omap: add kernel 3.14 support

It has been compile-tested only so far. Please give it a try.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42449 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 636 insertions, 0 deletions

diff --git a/target/linux/omap/patches-3.14/0334-video-da8xx-fb-adding-dt-support.patch b/target/linux/omap/patches-3.14/0334-video-da8xx-fb-adding-dt-support.patch
new file mode 100644
index 0000000000..63ec77f124
--- /dev/null
+++ b/target/linux/omap/patches-3.14/0334-video-da8xx-fb-adding-dt-support.patch
@@ -0,0 +1,203 @@
+From 884d3962ef4787c8cf0b8a7a673531c623d1dff8 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Fri, 2 Aug 2013 15:35:36 -0500
+Subject: [PATCH 334/752] video: da8xx-fb: adding dt support
+
+Enhancing driver to enable probe triggered by a corresponding dt entry.
+
+Add da8xx-fb.txt documentation to devicetree section.
+
+Obtain fb_videomode details for the connected lcd panel using the
+display timing details present in DT.
+
+Ensure that platform data is present before checking whether platform
+callback is present (the one used to control backlight). So far this
+was not an issue as driver was purely non-DT triggered, but now DT
+support has been added this check must be performed.
+
+v2: squashing multiple commits from Afzal Mohammed (afzal@ti.com)
+v3: remove superfluous cast
+v4: expose both ti,am3352-lcdc and ti,da830-lcdc for .compatible
+	as driver can use enhanced features of all version of the
+	silicon block.
+v5: addressed review comments from Prabhakar Lad
+v6: Changed the .compatible naming to match the existing drm bindings
+	for am33xx devices
+v7: clarify which compatible to use in the documentation for DA850
+
+Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ .../devicetree/bindings/video/da8xx-fb.txt         |   42 +++++++++++++
+ drivers/video/da8xx-fb.c                           |   66 +++++++++++++++++++-
+ 2 files changed, 105 insertions(+), 3 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/video/da8xx-fb.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/video/da8xx-fb.txt
+@@ -0,0 +1,42 @@
++TI LCD Controller on DA830/DA850/AM335x SoC's
++
++Required properties:
++- compatible:
++	DA830, DA850 - "ti,da8xx-tilcdc"
++	AM335x SoC's - "ti,am33xx-tilcdc"
++- reg: Address range of lcdc register set
++- interrupts: lcdc interrupt
++- display-timings: typical videomode of lcd panel, represented as child.
++  Refer Documentation/devicetree/bindings/video/display-timing.txt for
++  display timing binding details. If multiple videomodes are mentioned
++  in display timings node, typical videomode has to be mentioned as the
++  native mode or it has to be first child (driver cares only for native
++  videomode).
++
++Recommended properties:
++- ti,hwmods: Name of the hwmod associated to the LCDC
++
++Example for am335x SoC's:
++
++lcdc@4830e000 {
++	compatible = "ti,am33xx-tilcdc";
++	reg =  <0x4830e000 0x1000>;
++	interrupts = <36>;
++	ti,hwmods = "lcdc";
++	status = "okay";
++	display-timings {
++		800x480p62 {
++			clock-frequency = <30000000>;
++			hactive = <800>;
++			vactive = <480>;
++			hfront-porch = <39>;
++			hback-porch = <39>;
++			hsync-len = <47>;
++			vback-porch = <29>;
++			vfront-porch = <13>;
++			vsync-len = <2>;
++			hsync-active = <1>;
++			vsync-active = <1>;
++		};
++	};
++};
+--- a/drivers/video/da8xx-fb.c
++++ b/drivers/video/da8xx-fb.c
+@@ -36,6 +36,7 @@
+ #include <linux/slab.h>
+ #include <linux/delay.h>
+ #include <linux/lcm.h>
++#include <video/of_display_timing.h>
+ #include <video/da8xx-fb.h>
+ #include <asm/div64.h>
+ 
+@@ -1311,12 +1312,54 @@ static struct fb_ops da8xx_fb_ops = {
+ 	.fb_blank = cfb_blank,
+ };
+ 
++static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
++{
++	struct lcd_ctrl_config *cfg;
++
++	cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
++	if (!cfg)
++		return NULL;
++
++	/* default values */
++
++	if (lcd_revision == LCD_VERSION_1)
++		cfg->bpp = 16;
++	else
++		cfg->bpp = 32;
++
++	/*
++	 * For panels so far used with this LCDC, below statement is sufficient.
++	 * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
++	 * with additional/modified values. Those values would have to be then
++	 * obtained from dt(requiring new dt bindings).
++	 */
++
++	cfg->panel_shade = COLOR_ACTIVE;
++
++	return cfg;
++}
++
+ static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
+ {
+ 	struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
+ 	struct fb_videomode *lcdc_info;
++	struct device_node *np = dev->dev.of_node;
+ 	int i;
+ 
++	if (np) {
++		lcdc_info = devm_kzalloc(&dev->dev,
++					 sizeof(struct fb_videomode),
++					 GFP_KERNEL);
++		if (!lcdc_info)
++			return NULL;
++
++		if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
++			dev_err(&dev->dev, "timings not available in DT\n");
++			return NULL;
++		}
++		return lcdc_info;
++	}
++
+ 	for (i = 0, lcdc_info = known_lcd_panels;
+ 		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
+ 		if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
+@@ -1345,7 +1388,7 @@ static int fb_probe(struct platform_devi
+ 	int ret;
+ 	unsigned long ulcm;
+ 
+-	if (fb_pdata == NULL) {
++	if (fb_pdata == NULL && !device->dev.of_node) {
+ 		dev_err(&device->dev, "Can not get platform data\n");
+ 		return -ENOENT;
+ 	}
+@@ -1385,7 +1428,10 @@ static int fb_probe(struct platform_devi
+ 		break;
+ 	}
+ 
+-	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
++	if (device->dev.of_node)
++		lcd_cfg = da8xx_fb_create_cfg(device);
++	else
++		lcd_cfg = fb_pdata->controller_data;
+ 
+ 	if (!lcd_cfg) {
+ 		ret = -EINVAL;
+@@ -1404,7 +1450,7 @@ static int fb_probe(struct platform_devi
+ 	par->dev = &device->dev;
+ 	par->lcdc_clk = tmp_lcdc_clk;
+ 	par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
+-	if (fb_pdata->panel_power_ctrl) {
++	if (fb_pdata && fb_pdata->panel_power_ctrl) {
+ 		par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
+ 		par->panel_power_ctrl(1);
+ 	}
+@@ -1652,6 +1698,19 @@ static int fb_resume(struct platform_dev
+ #define fb_resume NULL
+ #endif
+ 
++#if IS_ENABLED(CONFIG_OF)
++static const struct of_device_id da8xx_fb_of_match[] = {
++	/*
++	 * this driver supports version 1 and version 2 of the
++	 * Texas Instruments lcd controller (lcdc) hardware block
++	 */
++	{.compatible = "ti,da8xx-tilcdc", },
++	{.compatible = "ti,am33xx-tilcdc", },
++	{},
++};
++MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
++#endif
++
+ static struct platform_driver da8xx_fb_driver = {
+ 	.probe = fb_probe,
+ 	.remove = fb_remove,
+@@ -1660,6 +1719,7 @@ static struct platform_driver da8xx_fb_d
+ 	.driver = {
+ 		   .name = DRIVER_NAME,
+ 		   .owner = THIS_MODULE,
++		   .of_match_table = of_match_ptr(da8xx_fb_of_match),
+ 		   },
+ };
+ module_platform_driver(da8xx_fb_driver);
diff --git a/target/linux/omap/patches-3.14/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch b/target/linux/omap/patches-3.14/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
new file mode 100644
index 0000000000..d565eaee03
--- /dev/null
+++ b/target/linux/omap/patches-3.14/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
@@ -0,0 +1,91 @@
+From 9a1a810516ae9cb3259b898b6879901c5b44fa90 Mon Sep 17 00:00:00 2001
+From: Prathap M S <msprathap@ti.com>
+Date: Mon, 2 Sep 2013 12:05:23 +0530
+Subject: [PATCH 343/752] video: da8xx-fb: Add API to register wait for vsync
+ callback
+
+This patch adds APIs to register and unregister wait for vsync callback.
+This is derived from commit id 2d44302545da24fd22912d964102bc31a7489e97
+This commit id was part of 3.2 kernel sources.
+
+Signed-off-by: Prathap M S <msprathap@ti.com>
+---
+ drivers/video/da8xx-fb.c |   33 +++++++++++++++++++++++++++++++++
+ include/video/da8xx-fb.h |    4 ++++
+ 2 files changed, 37 insertions(+)
+
+--- a/drivers/video/da8xx-fb.c
++++ b/drivers/video/da8xx-fb.c
+@@ -197,6 +197,9 @@ static struct fb_fix_screeninfo da8xx_fb
+ 	.accel = FB_ACCEL_NONE
+ };
+ 
++static vsync_callback_t vsync_cb_handler;
++static void *vsync_cb_arg;
++
+ static struct fb_videomode known_lcd_panels[] = {
+ 	/* Sharp LCD035Q3DG01 */
+ 	[0] = {
+@@ -825,6 +828,32 @@ static int lcd_init(struct da8xx_fb_par
+ 	return 0;
+ }
+ 
++int register_vsync_cb(vsync_callback_t handler, void *arg, int idx)
++{
++	if ((vsync_cb_handler == NULL) && (vsync_cb_arg == NULL)) {
++		vsync_cb_arg = arg;
++		vsync_cb_handler = handler;
++	} else {
++		return -EEXIST;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(register_vsync_cb);
++
++int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx)
++{
++	if ((vsync_cb_handler == handler) && (vsync_cb_arg == arg)) {
++		vsync_cb_handler = NULL;
++		vsync_cb_arg = NULL;
++	} else {
++		return -ENXIO;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(unregister_vsync_cb);
++
+ /* IRQ handler for version 2 of LCDC */
+ static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
+ {
+@@ -862,6 +891,8 @@ static irqreturn_t lcdc_irq_handler_rev0
+ 				   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+ 			par->vsync_flag = 1;
+ 			wake_up_interruptible(&par->vsync_wait);
++			if (vsync_cb_handler)
++				vsync_cb_handler(vsync_cb_arg);
+ 		}
+ 
+ 		if (stat & LCD_END_OF_FRAME1) {
+@@ -937,6 +968,8 @@ static irqreturn_t lcdc_irq_handler_rev0
+ 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+ 			par->vsync_flag = 1;
+ 			wake_up_interruptible(&par->vsync_wait);
++			if (vsync_cb_handler)
++				vsync_cb_handler(vsync_cb_arg);
+ 		}
+ 	}
+ 
+--- a/include/video/da8xx-fb.h
++++ b/include/video/da8xx-fb.h
+@@ -91,5 +91,9 @@ struct lcd_sync_arg {
+ /* Proprietary FB_SYNC_ flags */
+ #define FB_SYNC_CLK_INVERT 0x40000000
+ 
++typedef void (*vsync_callback_t)(void *arg);
++int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
++int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
++
+ #endif  /* ifndef DA8XX_FB_H */
+ 
diff --git a/target/linux/omap/patches-3.14/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch b/target/linux/omap/patches-3.14/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
new file mode 100644
index 0000000000..0fe90156a8
--- /dev/null
+++ b/target/linux/omap/patches-3.14/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
@@ -0,0 +1,38 @@
+From c99bd415829ef29adf71bb1e1b577650f10e93f5 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Mon, 4 Nov 2013 12:27:40 -0600
+Subject: [PATCH 752/752] video/da8xx-fb fix defect with vsync callback
+ invocation
+
+Fix defect where SGX is running at half of the expected framerate.
+The original patch (@ commit ID 9a1a810516ae9cb3259b898b6879901c5b44fa90)
+seems to have a mistake where it only calls the callback
+for the even or the odd frames depending on the revision of the LCD controller
+This patch corrects this and invokes the callback for both odd and even frame
+for just the Rev02 version of the LCDC (won't find an SGX GPU on a Rev01).
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ drivers/video/da8xx-fb.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/video/da8xx-fb.c
++++ b/drivers/video/da8xx-fb.c
+@@ -903,6 +903,8 @@ static irqreturn_t lcdc_irq_handler_rev0
+ 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+ 			par->vsync_flag = 1;
+ 			wake_up_interruptible(&par->vsync_wait);
++			if (vsync_cb_handler)
++				vsync_cb_handler(vsync_cb_arg);
+ 		}
+ 
+ 		/* Set only when controller is disabled and at the end of
+@@ -968,8 +970,6 @@ static irqreturn_t lcdc_irq_handler_rev0
+ 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+ 			par->vsync_flag = 1;
+ 			wake_up_interruptible(&par->vsync_wait);
+-			if (vsync_cb_handler)
+-				vsync_cb_handler(vsync_cb_arg);
+ 		}
+ 	}
+ 
diff --git a/target/linux/omap/patches-3.14/900-wlcore-Add-support-for-DT-platform-data.patch b/target/linux/omap/patches-3.14/900-wlcore-Add-support-for-DT-platform-data.patch
new file mode 100644
index 0000000000..750d9e3d68
--- /dev/null
+++ b/target/linux/omap/patches-3.14/900-wlcore-Add-support-for-DT-platform-data.patch
@@ -0,0 +1,155 @@
+When running with DT, we no longer have a board file that can set up the
+platform data for wlcore. Allow this data to be passed from DT.
+
+Since some platforms use a gpio-irq, add support for passing either the
+irq number or the gpio number. For the latter case, the driver will
+request the gpio and convert it to the irq number. If an irq is
+specified, it'll be used as is.
+
+[Arik - the pdev_data pointer does not belong to us and is freed when
+the device is released. Dereference to our private data first.]
+
+Signed-off-by: Ido Yariv <ido@wizery.com>
+Signed-off-by: Arik Nemtsov <arik@wizery.com>
+---
+ drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++---
+ include/linux/wl12xx.h                |  3 +-
+ 2 files changed, 67 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/wireless/ti/wlcore/sdio.c
++++ b/drivers/net/wireless/ti/wlcore/sdio.c
+@@ -34,6 +34,7 @@
+ #include <linux/wl12xx.h>
+ #include <linux/pm_runtime.h>
+ #include <linux/printk.h>
++#include <linux/of.h>
+ 
+ #include "wlcore.h"
+ #include "wl12xx_80211.h"
+@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_
+ 	.set_block_size = wl1271_sdio_set_block_size,
+ };
+ 
++static const struct of_device_id wlcore_of_match[] = {
++	{
++		.compatible = "wlcore",
++	},
++	{}
++};
++MODULE_DEVICE_TABLE(of, wlcore_of_match);
++
++static struct wl12xx_platform_data *get_platform_data(struct device *dev)
++{
++	struct wl12xx_platform_data *pdata;
++	struct device_node *np;
++	u32 gpio;
++
++	pdata = wl12xx_get_platform_data();
++	if (!IS_ERR(pdata))
++		return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL);
++
++	np = of_find_matching_node(NULL, wlcore_of_match);
++	if (!np) {
++		dev_err(dev, "No platform data set\n");
++		return NULL;
++	}
++
++	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
++	if (!pdata) {
++		dev_err(dev, "Can't allocate platform data\n");
++		return NULL;
++	}
++
++	if (of_property_read_u32(np, "irq", &pdata->irq)) {
++		if (!of_property_read_u32(np, "gpio", &gpio) &&
++		    !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) {
++			pdata->gpio = gpio;
++			pdata->irq = gpio_to_irq(gpio);
++		}
++	}
++
++	/* Optional fields */
++	pdata->use_eeprom = of_property_read_bool(np, "use-eeprom");
++	of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock);
++	of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock);
++	of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks);
++
++	return pdata;
++}
++
++static void del_platform_data(struct wl12xx_platform_data *pdata)
++{
++	if (pdata->gpio)
++		gpio_free(pdata->gpio);
++
++	kfree(pdata);
++}
++
+ static int wl1271_probe(struct sdio_func *func,
+ 				  const struct sdio_device_id *id)
+ {
+@@ -248,12 +304,9 @@ static int wl1271_probe(struct sdio_func
+ 	/* Use block mode for transferring over one block size of data */
+ 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+ 
+-	pdev_data->pdata = wl12xx_get_platform_data();
+-	if (IS_ERR(pdev_data->pdata)) {
+-		ret = PTR_ERR(pdev_data->pdata);
+-		dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
++	pdev_data->pdata = get_platform_data(&func->dev);
++	if (!(pdev_data->pdata))
+ 		goto out_free_glue;
+-	}
+ 
+ 	/* if sdio can keep power while host is suspended, enable wow */
+ 	mmcflags = sdio_get_host_pm_caps(func);
+@@ -282,7 +335,7 @@ static int wl1271_probe(struct sdio_func
+ 	if (!glue->core) {
+ 		dev_err(glue->dev, "can't allocate platform_device");
+ 		ret = -ENOMEM;
+-		goto out_free_glue;
++		goto out_free_pdata;
+ 	}
+ 
+ 	glue->core->dev.parent = &func->dev;
+@@ -316,6 +369,9 @@ static int wl1271_probe(struct sdio_func
+ out_dev_put:
+ 	platform_device_put(glue->core);
+ 
++out_free_pdata:
++	del_platform_data(pdev_data->pdata);
++
+ out_free_glue:
+ 	kfree(glue);
+ 
+@@ -329,11 +385,14 @@ out:
+ static void wl1271_remove(struct sdio_func *func)
+ {
+ 	struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
++	struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data;
++	struct wl12xx_platform_data *pdata = pdev_data->pdata;
+ 
+ 	/* Undo decrement done above in wl1271_probe */
+ 	pm_runtime_get_noresume(&func->dev);
+ 
+ 	platform_device_unregister(glue->core);
++	del_platform_data(pdata);
+ 	kfree(glue);
+ }
+ 
+--- a/include/linux/wl12xx.h
++++ b/include/linux/wl12xx.h
+@@ -51,11 +51,12 @@ enum {
+ struct wl12xx_platform_data {
+ 	void (*set_power)(bool enable);
+ 	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
++	int gpio;
+ 	int irq;
+ 	bool use_eeprom;
+ 	int board_ref_clock;
+ 	int board_tcxo_clock;
+-	unsigned long platform_quirks;
++	u32 platform_quirks;
+ 	bool pwr_in_suspend;
+ };
+ 
diff --git a/target/linux/omap/patches-3.14/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch b/target/linux/omap/patches-3.14/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
new file mode 100644
index 0000000000..0430a4fd67
--- /dev/null
+++ b/target/linux/omap/patches-3.14/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
@@ -0,0 +1,70 @@
+--- a/arch/arm/boot/dts/am335x-evmsk.dts
++++ b/arch/arm/boot/dts/am335x-evmsk.dts
+@@ -132,6 +132,39 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+ 
++	lcd_pins_s0: lcd_pins_s0 {
++		pinctrl-single,pins = <
++			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
++			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
++			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
++			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
++			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
++			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
++			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
++			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
++			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
++			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
++			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
++			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
++			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
++			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
++			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
++			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
++			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
++			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
++			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
++			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
++			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
++			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
++			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
++			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
++			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
++			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
++			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
++			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
++		>;
++	};
++
+ 	user_leds_s0: user_leds_s0 {
+ 		pinctrl-single,pins = <
+ 			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+@@ -495,6 +528,27 @@
+ 		rx-num-evt = <1>;
+ };
+ 
++&lcdc {
++	pinctrl-names = "default";
++	pinctrl-0 = <&lcd_pins_s0>;
++	status = "okay";
++	display-timings {
++		480x272 {
++			hactive         = <480>;
++			vactive         = <272>;
++			hback-porch     = <43>;
++			hfront-porch    = <8>;
++			hsync-len       = <4>;
++			vback-porch     = <12>;
++			vfront-porch    = <4>;
++			vsync-len       = <10>;
++			clock-frequency = <9000000>;
++			hsync-active    = <0>;
++			vsync-active    = <0>;
++		};
++	};
++};
++
+ &tscadc {
+ 	status = "okay";
+ 	tsc {
diff --git a/target/linux/omap/patches-3.14/950-am335x-evmsk-wilink-dts.patch b/target/linux/omap/patches-3.14/950-am335x-evmsk-wilink-dts.patch
new file mode 100644
index 0000000000..faefdb3a94
--- /dev/null
+++ b/target/linux/omap/patches-3.14/950-am335x-evmsk-wilink-dts.patch
@@ -0,0 +1,79 @@
+--- a/arch/arm/boot/dts/am335x-evmsk.dts
++++ b/arch/arm/boot/dts/am335x-evmsk.dts
+@@ -14,6 +14,7 @@
+ /dts-v1/;
+ 
+ #include "am33xx.dtsi"
++#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pwm/pwm.h>
+ 
+ / {
+@@ -26,6 +27,13 @@
+ 		};
+ 	};
+ 
++	wlan {
++		compatible = "wlcore";
++
++		gpio = <31>;
++		board-ref-clock = <4>;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x80000000 0x10000000>; /* 256 MB */
+@@ -45,6 +53,16 @@
+ 		regulator-boot-on;
+ 	};
+ 
++	vmmc_wl: fixedregulator@2 {
++		compatible = "regulator-fixed";
++		regulator-name = "vmmc-wl";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		gpio = <&gpio1 29 0>;
++		startup-delay-us = <70000>;
++		enable-active-high;
++	};
++
+ 	leds {
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&user_leds_s0>;
+@@ -303,6 +321,20 @@
+ 			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ 		>;
+ 	};
++
++	wilink_pins: pinmux_wilink_pins {
++		pinctrl-single,pins = <
++			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
++			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
++			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
++			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
++			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
++			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
++			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
++			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
++		>;
++	};
++
+ };
+ 
+ &uart0 {
+@@ -512,6 +544,16 @@
+ 	ti,no-reset-on-init;
+ };
+ 
++&mmc2 {
++	status = "okay";
++	vmmc-supply = <&vmmc_wl>;
++	bus-width = <4>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&wilink_pins>;
++	ti,non-removable;
++	keep-power-in-suspend;
++};
++
+ &mcasp1 {
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&mcasp1_pins>;