lantiq: Add device tree for P2812HNUF1 and P2812HNUF3

Add device tree for P2812HNUF1 and P2812HNUF3.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43986 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 472 insertions, 0 deletions

diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts
new file mode 100644
index 0000000000..24ded3e853
--- /dev/null
+++ b/target/linux/lantiq/dts/P2812HNUF1.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+/include/ "P2812HNUFX.dtsi"
+
+/ {
+	model = "P2812HNUF1 - ZyXEL P-2812HNU-F1";
+
+	fpi@10000000 {
+		localbus@0 {
+			nand-parts@0 {
+				compatible = "gen_nand", "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x40000>;
+				};
+				partition@40000 {
+					label = "uboot-env";
+					reg = <0x40000 0x20000>;
+				};
+				partition@60000 {
+					label = "kernel";
+					reg = <0x60000 0x200000>;
+				};
+				partition@260000 {
+					label = "ubi";
+					reg = <0x260000 0x7da0000>;
+				};
+			};
+		};
+		pcie@d900000 {
+			status = "disabled";
+		};
+	};
+
+	ralink_eep {
+		compatible = "ralink,eeprom";
+		ralink,eeprom = "RT3062.eeprom";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		internet_red {				/* red */
+			label = "internet_red";
+			gpios = <&stp 16 1>;
+		};
+		internet_green {
+			label = "internet_green";	/* green */
+			gpios = <&stp 17 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&stp 18 1>;
+		};
+		dsl2 {
+			label = "dsl2";
+			gpios = <&stp 19 1>;
+		};
+		wireless_red {				/* red */
+			label = "wireless_red";
+			gpios = <&stp 20 1>;
+		};
+		wireless_green {			/* green */
+			label = "wireless_green";
+			gpios = <&stp 21 1>;
+		};
+		power {					/* red */
+			label = "power";
+			gpios = <&stp 22 1>;
+		};
+		power2 {				/* green */
+			label = "power2";
+			gpios = <&stp 23 1>;
+		};
+		usb1 {					/* green */
+			label = "usb1";
+			gpios = <&gpio 38 1>;
+		};
+		usb2 {					/* green */
+			label = "usb2";
+			gpios = <&gpio 44 1>;
+		};
+		phone1 {				/* green */
+			label = "phone1";
+			gpios = <&gpio 11 1>;
+		};
+		phone1warn {				/* red */
+			label = "phone1warn";
+			gpios = <&gpio 12 1>;
+		};
+		phone2warn {				/* red */
+			label = "phone2warn";
+			gpios = <&gpio 26 1>;
+		};
+		phone2 {				/* green */
+			label = "phone2";
+			gpios = <&gpio 28 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF3.dts b/target/linux/lantiq/dts/P2812HNUF3.dts
new file mode 100644
index 0000000000..5d25c3c4cb
--- /dev/null
+++ b/target/linux/lantiq/dts/P2812HNUF3.dts
@@ -0,0 +1,109 @@
+/dts-v1/;
+
+/include/ "P2812HNUFX.dtsi"
+
+/ {
+	model = "P2812HNUF3 - ZyXEL P-2812HNU-F3";
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x0 0x50000>;
+					read-only;
+				};
+				partition@50000 {
+					label = "uboot-env";
+					reg = <0x50000 0x10000>;
+				};
+				partition@60000 {
+					label = "unused";
+					reg = <0x60000 0x7a0000>;
+				};
+			};
+
+			nand-parts@0 {
+				compatible = "gen_nand", "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <1 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "kernel";
+					reg = <0x0 0x200000>;
+				};
+				partition@200000 {
+					label = "ubi";
+					reg = <0x200000 0x7e00000>;
+				};
+			};
+		};
+	};
+
+	ralink_eep {
+		compatible = "ralink,eeprom";
+		ralink,eeprom = "RT3092.eeprom";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		internet2 {
+			label = "internet2";
+			gpios = <&stp 16 1>;
+		};
+		internet {
+			label = "internet";
+			gpios = <&stp 17 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&stp 18 1>;
+		};
+		dsl2 {
+			label = "dsl2";
+			gpios = <&stp 19 1>;
+		};
+		wireless_red {
+			label = "wireless_red";
+			gpios = <&stp 20 1>;
+		};
+		wireless_green {
+			label = "wireless_green";
+			gpios = <&stp 21 1>;
+		};
+		power2 {
+			label = "power2";
+			gpios = <&stp 22 1>;
+		};
+		power {
+			label = "power";
+			gpios = <&stp 23 1>;
+		};
+		phone1 {
+			label = "phone1";
+			gpios = <&gpio 11 1>;
+		};
+		phone1warn {
+			label = "phone1warn";
+			gpios = <&gpio 12 1>;
+		};
+		phone2 {
+			label = "phone2";
+			gpios = <&gpio 28 1>;
+		};
+		phone2warn {
+			label = "phone2warn";
+			gpios = <&gpio 26 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUFX.dtsi b/target/linux/lantiq/dts/P2812HNUFX.dtsi
new file mode 100644
index 0000000000..e571eb64f6
--- /dev/null
+++ b/target/linux/lantiq/dts/P2812HNUFX.dtsi
@@ -0,0 +1,257 @@
+/include/ "vr9.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+        fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xr9";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+			
+			interrupt-parent = <&icu0>;
+			interrupts = <166 135 66 40 41 42 38>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				exin3 {
+					lantiq,groups = "exin3";
+					lantiq,function = "exin";
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led1", "gphy1 led1",
+							"gphy0 led2", "gphy1 led2";
+					lantiq,function = "gphy";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pci-in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <2>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				ifxhcd-rst {
+					lantiq,pins = "io33";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				nand_out {
+					lantiq,groups = "nand cle", "nand ale";
+					lantiq,function = "ebu";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				nand_cs1 {
+					lantiq,groups = "nand cs1";
+					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		eth@E108000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "lantiq,xrx200-net";
+			reg = < 0xE108000 0x3000	/* switch */
+				0xE10B100 0x70		/* mdio */
+				0xE10B1D8 0x30		/* mii */
+				0xE10B308 0x30 >;	/* pmac */
+			interrupt-parent = <&icu0>;
+			interrupts = <73 72>;
+
+			lan: interface@0 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				mac-address = [ 00 11 22 33 44 55 ];
+				lantiq,switch;
+
+				ethernet@0 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <0>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy0>;
+				};
+				ethernet@1 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <1>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy1>;
+				};
+				ethernet@2 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <2>;
+					phy-mode = "gmii";
+					phy-handle = <&phy11>;
+				};
+				ethernet@4 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <4>;
+					phy-mode = "gmii";
+					phy-handle = <&phy13>;
+				};
+				ethernet@5 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <5>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy5>;
+				};
+			};
+
+			mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "lantiq,xrx200-mdio";
+
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy5: ethernet-phy@5 {
+					reg = <0x5>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy11: ethernet-phy@11 {
+					reg = <0x11>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy13: ethernet-phy@13 {
+					reg = <0x13>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		stp: stp@E100BB0 {
+			compatible = "lantiq,gpio-stp-xway";
+			reg = <0xE100BB0 0x40>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			lantiq,shadow = <0xffffff>;
+			lantiq,groups = <0x7>;
+			lantiq,dsl = <0x0>;
+			lantiq,phy1 = <0x0>;
+			lantiq,phy2 = <0x0>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 0>;
+			lantiq,portmask = <0x3>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+			reg = <0x7000000 0x8000         /* config space */
+				0xE105400 0x400>;       /* pci bridge */
+			lantiq,bus-clock = <33333333>;
+			/*lantiq,external-clock;*/
+			lantiq,delay-hi = <0>; /* 0ns delay */
+			lantiq,delay-lo = <0>; /* 0.0ns delay */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
+				>;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0x1>;	/* GNT1 */
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/vr9_phy11g_a1x.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/vr9_phy11g_a2x.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 39 1>;
+			linux,code = <0x198>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 1 1>;
+			linux,code = <0xf7>;
+		};
+	};
+};