ramips: add Poray X5/X6 Support

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37638

8 files changed, 158 insertions, 3 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 57c8beb6c2..d04d990665 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -138,6 +138,9 @@ get_status_led() {
 	ur-336un)
 		status_led="ur336:green:wps"
 		;;
+	x5)
+		status_led="x5:green:power"
+		;;
 	xdxrn502j)
 		status_led="xdxrn502j:green:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 133c2decb9..fa5b28ea95 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -227,7 +227,8 @@ ramips_setup_macs()
 		;;
 
 	m3 |\
-	m4)
+	m4 |\
+	x5)
 		lan_mac=$(mtd_get_mac_binary factory 4)
 		lan_mac=$(macaddr_add "$lan_mac" -1)
 		;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index f9aabd5c4e..30732339f1 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -76,7 +76,8 @@ preinit_set_mac_address() {
 		ifconfig eth0 hw ether $mac 2>/dev/null
 		;;
 	m3 |\
-	m4)
+	m4 |\
+	x5)
 		mac=$(mtd_get_mac_binary factory 4)
 		mac=$(macaddr_add "$mac" -1)
 		ifconfig eth0 hw ether $mac 2>/dev/null
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index e3776f1304..1bf93e30bf 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -154,6 +154,9 @@ ramips_board_detect() {
 	*"Poray M4")
 		name="m4"
 		;;
+	*"Poray X5")
+		name="x5"
+		;;
 	*"PWH2004")
 		name="pwh2004"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 5e1a7a5651..4b80afa966 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -75,7 +75,8 @@ platform_check_image() {
 	whr-g300n |\
 	ur-326n4g |\
 	ur-336un |\
-	wr512-3gn)
+	wr512-3gn |\
+	x5)
 		[ "$magic" != "27051956" ] && {
 			echo "Invalid image type."
 			return 1
diff --git a/target/linux/ramips/dts/X5.dts b/target/linux/ramips/dts/X5.dts
new file mode 100644
index 0000000000..d9e963239f
--- /dev/null
+++ b/target/linux/ramips/dts/X5.dts
@@ -0,0 +1,133 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "X5", "ralink,rt5350-soc";
+	model = "Poray X5";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
+			ralink,gpiomux = "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "gd25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "gd25q64";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+		ralink,led_polarity = <1>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "x5:green:power";
+			gpios = <&gpio0 13 1>;
+		};
+		20 {
+			label = "x5:green:20";
+			gpios = <&gpio0 12 1>;
+		};
+		50 {
+			label = "x5:green:50";
+			gpios = <&gpio0 11 1>;
+		};
+		80 {
+			label = "x5:green:80";
+			gpios = <&gpio0 7 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		bat {
+			label = "bat";
+			gpios = <&gpio0 9 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+		mode {
+			label = "mode";
+			gpios = <&gpio0 14 1>;
+			linux,code = <0x100>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+		usb-mode {
+			gpio-export,name = "usb-mode";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 18 0>;
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+		ralink,mtd-eeprom = <&factory 0>;
+		ralink,led-polarity = <1>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 68343e3fdd..0a099b2d37 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -477,6 +477,8 @@ Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,U
 
 Image/Build/Profile/WR6202=$(call BuildFirmware/Default8M/$(1),$(1),wr6202,WR6202)
 
+Image/Build/Profile/X5=$(call BuildFirmware/Poray8M/$(1),$(1),x5,X5)
+
 Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j,XDXRN502J)
 
 ifeq ($(SUBTARGET),rt305x)
@@ -540,6 +542,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WNCE2001,$(1))
 	$(call Image/Build/Profile/WR512-3GN,$(1))
 	$(call Image/Build/Profile/WR6202,$(1))
+	$(call Image/Build/Profile/X5,$(1))
 	$(call Image/Build/Profile/XDXRN502J,$(1))
 endef
 endif
diff --git a/target/linux/ramips/rt305x/profiles/poray.mk b/target/linux/ramips/rt305x/profiles/poray.mk
index 10cf37f381..86b9a8b8fc 100644
--- a/target/linux/ramips/rt305x/profiles/poray.mk
+++ b/target/linux/ramips/rt305x/profiles/poray.mk
@@ -25,3 +25,13 @@ define Profile/M4/Description
 endef
 
 $(eval $(call Profile,M4))
+
+define Profile/X5
+	NAME:=Poray X5/X6
+	PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
+endef
+define Profile/X5/Description
+	Package set for Poray X5/X6 board
+endef
+
+$(eval $(call Profile,X5))