ipq806x: ArcherC2600: devictree cleanup

add blank lines and use macros for GPIOs

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

1 files changed, 44 insertions, 13 deletions

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
index 737a9fa07a..1740e3eb3a 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -121,7 +121,7 @@
 				pinctrl-0 = <&spi_pins>;
 				pinctrl-names = "default";
 
-				cs-gpios = <&qcom_pinmux 20 0>;
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 
 				flash: m25p80@0 {
 					compatible = "s25fl256s1";
@@ -135,119 +135,143 @@
 						reg = <0x0 0x20000>;
 						read-only;
 					};
+
 					MIBIB@20000 {
 						label = "MIBIB";
 						reg = <0x20000 0x20000>;
 						read-only;
 					};
+
 					SBL2@40000 {
 						label = "SBL2";
 						reg = <0x40000 0x20000>;
 						read-only;
 					};
+
 					SBL3@60000 {
 						label = "SBL3";
 						reg = <0x60000 0x30000>;
 						read-only;
 					};
+
 					DDRCONFIG@90000 {
 						label = "DDRCONFIG";
 						reg = <0x90000 0x10000>;
 						read-only;
 					};
+
 					SSD@a0000 {
 						label = "SSD";
 						reg = <0xa0000 0x10000>;
 						read-only;
 					};
+
 					TZ@b0000 {
 						label = "TZ";
 						reg = <0xb0000 0x30000>;
 						read-only;
 					};
+
 					RPM@e0000 {
 						label = "RPM";
 						reg = <0xe0000 0x20000>;
 						read-only;
 					};
+
 					fs-uboot@100000 {
 						label = "fs-uboot";
 						reg = <0x100000 0x70000>;
 						read-only;
 					};
+
 					uboot-env@170000 {
 						label = "uboot-env";
 						reg = <0x170000 0x40000>;
 						read-only;
 					};
+
 					radio@1b0000 {
 						label = "radio";
 						reg = <0x1b0000 0x40000>;
 						read-only;
 					};
+
 					os-image@1f0000 {
 						label = "os-image";
 						reg = <0x1f0000 0x200000>;
 					};
+
 					rootfs@3f0000 {
 						label = "rootfs";
 						reg = <0x3f0000 0x1b00000>;
 					};
+
 					defaultmac: default-mac@1ef0000 {
 						label = "default-mac";
 						reg = <0x1ef0000 0x00200>;
 						read-only;
 					};
+
 					pin@1ef0200 {
 						label = "pin";
 						reg = <0x1ef0200 0x00200>;
 						read-only;
 					};
+
 					product-info@1ef0400 {
 						label = "product-info";
 						reg = <0x1ef0400 0x0fc00>;
 						read-only;
 					};
+
 					partition-table@1f00000 {
 						label = "partition-table";
 						reg = <0x1f00000 0x10000>;
 						read-only;
 					};
+
 					soft-version@1f10000 {
 						label = "soft-version";
 						reg = <0x1f10000 0x10000>;
 						read-only;
 					};
+
 					support-list@1f20000 {
 						label = "support-list";
 						reg = <0x1f20000 0x10000>;
 						read-only;
 					};
+
 					profile@1f30000 {
 						label = "profile";
 						reg = <0x1f30000 0x10000>;
 						read-only;
 					};
+
 					default-config@1f40000 {
 						label = "default-config";
 						reg = <0x1f40000 0x10000>;
 						read-only;
 					};
+
 					user-config@1f50000 {
 						label = "user-config";
 						reg = <0x1f50000 0x40000>;
 						read-only;
 					};
+
 					qos-db@1f90000 {
 						label = "qos-db";
 						reg = <0x1f90000 0x40000>;
 						read-only;
 					};
+
 					usb-config@1fd0000 {
 						label = "usb-config";
 						reg = <0x1fd0000 0x10000>;
 						read-only;
 					};
+
 					log@1fe0000 {
 						label = "log";
 						reg = <0x1fe0000 0x20000>;
@@ -295,7 +319,7 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 
@@ -355,24 +379,25 @@
 
 		wifi {
 			label = "wifi";
-			gpios = <&qcom_pinmux 49 1>;
+			gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WLAN>;
 		};
 
 		reset {
 			label = "reset";
-			gpios = <&qcom_pinmux 64 1>;
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 
 		wps {
 			label = "wps";
-			gpios = <&qcom_pinmux 65 1>;
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
+
                 ledgeneral {
 			label = "ledgeneral";
-			gpios = <&qcom_pinmux 16 1>;
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOLLAR>;
 		};
 	};
@@ -382,31 +407,37 @@
 
 		lan {
 			label = "c2600:white:lan";
-			gpios = <&qcom_pinmux 6 0>;
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
 		};
+
 		usb4 {
 			label = "c2600:white:usb_4";
-			gpios = <&qcom_pinmux 7 0>;
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 		};
+
 		usb2 {
 			label = "c2600:white:usb_2";
-			gpios = <&qcom_pinmux 8 0>;
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 		};
+
 		wps {
 			label = "c2600:white:wps";
-			gpios = <&qcom_pinmux 9 0>;
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 		};
+
 		wan_blue {
 			label = "c2600:white:wan";
-			gpios = <&qcom_pinmux 33 1>;
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
 		};
+
 		power: status {
 			label = "c2600:white:status";
-			gpios = <&qcom_pinmux 53 0>;
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 		};
+
 		ledgnr: ledgnr {
 			label = "c2600:white:ledgnr";
-			gpios = <&qcom_pinmux 66 0>;
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };