[adm5120] switch to 2.6.24

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10427 3c298f89-4303-0410-b956-a3cf2f4a3e73
author: Gabor Juhos <juhosg@openwrt.org> 2008-02-09 10:29:28 +0000
committer: Gabor Juhos <juhosg@openwrt.org> 2008-02-09 10:29:28 +0000
commit: 1fd898c4d2c67f89b150c212fcd439728ca97508 (patch)
tree: 4f218ef0f6446459af163261d140df7165ab2ba8
parent: b734512859db60d7344c6546e2a3eff2b1dbbdd0 (diff)
download: upstream-1fd898c4d2c67f89b150c212fcd439728ca97508.tar.gz
upstream-1fd898c4d2c67f89b150c212fcd439728ca97508.tar.bz2
upstream-1fd898c4d2c67f89b150c212fcd439728ca97508.zip
65 files changed, 101 insertions, 3215 deletions
diff --git a/target/linux/adm5120/Makefile b/target/linux/adm5120/Makefile
index 6a78f724db..c7c66705a3 100644
--- a/target/linux/adm5120/Makefile
+++ b/target/linux/adm5120/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 BOARD:=adm5120
 BOARDNAME:=Infineon ADM5120
-LINUX_VERSION:=2.6.23.14
+LINUX_VERSION:=2.6.24
 SUBTARGETS:=router_le router_be
 INITRAMFS_EXTRA_FILES:=
 
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/reset.c b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
index b086f9a5bd..653d42c849 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/reset.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
@@ -27,7 +27,6 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 
 #include <adm5120_info.h>
@@ -50,7 +49,6 @@ void adm5120_halt(void)
 {
 	local_irq_disable();
 
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 	while (1) {
 		if (cpu_wait)
 			cpu_wait();
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/setup.c b/target/linux/adm5120/files/arch/mips/adm5120/setup.c
index 9046057f9f..418a342e81 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/setup.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/setup.c
@@ -23,7 +23,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/version.h>
 
 #include <asm/reboot.h>
 #include <asm/time.h>
@@ -60,11 +59,6 @@ void __init plat_mem_setup(void)
 	adm5120_mem_init();
 	adm5120_report();
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-extern void plat_time_init(void) __init;
-	board_time_init = plat_time_init;
-#endif
-
 	_machine_restart = adm5120_restart;
 	_machine_halt = adm5120_halt;
 	pm_power_off = adm5120_halt;
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/time.c b/target/linux/adm5120/files/arch/mips/adm5120/time.c
index 66eb1ce7df..63191d4938 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/time.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/time.c
@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
-#include <linux/version.h>
 
 #include <asm/irq.h>
 #include <asm/cpu.h>
@@ -34,13 +33,3 @@ void __init plat_time_init(void)
 {
 	mips_hpt_frequency = adm5120_speed / 2;
 }
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	clear_c0_status(ST0_BEV);
-
-	/* Install ISR for CPU Counter interrupt */
-	setup_irq(ADM5120_IRQ_COUNTER, irq);
-}
-#endif
diff --git a/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c b/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c
deleted file mode 100644
index cddb1721cf..0000000000
--- a/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *	ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver
- *	Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007
- *
- *	based on
- *
- *	RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-
-#include <asm/bootinfo.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
-
-
-#define DEFAULT_TIMEOUT	15		/* (secs) Default is 15 seconds */
-#define MAX_TIMEOUT	327
-/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */
-
-#define NAME "adm5120_wdt"
-#define VERSION "0.1"
-
-static int expect_close = 0;
-static int access = 0;
-static unsigned int timeout = DEFAULT_TIMEOUT;
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_LICENSE("GPL");
-
-
-static inline void wdt_set_timeout(void)
-{
-	u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16);
-	SW_WRITE_REG(SWITCH_REG_WDOG0, val);
-}
-
-/*
-   It looks like WDOG0-register-write don't modify counter,
-   but WDOG0-register-read resets counter.
-*/
-
-static inline void wdt_reset_counter(void)
-{
-	SW_READ_REG(SWITCH_REG_WDOG0);
-}
-
-static inline void wdt_disable(void)
-{
-	SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000);
-}
-
-
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
-	/* Allow only one person to hold it open */
-	if (access)
-		return -EBUSY;
-
-	if (nowayout) {
-		__module_get(THIS_MODULE);
-	}
-
-	/* Activate timer */
-	wdt_reset_counter();
-	wdt_set_timeout();
-	printk(KERN_INFO NAME ": enabling watchdog timer\n");
-	access = 1;
-	return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
-	/*
-	 *	Shut off the timer.
-	 * 	Lock it in if it's a module and we set nowayout
-	 */
-	if (expect_close && (nowayout == 0)) {
-		wdt_disable();
-		printk(KERN_INFO NAME ": disabling watchdog timer\n");
-		module_put(THIS_MODULE);
-	} else {
-		printk(KERN_CRIT NAME ": device closed unexpectedly.  WDT will not stop!\n");
-	}
-	access = 0;
-	return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
-	/* Refresh the timer. */
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			/* In case it was set long ago */
-			expect_close = 0;
-
-			for (i = 0; i != len; i++) {
-				char c;
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_close = 1;
-			}
-		}
-		wdt_reset_counter();
-		return len;
-	}
-	return 0;
-}
-
-static int wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
-{
-	int new_timeout;
-	static struct watchdog_info ident = {
-		.options =		WDIOF_SETTIMEOUT |
-					WDIOF_KEEPALIVEPING |
-					WDIOF_MAGICCLOSE,
-		.firmware_version =	0,
-		.identity =		"ADM5120_WDT Watchdog",
-	};
-	switch (cmd) {
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
-				return -EFAULT;
-			return 0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0,(int *)arg);
-		case WDIOC_KEEPALIVE:
-			wdt_reset_counter();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, (int *)arg))
-				return -EFAULT;
-			if (new_timeout < 1)
-				return -EINVAL;
-			if (new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
-			timeout = new_timeout;
-			wdt_set_timeout();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, (int *)arg);
-	}
-}
-
-static struct file_operations wdt_fops = {
-	owner:		THIS_MODULE,
-	llseek:		no_llseek,
-	write:		wdt_write,
-	ioctl:		wdt_ioctl,
-	open:		wdt_open,
-	release:	wdt_release,
-};
-
-static struct miscdevice wdt_miscdev = {
-	minor:		WATCHDOG_MINOR,
-	name:		"watchdog",
-	fops:		&wdt_fops,
-};
-
-static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n";
-
-static int __init watchdog_init(void)
-{
-	int ret;
-
-	ret = misc_register(&wdt_miscdev);
-
-	if (ret)
-		return ret;
-
-	wdt_disable();
-	printk(banner);
-
-	return 0;
-}
-
-static void __exit watchdog_exit(void)
-{
-	misc_deregister(&wdt_miscdev);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_exit);
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c
index ff933cf7cf..8f3610e907 100644
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.c
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.c
@@ -93,8 +93,14 @@
 /* ------------------------------------------------------------------------ */
 
 struct adm5120_if_priv {
+	struct net_device *dev;
+
 	unsigned int	vlan_no;
 	unsigned int	port_mask;
+
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+	struct napi_struct napi;
+#endif
 };
 
 struct dma_desc {
@@ -333,7 +339,6 @@ static void sw_dump_regs(void)
 	SW_DBG("rlda: %08X\n", t);
 }
 
-
 /* ------------------------------------------------------------------------ */
 
 static inline void adm5120_rx_dma_update(struct dma_desc *desc,
@@ -495,9 +500,11 @@ static void adm5120_switch_tx(void)
 }
 
 #ifdef CONFIG_ADM5120_SWITCH_NAPI
-static int adm5120_if_poll(struct net_device *dev, int *budget)
+static int adm5120_if_poll(struct napi_struct *napi, int limit)
 {
-	int limit = min(dev->quota, *budget);
+	struct adm5120_if_priv *priv = container_of(napi,
+				struct adm5120_if_priv, napi);
+	struct net_device *dev = priv->dev;
 	int done;
 	u32 status;
 
@@ -509,13 +516,10 @@ static int adm5120_if_poll(struct net_device *dev, int *budget)
 	SW_DBG("%s: processing RX ring\n", dev->name);
 	done = adm5120_switch_rx(limit);
 
-	*budget -= done;
-	dev->quota -= done;
-
 	status = sw_int_status() & SWITCH_INTS_POLL;
 	if ((done < limit) && (!status)) {
 		SW_DBG("disable polling mode for %s\n", dev->name);
-		netif_rx_complete(dev);
+		netif_rx_complete(dev, napi);
 		sw_int_unmask(SWITCH_INTS_POLL);
 		return 0;
 	}
@@ -541,10 +545,12 @@ static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
 
 	if (status & SWITCH_INTS_POLL) {
 		struct net_device *dev = dev_id;
+		struct adm5120_if_priv *priv = netdev_priv(dev);
+
 		sw_dump_intr_mask("poll ints", status);
 		SW_DBG("enable polling mode for %s\n", dev->name);
 		sw_int_mask(SWITCH_INTS_POLL);
-		netif_rx_schedule(dev);
+		netif_rx_schedule(dev, &priv->napi);
 	}
 #else
 	sw_int_ack(status);
@@ -779,12 +785,31 @@ static void adm5120_switch_set_vlan_ports(unsigned int vlan, u32 ports)
 
 /* ------------------------------------------------------------------------ */
 
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+static inline void adm5120_if_napi_enable(struct net_device *dev)
+{
+	struct adm5120_if_priv *priv = netdev_priv(dev);
+	napi_enable(&priv->napi);
+}
+
+static inline void adm5120_if_napi_disable(struct net_device *dev)
+{
+	struct adm5120_if_priv *priv = netdev_priv(dev);
+	napi_disable(&priv->napi);
+}
+#else
+static inline void adm5120_if_napi_enable(struct net_device *dev) {}
+static inline void adm5120_if_napi_disable(struct net_device *dev) {}
+#endif /* CONFIG_ADM5120_SWITCH_NAPI */
+
 static int adm5120_if_open(struct net_device *dev)
 {
 	u32 t;
 	int err;
 	int i;
 
+	adm5120_if_napi_enable(dev);
+
 	err = request_irq(dev->irq, adm5120_switch_irq,
 		(IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
 	if (err) {
@@ -809,6 +834,7 @@ static int adm5120_if_open(struct net_device *dev)
 	return 0;
 
 err:
+	adm5120_if_napi_disable(dev);
 	return err;
 }
 
@@ -818,6 +844,7 @@ static int adm5120_if_stop(struct net_device *dev)
 	int i;
 
 	netif_stop_queue(dev);
+	adm5120_if_napi_disable(dev);
 
 	/* disable port if not assigned to other devices */
 	t = sw_read_reg(SWITCH_REG_PORT_CONF0);
@@ -1001,6 +1028,9 @@ static struct net_device *adm5120_if_alloc(void)
 	if (!dev)
 		return NULL;
 
+	priv = netdev_priv(dev);
+	priv->dev = dev;
+
 	dev->irq		= ADM5120_IRQ_SWITCH;
 	dev->open		= adm5120_if_open;
 	dev->hard_start_xmit 	= adm5120_if_hard_start_xmit;
@@ -1010,13 +1040,11 @@ static struct net_device *adm5120_if_alloc(void)
 	dev->tx_timeout		= adm5120_if_tx_timeout;
 	dev->watchdog_timeo 	= TX_TIMEOUT;
 	dev->set_mac_address 	= adm5120_if_set_mac_address;
+
 #ifdef CONFIG_ADM5120_SWITCH_NAPI
-	dev->poll		= adm5120_if_poll;
-	dev->weight		= 64;
+	netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
 #endif
 
-	SET_MODULE_OWNER(dev);
-
 	return dev;
 }
 
diff --git a/target/linux/adm5120/files/drivers/serial/adm5120_uart.c b/target/linux/adm5120/files/drivers/serial/adm5120_uart.c
deleted file mode 100644
index 83c5f72012..0000000000
--- a/target/linux/adm5120/files/drivers/serial/adm5120_uart.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- *	Serial driver for ADM5120 SoC
- *
- *	Derived from drivers/serial/uart00.c
- *	Copyright 2001 Altera Corporation
- *
- *	Some pieces are derived from the ADMtek 2.4 serial driver.
- *	Copyright (C) ADMtek Incorporated, 2003
- *		daniell@admtek.com.tw
- *	Which again was derived from drivers/char/serial.c
- *	Copyright (C) Linus Torvalds et al.
- *
- *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/console.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
-
-#define ADM5120_UART_REG(base, reg) \
-	(*(volatile u32 *)KSEG1ADDR((base)+(reg)))
-
-#define ADM5120_UARTCLK_FREQ            62500000
-#define ADM5120_UART_BAUDDIV(rate)	((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1))
-
-#define ADM5120_UART_BAUD115200		ADM5120_UART_BAUDDIV(115200)
-
-#define ADM5120_UART_DATA		0x00
-#define ADM5120_UART_RS			0x04
-#define ADM5120_UART_LCR_H		0x08
-#define ADM5120_UART_LCR_M		0x0c
-#define ADM5120_UART_LCR_L		0x10
-#define ADM5120_UART_CR			0x14
-#define ADM5120_UART_FR			0x18
-#define ADM5120_UART_IR			0x1c
-
-#define ADM5120_UART_FE			0x01
-#define ADM5120_UART_PE			0x02
-#define ADM5120_UART_BE			0x04
-#define ADM5120_UART_OE			0x08
-#define ADM5120_UART_ERR		0x0f
-#define ADM5120_UART_FIFO_EN		0x10
-#define ADM5120_UART_EN			0x01
-#define ADM5120_UART_TIE		0x20
-#define ADM5120_UART_RIE		0x50
-#define ADM5120_UART_IE			0x78
-#define ADM5120_UART_CTS		0x01
-#define ADM5120_UART_DSR		0x02
-#define ADM5120_UART_DCD		0x04
-#define ADM5120_UART_TXFF		0x20
-#define ADM5120_UART_TXFE		0x80
-#define ADM5120_UART_RXFE		0x10
-#define ADM5120_UART_BRK		0x01
-#define ADM5120_UART_PEN		0x02
-#define ADM5120_UART_EPS		0x04
-#define ADM5120_UART_STP2		0x08
-#define ADM5120_UART_W5			0x00
-#define ADM5120_UART_W6			0x20
-#define ADM5120_UART_W7			0x40
-#define ADM5120_UART_W8			0x60
-#define ADM5120_UART_MIS		0x01
-#define ADM5120_UART_RIS		0x02
-#define ADM5120_UART_TIS		0x04
-#define ADM5120_UART_RTIS		0x08
-
-static void adm5120ser_stop_tx(struct uart_port *port)
-{
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
-}
-
-static void adm5120ser_irq_rx(struct uart_port *port)
-{
-	struct tty_struct *tty = port->info->tty;
-	unsigned int status, ch, rds, flg, ignored = 0;
-
-	status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
-	while (!(status & ADM5120_UART_RXFE)) {
-		/* 
-		 * We need to read rds before reading the 
-		 * character from the fifo
-		 */
-		rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
-		ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
-		port->icount.rx++;
-
-		if (tty->low_latency)
-			tty_flip_buffer_push(tty);
-
-		flg = TTY_NORMAL;
-
-		/*
-		 * Note that the error handling code is
-		 * out of the main execution path
-		 */
-		if (rds & ADM5120_UART_ERR)
-			goto handle_error;
-		if (uart_handle_sysrq_char(port, ch))
-			goto ignore_char;
-
-	error_return:
-		tty_insert_flip_char(tty, ch, flg);
-
-	ignore_char:
-		status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
-	}
- out:
-	tty_flip_buffer_push(tty);
-	return;
-
- handle_error:
- 	ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
-	if (rds & ADM5120_UART_BE) {
-		port->icount.brk++;
-		if (uart_handle_break(port))
-			goto ignore_char;
-	} else if (rds & ADM5120_UART_PE)
-		port->icount.parity++;
-	else if (rds & ADM5120_UART_FE)
-		port->icount.frame++;
-	if (rds & ADM5120_UART_OE)
-		port->icount.overrun++;
-
-	if (rds & port->ignore_status_mask) {
-		if (++ignored > 100)
-			goto out;
-		goto ignore_char;
-	}
-	rds &= port->read_status_mask;
-
-	if (rds & ADM5120_UART_BE)
-		flg = TTY_BREAK;
-	else if (rds & ADM5120_UART_PE)
-		flg = TTY_PARITY;
-	else if (rds & ADM5120_UART_FE)
-		flg = TTY_FRAME;
-
-	if (rds & ADM5120_UART_OE) {
-		/*
-		 * CHECK: does overrun affect the current character?
-		 * ASSUMPTION: it does not.
-		 */
-		tty_insert_flip_char(tty, ch, flg);
-		ch = 0;
-		flg = TTY_OVERRUN;
-	}
-#ifdef CONFIG_MAGIC_SYSRQ
-	port->sysrq = 0;
-#endif
-	goto error_return;
-}
-
-static void adm5120ser_irq_tx(struct uart_port *port)
-{
-	struct circ_buf *xmit = &port->info->xmit;
-	int count;
-
-	if (port->x_char) {
-		ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
-		    port->x_char;
-		port->icount.tx++;
-		port->x_char = 0;
-		return;
-	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		adm5120ser_stop_tx(port);
-		return;
-	}
-
-	count = port->fifosize >> 1;
-	do {
-		ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
-		    xmit->buf[xmit->tail];
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (--count > 0);
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-
-	if (uart_circ_empty(xmit))
-		adm5120ser_stop_tx(port);
-}
-
-static void adm5120ser_irq_modem(struct uart_port *port)
-{
-	unsigned int status;
-
-	status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
-
-	if (status & ADM5120_UART_DCD)
-		uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
-
-	if (status & ADM5120_UART_DSR)
-		port->icount.dsr++;
-
-	if (status & ADM5120_UART_CTS)
-		uart_handle_cts_change(port, status & ADM5120_UART_CTS);
-
-	wake_up_interruptible(&port->info->delta_msr_wait);
-}
-
-static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
-{
-	struct uart_port *port = dev_id;
-	unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
-
-	if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
-		adm5120ser_irq_rx(port);
-	if (ir & ADM5120_UART_TIS)
-		adm5120ser_irq_tx(port);
-	if (ir & ADM5120_UART_MIS) {
-		adm5120ser_irq_modem(port);
-		ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static unsigned int adm5120ser_tx_empty(struct uart_port *port)
-{
-	unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
-	return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
-}
-
-static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-}
-
-static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
-{
-	unsigned int result = 0;
-	unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
-
-	if (fr & ADM5120_UART_CTS)
-		result |= TIOCM_CTS;
-	if (fr & ADM5120_UART_DSR)
-		result |= TIOCM_DSR;
-	if (fr & ADM5120_UART_DCD)
-		result |= TIOCM_CAR;
-	return result;
-}
-
-static void adm5120ser_start_tx(struct uart_port *port)
-{
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
-}
-
-static void adm5120ser_stop_rx(struct uart_port *port)
-{
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
-}
-
-static void adm5120ser_enable_ms(struct uart_port *port)
-{
-}
-
-static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
-{
-	unsigned long flags;
-	unsigned long lcrh;
-
-	spin_lock_irqsave(&port->lock, flags);
-	lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
-	if (break_state == -1)
-		lcrh |= ADM5120_UART_BRK;
-	else
-		lcrh &= ~ADM5120_UART_BRK;
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int adm5120ser_startup(struct uart_port *port)
-{
-	int ret;
-
-	ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
-	if (ret) {
-		printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
-		return ret;
-	}
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
-	    ADM5120_UART_FIFO_EN;
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
-	    ADM5120_UART_EN | ADM5120_UART_IE;
-	return 0;
-}
-
-static void adm5120ser_shutdown(struct uart_port *port)
-{
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
-	free_irq(port->irq, port);
-}
-
-static void adm5120ser_set_termios(struct uart_port *port,
-    struct ktermios *termios, struct ktermios *old)
-{
-	unsigned int baud, quot, lcrh;
-	unsigned long flags;
-
-	termios->c_cflag |= CREAD;
-
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-
-	lcrh = ADM5120_UART_FIFO_EN;
-	switch (termios->c_cflag & CSIZE) {
-		case CS5:
-			lcrh |= ADM5120_UART_W5;
-			break;
-		case CS6:
-			lcrh |= ADM5120_UART_W6;
-			break;
-		case CS7:
-			lcrh |= ADM5120_UART_W7;
-			break;
-		default:
-			lcrh |= ADM5120_UART_W8;
-			break;
-	}
-	if (termios->c_cflag & CSTOPB)
-		lcrh |= ADM5120_UART_STP2;
-	if (termios->c_cflag & PARENB) {
-		lcrh |= ADM5120_UART_PEN;
-		if (!(termios->c_cflag & PARODD))
-			lcrh |= ADM5120_UART_EPS;
-	}
-
-	spin_lock_irqsave(port->lock, flags);
-
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	port->read_status_mask = ADM5120_UART_OE;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= ADM5120_UART_BE;
-
-	/*
-	 * Characters to ignore
-	 */
-	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
-	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= ADM5120_UART_BE;
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns to (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= ADM5120_UART_OE;
-	}
-
-	quot = ADM5120_UART_BAUD115200;
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
-	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *adm5120ser_type(struct uart_port *port)
-{
-	return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
-}
-
-static void adm5120ser_config_port(struct uart_port *port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE)
-		port->type = PORT_ADM5120;
-}
-
-static void adm5120ser_release_port(struct uart_port *port)
-{
-	release_mem_region(port->iobase, ADM5120_UART_SIZE);
-}
-
-static int adm5120ser_request_port(struct uart_port *port)
-{
-	return request_mem_region(port->iobase, ADM5120_UART_SIZE,
-	    "adm5120-uart") != NULL ? 0 : -EBUSY; 
-}
-
-static struct uart_ops adm5120ser_ops = {
-	.tx_empty =	adm5120ser_tx_empty,
-	.set_mctrl =	adm5120ser_set_mctrl,
-	.get_mctrl =	adm5120ser_get_mctrl,
-	.stop_tx =	adm5120ser_stop_tx,
-	.start_tx =	adm5120ser_start_tx,
-	.stop_rx =	adm5120ser_stop_rx,
-	.enable_ms =	adm5120ser_enable_ms,
-	.break_ctl =	adm5120ser_break_ctl,
-	.startup =	adm5120ser_startup,
-	.shutdown =	adm5120ser_shutdown,
-	.set_termios =	adm5120ser_set_termios,
-	.type =		adm5120ser_type,
-	.config_port =	adm5120ser_config_port,
-	.release_port =	adm5120ser_release_port,
-	.request_port =	adm5120ser_request_port,
-};
-
-static void adm5120console_put(const char c)
-{
-	while ((ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_FR) &
-	     ADM5120_UART_TXFF) != 0);
-	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_DATA) = c;
-}
-
-static void adm5120console_write(struct console *con, const char *s,
-    unsigned int count)
-{
-	while (count--) {
-		if (*s == '\n')
-			adm5120console_put('\r');
-		adm5120console_put(*s);
-		s++;
-	}
-}
-
-static int adm5120console_setup(struct console *con, char *options)
-{
-	/* Set to 115200 baud, 8N1 and enable FIFO */
-	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_L) =
-	    ADM5120_UART_BAUD115200 & 0xff;
-	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_M) =
-	    ADM5120_UART_BAUD115200 >> 8;
-	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_H) =
-	    ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
-	/* Enable port */
-	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_CR) =
-	    ADM5120_UART_EN;
-
-	return 0;
-}
-
-static struct uart_driver adm5120ser_reg;
-
-static struct console adm5120_serconsole = {
-	.name =		"ttyS",
-	.write =	adm5120console_write,
-	.device =	uart_console_device,
-	.setup =	adm5120console_setup,
-	.flags =	CON_PRINTBUFFER,
-	.cflag =	B115200 | CS8 | CREAD,
-	.index =	0,
-	.data =		&adm5120ser_reg,
-};
-
-static int __init adm5120console_init(void)
-{
-	register_console(&adm5120_serconsole);
-	return 0;
-}
-
-console_initcall(adm5120console_init);
-
-
-static struct uart_port adm5120ser_ports[] = {
-	{
-		.iobase =	ADM5120_UART0_BASE,
-		.irq =		ADM5120_IRQ_UART0,
-		.uartclk =	ADM5120_UARTCLK_FREQ,
-		.fifosize =	16,
-		.ops =		&adm5120ser_ops,
-		.line =		0,
-		.flags =	ASYNC_BOOT_AUTOCONF,
-	},
-#if (CONFIG_ADM5120_NR_UARTS > 1)
-	{
-		.iobase =	ADM5120_UART1_BASE,
-		.irq =		ADM5120_IRQ_UART1,
-		.uartclk =	ADM5120_UARTCLK_FREQ,
-		.fifosize =	16,
-		.ops =		&adm5120ser_ops,
-		.line =		1,
-		.flags =	ASYNC_BOOT_AUTOCONF,
-	},
-#endif
-};
-
-static struct uart_driver adm5120ser_reg = {
-	.owner	=	THIS_MODULE,
-	.driver_name =	"ttyS",
-	.dev_name =	"ttyS",
-	.major =	TTY_MAJOR,
-	.minor =	64,
-	.nr =		CONFIG_ADM5120_NR_UARTS,
-	.cons =		&adm5120_serconsole,
-};
-
-static int __init adm5120ser_init(void)
-{
-	int ret, i;
-
-	ret = uart_register_driver(&adm5120ser_reg);
-	if (!ret) {
-		for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
-			uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
-	}
-
-	return ret;
-}
-
-__initcall(adm5120ser_init);
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
index 1027e5c8cd..3eec94a381 100644
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
@@ -82,7 +82,7 @@ static inline char *td_togglestring(u32 info)
  * small: 0) header + data packets 1) just header
  */
 static void __attribute__((unused))
-urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small)
+urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status)
 {
 	unsigned int pipe = urb->pipe;
 
@@ -92,7 +92,7 @@ urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small)
 	}
 
 #ifndef	ADMHC_VERBOSE_DEBUG
-	if (urb->status != 0)
+	if (status != 0)
 #endif
 	admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d "
 			"stat=%d\n",
@@ -105,7 +105,7 @@ urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small)
 			urb->transfer_flags,
 			urb->actual_length,
 			urb->transfer_buffer_length,
-			urb->status);
+			status);
 
 #ifdef	ADMHC_VERBOSE_DEBUG
 	if (!small) {
@@ -125,7 +125,7 @@ urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small)
 						urb->transfer_buffer_length: urb->actual_length;
 			for (i = 0; i < 16 && i < len; i++)
 				printk(" %02x", ((__u8 *)urb->transfer_buffer)[i]);
-			printk("%s stat:%d\n", i < len? "...": "", urb->status);
+			printk("%s stat:%d\n", i < len? "...": "", status);
 		}
 	}
 #endif /* ADMHC_VERBOSE_DEBUG */
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
index 2d2604aa78..78b1aef134 100644
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
@@ -45,7 +45,7 @@
 #include "../core/hcd.h"
 #include "../core/hub.h"
 
-#define DRIVER_VERSION	"0.16.3"
+#define DRIVER_VERSION	"0.24.0"
 #define DRIVER_AUTHOR	"Gabor Juhos <juhosg at openwrt.org>"
 #define DRIVER_DESC	"ADMtek USB 1.1 Host Controller Driver"
 
@@ -83,8 +83,8 @@ static void admhc_stop(struct usb_hcd *hcd);
 /*
  * queue up an urb for anything except the root hub
  */
-static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
-	struct urb *urb, gfp_t mem_flags)
+static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags)
 {
 	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
 	struct ed	*ed;
@@ -96,12 +96,12 @@ static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
 
 #ifdef ADMHC_VERBOSE_DEBUG
 	spin_lock_irqsave(&ahcd->lock, flags);
-	urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe));
+	urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
 	spin_unlock_irqrestore(&ahcd->lock, flags);
 #endif
 
 	/* every endpoint has an ed, locate and maybe (re)initialize it */
-	ed = ed_get(ahcd, ep, urb->dev, pipe, urb->interval);
+	ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
 	if (!ed)
 		return -ENOMEM;
 
@@ -161,22 +161,17 @@ static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
 		goto fail;
 	}
 
-	/* in case of unlink-during-submit */
-	spin_lock(&urb->lock);
-	if (urb->status != -EINPROGRESS) {
-		spin_unlock(&urb->lock);
-		urb->hcpriv = urb_priv;
-		finish_urb(ahcd, urb);
-		ret = 0;
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
 		goto fail;
-	}
 
 	/* schedule the ed if needed */
 	if (ed->state == ED_IDLE) {
 		ret = ed_schedule(ahcd, ed);
-		if (ret < 0)
-			goto fail0;
-
+		if (ret < 0) {
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			goto fail;
+		}
 		if (ed->type == PIPE_ISOCHRONOUS) {
 			u16	frame = admhc_frame_no(ahcd);
 
@@ -204,8 +199,6 @@ static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
 	admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
 #endif
 
-fail0:
-	spin_unlock(&urb->lock);
 fail:
 	if (ret)
 		urb_priv_free(ahcd, urb_priv);
@@ -215,23 +208,28 @@ fail:
 }
 
 /*
- * decouple the URB from the HC queues (TDs, urb_priv); it's
- * already marked using urb->status.  reporting is always done
+ * decouple the URB from the HC queues (TDs, urb_priv);
+ * reporting is always done
  * asynchronously, and we might be dealing with an urb that's
  * partially transferred, or an ED with other urbs being unlinked.
  */
-static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+		int status)
 {
 	struct admhcd *ahcd = hcd_to_admhcd(hcd);
 	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&ahcd->lock, flags);
 
 #ifdef ADMHC_VERBOSE_DEBUG
-	urb_print(ahcd, urb, "DEQUEUE", 1);
+	urb_print(ahcd, urb, "DEQUEUE", 1, status);
 #endif
-
-	if (HC_IS_RUNNING(hcd->state)) {
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret) {
+		/* Do nothing */
+		;
+	} else if (HC_IS_RUNNING(hcd->state)) {
 		struct urb_priv *urb_priv;
 
 		/* Unless an IRQ completed the unlink while it was being
@@ -249,11 +247,11 @@ static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 		 * any more ... just clean up every urb's memory.
 		 */
 		if (urb->hcpriv)
-			finish_urb(ahcd, urb);
+			finish_urb(ahcd, urb, status);
 	}
 	spin_unlock_irqrestore(&ahcd->lock, flags);
 
-	return 0;
+	return ret;
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
index ac7bf6cfcc..c88e44829f 100644
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
@@ -383,9 +383,8 @@ static int admhc_restart(struct admhcd *ahcd)
 					ed, ed->state);
 		}
 
-		spin_lock(&urb->lock);
-		urb->status = -ESHUTDOWN;
-		spin_unlock(&urb->lock);
+		if (!urb->unlinked)
+			urb->unlinked = -ESHUTDOWN;
 	}
 	finish_unlinks(ahcd, 0);
 	spin_unlock_irq(&ahcd->lock);
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
index 52bd1e4e82..632140b75e 100644
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
@@ -23,31 +23,14 @@
  * PRECONDITION:  ahcd lock held, irqs blocked.
  */
 static void
-finish_urb(struct admhcd *ahcd, struct urb *urb)
+finish_urb(struct admhcd *ahcd, struct urb *urb, int status)
 __releases(ahcd->lock)
 __acquires(ahcd->lock)
 {
 	urb_priv_free(ahcd, urb->hcpriv);
-	urb->hcpriv = NULL;
 
-	spin_lock(&urb->lock);
-	if (likely(urb->status == -EINPROGRESS))
-		urb->status = 0;
-
-	/* report short control reads right even though the data TD always
-	 * has TD_R set.  (much simpler, but creates the 1-td limit.)
-	 */
-	if (unlikely(urb->transfer_flags & URB_SHORT_NOT_OK)
-			&& unlikely(usb_pipecontrol(urb->pipe))
-			&& urb->actual_length < urb->transfer_buffer_length
-			&& usb_pipein(urb->pipe)
-			&& urb->status == 0) {
-		urb->status = -EREMOTEIO;
-#ifdef ADMHC_VERBOSE_DEBUG
-		urb_print(ahcd, urb, "SHORT", usb_pipeout(urb->pipe));
-#endif
-	}
-	spin_unlock(&urb->lock);
+	if (likely(status == -EINPROGRESS))
+		status = 0;
 
 	switch (usb_pipetype(urb->pipe)) {
 	case PIPE_ISOCHRONOUS:
@@ -59,12 +42,13 @@ __acquires(ahcd->lock)
 	}
 
 #ifdef ADMHC_VERBOSE_DEBUG
-	urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe));
+	urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe), status);
 #endif
 
 	/* urb->complete() can reenter this HCD */
+	usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
 	spin_unlock(&ahcd->lock);
-	usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb);
+	usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status);
 	spin_lock(&ahcd->lock);
 }
 
@@ -571,9 +555,7 @@ static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
  * Done List handling functions
  *-------------------------------------------------------------------------*/
 
-/* calculate transfer length/status and update the urb
- * PRECONDITION:  irqsafe (only for urb->status locking)
- */
+/* calculate transfer length/status and update the urb */
 static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
 {
 	struct urb_priv *urb_priv = urb->hcpriv;
@@ -582,6 +564,7 @@ static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
 	u32	tdDBP;
 	int	type = usb_pipetype(urb->pipe);
 	int	cc;
+	int	status = -EINPROGRESS;
 
 	info = hc32_to_cpup(ahcd, &td->hwINFO);
 	tdDBP = hc32_to_cpup(ahcd, &td->hwDBP);
@@ -596,10 +579,9 @@ static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
 		/* NOTE:  assumes FC in tdINFO == 0, and that
 		 * only the first of 0..MAXPSW psws is used.
 		 */
-#if 0
-		if (tdINFO & TD_CC)	/* hc didn't touch? */
-			return;
-#endif
+		if (info & TD_CC)	/* hc didn't touch? */
+			return status;
+
 		if (usb_pipeout(urb->pipe))
 			dlen = urb->iso_frame_desc[td->index].length;
 		else {
@@ -628,12 +610,9 @@ static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
 				&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
 			cc = TD_CC_NOERROR;
 
-		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) {
-			spin_lock(&urb->lock);
-			if (urb->status == -EINPROGRESS)
-				urb->status = cc_to_error[cc];
-			spin_unlock(&urb->lock);
-		}
+		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
+			status = cc_to_error[cc];
+
 
 		/* count all non-empty packets except control SETUP packet */
 		if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) {
@@ -651,15 +630,16 @@ static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
 	list_del(&td->td_list);
 	urb_priv->td_idx++;
 
-	return cc;
+	return status;
 }
 
 /*-------------------------------------------------------------------------*/
 
-static inline struct td *
+static inline void
 ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
 {
 	struct urb		*urb = td->urb;
+	struct urb_priv		*urb_priv = urb->hcpriv;
 	struct ed		*ed = td->ed;
 	struct list_head	*tmp = td->td_list.next;
 	__hc32			toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
@@ -672,13 +652,12 @@ ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
 	wmb();
 	ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
 
-	/* put any later tds from this urb onto the donelist, after 'td',
-	 * order won't matter here: no errors, and nothing was transferred.
-	 * also patch the ed so it looks as if those tds completed normally.
+	/* Get rid of all later tds from this urb. We don't have
+	 * to be careful: no errors and nothing was transferred.
+	 * Also patch the ed so it looks as if those tds completed normally.
 	 */
 	while (tmp != &ed->td_list) {
 		struct td	*next;
-		__hc32		info;
 
 		next = list_entry(tmp, struct td, td_list);
 		tmp = next->td_list.next;
@@ -693,16 +672,8 @@ ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
 		 * then we need to leave the control STATUS packet queued
 		 * and clear ED_SKIP.
 		 */
-		info = next->hwINFO;
-#if 0		/* FIXME */
-		info |= cpu_to_hc32(ahcd, TD_DONE);
-#endif
-		info &= ~cpu_to_hc32(ahcd, TD_CC);
-		next->hwINFO = info;
-
-		next->next_dl_td = rev;
-		rev = next;
-
+		list_del(&next->td_list);
+		urb_priv->td_cnt++;
 		ed->hwHeadP = next->hwNextTD | toggle;
 	}
 
@@ -728,8 +699,6 @@ ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
 			hc32_to_cpu(ahcd, td->hwINFO),
 			cc, cc_to_error [cc]);
 	}
-
-	return rev;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -796,12 +765,13 @@ rescan_this:
 			struct urb	*urb;
 			struct urb_priv	*urb_priv;
 			__hc32		savebits;
+			int		status;
 
 			td = list_entry(entry, struct td, td_list);
 			urb = td->urb;
 			urb_priv = td->urb->hcpriv;
 
-			if (urb->status == -EINPROGRESS) {
+			if (!urb->unlinked) {
 				prev = &td->hwNextTD;
 				continue;
 			}
@@ -817,12 +787,12 @@ rescan_this:
 #ifdef ADMHC_VERBOSE_DEBUG
 			urb_print(ahcd, urb, "PARTIAL", 0);
 #endif
-			td_done(ahcd, urb, td);
+			status = td_done(ahcd, urb, td);
 
 			/* if URB is done, clean up */
 			if (urb_priv->td_idx == urb_priv->td_cnt) {
 				modified = completed = 1;
-				finish_urb(ahcd, urb);
+				finish_urb(ahcd, urb, status);
 			}
 		}
 		if (completed && !list_empty(&ed->td_list))
@@ -920,13 +890,13 @@ static void ed_update(struct admhcd *ahcd, struct ed *ed)
 		struct td *td = list_entry(entry, struct td, td_list);
 		struct urb *urb = td->urb;
 		struct urb_priv *urb_priv = urb->hcpriv;
-		int cc;
+		int status;
 
 		if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
 			break;
 
 		/* update URB's length and status from TD */
-		cc = td_done(ahcd, urb, td);
+		status = td_done(ahcd, urb, td);
 		if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td))
 			ed_unhalt(ahcd, ed, urb);
 
@@ -935,7 +905,7 @@ static void ed_update(struct admhcd *ahcd, struct ed *ed)
 
 		/* If all this urb's TDs are done, call complete() */
 		if (urb_priv->td_idx == urb_priv->td_cnt)
-			finish_urb(ahcd, urb);
+			finish_urb(ahcd, urb, status);
 
 		/* clean schedule:  unlink EDs that are no longer busy */
 		if (list_empty(&ed->td_list)) {
diff --git a/target/linux/adm5120/patches-2.6.23/001-adm5120.patch b/target/linux/adm5120/patches-2.6.23/001-adm5120.patch
deleted file mode 100644
index 5cf66ec8f6..0000000000
--- a/target/linux/adm5120/patches-2.6.23/001-adm5120.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-Index: linux-2.6.23.14/arch/mips/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/arch/mips/Kconfig
-+++ linux-2.6.23.14/arch/mips/Kconfig
-@@ -15,6 +15,18 @@ choice
- 	prompt "System type"
- 	default SGI_IP22
- 
-+config MIPS_ADM5120
-+	bool "ADM5120 SoC based machines"
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_EARLY_PRINTK
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select GENERIC_GPIO
-+
- config MACH_ALCHEMY
- 	bool "Alchemy processor based machines"
- 
-@@ -597,6 +609,7 @@ config WR_PPMC
- 
- endchoice
- 
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/au1000/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-Index: linux-2.6.23.14/arch/mips/Makefile
-===================================================================
---- linux-2.6.23.14.orig/arch/mips/Makefile
-+++ linux-2.6.23.14/arch/mips/Makefile
-@@ -168,6 +168,16 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
- load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
- 
- #
-+# ADMtek 5120
-+#
-+
-+libs-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/prom/
-+core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/
-+core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/boards/
-+cflags-$(CONFIG_MIPS_ADM5120)	+= -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120)	+= 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.23.14/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.23.14.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.23.14/include/asm-mips/bootinfo.h
-@@ -208,6 +208,58 @@
- #define MACH_GROUP_WINDRIVER   28	/* Windriver boards */
- #define MACH_WRPPMC             1
- 
-+/*
-+ * Valid machtype for group ADMtek ADM5120
-+ */
-+#define MACH_ADM5120_GENERIC	0	/* Generic board */
-+#define MACH_ADM5120_WP54G_WRT	1	/* Compex WP54G-WRT */
-+#define MACH_ADM5120_WP54G	2	/* Compex WP54G */
-+#define MACH_ADM5120_WP54AG	3	/* Compex WP54AG */
-+#define MACH_ADM5120_WPP54G	4	/* Compex WPP54G */
-+#define MACH_ADM5120_WPP54AG	5	/* Compex WPP54AG */
-+#define MACH_ADM5120_NP28G	6	/* Compex NP28G */
-+#define MACH_ADM5120_NP28GHS	7	/* Compex NP28G HotSpot */
-+#define MACH_ADM5120_NP27G	8	/* Compex NP27G */
-+#define MACH_ADM5120_WP54Gv1C	9	/* Compex WP54G version 1C */
-+#define MACH_ADM5120_RB_111	10	/* Mikrotik RouterBOARD 111 */
-+#define MACH_ADM5120_RB_112	11	/* Mikrotik RouterBOARD 112 */
-+#define MACH_ADM5120_RB_133	12	/* Mikrotik RouterBOARD 133 */
-+#define MACH_ADM5120_RB_133C	13	/* Mikrotik RouterBOARD 133c */
-+#define MACH_ADM5120_RB_150	14	/* Mikrotik RouterBOARD 150 */
-+#define MACH_ADM5120_RB_153	15	/* Mikrotik RouterBOARD 153 */
-+#define MACH_ADM5120_HS100	16	/* ZyXEL HomeSafe 100/100W */
-+#define MACH_ADM5120_P334	17	/* ZyXEL Prestige 334 */
-+#define MACH_ADM5120_P334U	18	/* ZyXEL Prestige 334U */
-+#define MACH_ADM5120_P334W	19	/* ZyXEL Prestige 334W */
-+#define MACH_ADM5120_P334WH	20	/* ZyXEL Prestige 334WH */
-+#define MACH_ADM5120_P334WHD	21	/* ZyXEL Prestige 334WHD */
-+#define MACH_ADM5120_P334WT	22	/* ZyXEL Prestige 334WT */
-+#define MACH_ADM5120_P335	23	/* ZyXEL Prestige 335/335WT */
-+#define MACH_ADM5120_P335PLUS	24	/* ZyXEL Prestige 335Plus */
-+#define MACH_ADM5120_P335U	25	/* ZyXEL Prestige 335U */
-+#define MACH_ADM5120_ES2108	26	/* ZyXEL Ethernet Switch 2108 */
-+#define MACH_ADM5120_ES2108F	27	/* ZyXEL Ethernet Switch 2108-F */
-+#define MACH_ADM5120_ES2108G	28	/* ZyXEL Ethernet Switch 2108-G */
-+#define MACH_ADM5120_ES2108LC	29	/* ZyXEL Ethernet Switch 2108-LC */
-+#define MACH_ADM5120_ES2108PWR	30	/* ZyXEL Ethernet Switch 2108-PWR */
-+#define MACH_ADM5120_ES2024A	31	/* ZyXEL Ethernet Switch 2024A */
-+#define MACH_ADM5120_ES2024PWR	32	/* ZyXEL Ethernet Switch 2024PWR */
-+#define MACH_ADM5120_CAS630	33	/* Cellvision CAS-630/630W */
-+#define MACH_ADM5120_CAS670	34	/* Cellvision CAS-670/670W */
-+#define MACH_ADM5120_CAS700	36	/* Cellvision CAS-700/700W */
-+#define MACH_ADM5120_CAS771	37	/* Cellvision CAS-771/771W */
-+#define MACH_ADM5120_CAS790	38	/* Cellvision CAS-790 */
-+#define MACH_ADM5120_CAS861	39	/* Cellvision CAS-861/861W */
-+#define MACH_ADM5120_NFS101U	40	/* Cellvision NFS-101U/101WU */
-+#define MACH_ADM5120_NFS202U	41	/* Cellvision NFS-202U/202WU */
-+#define MACH_ADM5120_EASY5120PATA 42	/* Infineon EASY 5120P-ATA */
-+#define MACH_ADM5120_EASY5120RT 43	/* Infineon EASY 5120-RT */
-+#define MACH_ADM5120_EASY5120WVOIP 44	/* Infineon EASY 5120-WVoIP */
-+#define MACH_ADM5120_EASY83000	45	/* Infineon EASY-83000 */
-+#define MACH_ADM5120_BR6104K	46	/* Edimax BR-6104K/BR-6104KP */
-+#define MACH_ADM5120_RB_192	47	/* Mikrotik RouterBOARD 192 */
-+#define MACH_ADM5120_BR61x4WG	48	/* Edimax BR-6104Wg/BR-6114WG */
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);
diff --git a/target/linux/adm5120/patches-2.6.23/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.23/002-adm5120_flash.patch
deleted file mode 100644
index b1f36a1e2b..0000000000
--- a/target/linux/adm5120/patches-2.6.23/002-adm5120_flash.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-Index: linux-2.6.23.14/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.23.14/drivers/mtd/maps/Kconfig
-@@ -614,5 +614,9 @@ config MTD_PLATRAM
- 
- 	  This selection automatically selects the map_ram driver.
- 
-+config MTD_ADM5120
-+	tristate "Map driver for ADM5120 based boards"
-+	depends on MIPS_ADM5120
-+
- endmenu
- 
-Index: linux-2.6.23.14/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.23.14/drivers/mtd/maps/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)      	+= adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
diff --git a/target/linux/adm5120/patches-2.6.23/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.23/003-adm5120_switch.patch
deleted file mode 100644
index ef80cf7fe8..0000000000
--- a/target/linux/adm5120/patches-2.6.23/003-adm5120_switch.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Index: linux-2.6.23.14/drivers/net/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/net/Kconfig
-+++ linux-2.6.23.14/drivers/net/Kconfig
-@@ -589,6 +589,10 @@ config MIPS_AU1X00_ENET
- 	  If you have an Alchemy Semi AU1X00 based system
- 	  say Y.  Otherwise, say N.
- 
-+config MIPS_ADM5120_ENET
-+	tristate "MIPS ADM5120 Ethernet switch support"
-+	depends on NET_ETHERNET && MIPS_ADM5120
-+
- config NET_SB1250_MAC
- 	tristate "SB1250 Ethernet support"
- 	depends on SIBYTE_SB1xxx_SOC
-Index: linux-2.6.23.14/drivers/net/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/net/Makefile
-+++ linux-2.6.23.14/drivers/net/Makefile
-@@ -174,6 +174,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
- 
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches-2.6.23/004-adm5120_nand.patch b/target/linux/adm5120/patches-2.6.23/004-adm5120_nand.patch
deleted file mode 100644
index 1e61a06572..0000000000
--- a/target/linux/adm5120/patches-2.6.23/004-adm5120_nand.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-Index: linux-2.6.23.14/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.23.14/drivers/mtd/nand/Kconfig
-@@ -81,6 +81,16 @@ config MTD_NAND_TS7250
- 	help
- 	  Support for NAND flash on Technologic Systems TS-7250 platform.
- 
-+config MTD_NAND_ADM5120
-+	tristate "ADM5120 NAND support"
-+	depends on MTD_NAND && MIPS_ADM5120
-+	help
-+	  This enables the driver for the ADM5120 SoC built-in
-+	  NAND flash interface.
-+
-+	  No board specific support is done by this driver, each board
-+	  must advertise a platform_device for the driver to attach.
-+
- config MTD_NAND_IDS
- 	tristate
- 
-Index: linux-2.6.23.14/drivers/mtd/nand/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.23.14/drivers/mtd/nand/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nan
- obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
- obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
- obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
-+obj-$(CONFIG_MTD_NAND_ADM5120)		+= adm5120-nand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
diff --git a/target/linux/adm5120/patches-2.6.23/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.23/005-adm5120_usb.patch
deleted file mode 100644
index c1b4ea31c2..0000000000
--- a/target/linux/adm5120/patches-2.6.23/005-adm5120_usb.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-Index: linux-2.6.23.14/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.23.14/drivers/usb/host/Kconfig
-@@ -248,3 +248,6 @@ config USB_R8A66597_HCD
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called r8a66597-hcd.
- 
-+config USB_ADM5120_HCD
-+	tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+	depends on USB && MIPS_ADM5120 && EXPERIMENTAL
-Index: linux-2.6.23.14/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/usb/host/Makefile
-+++ linux-2.6.23.14/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@ endif
- 
- obj-$(CONFIG_PCI)		+= pci-quirks.o
- 
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
- obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-Index: linux-2.6.23.14/drivers/usb/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/usb/Makefile
-+++ linux-2.6.23.14/drivers/usb/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
- obj-$(CONFIG_USB_SL811_HCD)	+= host/
- obj-$(CONFIG_USB_U132_HCD)	+= host/
- obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
-+obj-$(CONFIG_USB_ADM5120_HCD)  	+= host/
- 
- obj-$(CONFIG_USB_ACM)		+= class/
- obj-$(CONFIG_USB_PRINTER)	+= class/
diff --git a/target/linux/adm5120/patches-2.6.23/006-adm5120_leds.patch b/target/linux/adm5120/patches-2.6.23/006-adm5120_leds.patch
deleted file mode 100644
index 8b5d86832f..0000000000
--- a/target/linux/adm5120/patches-2.6.23/006-adm5120_leds.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Index: linux-2.6.23.14/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/leds/Kconfig
-+++ linux-2.6.23.14/drivers/leds/Kconfig
-@@ -18,6 +18,21 @@ config LEDS_CLASS
- 
- comment "LED drivers"
- 
-+config LEDS_ADM5120
-+	tristate "LED Support for ADM5120 GPIO LEDs"
-+	depends on LEDS_GPIO && MIPS_ADM5120
-+	help
-+	  This option enables support for LEDs connected to GPIO lines
-+	  on ADM5120 SoC based platforms.
-+
-+config LEDS_ADM5120_EXPERIMENTAL
-+	bool "Enable ADM5120 LEDs experimental code"
-+	depends on LEDS_ADM5120
-+
-+config LEDS_ADM5120_DIAG
-+	bool "Enable ADM5120 LEDs diagnostic mode"
-+	depends on LEDS_ADM5120
-+
- config LEDS_CORGI
- 	tristate "LED Support for the Sharp SL-C7x0 series"
- 	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.23.14/drivers/leds/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/leds/Makefile
-+++ linux-2.6.23.14/drivers/leds/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
- obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
- 
- # LED Platform Drivers
-+obj-$(CONFIG_LEDS_ADM5120)		+= leds-adm5120.o
- obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
- obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
diff --git a/target/linux/adm5120/patches-2.6.23/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.23/007-adm5120_pci.patch
deleted file mode 100644
index d44bd2d27d..0000000000
--- a/target/linux/adm5120/patches-2.6.23/007-adm5120_pci.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-Index: linux-2.6.23.14/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.23.14.orig/arch/mips/pci/Makefile
-+++ linux-2.6.23.14/arch/mips/pci/Makefile
-@@ -46,3 +46,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
- obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120)	+= pci-adm5120.o
-Index: linux-2.6.23.14/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.23.14.orig/include/linux/pci_ids.h
-+++ linux-2.6.23.14/include/linux/pci_ids.h
-@@ -1698,6 +1698,9 @@
- #define PCI_VENDOR_ID_ESDGMBH		0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
- 
-+#define PCI_VENDOR_ID_ADMTEK		0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120	0x5120
-+
- #define PCI_VENDOR_ID_SIIG		0x131f
- #define PCI_SUBVENDOR_ID_SIIG		0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
diff --git a/target/linux/adm5120/patches-2.6.23/008-adm5120_uart.patch b/target/linux/adm5120/patches-2.6.23/008-adm5120_uart.patch
deleted file mode 100644
index 3490e90805..0000000000
--- a/target/linux/adm5120/patches-2.6.23/008-adm5120_uart.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-Index: linux-2.6.23.14/drivers/serial/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/serial/Makefile
-+++ linux-2.6.23.14/drivers/serial/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
- obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
-+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
- obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
- obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
- obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.23.14/include/linux/serial_core.h
-===================================================================
---- linux-2.6.23.14.orig/include/linux/serial_core.h
-+++ linux-2.6.23.14/include/linux/serial_core.h
-@@ -147,6 +147,9 @@
- #define PORT_SB1250_DUART	77
- 
- 
-+/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120	77
-+
- #ifdef __KERNEL__
- 
- #include <linux/compiler.h>
-Index: linux-2.6.23.14/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/serial/Kconfig
-+++ linux-2.6.23.14/drivers/serial/Kconfig
-@@ -280,6 +280,22 @@ config SERIAL_8250_RM9K
- 
- comment "Non-8250 serial port support"
- 
-+config SERIAL_ADM5120
-+       bool "ADM5120 serial port support"
-+       depends on MIPS_ADM5120
-+       select SERIAL_CORE
-+       select SERIAL_CORE_CONSOLE
-+       help
-+         Driver for the on chip UARTs on the ADM5120 SoC
-+
-+config ADM5120_NR_UARTS
-+       int "Maximum number of ADM5120 serial ports"
-+       depends on SERIAL_ADM5120
-+       default "2"
-+       ---help---
-+         Set this to the number of serial ports you want the driver to
-+         support.
-+
- config SERIAL_AMBA_PL010
- 	tristate "ARM AMBA PL010 serial port support"
- 	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff --git a/target/linux/adm5120/patches-2.6.23/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.23/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644
index 248d7b38e9..0000000000
--- a/target/linux/adm5120/patches-2.6.23/009-adm5120_leds_switch_trigger.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-Index: linux-2.6.23.14/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/leds/Kconfig
-+++ linux-2.6.23.14/drivers/leds/Kconfig
-@@ -165,4 +165,12 @@ config LEDS_TRIGGER_DEFAULT_ON
- 	  This allows LEDs to be initialised in the ON state.
- 	  If unsure, say Y.
- 
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+	tristate "LED ADM5120 Switch Port Status Trigger"
-+	depends on LEDS_TRIGGERS && LEDS_ADM5120
-+	help
-+	  This allows LEDs to be controlled by the port states of
-+	  the ADM5120 built-in Ethernet Switch
-+	  If unsure, say N.
-+
- endif # NEW_LEDS
-Index: linux-2.6.23.14/drivers/leds/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/leds/Makefile
-+++ linux-2.6.23.14/drivers/leds/Makefile
-@@ -26,3 +26,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= l
- obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.23/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.23/100-mtd_myloder_partition_parser.patch
deleted file mode 100644
index eaa1645fe6..0000000000
--- a/target/linux/adm5120/patches-2.6.23/100-mtd_myloder_partition_parser.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Index: linux-2.6.23.14/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/Kconfig
-+++ linux-2.6.23.14/drivers/mtd/Kconfig
-@@ -160,6 +160,22 @@ config MTD_AFS_PARTS
- 	  for your particular device. It won't happen automatically. The
- 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on MIPS_ADM5120 && MTD_PARTITIONS
-+	---help---
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the 
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- 
- config MTD_CHAR
-Index: linux-2.6.23.14/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/Makefile
-+++ linux-2.6.23.14/drivers/mtd/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/adm5120/patches-2.6.23/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.23/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644
index f3f678eb2e..0000000000
--- a/target/linux/adm5120/patches-2.6.23/101-cfi_fixup_macronix_bootloc.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-Index: linux-2.6.23.14/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.23.14/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -47,12 +47,19 @@
- #define MANUFACTURER_AMD	0x0001
- #define MANUFACTURER_ATMEL	0x001F
- #define MANUFACTURER_SST	0x00BF
-+#define MANUFACTURER_MACRONIX	0x00C2
- #define SST49LF004B	        0x0060
- #define SST49LF040B	        0x0050
- #define SST49LF008A		0x005a
- #define AT49BV6416		0x00d6
- #define MANUFACTURER_SAMSUNG	0x00ec
- 
-+/* Macronix */
-+#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T	0x22C4	/* MX29LV160 Top-boot chip */
-+#define MX29LV320B	0x22A8	/* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T	0x22A7	/* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct 
- 	mtd->flags |= MTD_STUPID_LOCK;
- }
- 
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+	__u8 t;
-+
-+	switch (cfi->id) {
-+	/* TODO: put affected chip ids here */
-+	case MX29LV160B:
-+	case MX29LV320B:
-+		t = 2;	/* Bottom boot */
-+		break;
-+	case MX29LV160T:
-+	case MX29LV320T:
-+		t = 3;	/* Top boot */
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	if (extp->TopBottom == t)
-+		/* boot location detected by the CFI layer is correct */
-+		return;
-+
-+	extp->TopBottom = t;
-+	printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+		"to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- #ifdef AMD_BOOTLOC_BUG
- 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
-@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
- 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	{ MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
- 	{ 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.23.14/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.23.14/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
- 	  provides support for one of those command sets, used on chips
- 	  including the AMD Am29LV320.
- 
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	bool "Fix boot-block location for Macronix flash chips"
-+	depends on MTD_CFI_AMDSTD
-+	help
-+	  Some Macronix flash chips have no/wrong boot-block location in the
-+	  CFI table, and the driver may detect the type incorrectly. Select
-+	  this if your board has such chip.
-+
- config MTD_CFI_STAA
- 	tristate "Support for ST (Advanced Architecture) flash chips"
- 	depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-2.6.23/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.23/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644
index 4c8414d7c8..0000000000
--- a/target/linux/adm5120/patches-2.6.23/102-jedec_pmc_39lvxxx_chips.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-Index: linux-2.6.23.14/drivers/mtd/chips/jedec_probe.c
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.23.14/drivers/mtd/chips/jedec_probe.c
-@@ -121,6 +121,10 @@
- #define UPD29F064115	0x221C
- 
- /* PMC */
-+#define PM39LV512	0x001B
-+#define PM39LV010	0x001C
-+#define PM39LV020	0x003D
-+#define PM39LV040	0x003E
- #define PM49FL002	0x006D
- #define PM49FL004	0x006E
- #define PM49FL008	0x006A
-@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x02000,2),
- 			ERASEINFO(0x04000,1),
- 		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV512,
-+		.name		= "PMC Pm39LV512",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_64KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,16),
-+		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV010,
-+		.name		= "PMC Pm39LV010",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_128KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,32),
-+		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV020,
-+		.name		= "PMC Pm39LV020",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_256KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,64),
-+		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV040,
-+		.name		= "PMC Pm39LV040",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_512KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,128),
-+		}
- 	}, {
- 		.mfr_id		= MANUFACTURER_PMC,
- 		.dev_id		= PM49FL002,
diff --git a/target/linux/adm5120/patches-2.6.23/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.23/103-mtd_trxsplit.patch
deleted file mode 100644
index a9cad0420c..0000000000
--- a/target/linux/adm5120/patches-2.6.23/103-mtd_trxsplit.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-Index: linux-2.6.23.14/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/Kconfig
-+++ linux-2.6.23.14/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
- 	depends on MTD_PARTITIONS
- 	default y
- 
-+config MTD_TRXSPLIT
-+	bool "Automatically find and split TRX partitions"
-+	depends on MTD_PARTITIONS
-+	default n
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	depends on MTD_PARTITIONS
-Index: linux-2.6.23.14/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/mtd/Makefile
-+++ linux-2.6.23.14/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
- mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
- 
- obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT)	+= trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
diff --git a/target/linux/adm5120/patches-2.6.23/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.23/120-rb153_cf_driver.patch
deleted file mode 100644
index 95cf5cf31e..0000000000
--- a/target/linux/adm5120/patches-2.6.23/120-rb153_cf_driver.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-Index: linux-2.6.23.14/drivers/ata/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/ata/Makefile
-+++ linux-2.6.23.14/drivers/ata/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp
- obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
- obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
- obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
-+obj-$(CONFIG_PATA_RB153_CF)	+= pata_rb153_cf.o
- # Should be last but one libata driver
- obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
- # Should be last libata driver
-Index: linux-2.6.23.14/drivers/ata/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/ata/Kconfig
-+++ linux-2.6.23.14/drivers/ata/Kconfig
-@@ -596,4 +596,13 @@ config PATA_SCC
- 
- 	  If unsure, say N.
- 
-+config PATA_RB153_CF
-+	tristate "RouterBOARD 153 Compact Flash support"
-+	depends on MIPS_ADM5120
-+	help
-+	  This option enables support for a Compact Flash connected on
-+	  the RouterBOARD 153.
-+
-+	  If unsure, say N.
-+
- endif # ATA
diff --git a/target/linux/adm5120/patches-2.6.23/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.23/140-cmdline_hack.patch
deleted file mode 100644
index d8c5363a9a..0000000000
--- a/target/linux/adm5120/patches-2.6.23/140-cmdline_hack.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Index: linux-2.6.23.14/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.23.14.orig/arch/mips/kernel/head.S
-+++ linux-2.6.23.14/arch/mips/kernel/head.S
-@@ -136,7 +136,12 @@
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
-+	 * Use as temporary storage for the kernel command line, so that it
-+	 * can be updated easily without having to relink the kernel.
- 	 */
-+
-+EXPORT(_image_cmdline)
-+	.ascii "CMDLINE:"
- 	.fill	0x400
- #endif
- 
diff --git a/target/linux/adm5120/patches-2.6.23/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.23/200-amba_pl010_hacks.patch
deleted file mode 100644
index 78277de22a..0000000000
--- a/target/linux/adm5120/patches-2.6.23/200-amba_pl010_hacks.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-Index: linux-2.6.23.14/drivers/serial/amba-pl010.c
-===================================================================
---- linux-2.6.23.14.orig/drivers/serial/amba-pl010.c
-+++ linux-2.6.23.14/drivers/serial/amba-pl010.c
-@@ -52,11 +52,10 @@
- 
- #include <asm/io.h>
- 
--#define UART_NR		8
--
- #define SERIAL_AMBA_MAJOR	204
- #define SERIAL_AMBA_MINOR	16
--#define SERIAL_AMBA_NR		UART_NR
-+#define SERIAL_AMBA_NR		CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME	CONFIG_SERIAL_AMBA_PL010_PORTNAME
- 
- #define AMBA_ISR_PASS_LIMIT	256
- 
-@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = readl(uap->port.membase + UART010_CR);
- 	cr &= ~UART010_CR_TIE;
- 	writel(cr, uap->port.membase + UART010_CR);
- }
-@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_TIE;
- 	writel(cr, uap->port.membase + UART010_CR);
- }
-@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = readl(uap->port.membase + UART010_CR);
- 	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
- 	writel(cr, uap->port.membase + UART010_CR);
- }
-@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_MSIE;
- 	writel(cr, uap->port.membase + UART010_CR);
- }
-@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
- 	struct tty_struct *tty = uap->port.info->tty;
- 	unsigned int status, ch, flag, rsr, max_count = 256;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = readl(uap->port.membase + UART01x_FR);
- 	while (UART_RX_DATA(status) && max_count--) {
--		ch = readb(uap->port.membase + UART01x_DR);
-+		ch = readl(uap->port.membase + UART01x_DR);
- 		flag = TTY_NORMAL;
- 
- 		uap->port.icount.rx++;
-@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
- 		 * Note that the error handling code is
- 		 * out of the main execution path
- 		 */
--		rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+		rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
- 		if (unlikely(rsr & UART01x_RSR_ANY)) {
- 			writel(0, uap->port.membase + UART01x_ECR);
- 
-@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
- 		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
- 
- 	ignore_char:
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = readl(uap->port.membase + UART01x_FR);
- 	}
- 	spin_unlock(&uap->port.lock);
- 	tty_flip_buffer_push(tty);
-@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
- 
- 	writel(0, uap->port.membase + UART010_ICR);
- 
--	status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	delta = status ^ uap->old_status;
- 	uap->old_status = status;
-@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
- 
- 	spin_lock(&uap->port.lock);
- 
--	status = readb(uap->port.membase + UART010_IIR);
-+	status = readl(uap->port.membase + UART010_IIR);
- 	if (status) {
- 		do {
- 			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
- 			if (pass_counter-- == 0)
- 				break;
- 
--			status = readb(uap->port.membase + UART010_IIR);
-+			status = readl(uap->port.membase + UART010_IIR);
- 		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
- 				   UART010_IIR_TIS));
- 		handled = 1;
-@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
--	unsigned int status = readb(uap->port.membase + UART01x_FR);
-+	unsigned int status = readl(uap->port.membase + UART01x_FR);
- 	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
- 
-@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
- 	unsigned int result = 0;
- 	unsigned int status;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = readl(uap->port.membase + UART01x_FR);
- 	if (status & UART01x_FR_DCD)
- 		result |= TIOCM_CAR;
- 	if (status & UART01x_FR_DSR)
-@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
- 	unsigned int lcr_h;
- 
- 	spin_lock_irqsave(&uap->port.lock, flags);
--	lcr_h = readb(uap->port.membase + UART010_LCRH);
-+	lcr_h = readl(uap->port.membase + UART010_LCRH);
- 	if (break_state == -1)
- 		lcr_h |= UART01x_LCRH_BRK;
- 	else
-@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
- 	/*
- 	 * initialise the old status of the modem signals
- 	 */
--	uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	/*
- 	 * Finally, enable interrupts
-@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
- 	writel(0, uap->port.membase + UART010_CR);
- 
- 	/* disable break condition and fifos */
--	writel(readb(uap->port.membase + UART010_LCRH) &
-+	writel(readl(uap->port.membase + UART010_LCRH) &
- 		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
- 	       uap->port.membase + UART010_LCRH);
- 
-@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
- 	/*
- 	 * Ask the core to calculate the divisor for us.
- 	 */
--	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
- 	quot = uart_get_divisor(port, baud);
- 
- 	switch (termios->c_cflag & CSIZE) {
-@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
- 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
- 
- 	/* first, disable everything */
--	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+	old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
- 
- 	if (UART_ENABLE_MS(port, termios->c_cflag))
- 		old_cr |= UART010_CR_MSIE;
-@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
- 	.verify_port	= pl010_verify_port,
- };
- 
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- 
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
- 
-@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
- 	unsigned int status;
- 
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (!UART_TX_READY(status));
- 	writel(ch, uap->port.membase + UART01x_DR);
-@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, 
- 	/*
- 	 *	First save the CR then disable the interrupts
- 	 */
--	old_cr = readb(uap->port.membase + UART010_CR);
-+	old_cr = readl(uap->port.membase + UART010_CR);
- 	writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
- 
- 	uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, 
- 	 *	and restore the TCR
- 	 */
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (status & UART01x_FR_BUSY);
- 	writel(old_cr, uap->port.membase + UART010_CR);
-@@ -589,9 +588,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
- 			     int *parity, int *bits)
- {
--	if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+	if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
- 		unsigned int lcr_h, quot;
--		lcr_h = readb(uap->port.membase + UART010_LCRH);
-+		lcr_h = readl(uap->port.membase + UART010_LCRH);
- 
- 		*parity = 'n';
- 		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
- 		else
- 			*bits = 8;
- 
--		quot = readb(uap->port.membase + UART010_LCRL) |
--		       readb(uap->port.membase + UART010_LCRM) << 8;
-+		quot = readl(uap->port.membase + UART010_LCRL) |
-+		       readl(uap->port.membase + UART010_LCRM) << 8;
- 		*baud = uap->port.uartclk / (16 * (quot + 1));
- 	}
- }
-@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
- 	 * if so, search for the first available port that does have
- 	 * console support.
- 	 */
--	if (co->index >= UART_NR)
-+	if (co->index >= SERIAL_AMBA_NR)
- 		co->index = 0;
- 	uap = amba_ports[co->index];
- 	if (!uap)
-@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
- 
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--	.name		= "ttyAM",
-+	.name		= SERIAL_AMBA_NAME,
- 	.write		= pl010_console_write,
- 	.device		= uart_console_device,
- 	.setup		= pl010_console_setup,
-@@ -659,11 +658,11 @@ static struct console amba_console = {
- 
- static struct uart_driver amba_reg = {
- 	.owner			= THIS_MODULE,
--	.driver_name		= "ttyAM",
--	.dev_name		= "ttyAM",
-+	.driver_name		= SERIAL_AMBA_NAME,
-+	.dev_name		= SERIAL_AMBA_NAME,
- 	.major			= SERIAL_AMBA_MAJOR,
- 	.minor			= SERIAL_AMBA_MINOR,
--	.nr			= UART_NR,
-+	.nr			= SERIAL_AMBA_NR,
- 	.cons			= AMBA_CONSOLE,
- };
- 
-Index: linux-2.6.23.14/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/serial/Kconfig
-+++ linux-2.6.23.14/drivers/serial/Kconfig
-@@ -303,10 +303,25 @@ config SERIAL_AMBA_PL010
- 	help
- 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
- 	  an Integrator/AP or Integrator/PP2 platform, or if you have a
--	  Cirrus Logic EP93xx CPU, say Y or M here.
-+	  Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
- 
- 	  If unsure, say N.
- 
-+config SERIAL_AMBA_PL010_NUMPORTS
-+	int "Maximum number of AMBA PL010 serial ports"
-+	depends on SERIAL_AMBA_PL010
-+	default "8"
-+	---help---
-+	  Set this to the number of serial ports you want the AMBA PL010 driver
-+	  to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+	string "Name of the AMBA PL010 serial ports"
-+	depends on SERIAL_AMBA_PL010
-+	default "ttyAM"
-+	---help---
-+	  ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
- 	bool "Support for console on AMBA serial port"
- 	depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-2.6.23/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.23/201-amba_bus_hacks.patch
deleted file mode 100644
index 9ad49e0fbf..0000000000
--- a/target/linux/adm5120/patches-2.6.23/201-amba_bus_hacks.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: linux-2.6.23.14/drivers/amba/bus.c
-===================================================================
---- linux-2.6.23.14.orig/drivers/amba/bus.c
-+++ linux-2.6.23.14/drivers/amba/bus.c
-@@ -17,6 +17,10 @@
- #include <asm/io.h>
- #include <asm/sizes.h>
- 
-+#ifndef NO_IRQ
-+#define NO_IRQ		(-1)
-+#endif
-+
- #define to_amba_device(d)	container_of(d, struct amba_device, dev)
- #define to_amba_driver(d)	container_of(d, struct amba_driver, drv)
- 
diff --git a/target/linux/adm5120/patches-2.6.23/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.23/202-pci_disable_common_quirks.patch
deleted file mode 100644
index 4d3cc595c8..0000000000
--- a/target/linux/adm5120/patches-2.6.23/202-pci_disable_common_quirks.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-Index: linux-2.6.23.14/drivers/pci/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/pci/Kconfig
-+++ linux-2.6.23.14/drivers/pci/Kconfig
-@@ -31,6 +31,12 @@ config PCI_DEBUG
- 
- 	  When in doubt, say N.
- 
-+config PCI_DISABLE_COMMON_QUIRKS
-+	bool "PCI disable common quirks"
-+	depends on PCI
-+	help
-+	  If you don't know what to do here, say N.
-+
- config HT_IRQ
- 	bool "Interrupts on hypertransport devices"
- 	default y
-Index: linux-2.6.23.14/drivers/pci/quirks.c
-===================================================================
---- linux-2.6.23.14.orig/drivers/pci/quirks.c
-+++ linux-2.6.23.14/drivers/pci/quirks.c
-@@ -23,6 +23,7 @@
- #include <linux/acpi.h>
- #include "pci.h"
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* The Mellanox Tavor device gives false positive parity errors
-  * Mark this device with a broken_parity_status, to allow
-  * PCI scanning code to "skip" this now blacklisted device.
-@@ -1510,6 +1511,7 @@ static void __devinit fixup_rev1_53c810(
- 	}
- }
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
- 
- static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
- {
-@@ -1573,6 +1575,7 @@ void pci_fixup_device(enum pci_fixup_pas
- }
- EXPORT_SYMBOL(pci_fixup_device);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* Enable 1k I/O space granularity on the Intel P64H2 */
- static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
- {
-@@ -1743,3 +1746,4 @@ static void __devinit quirk_nvidia_ck804
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
- 			quirk_nvidia_ck804_msi_ht_cap);
- #endif /* CONFIG_PCI_MSI */
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
diff --git a/target/linux/adm5120/patches-2.6.23/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.23/203-gpio_leds_brightness.patch
deleted file mode 100644
index e5d8752a8c..0000000000
--- a/target/linux/adm5120/patches-2.6.23/203-gpio_leds_brightness.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-Index: linux-2.6.23.14/drivers/leds/leds-gpio.c
-===================================================================
---- linux-2.6.23.14.orig/drivers/leds/leds-gpio.c
-+++ linux-2.6.23.14/drivers/leds/leds-gpio.c
-@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas
- 		container_of(led_cdev, struct gpio_led_data, cdev);
- 	int level;
- 
--	if (value == LED_OFF)
--		level = 0;
--	else
--		level = 1;
--
--	if (led_dat->active_low)
--		level = !level;
-+	switch (value) {
-+	case LED_OFF:
-+		level = led_dat->active_low ? 1 : 0;
-+		break;
-+	case LED_FULL:
-+		level = led_dat->active_low ? 0 : 1;
-+		break;
-+	default:
-+		level = value;
-+		break;
-+	}
- 
- 	/* setting GPIOs with I2C/etc requires a preemptible task context */
- 	if (led_dat->can_sleep) {
diff --git a/target/linux/adm5120/patches-2.6.23/300-i2c_gpio_custom.patch b/target/linux/adm5120/patches-2.6.23/300-i2c_gpio_custom.patch
deleted file mode 100644
index 800742b324..0000000000
--- a/target/linux/adm5120/patches-2.6.23/300-i2c_gpio_custom.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-Index: linux-2.6.23.14/drivers/i2c/busses/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/i2c/busses/Kconfig
-+++ linux-2.6.23.14/drivers/i2c/busses/Kconfig
-@@ -125,6 +125,17 @@ config I2C_GPIO
- 	  This is a very simple bitbanging I2C driver utilizing the
- 	  arch-neutral GPIO API to control the SCL and SDA lines.
- 
-+config I2C_GPIO_CUSTOM
-+	tristate "Custom GPIO-based I2C driver"
-+	depends on GENERIC_GPIO
-+	select I2C_GPIO
-+	help
-+	  This is an I2C driver to register 1 to 4 custom I2C buses using 
-+	  GPIO lines.
-+
-+	  This support is also available as a module.  If so, the module
-+	  will be called i2c-gpio-custom.
-+
- config I2C_HYDRA
- 	tristate "CHRP Apple Hydra Mac I/O I2C interface"
- 	depends on PCI && PPC_CHRP && EXPERIMENTAL
-Index: linux-2.6.23.14/drivers/i2c/busses/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/i2c/busses/Makefile
-+++ linux-2.6.23.14/drivers/i2c/busses/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
- obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
- obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
- obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
-+obj-$(CONFIG_I2C_GPIO_CUSTOM)	+= i2c-gpio-custom.o
- obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
- obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
- obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
diff --git a/target/linux/adm5120/patches-2.6.23/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.23/310-adm5120_wdt.patch
deleted file mode 100644
index 202e91709f..0000000000
--- a/target/linux/adm5120/patches-2.6.23/310-adm5120_wdt.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-Index: linux-2.6.23.14/drivers/char/watchdog/Kconfig
-===================================================================
---- linux-2.6.23.14.orig/drivers/char/watchdog/Kconfig
-+++ linux-2.6.23.14/drivers/char/watchdog/Kconfig
-@@ -583,6 +583,18 @@ config SBC_EPX_C3_WATCHDOG
- 
- # MIPS Architecture
- 
-+config ADM5120_WDT
-+	tristate "Infineon ADM5120 SoC hardware watchdog"
-+	depends on WATCHDOG && MIPS_ADM5120
-+	help
-+	  This is a driver for hardware watchdog integrated in Infineon
-+	  ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+	  it doesn't freeze, and if it does, it reboots your computer after a
-+	  certain amount of time.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called adm5120_wdt.
-+
- config INDYDOG
- 	tristate "Indy/I2 Hardware Watchdog"
- 	depends on SGI_IP22
-Index: linux-2.6.23.14/drivers/char/watchdog/Makefile
-===================================================================
---- linux-2.6.23.14.orig/drivers/char/watchdog/Makefile
-+++ linux-2.6.23.14/drivers/char/watchdog/Makefile
-@@ -87,6 +87,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
- # M68KNOMMU Architecture
- 
- # MIPS Architecture
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1)	+= mtx-1_wdt.o
- obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
diff --git a/target/linux/adm5120/patches-2.6.24/004-adm5120_nand.patch b/target/linux/adm5120/patches-2.6.24/004-adm5120_nand.patch
deleted file mode 100644
index 89239d7348..0000000000
--- a/target/linux/adm5120/patches-2.6.24/004-adm5120_nand.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-Index: linux-2.6.24/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.24/drivers/mtd/nand/Kconfig
-@@ -81,6 +81,16 @@ config MTD_NAND_TS7250
- 	help
- 	  Support for NAND flash on Technologic Systems TS-7250 platform.
- 
-+config MTD_NAND_ADM5120
-+	tristate "ADM5120 NAND support"
-+	depends on MTD_NAND && MIPS_ADM5120
-+	help
-+	  This enables the driver for the ADM5120 SoC built-in
-+	  NAND flash interface.
-+
-+	  No board specific support is done by this driver, each board
-+	  must advertise a platform_device for the driver to attach.
-+
- config MTD_NAND_IDS
- 	tristate
- 
-Index: linux-2.6.24/drivers/mtd/nand/Makefile
-===================================================================
---- linux-2.6.24.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.24/drivers/mtd/nand/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nan
- obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
- obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
- obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
-+obj-$(CONFIG_MTD_NAND_ADM5120)		+= adm5120-nand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
diff --git a/target/linux/adm5120/patches-2.6.24/008-adm5120_uart.patch b/target/linux/adm5120/patches-2.6.24/008-adm5120_uart.patch
deleted file mode 100644
index c08239a39c..0000000000
--- a/target/linux/adm5120/patches-2.6.24/008-adm5120_uart.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-Index: linux-2.6.24/drivers/serial/Makefile
-===================================================================
---- linux-2.6.24.orig/drivers/serial/Makefile
-+++ linux-2.6.24/drivers/serial/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
- obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
-+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
- obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
- obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
- obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.24/include/linux/serial_core.h
-===================================================================
---- linux-2.6.24.orig/include/linux/serial_core.h
-+++ linux-2.6.24/include/linux/serial_core.h
-@@ -150,6 +150,9 @@
- #define PORT_MCF	78
- 
- 
-+/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120	77
-+
- #ifdef __KERNEL__
- 
- #include <linux/compiler.h>
-Index: linux-2.6.24/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/serial/Kconfig
-+++ linux-2.6.24/drivers/serial/Kconfig
-@@ -280,6 +280,22 @@ config SERIAL_8250_RM9K
- 
- comment "Non-8250 serial port support"
- 
-+config SERIAL_ADM5120
-+       bool "ADM5120 serial port support"
-+       depends on MIPS_ADM5120
-+       select SERIAL_CORE
-+       select SERIAL_CORE_CONSOLE
-+       help
-+         Driver for the on chip UARTs on the ADM5120 SoC
-+
-+config ADM5120_NR_UARTS
-+       int "Maximum number of ADM5120 serial ports"
-+       depends on SERIAL_ADM5120
-+       default "2"
-+       ---help---
-+         Set this to the number of serial ports you want the driver to
-+         support.
-+
- config SERIAL_AMBA_PL010
- 	tristate "ARM AMBA PL010 serial port support"
- 	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff --git a/target/linux/adm5120/patches-2.6.24/900-adm5120_switch_napi.patch b/target/linux/adm5120/patches-2.6.24/900-adm5120_switch_napi.patch
deleted file mode 100644
index 5c757a10b4..0000000000
--- a/target/linux/adm5120/patches-2.6.24/900-adm5120_switch_napi.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-Index: linux-2.6.24/drivers/net/adm5120sw.c
-===================================================================
---- linux-2.6.24.orig/drivers/net/adm5120sw.c
-+++ linux-2.6.24/drivers/net/adm5120sw.c
-@@ -93,8 +93,14 @@
- /* ------------------------------------------------------------------------ */
- 
- struct adm5120_if_priv {
-+	struct net_device *dev;
-+
- 	unsigned int	vlan_no;
- 	unsigned int	port_mask;
-+
-+#ifdef CONFIG_ADM5120_SWITCH_NAPI
-+	struct napi_struct napi;
-+#endif
- };
- 
- struct dma_desc {
-@@ -333,7 +339,6 @@ static void sw_dump_regs(void)
- 	SW_DBG("rlda: %08X\n", t);
- }
- 
--
- /* ------------------------------------------------------------------------ */
- 
- static inline void adm5120_rx_dma_update(struct dma_desc *desc,
-@@ -495,9 +500,11 @@ static void adm5120_switch_tx(void)
- }
- 
- #ifdef CONFIG_ADM5120_SWITCH_NAPI
--static int adm5120_if_poll(struct net_device *dev, int *budget)
-+static int adm5120_if_poll(struct napi_struct *napi, int limit)
- {
--	int limit = min(dev->quota, *budget);
-+	struct adm5120_if_priv *priv = container_of(napi,
-+				struct adm5120_if_priv, napi);
-+	struct net_device *dev = priv->dev;
- 	int done;
- 	u32 status;
- 
-@@ -509,13 +516,10 @@ static int adm5120_if_poll(struct net_de
- 	SW_DBG("%s: processing RX ring\n", dev->name);
- 	done = adm5120_switch_rx(limit);
- 
--	*budget -= done;
--	dev->quota -= done;
--
- 	status = sw_int_status() & SWITCH_INTS_POLL;
- 	if ((done < limit) && (!status)) {
- 		SW_DBG("disable polling mode for %s\n", dev->name);
--		netif_rx_complete(dev);
-+		netif_rx_complete(dev, napi);
- 		sw_int_unmask(SWITCH_INTS_POLL);
- 		return 0;
- 	}
-@@ -541,10 +545,12 @@ static irqreturn_t adm5120_switch_irq(in
- 
- 	if (status & SWITCH_INTS_POLL) {
- 		struct net_device *dev = dev_id;
-+		struct adm5120_if_priv *priv = netdev_priv(dev);
-+
- 		sw_dump_intr_mask("poll ints", status);
- 		SW_DBG("enable polling mode for %s\n", dev->name);
- 		sw_int_mask(SWITCH_INTS_POLL);
--		netif_rx_schedule(dev);
-+		netif_rx_schedule(dev, &priv->napi);
- 	}
- #else
- 	sw_int_ack(status);
-@@ -779,12 +785,31 @@ static void adm5120_switch_set_vlan_port
- 
- /* ------------------------------------------------------------------------ */
- 
-+#ifdef CONFIG_ADM5120_SWITCH_NAPI
-+static inline void adm5120_if_napi_enable(struct net_device *dev)
-+{
-+	struct adm5120_if_priv *priv = netdev_priv(dev);
-+	napi_enable(&priv->napi);
-+}
-+
-+static inline void adm5120_if_napi_disable(struct net_device *dev)
-+{
-+	struct adm5120_if_priv *priv = netdev_priv(dev);
-+	napi_disable(&priv->napi);
-+}
-+#else
-+static inline void adm5120_if_napi_enable(struct net_device *dev) {}
-+static inline void adm5120_if_napi_disable(struct net_device *dev) {}
-+#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-+
- static int adm5120_if_open(struct net_device *dev)
- {
- 	u32 t;
- 	int err;
- 	int i;
- 
-+	adm5120_if_napi_enable(dev);
-+
- 	err = request_irq(dev->irq, adm5120_switch_irq,
- 		(IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
- 	if (err) {
-@@ -809,6 +834,7 @@ static int adm5120_if_open(struct net_de
- 	return 0;
- 
- err:
-+	adm5120_if_napi_disable(dev);
- 	return err;
- }
- 
-@@ -818,6 +844,7 @@ static int adm5120_if_stop(struct net_de
- 	int i;
- 
- 	netif_stop_queue(dev);
-+	adm5120_if_napi_disable(dev);
- 
- 	/* disable port if not assigned to other devices */
- 	t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-@@ -1001,6 +1028,9 @@ static struct net_device *adm5120_if_all
- 	if (!dev)
- 		return NULL;
- 
-+	priv = netdev_priv(dev);
-+	priv->dev = dev;
-+
- 	dev->irq		= ADM5120_IRQ_SWITCH;
- 	dev->open		= adm5120_if_open;
- 	dev->hard_start_xmit 	= adm5120_if_hard_start_xmit;
-@@ -1010,13 +1040,11 @@ static struct net_device *adm5120_if_all
- 	dev->tx_timeout		= adm5120_if_tx_timeout;
- 	dev->watchdog_timeo 	= TX_TIMEOUT;
- 	dev->set_mac_address 	= adm5120_if_set_mac_address;
-+
- #ifdef CONFIG_ADM5120_SWITCH_NAPI
--	dev->poll		= adm5120_if_poll;
--	dev->weight		= 64;
-+	netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
- #endif
- 
--	SET_MODULE_OWNER(dev);
--
- 	return dev;
- }
- 
diff --git a/target/linux/adm5120/patches-2.6.24/910-usb_manage_endpoint_queues.patch b/target/linux/adm5120/patches-2.6.24/910-usb_manage_endpoint_queues.patch
deleted file mode 100644
index 46b61d6377..0000000000
--- a/target/linux/adm5120/patches-2.6.24/910-usb_manage_endpoint_queues.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-Index: linux-2.6.24/drivers/usb/host/adm5120-hcd.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-hcd.c
-@@ -83,8 +83,8 @@ static void admhc_stop(struct usb_hcd *h
- /*
-  * queue up an urb for anything except the root hub
-  */
--static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
--	struct urb *urb, gfp_t mem_flags)
-+static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
-+		gfp_t mem_flags)
- {
- 	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
- 	struct ed	*ed;
-@@ -101,7 +101,7 @@ static int admhc_urb_enqueue(struct usb_
- #endif
- 
- 	/* every endpoint has an ed, locate and maybe (re)initialize it */
--	ed = ed_get(ahcd, ep, urb->dev, pipe, urb->interval);
-+	ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
- 	if (!ed)
- 		return -ENOMEM;
- 
-@@ -161,22 +161,17 @@ static int admhc_urb_enqueue(struct usb_
- 		goto fail;
- 	}
- 
--	/* in case of unlink-during-submit */
--	spin_lock(&urb->lock);
--	if (urb->status != -EINPROGRESS) {
--		spin_unlock(&urb->lock);
--		urb->hcpriv = urb_priv;
--		finish_urb(ahcd, urb);
--		ret = 0;
-+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
-+	if (ret)
- 		goto fail;
--	}
- 
- 	/* schedule the ed if needed */
- 	if (ed->state == ED_IDLE) {
- 		ret = ed_schedule(ahcd, ed);
--		if (ret < 0)
--			goto fail0;
--
-+		if (ret < 0) {
-+			usb_hcd_unlink_urb_from_ep(hcd, urb);
-+			goto fail;
-+		}
- 		if (ed->type == PIPE_ISOCHRONOUS) {
- 			u16	frame = admhc_frame_no(ahcd);
- 
-@@ -204,8 +199,6 @@ static int admhc_urb_enqueue(struct usb_
- 	admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
- #endif
- 
--fail0:
--	spin_unlock(&urb->lock);
- fail:
- 	if (ret)
- 		urb_priv_free(ahcd, urb_priv);
-@@ -220,18 +213,23 @@ fail:
-  * asynchronously, and we might be dealing with an urb that's
-  * partially transferred, or an ED with other urbs being unlinked.
-  */
--static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
-+static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
-+		int status)
- {
- 	struct admhcd *ahcd = hcd_to_admhcd(hcd);
- 	unsigned long flags;
-+	int ret;
- 
- 	spin_lock_irqsave(&ahcd->lock, flags);
- 
- #ifdef ADMHC_VERBOSE_DEBUG
- 	urb_print(ahcd, urb, "DEQUEUE", 1);
- #endif
--
--	if (HC_IS_RUNNING(hcd->state)) {
-+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
-+	if (ret) {
-+		/* Do nothing */
-+		;
-+	} else if (HC_IS_RUNNING(hcd->state)) {
- 		struct urb_priv *urb_priv;
- 
- 		/* Unless an IRQ completed the unlink while it was being
-@@ -253,7 +251,7 @@ static int admhc_urb_dequeue(struct usb_
- 	}
- 	spin_unlock_irqrestore(&ahcd->lock, flags);
- 
--	return 0;
-+	return ret;
- }
- 
- /*-------------------------------------------------------------------------*/
-Index: linux-2.6.24/drivers/usb/host/adm5120-q.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-q.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-q.c
-@@ -63,6 +63,7 @@ __acquires(ahcd->lock)
- #endif
- 
- 	/* urb->complete() can reenter this HCD */
-+	usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
- 	spin_unlock(&ahcd->lock);
- 	usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb);
- 	spin_lock(&ahcd->lock);
diff --git a/target/linux/adm5120/patches-2.6.24/911-usb_centralize_eremoteio_handling.patch b/target/linux/adm5120/patches-2.6.24/911-usb_centralize_eremoteio_handling.patch
deleted file mode 100644
index b4e0fb089f..0000000000
--- a/target/linux/adm5120/patches-2.6.24/911-usb_centralize_eremoteio_handling.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-Index: linux-2.6.24/drivers/usb/host/adm5120-q.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-q.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-q.c
-@@ -28,25 +28,10 @@ __releases(ahcd->lock)
- __acquires(ahcd->lock)
- {
- 	urb_priv_free(ahcd, urb->hcpriv);
--	urb->hcpriv = NULL;
- 
- 	spin_lock(&urb->lock);
- 	if (likely(urb->status == -EINPROGRESS))
- 		urb->status = 0;
--
--	/* report short control reads right even though the data TD always
--	 * has TD_R set.  (much simpler, but creates the 1-td limit.)
--	 */
--	if (unlikely(urb->transfer_flags & URB_SHORT_NOT_OK)
--			&& unlikely(usb_pipecontrol(urb->pipe))
--			&& urb->actual_length < urb->transfer_buffer_length
--			&& usb_pipein(urb->pipe)
--			&& urb->status == 0) {
--		urb->status = -EREMOTEIO;
--#ifdef ADMHC_VERBOSE_DEBUG
--		urb_print(ahcd, urb, "SHORT", usb_pipeout(urb->pipe));
--#endif
--	}
- 	spin_unlock(&urb->lock);
- 
- 	switch (usb_pipetype(urb->pipe)) {
diff --git a/target/linux/adm5120/patches-2.6.24/912-usb_use_urb_unlinked_field.patch b/target/linux/adm5120/patches-2.6.24/912-usb_use_urb_unlinked_field.patch
deleted file mode 100644
index a2af8cad72..0000000000
--- a/target/linux/adm5120/patches-2.6.24/912-usb_use_urb_unlinked_field.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-Index: linux-2.6.24/drivers/usb/host/adm5120-q.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-q.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-q.c
-@@ -616,8 +616,7 @@ static int td_done(struct admhcd *ahcd, 
- 
- 		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) {
- 			spin_lock(&urb->lock);
--			if (urb->status == -EINPROGRESS)
--				urb->status = cc_to_error[cc];
-+			urb->status = cc_to_error[cc];
- 			spin_unlock(&urb->lock);
- 		}
- 
-@@ -787,7 +786,7 @@ rescan_this:
- 			urb = td->urb;
- 			urb_priv = td->urb->hcpriv;
- 
--			if (urb->status == -EINPROGRESS) {
-+			if (!urb->unlinked) {
- 				prev = &td->hwNextTD;
- 				continue;
- 			}
diff --git a/target/linux/adm5120/patches-2.6.24/913-usb_avoid_donelist_after_an_error.patch b/target/linux/adm5120/patches-2.6.24/913-usb_avoid_donelist_after_an_error.patch
deleted file mode 100644
index c6d7d6008b..0000000000
--- a/target/linux/adm5120/patches-2.6.24/913-usb_avoid_donelist_after_an_error.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-Index: linux-2.6.24/drivers/usb/host/adm5120-q.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-q.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-q.c
-@@ -641,10 +641,11 @@ static int td_done(struct admhcd *ahcd, 
- 
- /*-------------------------------------------------------------------------*/
- 
--static inline struct td *
-+static inline void
- ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
- {
- 	struct urb		*urb = td->urb;
-+	struct urb_priv		*urb_priv = urb->hcpriv;
- 	struct ed		*ed = td->ed;
- 	struct list_head	*tmp = td->td_list.next;
- 	__hc32			toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-@@ -657,13 +658,12 @@ ed_halted(struct admhcd *ahcd, struct td
- 	wmb();
- 	ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
- 
--	/* put any later tds from this urb onto the donelist, after 'td',
--	 * order won't matter here: no errors, and nothing was transferred.
--	 * also patch the ed so it looks as if those tds completed normally.
-+	/* Get rid of all later tds from this urb. We don't have
-+	 * to be careful: no errors and nothing was transferred.
-+	 * Also patch the ed so it looks as if those tds completed normally.
- 	 */
- 	while (tmp != &ed->td_list) {
- 		struct td	*next;
--		__hc32		info;
- 
- 		next = list_entry(tmp, struct td, td_list);
- 		tmp = next->td_list.next;
-@@ -678,16 +678,8 @@ ed_halted(struct admhcd *ahcd, struct td
- 		 * then we need to leave the control STATUS packet queued
- 		 * and clear ED_SKIP.
- 		 */
--		info = next->hwINFO;
--#if 0		/* FIXME */
--		info |= cpu_to_hc32(ahcd, TD_DONE);
--#endif
--		info &= ~cpu_to_hc32(ahcd, TD_CC);
--		next->hwINFO = info;
--
--		next->next_dl_td = rev;
--		rev = next;
--
-+		list_del(&next->td_list);
-+		urb_priv->td_cnt++;
- 		ed->hwHeadP = next->hwNextTD | toggle;
- 	}
- 
-@@ -713,8 +705,6 @@ ed_halted(struct admhcd *ahcd, struct td
- 			hc32_to_cpu(ahcd, td->hwINFO),
- 			cc, cc_to_error [cc]);
- 	}
--
--	return rev;
- }
- 
- /*-------------------------------------------------------------------------*/
diff --git a/target/linux/adm5120/patches-2.6.24/914-usb_reorganize_urb_status_use.patch b/target/linux/adm5120/patches-2.6.24/914-usb_reorganize_urb_status_use.patch
deleted file mode 100644
index 79a53d8012..0000000000
--- a/target/linux/adm5120/patches-2.6.24/914-usb_reorganize_urb_status_use.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-Index: linux-2.6.24/drivers/usb/host/adm5120-dbg.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-dbg.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-dbg.c
-@@ -82,7 +82,7 @@ static inline char *td_togglestring(u32 
-  * small: 0) header + data packets 1) just header
-  */
- static void __attribute__((unused))
--urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small)
-+urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status)
- {
- 	unsigned int pipe = urb->pipe;
- 
-@@ -92,7 +92,7 @@ urb_print(struct admhcd *ahcd, struct ur
- 	}
- 
- #ifndef	ADMHC_VERBOSE_DEBUG
--	if (urb->status != 0)
-+	if (status != 0)
- #endif
- 	admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d "
- 			"stat=%d\n",
-@@ -105,7 +105,7 @@ urb_print(struct admhcd *ahcd, struct ur
- 			urb->transfer_flags,
- 			urb->actual_length,
- 			urb->transfer_buffer_length,
--			urb->status);
-+			status);
- 
- #ifdef	ADMHC_VERBOSE_DEBUG
- 	if (!small) {
-@@ -125,7 +125,7 @@ urb_print(struct admhcd *ahcd, struct ur
- 						urb->transfer_buffer_length: urb->actual_length;
- 			for (i = 0; i < 16 && i < len; i++)
- 				printk(" %02x", ((__u8 *)urb->transfer_buffer)[i]);
--			printk("%s stat:%d\n", i < len? "...": "", urb->status);
-+			printk("%s stat:%d\n", i < len? "...": "", status);
- 		}
- 	}
- #endif /* ADMHC_VERBOSE_DEBUG */
-Index: linux-2.6.24/drivers/usb/host/adm5120-hcd.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-hcd.c
-@@ -96,7 +96,7 @@ static int admhc_urb_enqueue(struct usb_
- 
- #ifdef ADMHC_VERBOSE_DEBUG
- 	spin_lock_irqsave(&ahcd->lock, flags);
--	urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe));
-+	urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
- 	spin_unlock_irqrestore(&ahcd->lock, flags);
- #endif
- 
-@@ -208,8 +208,8 @@ fail:
- }
- 
- /*
-- * decouple the URB from the HC queues (TDs, urb_priv); it's
-- * already marked using urb->status.  reporting is always done
-+ * decouple the URB from the HC queues (TDs, urb_priv);
-+ * reporting is always done
-  * asynchronously, and we might be dealing with an urb that's
-  * partially transferred, or an ED with other urbs being unlinked.
-  */
-@@ -223,7 +223,7 @@ static int admhc_urb_dequeue(struct usb_
- 	spin_lock_irqsave(&ahcd->lock, flags);
- 
- #ifdef ADMHC_VERBOSE_DEBUG
--	urb_print(ahcd, urb, "DEQUEUE", 1);
-+	urb_print(ahcd, urb, "DEQUEUE", 1, status);
- #endif
- 	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
- 	if (ret) {
-@@ -247,7 +247,7 @@ static int admhc_urb_dequeue(struct usb_
- 		 * any more ... just clean up every urb's memory.
- 		 */
- 		if (urb->hcpriv)
--			finish_urb(ahcd, urb);
-+			finish_urb(ahcd, urb, status);
- 	}
- 	spin_unlock_irqrestore(&ahcd->lock, flags);
- 
-Index: linux-2.6.24/drivers/usb/host/adm5120-pm.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-pm.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-pm.c
-@@ -383,9 +383,8 @@ static int admhc_restart(struct admhcd *
- 					ed, ed->state);
- 		}
- 
--		spin_lock(&urb->lock);
--		urb->status = -ESHUTDOWN;
--		spin_unlock(&urb->lock);
-+		if (!urb->unlinked)
-+			urb->unlinked = -ESHUTDOWN;
- 	}
- 	finish_unlinks(ahcd, 0);
- 	spin_unlock_irq(&ahcd->lock);
-Index: linux-2.6.24/drivers/usb/host/adm5120-q.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-q.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-q.c
-@@ -23,16 +23,14 @@
-  * PRECONDITION:  ahcd lock held, irqs blocked.
-  */
- static void
--finish_urb(struct admhcd *ahcd, struct urb *urb)
-+finish_urb(struct admhcd *ahcd, struct urb *urb, int status)
- __releases(ahcd->lock)
- __acquires(ahcd->lock)
- {
- 	urb_priv_free(ahcd, urb->hcpriv);
- 
--	spin_lock(&urb->lock);
--	if (likely(urb->status == -EINPROGRESS))
--		urb->status = 0;
--	spin_unlock(&urb->lock);
-+	if (likely(status == -EINPROGRESS))
-+		status = 0;
- 
- 	switch (usb_pipetype(urb->pipe)) {
- 	case PIPE_ISOCHRONOUS:
-@@ -44,12 +42,13 @@ __acquires(ahcd->lock)
- 	}
- 
- #ifdef ADMHC_VERBOSE_DEBUG
--	urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe));
-+	urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe), status);
- #endif
- 
- 	/* urb->complete() can reenter this HCD */
- 	usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
- 	spin_unlock(&ahcd->lock);
-+	urb->status = status;
- 	usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb);
- 	spin_lock(&ahcd->lock);
- }
-@@ -557,9 +556,7 @@ static void td_submit_urb(struct admhcd 
-  * Done List handling functions
-  *-------------------------------------------------------------------------*/
- 
--/* calculate transfer length/status and update the urb
-- * PRECONDITION:  irqsafe (only for urb->status locking)
-- */
-+/* calculate transfer length/status and update the urb */
- static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
- {
- 	struct urb_priv *urb_priv = urb->hcpriv;
-@@ -568,6 +565,7 @@ static int td_done(struct admhcd *ahcd, 
- 	u32	tdDBP;
- 	int	type = usb_pipetype(urb->pipe);
- 	int	cc;
-+	int	status = -EINPROGRESS;
- 
- 	info = hc32_to_cpup(ahcd, &td->hwINFO);
- 	tdDBP = hc32_to_cpup(ahcd, &td->hwDBP);
-@@ -582,10 +580,9 @@ static int td_done(struct admhcd *ahcd, 
- 		/* NOTE:  assumes FC in tdINFO == 0, and that
- 		 * only the first of 0..MAXPSW psws is used.
- 		 */
--#if 0
--		if (tdINFO & TD_CC)	/* hc didn't touch? */
--			return;
--#endif
-+		if (info & TD_CC)	/* hc didn't touch? */
-+			return status;
-+
- 		if (usb_pipeout(urb->pipe))
- 			dlen = urb->iso_frame_desc[td->index].length;
- 		else {
-@@ -614,11 +611,9 @@ static int td_done(struct admhcd *ahcd, 
- 				&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
- 			cc = TD_CC_NOERROR;
- 
--		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) {
--			spin_lock(&urb->lock);
--			urb->status = cc_to_error[cc];
--			spin_unlock(&urb->lock);
--		}
-+		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
-+			status = cc_to_error[cc];
-+
- 
- 		/* count all non-empty packets except control SETUP packet */
- 		if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) {
-@@ -636,7 +631,7 @@ static int td_done(struct admhcd *ahcd, 
- 	list_del(&td->td_list);
- 	urb_priv->td_idx++;
- 
--	return cc;
-+	return status;
- }
- 
- /*-------------------------------------------------------------------------*/
-@@ -771,6 +766,7 @@ rescan_this:
- 			struct urb	*urb;
- 			struct urb_priv	*urb_priv;
- 			__hc32		savebits;
-+			int		status;
- 
- 			td = list_entry(entry, struct td, td_list);
- 			urb = td->urb;
-@@ -792,12 +788,12 @@ rescan_this:
- #ifdef ADMHC_VERBOSE_DEBUG
- 			urb_print(ahcd, urb, "PARTIAL", 0);
- #endif
--			td_done(ahcd, urb, td);
-+			status = td_done(ahcd, urb, td);
- 
- 			/* if URB is done, clean up */
- 			if (urb_priv->td_idx == urb_priv->td_cnt) {
- 				modified = completed = 1;
--				finish_urb(ahcd, urb);
-+				finish_urb(ahcd, urb, status);
- 			}
- 		}
- 		if (completed && !list_empty(&ed->td_list))
-@@ -895,13 +891,13 @@ static void ed_update(struct admhcd *ahc
- 		struct td *td = list_entry(entry, struct td, td_list);
- 		struct urb *urb = td->urb;
- 		struct urb_priv *urb_priv = urb->hcpriv;
--		int cc;
-+		int status;
- 
- 		if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
- 			break;
- 
- 		/* update URB's length and status from TD */
--		cc = td_done(ahcd, urb, td);
-+		status = td_done(ahcd, urb, td);
- 		if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td))
- 			ed_unhalt(ahcd, ed, urb);
- 
-@@ -910,7 +906,7 @@ static void ed_update(struct admhcd *ahc
- 
- 		/* If all this urb's TDs are done, call complete() */
- 		if (urb_priv->td_idx == urb_priv->td_cnt)
--			finish_urb(ahcd, urb);
-+			finish_urb(ahcd, urb, status);
- 
- 		/* clean schedule:  unlink EDs that are no longer busy */
- 		if (list_empty(&ed->td_list)) {
diff --git a/target/linux/adm5120/patches-2.6.24/915-usb_eliminate_urb_status.patch b/target/linux/adm5120/patches-2.6.24/915-usb_eliminate_urb_status.patch
deleted file mode 100644
index 291b1ade55..0000000000
--- a/target/linux/adm5120/patches-2.6.24/915-usb_eliminate_urb_status.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-Index: linux-2.6.24/drivers/usb/host/adm5120-q.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-q.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-q.c
-@@ -48,8 +48,7 @@ __acquires(ahcd->lock)
- 	/* urb->complete() can reenter this HCD */
- 	usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
- 	spin_unlock(&ahcd->lock);
--	urb->status = status;
--	usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb);
-+	usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status);
- 	spin_lock(&ahcd->lock);
- }
- 
diff --git a/target/linux/adm5120/patches-2.6.24/916-usb_bump_version_number.patch b/target/linux/adm5120/patches-2.6.24/916-usb_bump_version_number.patch
deleted file mode 100644
index 312c1f322a..0000000000
--- a/target/linux/adm5120/patches-2.6.24/916-usb_bump_version_number.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.24/drivers/usb/host/adm5120-hcd.c
-===================================================================
---- linux-2.6.24.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.24/drivers/usb/host/adm5120-hcd.c
-@@ -45,7 +45,7 @@
- #include "../core/hcd.h"
- #include "../core/hub.h"
- 
--#define DRIVER_VERSION	"0.16.3"
-+#define DRIVER_VERSION	"0.24.0"
- #define DRIVER_AUTHOR	"Gabor Juhos <juhosg at openwrt.org>"
- #define DRIVER_DESC	"ADMtek USB 1.1 Host Controller Driver"
- 
diff --git a/target/linux/adm5120/patches-2.6.24/001-adm5120.patch b/target/linux/adm5120/patches/001-adm5120.patch
index 7ff58add9c..1deda1a083 100644
--- a/target/linux/adm5120/patches-2.6.24/001-adm5120.patch
+++ b/target/linux/adm5120/patches/001-adm5120.patch
@@ -23,7 +23,7 @@ Index: linux-2.6.24/arch/mips/Kconfig
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -689,6 +701,7 @@ config WR_PPMC
+@@ -689,6 +703,7 @@ config WR_PPMC
  
  endchoice
  
diff --git a/target/linux/adm5120/patches-2.6.24/002-adm5120_flash.patch b/target/linux/adm5120/patches/002-adm5120_flash.patch
index a1eea9f0da..a1eea9f0da 100644
--- a/target/linux/adm5120/patches-2.6.24/002-adm5120_flash.patch
+++ b/target/linux/adm5120/patches/002-adm5120_flash.patch
diff --git a/target/linux/adm5120/patches-2.6.24/003-adm5120_switch.patch b/target/linux/adm5120/patches/003-adm5120_switch.patch
index 6a14c2b376..6a14c2b376 100644
--- a/target/linux/adm5120/patches-2.6.24/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches/003-adm5120_switch.patch
diff --git a/target/linux/adm5120/patches-2.6.24/005-adm5120_usb.patch b/target/linux/adm5120/patches/005-adm5120_usb.patch
index a2e43b4f66..a2e43b4f66 100644
--- a/target/linux/adm5120/patches-2.6.24/005-adm5120_usb.patch
+++ b/target/linux/adm5120/patches/005-adm5120_usb.patch
diff --git a/target/linux/adm5120/patches-2.6.24/006-adm5120_leds.patch b/target/linux/adm5120/patches/006-adm5120_leds.patch
index a055b3560f..a055b3560f 100644
--- a/target/linux/adm5120/patches-2.6.24/006-adm5120_leds.patch
+++ b/target/linux/adm5120/patches/006-adm5120_leds.patch
diff --git a/target/linux/adm5120/patches-2.6.24/007-adm5120_pci.patch b/target/linux/adm5120/patches/007-adm5120_pci.patch
index bce0c814b9..bce0c814b9 100644
--- a/target/linux/adm5120/patches-2.6.24/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches/007-adm5120_pci.patch
diff --git a/target/linux/adm5120/patches-2.6.24/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
index 60b78ebf73..60b78ebf73 100644
--- a/target/linux/adm5120/patches-2.6.24/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
diff --git a/target/linux/adm5120/patches-2.6.24/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
index 519b1c2392..519b1c2392 100644
--- a/target/linux/adm5120/patches-2.6.24/100-mtd_myloder_partition_parser.patch
+++ b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
diff --git a/target/linux/adm5120/patches-2.6.24/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
index 19c87a90bf..19c87a90bf 100644
--- a/target/linux/adm5120/patches-2.6.24/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
diff --git a/target/linux/adm5120/patches-2.6.24/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
index 772c92f79f..772c92f79f 100644
--- a/target/linux/adm5120/patches-2.6.24/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
diff --git a/target/linux/adm5120/patches-2.6.24/103-mtd_trxsplit.patch b/target/linux/adm5120/patches/103-mtd_trxsplit.patch
index c709123428..c709123428 100644
--- a/target/linux/adm5120/patches-2.6.24/103-mtd_trxsplit.patch
+++ b/target/linux/adm5120/patches/103-mtd_trxsplit.patch
diff --git a/target/linux/adm5120/patches-2.6.24/120-rb153_cf_driver.patch b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
index e382871871..e382871871 100644
--- a/target/linux/adm5120/patches-2.6.24/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
diff --git a/target/linux/adm5120/patches-2.6.24/140-cmdline_hack.patch b/target/linux/adm5120/patches/140-cmdline_hack.patch
index 58a63ba2a9..58a63ba2a9 100644
--- a/target/linux/adm5120/patches-2.6.24/140-cmdline_hack.patch
+++ b/target/linux/adm5120/patches/140-cmdline_hack.patch
diff --git a/target/linux/adm5120/patches-2.6.24/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
index 22f5083465..22f5083465 100644
--- a/target/linux/adm5120/patches-2.6.24/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
diff --git a/target/linux/adm5120/patches-2.6.24/201-amba_bus_hacks.patch b/target/linux/adm5120/patches/201-amba_bus_hacks.patch
index 0f1c3b2e38..0f1c3b2e38 100644
--- a/target/linux/adm5120/patches-2.6.24/201-amba_bus_hacks.patch
+++ b/target/linux/adm5120/patches/201-amba_bus_hacks.patch
diff --git a/target/linux/adm5120/patches-2.6.24/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
index 2aa86e2b13..2aa86e2b13 100644
--- a/target/linux/adm5120/patches-2.6.24/202-pci_disable_common_quirks.patch
+++ b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
diff --git a/target/linux/adm5120/patches-2.6.24/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
index 37eb0ab5fa..37eb0ab5fa 100644
--- a/target/linux/adm5120/patches-2.6.24/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
diff --git a/target/linux/adm5120/patches-2.6.24/300-i2c_gpio_custom.patch b/target/linux/adm5120/patches/300-i2c_gpio_custom.patch
index d0736f3616..d0736f3616 100644
--- a/target/linux/adm5120/patches-2.6.24/300-i2c_gpio_custom.patch
+++ b/target/linux/adm5120/patches/300-i2c_gpio_custom.patch
diff --git a/target/linux/adm5120/patches-2.6.24/310-adm5120_wdt.patch b/target/linux/adm5120/patches/310-adm5120_wdt.patch
index 2f1ac5387a..2f1ac5387a 100644
--- a/target/linux/adm5120/patches-2.6.24/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches/310-adm5120_wdt.patch
diff --git a/target/linux/adm5120/router_be/config-2.6.23 b/target/linux/adm5120/router_be/config-2.6.23
deleted file mode 100644
index 3ff67e4595..0000000000
--- a/target/linux/adm5120/router_be/config-2.6.23
+++ /dev/null
@@ -1,247 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120_CPU_OVERRIDES=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARM_AMBA=y
-CONFIG_BASE_SMALL=0
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BINFMT_MISC=m
-CONFIG_BITREVERSE=y
-CONFIG_CIFS_DEBUG2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_FS_MBCACHE=m
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_EVDEV is not set
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IRQ_CPU=y
-# CONFIG_JOLIET is not set
-CONFIG_LEDS_ADM5120=m
-# CONFIG_LEDS_ADM5120_DIAG is not set
-# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set
-# CONFIG_LEDS_ALIX is not set
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MII=m
-# CONFIG_MINIX_FS is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_ADM5120=y
-CONFIG_MIPS_ADM5120_ENET=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NETDEV_1000=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI_ADM5120=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_ADM5120 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SND_USB_AUDIO is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_ADM5120_HCD=m
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USER_NS is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_ZD1211RW is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/router_be/config-2.6.24 b/target/linux/adm5120/router_be/config-default
index 6204566d6c..3c57df1e65 100644
--- a/target/linux/adm5120/router_be/config-2.6.24
+++ b/target/linux/adm5120/router_be/config-default
@@ -202,7 +202,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_ADM5120 is not set
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
diff --git a/target/linux/adm5120/router_le/config-2.6.23 b/target/linux/adm5120/router_le/config-2.6.23
deleted file mode 100644
index f84dc99c14..0000000000
--- a/target/linux/adm5120/router_le/config-2.6.23
+++ /dev/null
@@ -1,271 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120_CPU_OVERRIDES=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARM_AMBA=y
-CONFIG_BASE_SMALL=0
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BINFMT_MISC=m
-CONFIG_BITREVERSE=y
-CONFIG_CIFS_DEBUG2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit"
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_FS_MBCACHE=m
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_EVDEV is not set
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IRQ_CPU=y
-# CONFIG_JOLIET is not set
-CONFIG_LEDS_ADM5120=m
-# CONFIG_LEDS_ADM5120_DIAG is not set
-# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set
-# CONFIG_LEDS_ALIX is not set
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MII=m
-# CONFIG_MINIX_FS is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_ADM5120=y
-CONFIG_MIPS_ADM5120_ENET=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_ADM5120 is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_TRXSPLIT=y
-# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI_ADM5120=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_ADM5120 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_USB_ADM5120_HCD=m
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-# CONFIG_USB_CATC is not set
-CONFIG_USB_DEBUG=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USER_NS is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_V4L1=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-# CONFIG_ZD1211RW is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/router_le/config-2.6.24 b/target/linux/adm5120/router_le/config-default
index 096586c2ad..a35ef4aa95 100644
--- a/target/linux/adm5120/router_le/config-2.6.24
+++ b/target/linux/adm5120/router_le/config-default
@@ -166,7 +166,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_MYLOADER_PARTS=y
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_ADM5120 is not set
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
@@ -211,7 +210,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_ADM5120 is not set
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
author	Gabor Juhos <juhosg@openwrt.org>	2008-02-09 10:29:28 +0000
committer	Gabor Juhos <juhosg@openwrt.org>	2008-02-09 10:29:28 +0000
commit	1fd898c4d2c67f89b150c212fcd439728ca97508 (patch)
tree	4f218ef0f6446459af163261d140df7165ab2ba8
parent	b734512859db60d7344c6546e2a3eff2b1dbbdd0 (diff)
download	upstream-1fd898c4d2c67f89b150c212fcd439728ca97508.tar.gz upstream-1fd898c4d2c67f89b150c212fcd439728ca97508.tar.bz2 upstream-1fd898c4d2c67f89b150c212fcd439728ca97508.zip