aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2007-06-30 15:06:38 +0000
committerGabor Juhos <juhosg@openwrt.org>2007-06-30 15:06:38 +0000
commit9e922402c2d1bddfa6cce8e7534771cfdfade3fe (patch)
tree4aebbc9ee2c556f85a19dd4b9d1efbb4e695de2f
parentb2da558755dc20362a18e1d7a00a6a47f73e93c5 (diff)
downloadupstream-9e922402c2d1bddfa6cce8e7534771cfdfade3fe.tar.gz
upstream-9e922402c2d1bddfa6cce8e7534771cfdfade3fe.tar.bz2
upstream-9e922402c2d1bddfa6cce8e7534771cfdfade3fe.zip
[adm5120] restore old patches for 2.6.21.5 kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7798 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rw-r--r--target/linux/adm5120-2.6/patches/001-adm5120.patch89
-rw-r--r--target/linux/adm5120-2.6/patches/002-adm5120_flash.patch25
-rw-r--r--target/linux/adm5120-2.6/patches/003-adm5120_switch.patch25
-rw-r--r--target/linux/adm5120-2.6/patches/004-adm5120_uart.patch50
-rw-r--r--target/linux/adm5120-2.6/patches/005-adm5120_usb.patch53
-rw-r--r--target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch25
-rw-r--r--target/linux/adm5120-2.6/patches/007-adm5120_pci.patch20
-rw-r--r--target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch37
-rwxr-xr-xtarget/linux/adm5120-2.6/patches/101-mtd-mxflash.patch31
-rw-r--r--target/linux/adm5120-2.6/patches/140-cmdline_hack.patch27
-rw-r--r--target/linux/adm5120-2.6/patches/500-Nand.patch29
11 files changed, 411 insertions, 0 deletions
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch
new file mode 100644
index 0000000000..70129373f8
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/001-adm5120.patch
@@ -0,0 +1,89 @@
+diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
+--- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100
+@@ -12,6 +12,21 @@
+ prompt "System type"
+ default SGI_IP22
+
++config MIPS_ADM5120
++ bool "Support for ADM5120 SoC"
++ select SYS_HAS_CPU_MIPS32_R1
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++ select IRQ_CPU
++ select SYS_SUPPORTS_LITTLE_ENDIAN
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select GENERIC_GPIO
++
++config PCI_ADM5120
++ bool "Add PCI control support for ADM5120"
++ depends on MIPS_ADM5120 && PCI
++
+ config MIPS_MTX1
+ bool "4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile
+--- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100
+@@ -165,6 +165,14 @@
+ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
+
+ #
++# ADMtek 5120
++#
++
++core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
++cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
++load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
++
++#
+ # Common Alchemy Au1x00 stuff
+ #
+ core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
+diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
+--- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100
+@@ -212,6 +212,42 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
+ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+
++/*
++ * Valid machtype for group ADMtek ADM5120
++ */
++#define MACH_GROUP_ADM5120 23
++#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */
++#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
++#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
++#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
++#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
++#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
++#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
++#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
++#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
++#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
++#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
++#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
++#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
++#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
++#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
++#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
++#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
++#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
++#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
++#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
++#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
++#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
++#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
++#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
++#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
++#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
++#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
++#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
++#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
++#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
++#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
new file mode 100644
index 0000000000..503a49567c
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
@@ -0,0 +1,25 @@
+diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig
+--- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -622,5 +622,10 @@
+
+ This selection automatically selects the map_ram driver.
+
++config MTD_ADM5120
++ tristate "Map driver for ADMtek ADM5120 boards"
++ depends on MIPS_ADM5120
++ select MTD_CFI_AMDSTD
++
+ endmenu
+
+diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile
+--- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100
+@@ -43,6 +43,7 @@
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI) += pci.o
+ obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
++obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o
+ obj-$(CONFIG_MTD_LASAT) += lasat.o
+ obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312) += edb7312.o
diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
new file mode 100644
index 0000000000..f6fec30bca
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
@@ -0,0 +1,25 @@
+diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig
+--- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -450,6 +450,10 @@
+ If you have an Alchemy Semi AU1X00 based system
+ say Y. Otherwise, say N.
+
++config MIPS_ADM5120_ENET
++ tristate "MIPS ADM5120 Ethernet switch support"
++ depends on NET_ETHERNET && MIPS_ADM5120
++
+ config NET_SB1250_MAC
+ tristate "SB1250 Ethernet support"
+ depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile
+--- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100
+@@ -164,6 +164,7 @@
+ # This is also a 82596 and should probably be merged
+ obj-$(CONFIG_LP486E) += lp486e.o
+
++obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
+ obj-$(CONFIG_ETH16I) += eth16i.o
+ obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
+ obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
new file mode 100644
index 0000000000..6f2ef7bb36
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
@@ -0,0 +1,50 @@
+diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig
+--- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -246,6 +246,22 @@
+
+ comment "Non-8250 serial port support"
+
++config SERIAL_ADM5120
++ bool "ADM5120 serial port support"
++ depends on MIPS_ADM5120
++ select SERIAL_CORE
++ select SERIAL_CORE_CONSOLE
++ help
++ Driver for the on chip UARTs on the ADM5120 SoC
++
++config ADM5120_NR_UARTS
++ int "Maximum number of ADM5120 serial ports"
++ depends on SERIAL_ADM5120
++ default "2"
++ ---help---
++ Set this to the number of serial ports you want the driver to
++ support.
++
+ config SERIAL_AMBA_PL010
+ tristate "ARM AMBA PL010 serial port support"
+ depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
+diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile
+--- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100
+@@ -20,6 +20,7 @@
+ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
+ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
+ obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h
+--- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100
+@@ -133,6 +133,9 @@
+ #define PORT_S3C2412 73
+
+
++/* ADMtek ADM5120 SoC */
++#define PORT_ADM5120 68
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
new file mode 100644
index 0000000000..40e4fbedf4
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
@@ -0,0 +1,53 @@
+diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c
+--- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100
+@@ -2156,6 +2156,8 @@
+ USB_DT_DEVICE << 8, 0,
+ buf, GET_DESCRIPTOR_BUFSIZE,
+ (i ? USB_CTRL_GET_TIMEOUT : 1000));
++printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
++buf->bDescriptorType, USB_DT_DEVICE);
+ switch (buf->bMaxPacketSize0) {
+ case 8: case 16: case 32: case 64: case 255:
+ if (buf->bDescriptorType ==
+diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig
+--- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -192,3 +192,6 @@
+ To compile this driver as a module, choose M here: the
+ module will be called "sl811_cs".
+
++config USB_ADM5120_HCD
++ tristate "ADM5120 HCD support"
++ depends on USB && MIPS_ADM5120
+diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile
+--- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100
+@@ -16,3 +16,4 @@
+ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
+ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
+ obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
+diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig
+--- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -91,8 +91,6 @@
+
+ source "drivers/usb/net/Kconfig"
+
+-source "drivers/usb/mon/Kconfig"
+-
+ comment "USB port drivers"
+ depends on USB
+
+diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile
+--- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100
+@@ -17,6 +17,7 @@
+ obj-$(CONFIG_USB_U132_HCD) += host/
+ obj-$(CONFIG_ETRAX_USB_HOST) += host/
+ obj-$(CONFIG_USB_OHCI_AT91) += host/
++obj-$(CONFIG_USB_ADM5120_HCD) += host/
+
+ obj-$(CONFIG_USB_ACM) += class/
+ obj-$(CONFIG_USB_PRINTER) += class/
diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch
new file mode 100644
index 0000000000..593743d7ba
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch
@@ -0,0 +1,25 @@
+diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig
+--- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -1034,7 +1034,9 @@
+ The mmtimer device allows direct userspace access to the
+ Altix system timer.
+
+-source "drivers/char/tpm/Kconfig"
++config ADM5120_GPIO
++ tristate "ADM5120 GPIO"
++ depends on MIPS_ADM5120
+
+ config TELCLOCK
+ tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile
+--- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100
+@@ -90,6 +90,7 @@
+ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+ obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+ obj-$(CONFIG_TELCLOCK) += tlclk.o
++obj-$(CONFIG_ADM5120_GPIO) += adm5120_gpio.o
+
+ obj-$(CONFIG_WATCHDOG) += watchdog/
+ obj-$(CONFIG_MWAVE) += mwave/
diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
new file mode 100644
index 0000000000..25ec59a390
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
@@ -0,0 +1,20 @@
+diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile
+--- linux-2.6.21.1/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100
+@@ -53,3 +53,4 @@
+ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
++obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
+--- linux-2.6.21.1.old/include/linux/pci_ids.h 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1/include/linux/pci_ids.h 2007-05-31 09:36:56.000000000 +0200
+@@ -1701,6 +1701,9 @@
+ #define PCI_VENDOR_ID_ESDGMBH 0x12fe
+ #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+
++#define PCI_VENDOR_ID_ADMTEK 0x1317
++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
++
+ #define PCI_VENDOR_ID_SIIG 0x131f
+ #define PCI_SUBVENDOR_ID_SIIG 0x131f
+ #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
new file mode 100644
index 0000000000..81ec37d05f
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
@@ -0,0 +1,37 @@
+diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig
+--- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200
++++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200
+@@ -157,6 +157,22 @@
+ for your particular device. It won't happen automatically. The
+ 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+
++config MTD_MYLOADER_PARTS
++ tristate "MyLoader partition parsing"
++ depends on MIPS_ADM5120 && MTD_PARTITIONS
++ ---help---
++ MyLoader is a bootloader which allows the user to define partitions
++ in flash devices, by putting a table in the second erase block
++ on the device, similar to a partition table. This table gives the
++ offsets and lengths of the user defined partitions.
++
++ If you need code which can detect and parse these tables, and
++ register MTD 'partitions' corresponding to each image detected,
++ enable this option.
++
++ You will still need the parsing functions to be called by the driver
++ for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ depends on MTD
+
+diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile
+--- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR) += mtdchar.o
diff --git a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch b/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch
new file mode 100755
index 0000000000..754a91e09f
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch
@@ -0,0 +1,31 @@
+--- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old 2007-01-11 03:10:36.000000000 +0800
++++ linux-2.6.19.2/drivers/mtd/chips/Kconfig 2007-03-29 14:43:32.000000000 +0800
+@@ -199,6 +199,14 @@
+ provides support for one of those command sets, used on chips
+ including the AMD Am29LV320.
+
++config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
++ bool "Force bottom boot for Macronix flash chips"
++ depends on MTD_CFI_AMDSTD
++ help
++ Some Macronix flash chips have wrong CFI info, and the driver may
++ detect the type incorrectly. Select this if the chip part number
++ ends with BTC.
++
+ config MTD_CFI_STAA
+ tristate "Support for ST (Advanced Architecture) flash chips"
+ depends on MTD_GEN_PROBE
+--- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old 2007-03-22 16:14:56.000000000 +0800
++++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-29 14:07:28.000000000 +0800
+@@ -320,6 +320,11 @@
+ cfi_tell_features(extp);
+ #endif
+
++#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
++ extp->TopBottom = 2;
++ bootloc = extp->TopBottom;
++#endif
++
+ bootloc = extp->TopBottom;
+ if ((bootloc != 2) && (bootloc != 3)) {
+ printk(KERN_WARNING "%s: CFI does not contain boot "
diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
new file mode 100644
index 0000000000..23f377c90b
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
@@ -0,0 +1,27 @@
+diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
+--- linux.old/arch/mips/kernel/head.S 2006-12-06 17:30:27.000000000 +0100
++++ linux.dev/arch/mips/kernel/head.S 2006-12-06 18:34:43.000000000 +0100
+@@ -129,15 +129,20 @@
+ #endif
+ .endm
+
+-
+ j kernel_entry
+ nop
+-
++ nop
++
+ /*
+ * Reserved space for exception handlers.
+ * Necessary for machines which link their kernels at KSEG0.
++ * Use as temporary storage for the kernel command line, so that it
++ * can be updated easily without having to relink the kernel.
+ */
+- .align 10
++
++EXPORT(_image_cmdline)
++ .ascii "CMDLINE:"
++ .align 10
+
+ EXPORT(stext) # used for profiling
+ EXPORT(_stext)
diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch
new file mode 100644
index 0000000000..05beb20241
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches/500-Nand.patch
@@ -0,0 +1,29 @@
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index cfe288a..c528024 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -55,6 +55,12 @@ config MTD_NAND_TOTO
+ help
+ Support for NAND flash on Texas Instruments Toto platform.
+
++config MTD_NAND_RB100
++ tristate "NAND Flash device on RB100 board"
++ depends on MTD_NAND
++ help
++ Support for NAND flash on RB100 platform.
++
+ config MTD_NAND_IDS
+ tristate
+
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index 4174202..2be57c1 100644
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.
+
+ obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
+ obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
++obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o
+ obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
+ obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
+ obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o