aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2016-04-09 10:25:08 +0000
committerJohn Crispin <john@openwrt.org>2016-04-09 10:25:08 +0000
commit8bda1ae2cc3529ecca307a658570a9c11967d9b0 (patch)
tree3cd50d839f1b8c9f2b99b3149d15039c3f3dbf60
parent8b8dfeb027c820c7264b7ffb724d58911bf8ae42 (diff)
downloadupstream-8bda1ae2cc3529ecca307a658570a9c11967d9b0.tar.gz
upstream-8bda1ae2cc3529ecca307a658570a9c11967d9b0.tar.bz2
upstream-8bda1ae2cc3529ecca307a658570a9c11967d9b0.zip
mediatek: update patches
adds a few ethernet fixes Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 49132
-rw-r--r--target/linux/mediatek/patches-4.4/0001-NET-multi-phy-support.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0002-soc-mediatek-Separate-scpsys-driver-common-code.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0003-soc-mediatek-Init-MT8173-scpsys-driver-earlier.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0004-soc-mediatek-Add-MT2701-power-dt-bindings.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0005-soc-mediatek-Add-MT2701-MT7623-scpsys-driver.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0006-clk-mediatek-Refine-the-makefile-to-support-multiple.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0007-dt-bindings-ARM-Mediatek-Document-bindings-for-MT270.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0008-clk-mediatek-Add-dt-bindings-for-MT2701-clocks.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0009-clk-mediatek-Add-MT2701-clock-support.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0010-reset-mediatek-mt2701-reset-controller-dt-binding-fi.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0011-reset-mediatek-mt2701-reset-driver.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0012-ARM-mediatek-Add-MT2701-config-options-for-mediatek-.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0013-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt2.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0014-pinctrl-dt-bindings-Add-pinfunc-header-file-for-mt27.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0015-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt7.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0016-pinctrl-dt-bindings-Add-pinctrl-file-for-mt7623.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0017-clk-add-hifsys-reset.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0018-dt-bindings-Add-a-binding-for-Mediatek-xHCI-host-con.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0020-arm64-dts-mediatek-add-xHCI-usb-phy-for-mt8173.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0021-Document-DT-Add-bindings-for-mediatek-MT7623-SoC-Pla.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0022-soc-mediatek-add-compat-string-for-mt7623-to-scpsys.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0023-ARM-dts-mediatek-add-MT7623-basic-support.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0024-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0025-PCI-mediatek-add-support-for-PCIe-found-on-MT7623-MT.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0026-scpsys-various-fixes.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0027-soc-mediatek-PMIC-wrap-Clear-the-vldclr-if-state-mac.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0028-ARM-mediatek-add-MT7623-smp-bringup-code.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0029-soc-mediatek-PMIC-wrap-clear-the-STAUPD_TRIG-bit-of-.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0030-ARM-mediatek-add-mt2701-smp-bringup-code.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0031-dt-bindings-ARM-Mediatek-add-MT2701-7623-string-to-t.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0032-soc-mediatek-PMIC-wrap-don-t-duplicate-the-wrapper-d.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0033-soc-mediatek-PMIC-wrap-add-wrapper-callbacks-for-ini.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0034-soc-mediatek-PMIC-wrap-split-SoC-specific-init-into-.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0035-soc-mediatek-PMIC-wrap-WRAP_INT_EN-needs-a-different.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0036-soc-mediatek-PMIC-wrap-SPI_WRITE-needs-a-different-b.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0037-soc-mediatek-PMIC-wrap-move-wdt_src-into-the-pmic_wr.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0038-soc-mediatek-PMIC-wrap-remove-pwrap_is_mt8135-and-pw.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0039-soc-mediatek-PMIC-wrap-add-a-slave-specific-struct.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0040-soc-mediatek-PMIC-wrap-add-mt6323-slave-support.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0041-soc-mediatek-PMIC-wrap-add-MT2701-7623-support.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0042-dt-bindings-mfd-Add-bindings-for-the-MediaTek-MT6323.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0043-mfd-mt6397-int_con-and-int_status-may-vary-in-locati.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0044-mfd-mt6397-add-support-for-different-Slave-types.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0045-mfd-mt6397-add-MT6323-support-to-MT6397-driver.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0046-regulator-Add-document-for-MT6323-regulator.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0047-regulator-mt6323-Add-support-for-MT6323-regulator.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0048-net-next-mediatek-document-MediaTek-SoC-ethernet-bin.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0049-net-next-mediatek-add-support-for-MT7623-ethernet.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0050-net-next-mediatek-add-Kconfig-and-Makefile.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0052-mtd-nand-add-an-mtd_to_nand-helper.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0053-mtd-nand-add-nand_to_mtd-helper.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0054-mtd-nand-add-helpers-to-access-priv.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0055-mtd-nand-embed-an-mtd_info-structure-into-nand_chip.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0056-mtd-add-get-set-of_node-flash_node-helpers.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0058-mtd-mediatek-driver-for-MTK-Smart-Device-Gen1-NAND.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0059-mtd-nand-backport-fixes.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0060-net-mediatek-checking-for-IS_ERR-instead-of-NULL.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0061-net-mediatek-unlock-on-error-in-mtk_tx_map.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0062-net-mediatek-use-dma_addr_t-correctly.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0063-net-mediatek-remove-incorrect-dma_mask-assignment.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0064-net-mediatek-check-device_reset-return-code.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0065-net-mediatek-watchdog_timeo-was-not-set.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0066-net-mediatek-mtk_cal_txd_req-returns-bad-value.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0067-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0068-net-mediatek-remove-superflous-reset-call.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0069-net-mediatek-fix-stop-and-wakeup-of-queue.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0070-net-mediatek-fix-mtk_pending_work.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0071-net-mediatek-fix-TX-locking.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0072-net-mediatek-move-the-pending_work-struct-to-the-dev.patch2
-rw-r--r--target/linux/mediatek/patches-4.4/0073-net-next-mediatek-add-support-for-IRQ-grouping.patch314
-rw-r--r--target/linux/mediatek/patches-4.4/0074-net-mediatek-out-of-tree-fixes.patch2600
-rw-r--r--target/linux/mediatek/patches-4.4/0075-clk-mediatek-enable-critical-clocks.patch74
-rw-r--r--target/linux/mediatek/patches-4.4/0076-clk-mediatek-Export-CPU-mux-clocks-for-CPU-frequency.patch306
-rw-r--r--target/linux/mediatek/patches-4.4/0077-cpufreq-mediatek-add-driver.patch727
-rw-r--r--target/linux/mediatek/patches-4.4/0078-arm-mediatek-make-a7-timer-work.patch52
78 files changed, 72 insertions, 4145 deletions
diff --git a/target/linux/mediatek/patches-4.4/0001-NET-multi-phy-support.patch b/target/linux/mediatek/patches-4.4/0001-NET-multi-phy-support.patch
index 007c03c688..18f7463c1b 100644
--- a/target/linux/mediatek/patches-4.4/0001-NET-multi-phy-support.patch
+++ b/target/linux/mediatek/patches-4.4/0001-NET-multi-phy-support.patch
@@ -1,7 +1,7 @@
From c30a296646a42302065ba452abe95b0b4b550883 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 01/78] NET: multi phy support
+Subject: [PATCH 01/81] NET: multi phy support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/mediatek/patches-4.4/0002-soc-mediatek-Separate-scpsys-driver-common-code.patch b/target/linux/mediatek/patches-4.4/0002-soc-mediatek-Separate-scpsys-driver-common-code.patch
index b0e4d29931..dca76c2a1b 100644
--- a/target/linux/mediatek/patches-4.4/0002-soc-mediatek-Separate-scpsys-driver-common-code.patch
+++ b/target/linux/mediatek/patches-4.4/0002-soc-mediatek-Separate-scpsys-driver-common-code.patch
@@ -1,7 +1,7 @@
From 2c93328ed05061a50e3bd4111379dbcf6946d3ac Mon Sep 17 00:00:00 2001
From: James Liao <jamesjj.liao@mediatek.com>
Date: Wed, 30 Dec 2015 14:41:43 +0800
-Subject: [PATCH 02/78] soc: mediatek: Separate scpsys driver common code
+Subject: [PATCH 02/81] soc: mediatek: Separate scpsys driver common code
Separate scpsys driver common code to mtk-scpsys.c, and move MT8173
platform code to mtk-scpsys-mt8173.c.
diff --git a/target/linux/mediatek/patches-4.4/0003-soc-mediatek-Init-MT8173-scpsys-driver-earlier.patch b/target/linux/mediatek/patches-4.4/0003-soc-mediatek-Init-MT8173-scpsys-driver-earlier.patch
index 7d77391cc5..d35fe84fb7 100644
--- a/target/linux/mediatek/patches-4.4/0003-soc-mediatek-Init-MT8173-scpsys-driver-earlier.patch
+++ b/target/linux/mediatek/patches-4.4/0003-soc-mediatek-Init-MT8173-scpsys-driver-earlier.patch
@@ -1,7 +1,7 @@
From c359272f86805259c5801385d60fdeea9d629cf9 Mon Sep 17 00:00:00 2001
From: James Liao <jamesjj.liao@mediatek.com>
Date: Wed, 30 Dec 2015 14:41:44 +0800
-Subject: [PATCH 03/78] soc: mediatek: Init MT8173 scpsys driver earlier
+Subject: [PATCH 03/81] soc: mediatek: Init MT8173 scpsys driver earlier
Some power domain comsumers may init before module_init.
So the power domain provider (scpsys) need to be initialized
diff --git a/target/linux/mediatek/patches-4.4/0004-soc-mediatek-Add-MT2701-power-dt-bindings.patch b/target/linux/mediatek/patches-4.4/0004-soc-mediatek-Add-MT2701-power-dt-bindings.patch
index c0bb55bf9a..f4899c71b3 100644
--- a/target/linux/mediatek/patches-4.4/0004-soc-mediatek-Add-MT2701-power-dt-bindings.patch
+++ b/target/linux/mediatek/patches-4.4/0004-soc-mediatek-Add-MT2701-power-dt-bindings.patch
@@ -1,7 +1,7 @@
From f371844374fff273f817d6c43f679606417af59e Mon Sep 17 00:00:00 2001
From: Shunli Wang <shunli.wang@mediatek.com>
Date: Wed, 30 Dec 2015 14:41:45 +0800
-Subject: [PATCH 04/78] soc: mediatek: Add MT2701 power dt-bindings
+Subject: [PATCH 04/81] soc: mediatek: Add MT2701 power dt-bindings
Add power dt-bindings for MT2701.
diff --git a/target/linux/mediatek/patches-4.4/0005-soc-mediatek-Add-MT2701-MT7623-scpsys-driver.patch b/target/linux/mediatek/patches-4.4/0005-soc-mediatek-Add-MT2701-MT7623-scpsys-driver.patch
index b2527b4772..f00775e87b 100644
--- a/target/linux/mediatek/patches-4.4/0005-soc-mediatek-Add-MT2701-MT7623-scpsys-driver.patch
+++ b/target/linux/mediatek/patches-4.4/0005-soc-mediatek-Add-MT2701-MT7623-scpsys-driver.patch
@@ -1,7 +1,7 @@
From c6711565985f359d7d3c05f01f081e4c216902de Mon Sep 17 00:00:00 2001
From: Shunli Wang <shunli.wang@mediatek.com>
Date: Wed, 30 Dec 2015 14:41:46 +0800
-Subject: [PATCH 05/78] soc: mediatek: Add MT2701/MT7623 scpsys driver
+Subject: [PATCH 05/81] soc: mediatek: Add MT2701/MT7623 scpsys driver
Add scpsys driver for MT2701 and MT7623.
diff --git a/target/linux/mediatek/patches-4.4/0006-clk-mediatek-Refine-the-makefile-to-support-multiple.patch b/target/linux/mediatek/patches-4.4/0006-clk-mediatek-Refine-the-makefile-to-support-multiple.patch
index 5ac02deea4..b9b9530d77 100644
--- a/target/linux/mediatek/patches-4.4/0006-clk-mediatek-Refine-the-makefile-to-support-multiple.patch
+++ b/target/linux/mediatek/patches-4.4/0006-clk-mediatek-Refine-the-makefile-to-support-multiple.patch
@@ -1,7 +1,7 @@
From 0c39bcd17fa6ce723f56ad3756b4bb36c4690342 Mon Sep 17 00:00:00 2001
From: James Liao <jamesjj.liao@mediatek.com>
Date: Tue, 5 Jan 2016 14:30:17 +0800
-Subject: [PATCH 06/78] clk: mediatek: Refine the makefile to support multiple
+Subject: [PATCH 06/81] clk: mediatek: Refine the makefile to support multiple
clock drivers
Add a Kconfig to define clock configuration for each SoC, and
diff --git a/target/linux/mediatek/patches-4.4/0007-dt-bindings-ARM-Mediatek-Document-bindings-for-MT270.patch b/target/linux/mediatek/patches-4.4/0007-dt-bindings-ARM-Mediatek-Document-bindings-for-MT270.patch
index 382699995b..ebca25b926 100644
--- a/target/linux/mediatek/patches-4.4/0007-dt-bindings-ARM-Mediatek-Document-bindings-for-MT270.patch
+++ b/target/linux/mediatek/patches-4.4/0007-dt-bindings-ARM-Mediatek-Document-bindings-for-MT270.patch
@@ -1,7 +1,7 @@
From d7e96f87f66c571e9f4171ecd89c656fbd2de89b Mon Sep 17 00:00:00 2001
From: James Liao <jamesjj.liao@mediatek.com>
Date: Tue, 5 Jan 2016 14:30:18 +0800
-Subject: [PATCH 07/78] dt-bindings: ARM: Mediatek: Document bindings for
+Subject: [PATCH 07/81] dt-bindings: ARM: Mediatek: Document bindings for
MT2701
This patch adds the binding documentation for apmixedsys, bdpsys,
diff --git a/target/linux/mediatek/patches-4.4/0008-clk-mediatek-Add-dt-bindings-for-MT2701-clocks.patch b/target/linux/mediatek/patches-4.4/0008-clk-mediatek-Add-dt-bindings-for-MT2701-clocks.patch
index f88cd18a1e..66de8db02f 100644
--- a/target/linux/mediatek/patches-4.4/0008-clk-mediatek-Add-dt-bindings-for-MT2701-clocks.patch
+++ b/target/linux/mediatek/patches-4.4/0008-clk-mediatek-Add-dt-bindings-for-MT2701-clocks.patch
@@ -1,7 +1,7 @@
From 2fcbc15da2f13164e0851b9c7fae290249f0b44d Mon Sep 17 00:00:00 2001
From: Shunli Wang <shunli.wang@mediatek.com>
Date: Tue, 5 Jan 2016 14:30:19 +0800
-Subject: [PATCH 08/78] clk: mediatek: Add dt-bindings for MT2701 clocks
+Subject: [PATCH 08/81] clk: mediatek: Add dt-bindings for MT2701 clocks
Add MT2701 clock dt-bindings, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
diff --git a/target/linux/mediatek/patches-4.4/0009-clk-mediatek-Add-MT2701-clock-support.patch b/target/linux/mediatek/patches-4.4/0009-clk-mediatek-Add-MT2701-clock-support.patch
index 7256eab494..2994b8942d 100644
--- a/target/linux/mediatek/patches-4.4/0009-clk-mediatek-Add-MT2701-clock-support.patch
+++ b/target/linux/mediatek/patches-4.4/0009-clk-mediatek-Add-MT2701-clock-support.patch
@@ -1,7 +1,7 @@
From f2c07eaa2df52f9acac9ffc3457d3d81079dd723 Mon Sep 17 00:00:00 2001
From: Shunli Wang <shunli.wang@mediatek.com>
Date: Tue, 5 Jan 2016 14:30:20 +0800
-Subject: [PATCH 09/78] clk: mediatek: Add MT2701 clock support
+Subject: [PATCH 09/81] clk: mediatek: Add MT2701 clock support
Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
diff --git a/target/linux/mediatek/patches-4.4/0010-reset-mediatek-mt2701-reset-controller-dt-binding-fi.patch b/target/linux/mediatek/patches-4.4/0010-reset-mediatek-mt2701-reset-controller-dt-binding-fi.patch
index 4e3686bb62..09ddd4eda3 100644
--- a/target/linux/mediatek/patches-4.4/0010-reset-mediatek-mt2701-reset-controller-dt-binding-fi.patch
+++ b/target/linux/mediatek/patches-4.4/0010-reset-mediatek-mt2701-reset-controller-dt-binding-fi.patch
@@ -1,7 +1,7 @@
From 8d134cbe750b59d15c591622d81e2e9daa09f0c4 Mon Sep 17 00:00:00 2001
From: Shunli Wang <shunli.wang@mediatek.com>
Date: Tue, 5 Jan 2016 14:30:21 +0800
-Subject: [PATCH 10/78] reset: mediatek: mt2701 reset controller dt-binding
+Subject: [PATCH 10/81] reset: mediatek: mt2701 reset controller dt-binding
file
Dt-binding file about reset controller is used to provide
diff --git a/target/linux/mediatek/patches-4.4/0011-reset-mediatek-mt2701-reset-driver.patch b/target/linux/mediatek/patches-4.4/0011-reset-mediatek-mt2701-reset-driver.patch
index 7f4d066ca4..2493cb1fb3 100644
--- a/target/linux/mediatek/patches-4.4/0011-reset-mediatek-mt2701-reset-driver.patch
+++ b/target/linux/mediatek/patches-4.4/0011-reset-mediatek-mt2701-reset-driver.patch
@@ -1,7 +1,7 @@
From b86d3303db25a8296e4c3de46ee1470f60f71b0c Mon Sep 17 00:00:00 2001
From: Shunli Wang <shunli.wang@mediatek.com>
Date: Tue, 5 Jan 2016 14:30:22 +0800
-Subject: [PATCH 11/78] reset: mediatek: mt2701 reset driver
+Subject: [PATCH 11/81] reset: mediatek: mt2701 reset driver
In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
diff --git a/target/linux/mediatek/patches-4.4/0012-ARM-mediatek-Add-MT2701-config-options-for-mediatek-.patch b/target/linux/mediatek/patches-4.4/0012-ARM-mediatek-Add-MT2701-config-options-for-mediatek-.patch
index 1c52c15732..d8bc365cad 100644
--- a/target/linux/mediatek/patches-4.4/0012-ARM-mediatek-Add-MT2701-config-options-for-mediatek-.patch
+++ b/target/linux/mediatek/patches-4.4/0012-ARM-mediatek-Add-MT2701-config-options-for-mediatek-.patch
@@ -1,7 +1,7 @@
From 3b5df542d52b13a1b20d25311fa4c4029a3b83af Mon Sep 17 00:00:00 2001
From: Erin Lo <erin.lo@mediatek.com>
Date: Mon, 28 Dec 2015 15:09:02 +0800
-Subject: [PATCH 12/78] ARM: mediatek: Add MT2701 config options for mediatek
+Subject: [PATCH 12/81] ARM: mediatek: Add MT2701 config options for mediatek
SoCs.
The upcoming MTK pinctrl driver have a big pin table for each SoC
diff --git a/target/linux/mediatek/patches-4.4/0013-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt2.patch b/target/linux/mediatek/patches-4.4/0013-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt2.patch
index 715ca08397..365212e1ed 100644
--- a/target/linux/mediatek/patches-4.4/0013-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt2.patch
+++ b/target/linux/mediatek/patches-4.4/0013-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt2.patch
@@ -1,7 +1,7 @@
From 1a254735cad9db5c8605c972b0f16b3929dc0d6e Mon Sep 17 00:00:00 2001
From: Biao Huang <biao.huang@mediatek.com>
Date: Mon, 28 Dec 2015 15:09:03 +0800
-Subject: [PATCH 13/78] dt-bindings: mediatek: Modify pinctrl bindings for
+Subject: [PATCH 13/81] dt-bindings: mediatek: Modify pinctrl bindings for
mt2701
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
diff --git a/target/linux/mediatek/patches-4.4/0014-pinctrl-dt-bindings-Add-pinfunc-header-file-for-mt27.patch b/target/linux/mediatek/patches-4.4/0014-pinctrl-dt-bindings-Add-pinfunc-header-file-for-mt27.patch
index e97ddb1300..8ac174a420 100644
--- a/target/linux/mediatek/patches-4.4/0014-pinctrl-dt-bindings-Add-pinfunc-header-file-for-mt27.patch
+++ b/target/linux/mediatek/patches-4.4/0014-pinctrl-dt-bindings-Add-pinfunc-header-file-for-mt27.patch
@@ -1,7 +1,7 @@
From 416720ba33d4fd7d3166c17be7c13651cc08d408 Mon Sep 17 00:00:00 2001
From: Biao Huang <biao.huang@mediatek.com>
Date: Mon, 28 Dec 2015 15:09:04 +0800
-Subject: [PATCH 14/78] pinctrl: dt bindings: Add pinfunc header file for
+Subject: [PATCH 14/81] pinctrl: dt bindings: Add pinfunc header file for
mt2701
Add pinfunc header file, mt2701 related dts will include it
diff --git a/target/linux/mediatek/patches-4.4/0015-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt7.patch b/target/linux/mediatek/patches-4.4/0015-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt7.patch
index 4cae264eae..c68f4b3ac9 100644
--- a/target/linux/mediatek/patches-4.4/0015-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt7.patch
+++ b/target/linux/mediatek/patches-4.4/0015-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt7.patch
@@ -1,7 +1,7 @@
From ddc72b659b3642d0496dee4e1ee39416ca008053 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Jan 2016 23:42:06 +0100
-Subject: [PATCH 15/78] dt-bindings: mediatek: Modify pinctrl bindings for
+Subject: [PATCH 15/81] dt-bindings: mediatek: Modify pinctrl bindings for
mt7623
Signed-off-by: John Crispin <blogic@openwrt.org>
diff --git a/target/linux/mediatek/patches-4.4/0016-pinctrl-dt-bindings-Add-pinctrl-file-for-mt7623.patch b/target/linux/mediatek/patches-4.4/0016-pinctrl-dt-bindings-Add-pinctrl-file-for-mt7623.patch
index 299be7c962..22f5395e21 100644
--- a/target/linux/mediatek/patches-4.4/0016-pinctrl-dt-bindings-Add-pinctrl-file-for-mt7623.patch
+++ b/target/linux/mediatek/patches-4.4/0016-pinctrl-dt-bindings-Add-pinctrl-file-for-mt7623.patch
@@ -1,7 +1,7 @@
From 1255eaacd6cc9d1fa6bb33185380efed22008baf Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sat, 27 Jun 2015 13:13:05 +0200
-Subject: [PATCH 16/78] pinctrl: dt bindings: Add pinctrl file for mt7623
+Subject: [PATCH 16/81] pinctrl: dt bindings: Add pinctrl file for mt7623
Add the driver and header files required to make pinctrl work on MediaTek
MT7623.
diff --git a/target/linux/mediatek/patches-4.4/0017-clk-add-hifsys-reset.patch b/target/linux/mediatek/patches-4.4/0017-clk-add-hifsys-reset.patch
index f2f1c19ba6..020bb22461 100644
--- a/target/linux/mediatek/patches-4.4/0017-clk-add-hifsys-reset.patch
+++ b/target/linux/mediatek/patches-4.4/0017-clk-add-hifsys-reset.patch
@@ -1,7 +1,7 @@
From 294cf90337d70ad74edf147180bbeef837298bd0 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 6 Jan 2016 20:06:49 +0100
-Subject: [PATCH 17/78] clk: add hifsys reset
+Subject: [PATCH 17/81] clk: add hifsys reset
Hi,
diff --git a/target/linux/mediatek/patches-4.4/0018-dt-bindings-Add-a-binding-for-Mediatek-xHCI-host-con.patch b/target/linux/mediatek/patches-4.4/0018-dt-bindings-Add-a-binding-for-Mediatek-xHCI-host-con.patch
index 6f64c709ea..ed1482f590 100644
--- a/target/linux/mediatek/patches-4.4/0018-dt-bindings-Add-a-binding-for-Mediatek-xHCI-host-con.patch
+++ b/target/linux/mediatek/patches-4.4/0018-dt-bindings-Add-a-binding-for-Mediatek-xHCI-host-con.patch
@@ -1,7 +1,7 @@
From 84d37aeef94deae3ce87e677f6016a5d980429e8 Mon Sep 17 00:00:00 2001
From: "chunfeng.yun@mediatek.com" <chunfeng.yun@mediatek.com>
Date: Tue, 17 Nov 2015 17:18:39 +0800
-Subject: [PATCH 18/78] dt-bindings: Add a binding for Mediatek xHCI host
+Subject: [PATCH 18/81] dt-bindings: Add a binding for Mediatek xHCI host
controller
add a DT binding documentation of xHCI host controller for the
diff --git a/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch b/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch
index 29a6b45355..105f6d8266 100644
--- a/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch
+++ b/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch
@@ -1,7 +1,7 @@
From 651d8fff94718c7e48b8a40d7774878eb8ed62ee Mon Sep 17 00:00:00 2001
From: "chunfeng.yun@mediatek.com" <chunfeng.yun@mediatek.com>
Date: Tue, 17 Nov 2015 17:18:40 +0800
-Subject: [PATCH 19/78] xhci: mediatek: support MTK xHCI host controller
+Subject: [PATCH 19/81] xhci: mediatek: support MTK xHCI host controller
There some vendor quirks for MTK xhci host controller:
1. It defines some extra SW scheduling parameters for HW
diff --git a/target/linux/mediatek/patches-4.4/0020-arm64-dts-mediatek-add-xHCI-usb-phy-for-mt8173.patch b/target/linux/mediatek/patches-4.4/0020-arm64-dts-mediatek-add-xHCI-usb-phy-for-mt8173.patch
index 33d68085fb..36c8e77db8 100644
--- a/target/linux/mediatek/patches-4.4/0020-arm64-dts-mediatek-add-xHCI-usb-phy-for-mt8173.patch
+++ b/target/linux/mediatek/patches-4.4/0020-arm64-dts-mediatek-add-xHCI-usb-phy-for-mt8173.patch
@@ -1,7 +1,7 @@
From 31a22fbd0d3b187be61c4c5d22b19c95abb327c3 Mon Sep 17 00:00:00 2001
From: "chunfeng.yun@mediatek.com" <chunfeng.yun@mediatek.com>
Date: Tue, 17 Nov 2015 17:18:41 +0800
-Subject: [PATCH 20/78] arm64: dts: mediatek: add xHCI & usb phy for mt8173
+Subject: [PATCH 20/81] arm64: dts: mediatek: add xHCI & usb phy for mt8173
add xHCI and phy drivers for MT8173-EVB
diff --git a/target/linux/mediatek/patches-4.4/0021-Document-DT-Add-bindings-for-mediatek-MT7623-SoC-Pla.patch b/target/linux/mediatek/patches-4.4/0021-Document-DT-Add-bindings-for-mediatek-MT7623-SoC-Pla.patch
index 61b0aa4ac2..df72be25db 100644
--- a/target/linux/mediatek/patches-4.4/0021-Document-DT-Add-bindings-for-mediatek-MT7623-SoC-Pla.patch
+++ b/target/linux/mediatek/patches-4.4/0021-Document-DT-Add-bindings-for-mediatek-MT7623-SoC-Pla.patch
@@ -1,7 +1,7 @@
From 162deec293400cb132161606629654acaec7cb4b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 5 Jan 2016 12:13:54 +0100
-Subject: [PATCH 21/78] Document: DT: Add bindings for mediatek MT7623 SoC
+Subject: [PATCH 21/81] Document: DT: Add bindings for mediatek MT7623 SoC
Platform
This adds a DT binding documentation for the MT7623 SoC from Mediatek.
diff --git a/target/linux/mediatek/patches-4.4/0022-soc-mediatek-add-compat-string-for-mt7623-to-scpsys.patch b/target/linux/mediatek/patches-4.4/0022-soc-mediatek-add-compat-string-for-mt7623-to-scpsys.patch
index 36aea67ed7..bfb0ce2efa 100644
--- a/target/linux/mediatek/patches-4.4/0022-soc-mediatek-add-compat-string-for-mt7623-to-scpsys.patch
+++ b/target/linux/mediatek/patches-4.4/0022-soc-mediatek-add-compat-string-for-mt7623-to-scpsys.patch
@@ -1,7 +1,7 @@
From fa5d94d6b4b314f751b1c32bb5a87a80b866d05e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 5 Jan 2016 16:52:31 +0100
-Subject: [PATCH 22/78] soc: mediatek: add compat string for mt7623 to scpsys
+Subject: [PATCH 22/81] soc: mediatek: add compat string for mt7623 to scpsys
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/mediatek/patches-4.4/0023-ARM-dts-mediatek-add-MT7623-basic-support.patch b/target/linux/mediatek/patches-4.4/0023-ARM-dts-mediatek-add-MT7623-basic-support.patch
index b25c91bee8..f5095d4315 100644
--- a/target/linux/mediatek/patches-4.4/0023-ARM-dts-mediatek-add-MT7623-basic-support.patch
+++ b/target/linux/mediatek/patches-4.4/0023-ARM-dts-mediatek-add-MT7623-basic-support.patch
@@ -1,7 +1,7 @@
From a4df3e7e4e906a4e9dac1f8c43f6192f22ef6242 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 5 Jan 2016 12:16:17 +0100
-Subject: [PATCH 23/78] ARM: dts: mediatek: add MT7623 basic support
+Subject: [PATCH 23/81] ARM: dts: mediatek: add MT7623 basic support
This adds basic chip support for Mediatek MT7623.
diff --git a/target/linux/mediatek/patches-4.4/0024-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch b/target/linux/mediatek/patches-4.4/0024-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch
index 408946109a..6270e06f06 100644
--- a/target/linux/mediatek/patches-4.4/0024-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch
+++ b/target/linux/mediatek/patches-4.4/0024-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch
@@ -1,7 +1,7 @@
From 97478bae3a11b5e87d61b88267e915f7c5ddf4e9 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 6 Jan 2016 21:55:10 +0100
-Subject: [PATCH 24/78] dt-bindings: add MediaTek PCIe binding documentation
+Subject: [PATCH 24/81] dt-bindings: add MediaTek PCIe binding documentation
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/mediatek/patches-4.4/0025-PCI-mediatek-add-support-for-PCIe-found-on-MT7623-MT.patch b/target/linux/mediatek/patches-4.4/0025-PCI-mediatek-add-support-for-PCIe-found-on-MT7623-MT.patch
index fe67755acb..e49e4e66df 100644
--- a/target/linux/mediatek/patches-4.4/0025-PCI-mediatek-add-support-for-PCIe-found-on-MT7623-MT.patch
+++ b/target/linux/mediatek/patches-4.4/0025-PCI-mediatek-add-support-for-PCIe-found-on-MT7623-MT.patch
@@ -1,7 +1,7 @@
From b44b44cfdcb9b2d7ba513d24df1b16b8c57cce59 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 5 Jan 2016 20:20:04 +0100
-Subject: [PATCH 25/78] PCI: mediatek: add support for PCIe found on
+Subject: [PATCH 25/81] PCI: mediatek: add support for PCIe found on
MT7623/MT2701
Add PCIe controller support on MediaTek MT2701/MT7623. The driver supports
diff --git a/target/linux/mediatek/patches-4.4/0026-scpsys-various-fixes.patch b/target/linux/mediatek/patches-4.4/0026-scpsys-various-fixes.patch
index dea9152252..3de2b974c4 100644
--- a/target/linux/mediatek/patches-4.4/0026-scpsys-various-fixes.patch
+++ b/target/linux/mediatek/patches-4.4/0026-scpsys-various-fixes.patch
@@ -1,7 +1,7 @@
From fe8fd85507870bf3aa5ff257944f15b50888d17c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 21 Feb 2016 13:52:12 +0100
-Subject: [PATCH 26/78] scpsys: various fixes
+Subject: [PATCH 26/81] scpsys: various fixes
---
drivers/clk/mediatek/clk-mt2701.c | 2 ++
diff --git a/target/linux/mediatek/patches-4.4/0027-soc-mediatek-PMIC-wrap-Clear-the-vldclr-if-state-mac.patch b/target/linux/mediatek/patches-4.4/0027-soc-mediatek-PMIC-wrap-Clear-the-vldclr-if-state-mac.patch
index d9b98c1f46..da62c8362e 100644
--- a/target/linux/mediatek/patches-4.4/0027-soc-mediatek-PMIC-wrap-Clear-the-vldclr-if-state-mac.patch
+++ b/target/linux/mediatek/patches-4.4/0027-soc-mediatek-PMIC-wrap-Clear-the-vldclr-if-state-mac.patch
@@ -1,7 +1,7 @@
From 2fc7dd0f48d9c2096d76562a1960b78b064701f7 Mon Sep 17 00:00:00 2001
From: Henry Chen <henryc.chen@mediatek.com>
Date: Mon, 4 Jan 2016 20:02:52 +0800
-Subject: [PATCH 27/78] soc: mediatek: PMIC wrap: Clear the vldclr if state
+Subject: [PATCH 27/81] soc: mediatek: PMIC wrap: Clear the vldclr if state
machine stay on FSM_VLDCLR state.
Sometimes PMIC is too busy to send data in time to cause pmic wrap timeout,
diff --git a/target/linux/mediatek/patches-4.4/0028-ARM-mediatek-add-MT7623-smp-bringup-code.patch b/target/linux/mediatek/patches-4.4/0028-ARM-mediatek-add-MT7623-smp-bringup-code.patch
index 4bbfe7427a..8105dfc96f 100644
--- a/target/linux/mediatek/patches-4.4/0028-ARM-mediatek-add-MT7623-smp-bringup-code.patch
+++ b/target/linux/mediatek/patches-4.4/0028-ARM-mediatek-add-MT7623-smp-bringup-code.patch
@@ -1,7 +1,7 @@
From b7d11ec865f99085a907f1a082f70404734e954c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 5 Jan 2016 17:24:28 +0100
-Subject: [PATCH 28/78] ARM: mediatek: add MT7623 smp bringup code
+Subject: [PATCH 28/81] ARM: mediatek: add MT7623 smp bringup code
Add support for booting secondary CPUs on MT7623.
diff --git a/target/linux/mediatek/patches-4.4/0029-soc-mediatek-PMIC-wrap-clear-the-STAUPD_TRIG-bit-of-.patch b/target/linux/mediatek/patches-4.4/0029-soc-mediatek-PMIC-wrap-clear-the-STAUPD_TRIG-bit-of-.patch
index 592b13f0f0..0089f793d6 100644
--- a/target/linux/mediatek/patches-4.4/0029-soc-mediatek-PMIC-wrap-clear-the-STAUPD_TRIG-bit-of-.patch
+++ b/target/linux/mediatek/patches-4.4/0029-soc-mediatek-PMIC-wrap-clear-the-STAUPD_TRIG-bit-of-.patch
@@ -1,7 +1,7 @@
From 7e0c3f4f4c7a55eda670c97b1b3b793ceecc1655 Mon Sep 17 00:00:00 2001
From: Henry Chen <henryc.chen@mediatek.com>
Date: Thu, 21 Jan 2016 19:04:00 +0800
-Subject: [PATCH 29/78] soc: mediatek: PMIC wrap: clear the STAUPD_TRIG bit of
+Subject: [PATCH 29/81] soc: mediatek: PMIC wrap: clear the STAUPD_TRIG bit of
WDT_SRC_EN
Since STAUPD interrupts aren't handled on mt8173, disable watchdog timeout
diff --git a/target/linux/mediatek/patches-4.4/0030-ARM-mediatek-add-mt2701-smp-bringup-code.patch b/target/linux/mediatek/patches-4.4/0030-ARM-mediatek-add-mt2701-smp-bringup-code.patch
index e901a63c19..e22cc507ba 100644
--- a/target/linux/mediatek/patches-4.4/0030-ARM-mediatek-add-mt2701-smp-bringup-code.patch
+++ b/target/linux/mediatek/patches-4.4/0030-ARM-mediatek-add-mt2701-smp-bringup-code.patch
@@ -1,7 +1,7 @@
From 672ed0995e4ebf3f14bb58d08d6ba4c78337b90b Mon Sep 17 00:00:00 2001
From: Louis Yu <louis.yu@mediatek.com>
Date: Thu, 7 Jan 2016 20:09:43 +0800
-Subject: [PATCH 30/78] ARM: mediatek: add mt2701 smp bringup code
+Subject: [PATCH 30/81] ARM: mediatek: add mt2701 smp bringup code
Add support for booting secondary CPUs on mt2701.
diff --git a/target/linux/mediatek/patches-4.4/0031-dt-bindings-ARM-Mediatek-add-MT2701-7623-string-to-t.patch b/target/linux/mediatek/patches-4.4/0031-dt-bindings-ARM-Mediatek-add-MT2701-7623-string-to-t.patch
index d360096656..3b99fb8c3b 100644
--- a/target/linux/mediatek/patches-4.4/0031-dt-bindings-ARM-Mediatek-add-MT2701-7623-string-to-t.patch
+++ b/target/linux/mediatek/patches-4.4/0031-dt-bindings-ARM-Mediatek-add-MT2701-7623-string-to-t.patch
@@ -1,7 +1,7 @@
From 1474be4d7f9559804671ab01911232368496a1de Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 13:12:19 +0100
-Subject: [PATCH 31/78] dt-bindings: ARM: Mediatek: add MT2701/7623 string to
+Subject: [PATCH 31/81] dt-bindings: ARM: Mediatek: add MT2701/7623 string to
the PMIC wrapper doc
Signed-off-by: John Crispin <blogic@openwrt.org>
diff --git a/target/linux/mediatek/patches-4.4/0032-soc-mediatek-PMIC-wrap-don-t-duplicate-the-wrapper-d.patch b/target/linux/mediatek/patches-4.4/0032-soc-mediatek-PMIC-wrap-don-t-duplicate-the-wrapper-d.patch
index a29df296ed..36b71aecd7 100644
--- a/target/linux/mediatek/patches-4.4/0032-soc-mediatek-PMIC-wrap-don-t-duplicate-the-wrapper-d.patch
+++ b/target/linux/mediatek/patches-4.4/0032-soc-mediatek-PMIC-wrap-don-t-duplicate-the-wrapper-d.patch
@@ -1,7 +1,7 @@
From 542f2cd3287fb955efcc5ceca14b690ba19f8c57 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 06:42:01 +0100
-Subject: [PATCH 32/78] soc: mediatek: PMIC wrap: don't duplicate the wrapper
+Subject: [PATCH 32/81] soc: mediatek: PMIC wrap: don't duplicate the wrapper
data
As we add support for more devices struct pmic_wrapper_type will grow and
diff --git a/target/linux/mediatek/patches-4.4/0033-soc-mediatek-PMIC-wrap-add-wrapper-callbacks-for-ini.patch b/target/linux/mediatek/patches-4.4/0033-soc-mediatek-PMIC-wrap-add-wrapper-callbacks-for-ini.patch
index ec0cd5dba5..f5bd0fda65 100644
--- a/target/linux/mediatek/patches-4.4/0033-soc-mediatek-PMIC-wrap-add-wrapper-callbacks-for-ini.patch
+++ b/target/linux/mediatek/patches-4.4/0033-soc-mediatek-PMIC-wrap-add-wrapper-callbacks-for-ini.patch
@@ -1,7 +1,7 @@
From 915340f70c0594d1f0717fee3eb678fa71206509 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 05:27:17 +0100
-Subject: [PATCH 33/78] soc: mediatek: PMIC wrap: add wrapper callbacks for
+Subject: [PATCH 33/81] soc: mediatek: PMIC wrap: add wrapper callbacks for
init_reg_clock
Split init_reg_clock up into SoC specific callbacks. The patch also
diff --git a/target/linux/mediatek/patches-4.4/0034-soc-mediatek-PMIC-wrap-split-SoC-specific-init-into-.patch b/target/linux/mediatek/patches-4.4/0034-soc-mediatek-PMIC-wrap-split-SoC-specific-init-into-.patch
index e9132db6e3..ebb976d366 100644
--- a/target/linux/mediatek/patches-4.4/0034-soc-mediatek-PMIC-wrap-split-SoC-specific-init-into-.patch
+++ b/target/linux/mediatek/patches-4.4/0034-soc-mediatek-PMIC-wrap-split-SoC-specific-init-into-.patch
@@ -1,7 +1,7 @@
From b2287b0afb757870ce0f4324bb4bc597d3f90a2a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 10:12:00 +0100
-Subject: [PATCH 34/78] soc: mediatek: PMIC wrap: split SoC specific init into
+Subject: [PATCH 34/81] soc: mediatek: PMIC wrap: split SoC specific init into
callback
This patch moves the SoC specific wrapper init code into separate callback
diff --git a/target/linux/mediatek/patches-4.4/0035-soc-mediatek-PMIC-wrap-WRAP_INT_EN-needs-a-different.patch b/target/linux/mediatek/patches-4.4/0035-soc-mediatek-PMIC-wrap-WRAP_INT_EN-needs-a-different.patch
index 97300eed9c..041f9b7b3c 100644
--- a/target/linux/mediatek/patches-4.4/0035-soc-mediatek-PMIC-wrap-WRAP_INT_EN-needs-a-different.patch
+++ b/target/linux/mediatek/patches-4.4/0035-soc-mediatek-PMIC-wrap-WRAP_INT_EN-needs-a-different.patch
@@ -1,7 +1,7 @@
From 76f0c7770046ed436be085af1257e0ab06fdd41f Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 10:14:39 +0100
-Subject: [PATCH 35/78] soc: mediatek: PMIC wrap: WRAP_INT_EN needs a
+Subject: [PATCH 35/81] soc: mediatek: PMIC wrap: WRAP_INT_EN needs a
different bitmask for MT2701/7623
MT2701 and MT7623 use a different bitmask for PWRAP_INT_EN.
diff --git a/target/linux/mediatek/patches-4.4/0036-soc-mediatek-PMIC-wrap-SPI_WRITE-needs-a-different-b.patch b/target/linux/mediatek/patches-4.4/0036-soc-mediatek-PMIC-wrap-SPI_WRITE-needs-a-different-b.patch
index 6110d007fd..71b4bf6197 100644
--- a/target/linux/mediatek/patches-4.4/0036-soc-mediatek-PMIC-wrap-SPI_WRITE-needs-a-different-b.patch
+++ b/target/linux/mediatek/patches-4.4/0036-soc-mediatek-PMIC-wrap-SPI_WRITE-needs-a-different-b.patch
@@ -1,7 +1,7 @@
From fca1819591e7824d474c900a3524c0c1fee6a300 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 10:21:42 +0100
-Subject: [PATCH 36/78] soc: mediatek: PMIC wrap: SPI_WRITE needs a different
+Subject: [PATCH 36/81] soc: mediatek: PMIC wrap: SPI_WRITE needs a different
bitmask for MT2701/7623
Different SoCs will use different bitmask for the SPI_WRITE command. This
diff --git a/target/linux/mediatek/patches-4.4/0037-soc-mediatek-PMIC-wrap-move-wdt_src-into-the-pmic_wr.patch b/target/linux/mediatek/patches-4.4/0037-soc-mediatek-PMIC-wrap-move-wdt_src-into-the-pmic_wr.patch
index f3307be5b1..3893c56468 100644
--- a/target/linux/mediatek/patches-4.4/0037-soc-mediatek-PMIC-wrap-move-wdt_src-into-the-pmic_wr.patch
+++ b/target/linux/mediatek/patches-4.4/0037-soc-mediatek-PMIC-wrap-move-wdt_src-into-the-pmic_wr.patch
@@ -1,7 +1,7 @@
From dfdef729324d87d40468f76f0f2767a09c9b0ab0 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 10:48:35 +0100
-Subject: [PATCH 37/78] soc: mediatek: PMIC wrap: move wdt_src into the
+Subject: [PATCH 37/81] soc: mediatek: PMIC wrap: move wdt_src into the
pmic_wrapper_type struct
Different SoCs will use different bitmask for the wdt_src. This patch
diff --git a/target/linux/mediatek/patches-4.4/0038-soc-mediatek-PMIC-wrap-remove-pwrap_is_mt8135-and-pw.patch b/target/linux/mediatek/patches-4.4/0038-soc-mediatek-PMIC-wrap-remove-pwrap_is_mt8135-and-pw.patch
index 3dfc7bd212..49f5d1b736 100644
--- a/target/linux/mediatek/patches-4.4/0038-soc-mediatek-PMIC-wrap-remove-pwrap_is_mt8135-and-pw.patch
+++ b/target/linux/mediatek/patches-4.4/0038-soc-mediatek-PMIC-wrap-remove-pwrap_is_mt8135-and-pw.patch
@@ -1,7 +1,7 @@
From 34d49f015488dcb3de31060846414bd4254e752a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 10:54:18 +0100
-Subject: [PATCH 38/78] soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and
+Subject: [PATCH 38/81] soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and
pwrap_is_mt8173()
With more SoCs being added the list of helper functions like these would
diff --git a/target/linux/mediatek/patches-4.4/0039-soc-mediatek-PMIC-wrap-add-a-slave-specific-struct.patch b/target/linux/mediatek/patches-4.4/0039-soc-mediatek-PMIC-wrap-add-a-slave-specific-struct.patch
index 47658dc1b9..94128973b9 100644
--- a/target/linux/mediatek/patches-4.4/0039-soc-mediatek-PMIC-wrap-add-a-slave-specific-struct.patch
+++ b/target/linux/mediatek/patches-4.4/0039-soc-mediatek-PMIC-wrap-add-a-slave-specific-struct.patch
@@ -1,7 +1,7 @@
From ae593b270b87f9ed6c35dec3ac69dd6bda43c0a0 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 09:55:08 +0100
-Subject: [PATCH 39/78] soc: mediatek: PMIC wrap: add a slave specific struct
+Subject: [PATCH 39/81] soc: mediatek: PMIC wrap: add a slave specific struct
This patch adds a new struct pwrap_slv_type that we use to store the slave
specific data. The patch adds 2 new helper functions to access the dew
diff --git a/target/linux/mediatek/patches-4.4/0040-soc-mediatek-PMIC-wrap-add-mt6323-slave-support.patch b/target/linux/mediatek/patches-4.4/0040-soc-mediatek-PMIC-wrap-add-mt6323-slave-support.patch
index 5aaced639f..11a8915aa0 100644
--- a/target/linux/mediatek/patches-4.4/0040-soc-mediatek-PMIC-wrap-add-mt6323-slave-support.patch
+++ b/target/linux/mediatek/patches-4.4/0040-soc-mediatek-PMIC-wrap-add-mt6323-slave-support.patch
@@ -1,7 +1,7 @@
From 8f3597ca8c8a28d2501d03643569f0cea920c24d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 11:40:43 +0100
-Subject: [PATCH 40/78] soc: mediatek: PMIC wrap: add mt6323 slave support
+Subject: [PATCH 40/81] soc: mediatek: PMIC wrap: add mt6323 slave support
Add support for MT6323 slaves. This PMIC can be found on MT2701 and MT7623
EVB. The only function that we need to touch is pwrap_init_cipher().
diff --git a/target/linux/mediatek/patches-4.4/0041-soc-mediatek-PMIC-wrap-add-MT2701-7623-support.patch b/target/linux/mediatek/patches-4.4/0041-soc-mediatek-PMIC-wrap-add-MT2701-7623-support.patch
index a897640964..56589ae382 100644
--- a/target/linux/mediatek/patches-4.4/0041-soc-mediatek-PMIC-wrap-add-MT2701-7623-support.patch
+++ b/target/linux/mediatek/patches-4.4/0041-soc-mediatek-PMIC-wrap-add-MT2701-7623-support.patch
@@ -1,7 +1,7 @@
From 09351f7c59e08d9c259546e03af3af05c10d644c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 20 Jan 2016 12:09:14 +0100
-Subject: [PATCH 41/78] soc: mediatek: PMIC wrap: add MT2701/7623 support
+Subject: [PATCH 41/81] soc: mediatek: PMIC wrap: add MT2701/7623 support
Add the registers, callbacks and data structures required to make the
wrapper work on MT2701 and MT7623.
diff --git a/target/linux/mediatek/patches-4.4/0042-dt-bindings-mfd-Add-bindings-for-the-MediaTek-MT6323.patch b/target/linux/mediatek/patches-4.4/0042-dt-bindings-mfd-Add-bindings-for-the-MediaTek-MT6323.patch
index cdb930a891..722b1a7326 100644
--- a/target/linux/mediatek/patches-4.4/0042-dt-bindings-mfd-Add-bindings-for-the-MediaTek-MT6323.patch
+++ b/target/linux/mediatek/patches-4.4/0042-dt-bindings-mfd-Add-bindings-for-the-MediaTek-MT6323.patch
@@ -1,7 +1,7 @@
From 94f7b9dabcd073bf629268514f87e5dbd2cafd13 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 10 Jan 2016 17:12:37 +0100
-Subject: [PATCH 42/78] dt-bindings: mfd: Add bindings for the MediaTek MT6323
+Subject: [PATCH 42/81] dt-bindings: mfd: Add bindings for the MediaTek MT6323
PMIC
Signed-off-by: John Crispin <blogic@openwrt.org>
diff --git a/target/linux/mediatek/patches-4.4/0043-mfd-mt6397-int_con-and-int_status-may-vary-in-locati.patch b/target/linux/mediatek/patches-4.4/0043-mfd-mt6397-int_con-and-int_status-may-vary-in-locati.patch
index 1761e7745a..566a75b3e8 100644
--- a/target/linux/mediatek/patches-4.4/0043-mfd-mt6397-int_con-and-int_status-may-vary-in-locati.patch
+++ b/target/linux/mediatek/patches-4.4/0043-mfd-mt6397-int_con-and-int_status-may-vary-in-locati.patch
@@ -1,7 +1,7 @@
From aa90d988b627b41c774891fd72560699f30faefa Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 8 Jan 2016 08:33:17 +0100
-Subject: [PATCH 43/78] mfd: mt6397: int_con and int_status may vary in
+Subject: [PATCH 43/81] mfd: mt6397: int_con and int_status may vary in
location
MT6323 has the INT_CON and INT_STATUS located at a different position.
diff --git a/target/linux/mediatek/patches-4.4/0044-mfd-mt6397-add-support-for-different-Slave-types.patch b/target/linux/mediatek/patches-4.4/0044-mfd-mt6397-add-support-for-different-Slave-types.patch
index 38ba17f016..a44ea10c21 100644
--- a/target/linux/mediatek/patches-4.4/0044-mfd-mt6397-add-support-for-different-Slave-types.patch
+++ b/target/linux/mediatek/patches-4.4/0044-mfd-mt6397-add-support-for-different-Slave-types.patch
@@ -1,7 +1,7 @@
From 1ef53a11f0c282008aa572eb7c97fa1e79621ea3 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 8 Jan 2016 08:41:52 +0100
-Subject: [PATCH 44/78] mfd: mt6397: add support for different Slave types
+Subject: [PATCH 44/81] mfd: mt6397: add support for different Slave types
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/mediatek/patches-4.4/0045-mfd-mt6397-add-MT6323-support-to-MT6397-driver.patch b/target/linux/mediatek/patches-4.4/0045-mfd-mt6397-add-MT6323-support-to-MT6397-driver.patch
index dac60eeeff..627a5a9912 100644
--- a/target/linux/mediatek/patches-4.4/0045-mfd-mt6397-add-MT6323-support-to-MT6397-driver.patch
+++ b/target/linux/mediatek/patches-4.4/0045-mfd-mt6397-add-MT6323-support-to-MT6397-driver.patch
@@ -1,7 +1,7 @@
From 49d9c28b1252c7920840662425aa7e4705cfbccf Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 8 Jan 2016 04:09:43 +0100
-Subject: [PATCH 45/78] mfd: mt6397: add MT6323 support to MT6397 driver
+Subject: [PATCH 45/81] mfd: mt6397: add MT6323 support to MT6397 driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/mediatek/patches-4.4/0046-regulator-Add-document-for-MT6323-regulator.patch b/target/linux/mediatek/patches-4.4/0046-regulator-Add-document-for-MT6323-regulator.patch
index 5beb8d186b..9a6160201f 100644
--- a/target/linux/mediatek/patches-4.4/0046-regulator-Add-document-for-MT6323-regulator.patch
+++ b/target/linux/mediatek/patches-4.4/0046-regulator-Add-document-for-MT6323-regulator.patch
@@ -1,7 +1,7 @@
From f5b5c70021187c0ef70edf83865b62fec473e8fb Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 10 Jan 2016 17:31:46 +0100
-Subject: [PATCH 46/78] regulator: Add document for MT6323 regulator
+Subject: [PATCH 46/81] regulator: Add document for MT6323 regulator
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: devicetree@vger.kernel.org
diff --git a/target/linux/mediatek/patches-4.4/0047-regulator-mt6323-Add-support-for-MT6323-regulator.patch b/target/linux/mediatek/patches-4.4/0047-regulator-mt6323-Add-support-for-MT6323-regulator.patch
index fc2b3d2fb2..a4ae8b38a9 100644
--- a/target/linux/mediatek/patches-4.4/0047-regulator-mt6323-Add-support-for-MT6323-regulator.patch
+++ b/target/linux/mediatek/patches-4.4/0047-regulator-mt6323-Add-support-for-MT6323-regulator.patch
@@ -1,7 +1,7 @@
From 031a2ff537366855e88bc95e5d42ea522b6c5ad8 Mon Sep 17 00:00:00 2001
From: Chen Zhong <chen.zhong@mediatek.com>
Date: Fri, 8 Jan 2016 04:17:37 +0100
-Subject: [PATCH 47/78] regulator: mt6323: Add support for MT6323 regulator
+Subject: [PATCH 47/81] regulator: mt6323: Add support for MT6323 regulator
The MT6323 is a regulator found on boards based on MediaTek MT7623 and
probably other SoCs. It is a so called pmic and connects as a slave to
diff --git a/target/linux/mediatek/patches-4.4/0048-net-next-mediatek-document-MediaTek-SoC-ethernet-bin.patch b/target/linux/mediatek/patches-4.4/0048-net-next-mediatek-document-MediaTek-SoC-ethernet-bin.patch
index 3e668992ab..eee8d33c32 100644
--- a/target/linux/mediatek/patches-4.4/0048-net-next-mediatek-document-MediaTek-SoC-ethernet-bin.patch
+++ b/target/linux/mediatek/patches-4.4/0048-net-next-mediatek-document-MediaTek-SoC-ethernet-bin.patch
@@ -1,7 +1,7 @@
From b79b0519fb67c22cbed341c5e9dca5ad0aa4d15c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 2 Mar 2016 07:18:52 +0100
-Subject: [PATCH 48/78] net-next: mediatek: document MediaTek SoC ethernet
+Subject: [PATCH 48/81] net-next: mediatek: document MediaTek SoC ethernet
binding
This adds the binding documentation for the MediaTek Ethernet
diff --git a/target/linux/mediatek/patches-4.4/0049-net-next-mediatek-add-support-for-MT7623-ethernet.patch b/target/linux/mediatek/patches-4.4/0049-net-next-mediatek-add-support-for-MT7623-ethernet.patch
index 792e9e76a1..0361b2aab1 100644
--- a/target/linux/mediatek/patches-4.4/0049-net-next-mediatek-add-support-for-MT7623-ethernet.patch
+++ b/target/linux/mediatek/patches-4.4/0049-net-next-mediatek-add-support-for-MT7623-ethernet.patch
@@ -1,7 +1,7 @@
From 999621b6bfff903d16691799a23bfccac91c31df Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 2 Mar 2016 04:27:10 +0100
-Subject: [PATCH 49/78] net-next: mediatek: add support for MT7623 ethernet
+Subject: [PATCH 49/81] net-next: mediatek: add support for MT7623 ethernet
Add ethernet support for MediaTek SoCs from the MT7623 family. These have
dual GMAC. Depending on the exact version, there might be a built-in
diff --git a/target/linux/mediatek/patches-4.4/0050-net-next-mediatek-add-Kconfig-and-Makefile.patch b/target/linux/mediatek/patches-4.4/0050-net-next-mediatek-add-Kconfig-and-Makefile.patch
index 4c6ff0196b..271f29e981 100644
--- a/target/linux/mediatek/patches-4.4/0050-net-next-mediatek-add-Kconfig-and-Makefile.patch
+++ b/target/linux/mediatek/patches-4.4/0050-net-next-mediatek-add-Kconfig-and-Makefile.patch
@@ -1,7 +1,7 @@
From 0189b71d0ce9feef1c3fac7d9c3eb7dae57dabdf Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 2 Mar 2016 04:32:43 +0100
-Subject: [PATCH 50/78] net-next: mediatek: add Kconfig and Makefile
+Subject: [PATCH 50/81] net-next: mediatek: add Kconfig and Makefile
This patch adds the Makefile and Kconfig required to make the driver build.
diff --git a/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch b/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch
index 41c1b69aa9..d51f158ce7 100644
--- a/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch
+++ b/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch
@@ -1,7 +1,7 @@
From 76ac7ac355452b4a2cf5cf7b1d9ab5b08e349b4b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 2 Mar 2016 04:34:04 +0100
-Subject: [PATCH 51/78] net-next: mediatek: add an entry to MAINTAINERS
+Subject: [PATCH 51/81] net-next: mediatek: add an entry to MAINTAINERS
Add myself and Felix as the Maintainers for the MediaTek ethernet driver.
diff --git a/target/linux/mediatek/patches-4.4/0052-mtd-nand-add-an-mtd_to_nand-helper.patch b/target/linux/mediatek/patches-4.4/0052-mtd-nand-add-an-mtd_to_nand-helper.patch
index 8cc0075b93..3e48991c39 100644
--- a/target/linux/mediatek/patches-4.4/0052-mtd-nand-add-an-mtd_to_nand-helper.patch
+++ b/target/linux/mediatek/patches-4.4/0052-mtd-nand-add-an-mtd_to_nand-helper.patch
@@ -1,7 +1,7 @@
From 17b9724cf84aa32f15334c23d5df34ad3cb885f3 Mon Sep 17 00:00:00 2001
From: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Mon, 16 Nov 2015 14:37:35 +0100
-Subject: [PATCH 52/78] mtd: nand: add an mtd_to_nand() helper
+Subject: [PATCH 52/81] mtd: nand: add an mtd_to_nand() helper
Some drivers are retrieving the nand_chip pointer using the container_of
macro on a struct wrapping both the nand_chip and the mtd_info struct while
diff --git a/target/linux/mediatek/patches-4.4/0053-mtd-nand-add-nand_to_mtd-helper.patch b/target/linux/mediatek/patches-4.4/0053-mtd-nand-add-nand_to_mtd-helper.patch
index 29c0d1b427..00b082bdd0 100644
--- a/target/linux/mediatek/patches-4.4/0053-mtd-nand-add-nand_to_mtd-helper.patch
+++ b/target/linux/mediatek/patches-4.4/0053-mtd-nand-add-nand_to_mtd-helper.patch
@@ -1,7 +1,7 @@
From 86e5fe2edbe2ca4f0d83a26d9b3d02620cd78f37 Mon Sep 17 00:00:00 2001
From: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Tue, 1 Dec 2015 12:03:07 +0100
-Subject: [PATCH 53/78] mtd: nand: add nand_to_mtd() helper
+Subject: [PATCH 53/81] mtd: nand: add nand_to_mtd() helper
Add a new helper to retrieve the MTD device attached to a NAND chip.
diff --git a/target/linux/mediatek/patches-4.4/0054-mtd-nand-add-helpers-to-access-priv.patch b/target/linux/mediatek/patches-4.4/0054-mtd-nand-add-helpers-to-access-priv.patch
index 9cbc064075..f1d6089369 100644
--- a/target/linux/mediatek/patches-4.4/0054-mtd-nand-add-helpers-to-access-priv.patch
+++ b/target/linux/mediatek/patches-4.4/0054-mtd-nand-add-helpers-to-access-priv.patch
@@ -1,7 +1,7 @@
From ca10b32de369729b8e7947fe1945e8e393d803cd Mon Sep 17 00:00:00 2001
From: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Thu, 10 Dec 2015 09:00:39 +0100
-Subject: [PATCH 54/78] mtd: nand: add helpers to access ->priv
+Subject: [PATCH 54/81] mtd: nand: add helpers to access ->priv
Add two helpers to access the field reserved for private controller data.
This makes it clearer what this field is reserved for and ease future
diff --git a/target/linux/mediatek/patches-4.4/0055-mtd-nand-embed-an-mtd_info-structure-into-nand_chip.patch b/target/linux/mediatek/patches-4.4/0055-mtd-nand-embed-an-mtd_info-structure-into-nand_chip.patch
index 29a6cd6f97..a034504f80 100644
--- a/target/linux/mediatek/patches-4.4/0055-mtd-nand-embed-an-mtd_info-structure-into-nand_chip.patch
+++ b/target/linux/mediatek/patches-4.4/0055-mtd-nand-embed-an-mtd_info-structure-into-nand_chip.patch
@@ -1,7 +1,7 @@
From b4a93bff70545d73337e2cae7209fd1ae4d9d8e8 Mon Sep 17 00:00:00 2001
From: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Tue, 1 Dec 2015 12:03:06 +0100
-Subject: [PATCH 55/78] mtd: nand: embed an mtd_info structure into nand_chip
+Subject: [PATCH 55/81] mtd: nand: embed an mtd_info structure into nand_chip
Currently all NAND controller drivers are providing both the mtd_info and
nand_chip struct and then let the NAND subsystem to initialize a few
diff --git a/target/linux/mediatek/patches-4.4/0056-mtd-add-get-set-of_node-flash_node-helpers.patch b/target/linux/mediatek/patches-4.4/0056-mtd-add-get-set-of_node-flash_node-helpers.patch
index a7ec4c44ac..ece9453f6a 100644
--- a/target/linux/mediatek/patches-4.4/0056-mtd-add-get-set-of_node-flash_node-helpers.patch
+++ b/target/linux/mediatek/patches-4.4/0056-mtd-add-get-set-of_node-flash_node-helpers.patch
@@ -1,7 +1,7 @@
From 3ed29e95facfd50427721f8e9093dc36c2304e42 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 22 Mar 2016 03:52:07 +0100
-Subject: [PATCH 56/78] mtd: add get/set of_node/flash_node helpers
+Subject: [PATCH 56/81] mtd: add get/set of_node/flash_node helpers
We are going to begin using the mtd->dev.of_node field for MTD device
nodes, so let's add helpers for it. Also, we'll be making some
diff --git a/target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch b/target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch
index e42d66092a..e665d30e90 100644
--- a/target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch
+++ b/target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch
@@ -1,7 +1,7 @@
From 5f0a1fa77e5d53b8dbb751fcfc59c7ef3d78ddf2 Mon Sep 17 00:00:00 2001
From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Date: Wed, 2 Mar 2016 12:00:11 -0500
-Subject: [PATCH 57/78] mtd: mediatek: device tree docs for MTK Smart Device
+Subject: [PATCH 57/81] mtd: mediatek: device tree docs for MTK Smart Device
Gen1 NAND
This patch adds documentation support for Smart Device Gen1 type of
diff --git a/target/linux/mediatek/patches-4.4/0058-mtd-mediatek-driver-for-MTK-Smart-Device-Gen1-NAND.patch b/target/linux/mediatek/patches-4.4/0058-mtd-mediatek-driver-for-MTK-Smart-Device-Gen1-NAND.patch
index df3c218476..49f670e5e8 100644
--- a/target/linux/mediatek/patches-4.4/0058-mtd-mediatek-driver-for-MTK-Smart-Device-Gen1-NAND.patch
+++ b/target/linux/mediatek/patches-4.4/0058-mtd-mediatek-driver-for-MTK-Smart-Device-Gen1-NAND.patch
@@ -1,7 +1,7 @@
From cc1959d5bc9a709729fcd02d78f4c27394393109 Mon Sep 17 00:00:00 2001
From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Date: Wed, 2 Mar 2016 12:00:12 -0500
-Subject: [PATCH 58/78] mtd: mediatek: driver for MTK Smart Device Gen1 NAND
+Subject: [PATCH 58/81] mtd: mediatek: driver for MTK Smart Device Gen1 NAND
This patch adds support for mediatek's SDG1 NFC nand controller
embedded in SoC 2701.
diff --git a/target/linux/mediatek/patches-4.4/0059-mtd-nand-backport-fixes.patch b/target/linux/mediatek/patches-4.4/0059-mtd-nand-backport-fixes.patch
index 392dea3ecc..458b7d4cab 100644
--- a/target/linux/mediatek/patches-4.4/0059-mtd-nand-backport-fixes.patch
+++ b/target/linux/mediatek/patches-4.4/0059-mtd-nand-backport-fixes.patch
@@ -1,7 +1,7 @@
From 96ec6b2ee8a19799835209d0a6753519b96277f8 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 31 Mar 2016 02:28:08 +0200
-Subject: [PATCH 59/78] mtd: nand: backport fixes
+Subject: [PATCH 59/81] mtd: nand: backport fixes
---
drivers/mtd/nand/mtksdg1_nand.c | 9 ++++++++-
diff --git a/target/linux/mediatek/patches-4.4/0060-net-mediatek-checking-for-IS_ERR-instead-of-NULL.patch b/target/linux/mediatek/patches-4.4/0060-net-mediatek-checking-for-IS_ERR-instead-of-NULL.patch
index a0e4f9ee5f..dd69b85abb 100644
--- a/target/linux/mediatek/patches-4.4/0060-net-mediatek-checking-for-IS_ERR-instead-of-NULL.patch
+++ b/target/linux/mediatek/patches-4.4/0060-net-mediatek-checking-for-IS_ERR-instead-of-NULL.patch
@@ -1,7 +1,7 @@
From c657573d75d71076fef8294f9d4f7f9a0e6f7a9e Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 15 Mar 2016 10:18:49 +0300
-Subject: [PATCH 60/78] net: mediatek: checking for IS_ERR() instead of NULL
+Subject: [PATCH 60/81] net: mediatek: checking for IS_ERR() instead of NULL
of_phy_connect() returns NULL on error, it never returns error pointers.
diff --git a/target/linux/mediatek/patches-4.4/0061-net-mediatek-unlock-on-error-in-mtk_tx_map.patch b/target/linux/mediatek/patches-4.4/0061-net-mediatek-unlock-on-error-in-mtk_tx_map.patch
index effb45fade..a8bcd9cdb3 100644
--- a/target/linux/mediatek/patches-4.4/0061-net-mediatek-unlock-on-error-in-mtk_tx_map.patch
+++ b/target/linux/mediatek/patches-4.4/0061-net-mediatek-unlock-on-error-in-mtk_tx_map.patch
@@ -1,7 +1,7 @@
From d8261ad9e408adfa5d1758a0f655c7726f0f831b Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 15 Mar 2016 10:19:04 +0300
-Subject: [PATCH 61/78] net: mediatek: unlock on error in mtk_tx_map()
+Subject: [PATCH 61/81] net: mediatek: unlock on error in mtk_tx_map()
There was a missing unlock on the error path.
diff --git a/target/linux/mediatek/patches-4.4/0062-net-mediatek-use-dma_addr_t-correctly.patch b/target/linux/mediatek/patches-4.4/0062-net-mediatek-use-dma_addr_t-correctly.patch
index c44813068f..c12bd6ba21 100644
--- a/target/linux/mediatek/patches-4.4/0062-net-mediatek-use-dma_addr_t-correctly.patch
+++ b/target/linux/mediatek/patches-4.4/0062-net-mediatek-use-dma_addr_t-correctly.patch
@@ -1,7 +1,7 @@
From 26c749e825e87e8be46498be7ac425e83b0f22c6 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 14 Mar 2016 15:07:10 +0100
-Subject: [PATCH 62/78] net: mediatek: use dma_addr_t correctly
+Subject: [PATCH 62/81] net: mediatek: use dma_addr_t correctly
dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
not an 'unsigned int', and gcc correctly warns about broken
diff --git a/target/linux/mediatek/patches-4.4/0063-net-mediatek-remove-incorrect-dma_mask-assignment.patch b/target/linux/mediatek/patches-4.4/0063-net-mediatek-remove-incorrect-dma_mask-assignment.patch
index 021f8b43da..f251bf5c71 100644
--- a/target/linux/mediatek/patches-4.4/0063-net-mediatek-remove-incorrect-dma_mask-assignment.patch
+++ b/target/linux/mediatek/patches-4.4/0063-net-mediatek-remove-incorrect-dma_mask-assignment.patch
@@ -1,7 +1,7 @@
From 21f52c7a0ec569ae9dd72bfc619a7161e40a2e9d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 14 Mar 2016 15:07:11 +0100
-Subject: [PATCH 63/78] net: mediatek: remove incorrect dma_mask assignment
+Subject: [PATCH 63/81] net: mediatek: remove incorrect dma_mask assignment
Device drivers should not mess with the DMA mask directly,
but instead call dma_set_mask() etc if needed.
diff --git a/target/linux/mediatek/patches-4.4/0064-net-mediatek-check-device_reset-return-code.patch b/target/linux/mediatek/patches-4.4/0064-net-mediatek-check-device_reset-return-code.patch
index 06aab2b205..e06ed2b815 100644
--- a/target/linux/mediatek/patches-4.4/0064-net-mediatek-check-device_reset-return-code.patch
+++ b/target/linux/mediatek/patches-4.4/0064-net-mediatek-check-device_reset-return-code.patch
@@ -1,7 +1,7 @@
From e1e7d841480b3a0febdb999fd1c6c4213ee18ea7 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 14 Mar 2016 15:07:12 +0100
-Subject: [PATCH 64/78] net: mediatek: check device_reset return code
+Subject: [PATCH 64/81] net: mediatek: check device_reset return code
The device_reset() function may fail, so we have to check
its return value, e.g. to make deferred probing work correctly.
diff --git a/target/linux/mediatek/patches-4.4/0065-net-mediatek-watchdog_timeo-was-not-set.patch b/target/linux/mediatek/patches-4.4/0065-net-mediatek-watchdog_timeo-was-not-set.patch
index 0a7c61566f..1ddaaae01f 100644
--- a/target/linux/mediatek/patches-4.4/0065-net-mediatek-watchdog_timeo-was-not-set.patch
+++ b/target/linux/mediatek/patches-4.4/0065-net-mediatek-watchdog_timeo-was-not-set.patch
@@ -1,7 +1,7 @@
From 103d950e6201ab54a8b64402bb0b32a35831b028 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 30 Mar 2016 03:18:17 +0200
-Subject: [PATCH 65/78] net: mediatek: watchdog_timeo was not set
+Subject: [PATCH 65/81] net: mediatek: watchdog_timeo was not set
The original commit failed to set watchdog_timeo. This patch sets
watchdog_timeo to HZ.
diff --git a/target/linux/mediatek/patches-4.4/0066-net-mediatek-mtk_cal_txd_req-returns-bad-value.patch b/target/linux/mediatek/patches-4.4/0066-net-mediatek-mtk_cal_txd_req-returns-bad-value.patch
index fbb744440b..f2f166d1eb 100644
--- a/target/linux/mediatek/patches-4.4/0066-net-mediatek-mtk_cal_txd_req-returns-bad-value.patch
+++ b/target/linux/mediatek/patches-4.4/0066-net-mediatek-mtk_cal_txd_req-returns-bad-value.patch
@@ -1,7 +1,7 @@
From 1212704e8270f0e673e10a49960318ade0096cf9 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 22 Mar 2016 04:42:27 +0100
-Subject: [PATCH 66/78] net: mediatek: mtk_cal_txd_req() returns bad value
+Subject: [PATCH 66/81] net: mediatek: mtk_cal_txd_req() returns bad value
The code used to also support the PDMA engine, which had 2 packet pointers
per descriptor. Because of this we have to divide the result by 2 and round
diff --git a/target/linux/mediatek/patches-4.4/0067-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch b/target/linux/mediatek/patches-4.4/0067-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch
index 5f02dd5820..ca3fc0f964 100644
--- a/target/linux/mediatek/patches-4.4/0067-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch
+++ b/target/linux/mediatek/patches-4.4/0067-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch
@@ -1,7 +1,7 @@
From 429b5becfb1e4aacf392c4b246a17b83faad3072 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 29 Mar 2016 14:32:07 +0200
-Subject: [PATCH 67/78] net: mediatek: update the IRQ part of the binding
+Subject: [PATCH 67/81] net: mediatek: update the IRQ part of the binding
document
The current binding document only describes a single interrupt. Update the
diff --git a/target/linux/mediatek/patches-4.4/0068-net-mediatek-remove-superflous-reset-call.patch b/target/linux/mediatek/patches-4.4/0068-net-mediatek-remove-superflous-reset-call.patch
index 2f940d34fc..c404e8c182 100644
--- a/target/linux/mediatek/patches-4.4/0068-net-mediatek-remove-superflous-reset-call.patch
+++ b/target/linux/mediatek/patches-4.4/0068-net-mediatek-remove-superflous-reset-call.patch
@@ -1,7 +1,7 @@
From 3c8781211140cc23750544a52b7310edb3b57f00 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 25 Mar 2016 04:24:27 +0100
-Subject: [PATCH 68/78] net: mediatek: remove superflous reset call
+Subject: [PATCH 68/81] net: mediatek: remove superflous reset call
HW reset is triggered int he mtk_hw_init() function. There is no need to
reset the core during probe.
diff --git a/target/linux/mediatek/patches-4.4/0069-net-mediatek-fix-stop-and-wakeup-of-queue.patch b/target/linux/mediatek/patches-4.4/0069-net-mediatek-fix-stop-and-wakeup-of-queue.patch
index 170266227c..038d21b714 100644
--- a/target/linux/mediatek/patches-4.4/0069-net-mediatek-fix-stop-and-wakeup-of-queue.patch
+++ b/target/linux/mediatek/patches-4.4/0069-net-mediatek-fix-stop-and-wakeup-of-queue.patch
@@ -1,7 +1,7 @@
From 6f8bfdfe2984467177d2a88982517659ec09ab5d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 29 Mar 2016 16:41:07 +0200
-Subject: [PATCH 69/78] net: mediatek: fix stop and wakeup of queue
+Subject: [PATCH 69/81] net: mediatek: fix stop and wakeup of queue
The driver supports 2 MACs. Both run on the same DMA ring. If we go
above/below the TX rings thershold value, we always need to wake/stop
diff --git a/target/linux/mediatek/patches-4.4/0070-net-mediatek-fix-mtk_pending_work.patch b/target/linux/mediatek/patches-4.4/0070-net-mediatek-fix-mtk_pending_work.patch
index 27f282b393..77ab31b35f 100644
--- a/target/linux/mediatek/patches-4.4/0070-net-mediatek-fix-mtk_pending_work.patch
+++ b/target/linux/mediatek/patches-4.4/0070-net-mediatek-fix-mtk_pending_work.patch
@@ -1,7 +1,7 @@
From a2dfb33c8a0dc03fe2ec2121490df2b9352febef Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 29 Mar 2016 17:00:47 +0200
-Subject: [PATCH 70/78] net: mediatek: fix mtk_pending_work
+Subject: [PATCH 70/81] net: mediatek: fix mtk_pending_work
The driver supports 2 MACs. Both run on the same DMA ring. If we hit a TX
timeout we need to stop both netdevs before retarting them again. If we
diff --git a/target/linux/mediatek/patches-4.4/0071-net-mediatek-fix-TX-locking.patch b/target/linux/mediatek/patches-4.4/0071-net-mediatek-fix-TX-locking.patch
index 011fad2e61..dd9c42ad77 100644
--- a/target/linux/mediatek/patches-4.4/0071-net-mediatek-fix-TX-locking.patch
+++ b/target/linux/mediatek/patches-4.4/0071-net-mediatek-fix-TX-locking.patch
@@ -1,7 +1,7 @@
From b9df14f712866925856c0ffb2d899511c21e1b8a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 29 Mar 2016 17:20:01 +0200
-Subject: [PATCH 71/78] net: mediatek: fix TX locking
+Subject: [PATCH 71/81] net: mediatek: fix TX locking
Inside the TX path there is a lock inside the tx_map function. This is
however too late. The patch moves the lock to the start of the xmit
diff --git a/target/linux/mediatek/patches-4.4/0072-net-mediatek-move-the-pending_work-struct-to-the-dev.patch b/target/linux/mediatek/patches-4.4/0072-net-mediatek-move-the-pending_work-struct-to-the-dev.patch
index 1b9f221588..6b94c18a7b 100644
--- a/target/linux/mediatek/patches-4.4/0072-net-mediatek-move-the-pending_work-struct-to-the-dev.patch
+++ b/target/linux/mediatek/patches-4.4/0072-net-mediatek-move-the-pending_work-struct-to-the-dev.patch
@@ -1,7 +1,7 @@
From 147dab4408adcccf702f8c5143e9c6b91f746790 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 29 Mar 2016 17:24:24 +0200
-Subject: [PATCH 72/78] net: mediatek: move the pending_work struct to the
+Subject: [PATCH 72/81] net: mediatek: move the pending_work struct to the
device generic struct
The worker always touches both netdevs. It is ethernet core and not MAC
diff --git a/target/linux/mediatek/patches-4.4/0073-net-next-mediatek-add-support-for-IRQ-grouping.patch b/target/linux/mediatek/patches-4.4/0073-net-next-mediatek-add-support-for-IRQ-grouping.patch
deleted file mode 100644
index 6457deba0a..0000000000
--- a/target/linux/mediatek/patches-4.4/0073-net-next-mediatek-add-support-for-IRQ-grouping.patch
+++ /dev/null
@@ -1,314 +0,0 @@
-From e301da64a9fd2ebc24d4c9b2d184681ec833fd72 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 23 Mar 2016 18:31:48 +0100
-Subject: [PATCH 73/78] net-next: mediatek: add support for IRQ grouping
-
-The ethernet core has 3 IRQs. using the IRQ grouping registers we are able
-to separate TX and RX IRQs, which allows us to service them on separate
-cores. This patch splits the irq handler into 2 separate functiosn, one for
-TX and another for RX. The TX housekeeping is split out of the NAPI handler.
-Instead we use a tasklet to handle housekeeping.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 115 +++++++++++++++++----------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 12 ++-
- 2 files changed, 86 insertions(+), 41 deletions(-)
-
-diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-index bbcd607..2097ae1 100644
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -757,7 +757,7 @@ drop:
- }
-
- static int mtk_poll_rx(struct napi_struct *napi, int budget,
-- struct mtk_eth *eth, u32 rx_intr)
-+ struct mtk_eth *eth)
- {
- struct mtk_rx_ring *ring = &eth->rx_ring;
- int idx = ring->calc_idx;
-@@ -843,12 +843,12 @@ release_desc:
- }
-
- if (done < budget)
-- mtk_w32(eth, rx_intr, MTK_QMTK_INT_STATUS);
-+ mtk_w32(eth, MTK_RX_DONE_INT, MTK_QMTK_INT_STATUS);
-
- return done;
- }
-
--static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again)
-+static int mtk_poll_tx(struct mtk_eth *eth, int budget)
- {
- struct mtk_tx_ring *ring = &eth->tx_ring;
- struct mtk_tx_dma *desc;
-@@ -911,9 +911,7 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again)
- }
-
- /* read hw index again make sure no new tx packet */
-- if (cpu != dma || cpu != mtk_r32(eth, MTK_QTX_DRX_PTR))
-- *tx_again = true;
-- else
-+ if (cpu == dma && cpu == mtk_r32(eth, MTK_QTX_DRX_PTR))
- mtk_w32(eth, MTK_TX_DONE_INT, MTK_QMTK_INT_STATUS);
-
- if (!total)
-@@ -925,27 +923,27 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again)
- return total;
- }
-
-+static void mtk_clean_tx_tasklet(unsigned long arg)
-+{
-+ struct mtk_eth *eth = (struct mtk_eth *)arg;
-+
-+ if (mtk_poll_tx(eth, MTK_NAPI_WEIGHT) > 0)
-+ tasklet_schedule(&eth->tx_clean_tasklet);
-+ else
-+ mtk_irq_enable(eth, MTK_TX_DONE_INT);
-+}
-+
- static int mtk_poll(struct napi_struct *napi, int budget)
- {
- struct mtk_eth *eth = container_of(napi, struct mtk_eth, rx_napi);
-- u32 status, status2, mask, tx_intr, rx_intr, status_intr;
-- int tx_done, rx_done;
-- bool tx_again = false;
-+ u32 status, status2, mask, status_intr;
-+ int rx_done = 0;
-
- status = mtk_r32(eth, MTK_QMTK_INT_STATUS);
- status2 = mtk_r32(eth, MTK_INT_STATUS2);
-- tx_intr = MTK_TX_DONE_INT;
-- rx_intr = MTK_RX_DONE_INT;
- status_intr = (MTK_GDM1_AF | MTK_GDM2_AF);
-- tx_done = 0;
-- rx_done = 0;
-- tx_again = 0;
-
-- if (status & tx_intr)
-- tx_done = mtk_poll_tx(eth, budget, &tx_again);
--
-- if (status & rx_intr)
-- rx_done = mtk_poll_rx(napi, budget, eth, rx_intr);
-+ rx_done = mtk_poll_rx(napi, budget, eth);
-
- if (unlikely(status2 & status_intr)) {
- mtk_stats_update(eth);
-@@ -954,20 +952,20 @@ static int mtk_poll(struct napi_struct *napi, int budget)
-
- if (unlikely(netif_msg_intr(eth))) {
- mask = mtk_r32(eth, MTK_QDMA_INT_MASK);
-- netdev_info(eth->netdev[0],
-- "done tx %d, rx %d, intr 0x%08x/0x%x\n",
-- tx_done, rx_done, status, mask);
-+ dev_info(eth->dev,
-+ "done rx %d, intr 0x%08x/0x%x\n",
-+ rx_done, status, mask);
- }
-
-- if (tx_again || rx_done == budget)
-+ if (rx_done == budget)
- return budget;
-
- status = mtk_r32(eth, MTK_QMTK_INT_STATUS);
-- if (status & (tx_intr | rx_intr))
-+ if (status & MTK_RX_DONE_INT)
- return budget;
-
- napi_complete(napi);
-- mtk_irq_enable(eth, tx_intr | rx_intr);
-+ mtk_irq_enable(eth, MTK_RX_DONE_INT);
-
- return rx_done;
- }
-@@ -1196,22 +1194,43 @@ static void mtk_tx_timeout(struct net_device *dev)
- schedule_work(&eth->pending_work);
- }
-
--static irqreturn_t mtk_handle_irq(int irq, void *_eth)
-+static irqreturn_t mtk_handle_irq_rx(int irq, void *_eth)
- {
- struct mtk_eth *eth = _eth;
- u32 status;
-
- status = mtk_r32(eth, MTK_QMTK_INT_STATUS);
-+ status &= ~MTK_TX_DONE_INT;
-+
- if (unlikely(!status))
- return IRQ_NONE;
-
-- if (likely(status & (MTK_RX_DONE_INT | MTK_TX_DONE_INT))) {
-+ if (status & MTK_RX_DONE_INT) {
- if (likely(napi_schedule_prep(&eth->rx_napi)))
- __napi_schedule(&eth->rx_napi);
-- } else {
-- mtk_w32(eth, status, MTK_QMTK_INT_STATUS);
-+ mtk_irq_disable(eth, MTK_RX_DONE_INT);
- }
-- mtk_irq_disable(eth, (MTK_RX_DONE_INT | MTK_TX_DONE_INT));
-+ mtk_w32(eth, status, MTK_QMTK_INT_STATUS);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t mtk_handle_irq_tx(int irq, void *_eth)
-+{
-+ struct mtk_eth *eth = _eth;
-+ u32 status;
-+
-+ status = mtk_r32(eth, MTK_QMTK_INT_STATUS);
-+ status &= ~MTK_RX_DONE_INT;
-+
-+ if (unlikely(!status))
-+ return IRQ_NONE;
-+
-+ if (status & MTK_TX_DONE_INT) {
-+ tasklet_schedule(&eth->tx_clean_tasklet);
-+ mtk_irq_disable(eth, MTK_TX_DONE_INT);
-+ }
-+ mtk_w32(eth, status, MTK_QMTK_INT_STATUS);
-
- return IRQ_HANDLED;
- }
-@@ -1224,7 +1243,7 @@ static void mtk_poll_controller(struct net_device *dev)
- u32 int_mask = MTK_TX_DONE_INT | MTK_RX_DONE_INT;
-
- mtk_irq_disable(eth, int_mask);
-- mtk_handle_irq(dev->irq, dev);
-+ mtk_handle_irq(dev->irq[0], dev);
- mtk_irq_enable(eth, int_mask);
- }
- #endif
-@@ -1345,7 +1364,11 @@ static int __init mtk_hw_init(struct mtk_eth *eth)
- /* Enable RX VLan Offloading */
- mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-
-- err = devm_request_irq(eth->dev, eth->irq, mtk_handle_irq, 0,
-+ err = devm_request_irq(eth->dev, eth->irq[1], mtk_handle_irq_tx, 0,
-+ dev_name(eth->dev), eth);
-+ if (err)
-+ return err;
-+ err = devm_request_irq(eth->dev, eth->irq[2], mtk_handle_irq_rx, 0,
- dev_name(eth->dev), eth);
- if (err)
- return err;
-@@ -1361,7 +1384,11 @@ static int __init mtk_hw_init(struct mtk_eth *eth)
- mtk_w32(eth, 0, MTK_RST_GL);
-
- /* FE int grouping */
-- mtk_w32(eth, 0, MTK_FE_INT_GRP);
-+ mtk_w32(eth, MTK_TX_DONE_INT, MTK_PDMA_INT_GRP1);
-+ mtk_w32(eth, MTK_RX_DONE_INT, MTK_PDMA_INT_GRP2);
-+ mtk_w32(eth, MTK_TX_DONE_INT, MTK_QDMA_INT_GRP1);
-+ mtk_w32(eth, MTK_RX_DONE_INT, MTK_QDMA_INT_GRP2);
-+ mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
-
- for (i = 0; i < 2; i++) {
- u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
-@@ -1409,7 +1436,9 @@ static void mtk_uninit(struct net_device *dev)
- phy_disconnect(mac->phy_dev);
- mtk_mdio_cleanup(eth);
- mtk_irq_disable(eth, ~0);
-- free_irq(dev->irq, dev);
-+ free_irq(eth->irq[0], dev);
-+ free_irq(eth->irq[1], dev);
-+ free_irq(eth->irq[2], dev);
- }
-
- static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-@@ -1684,10 +1713,10 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
- dev_err(eth->dev, "error bringing up device\n");
- goto free_netdev;
- }
-- eth->netdev[id]->irq = eth->irq;
-+ eth->netdev[id]->irq = eth->irq[0];
- netif_info(eth, probe, eth->netdev[id],
- "mediatek frame engine at 0x%08lx, irq %d\n",
-- eth->netdev[id]->base_addr, eth->netdev[id]->irq);
-+ eth->netdev[id]->base_addr, eth->irq[0]);
-
- return 0;
-
-@@ -1704,6 +1733,7 @@ static int mtk_probe(struct platform_device *pdev)
- struct mtk_soc_data *soc;
- struct mtk_eth *eth;
- int err;
-+ int i;
-
- match = of_match_device(of_mtk_match, &pdev->dev);
- soc = (struct mtk_soc_data *)match->data;
-@@ -1738,10 +1768,12 @@ static int mtk_probe(struct platform_device *pdev)
- return PTR_ERR(eth->rstc);
- }
-
-- eth->irq = platform_get_irq(pdev, 0);
-- if (eth->irq < 0) {
-- dev_err(&pdev->dev, "no IRQ resource found\n");
-- return -ENXIO;
-+ for (i = 0; i < 3; i++) {
-+ eth->irq[i] = platform_get_irq(pdev, i);
-+ if (eth->irq[i] < 0) {
-+ dev_err(&pdev->dev, "no IRQ%d resource found\n", i);
-+ return -ENXIO;
-+ }
- }
-
- eth->clk_ethif = devm_clk_get(&pdev->dev, "ethif");
-@@ -1785,6 +1817,9 @@ static int mtk_probe(struct platform_device *pdev)
- netif_napi_add(&eth->dummy_dev, &eth->rx_napi, mtk_poll,
- MTK_NAPI_WEIGHT);
-
-+ tasklet_init(&eth->tx_clean_tasklet,
-+ mtk_clean_tx_tasklet, (unsigned long)eth);
-+
- platform_set_drvdata(pdev, eth);
-
- return 0;
-diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-index eed626d..4cfb40c 100644
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -68,6 +68,10 @@
- /* Unicast Filter MAC Address Register - High */
- #define MTK_GDMA_MAC_ADRH(x) (0x50C + (x * 0x1000))
-
-+/* PDMA Interrupt grouping registers */
-+#define MTK_PDMA_INT_GRP1 0xa50
-+#define MTK_PDMA_INT_GRP2 0xa54
-+
- /* QDMA TX Queue Configuration Registers */
- #define MTK_QTX_CFG(x) (0x1800 + (x * 0x10))
- #define QDMA_RES_THRES 4
-@@ -124,6 +128,11 @@
- #define MTK_TX_DONE_INT (MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \
- MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3)
-
-+/* QDMA Interrupt grouping registers */
-+#define MTK_QDMA_INT_GRP1 0x1a20
-+#define MTK_QDMA_INT_GRP2 0x1a24
-+#define MTK_RLS_DONE_INT BIT(0)
-+
- /* QDMA Interrupt Status Register */
- #define MTK_QDMA_INT_MASK 0x1A1C
-
-@@ -374,7 +383,7 @@ struct mtk_eth {
- struct net_device dummy_dev;
- struct net_device *netdev[MTK_MAX_DEVS];
- struct mtk_mac *mac[MTK_MAX_DEVS];
-- int irq;
-+ int irq[3];
- u32 msg_enable;
- unsigned long sysclk;
- struct regmap *ethsys;
-@@ -391,6 +400,7 @@ struct mtk_eth {
- struct clk *clk_gp2;
- struct mii_bus *mii_bus;
- struct work_struct pending_work;
-+ struct tasklet_struct tx_clean_tasklet;
- };
-
- /* struct mtk_mac - the structure that holds the info about the MACs of the
---
-1.7.10.4
-
diff --git a/target/linux/mediatek/patches-4.4/0074-net-mediatek-out-of-tree-fixes.patch b/target/linux/mediatek/patches-4.4/0074-net-mediatek-out-of-tree-fixes.patch
deleted file mode 100644
index 878def40a9..0000000000
--- a/target/linux/mediatek/patches-4.4/0074-net-mediatek-out-of-tree-fixes.patch
+++ /dev/null
@@ -1,2600 +0,0 @@
-From 42fa01d00a7d14b4db1ff1e5176469d349e03d8a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 21 Mar 2016 16:36:22 +0100
-Subject: [PATCH 74/78] net: mediatek: out of tree fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/arm/boot/dts/mt7623-evb.dts | 1 -
- arch/arm/boot/dts/mt7623.dtsi | 40 +-
- drivers/net/ethernet/mediatek/Makefile | 2 +-
- drivers/net/ethernet/mediatek/gsw_mt7620.h | 250 +++++++
- drivers/net/ethernet/mediatek/gsw_mt7623.c | 1070 +++++++++++++++++++++++++++
- drivers/net/ethernet/mediatek/mt7530.c | 808 ++++++++++++++++++++
- drivers/net/ethernet/mediatek/mt7530.h | 20 +
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 107 ++-
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 5 +
- 9 files changed, 2230 insertions(+), 73 deletions(-)
- create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7620.h
- create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7623.c
- create mode 100644 drivers/net/ethernet/mediatek/mt7530.c
- create mode 100644 drivers/net/ethernet/mediatek/mt7530.h
-
-diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
-index 5e9381d..bc2b3f1 100644
---- a/arch/arm/boot/dts/mt7623-evb.dts
-+++ b/arch/arm/boot/dts/mt7623-evb.dts
-@@ -425,7 +425,6 @@
- &usb1 {
- vusb33-supply = <&mt6323_vusb_reg>;
- vbus-supply = <&usb_p1_vbus>;
--// mediatek,wakeup-src = <1>;
- status = "okay";
- };
-
-diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
-index c8c802d..f405ec7 100644
---- a/arch/arm/boot/dts/mt7623.dtsi
-+++ b/arch/arm/boot/dts/mt7623.dtsi
-@@ -453,25 +453,32 @@
- };
-
- ethsys: syscon@1b000000 {
-- #address-cells = <1>;
-- #size-cells = <1>;
- compatible = "mediatek,mt2701-ethsys", "syscon";
- reg = <0 0x1b000000 0 0x1000>;
-+ #reset-cells = <1>;
- #clock-cells = <1>;
- };
-
- eth: ethernet@1b100000 {
- compatible = "mediatek,mt7623-eth";
-- reg = <0 0x1b100000 0 0x10000>;
-+ reg = <0 0x1b100000 0 0x20000>;
-
-- clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
-- clock-names = "ethif";
-+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-+ <&ethsys CLK_ETHSYS_ESW>,
-+ <&ethsys CLK_ETHSYS_GP2>,
-+ <&ethsys CLK_ETHSYS_GP1>;
-+ clock-names = "ethif", "esw", "gp2", "gp1";
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
- GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
- GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-
-+ resets = <&ethsys 6>;
-+ reset-names = "eth";
-+
- mediatek,ethsys = <&ethsys>;
-+ mediatek,pctl = <&syscfg_pctl_a>;
-+
- mediatek,switch = <&gsw>;
-
- #address-cells = <1>;
-@@ -482,7 +489,7 @@
- gmac1: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
--
-+
- status = "disabled";
- };
-
-@@ -490,6 +497,7 @@
- compatible = "mediatek,eth-mac";
- reg = <1>;
-
-+ phy-handle = <&phy5>;
- status = "disabled";
- };
-
-@@ -497,6 +505,16 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-+ phy4: ethernet-phy@4 {
-+ reg = <4>;
-+ phy-mode = "rgmii";
-+ };
-+
-+ phy5: ethernet-phy@5 {
-+ reg = <5>;
-+ phy-mode = "rgmii";
-+ };
-+
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
-@@ -506,14 +524,12 @@
-
- gsw: switch@1b100000 {
- compatible = "mediatek,mt7623-gsw";
-- reg = <0 0x1b110000 0 0x300000>;
- interrupt-parent = <&pio>;
- interrupts = <168 IRQ_TYPE_EDGE_RISING>;
-- clocks = <&apmixedsys CLK_APMIXED_TRGPLL>,
-- <&ethsys CLK_ETHSYS_ESW>,
-- <&ethsys CLK_ETHSYS_GP2>,
-- <&ethsys CLK_ETHSYS_GP1>;
-- clock-names = "trgpll", "esw", "gp2", "gp1";
-+ resets = <&ethsys 2>;
-+ reset-names = "eth";
-+ clocks = <&apmixedsys CLK_APMIXED_TRGPLL>;
-+ clock-names = "trgpll";
- mt7530-supply = <&mt6323_vpa_reg>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- mediatek,ethsys = <&ethsys>;
-diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
-index aa3f1c8..82001c4 100644
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -2,4 +2,4 @@
- # Makefile for the Mediatek SoCs built-in ethernet macs
- #
-
--obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth_soc.o
-+obj-$(CONFIG_NET_MEDIATEK_SOC) += mt7530.o gsw_mt7623.o mtk_eth_soc.o
-diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.h b/drivers/net/ethernet/mediatek/gsw_mt7620.h
-new file mode 100644
-index 0000000..7013803
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h
-@@ -0,0 +1,250 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2016 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2016 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2016 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#ifndef _RALINK_GSW_MT7620_H__
-+#define _RALINK_GSW_MT7620_H__
-+
-+#define GSW_REG_PHY_TIMEOUT (5 * HZ)
-+
-+#define MT7620_GSW_REG_PIAC 0x0004
-+
-+#define GSW_NUM_VLANS 16
-+#define GSW_NUM_VIDS 4096
-+#define GSW_NUM_PORTS 7
-+#define GSW_PORT6 6
-+
-+#define GSW_MDIO_ACCESS BIT(31)
-+#define GSW_MDIO_READ BIT(19)
-+#define GSW_MDIO_WRITE BIT(18)
-+#define GSW_MDIO_START BIT(16)
-+#define GSW_MDIO_ADDR_SHIFT 20
-+#define GSW_MDIO_REG_SHIFT 25
-+
-+#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100))
-+#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100))
-+#define GSW_REG_SMACCR0 0x3fE4
-+#define GSW_REG_SMACCR1 0x3fE8
-+#define GSW_REG_CKGCR 0x3ff0
-+
-+#define GSW_REG_IMR 0x7008
-+#define GSW_REG_ISR 0x700c
-+#define GSW_REG_GPC1 0x7014
-+
-+#define SYSC_REG_CHIP_REV_ID 0x0c
-+#define SYSC_REG_CFG 0x10
-+#define SYSC_REG_CFG1 0x14
-+#define RST_CTRL_MCM BIT(2)
-+#define SYSC_PAD_RGMII2_MDIO 0x58
-+#define SYSC_GPIO_MODE 0x60
-+
-+#define PORT_IRQ_ST_CHG 0x7f
-+
-+#define MT7621_ESW_PHY_POLLING 0x0000
-+#define MT7620_ESW_PHY_POLLING 0x7000
-+
-+#define PMCR_IPG BIT(18)
-+#define PMCR_MAC_MODE BIT(16)
-+#define PMCR_FORCE BIT(15)
-+#define PMCR_TX_EN BIT(14)
-+#define PMCR_RX_EN BIT(13)
-+#define PMCR_BACKOFF BIT(9)
-+#define PMCR_BACKPRES BIT(8)
-+#define PMCR_RX_FC BIT(5)
-+#define PMCR_TX_FC BIT(4)
-+#define PMCR_SPEED(_x) (_x << 2)
-+#define PMCR_DUPLEX BIT(1)
-+#define PMCR_LINK BIT(0)
-+
-+#define PHY_AN_EN BIT(31)
-+#define PHY_PRE_EN BIT(30)
-+#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24)
-+
-+/* ethernet subsystem config register */
-+#define ETHSYS_SYSCFG0 0x14
-+/* ethernet subsystem clock register */
-+#define ETHSYS_CLKCFG0 0x2c
-+#define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11)
-+
-+/* p5 RGMII wrapper TX clock control register */
-+#define MT7530_P5RGMIITXCR 0x7b04
-+/* p5 RGMII wrapper RX clock control register */
-+#define MT7530_P5RGMIIRXCR 0x7b00
-+/* TRGMII TDX ODT registers */
-+#define MT7530_TRGMII_TD0_ODT 0x7a54
-+#define MT7530_TRGMII_TD1_ODT 0x7a5c
-+#define MT7530_TRGMII_TD2_ODT 0x7a64
-+#define MT7530_TRGMII_TD3_ODT 0x7a6c
-+#define MT7530_TRGMII_TD4_ODT 0x7a74
-+#define MT7530_TRGMII_TD5_ODT 0x7a7c
-+/* TRGMII TCK ctrl register */
-+#define MT7530_TRGMII_TCK_CTRL 0x7a78
-+/* TRGMII Tx ctrl register */
-+#define MT7530_TRGMII_TXCTRL 0x7a40
-+/* port 6 extended control register */
-+#define MT7530_P6ECR 0x7830
-+/* IO driver control register */
-+#define MT7530_IO_DRV_CR 0x7810
-+/* top signal control register */
-+#define MT7530_TOP_SIG_CTRL 0x7808
-+/* modified hwtrap register */
-+#define MT7530_MHWTRAP 0x7804
-+/* hwtrap status register */
-+#define MT7530_HWTRAP 0x7800
-+/* status interrupt register */
-+#define MT7530_SYS_INT_STS 0x700c
-+/* system nterrupt register */
-+#define MT7530_SYS_INT_EN 0x7008
-+/* system control register */
-+#define MT7530_SYS_CTRL 0x7000
-+/* port MAC status register */
-+#define MT7530_PMSR_P(x) (0x3008 + (x * 0x100))
-+/* port MAC control register */
-+#define MT7530_PMCR_P(x) (0x3000 + (x * 0x100))
-+
-+#define MT7621_XTAL_SHIFT 6
-+#define MT7621_XTAL_MASK 0x7
-+#define MT7621_XTAL_25 6
-+#define MT7621_XTAL_40 3
-+#define MT7621_MDIO_DRV_MASK (3 << 4)
-+#define MT7621_GE1_MODE_MASK (3 << 12)
-+
-+#define TRGMII_TXCTRL_TXC_INV BIT(30)
-+#define P6ECR_INTF_MODE_RGMII BIT(1)
-+#define P5RGMIIRXCR_C_ALIGN BIT(8)
-+#define P5RGMIIRXCR_DELAY_2 BIT(1)
-+#define P5RGMIITXCR_DELAY_2 (BIT(8) | BIT(2))
-+
-+/* TOP_SIG_CTRL bits */
-+#define TOP_SIG_CTRL_NORMAL (BIT(17) | BIT(16))
-+
-+/* MHWTRAP bits */
-+#define MHWTRAP_MANUAL BIT(16)
-+#define MHWTRAP_P5_MAC_SEL BIT(13)
-+#define MHWTRAP_P6_DIS BIT(8)
-+#define MHWTRAP_P5_RGMII_MODE BIT(7)
-+#define MHWTRAP_P5_DIS BIT(6)
-+#define MHWTRAP_PHY_ACCESS BIT(5)
-+
-+/* HWTRAP bits */
-+#define HWTRAP_XTAL_SHIFT 9
-+#define HWTRAP_XTAL_MASK 0x3
-+
-+/* SYS_CTRL bits */
-+#define SYS_CTRL_SW_RST BIT(1)
-+#define SYS_CTRL_REG_RST BIT(0)
-+
-+/* PMCR bits */
-+#define PMCR_IFG_XMIT_96 BIT(18)
-+#define PMCR_MAC_MODE BIT(16)
-+#define PMCR_FORCE_MODE BIT(15)
-+#define PMCR_TX_EN BIT(14)
-+#define PMCR_RX_EN BIT(13)
-+#define PMCR_BACK_PRES_EN BIT(9)
-+#define PMCR_BACKOFF_EN BIT(8)
-+#define PMCR_TX_FC_EN BIT(5)
-+#define PMCR_RX_FC_EN BIT(4)
-+#define PMCR_FORCE_SPEED_1000 BIT(3)
-+#define PMCR_FORCE_FDX BIT(1)
-+#define PMCR_FORCE_LNK BIT(0)
-+#define PMCR_FIXED_LINK (PMCR_IFG_XMIT_96 | PMCR_MAC_MODE | \
-+ PMCR_FORCE_MODE | PMCR_TX_EN | PMCR_RX_EN | \
-+ PMCR_BACK_PRES_EN | PMCR_BACKOFF_EN | \
-+ PMCR_FORCE_SPEED_1000 | PMCR_FORCE_FDX | \
-+ PMCR_FORCE_LNK)
-+
-+#define PMCR_FIXED_LINK_FC (PMCR_FIXED_LINK | \
-+ PMCR_TX_FC_EN | PMCR_RX_FC_EN)
-+
-+/* TRGMII control registers */
-+#define GSW_INTF_MODE 0x390
-+#define GSW_TRGMII_TD0_ODT 0x354
-+#define GSW_TRGMII_TD1_ODT 0x35c
-+#define GSW_TRGMII_TD2_ODT 0x364
-+#define GSW_TRGMII_TD3_ODT 0x36c
-+#define GSW_TRGMII_TXCTL_ODT 0x374
-+#define GSW_TRGMII_TCK_ODT 0x37c
-+#define GSW_TRGMII_RCK_CTRL 0x300
-+
-+#define INTF_MODE_TRGMII BIT(1)
-+#define TRGMII_RCK_CTRL_RX_RST BIT(31)
-+
-+
-+/* possible XTAL speed */
-+#define MT7623_XTAL_40 0
-+#define MT7623_XTAL_20 1
-+#define MT7623_XTAL_25 3
-+
-+/* GPIO port control registers */
-+#define GPIO_OD33_CTRL8 0x4c0
-+#define GPIO_BIAS_CTRL 0xed0
-+#define GPIO_DRV_SEL10 0xf00
-+
-+/* on MT7620 the functio of port 4 can be software configured */
-+enum {
-+ PORT4_EPHY = 0,
-+ PORT4_EXT,
-+};
-+
-+/* struct mt7620_gsw - the structure that holds the SoC specific data
-+ * @dev: The Device struct
-+ * @base: The base address
-+ * @piac_offset: The PIAC base may change depending on SoC
-+ * @irq: The IRQ we are using
-+ * @port4: The port4 mode on MT7620
-+ * @autopoll: Is MDIO autopolling enabled
-+ * @ethsys: The ethsys register map
-+ * @pctl: The pin control register map
-+ * @clk_trgpll: The trgmii pll clock
-+ */
-+struct mt7620_gsw {
-+ struct mtk_eth *eth;
-+ struct device *dev;
-+ void __iomem *base;
-+ u32 piac_offset;
-+ int irq;
-+ int port4;
-+ unsigned long int autopoll;
-+
-+ struct regmap *ethsys;
-+ struct regmap *pctl;
-+
-+ struct clk *clk_trgpll;
-+
-+ int trgmii_force;
-+};
-+
-+/* switch register I/O wrappers */
-+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg);
-+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg);
-+
-+/* the callback used by the driver core to bringup the switch */
-+int mtk_gsw_init(struct mtk_eth *eth);
-+
-+/* MDIO access wrappers */
-+int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
-+int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
-+void mt7620_mdio_link_adjust(struct mtk_eth *eth, int port);
-+int mt7620_has_carrier(struct mtk_eth *eth);
-+void mt7620_print_link_state(struct mtk_eth *eth, int port, int link,
-+ int speed, int duplex);
-+void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val);
-+u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg);
-+void mt7530_mdio_m32(struct mt7620_gsw *gsw, u32 mask, u32 set, u32 reg);
-+
-+u32 _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr,
-+ u32 phy_register, u32 write_data);
-+u32 _mtk_mdio_read(struct mtk_eth *eth, int phy_addr, int phy_reg);
-+void mt7620_handle_carrier(struct mtk_eth *eth);
-+
-+#endif
-diff --git a/drivers/net/ethernet/mediatek/gsw_mt7623.c b/drivers/net/ethernet/mediatek/gsw_mt7623.c
-new file mode 100644
-index 0000000..873a525
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7623.c
-@@ -0,0 +1,1070 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2016 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2016 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2016 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_gpio.h>
-+#include <linux/clk.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/mii.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/version.h>
-+#include <linux/atomic.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "gsw_mt7620.h"
-+#include "mt7530.h"
-+
-+#define ETHSYS_CLKCFG0 0x2c
-+#define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11)
-+
-+void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val)
-+{
-+ _mtk_mdio_write(gsw->eth, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ _mtk_mdio_write(gsw->eth, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
-+ _mtk_mdio_write(gsw->eth, 0x1f, 0x10, val >> 16);
-+}
-+
-+u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg)
-+{
-+ u16 high, low;
-+
-+ _mtk_mdio_write(gsw->eth, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ low = _mtk_mdio_read(gsw->eth, 0x1f, (reg >> 2) & 0xf);
-+ high = _mtk_mdio_read(gsw->eth, 0x1f, 0x10);
-+
-+ return (high << 16) | (low & 0xffff);
-+}
-+
-+void mt7530_mdio_m32(struct mt7620_gsw *gsw, u32 mask, u32 set, u32 reg)
-+{
-+ u32 val = mt7530_mdio_r32(gsw, reg);
-+
-+ val &= mask;
-+ val |= set;
-+ mt7530_mdio_w32(gsw, reg, val);
-+}
-+
-+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
-+{
-+ mtk_w32(gsw->eth, val, reg + 0x10000);
-+}
-+
-+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
-+{
-+ return mtk_r32(gsw->eth, reg + 0x10000);
-+}
-+
-+void mtk_switch_m32(struct mt7620_gsw *gsw, u32 mask, u32 set, unsigned reg)
-+{
-+ u32 val = mtk_switch_r32(gsw, reg);
-+
-+ val &= mask;
-+ val |= set;
-+
-+ mtk_switch_w32(gsw, val, reg);
-+}
-+
-+int mt7623_gsw_config(struct mtk_eth *eth)
-+{
-+ if (eth->mii_bus && eth->mii_bus->phy_map[0x1f])
-+ mt7530_probe(eth->dev, NULL, eth->mii_bus, 1);
-+
-+ return 0;
-+}
-+
-+static irqreturn_t gsw_interrupt_mt7623(int irq, void *_eth)
-+{
-+ struct mtk_eth *eth = (struct mtk_eth *)_eth;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)eth->sw_priv;
-+ u32 reg, i;
-+
-+ reg = mt7530_mdio_r32(gsw, 0x700c);
-+
-+ for (i = 0; i < 5; i++)
-+ if (reg & BIT(i)) {
-+ unsigned int link;
-+
-+ link = mt7530_mdio_r32(gsw,
-+ 0x3008 + (i * 0x100)) & 0x1;
-+
-+ if (link)
-+ dev_info(gsw->dev,
-+ "port %d link up\n", i);
-+ else
-+ dev_info(gsw->dev,
-+ "port %d link down\n", i);
-+ }
-+
-+// mt7620_handle_carrier(eth);
-+ mt7530_mdio_w32(gsw, 0x700c, 0x1f);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void wait_loop(struct mt7620_gsw *gsw)
-+{
-+ int i;
-+ int read_data;
-+
-+ for (i = 0; i < 320; i = i + 1)
-+ read_data = mtk_switch_r32(gsw, 0x610);
-+}
-+
-+static void trgmii_calibration_7623(struct mt7620_gsw *gsw)
-+{
-+
-+ unsigned int tap_a[5] = { 0, 0, 0, 0, 0 }; /* minumum delay for all correct */
-+ unsigned int tap_b[5] = { 0, 0, 0, 0, 0 }; /* maximum delay for all correct */
-+ unsigned int final_tap[5];
-+ unsigned int rxc_step_size;
-+ unsigned int rxd_step_size;
-+ unsigned int read_data;
-+ unsigned int tmp;
-+ unsigned int rd_wd;
-+ int i;
-+ unsigned int err_cnt[5];
-+ unsigned int init_toggle_data;
-+ unsigned int err_flag[5];
-+ unsigned int err_total_flag;
-+ unsigned int training_word;
-+ unsigned int rd_tap;
-+ u32 val;
-+
-+ u32 TRGMII_7623_base;
-+ u32 TRGMII_7623_RD_0;
-+ u32 TRGMII_RCK_CTRL;
-+
-+ TRGMII_7623_base = 0x300; /* 0xFB110300 */
-+ TRGMII_7623_RD_0 = TRGMII_7623_base + 0x10;
-+ TRGMII_RCK_CTRL = TRGMII_7623_base;
-+ rxd_step_size = 0x1;
-+ rxc_step_size = 0x4;
-+ init_toggle_data = 0x00000055;
-+ training_word = 0x000000AC;
-+
-+ /* RX clock gating in MT7623 */
-+ mtk_switch_m32(gsw, 0x3fffffff, 0, TRGMII_7623_base + 0x04);
-+
-+ /* Assert RX reset in MT7623 */
-+ mtk_switch_m32(gsw, 0, 0x80000000, TRGMII_7623_base + 0x00);
-+
-+ /* Set TX OE edge in MT7623 */
-+ mtk_switch_m32(gsw, 0, 0x00002000, TRGMII_7623_base + 0x78);
-+
-+ /* Disable RX clock gating in MT7623 */
-+ mtk_switch_m32(gsw, 0, 0xC0000000, TRGMII_7623_base + 0x04);
-+
-+ /* Release RX reset in MT7623 */
-+ mtk_switch_m32(gsw, 0x7fffffff, 0, TRGMII_7623_base);
-+
-+ for (i = 0; i < 5; i++)
-+ mtk_switch_m32(gsw, 0, 0x80000000, TRGMII_7623_RD_0 + i * 8);
-+
-+ pr_err("Enable Training Mode in MT7530\n");
-+ read_data = mt7530_mdio_r32(gsw, 0x7A40);
-+ read_data |= 0xC0000000;
-+ mt7530_mdio_w32(gsw, 0x7A40, read_data); /* Enable Training Mode in MT7530 */
-+ err_total_flag = 0;
-+ pr_err("Adjust RXC delay in MT7623\n");
-+ read_data = 0x0;
-+ while (err_total_flag == 0 && read_data != 0x68) {
-+ pr_err("2nd Enable EDGE CHK in MT7623\n");
-+ /* Enable EDGE CHK in MT7623 */
-+ for (i = 0; i < 5; i++)
-+ mtk_switch_m32(gsw, 0x4fffffff, 0x40000000, TRGMII_7623_RD_0 + i * 8);
-+
-+ wait_loop(gsw);
-+ err_total_flag = 1;
-+ for (i = 0; i < 5; i++) {
-+ err_cnt[i] =
-+ mtk_switch_r32(gsw, TRGMII_7623_RD_0 + i * 8) >> 8;
-+ err_cnt[i] &= 0x0000000f;
-+ rd_wd = mtk_switch_r32(gsw, TRGMII_7623_RD_0 + i * 8) >> 16;
-+ rd_wd &= 0x000000ff;
-+ val = mtk_switch_r32(gsw, TRGMII_7623_RD_0 + i * 8);
-+ pr_err("ERR_CNT = %d, RD_WD =%x, TRGMII_7623_RD_0=%x\n",
-+ err_cnt[i], rd_wd, val);
-+ if (err_cnt[i] != 0) {
-+ err_flag[i] = 1;
-+ } else if (rd_wd != 0x55) {
-+ err_flag[i] = 1;
-+ } else {
-+ err_flag[i] = 0;
-+ }
-+ err_total_flag = err_flag[i] & err_total_flag;
-+ }
-+
-+ pr_err("2nd Disable EDGE CHK in MT7623\n");
-+ /* Disable EDGE CHK in MT7623 */
-+ for (i = 0; i < 5; i++)
-+ mtk_switch_m32(gsw, 0x4fffffff, 0x40000000, TRGMII_7623_RD_0 + i * 8);
-+ wait_loop(gsw);
-+ pr_err("2nd Disable EDGE CHK in MT7623\n");
-+ /* Adjust RXC delay */
-+ /* RX clock gating in MT7623 */
-+ mtk_switch_m32(gsw, 0x3fffffff, 0, TRGMII_7623_base + 0x04);
-+ read_data = mtk_switch_r32(gsw, TRGMII_7623_base);
-+ if (err_total_flag == 0) {
-+ tmp = (read_data & 0x0000007f) + rxc_step_size;
-+ pr_err(" RXC delay = %d\n", tmp);
-+ read_data >>= 8;
-+ read_data &= 0xffffff80;
-+ read_data |= tmp;
-+ read_data <<= 8;
-+ read_data &= 0xffffff80;
-+ read_data |= tmp;
-+ mtk_switch_w32(gsw, read_data, TRGMII_7623_base);
-+ } else {
-+ tmp = (read_data & 0x0000007f) + 16;
-+ pr_err(" RXC delay = %d\n", tmp);
-+ read_data >>= 8;
-+ read_data &= 0xffffff80;
-+ read_data |= tmp;
-+ read_data <<= 8;
-+ read_data &= 0xffffff80;
-+ read_data |= tmp;
-+ mtk_switch_w32(gsw, read_data, TRGMII_7623_base);
-+ }
-+ read_data &= 0x000000ff;
-+
-+ /* Disable RX clock gating in MT7623 */
-+ mtk_switch_m32(gsw, 0, 0xC0000000, TRGMII_7623_base + 0x04);
-+ for (i = 0; i < 5; i++)
-+ mtk_switch_m32(gsw, 0, 0x80000000, TRGMII_7623_RD_0 + i * 8);
-+ }
-+
-+ /* Read RD_WD MT7623 */
-+ for (i = 0; i < 5; i++) {
-+ rd_tap = 0;
-+ while (err_flag[i] != 0 && rd_tap != 128) {
-+ /* Enable EDGE CHK in MT7623 */
-+ mtk_switch_m32(gsw, 0x4fffffff, 0x40000000, TRGMII_7623_RD_0 + i * 8);
-+ wait_loop(gsw);
-+
-+ read_data = mtk_switch_r32(gsw, TRGMII_7623_RD_0 + i * 8);
-+ err_cnt[i] = (read_data >> 8) & 0x0000000f; /* Read MT7623 Errcnt */
-+ rd_wd = (read_data >> 16) & 0x000000ff;
-+ if (err_cnt[i] != 0 || rd_wd != 0x55) {
-+ err_flag[i] = 1;
-+ } else {
-+ err_flag[i] = 0;
-+ }
-+ /* Disable EDGE CHK in MT7623 */
-+ mtk_switch_m32(gsw, 0x4fffffff, 0x40000000, TRGMII_7623_RD_0 + i * 8);
-+ wait_loop(gsw);
-+ if (err_flag[i] != 0) {
-+ rd_tap = (read_data & 0x0000007f) + rxd_step_size; /* Add RXD delay in MT7623 */
-+ read_data = (read_data & 0xffffff80) | rd_tap;
-+ mtk_switch_w32(gsw, read_data,
-+ TRGMII_7623_RD_0 + i * 8);
-+ tap_a[i] = rd_tap;
-+ } else {
-+ rd_tap = (read_data & 0x0000007f) + 48;
-+ read_data = (read_data & 0xffffff80) | rd_tap;
-+ mtk_switch_w32(gsw, read_data,
-+ TRGMII_7623_RD_0 + i * 8);
-+ }
-+
-+ }
-+ pr_err("MT7623 %dth bit Tap_a = %d\n", i, tap_a[i]);
-+ }
-+ /* pr_err("Last While Loop\n"); */
-+ for (i = 0; i < 5; i++) {
-+ while ((err_flag[i] == 0) && (rd_tap != 128)) {
-+ read_data = mtk_switch_r32(gsw, TRGMII_7623_RD_0 + i * 8);
-+ rd_tap = (read_data & 0x0000007f) + rxd_step_size; /* Add RXD delay in MT7623 */
-+ read_data = (read_data & 0xffffff80) | rd_tap;
-+ mtk_switch_w32(gsw, read_data, TRGMII_7623_RD_0 + i * 8);
-+ /* Enable EDGE CHK in MT7623 */
-+ val =
-+ mtk_switch_r32(gsw, TRGMII_7623_RD_0 + i * 8) | 0x40000000;
-+ val &= 0x4fffffff;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_RD_0 + i * 8);
-+ wait_loop(gsw);
-+ read_data = mtk_switch_r32(gsw, TRGMII_7623_RD_0 + i * 8);
-+ err_cnt[i] = (read_data >> 8) & 0x0000000f; /* Read MT7623 Errcnt */
-+ rd_wd = (read_data >> 16) & 0x000000ff;
-+ if (err_cnt[i] != 0 || rd_wd != 0x55) {
-+ err_flag[i] = 1;
-+ } else {
-+ err_flag[i] = 0;
-+ }
-+
-+ /* Disable EDGE CHK in MT7623 */
-+ mtk_switch_m32(gsw, 0x4fffffff, 0x40000000, TRGMII_7623_RD_0 + i * 8);
-+ wait_loop(gsw);
-+
-+ }
-+
-+ tap_b[i] = rd_tap; /* -rxd_step_size; */
-+ pr_err("MT7623 %dth bit Tap_b = %d\n", i, tap_b[i]);
-+ final_tap[i] = (tap_a[i] + tap_b[i]) / 2; /* Calculate RXD delay = (TAP_A + TAP_B)/2 */
-+ read_data = (read_data & 0xffffff80) | final_tap[i];
-+ mtk_switch_w32(gsw, read_data, TRGMII_7623_RD_0 + i * 8);
-+ }
-+
-+ read_data = mt7530_mdio_r32(gsw, 0x7A40);
-+ read_data &= 0x3fffffff;
-+ mt7530_mdio_w32(gsw, 0x7A40, read_data);
-+}
-+
-+static void trgmii_calibration_7530(struct mt7620_gsw *gsw)
-+{
-+
-+ unsigned int tap_a[5] = { 0, 0, 0, 0, 0 };
-+ unsigned int tap_b[5] = { 0, 0, 0, 0, 0 };
-+ unsigned int final_tap[5];
-+ unsigned int rxc_step_size;
-+ unsigned int rxd_step_size;
-+ unsigned int read_data;
-+ unsigned int tmp = 0;
-+ int i;
-+ unsigned int err_cnt[5];
-+ unsigned int rd_wd;
-+ unsigned int init_toggle_data;
-+ unsigned int err_flag[5];
-+ unsigned int err_total_flag;
-+ unsigned int training_word;
-+ unsigned int rd_tap;
-+
-+ u32 TRGMII_7623_base;
-+ u32 TRGMII_7530_RD_0;
-+ u32 TRGMII_RCK_CTRL;
-+ u32 TRGMII_7530_base;
-+ u32 TRGMII_7530_TX_base;
-+ u32 val;
-+
-+ TRGMII_7623_base = 0x300;
-+ TRGMII_7530_base = 0x7A00;
-+ TRGMII_7530_RD_0 = TRGMII_7530_base + 0x10;
-+ TRGMII_RCK_CTRL = TRGMII_7623_base;
-+ rxd_step_size = 0x1;
-+ rxc_step_size = 0x8;
-+ init_toggle_data = 0x00000055;
-+ training_word = 0x000000AC;
-+
-+ TRGMII_7530_TX_base = TRGMII_7530_base + 0x50;
-+
-+ /* pr_err("Calibration begin ........\n"); */
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x40) | 0x80000000;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x40);
-+ read_data = mt7530_mdio_r32(gsw, 0x7a10);
-+ /* pr_err("TRGMII_7530_RD_0 is %x\n", read_data); */
-+
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base + 0x04);
-+ read_data &= 0x3fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base + 0x04, read_data); /* RX clock gating in MT7530 */
-+
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base + 0x78);
-+ read_data |= 0x00002000;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base + 0x78, read_data); /* Set TX OE edge in MT7530 */
-+
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base);
-+ read_data |= 0x80000000;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base, read_data); /* Assert RX reset in MT7530 */
-+
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base);
-+ read_data &= 0x7fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base, read_data); /* Release RX reset in MT7530 */
-+
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base + 0x04);
-+ read_data |= 0xC0000000;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base + 0x04, read_data); /* Disable RX clock gating in MT7530 */
-+
-+ /* pr_err("Enable Training Mode in MT7623\n"); */
-+ /*Enable Training Mode in MT7623 */
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x40) | 0x80000000;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x40);
-+ if (gsw->trgmii_force == 2000) {
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x40) | 0xC0000000;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x40);
-+ } else {
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x40) | 0x80000000;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x40);
-+ }
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x078) & 0xfffff0ff;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x078);
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x50) & 0xfffff0ff;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x50);
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x58) & 0xfffff0ff;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x58);
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x60) & 0xfffff0ff;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x60);
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x68) & 0xfffff0ff;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x68);
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x70) & 0xfffff0ff;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x70);
-+ val = mtk_switch_r32(gsw, TRGMII_7623_base + 0x78) & 0x00000800;
-+ mtk_switch_w32(gsw, val, TRGMII_7623_base + 0x78);
-+ err_total_flag = 0;
-+ /* pr_err("Adjust RXC delay in MT7530\n"); */
-+ read_data = 0x0;
-+ while (err_total_flag == 0 && (read_data != 0x68)) {
-+ /* pr_err("2nd Enable EDGE CHK in MT7530\n"); */
-+ /* Enable EDGE CHK in MT7530 */
-+ for (i = 0; i < 5; i++) {
-+ read_data =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_RD_0 + i * 8);
-+ read_data |= 0x40000000;
-+ read_data &= 0x4fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ wait_loop(gsw);
-+ /* pr_err("2nd Disable EDGE CHK in MT7530\n"); */
-+ err_cnt[i] =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_RD_0 + i * 8);
-+ /* pr_err("***** MT7530 %dth bit ERR_CNT =%x\n",i, err_cnt[i]); */
-+ /* pr_err("MT7530 %dth bit ERR_CNT =%x\n",i, err_cnt[i]); */
-+ err_cnt[i] >>= 8;
-+ err_cnt[i] &= 0x0000ff0f;
-+ rd_wd = err_cnt[i] >> 8;
-+ rd_wd &= 0x000000ff;
-+ err_cnt[i] &= 0x0000000f;
-+ /* read_data = mt7530_mdio_r32(gsw,0x7a10,&read_data); */
-+ if (err_cnt[i] != 0) {
-+ err_flag[i] = 1;
-+ } else if (rd_wd != 0x55) {
-+ err_flag[i] = 1;
-+ } else {
-+ err_flag[i] = 0;
-+ }
-+ if (i == 0) {
-+ err_total_flag = err_flag[i];
-+ } else {
-+ err_total_flag = err_flag[i] & err_total_flag;
-+ }
-+ /* Disable EDGE CHK in MT7530 */
-+ read_data =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_RD_0 + i * 8);
-+ read_data |= 0x40000000;
-+ read_data &= 0x4fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ wait_loop(gsw);
-+ }
-+ /*Adjust RXC delay */
-+ if (err_total_flag == 0) {
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base);
-+ read_data |= 0x80000000;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base, read_data); /* Assert RX reset in MT7530 */
-+
-+ read_data =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_base + 0x04);
-+ read_data &= 0x3fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base + 0x04, read_data); /* RX clock gating in MT7530 */
-+
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base);
-+ tmp = read_data;
-+ tmp &= 0x0000007f;
-+ tmp += rxc_step_size;
-+ /* pr_err("Current rxc delay = %d\n", tmp); */
-+ read_data &= 0xffffff80;
-+ read_data |= tmp;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base, read_data);
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base);
-+ /* pr_err("Current RXC delay = %x\n", read_data); */
-+
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_base);
-+ read_data &= 0x7fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base, read_data); /* Release RX reset in MT7530 */
-+
-+ read_data =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_base + 0x04);
-+ read_data |= 0xc0000000;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_base + 0x04, read_data); /* Disable RX clock gating in MT7530 */
-+ pr_err("####### MT7530 RXC delay is %d\n", tmp);
-+ }
-+ read_data = tmp;
-+ }
-+ pr_err("Finish RXC Adjustment while loop\n");
-+
-+ /* pr_err("Read RD_WD MT7530\n"); */
-+ /* Read RD_WD MT7530 */
-+ for (i = 0; i < 5; i++) {
-+ rd_tap = 0;
-+ while (err_flag[i] != 0 && rd_tap != 128) {
-+ /* Enable EDGE CHK in MT7530 */
-+ read_data =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_RD_0 + i * 8);
-+ read_data |= 0x40000000;
-+ read_data &= 0x4fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ wait_loop(gsw);
-+ err_cnt[i] = (read_data >> 8) & 0x0000000f;
-+ rd_wd = (read_data >> 16) & 0x000000ff;
-+ if (err_cnt[i] != 0 || rd_wd != 0x55) {
-+ err_flag[i] = 1;
-+ } else {
-+ err_flag[i] = 0;
-+ }
-+ if (err_flag[i] != 0) {
-+ rd_tap = (read_data & 0x0000007f) + rxd_step_size; /* Add RXD delay in MT7530 */
-+ read_data = (read_data & 0xffffff80) | rd_tap;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ tap_a[i] = rd_tap;
-+ } else {
-+ tap_a[i] = (read_data & 0x0000007f); /* Record the min delay TAP_A */
-+ rd_tap = tap_a[i] + 0x4;
-+ read_data = (read_data & 0xffffff80) | rd_tap;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ }
-+
-+ /* Disable EDGE CHK in MT7530 */
-+ read_data =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_RD_0 + i * 8);
-+ read_data |= 0x40000000;
-+ read_data &= 0x4fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ wait_loop(gsw);
-+
-+ }
-+ pr_err("MT7530 %dth bit Tap_a = %d\n", i, tap_a[i]);
-+ }
-+
-+ /* pr_err("Last While Loop\n"); */
-+ for (i = 0; i < 5; i++) {
-+ rd_tap = 0;
-+ while (err_flag[i] == 0 && (rd_tap != 128)) {
-+ /* Enable EDGE CHK in MT7530 */
-+ read_data = mt7530_mdio_r32(gsw, TRGMII_7530_RD_0 + i * 8);
-+ read_data |= 0x40000000;
-+ read_data &= 0x4fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ wait_loop(gsw);
-+ err_cnt[i] = (read_data >> 8) & 0x0000000f;
-+ rd_wd = (read_data >> 16) & 0x000000ff;
-+ if (err_cnt[i] != 0 || rd_wd != 0x55)
-+ err_flag[i] = 1;
-+ else
-+ err_flag[i] = 0;
-+
-+ if (err_flag[i] == 0 && (rd_tap != 128)) {
-+ /* Add RXD delay in MT7530 */
-+ rd_tap = (read_data & 0x0000007f) + rxd_step_size;
-+ read_data = (read_data & 0xffffff80) | rd_tap;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ }
-+ /* Disable EDGE CHK in MT7530 */
-+ read_data =
-+ mt7530_mdio_r32(gsw, TRGMII_7530_RD_0 + i * 8);
-+ read_data |= 0x40000000;
-+ read_data &= 0x4fffffff;
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8,
-+ read_data);
-+ wait_loop(gsw);
-+ }
-+ tap_b[i] = rd_tap; /* - rxd_step_size; */
-+ pr_err("MT7530 %dth bit Tap_b = %d\n", i, tap_b[i]);
-+ /* Calculate RXD delay = (TAP_A + TAP_B)/2 */
-+ final_tap[i] = (tap_a[i] + tap_b[i]) / 2;
-+ /* pr_err("########****** MT7530 %dth bit Final Tap = %d\n", i, final_tap[i]); */
-+
-+ read_data = (read_data & 0xffffff80) | final_tap[i];
-+ mt7530_mdio_w32(gsw, TRGMII_7530_RD_0 + i * 8, read_data);
-+ }
-+
-+ if (gsw->trgmii_force == 2000)
-+ mtk_switch_m32(gsw, 0x7fffffff, 0, TRGMII_7623_base + 0x40);
-+ else
-+ mtk_switch_m32(gsw, 0x3fffffff, 0, TRGMII_7623_base + 0x40);
-+
-+}
-+
-+static void mt7530_trgmii_clock_setting(struct mt7620_gsw *gsw, u32 xtal_mode)
-+{
-+
-+ u32 regValue;
-+
-+ /* TRGMII Clock */
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x410);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x1);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x404);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+
-+ if (xtal_mode == 1) {
-+ /* 25MHz */
-+ if (gsw->trgmii_force == 2600)
-+ /* 325MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x1a00);
-+ else if (gsw->trgmii_force == 2000)
-+ /* 250MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x1400);
-+ } else if (xtal_mode == 2) {
-+ /* 40MHz */
-+ if (gsw->trgmii_force == 2600)
-+ /* 325MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x1040);
-+ else if (gsw->trgmii_force == 2000)
-+ /* 250MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x0c80);
-+ }
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x405);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x0);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x409);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ if (xtal_mode == 1)
-+ /* 25MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x0057);
-+ else
-+ /* 40MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x0087);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x40a);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ if (xtal_mode == 1)
-+ /* 25MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x0057);
-+ else
-+ /* 40MHz */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x0087);
-+
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x403);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x1800);
-+
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x403);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x1c00);
-+
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x401);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0xc020);
-+
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x406);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0xa030);
-+
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x406);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0xa038);
-+
-+// udelay(120); /* for MT7623 bring up test */
-+
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x410);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x3);
-+
-+ regValue = mt7530_mdio_r32(gsw, 0x7830);
-+ regValue &= 0xFFFFFFFC;
-+ regValue |= 0x00000001;
-+ mt7530_mdio_w32(gsw, 0x7830, regValue);
-+
-+ regValue = mt7530_mdio_r32(gsw, 0x7a40);
-+ regValue &= ~(0x1 << 30);
-+ regValue &= ~(0x1 << 28);
-+ mt7530_mdio_w32(gsw, 0x7a40, regValue);
-+
-+ mt7530_mdio_w32(gsw, 0x7a78, 0x55);
-+// udelay(100); /* for mt7623 bring up test */
-+
-+ mtk_switch_m32(gsw, 0x7fffffff, 0, 0x300);
-+
-+ trgmii_calibration_7623(gsw);
-+ trgmii_calibration_7530(gsw);
-+
-+ mtk_switch_m32(gsw, 0, 0x80000000, 0x300);
-+ mtk_switch_m32(gsw, 0, 0x7fffffff, 0x300);
-+
-+ /*MT7530 RXC reset */
-+ regValue = mt7530_mdio_r32(gsw, 0x7a00);
-+ regValue |= (0x1 << 31);
-+ mt7530_mdio_w32(gsw, 0x7a00, regValue);
-+ mdelay(1);
-+ regValue &= ~(0x1 << 31);
-+ mt7530_mdio_w32(gsw, 0x7a00, regValue);
-+ mdelay(100);
-+}
-+
-+static void mt7623_hw_init(struct mtk_eth *eth, struct mt7620_gsw *gsw, struct device_node *np)
-+{
-+ u32 i;
-+ u32 val;
-+ u32 xtal_mode;
-+
-+ regmap_update_bits(gsw->ethsys, ETHSYS_CLKCFG0,
-+ ETHSYS_TRGMII_CLK_SEL362_5,
-+ ETHSYS_TRGMII_CLK_SEL362_5);
-+
-+ /* reset the TRGMII core */
-+ mtk_switch_m32(gsw, 0, INTF_MODE_TRGMII, GSW_INTF_MODE);
-+ mtk_switch_m32(gsw, 0, TRGMII_RCK_CTRL_RX_RST, GSW_TRGMII_RCK_CTRL);
-+
-+ /* Hardware reset Switch */
-+ device_reset(eth->dev);
-+
-+ /* Wait for Switch Reset Completed*/
-+ for (i = 0; i < 100; i++) {
-+ mdelay(10);
-+ if (mt7530_mdio_r32(gsw, MT7530_HWTRAP))
-+ break;
-+ }
-+
-+ /* turn off all PHYs */
-+ for (i = 0; i <= 4; i++) {
-+ val = _mtk_mdio_read(gsw->eth, i, 0x0);
-+ val |= BIT(11);
-+ _mtk_mdio_write(gsw->eth, i, 0x0, val);
-+ }
-+
-+ /* reset the switch */
-+ mt7530_mdio_w32(gsw, MT7530_SYS_CTRL,
-+ SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
-+ udelay(100);
-+
-+ /* GE1, Force 1000M/FD, FC ON */
-+ mt7530_mdio_w32(gsw, MT7530_PMCR_P(6), PMCR_FIXED_LINK_FC);
-+
-+ /* GE2, Force 1000M/FD, FC ON */
-+ mt7530_mdio_w32(gsw, MT7530_PMCR_P(5), PMCR_FIXED_LINK_FC);
-+
-+ /* Enable Port 6, P5 as GMAC5, P5 disable */
-+ val = mt7530_mdio_r32(gsw, MT7530_MHWTRAP);
-+ /* Enable Port 6 */
-+ val &= ~MHWTRAP_P6_DIS;
-+ /* Enable Port 5 */
-+ val &= ~MHWTRAP_P5_DIS;
-+ /* Port 5 as GMAC */
-+ val |= MHWTRAP_P5_MAC_SEL;
-+ /* Port 5 Interface mode */
-+ val |= MHWTRAP_P5_RGMII_MODE;
-+ /* Set MT7530 phy direct access mode**/
-+ val &= ~MHWTRAP_PHY_ACCESS;
-+ val |= MHWTRAP_PHY_ACCESS;
-+ /* manual override of HW-Trap */
-+ val |= MHWTRAP_MANUAL;
-+ mt7530_mdio_w32(gsw, MT7530_MHWTRAP, val);
-+
-+ val = mt7530_mdio_r32(gsw, 0x7800);
-+ val = (val >> 9) & 0x3;
-+ pr_err("!!%s: Mhz value= %d\n", __func__, val);
-+ if (val == 0x3) {
-+ xtal_mode = 1;
-+ /* 25Mhz Xtal - do nothing */
-+ } else if (val == 0x2) {
-+ /* 40Mhz */
-+ xtal_mode = 2;
-+
-+ /* disable MT7530 core clock */
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x410);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x0);
-+
-+ /* disable MT7530 PLL */
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x40d);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x2020);
-+
-+ /* for MT7530 core clock = 500Mhz */
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x40e);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x119);
-+
-+ /* enable MT7530 PLL */
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x40d);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x2820);
-+
-+ udelay(20);
-+
-+ /* enable MT7530 core clock */
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x1f);
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x410);
-+ _mtk_mdio_write(gsw->eth, 0, 13, 0x401f);
-+ } else {
-+ xtal_mode = 3;
-+ /* 20Mhz Xtal - TODO */
-+ }
-+
-+ /* RGMII */
-+ _mtk_mdio_write(gsw->eth, 0, 14, 0x1);
-+
-+ /* set MT7530 central align */
-+ val = mt7530_mdio_r32(gsw, 0x7830);
-+ val &= ~1;
-+ val |= 1<<1;
-+ mt7530_mdio_w32(gsw, 0x7830, val);
-+
-+ val = mt7530_mdio_r32(gsw, 0x7a40);
-+ val &= ~(1<<30);
-+ mt7530_mdio_w32(gsw, 0x7a40, val);
-+
-+ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
-+
-+ /* delay setting for 10/1000M */
-+ mt7530_mdio_w32(gsw, 0x7b00, 0x104);
-+ mt7530_mdio_w32(gsw, 0x7b04, 0x10);
-+
-+ /* lower Tx Driving */
-+ mt7530_mdio_w32(gsw, 0x7a54, 0x88);
-+ mt7530_mdio_w32(gsw, 0x7a5c, 0x88);
-+ mt7530_mdio_w32(gsw, 0x7a64, 0x88);
-+ mt7530_mdio_w32(gsw, 0x7a6c, 0x88);
-+ mt7530_mdio_w32(gsw, 0x7a74, 0x88);
-+ mt7530_mdio_w32(gsw, 0x7a7c, 0x88);
-+ mt7530_mdio_w32(gsw, 0x7810, 0x11);
-+
-+ /* Set MT7623/MT7683 TX Driving */
-+ mtk_switch_w32(gsw, 0x88, 0x354);
-+ mtk_switch_w32(gsw, 0x88, 0x35c);
-+ mtk_switch_w32(gsw, 0x88, 0x364);
-+ mtk_switch_w32(gsw, 0x88, 0x36c);
-+ mtk_switch_w32(gsw, 0x88, 0x374);
-+ mtk_switch_w32(gsw, 0x88, 0x37c);
-+
-+ /* Set GE2 driving and slew rate */
-+ regmap_write(gsw->pctl, 0xF00, 0xe00);
-+ /* set GE2 TDSEL */
-+ regmap_write(gsw->pctl, 0x4C0, 0x5);
-+ /* set GE2 TUNE */
-+ regmap_write(gsw->pctl, 0xED0, 0x0);
-+
-+
-+ mt7530_trgmii_clock_setting(gsw, xtal_mode);
-+
-+ //LANWANPartition(gsw);
-+
-+ /* disable EEE */
-+ for (i = 0; i <= 4; i++) {
-+ _mtk_mdio_write(gsw->eth, i, 13, 0x7);
-+ _mtk_mdio_write(gsw->eth, i, 14, 0x3C);
-+ _mtk_mdio_write(gsw->eth, i, 13, 0x4007);
-+ _mtk_mdio_write(gsw->eth, i, 14, 0x0);
-+
-+ /* Increase SlvDPSready time */
-+ _mtk_mdio_write(gsw->eth, i, 31, 0x52b5);
-+ _mtk_mdio_write(gsw->eth, i, 16, 0xafae);
-+ _mtk_mdio_write(gsw->eth, i, 18, 0x2f);
-+ _mtk_mdio_write(gsw->eth, i, 16, 0x8fae);
-+
-+ /* Incease post_update_timer */
-+ _mtk_mdio_write(gsw->eth, i, 31, 0x3);
-+ _mtk_mdio_write(gsw->eth, i, 17, 0x4b);
-+
-+ /* Adjust 100_mse_threshold */
-+ _mtk_mdio_write(gsw->eth, i, 13, 0x1e);
-+ _mtk_mdio_write(gsw->eth, i, 14, 0x123);
-+ _mtk_mdio_write(gsw->eth, i, 13, 0x401e);
-+ _mtk_mdio_write(gsw->eth, i, 14, 0xffff);
-+
-+ /* Disable mcc */
-+ _mtk_mdio_write(gsw->eth, i, 13, 0x1e);
-+ _mtk_mdio_write(gsw->eth, i, 14, 0xa6);
-+ _mtk_mdio_write(gsw->eth, i, 13, 0x401e);
-+ _mtk_mdio_write(gsw->eth, i, 14, 0x300);
-+
-+ /* Disable HW auto downshift*/
-+ _mtk_mdio_write(gsw->eth, i, 31, 0x1);
-+ val = _mtk_mdio_read(gsw->eth, i, 0x14);
-+ val &= ~(1<<4);
-+ _mtk_mdio_write(gsw->eth, i, 0x14, val);
-+ }
-+
-+ /* turn on all PHYs */
-+ for (i = 0; i <= 4; i++) {
-+ val = _mtk_mdio_read(gsw->eth, i, 0);
-+ val &= ~BIT(11);
-+ _mtk_mdio_write(gsw->eth, i, 0, val);
-+ }
-+
-+ /* enable irq */
-+ mt7530_mdio_m32(gsw, 0, TOP_SIG_CTRL_NORMAL, MT7530_TOP_SIG_CTRL);
-+
-+ /* enable autopolling */
-+ if (gsw->eth->mac[1] && gsw->eth->mac[1]->phy_dev) {
-+ val = mtk_switch_r32(gsw, 0);
-+ val |= (1<<31);
-+ val &= ~(0x1f);
-+ val &= ~(0x1f<<8);
-+ val |= 4;
-+ val |= 5 << 8;
-+ mtk_switch_w32(gsw, val, 0);
-+
-+ val = _mtk_mdio_read(gsw->eth, 5, 4);
-+ val |= BIT(10);
-+ _mtk_mdio_write(gsw->eth, 5, 4, val);
-+ val = _mtk_mdio_read(gsw->eth, 5, 0);
-+ val |= BIT(9);
-+ _mtk_mdio_write(gsw->eth, 5, 0, val);
-+ }
-+}
-+
-+static const struct of_device_id mediatek_gsw_match[] = {
-+ { .compatible = "mediatek,mt7623-gsw" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
-+
-+int mtk_gsw_init(struct mtk_eth *eth)
-+{
-+ struct device_node *np = eth->switch_np;
-+ struct platform_device *pdev = of_find_device_by_node(np);
-+ struct mt7620_gsw *gsw;
-+
-+ if (!pdev)
-+ return -ENODEV;
-+
-+ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
-+ return -EINVAL;
-+
-+ gsw = platform_get_drvdata(pdev);
-+ if (!gsw)
-+ return -ENODEV;
-+ gsw->eth = eth;
-+ eth->sw_priv = gsw;
-+
-+ mt7623_hw_init(eth, gsw, np);
-+
-+ request_threaded_irq(gsw->irq, gsw_interrupt_mt7623, NULL, 0,
-+ "gsw", eth);
-+ mt7530_mdio_w32(gsw, 0x7008, 0x1f);
-+
-+ return 0;
-+}
-+
-+static int mt7623_gsw_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *pctl;
-+ int reset_pin, ret;
-+ struct mt7620_gsw *gsw;
-+ struct regulator *supply;
-+
-+ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
-+ if (!gsw)
-+ return -ENOMEM;
-+
-+ gsw->dev = &pdev->dev;
-+ gsw->trgmii_force = 2000;
-+ gsw->irq = irq_of_parse_and_map(np, 0);
-+ if (gsw->irq < 0)
-+ return -EINVAL;
-+
-+ gsw->ethsys = syscon_regmap_lookup_by_phandle(np, "mediatek,ethsys");
-+ if (IS_ERR(gsw->ethsys))
-+ return PTR_ERR(gsw->ethsys);
-+
-+ reset_pin = of_get_named_gpio(np, "mediatek,reset-pin", 0);
-+ if (reset_pin < 0)
-+ return reset_pin;
-+
-+ pctl = of_parse_phandle(np, "mediatek,pctl-regmap", 0);
-+ if (IS_ERR(pctl))
-+ return PTR_ERR(pctl);
-+
-+ gsw->pctl = syscon_node_to_regmap(pctl);
-+ if (IS_ERR(pctl))
-+ return PTR_ERR(pctl);
-+
-+ ret = devm_gpio_request(&pdev->dev, reset_pin, "mt7530-reset");
-+ if (ret)
-+ return ret;
-+
-+ gsw->clk_trgpll = devm_clk_get(&pdev->dev, "trgpll");
-+
-+ if (IS_ERR(gsw->clk_trgpll))
-+ return -ENODEV;
-+
-+ supply = devm_regulator_get(&pdev->dev, "mt7530");
-+ if (IS_ERR(supply))
-+ return PTR_ERR(supply);
-+
-+ regulator_set_voltage(supply, 1000000, 1000000);
-+ ret = regulator_enable(supply);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to enable reg-7530: %d\n", ret);
-+ return ret;
-+ }
-+ pm_runtime_enable(&pdev->dev);
-+ pm_runtime_get_sync(&pdev->dev);
-+
-+ ret = clk_set_rate(gsw->clk_trgpll, 500000000);
-+ if (ret)
-+ return ret;
-+
-+ clk_prepare_enable(gsw->clk_trgpll);
-+
-+ gpio_direction_output(reset_pin, 0);
-+ udelay(1000);
-+ gpio_set_value(reset_pin, 1);
-+ mdelay(100);
-+
-+ platform_set_drvdata(pdev, gsw);
-+
-+ return 0;
-+}
-+
-+static int mt7623_gsw_remove(struct platform_device *pdev)
-+{
-+ struct mt7620_gsw *gsw = platform_get_drvdata(pdev);
-+
-+ clk_disable_unprepare(gsw->clk_trgpll);
-+
-+ pm_runtime_put_sync(&pdev->dev);
-+ pm_runtime_disable(&pdev->dev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gsw_driver = {
-+ .probe = mt7623_gsw_probe,
-+ .remove = mt7623_gsw_remove,
-+ .driver = {
-+ .name = "mt7623-gsw",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mediatek_gsw_match,
-+ },
-+};
-+
-+module_platform_driver(gsw_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7623 SoC");
-diff --git a/drivers/net/ethernet/mediatek/mt7530.c b/drivers/net/ethernet/mediatek/mt7530.c
-new file mode 100644
-index 0000000..2e9d280
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mt7530.c
-@@ -0,0 +1,808 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/if.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/if_ether.h>
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
-+#include <linux/netlink.h>
-+#include <linux/bitops.h>
-+#include <net/genetlink.h>
-+#include <linux/switch.h>
-+#include <linux/delay.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/lockdep.h>
-+#include <linux/workqueue.h>
-+#include <linux/of_device.h>
-+
-+#include "mt7530.h"
-+
-+#define MT7530_CPU_PORT 6
-+#define MT7530_NUM_PORTS 8
-+#define MT7530_NUM_VLANS 16
-+#define MT7530_MAX_VID 4095
-+#define MT7530_MIN_VID 0
-+
-+/* registers */
-+#define REG_ESW_VLAN_VTCR 0x90
-+#define REG_ESW_VLAN_VAWD1 0x94
-+#define REG_ESW_VLAN_VAWD2 0x98
-+#define REG_ESW_VLAN_VTIM(x) (0x100 + 4 * ((x) / 2))
-+
-+#define REG_ESW_VLAN_VAWD1_IVL_MAC BIT(30)
-+#define REG_ESW_VLAN_VAWD1_VTAG_EN BIT(28)
-+#define REG_ESW_VLAN_VAWD1_VALID BIT(0)
-+
-+/* vlan egress mode */
-+enum {
-+ ETAG_CTRL_UNTAG = 0,
-+ ETAG_CTRL_TAG = 2,
-+ ETAG_CTRL_SWAP = 1,
-+ ETAG_CTRL_STACK = 3,
-+};
-+
-+#define REG_ESW_PORT_PCR(x) (0x2004 | ((x) << 8))
-+#define REG_ESW_PORT_PVC(x) (0x2010 | ((x) << 8))
-+#define REG_ESW_PORT_PPBV1(x) (0x2014 | ((x) << 8))
-+
-+#define REG_HWTRAP 0x7804
-+
-+#define MIB_DESC(_s , _o, _n) \
-+ { \
-+ .size = (_s), \
-+ .offset = (_o), \
-+ .name = (_n), \
-+ }
-+
-+struct mt7xxx_mib_desc {
-+ unsigned int size;
-+ unsigned int offset;
-+ const char *name;
-+};
-+
-+#define MT7621_MIB_COUNTER_BASE 0x4000
-+#define MT7621_MIB_COUNTER_PORT_OFFSET 0x100
-+#define MT7621_STATS_TDPC 0x00
-+#define MT7621_STATS_TCRC 0x04
-+#define MT7621_STATS_TUPC 0x08
-+#define MT7621_STATS_TMPC 0x0C
-+#define MT7621_STATS_TBPC 0x10
-+#define MT7621_STATS_TCEC 0x14
-+#define MT7621_STATS_TSCEC 0x18
-+#define MT7621_STATS_TMCEC 0x1C
-+#define MT7621_STATS_TDEC 0x20
-+#define MT7621_STATS_TLCEC 0x24
-+#define MT7621_STATS_TXCEC 0x28
-+#define MT7621_STATS_TPPC 0x2C
-+#define MT7621_STATS_TL64PC 0x30
-+#define MT7621_STATS_TL65PC 0x34
-+#define MT7621_STATS_TL128PC 0x38
-+#define MT7621_STATS_TL256PC 0x3C
-+#define MT7621_STATS_TL512PC 0x40
-+#define MT7621_STATS_TL1024PC 0x44
-+#define MT7621_STATS_TOC 0x48
-+#define MT7621_STATS_RDPC 0x60
-+#define MT7621_STATS_RFPC 0x64
-+#define MT7621_STATS_RUPC 0x68
-+#define MT7621_STATS_RMPC 0x6C
-+#define MT7621_STATS_RBPC 0x70
-+#define MT7621_STATS_RAEPC 0x74
-+#define MT7621_STATS_RCEPC 0x78
-+#define MT7621_STATS_RUSPC 0x7C
-+#define MT7621_STATS_RFEPC 0x80
-+#define MT7621_STATS_ROSPC 0x84
-+#define MT7621_STATS_RJEPC 0x88
-+#define MT7621_STATS_RPPC 0x8C
-+#define MT7621_STATS_RL64PC 0x90
-+#define MT7621_STATS_RL65PC 0x94
-+#define MT7621_STATS_RL128PC 0x98
-+#define MT7621_STATS_RL256PC 0x9C
-+#define MT7621_STATS_RL512PC 0xA0
-+#define MT7621_STATS_RL1024PC 0xA4
-+#define MT7621_STATS_ROC 0xA8
-+#define MT7621_STATS_RDPC_CTRL 0xB0
-+#define MT7621_STATS_RDPC_ING 0xB4
-+#define MT7621_STATS_RDPC_ARL 0xB8
-+
-+static const struct mt7xxx_mib_desc mt7621_mibs[] = {
-+ MIB_DESC(1, MT7621_STATS_TDPC, "TxDrop"),
-+ MIB_DESC(1, MT7621_STATS_TCRC, "TxCRC"),
-+ MIB_DESC(1, MT7621_STATS_TUPC, "TxUni"),
-+ MIB_DESC(1, MT7621_STATS_TMPC, "TxMulti"),
-+ MIB_DESC(1, MT7621_STATS_TBPC, "TxBroad"),
-+ MIB_DESC(1, MT7621_STATS_TCEC, "TxCollision"),
-+ MIB_DESC(1, MT7621_STATS_TSCEC, "TxSingleCol"),
-+ MIB_DESC(1, MT7621_STATS_TMCEC, "TxMultiCol"),
-+ MIB_DESC(1, MT7621_STATS_TDEC, "TxDefer"),
-+ MIB_DESC(1, MT7621_STATS_TLCEC, "TxLateCol"),
-+ MIB_DESC(1, MT7621_STATS_TXCEC, "TxExcCol"),
-+ MIB_DESC(1, MT7621_STATS_TPPC, "TxPause"),
-+ MIB_DESC(1, MT7621_STATS_TL64PC, "Tx64Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL65PC, "Tx65Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL128PC, "Tx128Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL256PC, "Tx256Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL512PC, "Tx512Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL1024PC, "Tx1024Byte"),
-+ MIB_DESC(2, MT7621_STATS_TOC, "TxByte"),
-+ MIB_DESC(1, MT7621_STATS_RDPC, "RxDrop"),
-+ MIB_DESC(1, MT7621_STATS_RFPC, "RxFiltered"),
-+ MIB_DESC(1, MT7621_STATS_RUPC, "RxUni"),
-+ MIB_DESC(1, MT7621_STATS_RMPC, "RxMulti"),
-+ MIB_DESC(1, MT7621_STATS_RBPC, "RxBroad"),
-+ MIB_DESC(1, MT7621_STATS_RAEPC, "RxAlignErr"),
-+ MIB_DESC(1, MT7621_STATS_RCEPC, "RxCRC"),
-+ MIB_DESC(1, MT7621_STATS_RUSPC, "RxUnderSize"),
-+ MIB_DESC(1, MT7621_STATS_RFEPC, "RxFragment"),
-+ MIB_DESC(1, MT7621_STATS_ROSPC, "RxOverSize"),
-+ MIB_DESC(1, MT7621_STATS_RJEPC, "RxJabber"),
-+ MIB_DESC(1, MT7621_STATS_RPPC, "RxPause"),
-+ MIB_DESC(1, MT7621_STATS_RL64PC, "Rx64Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL65PC, "Rx65Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL128PC, "Rx128Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL256PC, "Rx256Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL512PC, "Rx512Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL1024PC, "Rx1024Byte"),
-+ MIB_DESC(2, MT7621_STATS_ROC, "RxByte"),
-+ MIB_DESC(1, MT7621_STATS_RDPC_CTRL, "RxCtrlDrop"),
-+ MIB_DESC(1, MT7621_STATS_RDPC_ING, "RxIngDrop"),
-+ MIB_DESC(1, MT7621_STATS_RDPC_ARL, "RxARLDrop")
-+};
-+
-+enum {
-+ /* Global attributes. */
-+ MT7530_ATTR_ENABLE_VLAN,
-+};
-+
-+struct mt7530_port_entry {
-+ u16 pvid;
-+};
-+
-+struct mt7530_vlan_entry {
-+ u16 vid;
-+ u8 member;
-+ u8 etags;
-+};
-+
-+struct mt7530_priv {
-+ void __iomem *base;
-+ struct mii_bus *bus;
-+ struct switch_dev swdev;
-+
-+ bool global_vlan_enable;
-+ struct mt7530_vlan_entry vlan_entries[MT7530_NUM_VLANS];
-+ struct mt7530_port_entry port_entries[MT7530_NUM_PORTS];
-+};
-+
-+struct mt7530_mapping {
-+ char *name;
-+ u16 pvids[MT7530_NUM_PORTS];
-+ u8 members[MT7530_NUM_VLANS];
-+ u8 etags[MT7530_NUM_VLANS];
-+ u16 vids[MT7530_NUM_VLANS];
-+} mt7530_defaults[] = {
-+ {
-+ .name = "llllw",
-+ .pvids = { 1, 1, 1, 1, 2, 1, 1 },
-+ .members = { 0, 0x6f, 0x50 },
-+ .etags = { 0, 0x40, 0x40 },
-+ .vids = { 0, 1, 2 },
-+ }, {
-+ .name = "wllll",
-+ .pvids = { 2, 1, 1, 1, 1, 1, 1 },
-+ .members = { 0, 0x7e, 0x41 },
-+ .etags = { 0, 0x40, 0x40 },
-+ .vids = { 0, 1, 2 },
-+ },
-+};
-+
-+struct mt7530_mapping*
-+mt7530_find_mapping(struct device_node *np)
-+{
-+ const char *map;
-+ int i;
-+
-+ if (of_property_read_string(np, "mediatek,portmap", &map))
-+ return NULL;
-+
-+ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++)
-+ if (!strcmp(map, mt7530_defaults[i].name))
-+ return &mt7530_defaults[i];
-+
-+ return NULL;
-+}
-+
-+static void
-+mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map)
-+{
-+ int i = 0;
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530->port_entries[i].pvid = map->pvids[i];
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ mt7530->vlan_entries[i].member = map->members[i];
-+ mt7530->vlan_entries[i].etags = map->etags[i];
-+ mt7530->vlan_entries[i].vid = map->vids[i];
-+ }
-+}
-+
-+static int
-+mt7530_reset_switch(struct switch_dev *dev)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ int i;
-+
-+ memset(eth->port_entries, 0, sizeof(eth->port_entries));
-+ memset(eth->vlan_entries, 0, sizeof(eth->vlan_entries));
-+
-+ /* set default vid of each vlan to the same number of vlan, so the vid
-+ * won't need be set explicitly.
-+ */
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ eth->vlan_entries[i].vid = i;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+
-+ val->value.i = eth->global_vlan_enable;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+
-+ eth->global_vlan_enable = val->value.i != 0;
-+
-+ return 0;
-+}
-+
-+static u32
-+mt7530_r32(struct mt7530_priv *eth, u32 reg)
-+{
-+ u32 val;
-+ if (eth->bus) {
-+ u16 high, low;
-+
-+ mdiobus_write(eth->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ low = mdiobus_read(eth->bus, 0x1f, (reg >> 2) & 0xf);
-+ high = mdiobus_read(eth->bus, 0x1f, 0x10);
-+
-+ return (high << 16) | (low & 0xffff);
-+ }
-+
-+ val = ioread32(eth->base + reg);
-+ pr_debug("MT7530 MDIO Read [%04x]=%08x\n", reg, val);
-+
-+ return val;
-+}
-+
-+static void
-+mt7530_w32(struct mt7530_priv *eth, u32 reg, u32 val)
-+{
-+ if (eth->bus) {
-+ mdiobus_write(eth->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ mdiobus_write(eth->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
-+ mdiobus_write(eth->bus, 0x1f, 0x10, val >> 16);
-+ return;
-+ }
-+
-+ pr_debug("MT7530 MDIO Write[%04x]=%08x\n", reg, val);
-+ iowrite32(val, eth->base + reg);
-+}
-+
-+static void
-+mt7530_vtcr(struct mt7530_priv *eth, u32 cmd, u32 val)
-+{
-+ int i;
-+
-+ mt7530_w32(eth, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val);
-+
-+ for (i = 0; i < 20; i++) {
-+ u32 val = mt7530_r32(eth, REG_ESW_VLAN_VTCR);
-+
-+ if ((val & BIT(31)) == 0)
-+ break;
-+
-+ udelay(1000);
-+ }
-+ if (i == 20)
-+ printk("mt7530: vtcr timeout\n");
-+}
-+
-+static int
-+mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+
-+ if (port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ *val = mt7530_r32(eth, REG_ESW_PORT_PPBV1(port));
-+ *val &= 0xfff;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+
-+ if (port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ if (pvid < MT7530_MIN_VID || pvid > MT7530_MAX_VID)
-+ return -EINVAL;
-+
-+ eth->port_entries[port].pvid = pvid;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ u32 member;
-+ u32 etags;
-+ int i;
-+
-+ val->len = 0;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS)
-+ return -EINVAL;
-+
-+ mt7530_vtcr(eth, 0, val->port_vlan);
-+
-+ member = mt7530_r32(eth, REG_ESW_VLAN_VAWD1);
-+ member >>= 16;
-+ member &= 0xff;
-+
-+ etags = mt7530_r32(eth, REG_ESW_VLAN_VAWD2);
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ struct switch_port *p;
-+ int etag;
-+
-+ if (!(member & BIT(i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+
-+ etag = (etags >> (i * 2)) & 0x3;
-+
-+ if (etag == ETAG_CTRL_TAG)
-+ p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED);
-+ else if (etag != ETAG_CTRL_UNTAG)
-+ printk("vlan egress tag control neither untag nor tag.\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ u8 member = 0;
-+ u8 etags = 0;
-+ int i;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS ||
-+ val->len > MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ for (i = 0; i < val->len; i++) {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ if (p->id >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ member |= BIT(p->id);
-+
-+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED))
-+ etags |= BIT(p->id);
-+ }
-+ eth->vlan_entries[val->port_vlan].member = member;
-+ eth->vlan_entries[val->port_vlan].etags = etags;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ int vlan;
-+ u16 vid;
-+
-+ vlan = val->port_vlan;
-+ vid = (u16)val->value.i;
-+
-+ if (vlan < 0 || vlan >= MT7530_NUM_VLANS)
-+ return -EINVAL;
-+
-+ if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID)
-+ return -EINVAL;
-+
-+ eth->vlan_entries[vlan].vid = vid;
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ u32 vid;
-+ int vlan;
-+
-+ vlan = val->port_vlan;
-+
-+ vid = mt7530_r32(eth, REG_ESW_VLAN_VTIM(vlan));
-+ if (vlan & 1)
-+ vid = vid >> 12;
-+ vid &= 0xfff;
-+
-+ val->value.i = vid;
-+ return 0;
-+}
-+
-+static int
-+mt7530_apply_config(struct switch_dev *dev)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ int i, j;
-+ u8 tag_ports;
-+ u8 untag_ports;
-+
-+ if (!eth->global_vlan_enable) {
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(eth, REG_ESW_PORT_PCR(i), 0x00ff0000);
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(eth, REG_ESW_PORT_PVC(i), 0x810000c0);
-+
-+ return 0;
-+ }
-+
-+ /* set all ports as security mode */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(eth, REG_ESW_PORT_PCR(i), 0x00ff0003);
-+
-+ /* check if a port is used in tag/untag vlan egress mode */
-+ tag_ports = 0;
-+ untag_ports = 0;
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ u8 member = eth->vlan_entries[i].member;
-+ u8 etags = eth->vlan_entries[i].etags;
-+
-+ if (!member)
-+ continue;
-+
-+ for (j = 0; j < MT7530_NUM_PORTS; j++) {
-+ if (!(member & BIT(j)))
-+ continue;
-+
-+ if (etags & BIT(j))
-+ tag_ports |= 1u << j;
-+ else
-+ untag_ports |= 1u << j;
-+ }
-+ }
-+
-+ /* set all untag-only ports as transparent and the rest as user port */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ u32 pvc_mode = 0x81000000;
-+
-+ if (untag_ports & BIT(i) && !(tag_ports & BIT(i)))
-+ pvc_mode = 0x810000c0;
-+
-+ mt7530_w32(eth, REG_ESW_PORT_PVC(i), pvc_mode);
-+ }
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ u16 vid = eth->vlan_entries[i].vid;
-+ u8 member = eth->vlan_entries[i].member;
-+ u8 etags = eth->vlan_entries[i].etags;
-+ u32 val;
-+
-+ /* vid of vlan */
-+ val = mt7530_r32(eth, REG_ESW_VLAN_VTIM(i));
-+ if (i % 2 == 0) {
-+ val &= 0xfff000;
-+ val |= vid;
-+ } else {
-+ val &= 0xfff;
-+ val |= (vid << 12);
-+ }
-+ mt7530_w32(eth, REG_ESW_VLAN_VTIM(i), val);
-+
-+ /* vlan port membership */
-+ if (member)
-+ mt7530_w32(eth, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
-+ REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
-+ REG_ESW_VLAN_VAWD1_VALID);
-+ else
-+ mt7530_w32(eth, REG_ESW_VLAN_VAWD1, 0);
-+
-+ /* egress mode */
-+ val = 0;
-+ for (j = 0; j < MT7530_NUM_PORTS; j++) {
-+ if (etags & BIT(j))
-+ val |= ETAG_CTRL_TAG << (j * 2);
-+ else
-+ val |= ETAG_CTRL_UNTAG << (j * 2);
-+ }
-+ mt7530_w32(eth, REG_ESW_VLAN_VAWD2, val);
-+
-+ /* write to vlan table */
-+ mt7530_vtcr(eth, 1, i);
-+ }
-+
-+ /* Port Default PVID */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ u32 val;
-+ val = mt7530_r32(eth, REG_ESW_PORT_PPBV1(i));
-+ val &= ~0xfff;
-+ val |= eth->port_entries[i].pvid;
-+ mt7530_w32(eth, REG_ESW_PORT_PPBV1(i), val);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_port_link(struct switch_dev *dev, int port,
-+ struct switch_port_link *link)
-+{
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ u32 speed, pmsr;
-+
-+ if (port < 0 || port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ pmsr = mt7530_r32(eth, 0x3008 + (0x100 * port));
-+
-+ link->link = pmsr & 1;
-+ link->duplex = (pmsr >> 1) & 1;
-+ speed = (pmsr >> 2) & 3;
-+
-+ switch (speed) {
-+ case 0:
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ break;
-+ case 1:
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ break;
-+ case 2:
-+ case 3: /* forced gige speed can be 2 or 3 */
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+ break;
-+ default:
-+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct switch_attr mt7530_global[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_vlan",
-+ .description = "VLAN mode (1:enabled)",
-+ .max = 1,
-+ .id = MT7530_ATTR_ENABLE_VLAN,
-+ .get = mt7530_get_vlan_enable,
-+ .set = mt7530_set_vlan_enable,
-+ },
-+};
-+
-+static u64 get_mib_counter(struct mt7530_priv *eth, int i, int port)
-+{
-+ unsigned int port_base;
-+ u64 t;
-+
-+ port_base = MT7621_MIB_COUNTER_BASE +
-+ MT7621_MIB_COUNTER_PORT_OFFSET * port;
-+
-+ t = mt7530_r32(eth, port_base + mt7621_mibs[i].offset);
-+ if (mt7621_mibs[i].size == 2) {
-+ u64 hi;
-+
-+ hi = mt7530_r32(eth, port_base + mt7621_mibs[i].offset + 4);
-+ t |= hi << 32;
-+ }
-+
-+ return t;
-+}
-+
-+static int mt7621_sw_get_port_mib(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ static char buf[4096];
-+ struct mt7530_priv *eth = container_of(dev, struct mt7530_priv, swdev);
-+ int i, len = 0;
-+
-+ if (val->port_vlan >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ len += snprintf(buf + len, sizeof(buf) - len,
-+ "Port %d MIB counters\n", val->port_vlan);
-+
-+ for (i = 0; i < sizeof(mt7621_mibs) / sizeof(*mt7621_mibs); ++i) {
-+ u64 counter;
-+ len += snprintf(buf + len, sizeof(buf) - len,
-+ "%-11s: ", mt7621_mibs[i].name);
-+ counter = get_mib_counter(eth, i, val->port_vlan);
-+ len += snprintf(buf + len, sizeof(buf) - len, "%llu\n",
-+ counter);
-+ }
-+
-+ val->value.s = buf;
-+ val->len = len;
-+ return 0;
-+}
-+
-+static const struct switch_attr mt7621_port[] = {
-+ {
-+ .type = SWITCH_TYPE_STRING,
-+ .name = "mib",
-+ .description = "Get MIB counters for port",
-+ .get = mt7621_sw_get_port_mib,
-+ .set = NULL,
-+ },
-+};
-+
-+static const struct switch_attr mt7530_port[] = {
-+};
-+
-+static const struct switch_attr mt7530_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = mt7530_set_vid,
-+ .get = mt7530_get_vid,
-+ .max = 4094,
-+ },
-+};
-+
-+static const struct switch_dev_ops mt7621_ops = {
-+ .attr_global = {
-+ .attr = mt7530_global,
-+ .n_attr = ARRAY_SIZE(mt7530_global),
-+ },
-+/* .attr_port = {
-+ .attr = mt7621_port,
-+ .n_attr = ARRAY_SIZE(mt7621_port),
-+ },*/
-+ .attr_vlan = {
-+ .attr = mt7530_vlan,
-+ .n_attr = ARRAY_SIZE(mt7530_vlan),
-+ },
-+ .get_vlan_ports = mt7530_get_vlan_ports,
-+ .set_vlan_ports = mt7530_set_vlan_ports,
-+ .get_port_pvid = mt7530_get_port_pvid,
-+ .set_port_pvid = mt7530_set_port_pvid,
-+ .get_port_link = mt7530_get_port_link,
-+ .apply_config = mt7530_apply_config,
-+ .reset_switch = mt7530_reset_switch,
-+};
-+
-+static const struct switch_dev_ops mt7530_ops = {
-+ .attr_global = {
-+ .attr = mt7530_global,
-+ .n_attr = ARRAY_SIZE(mt7530_global),
-+ },
-+ .attr_port = {
-+ .attr = mt7530_port,
-+ .n_attr = ARRAY_SIZE(mt7530_port),
-+ },
-+ .attr_vlan = {
-+ .attr = mt7530_vlan,
-+ .n_attr = ARRAY_SIZE(mt7530_vlan),
-+ },
-+ .get_vlan_ports = mt7530_get_vlan_ports,
-+ .set_vlan_ports = mt7530_set_vlan_ports,
-+ .get_port_pvid = mt7530_get_port_pvid,
-+ .set_port_pvid = mt7530_set_port_pvid,
-+ .get_port_link = mt7530_get_port_link,
-+ .apply_config = mt7530_apply_config,
-+ .reset_switch = mt7530_reset_switch,
-+};
-+
-+int
-+mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan)
-+{
-+ struct switch_dev *swdev;
-+ struct mt7530_priv *mt7530;
-+ struct mt7530_mapping *map;
-+ int ret;
-+
-+ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL);
-+ if (!mt7530)
-+ return -ENOMEM;
-+
-+ mt7530->base = base;
-+ mt7530->bus = bus;
-+ mt7530->global_vlan_enable = vlan;
-+
-+ swdev = &mt7530->swdev;
-+ if (bus) {
-+ swdev->alias = "mt7530";
-+ swdev->name = "mt7530";
-+ } else if (IS_ENABLED(CONFIG_MACH_MT7623)) {
-+ swdev->alias = "mt7623";
-+ swdev->name = "mt7623";
-+ } else if (IS_ENABLED(CONFIG_SOC_MT7621)) {
-+ swdev->alias = "mt7621";
-+ swdev->name = "mt7621";
-+ } else {
-+ swdev->alias = "mt7620";
-+ swdev->name = "mt7620";
-+ }
-+ swdev->cpu_port = MT7530_CPU_PORT;
-+ swdev->ports = MT7530_NUM_PORTS;
-+ swdev->vlans = MT7530_NUM_VLANS;
-+ if (IS_ENABLED(CONFIG_SOC_MT7621) || IS_ENABLED(CONFIG_MACH_MT7623))
-+ swdev->ops = &mt7621_ops;
-+ else
-+ swdev->ops = &mt7530_ops;
-+
-+ ret = register_switch(swdev, NULL);
-+ if (ret) {
-+ dev_err(dev, "failed to register mt7530\n");
-+ return ret;
-+ }
-+
-+ mt7530_reset_switch(swdev);
-+
-+ map = mt7530_find_mapping(dev->of_node);
-+ if (map)
-+ mt7530_apply_mapping(mt7530, map);
-+ mt7530_apply_config(swdev);
-+
-+ /* magic vodoo */
-+ if (!(IS_ENABLED(CONFIG_SOC_MT7621) || IS_ENABLED(CONFIG_MACH_MT7623)) && bus && mt7530_r32(mt7530, REG_HWTRAP) != 0x1117edf) {
-+ dev_info(dev, "fixing up MHWTRAP register - bootloader probably played with it\n");
-+ mt7530_w32(mt7530, REG_HWTRAP, 0x1117edf);
-+ }
-+ dev_info(dev, "loaded %s driver\n", swdev->name);
-+
-+ return 0;
-+}
-diff --git a/drivers/net/ethernet/mediatek/mt7530.h b/drivers/net/ethernet/mediatek/mt7530.h
-new file mode 100644
-index 0000000..1fc8c62
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mt7530.h
-@@ -0,0 +1,20 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _MT7530_H__
-+#define _MT7530_H__
-+
-+int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan);
-+
-+#endif
-diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-index 2097ae1..ca7e961 100644
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -24,6 +24,9 @@
-
- #include "mtk_eth_soc.h"
-
-+/* the callback used by the driver core to bringup the switch */
-+int mtk_gsw_init(struct mtk_eth *eth);
-+
- static int mtk_msg_level = -1;
- module_param_named(msg_level, mtk_msg_level, int, 0);
- MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
-@@ -69,7 +72,7 @@ static int mtk_mdio_busy_wait(struct mtk_eth *eth)
- return 0;
- if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT))
- break;
-- usleep_range(10, 20);
-+// usleep_range(10, 20);
- }
-
- dev_err(eth->dev, "mdio: MDIO timeout\n");
-@@ -132,36 +135,8 @@ static int mtk_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-
- static void mtk_phy_link_adjust(struct net_device *dev)
- {
-- struct mtk_mac *mac = netdev_priv(dev);
-- u32 mcr = MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG |
-- MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN |
-- MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN |
-- MAC_MCR_BACKPR_EN;
--
-- switch (mac->phy_dev->speed) {
-- case SPEED_1000:
-- mcr |= MAC_MCR_SPEED_1000;
-- break;
-- case SPEED_100:
-- mcr |= MAC_MCR_SPEED_100;
-- break;
-- };
--
-- if (mac->phy_dev->link)
-- mcr |= MAC_MCR_FORCE_LINK;
--
-- if (mac->phy_dev->duplex)
-- mcr |= MAC_MCR_FORCE_DPX;
--
-- if (mac->phy_dev->pause)
-- mcr |= MAC_MCR_FORCE_RX_FC | MAC_MCR_FORCE_TX_FC;
--
-- mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
--
-- if (mac->phy_dev->link)
-- netif_carrier_on(dev);
-- else
-- netif_carrier_off(dev);
-+ netif_carrier_on(dev);
-+ return;
- }
-
- static int mtk_phy_connect_node(struct mtk_eth *eth, struct mtk_mac *mac,
-@@ -193,7 +168,7 @@ static int mtk_phy_connect_node(struct mtk_eth *eth, struct mtk_mac *mac,
-
- dev_info(eth->dev,
- "connected mac %d to PHY at %s [uid=%08x, driver=%s]\n",
-- mac->id, phydev_name(phydev), phydev->phy_id,
-+ mac->id, dev_name(&phydev->dev), phydev->phy_id,
- phydev->drv->name);
-
- mac->phy_dev = phydev;
-@@ -209,7 +184,7 @@ static int mtk_phy_connect(struct mtk_mac *mac)
-
- np = of_parse_phandle(mac->of_node, "phy-handle", 0);
- if (!np)
-- return -ENODEV;
-+ return 0;
-
- switch (of_get_phy_mode(np)) {
- case PHY_INTERFACE_MODE_RGMII:
-@@ -239,7 +214,8 @@ static int mtk_phy_connect(struct mtk_mac *mac)
- mac->phy_dev->supported &= PHY_BASIC_FEATURES;
- mac->phy_dev->advertising = mac->phy_dev->supported |
- ADVERTISED_Autoneg;
-- phy_start_aneg(mac->phy_dev);
-+ if (mac->phy_dev)
-+ phy_start_aneg(mac->phy_dev);
-
- return 0;
- }
-@@ -626,7 +602,6 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
- WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) |
- (!nr_frags * TX_DMA_LS0)));
-
-- netdev_sent_queue(dev, skb->len);
- skb_tx_timestamp(skb);
-
- ring->next_free = mtk_qdma_phys_to_virt(ring, txd->txd2);
-@@ -906,7 +881,6 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget)
- for (i = 0; i < MTK_MAC_COUNT; i++) {
- if (!eth->netdev[i] || !done[i])
- continue;
-- netdev_completed_queue(eth->netdev[i], done[i], bytes[i]);
- total += done[i];
- }
-
-@@ -1284,9 +1258,12 @@ static int mtk_open(struct net_device *dev)
- }
- atomic_inc(&eth->dma_refcnt);
-
-- phy_start(mac->phy_dev);
-+ if (mac->phy_dev)
-+ phy_start(mac->phy_dev);
- netif_start_queue(dev);
-
-+ netif_carrier_on(dev);
-+
- return 0;
- }
-
-@@ -1319,8 +1296,10 @@ static int mtk_stop(struct net_device *dev)
- struct mtk_mac *mac = netdev_priv(dev);
- struct mtk_eth *eth = mac->hw;
-
-+ netif_carrier_off(dev);
- netif_tx_disable(dev);
-- phy_stop(mac->phy_dev);
-+ if (mac->phy_dev)
-+ phy_stop(mac->phy_dev);
-
- /* only shutdown DMA if this is the last user */
- if (!atomic_dec_and_test(&eth->dma_refcnt))
-@@ -1346,20 +1325,11 @@ static int __init mtk_hw_init(struct mtk_eth *eth)
- reset_control_deassert(eth->rstc);
- usleep_range(10, 20);
-
-- /* Set GE2 driving and slew rate */
-- regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
--
-- /* set GE2 TDSEL */
-- regmap_write(eth->pctl, GPIO_OD33_CTRL8, 0x5);
--
-- /* set GE2 TUNE */
-- regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0);
--
- /* GE1, Force 1000M/FD, FC ON */
-- mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(0));
-+ mtk_w32(eth, 0x0105e33b, MTK_MAC_MCR(0));
-
-- /* GE2, Force 1000M/FD, FC ON */
-- mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1));
-+ /* GE2, use autopolling */
-+ mtk_w32(eth, 0x01056300, MTK_MAC_MCR(1));
-
- /* Enable RX VLan Offloading */
- mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-@@ -1377,6 +1347,8 @@ static int __init mtk_hw_init(struct mtk_eth *eth)
- if (err)
- return err;
-
-+ mtk_gsw_init(eth);
-+
- /* disable delay and normal interrupt */
- mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
- mtk_irq_disable(eth, MTK_TX_DONE_INT | MTK_RX_DONE_INT);
-@@ -1404,6 +1376,8 @@ static int __init mtk_hw_init(struct mtk_eth *eth)
- mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
- }
-
-+ mt7623_gsw_config(eth);
-+
- return 0;
- }
-
-@@ -1433,7 +1407,8 @@ static void mtk_uninit(struct net_device *dev)
- struct mtk_mac *mac = netdev_priv(dev);
- struct mtk_eth *eth = mac->hw;
-
-- phy_disconnect(mac->phy_dev);
-+ if (mac->phy_dev)
-+ phy_disconnect(mac->phy_dev);
- mtk_mdio_cleanup(eth);
- mtk_irq_disable(eth, ~0);
- free_irq(eth->irq[0], dev);
-@@ -1445,7 +1420,7 @@ static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
- struct mtk_mac *mac = netdev_priv(dev);
-
-- switch (cmd) {
-+ if (mac->phy_dev) switch (cmd) {
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
-@@ -1508,9 +1483,10 @@ static int mtk_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
- {
- struct mtk_mac *mac = netdev_priv(dev);
-- int err;
-+ int err = -1;
-
-- err = phy_read_status(mac->phy_dev);
-+ if (mac->phy_dev)
-+ err = phy_read_status(mac->phy_dev);
- if (err)
- return -ENODEV;
-
-@@ -1522,11 +1498,16 @@ static int mtk_set_settings(struct net_device *dev,
- {
- struct mtk_mac *mac = netdev_priv(dev);
-
-- if (cmd->phy_address != mac->phy_dev->mdio.addr) {
-- mac->phy_dev = mdiobus_get_phy(mac->hw->mii_bus,
-- cmd->phy_address);
-- if (!mac->phy_dev)
-+ if (!mac->phy_dev)
-+ return -ENODEV;
-+
-+ if (cmd->phy_address != mac->phy_dev->addr) {
-+ if (mac->hw->mii_bus->phy_map[cmd->phy_address]) {
-+ mac->phy_dev =
-+ mac->hw->mii_bus->phy_map[cmd->phy_address];
-+ } else {
- return -ENODEV;
-+ }
- }
-
- return phy_ethtool_sset(mac->phy_dev, cmd);
-@@ -1560,6 +1541,9 @@ static int mtk_nway_reset(struct net_device *dev)
- {
- struct mtk_mac *mac = netdev_priv(dev);
-
-+ if (!mac->phy_dev)
-+ return -ENODEV;
-+
- return genphy_restart_aneg(mac->phy_dev);
- }
-
-@@ -1568,6 +1552,9 @@ static u32 mtk_get_link(struct net_device *dev)
- struct mtk_mac *mac = netdev_priv(dev);
- int err;
-
-+ if (!mac->phy_dev)
-+ return -ENODEV;
-+
- err = genphy_update_link(mac->phy_dev);
- if (err)
- return ethtool_op_get_link(dev);
-@@ -1619,7 +1606,6 @@ static void mtk_get_ethtool_stats(struct net_device *dev,
- data_src = (u64*)hwstats;
- data_dst = data;
- start = u64_stats_fetch_begin_irq(&hwstats->syncp);
--
- for (i = 0; i < ARRAY_SIZE(mtk_ethtool_stats); i++)
- *data_dst++ = *(data_src + mtk_ethtool_stats[i].offset);
- } while (u64_stats_fetch_retry_irq(&hwstats->syncp, start));
-@@ -1789,6 +1775,9 @@ static int mtk_probe(struct platform_device *pdev)
- clk_prepare_enable(eth->clk_gp1);
- clk_prepare_enable(eth->clk_gp2);
-
-+ eth->switch_np = of_parse_phandle(pdev->dev.of_node,
-+ "mediatek,switch", 0);
-+
- eth->dev = &pdev->dev;
- eth->msg_enable = netif_msg_init(mtk_msg_level, MTK_DEFAULT_MSG_ENABLE);
- INIT_WORK(&eth->pending_work, mtk_pending_work);
-diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-index 4cfb40c..bbe0346 100644
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -401,6 +401,9 @@ struct mtk_eth {
- struct mii_bus *mii_bus;
- struct work_struct pending_work;
- struct tasklet_struct tx_clean_tasklet;
-+
-+ struct device_node *switch_np;
-+ void *sw_priv;
- };
-
- /* struct mtk_mac - the structure that holds the info about the MACs of the
-@@ -428,4 +431,6 @@ void mtk_stats_update_mac(struct mtk_mac *mac);
- void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
- u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
-
-+int mt7623_gsw_config(struct mtk_eth *eth);
-+
- #endif /* MTK_ETH_H */
---
-1.7.10.4
-
diff --git a/target/linux/mediatek/patches-4.4/0075-clk-mediatek-enable-critical-clocks.patch b/target/linux/mediatek/patches-4.4/0075-clk-mediatek-enable-critical-clocks.patch
deleted file mode 100644
index fe0c366c85..0000000000
--- a/target/linux/mediatek/patches-4.4/0075-clk-mediatek-enable-critical-clocks.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From b7a101f53b7cb0e05658e04accf9fd12512b5735 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 31 Mar 2016 06:46:51 +0200
-Subject: [PATCH 75/78] clk: mediatek: enable critical clocks
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/clk/mediatek/clk-mt2701.c | 22 ++++++++++++++++++++--
- 1 file changed, 20 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c
-index 812b347..1634288 100644
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -573,6 +573,20 @@ static const struct mtk_gate top_clks[] __initconst = {
- GATE_TOP_AUD(CLK_TOP_AUD_I2S6_MCLK, "aud_i2s6_mclk", "aud_k6_src_div", 28),
- };
-
-+static struct clk_onecell_data *mt7623_top_clk_data __initdata;
-+static struct clk_onecell_data *mt7623_pll_clk_data __initdata;
-+
-+static void __init mtk_clk_enable_critical(void)
-+{
-+ if (!mt7623_top_clk_data || !mt7623_pll_clk_data)
-+ return;
-+
-+ clk_prepare_enable(mt7623_pll_clk_data->clks[CLK_APMIXED_ARMPLL]);
-+ clk_prepare_enable(mt7623_top_clk_data->clks[CLK_TOP_MEM_SEL]);
-+ clk_prepare_enable(mt7623_top_clk_data->clks[CLK_TOP_DDRPHYCFG_SEL]);
-+ clk_prepare_enable(mt7623_top_clk_data->clks[CLK_TOP_RTC_SEL]);
-+}
-+
- static void __init mtk_topckgen_init(struct device_node *node)
- {
- struct clk_onecell_data *clk_data;
-@@ -585,7 +599,7 @@ static void __init mtk_topckgen_init(struct device_node *node)
- return;
- }
-
-- clk_data = mtk_alloc_clk_data(CLK_TOP_NR);
-+ mt7623_top_clk_data = clk_data = mtk_alloc_clk_data(CLK_TOP_NR);
-
- mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
- clk_data);
-@@ -606,6 +620,8 @@ static void __init mtk_topckgen_init(struct device_node *node)
- if (r)
- pr_err("%s(): could not register clock provider: %d\n",
- __func__, r);
-+
-+ mtk_clk_enable_critical();
- }
- CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt2701-topckgen", mtk_topckgen_init);
-
-@@ -1202,7 +1218,7 @@ static void __init mtk_apmixedsys_init(struct device_node *node)
- struct clk_onecell_data *clk_data;
- int r;
-
-- clk_data = mtk_alloc_clk_data(ARRAY_SIZE(apmixed_plls));
-+ mt7623_pll_clk_data = clk_data = mtk_alloc_clk_data(ARRAY_SIZE(apmixed_plls));
- if (!clk_data)
- return;
-
-@@ -1213,6 +1229,8 @@ static void __init mtk_apmixedsys_init(struct device_node *node)
- if (r)
- pr_err("%s(): could not register clock provider: %d\n",
- __func__, r);
-+
-+ mtk_clk_enable_critical();
- }
- CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt2701-apmixedsys",
- mtk_apmixedsys_init);
---
-1.7.10.4
-
diff --git a/target/linux/mediatek/patches-4.4/0076-clk-mediatek-Export-CPU-mux-clocks-for-CPU-frequency.patch b/target/linux/mediatek/patches-4.4/0076-clk-mediatek-Export-CPU-mux-clocks-for-CPU-frequency.patch
deleted file mode 100644
index ee3ba76e33..0000000000
--- a/target/linux/mediatek/patches-4.4/0076-clk-mediatek-Export-CPU-mux-clocks-for-CPU-frequency.patch
+++ /dev/null
@@ -1,306 +0,0 @@
-From cc94bef897241da9b978c9799defbdbabe9ff6ec Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 31 Mar 2016 02:26:37 +0200
-Subject: [PATCH 76/78] clk: mediatek: Export CPU mux clocks for CPU frequency
- control
-
-This patch adds CPU mux clocks which are used by Mediatek cpufreq driver
-for intermediate clock source switching.
-
-Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
----
- drivers/clk/mediatek/Makefile | 2 +-
- drivers/clk/mediatek/clk-cpumux.c | 127 ++++++++++++++++++++++++++++++++
- drivers/clk/mediatek/clk-cpumux.h | 22 ++++++
- drivers/clk/mediatek/clk-mt2701.c | 8 ++
- drivers/clk/mediatek/clk-mt8173.c | 23 ++++++
- include/dt-bindings/clock/mt2701-clk.h | 3 +-
- include/dt-bindings/clock/mt8173-clk.h | 4 +-
- 7 files changed, 186 insertions(+), 3 deletions(-)
- create mode 100644 drivers/clk/mediatek/clk-cpumux.c
- create mode 100644 drivers/clk/mediatek/clk-cpumux.h
-
-diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
-index 5b2b91b..76bfab6 100644
---- a/drivers/clk/mediatek/Makefile
-+++ b/drivers/clk/mediatek/Makefile
-@@ -1,4 +1,4 @@
--obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o
-+obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o
- obj-$(CONFIG_RESET_CONTROLLER) += reset.o
- obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o
- obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
-diff --git a/drivers/clk/mediatek/clk-cpumux.c b/drivers/clk/mediatek/clk-cpumux.c
-new file mode 100644
-index 0000000..91b5238
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-cpumux.c
-@@ -0,0 +1,127 @@
-+/*
-+ * Copyright (c) 2015 Linaro Ltd.
-+ * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/slab.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-cpumux.h"
-+
-+struct mtk_clk_cpumux {
-+ struct clk_hw hw;
-+ struct regmap *regmap;
-+ u32 reg;
-+ u32 mask;
-+ u8 shift;
-+};
-+
-+static inline struct mtk_clk_cpumux *to_clk_mux(struct clk_hw *_hw)
-+{
-+ return container_of(_hw, struct mtk_clk_cpumux, hw);
-+}
-+
-+static u8 clk_cpumux_get_parent(struct clk_hw *hw)
-+{
-+ struct mtk_clk_cpumux *mux = to_clk_mux(hw);
-+ int num_parents = clk_hw_get_num_parents(hw);
-+ unsigned int val;
-+
-+ regmap_read(mux->regmap, mux->reg, &val);
-+
-+ val >>= mux->shift;
-+ val &= mux->mask;
-+
-+ if (val >= num_parents)
-+ return -EINVAL;
-+
-+ return val;
-+}
-+
-+static int clk_cpumux_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct mtk_clk_cpumux *mux = to_clk_mux(hw);
-+ u32 mask, val;
-+
-+ val = index << mux->shift;
-+ mask = mux->mask << mux->shift;
-+
-+ return regmap_update_bits(mux->regmap, mux->reg, mask, val);
-+}
-+
-+static const struct clk_ops clk_cpumux_ops = {
-+ .get_parent = clk_cpumux_get_parent,
-+ .set_parent = clk_cpumux_set_parent,
-+};
-+
-+static struct clk __init *mtk_clk_register_cpumux(const struct mtk_composite *mux,
-+ struct regmap *regmap)
-+{
-+ struct mtk_clk_cpumux *cpumux;
-+ struct clk *clk;
-+ struct clk_init_data init;
-+
-+ cpumux = kzalloc(sizeof(*cpumux), GFP_KERNEL);
-+ if (!cpumux)
-+ return ERR_PTR(-ENOMEM);
-+
-+ init.name = mux->name;
-+ init.ops = &clk_cpumux_ops;
-+ init.parent_names = mux->parent_names;
-+ init.num_parents = mux->num_parents;
-+ init.flags = mux->flags;
-+
-+ cpumux->reg = mux->mux_reg;
-+ cpumux->shift = mux->mux_shift;
-+ cpumux->mask = BIT(mux->mux_width) - 1;
-+ cpumux->regmap = regmap;
-+ cpumux->hw.init = &init;
-+
-+ clk = clk_register(NULL, &cpumux->hw);
-+ if (IS_ERR(clk))
-+ kfree(cpumux);
-+
-+ return clk;
-+}
-+
-+int __init mtk_clk_register_cpumuxes(struct device_node *node,
-+ const struct mtk_composite *clks, int num,
-+ struct clk_onecell_data *clk_data)
-+{
-+ int i;
-+ struct clk *clk;
-+ struct regmap *regmap;
-+
-+ regmap = syscon_node_to_regmap(node);
-+ if (IS_ERR(regmap)) {
-+ pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
-+ PTR_ERR(regmap));
-+ return PTR_ERR(regmap);
-+ }
-+
-+ for (i = 0; i < num; i++) {
-+ const struct mtk_composite *mux = &clks[i];
-+
-+ clk = mtk_clk_register_cpumux(mux, regmap);
-+ if (IS_ERR(clk)) {
-+ pr_err("Failed to register clk %s: %ld\n",
-+ mux->name, PTR_ERR(clk));
-+ continue;
-+ }
-+
-+ clk_data->clks[mux->id] = clk;
-+ }
-+
-+ return 0;
-+}
-diff --git a/drivers/clk/mediatek/clk-cpumux.h b/drivers/clk/mediatek/clk-cpumux.h
-new file mode 100644
-index 0000000..52c769f
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-cpumux.h
-@@ -0,0 +1,22 @@
-+/*
-+ * Copyright (c) 2015 Linaro Ltd.
-+ * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __DRV_CLK_CPUMUX_H
-+#define __DRV_CLK_CPUMUX_H
-+
-+int mtk_clk_register_cpumuxes(struct device_node *node,
-+ const struct mtk_composite *clks, int num,
-+ struct clk_onecell_data *clk_data);
-+
-+#endif /* __DRV_CLK_CPUMUX_H */
-diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c
-index 1634288..5c37fcb 100644
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -18,6 +18,7 @@
-
- #include "clk-mtk.h"
- #include "clk-gate.h"
-+#include "clk-cpumux.h"
-
- #include <dt-bindings/clock/mt2701-clk.h>
-
-@@ -465,6 +466,10 @@ static const char * const cpu_parents[] __initconst = {
- "mmpll"
- };
-
-+static const struct mtk_composite cpu_muxes[] __initconst = {
-+ MUX(CLK_INFRA_CPUSEL, "infra_cpu_sel", cpu_parents, 0x0000, 2, 2),
-+};
-+
- static const struct mtk_composite top_muxes[] __initconst = {
- MUX_GATE(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
- 0x0040, 0, 3, INVALID_MUX_GATE_BIT),
-@@ -677,6 +682,9 @@ static void __init mtk_infrasys_init(struct device_node *node)
- mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
- clk_data);
-
-+ mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
-+ clk_data);
-+
- r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
- if (r)
- pr_err("%s(): could not register clock provider: %d\n",
-diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
-index 227e356..dfb109f 100644
---- a/drivers/clk/mediatek/clk-mt8173.c
-+++ b/drivers/clk/mediatek/clk-mt8173.c
-@@ -18,6 +18,7 @@
-
- #include "clk-mtk.h"
- #include "clk-gate.h"
-+#include "clk-cpumux.h"
-
- #include <dt-bindings/clock/mt8173-clk.h>
-
-@@ -526,6 +527,25 @@ static const char * const i2s3_b_ck_parents[] __initconst = {
- "apll2_div5"
- };
-
-+static const char * const ca53_parents[] __initconst = {
-+ "clk26m",
-+ "armca7pll",
-+ "mainpll",
-+ "univpll"
-+};
-+
-+static const char * const ca57_parents[] __initconst = {
-+ "clk26m",
-+ "armca15pll",
-+ "mainpll",
-+ "univpll"
-+};
-+
-+static const struct mtk_composite cpu_muxes[] __initdata = {
-+ MUX(CLK_INFRA_CA53SEL, "infra_ca53_sel", ca53_parents, 0x0000, 0, 2),
-+ MUX(CLK_INFRA_CA57SEL, "infra_ca57_sel", ca57_parents, 0x0000, 2, 2),
-+};
-+
- static const struct mtk_composite top_muxes[] __initconst = {
- /* CLK_CFG_0 */
- MUX(CLK_TOP_AXI_SEL, "axi_sel", axi_parents, 0x0040, 0, 3),
-@@ -945,6 +965,9 @@ static void __init mtk_infrasys_init(struct device_node *node)
- clk_data);
- mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
-
-+ mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
-+ clk_data);
-+
- r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
- if (r)
- pr_err("%s(): could not register clock provider: %d\n",
-diff --git a/include/dt-bindings/clock/mt2701-clk.h b/include/dt-bindings/clock/mt2701-clk.h
-index 50972d1..a6c63b8 100644
---- a/include/dt-bindings/clock/mt2701-clk.h
-+++ b/include/dt-bindings/clock/mt2701-clk.h
-@@ -217,7 +217,8 @@
- #define CLK_INFRA_PMICWRAP 17
- #define CLK_INFRA_DDCCI 18
- #define CLK_INFRA_CLK_13M 19
--#define CLK_INFRA_NR 20
-+#define CLK_INFRA_CPUSEL 20
-+#define CLK_INFRA_NR 21
-
- /* PERICFG */
-
-diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
-index 7956ba1..c82ed7c 100644
---- a/include/dt-bindings/clock/mt8173-clk.h
-+++ b/include/dt-bindings/clock/mt8173-clk.h
-@@ -192,7 +192,9 @@
- #define CLK_INFRA_PMICSPI 10
- #define CLK_INFRA_PMICWRAP 11
- #define CLK_INFRA_CLK_13M 12
--#define CLK_INFRA_NR_CLK 13
-+#define CLK_INFRA_CA53SEL 13
-+#define CLK_INFRA_CA57SEL 14
-+#define CLK_INFRA_NR_CLK 15
-
- /* PERI_SYS */
-
---
-1.7.10.4
-
diff --git a/target/linux/mediatek/patches-4.4/0077-cpufreq-mediatek-add-driver.patch b/target/linux/mediatek/patches-4.4/0077-cpufreq-mediatek-add-driver.patch
deleted file mode 100644
index 4d8ed58334..0000000000
--- a/target/linux/mediatek/patches-4.4/0077-cpufreq-mediatek-add-driver.patch
+++ /dev/null
@@ -1,727 +0,0 @@
-From d1421147c328a7d06d9a6b8330c73e45139b1e48 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Mar 2016 23:48:53 +0200
-Subject: [PATCH 77/78] cpufreq: mediatek: add driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/boot/dts/mt7623-evb.dts | 160 ++++++++++++----
- arch/arm/boot/dts/mt7623.dtsi | 50 ++++-
- drivers/cpufreq/Kconfig.arm | 9 +
- drivers/cpufreq/Makefile | 1 +
- drivers/cpufreq/mt7623-cpufreq.c | 389 ++++++++++++++++++++++++++++++++++++++
- 5 files changed, 570 insertions(+), 39 deletions(-)
- create mode 100644 drivers/cpufreq/mt7623-cpufreq.c
-
-diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
-index bc2b3f1..4a433f0 100644
---- a/arch/arm/boot/dts/mt7623-evb.dts
-+++ b/arch/arm/boot/dts/mt7623-evb.dts
-@@ -39,6 +39,22 @@
- };
- };
-
-+&cpu0 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+};
-+
-+&cpu1 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+};
-+
-+&cpu2 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+};
-+
-+&cpu3 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+};
-+
- &pwrap {
- pmic: mt6323 {
- compatible = "mediatek,mt6323";
-@@ -267,38 +283,36 @@
- };
- };
-
--&uart2 {
-- status = "okay";
--};
-+&pio {
-+ nand_pins_default: nanddefault {
-+ pins_dat {
-+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
-+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
-+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
-+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
-+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
-+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
-+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
-+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
-+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
-+ input-enable;
-+ drive-strength = <MTK_DRIVE_8mA>;
-+ bias-pull-up;
-+ };
-
--&mmc0 {
-- status = "okay";
-- pinctrl-names = "default", "state_uhs";
-- pinctrl-0 = <&mmc0_pins_default>;
-- pinctrl-1 = <&mmc0_pins_uhs>;
-- bus-width = <8>;
-- max-frequency = <50000000>;
-- cap-mmc-highspeed;
-- vmmc-supply = <&mt6323_vemc3v3_reg>;
-- vqmmc-supply = <&mt6323_vio18_reg>;
-- non-removable;
--};
-+ pins_we {
-+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
-+ drive-strength = <MTK_DRIVE_8mA>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
-+ };
-
--&mmc1 {
-- status = "okay";
-- pinctrl-names = "default", "state_uhs";
-- pinctrl-0 = <&mmc1_pins_default>;
-- pinctrl-1 = <&mmc1_pins_uhs>;
-- bus-width = <4>;
-- max-frequency = <50000000>;
-- cap-sd-highspeed;
-- sd-uhs-sdr25;
--// cd-gpios = <&pio 132 0>;
-- vmmc-supply = <&mt6323_vmch_reg>;
-- vqmmc-supply = <&mt6323_vmc_reg>;
--};
-+ pins_ale {
-+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
-+ drive-strength = <MTK_DRIVE_8mA>;
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-+ };
-+ };
-
--&pio {
- mmc0_pins_default: mmc0default {
- pins_cmd_dat {
- pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
-@@ -370,11 +384,6 @@
- bias-pull-down;
- drive-strength = <MTK_DRIVE_4mA>;
- };
--
--// pins_insert {
--// pinmux = <MT8173_PIN_132_I2S0_DATA1_FUNC_GPIO132>;
--// bias-pull-up;
--// };
- };
-
- mmc1_pins_uhs: mmc1 {
-@@ -422,6 +431,36 @@
- };
- };
-
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ status = "okay";
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&mmc0_pins_default>;
-+ pinctrl-1 = <&mmc0_pins_uhs>;
-+ bus-width = <8>;
-+ max-frequency = <50000000>;
-+ cap-mmc-highspeed;
-+ vmmc-supply = <&mt6323_vemc3v3_reg>;
-+ vqmmc-supply = <&mt6323_vio18_reg>;
-+ non-removable;
-+};
-+
-+&mmc1 {
-+ status = "okay";
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&mmc1_pins_default>;
-+ pinctrl-1 = <&mmc1_pins_uhs>;
-+ bus-width = <4>;
-+ max-frequency = <50000000>;
-+ cap-sd-highspeed;
-+ sd-uhs-sdr25;
-+ vmmc-supply = <&mt6323_vmch_reg>;
-+ vqmmc-supply = <&mt6323_vmc_reg>;
-+};
-+
- &usb1 {
- vusb33-supply = <&mt6323_vusb_reg>;
- vbus-supply = <&usb_p1_vbus>;
-@@ -456,3 +495,56 @@
- mediatek,reset-pin = <&pio 15 0>;
- status = "okay";
- };
-+
-+&nand {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&nand_pins_default>;
-+
-+ partition@0 {
-+ label = "preloader";
-+ reg = <0x0 0x40000>;
-+ read-only;
-+ };
-+
-+ partition@1 {
-+ label = "u-boot";
-+ reg = <0x40000 0x80000>;
-+ read-only;
-+ };
-+
-+ partition@2 {
-+ label = "u-boot-env";
-+ reg = <0xc0000 0x40000>;
-+ read-only;
-+ };
-+
-+ partition@3 {
-+ label = "factory";
-+ reg = <0x100000 0x40000>;
-+ read-only;
-+ };
-+
-+ partition@4 {
-+ label = "kernel";
-+ reg = <0x140000 0x2000000>;
-+ };
-+
-+ partition@4 {
-+ label = "kernel2";
-+ reg = <0x2140000 0x2000000>;
-+ };
-+
-+ partition@5 {
-+ label = "rootfs";
-+ reg = <0x4140000 0x1000000>;
-+ };
-+
-+ partition@6 {
-+ label = "usrdata";
-+ reg = <0x5140000 0x9f80000>;
-+ };
-+};
-diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
-index f405ec7..76d603a 100644
---- a/arch/arm/boot/dts/mt7623.dtsi
-+++ b/arch/arm/boot/dts/mt7623.dtsi
-@@ -31,25 +31,65 @@
- #size-cells = <0>;
- enable-method = "mediatek,mt6589-smp";
-
-- cpu@0 {
-+ cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
-+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
-+ <&apmixedsys CLK_APMIXED_MAINPLL>;
-+ clock-names = "cpu", "intermediate";
-+ operating-points = <
-+ 598000 1150000
-+ 747500 1150000
-+ 1040000 1150000
-+ 1196000 1200000
-+ 1300000 1300000
-+ >;
- };
-- cpu@1 {
-+ cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
-+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
-+ <&apmixedsys CLK_APMIXED_MAINPLL>;
-+ clock-names = "cpu", "intermediate";
-+ operating-points = <
-+ 598000 1150000
-+ 747500 1150000
-+ 1040000 1150000
-+ 1196000 1200000
-+ 1300000 1300000
-+ >;
- };
-- cpu@2 {
-+ cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
-+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
-+ <&apmixedsys CLK_APMIXED_MAINPLL>;
-+ clock-names = "cpu", "intermediate";
-+ operating-points = <
-+ 598000 1150000
-+ 747500 1150000
-+ 1040000 1150000
-+ 1196000 1200000
-+ 1300000 1300000
-+ >;
- };
-- cpu@3 {
-+ cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x3>;
-+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
-+ <&apmixedsys CLK_APMIXED_MAINPLL>;
-+ clock-names = "cpu", "intermediate";
-+ operating-points = <
-+ 598000 1150000
-+ 747500 1150000
-+ 1040000 1150000
-+ 1196000 1200000
-+ 1300000 1300000
-+ >;
- };
- };
-
-@@ -300,7 +340,7 @@
- clocks = <&pericfg CLK_PERI_NFI>, <&pericfg CLK_PERI_NFI_ECC>,
- <&pericfg CLK_PERI_NFI_PAD>;
- clock-names = "nfi_clk", "nfiecc_clk", "pad_clk";
-- nand-on-flash-bbt;
-+ // nand-on-flash-bbt;
- status = "disabled";
- };
-
-diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
-index b1f8a73..baf945e 100644
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -81,6 +81,15 @@ config ARM_KIRKWOOD_CPUFREQ
- This adds the CPUFreq driver for Marvell Kirkwood
- SoCs.
-
-+config ARM_MT7623_CPUFREQ
-+ bool "Mediatek MT7623 CPUFreq support"
-+ depends on ARCH_MEDIATEK && REGULATOR
-+ depends on ARM || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
-+ depends on !CPU_THERMAL || THERMAL=y
-+ select PM_OPP
-+ help
-+ This adds the CPUFreq driver support for Mediatek MT7623 SoC.
-+
- config ARM_MT8173_CPUFREQ
- bool "Mediatek MT8173 CPUFreq support"
- depends on ARCH_MEDIATEK && REGULATOR
-diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
-index c0af1a1..e198752 100644
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
- obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
- obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
- obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
-+obj-$(CONFIG_ARM_MT7623_CPUFREQ) += mt7623-cpufreq.o
- obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt8173-cpufreq.o
- obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
- obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
-diff --git a/drivers/cpufreq/mt7623-cpufreq.c b/drivers/cpufreq/mt7623-cpufreq.c
-new file mode 100644
-index 0000000..8d154ce
---- /dev/null
-+++ b/drivers/cpufreq/mt7623-cpufreq.c
-@@ -0,0 +1,389 @@
-+/*
-+ * Copyright (c) 2015 Linaro Ltd.
-+ * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/cpu.h>
-+#include <linux/cpu_cooling.h>
-+#include <linux/cpufreq.h>
-+#include <linux/cpumask.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+
-+#define VOLT_TOL (10000)
-+
-+/*
-+ * When scaling the clock frequency of a CPU clock domain, the clock source
-+ * needs to be switched to another stable PLL clock temporarily until
-+ * the original PLL becomes stable at target frequency.
-+ */
-+struct mtk_cpu_dvfs_info {
-+ struct device *cpu_dev;
-+ struct regulator *proc_reg;
-+ struct clk *cpu_clk;
-+ struct clk *inter_clk;
-+ struct thermal_cooling_device *cdev;
-+ int intermediate_voltage;
-+};
-+
-+static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc)
-+{
-+ return regulator_set_voltage(info->proc_reg, vproc,
-+ vproc + VOLT_TOL);
-+}
-+
-+static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
-+ unsigned int index)
-+{
-+ struct cpufreq_frequency_table *freq_table = policy->freq_table;
-+ struct clk *cpu_clk = policy->clk;
-+ struct clk *armpll = clk_get_parent(cpu_clk);
-+ struct mtk_cpu_dvfs_info *info = policy->driver_data;
-+ struct device *cpu_dev = info->cpu_dev;
-+ struct dev_pm_opp *opp;
-+ long freq_hz, old_freq_hz;
-+ int vproc, old_vproc, inter_vproc, target_vproc, ret;
-+
-+ inter_vproc = info->intermediate_voltage;
-+
-+ old_freq_hz = clk_get_rate(cpu_clk);
-+ old_vproc = regulator_get_voltage(info->proc_reg);
-+
-+ freq_hz = freq_table[index].frequency * 1000;
-+
-+ rcu_read_lock();
-+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
-+ if (IS_ERR(opp)) {
-+ rcu_read_unlock();
-+ pr_err("cpu%d: failed to find OPP for %ld\n",
-+ policy->cpu, freq_hz);
-+ return PTR_ERR(opp);
-+ }
-+ vproc = dev_pm_opp_get_voltage(opp);
-+ rcu_read_unlock();
-+
-+ /*
-+ * If the new voltage or the intermediate voltage is higher than the
-+ * current voltage, scale up voltage first.
-+ */
-+ target_vproc = (inter_vproc > vproc) ? inter_vproc : vproc;
-+ if (old_vproc < target_vproc) {
-+ ret = mtk_cpufreq_set_voltage(info, target_vproc);
-+ if (ret) {
-+ pr_err("cpu%d: failed to scale up voltage!\n",
-+ policy->cpu);
-+ mtk_cpufreq_set_voltage(info, old_vproc);
-+ return ret;
-+ }
-+ }
-+
-+ /* Reparent the CPU clock to intermediate clock. */
-+ ret = clk_set_parent(cpu_clk, info->inter_clk);
-+ if (ret) {
-+ pr_err("cpu%d: failed to re-parent cpu clock!\n",
-+ policy->cpu);
-+ mtk_cpufreq_set_voltage(info, old_vproc);
-+ WARN_ON(1);
-+ return ret;
-+ }
-+
-+ /* Set the original PLL to target rate. */
-+ ret = clk_set_rate(armpll, freq_hz);
-+ if (ret) {
-+ pr_err("cpu%d: failed to scale cpu clock rate!\n",
-+ policy->cpu);
-+ clk_set_parent(cpu_clk, armpll);
-+ mtk_cpufreq_set_voltage(info, old_vproc);
-+ return ret;
-+ }
-+
-+ /* Set parent of CPU clock back to the original PLL. */
-+ ret = clk_set_parent(cpu_clk, armpll);
-+ if (ret) {
-+ pr_err("cpu%d: failed to re-parent cpu clock!\n",
-+ policy->cpu);
-+ mtk_cpufreq_set_voltage(info, inter_vproc);
-+ WARN_ON(1);
-+ return ret;
-+ }
-+
-+ /*
-+ * If the new voltage is lower than the intermediate voltage or the
-+ * original voltage, scale down to the new voltage.
-+ */
-+ if (vproc < inter_vproc || vproc < old_vproc) {
-+ ret = mtk_cpufreq_set_voltage(info, vproc);
-+ if (ret) {
-+ pr_err("cpu%d: failed to scale down voltage!\n",
-+ policy->cpu);
-+ clk_set_parent(cpu_clk, info->inter_clk);
-+ clk_set_rate(armpll, old_freq_hz);
-+ clk_set_parent(cpu_clk, armpll);
-+ return ret;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
-+{
-+ struct mtk_cpu_dvfs_info *info = policy->driver_data;
-+ struct device_node *np = of_node_get(info->cpu_dev->of_node);
-+
-+ if (WARN_ON(!np))
-+ return;
-+
-+ if (of_find_property(np, "#cooling-cells", NULL)) {
-+ info->cdev = of_cpufreq_cooling_register(np,
-+ policy->related_cpus);
-+
-+ if (IS_ERR(info->cdev)) {
-+ dev_err(info->cpu_dev,
-+ "running cpufreq without cooling device: %ld\n",
-+ PTR_ERR(info->cdev));
-+
-+ info->cdev = NULL;
-+ }
-+ }
-+
-+ of_node_put(np);
-+}
-+
-+static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
-+{
-+ struct device *cpu_dev;
-+ struct regulator *proc_reg = ERR_PTR(-ENODEV);
-+ struct clk *cpu_clk = ERR_PTR(-ENODEV);
-+ struct clk *inter_clk = ERR_PTR(-ENODEV);
-+ struct dev_pm_opp *opp;
-+ unsigned long rate;
-+ int ret;
-+
-+ cpu_dev = get_cpu_device(cpu);
-+ if (!cpu_dev) {
-+ pr_err("failed to get cpu%d device\n", cpu);
-+ return -ENODEV;
-+ }
-+
-+ cpu_clk = clk_get(cpu_dev, "cpu");
-+ if (IS_ERR(cpu_clk)) {
-+ if (PTR_ERR(cpu_clk) == -EPROBE_DEFER)
-+ pr_warn("cpu clk for cpu%d not ready, retry.\n", cpu);
-+ else
-+ pr_err("failed to get cpu clk for cpu%d\n", cpu);
-+
-+ ret = PTR_ERR(cpu_clk);
-+ return ret;
-+ }
-+
-+ inter_clk = clk_get(cpu_dev, "intermediate");
-+ if (IS_ERR(inter_clk)) {
-+ if (PTR_ERR(inter_clk) == -EPROBE_DEFER)
-+ pr_warn("intermediate clk for cpu%d not ready, retry.\n",
-+ cpu);
-+ else
-+ pr_err("failed to get intermediate clk for cpu%d\n",
-+ cpu);
-+
-+ ret = PTR_ERR(inter_clk);
-+ goto out_free_resources;
-+ }
-+
-+ proc_reg = regulator_get_exclusive(cpu_dev, "proc");
-+ if (IS_ERR(proc_reg)) {
-+ if (PTR_ERR(proc_reg) == -EPROBE_DEFER)
-+ pr_warn("proc regulator for cpu%d not ready, retry.\n",
-+ cpu);
-+ else
-+ pr_err("failed to get proc regulator for cpu%d\n",
-+ cpu);
-+
-+ ret = PTR_ERR(proc_reg);
-+ goto out_free_resources;
-+ }
-+
-+ ret = dev_pm_opp_of_add_table(cpu_dev);
-+ if (ret) {
-+ pr_warn("no OPP table for cpu%d\n", cpu);
-+ goto out_free_resources;
-+ }
-+
-+ /* Search a safe voltage for intermediate frequency. */
-+ rate = clk_get_rate(inter_clk);
-+ rcu_read_lock();
-+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
-+ if (IS_ERR(opp)) {
-+ rcu_read_unlock();
-+ pr_err("failed to get intermediate opp for cpu%d\n", cpu);
-+ ret = PTR_ERR(opp);
-+ goto out_free_opp_table;
-+ }
-+ info->intermediate_voltage = dev_pm_opp_get_voltage(opp);
-+ rcu_read_unlock();
-+
-+ info->cpu_dev = cpu_dev;
-+ info->proc_reg = proc_reg;
-+ info->cpu_clk = cpu_clk;
-+ info->inter_clk = inter_clk;
-+
-+ return 0;
-+
-+out_free_opp_table:
-+ dev_pm_opp_of_remove_table(cpu_dev);
-+
-+out_free_resources:
-+ if (!IS_ERR(proc_reg))
-+ regulator_put(proc_reg);
-+ if (!IS_ERR(cpu_clk))
-+ clk_put(cpu_clk);
-+ if (!IS_ERR(inter_clk))
-+ clk_put(inter_clk);
-+
-+ return ret;
-+}
-+
-+static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)
-+{
-+ if (!IS_ERR(info->proc_reg))
-+ regulator_put(info->proc_reg);
-+ if (!IS_ERR(info->cpu_clk))
-+ clk_put(info->cpu_clk);
-+ if (!IS_ERR(info->inter_clk))
-+ clk_put(info->inter_clk);
-+
-+ dev_pm_opp_of_remove_table(info->cpu_dev);
-+}
-+
-+static int mtk_cpufreq_init(struct cpufreq_policy *policy)
-+{
-+ struct mtk_cpu_dvfs_info *info;
-+ struct cpufreq_frequency_table *freq_table;
-+ int ret;
-+
-+ info = kzalloc(sizeof(*info), GFP_KERNEL);
-+ if (!info)
-+ return -ENOMEM;
-+
-+ ret = mtk_cpu_dvfs_info_init(info, policy->cpu);
-+ if (ret) {
-+ pr_err("%s failed to initialize dvfs info for cpu%d\n",
-+ __func__, policy->cpu);
-+ goto out_free_dvfs_info;
-+ }
-+
-+ ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table);
-+ if (ret) {
-+ pr_err("failed to init cpufreq table for cpu%d: %d\n",
-+ policy->cpu, ret);
-+ goto out_release_dvfs_info;
-+ }
-+
-+ ret = cpufreq_table_validate_and_show(policy, freq_table);
-+ if (ret) {
-+ pr_err("%s: invalid frequency table: %d\n", __func__, ret);
-+ goto out_free_cpufreq_table;
-+ }
-+
-+ /* CPUs in the same cluster share a clock and power domain. */
-+ cpumask_setall(policy->cpus);
-+ policy->driver_data = info;
-+ policy->clk = info->cpu_clk;
-+
-+ return 0;
-+
-+out_free_cpufreq_table:
-+ dev_pm_opp_free_cpufreq_table(info->cpu_dev, &freq_table);
-+
-+out_release_dvfs_info:
-+ mtk_cpu_dvfs_info_release(info);
-+
-+out_free_dvfs_info:
-+ kfree(info);
-+
-+ return ret;
-+}
-+
-+static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
-+{
-+ struct mtk_cpu_dvfs_info *info = policy->driver_data;
-+
-+ cpufreq_cooling_unregister(info->cdev);
-+ dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table);
-+ mtk_cpu_dvfs_info_release(info);
-+ kfree(info);
-+
-+ return 0;
-+}
-+
-+static struct cpufreq_driver mt7623_cpufreq_driver = {
-+ .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-+ .verify = cpufreq_generic_frequency_table_verify,
-+ .target_index = mtk_cpufreq_set_target,
-+ .get = cpufreq_generic_get,
-+ .init = mtk_cpufreq_init,
-+ .exit = mtk_cpufreq_exit,
-+ .ready = mtk_cpufreq_ready,
-+ .name = "mtk-cpufreq",
-+ .attr = cpufreq_generic_attr,
-+};
-+
-+static int mt7623_cpufreq_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = cpufreq_register_driver(&mt7623_cpufreq_driver);
-+ if (ret)
-+ pr_err("failed to register mtk cpufreq driver\n");
-+
-+ return ret;
-+}
-+
-+static struct platform_driver mt7623_cpufreq_platdrv = {
-+ .driver = {
-+ .name = "mt7623-cpufreq",
-+ },
-+ .probe = mt7623_cpufreq_probe,
-+};
-+
-+static int mt7623_cpufreq_driver_init(void)
-+{
-+ struct platform_device *pdev;
-+ int err;
-+
-+ if (!of_machine_is_compatible("mediatek,mt7623"))
-+ return -ENODEV;
-+
-+ err = platform_driver_register(&mt7623_cpufreq_platdrv);
-+ if (err)
-+ return err;
-+
-+ /*
-+ * Since there's no place to hold device registration code and no
-+ * device tree based way to match cpufreq driver yet, both the driver
-+ * and the device registration codes are put here to handle defer
-+ * probing.
-+ */
-+ pdev = platform_device_register_simple("mt7623-cpufreq", -1, NULL, 0);
-+ if (IS_ERR(pdev)) {
-+ pr_err("failed to register mtk-cpufreq platform device\n");
-+ return PTR_ERR(pdev);
-+ }
-+
-+ return 0;
-+}
-+device_initcall(mt7623_cpufreq_driver_init);
---
-1.7.10.4
-
diff --git a/target/linux/mediatek/patches-4.4/0078-arm-mediatek-make-a7-timer-work.patch b/target/linux/mediatek/patches-4.4/0078-arm-mediatek-make-a7-timer-work.patch
deleted file mode 100644
index 69117dc76b..0000000000
--- a/target/linux/mediatek/patches-4.4/0078-arm-mediatek-make-a7-timer-work.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From e722886f122fd3dd6240160f21937d2f21e9d910 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 31 Mar 2016 06:07:01 +0200
-Subject: [PATCH 78/78] arm: mediatek: make a7 timer work Signed-off-by: John
- Crispin <blogic@openwrt.org>
-
----
- arch/arm/boot/dts/mt7623.dtsi | 2 ++
- arch/arm/mach-mediatek/Kconfig | 1 +
- arch/arm/mach-mediatek/mediatek.c | 1 +
- 3 files changed, 4 insertions(+)
-
-diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
-index 76d603a..cd08b6e 100644
---- a/arch/arm/boot/dts/mt7623.dtsi
-+++ b/arch/arm/boot/dts/mt7623.dtsi
-@@ -120,6 +120,8 @@
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+ clock-frequency = <13000000>;
-+ arm,cpu-registers-not-fw-configured;
- };
-
- topckgen: power-controller@10000000 {
-diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
-index a7fef77..2c05bc31 100644
---- a/arch/arm/mach-mediatek/Kconfig
-+++ b/arch/arm/mach-mediatek/Kconfig
-@@ -24,6 +24,7 @@ config MACH_MT6592
- config MACH_MT7623
- bool "MediaTek MT7623 SoCs support"
- default ARCH_MEDIATEK
-+ select HAVE_ARM_ARCH_TIMER
- select MIGHT_HAVE_PCI
-
- config MACH_MT8127
-diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
-index bcfca37..7553a8c 100644
---- a/arch/arm/mach-mediatek/mediatek.c
-+++ b/arch/arm/mach-mediatek/mediatek.c
-@@ -29,6 +29,7 @@ static void __init mediatek_timer_init(void)
- void __iomem *gpt_base;
-
- if (of_machine_is_compatible("mediatek,mt6589") ||
-+ of_machine_is_compatible("mediatek,mt7623") ||
- of_machine_is_compatible("mediatek,mt8135") ||
- of_machine_is_compatible("mediatek,mt8127")) {
- /* turn on GPT6 which ungates arch timer clocks */
---
-1.7.10.4
-