aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndrew Cameron <apcameron@softhome.net>2019-06-26 16:40:54 -0500
committerPetr Štetiar <ynezz@true.cz>2019-07-18 00:06:55 +0200
commitcad4132e003cecc386d791d552ddba42c182c216 (patch)
treea6f75df7a4fd997bc14e750c5a08621ad4880d8e
parent8e384ba8307742b54b2be326697a5dc2dec6880b (diff)
downloadupstream-cad4132e003cecc386d791d552ddba42c182c216.tar.gz
upstream-cad4132e003cecc386d791d552ddba42c182c216.tar.bz2
upstream-cad4132e003cecc386d791d552ddba42c182c216.zip
ath79: add support for TP-Link CPE510-v2/v3
TP-Link CPE510-v2/v3 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, and 4 green LEDs - 1 10/100Mbps Shielded Ethernet Port (Passive PoE in) - Built-in 13dBi 2x2 dual-polarized directional MIMO antenna - Adjustable transmission power from 0 to 23dBm/200mw Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net> [whitespace fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds9
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/dts/ar9344_tplink_cpe510-v2.dts9
-rw-r--r--target/linux/ath79/dts/ar9344_tplink_cpe510-v3.dts9
-rw-r--r--target/linux/ath79/dts/ar9344_tplink_cpe510.dtsi152
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk34
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c85
7 files changed, 300 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 238dda18f6..0cb03db4be 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -158,6 +158,15 @@ tplink,cpe210-v3)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
;;
+tplink,cpe510-v2|\
+tplink,cpe510-v3)
+ ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
+ ;;
tplink,cpe610-v1)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 2413b1f4bc..1d4cec025a 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -28,6 +28,8 @@ ath79_setup_interfaces()
pqi,air-pen|\
tplink,cpe210-v2|\
tplink,cpe210-v3|\
+ tplink,cpe510-v2|\
+ tplink,cpe510-v3|\
tplink,cpe610-v1|\
tplink,re350k-v1|\
tplink,re355-v1|\
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe510-v2.dts
new file mode 100644
index 0000000000..758d0c02f0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe510-v2.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpe510.dtsi"
+
+/ {
+ compatible = "tplink,cpe510-v2", "qca,ar9344";
+ model = "TP-Link CPE510 v2";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510-v3.dts b/target/linux/ath79/dts/ar9344_tplink_cpe510-v3.dts
new file mode 100644
index 0000000000..0909fcfa73
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe510-v3.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpe510.dtsi"
+
+/ {
+ compatible = "tplink,cpe510-v3", "qca,ar9344";
+ model = "TP-Link CPE510 v3";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe510.dtsi
new file mode 100644
index 0000000000..f19ef01d49
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe510.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ aliases {
+ led-boot = &system;
+ led-failsafe = &system;
+ led-running = &system;
+ led-upgrade = &system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ link1 {
+ label = "tp-link:green:link1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "tp-link:green:link2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "tp-link:green:link3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ system: link4 {
+ label = "tp-link:green:link4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0x780000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x000000 0x200000>;
+ };
+
+ partition@200000 {
+ label = "rootfs";
+ reg = <0x200000 0x580000>;
+ };
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x030000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x08>;
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x08>;
+
+ phy-mode = "mii";
+ phy-handle = <&swphy4>;
+};
+
+&eth1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index f1424d02ee..312ce78f22 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -159,6 +159,40 @@ define Device/tplink_cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3
+define Device/tplink_cpe510-v2
+ $(Device/tplink-safeloader)
+ ATH_SOC := ar9344
+ IMAGE_SIZE := 7680k
+ DEVICE_MODEL := CPE510
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := rssileds
+ TPLINK_BOARD_ID := CPE510V2
+ LOADER_TYPE := elf
+ LOADER_FLASH_OFFS := 0x43000
+ COMPILE := loader-$(1).elf
+ COMPILE/loader-$(1).elf := loader-okli-compile
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
+ SUPPORTED_DEVICES += cpe510-v2
+endef
+TARGET_DEVICES += tplink_cpe510-v2
+
+define Device/tplink_cpe510-v3
+ $(Device/tplink-safeloader)
+ ATH_SOC := ar9344
+ IMAGE_SIZE := 7680k
+ DEVICE_MODEL := CPE510
+ DEVICE_VARIANT := v3
+ DEVICE_PACKAGES := rssileds
+ TPLINK_BOARD_ID := CPE510V3
+ LOADER_TYPE := elf
+ LOADER_FLASH_OFFS := 0x43000
+ COMPILE := loader-$(1).elf
+ COMPILE/loader-$(1).elf := loader-okli-compile
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
+ SUPPORTED_DEVICES += cpe510-v3
+endef
+TARGET_DEVICES += tplink_cpe510-v3
+
define Device/tplink_cpe610-v1
$(Device/tplink-safeloader)
ATH_SOC := ar9344
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 773e7ed26c..cfd3645950 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -278,6 +278,91 @@ static struct device_info boards[] = {
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},
+
+ /** Firmware layout for the CPE510 V2 */
+ {
+ .id = "CPE510V2",
+ .vendor = "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
+ .support_list =
+ "SupportList:\r\n"
+ "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
+ "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
+ "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
+ "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
+ "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
+ "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
+ "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
+ "CPE510(TP-LINK|US|N300-5):2.0\r\n",
+ .support_trail = '\xff',
+ .soft_ver = NULL,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"partition-table", 0x20000, 0x02000},
+ {"default-mac", 0x30000, 0x00020},
+ {"product-info", 0x31100, 0x00100},
+ {"signature", 0x32000, 0x00400},
+ {"os-image", 0x40000, 0x200000},
+ {"file-system", 0x240000, 0x570000},
+ {"soft-version", 0x7b0000, 0x00100},
+ {"support-list", 0x7b1000, 0x00400},
+ {"user-config", 0x7c0000, 0x10000},
+ {"default-config", 0x7d0000, 0x10000},
+ {"log", 0x7e0000, 0x10000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "support-list",
+ },
+
+ /** Firmware layout for the CPE510 V3 */
+ {
+ .id = "CPE510V3",
+ .vendor = "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
+ .support_list =
+ "SupportList:\r\n"
+ "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
+ "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
+ "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
+ "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
+ "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
+ "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
+ "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
+ "CPE510(TP-LINK|US|N300-5):3.0\r\n",
+ .support_trail = '\xff',
+ .soft_ver = NULL,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"partition-table", 0x20000, 0x02000},
+ {"default-mac", 0x30000, 0x00020},
+ {"product-info", 0x31100, 0x00100},
+ {"signature", 0x32000, 0x00400},
+ {"os-image", 0x40000, 0x200000},
+ {"file-system", 0x240000, 0x570000},
+ {"soft-version", 0x7b0000, 0x00100},
+ {"support-list", 0x7b1000, 0x00400},
+ {"user-config", 0x7c0000, 0x10000},
+ {"default-config", 0x7d0000, 0x10000},
+ {"log", 0x7e0000, 0x10000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "support-list",
+ },
+
/** Firmware layout for the CPE610V1 */
{
.id = "CPE610V1",