aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRosen Penev <rosenp@gmail.com>2018-02-04 16:24:15 -0800
committerJohn Crispin <john@phrozen.org>2018-02-13 10:01:52 +0100
commitc60a21532bc903ab86d971b478752152d4476ef8 (patch)
tree4c1a4b49aef72a50d4ef72ef3215be1aa96713f4
parent2d27ebbb9338c114b3b5403cd4eb6fc05ef1ed6a (diff)
downloadupstream-c60a21532bc903ab86d971b478752152d4476ef8.tar.gz
upstream-c60a21532bc903ab86d971b478752152d4476ef8.tar.bz2
upstream-c60a21532bc903ab86d971b478752152d4476ef8.zip
ramips: Add support for the GnuBee Personal Cloud Two
The GnuBee Personal Cloud Two crowdfunded on https://www.crowdsupply.com It is a low-cost, low-power, network-attached storage device. Specifications: - SoC: MediaTek MT7621AT - RAM: DDR3 512 MB - Flash: 32 MB - Six SATA ports for 3.5" Drives - One SDcard - One USB 3.0 - Two USB 2.0 - Gigabit Ethernet: Three Ports - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1 - Three GPIOs available on a pin header Flash instructions: The GnuBee Personal Cloud Two ships with libreCMC installed. libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt. As such one can upgrade using the webinterface or sysupgrade. Das U-Boot has multiple options for recovery or updates including : - USB - http - tftp Errata: - While there are three ethernet ports, the third requires support for the second GMAC. This will come in kernel 4.14. - The first hard drive slot has a clearance issue with the two fan headers. Workaround is to pull the headers out and connect the pins to jumper wires. - Using this device as a NAS is problematic with the 4.9 kernel as many /dev/sdX reads throw silent errors. The current theory behind this is some kind of unhandled DMA mapping error in the kernel. This is not an issue with kernel 4.4. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/GB-PC2.dts137
-rw-r--r--target/linux/ramips/image/mt7621.mk8
7 files changed, 160 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 677bf95a27..573dd31c64 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -191,6 +191,12 @@ gb-pc1)
ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
;;
+gb-pc2)
+ ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x01"
+ ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x10"
+ ucidef_set_led_netdev "eth1-g" "eth1-g" "$board:green:eth1-g" "eth1"
+ ucidef_set_led_netdev "eth1-y" "eth1-y" "$board:green:eth1-y" "eth1"
+ ;;
gl-mt300a|\
gl-mt300n|\
gl-mt750)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index d064bfef3b..1ccff892b1 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -206,6 +206,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "4:lan" "6@eth0"
;;
+ gb-pc2)
+ ucidef_add_switch "switch0" \
+ "4:lan" "0:wan" "6@eth0"
+ ;;
gl-mt300n-v2)
ucidef_add_switch "switch0" \
"1:lan" "0:wan" "6@eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 6b11fb2872..e38311d5e5 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -91,6 +91,7 @@ get_status_led() {
dir-620-d1|\
dwr-512-b|\
gb-pc1|\
+ gb-pc2|\
hpm|\
hw550-3g|\
mac1200rv2|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 75474fbc6d..74ed5913b8 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -205,6 +205,9 @@ ramips_board_detect() {
*"GB-PC1")
name="gb-pc1"
;;
+ *"GB-PC2")
+ name="gb-pc2"
+ ;;
*"GL-MT300A")
name="gl-mt300a"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 45e141de02..ab538db108 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -61,6 +61,7 @@ platform_check_image() {
fonera20n|\
freestation5|\
gb-pc1|\
+ gb-pc2|\
gl-mt300a|\
gl-mt300n|\
gl-mt750|\
diff --git a/target/linux/ramips/dts/GB-PC2.dts b/target/linux/ramips/dts/GB-PC2.dts
new file mode 100644
index 0000000000..f31ac2b843
--- /dev/null
+++ b/target/linux/ramips/dts/GB-PC2.dts
@@ -0,0 +1,137 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
+ model = "GB-PC2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus: palmbus@1E000000 {
+ i2c@900 {
+ status = "okay";
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "gb-pc2:green:system";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ status {
+ label = "gb-pc2:green:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "gb-pc2:green:lan";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "gb-pc2:green:wan";
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+
+ eth1-y {
+ label = "gb-pc2:yellow:eth1-y";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ eth1-g {
+ label = "gb-pc2:green:eth1-g";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&cpuclock {
+ compatible = "fixed-clock";
+ clock-frequency = <900000000>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart3";
+ ralink,function = "gpio";
+ };
+ };
+};
+
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 8ba65a1af2..f0b5a8444f 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -83,6 +83,14 @@ define Device/gb-pc1
endef
TARGET_DEVICES += gb-pc1
+define Device/gb-pc2
+ DTS := GB-PC2
+ DEVICE_TITLE := GnuBee Personal Cloud Two
+ DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+endef
+TARGET_DEVICES += gb-pc2
+
define Device/hc5962
DTS := HC5962
BLOCKSIZE := 128k