aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohann Neuhauser <johann@it-neuhauser.de>2018-05-18 18:06:03 +0200
committerJohn Crispin <john@phrozen.org>2018-05-22 20:53:15 +0200
commita7e1e919afa9659f66dada5e69d1b162f447ced7 (patch)
tree18d949d909bca4f07d74df18bacf72ba92d70962
parentfaf0a460c4b8d77bed270156a4454b964a551c95 (diff)
downloadupstream-a7e1e919afa9659f66dada5e69d1b162f447ced7.tar.gz
upstream-a7e1e919afa9659f66dada5e69d1b162f447ced7.tar.bz2
upstream-a7e1e919afa9659f66dada5e69d1b162f447ced7.zip
ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344)
working: - leds - buttons - lan / wan - usb (hub port 1 + 2) - wifi 5g - sysupgrade - ... not working: - wifi 2g Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network6
-rw-r--r--target/linux/ath79/base-files/etc/diag.sh4
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom4
-rw-r--r--target/linux/ath79/dts/ar9344.dtsi32
-rw-r--r--target/linux/ath79/dts/ar9344_tl-wdr3600.dts9
-rw-r--r--target/linux/ath79/dts/ar9344_tl-wdr4300.dts9
-rw-r--r--target/linux/ath79/dts/ar9344_tl-wdr4300.dtsi240
-rw-r--r--target/linux/ath79/dts/ar934x.dtsi219
-rw-r--r--target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c1
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk26
10 files changed, 548 insertions, 2 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 19361f161e..12176c1877 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -13,6 +13,12 @@ ath79_setup_interfaces()
ucidef_set_interface_lan "eth0"
;;
+ "tplink,tl-wdr3600"|\
+ "tplink,tl-wdr4300")
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+ ;;
+
"tplink,tl-wr1043nd-v1")
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
diff --git a/target/linux/ath79/base-files/etc/diag.sh b/target/linux/ath79/base-files/etc/diag.sh
index 8022151378..b18463413a 100644
--- a/target/linux/ath79/base-files/etc/diag.sh
+++ b/target/linux/ath79/base-files/etc/diag.sh
@@ -2,6 +2,8 @@
. /lib/functions/leds.sh
+status_led="$(get_dt_led status)"
+
get_status_led() {
local board=$(board_name)
local boardname="${board##*,}"
@@ -23,7 +25,7 @@ get_status_led() {
}
set_state() {
- get_status_led
+ [ -z "$status_led" ] && get_status_led
case "$1" in
preinit)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index c2d87f58de..c09dca11d7 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -50,6 +50,10 @@ case "$FIRMWARE" in
"avm,fritz300e")
ath9k_eeprom_extract_reverse "urloader" 5441 1088
;;
+ "tplink,tl-wdr3600"|\
+ "tplink,tl-wdr4300")
+ ath9k_eeprom_extract "art" 20480 1088
+ ;;
"ubnt,unifi")
ath9k_eeprom_extract "art" 4096 2048
;;
diff --git a/target/linux/ath79/dts/ar9344.dtsi b/target/linux/ath79/dts/ar9344.dtsi
new file mode 100644
index 0000000000..655ab35d79
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar934x.dtsi"
+
+/ {
+ compatible = "qca,ar9344";
+};
+
+&apb {
+ pcie: pcie-controller@180c0000 {
+ compatible = "qcom,ar9340-pci", "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x180c0000 0x1000>, /* CRP */
+ <0x180f0000 0x100>, /* CTRL */
+ <0x14000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie 0>;
+
+ status = "disabled";
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_tl-wdr3600.dts b/target/linux/ath79/dts/ar9344_tl-wdr3600.dts
new file mode 100644
index 0000000000..d0886ee86b
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tl-wdr3600.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link WDR3600";
+ compatible = "tplink,tl-wdr3600";
+};
diff --git a/target/linux/ath79/dts/ar9344_tl-wdr4300.dts b/target/linux/ath79/dts/ar9344_tl-wdr4300.dts
new file mode 100644
index 0000000000..617da57098
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tl-wdr4300.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link WDR4300";
+ compatible = "tplink,tl-wdr4300";
+};
diff --git a/target/linux/ath79/dts/ar9344_tl-wdr4300.dtsi b/target/linux/ath79/dts/ar9344_tl-wdr4300.dtsi
new file mode 100644
index 0000000000..e7f24bfe34
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tl-wdr4300.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ model = "TP-Link WDR4300";
+ compatible = "tplink,tl-wdr4300";
+
+ aliases {
+ led-status = &system;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb1 {
+ label = "tp-link:green:usb1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "tp-link:green:usb2";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ label = "tp-link:green:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "tp-link:green:wlan5g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ button@1 {
+ label = "wifi";
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb1_power {
+ gpio-export,name = "tp-link:power:usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_usb2_power {
+ gpio-export,name = "tp-link:power:usb2";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_ext_lna0 {
+ gpio-export,name = "tp-link:ext:lna0";
+ gpio-export,output = <1>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_ext_lna1 {
+ gpio-export,name = "tp-link:ext:lna1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@168c,0033 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x80000080 /* POWER_ON_STRIP */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-2)>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/ar934x.dtsi b/target/linux/ath79/dts/ar934x.dtsi
new file mode 100644
index 0000000000..b8a915f36c
--- /dev/null
+++ b/target/linux/ath79/dts/ar934x.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/clock/ath79-clk.h>
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,ar9340";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips74Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ref: ref {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "ref";
+ };
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ apb: apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9340-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x12c>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x2c>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_REF>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9340-gpio";
+ reg = <0x18040000 0x2c>;
+
+ interrupts = <2>;
+ ngpios = <23>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@1804002c {
+ compatible = "pinctrl-single";
+
+ reg = <0x1804002c 0x44>;
+
+ #size-cells = <0>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x40 0x2 0x2>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9340-pll", "syscon";
+ reg = <0x18050000 0x4c>;
+
+ #clock-cells = <1>;
+ clocks = <&ref>;
+ clock-names = "ref";
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar9340-wdt", "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar9340-reset", "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+
+ gmac: gmac@18070000 {
+ compatible = "qca,ar9340-gmac", "qca,ar9330-gmac";
+ reg = <0x18070000 0x14>;
+ };
+ };
+
+ usb: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1d8>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar9340-spi", "qca,ar7100-spi";
+ reg = <0x1f000000 0x1c>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar9340-usb-phy", "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+};
+
+&mdio0 {
+ resets = <&rst 22>;
+ reset-names = "mdio";
+};
+
+&eth0 {
+ compatible = "qca,ar9340-eth", "syscon";
+
+ pll-data = <0x16000000 0x00000101 0x00001616>;
+ pll-reg = <0x4 0x2c 17>;
+ pll-handle = <&pll>;
+
+ resets = <&rst 8>, <&rst 9>;
+ reset-names = "mac", "phy";
+};
+
+&mdio1 {
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+};
+
+&eth1 {
+ compatible = "qca,ar9340-eth", "syscon";
+
+ resets = <&rst 12>, <&rst 13>;
+ reset-names = "mac", "phy";
+};
diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
index 3c07adb680..4a966fce9e 100644
--- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
+++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
@@ -625,6 +625,7 @@ __ag71xx_link_adjust(struct ag71xx *ag, bool update)
ath79_set_pll(ag);
} else if (of_device_is_compatible(np, "qca,ar9130-eth")) {
} else if (of_device_is_compatible(np, "qca,ar9340-eth")) {
+ ath79_set_pll(ag);
} else if (of_device_is_compatible(np, "qca,qca9550-eth")) {
} else if (of_device_is_compatible(np, "qca,qca9560-eth")) {
}
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index dd1a983b7f..a368662cca 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -47,7 +47,7 @@ define Device/tplink
KERNEL := kernel-bin | append-dtb | lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | tplink-v1-header
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
+ IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
endef
@@ -72,6 +72,12 @@ define Device/tplink-8m
IMAGE_SIZE := 7936k
endef
+define Device/tplink-8mlzma
+$(Device/tplink)
+ TPLINK_FLASHLAYOUT := 8Mlzma
+ IMAGE_SIZE := 7936k
+endef
+
define Device/tl_wr1043nd_v1
$(Device/tplink-8m)
ATH_SOC := ar9132
@@ -81,3 +87,21 @@ define Device/tl_wr1043nd_v1
SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd
endef
#TARGET_DEVICES += tl_wr1043nd_v1
+
+define Device/tl-wdr3600
+ $(Device/tplink-8mlzma)
+ ATH_SOC := ar9344
+ DEVICE_TITLE := TP-LINK TL-WDR3600
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ TPLINK_HWID := 0x36000001
+ SUPPORTED_DEVICES := tplink,tl-wdr3600 tl-wdr3600
+endef
+TARGET_DEVICES += tl-wdr3600
+
+define Device/tl-wdr4300
+ $(Device/tl-wdr3600)
+ DEVICE_TITLE := TP-LINK TL-WDR4300
+ TPLINK_HWID := 0x43000001
+ SUPPORTED_DEVICES := tplink,tl-wdr4300 tl-wdr4300
+endef
+TARGET_DEVICES += tl-wdr4300