iw: update to 0.9.22

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25440 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 69 insertions, 494 deletions

diff --git a/package/iw/Makefile b/package/iw/Makefile
index d1d60c1c6d..625e17921b 100644
--- a/package/iw/Makefile
+++ b/package/iw/Makefile
@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=iw
-PKG_VERSION:=0.9.21
+PKG_VERSION:=0.9.22
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=http://wireless.kernel.org/download/iw/
-PKG_MD5SUM:=726db5f1fd6bc316434414770513ef81
+PKG_MD5SUM:=561c2602c5ce7c65a590118286c0892a
 PKG_BUILD_DEPENDS:=mac80211
 
 include $(INCLUDE_DIR)/package.mk
diff --git a/package/iw/patches/001-nl80211_sync.patch b/package/iw/patches/001-nl80211_sync.patch
index 3f01fbf0d4..a385897b75 100644
--- a/package/iw/patches/001-nl80211_sync.patch
+++ b/package/iw/patches/001-nl80211_sync.patch
@@ -1,221 +1,81 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -295,7 +295,9 @@
-  *	auth and assoc steps. For this, you need to specify the SSID in a
-  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
-  *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
-- *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
-+ *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
-+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
-+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
-  *	It is also sent as an event, with the BSSID and response IEs when the
-  *	connection is established or failed to be established. This can be
-  *	determined by the STATUS_CODE attribute.
-@@ -313,8 +315,8 @@
-  *	channel for the specified amount of time. This can be used to do
-  *	off-channel operations like transmit a Public Action frame and wait for
-  *	a response while being associated to an AP on another channel.
-- *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
-- *	radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
-+ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
-+ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
-  *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
-  *	optionally used to specify additional channel parameters.
-  *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
-@@ -385,6 +387,8 @@
-  *	of any other interfaces, and other interfaces will again take
-  *	precedence when they are used.
+@@ -148,6 +148,10 @@
+  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
+  * 	destination %NL80211_ATTR_MAC on the interface identified by
+  * 	%NL80211_ATTR_IFINDEX.
++ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
++ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
++ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
++ *	%NL80211_ATTR_MAC.
+  * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+  *	the interface identified by %NL80211_ATTR_IFINDEX.
+  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+@@ -612,7 +616,7 @@ enum nl80211_commands {
+  *	consisting of a nested array.
   *
-+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
-+ *
-  * @NL80211_CMD_MAX: highest used command number
-  * @__NL80211_CMD_AFTER_LAST: internal use
-  */
-@@ -487,6 +491,7 @@ enum nl80211_commands {
- 	NL80211_CMD_NOTIFY_CQM,
- 
- 	NL80211_CMD_SET_CHANNEL,
-+	NL80211_CMD_SET_WDS_PEER,
- 
- 	/* add new commands above here */
- 
-@@ -686,6 +691,15 @@ enum nl80211_commands {
-  *	request, the driver will assume that the port is unauthorized until
-  *	authorized by user space. Otherwise, port is marked authorized by
-  *	default in station mode.
-+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
-+ *	ethertype that will be used for key negotiation. It can be
-+ *	specified with the associate and connect commands. If it is not
-+ *	specified, the value defaults to 0x888E (PAE, 802.1X). This
-+ *	attribute is also used as a flag in the wiphy information to
-+ *	indicate that protocols other than PAE are supported.
-+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
-+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
-+ *	ethertype frames used for key negotiation must not be encrypted.
+  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+- * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
++ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+  * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+@@ -879,7 +883,9 @@ enum nl80211_commands {
+  *	See &enum nl80211_key_default_types.
   *
-  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
-  *	We recommend using nested, driver-specific attributes within this.
-@@ -787,6 +801,33 @@ enum nl80211_commands {
-  *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
-  *      for non-automatic settings.
+  * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
+- * changed once the mesh is active.
++ *	changed once the mesh is active.
++ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
++ *	containing attributes from &enum nl80211_meshconf_params.
   *
-+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
-+ *	means support for per-station GTKs.
-+ *
-+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
-+ *	This can be used to mask out antennas which are not attached or should
-+ *	not be used for transmitting. If an antenna is not selected in this
-+ *	bitmap the hardware is not allowed to transmit on this antenna.
-+ *
-+ *	Each bit represents one antenna, starting with antenna 1 at the first
-+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n
-+ *	drivers can derive which chainmasks to use (if all antennas belonging to
-+ *	a particular chain are disabled this chain should be disabled) and if
-+ *	a chain has diversity antennas wether diversity should be used or not.
-+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
-+ *	derived from the available chains after applying the antenna mask.
-+ *	Non-802.11n drivers can derive wether to use diversity or not.
-+ *	Drivers may reject configurations or RX/TX mask combinations they cannot
-+ *	support by returning -EINVAL.
-+ *
-+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
-+ *	This can be used to mask out antennas which are not attached or should
-+ *	not be used for receiving. If an antenna is not selected in this bitmap
-+ *	the hardware should not be configured to receive on this antenna.
-+ *	For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
-+ *
-+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
-+ *
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-  */
-@@ -951,6 +992,16 @@ enum nl80211_attrs {
- 	NL80211_ATTR_RX_FRAME_TYPES,
- 	NL80211_ATTR_FRAME_TYPE,
- 
-+	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
-+	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
-+
-+	NL80211_ATTR_SUPPORT_IBSS_RSN,
-+
-+	NL80211_ATTR_WIPHY_ANTENNA_TX,
-+	NL80211_ATTR_WIPHY_ANTENNA_RX,
-+
-+	NL80211_ATTR_MCAST_RATE,
-+
- 	/* add attributes here, update the policy in nl80211.c */
- 
- 	__NL80211_ATTR_AFTER_LAST,
-@@ -1006,6 +1057,8 @@ enum nl80211_attrs {
-  * @NL80211_IFTYPE_WDS: wireless distribution interface
-  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
-  * @NL80211_IFTYPE_MESH_POINT: mesh point
-+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
-+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
-  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
-  * @NUM_NL80211_IFTYPES: number of defined interface types
-  *
-@@ -1022,6 +1075,8 @@ enum nl80211_iftype {
- 	NL80211_IFTYPE_WDS,
- 	NL80211_IFTYPE_MONITOR,
- 	NL80211_IFTYPE_MESH_POINT,
-+	NL80211_IFTYPE_P2P_CLIENT,
-+	NL80211_IFTYPE_P2P_GO,
- 
- 	/* keep last */
- 	NUM_NL80211_IFTYPES,
-@@ -1111,6 +1166,8 @@ enum nl80211_rate_info {
-  * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
-  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
-  *	station)
-+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
-+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+@@ -1225,8 +1231,6 @@ enum nl80211_rate_info {
+  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+- * @__NL80211_STA_INFO_AFTER_LAST: internal
+- * @NL80211_STA_INFO_MAX: highest possible station info attribute
+  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+  * 	containing info as possible, see &enum nl80211_sta_info_txrate.
+@@ -1236,6 +1240,13 @@ enum nl80211_rate_info {
+  * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+  * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
++ * @NL80211_STA_INFO_LLID: the station's mesh LLID
++ * @NL80211_STA_INFO_PLID: the station's mesh PLID
++ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
++ * @NL80211_STA_INFO_RX_BITRATE: last unicast rx rate, nested attribute
++ * 	containing info as possible, see &enum nl80211_sta_info_txrate.
++ * @__NL80211_STA_INFO_AFTER_LAST: internal
++ * @NL80211_STA_INFO_MAX: highest possible station info attribute
   */
  enum nl80211_sta_info {
  	__NL80211_STA_INFO_INVALID,
-@@ -1124,6 +1181,8 @@ enum nl80211_sta_info {
- 	NL80211_STA_INFO_TX_BITRATE,
- 	NL80211_STA_INFO_RX_PACKETS,
- 	NL80211_STA_INFO_TX_PACKETS,
-+	NL80211_STA_INFO_TX_RETRIES,
-+	NL80211_STA_INFO_TX_FAILED,
+@@ -1252,6 +1263,7 @@ enum nl80211_sta_info {
+ 	NL80211_STA_INFO_TX_RETRIES,
+ 	NL80211_STA_INFO_TX_FAILED,
+ 	NL80211_STA_INFO_SIGNAL_AVG,
++	NL80211_STA_INFO_RX_BITRATE,
  
  	/* keep last */
  	__NL80211_STA_INFO_AFTER_LAST,
-@@ -1277,7 +1336,11 @@ enum nl80211_bitrate_attr {
-  * 	wireless core it thinks its knows the regulatory domain we should be in.
-  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
-  * 	802.11 country information element with regulatory information it
-- * 	thinks we should consider.
-+ * 	thinks we should consider. cfg80211 only processes the country
-+ *	code from the IE, and relies on the regulatory domain information
-+ *	structure pased by userspace (CRDA) from our wireless-regdb.
-+ *	If a channel is enabled but the country code indicates it should
-+ *	be disabled we disable the channel and re-enable it upon disassociation.
-  */
- enum nl80211_reg_initiator {
- 	NL80211_REGDOM_SET_BY_CORE,
-@@ -1382,6 +1445,17 @@ enum nl80211_reg_rule_flags {
-  * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
-  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
-  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
-+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
-+ *	spent on this channel
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
-+ *	channel was sensed busy (either due to activity or energy detect)
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
-+ *	channel was sensed busy
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
-+ *	receiving data
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
-+ *	transmitting data
-  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
-  *	currently defined
-  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -1390,6 +1464,12 @@ enum nl80211_survey_info {
- 	__NL80211_SURVEY_INFO_INVALID,
- 	NL80211_SURVEY_INFO_FREQUENCY,
- 	NL80211_SURVEY_INFO_NOISE,
-+	NL80211_SURVEY_INFO_IN_USE,
-+	NL80211_SURVEY_INFO_CHANNEL_TIME,
-+	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
-+	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
-+	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
-+	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
- 
- 	/* keep last */
- 	__NL80211_SURVEY_INFO_AFTER_LAST,
-@@ -1636,11 +1716,14 @@ enum nl80211_auth_type {
-  * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
-  * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
-  * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
-+ * @NUM_NL80211_KEYTYPES: number of defined key types
-  */
- enum nl80211_key_type {
- 	NL80211_KEYTYPE_GROUP,
- 	NL80211_KEYTYPE_PAIRWISE,
- 	NL80211_KEYTYPE_PEERKEY,
-+
-+	NUM_NL80211_KEYTYPES
- };
- 
- /**
-@@ -1671,6 +1754,9 @@ enum nl80211_wpa_versions {
-  *	CCMP keys, each six bytes in little endian
-  * @NL80211_KEY_DEFAULT: flag indicating default key
-  * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
-+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
-+ *	specified the default depends on whether a MAC address was
-+ *	given with the command using the key or not (u32)
-  * @__NL80211_KEY_AFTER_LAST: internal
-  * @NL80211_KEY_MAX: highest key attribute
+@@ -1626,7 +1638,7 @@ enum nl80211_mntr_flags {
+  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+  * that it takes for an HWMP information element to propagate across the mesh
+  *
+- * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
++ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+  *
+  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+  * source mesh point for path selection elements.
+@@ -1678,6 +1690,7 @@ enum nl80211_meshconf_params {
+  * element that vendors will use to identify the path selection methods and
+  * metrics in use.
+  *
++ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
   */
-@@ -1682,6 +1768,7 @@ enum nl80211_key_attributes {
- 	NL80211_KEY_SEQ,
- 	NL80211_KEY_DEFAULT,
- 	NL80211_KEY_DEFAULT_MGMT,
-+	NL80211_KEY_TYPE,
- 
- 	/* keep last */
- 	__NL80211_KEY_AFTER_LAST,
+ enum nl80211_mesh_setup_params {
diff --git a/package/iw/patches/100-survey_freq_in_use.patch b/package/iw/patches/100-survey_freq_in_use.patch
deleted file mode 100644
index 3933ae379f..0000000000
--- a/package/iw/patches/100-survey_freq_in_use.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/survey.c
-+++ b/survey.c
-@@ -44,8 +44,9 @@ static int print_survey_handler(struct n
- 	}
- 
- 	if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
--		printf("\tfrequency:\t%u MHz\n",
--			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
-+		printf("\tfrequency:\t%u MHz%s\n",
-+			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
-+			sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
- 	if (sinfo[NL80211_SURVEY_INFO_NOISE])
- 		printf("\tnoise:\t\t%d dBm\n",
- 			(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
diff --git a/package/iw/patches/110-survey_phy_stats.patch b/package/iw/patches/110-survey_phy_stats.patch
deleted file mode 100644
index f7c8a52c91..0000000000
--- a/package/iw/patches/110-survey_phy_stats.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/survey.c
-+++ b/survey.c
-@@ -44,12 +44,27 @@ static int print_survey_handler(struct n
- 	}
- 
- 	if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
--		printf("\tfrequency:\t%u MHz%s\n",
-+		printf("\tfrequency:\t\t\t%u MHz%s\n",
- 			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
- 			sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
- 	if (sinfo[NL80211_SURVEY_INFO_NOISE])
--		printf("\tnoise:\t\t%d dBm\n",
-+		printf("\tnoise:\t\t\t\t%d dBm\n",
- 			(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
-+	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])
-+		printf("\tchannel active time:\t\t%llu ms\n",
-+			(uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]));
-+	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])
-+		printf("\tchannel busy time:\t\t%llu ms\n",
-+			(uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]));
-+	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])
-+		printf("\textension channel busy time:\t%llu ms\n",
-+			(uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]));
-+	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
-+		printf("\tchannel receive time:\t\t%llu ms\n",
-+			(uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
-+	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
-+		printf("\tchannel transmit time:\t\t%llu ms\n",
-+			(uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));
- 	return NL_SKIP;
- }
- 
diff --git a/package/iw/patches/120-ibss_mcast_rate.patch b/package/iw/patches/120-ibss_mcast_rate.patch
deleted file mode 100644
index acbd3e89a8..0000000000
--- a/package/iw/patches/120-ibss_mcast_rate.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/ibss.c
-+++ b/ibss.c
-@@ -83,6 +83,20 @@ static int join_ibss(struct nl80211_stat
- 		argc--;
- 	}
- 
-+	/* multicast rate */
-+	if (argc > 1 && strcmp(argv[0], "mcast-rate") == 0) {
-+		argv++;
-+		argc--;
-+
-+		rate = strtod(argv[0], &end);
-+		if (*end != '\0')
-+			return 1;
-+
-+		NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, (int) rate * 10);
-+		argv++;
-+		argc--;
-+	}
-+
- 	if (!argc)
- 		return 0;
- 
-@@ -109,7 +123,7 @@ COMMAND(ibss, leave, NULL,
- 	"Leave the current IBSS cell.");
- COMMAND(ibss, join,
- 	"<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] "
--	"[basic-rates <rate in Mbps,rate2,...>] [key d:0:abcde]",
-+	"[basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]",
- 	NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
- 	"Join the IBSS cell with the given SSID, if it doesn't exist create\n"
- 	"it on the given frequency. When fixed frequency is requested, don't\n"
diff --git a/package/iw/patches/302-sta-retries.patch b/package/iw/patches/302-sta-retries.patch
deleted file mode 100644
index 8c1ce13efc..0000000000
--- a/package/iw/patches/302-sta-retries.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-iw: print station retry counters
-
-From: Bruno Randolf <br1@einfach.org>
-
-Signed-off-by: Bruno Randolf <br1@einfach.org>
----
- station.c |    8 ++++++++
- 1 files changed, 8 insertions(+), 0 deletions(-)
-
---- a/station.c
-+++ b/station.c
-@@ -48,6 +48,8 @@ static int print_sta_handler(struct nl_m
- 		[NL80211_STA_INFO_LLID] = { .type = NLA_U16 },
- 		[NL80211_STA_INFO_PLID] = { .type = NLA_U16 },
- 		[NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 },
-+		[NL80211_STA_INFO_TX_RETRIES] = { .type = NLA_U32 },
-+		[NL80211_STA_INFO_TX_FAILED] = { .type = NLA_U32 },
- 	};
- 
- 	static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
-@@ -96,6 +98,12 @@ static int print_sta_handler(struct nl_m
- 	if (sinfo[NL80211_STA_INFO_TX_PACKETS])
- 		printf("\n\ttx packets:\t%u",
- 			nla_get_u32(sinfo[NL80211_STA_INFO_TX_PACKETS]));
-+	if (sinfo[NL80211_STA_INFO_TX_RETRIES])
-+		printf("\n\ttx retries:\t%u",
-+			nla_get_u32(sinfo[NL80211_STA_INFO_TX_RETRIES]));
-+	if (sinfo[NL80211_STA_INFO_TX_FAILED])
-+		printf("\n\ttx failed:\t%u",
-+			nla_get_u32(sinfo[NL80211_STA_INFO_TX_FAILED]));
- 	if (sinfo[NL80211_STA_INFO_SIGNAL])
- 		printf("\n\tsignal:  \t%d dBm",
- 			(int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]));
diff --git a/package/iw/patches/401-antenna.patch b/package/iw/patches/401-antenna.patch
deleted file mode 100644
index 62f37c2e2d..0000000000
--- a/package/iw/patches/401-antenna.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-iw: Add antenna configuration commands
-
-From: Bruno Randolf <br1@einfach.org>
-
-Add command to set the antenna configuration (iw phyX set antenna ...) and
-include antenna setting in wiphy information (iw phyX info).
-
-iw phyX set antenna all | <bitmap> | <tx bitmap> <rx bitmap>
-
-Signed-off-by: Bruno Randolf <br1@einfach.org>
-
-v8:  Simplfied option parser as requested.
----
- info.c |    7 +++++++
- phy.c  |   39 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 46 insertions(+), 0 deletions(-)
-
---- a/info.c
-+++ b/info.c
-@@ -168,6 +168,13 @@ static int print_phy_handler(struct nl_m
- 		printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
- 	}
- 
-+	if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
-+	    tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
-+		printf("\tAntenna: TX %#x RX %#x\n",
-+		       nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX]),
-+		       nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX]));
-+	}
-+
- 	if (tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES]) {
- 		printf("\tSupported interface modes:\n");
- 		nla_for_each_nested(nl_mode, tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES], rem_mode)
---- a/phy.c
-+++ b/phy.c
-@@ -307,3 +307,51 @@ COMMAND(set, txpower, "<auto|fixed|limit
- COMMAND(set, txpower, "<auto|fixed|limit> [<tx power in mBm>]",
- 	NL80211_CMD_SET_WIPHY, 0, CIB_NETDEV, handle_txpower,
- 	"Specify transmit power level and setting type.");
-+
-+static int handle_antenna(struct nl80211_state *state,
-+			  struct nl_cb *cb,
-+			  struct nl_msg *msg,
-+			  int argc, char **argv)
-+{
-+	char *end;
-+	uint32_t tx_ant = 0, rx_ant = 0;
-+
-+	if (argc == 1) {
-+		if (strcmp(argv[0], "all") == 0)
-+			tx_ant = rx_ant = 0xffffffff;
-+		else {
-+			tx_ant = rx_ant = strtoul(argv[0], &end, 0);
-+			if (*end)
-+				return 1;
-+		}
-+	}
-+	else if (argc == 2) {
-+		if (strcmp(argv[0], "all") == 0)
-+			tx_ant = 0xffffffff;
-+		else {
-+			tx_ant = strtoul(argv[0], &end, 0);
-+			if (*end)
-+				return 1;
-+		}
-+		if (strcmp(argv[1], "all") == 0)
-+			rx_ant = 0xffffffff;
-+		else {
-+			rx_ant = strtoul(argv[1], &end, 0);
-+			if (*end)
-+				return 1;
-+		}
-+	} else
-+		return 1;
-+
-+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_TX, tx_ant);
-+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_RX, rx_ant);
-+
-+	return 0;
-+
-+ nla_put_failure:
-+	return -ENOBUFS;
-+}
-+COMMAND(set, antenna, "<bitmap> | all | <tx bitmap> <rx bitmap>",
-+	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
-+	"Set a bitmap of allowed antennas to use for TX and RX.\n"
-+	"The driver may reject antenna configurations it cannot support.");
diff --git a/package/iw/patches/500-sta-signal-avg.patch b/package/iw/patches/500-sta-signal-avg.patch
deleted file mode 100644
index 1cdbdbc149..0000000000
--- a/package/iw/patches/500-sta-signal-avg.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-iw: add signal average to station information
-
-From: Bruno Randolf <br1@einfach.org>
-
-
----
- nl80211.h |    1 +
- station.c |    3 +++
- 2 files changed, 4 insertions(+), 0 deletions(-)
-
---- a/nl80211.h
-+++ b/nl80211.h
-@@ -1183,6 +1183,7 @@ enum nl80211_sta_info {
- 	NL80211_STA_INFO_TX_PACKETS,
- 	NL80211_STA_INFO_TX_RETRIES,
- 	NL80211_STA_INFO_TX_FAILED,
-+	NL80211_STA_INFO_SIGNAL_AVG,
- 
- 	/* keep last */
- 	__NL80211_STA_INFO_AFTER_LAST,
---- a/station.c
-+++ b/station.c
-@@ -107,6 +107,9 @@ static int print_sta_handler(struct nl_m
- 	if (sinfo[NL80211_STA_INFO_SIGNAL])
- 		printf("\n\tsignal:  \t%d dBm",
- 			(int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]));
-+	if (sinfo[NL80211_STA_INFO_SIGNAL_AVG])
-+		printf("\n\tsignal avg:\t%d dBm",
-+			(int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL_AVG]));
- 
- 	if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
- 		if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
diff --git a/package/iw/patches/501-ibss-bintval.patch b/package/iw/patches/501-ibss-bintval.patch
deleted file mode 100644
index 791e2a0716..0000000000
--- a/package/iw/patches/501-ibss-bintval.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-iw: Add ibss join parameter for beacon interval
-
-From: Bruno Randolf <br1@einfach.org>
-
-NL80211_ATTR_BEACON_INTERVAL already exists, we just have to use it.
-
-Signed-off-by: Bruno Randolf <br1@einfach.org>
----
- ibss.c |   19 ++++++++++++++++---
- 1 files changed, 16 insertions(+), 3 deletions(-)
-
---- a/ibss.c
-+++ b/ibss.c
-@@ -26,6 +26,7 @@ static int join_ibss(struct nl80211_stat
- 	int n_rates = 0;
- 	char *value = NULL, *sptr = NULL;
- 	float rate;
-+	int bintval;
- 
- 	if (argc < 2)
- 		return 1;
-@@ -57,6 +58,17 @@ static int join_ibss(struct nl80211_stat
- 		}
- 	}
- 
-+	if (argc > 1 && strcmp(argv[0], "beacon-interval") == 0) {
-+		argv++;
-+		argc--;
-+		bintval = strtoul(argv[0], &end, 10);
-+		if (*end != '\0')
-+			return 1;
-+		NLA_PUT_U32(msg, NL80211_ATTR_BEACON_INTERVAL, bintval);
-+		argv++;
-+		argc--;
-+	}
-+
- 	/* basic rates */
- 	if (argc > 1 && strcmp(argv[0], "basic-rates") == 0) {
- 		argv++;
-@@ -122,11 +134,12 @@ COMMAND(ibss, leave, NULL,
- 	NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
- 	"Leave the current IBSS cell.");
- COMMAND(ibss, join,
--	"<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] "
--	"[basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]",
-+	"<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] [beacon-interval "
-+	"<TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]",
- 	NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
- 	"Join the IBSS cell with the given SSID, if it doesn't exist create\n"
- 	"it on the given frequency. When fixed frequency is requested, don't\n"
- 	"join/create a cell on a different frequency. When a fixed BSSID is\n"
- 	"requested use that BSSID and do not adopt another cell's BSSID even\n"
--	"if it has higher TSF and the same SSID.");
-+	"if it has higher TSF and the same SSID. If an IBSS is created, create\n"
-+	"it with the specified basic-rates and beacon-interval (in TU).");