diff options
| author | Gabor Juhos <juhosg@openwrt.org> | 2012-05-02 19:17:59 +0000 |
|---|---|---|
| committer | Gabor Juhos <juhosg@openwrt.org> | 2012-05-02 19:17:59 +0000 |
| commit | b0449ccf04eae59aec6f90493d5a563fa8b15eea (patch) | |
| tree | 86c8cf3400b022299c600f8d178c0275ecdaeff2 | |
| parent | 90e99b9fe893f829e5266ad53ece428ea2f56ccf (diff) | |
| download | upstream-b0449ccf04eae59aec6f90493d5a563fa8b15eea.tar.gz upstream-b0449ccf04eae59aec6f90493d5a563fa8b15eea.tar.bz2 upstream-b0449ccf04eae59aec6f90493d5a563fa8b15eea.zip | |
ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
SVN-Revision: 31557
4 files changed, 16 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 43fda2f172..78c9e945b3 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -82,7 +82,7 @@ get_status_led() { status_led="v22rw-2x2:green:security" ;; w306r-v20) - status_led="w306r:green:sys" + status_led="w306r-v20:green:sys" ;; w502u) status_led="alfa:blue:wps" diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index c987a2567d..43d5726921 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -59,7 +59,6 @@ ramips_setup_interfaces() ;; freestation5 | \ - w306r-v20 | \ wcr-150gn) ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1" ;; diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c index 6235a7329d..7c8eb867cd 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c @@ -20,7 +20,7 @@ #include "devices.h" -#define W306R_V20_GPIO_LED_SYS 9 /* FIXME */ +#define W306R_V20_GPIO_LED_SYS 9 #define W306R_V20_GPIO_LED_WPS 13 #define W306R_V20_GPIO_BUTTON_RESET 10 @@ -57,7 +57,7 @@ static void __init w306r_v20_init(void) rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; rt305x_register_ethernet(); ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio), w306r_v20_leds_gpio); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 88b20fa3d8..ebbc4b2245 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -220,6 +220,18 @@ define BuildFirmware/RTN10PLUS $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size)) endef +define BuildFirmware/W306R_4M + $(call BuildFirmware/w306r,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120) +endef + +define BuildFirmware/w306r + $(call PatchKernelLzma,$(2),$(3)) + mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry)\ + -n 'linkn Kernel Image' \ + -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage + $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(4),$(KDIR)/root.$(1),$(5),$(call imgname,$(1),$(2))-factory.bin) +endef + mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) define BuildFirmware/WHRG300N $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys) @@ -377,6 +389,7 @@ endef define Image/Build/Profile/W306R_V20 $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys) + $(call Image/Build/Template/$(fs_squash)/$(1),W306R_4M,w306r-v20,W306R_V20,ttyS1,57600,phys) endef define Image/Build/Profile/W502U |