aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGiuseppe Lippolis <giu.lippolis@gmail.com>2018-03-10 10:34:38 +0100
committerMathias Kresin <dev@kresin.me>2018-04-04 08:42:35 +0200
commit6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae (patch)
tree4d91984eefef92212b58ba195df91970e24f86bc
parente9d5f8ebb25721c28a37390081fd4a08c3d0f8d4 (diff)
downloadupstream-6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae.tar.gz
upstream-6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae.tar.bz2
upstream-6525bffc0a7ee6fabfe331a4d9e3eeabdd3516ae.zip
ramips: add support for DLINK DWR-921-C1
The DWR-921-C1 Wireless Routers with LTE embedded modem is based on the MT7620N SoC. Specification: * MediaTek MT7620N (580 Mhz) * 64 MB of RAM * 16 MB of FLASH * 802.11bgn radio * 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) * 2x external, detachable (LTE) antennas * UART header on PCB (57600 8n1) * 6x LED (GPIO-controlled) * 1x bi-color Signal Strength LED (GPIO-controlled) * 2x button * JBOOT bootloader The status led has been assigned to the dwr-921-c1:green:sigstrength (lte signal strength) led. At the end of the boot it is switched off and is available for lte operation. Work correctly also during sysupgrade operation. Installation: Apply factory image via d-link http web-gui. How to revert to OEM firmware: 1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.) 2.) Upload original factory image via JBOOT http (IP: 192.168.123.254) 3.) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is name of firmware file. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ramips/dts/DWR-921-C1.dts144
-rw-r--r--target/linux/ramips/image/mt7620.mk16
7 files changed, 175 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 4b8242cb9f..a34abbb69f 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -162,6 +162,11 @@ dlink,dwr-116-a1|\
mzk-ex300np)
set_wifi_led "$boardname:green:wifi"
;;
+dlink,dwr-921-c1)
+ set_wifi_led "$boardname:green:wifi"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
+ ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
+ ;;
dir-810l|\
mzk-750dhp|\
mzk-dp150n|\
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4441b2293e..8f3a95d3e3 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -81,6 +81,7 @@ ramips_setup_interfaces()
dir-610-a1|\
dir-615-h1|\
dlink,dwr-116-a1|\
+ dlink,dwr-921-c1|\
ew1200|\
firewrt|\
hc5661a|\
@@ -434,7 +435,8 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_ascii factory lanmac)
wan_mac=$(mtd_get_mac_ascii factory wanmac)
;;
- dlink,dwr-116-a1)
+ dlink,dwr-116-a1|\
+ dlink,dwr-921-c1)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index d9f131b2a8..7b90f6ba12 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -108,6 +108,9 @@ get_status_led() {
zbt-wg2626)
status_led="$boardname:green:status"
;;
+ dlink,dwr-921-c1)
+ status_led="$boardname:green:sigstrength"
+ ;;
asl26555-8M|\
asl26555-16M)
status_led="asl26555:green:power"
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 67c05c9a46..c0c6a3ecad 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -54,7 +54,8 @@ board=$(board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")
case $board in
- dlink,dwr-116-a1)
+ dlink,dwr-116-a1|\
+ dlink,dwr-921-c1)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
wifi_mac=$(macaddr_add "$wan_mac" 1)
jboot_eeprom_extract "config" 0xE000
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index b052cf8625..44be484374 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -271,7 +271,8 @@ platform_check_image() {
}
return 0
;;
- dlink,dwr-116-a1)
+ dlink,dwr-116-a1|\
+ dlink,dwr-921-c1)
[ "$magic" != "0404242b" ] && {
echo "Invalid image type."
return 1
diff --git a/target/linux/ramips/dts/DWR-921-C1.dts b/target/linux/ramips/dts/DWR-921-C1.dts
new file mode 100644
index 0000000000..dbcbc17d84
--- /dev/null
+++ b/target/linux/ramips/dts/DWR-921-C1.dts
@@ -0,0 +1,144 @@
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc";
+ model = "D-Link DWR-921 C1";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ sms {
+ label = "dwr-921-c1:green:sms";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "dwr-921-c1:green:lan";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ sstrengthg {
+ label = "dwr-921-c1:green:sigstrength";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ sstrengthr {
+ label = "dwr-921-c1:red:sigstrength";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g {
+ label = "dwr-921-c1:green:4g";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "dwr-921-c1:green:3g";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "dwr-921-c1:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ lte_modem_enable {
+ gpio-export,name = "lte_modem_enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ port@4 {
+ status = "okay";
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "spi refclk", "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index b352c5408d..185a081c90 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -162,6 +162,22 @@ define Device/dlink_dwr-116-a1
endef
TARGET_DEVICES += dlink_dwr-116-a1
+define Device/dlink_dwr-921-c1
+ DTS := DWR-921-C1
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := D-Link DWR-921 C1
+ DLINK_ROM_ID := DLK6E2414001
+ DLINK_FAMILY_MEMBER := 0x6E24
+ DLINK_FIRMWARE_SIZE := 0xFE0000
+ KERNEL := $(KERNEL_DTB)
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata
+ IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory
+ DEVICE_PACKAGES := jboot-tools \
+ kmod-usb2 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += dlink_dwr-921-c1
+
define Device/e1700
DTS := E1700
IMAGES += factory.bin