aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2012-10-07 23:23:29 +0000
committerFelix Fietkau <nbd@openwrt.org>2012-10-07 23:23:29 +0000
commit21d182b9e54910c6bdfa6c8934d25b2c115a8588 (patch)
treedd1412b07f8de19a4da7c4fde9a899904dac705c
parentd3567cc886a21426121bd555efe5ec9d7768e3ed (diff)
downloadupstream-21d182b9e54910c6bdfa6c8934d25b2c115a8588.tar.gz
upstream-21d182b9e54910c6bdfa6c8934d25b2c115a8588.tar.bz2
upstream-21d182b9e54910c6bdfa6c8934d25b2c115a8588.zip
ixp4xx: patch cleanup
roll all cambria patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33643
-rw-r--r--target/linux/ixp4xx/patches-3.3/190-cambria_support.patch146
-rw-r--r--target/linux/ixp4xx/patches-3.3/191-cambria_optional_uart.patch96
-rw-r--r--target/linux/ixp4xx/patches-3.3/192-cambria_gpio_device.patch46
-rw-r--r--target/linux/ixp4xx/patches-3.3/193-cambria_pld_gpio.patch107
4 files changed, 145 insertions, 250 deletions
diff --git a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch b/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
index 3c6627cb35..dcd116e8d7 100644
--- a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
+++ b/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
@@ -77,7 +77,7 @@
+subsys_initcall(cambria_pci_init);
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,430 @@
+@@ -0,0 +1,574 @@
+/*
+ * arch/arm/mach-ixp4xx/cambria-setup.c
+ *
@@ -92,11 +92,14 @@
+ */
+
+#include <linux/device.h>
++#include <linux/gpio_buttons.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/at24.h>
++#include <linux/i2c/gw_i2c_pld.h>
+#include <linux/if_ether.h>
+#include <linux/init.h>
++#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/memory.h>
@@ -114,6 +117,7 @@
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/setup.h>
++#include <linux/irq.h>
+
+struct cambria_board_info {
+ unsigned char *model;
@@ -207,6 +211,45 @@
+ .resource = &cambria_uart_resource,
+};
+
++static struct resource cambria_optional_uart_resources[] = {
++ {
++ .start = 0x52000000,
++ .end = 0x52000fff,
++ .flags = IORESOURCE_MEM
++ },
++ {
++ .start = 0x53000000,
++ .end = 0x53000fff,
++ .flags = IORESOURCE_MEM
++ }
++};
++
++static struct plat_serial8250_port cambria_optional_uart_data[] = {
++ {
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM_DELAY,
++ .regshift = 0,
++ .uartclk = 1843200,
++ .rw_delay = 2,
++ },
++ {
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM_DELAY,
++ .regshift = 0,
++ .uartclk = 1843200,
++ .rw_delay = 2,
++ },
++ { },
++};
++
++static struct platform_device cambria_optional_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM1,
++ .dev.platform_data = cambria_optional_uart_data,
++ .num_resources = 2,
++ .resource = cambria_optional_uart_resources,
++};
++
+static struct resource cambria_pata_resources[] = {
+ {
+ .flags = IORESOURCE_MEM
@@ -254,6 +297,20 @@
+ .dev.platform_data = &cambria_gpio_leds_data,
+};
+
++static struct resource cambria_gpio_resources[] = {
++ {
++ .name = "gpio",
++ .flags = 0,
++ },
++};
++
++static struct platform_device cambria_gpio = {
++ .name = "GPIODEV",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(cambria_gpio_resources),
++ .resource = cambria_gpio_resources,
++};
++
+static struct latch_led cambria_latch_leds[] = {
+ {
+ .name = "ledA", /* green led */
@@ -349,6 +406,39 @@
+ },
+};
+
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
++ .gpio_base = 16,
++ .nr_gpio = 8,
++};
++
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
++ .gpio_base = 24,
++ .nr_gpio = 2,
++};
++
++
++static struct gpio_button cambria_gpio_buttons[] = {
++ {
++ .desc = "user",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 2,
++ .gpio = 25,
++ }
++};
++
++static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
++ .poll_interval = 500,
++ .nbuttons = 1,
++ .buttons = cambria_gpio_buttons,
++};
++
++static struct platform_device cambria_gpio_buttons_device = {
++ .name = "gpio-buttons",
++ .id = -1,
++ .dev.platform_data = &cambria_gpio_buttons_data,
++};
++
+static struct platform_device *cambria_devices[] __initdata = {
+ &cambria_i2c_gpio,
+ &cambria_flash,
@@ -357,12 +447,35 @@
+
+static void __init cambria_gw23xx_setup(void)
+{
++ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++ platform_device_register(&cambria_gpio);
+ platform_device_register(&cambria_npec_device);
+ platform_device_register(&cambria_npea_device);
+}
+
+static void __init cambria_gw2350_setup(void)
+{
++ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
++ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
++ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
++ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
++
++ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
++ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
++ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
++ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
++
++ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++ platform_device_register(&cambria_gpio);
++ platform_device_register(&cambria_optional_uart);
+ platform_device_register(&cambria_npec_device);
+ platform_device_register(&cambria_npea_device);
+
@@ -374,6 +487,24 @@
+
+static void __init cambria_gw2358_setup(void)
+{
++ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
++ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
++ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
++ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
++
++ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++ cambria_optional_uart_data[1].mapbase = 0x53F80000;
++ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
++ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
++
++ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
++ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
++ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++ platform_device_register(&cambria_gpio);
++ platform_device_register(&cambria_optional_uart);
++
+ platform_device_register(&cambria_npec_device);
+ platform_device_register(&cambria_npea_device);
+
@@ -382,7 +513,12 @@
+
+ platform_device_register(&cambria_pata);
+
++ cambria_gpio_leds[0].gpio = 24;
++ platform_device_register(&cambria_gpio_leds_device);
++
+ platform_device_register(&cambria_latch_leds_device);
++
++ platform_device_register(&cambria_gpio_buttons_device);
+}
+
+static struct cambria_board_info cambria_boards[] __initdata = {
@@ -451,6 +587,14 @@
+ I2C_BOARD_INFO("24c08", 0x51),
+ .platform_data = &cambria_eeprom_info
+ },
++ {
++ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
++ .platform_data = &gw_i2c_pld_data0,
++ },
++ {
++ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
++ .platform_data = &gw_i2c_pld_data1,
++ },
+};
+
+static void __init cambria_init(void)
diff --git a/target/linux/ixp4xx/patches-3.3/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-3.3/191-cambria_optional_uart.patch
deleted file mode 100644
index 130606fb5f..0000000000
--- a/target/linux/ixp4xx/patches-3.3/191-cambria_optional_uart.patch
+++ /dev/null
@@ -1,96 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -34,6 +34,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/setup.h>
-+#include <linux/irq.h>
-
- struct cambria_board_info {
- unsigned char *model;
-@@ -127,6 +128,45 @@ static struct platform_device cambria_ua
- .resource = &cambria_uart_resource,
- };
-
-+static struct resource cambria_optional_uart_resources[] = {
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 2,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 2,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = cambria_optional_uart_data,
-+ .num_resources = 2,
-+ .resource = cambria_optional_uart_resources,
-+};
-+
- static struct resource cambria_pata_resources[] = {
- {
- .flags = IORESOURCE_MEM
-@@ -283,6 +323,19 @@ static void __init cambria_gw23xx_setup(
-
- static void __init cambria_gw2350_setup(void)
- {
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ platform_device_register(&cambria_optional_uart);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-
-@@ -294,6 +347,19 @@ static void __init cambria_gw2350_setup(
-
- static void __init cambria_gw2358_setup(void)
- {
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53F80000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ platform_device_register(&cambria_optional_uart);
-+
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-
diff --git a/target/linux/ixp4xx/patches-3.3/192-cambria_gpio_device.patch b/target/linux/ixp4xx/patches-3.3/192-cambria_gpio_device.patch
deleted file mode 100644
index d785c3a8ca..0000000000
--- a/target/linux/ixp4xx/patches-3.3/192-cambria_gpio_device.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -214,6 +214,20 @@ static struct platform_device cambria_gp
- .dev.platform_data = &cambria_gpio_leds_data,
- };
-
-+static struct resource cambria_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device cambria_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(cambria_gpio_resources),
-+ .resource = cambria_gpio_resources,
-+};
-+
- static struct latch_led cambria_latch_leds[] = {
- {
- .name = "ledA", /* green led */
-@@ -335,6 +349,11 @@ static void __init cambria_gw2350_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_optional_uart);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-@@ -358,6 +377,10 @@ static void __init cambria_gw2358_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-+ cambria_gpio_resources[0].start = (1 << 14);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_optional_uart);
-
- platform_device_register(&cambria_npec_device);
diff --git a/target/linux/ixp4xx/patches-3.3/193-cambria_pld_gpio.patch b/target/linux/ixp4xx/patches-3.3/193-cambria_pld_gpio.patch
deleted file mode 100644
index 171898d6c7..0000000000
--- a/target/linux/ixp4xx/patches-3.3/193-cambria_pld_gpio.patch
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -12,11 +12,14 @@
- */
-
- #include <linux/device.h>
-+#include <linux/gpio_buttons.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
- #include <linux/if_ether.h>
- #include <linux/init.h>
-+#include <linux/input.h>
- #include <linux/kernel.h>
- #include <linux/leds.h>
- #include <linux/memory.h>
-@@ -323,6 +326,39 @@ static struct platform_device cambria_us
- },
- };
-
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+ .gpio_base = 16,
-+ .nr_gpio = 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+ .gpio_base = 24,
-+ .nr_gpio = 2,
-+};
-+
-+
-+static struct gpio_button cambria_gpio_buttons[] = {
-+ {
-+ .desc = "user",
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .threshold = 2,
-+ .gpio = 25,
-+ }
-+};
-+
-+static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
-+ .poll_interval = 500,
-+ .nbuttons = 1,
-+ .buttons = cambria_gpio_buttons,
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+ .name = "gpio-buttons",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_buttons_data,
-+};
-+
- static struct platform_device *cambria_devices[] __initdata = {
- &cambria_i2c_gpio,
- &cambria_flash,
-@@ -331,6 +367,11 @@ static struct platform_device *cambria_d
-
- static void __init cambria_gw23xx_setup(void)
- {
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
- }
-@@ -377,7 +418,8 @@ static void __init cambria_gw2358_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-- cambria_gpio_resources[0].start = (1 << 14);
-+ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
- cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-
- platform_device_register(&cambria_gpio);
-@@ -391,7 +433,12 @@ static void __init cambria_gw2358_setup(
-
- platform_device_register(&cambria_pata);
-
-+ cambria_gpio_leds[0].gpio = 24;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
- platform_device_register(&cambria_latch_leds_device);
-+
-+ platform_device_register(&cambria_gpio_buttons_device);
- }
-
- static struct cambria_board_info cambria_boards[] __initdata = {
-@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
- I2C_BOARD_INFO("24c08", 0x51),
- .platform_data = &cambria_eeprom_info
- },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+ .platform_data = &gw_i2c_pld_data0,
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+ .platform_data = &gw_i2c_pld_data1,
-+ },
- };
-
- static void __init cambria_init(void)