aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-11-21 21:25:20 +0000
committerJohn Crispin <john@openwrt.org>2015-11-21 21:25:20 +0000
commit0206a400cfd0d1476ef48a6dbc7a7ca08792e019 (patch)
treeebc53bd9a5454378ba884290908d8040598842d9
parent1f514723469720679edae68f529798c02253f803 (diff)
downloadupstream-0206a400cfd0d1476ef48a6dbc7a7ca08792e019.tar.gz
upstream-0206a400cfd0d1476ef48a6dbc7a7ca08792e019.tar.bz2
upstream-0206a400cfd0d1476ef48a6dbc7a7ca08792e019.zip
lantiq: tweak DWC2 default parameters
This patch improves the default configuration of DWC2 on lantiq SoCs somewhat: * Set maximum packet count to largest allowed value by the DWC2 (511) * Use 16-bit DMA bursts * Divide fifo buffers more evenly Default fifo buffer sizes from original ltq-hcd driver seem really irrational. For example according to DWC2 data book rxfifo size of 240 will not fit even a single full length USB packet. On the other hand non-periodic tx fifo size of 240 is more than enough to fit one complete packet. Change the sizes around to improve the situation and to fix some issues especially with isochronous USB transfers. Signed-off-by: Antti Seppälä <a.seppala@gmail.com> SVN-Revision: 47563
-rw-r--r--target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch10
-rw-r--r--target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch10
2 files changed, 10 insertions, 10 deletions
diff --git a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch
index a0af1236f9..2d9cb0f63f 100644
--- a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch
+++ b/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch
@@ -12,11 +12,11 @@
+ .speed = -1,
+ .enable_dynamic_fifo = -1,
+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = 240, /* 240 DWORDs */
-+ .host_nperio_tx_fifo_size = 240, /* 240 DWORDs */
-+ .host_perio_tx_fifo_size = 32, /* 32 DWORDs */
++ .host_rx_fifo_size = 288, /* 288 DWORDs */
++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
++ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
++ .max_packet_count = 511,
+ .host_channels = -1,
+ .phy_type = -1,
+ .phy_utmi_width = -1,
@@ -28,7 +28,7 @@
+ .host_ls_low_power_phy_clk = -1,
+ .ts_dline = -1,
+ .reload_ctl = -1,
-+ .ahbcfg = -1,
++ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
+ .uframe_sched = -1,
+};
+
diff --git a/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch
index c55f5b6821..0b5d09bed2 100644
--- a/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch
+++ b/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch
@@ -12,11 +12,11 @@
+ .speed = -1,
+ .enable_dynamic_fifo = -1,
+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = 240, /* 240 DWORDs */
-+ .host_nperio_tx_fifo_size = 240, /* 240 DWORDs */
-+ .host_perio_tx_fifo_size = 32, /* 32 DWORDs */
++ .host_rx_fifo_size = 288, /* 288 DWORDs */
++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
++ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
++ .max_packet_count = 511,
+ .host_channels = -1,
+ .phy_type = -1,
+ .phy_utmi_width = -1,
@@ -28,7 +28,7 @@
+ .host_ls_low_power_phy_clk = -1,
+ .ts_dline = -1,
+ .reload_ctl = -1,
-+ .ahbcfg = -1,
++ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
+ .uframe_sched = -1,
+};
+