kirkwood: drop support for orphaned boards

No image build code for the Guruplug, Sheevaplug and NSA310S exists. Drop
support for the boards for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>

8 files changed, 5 insertions, 330 deletions

diff --git a/package/boot/uboot-envtools/files/kirkwood b/package/boot/uboot-envtools/files/kirkwood
index 3b770c12f4..cfd3550ea9 100644
--- a/package/boot/uboot-envtools/files/kirkwood
+++ b/package/boot/uboot-envtools/files/kirkwood
@@ -14,14 +14,11 @@ board=$(board_name)
 
 case "$board" in
 dockstar|\
-guruplug-server-plus|\
 ib62x0|\
 linksys-viper|\
 nsa310b|\
 nsa325|\
-pogo_e02|\
-sheevaplug|\
-sheevaplug-esata)
+pogo_e02)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
 linksys-audi)
diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile
index 929fca6aeb..94cc30bc06 100644
--- a/package/boot/uboot-kirkwood/Makefile
+++ b/package/boot/uboot-kirkwood/Makefile
@@ -64,10 +64,6 @@ define U-Boot/pogo_e02_second_stage
   NAME:=Cloud Engines Pogoplug E02 (second stage)
 endef
 
-define U-Boot/sheevaplug
-  NAME:=SheevaPlug
-endef
-
 UBOOT_TARGETS := \
 	dockstar dockstar_second_stage \
 	goflexhome \
@@ -75,8 +71,7 @@ UBOOT_TARGETS := \
 	iconnect iconnect_second_stage \
 	nsa310 \
 	nsa325 \
-	pogo_e02 pogo_e02_second_stage \
-	sheevaplug
+	pogo_e02 pogo_e02_second_stage
 
 define Build/Configure
 	$(if $(findstring _second_stage,$(BUILD_VARIANT)),
diff --git a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
index d6246dc934..04614f77cc 100644
--- a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
+++ b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
@@ -78,15 +78,6 @@
 +#include "openwrt-kirkwood-common.h"
 +
  #endif /* _CONFIG_POGO_E02_H */
---- a/include/configs/sheevaplug.h
-+++ b/include/configs/sheevaplug.h
-@@ -96,4 +96,6 @@
- #define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
- #endif /* CONFIG_IDE */
- 
-+#include "openwrt-kirkwood-common.h"
-+
- #endif /* _CONFIG_SHEEVAPLUG_H */
 --- a/include/configs/goflexhome.h
 +++ b/include/configs/goflexhome.h
 @@ -105,4 +105,6 @@
@@ -175,15 +166,3 @@
 +CONFIG_FIT_VERBOSE=y
 +CONFIG_LZMA=y
 +CONFIG_LZO=y
---- a/configs/sheevaplug_defconfig
-+++ b/configs/sheevaplug_defconfig
-@@ -28,5 +28,8 @@ CONFIG_SYS_NS16550=y
- CONFIG_USB=y
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_STORAGE=y
--CONFIG_LZMA=y
- CONFIG_OF_LIBFDT=y
-+CONFIG_FIT=y
-+CONFIG_FIT_VERBOSE=y
-+CONFIG_LZMA=y
-+CONFIG_LZO=y
diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds
index 0d89759180..a0b4eca04f 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/01_leds
+++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds
@@ -34,9 +34,6 @@ case "$board" in
 	ucidef_set_led_default "health" "health" "pogo_e02:green:health" "1"
 	ucidef_set_led_default "fault" "fault" "pogo_e02:orange:fault" "1"
 	;;
-"guruplug-server-plus")
-	ucidef_set_led_timer "health" "health" "guruplug:red:health" "200" "800"
-	;;
 "nsa310b")
 	ucidef_set_led_default "health" "health" "nsa310:green:sys" "1"
 	ucidef_set_led_usbhost "usb" "USB" "nsa310:green:usb"
@@ -49,10 +46,6 @@ case "$board" in
 	ucidef_set_led_ataport "hdd1" "HDD1" "nsa325:green:sata1" "1"
 	ucidef_set_led_ataport "hdd2" "HDD2" "nsa325:green:sata2" "2"
 	;;
-"sheevaplug" | \
-"sheevaplug-esata")
-	ucidef_set_led_timer "health" "health" "sheevaplug:blue:health" "200" "800"
-	;;
 *)
 	;;
 esac
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index 85049d2968..549d232df9 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -16,15 +16,9 @@ case "$board" in
 "goflexnet"|\
 "ib62x0"|\
 "iconnect"|\
-"nsa310s"|\
-"pogo_e02"|\
-"sheevaplug"|\
-"sheevaplug-esata")
+"pogo_e02")
 	ucidef_set_interface_lan "eth0" "dhcp"
 	;;
-"guruplug-server-plus")
-	ucidef_set_interface_lan "eth0 eth1" "dhcp"
-	;;
 "linksys-audi"|\
 "linksys-viper")
 	ucidef_add_switch "switch0" \
diff --git a/target/linux/kirkwood/base-files/lib/kirkwood.sh b/target/linux/kirkwood/base-files/lib/kirkwood.sh
index f1229fa97b..6474b06176 100755
--- a/target/linux/kirkwood/base-files/lib/kirkwood.sh
+++ b/target/linux/kirkwood/base-files/lib/kirkwood.sh
@@ -49,26 +49,10 @@ kirkwood_board_detect() {
 		name="linksys-viper"
 		;;
 
-	"Globalscale Technologies Guruplug Server Plus")
-		name="guruplug-server-plus"
-		;;
-
-	"Globalscale Technologies SheevaPlug")
-		name="sheevaplug"
-		;;
-
-	"Globalscale Technologies eSATA SheevaPlug")
-		name="sheevaplug-esata"
-		;;
-
 	"ZyXEL NSA310b")
 		name="nsa310b"
 		;;
 
-	"ZyXEL NSA310S")
-		name="nsa310s"
-		;;
-
 	"ZyXEL NSA325")
 		name="nsa325"
 		;;
diff --git a/target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch b/target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch
deleted file mode 100644
index 0e69f0cfa4..0000000000
--- a/target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch
+++ /dev/null
@@ -1,267 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -239,6 +239,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-nsa310.dtb \
- 	kirkwood-nsa310a.dtb \
- 	kirkwood-nsa310b.dtb \
-+	kirkwood-nsa310s.dtb \
- 	kirkwood-nsa320.dtb \
- 	kirkwood-nsa325.dtb \
- 	kirkwood-openblocks_a6.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
-@@ -0,0 +1,254 @@
-+/dts-v1/;
-+
-+#include "kirkwood-nsa3x0-common.dtsi"
-+
-+/ {
-+	model = "ZyXEL NSA310S";
-+	compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+		stdout-path = &uart0;
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pinctrl-names = "default";
-+
-+			pmx_sata0: pmx-sata0 {
-+				marvell,pins;
-+				marvell,function = "sata0";
-+			};
-+
-+			pmx_sata1: pmx-sata1 {
-+				marvell,pins;
-+				marvell,function = "sata1";
-+			};
-+
-+			pmx_usb_power: pmx-usb-power {
-+				marvell,pins = "mpp21";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_pwr_off: pmx-pwr-off {
-+				marvell,pins = "mpp27";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp24";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_btn_copy: pmx-btn-copy {
-+				marvell,pins = "mpp25";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_btn_power: pmx-btn-power {
-+				marvell,pins = "mpp26";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_hdd2_green: pmx-led-hdd2-green {
-+				marvell,pins = "mpp34";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_hdd2_red: pmx-led-hdd2-red {
-+				marvell,pins = "mpp12";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_usb_green: pmx-led-usb-green {
-+				marvell,pins = "mpp15";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_copy_green: pmx-led-copy-green {
-+				marvell,pins = "mpp22";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_copy_red: pmx-led-copy-red {
-+				marvell,pins = "mpp23";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_sys_green: pmx-led-sys-green {
-+				marvell,pins = "mpp28";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_sys_orange: pmx-led-sys-orange {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_hdd1_green: pmx-led-hdd1-green {
-+				marvell,pins = "mpp16";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_hdd1_red: pmx-led-hdd1-red {
-+				marvell,pins = "mpp13";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_pwr_sata1: pmx-pwr-sata1 {
-+				marvell,pins = "mpp33";
-+				marvell,function = "gpio";
-+			};
-+
-+		};
-+
-+		i2c@11000 {
-+			status = "okay";
-+
-+			ht1382: rtc@68 {
-+				compatible = "htk,ht1382";
-+				reg = <0x68>;
-+			};
-+		};
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_pwr_sata1>;
-+		pinctrl-names = "default";
-+
-+		usb0_power: regulator@1 {
-+			enable-active-high;
-+		};
-+
-+		sata1_power: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "SATA1 Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			enable-active-high;
-+			gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	gpio_keys {
-+		power {
-+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-+		};
-+		copy {
-+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+		};
-+		reset {
-+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		green-sys {
-+			label = "nsa310s:green:sys";
-+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+		};
-+		orange-sys {
-+			label = "nsa310s:orange:sys";
-+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd1 {
-+			label = "nsa310s:green:hdd1";
-+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd1 {
-+			label = "nsa310s:red:hdd1";
-+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd2 {
-+			label = "nsa310s:green:hdd2";
-+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd2 {
-+			label = "nsa310s:red:hdd2";
-+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-usb {
-+			label = "nsa310s:green:usb";
-+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-copy {
-+			label = "nsa310s:green:copy";
-+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-copy {
-+			label = "nsa310s:red:copy";
-+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	gpio_poweroff {
-+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	chip-delay = <35>;
-+
-+	partition@0 {
-+		label = "uboot";
-+		reg = <0x0000000 0xe0000>;
-+		read-only;
-+	};
-+
-+	partition@e0000 {
-+		label = "uboot_env";
-+		reg = <0xe0000 0x100000>;
-+	};
-+
-+	partition@100000 {
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
-+	};
-+
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0x7e00000>;
-+	};
-+};
-+
-+&sata {
-+	status = "okay";
-+	nr-ports = <2>;
-+};
-+
-+&mdio {
-+	status = "okay";
-+	ethphy0: ethernet-phy@1 {
-+		compatible = "marvell,88e1318s";
-+		reg = <1>;
-+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
-+							<0x1 0x10 0x0 0x1017>,
-+							<0x1 0x11 0x0 0x4408>,
-+							<0x1 0x16 0x0 0x0>,
-+							<0x1 0x4 0x0 0x1e1>,
-+							<0x1 0x9 0x0 0x300>,
-+							<0x1 0x10 0x0 0x3860>,
-+							<0x1 0x0 0x0 0x9140>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-4.9/108-on100.patch b/target/linux/kirkwood/patches-4.9/108-on100.patch
index 28c3e535d2..3cab70aaa8 100644
--- a/target/linux/kirkwood/patches-4.9/108-on100.patch
+++ b/target/linux/kirkwood/patches-4.9/108-on100.patch
@@ -163,8 +163,8 @@
 +};
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -242,6 +242,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-nsa310s.dtb \
+@@ -241,6 +241,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-nsa310b.dtb \
  	kirkwood-nsa320.dtb \
  	kirkwood-nsa325.dtb \
 +	kirkwood-on100.dtb \