ramips: Add Support for the Linksys RE6500

This patch adds support for the Linksys RE6500 Range Extender

http://wiki.openwrt.org/toh/linksys/re6500

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

Backport of r46043

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46053 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 148 insertions, 1 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a5a8400775..545bd7090a 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -212,6 +212,10 @@ case $board in
 	wnce2001)
 		set_wifi_led "netgear:green:wlan"
 		;;
+	re6500)
+		ucidef_set_led_default "power" "power" "linksys:white:power" "1"
+		ucidef_set_led_default "wifi" "wifi" "linksys:orange:wifi" "1"
+		;;
 	rt-n14u)
 		ucidef_set_led_default "power" "power" "asus:blue:power" "1"
 		ucidef_set_led_netdev "lan" "lan" "asus:blue:lan" eth0.1
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4849238390..bc1fc0191c 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -104,6 +104,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "0 9t"
 		;;
 
+        re6500 | \
 	asl26555)
 		ucidef_set_interface_lan "eth0.1"
 		ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 8bcc532d98..e695778a6a 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -132,6 +132,9 @@ get_status_led() {
 	px4885)
 		status_led="7links:orange:wifi"
 		;;
+	re6500)
+		status_led="linksys:orange:wifi"
+		;;
 	rt-n15)
 		status_led="rt-n15:blue:power"
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 2d007163f3..d2a1856cd8 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -208,6 +208,9 @@ ramips_board_detect() {
 	*"Linksys E1700")
 		name="e1700"
 		;;
+	*"Linksys RE6500")
+		name="re6500"
+		;;
 	*"Planex MZK-750DHP")
 		name="mzk-750dhp"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index f3e8ed5e69..cedd62bccd 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -80,6 +80,7 @@ platform_check_image() {
 	olinuxino-rt5350f-evb | \
 	psr-680w | \
 	px4885 | \
+	re6500 | \
 	rp-n53 | \
 	rt-g32-b1 | \
 	rt-n10-plus | \
diff --git a/target/linux/ramips/dts/RE6500.dts b/target/linux/ramips/dts/RE6500.dts
new file mode 100644
index 0000000000..0c3399458a
--- /dev/null
+++ b/target/linux/ramips/dts/RE6500.dts
@@ -0,0 +1,115 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "Linksys RE6500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	palmbus@1E000000 {
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l6405d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "en25q64";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uart2", "uart3", "rgmii2";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	pcie@1e140000 {
+		status = "okay";
+
+		pcie0 {
+			mt76@0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+
+		pcie1 {
+			mt76@1,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x0000>;
+				mediatek,5ghz = <0>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		wifi {
+			label = "linksys:orange:wifi";
+			gpios = <&gpio0 0 1>;
+		};
+		power {
+			label = "linksys:white:power";
+			gpios = <&gpio0 9 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		wps {
+			label = "wps";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio0 11 0>;
+			linux,code = <0x198>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 0c455c23f4..776920ba6b 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -921,7 +921,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500
 endif
 
 define Device/mt7621
@@ -933,6 +933,10 @@ define Device/wsr-600
   DTS := WSR-600
 endef
 
+define Device/re6500
+  DTS := RE6500
+endef
+
 define Device/wsr-1166
   DTS := WSR-1166
   IMAGE/sysupgrade.bin := trx | pad-rootfs
diff --git a/target/linux/ramips/mt7621/profiles/linksys.mk b/target/linux/ramips/mt7621/profiles/linksys.mk
new file mode 100644
index 0000000000..7d48008050
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/linksys.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/RE6500
+	NAME:=Linksys RE6500
+	PACKAGES:= kmod-mt76
+endef
+
+define Profile/RE6500/Description
+	Package set compatible with the Linksys RE6500 board.
+endef
+$(eval $(call Profile,RE6500))