bcm53xx: backport upstream DTS files for Linksys devices

We dont't build officialy images for them yet due to partitioning
issues.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

3 files changed, 92 insertions, 16 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/046-0010-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch b/target/linux/bcm53xx/patches-4.4/046-0010-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
new file mode 100644
index 0000000000..ca2b7387c0
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/046-0010-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
@@ -0,0 +1,72 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9200
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's tri-band wireless home router based on BCM4709A0 with 3 x BCM43602
+chipsets. LEDs will be hopefully added later to the DT.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                   |  1 +
+ arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 42 ++++++++++++++++++++++++++++
+ 2 files changed, 43 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm47081-luxul-xwr-1200.dtb \
+ 	bcm4709-asus-rt-ac87u.dtb \
+ 	bcm4709-buffalo-wxr-1900dhp.dtb \
++	bcm4709-linksys-ea9200.dtb \
+ 	bcm4709-netgear-r7000.dtb \
+ 	bcm4709-netgear-r8000.dtb \
+ 	bcm4709-tplink-archer-c9-v1.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+@@ -0,0 +1,42 @@
++/*
++ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4709.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
++	model = "Linksys EA9200";
++
++	chosen {
++		bootargs = "console=ttyS0,115200";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000
++		       0x88000000 0x08000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		wps {
++			label = "WPS";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++		};
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
diff --git a/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.4/046-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
index 00840cdf2b..93bf80c29b 100644
--- a/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
+++ b/target/linux/bcm53xx/patches-4.4/046-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
@@ -1,11 +1,22 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Linksys EA6300 V1
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
 
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
+wireless chipsets. LEDs will be hopefully added later to the DT.
+According to some sources it may use the same board as EA6400 and just
+differ by an original vendor firmware.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 ---
+ arch/arm/boot/dts/Makefile                      |  1 +
+ arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++
+ 2 files changed, 42 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -18,14 +29,11 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  	bcm4708-netgear-r6250.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -0,0 +1,48 @@
+@@ -0,0 +1,41 @@
 +/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Linksys EA6300 V1
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
++ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
 + *
-+ * Licensed under the GNU/GPL. See COPYING for details.
++ * Licensed under the ISC license.
 + */
 +
 +/dts-v1/;
@@ -34,7 +42,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 +#include "bcm5301x-nand-cs0-bch8.dtsi"
 +
 +/ {
-+	compatible = "linksys,ea6300v1", "brcm,bcm4708";
++	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
 +	model = "Linksys EA6300 V1";
 +
 +	chosen {
@@ -63,7 +71,3 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 +		};
 +	};
 +};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
index 4e59657012..859985c5f2 100644
--- a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
@@ -9,9 +9,9 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-asus-rt-ac87u.dtb \
+@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  	bcm4709-buffalo-wxr-1900dhp.dtb \
+ 	bcm4709-linksys-ea9200.dtb \
  	bcm4709-netgear-r7000.dtb \
 +	bcm4709-netgear-r7900.dtb \
  	bcm4709-netgear-r8000.dtb \