ipq8064,
++ .get_temp = get_temp_ipq8064,
++ .suspend = suspend_ipq8064,
++ .resume = resume_ipq8064,
++ .set_trip_temp = set_trip_temp_ipq8064,
++ .set_trip_activate = set_trip_activate_ipq8064,
++};
++
++const struct tsens_data data_ipq8064 = {
++ .num_sensors = 11,
++ .ops = &ops_ipq8064,
++};
+diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
+index 3f9fe6a..2d25593 100644
+--- a/drivers/thermal/qcom/tsens.c
++++ b/drivers/thermal/qcom/tsens.c
+@@ -72,6 +72,9 @@ static const struct of_device_id tsens_table[] = {
+ }, {
+ .compatible = "qcom,msm8996-tsens",
+ .data = &data_8996,
++ }, {
++ .compatible = "qcom,ipq8064-tsens",
++ .data = &data_ipq8064,
+ },
+ {}
+ };
+diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
+index 911c197..31279a2 100644
+--- a/drivers/thermal/qcom/tsens.h
++++ b/drivers/thermal/qcom/tsens.h
+@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
+ int init_common(struct tsens_device *);
+ int get_temp_common(struct tsens_device *, int, int *);
+
+-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
++extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064;
+
+ #endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch
new file mode 100644
index 0000000000..de9a8f8169
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch
@@ -0,0 +1,474 @@
+From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001
+From: Rajith Cherian <rajith@codeaurora.org>
+Date: Wed, 1 Feb 2017 19:00:26 +0530
+Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts
+
+Provide support for adding configurable high and
+configurable low trip temperatures. An interrupts is
+also triggerred when these trip points are hit. The
+interrupts can be activated or deactivated from sysfs.
+This functionality is made available only if
+CONFIG_THERMAL_WRITABLE_TRIPS is defined.
+
+Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934
+Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+---
+ .../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++
+ drivers/thermal/of-thermal.c | 63 ++++++++++++++++++----
+ drivers/thermal/qcom/tsens.c | 43 ++++++++++++---
+ drivers/thermal/qcom/tsens.h | 11 ++++
+ drivers/thermal/thermal_core.c | 44 ++++++++++++++-
+ include/linux/thermal.h | 14 +++++
+ 6 files changed, 162 insertions(+), 17 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+index f4a76f6..7c0a6a7 100644
+--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
++++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+@@ -12,11 +12,15 @@ Required properties:
+ - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
+ nvmem cells
+
++Optional properties:
++- interrupts: Interrupt which gets triggered when threshold is hit
++
+ Example:
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,msm8916-tsens";
+ reg = <0x4a8000 0x2000>;
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "caldata", "calsel";
++ interrupts = <0 178 0>;
+ #thermal-sensor-cells = <1>;
+ };
+diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
+index d04ec3b..d83697e 100644
+--- a/drivers/thermal/of-thermal.c
++++ b/drivers/thermal/of-thermal.c
+@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (!data->ops->get_temp)
++ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EINVAL;
+
+ return data->ops->get_temp(data->sensor_data, temp);
+@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct thermal_zone_device *tz,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (!data->ops || !data->ops->set_trips)
++ if (!data->ops || !data->ops->set_trips
++ || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EINVAL;
+
+ return data->ops->set_trips(data->sensor_data, low, high);
+@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
++ if (data->mode == THERMAL_DEVICE_DISABLED)
++ return -EINVAL;
++
+ return data->ops->set_emul_temp(data->sensor_data, temp);
+ }
+
+@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (!data->ops->get_trend)
++ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EINVAL;
+
+ return data->ops->get_trend(data->sensor_data, trip, trend);
+@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
+ mutex_unlock(&tz->lock);
+
+ data->mode = mode;
+- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
++
++ if (mode == THERMAL_DEVICE_ENABLED)
++ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+ return 0;
+ }
+@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (trip >= data->ntrips || trip < 0)
++ if (trip >= data->ntrips || trip < 0
++ || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EDOM;
+
+ *type = data->trips[trip].type;
+@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
+ return 0;
+ }
+
++static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
++ int trip, enum thermal_trip_activation_mode mode)
++{
++ struct __thermal_zone *data = tz->devdata;
++
++ if (trip >= data->ntrips || trip < 0
++ || (data->mode == THERMAL_DEVICE_DISABLED))
++ return -EDOM;
++
++ /*
++ * The configurable_hi and configurable_lo trip points can be
++ * activated and deactivated.
++ */
++
++ if (data->ops->set_trip_activate) {
++ int ret;
++
++ ret = data->ops->set_trip_activate(data->sensor_data,
++ trip, mode);
++ if (ret)
++ return ret;
++ }
++
++ return 0;
++}
++
+ static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
+ int *temp)
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (trip >= data->ntrips || trip < 0)
++ if (trip >= data->ntrips || trip < 0
++ || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EDOM;
+
+ *temp = data->trips[trip].temperature;
+@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (trip >= data->ntrips || trip < 0)
++ if (trip >= data->ntrips || trip < 0
++ || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EDOM;
+
+ if (data->ops->set_trip_temp) {
+@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (trip >= data->ntrips || trip < 0)
++ if (trip >= data->ntrips || trip < 0
++ || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EDOM;
+
+ *hyst = data->trips[trip].hysteresis;
+@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
+ {
+ struct __thermal_zone *data = tz->devdata;
+
+- if (trip >= data->ntrips || trip < 0)
++ if (trip >= data->ntrips || trip < 0
++ || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EDOM;
+
+ /* thermal framework should take care of data->mask & (1 << trip) */
+@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device_node *zone,
+ if (ops->set_emul_temp)
+ tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+
++ if (ops->set_trip_activate)
++ tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
++
+ mutex_unlock(&tzd->lock);
+
+ return tzd;
+@@ -726,7 +766,10 @@ static const char * const trip_types[] = {
+ [THERMAL_TRIP_ACTIVE] = "active",
+ [THERMAL_TRIP_PASSIVE] = "passive",
+ [THERMAL_TRIP_HOT] = "hot",
+- [THERMAL_TRIP_CRITICAL] = "critical",
++ [THERMAL_TRIP_CRITICAL] = "critical_high",
++ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
++ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
++ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
+ };
+
+ /**
+diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
+index 2d25593..ac68af3 100644
+--- a/drivers/thermal/qcom/tsens.c
++++ b/drivers/thermal/qcom/tsens.c
+@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, int *temp)
+
+ static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
+ {
+- const struct tsens_sensor *s = p;
++ struct tsens_sensor *s = p;
+ struct tsens_device *tmdev = s->tmdev;
+
+ if (tmdev->ops->get_trend)
+@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
+ return -ENOTSUPP;
+ }
+
+-static int __maybe_unused tsens_suspend(struct device *dev)
++static int __maybe_unused tsens_suspend(void *data)
+ {
+- struct tsens_device *tmdev = dev_get_drvdata(dev);
++ struct tsens_sensor *s = data;
++ struct tsens_device *tmdev = s->tmdev;
+
+ if (tmdev->ops && tmdev->ops->suspend)
+ return tmdev->ops->suspend(tmdev);
+@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend(struct device *dev)
+ return 0;
+ }
+
+-static int __maybe_unused tsens_resume(struct device *dev)
++static int __maybe_unused tsens_resume(void *data)
+ {
+- struct tsens_device *tmdev = dev_get_drvdata(dev);
++ struct tsens_sensor *s = data;
++ struct tsens_device *tmdev = s->tmdev;
+
+ if (tmdev->ops && tmdev->ops->resume)
+ return tmdev->ops->resume(tmdev);
+@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(struct device *dev)
+ return 0;
+ }
+
++static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
++{
++ struct tsens_sensor *s = data;
++ struct tsens_device *tmdev = s->tmdev;
++
++ if (tmdev->ops && tmdev->ops->set_trip_temp)
++ return tmdev->ops->set_trip_temp(s, trip, temp);
++
++ return 0;
++}
++
++static int __maybe_unused tsens_activate_trip_type(void *data, int trip,
++ enum thermal_trip_activation_mode mode)
++{
++ struct tsens_sensor *s = data;
++ struct tsens_device *tmdev = s->tmdev;
++
++ if (tmdev->ops && tmdev->ops->set_trip_activate)
++ return tmdev->ops->set_trip_activate(s, trip, mode);
++
++ return 0;
++}
++
++
+ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
+
+ static const struct of_device_id tsens_table[] = {
+@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
+ static const struct thermal_zone_of_device_ops tsens_of_ops = {
+ .get_temp = tsens_get_temp,
+ .get_trend = tsens_get_trend,
++ .set_trip_temp = tsens_set_trip_temp,
++ .set_trip_activate = tsens_activate_trip_type,
+ };
+
+ static int tsens_register(struct tsens_device *tmdev)
+@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_device *pdev)
+ if (id)
+ data = id->data;
+ else
+- data = &data_8960;
++ return -EINVAL;
+
+ if (data->num_sensors <= 0) {
+ dev_err(dev, "invalid number of sensors\n");
+@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_device *pdev)
+ tmdev->dev = dev;
+ tmdev->num_sensors = data->num_sensors;
+ tmdev->ops = data->ops;
++
++ tmdev->tsens_irq = platform_get_irq(pdev, 0);
++
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ if (data->hw_ids)
+ tmdev->sensor[i].hw_id = data->hw_ids[i];
+diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
+index 31279a2..54bbdc0 100644
+--- a/drivers/thermal/qcom/tsens.h
++++ b/drivers/thermal/qcom/tsens.h
+@@ -24,9 +24,12 @@ struct tsens_device;
+ struct tsens_sensor {
+ struct tsens_device *tmdev;
+ struct thermal_zone_device *tzd;
++ struct work_struct notify_work;
+ int offset;
+ int id;
+ int hw_id;
++ int calib_data;
++ int calib_data_backup;
+ int slope;
+ u32 status;
+ };
+@@ -41,6 +44,9 @@ struct tsens_sensor {
+ * @suspend: Function to suspend the tsens device
+ * @resume: Function to resume the tsens device
+ * @get_trend: Function to get the thermal/temp trend
++ * @set_trip_temp: Function to set trip temp
++ * @get_trip_temp: Function to get trip temp
++ * @set_trip_activate: Function to activate trip points
+ */
+ struct tsens_ops {
+ /* mandatory callbacks */
+@@ -53,6 +59,9 @@ struct tsens_ops {
+ int (*suspend)(struct tsens_device *);
+ int (*resume)(struct tsens_device *);
+ int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
++ int (*set_trip_temp)(void *, int, int);
++ int (*set_trip_activate)(void *, int,
++ enum thermal_trip_activation_mode);
+ };
+
+ /**
+@@ -76,11 +85,13 @@ struct tsens_context {
+ struct tsens_device {
+ struct device *dev;
+ u32 num_sensors;
++ u32 tsens_irq;
+ struct regmap *map;
+ struct regmap_field *status_field;
+ struct tsens_context ctx;
+ bool trdy;
+ const struct tsens_ops *ops;
++ struct work_struct tsens_work;
+ struct tsens_sensor sensor[0];
+ };
+
+diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
+index 226b0b4..20bd624 100644
+--- a/drivers/thermal/thermal_core.c
++++ b/drivers/thermal/thermal_core.c
+@@ -732,12 +732,48 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
+ return sprintf(buf, "passive\n");
+ case THERMAL_TRIP_ACTIVE:
+ return sprintf(buf, "active\n");
++ case THERMAL_TRIP_CONFIGURABLE_HI:
++ return sprintf(buf, "configurable_hi\n");
++ case THERMAL_TRIP_CONFIGURABLE_LOW:
++ return sprintf(buf, "configurable_low\n");
++ case THERMAL_TRIP_CRITICAL_LOW:
++ return sprintf(buf, "critical_low\n");
+ default:
+ return sprintf(buf, "unknown\n");
+ }
+ }
+
+ static ssize_t
++trip_point_type_activate(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct thermal_zone_device *tz = to_thermal_zone(dev);
++ int trip, ret;
++ char *enabled = "enabled";
++ char *disabled = "disabled";
++
++ if (!tz->ops->set_trip_activate)
++ return -EPERM;
++
++ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
++ return -EINVAL;
++
++ if (!strncmp(buf, enabled, strlen(enabled)))
++ ret = tz->ops->set_trip_activate(tz, trip,
++ THERMAL_TRIP_ACTIVATION_ENABLED);
++ else if (!strncmp(buf, disabled, strlen(disabled)))
++ ret = tz->ops->set_trip_activate(tz, trip,
++ THERMAL_TRIP_ACTIVATION_DISABLED);
++ else
++ ret = -EINVAL;
++
++ if (ret)
++ return ret;
++
++ return count;
++}
++
++static ssize_t
+ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+ {
+@@ -1321,7 +1357,7 @@ thermal_cooling_device_weight_store(struct device *dev,
+ */
+ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
+ int trip,
+- struct thermal_cooling_device *cdev,
++ struct thermal_cooling_device *cdev,
+ unsigned long upper, unsigned long lower,
+ unsigned int weight)
+ {
+@@ -1772,6 +1808,12 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
+ tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+
++ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
++ tz->trip_type_attrs[indx].attr.store
++ = trip_point_type_activate;
++ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
++ }
++
+ device_create_file(&tz->device,
+ &tz->trip_type_attrs[indx].attr);
+
+diff --git a/include/linux/thermal.h b/include/linux/thermal.h
+index 511182a..510a087 100644
+--- a/include/linux/thermal.h
++++ b/include/linux/thermal.h
+@@ -77,11 +77,19 @@ enum thermal_device_mode {
+ THERMAL_DEVICE_ENABLED,
+ };
+
++enum thermal_trip_activation_mode {
++ THERMAL_TRIP_ACTIVATION_DISABLED = 0,
++ THERMAL_TRIP_ACTIVATION_ENABLED,
++};
++
+ enum thermal_trip_type {
+ THERMAL_TRIP_ACTIVE = 0,
+ THERMAL_TRIP_PASSIVE,
+ THERMAL_TRIP_HOT,
+ THERMAL_TRIP_CRITICAL,
++ THERMAL_TRIP_CONFIGURABLE_HI,
++ THERMAL_TRIP_CONFIGURABLE_LOW,
++ THERMAL_TRIP_CRITICAL_LOW,
+ };
+
+ enum thermal_trend {
+@@ -118,6 +126,8 @@ struct thermal_zone_device_ops {
+ enum thermal_trip_type *);
+ int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
+ int (*set_trip_temp) (struct thermal_zone_device *, int, int);
++ int (*set_trip_activate) (struct thermal_zone_device *, int,
++ enum thermal_trip_activation_mode);
+ int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
+ int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
+ int (*get_crit_temp) (struct thermal_zone_device *, int *);
+@@ -360,6 +370,8 @@ struct thermal_genl_event {
+ * temperature.
+ * @set_trip_temp: a pointer to a function that sets the trip temperature on
+ * hardware.
++ * @activate_trip_type: a pointer to a function to enable/disable trip
++ * temperature interrupts
+ */
+ struct thermal_zone_of_device_ops {
+ int (*get_temp)(void *, int *);
+@@ -367,6 +379,8 @@ struct thermal_zone_of_device_ops {
+ int (*set_trips)(void *, int, int);
+ int (*set_emul_temp)(void *, int);
+ int (*set_trip_temp)(void *, int, int);
++ int (*set_trip_activate)(void *, int,
++ enum thermal_trip_activation_mode);
+ };
+
+ /**
diff --git a/target/linux/ipq806x/patches-4.9/0063-ipq806x-clk-gcc-add-tsens-child-node.patch b/target/linux/ipq806x/patches-4.9/0063-ipq806x-clk-gcc-add-tsens-child-node.patch
deleted file mode 100644
index 9f154aea26..0000000000
--- a/target/linux/ipq806x/patches-4.9/0063-ipq806x-clk-gcc-add-tsens-child-node.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 3064376aa3e8dae03dc2c5c3c064e2283c4337d8 Mon Sep 17 00:00:00 2001
-From: Pavel Kubelun <be.dissent@gmail.com>
-Date: Tue, 22 Nov 2016 17:37:56 +0300
-Subject: [PATCH 63/69] ipq806x: clk: gcc: add tsens child node
-
-Thermal sensors in ipq806x are inside a Global clock controller.
-Add a child node into it to be used by the TSENS driver.
-
-Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
----
- drivers/clk/qcom/gcc-ipq806x.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -970,7 +970,7 @@ static struct clk_branch gsbi1_h_clk = {
- .hw.init = &(struct clk_init_data){
- .name = "gsbi1_h_clk",
- .ops = &clk_branch_ops,
--+ .flags = CLK_IGNORE_UNUSED,
-+ .flags = CLK_IGNORE_UNUSED,
- },
- },
- };
-@@ -3073,6 +3073,7 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_matc
- static int gcc_ipq806x_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-+ struct platform_device *tsens;
- struct regmap *regmap;
- int ret;
-
-@@ -3102,6 +3103,13 @@ static int gcc_ipq806x_probe(struct plat
- regmap_write(regmap, 0x3cf8, 8);
- regmap_write(regmap, 0x3d18, 8);
-
-+ tsens = platform_device_register_data(&pdev->dev, "qcom-tsens", -1,
-+ NULL, 0);
-+ if (IS_ERR(tsens))
-+ return PTR_ERR(tsens);
-+
-+ platform_set_drvdata(pdev, tsens);
-+
- return 0;
- }
-