ramips: add support for Zbtlink WA05 router

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41579 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 126 insertions, 2 deletions

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index c2f768b8a3..00b604008e 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -181,6 +181,11 @@ case $board in
 		ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
 		ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
 		;;
+	zbt-wa05)
+		ucidef_set_led_default "power" "power" "zbtlink:blue:power" "1"
+		set_wifi_led "zbtlink:blue:air"
+		set_usb_led "zbtlink:blue:usb"
+		;;
 esac
 
 ucidef_commit_leds
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 4eef735d93..a14acb6252 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -112,7 +112,8 @@ ramips_setup_interfaces()
 	hg255d | \
 	rt-n14u | \
 	wrtnode | \
-	ur-326n4g)
+	ur-326n4g | \
+	zbt-wa05)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
 		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index ca339b354c..2ae8c9e8ff 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -307,6 +307,9 @@ ramips_board_detect() {
 	*"Sercomm NA930")
 		name="na930"
 		;;
+	*"Zbtlink ZBT-WA05")
+		name="zbt-wa05"
+		;;
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index a39c433e8f..805a63fed4 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -91,7 +91,8 @@ platform_check_image() {
 	wmr300 |\
 	wrtnode |\
 	x5 |\
-	x8)
+	x8 |\
+	zbt-wa05)
 		[ "$magic" != "27051956" ] && {
 			echo "Invalid image type."
 			return 1
diff --git a/target/linux/ramips/dts/ZBT-WA05.dts b/target/linux/ramips/dts/ZBT-WA05.dts
new file mode 100644
index 0000000000..714d2733a6
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-WA05.dts
@@ -0,0 +1,112 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+	compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
+	model = "Zbtlink ZBT-WA05";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus@10000000 {
+		gpio1: gpio@638 {
+			status = "okay";
+		};
+
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+
+		gpio3: gpio@688 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			en25q64@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x760000>;
+				};
+			};
+		};
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "llllw";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			default {
+				ralink,group = "i2c", "spi refclk", "wled";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "zbtlink:blue:power";
+			gpios = <&gpio1 14 1>;
+		};
+		usb {
+			label = "zbtlink:blue:usb";
+			gpios = <&gpio1 15 0>;
+		};
+		air {
+			label = "zbtlink:blue:air";
+			gpios = <&gpio3 0 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x198>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 5b23035b4e..e3ba60ed95 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -738,12 +738,14 @@ endif
 Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
 Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
 Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
+Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
 
 ifeq ($(SUBTARGET),mt7620n)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WMR300,$(1))
 	$(call Image/Build/Profile/RT-N14U,$(1))
 	$(call Image/Build/Profile/WRTNODE,$(1))
+	$(call Image/Build/Profile/ZBT-WA05,$(1))
 endef
 endif