aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2018-08-18 12:07:08 +0200
committerMathias Kresin <dev@kresin.me>2018-08-29 09:39:32 +0200
commitc134210b8f7e18b43641b6c2176e7a3e6baed030 (patch)
tree5964505dec49b986ba4b4817d44e770178dc8e8c
parent43df31f64dfc68374093142cd51808655d6e8d50 (diff)
downloadupstream-c134210b8f7e18b43641b6c2176e7a3e6baed030.tar.gz
upstream-c134210b8f7e18b43641b6c2176e7a3e6baed030.tar.bz2
upstream-c134210b8f7e18b43641b6c2176e7a3e6baed030.zip
ramips: drop pointless default led definitions
The LEDs should be triggered/lit by any kind of state change instead of turned on/off unconditional. If LEDs really need to be turned off by default, it should be done via the default-state devicetree led property. The handling of the wndr3700v5 and wt3020 power led is at least strange. Something is for sure wrong with them. Either the leds are misnamed, the default off trigger is a typo or the polarity of the gpios is wrong. Drop the power led from userspace and wait for someone with access to the hardware to fix it properly. Signed-off-by: Mathias Kresin <dev@kresin.me>
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds17
1 files changed, 0 insertions, 17 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index c92712c453..8bf7ef3b1e 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -123,7 +123,6 @@ dcs-930l-b1)
dir-300-b1|\
dir-600-b1|\
dir-620-a1)
- ucidef_set_led_default "wan" "WAN LED (amber)" "$boardname:amber:wan" "1"
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-300-b7|\
@@ -213,7 +212,6 @@ hc5861)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
set_wifi_led "$boardname:blue:wlan2g"
ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0"
- ucidef_set_led_default "turbo" "turbo" "$boardname:blue:turbo" "0"
;;
hg255d)
set_wifi_led "$boardname:green:wlan"
@@ -335,9 +333,6 @@ re350-v1)
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
;;
-re6500)
- ucidef_set_led_default "wifi" "wifi" "$boardname:orange:wifi" "1"
- ;;
rp-n53)
ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
set_wifi_led "$boardname:blue:wifi"
@@ -457,11 +452,6 @@ we1026-5g-16m)
set_wifi_led "we1026-5g:green:wifi"
set_usb_led "we1026-5g:green:usb" "1-1.1"
;;
-whr-1166d|\
-whr-300hp2|\
-whr-600d)
- ucidef_set_led_default "router" "router" "$boardname:green:router" "1"
- ;;
wl-wn575a3)
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
@@ -472,13 +462,6 @@ wrh-300cr)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
;;
-wndr3700v5)
- ucidef_set_led_default "power" "POWER" "$boardname:green:power" "0"
- ;;
-wt3020-4M|\
-wt3020-8M)
- ucidef_set_led_default "power" "power" "wt3020:blue:power" "0"
- ;;
y1)
set_usb_led "$boardname:blue:usb"
ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"