aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohn Crispin <blogic@openwrt.org>2013-05-07 10:58:44 +0000
committerJohn Crispin <blogic@openwrt.org>2013-05-07 10:58:44 +0000
commite5d66838cf0b72a2f1faf961342911cb474446ea (patch)
treeb4fdba88551d959f2311939fba149b3632b72807
parent3ea1a86b5db7412076ad217183688b2e5afc335f (diff)
downloadupstream-e5d66838cf0b72a2f1faf961342911cb474446ea.tar.gz
upstream-e5d66838cf0b72a2f1faf961342911cb474446ea.tar.bz2
upstream-e5d66838cf0b72a2f1faf961342911cb474446ea.zip
ramips: drop 3.7 support
Signed-off-by; John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36572 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h27
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h29
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h26
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h24
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h88
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h41
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h48
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h23
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h76
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h56
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h17
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h127
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h169
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h56
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h17
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h27
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h216
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h152
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h55
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h16
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h207
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h25
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c250
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c487
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig83
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/Platform26
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile13
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c57
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c54
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c113
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c99
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c168
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c98
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig36
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile21
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c99
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h16
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c211
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h28
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c30
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c81
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c74
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c106
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c99
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c75
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c102
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c77
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c153
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c88
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig219
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile56
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c133
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h16
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c428
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h32
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c29
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c82
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c86
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c126
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c94
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c90
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c61
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c81
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c70
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c78
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c87
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c42
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c95
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c155
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c112
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c81
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c108
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c87
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c34
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c105
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c102
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c94
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c78
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c95
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c74
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c73
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c69
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c78
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c74
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c83
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c76
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c102
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c92
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c79
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c72
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c83
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c80
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c100
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c94
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c100
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c105
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c118
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c110
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c90
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c79
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c247
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c88
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig34
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile18
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c103
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h16
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c398
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h34
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c29
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c84
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c152
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c157
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c155
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c103
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c147
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c216
-rw-r--r--target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c88
-rw-r--r--target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Kconfig18
-rw-r--r--target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Makefile9
-rw-r--r--target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_debugfs.c127
-rw-r--r--target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_esw.c1132
-rw-r--r--target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_eth.h358
-rw-r--r--target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_main.c1212
-rw-r--r--target/linux/ramips/files-3.7/drivers/spi/spi-ramips.c559
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Kconfig24
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Makefile25
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dummy_audio.c1575
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.c966
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.h67
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.c3692
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.h1098
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil_intr.c750
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c1265
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.h83
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.c2852
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.h668
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c1873
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c684
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.c2523
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h248
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c3654
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_regs.h2075
-rw-r--r--target/linux/ramips/files-3.7/drivers/usb/dwc_otg/linux/dwc_otg_plat.h260
-rw-r--r--target/linux/ramips/files-3.7/drivers/watchdog/ramips_wdt.c355
-rw-r--r--target/linux/ramips/patches-3.7/001-mips-add-cp0-compare-irq-function.patch29
-rw-r--r--target/linux/ramips/patches-3.7/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch20
-rw-r--r--target/linux/ramips/patches-3.7/011-mtd-cfi_cmdset_0002-force-word-write.patch61
-rw-r--r--target/linux/ramips/patches-3.7/100-mips-ralink-core.patch39
-rw-r--r--target/linux/ramips/patches-3.7/101-rt288x_serial_driver_hack.patch89
-rw-r--r--target/linux/ramips/patches-3.7/102-rt288x-pci-driver-hook.patch10
-rw-r--r--target/linux/ramips/patches-3.7/103-ethernet.patch20
-rw-r--r--target/linux/ramips/patches-3.7/104-ramips-watchdog-driver.patch26
-rw-r--r--target/linux/ramips/patches-3.7/105-ramips-spi-driver.patch25
-rw-r--r--target/linux/ramips/patches-3.7/105-usb_dwc_otg.patch20
-rw-r--r--target/linux/ramips/patches-3.7/106-rt3883-pci-support.patch10
-rw-r--r--target/linux/ramips/patches-3.7/a01-revert-ehci-port_power_off-removal.patch21
-rw-r--r--target/linux/ramips/rt288x/config-3.7134
-rw-r--r--target/linux/ramips/rt305x/config-3.7168
-rw-r--r--target/linux/ramips/rt3883/config-3.7141
159 files changed, 0 insertions, 40087 deletions
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h
deleted file mode 100644
index bb6e12bf86..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_RALINK_COMMON_H
-#define __ASM_MACH_RALINK_COMMON_H
-
-#define RAMIPS_SYS_TYPE_LEN 64
-extern unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN];
-extern unsigned long ramips_mem_base;
-extern unsigned long ramips_mem_size_min;
-extern unsigned long ramips_mem_size_max;
-extern unsigned long (*ramips_get_mem_size)(void);
-
-void ramips_intc_irq_init(unsigned intc_base, unsigned irq, unsigned irq_base);
-u32 ramips_intc_get_status(void);
-
-void ramips_soc_prom_init(void);
-void ramips_soc_setup(void);
-void ramips_early_serial_setup(int line, unsigned base, unsigned freq,
- unsigned irq);
-
-#endif /* __ASM_MACH_RALINK_COMMON_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h
deleted file mode 100644
index 8eb5e16906..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Ralink SoC GPIO button support
- *
- * Copyright (C) 2010-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H
-#define __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#ifdef CONFIG_RALINK_DEV_GPIO_BUTTONS
-void
-ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons,
- struct gpio_keys_button *buttons);
-#else
-static inline void
-ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons,
- struct gpio_keys_button *buttons)
-{
-}
-#endif
-
-#endif /* __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h
deleted file mode 100644
index 24233abde6..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Ralink SoC GPIO LED device support
- *
- * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_RALINK_DEV_GPIO_LEDS_H
-#define __ASM_MACH_RALINK_DEV_GPIO_LEDS_H
-
-#include <linux/leds.h>
-
-#ifdef CONFIG_RALINK_DEV_GPIO_LEDS
-void ramips_register_gpio_leds(int id, unsigned num_leds,
- struct gpio_led *leds);
-#else
-static inline void ramips_register_gpio_leds(int id, unsigned num_leds,
- struct gpio_led *leds)
-{
-}
-#endif
-
-#endif /* __ASM_MACH_RALINK_DEV_GPIO_LEDS_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h
deleted file mode 100644
index f68ee16856..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Ralink SoC GPIO API support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_MACH_RALINK_GPIO_H
-#define __ASM_MACH_RALINK_GPIO_H
-
-#define ARCH_NR_GPIOS 128
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __ASM_MACH_RALINK_GPIO_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h
deleted file mode 100644
index 200f737f71..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Ralink machine types
- *
- * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mips_machine.h>
-
-enum ramips_mach_type {
- RAMIPS_MACH_GENERIC,
- /* RT2880 based machines */
- RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */
- RAMIPS_MACH_BR6524N, /* Edimax BR6524N */
- RAMIPS_MACH_RT_N15, /* Asus RT-N15 */
- RAMIPS_MACH_V11ST_FE, /* Ralink V11ST-FE */
- RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */
- RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */
-
- /* RT3050 based machines */
- RAMIPS_MACH_3G_6200N, /* Edimax 3G-6200N */
- RAMIPS_MACH_ALL0256N, /* Allnet ALL0256N */
- RAMIPS_MACH_CARAMBOLA, /* 8devices Carambola */
- RAMIPS_MACH_DIR_300_B1, /* D-Link DIR-300 B1 */
- RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
- RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */
- RAMIPS_MACH_DIR_615_D, /* D-Link DIR-615 D */
- RAMIPS_MACH_DIR_620_A1, /* D-Link DIR-620 A1 */
- RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */
- RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */
- RAMIPS_MACH_NW718, /* Netcore NW718 */
- RAMIPS_MACH_WL_330N, /* Asus WL-330N */
- RAMIPS_MACH_WL_330N3G, /* Asus WL-330N3G */
-
- /* RT3052 based machines */
- RAMIPS_MACH_3G300M, /* Tenda 3G300M */
- RAMIPS_MACH_ALL0239_3G, /* ALL0239-3G */
- RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */
- RAMIPS_MACH_BC2, /* NexAira BC2 */
- RAMIPS_MACH_BR6425, /* Edimax BR-6425 */
- RAMIPS_MACH_BROADWAY, /* Hauppauge Broadway */
- RAMIPS_MACH_DAP_1350, /* D-Link DAP-1350 */
- RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/
- RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
- RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */
- RAMIPS_MACH_RT_N13U, /* ASUS RT-N13U */
- RAMIPS_MACH_FREESTATION5, /* ARC Freestation5 */
- RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */
- RAMIPS_MACH_MOFI3500_3GN, /* MoFi Network MOFI3500-3GN */
- RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */
- RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */
- RAMIPS_MACH_PSR_680W, /* Petatel PSR-680W Wireless 3G Router*/
- RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
- RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/
- RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */
- RAMIPS_MACH_W306R_V20, /* Tenda W306R_V20 */
- RAMIPS_MACH_W502U, /* ALFA Networks W502U */
- RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */
- RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */
- RAMIPS_MACH_WL341V3, /* Sitecom WL-341 v3 */
- RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */
- RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/
- RAMIPS_MACH_WR6202, /* Accton WR6202 */
- RAMIPS_MACH_MZKW300NH2, /* Planex MZK-W300NH2 Router */
- RAMIPS_MACH_XDXRN502J, /* unknown XDX-RN502J */
- RAMIPS_MACH_UR_326N4G, /* UPVEL ROUTER */
- RAMIPS_MACH_UR_336UN, /* UPVEL ROUTER */
-
- /* RT3352 based machines */
- RAMIPS_MACH_ALL5002, /* Allnet ALL5002 */
- RAMIPS_MACH_DIR_615_H1,
-
- /* RT3662 based machines */
- RAMIPS_MACH_DIR_645, /* D-Link DIR-645 */
- RAMIPS_MACH_OMNI_EMB_HPM, /* Omnima EMB HPM */
- RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */
-
- /* RT3883 based machines */
- RAMIPS_MACH_TEW_691GR, /* TRENDnet TEW-691GR */
- RAMIPS_MACH_TEW_692GR, /* TRENDnet TEW-692GR */
-
- /* RT5350 based machines */
- RAMIPS_MACH_AIR3GII, /* AirLive Air3GII */
-};
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h
deleted file mode 100644
index 57c0556b93..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * based on Ralink SDK3.3
- * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _RAMIPS_ETH_PLATFORM_H
-#define _RAMIPS_ETH_PLATFORM_H
-
-#include <linux/phy.h>
-
-struct ramips_eth_platform_data
-{
- unsigned char mac[6];
- void (*reset_fe)(void);
- int min_pkt_len;
- unsigned long sys_freq;
-
- int speed;
- int duplex;
- int tx_fc;
- int rx_fc;
-
- u32 phy_mask;
- phy_interface_t phy_if_mode;
-};
-
-#endif /* _RAMIPS_ETH_PLATFORM_H */
-
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h
deleted file mode 100644
index 32fc7a7402..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Ralink SoC specific GPIO support
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RAMIPS_GPIO_H
-#define _RAMIPS_GPIO_H
-
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-
-enum ramips_gpio_reg {
- RAMIPS_GPIO_REG_INT = 0, /* Interrupt status */
- RAMIPS_GPIO_REG_EDGE,
- RAMIPS_GPIO_REG_RENA,
- RAMIPS_GPIO_REG_FENA,
- RAMIPS_GPIO_REG_DATA,
- RAMIPS_GPIO_REG_DIR, /* Direction, 0:in, 1: out */
- RAMIPS_GPIO_REG_POL, /* Polarity, 0: normal, 1: invert */
- RAMIPS_GPIO_REG_SET,
- RAMIPS_GPIO_REG_RESET,
- RAMIPS_GPIO_REG_TOGGLE,
- RAMIPS_GPIO_REG_MAX
-};
-
-struct ramips_gpio_chip {
- struct gpio_chip chip;
- unsigned long map_base;
- unsigned long map_size;
- u8 regs[RAMIPS_GPIO_REG_MAX];
-
- spinlock_t lock;
- void __iomem *regs_base;
-};
-
-struct ramips_gpio_data {
- unsigned int num_chips;
- struct ramips_gpio_chip *chips;
-};
-
-int ramips_gpio_init(struct ramips_gpio_data *data);
-
-#endif /* _RAMIPS_GPIO_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h
deleted file mode 100644
index 54203db8ea..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Platform data definition for the built-in NAND controller of the
- * Ralink RT305X/RT3662/RT3883 SoCs
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RAMIPS_NAND_PLATFORM_H
-#define _RAMIPS_NAND_PLATFORM_H
-
-#define RAMIPS_NAND_DRIVER_NAME "ramips-nand"
-
-struct ramips_nand_platform_data {
- const char *name;
- struct mtd_partition *parts;
- int nr_parts;
-};
-
-#endif /* _RAMIPS_NAND_PLATFORM_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h
deleted file mode 100644
index 10d7263324..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Ralink RT288x SoC specific definitions
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT288X_H_
-#define _RT288X_H_
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define RT288X_MEM_SIZE_MIN (2 * 1024 * 1024)
-#define RT288X_MEM_SIZE_MAX (128 * 1024 * 1024)
-
-#define RT288X_CPU_IRQ_BASE 0
-#define RT288X_INTC_IRQ_BASE 8
-#define RT288X_INTC_IRQ_COUNT 32
-#define RT288X_GPIO_IRQ_BASE 40
-
-#define RT288X_CPU_IRQ_INTC (RT288X_CPU_IRQ_BASE + 2)
-#define RT288X_CPU_IRQ_PCI (RT288X_CPU_IRQ_BASE + 4)
-#define RT288X_CPU_IRQ_FE (RT288X_CPU_IRQ_BASE + 5)
-#define RT288X_CPU_IRQ_WNIC (RT288X_CPU_IRQ_BASE + 6)
-#define RT288X_CPU_IRQ_COUNTER (RT288X_CPU_IRQ_BASE + 7)
-
-#define RT2880_INTC_IRQ_TIMER0 (RT288X_INTC_IRQ_BASE + 0)
-#define RT2880_INTC_IRQ_TIMER1 (RT288X_INTC_IRQ_BASE + 1)
-#define RT2880_INTC_IRQ_UART0 (RT288X_INTC_IRQ_BASE + 2)
-#define RT2880_INTC_IRQ_PIO (RT288X_INTC_IRQ_BASE + 3)
-#define RT2880_INTC_IRQ_PCM (RT288X_INTC_IRQ_BASE + 4)
-#define RT2880_INTC_IRQ_UART1 (RT288X_INTC_IRQ_BASE + 8)
-#define RT2880_INTC_IRQ_IA (RT288X_INTC_IRQ_BASE + 23)
-
-#define RT288X_GPIO_IRQ(x) (RT288X_GPIO_IRQ_BASE + (x))
-#define RT288X_GPIO_COUNT 32
-
-extern void __iomem *rt288x_sysc_base;
-extern void __iomem *rt288x_memc_base;
-
-static inline void rt288x_sysc_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, rt288x_sysc_base + reg);
-}
-
-static inline u32 rt288x_sysc_rr(unsigned reg)
-{
- return __raw_readl(rt288x_sysc_base + reg);
-}
-
-static inline void rt288x_memc_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, rt288x_memc_base + reg);
-}
-
-static inline u32 rt288x_memc_rr(unsigned reg)
-{
- return __raw_readl(rt288x_memc_base + reg);
-}
-
-void rt288x_gpio_init(u32 mode);
-
-#ifdef CONFIG_PCI
-int rt288x_register_pci(void);
-#else
-static inline int rt288x_register_pci(void) { return 0; }
-#endif /* CONFIG_PCI */
-
-#endif /* _RT228X_H_ */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
deleted file mode 100644
index 5e27363324..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Ralink RT288x specific CPU feature overrides
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This file was derived from: include/asm-mips/cpu-features.h
- * Copyright (C) 2003, 2004 Ralf Baechle
- * Copyright (C) 2004 Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_3k_cache 0
-#define cpu_has_4k_cache 1
-#define cpu_has_tx39_cache 0
-#define cpu_has_sb1_cache 0
-#define cpu_has_fpu 0
-#define cpu_has_32fpr 0
-#define cpu_has_counter 1
-#define cpu_has_watch 1
-#define cpu_has_divec 1
-
-#define cpu_has_prefetch 1
-#define cpu_has_ejtag 1
-#define cpu_has_llsc 1
-
-#define cpu_has_mips16 1
-#define cpu_has_mdmx 0
-#define cpu_has_mips3d 0
-#define cpu_has_smartmips 0
-
-#define cpu_has_mips32r1 1
-#define cpu_has_mips32r2 1
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#define cpu_has_dsp 0
-#define cpu_has_mipsmt 0
-
-#define cpu_has_64bits 0
-#define cpu_has_64bit_zero_reg 0
-#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
-
-#define cpu_dcache_line_size() 16
-#define cpu_icache_line_size() 16
-
-#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h
deleted file mode 100644
index 61264f3c6a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#ifndef __ASM_MACH_RALINK_RT288X_IRQ_H
-#define __ASM_MACH_RALINK_RT288X_IRQ_H
-
-#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 48
-
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_RALINK_RT288X_IRQ_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h
deleted file mode 100644
index b5f4812b5c..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Ralink RT288x SoC register definitions
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT288X_REGS_H_
-#define _RT288X_REGS_H_
-
-#include <linux/bitops.h>
-
-#define RT2880_SYSC_BASE 0x00300000
-#define RT2880_TIMER_BASE 0x00300100
-#define RT2880_INTC_BASE 0x00300200
-#define RT2880_MEMC_BASE 0x00300300
-#define RT2880_UART0_BASE 0x00300500
-#define RT2880_PIO_BASE 0x00300600
-#define RT2880_I2C_BASE 0x00300900
-#define RT2880_SPI_BASE 0x00300b00
-#define RT2880_UART1_BASE 0x00300c00
-#define RT2880_FE_BASE 0x00400000
-#define RT2880_ROM_BASE 0x00410000
-#define RT2880_PCM_BASE 0x00420000
-#define RT2880_PCI_BASE 0x00440000
-#define RT2880_WMAC_BASE 0x00480000
-#define RT2880_FLASH1_BASE 0x01000000
-#define RT2880_FLASH0_BASE 0x1dc00000
-#define RT2880_SDRAM_BASE 0x08000000
-
-#define RT2880_SYSC_SIZE 0x100
-#define RT2880_TIMER_SIZE 0x100
-#define RT2880_INTC_SIZE 0x100
-#define RT2880_MEMC_SIZE 0x100
-#define RT2880_UART0_SIZE 0x100
-#define RT2880_PIO_SIZE 0x100
-#define RT2880_UART1_SIZE 0x100
-#define RT2880_FLASH1_SIZE (16 * 1024 * 1024)
-#define RT2880_FLASH0_SIZE (32 * 1024 * 1024)
-
-/* SYSC registers */
-#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */
-#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */
-#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */
-#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */
-#define SYSC_REG_CLKCFG 0x030
-#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/
-#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/
-#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */
-#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */
-#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */
-
-#define CHIP_ID_ID_MASK 0xff
-#define CHIP_ID_ID_SHIFT 8
-#define CHIP_ID_REV_MASK 0xff
-
-#define SYSTEM_CONFIG_CPUCLK_SHIFT 20
-#define SYSTEM_CONFIG_CPUCLK_MASK 0x3
-#define SYSTEM_CONFIG_CPUCLK_250 0x0
-#define SYSTEM_CONFIG_CPUCLK_266 0x1
-#define SYSTEM_CONFIG_CPUCLK_280 0x2
-#define SYSTEM_CONFIG_CPUCLK_300 0x3
-
-#define CLKCFG_SRAM_CS_N_WDT BIT(9)
-
-#define RT2880_RESET_SYSTEM BIT(0)
-#define RT2880_RESET_TIMER BIT(1)
-#define RT2880_RESET_INTC BIT(2)
-#define RT2880_RESET_MEMC BIT(3)
-#define RT2880_RESET_CPU BIT(4)
-#define RT2880_RESET_UART0 BIT(5)
-#define RT2880_RESET_PIO BIT(6)
-#define RT2880_RESET_I2C BIT(9)
-#define RT2880_RESET_SPI BIT(11)
-#define RT2880_RESET_UART1 BIT(12)
-#define RT2880_RESET_PCI BIT(16)
-#define RT2880_RESET_WMAC BIT(17)
-#define RT2880_RESET_FE BIT(18)
-#define RT2880_RESET_PCM BIT(19)
-
-#define RT2880_GPIO_MODE_I2C BIT(0)
-#define RT2880_GPIO_MODE_UART0 BIT(1)
-#define RT2880_GPIO_MODE_SPI BIT(2)
-#define RT2880_GPIO_MODE_UART1 BIT(3)
-#define RT2880_GPIO_MODE_JTAG BIT(4)
-#define RT2880_GPIO_MODE_MDIO BIT(5)
-#define RT2880_GPIO_MODE_SDRAM BIT(6)
-#define RT2880_GPIO_MODE_PCI BIT(7)
-
-#define RT2880_INTC_INT_TIMER0 BIT(0)
-#define RT2880_INTC_INT_TIMER1 BIT(1)
-#define RT2880_INTC_INT_UART0 BIT(2)
-#define RT2880_INTC_INT_PIO BIT(3)
-#define RT2880_INTC_INT_PCM BIT(4)
-#define RT2880_INTC_INT_UART1 BIT(8)
-#define RT2880_INTC_INT_IA BIT(23)
-#define RT2880_INTC_INT_GLOBAL BIT(31)
-
-/* MEMC registers */
-#define MEMC_REG_SDRAM_CFG0 0x00
-#define MEMC_REG_SDRAM_CFG1 0x04
-#define MEMC_REG_FLASH_CFG0 0x08
-#define MEMC_REG_FLASH_CFG1 0x0c
-#define MEMC_REG_IA_ADDR 0x10
-#define MEMC_REG_IA_TYPE 0x14
-
-#define FLASH_CFG_WIDTH_SHIFT 26
-#define FLASH_CFG_WIDTH_MASK 0x3
-#define FLASH_CFG_WIDTH_8BIT 0x0
-#define FLASH_CFG_WIDTH_16BIT 0x1
-#define FLASH_CFG_WIDTH_32BIT 0x2
-
-/* UART registers */
-#define UART_REG_RX 0
-#define UART_REG_TX 1
-#define UART_REG_IER 2
-#define UART_REG_IIR 3
-#define UART_REG_FCR 4
-#define UART_REG_LCR 5
-#define UART_REG_MCR 6
-#define UART_REG_LSR 7
-
-#endif /* _RT288X_REGS_H_ */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h
deleted file mode 100644
index c59135c1ab..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Ralink RT305x SoC specific definitions
- *
- * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT305X_H_
-#define _RT305X_H_
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-enum rt305x_soc_type {
- RT305X_SOC_UNKNOWN = 0,
- RT305X_SOC_RT3050,
- RT305X_SOC_RT3052,
- RT305X_SOC_RT3350,
- RT305X_SOC_RT3352,
- RT305X_SOC_RT5350,
-};
-
-extern enum rt305x_soc_type rt305x_soc;
-
-static inline int soc_is_rt3050(void)
-{
- return rt305x_soc == RT305X_SOC_RT3050;
-}
-
-static inline int soc_is_rt3052(void)
-{
- return rt305x_soc == RT305X_SOC_RT3052;
-}
-
-static inline int soc_is_rt305x(void)
-{
- return soc_is_rt3050() || soc_is_rt3052();
-}
-
-static inline int soc_is_rt3350(void)
-{
- return rt305x_soc == RT305X_SOC_RT3350;
-}
-
-static inline int soc_is_rt3352(void)
-{
- return rt305x_soc == RT305X_SOC_RT3352;
-}
-
-static inline int soc_is_rt5350(void)
-{
- return rt305x_soc == RT305X_SOC_RT5350;
-}
-
-#define RT305X_MEM_SIZE_MIN (2 * 1024 * 1024)
-#define RT305X_MEM_SIZE_MAX (64 * 1024 * 1024)
-
-#define RT3352_MEM_SIZE_MIN (2 * 1024 * 1024)
-#define RT3352_MEM_SIZE_MAX (256 * 1024 * 1024)
-
-#define RT305X_CPU_IRQ_BASE 0
-#define RT305X_INTC_IRQ_BASE 8
-#define RT305X_INTC_IRQ_COUNT 32
-#define RT305X_GPIO_IRQ_BASE 40
-
-#define RT305X_CPU_IRQ_INTC (RT305X_CPU_IRQ_BASE + 2)
-#define RT305X_CPU_IRQ_FE (RT305X_CPU_IRQ_BASE + 5)
-#define RT305X_CPU_IRQ_WNIC (RT305X_CPU_IRQ_BASE + 6)
-#define RT305X_CPU_IRQ_COUNTER (RT305X_CPU_IRQ_BASE + 7)
-
-#define RT305X_INTC_IRQ_SYSCTL (RT305X_INTC_IRQ_BASE + 0)
-#define RT305X_INTC_IRQ_TIMER0 (RT305X_INTC_IRQ_BASE + 1)
-#define RT305X_INTC_IRQ_TIMER1 (RT305X_INTC_IRQ_BASE + 2)
-#define RT305X_INTC_IRQ_IA (RT305X_INTC_IRQ_BASE + 3)
-#define RT305X_INTC_IRQ_PCM (RT305X_INTC_IRQ_BASE + 4)
-#define RT305X_INTC_IRQ_UART0 (RT305X_INTC_IRQ_BASE + 5)
-#define RT305X_INTC_IRQ_PIO (RT305X_INTC_IRQ_BASE + 6)
-#define RT305X_INTC_IRQ_DMA (RT305X_INTC_IRQ_BASE + 7)
-#define RT305X_INTC_IRQ_NAND (RT305X_INTC_IRQ_BASE + 8)
-#define RT305X_INTC_IRQ_PERFC (RT305X_INTC_IRQ_BASE + 9)
-#define RT305X_INTC_IRQ_I2S (RT305X_INTC_IRQ_BASE + 10)
-#define RT305X_INTC_IRQ_UART1 (RT305X_INTC_IRQ_BASE + 12)
-#define RT305X_INTC_IRQ_ESW (RT305X_INTC_IRQ_BASE + 17)
-#define RT305X_INTC_IRQ_OTG (RT305X_INTC_IRQ_BASE + 18)
-
-extern void __iomem *rt305x_sysc_base;
-extern void __iomem *rt305x_memc_base;
-
-static inline void rt305x_sysc_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, rt305x_sysc_base + reg);
-}
-
-static inline u32 rt305x_sysc_rr(unsigned reg)
-{
- return __raw_readl(rt305x_sysc_base + reg);
-}
-
-static inline void rt305x_memc_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, rt305x_memc_base + reg);
-}
-
-static inline u32 rt305x_memc_rr(unsigned reg)
-{
- return __raw_readl(rt305x_memc_base + reg);
-}
-
-#define RT305X_GPIO_I2C_SD 1
-#define RT305X_GPIO_I2C_SCLK 2
-#define RT305X_GPIO_SPI_EN 3
-#define RT305X_GPIO_SPI_CLK 4
-#define RT305X_GPIO_SPI_DOUT 5
-#define RT305X_GPIO_SPI_DIN 6
-/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */
-#define RT305X_GPIO_7 7
-#define RT305X_GPIO_8 8
-#define RT305X_GPIO_9 9
-#define RT305X_GPIO_10 10
-#define RT305X_GPIO_11 11
-#define RT305X_GPIO_12 12
-#define RT305X_GPIO_13 13
-#define RT305X_GPIO_14 14
-#define RT305X_GPIO_UART1_TXD 15
-#define RT305X_GPIO_UART1_RXD 16
-#define RT305X_GPIO_JTAG_TDO 17
-#define RT305X_GPIO_JTAG_TDI 18
-#define RT305X_GPIO_JTAG_TMS 19
-#define RT305X_GPIO_JTAG_TCLK 20
-#define RT305X_GPIO_JTAG_TRST_N 21
-#define RT305X_GPIO_MDIO_MDC 22
-#define RT305X_GPIO_MDIO_MDIO 23
-#define RT305X_GPIO_SDRAM_MD16 24
-#define RT305X_GPIO_SDRAM_MD17 25
-#define RT305X_GPIO_SDRAM_MD18 26
-#define RT305X_GPIO_SDRAM_MD19 27
-#define RT305X_GPIO_SDRAM_MD20 28
-#define RT305X_GPIO_SDRAM_MD21 29
-#define RT305X_GPIO_SDRAM_MD22 30
-#define RT305X_GPIO_SDRAM_MD23 31
-#define RT305X_GPIO_SDRAM_MD24 32
-#define RT305X_GPIO_SDRAM_MD25 33
-#define RT305X_GPIO_SDRAM_MD26 34
-#define RT305X_GPIO_SDRAM_MD27 35
-#define RT305X_GPIO_SDRAM_MD28 36
-#define RT305X_GPIO_SDRAM_MD29 37
-#define RT305X_GPIO_SDRAM_MD30 38
-#define RT305X_GPIO_SDRAM_MD31 39
-#define RT305X_GPIO_GE0_TXD0 40
-#define RT305X_GPIO_GE0_TXD1 41
-#define RT305X_GPIO_GE0_TXD2 42
-#define RT305X_GPIO_GE0_TXD3 43
-#define RT305X_GPIO_GE0_TXEN 44
-#define RT305X_GPIO_GE0_TXCLK 45
-#define RT305X_GPIO_GE0_RXD0 46
-#define RT305X_GPIO_GE0_RXD1 47
-#define RT305X_GPIO_GE0_RXD2 48
-#define RT305X_GPIO_GE0_RXD3 49
-#define RT305X_GPIO_GE0_RXDV 50
-#define RT305X_GPIO_GE0_RXCLK 51
-
-void rt305x_gpio_init(u32 mode);
-
-#endif /* _RT305X_H_ */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
deleted file mode 100644
index 8c1261106c..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Ralink RT305x specific CPU feature overrides
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This file was derived from: include/asm-mips/cpu-features.h
- * Copyright (C) 2003, 2004 Ralf Baechle
- * Copyright (C) 2004 Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_3k_cache 0
-#define cpu_has_4k_cache 1
-#define cpu_has_tx39_cache 0
-#define cpu_has_sb1_cache 0
-#define cpu_has_fpu 0
-#define cpu_has_32fpr 0
-#define cpu_has_counter 1
-#define cpu_has_watch 1
-#define cpu_has_divec 1
-
-#define cpu_has_prefetch 1
-#define cpu_has_ejtag 1
-#define cpu_has_llsc 1
-
-#define cpu_has_mips16 1
-#define cpu_has_mdmx 0
-#define cpu_has_mips3d 0
-#define cpu_has_smartmips 0
-
-#define cpu_has_mips32r1 1
-#define cpu_has_mips32r2 1
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#define cpu_has_dsp 1
-#define cpu_has_mipsmt 0
-
-#define cpu_has_64bits 0
-#define cpu_has_64bit_zero_reg 0
-#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
-
-#define cpu_dcache_line_size() 32
-#define cpu_icache_line_size() 32
-
-#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h
deleted file mode 100644
index a72d677142..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#ifndef __ASM_MACH_RALINK_RT305X_IRQ_H
-#define __ASM_MACH_RALINK_RT305X_IRQ_H
-
-#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 48
-
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_RALINK_RT305X_IRQ_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
deleted file mode 100644
index 2098c5cc1f..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Ralink RT305x SoC platform device registration
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT305X_ESW_PLATFORM_H
-#define _RT305X_ESW_PLATFORM_H
-
-enum {
- RT305X_ESW_VLAN_CONFIG_NONE = 0,
- RT305X_ESW_VLAN_CONFIG_LLLLW,
- RT305X_ESW_VLAN_CONFIG_WLLLL,
-};
-
-struct rt305x_esw_platform_data
-{
- u8 vlan_config;
- u32 reg_initval_fct2;
- u32 reg_initval_fpa2;
-};
-
-#endif /* _RT305X_ESW_PLATFORM_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h
deleted file mode 100644
index 943facb6de..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Ralink RT305 SoC register definitions
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT305X_REGS_H_
-#define _RT305X_REGS_H_
-
-#include <linux/bitops.h>
-
-#define RT305X_SDRAM_BASE 0x00000000
-#define RT305X_SYSC_BASE 0x10000000
-#define RT305X_TIMER_BASE 0x10000100
-#define RT305X_INTC_BASE 0x10000200
-#define RT305X_MEMC_BASE 0x10000300
-#define RT305X_PCM_BASE 0x10000400
-#define RT305X_UART0_BASE 0x10000500
-#define RT305X_PIO_BASE 0x10000600
-#define RT305X_GDMA_BASE 0x10000700
-#define RT305X_NANDC_BASE 0x10000800
-#define RT305X_I2C_BASE 0x10000900
-#define RT305X_I2S_BASE 0x10000a00
-#define RT305X_SPI_BASE 0x10000b00
-#define RT305X_UART1_BASE 0x10000c00
-#define RT305X_FE_BASE 0x10100000
-#define RT305X_SWITCH_BASE 0x10110000
-#define RT305X_WMAC_BASE 0x10180000
-#define RT305X_OTG_BASE 0x101c0000
-#define RT305X_ROM_BASE 0x00400000
-#define RT305X_FLASH1_BASE 0x1b000000
-#define RT305X_FLASH0_BASE 0x1f000000
-
-#define RT305X_SYSC_SIZE 0x100
-#define RT305X_TIMER_SIZE 0x100
-#define RT305X_INTC_SIZE 0x100
-#define RT305X_MEMC_SIZE 0x100
-#define RT305X_UART0_SIZE 0x100
-#define RT305X_PIO_SIZE 0x100
-#define RT305X_UART1_SIZE 0x100
-#define RT305X_SPI_SIZE 0x100
-#define RT305X_FLASH1_SIZE (16 * 1024 * 1024)
-#define RT305X_FLASH0_SIZE (8 * 1024 * 1024)
-
-#define RT3352_EHCI_BASE 0x101c0000
-#define RT3352_EHCI_SIZE 0x1000
-#define RT3352_OHCI_BASE 0x101c1000
-#define RT3352_OHCI_SIZE 0x1000
-
-/* SYSC registers */
-#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */
-#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */
-#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */
-#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */
-#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/
-#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/
-#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */
-#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */
-#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */
-
-#define RT3352_SYSC_REG_SYSCFG1 0x014
-#define RT3352_SYSC_REG_CLKCFG1 0x030
-#define RT3352_SYSC_REG_RSTCTRL 0x034
-#define RT3352_SYSC_REG_USB_PS 0x05c
-
-#define RT3052_CHIP_NAME0 0x30335452
-#define RT3052_CHIP_NAME1 0x20203235
-
-#define RT3350_CHIP_NAME0 0x33335452
-#define RT3350_CHIP_NAME1 0x20203035
-
-#define RT3352_CHIP_NAME0 0x33335452
-#define RT3352_CHIP_NAME1 0x20203235
-
-#define RT5350_CHIP_NAME0 0x33355452
-#define RT5350_CHIP_NAME1 0x20203035
-
-#define CHIP_ID_ID_MASK 0xff
-#define CHIP_ID_ID_SHIFT 8
-#define CHIP_ID_REV_MASK 0xff
-
-#define RT305X_SYSCFG_CPUCLK_SHIFT 18
-#define RT305X_SYSCFG_CPUCLK_MASK 0x1
-#define RT305X_SYSCFG_CPUCLK_LOW 0x0
-#define RT305X_SYSCFG_CPUCLK_HIGH 0x1
-#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2
-#define RT305X_SYSCFG_SRAM_CS0_MODE_MASK 0x3
-#define RT305X_SYSCFG_SRAM_CS0_MODE_NORMAL 0
-#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 1
-#define RT305X_SYSCFG_SRAM_CS0_MODE_BTCOEX 2
-
-#define RT3352_SYSCFG0_CPUCLK_SHIFT 8
-#define RT3352_SYSCFG0_CPUCLK_MASK 0x1
-#define RT3352_SYSCFG0_CPUCLK_LOW 0x0
-#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1
-
-#define RT5350_SYSCFG0_CPUCLK_SHIFT 8
-#define RT5350_SYSCFG0_CPUCLK_MASK 0x3
-#define RT5350_SYSCFG0_CPUCLK_360 0x0
-#define RT5350_SYSCFG0_CPUCLK_320 0x2
-#define RT5350_SYSCFG0_CPUCLK_300 0x3
-#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12
-#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7
-#define RT5350_SYSCFG0_DRAM_SIZE_2M 0
-#define RT5350_SYSCFG0_DRAM_SIZE_8M 1
-#define RT5350_SYSCFG0_DRAM_SIZE_16M 2
-#define RT5350_SYSCFG0_DRAM_SIZE_32M 3
-#define RT5350_SYSCFG0_DRAM_SIZE_64M 4
-
-#define RT3352_SYSCFG0_XTAL_SEL BIT(20)
-
-#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
-
-#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18)
-#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20)
-
-#define RT305X_GPIO_MODE_I2C BIT(0)
-#define RT305X_GPIO_MODE_SPI BIT(1)
-#define RT305X_GPIO_MODE_UART0_SHIFT 2
-#define RT305X_GPIO_MODE_UART0_MASK 0x7
-#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
-#define RT305X_GPIO_MODE_UARTF 0x0
-#define RT305X_GPIO_MODE_PCM_UARTF 0x1
-#define RT305X_GPIO_MODE_PCM_I2S 0x2
-#define RT305X_GPIO_MODE_I2S_UARTF 0x3
-#define RT305X_GPIO_MODE_PCM_GPIO 0x4
-#define RT305X_GPIO_MODE_GPIO_UARTF 0x5
-#define RT305X_GPIO_MODE_GPIO_I2S 0x6
-#define RT305X_GPIO_MODE_GPIO 0x7
-#define RT305X_GPIO_MODE_UART1 BIT(5)
-#define RT305X_GPIO_MODE_JTAG BIT(6)
-#define RT305X_GPIO_MODE_MDIO BIT(7)
-#define RT305X_GPIO_MODE_SDRAM BIT(8)
-#define RT305X_GPIO_MODE_RGMII BIT(9)
-
-#define RT305X_RESET_SYSTEM BIT(0)
-#define RT305X_RESET_TIMER BIT(8)
-#define RT305X_RESET_INTC BIT(9)
-#define RT305X_RESET_MEMC BIT(10)
-#define RT305X_RESET_PCM BIT(11)
-#define RT305X_RESET_UART0 BIT(12)
-#define RT305X_RESET_PIO BIT(13)
-#define RT305X_RESET_DMA BIT(14)
-#define RT305X_RESET_I2C BIT(16)
-#define RT305X_RESET_I2S BIT(17)
-#define RT305X_RESET_SPI BIT(18)
-#define RT305X_RESET_UART1 BIT(19)
-#define RT305X_RESET_WNIC BIT(20)
-#define RT305X_RESET_FE BIT(21)
-#define RT305X_RESET_OTG BIT(22)
-#define RT305X_RESET_ESW BIT(23)
-
-#define RT3352_RSTCTRL_SYS BIT(0)
-#define RT3352_RSTCTRL_TIMER BIT(8)
-#define RT3352_RSTCTRL_INTC BIT(9)
-#define RT3352_RSTCTRL_MEMC BIT(10)
-#define RT3352_RSTCTRL_PCM BIT(11)
-#define RT3352_RSTCTRL_UART0 BIT(12)
-#define RT3352_RSTCTRL_PIO BIT(13)
-#define RT3352_RSTCTRL_DMA BIT(14)
-#define RT3352_RSTCTRL_I2C BIT(16)
-#define RT3352_RSTCTRL_I2S BIT(17)
-#define RT3352_RSTCTRL_SPI BIT(18)
-#define RT3352_RSTCTRL_UART1 BIT(19)
-#define RT3352_RSTCTRL_WNIC BIT(20)
-#define RT3352_RSTCTRL_FE BIT(21)
-#define RT3352_RSTCTRL_UHST BIT(22)
-#define RT3352_RSTCTRL_ESW BIT(23)
-#define RT3352_RSTCTRL_EPHY BIT(24)
-#define RT3352_RSTCTRL_UDEV BIT(25)
-
-#define RT305X_INTC_INT_SYSCTL BIT(0)
-#define RT305X_INTC_INT_TIMER0 BIT(1)
-#define RT305X_INTC_INT_TIMER1 BIT(2)
-#define RT305X_INTC_INT_IA BIT(3)
-#define RT305X_INTC_INT_PCM BIT(4)
-#define RT305X_INTC_INT_UART0 BIT(5)
-#define RT305X_INTC_INT_PIO BIT(6)
-#define RT305X_INTC_INT_DMA BIT(7)
-#define RT305X_INTC_INT_NAND BIT(8)
-#define RT305X_INTC_INT_PERFC BIT(9)
-#define RT305X_INTC_INT_I2S BIT(10)
-#define RT305X_INTC_INT_UART1 BIT(12)
-#define RT305X_INTC_INT_ESW BIT(17)
-#define RT305X_INTC_INT_OTG BIT(18)
-#define RT305X_INTC_INT_GLOBAL BIT(31)
-
-/* MEMC registers */
-#define MEMC_REG_SDRAM_CFG0 0x00
-#define MEMC_REG_SDRAM_CFG1 0x04
-#define MEMC_REG_FLASH_CFG0 0x08
-#define MEMC_REG_FLASH_CFG1 0x0c
-#define MEMC_REG_IA_ADDR 0x10
-#define MEMC_REG_IA_TYPE 0x14
-
-#define FLASH_CFG_WIDTH_SHIFT 26
-#define FLASH_CFG_WIDTH_MASK 0x3
-#define FLASH_CFG_WIDTH_8BIT 0x0
-#define FLASH_CFG_WIDTH_16BIT 0x1
-#define FLASH_CFG_WIDTH_32BIT 0x2
-
-/* UART registers */
-#define UART_REG_RX 0
-#define UART_REG_TX 1
-#define UART_REG_IER 2
-#define UART_REG_IIR 3
-#define UART_REG_FCR 4
-#define UART_REG_LCR 5
-#define UART_REG_MCR 6
-#define UART_REG_LSR 7
-
-#endif /* _RT305X_REGS_H_ */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h
deleted file mode 100644
index cf8fb6fd10..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC specific definitions
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT3883_H_
-#define _RT3883_H_
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define RT3883_MEM_SIZE_MIN (2 * 1024 * 1024)
-#define RT3883_MEM_SIZE_MAX (256 * 1024 * 1024)
-
-#define RT3883_CPU_IRQ_BASE 0
-#define RT3883_CPU_IRQ_COUNT 8
-#define RT3883_INTC_IRQ_BASE (RT3883_CPU_IRQ_BASE + RT3883_CPU_IRQ_COUNT)
-#define RT3883_INTC_IRQ_COUNT 32
-#define RT3883_GPIO_IRQ_BASE (RT3883_INTC_IRQ_BASE + RT3883_INTC_IRQ_COUNT)
-#define RT3883_GPIO_IRQ_COUNT 96
-#define RT3883_PCI_IRQ_BASE (RT3883_GPIO_IRQ_BASE + RT3883_GPIO_IRQ_COUNT)
-#define RT3883_PCI_IRQ_COUNT 3
-
-#define RT3883_CPU_IRQ_INTC (RT3883_CPU_IRQ_BASE + 2)
-#define RT3883_CPU_IRQ_PCI (RT3883_CPU_IRQ_BASE + 4)
-#define RT3883_CPU_IRQ_FE (RT3883_CPU_IRQ_BASE + 5)
-#define RT3883_CPU_IRQ_WLAN (RT3883_CPU_IRQ_BASE + 6)
-#define RT3883_CPU_IRQ_COUNTER (RT3883_CPU_IRQ_BASE + 7)
-
-#define RT3883_INTC_IRQ_SYSCTL (RT3883_INTC_IRQ_BASE + 0)
-#define RT3883_INTC_IRQ_TIMER0 (RT3883_INTC_IRQ_BASE + 1)
-#define RT3883_INTC_IRQ_TIMER1 (RT3883_INTC_IRQ_BASE + 2)
-#define RT3883_INTC_IRQ_IA (RT3883_INTC_IRQ_BASE + 3)
-#define RT3883_INTC_IRQ_PCM (RT3883_INTC_IRQ_BASE + 4)
-#define RT3883_INTC_IRQ_UART0 (RT3883_INTC_IRQ_BASE + 5)
-#define RT3883_INTC_IRQ_PIO (RT3883_INTC_IRQ_BASE + 6)
-#define RT3883_INTC_IRQ_DMA (RT3883_INTC_IRQ_BASE + 7)
-#define RT3883_INTC_IRQ_NAND (RT3883_INTC_IRQ_BASE + 8)
-#define RT3883_INTC_IRQ_PERFC (RT3883_INTC_IRQ_BASE + 9)
-#define RT3883_INTC_IRQ_I2S (RT3883_INTC_IRQ_BASE + 10)
-#define RT3883_INTC_IRQ_UART1 (RT3883_INTC_IRQ_BASE + 12)
-#define RT3883_INTC_IRQ_UHST (RT3883_INTC_IRQ_BASE + 18)
-#define RT3883_INTC_IRQ_UDEV (RT3883_INTC_IRQ_BASE + 19)
-
-#define RT3883_PCI_IRQ_PCI0 (RT3883_PCI_IRQ_BASE + 0)
-#define RT3883_PCI_IRQ_PCI1 (RT3883_PCI_IRQ_BASE + 1)
-#define RT3883_PCI_IRQ_PCIE (RT3883_PCI_IRQ_BASE + 2)
-
-extern void __iomem *rt3883_sysc_base;
-extern void __iomem *rt3883_memc_base;
-
-static inline void rt3883_sysc_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, rt3883_sysc_base + reg);
-}
-
-static inline u32 rt3883_sysc_rr(unsigned reg)
-{
- return __raw_readl(rt3883_sysc_base + reg);
-}
-
-static inline void rt3883_memc_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, rt3883_memc_base + reg);
-}
-
-static inline u32 rt3883_memc_rr(unsigned reg)
-{
- return __raw_readl(rt3883_memc_base + reg);
-}
-
-#define RT3883_GPIO_I2C_SD 1
-#define RT3883_GPIO_I2C_SCLK 2
-#define RT3883_GPIO_SPI_CS0 3
-#define RT3883_GPIO_SPI_CLK 4
-#define RT3883_GPIO_SPI_MOSI 5
-#define RT3883_GPIO_SPI_MISO 6
-/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */
-#define RT3883_GPIO_7 7
-#define RT3883_GPIO_8 8
-#define RT3883_GPIO_9 9
-#define RT3883_GPIO_10 10
-#define RT3883_GPIO_11 11
-#define RT3883_GPIO_12 12
-#define RT3883_GPIO_13 13
-#define RT3883_GPIO_14 14
-#define RT3883_GPIO_UART1_TXD 15
-#define RT3883_GPIO_UART1_RXD 16
-#define RT3883_GPIO_JTAG_TDO 17
-#define RT3883_GPIO_JTAG_TDI 18
-#define RT3883_GPIO_JTAG_TMS 19
-#define RT3883_GPIO_JTAG_TCLK 20
-#define RT3883_GPIO_JTAG_TRST_N 21
-#define RT3883_GPIO_MDIO_MDC 22
-#define RT3883_GPIO_MDIO_MDIO 23
-#define RT3883_GPIO_LNA_PE_A0 32
-#define RT3883_GPIO_LNA_PE_A1 33
-#define RT3883_GPIO_LNA_PE_A2 34
-#define RT3883_GPIO_LNA_PE_G0 35
-#define RT3883_GPIO_LNA_PE_G1 36
-#define RT3883_GPIO_LNA_PE_G2 37
-#define RT3883_GPIO_PCI_AD0 40
-#define RT3883_GPIO_PCI_AD31 71
-#define RT3883_GPIO_GE2_TXD0 72
-#define RT3883_GPIO_GE2_TXD1 73
-#define RT3883_GPIO_GE2_TXD2 74
-#define RT3883_GPIO_GE2_TXD3 75
-#define RT3883_GPIO_GE2_TXEN 76
-#define RT3883_GPIO_GE2_TXCLK 77
-#define RT3883_GPIO_GE2_RXD0 78
-#define RT3883_GPIO_GE2_RXD1 79
-#define RT3883_GPIO_GE2_RXD2 80
-#define RT3883_GPIO_GE2_RXD3 81
-#define RT3883_GPIO_GE2_RXDV 82
-#define RT3883_GPIO_GE2_RXCLK 83
-#define RT3883_GPIO_GE1_TXD0 84
-#define RT3883_GPIO_GE1_TXD1 85
-#define RT3883_GPIO_GE1_TXD2 86
-#define RT3883_GPIO_GE1_TXD3 87
-#define RT3883_GPIO_GE1_TXEN 88
-#define RT3883_GPIO_GE1_TXCLK 89
-#define RT3883_GPIO_GE1_RXD0 90
-#define RT3883_GPIO_GE1_RXD1 91
-#define RT3883_GPIO_GE1_RXD2 92
-#define RT3883_GPIO_GE1_RXD3 93
-#define RT3883_GPIO_GE1_RXDV 94
-#define RT3883_GPIO_GE1_RXCLK 95
-
-void rt3883_gpio_init(u32 mode);
-
-#define RT3883_PCI_MODE_PCI 0x01
-#define RT3883_PCI_MODE_PCIE 0x02
-#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE)
-
-struct pci_dev;
-
-#ifdef CONFIG_PCI
-void rt3883_pci_init(unsigned mode);
-void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *));
-#else
-static inline void rt3883_pci_init(unsigned mode) {}
-static inline void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *)) {}
-#endif /* CONFIG_PCI */
-
-#endif /* _RT3883_H_ */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
deleted file mode 100644
index ac435dd330..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Ralink RT3662/RT3883 specific CPU feature overrides
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: include/asm-mips/cpu-features.h
- * Copyright (C) 2003, 2004 Ralf Baechle
- * Copyright (C) 2004 Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_3k_cache 0
-#define cpu_has_4k_cache 1
-#define cpu_has_tx39_cache 0
-#define cpu_has_sb1_cache 0
-#define cpu_has_fpu 0
-#define cpu_has_32fpr 0
-#define cpu_has_counter 1
-#define cpu_has_watch 1
-#define cpu_has_divec 1
-
-#define cpu_has_prefetch 1
-#define cpu_has_ejtag 1
-#define cpu_has_llsc 1
-
-#define cpu_has_mips16 1
-#define cpu_has_mdmx 0
-#define cpu_has_mips3d 0
-#define cpu_has_smartmips 0
-
-#define cpu_has_mips32r1 1
-#define cpu_has_mips32r2 1
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#define cpu_has_dsp 1
-#define cpu_has_mipsmt 0
-
-#define cpu_has_64bits 0
-#define cpu_has_64bit_zero_reg 0
-#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
-
-#define cpu_dcache_line_size() 32
-#define cpu_icache_line_size() 32
-
-#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h
deleted file mode 100644
index 635d68c101..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#ifndef __ASM_MACH_RALINK_RT3883_IRQ_H
-#define __ASM_MACH_RALINK_RT3883_IRQ_H
-
-#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 140
-
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_RALINK_RT3883_IRQ_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h
deleted file mode 100644
index b36cabe858..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC register definitions
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT3883_REGS_H_
-#define _RT3883_REGS_H_
-
-#include <linux/bitops.h>
-
-#define RT3883_SDRAM_BASE 0x00000000
-#define RT3883_SYSC_BASE 0x10000000
-#define RT3883_TIMER_BASE 0x10000100
-#define RT3883_INTC_BASE 0x10000200
-#define RT3883_MEMC_BASE 0x10000300
-#define RT3883_UART0_BASE 0x10000500
-#define RT3883_PIO_BASE 0x10000600
-#define RT3883_FSCC_BASE 0x10000700
-#define RT3883_NANDC_BASE 0x10000810
-#define RT3883_I2C_BASE 0x10000900
-#define RT3883_I2S_BASE 0x10000a00
-#define RT3883_SPI_BASE 0x10000b00
-#define RT3883_UART1_BASE 0x10000c00
-#define RT3883_PCM_BASE 0x10002000
-#define RT3883_GDMA_BASE 0x10002800
-#define RT3883_CODEC1_BASE 0x10003000
-#define RT3883_CODEC2_BASE 0x10003800
-#define RT3883_FE_BASE 0x10100000
-#define RT3883_ROM_BASE 0x10118000
-#define RT3883_USBDEV_BASE 0x10112000
-#define RT3883_PCI_BASE 0x10140000
-#define RT3883_WLAN_BASE 0x10180000
-#define RT3883_USBHOST_BASE 0x101c0000
-#define RT3883_BOOT_BASE 0x1c000000
-#define RT3883_SRAM_BASE 0x1e000000
-#define RT3883_PCIMEM_BASE 0x20000000
-
-#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE)
-#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000)
-
-#define RT3883_SYSC_SIZE 0x100
-#define RT3883_TIMER_SIZE 0x100
-#define RT3883_INTC_SIZE 0x100
-#define RT3883_MEMC_SIZE 0x100
-#define RT3883_UART0_SIZE 0x100
-#define RT3883_UART1_SIZE 0x100
-#define RT3883_PIO_SIZE 0x100
-#define RT3883_FSCC_SIZE 0x100
-#define RT3883_NANDC_SIZE 0x0f0
-#define RT3883_I2C_SIZE 0x100
-#define RT3883_I2S_SIZE 0x100
-#define RT3883_SPI_SIZE 0x100
-#define RT3883_PCM_SIZE 0x800
-#define RT3883_GDMA_SIZE 0x800
-#define RT3883_CODEC1_SIZE 0x800
-#define RT3883_CODEC2_SIZE 0x800
-#define RT3883_FE_SIZE 0x10000
-#define RT3883_ROM_SIZE 0x4000
-#define RT3883_USBDEV_SIZE 0x4000
-#define RT3883_PCI_SIZE 0x40000
-#define RT3883_WLAN_SIZE 0x40000
-#define RT3883_USBHOST_SIZE 0x40000
-#define RT3883_BOOT_SIZE (32 * 1024 * 1024)
-#define RT3883_SRAM_SIZE (32 * 1024 * 1024)
-
-/* SYSC registers */
-#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */
-#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */
-#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */
-#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */
-#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */
-#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */
-#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */
-#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/
-#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/
-#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */
-#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */
-#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c
-#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80
-#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84
-#define RT3883_SYSC_REG_PMU 0x88
-#define RT3883_SYSC_REG_PMU1 0x8c
-
-#define RT3883_REVID_VER_ID_MASK 0x0f
-#define RT3883_REVID_VER_ID_SHIFT 8
-#define RT3883_REVID_ECO_ID_MASK 0x0f
-
-#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17)
-#define RT3883_SYSCFG0_CPUCLK_SHIFT 8
-#define RT3883_SYSCFG0_CPUCLK_MASK 0x3
-#define RT3883_SYSCFG0_CPUCLK_250 0x0
-#define RT3883_SYSCFG0_CPUCLK_384 0x1
-#define RT3883_SYSCFG0_CPUCLK_480 0x2
-#define RT3883_SYSCFG0_CPUCLK_500 0x3
-
-#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10)
-#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8)
-#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7)
-#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6)
-#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2)
-
-#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21)
-#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20)
-#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
-#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
-
-#define RT3883_GPIO_MODE_I2C BIT(0)
-#define RT3883_GPIO_MODE_SPI BIT(1)
-#define RT3883_GPIO_MODE_UART0_SHIFT 2
-#define RT3883_GPIO_MODE_UART0_MASK 0x7
-#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
-#define RT3883_GPIO_MODE_UARTF 0x0
-#define RT3883_GPIO_MODE_PCM_UARTF 0x1
-#define RT3883_GPIO_MODE_PCM_I2S 0x2
-#define RT3883_GPIO_MODE_I2S_UARTF 0x3
-#define RT3883_GPIO_MODE_PCM_GPIO 0x4
-#define RT3883_GPIO_MODE_GPIO_UARTF 0x5
-#define RT3883_GPIO_MODE_GPIO_I2S 0x6
-#define RT3883_GPIO_MODE_GPIO 0x7
-#define RT3883_GPIO_MODE_UART1 BIT(5)
-#define RT3883_GPIO_MODE_JTAG BIT(6)
-#define RT3883_GPIO_MODE_MDIO BIT(7)
-#define RT3883_GPIO_MODE_GE1 BIT(9)
-#define RT3883_GPIO_MODE_GE2 BIT(10)
-#define RT3883_GPIO_MODE_PCI_SHIFT 11
-#define RT3883_GPIO_MODE_PCI_MASK 0x7
-#define RT3883_GPIO_MODE_PCI(_x) ((_x) << RT3883_GPIO_MODE_PCI_SHIFT)
-#define RT3883_GPIO_MODE_PCI_DEV 0
-#define RT3883_GPIO_MODE_PCI_HOST2 1
-#define RT3883_GPIO_MODE_PCI_HOST1 2
-#define RT3883_GPIO_MODE_PCI_FNC 3
-#define RT3883_GPIO_MODE_PCI_GPIO 7
-#define RT3883_GPIO_MODE_LNA_A_SHIFT 16
-#define RT3883_GPIO_MODE_LNA_A_MASK 0x3
-#define RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT)
-#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3
-#define RT3883_GPIO_MODE_LNA_G_SHIFT 18
-#define RT3883_GPIO_MODE_LNA_G_MASK 0x3
-#define RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT)
-#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
-
-#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27)
-#define RT3883_RSTCTRL_FLASH BIT(26)
-#define RT3883_RSTCTRL_UDEV BIT(25)
-#define RT3883_RSTCTRL_PCI BIT(24)
-#define RT3883_RSTCTRL_PCIE BIT(23)
-#define RT3883_RSTCTRL_UHST BIT(22)
-#define RT3883_RSTCTRL_FE BIT(21)
-#define RT3883_RSTCTRL_WLAN BIT(20)
-#define RT3883_RSTCTRL_UART1 BIT(29)
-#define RT3883_RSTCTRL_SPI BIT(18)
-#define RT3883_RSTCTRL_I2S BIT(17)
-#define RT3883_RSTCTRL_I2C BIT(16)
-#define RT3883_RSTCTRL_NAND BIT(15)
-#define RT3883_RSTCTRL_DMA BIT(14)
-#define RT3883_RSTCTRL_PIO BIT(13)
-#define RT3883_RSTCTRL_UART BIT(12)
-#define RT3883_RSTCTRL_PCM BIT(11)
-#define RT3883_RSTCTRL_MC BIT(10)
-#define RT3883_RSTCTRL_INTC BIT(9)
-#define RT3883_RSTCTRL_TIMER BIT(8)
-#define RT3883_RSTCTRL_SYS BIT(0)
-
-#define RT3883_INTC_INT_SYSCTL BIT(0)
-#define RT3883_INTC_INT_TIMER0 BIT(1)
-#define RT3883_INTC_INT_TIMER1 BIT(2)
-#define RT3883_INTC_INT_IA BIT(3)
-#define RT3883_INTC_INT_PCM BIT(4)
-#define RT3883_INTC_INT_UART0 BIT(5)
-#define RT3883_INTC_INT_PIO BIT(6)
-#define RT3883_INTC_INT_DMA BIT(7)
-#define RT3883_INTC_INT_NAND BIT(8)
-#define RT3883_INTC_INT_PERFC BIT(9)
-#define RT3883_INTC_INT_I2S BIT(10)
-#define RT3883_INTC_INT_UART1 BIT(12)
-#define RT3883_INTC_INT_UHST BIT(18)
-#define RT3883_INTC_INT_UDEV BIT(19)
-
-/* FLASH/SRAM/Codec Controller registers */
-#define RT3883_FSCC_REG_FLASH_CFG0 0x00
-#define RT3883_FSCC_REG_FLASH_CFG1 0x04
-#define RT3883_FSCC_REG_CODEC_CFG0 0x40
-#define RT3883_FSCC_REG_CODEC_CFG1 0x44
-
-#define RT3883_FLASH_CFG_WIDTH_SHIFT 26
-#define RT3883_FLASH_CFG_WIDTH_MASK 0x3
-#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0
-#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1
-#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2
-
-
-/* UART registers */
-#define RT3883_UART_REG_RX 0
-#define RT3883_UART_REG_TX 1
-#define RT3883_UART_REG_IER 2
-#define RT3883_UART_REG_IIR 3
-#define RT3883_UART_REG_FCR 4
-#define RT3883_UART_REG_LCR 5
-#define RT3883_UART_REG_MCR 6
-#define RT3883_UART_REG_LSR 7
-
-#endif /* _RT3883_REGS_H_ */
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h
deleted file mode 100644
index a7b712cf2d..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MACH_RALINK_WAR_H
-#define __ASM_MACH_RALINK_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MACH_RALINK_WAR_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c
deleted file mode 100644
index f67902272c..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Ralink RT288x SoC PCI register definitions
- *
- * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/init.h>
-
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-
-#define RT2880_PCI_MEM_BASE 0x20000000
-#define RT2880_PCI_MEM_SIZE 0x10000000
-#define RT2880_PCI_IO_BASE 0x00460000
-#define RT2880_PCI_IO_SIZE 0x00010000
-
-#define RT2880_PCI_REG_PCICFG_ADDR 0x00
-#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
-#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
-#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
-#define RT2880_PCI_REG_CONFIG_ADDR 0x20
-#define RT2880_PCI_REG_CONFIG_DATA 0x24
-#define RT2880_PCI_REG_MEMBASE 0x28
-#define RT2880_PCI_REG_IOBASE 0x2c
-#define RT2880_PCI_REG_ID 0x30
-#define RT2880_PCI_REG_CLASS 0x34
-#define RT2880_PCI_REG_SUBID 0x38
-#define RT2880_PCI_REG_ARBCTL 0x80
-
-static void __iomem *rt2880_pci_base;
-static DEFINE_SPINLOCK(rt2880_pci_lock);
-
-static u32 rt2880_pci_reg_read(u32 reg)
-{
- return readl(rt2880_pci_base + reg);
-}
-
-static void rt2880_pci_reg_write(u32 val, u32 reg)
-{
- writel(val, rt2880_pci_base + reg);
-}
-
-static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
- unsigned int func, unsigned int where)
-{
- return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
- 0x80000000);
-}
-
-static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned long flags;
- u32 address;
- u32 data;
-
- address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
- PCI_FUNC(devfn), where);
-
- spin_lock_irqsave(&rt2880_pci_lock, flags);
- rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
- data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
- case 2:
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- break;
- case 4:
- *val = data;
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- u32 address;
- u32 data;
-
- address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
- PCI_FUNC(devfn), where);
-
- spin_lock_irqsave(&rt2880_pci_lock, flags);
- rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
- data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
-
- switch (size) {
- case 1:
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- break;
- case 2:
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- break;
- case 4:
- data = val;
- break;
- }
-
- rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops rt2880_pci_ops = {
- .read = rt2880_pci_config_read,
- .write = rt2880_pci_config_write,
-};
-
-static struct resource rt2880_pci_mem_resource = {
- .name = "PCI MEM space",
- .start = RT2880_PCI_MEM_BASE,
- .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource rt2880_pci_io_resource = {
- .name = "PCI IO space",
- .start = RT2880_PCI_IO_BASE,
- .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct pci_controller rt2880_pci_controller = {
- .pci_ops = &rt2880_pci_ops,
- .mem_resource = &rt2880_pci_mem_resource,
- .io_resource = &rt2880_pci_io_resource,
-};
-
-static inline u32 rt2880_pci_read_u32(unsigned long reg)
-{
- unsigned long flags;
- u32 address;
- u32 ret;
-
- address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
-
- spin_lock_irqsave(&rt2880_pci_lock, flags);
- rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
- ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-
- return ret;
-}
-
-static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
-{
- unsigned long flags;
- u32 address;
-
- address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
-
- spin_lock_irqsave(&rt2880_pci_lock, flags);
- rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
- rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- u16 cmd;
- int irq = -1;
-
- if (dev->bus->number != 0)
- return irq;
-
- switch (PCI_SLOT(dev->devfn)) {
- case 0x00:
- rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
- (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
- break;
- case 0x11:
- irq = RT288X_CPU_IRQ_PCI;
- break;
- default:
- printk("%s:%s[%d] trying to alloc unknown pci irq\n",
- __FILE__, __func__, __LINE__);
- BUG();
- break;
- }
-
- pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14);
- pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF);
- pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
- PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
- pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd);
- pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE,
- dev->irq);
- return irq;
-}
-
-int __init rt288x_register_pci(void)
-{
- void __iomem *io_map_base;
- int i;
-
- rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
-
- io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
- rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
- set_io_port_base((unsigned long) io_map_base);
-
- ioport_resource.start = RT2880_PCI_IO_BASE;
- ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
-
- rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
- for(i = 0; i < 0xfffff; i++) {}
-
- rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
- rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
- rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
- rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
- rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
- rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
- rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
- rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
- rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
-
- rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
- (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
-
- register_pci_controller(&rt2880_pci_controller);
- return 0;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c
deleted file mode 100644
index 8a4c8ce61a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * Ralink RT3883 SoC PCI support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-
-#define RT3883_MEMORY_BASE 0x00000000
-#define RT3883_MEMORY_SIZE 0x02000000
-
-#define RT3883_PCI_MEM_BASE 0x20000000
-#define RT3883_PCI_MEM_SIZE 0x10000000
-#define RT3883_PCI_IO_BASE 0x10160000
-#define RT3883_PCI_IO_SIZE 0x00010000
-
-#define RT3883_PCI_REG_PCICFG_ADDR 0x00
-#define RT3883_PCI_REG_PCIRAW_ADDR 0x04
-#define RT3883_PCI_REG_PCIINT_ADDR 0x08
-#define RT3883_PCI_REG_PCIMSK_ADDR 0x0c
-#define RT3833_PCI_PCIINT_PCIE BIT(20)
-#define RT3833_PCI_PCIINT_PCI1 BIT(19)
-#define RT3833_PCI_PCIINT_PCI0 BIT(18)
-
-#define RT3883_PCI_REG_CONFIG_ADDR 0x20
-#define RT3883_PCI_REG_CONFIG_DATA 0x24
-#define RT3883_PCI_REG_MEMBASE 0x28
-#define RT3883_PCI_REG_IOBASE 0x2c
-#define RT3883_PCI_REG_ARBCTL 0x80
-
-#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000)
-#define RT3883_PCI_REG_BAR0SETUP_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10)
-#define RT3883_PCI_REG_IMBASEBAR0_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18)
-#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30)
-#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34)
-#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38)
-#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50)
-
-static int (*rt3883_pci_plat_dev_init)(struct pci_dev *dev);
-static void __iomem *rt3883_pci_base;
-static DEFINE_SPINLOCK(rt3883_pci_lock);
-
-static inline u32 rt3883_pci_rr(unsigned reg)
-{
- return readl(rt3883_pci_base + reg);
-}
-
-static inline void rt3883_pci_wr(u32 val, unsigned reg)
-{
- writel(val, rt3883_pci_base + reg);
-}
-
-static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
- unsigned int func, unsigned int where)
-{
- return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
- 0x80000000);
-}
-
-static u32 rt3883_pci_read_u32(unsigned bus, unsigned slot,
- unsigned func, unsigned reg)
-{
- unsigned long flags;
- u32 address;
- u32 ret;
-
- address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
-
- spin_lock_irqsave(&rt3883_pci_lock, flags);
- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR);
- ret = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt3883_pci_lock, flags);
-
- return ret;
-}
-
-static void rt3883_pci_write_u32(unsigned bus, unsigned slot,
- unsigned func, unsigned reg, u32 val)
-{
- unsigned long flags;
- u32 address;
-
- address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
-
- spin_lock_irqsave(&rt3883_pci_lock, flags);
- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR);
- rt3883_pci_wr(val, RT3883_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt3883_pci_lock, flags);
-}
-
-static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- u32 pending;
-
- pending = rt3883_pci_rr(RT3883_PCI_REG_PCIINT_ADDR) &
- rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR);
-
- if (!pending) {
- spurious_interrupt();
- return;
- }
-
- if (pending & RT3833_PCI_PCIINT_PCI0)
- generic_handle_irq(RT3883_PCI_IRQ_PCI0);
-
- if (pending & RT3833_PCI_PCIINT_PCI1)
- generic_handle_irq(RT3883_PCI_IRQ_PCI1);
-
- if (pending & RT3833_PCI_PCIINT_PCIE)
- generic_handle_irq(RT3883_PCI_IRQ_PCIE);
-}
-
-static void rt3883_pci_irq_unmask(struct irq_data *d)
-{
- int irq = d->irq;
- u32 mask;
- u32 t;
-
- switch (irq) {
- case RT3883_PCI_IRQ_PCI0:
- mask = RT3833_PCI_PCIINT_PCI0;
- break;
- case RT3883_PCI_IRQ_PCI1:
- mask = RT3833_PCI_PCIINT_PCI1;
- break;
- case RT3883_PCI_IRQ_PCIE:
- mask = RT3833_PCI_PCIINT_PCIE;
- break;
- default:
- BUG();
- }
-
- t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR);
- rt3883_pci_wr(t | mask, RT3883_PCI_REG_PCIMSK_ADDR);
- /* flush write */
- rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR);
-}
-
-static void rt3883_pci_irq_mask(struct irq_data *d)
-{
- int irq = d->irq;
- u32 mask;
- u32 t;
-
- switch (irq) {
- case RT3883_PCI_IRQ_PCI0:
- mask = RT3833_PCI_PCIINT_PCI0;
- break;
- case RT3883_PCI_IRQ_PCI1:
- mask = RT3833_PCI_PCIINT_PCI1;
- break;
- case RT3883_PCI_IRQ_PCIE:
- mask = RT3833_PCI_PCIINT_PCIE;
- break;
- default:
- BUG();
- }
-
- t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR);
- rt3883_pci_wr(t & ~mask, RT3883_PCI_REG_PCIMSK_ADDR);
- /* flush write */
- rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR);
-}
-
-static struct irq_chip rt3883_pci_irq_chip = {
- .name = "RT3883 PCI",
- .irq_mask = rt3883_pci_irq_mask,
- .irq_unmask = rt3883_pci_irq_unmask,
- .irq_mask_ack = rt3883_pci_irq_mask,
-};
-
-static void __init rt3883_pci_irq_init(void)
-{
- int i;
-
- /* disable all interrupts */
- rt3883_pci_wr(0, RT3883_PCI_REG_PCIMSK_ADDR);
-
- for (i = RT3883_PCI_IRQ_BASE;
- i < RT3883_PCI_IRQ_BASE + RT3883_PCI_IRQ_COUNT; i++) {
- irq_set_chip_and_handler(i, &rt3883_pci_irq_chip,
- handle_level_irq);
- }
-
- irq_set_chained_handler(RT3883_CPU_IRQ_PCI, rt3883_pci_irq_handler);
-}
-
-static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned long flags;
- u32 address;
- u32 data;
-
- address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
- PCI_FUNC(devfn), where);
-
- spin_lock_irqsave(&rt3883_pci_lock, flags);
- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR);
- data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt3883_pci_lock, flags);
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
- case 2:
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- break;
- case 4:
- *val = data;
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- u32 address;
- u32 data;
-
- address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
- PCI_FUNC(devfn), where);
-
- spin_lock_irqsave(&rt3883_pci_lock, flags);
- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR);
- data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA);
-
- switch (size) {
- case 1:
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- break;
- case 2:
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- break;
- case 4:
- data = val;
- break;
- }
-
- rt3883_pci_wr(data, RT3883_PCI_REG_CONFIG_DATA);
- spin_unlock_irqrestore(&rt3883_pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops rt3883_pci_ops = {
- .read = rt3883_pci_config_read,
- .write = rt3883_pci_config_write,
-};
-
-static struct resource rt3883_pci_mem_resource = {
- .name = "PCI MEM space",
- .start = RT3883_PCI_MEM_BASE,
- .end = RT3883_PCI_MEM_BASE + RT3883_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource rt3883_pci_io_resource = {
- .name = "PCI IO space",
- .start = RT3883_PCI_IO_BASE,
- .end = RT3883_PCI_IO_BASE + RT3883_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct pci_controller rt3883_pci_controller = {
- .pci_ops = &rt3883_pci_ops,
- .mem_resource = &rt3883_pci_mem_resource,
- .io_resource = &rt3883_pci_io_resource,
-};
-
-static void rt3883_pci_preinit(unsigned mode)
-{
- u32 syscfg1;
- u32 rstctrl;
- u32 clkcfg1;
-
- if (mode & RT3883_PCI_MODE_PCIE) {
- u32 val;
-
- val = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1);
- val &= ~(0x30);
- val |= (2 << 4);
- rt3883_sysc_wr(val, RT3883_SYSC_REG_SYSCFG1);
-
- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0);
- val &= ~BIT(31);
- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0);
-
- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1);
- val &= 0x80ffffff;
- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1);
-
- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1);
- val |= 0xa << 24;
- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1);
-
- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0);
- val |= BIT(31);
- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0);
-
- msleep(50);
- }
-
- syscfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1);
- syscfg1 &= ~(RT3883_SYSCFG1_PCIE_RC_MODE |
- RT3883_SYSCFG1_PCI_HOST_MODE);
-
- rstctrl = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
- rstctrl |= (RT3883_RSTCTRL_PCI | RT3883_RSTCTRL_PCIE);
-
- clkcfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1);
- clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN |
- RT3883_CLKCFG1_PCIE_CLK_EN);
-
- if (mode & RT3883_PCI_MODE_PCI) {
- syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE;
- clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN;
- rstctrl &= ~RT3883_RSTCTRL_PCI;
- }
- if (mode & RT3883_PCI_MODE_PCIE) {
- syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE |
- RT3883_SYSCFG1_PCIE_RC_MODE;
- clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN;
- rstctrl &= ~RT3883_RSTCTRL_PCIE;
- }
-
- rt3883_sysc_wr(syscfg1, RT3883_SYSC_REG_SYSCFG1);
- rt3883_sysc_wr(rstctrl, RT3883_SYSC_REG_RSTCTRL);
- rt3883_sysc_wr(clkcfg1, RT3883_SYSC_REG_CLKCFG1);
-
- msleep(500);
-}
-
-static int rt3883_pcie_ready(void)
-{
- u32 status;
-
- msleep(500);
-
- status = rt3883_pci_rr(RT3883_PCI_REG_STATUS(1));
- if (status & BIT(0))
- return 0;
-
- /* TODO: reset PCIe and turn off PCIe clock */
-
- return -ENODEV;
-}
-
-void __init rt3883_pci_init(unsigned mode)
-{
- u32 val;
- int err;
-
- rt3883_pci_preinit(mode);
-
- rt3883_pci_base = ioremap(RT3883_PCI_BASE, PAGE_SIZE);
- if (rt3883_pci_base == NULL) {
- pr_err("failed to ioremap PCI registers\n");
- return;
- }
-
- rt3883_pci_wr(0, RT3883_PCI_REG_PCICFG_ADDR);
- if (mode & RT3883_PCI_MODE_PCI)
- rt3883_pci_wr(BIT(16), RT3883_PCI_REG_PCICFG_ADDR);
-
- msleep(500);
-
- if (mode & RT3883_PCI_MODE_PCIE) {
- err = rt3883_pcie_ready();
- if (err)
- return;
- }
-
- if (mode & RT3883_PCI_MODE_PCI)
- rt3883_pci_wr(0x79, RT3883_PCI_REG_ARBCTL);
-
- rt3883_pci_wr(RT3883_PCI_MEM_BASE, RT3883_PCI_REG_MEMBASE);
- rt3883_pci_wr(RT3883_PCI_IO_BASE, RT3883_PCI_REG_IOBASE);
-
- /* PCI */
- rt3883_pci_wr(0x03ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(0));
- rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(0));
- rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(0));
- rt3883_pci_wr(0x00800001, RT3883_PCI_REG_CLASS(0));
- rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(0));
-
- /* PCIe */
- rt3883_pci_wr(0x01ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(1));
- rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(1));
- rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(1));
- rt3883_pci_wr(0x06040001, RT3883_PCI_REG_CLASS(1));
- rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(1));
-
- rt3883_pci_irq_init();
-
- /* PCIe */
- val = rt3883_pci_read_u32(0, 0x01, 0, PCI_COMMAND);
- val |= 0x7;
- rt3883_pci_write_u32(0, 0x01, 0, PCI_COMMAND, val);
-
- /* PCI */
- val = rt3883_pci_read_u32(0, 0x00, 0, PCI_COMMAND);
- val |= 0x7;
- rt3883_pci_write_u32(0, 0x00, 0, PCI_COMMAND, val);
-
- ioport_resource.start = rt3883_pci_io_resource.start;
- ioport_resource.end = rt3883_pci_io_resource.end;
-
- register_pci_controller(&rt3883_pci_controller);
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- switch (dev->bus->number) {
- case 0:
- switch (PCI_SLOT(dev->devfn)) {
- case 0x00:
- rt3883_pci_wr(0x03ff0001,
- RT3883_PCI_REG_BAR0SETUP_ADDR(0));
- rt3883_pci_wr(0x03ff0001,
- RT3883_PCI_REG_BAR0SETUP_ADDR(1));
-
- rt3883_pci_write_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0,
- RT3883_MEMORY_BASE);
- rt3883_pci_read_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0);
-
- irq = RT3883_CPU_IRQ_PCI;
- break;
- case 0x01:
- rt3883_pci_write_u32(0, 0x01, 0, PCI_IO_BASE,
- 0x00000101);
- break;
- case 0x11:
- irq = RT3883_PCI_IRQ_PCI0;
- break;
- case 0x12:
- irq = RT3883_PCI_IRQ_PCI1;
- break;
- }
- break;
-
- case 1:
- irq = RT3883_PCI_IRQ_PCIE;
- break;
-
- default:
- dev_err(&dev->dev, "no IRQ specified\n");
- return irq;
- }
-
- return irq;
-}
-
-void __init rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *dev))
-{
- rt3883_pci_plat_dev_init = f;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- if (rt3883_pci_plat_dev_init)
- return rt3883_pci_plat_dev_init(dev);
-
- return 0;
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig
deleted file mode 100644
index 74bca6d0e9..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-if MIPS_RALINK
-
-choice
- prompt "Ralink SoC selection"
- default SOC_RT288X
- help
- Select Ralink MIPS SoC type.
-
- config RALINK_RT288X
- bool "RT288x"
- select SOC_RT288X
-
- config RALINK_RT305X
- bool "RT305x"
- select SOC_RT305X
-
- config RALINK_RT3883
- bool "RT3883"
- select SOC_RT3883
-
-endchoice
-
-source "arch/mips/ralink/rt288x/Kconfig"
-source "arch/mips/ralink/rt305x/Kconfig"
-source "arch/mips/ralink/rt3883/Kconfig"
-
-config SOC_RT288X
- bool
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select IRQ_CPU
- select ARCH_REQUIRE_GPIOLIB
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_EARLY_PRINTK
- select MIPS_MACHINE
- select HAVE_CLK
-
-config SOC_RT305X
- bool
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select IRQ_CPU
- select ARCH_REQUIRE_GPIOLIB
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_EARLY_PRINTK
- select MIPS_MACHINE
- select USB_ARCH_HAS_HCD
- select USB_ARCH_HAS_OHCI
- select USB_ARCH_HAS_EHCI
- select HAVE_CLK
-
-config SOC_RT3883
- bool
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select IRQ_CPU
- select ARCH_REQUIRE_GPIOLIB
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_EARLY_PRINTK
- select MIPS_MACHINE
- select USB_ARCH_HAS_OHCI
- select USB_ARCH_HAS_EHCI
- select HAVE_CLK
-
-config RALINK_DEV_GPIO_BUTTONS
- def_bool n
-
-config RALINK_DEV_GPIO_LEDS
- def_bool n
-
-endif
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/Platform b/target/linux/ramips/files-3.7/arch/mips/ralink/Platform
deleted file mode 100644
index 1b540492c2..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/Platform
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Ralink SoC common stuff
-#
-core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/
-cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
-
-#
-# Ralink RT288x
-#
-core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/
-cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
-load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000
-
-#
-# Ralink RT305x
-#
-core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/
-cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
-load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000
-
-#
-# Ralink RT3883
-#
-core-$(CONFIG_RALINK_RT3883) += arch/mips/ralink/rt3883/
-cflags-$(CONFIG_RALINK_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
-load-$(CONFIG_RALINK_RT3883) += 0xffffffff80000000
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile
deleted file mode 100644
index adab85f689..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the Ralink common stuff
-#
-# Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-
-obj-y := prom.o setup.o intc.o gpio.o
-
-obj-$(CONFIG_RALINK_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
-obj-$(CONFIG_RALINK_DEV_GPIO_LEDS) += dev-gpio-leds.o
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c
deleted file mode 100644
index 75a2a17143..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Ralink SoC GPIO button support
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "linux/init.h"
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-
-void __init ramips_register_gpio_buttons(int id,
- unsigned poll_interval,
- unsigned nbuttons,
- struct gpio_keys_button *buttons)
-{
- struct platform_device *pdev;
- struct gpio_keys_platform_data pdata;
- struct gpio_keys_button *p;
- int err;
-
- p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- memcpy(p, buttons, nbuttons * sizeof(*p));
-
- pdev = platform_device_alloc("gpio-keys-polled", id);
- if (!pdev)
- goto err_free_buttons;
-
- memset(&pdata, 0, sizeof(pdata));
- pdata.poll_interval = poll_interval;
- pdata.nbuttons = nbuttons;
- pdata.buttons = p;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put_pdev;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put_pdev;
-
- return;
-
-err_put_pdev:
- platform_device_put(pdev);
-
-err_free_buttons:
- kfree(p);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c
deleted file mode 100644
index a45a7cb779..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Ralink SoC GPIO LED device support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/mach-ralink/dev-gpio-leds.h>
-
-void __init ramips_register_gpio_leds(int id, unsigned num_leds,
- struct gpio_led *leds)
-{
- struct platform_device *pdev;
- struct gpio_led_platform_data pdata;
- struct gpio_led *p;
- int err;
-
- p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- memcpy(p, leds, num_leds * sizeof(*p));
-
- pdev = platform_device_alloc("leds-gpio", id);
- if (!pdev)
- goto err_free_leds;
-
- memset(&pdata, 0, sizeof(pdata));
- pdata.num_leds = num_leds;
- pdata.leds = p;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put_pdev;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put_pdev;
-
- return;
-
-err_put_pdev:
- platform_device_put(pdev);
-
-err_free_leds:
- kfree(p);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c
deleted file mode 100644
index f03d145b6d..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Ralink SoC specific GPIO support
- *
- * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/mach-ralink/ramips_gpio.h>
-
-static inline struct ramips_gpio_chip *to_ramips_gpio(struct gpio_chip *chip)
-{
- struct ramips_gpio_chip *rg;
-
- rg = container_of(chip, struct ramips_gpio_chip, chip);
- return rg;
-}
-
-static inline void ramips_gpio_wr(struct ramips_gpio_chip *rg, u8 reg, u32 val)
-{
- __raw_writel(val, rg->regs_base + rg->regs[reg]);
-}
-
-static inline u32 ramips_gpio_rr(struct ramips_gpio_chip *rg, u8 reg)
-{
- return __raw_readl(rg->regs_base + rg->regs[reg]);
-}
-
-static int ramips_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct ramips_gpio_chip *rg = to_ramips_gpio(chip);
- unsigned long flags;
- u32 t;
-
- spin_lock_irqsave(&rg->lock, flags);
- t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR);
- t &= ~(1 << offset);
- ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t);
- spin_unlock_irqrestore(&rg->lock, flags);
-
- return 0;
-}
-
-static int ramips_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct ramips_gpio_chip *rg = to_ramips_gpio(chip);
- unsigned long flags;
- u32 reg;
- u32 t;
-
- reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET;
-
- spin_lock_irqsave(&rg->lock, flags);
- ramips_gpio_wr(rg, reg, 1 << offset);
-
- t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR);
- t |= 1 << offset;
- ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t);
- spin_unlock_irqrestore(&rg->lock, flags);
-
- return 0;
-}
-
-static void ramips_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct ramips_gpio_chip *rg = to_ramips_gpio(chip);
- u32 reg;
-
- reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET;
- ramips_gpio_wr(rg, reg, 1 << offset);
-}
-
-static int ramips_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct ramips_gpio_chip *rg = to_ramips_gpio(chip);
- u32 t;
-
- t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DATA);
- return !!(t & (1 << offset));
-}
-
-static __init void ramips_gpio_chip_add(struct ramips_gpio_chip *rg)
-{
- spin_lock_init(&rg->lock);
-
- rg->regs_base = ioremap(rg->map_base, rg->map_size);
-
- rg->chip.direction_input = ramips_gpio_direction_input;
- rg->chip.direction_output = ramips_gpio_direction_output;
- rg->chip.get = ramips_gpio_get;
- rg->chip.set = ramips_gpio_set;
-
- /* set polarity to low for all lines */
- ramips_gpio_wr(rg, RAMIPS_GPIO_REG_POL, 0);
-
- gpiochip_add(&rg->chip);
-}
-
-__init int ramips_gpio_init(struct ramips_gpio_data *data)
-{
- int i;
-
- for (i = 0; i < data->num_chips; i++)
- ramips_gpio_chip_add(&data->chips[i]);
-
- return 0;
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c
deleted file mode 100644
index 65e42b423b..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Ralink SoC Interrupt controller routines
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-ralink/common.h>
-
-/* INTC register offsets */
-#define INTC_REG_STATUS0 0x00
-#define INTC_REG_STATUS1 0x04
-#define INTC_REG_TYPE 0x20
-#define INTC_REG_RAW_STATUS 0x30
-#define INTC_REG_ENABLE 0x34
-#define INTC_REG_DISABLE 0x38
-
-#define INTC_INT_GLOBAL BIT(31)
-#define INTC_IRQ_COUNT 32
-
-static unsigned int ramips_intc_irq_base;
-static void __iomem *ramips_intc_base;
-
-static inline void ramips_intc_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, ramips_intc_base + reg);
-}
-
-static inline u32 ramips_intc_rr(unsigned reg)
-{
- return __raw_readl(ramips_intc_base + reg);
-}
-
-static void ramips_intc_irq_unmask(struct irq_data *d)
-{
- unsigned int irq = d->irq - ramips_intc_irq_base;
-
- ramips_intc_wr((1 << irq), INTC_REG_ENABLE);
-}
-
-static void ramips_intc_irq_mask(struct irq_data *d)
-{
- unsigned int irq = d->irq - ramips_intc_irq_base;
-
- ramips_intc_wr((1 << irq), INTC_REG_DISABLE);
-}
-
-static struct irq_chip ramips_intc_irq_chip = {
- .name = "INTC",
- .irq_unmask = ramips_intc_irq_unmask,
- .irq_mask = ramips_intc_irq_mask,
- .irq_mask_ack = ramips_intc_irq_mask,
-};
-
-static struct irqaction ramips_intc_irqaction = {
- .handler = no_action,
- .name = "cascade [INTC]",
-};
-
-void __init ramips_intc_irq_init(unsigned intc_base, unsigned irq,
- unsigned irq_base)
-{
- int i;
-
- ramips_intc_base = ioremap_nocache(intc_base, PAGE_SIZE);
- ramips_intc_irq_base = irq_base;
-
- /* disable all interrupts */
- ramips_intc_wr(~0, INTC_REG_DISABLE);
-
- /* route all INTC interrupts to MIPS HW0 interrupt */
- ramips_intc_wr(0, INTC_REG_TYPE);
-
- for (i = ramips_intc_irq_base;
- i < ramips_intc_irq_base + INTC_IRQ_COUNT; i++)
- irq_set_chip_and_handler(i, &ramips_intc_irq_chip,
- handle_level_irq);
-
- setup_irq(irq, &ramips_intc_irqaction);
- ramips_intc_wr(INTC_INT_GLOBAL, INTC_REG_ENABLE);
-}
-
-u32 ramips_intc_get_status(void)
-{
- return ramips_intc_rr(INTC_REG_STATUS0);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c
deleted file mode 100644
index 26169d366d..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Ralink SoC specific prom routines
- *
- * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/machine.h>
-
-unsigned long ramips_mem_base;
-unsigned long ramips_mem_size_min;
-unsigned long ramips_mem_size_max;
-
-static inline void *to_ram_addr(void *addr)
-{
- u32 base;
-
- base = KSEG0ADDR(ramips_mem_base);
- if (((u32) addr > base) &&
- ((u32) addr < (base + ramips_mem_size_max)))
- return addr;
-
- base = KSEG1ADDR(ramips_mem_base);
- if (((u32) addr > base) &&
- ((u32) addr < (base + ramips_mem_size_max)))
- return addr;
-
- /* some U-Boot variants uses physical addresses */
- base = ramips_mem_base;
- if (((u32) addr > base) &&
- ((u32) addr < (base + ramips_mem_size_max)))
- return (void *)KSEG0ADDR(addr);
-
- return NULL;
-}
-
-static char ramips_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
-static void __init prom_append_cmdline(const char *name,
- const char *value)
-{
- snprintf(ramips_cmdline_buf, sizeof(ramips_cmdline_buf),
- " %s=%s", name, value);
- strlcat(arcs_cmdline, ramips_cmdline_buf, sizeof(arcs_cmdline));
-}
-
-#ifdef CONFIG_IMAGE_CMDLINE_HACK
-extern char __image_cmdline[];
-
-static int __init use_image_cmdline(void)
-{
- char *p = __image_cmdline;
- int replace = 0;
-
- if (*p == '-') {
- replace = 1;
- p++;
- }
-
- if (*p == '\0')
- return 0;
-
- if (replace) {
- strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
- } else {
- strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
- strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
- }
-
- return 1;
-}
-#else
-static int inline use_image_cmdline(void) { return 0; }
-#endif
-
-static __init void prom_init_cmdline(int argc, char **argv)
-{
- int i;
-
- if (use_image_cmdline())
- return;
-
- if (!argv) {
- printk(KERN_DEBUG "argv=%p is invalid, skipping\n",
- argv);
- return;
- }
-
- for (i = 0; i < argc; i++) {
- char *p = to_ram_addr(argv[i]);
-
- if (!p) {
- printk(KERN_DEBUG
- "argv[%d]=%p is invalid, skipping\n",
- i, argv[i]);
- continue;
- }
-
- printk(KERN_DEBUG "argv[%d]: %s\n", i, p);
- strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
- strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
- }
-}
-
-static __init char *prom_append_env(char **env, const char *envname)
-{
-#define PROM_MAX_ENVS 256
- int len = strlen(envname);
- int i;
-
- if (!env) {
- printk(KERN_DEBUG "env=%p is not in RAM, skipping\n",
- env);
- return NULL;
- }
-
- for (i = 0; i < PROM_MAX_ENVS; i++) {
- char *p = to_ram_addr(env[i]);
-
- if (!p)
- break;
-
- printk(KERN_DEBUG "env[%d]: %s\n", i, p);
- if (strncmp(envname, p, len) == 0 && p[len] == '=')
- prom_append_cmdline(envname, p + len + 1);
- }
-
- return NULL;
-#undef PROM_MAX_ENVS
-}
-
-void __init prom_init(void)
-{
- int argc;
- char **envp;
- char **argv;
-
- ramips_soc_prom_init();
-
- printk(KERN_DEBUG
- "prom: fw_arg0=%08x, fw_arg1=%08x, fw_arg2=%08x, fw_arg3=%08x\n",
- (unsigned int)fw_arg0, (unsigned int)fw_arg1,
- (unsigned int)fw_arg2, (unsigned int)fw_arg3);
-
- argc = fw_arg0;
- argv = to_ram_addr((void *)fw_arg1);
- prom_init_cmdline(argc, argv);
-
- envp = to_ram_addr((void *)fw_arg2);
- prom_append_env(envp, "board");
- prom_append_env(envp, "ethaddr");
-}
-
-void __init prom_free_prom_memory(void)
-{
- /* We do not have to prom memory to free */
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c
deleted file mode 100644
index 1af855e649..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Ralink SoC common setup
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/machine.h>
-
-unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN];
-unsigned long (*ramips_get_mem_size)(void);
-
-const char *get_system_type(void)
-{
- return ramips_sys_type;
-}
-
-static void __init detect_mem_size(void)
-{
- unsigned long size;
-
- if (ramips_get_mem_size) {
- size = ramips_get_mem_size();
- } else {
- void *base;
-
- base = (void *) KSEG1ADDR(detect_mem_size);
- for (size = ramips_mem_size_min; size < ramips_mem_size_max;
- size <<= 1 ) {
- if (!memcmp(base, base + size, 1024))
- break;
- }
- }
-
- add_memory_region(ramips_mem_base, size, BOOT_MEM_RAM);
-}
-
-void __init ramips_early_serial_setup(int line, unsigned base, unsigned freq,
- unsigned irq)
-{
- struct uart_port p;
- int err;
-
- memset(&p, 0, sizeof(p));
- p.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
- p.iotype = UPIO_AU;
- p.uartclk = freq;
- p.regshift = 2;
- p.type = PORT_16550A;
-
- p.mapbase = base;
- p.membase = ioremap_nocache(p.mapbase, PAGE_SIZE);
- p.line = line;
- p.irq = irq;
-
- err = early_serial_setup(&p);
- if (err)
- printk(KERN_ERR "early serial%d registration failed %d\n",
- line, err);
-}
-
-void __init plat_mem_setup(void)
-{
- set_io_port_base(KSEG1);
-
- detect_mem_size();
- ramips_soc_setup();
-}
-
-__setup("board=", mips_machtype_setup);
-
-static int __init ramips_machine_setup(void)
-{
- mips_machine_setup();
- return 0;
-}
-
-arch_initcall(ramips_machine_setup);
-
-static void __init ramips_generic_init(void)
-{
-}
-
-MIPS_MACHINE(RAMIPS_MACH_GENERIC, "Generic", "Generic Ralink board",
- ramips_generic_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig
deleted file mode 100644
index 739561c640..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-if RALINK_RT288X
-
-menu "Ralink RT288x machine selection"
-
-config RT288X_MACH_F5D8235_V1
- bool "Belkin F5D8235 V1 board support"
- select RALINK_DEV_GPIO_LEDS
-
-config RT288X_MACH_BR6524N
- bool "Edimax BR6524N support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT288X_MACH_RT_N15
- bool "Asus RT-N15 board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT288X_MACH_V11ST_FE
- bool "Ralink V11ST-FE board support"
- select HW_HAS_PCI
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT288X_MACH_WLI_TX4_AG300N
- bool "Buffalo WLI-TX4-AG300N board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT288X_MACH_WZR_AGL300NH
- bool "Buffalo WZR-AGL300NH board support"
- select RALINK_DEV_GPIO_LEDS
-
-endmenu
-
-endif
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile
deleted file mode 100644
index eb60c5d10d..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the Ralink RT288x SoC specific parts of the kernel
-#
-# Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
-# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
-# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-
-obj-y := irq.o setup.o rt288x.o devices.o clock.o
-
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o
-obj-$(CONFIG_RT288X_MACH_BR6524N) += mach-br6524n.o
-obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o
-obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o
-obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
-obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c
deleted file mode 100644
index 36d754dbf6..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Ralink RT288X clock API
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include "common.h"
-
-struct clk {
- unsigned long rate;
-};
-
-static struct clk rt288x_cpu_clk;
-static struct clk rt288x_sys_clk;
-static struct clk rt288x_wdt_clk;
-static struct clk rt288x_uart_clk;
-
-void __init rt288x_clocks_init(void)
-{
- u32 t;
-
- t = rt288x_sysc_rr(SYSC_REG_SYSTEM_CONFIG);
- t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
-
- switch (t) {
- case SYSTEM_CONFIG_CPUCLK_250:
- rt288x_cpu_clk.rate = 250000000;
- break;
- case SYSTEM_CONFIG_CPUCLK_266:
- rt288x_cpu_clk.rate = 266666667;
- break;
- case SYSTEM_CONFIG_CPUCLK_280:
- rt288x_cpu_clk.rate = 280000000;
- break;
- case SYSTEM_CONFIG_CPUCLK_300:
- rt288x_cpu_clk.rate = 300000000;
- break;
- }
-
- rt288x_sys_clk.rate = rt288x_cpu_clk.rate / 2;
- rt288x_uart_clk.rate = rt288x_sys_clk.rate;
- rt288x_wdt_clk.rate = rt288x_sys_clk.rate;
-}
-
-/*
- * Linux clock API
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "sys"))
- return &rt288x_sys_clk;
-
- if (!strcmp(id, "cpu"))
- return &rt288x_cpu_clk;
-
- if (!strcmp(id, "wdt"))
- return &rt288x_wdt_clk;
-
- if (!strcmp(id, "uart"))
- return &rt288x_uart_clk;
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h
deleted file mode 100644
index f2415c58ba..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Ralink RT288X SoC common defines
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT288X_COMMON_H
-#define _RT288X_COMMON_H
-
-void rt288x_clocks_init(void);
-
-#endif /* _RT288X_COMMON_H */ \ No newline at end of file
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c
deleted file mode 100644
index 196810a30f..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Ralink RT288x SoC platform device registration
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/etherdevice.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/rt2x00_platform.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-static struct resource rt288x_flash0_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = KSEG1ADDR(RT2880_FLASH0_BASE),
- .end = KSEG1ADDR(RT2880_FLASH0_BASE) +
- RT2880_FLASH0_SIZE - 1,
- },
-};
-
-struct physmap_flash_data rt288x_flash0_data;
-static struct platform_device rt288x_flash0_device = {
- .name = "physmap-flash",
- .resource = rt288x_flash0_resources,
- .num_resources = ARRAY_SIZE(rt288x_flash0_resources),
- .dev = {
- .platform_data = &rt288x_flash0_data,
- },
-};
-
-static struct resource rt288x_flash1_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = KSEG1ADDR(RT2880_FLASH1_BASE),
- .end = KSEG1ADDR(RT2880_FLASH1_BASE) +
- RT2880_FLASH1_SIZE - 1,
- },
-};
-
-struct physmap_flash_data rt288x_flash1_data;
-static struct platform_device rt288x_flash1_device = {
- .name = "physmap-flash",
- .resource = rt288x_flash1_resources,
- .num_resources = ARRAY_SIZE(rt288x_flash1_resources),
- .dev = {
- .platform_data = &rt288x_flash1_data,
- },
-};
-
-static int rt288x_flash_instance __initdata;
-void __init rt288x_register_flash(unsigned int id)
-{
- struct platform_device *pdev;
- struct physmap_flash_data *pdata;
- u32 t;
- int reg;
-
- switch (id) {
- case 0:
- pdev = &rt288x_flash0_device;
- reg = MEMC_REG_FLASH_CFG0;
- break;
- case 1:
- pdev = &rt288x_flash1_device;
- reg = MEMC_REG_FLASH_CFG1;
- break;
- default:
- return;
- }
-
- t = rt288x_memc_rr(reg);
- t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK;
-
- pdata = pdev->dev.platform_data;
- switch (t) {
- case FLASH_CFG_WIDTH_8BIT:
- pdata->width = 1;
- break;
- case FLASH_CFG_WIDTH_16BIT:
- pdata->width = 2;
- break;
- case FLASH_CFG_WIDTH_32BIT:
- pdata->width = 4;
- break;
- default:
- printk(KERN_ERR "RT288x: flash bank%u witdh is invalid\n", id);
- return;
- }
-
- pdev->id = rt288x_flash_instance;
-
- platform_device_register(pdev);
- rt288x_flash_instance++;
-}
-
-static struct resource rt288x_wifi_resources[] = {
- {
- .start = RT2880_WMAC_BASE,
- .end = RT2880_WMAC_BASE + 0x3FFFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT288X_CPU_IRQ_WNIC,
- .end = RT288X_CPU_IRQ_WNIC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct rt2x00_platform_data rt288x_wifi_data;
-static struct platform_device rt288x_wifi_device = {
- .name = "rt2800_wmac",
- .resource = rt288x_wifi_resources,
- .num_resources = ARRAY_SIZE(rt288x_wifi_resources),
- .dev = {
- .platform_data = &rt288x_wifi_data,
- }
-};
-
-void __init rt288x_register_wifi(void)
-{
- rt288x_wifi_data.eeprom_file_name = "soc_wmac.eeprom";
- platform_device_register(&rt288x_wifi_device);
-}
-
-static void rt288x_fe_reset(void)
-{
- rt288x_sysc_wr(RT2880_RESET_FE, SYSC_REG_RESET_CTRL);
-}
-
-static struct resource rt288x_eth_resources[] = {
- {
- .start = RT2880_FE_BASE,
- .end = RT2880_FE_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT288X_CPU_IRQ_FE,
- .end = RT288X_CPU_IRQ_FE,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct ramips_eth_platform_data rt288x_eth_data;
-static struct platform_device rt288x_eth_device = {
- .name = "ramips_eth",
- .resource = rt288x_eth_resources,
- .num_resources = ARRAY_SIZE(rt288x_eth_resources),
- .dev = {
- .platform_data = &rt288x_eth_data,
- }
-};
-
-void __init rt288x_register_ethernet(void)
-{
- struct clk *clk;
-
- clk = clk_get(NULL, "sys");
- if (IS_ERR(clk))
- panic("unable to get SYS clock, err=%ld", PTR_ERR(clk));
-
- rt288x_eth_data.sys_freq = clk_get_rate(clk);
- rt288x_eth_data.reset_fe = rt288x_fe_reset;
- rt288x_eth_data.min_pkt_len = 64;
-
- if (!is_valid_ether_addr(rt288x_eth_data.mac))
- random_ether_addr(rt288x_eth_data.mac);
-
- platform_device_register(&rt288x_eth_device);
-}
-
-static struct resource rt288x_wdt_resources[] = {
- {
- .start = RT2880_TIMER_BASE,
- .end = RT2880_TIMER_BASE + RT2880_TIMER_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rt288x_wdt_device = {
- .name = "ramips-wdt",
- .id = -1,
- .resource = rt288x_wdt_resources,
- .num_resources = ARRAY_SIZE(rt288x_wdt_resources),
-};
-
-void __init rt288x_register_wdt(void)
-{
- u32 t;
-
- /* enable WDT reset output on pin SRAM_CS_N */
- t = rt288x_sysc_rr(SYSC_REG_CLKCFG);
- t |= CLKCFG_SRAM_CS_N_WDT;
- rt288x_sysc_wr(t, SYSC_REG_CLKCFG);
-
- platform_device_register(&rt288x_wdt_device);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h
deleted file mode 100644
index d097e5d90e..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Ralink RT288x SoC specific platform definitions
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_RT288X_PLATFORM_H
-#define __ASM_MACH_RT288X_PLATFORM_H
-
-struct physmap_flash_data;
-
-extern struct physmap_flash_data rt288x_flash0_data;
-extern struct physmap_flash_data rt288x_flash1_data;
-void rt288x_register_flash(unsigned int id);
-
-void rt288x_register_wifi(void);
-
-extern struct ramips_eth_platform_data rt288x_eth_data;
-void rt288x_register_ethernet(void);
-
-void rt288x_register_wdt(void);
-
-#endif /* __ASM_MACH_RT288X_PLATFORM_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c
deleted file mode 100644
index 9fd7adb543..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Ralink RT288x SoC early printk support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/serial_reg.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/rt288x_regs.h>
-
-#define UART_READ(r) \
- __raw_readl((void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r)))
-
-#define UART_WRITE(r, v) \
- __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r)))
-
-void prom_putchar(unsigned char ch)
-{
- while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0);
- UART_WRITE(UART_REG_TX, ch);
- while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c
deleted file mode 100644
index 5465a4560d..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Ralink RT288x SoC specific interrupt handling
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-
-static void rt288x_intc_irq_dispatch(void)
-{
- u32 pending;
-
- pending = ramips_intc_get_status();
-
- if (pending & RT2880_INTC_INT_TIMER0)
- do_IRQ(RT2880_INTC_IRQ_TIMER0);
-
- else if (pending & RT2880_INTC_INT_TIMER1)
- do_IRQ(RT2880_INTC_IRQ_TIMER1);
-
- else if (pending & RT2880_INTC_INT_UART0)
- do_IRQ(RT2880_INTC_IRQ_UART0);
-
- else if (pending & RT2880_INTC_INT_PCM)
- do_IRQ(RT2880_INTC_IRQ_PCM);
-
- else if (pending & RT2880_INTC_INT_UART1)
- do_IRQ(RT2880_INTC_IRQ_UART1);
-
- /* TODO: handle PIO interrupts as well */
-
- else
- spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending;
-
- pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(RT288X_CPU_IRQ_COUNTER);
-
- else if (pending & STATUSF_IP4)
- do_IRQ(RT288X_CPU_IRQ_PCI);
-
- else if (pending & STATUSF_IP5)
- do_IRQ(RT288X_CPU_IRQ_FE);
-
- else if (pending & STATUSF_IP6)
- do_IRQ(RT288X_CPU_IRQ_WNIC);
-
- else if (pending & STATUSF_IP2)
- rt288x_intc_irq_dispatch();
-
- else
- spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
- ramips_intc_irq_init(RT2880_INTC_BASE, RT288X_CPU_IRQ_INTC,
- RT288X_INTC_IRQ_BASE);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c
deleted file mode 100644
index ff4746cda5..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Edimax BR6524N board support
- *
- * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define BR6524N_GPIO_STATUS_LED 12
-#define BR6524N_GPIO_BUTTON_WPS 0
-
-#define BR6524N_KEYS_POLL_INTERVAL 20
-#define BR6524N_KEYS_DEBOUNCE_INTERVAL (3 * BR6524N_KEYS_POLL_INTERVAL)
-
-static struct gpio_led br6524n_leds_gpio[] __initdata = {
- {
- .name = "br6524n:green:status",
- .gpio = BR6524N_GPIO_STATUS_LED,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button br6524n_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = BR6524N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BR6524N_GPIO_BUTTON_WPS,
- }
-};
-
-static void __init br6524n_fe_init(void)
-{
- rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
-
- rt288x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(br6524n_leds_gpio),
- br6524n_leds_gpio);
-
- ramips_register_gpio_buttons(-1, BR6524N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(br6524n_gpio_buttons),
- br6524n_gpio_buttons);
-
- rt288x_register_wifi();
-
- /* Board is connected to an IC+ IP175C Fast Ethernet switch */
- rt288x_eth_data.speed = SPEED_100;
- rt288x_eth_data.duplex = DUPLEX_FULL;
- rt288x_eth_data.tx_fc = 1;
- rt288x_eth_data.rx_fc = 1;
- rt288x_eth_data.phy_mask = BIT(0);
- rt288x_register_ethernet();
-
- rt288x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_BR6524N, "BR6524N", "Edimax BR6524N", br6524n_fe_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
deleted file mode 100644
index 7679572bb5..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Belkin F5D825 V1 board support
- *
- * Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-
-#include "devices.h"
-
-#include <linux/rtl8366.h>
-#include <linux/ethtool.h>
-
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#define F5D8235_GPIO_RTL8366_SCK 2
-#define F5D8235_GPIO_RTL8366_SDA 1
-
-#define F5D8235_GPIO_LED_USB_BLUE 7
-#define F5D8235_GPIO_LED_USB_ORANGE 8
-#define F5D8235_GPIO_BUTTON_WPS 0
-#define F5D8235_GPIO_BUTTON_RESET 9
-
-#define F5D8235_KEYS_POLL_INTERVAL 20
-#define F5D8235_KEYS_DEBOUNCE_INTERVAL (3 * F5D8235_KEYS_POLL_INTERVAL)
-
-static struct rtl8366_platform_data f5d8235_rtl8366s_data = {
- .gpio_sda = F5D8235_GPIO_RTL8366_SDA,
- .gpio_sck = F5D8235_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device f5d8235_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &f5d8235_rtl8366s_data,
- }
-};
-
-static struct gpio_led f5d8235_leds_gpio[] __initdata = {
- {
- .name = "f5d8235-v1:blue:storage",
- .gpio = F5D8235_GPIO_LED_USB_BLUE,
- .active_low = 1,
- },{
- .name = "f5d8235-v1:orange:storage",
- .gpio = F5D8235_GPIO_LED_USB_ORANGE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button f5d8235_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL,
- .gpio = F5D8235_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL,
- .gpio = F5D8235_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init f5d8235_init(void)
-{
- rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
-
- rt288x_register_flash(0);
- rt288x_register_wifi();
- rt288x_register_wdt();
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio),
- f5d8235_leds_gpio);
-
- ramips_register_gpio_buttons(-1, F5D8235_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(f5d8235_gpio_buttons),
- f5d8235_gpio_buttons);
-
- platform_device_register(&f5d8235_rtl8366s_device);
-
- rt288x_eth_data.speed = SPEED_1000;
- rt288x_eth_data.duplex = DUPLEX_FULL;
- rt288x_eth_data.tx_fc = 1;
- rt288x_eth_data.rx_fc = 1;
- rt288x_register_ethernet();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1",
- "Belkin F5D8235 v1", f5d8235_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c
deleted file mode 100644
index 1085b82f91..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Asus RT-N15 board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-#include <linux/ethtool.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define RT_N15_GPIO_LED_POWER 11
-#define RT_N15_GPIO_BUTTON_WPS 0
-#define RT_N15_GPIO_BUTTON_RESET 12
-
-#define RT_N15_GPIO_RTL8366_SCK 2
-#define RT_N15_GPIO_RTL8366_SDA 1
-
-#define RT_N15_KEYS_POLL_INTERVAL 20
-#define RT_N15_KEYS_DEBOUNCE_INTERVAL (3 * RT_N15_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rt_n15_leds_gpio[] __initdata = {
- {
- .name = "rt-n15:blue:power",
- .gpio = RT_N15_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button rt_n15_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_N15_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_N15_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_platform_data rt_n15_rtl8366s_data = {
- .gpio_sda = RT_N15_GPIO_RTL8366_SDA,
- .gpio_sck = RT_N15_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device rt_n15_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &rt_n15_rtl8366s_data,
- }
-};
-
-static void __init rt_n15_init(void)
-{
- rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
-
- rt288x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio),
- rt_n15_leds_gpio);
-
- ramips_register_gpio_buttons(-1, RT_N15_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rt_n15_gpio_buttons),
- rt_n15_gpio_buttons);
-
- platform_device_register(&rt_n15_rtl8366s_device);
-
- rt288x_register_wifi();
-
- rt288x_eth_data.speed = SPEED_1000;
- rt288x_eth_data.duplex = DUPLEX_FULL;
- rt288x_eth_data.tx_fc = 1;
- rt288x_eth_data.rx_fc = 1;
- rt288x_register_ethernet();
- rt288x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_RT_N15, "RT-N15", "Asus RT-N15", rt_n15_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c
deleted file mode 100644
index 667fe92dc0..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Ralink V11ST-FE board support
- *
- * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define V11ST_FE_GPIO_STATUS_LED 12
-#define V11ST_FE_GPIO_BUTTON_WPS 0
-
-#define V11ST_FE_KEYS_POLL_INTERVAL 20
-#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL (3 * V11ST_FE_KEYS_POLL_INTERVAL)
-
-static struct gpio_led v11st_fe_leds_gpio[] __initdata = {
- {
- .name = "v11st-fe:green:status",
- .gpio = V11ST_FE_GPIO_STATUS_LED,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL,
- .gpio = V11ST_FE_GPIO_BUTTON_WPS,
- }
-};
-
-static void __init rt_v11st_fe_init(void)
-{
- rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
-
- rt288x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio),
- v11st_fe_leds_gpio);
-
- ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(v11st_fe_gpio_buttons),
- v11st_fe_gpio_buttons);
-
- rt288x_register_wifi();
-
- /* Board is connected to an IC+ IP175C Fast Ethernet switch */
- rt288x_eth_data.speed = SPEED_100;
- rt288x_eth_data.duplex = DUPLEX_FULL;
- rt288x_eth_data.tx_fc = 1;
- rt288x_eth_data.rx_fc = 1;
- rt288x_eth_data.phy_mask = BIT(0);
- rt288x_register_ethernet();
-
- rt288x_register_wdt();
- rt288x_register_pci();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c
deleted file mode 100644
index 02fac0b3c5..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Buffalo WLI-TX4-AG300N board support
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/ethtool.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define WLI_TX4_AG300N_GPIO_LED_DIAG 10
-#define WLI_TX4_AG300N_GPIO_LED_POWER 12
-#define WLI_TX4_AG300N_GPIO_LED_SECURITY 13
-
-#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS 0
-#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH 8
-#define WLI_TX4_AG300N_GPIO_BUTTON_RESET 9
-
-#define WLI_TX4_AG300N_KEYS_POLL_INTERVAL 20
-#define WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLI_TX4_AG300N_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = {
- {
- .name = "buffalo:blue:power",
- .gpio = WLI_TX4_AG300N_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "buffalo:red:diag",
- .gpio = WLI_TX4_AG300N_GPIO_LED_DIAG,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:security",
- .gpio = WLI_TX4_AG300N_GPIO_LED_SECURITY,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button wli_tx4_ag300n_gpio_buttons[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WLI_TX4_AG300N_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "AOSS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WLI_TX4_AG300N_GPIO_BUTTON_AOSS,
- .active_low = 1,
- },
- {
- .desc = "Bandwidth switch",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH,
- .active_low = 0,
- },
-};
-
-static void __init wli_tx4_ag300n_init(void)
-{
- rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio),
- wli_tx4_ag300n_leds_gpio);
- ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons),
- wli_tx4_ag300n_gpio_buttons);
-
- rt288x_register_flash(0);
- rt288x_register_wifi();
- rt288x_register_wdt();
-
- rt288x_eth_data.speed = SPEED_100;
- rt288x_eth_data.duplex = DUPLEX_FULL;
- rt288x_eth_data.tx_fc = 1;
- rt288x_eth_data.rx_fc = 1;
- rt288x_register_ethernet();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N",
- "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c
deleted file mode 100644
index 6bd7a45423..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Buffalo WZR-AGL300NH board support
- *
- * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-
-#include "devices.h"
-
-/*
- * MTD layout from stock firmware:
- * mtd0: 00030000 00010000 "uboot"
- * mtd1: 00010000 00010000 "uboot_environ"
- * mtd2: 00010000 00010000 "factory_default"
- * mtd3: 000b0000 00010000 "linux"
- * mtd4: 002f0000 00010000 "rootfs"
- * mtd5: 00010000 00010000 "user_property"
- */
-
-static struct mtd_partition wzr_agl300nh_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "uboot_environ",
- .offset = 0x030000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "factory_default",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "linux",
- .offset = 0x050000,
- .size = 0x0b0000,
- }, {
- .name = "rootfs",
- .offset = 0x100000,
- .size = 0x2f0000,
- }, {
- .name = "user_property",
- .offset = 0x3f0000,
- .size = 0x010000,
- }
-};
-
-static void __init wzr_agl300nh_init(void)
-{
- rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
-
- rt288x_flash0_data.nr_parts = ARRAY_SIZE(wzr_agl300nh_partitions);
- rt288x_flash0_data.parts = wzr_agl300nh_partitions;
- rt288x_register_flash(0);
-
- rt288x_register_wifi();
- rt288x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WZR_AGL300NH, "WZR-AGL300NH",
- "Buffalo WZR-AGL300NH", wzr_agl300nh_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c
deleted file mode 100644
index c51ad98b3a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Ralink RT288x SoC specific setup
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/ramips_gpio.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-
-void __iomem * rt288x_sysc_base;
-void __iomem * rt288x_memc_base;
-
-void __init ramips_soc_prom_init(void)
-{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
- u32 n0;
- u32 n1;
- u32 id;
-
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
- id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
-
- snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN,
- "Ralink %c%c%c%c%c%c%c%c id:%u rev:%u",
- (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff),
- (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff),
- (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff),
- (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff),
- (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
- (id & CHIP_ID_REV_MASK));
-
- ramips_mem_base = RT2880_SDRAM_BASE;
- ramips_mem_size_min = RT288X_MEM_SIZE_MIN;
- ramips_mem_size_max = RT288X_MEM_SIZE_MAX;
-}
-
-static struct ramips_gpio_chip rt288x_gpio_chips[] = {
- {
- .chip = {
- .label = "RT288X-GPIO0",
- .base = 0,
- .ngpio = 24,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x00,
- [RAMIPS_GPIO_REG_EDGE] = 0x04,
- [RAMIPS_GPIO_REG_RENA] = 0x08,
- [RAMIPS_GPIO_REG_FENA] = 0x0c,
- [RAMIPS_GPIO_REG_DATA] = 0x20,
- [RAMIPS_GPIO_REG_DIR] = 0x24,
- [RAMIPS_GPIO_REG_POL] = 0x28,
- [RAMIPS_GPIO_REG_SET] = 0x2c,
- [RAMIPS_GPIO_REG_RESET] = 0x30,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x34,
- },
- .map_base = RT2880_PIO_BASE,
- .map_size = RT2880_PIO_SIZE,
- },
- {
- .chip = {
- .label = "RT288X-GPIO1",
- .base = 24,
- .ngpio = 16,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x38,
- [RAMIPS_GPIO_REG_EDGE] = 0x3c,
- [RAMIPS_GPIO_REG_RENA] = 0x40,
- [RAMIPS_GPIO_REG_FENA] = 0x44,
- [RAMIPS_GPIO_REG_DATA] = 0x48,
- [RAMIPS_GPIO_REG_DIR] = 0x4c,
- [RAMIPS_GPIO_REG_POL] = 0x50,
- [RAMIPS_GPIO_REG_SET] = 0x54,
- [RAMIPS_GPIO_REG_RESET] = 0x58,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x5c,
- },
- .map_base = RT2880_PIO_BASE,
- .map_size = RT2880_PIO_SIZE,
- },
- {
- .chip = {
- .label = "RT288X-GPIO2",
- .base = 40,
- .ngpio = 32,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x60,
- [RAMIPS_GPIO_REG_EDGE] = 0x64,
- [RAMIPS_GPIO_REG_RENA] = 0x68,
- [RAMIPS_GPIO_REG_FENA] = 0x6c,
- [RAMIPS_GPIO_REG_DATA] = 0x70,
- [RAMIPS_GPIO_REG_DIR] = 0x74,
- [RAMIPS_GPIO_REG_POL] = 0x78,
- [RAMIPS_GPIO_REG_SET] = 0x7c,
- [RAMIPS_GPIO_REG_RESET] = 0x80,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x84,
- },
- .map_base = RT2880_PIO_BASE,
- .map_size = RT2880_PIO_SIZE,
- },
-};
-
-static struct ramips_gpio_data rt288x_gpio_data = {
- .chips = rt288x_gpio_chips,
- .num_chips = ARRAY_SIZE(rt288x_gpio_chips),
-};
-
-static void rt288x_gpio_reserve(int first, int last)
-{
- for (; first <= last; first++)
- gpio_request(first, "reserved");
-}
-
-void __init rt288x_gpio_init(u32 mode)
-{
- rt288x_sysc_wr(mode, SYSC_REG_GPIO_MODE);
-
- ramips_gpio_init(&rt288x_gpio_data);
- if ((mode & RT2880_GPIO_MODE_I2C) == 0)
- rt288x_gpio_reserve(1, 2);
-
- if ((mode & RT2880_GPIO_MODE_SPI) == 0)
- rt288x_gpio_reserve(3, 6);
-
- if ((mode & RT2880_GPIO_MODE_UART0) == 0)
- rt288x_gpio_reserve(7, 14);
-
- if ((mode & RT2880_GPIO_MODE_JTAG) == 0)
- rt288x_gpio_reserve(17, 21);
-
- if ((mode & RT2880_GPIO_MODE_MDIO) == 0)
- rt288x_gpio_reserve(22, 23);
-
- if ((mode & RT2880_GPIO_MODE_SDRAM) == 0)
- rt288x_gpio_reserve(24, 39);
-
- if ((mode & RT2880_GPIO_MODE_PCI) == 0)
- rt288x_gpio_reserve(40, 71);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c
deleted file mode 100644
index be474b5292..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Ralink RT288x SoC specific setup
- *
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mips_machine.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include "common.h"
-
-static void rt288x_restart(char *command)
-{
- rt288x_sysc_wr(RT2880_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
- while (1)
- if (cpu_wait)
- cpu_wait();
-}
-
-static void rt288x_halt(void)
-{
- while (1)
- cpu_wait();
-}
-
-unsigned int __cpuinit get_c0_compare_irq(void)
-{
- return CP0_LEGACY_COMPARE_IRQ;
-}
-
-void __init ramips_soc_setup(void)
-{
- struct clk *clk;
-
- rt288x_sysc_base = ioremap_nocache(RT2880_SYSC_BASE, RT2880_SYSC_SIZE);
- rt288x_memc_base = ioremap_nocache(RT2880_MEMC_BASE, RT2880_MEMC_SIZE);
-
- rt288x_clocks_init();
-
- clk = clk_get(NULL, "cpu");
- if (IS_ERR(clk))
- panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
- printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
- clk_get_rate(clk) / 1000000,
- (clk_get_rate(clk) % 1000000) * 100 / 1000000);
-
- _machine_restart = rt288x_restart;
- _machine_halt = rt288x_halt;
- pm_power_off = rt288x_halt;
-
- clk = clk_get(NULL, "uart");
- if (IS_ERR(clk))
- panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
-
- ramips_early_serial_setup(0, RT2880_UART0_BASE, clk_get_rate(clk),
- RT2880_INTC_IRQ_UART0);
- ramips_early_serial_setup(1, RT2880_UART1_BASE, clk_get_rate(clk),
- RT2880_INTC_IRQ_UART1);
-}
-
-void __init plat_time_init(void)
-{
- struct clk *clk;
-
- clk = clk_get(NULL, "cpu");
- if (IS_ERR(clk))
- panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
- mips_hpt_frequency = clk_get_rate(clk) / 2;
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig
deleted file mode 100644
index 700a983388..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig
+++ /dev/null
@@ -1,219 +0,0 @@
-if RALINK_RT305X
-
-menu "Ralink RT350x machine selection"
-
-config RT305X_MACH_CARAMBOLA
- bool "8devices Carambola dev board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_3G_6200N
- bool "Edimax 3G-6200N board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_3G300M
- bool "Tenda 3G300M board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_BR6425
- bool "Edimax BR-6425 board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WR6202
- bool "Accton WR6202"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_AIR3GII
- bool "AirLive Air3GII board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_ALL0256N
- bool "Allnet ALL0256N support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_ALL5002
- bool "Allnet ALL5002 support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_W502U
- bool "ALFA Networks W502U board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_ARGUS_ATP52B
- bool "Argus ATP-52B support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_RT_G32_REVB
- bool "Asus RT-G32 revB board support"
- select RALINK_DEV_GPIO_BUTTONS
-
-config RT305X_MACH_RT_N10_PLUS
- bool "Asus RT-N10+ board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WL_330N
- bool "Asus WL-330N board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WL_330N3G
- bool "Asus WL-330N3G board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_HW550_3G
- bool "Aztech HW550-3G support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_F5D8235_V2
- bool "Belkin F5D8235 v2 support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WHR_G300N
- bool "Buffalo WHR-G300N support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_DIR_300_REVB
- bool "D-Link DIR-300 revB board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_DIR_615_H1
- bool "D-Link DIR-615 H1 board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_DAP_1350
- bool "D-Link DAP-1350 board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_ESR_9753
- bool "EnGenius ESR-9753 support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_BROADWAY
- bool "Hauppauge Broadway support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_FONERA20N
- bool "La Fonera20N board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_RT_N13U
- bool "ASUS RT-N13U board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_FREESTATION5
- bool "ARC FreeStation5"
-
-config RT305X_MACH_MOFI3500_3GN
- bool "MoFi Network MOFI3500-3GN support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WR512_3GN
- bool "SH-WR512NU/WS-WR512N1-like 3GN router"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_UR_326N4G
- bool "UR-326N4G Wireless N router"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_UR_336UN
- bool "UR-336UN Wireless N router"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_NW718
- bool "Netcore NW718"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_BC2
- bool "NexAira BC2"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_OMNI_EMB
- bool "Omnima MiniEMBWiFi"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_PSR_680W
- bool "Petatel PSR-680W Wireless 3G Router support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_PWH2004
- bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_V22RW_2X2
- bool "Ralink AP-RT3052-V22RW-2X2 board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_W306R_V20
- bool "Tenda W306R V2.0 board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WL341V3
- bool "Sitecom WL-341 v3 board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WL351
- bool "Sitecom WL-351 support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_SL_R7205
- bool "Skyline SL-R7205 Wireless 3G Router support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_WCR150GN
- bool "Sparklan WCR-150GN support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_NBG_419N
- bool "ZyXEL NBG-419N support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_MZKW300NH2
- bool "Planex MZK-W300NH2 Router support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT305X_MACH_XDX_RN502J
- bool "Unknown board XDX-RN502J"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-endmenu
-
-endif
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile
deleted file mode 100644
index 47e9ce52ba..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# Makefile for the Ralink RT305x SoC specific parts of the kernel
-#
-# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-
-obj-y := irq.o setup.o devices.o rt305x.o clock.o
-
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-obj-$(CONFIG_RT305X_MACH_3G_6200N) += mach-3g-6200n.o
-obj-$(CONFIG_RT305X_MACH_3G300M) += mach-3g300m.o
-obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
-obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o
-obj-$(CONFIG_RT305X_MACH_AIR3GII) += mach-air3gii.o
-obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o
-obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o
-obj-$(CONFIG_RT305X_MACH_BR6425) += mach-br6425.o
-obj-$(CONFIG_RT305X_MACH_BROADWAY) += mach-broadway.o
-obj-$(CONFIG_RT305X_MACH_CARAMBOLA) += mach-carambola.o
-obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
-obj-$(CONFIG_RT305X_MACH_DIR_615_H1) += mach-dir-615-h1.o
-obj-$(CONFIG_RT305X_MACH_DAP_1350) += mach-dap-1350.o
-obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o
-obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
-obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o
-obj-$(CONFIG_RT305X_MACH_RT_N13U) += mach-rt-n13u.o
-obj-$(CONFIG_RT305X_MACH_FREESTATION5) += mach-freestation5.o
-obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o
-obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o
-obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o
-obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
-obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o
-obj-$(CONFIG_RT305X_MACH_PSR_680W) += mach-psr-680w.o
-obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
-obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
-obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o
-obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o
-obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
-obj-$(CONFIG_RT305X_MACH_W306R_V20) += mach-w306r-v20.o
-obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o
-obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o
-obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o
-obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o
-obj-$(CONFIG_RT305X_MACH_UR_326N4G) += mach-ur-326n4g.o
-obj-$(CONFIG_RT305X_MACH_UR_336UN) += mach-ur-336un.o
-obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o
-obj-$(CONFIG_RT305X_MACH_WL_330N3G) += mach-wl-330n3g.o
-obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o
-obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o
-obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o
-obj-$(CONFIG_RT305X_MACH_MZKW300NH2) += mach-mzk-w300nh2.o
-obj-$(CONFIG_RT305X_MACH_XDX_RN502J) += mach-xdx-rn502j.o
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c
deleted file mode 100644
index c46a1747b5..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Ralink RT305X clock API
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-#include "common.h"
-
-struct clk {
- unsigned long rate;
-};
-
-static struct clk rt305x_cpu_clk;
-static struct clk rt305x_sys_clk;
-static struct clk rt305x_wdt_clk;
-static struct clk rt305x_uart_clk;
-
-void __init rt305x_clocks_init(void)
-{
- u32 t;
-
- t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG);
-
- if (soc_is_rt305x() || soc_is_rt3350()) {
- t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
- RT305X_SYSCFG_CPUCLK_MASK;
- switch (t) {
- case RT305X_SYSCFG_CPUCLK_LOW:
- rt305x_cpu_clk.rate = 320000000;
- break;
- case RT305X_SYSCFG_CPUCLK_HIGH:
- rt305x_cpu_clk.rate = 384000000;
- break;
- }
- rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3;
- rt305x_uart_clk.rate = rt305x_sys_clk.rate;
- rt305x_wdt_clk.rate = rt305x_sys_clk.rate;
- } else if (soc_is_rt3352()) {
- t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
- RT3352_SYSCFG0_CPUCLK_MASK;
- switch (t) {
- case RT3352_SYSCFG0_CPUCLK_LOW:
- rt305x_cpu_clk.rate = 384000000;
- break;
- case RT3352_SYSCFG0_CPUCLK_HIGH:
- rt305x_cpu_clk.rate = 400000000;
- break;
- }
- rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3;
- rt305x_uart_clk.rate = 40000000;
- rt305x_wdt_clk.rate = rt305x_sys_clk.rate;
- } else if (soc_is_rt5350()) {
- t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
- RT5350_SYSCFG0_CPUCLK_MASK;
- switch (t) {
- case RT5350_SYSCFG0_CPUCLK_360:
- rt305x_cpu_clk.rate = 360000000;
- rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3;
- break;
- case RT5350_SYSCFG0_CPUCLK_320:
- rt305x_cpu_clk.rate = 320000000;
- rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 4;
- break;
- case RT5350_SYSCFG0_CPUCLK_300:
- rt305x_cpu_clk.rate = 300000000;
- rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3;
- break;
- default:
- BUG();
- }
- rt305x_uart_clk.rate = 40000000;
- rt305x_wdt_clk.rate = rt305x_sys_clk.rate;
- } else {
- BUG();
- }
-
-}
-
-/*
- * Linux clock API
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "sys"))
- return &rt305x_sys_clk;
-
- if (!strcmp(id, "cpu"))
- return &rt305x_cpu_clk;
-
- if (!strcmp(id, "wdt"))
- return &rt305x_wdt_clk;
-
- if (!strcmp(id, "uart"))
- return &rt305x_uart_clk;
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h
deleted file mode 100644
index 48ac43e81b..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Ralink RT305x SoC common defines
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT305X_COMMON_H
-#define _RT305X_COMMON_H
-
-void rt305x_clocks_init(void);
-
-#endif /* _RT305X_COMMON_H */ \ No newline at end of file
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c
deleted file mode 100644
index f16ba6d5f1..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * Ralink RT305x SoC platform device registration
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/rt2x00_platform.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-#include "devices.h"
-
-#include <ramips_eth_platform.h>
-#include <rt305x_esw_platform.h>
-
-static struct resource rt305x_flash0_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = KSEG1ADDR(RT305X_FLASH0_BASE),
- .end = KSEG1ADDR(RT305X_FLASH0_BASE) +
- RT305X_FLASH0_SIZE - 1,
- },
-};
-
-struct physmap_flash_data rt305x_flash0_data;
-static struct platform_device rt305x_flash0_device = {
- .name = "physmap-flash",
- .resource = rt305x_flash0_resources,
- .num_resources = ARRAY_SIZE(rt305x_flash0_resources),
- .dev = {
- .platform_data = &rt305x_flash0_data,
- },
-};
-
-static struct resource rt305x_flash1_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = KSEG1ADDR(RT305X_FLASH1_BASE),
- .end = KSEG1ADDR(RT305X_FLASH1_BASE) +
- RT305X_FLASH1_SIZE - 1,
- },
-};
-
-struct physmap_flash_data rt305x_flash1_data;
-static struct platform_device rt305x_flash1_device = {
- .name = "physmap-flash",
- .resource = rt305x_flash1_resources,
- .num_resources = ARRAY_SIZE(rt305x_flash1_resources),
- .dev = {
- .platform_data = &rt305x_flash1_data,
- },
-};
-
-static int rt305x_flash_instance __initdata;
-void __init rt305x_register_flash(unsigned int id)
-{
- struct platform_device *pdev;
- struct physmap_flash_data *pdata;
- u32 t;
- int reg;
-
- switch (id) {
- case 0:
- pdev = &rt305x_flash0_device;
- reg = MEMC_REG_FLASH_CFG0;
- break;
- case 1:
- pdev = &rt305x_flash1_device;
- reg = MEMC_REG_FLASH_CFG1;
- break;
- default:
- return;
- }
-
- t = rt305x_memc_rr(reg);
- t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK;
-
- pdata = pdev->dev.platform_data;
- switch (t) {
- case FLASH_CFG_WIDTH_8BIT:
- pdata->width = 1;
- break;
- case FLASH_CFG_WIDTH_16BIT:
- pdata->width = 2;
- break;
- case FLASH_CFG_WIDTH_32BIT:
- pdata->width = 4;
- break;
- default:
- printk(KERN_ERR "RT305x: flash bank%u witdh is invalid\n", id);
- return;
- }
-
- pdev->id = rt305x_flash_instance;
-
- platform_device_register(pdev);
- rt305x_flash_instance++;
-}
-
-static void rt305x_fe_reset(void)
-{
- u32 reset_bits = RT305X_RESET_FE;
-
- if (soc_is_rt5350())
- reset_bits |= RT305X_RESET_ESW;
- rt305x_sysc_wr(reset_bits, SYSC_REG_RESET_CTRL);
- rt305x_sysc_wr(0, SYSC_REG_RESET_CTRL);
-}
-
-static struct resource rt305x_eth_resources[] = {
- {
- .start = RT305X_FE_BASE,
- .end = RT305X_FE_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT305X_CPU_IRQ_FE,
- .end = RT305X_CPU_IRQ_FE,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct ramips_eth_platform_data ramips_eth_data = {
- .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
- .reset_fe = rt305x_fe_reset,
- .min_pkt_len = 64,
-};
-
-static struct platform_device rt305x_eth_device = {
- .name = "ramips_eth",
- .resource = rt305x_eth_resources,
- .num_resources = ARRAY_SIZE(rt305x_eth_resources),
- .dev = {
- .platform_data = &ramips_eth_data,
- }
-};
-
-static struct resource rt305x_esw_resources[] = {
- {
- .start = RT305X_SWITCH_BASE,
- .end = RT305X_SWITCH_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct rt305x_esw_platform_data rt305x_esw_data = {
- /* All ports are LAN ports. */
- .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE,
- .reg_initval_fct2 = 0x00d6500c,
- /*
- * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
- * turbo mii off, rgmi 3.3v off
- * port5: disabled
- * port6: enabled, gige, full-duplex, rx/tx-flow-control
- */
- .reg_initval_fpa2 = 0x3f502b28,
-};
-
-static struct platform_device rt305x_esw_device = {
- .name = "rt305x-esw",
- .resource = rt305x_esw_resources,
- .num_resources = ARRAY_SIZE(rt305x_esw_resources),
- .dev = {
- .platform_data = &rt305x_esw_data,
- }
-};
-
-void __init rt305x_register_ethernet(void)
-{
- struct clk *clk;
-
- clk = clk_get(NULL, "sys");
- if (IS_ERR(clk))
- panic("unable to get SYS clock, err=%ld", PTR_ERR(clk));
-
- ramips_eth_data.sys_freq = clk_get_rate(clk);
-
- platform_device_register(&rt305x_esw_device);
- platform_device_register(&rt305x_eth_device);
-}
-
-static struct resource rt305x_wifi_resources[] = {
- {
- .start = RT305X_WMAC_BASE,
- .end = RT305X_WMAC_BASE + 0x3FFFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT305X_CPU_IRQ_WNIC,
- .end = RT305X_CPU_IRQ_WNIC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct rt2x00_platform_data rt305x_wifi_data;
-static struct platform_device rt305x_wifi_device = {
- .name = "rt2800_wmac",
- .resource = rt305x_wifi_resources,
- .num_resources = ARRAY_SIZE(rt305x_wifi_resources),
- .dev = {
- .platform_data = &rt305x_wifi_data,
- }
-};
-
-void __init rt305x_register_wifi(void)
-{
- u32 t;
-
- rt305x_wifi_data.eeprom_file_name = "soc_wmac.eeprom";
-
- if (soc_is_rt3352() || soc_is_rt5350()) {
- t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG);
- t &= RT3352_SYSCFG0_XTAL_SEL;
- if (!t)
- rt305x_wifi_data.clk_is_20mhz = 1;
- }
- platform_device_register(&rt305x_wifi_device);
-}
-
-static struct resource rt305x_wdt_resources[] = {
- {
- .start = RT305X_TIMER_BASE,
- .end = RT305X_TIMER_BASE + RT305X_TIMER_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rt305x_wdt_device = {
- .name = "ramips-wdt",
- .id = -1,
- .resource = rt305x_wdt_resources,
- .num_resources = ARRAY_SIZE(rt305x_wdt_resources),
-};
-
-void __init rt305x_register_wdt(void)
-{
- u32 t;
-
- /* enable WDT reset output on pin SRAM_CS_N */
- t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG);
- t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT <<
- RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT;
- rt305x_sysc_wr(t, SYSC_REG_SYSTEM_CONFIG);
-
- platform_device_register(&rt305x_wdt_device);
-}
-
-static struct resource rt305x_spi_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = RT305X_SPI_BASE,
- .end = RT305X_SPI_BASE + RT305X_SPI_SIZE - 1,
- },
-};
-
-static struct platform_device rt305x_spi_device = {
- .name = "ramips-spi",
- .id = 0,
- .resource = rt305x_spi_resources,
- .num_resources = ARRAY_SIZE(rt305x_spi_resources),
-};
-
-void __init rt305x_register_spi(struct spi_board_info *info, int n)
-{
- spi_register_board_info(info, n);
- platform_device_register(&rt305x_spi_device);
-}
-
-static struct resource rt305x_dwc_otg_resources[] = {
- {
- .start = RT305X_OTG_BASE,
- .end = RT305X_OTG_BASE + 0x3FFFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT305X_INTC_IRQ_OTG,
- .end = RT305X_INTC_IRQ_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rt305x_dwc_otg_device = {
- .name = "dwc_otg",
- .resource = rt305x_dwc_otg_resources,
- .num_resources = ARRAY_SIZE(rt305x_dwc_otg_resources),
- .dev = {
- .platform_data = NULL,
- }
-};
-
-static atomic_t rt3352_usb_pwr_ref = ATOMIC_INIT(0);
-
-static int rt3352_usb_power_on(struct platform_device *pdev)
-{
-
- if (atomic_inc_return(&rt3352_usb_pwr_ref) == 1) {
- u32 t;
-
- t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS);
-
- /* enable clock for port0's and port1's phys */
- t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1);
- t |= RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN;
- rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1);
- mdelay(500);
-
- /* pull USBHOST and USBDEV out from reset */
- t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL);
- t &= ~(RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV);
- rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL);
- mdelay(500);
-
- /* enable host mode */
- t = rt305x_sysc_rr(RT3352_SYSC_REG_SYSCFG1);
- t |= RT3352_SYSCFG1_USB0_HOST_MODE;
- rt305x_sysc_wr(t, RT3352_SYSC_REG_SYSCFG1);
-
- t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS);
- }
-
- return 0;
-}
-
-static void rt3352_usb_power_off(struct platform_device *pdev)
-{
-
- if (atomic_dec_return(&rt3352_usb_pwr_ref) == 0) {
- u32 t;
-
- /* put USBHOST and USBDEV into reset */
- t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL);
- t |= RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV;
- rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL);
- udelay(10000);
-
- /* disable clock for port0's and port1's phys*/
- t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1);
- t &= ~(RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN);
- rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1);
- udelay(10000);
- }
-}
-
-static struct usb_ehci_pdata rt3352_ehci_data = {
- .power_on = rt3352_usb_power_on,
- .power_off = rt3352_usb_power_off,
-};
-
-static struct resource rt3352_ehci_resources[] = {
- {
- .start = RT3352_EHCI_BASE,
- .end = RT3352_EHCI_BASE + RT3352_EHCI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT305X_INTC_IRQ_OTG,
- .end = RT305X_INTC_IRQ_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 rt3352_ehci_dmamask = DMA_BIT_MASK(32);
-static struct platform_device rt3352_ehci_device = {
- .name = "ehci-platform",
- .id = -1,
- .resource = rt3352_ehci_resources,
- .num_resources = ARRAY_SIZE(rt3352_ehci_resources),
- .dev = {
- .dma_mask = &rt3352_ehci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &rt3352_ehci_data,
- },
-};
-
-static struct resource rt3352_ohci_resources[] = {
- {
- .start = RT3352_OHCI_BASE,
- .end = RT3352_OHCI_BASE + RT3352_OHCI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT305X_INTC_IRQ_OTG,
- .end = RT305X_INTC_IRQ_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata rt3352_ohci_data = {
- .power_on = rt3352_usb_power_on,
- .power_off = rt3352_usb_power_off,
-};
-
-static u64 rt3352_ohci_dmamask = DMA_BIT_MASK(32);
-static struct platform_device rt3352_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .resource = rt3352_ohci_resources,
- .num_resources = ARRAY_SIZE(rt3352_ohci_resources),
- .dev = {
- .dma_mask = &rt3352_ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &rt3352_ohci_data,
- },
-};
-
-void __init rt305x_register_usb(void)
-{
- if (soc_is_rt305x() || soc_is_rt3350()) {
- platform_device_register(&rt305x_dwc_otg_device);
- } else if (soc_is_rt3352() || soc_is_rt5350()) {
- platform_device_register(&rt3352_ehci_device);
- platform_device_register(&rt3352_ohci_device);
- } else {
- BUG();
- }
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h
deleted file mode 100644
index 22c9ce4232..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Ralink RT305x SoC specific platform device definitions
- *
- * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __RT305X_DEVICES_H
-#define __RT305X_DEVICES_H
-
-#include <asm/mach-ralink/rt305x_esw_platform.h>
-
-struct physmap_flash_data;
-struct spi_board_info;
-
-extern struct physmap_flash_data rt305x_flash0_data;
-extern struct physmap_flash_data rt305x_flash1_data;
-
-extern struct rt305x_esw_platform_data rt305x_esw_data;
-
-void rt305x_register_flash(unsigned int id);
-void rt305x_register_ethernet(void);
-void rt305x_register_wifi(void);
-void rt305x_register_wdt(void);
-void rt305x_register_spi(struct spi_board_info *info, int n);
-void rt305x_register_usb(void);
-
-#endif /* __RT305X_DEVICES_H */
-
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c
deleted file mode 100644
index 602df863ef..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Ralink RT305x SoC early printk support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/serial_reg.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#define UART_READ(r) \
- __raw_readl((void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r)))
-
-#define UART_WRITE(r, v) \
- __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r)))
-
-void prom_putchar(unsigned char ch)
-{
- while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0);
- UART_WRITE(UART_REG_TX, ch);
- while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c
deleted file mode 100644
index fcac2dd860..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Ralink RT305x SoC specific interrupt handling
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-static void rt305x_intc_irq_dispatch(void)
-{
- u32 pending;
-
- pending = ramips_intc_get_status();
-
- if (pending & RT305X_INTC_INT_TIMER0)
- do_IRQ(RT305X_INTC_IRQ_TIMER0);
-
- else if (pending & RT305X_INTC_INT_TIMER1)
- do_IRQ(RT305X_INTC_IRQ_TIMER1);
-
- else if (pending & RT305X_INTC_INT_UART0)
- do_IRQ(RT305X_INTC_IRQ_UART0);
-
- else if (pending & RT305X_INTC_INT_UART1)
- do_IRQ(RT305X_INTC_IRQ_UART1);
-
- else if (pending & RT305X_INTC_INT_PERFC)
- do_IRQ(RT305X_INTC_IRQ_PERFC);
-
- else if (pending & RT305X_INTC_INT_OTG)
- do_IRQ(RT305X_INTC_IRQ_OTG);
-
- /* TODO: handle PIO interrupts as well */
-
- else
- spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending;
-
- pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(RT305X_CPU_IRQ_COUNTER);
-
- else if (pending & STATUSF_IP5)
- do_IRQ(RT305X_CPU_IRQ_FE);
-
- else if (pending & STATUSF_IP6)
- do_IRQ(RT305X_CPU_IRQ_WNIC);
-
- else if (pending & STATUSF_IP2)
- rt305x_intc_irq_dispatch();
-
- else
- spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
- ramips_intc_irq_init(RT305X_INTC_BASE, RT305X_CPU_IRQ_INTC,
- RT305X_INTC_IRQ_BASE);
-
- cp0_perfcount_irq = RT305X_INTC_IRQ_PERFC;
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c
deleted file mode 100644
index ade4fe9008..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Edimax 3g-6200n board support
- *
- * Copyright (C) 2011 Andrzej Hajda <andrzej.hajda@wp.pl>
- * Copyright (C) 2012 Lukasz Golebiowski <lgolebio@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define EDIMAX_GPIO_BUTTON_WPS 12
-#define EDIMAX_GPIO_BTN_0 13 /* Wifi on/off switch button */
-
-#define EDIMAX_GPIO_LED_POWER 9
-#define EDIMAX_GPIO_LED_WLAN 14
-#define EDIMAX_GPIO_LED_3G 7
-
-#define EDIMAX_KEYS_POLL_INTERVAL 20
-#define EDIMAX_KEYS_DEBOUNCE_INTERVAL (3 * EDIMAX_KEYS_POLL_INTERVAL)
-
-static struct gpio_led edimax_leds_gpio[] __initdata = {
- {
- .name = "edimax:green:power",
- .gpio = EDIMAX_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "edimax:amber:wlan",
- .gpio = EDIMAX_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "edimax:blue:3g",
- .gpio = EDIMAX_GPIO_LED_3G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button edimax_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EDIMAX_GPIO_BUTTON_WPS,
- .active_low = 1,
- }, {
- .desc = "wlanswitch",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EDIMAX_GPIO_BTN_0,
- .active_low = 1,
- }
-};
-
-static void __init edimax_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(edimax_leds_gpio),
- edimax_leds_gpio);
- ramips_register_gpio_buttons(-1, EDIMAX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(edimax_gpio_buttons),
- edimax_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_3G_6200N, "3G-6200N", "Edimax 3g-6200n",
- edimax_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c
deleted file mode 100644
index e4993b303e..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Tenda 3G300M board support
- *
- * Copyright (C) 2013 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define TENDA_3G300M_GPIO_BUTTON_RESET 0
-#define TENDA_3G300M_GPIO_BUTTON_MODE 10
-
-#define TENDA_3G300M_GPIO_LED_3GROUTER 11
-#define TENDA_3G300M_GPIO_LED_AP 12
-#define TENDA_3G300M_GPIO_LED_WISPROUTER 9
-#define TENDA_3G300M_GPIO_LED_WIRELESSROUTER 13
-#define TENDA_3G300M_GPIO_LED_3G 7
-#define TENDA_3G300M_GPIO_LED_WPSRESET 14
-
-#define TENDA_3G300M_KEYS_POLL_INTERVAL 20
-#define TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL (3 * TENDA_3G300M_KEYS_POLL_INTERVAL)
-
-const struct flash_platform_data tenda_3g300m_flash = {
- .type = "mx25l3205d",
-};
-
-struct spi_board_info tenda_3g300m_spi_slave_info[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &tenda_3g300m_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- }
-};
-
-static struct gpio_led tenda_3g300m_leds_gpio[] __initdata = {
- {
- .name = "tenda:blue:3grouter",
- .gpio = TENDA_3G300M_GPIO_LED_3GROUTER,
- .active_low = 1,
- },{
- .name = "tenda:blue:ap",
- .gpio = TENDA_3G300M_GPIO_LED_AP,
- .active_low = 1,
- },{
- .name = "tenda:blue:wisprouter",
- .gpio = TENDA_3G300M_GPIO_LED_WISPROUTER,
- .active_low = 1,
- },{
- .name = "tenda:blue:wirelessrouter",
- .gpio = TENDA_3G300M_GPIO_LED_WIRELESSROUTER,
- .active_low = 1,
- },{
- .name = "tenda:blue:3g",
- .gpio = TENDA_3G300M_GPIO_LED_3G,
- .active_low = 1,
- },{
- .name = "tenda:blue:wpsreset",
- .gpio = TENDA_3G300M_GPIO_LED_WPSRESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tenda_3g300m_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TENDA_3G300M_GPIO_BUTTON_RESET,
- .active_low = 1,
- },{
- .desc = "mode",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TENDA_3G300M_GPIO_BUTTON_MODE,
- .active_low = 1,
- }
-};
-
-static void __init tenda_3g300m_init(void)
-{
- rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
- RT305X_GPIO_MODE_UART0_SHIFT) |
- RT305X_GPIO_MODE_JTAG);
-
- rt305x_register_spi(tenda_3g300m_spi_slave_info,
- ARRAY_SIZE(tenda_3g300m_spi_slave_info));
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(tenda_3g300m_leds_gpio),
- tenda_3g300m_leds_gpio);
-
- ramips_register_gpio_buttons(-1, TENDA_3G300M_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tenda_3g300m_gpio_buttons),
- tenda_3g300m_gpio_buttons);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
-
- rt305x_register_wifi();
-
- rt305x_register_wdt();
-
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_3G300M, "3G300M", "Tenda 3G300M",
- tenda_3g300m_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c
deleted file mode 100644
index aca238abe1..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * AirLive Air3GII board support
- *
- * Copyright (C) 2012 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define AIR3GII_GPIO_BUTTON_WPS 7
-
-#define AIR3GII_GPIO_LED_WLAN 8
-#define AIR3GII_GPIO_LED_MOBILE 9
-
-#define AIR3GII_KEYS_POLL_INTERVAL 20
-#define AIR3GII_KEYS_DEBOUNCE_INTERVAL (3 * AIR3GII_KEYS_POLL_INTERVAL)
-
-const struct flash_platform_data air3gii_flash = {
- .type = "en25q32b",
-};
-
-struct spi_board_info air3gii_spi_slave_info[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &air3gii_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpio_led air3gii_leds_gpio[] __initdata = {
- {
- .name = "airlive:green:wlan",
- .gpio = AIR3GII_GPIO_LED_WLAN,
- .active_low = 0,
- }, {
- .name = "airlive:green:mobile",
- .gpio = AIR3GII_GPIO_LED_MOBILE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button air3gii_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AIR3GII_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AIR3GII_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init air3gii_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_spi(air3gii_spi_slave_info,
- ARRAY_SIZE(air3gii_spi_slave_info));
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(air3gii_leds_gpio),
- air3gii_leds_gpio);
-
- ramips_register_gpio_buttons(-1, AIR3GII_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(air3gii_gpio_buttons),
- air3gii_gpio_buttons);
-
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_AIR3GII, "AIR3GII", "AirLive Air3GII",
- air3gii_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c
deleted file mode 100644
index 7f5e00b418..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Allnet ALL0256N board support
- *
- * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define ALL0256N_GPIO_BUTTON_RESET 0
-#define ALL0256N_GPIO_LED_RSSI_LOW 14
-#define ALL0256N_GPIO_LED_RSSI_MED 12
-#define ALL0256N_GPIO_LED_RSSI_HIGH 13
-#define ALL0256N_KEYS_POLL_INTERVAL 20
-#define ALL0256N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0256N_KEYS_POLL_INTERVAL)
-
-const struct flash_platform_data all0256n_flash = {
- .type = "mx25l3205d",
-};
-
-struct spi_board_info all0256n_spi_slave_info[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &all0256n_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpio_keys_button all0256n_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALL0256N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALL0256N_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_led all0256n_leds_gpio[] __initdata = {
- {
- .name = "all0256n:green:rssilow",
- .gpio = ALL0256N_GPIO_LED_RSSI_LOW,
- .active_low = 1,
- }, {
- .name = "all0256n:green:rssimed",
- .gpio = ALL0256N_GPIO_LED_RSSI_MED,
- .active_low = 1,
- }, {
- .name = "all0256n:green:rssihigh",
- .gpio = ALL0256N_GPIO_LED_RSSI_HIGH,
- .active_low = 1,
- }
-};
-
-static void __init all0256n_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_spi(all0256n_spi_slave_info,
- ARRAY_SIZE(all0256n_spi_slave_info));
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio),
- all0256n_leds_gpio);
- ramips_register_gpio_buttons(-1, ALL0256N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(all0256n_gpio_buttons),
- all0256n_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_ALL0256N, "ALL0256N", "Allnet ALL0256N",
- all0256n_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c
deleted file mode 100644
index 71938f028c..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Allnet ALL5002
- *
- * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-// #define ALL5002_GPIO_BUTTON_RESET 0
-// #define ALL5002_GPIO_LED_RSSI_LOW 14
-// #define ALL5002_GPIO_LED_RSSI_MED 12
-// #define ALL5002_GPIO_LED_RSSI_HIGH 13
-// #define ALL5002_BUTTONS_POLL_INTERVAL 20
-
-const struct flash_platform_data all5002_flash = {
- .type = "mx25l25635e",
-};
-
-struct spi_board_info all5002_spi_slave_info[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &all5002_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static void __init all5002_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_spi(all5002_spi_slave_info,
- ARRAY_SIZE(all5002_spi_slave_info));
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_ALL5002, "ALL5002", "Allnet ALL5002/ALL5003",
- all5002_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c
deleted file mode 100644
index b683485d71..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Argus ATP-52B router support
- * http://www.argus-co.com/english/productsview.php?id=70&cid=81
- *
- * Copyright (C) 2011 Roman Yeryomin <roman@advem.lv>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define ARGUS_ATP52B_GPIO_LED_RUN 9
-#define ARGUS_ATP52B_GPIO_LED_NET 13
-#define ARGUS_ATP52B_GPIO_BUTTON_WPS 0
-#define ARGUS_ATP52B_GPIO_BUTTON_RESET 10
-#define ARGUS_ATP52B_KEYS_POLL_INTERVAL 20
-#define ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL (3 * ARGUS_ATP52B_KEYS_POLL_INTERVAL)
-
-static struct gpio_led argus_atp52b_leds_gpio[] __initdata = {
- {
- .name = "argus-atp52b:green:run",
- .gpio = ARGUS_ATP52B_GPIO_LED_RUN,
- .active_low = 1,
- },
- {
- .name = "argus-atp52b:amber:net",
- .gpio = ARGUS_ATP52B_GPIO_LED_NET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button argus_atp52b_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS,
- .active_low = 1,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static void __init argus_atp52b_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio),
- argus_atp52b_leds_gpio);
- ramips_register_gpio_buttons(-1, ARGUS_ATP52B_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(argus_atp52b_gpio_buttons),
- argus_atp52b_gpio_buttons);
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B",
- argus_atp52b_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c
deleted file mode 100644
index 7a21488511..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * NexAira BC2 board support
- *
- * Copyright (C) 2011 Adam J. Porter <porter.adam@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define BC2_GPIO_BUTTON_RESET 17
-#define BC2_GPIO_LED_USB 20
-
-#define BC2_KEYS_POLL_INTERVAL 20
-#define BC2_KEYS_DEBOUNCE_INTERVAL (3 * BC2_KEYS_POLL_INTERVAL)
-
-static struct gpio_led bc2_leds_gpio[] __initdata = {
- {
- .name = "bc2:blue:usb",
- .gpio = BC2_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button bc2_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = BC2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BC2_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static void __init bc2_init(void)
-{
- rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
- RT305X_GPIO_MODE_UART0_SHIFT) |
- RT305X_GPIO_MODE_JTAG);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(bc2_leds_gpio),
- bc2_leds_gpio);
-
- ramips_register_gpio_buttons(-1, BC2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(bc2_gpio_buttons),
- bc2_gpio_buttons);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_BC2, "BC2", "NexAira BC2",
- bc2_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c
deleted file mode 100644
index 3a24516496..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Edimax BR-6425 board support
- *
- * Copyright (C) 2012 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define BR6425_GPIO_LED_POWER 9
-#define BR6425_GPIO_BUTTON_RESET 12
-#define BR6425_GPIO_SWITCH_RFKILL 13
-#define BR6425_GPIO_LED_WLAN 14
-#define BR6425_KEYS_POLL_INTERVAL 20
-#define BR6425_KEYS_DEBOUNCE_INTERVAL (3 * BR6425_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button br6425_gpio_buttons[] __initdata = {
- {
- .desc = "reset_wps",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BR6425_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BR6425_GPIO_SWITCH_RFKILL,
- .active_low = 1,
- },
-};
-
-static struct gpio_led br6425_leds_gpio[] __initdata = {
- {
- .name = "edimax:green:power",
- .gpio = BR6425_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "edimax:orange:wlan",
- .gpio = BR6425_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static void __init br6425_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_flash(0);
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(br6425_leds_gpio),
- br6425_leds_gpio);
- ramips_register_gpio_buttons(-1, BR6425_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(br6425_gpio_buttons),
- br6425_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_BR6425, "BR-6425", "Edimax BR-6425",
- br6425_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c
deleted file mode 100644
index 74dfaa30b0..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Hauppauge/PCTV Broadway Support
- *
- * Copyright (C) 2012 Devin Heitmueller <dheitmueller@kernellabs.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define BROADWAY_GPIO_LED_DISKMOUNT 9
-#define BROADWAY_GPIO_LED_WPS 14
-
-#define BROADWAY_GPIO_BUTTON_WPS 0
-#define BROADWAY_GPIO_BUTTON_FACTORYRESET 13
-
-#define BROADWAY_KEYS_POLL_INTERVAL 20
-#define BROADWAY_KEYS_DEBOUNCE_INTERVAL (3 * BROADWAY_KEYS_POLL_INTERVAL)
-
-static struct gpio_led broadway_leds_gpio[] __initdata = {
- {
- .name = "red:diskmounted",
- .gpio = BROADWAY_GPIO_LED_DISKMOUNT,
- .active_low = 1,
- },
- {
- .name = "red:wps_active",
- .gpio = BROADWAY_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button broadway_gpio_buttons[] __initdata = {
- {
- .desc = "Factory Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BROADWAY_GPIO_BUTTON_FACTORYRESET,
- .active_low = 1,
- },
-#ifdef DJH_WPS_BUTTON_NOT_WIRED_TO_GPIO
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BROADWAY_GPIO_BUTTON_WPS,
- .active_low = 1,
- },
-#endif
-};
-
-static void __init broadway_init(void)
-{
- rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
- RT305X_GPIO_MODE_UART0_SHIFT));
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(broadway_leds_gpio),
- broadway_leds_gpio);
- ramips_register_gpio_buttons(-1, BROADWAY_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(broadway_gpio_buttons),
- broadway_gpio_buttons);
-
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_BROADWAY, "BROADWAY", "Hauppauge Broadway",
- broadway_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c
deleted file mode 100644
index c24527a7ba..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * 8devices Carambola dev board support
- *
- * Copyright (C) 2012 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-static void __init carambola_init(void)
-{
- /* Ugh, inverted logic...
- * This actually puts the pins into GPIO mode rather I2C, SPI, ... */
- rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) |
- RT305X_GPIO_MODE_I2C |
- RT305X_GPIO_MODE_SPI |
- RT305X_GPIO_MODE_JTAG |
- RT305X_GPIO_MODE_MDIO);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_CARAMBOLA, "CARAMBOLA", "8devices Carambola",
- carambola_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c
deleted file mode 100644
index 17a49aac5a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * D-Link DAP-1350 board support
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define DAP_1350_GPIO_LED_POWER_BLUE 8
-#define DAP_1350_GPIO_LED_POWER_RED 9
-#define DAP_1350_GPIO_LED_WPS 14
-
-#define DAP_1350_GPIO_BUTTON_WPS 0 /* active low */
-#define DAP_1350_GPIO_BUTTON_RESET 10 /* active low */
-#define DAP_1350_GPIO_SWITCH_MODE_AP 7 /* active low */
-#define DAP_1350_GPIO_SWITCH_MODE_RT 11 /* active low */
-
-#define DAP_1350_KEYS_POLL_INTERVAL 20
-#define DAP_1350_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1350_KEYS_POLL_INTERVAL)
-
-static struct gpio_led dap_1350_leds_gpio[] __initdata = {
- {
- .name = "d-link:blue:power",
- .gpio = DAP_1350_GPIO_LED_POWER_BLUE,
- .active_low = 1,
- }, {
- .name = "d-link:red:power",
- .gpio = DAP_1350_GPIO_LED_POWER_RED,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DAP_1350_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dap_1350_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DAP_1350_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DAP_1350_GPIO_BUTTON_WPS,
- .active_low = 1,
- }, {
- .desc = "rt",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DAP_1350_GPIO_SWITCH_MODE_RT,
- .active_low = 1,
- }, {
- .desc = "ap",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DAP_1350_GPIO_SWITCH_MODE_AP,
- .active_low = 1,
- }
-};
-
-static void __init dap_1350_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(dap_1350_leds_gpio),
- dap_1350_leds_gpio);
- ramips_register_gpio_buttons(-1, DAP_1350_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dap_1350_gpio_buttons),
- dap_1350_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_DAP_1350, "DAP-1350", "D-Link DAP-1350",
- dap_1350_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c
deleted file mode 100644
index 3ae1b7852c..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * D-Link DIR-300 rev B board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define DIR_300B_GPIO_LED_STATUS_AMBER 8
-#define DIR_300B_GPIO_LED_STATUS_GREEN 9
-#define DIR_300B_GPIO_LED_WPS 13
-/*
- * NOTE: The wan led is also connected to the switch, both
- * switch and gpio must be active to make it light up
- */
-#define DIR_300B_GPIO_LED_WAN_GREEN 12
-#define DIR_300B_GPIO_LED_WAN_AMBER 14
-
-/*
- * NOTE: the WPS led in DIR-620 consists of two antiparallel leds,
- * so they can't be lit simultaneously
- */
-#define DIR_620_GPIO_LED_WPS_AMBER 11
-
-#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */
-#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */
-
-#define DIR_300B_KEYS_POLL_INTERVAL 20
-#define DIR_300B_KEYS_DEBOUNCE_INTERVAL (3 * DIR_300B_KEYS_POLL_INTERVAL)
-
-static struct gpio_led dir_300b_leds_gpio[] __initdata = {
- {
- .name = "d-link:amber:status",
- .gpio = DIR_300B_GPIO_LED_STATUS_AMBER,
- .active_low = 1,
- }, {
- .name = "d-link:green:status",
- .gpio = DIR_300B_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_300B_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_300B_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_300B_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir_300b_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_300B_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_300B_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_led dir_620_leds_gpio[] __initdata = {
- {
- .name = "d-link:amber:status",
- .gpio = DIR_300B_GPIO_LED_STATUS_AMBER,
- .active_low = 1,
- }, {
- .name = "d-link:green:status",
- .gpio = DIR_300B_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_300B_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_300B_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_300B_GPIO_LED_WPS,
- }, {
- .name = "d-link:amber:wps",
- .gpio = DIR_620_GPIO_LED_WPS_AMBER,
- }
-};
-
-static void __init dir_common_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_buttons(-1, DIR_300B_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_300b_gpio_buttons),
- dir_300b_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-static void __init dir_300b_init(void)
-{
- dir_common_init();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
- dir_300b_leds_gpio);
-}
-
-static void __init dir_620a1_init(void)
-{
- dir_common_init();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_620_leds_gpio),
- dir_620_leds_gpio);
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1",
- dir_300b_init);
-
-MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1",
- dir_300b_init);
-
-MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2",
- dir_300b_init);
-
-MIPS_MACHINE(RAMIPS_MACH_DIR_615_D, "DIR-615-D", "D-Link DIR-615 D",
- dir_300b_init);
-
-MIPS_MACHINE(RAMIPS_MACH_DIR_620_A1, "DIR-620-A1", "D-Link DIR-620 A1",
- dir_620a1_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c
deleted file mode 100644
index dbfe4aa92f..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * D-Link DIR-615 H1
- *
- * Copyright (C) 2012 Mikko Hissa <mikko.hissa@uta.fi>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define DIR_615_H1_GPIO_LED_WAN_AMBER 12 /* active low */
-#define DIR_615_H1_GPIO_LED_WAN_GREEN 13 /* active low */
-#define DIR_615_H1_GPIO_LED_WPS_BLUE 14 /* active low */
-
-#define DIR_615_H1_GPIO_LED_STATUS_AMBER 7
-#define DIR_615_H1_GPIO_LED_STATUS_GREEN 9
-
-#define DIR_615_H1_GPIO_BUTTON_RESET 10 /* active low */
-#define DIR_615_H1_GPIO_BUTTON_WPS 0 /* active low */
-
-#define DIR_615_H1_KEYS_POLL_INTERVAL 20
-#define DIR_615_H1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_H1_KEYS_POLL_INTERVAL)
-
-static struct gpio_led dir_615_h1_leds_gpio[] __initdata = {
- {
- .name = "d-link:amber:status",
- .gpio = DIR_615_H1_GPIO_LED_STATUS_AMBER,
- }, {
- .name = "d-link:green:status",
- .gpio = DIR_615_H1_GPIO_LED_STATUS_GREEN,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_615_H1_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_615_H1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_615_H1_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir_615_h1_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_H1_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_H1_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-const struct flash_platform_data dir615h1_flash = {
- .type = "mx25l3205d",
-};
-
-struct spi_board_info dir615h1_spi_slave_info[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &dir615h1_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static void __init dir615h1_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_spi(dir615h1_spi_slave_info,
- ARRAY_SIZE(dir615h1_spi_slave_info));
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_615_h1_leds_gpio),
- dir_615_h1_leds_gpio);
- ramips_register_gpio_buttons(-1, DIR_615_H1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_615_h1_gpio_buttons),
- dir_615_h1_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_DIR_615_H1, "DIR-615-H1", "D-Link DIR-615 H1",
- dir615h1_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c
deleted file mode 100644
index d5f65df5ec..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Senao / EnGenius ESR-9753 board support
- *
- * Copyright (C) 2011 Artur Wronowski <arteqw@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define ESR_9753_GPIO_LED_POWER 8
-#define ESR_9753_GPIO_LED_WPS 14
-
-#define ESR_9753_GPIO_BUTTON_WPS 0 /* active low */
-#define ESR_9753_GPIO_BUTTON_RESET 10 /* active low */
-
-#define ESR_9753_KEYS_POLL_INTERVAL 20
-#define ESR_9753_KEYS_DEBOUNCE_INTERVAL (3 * ESR_9753_KEYS_POLL_INTERVAL)
-
-static struct gpio_led esr_9753_leds_gpio[] __initdata = {
- {
- .name = "esr-9753:orange:power",
- .gpio = ESR_9753_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "esr-9753:orange:wps",
- .gpio = ESR_9753_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button esr_9753_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ESR_9753_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ESR_9753_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init esr_9753_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(esr_9753_leds_gpio),
- esr_9753_leds_gpio);
-
- ramips_register_gpio_buttons(-1, ESR_9753_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(esr_9753_gpio_buttons),
- esr_9753_gpio_buttons);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_ESR_9753, "ESR-9753", "Senao / EnGenius ESR-9753",
- esr_9753_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c
deleted file mode 100644
index 073fc75a6e..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Belkin F5D8235 v2 board support
- *
- * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define F5D8235_V2_GPIO_LED_INTERNET_BLUE 5
-#define F5D8235_V2_GPIO_LED_INTERNET_AMBER 6
-#define F5D8235_V2_GPIO_LED_MODEM_BLUE 11
-#define F5D8235_V2_GPIO_LED_MODEM_AMBER 8
-#define F5D8235_V2_GPIO_LED_ROUTER 9
-#define F5D8235_V2_GPIO_LED_STORAGE_BLUE 23
-#define F5D8235_V2_GPIO_LED_STORAGE_AMBER 22
-#define F5D8235_V2_GPIO_LED_SECURITY_BLUE 13
-#define F5D8235_V2_GPIO_LED_SECURITY_AMBER 12
-
-static struct gpio_led f5d8235v2_leds_gpio[] __initdata = {
- {
- .name = "f5d8235v2:blue:internet",
- .gpio = F5D8235_V2_GPIO_LED_INTERNET_BLUE,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:amber:internet",
- .gpio = F5D8235_V2_GPIO_LED_INTERNET_AMBER,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:blue:modem",
- .gpio = F5D8235_V2_GPIO_LED_MODEM_BLUE,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:amber:modem",
- .gpio = F5D8235_V2_GPIO_LED_MODEM_AMBER,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:blue:router",
- .gpio = F5D8235_V2_GPIO_LED_ROUTER,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:blue:storage",
- .gpio = F5D8235_V2_GPIO_LED_STORAGE_BLUE,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:amber:storage",
- .gpio = F5D8235_V2_GPIO_LED_STORAGE_AMBER,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:blue:security",
- .gpio = F5D8235_V2_GPIO_LED_SECURITY_BLUE,
- .active_low = 1,
- }, {
- .name = "f5d8235v2:amber:security",
- .gpio = F5D8235_V2_GPIO_LED_SECURITY_AMBER,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_platform_data f5d8235v2_switch_data = {
- .gpio_sda = RT305X_GPIO_I2C_SD,
- .gpio_sck = RT305X_GPIO_I2C_SCLK,
-};
-
-static struct platform_device f5d8235v2_switch = {
- .name = RTL8366RB_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &f5d8235v2_switch_data,
- }
-};
-
-static void __init f5d8235v2_init(void)
-{
- rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
- RT305X_GPIO_MODE_UART0_SHIFT) |
- RT305X_GPIO_MODE_I2C |
- RT305X_GPIO_MODE_SPI |
- RT305X_GPIO_MODE_MDIO);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio),
- f5d8235v2_leds_gpio);
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
- rt305x_register_ethernet();
- platform_device_register(&f5d8235v2_switch);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2",
- f5d8235v2_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c
deleted file mode 100644
index a433e40e91..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * La Fonera20N board support
- *
- * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define FONERA20N_GPIO_BUTTON_RESET 12
-#define FONERA20N_GPIO_SWITCH 13
-#define FONERA20N_GPIO_LED_WIFI 7
-#define FONERA20N_GPIO_LED_POWER 9
-#define FONERA20N_GPIO_LED_USB 14
-
-#define FONERA20N_KEYS_POLL_INTERVAL 20
-#define FONERA20N_KEYS_DEBOUNCE_INTERVAL (3 * FONERA20N_KEYS_POLL_INTERVAL)
-
-static struct gpio_led fonera20n_leds_gpio[] __initdata = {
- {
- .name = "fonera20n:orange:wifi",
- .gpio = FONERA20N_GPIO_LED_WIFI,
- .active_low = 1,
- }, {
- .name = "fonera20n:green:power",
- .gpio = FONERA20N_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "fonera20n:orange:usb",
- .gpio = FONERA20N_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button fonera20n_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = FONERA20N_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "switch",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = FONERA20N_GPIO_SWITCH,
- .active_low = 1,
- }
-};
-
-static void __init fonera20n_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(fonera20n_leds_gpio),
- fonera20n_leds_gpio);
-
- ramips_register_gpio_buttons(-1, FONERA20N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(fonera20n_gpio_buttons),
- fonera20n_gpio_buttons);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_FONERA20N, "FONERA20N", "La Fonera 2.0N",
- fonera20n_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c
deleted file mode 100644
index b868244cca..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * ARC FreeStation2/5 board support
- *
- * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012 Pau Escrich <p4u@dabax.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-static void __init freestation5_init(void)
-{
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_FREESTATION5, "FREESTATION5", "ARC FreeStation5",
- freestation5_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c
deleted file mode 100644
index b274b917da..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Aztech HW550-3G board support
- *
- * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define HW550_3G_GPIO_LED_USB 8
-#define HW550_3G_GPIO_LED_3G 11
-#define HW550_3G_GPIO_LED_STATUS 12
-#define HW550_3G_GPIO_LED_WPS 14
-
-#define HW550_3G_GPIO_BUTTON_RESET 10
-#define HW550_3G_GPIO_BUTTON_CONNECT 7
-#define HW550_3G_GPIO_BUTTON_WPS 0
-
-#define HW550_3G_KEYS_POLL_INTERVAL 20
-#define HW550_3G_KEYS_DEBOUNCE_INTERVAL (3 * HW550_3G_KEYS_POLL_INTERVAL)
-
-static struct gpio_led hw550_3g_leds_gpio[] __initdata = {
- {
- .name = "hw550-3g:green:usb",
- .gpio = HW550_3G_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "hw550-3g:green:3g",
- .gpio = HW550_3G_GPIO_LED_3G,
- .active_low = 1,
- }, {
- .name = "hw550-3g:green:status",
- .gpio = HW550_3G_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "hw550-3g:green:wps",
- .gpio = HW550_3G_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button hw550_3g_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HW550_3G_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "connect",
- .type = EV_KEY,
- .code = KEY_CONNECT,
- .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HW550_3G_GPIO_BUTTON_CONNECT,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HW550_3G_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-#define HW550_3G_GPIO_MODE \
- ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
- RT305X_GPIO_MODE_MDIO)
-
-static void __init hw550_3g_init(void)
-{
- rt305x_gpio_init(HW550_3G_GPIO_MODE);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(hw550_3g_leds_gpio),
- hw550_3g_leds_gpio);
- ramips_register_gpio_buttons(-1, HW550_3G_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(hw550_3g_gpio_buttons),
- hw550_3g_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_HW550_3G, "HW550-3G", "Aztech HW550-3G",
- hw550_3g_init);
-
-MIPS_MACHINE(RAMIPS_MACH_ALL0239_3G, "ALL0239-3G", "Allnet ALL0239-3G",
- hw550_3g_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c
deleted file mode 100644
index 38d217a4ff..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * MoFi Network MOFI3500-3GN board support
- *
- * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define MOFI3500_3GN_GPIO_LED_USB 8
-#define MOFI3500_3GN_GPIO_LED_3G 11
-#define MOFI3500_3GN_GPIO_LED_STATUS 12
-#define MOFI3500_3GN_GPIO_LED_WPS 14
-
-#define MOFI3500_3GN_GPIO_BUTTON_RESET 10
-#define MOFI3500_3GN_GPIO_BUTTON_CONNECT 7
-#define MOFI3500_3GN_GPIO_BUTTON_WPS 0
-
-#define MOFI3500_3GN_KEYS_POLL_INTERVAL 20
-#define MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL (3 * MOFI3500_3GN_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mofi3500_3gn_leds_gpio[] __initdata = {
- {
- .name = "mofi3500-3gn:green:usb",
- .gpio = MOFI3500_3GN_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "mofi3500-3gn:green:3g",
- .gpio = MOFI3500_3GN_GPIO_LED_3G,
- .active_low = 1,
- }, {
- .name = "mofi3500-3gn:green:status",
- .gpio = MOFI3500_3GN_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "mofi3500-3gn:green:wps",
- .gpio = MOFI3500_3GN_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button mofi3500_3gn_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MOFI3500_3GN_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "connect",
- .type = EV_KEY,
- .code = KEY_CONNECT,
- .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MOFI3500_3GN_GPIO_BUTTON_CONNECT,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MOFI3500_3GN_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-#define MOFI3500_3GN_GPIO_MODE \
- ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
- RT305X_GPIO_MODE_MDIO)
-
-static void __init mofi3500_3gn_init(void)
-{
- rt305x_gpio_init(MOFI3500_3GN_GPIO_MODE);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(mofi3500_3gn_leds_gpio),
- mofi3500_3gn_leds_gpio);
- ramips_register_gpio_buttons(-1, MOFI3500_3GN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mofi3500_3gn_gpio_buttons),
- mofi3500_3gn_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_MOFI3500_3GN, "MOFI3500-3GN", "MoFi Network MOFI3500-3GN",
- mofi3500_3gn_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c
deleted file mode 100644
index 01cabbc0bf..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Planex MZK-W300NH2 board support
- *
- * Copyright (C) 2012 Samir Ibradžić <sibradzic@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define MZKW300NH2_GPIO_BUTTON_RESET 0 /* active low */
-#define MZKW300NH2_GPIO_BUTTON_WPS 12 /* active low */
-#define MZKW300NH2_GPIO_SWITCH_MODE_RT 13 /* active low */
-
-#define MZKW300NH2_GPIO_LED_POWER 9
-#define MZKW300NH2_GPIO_LED_WLAN 14
-#define MZKW300NH2_GPIO_LED_WPS 11
-
-#define MZKW300NH2_KEYS_POLL_INTERVAL 20
-#define MZKW300NH2_KEYS_DEBOUNCE_INTERVAL (3 * MZKW300NH2_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mzkw300nh2_leds_gpio[] __initdata = {
- {
- .name = "mzkw300nh2:green:power",
- .gpio = MZKW300NH2_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "mzkw300nh2:amber:wlan",
- .gpio = MZKW300NH2_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "mzkw300nh2:amber:wps",
- .gpio = MZKW300NH2_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button mzkw300nh2_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZKW300NH2_GPIO_BUTTON_WPS,
- .active_low = 1,
- }, {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZKW300NH2_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "rt",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZKW300NH2_GPIO_SWITCH_MODE_RT,
- .active_low = 1,
- }
-};
-
-static void __init mzkw300nh2_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) |
- RT305X_GPIO_MODE_I2C |
- RT305X_GPIO_MODE_SPI |
- RT305X_GPIO_MODE_JTAG);
-
- rt305x_register_flash(0);
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(mzkw300nh2_leds_gpio),
- mzkw300nh2_leds_gpio);
- ramips_register_gpio_buttons(-1, MZKW300NH2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mzkw300nh2_gpio_buttons),
- mzkw300nh2_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_MZKW300NH2, "MZK-W300NH2", "Planex MZK-W300NH2",
- mzkw300nh2_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c
deleted file mode 100644
index 856520368f..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * ZyXEL NBG-419N board support
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define NBG_419N_GPIO_LED_POWER 9
-#define NBG_419N_GPIO_LED_WPS 14
-
-#define NBG_419N_GPIO_BUTTON_WPS 0 /* active low */
-#define NBG_419N_GPIO_BUTTON_RESET 10 /* active low */
-
-#define NBG_419N_KEYS_POLL_INTERVAL 20
-#define NBG_419N_KEYS_DEBOUNCE_INTERVAL (3 * NBG_419N_KEYS_POLL_INTERVAL)
-
-static struct gpio_led nbg_419n_leds_gpio[] __initdata = {
- {
- .name = "nbg-419n:green:power",
- .gpio = NBG_419N_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "nbg-419n:green:wps",
- .gpio = NBG_419N_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button nbg_419n_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG_419N_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG_419N_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init nbg_419n_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(nbg_419n_leds_gpio),
- nbg_419n_leds_gpio);
- ramips_register_gpio_buttons(-1, NBG_419N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(nbg_419n_gpio_buttons),
- nbg_419n_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_NBG_419N, "NBG-419N", "ZyXEL NBG-419N", nbg_419n_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c
deleted file mode 100644
index 3c9d047908..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Netcore NW718 board support
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define NW718_GPIO_LED_USB 8
-#define NW718_GPIO_LED_CPU 13
-#define NW718_GPIO_LED_WPS 14
-
-#define NW718_GPIO_BUTTON_WPS 0
-#define NW718_GPIO_BUTTON_RESET 10
-
-#define NW718_GPIO_SPI_CS0 3
-
-#define NW718_KEYS_POLL_INTERVAL 20
-#define NW718_KEYS_DEBOUNCE_INTERVAL (3 * NW718_KEYS_POLL_INTERVAL)
-
-static struct gpio_led nw718_leds_gpio[] __initdata = {
- {
- .name = "nw718:amber:cpu",
- .gpio = NW718_GPIO_LED_CPU,
- .active_low = 1,
- }, {
- .name = "nw718:amber:usb",
- .gpio = NW718_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "nw718:amber:wps",
- .gpio = NW718_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button nw718_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NW718_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NW718_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info nw718_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }
-};
-
-static void __init nw718_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_I2C |
- RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(nw718_leds_gpio),
- nw718_leds_gpio);
- ramips_register_gpio_buttons(-1, NW718_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(nw718_gpio_buttons),
- nw718_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_spi(nw718_spi_info, ARRAY_SIZE(nw718_spi_info));
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "NW718", "Netcore NW718", nw718_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c
deleted file mode 100644
index 930ac3028f..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Omnima MiniEMBWiFi board support
- *
- * Copyright (C) 2011 Johnathan Boyce <jon.boyce@globalreach.eu.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define OMNI_EMB_GPIO_BUTTON_RESET 12 /* active low */
-
-#define OMNI_EMB_KEYS_POLL_INTERVAL 20
-#define OMNI_EMB_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_KEYS_POLL_INTERVAL)
-
-#define OMNI_EMB_GPIO_LED_STATUS 9
-#define OMNI_EMB_GPIO_LED_WLAN 14
-
-static struct gpio_led omni_emb_leds_gpio[] __initdata = {
- {
- .name = "emb:green:status",
- .gpio = OMNI_EMB_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "emb:green:wlan",
- .gpio = OMNI_EMB_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button omni_emb_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OMNI_EMB_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OMNI_EMB_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static void __init omni_emb_init(void)
-{
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
-
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_leds_gpio),
- omni_emb_leds_gpio);
- ramips_register_gpio_buttons(-1, OMNI_EMB_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(omni_emb_gpio_buttons),
- omni_emb_gpio_buttons);
-
- rt305x_register_flash(0);
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB, "OMNI-EMB", "Omnima MiniEMBWiFi",
- omni_emb_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c
deleted file mode 100644
index a6d10f7cbe..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Petatel PSR-680W Wireless 3G Router support
- *
- * Copyright (C) 2012 Dmitry Shmygov <shmygov@rambler.ru>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define PSR_680W_GPIO_BUTTON_RESET 0 /* active low */
-
-#define PSR_680W_GPIO_LED_STATUS 19
-
-#define PSR_680W_KEYS_POLL_INTERVAL 20
-#define PSR_680W_KEYS_DEBOUNCE_INTERVAL (3 * PSR_680W_KEYS_POLL_INTERVAL)
-
-
-static struct gpio_led psr_680w_leds_gpio[] __initdata = {
- {
- .name = "psr-680w:red:wan",
- .gpio = PSR_680W_GPIO_LED_STATUS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button psr_680w_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = PSR_680W_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PSR_680W_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static void __init psr_680w_init(void)
-{
- rt305x_gpio_init((RT305X_GPIO_MODE_I2S_UARTF << RT305X_GPIO_MODE_UART0_SHIFT) |
- RT305X_GPIO_MODE_SPI |
- RT305X_GPIO_MODE_JTAG |
- RT305X_GPIO_MODE_MDIO |
- RT305X_GPIO_MODE_RGMII);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(psr_680w_leds_gpio),
- psr_680w_leds_gpio);
- ramips_register_gpio_buttons(-1, PSR_680W_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(psr_680w_gpio_buttons),
- psr_680w_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_PSR_680W, "PSR-680W",
- "Petatel PSR-680W Wireless 3G Router",
- psr_680w_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c
deleted file mode 100644
index 5baf32a49a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Prolink PWH2004 support (or Abocom WR5205)
- *
- * Copyright (C) 2010 Esa Hyytia <esa@netlab.tkk.fi>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define PWH2004_GPIO_BUTTON_WPS 12
-#define PWH2004_GPIO_LED_POWER 9
-#define PWH2004_GPIO_LED_WIFI 14
-#define PWH2004_KEYS_POLL_INTERVAL 20
-#define PWH2004_KEYS_DEBOUNCE_INTERVAL (3 * PWH2004_KEYS_POLL_INTERVAL)
-
-static struct gpio_led pwh2004_leds_gpio[] __initdata = {
- {
- .name = "pwh2004:red:wifi",
- .gpio = PWH2004_GPIO_LED_WIFI,
- .active_low = 1,
- }, {
- .name = "pwh2004:green:power",
- .gpio = PWH2004_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button pwh2004_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = PWH2004_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PWH2004_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init pwh2004_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(pwh2004_leds_gpio),
- pwh2004_leds_gpio);
- ramips_register_gpio_buttons(-1, PWH2004_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pwh2004_gpio_buttons),
- pwh2004_gpio_buttons);
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_PWH2004, "PWH2004", "Prolink PWH2004",
- pwh2004_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c
deleted file mode 100644
index 2f0f710874..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Asus RT-G32 rev B board support
- *
- * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define RT_G32B_GPIO_BUTTON_WPS 0 /* active low */
-#define RT_G32B_GPIO_BUTTON_RESET 10 /* active low */
-
-#define RT_G32B_KEYS_POLL_INTERVAL 20
-#define RT_G32B_KEYS_DEBOUNCE_INTERVAL (3 * RT_G32B_KEYS_POLL_INTERVAL)
-
-const struct flash_platform_data rt_g32b_flash = {
- .type = "mx25l3205d",
-};
-
-struct spi_board_info __initdata rt_g32b_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &rt_g32b_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpio_keys_button rt_g32b_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_G32B_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_G32B_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init rt_g32b_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_spi(rt_g32b_spi_slave_info,
- ARRAY_SIZE(rt_g32b_spi_slave_info));
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_buttons(-1, RT_G32B_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rt_g32b_gpio_buttons),
- rt_g32b_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_RT_G32_B1, "RT-G32-B1", "Asus RT-G32 B1",
- rt_g32b_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c
deleted file mode 100644
index 5b496d4eac..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * ASUS RT-N10+ board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define RT_N10_PLUS_GPIO_LED_WPS 14
-
-#define RT_N10_PLUS_GPIO_BUTTON_WPS 0 /* active low */
-#define RT_N10_PLUS_GPIO_BUTTON_RESET 10 /* active low */
-
-#define RT_N10_PLUS_KEYS_POLL_INTERVAL 20
-#define RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL (3 * RT_N10_PLUS_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rt_n10_plus_leds_gpio[] __initdata = {
- {
- .name = "asus:green:wps",
- .gpio = RT_N10_PLUS_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button rt_n10_plus_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_N10_PLUS_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_N10_PLUS_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init rt_n10_plus_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n10_plus_leds_gpio),
- rt_n10_plus_leds_gpio);
- ramips_register_gpio_buttons(-1, RT_N10_PLUS_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rt_n10_plus_gpio_buttons),
- rt_n10_plus_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_RT_N10_PLUS, "RT-N10-PLUS", "Asus RT-N10+",
- rt_n10_plus_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c
deleted file mode 100644
index cae857abd4..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * ASUS RT-N13U board support
- *
- * Copyright (C) 2012 lintel<lintel.huang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define RT_N13U_GPIO_BUTTON_RESET 10
-#define RT_N13U_GPIO_BUTTON_WPS 0
-
-#define RT_N13U_GPIO_LED_POWER 7
-#define RT_N13U_GPIO_LED_WIFI 8
-
-
-#define RT_N13U_BUTTONS_POLL_INTERVAL 10
-#define RT_N13U_BUTTONS_DEBOUNCE_INTERVAL (3 * RT_N13U_BUTTONS_POLL_INTERVAL)
-
-static struct gpio_led rt_n13u_leds_gpio[] __initdata = {
- {
- .name = "rt-n13u:power",
- .gpio = RT_N13U_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "rt-n13u:wifi",
- .gpio = RT_N13U_GPIO_LED_WIFI,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button rt_n13u_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL,
- .gpio = RT_N13U_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL,
- .gpio = RT_N13U_GPIO_BUTTON_WPS,
- .active_low = 1,
- },
-};
-
-static void __init rt_n13u_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n13u_leds_gpio),
- rt_n13u_leds_gpio);
-
- ramips_register_gpio_buttons(-1, RT_N13U_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(rt_n13u_gpio_buttons),
- rt_n13u_gpio_buttons);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_RT_N13U, "RT-N13U", "Asus RT-N13U",
- rt_n13u_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c
deleted file mode 100644
index 31f002c9aa..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Skyline SL-R7205 Wireless 3G Router support
- *
- * Copyright (C) 2012 Haipoh Teoh <hpteoh@ceedtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define SL_R7205_GPIO_BUTTON_WPS 0
-#define SL_R7205_GPIO_BUTTON_RESET 10 /* active low */
-
-#define SL_R7205_GPIO_LED_WIFI 7
-
-#define SL_R7205_KEYS_POLL_INTERVAL 20
-#define SL_R7205_KEYS_DEBOUNCE_INTERVAL (3 * SL_R7205_KEYS_POLL_INTERVAL)
-
-static struct gpio_led sl_r7205_leds_gpio[] __initdata = {
- {
- .name = "sl-r7205:green:wifi",
- .gpio = SL_R7205_GPIO_LED_WIFI,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button sl_r7205_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SL_R7205_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SL_R7205_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init sl_r7205_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(sl_r7205_leds_gpio),
- sl_r7205_leds_gpio);
- ramips_register_gpio_buttons(-1, SL_R7205_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(sl_r7205_gpio_buttons),
- sl_r7205_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_SL_R7205, "SL-R7205",
- "Skyline SL-R7205 Wireless 3G Router",
- sl_r7205_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c
deleted file mode 100644
index a5296941a1..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * UR-326N4G board support
- *
- * Copyright (C) 2013 Dmitry Lebedev <Lebedev@upvel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-
-#define UR_326N4G_GPIO_LED_3G 9
-#define UR_326N4G_GPIO_LED_GATEWAY 11
-#define UR_326N4G_GPIO_LED_AP 12
-#define UR_326N4G_GPIO_LED_STATION 13
-#define UR_326N4G_GPIO_LED_WPS 14
-
-#define UR_326N4G_GPIO_BUTTON_RESET 10
-#define UR_326N4G_GPIO_BUTTON_CONNECT 7
-#define UR_326N4G_GPIO_BUTTON_WPS 0
-#define UR_326N4G_GPIO_BUTTON_WPS2 8
-
-#define UR_326N4G_KEYS_POLL_INTERVAL 20
-#define UR_326N4G_KEYS_DEBOUNCE_INTERVAL (3 * UR_326N4G_KEYS_POLL_INTERVAL)
-
-static struct gpio_led UR_326N4G_leds_gpio[] __initdata = {
- {
- .name = "ur326:green:3g",
- .gpio = UR_326N4G_GPIO_LED_3G,
- .active_low = 1,
- }, {
- .name = "ur326:green:gateway",
- .gpio = UR_326N4G_GPIO_LED_GATEWAY,
- .active_low = 1,
- }, {
- .name = "ur326:green:ap",
- .gpio = UR_326N4G_GPIO_LED_AP,
- .active_low = 1,
- }, {
- .name = "ur326:green:wps",
- .gpio = UR_326N4G_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "ur326:green:station",
- .gpio = UR_326N4G_GPIO_LED_STATION,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button UR_326N4G_gpio_buttons[] __initdata = {
- {
- .desc = "reset_wps",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UR_326N4G_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "mode",
- .type = EV_KEY,
- .code = KEY_M,
- .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UR_326N4G_GPIO_BUTTON_CONNECT,
- .active_low = 1,
- }
-};
-
-#define UR_326N4G_GPIO_MODE \
- ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
- RT305X_GPIO_MODE_MDIO)
-
-static void __init UR_326N4G_init(void)
-{
- rt305x_gpio_init(UR_326N4G_GPIO_MODE);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_326N4G_leds_gpio),
- UR_326N4G_leds_gpio);
- ramips_register_gpio_buttons(-1, UR_326N4G_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(UR_326N4G_gpio_buttons),
- UR_326N4G_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_UR_326N4G, "UR-326N4G", "UR-326N4G Wireless N router",
- UR_326N4G_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c
deleted file mode 100644
index 0ff264957a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-
-#define UR_336UN_GPIO_LED_3G 9
-#define UR_336UN_GPIO_LED_GATEWAY 11
-#define UR_336UN_GPIO_LED_AP 12
-#define UR_336UN_GPIO_LED_STATION 13
-#define UR_336UN_GPIO_LED_WPS 14
-
-#define UR_336UN_GPIO_BUTTON_RESET 10
-#define UR_336UN_GPIO_BUTTON_CONNECT 7
-#define UR_336UN_GPIO_BUTTON_WPS 0
-#define UR_336UN_GPIO_BUTTON_WPS2 8
-
-#define UR_336UN_KEYS_POLL_INTERVAL 20
-#define UR_336UN_KEYS_DEBOUNCE_INTERVAL (3 * UR_336UN_KEYS_POLL_INTERVAL)
-
-static struct gpio_led UR_336UN_leds_gpio[] __initdata = {
- {
- .name = "ur336:green:3g",
- .gpio = UR_336UN_GPIO_LED_3G,
- .active_low = 1,
- }, {
- .name = "ur336:green:gateway",
- .gpio = UR_336UN_GPIO_LED_GATEWAY,
- .active_low = 1,
- }, {
- .name = "ur336:green:ap",
- .gpio = UR_336UN_GPIO_LED_AP,
- .active_low = 1,
- }, {
- .name = "ur336:green:wps",
- .gpio = UR_336UN_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "ur336:green:station",
- .gpio = UR_336UN_GPIO_LED_STATION,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button UR_336UN_gpio_buttons[] __initdata = {
- {
- .desc = "reset_wps",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UR_336UN_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "mode",
- .type = EV_KEY,
- .code = KEY_M,
- .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UR_336UN_GPIO_BUTTON_CONNECT,
- .active_low = 1,
- }
-};
-
-#define UR_336UN_GPIO_MODE \
- ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
- RT305X_GPIO_MODE_MDIO)
-
-static void __init UR_336UN_init(void)
-{
- rt305x_gpio_init(UR_336UN_GPIO_MODE);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_336UN_leds_gpio),
- UR_336UN_leds_gpio);
- ramips_register_gpio_buttons(-1, UR_336UN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(UR_336UN_gpio_buttons),
- UR_336UN_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_UR_336UN, "UR-336UN", "UR-336UN Wireless N router",
- UR_336UN_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c
deleted file mode 100644
index 7f43dabdc4..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Ralink AP-RT3052-V22RW-2X2 board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define V22RW_2X2_GPIO_BUTTON_WPS 0
-#define V22RW_2X2_GPIO_BUTTON_SWRST 10
-#define V22RW_2X2_GPIO_LED_SECURITY 13
-#define V22RW_2X2_GPIO_LED_WPS 14
-
-#define V22RW_2X2_KEYS_POLL_INTERVAL 20
-#define V22RW_2X2_KEYS_DEBOUNCE_INTERVAL (3 * V22RW_2X2_KEYS_POLL_INTERVAL)
-
-static struct gpio_led v22rw_2x2_leds_gpio[] __initdata = {
- {
- .name = "v22rw-2x2:green:security",
- .gpio = V22RW_2X2_GPIO_LED_SECURITY,
- .active_low = 1,
- }, {
- .name = "v22rw-2x2:red:wps",
- .gpio = V22RW_2X2_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button v22rw_2x2_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = V22RW_2X2_GPIO_BUTTON_SWRST,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = V22RW_2X2_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init v22rw_2x2_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(v22rw_2x2_leds_gpio),
- v22rw_2x2_leds_gpio);
- ramips_register_gpio_buttons(-1, V22RW_2X2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(v22rw_2x2_gpio_buttons),
- v22rw_2x2_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_V22RW_2X2, "V22RW-2X2", "Ralink AP-RT3052-V22RW-2X2",
- v22rw_2x2_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c
deleted file mode 100644
index 7c8eb867cd..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Tenda W306R V2.0 board support
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define W306R_V20_GPIO_LED_SYS 9
-#define W306R_V20_GPIO_LED_WPS 13
-
-#define W306R_V20_GPIO_BUTTON_RESET 10
-
-#define W306R_V20_KEYS_POLL_INTERVAL 20
-#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL)
-
-static struct gpio_led w306r_v20_leds_gpio[] __initdata = {
- {
- .name = "w306r-v20:green:sys",
- .gpio = W306R_V20_GPIO_LED_SYS,
- .active_low = 1,
- }, {
- .name = "w306r-v20:green:wps",
- .gpio = W306R_V20_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = {
- {
- .desc = "RESET/WPS",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL,
- .gpio = W306R_V20_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static void __init w306r_v20_init(void)
-{
- rt305x_register_flash(0);
-
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio),
- w306r_v20_leds_gpio);
- ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(w306r_v20_gpio_buttons),
- w306r_v20_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0",
- w306r_v20_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c
deleted file mode 100644
index 6633ca0288..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * ALFA Networks W502U board support
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define W502U_GPIO_LED_USB 13
-#define W502U_GPIO_LED_WPS 14
-
-#define W502U_GPIO_BUTTON_WPS 0
-#define W502U_GPIO_BUTTON_RESET 10
-
-#define W502U_KEYS_POLL_INTERVAL 20
-#define W502U_KEYS_DEBOUNCE_INTERVAL (3 * W502U_KEYS_POLL_INTERVAL)
-
-static struct gpio_led w502u_leds_gpio[] __initdata = {
- {
- .name = "alfa:blue:usb",
- .gpio = W502U_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "alfa:blue:wps",
- .gpio = W502U_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button w502u_gpio_buttons[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = W502U_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = W502U_GPIO_BUTTON_WPS,
- .active_low = 1,
- },
-};
-
-static void __init w502u_init(void)
-{
- rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
- RT305X_GPIO_MODE_UART0_SHIFT));
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(w502u_leds_gpio),
- w502u_leds_gpio);
- ramips_register_gpio_buttons(-1, W502U_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(w502u_gpio_buttons),
- w502u_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_W502U, "W502U", "ALFA Networks W502U",
- w502u_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c
deleted file mode 100644
index dec1a7bb5b..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Sparklan WCR-150GN board support
- *
- * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define WCR150GN_GPIO_LED_USER 12
-#define WCR150GN_GPIO_LED_POWER 8
-#define WCR150GN_GPIO_BUTTON_WPS 10
-#define WCR150GN_GPIO_BUTTON_RESET 0
-#define WCR150GN_KEYS_POLL_INTERVAL 20
-#define WCR150GN_KEYS_DEBOUNCE_INTERVAL (3 * WCR150GN_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wcr150gn_leds_gpio[] __initdata = {
- {
- .name = "wcr150gn:amber:user",
- .gpio = WCR150GN_GPIO_LED_USER,
- .active_low = 1,
- },
- {
- .name = "wcr150gn:amber:power",
- .gpio = WCR150GN_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wcr150gn_gpio_buttons[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WCR150GN_GPIO_BUTTON_WPS,
- .active_low = 1,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WCR150GN_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static void __init wcr150gn_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio),
- wcr150gn_leds_gpio);
- ramips_register_gpio_buttons(-1, WCR150GN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wcr150gn_gpio_buttons),
- wcr150gn_gpio_buttons);
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN",
- wcr150gn_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c
deleted file mode 100644
index e5adb1909f..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Buffalo WHR-G300N board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define WHR_G300N_GPIO_LED_DIAG 7
-#define WHR_G300N_GPIO_LED_ROUTER 9
-#define WHR_G300N_GPIO_LED_SECURITY 14
-
-#define WHR_G300N_GPIO_BUTTON_AOSS 0 /* active low */
-#define WHR_G300N_GPIO_BUTTON_RESET 10 /* active low */
-#define WHR_G300N_GPIO_BUTTON_ROUTER_ON 8 /* active low */
-#define WHR_G300N_GPIO_BUTTON_ROUTER_OFF 11 /* active low */
-
-#define WHR_G300N_KEYS_POLL_INTERVAL 20
-#define WHR_G300N_KEYS_DEBOUNCE_INTERVAL (3 * WHR_G300N_KEYS_POLL_INTERVAL)
-
-static struct gpio_led whr_g300n_leds_gpio[] __initdata = {
- {
- .name = "whr-g300n:red:diag",
- .gpio = WHR_G300N_GPIO_LED_DIAG,
- .active_low = 1,
- }, {
- .name = "whr-g300n:green:router",
- .gpio = WHR_G300N_GPIO_LED_ROUTER,
- .active_low = 1,
- }, {
- .name = "whr-g300n:amber:security",
- .gpio = WHR_G300N_GPIO_LED_SECURITY,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button whr_g300n_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WHR_G300N_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WHR_G300N_GPIO_BUTTON_AOSS,
- .active_low = 1,
- }, {
- .desc = "router-off",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_OFF,
- .active_low = 1,
- }, {
- .desc = "router-on",
- .type = EV_KEY,
- .code = BTN_3,
- .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_ON,
- .active_low = 1,
- }
-};
-
-static void __init whr_g300n_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio),
- whr_g300n_leds_gpio);
- ramips_register_gpio_buttons(-1, WHR_G300N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(whr_g300n_gpio_buttons),
- whr_g300n_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "WHR-G300N", "Buffalo WHR-G300N",
- whr_g300n_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c
deleted file mode 100644
index b548dfee1d..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Asus WL_330N board support
- *
- * Copyright (C) 2012 Frederic Leroy <fredo@starox.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define WL_330N_GPIO_BUTTON_RESET 10
-#define WL_330N_GPIO_BUTTON_WPS 0
-#define WL_330N_GPIO_LED_LINK 9
-#define WL_330N_GPIO_LED_POWER 11
-#define WL_330N_KEYS_POLL_INTERVAL 20
-#define WL_330N_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N_KEYS_POLL_INTERVAL)
-
-const struct flash_platform_data wl_330n_flash = {
- .type = "mx25l3205d",
-};
-
-struct spi_board_info wl_330n_spi_slave_info[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &wl_330n_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpio_keys_button wl_330n_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL_330N_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL_330N_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wl_330n_leds_gpio[] __initdata = {
- {
- .name = "asus:blue:link",
- .gpio = WL_330N_GPIO_LED_LINK,
- .active_low = 1,
- }, {
- .name = "asus:blue:power",
- .gpio = WL_330N_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static void __init wl_330n_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_spi(wl_330n_spi_slave_info,
- ARRAY_SIZE(wl_330n_spi_slave_info));
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n_leds_gpio),
- wl_330n_leds_gpio);
- ramips_register_gpio_buttons(-1, WL_330N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wl_330n_gpio_buttons),
- wl_330n_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WL_330N, "WL_330N", "Asus WL-330N",
- wl_330n_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c
deleted file mode 100644
index 599b9a9adb..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Asus WL_330N3G board support
- *
- * Copyright (C) 2012 Frederic Leroy <fredo@starox.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define WL_330N3G_GPIO_BUTTON_RESET 10
-#define WL_330N3G_GPIO_BUTTON_WPS 0
-#define WL_330N3G_GPIO_LED_3G_BLUE 9
-#define WL_330N3G_GPIO_LED_3G_RED 13
-#define WL_330N3G_GPIO_LED_POWER 11
-#define WL_330N3G_KEYS_POLL_INTERVAL 20
-#define WL_330N3G_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N3G_KEYS_POLL_INTERVAL)
-
-const struct flash_platform_data wl_330n3g_flash = {
- .type = "mx25l3205d",
-};
-
-struct spi_board_info wl_330n3g_spi_slave_info[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &wl_330n3g_flash,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpio_keys_button wl_330n3g_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL_330N3G_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL_330N3G_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wl_330n3g_leds_gpio[] __initdata = {
- {
- .name = "asus:blue:3g",
- .gpio = WL_330N3G_GPIO_LED_3G_BLUE,
- .active_low = 1,
- }, {
- .name = "asus:red:3g",
- .gpio = WL_330N3G_GPIO_LED_3G_RED,
- .active_low = 1,
- }, {
- .name = "asus:blue:power",
- .gpio = WL_330N3G_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static void __init wl_330n3g_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_spi(wl_330n3g_spi_slave_info,
- ARRAY_SIZE(wl_330n3g_spi_slave_info));
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n3g_leds_gpio),
- wl_330n3g_leds_gpio);
- ramips_register_gpio_buttons(-1, WL_330N3G_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wl_330n3g_gpio_buttons),
- wl_330n3g_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_usb();
- rt305x_register_wdt();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WL_330N3G, "WL_330N3G", "Asus WL-330N3G",
- wl_330n3g_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c
deleted file mode 100644
index 2cd1d5e47a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Sitecom WL341v3 board support
- *
- * Copyright (C) 2012 Marco Antonio Mauro <marcus90@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define WL341V3_GPIO_LED_FIRST_AMBER 9
-#define WL341V3_GPIO_LED_FIRST_BLUE 13
-#define WL341V3_GPIO_LED_THIRD_AMBER 11
-#define WL341V3_GPIO_LED_THIRD_BLUE 14
-#define WL341V3_GPIO_LED_FOURTH_BLUE 10
-#define WL341V3_GPIO_LED_FIFTH_AMBER 12
-#define WL341V3_GPIO_LED_FIFTH_BLUE 8
-
-#define WL341V3_GPIO_BUTTON_WPS 5 /* active low */
-#define WL341V3_GPIO_BUTTON_RESET 7 /* active low */
-
-#define WL341V3_KEYS_POLL_INTERVAL 20
-#define WL341V3_KEYS_DEBOUNCE_INTERVAL (3 * WL341V3_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wl341v3_leds_gpio[] __initdata = {
- {
- .name = "wl341v3:amber:first",
- .gpio = WL341V3_GPIO_LED_FIRST_AMBER,
- .active_low = 1,
- }, {
- .name = "wl341v3:blue:first",
- .gpio = WL341V3_GPIO_LED_FIRST_BLUE,
- .active_low = 1,
- }, {
- .name = "wl341v3:amber:third",
- .gpio = WL341V3_GPIO_LED_THIRD_AMBER,
- .active_low = 1,
- }, {
- .name = "wl341v3:blue:third",
- .gpio = WL341V3_GPIO_LED_THIRD_BLUE,
- .active_low = 1,
- }, {
- .name = "wl341v3:blue:fourth",
- .gpio = WL341V3_GPIO_LED_FOURTH_BLUE,
- .active_low = 1,
- }, {
- .name = "wl341v3:amber:fifth",
- .gpio = WL341V3_GPIO_LED_FIFTH_AMBER,
- .active_low = 1,
- }, {
- .name = "wl341v3:blue:fifth",
- .gpio = WL341V3_GPIO_LED_FIFTH_BLUE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wl341v3_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL341V3_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL341V3_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init wl341v3_init(void)
-{
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wl341v3_leds_gpio),
- wl341v3_leds_gpio);
- ramips_register_gpio_buttons(-1, WL341V3_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wl341v3_gpio_buttons),
- wl341v3_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WL341V3, "WL341V3", "Sitecom WL-341 v3",
- wl341v3_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c
deleted file mode 100644
index 8c0caadb1a..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Sitecom WL-351 v1 002 board support
- *
- * Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define WL351_GPIO_LED_POWER_AMBER 8
-#define WL351_GPIO_LED_UNPOPULATED_AMBER 12
-#define WL351_GPIO_LED_UNPOPULATED_BLUE 13
-
-#define WL351_GPIO_BUTTON_RESET 10
-#define WL351_GPIO_BUTTON_WPS 0
-
-#define WL351_KEYS_POLL_INTERVAL 20
-#define WL351_KEYS_DEBOUNCE_INTERVAL (3 * WL351_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wl351_leds_gpio[] __initdata = {
- {
- .name = "wl-351:amber:power",
- .gpio = WL351_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- }, {
- .name = "wl-351:amber:unpopulated",
- .gpio = WL351_GPIO_LED_UNPOPULATED_AMBER,
- .active_low = 1,
- }, {
- .name = "wl-351:blue:unpopulated",
- .gpio = WL351_GPIO_LED_UNPOPULATED_BLUE,
- .active_low = 1,
- }
-};
-
-
-static struct gpio_keys_button wl351_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL351_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WL351_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_platform_data wl351_switch_data = {
- .gpio_sda = RT305X_GPIO_I2C_SD,
- .gpio_sck = RT305X_GPIO_I2C_SCLK,
-};
-
-static struct platform_device wl351_switch = {
- .name = RTL8366RB_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wl351_switch_data,
- }
-};
-
-static void __init wl351_init(void)
-{
- rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
- RT305X_GPIO_MODE_UART0_SHIFT) |
- RT305X_GPIO_MODE_I2C |
- RT305X_GPIO_MODE_SPI |
- RT305X_GPIO_MODE_MDIO);
-
- rt305x_register_flash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio),
- wl351_leds_gpio);
- ramips_register_gpio_buttons(-1, WL351_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wl351_gpio_buttons),
- wl351_gpio_buttons);
- /* External RTL8366RB. */
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
- rt305x_esw_data.reg_initval_fct2 = 0x0002500c;
- /*
- * ext phy base addr 31, rx/tx clock skew 0,
- * turbo mii off, rgmi 3.3v off, port 5 polling off
- * port5: enabled, gige, full-duplex, rx/tx-flow-control
- * port6: enabled, gige, full-duplex, rx/tx-flow-control
- */
- rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff;
- rt305x_register_ethernet();
- platform_device_register(&wl351_switch);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002",
- wl351_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c
deleted file mode 100644
index eed752353d..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Unbranded router from DX board support
- * Also known as *WR512*-3GN by local vendors
- * e.g. WS-WR512N1, Sin Hon SH-WR512NU, and etc
- * (http://www.dealextreme.com/p/portable-wireless-n-3g-router-cdma2000-evdo-td-scdma-hspa-wcdma-45639)
- * This router is also known to be rebranded and sold by a number of local
- * vendors in several countries.
- *
- * Copyright (C) 2011 Andrew Andrianov <necromant@necromant.ath.cx>
- * Based on MOFI3500-3N code by
- * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-
-#define WR512_3GN_GPIO_LED_3G 9
-#define WR512_3GN_GPIO_LED_GATEWAY 11
-#define WR512_3GN_GPIO_LED_AP 12
-#define WR512_3GN_GPIO_LED_STATION 13
-#define WR512_3GN_GPIO_LED_WPS 14
-
-#define WR512_3GN_GPIO_BUTTON_RESET 10
-#define WR512_3GN_GPIO_BUTTON_CONNECT 7
-#define WR512_3GN_GPIO_BUTTON_WPS 0
-#define WR512_3GN_GPIO_BUTTON_WPS2 8
-
-#define WR512_3GN_KEYS_POLL_INTERVAL 20
-#define WR512_3GN_KEYS_DEBOUNCE_INTERVAL (3 * WR512_3GN_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wr512_3gn_leds_gpio[] __initdata = {
- {
- .name = "wr512:green:3g",
- .gpio = WR512_3GN_GPIO_LED_3G,
- .active_low = 1,
- }, {
- .name = "wr512:green:gateway",
- .gpio = WR512_3GN_GPIO_LED_GATEWAY,
- .active_low = 1,
- }, {
- .name = "wr512:green:ap",
- .gpio = WR512_3GN_GPIO_LED_AP,
- .active_low = 1,
- }, {
- .name = "wr512:green:wps",
- .gpio = WR512_3GN_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "wr512:green:station",
- .gpio = WR512_3GN_GPIO_LED_STATION,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wr512_3gn_gpio_buttons[] __initdata = {
- {
- .desc = "reset_wps",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WR512_3GN_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "mode",
- .type = EV_KEY,
- .code = KEY_M,
- .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WR512_3GN_GPIO_BUTTON_CONNECT,
- .active_low = 1,
- }
-};
-
-#define WR512_3GN_GPIO_MODE \
- ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
- RT305X_GPIO_MODE_MDIO)
-
-static void __init wr512_3gn_init(void)
-{
- rt305x_gpio_init(WR512_3GN_GPIO_MODE);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
- rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wr512_3gn_leds_gpio),
- wr512_3gn_leds_gpio);
- ramips_register_gpio_buttons(-1, WR512_3GN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wr512_3gn_gpio_buttons),
- wr512_3gn_gpio_buttons);
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WR512_3GN, "WR512-3GN", "WR512-3GN-like router",
- wr512_3gn_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c
deleted file mode 100644
index 591d9ceb59..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * AWB WR6202 board support
- *
- * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include<linux/init.h>
-#include<linux/platform_device.h>
-#include<linux/gpio.h>
-
-#include<asm/mach-ralink/machine.h>
-#include<asm/mach-ralink/dev-gpio-buttons.h>
-#include<asm/mach-ralink/dev-gpio-leds.h>
-#include<asm/mach-ralink/rt305x.h>
-#include<asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define WR6202_GPIO_BUTTON_RESET 10 /* active low */
-#define WR6202_GPIO_BUTTON_WPS 0 /* active low */
-
-#define WR6202_KEYS_POLL_INTERVAL 20
-#define WR6202_KEYS_DEBOUNCE_INTERVAL (3 * WR6202_KEYS_POLL_INTERVAL)
-
-#define WR6202_GPIO_USB_POWER 11
-
-#define WR6202_GPIO_LED_3G 13
-#define WR6202_GPIO_LED_WPS 14
-
-static struct gpio_led wr6202_leds_gpio[] __initdata = {
- {
- .name = "wr6202:blue:wps",
- .gpio = WR6202_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "wr6202:blue:3g",
- .gpio = WR6202_GPIO_LED_3G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wr6202_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WR6202_GPIO_BUTTON_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WR6202_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static void __init wr6202_init(void)
-{
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
-
- rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio),
- wr6202_leds_gpio);
- ramips_register_gpio_buttons(-1, WR6202_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wr6202_gpio_buttons),
- wr6202_gpio_buttons);
-
- /* Power to the USB port is controlled by GPIO line */
- gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER");
- gpio_direction_output(WR6202_GPIO_USB_POWER, 0);
- gpio_free(WR6202_GPIO_USB_POWER);
-
- rt305x_register_flash(0);
-
- rt305x_register_ethernet();
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202",
- wr6202_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c
deleted file mode 100644
index f7ef353262..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Unknown router name/model, PCB marked with XDX-RN502J
- *
- * Copyright (C) 2011 Bruno Schwander bruno@tinkerbox.org
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-#include "devices.h"
-
-#define XDXRN502J_GPIO_BUTTON_RESET 12
-#define XDXRN502J_GPIO_LED_WIFI 7
-#define XDXRN502J_GPIO_LED_POWER 9
-
-#define XDXRN502J_BUTTONS_POLL_INTERVAL 20
-#define XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL (3 * XDXRN502J_BUTTONS_POLL_INTERVAL)
-
-
-static struct gpio_led xdxrn502j_leds_gpio[] __initdata = {
- {
- .name = "xdxrn502j:green:wifi",
- .gpio = XDXRN502J_GPIO_LED_WIFI,
- .active_low = 1,
- }, {
- .name = "xdxrn502j:green:power",
- .gpio = XDXRN502J_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button xdxrn502j_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL,
- .gpio = XDXRN502J_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-#define XDXRN502J_GPIO_MODE \
- ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
- RT305X_GPIO_MODE_MDIO)
-
-static void __init xdxrn502j_init(void)
-{
- rt305x_gpio_init(XDXRN502J_GPIO_MODE);
-
- rt305x_register_flash(0);
-
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
- rt305x_register_ethernet();
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(xdxrn502j_leds_gpio),
- xdxrn502j_leds_gpio);
-
- ramips_register_gpio_buttons(-1, XDXRN502J_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(xdxrn502j_gpio_buttons),
- xdxrn502j_gpio_buttons);
-
- rt305x_register_wifi();
- rt305x_register_wdt();
- rt305x_register_usb();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_XDXRN502J, "XDXRN502J", "XDX RN502J",
- xdxrn502j_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c
deleted file mode 100644
index 8a7a58b7d5..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Ralink RT305x SoC specific setup
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mipsregs.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/ramips_gpio.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-
-void __iomem * rt305x_sysc_base;
-void __iomem * rt305x_memc_base;
-enum rt305x_soc_type rt305x_soc;
-
-static unsigned long rt5350_get_mem_size(void)
-{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
- unsigned long ret;
- u32 t;
-
- t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
- t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
- RT5350_SYSCFG0_DRAM_SIZE_MASK;
-
- switch (t) {
- case RT5350_SYSCFG0_DRAM_SIZE_2M:
- ret = 2 * 1024 * 1024;
- break;
- case RT5350_SYSCFG0_DRAM_SIZE_8M:
- ret = 8 * 1024 * 1024;
- break;
- case RT5350_SYSCFG0_DRAM_SIZE_16M:
- ret = 16 * 1024 * 1024;
- break;
- case RT5350_SYSCFG0_DRAM_SIZE_32M:
- ret = 32 * 1024 * 1024;
- break;
- case RT5350_SYSCFG0_DRAM_SIZE_64M:
- ret = 64 * 1024 * 1024;
- break;
- default:
- panic("rt5350: invalid DRAM size: %u", t);
- break;
- }
-
- return ret;
-}
-
-void __init ramips_soc_prom_init(void)
-{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
- const char *name = "unknown";
- u32 n0;
- u32 n1;
- u32 id;
-
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-
- if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
- unsigned long icache_sets;
-
- icache_sets = (read_c0_config1() >> 22) & 7;
- if (icache_sets == 1) {
- rt305x_soc = RT305X_SOC_RT3050;
- name = "RT3050";
- } else {
- rt305x_soc = RT305X_SOC_RT3052;
- name = "RT3052";
- }
- } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
- rt305x_soc = RT305X_SOC_RT3350;
- name = "RT3350";
- } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
- rt305x_soc = RT305X_SOC_RT3352;
- name = "RT3352";
- } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
- rt305x_soc = RT305X_SOC_RT5350;
- name = "RT5350";
- } else {
- panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
- }
-
- id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
-
- snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN,
- "Ralink %s id:%u rev:%u",
- name,
- (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
- (id & CHIP_ID_REV_MASK));
-
- ramips_mem_base = RT305X_SDRAM_BASE;
-
- if (soc_is_rt5350()) {
- ramips_get_mem_size = rt5350_get_mem_size;
- } else if (soc_is_rt305x() || soc_is_rt3350() ) {
- ramips_mem_size_min = RT305X_MEM_SIZE_MIN;
- ramips_mem_size_max = RT305X_MEM_SIZE_MAX;
- } else if (soc_is_rt3352()) {
- ramips_mem_size_min = RT3352_MEM_SIZE_MIN;
- ramips_mem_size_max = RT3352_MEM_SIZE_MAX;
- } else {
- BUG();
- }
-}
-
-static struct ramips_gpio_chip rt305x_gpio_chips[] = {
- {
- .chip = {
- .label = "RT305X-GPIO0",
- .base = 0,
- .ngpio = 24,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x00,
- [RAMIPS_GPIO_REG_EDGE] = 0x04,
- [RAMIPS_GPIO_REG_RENA] = 0x08,
- [RAMIPS_GPIO_REG_FENA] = 0x0c,
- [RAMIPS_GPIO_REG_DATA] = 0x20,
- [RAMIPS_GPIO_REG_DIR] = 0x24,
- [RAMIPS_GPIO_REG_POL] = 0x28,
- [RAMIPS_GPIO_REG_SET] = 0x2c,
- [RAMIPS_GPIO_REG_RESET] = 0x30,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x34,
- },
- .map_base = RT305X_PIO_BASE,
- .map_size = RT305X_PIO_SIZE,
- },
- {
- .chip = {
- .label = "RT305X-GPIO1",
- .base = 24,
- .ngpio = 16,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x38,
- [RAMIPS_GPIO_REG_EDGE] = 0x3c,
- [RAMIPS_GPIO_REG_RENA] = 0x40,
- [RAMIPS_GPIO_REG_FENA] = 0x44,
- [RAMIPS_GPIO_REG_DATA] = 0x48,
- [RAMIPS_GPIO_REG_DIR] = 0x4c,
- [RAMIPS_GPIO_REG_POL] = 0x50,
- [RAMIPS_GPIO_REG_SET] = 0x54,
- [RAMIPS_GPIO_REG_RESET] = 0x58,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x5c,
- },
- .map_base = RT305X_PIO_BASE,
- .map_size = RT305X_PIO_SIZE,
- },
- {
- .chip = {
- .label = "RT305X-GPIO2",
- .base = 40,
- .ngpio = 12,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x60,
- [RAMIPS_GPIO_REG_EDGE] = 0x64,
- [RAMIPS_GPIO_REG_RENA] = 0x68,
- [RAMIPS_GPIO_REG_FENA] = 0x6c,
- [RAMIPS_GPIO_REG_DATA] = 0x70,
- [RAMIPS_GPIO_REG_DIR] = 0x74,
- [RAMIPS_GPIO_REG_POL] = 0x78,
- [RAMIPS_GPIO_REG_SET] = 0x7c,
- [RAMIPS_GPIO_REG_RESET] = 0x80,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x84,
- },
- .map_base = RT305X_PIO_BASE,
- .map_size = RT305X_PIO_SIZE,
- },
-};
-
-static struct ramips_gpio_data rt305x_gpio_data = {
- .chips = rt305x_gpio_chips,
- .num_chips = ARRAY_SIZE(rt305x_gpio_chips),
-};
-
-static void rt305x_gpio_reserve(int first, int last)
-{
- for (; first <= last; first++)
- gpio_request(first, "reserved");
-}
-
-void __init rt305x_gpio_init(u32 mode)
-{
- u32 t;
-
- rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE);
-
- ramips_gpio_init(&rt305x_gpio_data);
- if ((mode & RT305X_GPIO_MODE_I2C) == 0)
- rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK);
-
- if ((mode & RT305X_GPIO_MODE_SPI) == 0)
- rt305x_gpio_reserve(RT305X_GPIO_SPI_EN, RT305X_GPIO_SPI_CLK);
-
- t = mode >> RT305X_GPIO_MODE_UART0_SHIFT;
- t &= RT305X_GPIO_MODE_UART0_MASK;
- switch (t) {
- case RT305X_GPIO_MODE_UARTF:
- case RT305X_GPIO_MODE_PCM_UARTF:
- case RT305X_GPIO_MODE_PCM_I2S:
- case RT305X_GPIO_MODE_I2S_UARTF:
- rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_14);
- break;
- case RT305X_GPIO_MODE_PCM_GPIO:
- rt305x_gpio_reserve(RT305X_GPIO_10, RT305X_GPIO_14);
- break;
- case RT305X_GPIO_MODE_GPIO_UARTF:
- case RT305X_GPIO_MODE_GPIO_I2S:
- rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_10);
- break;
- }
-
- if ((mode & RT305X_GPIO_MODE_UART1) == 0)
- rt305x_gpio_reserve(RT305X_GPIO_UART1_TXD,
- RT305X_GPIO_UART1_RXD);
-
- if ((mode & RT305X_GPIO_MODE_JTAG) == 0)
- rt305x_gpio_reserve(RT305X_GPIO_JTAG_TDO, RT305X_GPIO_JTAG_TDI);
-
- if ((mode & RT305X_GPIO_MODE_MDIO) == 0)
- rt305x_gpio_reserve(RT305X_GPIO_MDIO_MDC,
- RT305X_GPIO_MDIO_MDIO);
-
- if ((mode & RT305X_GPIO_MODE_SDRAM) == 0)
- rt305x_gpio_reserve(RT305X_GPIO_SDRAM_MD16,
- RT305X_GPIO_SDRAM_MD31);
-
- if ((mode & RT305X_GPIO_MODE_RGMII) == 0)
- rt305x_gpio_reserve(RT305X_GPIO_GE0_TXD0,
- RT305X_GPIO_GE0_RXCLK);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c
deleted file mode 100644
index 5a069db454..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Ralink RT305x SoC specific setup
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mips_machine.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-#include "common.h"
-
-static void rt305x_restart(char *command)
-{
- rt305x_sysc_wr(RT305X_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
- while (1)
- if (cpu_wait)
- cpu_wait();
-}
-
-static void rt305x_halt(void)
-{
- while (1)
- if (cpu_wait)
- cpu_wait();
-}
-
-unsigned int __cpuinit get_c0_compare_irq(void)
-{
- return CP0_LEGACY_COMPARE_IRQ;
-}
-
-void __init ramips_soc_setup(void)
-{
- struct clk *clk;
-
- rt305x_sysc_base = ioremap_nocache(RT305X_SYSC_BASE, PAGE_SIZE);
- rt305x_memc_base = ioremap_nocache(RT305X_MEMC_BASE, PAGE_SIZE);
-
- rt305x_clocks_init();
-
- clk = clk_get(NULL, "cpu");
- if (IS_ERR(clk))
- panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
- printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
- clk_get_rate(clk) / 1000000,
- (clk_get_rate(clk) % 1000000) * 100 / 1000000);
-
- _machine_restart = rt305x_restart;
- _machine_halt = rt305x_halt;
- pm_power_off = rt305x_halt;
-
- clk = clk_get(NULL, "uart");
- if (IS_ERR(clk))
- panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
-
- ramips_early_serial_setup(0, RT305X_UART0_BASE, clk_get_rate(clk),
- RT305X_INTC_IRQ_UART0);
- ramips_early_serial_setup(1, RT305X_UART1_BASE, clk_get_rate(clk),
- RT305X_INTC_IRQ_UART1);
-}
-
-void __init plat_time_init(void)
-{
- struct clk *clk;
-
- clk = clk_get(NULL, "cpu");
- if (IS_ERR(clk))
- panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
- mips_hpt_frequency = clk_get_rate(clk) / 2;
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig
deleted file mode 100644
index 57823f0c67..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-if RALINK_RT3883
-
-menu "Ralink RT3662/RT3883 machine selection"
-
-config RT3883_MACH_RT_N56U
- bool "Asus RT-N56U support"
- select HW_HAS_PCI
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT3883_MACH_DIR_645
- bool "D-Link DIR-645 support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT3883_MACH_OMNI_EMB_HPM
- bool "Omnima EMB HPM board support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT3883_MACH_TEW_691GR
- bool "TRENDnet TEW-691GR support"
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-config RT3883_MACH_TEW_692GR
- bool "TRENDnet TEW-692GR support"
- select HW_HAS_PCI
- select RALINK_DEV_GPIO_BUTTONS
- select RALINK_DEV_GPIO_LEDS
-
-endmenu
-
-endif
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile
deleted file mode 100644
index e1ab61e814..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the Ralink RT3662/RT3883 SoC specific parts of the kernel
-#
-# Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-
-obj-y := irq.o setup.o devices.o rt3883.o clock.o
-
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-obj-$(CONFIG_RT3883_MACH_DIR_645) += mach-dir-645.o
-obj-$(CONFIG_RT3883_MACH_OMNI_EMB_HPM) += mach-omni-emb-hpm.o
-obj-$(CONFIG_RT3883_MACH_RT_N56U) += mach-rt-n56u.o
-obj-$(CONFIG_RT3883_MACH_TEW_691GR) += mach-tew-691gr.o
-obj-$(CONFIG_RT3883_MACH_TEW_692GR) += mach-tew-692gr.o
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c
deleted file mode 100644
index bf70259cae..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Ralink RT3662/RT3883 clock API
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include "common.h"
-
-struct clk {
- unsigned long rate;
-};
-
-static struct clk rt3883_cpu_clk;
-static struct clk rt3883_sys_clk;
-static struct clk rt3883_wdt_clk;
-static struct clk rt3883_uart_clk;
-
-void __init rt3883_clocks_init(void)
-{
- u32 syscfg0;
- u32 clksel;
- u32 ddr2;
-
- syscfg0 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG0);
- clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
- RT3883_SYSCFG0_CPUCLK_MASK);
- ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
-
- switch (clksel) {
- case RT3883_SYSCFG0_CPUCLK_250:
- rt3883_cpu_clk.rate = 250000000;
- rt3883_sys_clk.rate = (ddr2) ? 125000000 : 83000000;
- break;
- case RT3883_SYSCFG0_CPUCLK_384:
- rt3883_cpu_clk.rate = 384000000;
- rt3883_sys_clk.rate = (ddr2) ? 128000000 : 96000000;
- break;
- case RT3883_SYSCFG0_CPUCLK_480:
- rt3883_cpu_clk.rate = 480000000;
- rt3883_sys_clk.rate = (ddr2) ? 160000000 : 120000000;
- break;
- case RT3883_SYSCFG0_CPUCLK_500:
- rt3883_cpu_clk.rate = 500000000;
- rt3883_sys_clk.rate = (ddr2) ? 166000000 : 125000000;
- break;
- }
-
- rt3883_wdt_clk.rate = rt3883_sys_clk.rate;
- rt3883_uart_clk.rate = 40000000;
-}
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "sys"))
- return &rt3883_sys_clk;
-
- if (!strcmp(id, "cpu"))
- return &rt3883_cpu_clk;
-
- if (!strcmp(id, "wdt"))
- return &rt3883_wdt_clk;
-
- if (!strcmp(id, "uart"))
- return &rt3883_uart_clk;
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h
deleted file mode 100644
index a389dccce0..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC common defines
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT3883_COMMON_H
-#define _RT3883_COMMON_H
-
-void rt3883_clocks_init(void);
-
-#endif /* _RT3883_COMMON_H */ \ No newline at end of file
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c
deleted file mode 100644
index 6077e97dda..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC platform device registration
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/rt2x00_platform.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include <asm/mach-ralink/ramips_nand_platform.h>
-#include "devices.h"
-
-#include <ramips_eth_platform.h>
-
-static struct resource rt3883_flash0_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = RT3883_BOOT_BASE,
- .end = RT3883_BOOT_BASE + RT3883_BOOT_SIZE - 1,
- },
-};
-
-struct physmap_flash_data rt3883_flash0_data;
-static struct platform_device rt3883_flash0_device = {
- .name = "physmap-flash",
- .resource = rt3883_flash0_resources,
- .num_resources = ARRAY_SIZE(rt3883_flash0_resources),
- .dev = {
- .platform_data = &rt3883_flash0_data,
- },
-};
-
-static struct resource rt3883_flash1_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = RT3883_SRAM_BASE,
- .end = RT3883_SRAM_BASE + RT3883_SRAM_SIZE - 1,
- },
-};
-
-struct physmap_flash_data rt3883_flash1_data;
-static struct platform_device rt3883_flash1_device = {
- .name = "physmap-flash",
- .resource = rt3883_flash1_resources,
- .num_resources = ARRAY_SIZE(rt3883_flash1_resources),
- .dev = {
- .platform_data = &rt3883_flash1_data,
- },
-};
-
-static int rt3883_flash_instance __initdata;
-void __init rt3883_register_pflash(unsigned int id)
-{
- struct platform_device *pdev;
- struct physmap_flash_data *pdata;
- void __iomem *fscc_base;
- u32 t;
- int reg;
-
- switch (id) {
- case 0:
- pdev = &rt3883_flash0_device;
- reg = RT3883_FSCC_REG_FLASH_CFG0;
- break;
- case 1:
- pdev = &rt3883_flash1_device;
- reg = RT3883_FSCC_REG_FLASH_CFG1;
- break;
- default:
- return;
- }
-
- pdata = pdev->dev.platform_data;
-
- fscc_base = ioremap(RT3883_FSCC_BASE, RT3883_FSCC_SIZE);
- if (!fscc_base)
- panic("RT3883: ioremap failed for FSCC");
-
- t = __raw_readl(fscc_base + reg);
- iounmap(fscc_base);
-
- t = (t >> RT3883_FLASH_CFG_WIDTH_SHIFT) & RT3883_FLASH_CFG_WIDTH_MASK;
- switch (t) {
- case RT3883_FLASH_CFG_WIDTH_8BIT:
- pdata->width = 1;
- break;
- case RT3883_FLASH_CFG_WIDTH_16BIT:
- pdata->width = 2;
- break;
- case RT3883_FLASH_CFG_WIDTH_32BIT:
- if (id == 1) {
- pdata->width = 4;
- break;
- }
- /* fallthrough */
- default:
- pr_warn("RT3883: flash bank%d: invalid width detected\n", id);
- return;
- }
-
- pdev->id = rt3883_flash_instance;
-
- platform_device_register(pdev);
- rt3883_flash_instance++;
-}
-
-static atomic_t rt3883_usb_pwr_ref = ATOMIC_INIT(0);
-
-static int rt3883_usb_power_on(struct platform_device *pdev)
-{
-
- if (atomic_inc_return(&rt3883_usb_pwr_ref) == 1) {
- u32 t;
-
- t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS);
-
- /* enable clock for port0's and port1's phys */
- t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1);
- t |= RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN;
- rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1);
- mdelay(500);
-
- /* pull USBHOST and USBDEV out from reset */
- t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
- t &= ~(RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV);
- rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL);
- mdelay(500);
-
- /* enable host mode */
- t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1);
- t |= RT3883_SYSCFG1_USB0_HOST_MODE;
- rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1);
-
- t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS);
- }
-
- return 0;
-}
-
-static void rt3883_usb_power_off(struct platform_device *pdev)
-{
- if (atomic_dec_return(&rt3883_usb_pwr_ref) == 0) {
- u32 t;
-
- /* put USBHOST and USBDEV into reset */
- t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
- t |= RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV;
- rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL);
- udelay(10000);
-
- /* disable clock for port0's and port1's phys*/
- t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1);
- t &= ~(RT3883_CLKCFG1_UPHY0_CLK_EN |
- RT3883_CLKCFG1_UPHY1_CLK_EN);
- rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1);
- udelay(10000);
- }
-}
-
-static struct usb_ehci_pdata rt3883_ehci_data = {
- .power_on = rt3883_usb_power_on,
- .power_off = rt3883_usb_power_off,
-};
-
-static struct resource rt3883_ehci_resources[] = {
- {
- .start = RT3883_EHCI_BASE,
- .end = RT3883_EHCI_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT3883_INTC_IRQ_UHST,
- .end = RT3883_INTC_IRQ_UHST,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 rt3883_ehci_dmamask = DMA_BIT_MASK(32);
-static struct platform_device rt3883_ehci_device = {
- .name = "ehci-platform",
- .id = -1,
- .resource = rt3883_ehci_resources,
- .num_resources = ARRAY_SIZE(rt3883_ehci_resources),
- .dev = {
- .dma_mask = &rt3883_ehci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &rt3883_ehci_data,
- },
-};
-
-static struct resource rt3883_ohci_resources[] = {
- {
- .start = RT3883_OHCI_BASE,
- .end = RT3883_OHCI_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT3883_INTC_IRQ_UHST,
- .end = RT3883_INTC_IRQ_UHST,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata rt3883_ohci_data = {
- .power_on = rt3883_usb_power_on,
- .power_off = rt3883_usb_power_off,
-};
-
-static u64 rt3883_ohci_dmamask = DMA_BIT_MASK(32);
-static struct platform_device rt3883_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .resource = rt3883_ohci_resources,
- .num_resources = ARRAY_SIZE(rt3883_ohci_resources),
- .dev = {
- .dma_mask = &rt3883_ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &rt3883_ohci_data,
- },
-};
-
-void __init rt3883_register_usbhost(void)
-{
- platform_device_register(&rt3883_ehci_device);
- platform_device_register(&rt3883_ohci_device);
-}
-
-static void rt3883_fe_reset(void)
-{
- u32 t;
-
- t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
- t |= RT3883_RSTCTRL_FE;
- rt3883_sysc_wr(t , RT3883_SYSC_REG_RSTCTRL);
-
- t &= ~RT3883_RSTCTRL_FE;
- rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL);
-}
-
-static struct resource rt3883_eth_resources[] = {
- {
- .start = RT3883_FE_BASE,
- .end = RT3883_FE_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT3883_CPU_IRQ_FE,
- .end = RT3883_CPU_IRQ_FE,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct ramips_eth_platform_data rt3883_eth_data = {
- .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
- .reset_fe = rt3883_fe_reset,
- .min_pkt_len = 64,
-};
-
-static struct platform_device rt3883_eth_device = {
- .name = "ramips_eth",
- .resource = rt3883_eth_resources,
- .num_resources = ARRAY_SIZE(rt3883_eth_resources),
- .dev = {
- .platform_data = &rt3883_eth_data,
- }
-};
-
-void __init rt3883_register_ethernet(void)
-{
- struct clk *clk;
-
- clk = clk_get(NULL, "sys");
- if (IS_ERR(clk))
- panic("unable to get SYS clock, err=%ld", PTR_ERR(clk));
-
- rt3883_eth_data.sys_freq = clk_get_rate(clk);
-
- platform_device_register(&rt3883_eth_device);
-}
-
-static struct resource rt3883_wlan_resources[] = {
- {
- .start = RT3883_WLAN_BASE,
- .end = RT3883_WLAN_BASE + 0x3FFFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RT3883_CPU_IRQ_WLAN,
- .end = RT3883_CPU_IRQ_WLAN,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct rt2x00_platform_data rt3883_wlan_data;
-static struct platform_device rt3883_wlan_device = {
- .name = "rt2800_wmac",
- .resource = rt3883_wlan_resources,
- .num_resources = ARRAY_SIZE(rt3883_wlan_resources),
- .dev = {
- .platform_data = &rt3883_wlan_data,
- }
-};
-
-void __init rt3883_register_wlan(void)
-{
- rt3883_wlan_data.eeprom_file_name = "soc_wmac.eeprom",
- platform_device_register(&rt3883_wlan_device);
-}
-
-static struct resource rt3883_wdt_resources[] = {
- {
- .start = RT3883_TIMER_BASE,
- .end = RT3883_TIMER_BASE + RT3883_TIMER_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rt3883_wdt_device = {
- .name = "ramips-wdt",
- .id = -1,
- .resource = rt3883_wdt_resources,
- .num_resources = ARRAY_SIZE(rt3883_wdt_resources),
-};
-
-void __init rt3883_register_wdt(bool enable_reset)
-{
- if (enable_reset) {
- u32 t;
-
- /* enable WDT reset output on GPIO 2 */
- t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1);
- t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
- rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1);
- }
-
- platform_device_register(&rt3883_wdt_device);
-}
-
-static struct resource rt3883_nand_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = RT3883_NANDC_BASE,
- .end = RT3883_NANDC_BASE + RT3883_NANDC_SIZE - 1,
- },
-};
-
-struct ramips_nand_platform_data rt3883_nand_data;
-static struct platform_device rt3883_nand_device = {
- .name = RAMIPS_NAND_DRIVER_NAME,
- .id = -1,
- .resource = rt3883_nand_resources,
- .num_resources = ARRAY_SIZE(rt3883_nand_resources),
- .dev = {
- .platform_data = &rt3883_nand_data,
- },
-};
-
-void __init rt3883_register_nand(void)
-{
- platform_device_register(&rt3883_nand_device);
-}
-
-static struct resource rt3883_spi_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = RT3883_SPI_BASE,
- .end = RT3883_SPI_BASE + RT3883_SPI_SIZE - 1,
- },
-};
-
-static struct platform_device rt3883_spi_device = {
- .name = "ramips-spi",
- .id = 0,
- .resource = rt3883_spi_resources,
- .num_resources = ARRAY_SIZE(rt3883_spi_resources),
-};
-
-void __init rt3883_register_spi(struct spi_board_info *info, int n)
-{
- spi_register_board_info(info, n);
- platform_device_register(&rt3883_spi_device);
-}
-
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h
deleted file mode 100644
index 808bcb2d36..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Ralink RT3662/3883 SoC specific platform device definitions
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _RT3883_DEVICES_H
-#define _RT3883_DEVICES_H
-
-struct physmap_flash_data;
-struct spi_board_info;
-
-extern struct physmap_flash_data rt3883_flash0_data;
-extern struct physmap_flash_data rt3883_flash1_data;
-void rt3883_register_pflash(unsigned int id);
-
-extern struct ramips_nand_platform_data rt3883_nand_data;
-void rt3883_register_nand(void);
-
-extern struct ramips_eth_platform_data rt3883_eth_data;
-void rt3883_register_ethernet(void);
-void rt3883_register_usbhost(void);
-
-extern struct rt2x00_platform_data rt3883_wlan_data;
-void rt3883_register_wlan(void);
-void rt3883_register_wdt(bool enable_reset);
-
-void rt3883_register_spi(struct spi_board_info *info, int n);
-
-#endif /* _RT3883_DEVICES_H */
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c
deleted file mode 100644
index e3bf7ba339..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC early printk support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/serial_reg.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-ralink/rt3883_regs.h>
-
-#define UART_READ(r) \
- __raw_readl((void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r)))
-
-#define UART_WRITE(r, v) \
- __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r)))
-
-void prom_putchar(unsigned char ch)
-{
- while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0);
- UART_WRITE(RT3883_UART_REG_TX, ch);
- while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c
deleted file mode 100644
index b561fd38cd..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC specific interrupt handling
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-
-static void rt3883_intc_irq_dispatch(void)
-{
- u32 pending;
-
- pending = ramips_intc_get_status();
-
- if (pending & RT3883_INTC_INT_TIMER0)
- do_IRQ(RT3883_INTC_IRQ_TIMER0);
-
- else if (pending & RT3883_INTC_INT_TIMER1)
- do_IRQ(RT3883_INTC_IRQ_TIMER1);
-
- else if (pending & RT3883_INTC_INT_UART0)
- do_IRQ(RT3883_INTC_IRQ_UART0);
-
- else if (pending & RT3883_INTC_INT_UART1)
- do_IRQ(RT3883_INTC_IRQ_UART1);
-
- else if (pending & RT3883_INTC_INT_PERFC)
- do_IRQ(RT3883_INTC_IRQ_PERFC);
-
- else if (pending & RT3883_INTC_INT_UHST)
- do_IRQ(RT3883_INTC_IRQ_UHST);
-
- /* TODO: handle PIO interrupts as well */
-
- else
- spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending;
-
- pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(RT3883_CPU_IRQ_COUNTER);
-
- else if (pending & STATUSF_IP5)
- do_IRQ(RT3883_CPU_IRQ_FE);
-
- else if (pending & STATUSF_IP6)
- do_IRQ(RT3883_CPU_IRQ_WLAN);
-
- else if (pending & STATUSF_IP4)
- do_IRQ(RT3883_CPU_IRQ_PCI);
-
- else if (pending & STATUSF_IP2)
- rt3883_intc_irq_dispatch();
-
- else
- spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
- ramips_intc_irq_init(RT3883_INTC_BASE, RT3883_CPU_IRQ_INTC,
- RT3883_INTC_IRQ_BASE);
- cp0_perfcount_irq = RT3883_INTC_IRQ_PERFC;
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c
deleted file mode 100644
index 825da27f77..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * D-Link DIR-645 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/rtl8367.h>
-#include <linux/ethtool.h>
-#include <linux/rt2x00_platform.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define DIR_645_GPIO_LED_INET 0
-#define DIR_645_GPIO_LED_WPS 26
-
-#define DIR_645_GPIO_BUTTON_RESET 9
-#define DIR_645_GPIO_BUTTON_WPS 14
-
-#define DIR_645_GPIO_USB_POWER 30
-
-#define DIR_645_GPIO_RTL8367_SCK 2
-#define DIR_645_GPIO_RTL8367_SDA 1
-
-#define DIR_645_KEYS_POLL_INTERVAL 20
-#define DIR_645_KEYS_DEBOUNCE_INTERVAL (3 * DIR_645_KEYS_POLL_INTERVAL)
-
-static struct gpio_led dir_645_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:inet",
- .gpio = DIR_645_GPIO_LED_INET,
- .active_low = 1,
- },
- {
- .name = "d-link:green:wps",
- .gpio = DIR_645_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dir_645_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_645_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_645_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8367_extif_config dir_645_rtl8367_extif1_cfg = {
- .txdelay = 1,
- .rxdelay = 0,
- .mode = RTL8367_EXTIF_MODE_RGMII,
- .ability = {
- .force_mode = 1,
- .txpause = 1,
- .rxpause = 1,
- .link = 1,
- .duplex = 1,
- .speed = RTL8367_PORT_SPEED_1000,
- }
-};
-
-static struct rtl8367_platform_data dir_645_rtl8367_data = {
- .gpio_sda = DIR_645_GPIO_RTL8367_SDA,
- .gpio_sck = DIR_645_GPIO_RTL8367_SCK,
- .extif1_cfg = &dir_645_rtl8367_extif1_cfg,
-};
-
-static struct platform_device dir_645_rtl8367_device = {
- .name = RTL8367B_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &dir_645_rtl8367_data,
- }
-};
-
-static struct spi_board_info dir_645_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }
-};
-
-static void __init dir_645_gpio_init(void)
-{
- rt3883_gpio_init(RT3883_GPIO_MODE_I2C |
- RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) |
- RT3883_GPIO_MODE_JTAG |
- RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC));
-
- gpio_request_one(DIR_645_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-}
-
-static void __init dir_645_init(void)
-{
- dir_645_gpio_init();
-
- rt3883_register_spi(dir_645_spi_info,
- ARRAY_SIZE(dir_645_spi_info));
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_645_leds_gpio),
- dir_645_leds_gpio);
-
- ramips_register_gpio_buttons(-1, DIR_645_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_645_gpio_buttons),
- dir_645_gpio_buttons);
-
- platform_device_register(&dir_645_rtl8367_device);
-
- rt3883_wlan_data.disable_5ghz = 1;
- rt3883_register_wlan();
-
- rt3883_eth_data.speed = SPEED_1000;
- rt3883_eth_data.duplex = DUPLEX_FULL;
- rt3883_eth_data.tx_fc = 1;
- rt3883_eth_data.rx_fc = 1;
- rt3883_register_ethernet();
-
- rt3883_register_wdt(false);
- rt3883_register_usbhost();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_DIR_645, "DIR-645", "D-Link DIR-645", dir_645_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c
deleted file mode 100644
index 77ccff624f..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Omnima EMB HPM board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/rt2x00_platform.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define OMNI_EMB_HPM_GPIO_LED_POWER 7
-#define OMNI_EMB_HPM_GPIO_LED_ETH_GREEN 20
-#define OMNI_EMB_HPM_GPIO_LED_ETH_RED 18
-#define OMNI_EMB_HPM_GPIO_LED_STATUS 21
-#define OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN 17
-#define OMNI_EMB_HPM_GPIO_LED_WIFI_RED 19
-
-#define OMNI_EMB_HPM_GPIO_BUTTON_RESET 14
-
-#define OMNI_EMB_HPM_GPIO_USB0_ENABLE 2
-#define OMNI_EMB_HPM_GPIO_USB1_ENABLE 1
-#define OMNI_EMB_HPM_GPIO_USB0_OC 12
-#define OMNI_EMB_HPM_GPIO_USB1_OC 13
-
-#define OMNI_EMB_HPM_KEYS_POLL_INTERVAL 20
-#define OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_HPM_KEYS_POLL_INTERVAL)
-
-static struct gpio_led omni_emb_hpm_leds_gpio[] __initdata = {
- {
- .name = "emb:orange:power",
- .gpio = OMNI_EMB_HPM_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "emb:green:status",
- .gpio = OMNI_EMB_HPM_GPIO_LED_STATUS,
- },
- {
- .name = "emb:green:eth",
- .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_GREEN,
- .active_low = 1,
- },
- {
- .name = "emb:red:eth",
- .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_RED,
- .active_low = 1,
- },
- {
- .name = "emb:green:wifi",
- .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN,
- .active_low = 1,
- },
- {
- .name = "emb:red:wifi",
- .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_RED,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button omni_emb_hpm_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OMNI_EMB_HPM_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
-};
-
-static struct spi_board_info omni_emb_hpm_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }
-};
-
-
-static void __init omni_emb_hpm_gpio_request(unsigned int gpio,
- unsigned long flags,
- const char *label,
- bool free)
-{
- int err;
-
- err = gpio_request_one(gpio, flags, label);
- if (err) {
- pr_err("EMB_HPM: can't setup GPIO%u (%s), err=%d\n",
- gpio, label, err);
- return;
- }
-
- if (free)
- gpio_free(gpio);
-}
-
-static void __init omni_emb_hpm_gpio_init(void)
-{
- rt3883_gpio_init(RT3883_GPIO_MODE_I2C |
- RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) |
- RT3883_GPIO_MODE_JTAG);
-
- omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_ENABLE,
- GPIOF_OUT_INIT_HIGH,
- "USB0 power", true);
- omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_ENABLE,
- GPIOF_OUT_INIT_HIGH,
- "USB1 power", true);
- omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_OC,
- GPIOF_IN, "USB0 OC", false);
- omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_OC,
- GPIOF_IN, "USB1 OC", false);
-}
-
-static void __init omni_emb_hpm_init(void)
-{
- omni_emb_hpm_gpio_init();
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_hpm_leds_gpio),
- omni_emb_hpm_leds_gpio);
-
- ramips_register_gpio_buttons(-1, OMNI_EMB_HPM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(omni_emb_hpm_gpio_buttons),
- omni_emb_hpm_gpio_buttons);
-
- rt3883_register_spi(omni_emb_hpm_spi_info,
- ARRAY_SIZE(omni_emb_hpm_spi_info));
-
- rt3883_register_wlan();
-
- rt3883_eth_data.phy_mask = BIT(4);
- rt3883_register_ethernet();
-
- rt3883_register_wdt(false);
- rt3883_register_usbhost();
-}
-
-MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB_HPM, "OMNI-EMB-HPM", "Omnima EMB HPM",
- omni_emb_hpm_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c
deleted file mode 100644
index 99aa03fe9e..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Asus RT-N56U board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/rtl8367.h>
-#include <linux/ethtool.h>
-#include <linux/pci.h>
-#include <linux/rt2x00_platform.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define RT_N56U_GPIO_LED_POWER 0
-#define RT_N56U_GPIO_LED_LAN 19
-#define RT_N56U_GPIO_LED_USB 24
-#define RT_N56U_GPIO_LED_WAN 27
-#define RT_N56U_GPIO_BUTTON_RESET 13
-#define RT_N56U_GPIO_BUTTON_WPS 26
-
-#define RT_N56U_GPIO_RTL8367_SCK 2
-#define RT_N56U_GPIO_RTL8367_SDA 1
-
-#define RT_N56U_KEYS_POLL_INTERVAL 20
-#define RT_N56U_KEYS_DEBOUNCE_INTERVAL (3 * RT_N56U_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rt_n56u_leds_gpio[] __initdata = {
- {
- .name = "asus:blue:power",
- .gpio = RT_N56U_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "asus:blue:lan",
- .gpio = RT_N56U_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "asus:blue:wan",
- .gpio = RT_N56U_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "asus:blue:usb",
- .gpio = RT_N56U_GPIO_LED_USB,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button rt_n56u_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_N56U_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RT_N56U_GPIO_BUTTON_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8367_extif_config rt_n56u_rtl8367_extif1_cfg = {
- .txdelay = 1,
- .rxdelay = 0,
- .mode = RTL8367_EXTIF_MODE_RGMII,
- .ability = {
- .force_mode = 1,
- .txpause = 1,
- .rxpause = 1,
- .link = 1,
- .duplex = 1,
- .speed = RTL8367_PORT_SPEED_1000,
- }
-};
-
-static struct rtl8367_platform_data rt_n56u_rtl8367_data = {
- .gpio_sda = RT_N56U_GPIO_RTL8367_SDA,
- .gpio_sck = RT_N56U_GPIO_RTL8367_SCK,
- .extif1_cfg = &rt_n56u_rtl8367_extif1_cfg,
-};
-
-static struct platform_device rt_n56u_rtl8367_device = {
- .name = RTL8367_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &rt_n56u_rtl8367_data,
- }
-};
-
-static struct rt2x00_platform_data rt_n56u_pci_wlan_data = {
- .eeprom_file_name = "rt2x00pci_1_0.eeprom",
-};
-
-static int rt_n56u_pci_plat_dev_init(struct pci_dev *dev)
-{
- if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0)
- dev->dev.platform_data = &rt_n56u_pci_wlan_data;
-
- return 0;
-}
-
-static void __init rt_n56u_init(void)
-{
- rt3883_gpio_init(RT3883_GPIO_MODE_I2C |
- RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) |
- RT3883_GPIO_MODE_JTAG |
- RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC));
-
- rt3883_register_pflash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n56u_leds_gpio),
- rt_n56u_leds_gpio);
-
- ramips_register_gpio_buttons(-1, RT_N56U_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rt_n56u_gpio_buttons),
- rt_n56u_gpio_buttons);
-
- platform_device_register(&rt_n56u_rtl8367_device);
-
- rt3883_wlan_data.disable_2ghz = 1;
- rt3883_register_wlan();
-
- rt3883_eth_data.speed = SPEED_1000;
- rt3883_eth_data.duplex = DUPLEX_FULL;
- rt3883_eth_data.tx_fc = 1;
- rt3883_eth_data.rx_fc = 1;
- rt3883_register_ethernet();
-
- rt3883_register_wdt(false);
- rt3883_register_usbhost();
- rt3883_pci_set_plat_dev_init(rt_n56u_pci_plat_dev_init);
- rt3883_pci_init(RT3883_PCI_MODE_PCIE);
-}
-
-MIPS_MACHINE(RAMIPS_MACH_RT_N56U, "RT-N56U", "Asus RT-N56U", rt_n56u_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c
deleted file mode 100644
index 7b553ab6b2..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * TRENDnet TEW-691GR board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/rt2x00_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define TEW_691GR_GPIO_LED_WPS_GREEN 9
-
-#define TEW_691GR_GPIO_BUTTON_RESET 10
-#define TEW_691GR_GPIO_BUTTON_WPS 26
-
-#define TEW_691GR_GPIO_SWITCH_RFKILL 0
-
-#define TEW_691GR_KEYS_POLL_INTERVAL 20
-#define TEW_691GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_691GR_KEYS_POLL_INTERVAL)
-
-static struct gpio_led tew_691gr_leds_gpio[] __initdata = {
- {
- .name = "trendnet:green:wps",
- .gpio = TEW_691GR_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tew_691gr_gpio_buttons[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_691GR_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_691GR_GPIO_BUTTON_WPS,
- .active_low = 1,
- },
- {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_691GR_GPIO_SWITCH_RFKILL,
- .active_low = 1,
- },
-};
-
-static void __init tew_691gr_init(void)
-{
- rt3883_gpio_init(RT3883_GPIO_MODE_I2C |
- RT3883_GPIO_MODE_SPI |
- RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) |
- RT3883_GPIO_MODE_JTAG |
- RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC));
-
- rt3883_register_pflash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_691gr_leds_gpio),
- tew_691gr_leds_gpio);
-
- ramips_register_gpio_buttons(-1, TEW_691GR_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew_691gr_gpio_buttons),
- tew_691gr_gpio_buttons);
-
- rt3883_wlan_data.disable_5ghz = 1;
- rt3883_register_wlan();
-
- rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- rt3883_eth_data.phy_mask = BIT(0);
- rt3883_eth_data.tx_fc = 1;
- rt3883_eth_data.rx_fc = 1;
- rt3883_register_ethernet();
-
- rt3883_register_wdt(false);
-}
-
-MIPS_MACHINE(RAMIPS_MACH_TEW_691GR, "TEW-691GR", "TRENDnet TEW-691GR",
- tew_691gr_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c
deleted file mode 100644
index 59b520a371..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * TRENDnet TEW-692GR board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/rt2x00_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev-gpio-buttons.h>
-#include <asm/mach-ralink/dev-gpio-leds.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include <asm/mach-ralink/ramips_eth_platform.h>
-
-#include "devices.h"
-
-#define TEW_692GR_GPIO_LED_WPS_ORANGE 9
-#define TEW_692GR_GPIO_LED_WPS_GREEN 28
-
-#define TEW_692GR_GPIO_BUTTON_RESET 10
-#define TEW_692GR_GPIO_BUTTON_WPS 26
-
-#define TEW_692GR_KEYS_POLL_INTERVAL 20
-#define TEW_692GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_692GR_KEYS_POLL_INTERVAL)
-
-static struct gpio_led tew_692gr_leds_gpio[] __initdata = {
- {
- .name = "trendnet:orange:wps",
- .gpio = TEW_692GR_GPIO_LED_WPS_ORANGE,
- .active_low = 1,
- },
- {
- .name = "trendnet:green:wps",
- .gpio = TEW_692GR_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tew_692gr_gpio_buttons[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_692GR_GPIO_BUTTON_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_692GR_GPIO_BUTTON_WPS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg tew_692gr_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_pad_cfg tew_692gr_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .rxclk_delay_en = true,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_led_cfg tew_692gr_ar8327_led_cfg = {
- .led_ctrl0 = 0xc437c437,
- .led_ctrl1 = 0xc337c337,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x03ffff00,
- .open_drain = false,
-};
-
-static struct ar8327_platform_data tew_692gr_ar8327_data = {
- .pad0_cfg = &tew_692gr_ar8327_pad0_cfg,
- .pad6_cfg = &tew_692gr_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &tew_692gr_ar8327_led_cfg,
-};
-
-static struct mdio_board_info tew_692gr_mdio0_info[] = {
- {
- .bus_id = "ramips_mdio",
- .phy_addr = 0,
- .platform_data = &tew_692gr_ar8327_data,
- },
-};
-
-static void __init tew_692gr_init(void)
-{
- rt3883_gpio_init(RT3883_GPIO_MODE_I2C |
- RT3883_GPIO_MODE_SPI |
- RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) |
- RT3883_GPIO_MODE_JTAG |
- RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC));
-
- rt3883_register_pflash(0);
-
- ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_692gr_leds_gpio),
- tew_692gr_leds_gpio);
-
- ramips_register_gpio_buttons(-1, TEW_692GR_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew_692gr_gpio_buttons),
- tew_692gr_gpio_buttons);
-
- rt3883_wlan_data.disable_5ghz = 1;
- rt3883_register_wlan();
-
- mdiobus_register_board_info(tew_692gr_mdio0_info,
- ARRAY_SIZE(tew_692gr_mdio0_info));
-
- rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- rt3883_eth_data.phy_mask = BIT(0);
- rt3883_eth_data.tx_fc = 1;
- rt3883_eth_data.rx_fc = 1;
- rt3883_register_ethernet();
-
- rt3883_register_wdt(false);
-
- rt3883_pci_init(RT3883_PCI_MODE_PCIE);
-}
-
-MIPS_MACHINE(RAMIPS_MACH_TEW_692GR, "TEW-692GR", "TRENDnet TEW-692GR",
- tew_692gr_init);
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c
deleted file mode 100644
index e397b854ea..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC specific setup
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/ramips_gpio.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-
-void __iomem * rt3883_sysc_base;
-void __iomem * rt3883_memc_base;
-
-void __init ramips_soc_prom_init(void)
-{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
- u32 n0;
- u32 n1;
- u32 id;
-
- n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
- n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
- id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
-
- snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN,
- "Ralink %c%c%c%c%c%c%c%c ver:%u eco:%u",
- (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff),
- (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff),
- (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff),
- (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff),
- (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
- (id & RT3883_REVID_ECO_ID_MASK));
-
- ramips_mem_base = RT3883_SDRAM_BASE;
- ramips_mem_size_min = RT3883_MEM_SIZE_MIN;
- ramips_mem_size_max = RT3883_MEM_SIZE_MAX;
-}
-
-static struct ramips_gpio_chip rt3883_gpio_chips[] = {
- {
- .chip = {
- .label = "RT3883-GPIO0",
- .base = 0,
- .ngpio = 24,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x00,
- [RAMIPS_GPIO_REG_EDGE] = 0x04,
- [RAMIPS_GPIO_REG_RENA] = 0x08,
- [RAMIPS_GPIO_REG_FENA] = 0x0c,
- [RAMIPS_GPIO_REG_DATA] = 0x20,
- [RAMIPS_GPIO_REG_DIR] = 0x24,
- [RAMIPS_GPIO_REG_POL] = 0x28,
- [RAMIPS_GPIO_REG_SET] = 0x2c,
- [RAMIPS_GPIO_REG_RESET] = 0x30,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x34,
- },
- .map_base = RT3883_PIO_BASE,
- .map_size = RT3883_PIO_SIZE,
- },
- {
- .chip = {
- .label = "RT3883-GPIO1",
- .base = 24,
- .ngpio = 16,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x38,
- [RAMIPS_GPIO_REG_EDGE] = 0x3c,
- [RAMIPS_GPIO_REG_RENA] = 0x40,
- [RAMIPS_GPIO_REG_FENA] = 0x44,
- [RAMIPS_GPIO_REG_DATA] = 0x48,
- [RAMIPS_GPIO_REG_DIR] = 0x4c,
- [RAMIPS_GPIO_REG_POL] = 0x50,
- [RAMIPS_GPIO_REG_SET] = 0x54,
- [RAMIPS_GPIO_REG_RESET] = 0x58,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x5c,
- },
- .map_base = RT3883_PIO_BASE,
- .map_size = RT3883_PIO_SIZE,
- },
- {
- .chip = {
- .label = "RT3883-GPIO2",
- .base = 40,
- .ngpio = 32,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x60,
- [RAMIPS_GPIO_REG_EDGE] = 0x64,
- [RAMIPS_GPIO_REG_RENA] = 0x68,
- [RAMIPS_GPIO_REG_FENA] = 0x6c,
- [RAMIPS_GPIO_REG_DATA] = 0x70,
- [RAMIPS_GPIO_REG_DIR] = 0x74,
- [RAMIPS_GPIO_REG_POL] = 0x78,
- [RAMIPS_GPIO_REG_SET] = 0x7c,
- [RAMIPS_GPIO_REG_RESET] = 0x80,
- [RAMIPS_GPIO_REG_TOGGLE] = 0x84,
- },
- .map_base = RT3883_PIO_BASE,
- .map_size = RT3883_PIO_SIZE,
- },
- {
- .chip = {
- .label = "RT3883-GPIO3",
- .base = 72,
- .ngpio = 24,
- },
- .regs = {
- [RAMIPS_GPIO_REG_INT] = 0x88,
- [RAMIPS_GPIO_REG_EDGE] = 0x8c,
- [RAMIPS_GPIO_REG_RENA] = 0x90,
- [RAMIPS_GPIO_REG_FENA] = 0x94,
- [RAMIPS_GPIO_REG_DATA] = 0x98,
- [RAMIPS_GPIO_REG_DIR] = 0x9c,
- [RAMIPS_GPIO_REG_POL] = 0xa0,
- [RAMIPS_GPIO_REG_SET] = 0xa4,
- [RAMIPS_GPIO_REG_RESET] = 0xa8,
- [RAMIPS_GPIO_REG_TOGGLE] = 0xac,
- },
- .map_base = RT3883_PIO_BASE,
- .map_size = RT3883_PIO_SIZE,
- },
-};
-
-static struct ramips_gpio_data rt3883_gpio_data = {
- .chips = rt3883_gpio_chips,
- .num_chips = ARRAY_SIZE(rt3883_gpio_chips),
-};
-
-static void rt3883_gpio_reserve(int first, int last)
-{
- for (; first <= last; first++)
- gpio_request(first, "reserved");
-}
-
-void __init rt3883_gpio_init(u32 mode)
-{
- u32 t;
-
- rt3883_sysc_wr(mode, RT3883_SYSC_REG_GPIO_MODE);
-
- ramips_gpio_init(&rt3883_gpio_data);
- if ((mode & RT3883_GPIO_MODE_I2C) == 0)
- rt3883_gpio_reserve(RT3883_GPIO_I2C_SD, RT3883_GPIO_I2C_SCLK);
-
- if ((mode & RT3883_GPIO_MODE_SPI) == 0)
- rt3883_gpio_reserve(RT3883_GPIO_SPI_CS0, RT3883_GPIO_SPI_MISO);
-
- t = mode >> RT3883_GPIO_MODE_UART0_SHIFT;
- t &= RT3883_GPIO_MODE_UART0_MASK;
- switch (t) {
- case RT3883_GPIO_MODE_UARTF:
- case RT3883_GPIO_MODE_PCM_UARTF:
- case RT3883_GPIO_MODE_PCM_I2S:
- case RT3883_GPIO_MODE_I2S_UARTF:
- rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_14);
- break;
- case RT3883_GPIO_MODE_PCM_GPIO:
- rt3883_gpio_reserve(RT3883_GPIO_11, RT3883_GPIO_14);
- break;
- case RT3883_GPIO_MODE_GPIO_UARTF:
- case RT3883_GPIO_MODE_GPIO_I2S:
- rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_10);
- break;
- }
-
- if ((mode & RT3883_GPIO_MODE_UART1) == 0)
- rt3883_gpio_reserve(RT3883_GPIO_UART1_TXD,
- RT3883_GPIO_UART1_RXD);
-
- if ((mode & RT3883_GPIO_MODE_JTAG) == 0)
- rt3883_gpio_reserve(RT3883_GPIO_JTAG_TDO,
- RT3883_GPIO_JTAG_TCLK);
-
- if ((mode & RT3883_GPIO_MODE_MDIO) == 0)
- rt3883_gpio_reserve(RT3883_GPIO_MDIO_MDC,
- RT3883_GPIO_MDIO_MDIO);
-
- if ((mode & RT3883_GPIO_MODE_GE1) == 0)
- rt3883_gpio_reserve(RT3883_GPIO_GE1_TXD0,
- RT3883_GPIO_GE1_RXCLK);
-
- if ((mode & RT3883_GPIO_MODE_GE2) == 0)
- rt3883_gpio_reserve(RT3883_GPIO_GE2_TXD0,
- RT3883_GPIO_GE2_RXCLK);
-
- t = mode >> RT3883_GPIO_MODE_PCI_SHIFT;
- t &= RT3883_GPIO_MODE_PCI_MASK;
- if (t != RT3883_GPIO_MODE_PCI_GPIO)
- rt3883_gpio_reserve(RT3883_GPIO_PCI_AD0,
- RT3883_GPIO_PCI_AD31);
-
- t = mode >> RT3883_GPIO_MODE_LNA_A_SHIFT;
- t &= RT3883_GPIO_MODE_LNA_A_MASK;
- if (t != RT3883_GPIO_MODE_LNA_A_GPIO)
- rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_A0,
- RT3883_GPIO_LNA_PE_A2);
-
- t = mode >> RT3883_GPIO_MODE_LNA_G_SHIFT;
- t &= RT3883_GPIO_MODE_LNA_G_MASK;
- if (t != RT3883_GPIO_MODE_LNA_G_GPIO)
- rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_G0,
- RT3883_GPIO_LNA_PE_G2);
-}
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c
deleted file mode 100644
index 6e037a7291..0000000000
--- a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Ralink RT3662/RT3883 SoC specific setup
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mips_machine.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt3883.h>
-#include <asm/mach-ralink/rt3883_regs.h>
-#include "common.h"
-
-static void rt3883_restart(char *command)
-{
- rt3883_sysc_wr(RT3883_RSTCTRL_SYS, RT3883_SYSC_REG_RSTCTRL);
- while (1)
- if (cpu_wait)
- cpu_wait();
-}
-
-static void rt3883_halt(void)
-{
- while (1)
- if (cpu_wait)
- cpu_wait();
-}
-
-unsigned int __cpuinit get_c0_compare_irq(void)
-{
- return CP0_LEGACY_COMPARE_IRQ;
-}
-
-void __init ramips_soc_setup(void)
-{
- struct clk *clk;
-
- rt3883_sysc_base = ioremap_nocache(RT3883_SYSC_BASE, PAGE_SIZE);
- rt3883_memc_base = ioremap_nocache(RT3883_MEMC_BASE, PAGE_SIZE);
-
- rt3883_clocks_init();
-
- clk = clk_get(NULL, "cpu");
- if (IS_ERR(clk))
- panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
- printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
- clk_get_rate(clk) / 1000000,
- (clk_get_rate(clk) % 1000000) * 100 / 1000000);
-
- _machine_restart = rt3883_restart;
- _machine_halt = rt3883_halt;
- pm_power_off = rt3883_halt;
-
- clk = clk_get(NULL, "uart");
- if (IS_ERR(clk))
- panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
-
- ramips_early_serial_setup(0, RT3883_UART0_BASE, clk_get_rate(clk),
- RT3883_INTC_IRQ_UART0);
- ramips_early_serial_setup(1, RT3883_UART1_BASE, clk_get_rate(clk),
- RT3883_INTC_IRQ_UART1);
-}
-
-void __init plat_time_init(void)
-{
- struct clk *clk;
-
- clk = clk_get(NULL, "cpu");
- if (IS_ERR(clk))
- panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
- mips_hpt_frequency = clk_get_rate(clk) / 2;
-}
diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Kconfig b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Kconfig
deleted file mode 100644
index 1bc4c2bb08..0000000000
--- a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-config NET_RAMIPS
- tristate "Ralink RT288X/RT3X5X/RT3662/RT3883 ethernet driver"
- depends on MIPS_RALINK
- select PHYLIB if (SOC_RT288X || SOC_RT3883)
- select SWCONFIG if SOC_RT305X
- help
- This driver supports the etehrnet mac inside the ralink wisocs
-
-if NET_RAMIPS
-
-config NET_RAMIPS_DEBUG
- bool "Enable debug messages in the Ralink ethernet driver"
-
-config NET_RAMIPS_DEBUG_FS
- bool "Enable debugfs support for the Ralink ethernet driver"
- depends on DEBUG_FS
-
-endif
diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Makefile b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Makefile
deleted file mode 100644
index 22c460d4df..0000000000
--- a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the Ramips SoCs built-in ethernet macs
-#
-
-ramips-y += ramips_main.o
-
-ramips-$(CONFIG_NET_RAMIPS_DEBUG_FS) += ramips_debugfs.o
-
-obj-$(CONFIG_NET_RAMIPS) += ramips.o
diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_debugfs.c b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_debugfs.c
deleted file mode 100644
index 20afcf5028..0000000000
--- a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_debugfs.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Ralink SoC ethernet driver debugfs code
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/debugfs.h>
-#include <linux/module.h>
-#include <linux/phy.h>
-
-#include "ramips_eth.h"
-
-static struct dentry *raeth_debugfs_root;
-
-static int raeth_debugfs_generic_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-void raeth_debugfs_update_int_stats(struct raeth_priv *re, u32 status)
-{
- re->debug.int_stats.total += !!status;
-
- re->debug.int_stats.rx_delayed += !!(status & RAMIPS_RX_DLY_INT);
- re->debug.int_stats.rx_done0 += !!(status & RAMIPS_RX_DONE_INT0);
- re->debug.int_stats.rx_coherent += !!(status & RAMIPS_RX_COHERENT);
-
- re->debug.int_stats.tx_delayed += !!(status & RAMIPS_TX_DLY_INT);
- re->debug.int_stats.tx_done0 += !!(status & RAMIPS_TX_DONE_INT0);
- re->debug.int_stats.tx_done1 += !!(status & RAMIPS_TX_DONE_INT1);
- re->debug.int_stats.tx_done2 += !!(status & RAMIPS_TX_DONE_INT2);
- re->debug.int_stats.tx_done3 += !!(status & RAMIPS_TX_DONE_INT3);
- re->debug.int_stats.tx_coherent += !!(status & RAMIPS_TX_COHERENT);
-
- re->debug.int_stats.pse_fq_empty += !!(status & RAMIPS_PSE_FQ_EMPTY);
- re->debug.int_stats.pse_p0_fc += !!(status & RAMIPS_PSE_P0_FC);
- re->debug.int_stats.pse_p1_fc += !!(status & RAMIPS_PSE_P1_FC);
- re->debug.int_stats.pse_p2_fc += !!(status & RAMIPS_PSE_P2_FC);
- re->debug.int_stats.pse_buf_drop += !!(status & RAMIPS_PSE_BUF_DROP);
-}
-
-static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
-#define PR_INT_STAT(_label, _field) \
- len += snprintf(buf + len, sizeof(buf) - len, \
- "%-18s: %10lu\n", _label, re->debug.int_stats._field);
-
- struct raeth_priv *re = file->private_data;
- char buf[512];
- unsigned int len = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&re->page_lock, flags);
-
- PR_INT_STAT("RX Delayed", rx_delayed);
- PR_INT_STAT("RX Done 0", rx_done0);
- PR_INT_STAT("RX Coherent", rx_coherent);
-
- PR_INT_STAT("TX Delayed", tx_delayed);
- PR_INT_STAT("TX Done 0", tx_done0);
- PR_INT_STAT("TX Done 1", tx_done1);
- PR_INT_STAT("TX Done 2", tx_done2);
- PR_INT_STAT("TX Done 3", tx_done3);
- PR_INT_STAT("TX Coherent", tx_coherent);
-
- PR_INT_STAT("PSE FQ empty", pse_fq_empty);
- PR_INT_STAT("CDMA Flow control", pse_p0_fc);
- PR_INT_STAT("GDMA1 Flow control", pse_p1_fc);
- PR_INT_STAT("GDMA2 Flow control", pse_p2_fc);
- PR_INT_STAT("PSE discard", pse_buf_drop);
-
- len += snprintf(buf + len, sizeof(buf) - len, "\n");
- PR_INT_STAT("Total", total);
-
- spin_unlock_irqrestore(&re->page_lock, flags);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-#undef PR_INT_STAT
-}
-
-static const struct file_operations raeth_fops_int_stats = {
- .open = raeth_debugfs_generic_open,
- .read = read_file_int_stats,
- .owner = THIS_MODULE
-};
-
-void raeth_debugfs_exit(struct raeth_priv *re)
-{
- debugfs_remove_recursive(re->debug.debugfs_dir);
-}
-
-int raeth_debugfs_init(struct raeth_priv *re)
-{
- re->debug.debugfs_dir = debugfs_create_dir(re->netdev->name,
- raeth_debugfs_root);
- if (!re->debug.debugfs_dir)
- return -ENOMEM;
-
- debugfs_create_file("int_stats", S_IRUGO, re->debug.debugfs_dir,
- re, &raeth_fops_int_stats);
-
- return 0;
-}
-
-int raeth_debugfs_root_init(void)
-{
- if (raeth_debugfs_root)
- return -EBUSY;
-
- raeth_debugfs_root = debugfs_create_dir("raeth", NULL);
- if (!raeth_debugfs_root)
- return -ENOENT;
-
- return 0;
-}
-
-void raeth_debugfs_root_exit(void)
-{
- debugfs_remove(raeth_debugfs_root);
- raeth_debugfs_root = NULL;
-}
diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_esw.c b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_esw.c
deleted file mode 100644
index d3150d7a6f..0000000000
--- a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_esw.c
+++ /dev/null
@@ -1,1132 +0,0 @@
-#include <linux/ioport.h>
-#include <linux/switch.h>
-#include <linux/mii.h>
-
-#include <rt305x_regs.h>
-#include <rt305x_esw_platform.h>
-
-/*
- * HW limitations for this switch:
- * - No large frame support (PKT_MAX_LEN at most 1536)
- * - Can't have untagged vlan and tagged vlan on one port at the same time,
- * though this might be possible using the undocumented PPE.
- */
-
-#define RT305X_ESW_REG_FCT0 0x08
-#define RT305X_ESW_REG_PFC1 0x14
-#define RT305X_ESW_REG_ATS 0x24
-#define RT305X_ESW_REG_ATS0 0x28
-#define RT305X_ESW_REG_ATS1 0x2c
-#define RT305X_ESW_REG_ATS2 0x30
-#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n))
-#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n))
-#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n))
-#define RT305X_ESW_REG_POA 0x80
-#define RT305X_ESW_REG_FPA 0x84
-#define RT305X_ESW_REG_SOCPC 0x8c
-#define RT305X_ESW_REG_POC0 0x90
-#define RT305X_ESW_REG_POC1 0x94
-#define RT305X_ESW_REG_POC2 0x98
-#define RT305X_ESW_REG_SGC 0x9c
-#define RT305X_ESW_REG_STRT 0xa0
-#define RT305X_ESW_REG_PCR0 0xc0
-#define RT305X_ESW_REG_PCR1 0xc4
-#define RT305X_ESW_REG_FPA2 0xc8
-#define RT305X_ESW_REG_FCT2 0xcc
-#define RT305X_ESW_REG_SGC2 0xe4
-#define RT305X_ESW_REG_P0LED 0xa4
-#define RT305X_ESW_REG_P1LED 0xa8
-#define RT305X_ESW_REG_P2LED 0xac
-#define RT305X_ESW_REG_P3LED 0xb0
-#define RT305X_ESW_REG_P4LED 0xb4
-#define RT305X_ESW_REG_P0PC 0xe8
-#define RT305X_ESW_REG_P1PC 0xec
-#define RT305X_ESW_REG_P2PC 0xf0
-#define RT305X_ESW_REG_P3PC 0xf4
-#define RT305X_ESW_REG_P4PC 0xf8
-#define RT305X_ESW_REG_P5PC 0xfc
-
-#define RT305X_ESW_LED_LINK 0
-#define RT305X_ESW_LED_100M 1
-#define RT305X_ESW_LED_DUPLEX 2
-#define RT305X_ESW_LED_ACTIVITY 3
-#define RT305X_ESW_LED_COLLISION 4
-#define RT305X_ESW_LED_LINKACT 5
-#define RT305X_ESW_LED_DUPLCOLL 6
-#define RT305X_ESW_LED_10MACT 7
-#define RT305X_ESW_LED_100MACT 8
-/* Additional led states not in datasheet: */
-#define RT305X_ESW_LED_BLINK 10
-#define RT305X_ESW_LED_ON 12
-
-#define RT305X_ESW_LINK_S 25
-#define RT305X_ESW_DUPLEX_S 9
-#define RT305X_ESW_SPD_S 0
-
-#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
-#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
-#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8
-
-#define RT305X_ESW_PCR1_WT_DONE BIT(0)
-
-#define RT305X_ESW_ATS_TIMEOUT (5 * HZ)
-#define RT305X_ESW_PHY_TIMEOUT (5 * HZ)
-
-#define RT305X_ESW_PVIDC_PVID_M 0xfff
-#define RT305X_ESW_PVIDC_PVID_S 12
-
-#define RT305X_ESW_VLANI_VID_M 0xfff
-#define RT305X_ESW_VLANI_VID_S 12
-
-#define RT305X_ESW_VMSC_MSC_M 0xff
-#define RT305X_ESW_VMSC_MSC_S 8
-
-#define RT305X_ESW_SOCPC_DISUN2CPU_S 0
-#define RT305X_ESW_SOCPC_DISMC2CPU_S 8
-#define RT305X_ESW_SOCPC_DISBC2CPU_S 16
-#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25)
-
-#define RT305X_ESW_POC0_EN_BP_S 0
-#define RT305X_ESW_POC0_EN_FC_S 8
-#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16
-#define RT305X_ESW_POC0_DIS_PORT_M 0x7f
-#define RT305X_ESW_POC0_DIS_PORT_S 23
-
-#define RT305X_ESW_POC2_UNTAG_EN_M 0xff
-#define RT305X_ESW_POC2_UNTAG_EN_S 0
-#define RT305X_ESW_POC2_ENAGING_S 8
-#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16
-
-#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f
-#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0
-#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f
-#define RT305X_ESW_SGC2_LAN_PMAP_S 24
-
-#define RT305X_ESW_PFC1_EN_VLAN_M 0xff
-#define RT305X_ESW_PFC1_EN_VLAN_S 16
-#define RT305X_ESW_PFC1_EN_TOS_S 24
-
-#define RT305X_ESW_VLAN_NONE 0xfff
-
-#define RT305X_ESW_PORT0 0
-#define RT305X_ESW_PORT1 1
-#define RT305X_ESW_PORT2 2
-#define RT305X_ESW_PORT3 3
-#define RT305X_ESW_PORT4 4
-#define RT305X_ESW_PORT5 5
-#define RT305X_ESW_PORT6 6
-
-#define RT305X_ESW_PORTS_NONE 0
-
-#define RT305X_ESW_PMAP_LLLLLL 0x3f
-#define RT305X_ESW_PMAP_LLLLWL 0x2f
-#define RT305X_ESW_PMAP_WLLLLL 0x3e
-
-#define RT305X_ESW_PORTS_INTERNAL \
- (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \
- BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \
- BIT(RT305X_ESW_PORT4))
-
-#define RT305X_ESW_PORTS_NOCPU \
- (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
-
-#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6)
-
-#define RT305X_ESW_PORTS_ALL \
- (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
-
-#define RT305X_ESW_NUM_VLANS 16
-#define RT305X_ESW_NUM_VIDS 4096
-#define RT305X_ESW_NUM_PORTS 7
-#define RT305X_ESW_NUM_LANWAN 6
-#define RT305X_ESW_NUM_LEDS 5
-
-enum {
- /* Global attributes. */
- RT305X_ESW_ATTR_ENABLE_VLAN,
- RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
- /* Port attributes. */
- RT305X_ESW_ATTR_PORT_DISABLE,
- RT305X_ESW_ATTR_PORT_DOUBLETAG,
- RT305X_ESW_ATTR_PORT_UNTAG,
- RT305X_ESW_ATTR_PORT_LED,
- RT305X_ESW_ATTR_PORT_LAN,
- RT305X_ESW_ATTR_PORT_RECV_BAD,
- RT305X_ESW_ATTR_PORT_RECV_GOOD,
-};
-
-struct rt305x_esw_port {
- bool disable;
- bool doubletag;
- bool untag;
- u8 led;
- u16 pvid;
-};
-
-struct rt305x_esw_vlan {
- u8 ports;
- u16 vid;
-};
-
-struct rt305x_esw {
- void __iomem *base;
- struct rt305x_esw_platform_data *pdata;
- /* Protects against concurrent register rmw operations. */
- spinlock_t reg_rw_lock;
-
- struct switch_dev swdev;
- bool global_vlan_enable;
- bool alt_vlan_disable;
- struct rt305x_esw_vlan vlans[RT305X_ESW_NUM_VLANS];
- struct rt305x_esw_port ports[RT305X_ESW_NUM_PORTS];
-
-};
-
-static inline void
-rt305x_esw_wr(struct rt305x_esw *esw, u32 val, unsigned reg)
-{
- __raw_writel(val, esw->base + reg);
-}
-
-static inline u32
-rt305x_esw_rr(struct rt305x_esw *esw, unsigned reg)
-{
- return __raw_readl(esw->base + reg);
-}
-
-static inline void
-rt305x_esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
- unsigned long val)
-{
- unsigned long t;
-
- t = __raw_readl(esw->base + reg) & ~mask;
- __raw_writel(t | val, esw->base + reg);
-}
-
-static void
-rt305x_esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
- unsigned long val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&esw->reg_rw_lock, flags);
- rt305x_esw_rmw_raw(esw, reg, mask, val);
- spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
-}
-
-static u32
-rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register,
- u32 write_data)
-{
- unsigned long t_start = jiffies;
- int ret = 0;
-
- while (1) {
- if (!(rt305x_esw_rr(esw, RT305X_ESW_REG_PCR1) &
- RT305X_ESW_PCR1_WT_DONE))
- break;
- if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
- ret = 1;
- goto out;
- }
- }
-
- write_data &= 0xffff;
- rt305x_esw_wr(esw,
- (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
- (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
- (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
- RT305X_ESW_REG_PCR0);
-
- t_start = jiffies;
- while (1) {
- if (rt305x_esw_rr(esw, RT305X_ESW_REG_PCR1) &
- RT305X_ESW_PCR1_WT_DONE)
- break;
-
- if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
- ret = 1;
- break;
- }
- }
-out:
- if (ret)
- printk(KERN_ERR "ramips_eth: MDIO timeout\n");
- return ret;
-}
-
-static unsigned
-rt305x_esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
-{
- unsigned s;
- unsigned val;
-
- s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
- val = rt305x_esw_rr(esw, RT305X_ESW_REG_VLANI(vlan / 2));
- val = (val >> s) & RT305X_ESW_VLANI_VID_M;
-
- return val;
-}
-
-static void
-rt305x_esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
-{
- unsigned s;
-
- s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
- rt305x_esw_rmw(esw,
- RT305X_ESW_REG_VLANI(vlan / 2),
- RT305X_ESW_VLANI_VID_M << s,
- (vid & RT305X_ESW_VLANI_VID_M) << s);
-}
-
-static unsigned
-rt305x_esw_get_pvid(struct rt305x_esw *esw, unsigned port)
-{
- unsigned s, val;
-
- s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
- val = rt305x_esw_rr(esw, RT305X_ESW_REG_PVIDC(port / 2));
- return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
-}
-
-static void
-rt305x_esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
-{
- unsigned s;
-
- s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
- rt305x_esw_rmw(esw,
- RT305X_ESW_REG_PVIDC(port / 2),
- RT305X_ESW_PVIDC_PVID_M << s,
- (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
-}
-
-static unsigned
-rt305x_esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
-{
- unsigned s, val;
-
- s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
- val = rt305x_esw_rr(esw, RT305X_ESW_REG_VMSC(vlan / 4));
- val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
-
- return val;
-}
-
-static void
-rt305x_esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
-{
- unsigned s;
-
- s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
- rt305x_esw_rmw(esw,
- RT305X_ESW_REG_VMSC(vlan / 4),
- RT305X_ESW_VMSC_MSC_M << s,
- (msc & RT305X_ESW_VMSC_MSC_M) << s);
-}
-
-static unsigned
-rt305x_esw_get_port_disable(struct rt305x_esw *esw)
-{
- unsigned reg;
- reg = rt305x_esw_rr(esw, RT305X_ESW_REG_POC0);
- return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
- RT305X_ESW_POC0_DIS_PORT_M;
-}
-
-static void
-rt305x_esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
-{
- unsigned old_mask;
- unsigned enable_mask;
- unsigned changed;
- int i;
-
- old_mask = rt305x_esw_get_port_disable(esw);
- changed = old_mask ^ disable_mask;
- enable_mask = old_mask & disable_mask;
-
- /* enable before writing to MII */
- rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0,
- (RT305X_ESW_POC0_DIS_PORT_M <<
- RT305X_ESW_POC0_DIS_PORT_S),
- enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-
- for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
- if (!(changed & (1 << i)))
- continue;
- if (disable_mask & (1 << i)) {
- /* disable */
- rt305x_mii_write(esw, i, MII_BMCR,
- BMCR_PDOWN);
- } else {
- /* enable */
- rt305x_mii_write(esw, i, MII_BMCR,
- BMCR_FULLDPLX |
- BMCR_ANENABLE |
- BMCR_ANRESTART |
- BMCR_SPEED100);
- }
- }
-
- /* disable after writing to MII */
- rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0,
- (RT305X_ESW_POC0_DIS_PORT_M <<
- RT305X_ESW_POC0_DIS_PORT_S),
- disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-}
-
-static int
-rt305x_esw_apply_config(struct switch_dev *dev);
-
-static void
-rt305x_esw_hw_init(struct rt305x_esw *esw)
-{
- int i;
- u8 port_disable = 0;
- u8 port_map = RT305X_ESW_PMAP_LLLLLL;
-
- /* vodoo from original driver */
- rt305x_esw_wr(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
- rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_SGC2);
- /* Port priority 1 for all ports, vlan enabled. */
- rt305x_esw_wr(esw, 0x00005555 |
- (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
- RT305X_ESW_REG_PFC1);
-
- /* Enable Back Pressure, and Flow Control */
- rt305x_esw_wr(esw,
- ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
- (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
- RT305X_ESW_REG_POC0);
-
- /* Enable Aging, and VLAN TAG removal */
- rt305x_esw_wr(esw,
- ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
- (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
- RT305X_ESW_REG_POC2);
-
- rt305x_esw_wr(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
-
- /*
- * 300s aging timer, max packet len 1536, broadcast storm prevention
- * disabled, disable collision abort, mac xor48 hash, 10 packet back
- * pressure jam, GMII disable was_transmit, back pressure disabled,
- * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
- * ports.
- */
- rt305x_esw_wr(esw, 0x0008a301, RT305X_ESW_REG_SGC);
-
- /* Setup SoC Port control register */
- rt305x_esw_wr(esw,
- (RT305X_ESW_SOCPC_CRC_PADDING |
- (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
- (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
- (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
- RT305X_ESW_REG_SOCPC);
-
- rt305x_esw_wr(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
- rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA);
-
- /* Force Link/Activity on ports */
- rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P0LED);
- rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P1LED);
- rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P2LED);
- rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P3LED);
- rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P4LED);
-
- /* Copy disabled port configuration from bootloader setup */
- port_disable = rt305x_esw_get_port_disable(esw);
- for (i = 0; i < 6; i++)
- esw->ports[i].disable = (port_disable & (1 << i)) != 0;
-
- rt305x_mii_write(esw, 0, 31, 0x8000);
- for (i = 0; i < 5; i++) {
- if (esw->ports[i].disable) {
- rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
- } else {
- rt305x_mii_write(esw, i, MII_BMCR,
- BMCR_FULLDPLX |
- BMCR_ANENABLE |
- BMCR_SPEED100);
- }
- /* TX10 waveform coefficient */
- rt305x_mii_write(esw, i, 26, 0x1601);
- /* TX100/TX10 AD/DA current bias */
- rt305x_mii_write(esw, i, 29, 0x7058);
- /* TX100 slew rate control */
- rt305x_mii_write(esw, i, 30, 0x0018);
- }
-
- /* PHY IOT */
- /* select global register */
- rt305x_mii_write(esw, 0, 31, 0x0);
- /* tune TP_IDL tail and head waveform */
- rt305x_mii_write(esw, 0, 22, 0x052f);
- /* set TX10 signal amplitude threshold to minimum */
- rt305x_mii_write(esw, 0, 17, 0x0fe0);
- /* set squelch amplitude to higher threshold */
- rt305x_mii_write(esw, 0, 18, 0x40ba);
- /* longer TP_IDL tail length */
- rt305x_mii_write(esw, 0, 14, 0x65);
- /* select local register */
- rt305x_mii_write(esw, 0, 31, 0x8000);
-
- switch (esw->pdata->vlan_config) {
- case RT305X_ESW_VLAN_CONFIG_NONE:
- port_map = RT305X_ESW_PMAP_LLLLLL;
- break;
- case RT305X_ESW_VLAN_CONFIG_LLLLW:
- port_map = RT305X_ESW_PMAP_LLLLWL;
- break;
- case RT305X_ESW_VLAN_CONFIG_WLLLL:
- port_map = RT305X_ESW_PMAP_WLLLLL;
- break;
- default:
- BUG();
- }
-
- /*
- * Unused HW feature, but still nice to be consistent here...
- * This is also exported to userspace ('lan' attribute) so it's
- * conveniently usable to decide which ports go into the wan vlan by
- * default.
- */
- rt305x_esw_rmw(esw, RT305X_ESW_REG_SGC2,
- RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
- port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
-
- /* make the switch leds blink */
- for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
- esw->ports[i].led = 0x05;
-
- /* Apply the empty config. */
- rt305x_esw_apply_config(&esw->swdev);
-}
-
-static int
-rt305x_esw_apply_config(struct switch_dev *dev)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- int i;
- u8 disable = 0;
- u8 doubletag = 0;
- u8 en_vlan = 0;
- u8 untag = 0;
-
- for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
- u32 vid, vmsc;
- if (esw->global_vlan_enable) {
- vid = esw->vlans[i].vid;
- vmsc = esw->vlans[i].ports;
- } else {
- vid = RT305X_ESW_VLAN_NONE;
- vmsc = RT305X_ESW_PORTS_NONE;
- }
- rt305x_esw_set_vlan_id(esw, i, vid);
- rt305x_esw_set_vmsc(esw, i, vmsc);
- }
-
- for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
- u32 pvid;
- disable |= esw->ports[i].disable << i;
- if (esw->global_vlan_enable) {
- doubletag |= esw->ports[i].doubletag << i;
- en_vlan |= 1 << i;
- untag |= esw->ports[i].untag << i;
- pvid = esw->ports[i].pvid;
- } else {
- int x = esw->alt_vlan_disable ? 0 : 1;
- doubletag |= x << i;
- en_vlan |= x << i;
- untag |= x << i;
- pvid = 0;
- }
- rt305x_esw_set_pvid(esw, i, pvid);
- if (i < RT305X_ESW_NUM_LEDS)
- rt305x_esw_wr(esw, esw->ports[i].led,
- RT305X_ESW_REG_P0LED + 4*i);
- }
-
- rt305x_esw_set_port_disable(esw, disable);
- rt305x_esw_rmw(esw, RT305X_ESW_REG_SGC2,
- (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
- RT305X_ESW_SGC2_DOUBLE_TAG_S),
- doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
- rt305x_esw_rmw(esw, RT305X_ESW_REG_PFC1,
- RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
- en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
- rt305x_esw_rmw(esw, RT305X_ESW_REG_POC2,
- RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
- untag << RT305X_ESW_POC2_UNTAG_EN_S);
-
- if (!esw->global_vlan_enable) {
- /*
- * Still need to put all ports into vlan 0 or they'll be
- * isolated.
- * NOTE: vlan 0 is special, no vlan tag is prepended
- */
- rt305x_esw_set_vlan_id(esw, 0, 0);
- rt305x_esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
- }
-
- return 0;
-}
-
-static int
-rt305x_esw_reset_switch(struct switch_dev *dev)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- esw->global_vlan_enable = 0;
- memset(esw->ports, 0, sizeof(esw->ports));
- memset(esw->vlans, 0, sizeof(esw->vlans));
- rt305x_esw_hw_init(esw);
-
- return 0;
-}
-
-static int
-rt305x_esw_get_vlan_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-
- val->value.i = esw->global_vlan_enable;
-
- return 0;
-}
-
-static int
-rt305x_esw_set_vlan_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-
- esw->global_vlan_enable = val->value.i != 0;
-
- return 0;
-}
-
-static int
-rt305x_esw_get_alt_vlan_disable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-
- val->value.i = esw->alt_vlan_disable;
-
- return 0;
-}
-
-static int
-rt305x_esw_set_alt_vlan_disable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-
- esw->alt_vlan_disable = val->value.i != 0;
-
- return 0;
-}
-
-static int
-rt305x_esw_get_port_link(struct switch_dev *dev,
- int port,
- struct switch_port_link *link)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- u32 speed, poa;
-
- if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
- return -EINVAL;
-
- poa = rt305x_esw_rr(esw, RT305X_ESW_REG_POA) >> port;
-
- link->link = (poa >> RT305X_ESW_LINK_S) & 1;
- link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
- if (port < RT305X_ESW_NUM_LEDS) {
- speed = (poa >> RT305X_ESW_SPD_S) & 1;
- } else {
- if (port == RT305X_ESW_NUM_PORTS - 1)
- poa >>= 1;
- speed = (poa >> RT305X_ESW_SPD_S) & 3;
- }
- switch (speed) {
- case 0:
- link->speed = SWITCH_PORT_SPEED_10;
- break;
- case 1:
- link->speed = SWITCH_PORT_SPEED_100;
- break;
- case 2:
- case 3: /* forced gige speed can be 2 or 3 */
- link->speed = SWITCH_PORT_SPEED_1000;
- break;
- default:
- link->speed = SWITCH_PORT_SPEED_UNKNOWN;
- break;
- }
-
- return 0;
-}
-
-static int
-rt305x_esw_get_port_bool(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- int idx = val->port_vlan;
- u32 x, reg, shift;
-
- if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
- return -EINVAL;
-
- switch (attr->id) {
- case RT305X_ESW_ATTR_PORT_DISABLE:
- reg = RT305X_ESW_REG_POC0;
- shift = RT305X_ESW_POC0_DIS_PORT_S;
- break;
- case RT305X_ESW_ATTR_PORT_DOUBLETAG:
- reg = RT305X_ESW_REG_SGC2;
- shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
- break;
- case RT305X_ESW_ATTR_PORT_UNTAG:
- reg = RT305X_ESW_REG_POC2;
- shift = RT305X_ESW_POC2_UNTAG_EN_S;
- break;
- case RT305X_ESW_ATTR_PORT_LAN:
- reg = RT305X_ESW_REG_SGC2;
- shift = RT305X_ESW_SGC2_LAN_PMAP_S;
- if (idx >= RT305X_ESW_NUM_LANWAN)
- return -EINVAL;
- break;
- default:
- return -EINVAL;
- }
-
- x = rt305x_esw_rr(esw, reg);
- val->value.i = (x >> (idx + shift)) & 1;
-
- return 0;
-}
-
-static int
-rt305x_esw_set_port_bool(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- int idx = val->port_vlan;
-
- if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
- val->value.i < 0 || val->value.i > 1)
- return -EINVAL;
-
- switch (attr->id) {
- case RT305X_ESW_ATTR_PORT_DISABLE:
- esw->ports[idx].disable = val->value.i;
- break;
- case RT305X_ESW_ATTR_PORT_DOUBLETAG:
- esw->ports[idx].doubletag = val->value.i;
- break;
- case RT305X_ESW_ATTR_PORT_UNTAG:
- esw->ports[idx].untag = val->value.i;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int
-rt305x_esw_get_port_recv_badgood(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- int idx = val->port_vlan;
- int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
- u32 reg;
-
- if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
- return -EINVAL;
-
- reg = rt305x_esw_rr(esw, RT305X_ESW_REG_P0PC + 4*idx);
- val->value.i = (reg >> shift) & 0xffff;
-
- return 0;
-}
-
-static int
-rt305x_esw_get_port_led(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- int idx = val->port_vlan;
-
- if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
- idx >= RT305X_ESW_NUM_LEDS)
- return -EINVAL;
-
- val->value.i = rt305x_esw_rr(esw, RT305X_ESW_REG_P0LED + 4*idx);
-
- return 0;
-}
-
-static int
-rt305x_esw_set_port_led(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- int idx = val->port_vlan;
-
- if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
- return -EINVAL;
-
- esw->ports[idx].led = val->value.i;
-
- return 0;
-}
-
-static int
-rt305x_esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-
- if (port >= RT305X_ESW_NUM_PORTS)
- return -EINVAL;
-
- *val = rt305x_esw_get_pvid(esw, port);
-
- return 0;
-}
-
-static int
-rt305x_esw_set_port_pvid(struct switch_dev *dev, int port, int val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-
- if (port >= RT305X_ESW_NUM_PORTS)
- return -EINVAL;
-
- esw->ports[port].pvid = val;
-
- return 0;
-}
-
-static int
-rt305x_esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- u32 vmsc, poc2;
- int vlan_idx = -1;
- int i;
-
- val->len = 0;
-
- if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
- return -EINVAL;
-
- /* valid vlan? */
- for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
- if (rt305x_esw_get_vlan_id(esw, i) == val->port_vlan &&
- rt305x_esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
- vlan_idx = i;
- break;
- }
- }
-
- if (vlan_idx == -1)
- return -EINVAL;
-
- vmsc = rt305x_esw_get_vmsc(esw, vlan_idx);
- poc2 = rt305x_esw_rr(esw, RT305X_ESW_REG_POC2);
-
- for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
- struct switch_port *p;
- int port_mask = 1 << i;
-
- if (!(vmsc & port_mask))
- continue;
-
- p = &val->value.ports[val->len++];
- p->id = i;
- if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
- p->flags = 0;
- else
- p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
- }
-
- return 0;
-}
-
-static int
-rt305x_esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
- int ports;
- int vlan_idx = -1;
- int i;
-
- if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
- val->len > RT305X_ESW_NUM_PORTS)
- return -EINVAL;
-
- /* one of the already defined vlans? */
- for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
- if (esw->vlans[i].vid == val->port_vlan &&
- esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
- vlan_idx = i;
- break;
- }
- }
-
- /* select a free slot */
- for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
- if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
- vlan_idx = i;
- }
-
- /* bail if all slots are in use */
- if (vlan_idx == -1)
- return -EINVAL;
-
- ports = RT305X_ESW_PORTS_NONE;
- for (i = 0; i < val->len; i++) {
- struct switch_port *p = &val->value.ports[i];
- int port_mask = 1 << p->id;
- bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
-
- if (p->id >= RT305X_ESW_NUM_PORTS)
- return -EINVAL;
-
- ports |= port_mask;
- esw->ports[p->id].untag = untagged;
- }
- esw->vlans[vlan_idx].ports = ports;
- if (ports == RT305X_ESW_PORTS_NONE)
- esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
- else
- esw->vlans[vlan_idx].vid = val->port_vlan;
-
- return 0;
-}
-
-static const struct switch_attr rt305x_esw_global[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_vlan",
- .description = "VLAN mode (1:enabled)",
- .max = 1,
- .id = RT305X_ESW_ATTR_ENABLE_VLAN,
- .get = rt305x_esw_get_vlan_enable,
- .set = rt305x_esw_set_vlan_enable,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "alternate_vlan_disable",
- .description = "Use en_vlan instead of doubletag to disable"
- " VLAN mode",
- .max = 1,
- .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
- .get = rt305x_esw_get_alt_vlan_disable,
- .set = rt305x_esw_set_alt_vlan_disable,
- },
-};
-
-static const struct switch_attr rt305x_esw_port[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "disable",
- .description = "Port state (1:disabled)",
- .max = 1,
- .id = RT305X_ESW_ATTR_PORT_DISABLE,
- .get = rt305x_esw_get_port_bool,
- .set = rt305x_esw_set_port_bool,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "doubletag",
- .description = "Double tagging for incoming vlan packets "
- "(1:enabled)",
- .max = 1,
- .id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
- .get = rt305x_esw_get_port_bool,
- .set = rt305x_esw_set_port_bool,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "untag",
- .description = "Untag (1:strip outgoing vlan tag)",
- .max = 1,
- .id = RT305X_ESW_ATTR_PORT_UNTAG,
- .get = rt305x_esw_get_port_bool,
- .set = rt305x_esw_set_port_bool,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "led",
- .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
- " 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
- " 8:100mact, 10:blink, 12:on)",
- .max = 15,
- .id = RT305X_ESW_ATTR_PORT_LED,
- .get = rt305x_esw_get_port_led,
- .set = rt305x_esw_set_port_led,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "lan",
- .description = "HW port group (0:wan, 1:lan)",
- .max = 1,
- .id = RT305X_ESW_ATTR_PORT_LAN,
- .get = rt305x_esw_get_port_bool,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "recv_bad",
- .description = "Receive bad packet counter",
- .id = RT305X_ESW_ATTR_PORT_RECV_BAD,
- .get = rt305x_esw_get_port_recv_badgood,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "recv_good",
- .description = "Receive good packet counter",
- .id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
- .get = rt305x_esw_get_port_recv_badgood,
- },
-};
-
-static const struct switch_attr rt305x_esw_vlan[] = {
-};
-
-static const struct switch_dev_ops rt305x_esw_ops = {
- .attr_global = {
- .attr = rt305x_esw_global,
- .n_attr = ARRAY_SIZE(rt305x_esw_global),
- },
- .attr_port = {
- .attr = rt305x_esw_port,
- .n_attr = ARRAY_SIZE(rt305x_esw_port),
- },
- .attr_vlan = {
- .attr = rt305x_esw_vlan,
- .n_attr = ARRAY_SIZE(rt305x_esw_vlan),
- },
- .get_vlan_ports = rt305x_esw_get_vlan_ports,
- .set_vlan_ports = rt305x_esw_set_vlan_ports,
- .get_port_pvid = rt305x_esw_get_port_pvid,
- .set_port_pvid = rt305x_esw_set_port_pvid,
- .get_port_link = rt305x_esw_get_port_link,
- .apply_config = rt305x_esw_apply_config,
- .reset_switch = rt305x_esw_reset_switch,
-};
-
-static int
-rt305x_esw_probe(struct platform_device *pdev)
-{
- struct rt305x_esw_platform_data *pdata;
- struct rt305x_esw *esw;
- struct switch_dev *swdev;
- struct resource *res;
- int err;
-
- pdata = pdev->dev.platform_data;
- if (!pdata)
- return -EINVAL;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no memory resource found\n");
- return -ENOMEM;
- }
-
- esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL);
- if (!esw) {
- dev_err(&pdev->dev, "no memory for private data\n");
- return -ENOMEM;
- }
-
- esw->base = ioremap(res->start, resource_size(res));
- if (!esw->base) {
- dev_err(&pdev->dev, "ioremap failed\n");
- err = -ENOMEM;
- goto free_esw;
- }
-
- swdev = &esw->swdev;
- swdev->name = "rt305x-esw";
- swdev->alias = "rt305x";
- swdev->cpu_port = RT305X_ESW_PORT6;
- swdev->ports = RT305X_ESW_NUM_PORTS;
- swdev->vlans = RT305X_ESW_NUM_VIDS;
- swdev->ops = &rt305x_esw_ops;
-
- err = register_switch(swdev, NULL);
- if (err < 0) {
- dev_err(&pdev->dev, "register_switch failed\n");
- goto unmap_base;
- }
-
- platform_set_drvdata(pdev, esw);
-
- esw->pdata = pdata;
- spin_lock_init(&esw->reg_rw_lock);
- rt305x_esw_hw_init(esw);
-
- return 0;
-
-unmap_base:
- iounmap(esw->base);
-free_esw:
- kfree(esw);
- return err;
-}
-
-static int
-rt305x_esw_remove(struct platform_device *pdev)
-{
- struct rt305x_esw *esw;
-
- esw = platform_get_drvdata(pdev);
- if (esw) {
- unregister_switch(&esw->swdev);
- platform_set_drvdata(pdev, NULL);
- iounmap(esw->base);
- kfree(esw);
- }
-
- return 0;
-}
-
-static struct platform_driver rt305x_esw_driver = {
- .probe = rt305x_esw_probe,
- .remove = rt305x_esw_remove,
- .driver = {
- .name = "rt305x-esw",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init
-rt305x_esw_init(void)
-{
- return platform_driver_register(&rt305x_esw_driver);
-}
-
-static void
-rt305x_esw_exit(void)
-{
- platform_driver_unregister(&rt305x_esw_driver);
-}
diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_eth.h b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_eth.h
deleted file mode 100644
index 66187030b9..0000000000
--- a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_eth.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * based on Ralink SDK3.3
- * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef RAMIPS_ETH_H
-#define RAMIPS_ETH_H
-
-#include <linux/mii.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/dma-mapping.h>
-
-#define NUM_RX_DESC 256
-#define NUM_TX_DESC 256
-
-#define RAMIPS_DELAY_EN_INT 0x80
-#define RAMIPS_DELAY_MAX_INT 0x04
-#define RAMIPS_DELAY_MAX_TOUT 0x04
-#define RAMIPS_DELAY_CHAN (((RAMIPS_DELAY_EN_INT | RAMIPS_DELAY_MAX_INT) << 8) | RAMIPS_DELAY_MAX_TOUT)
-#define RAMIPS_DELAY_INIT ((RAMIPS_DELAY_CHAN << 16) | RAMIPS_DELAY_CHAN)
-#define RAMIPS_PSE_FQFC_CFG_INIT 0x80504000
-
-/* interrupt bits */
-#define RAMIPS_CNT_PPE_AF BIT(31)
-#define RAMIPS_CNT_GDM_AF BIT(29)
-#define RAMIPS_PSE_P2_FC BIT(26)
-#define RAMIPS_PSE_BUF_DROP BIT(24)
-#define RAMIPS_GDM_OTHER_DROP BIT(23)
-#define RAMIPS_PSE_P1_FC BIT(22)
-#define RAMIPS_PSE_P0_FC BIT(21)
-#define RAMIPS_PSE_FQ_EMPTY BIT(20)
-#define RAMIPS_GE1_STA_CHG BIT(18)
-#define RAMIPS_TX_COHERENT BIT(17)
-#define RAMIPS_RX_COHERENT BIT(16)
-#define RAMIPS_TX_DONE_INT3 BIT(11)
-#define RAMIPS_TX_DONE_INT2 BIT(10)
-#define RAMIPS_TX_DONE_INT1 BIT(9)
-#define RAMIPS_TX_DONE_INT0 BIT(8)
-#define RAMIPS_RX_DONE_INT0 BIT(2)
-#define RAMIPS_TX_DLY_INT BIT(1)
-#define RAMIPS_RX_DLY_INT BIT(0)
-
-#define RT5350_RX_DLY_INT BIT(30)
-#define RT5350_TX_DLY_INT BIT(28)
-
-/* registers */
-#define RAMIPS_FE_OFFSET 0x0000
-#define RAMIPS_GDMA_OFFSET 0x0020
-#define RAMIPS_PSE_OFFSET 0x0040
-#define RAMIPS_GDMA2_OFFSET 0x0060
-#define RAMIPS_CDMA_OFFSET 0x0080
-#define RAMIPS_PDMA_OFFSET 0x0100
-#define RAMIPS_PPE_OFFSET 0x0200
-#define RAMIPS_CMTABLE_OFFSET 0x0400
-#define RAMIPS_POLICYTABLE_OFFSET 0x1000
-
-#define RT5350_PDMA_OFFSET 0x0800
-#define RT5350_SDM_OFFSET 0x0c00
-
-#define RAMIPS_MDIO_ACCESS (RAMIPS_FE_OFFSET + 0x00)
-#define RAMIPS_MDIO_CFG (RAMIPS_FE_OFFSET + 0x04)
-#define RAMIPS_FE_GLO_CFG (RAMIPS_FE_OFFSET + 0x08)
-#define RAMIPS_FE_RST_GL (RAMIPS_FE_OFFSET + 0x0C)
-#define RAMIPS_FE_INT_STATUS (RAMIPS_FE_OFFSET + 0x10)
-#define RAMIPS_FE_INT_ENABLE (RAMIPS_FE_OFFSET + 0x14)
-#define RAMIPS_MDIO_CFG2 (RAMIPS_FE_OFFSET + 0x18)
-#define RAMIPS_FOC_TS_T (RAMIPS_FE_OFFSET + 0x1C)
-
-#define RAMIPS_GDMA1_FWD_CFG (RAMIPS_GDMA_OFFSET + 0x00)
-#define RAMIPS_GDMA1_SCH_CFG (RAMIPS_GDMA_OFFSET + 0x04)
-#define RAMIPS_GDMA1_SHPR_CFG (RAMIPS_GDMA_OFFSET + 0x08)
-#define RAMIPS_GDMA1_MAC_ADRL (RAMIPS_GDMA_OFFSET + 0x0C)
-#define RAMIPS_GDMA1_MAC_ADRH (RAMIPS_GDMA_OFFSET + 0x10)
-
-#define RAMIPS_GDMA2_FWD_CFG (RAMIPS_GDMA2_OFFSET + 0x00)
-#define RAMIPS_GDMA2_SCH_CFG (RAMIPS_GDMA2_OFFSET + 0x04)
-#define RAMIPS_GDMA2_SHPR_CFG (RAMIPS_GDMA2_OFFSET + 0x08)
-#define RAMIPS_GDMA2_MAC_ADRL (RAMIPS_GDMA2_OFFSET + 0x0C)
-#define RAMIPS_GDMA2_MAC_ADRH (RAMIPS_GDMA2_OFFSET + 0x10)
-
-#define RAMIPS_PSE_FQ_CFG (RAMIPS_PSE_OFFSET + 0x00)
-#define RAMIPS_CDMA_FC_CFG (RAMIPS_PSE_OFFSET + 0x04)
-#define RAMIPS_GDMA1_FC_CFG (RAMIPS_PSE_OFFSET + 0x08)
-#define RAMIPS_GDMA2_FC_CFG (RAMIPS_PSE_OFFSET + 0x0C)
-
-#define RAMIPS_CDMA_CSG_CFG (RAMIPS_CDMA_OFFSET + 0x00)
-#define RAMIPS_CDMA_SCH_CFG (RAMIPS_CDMA_OFFSET + 0x04)
-
-#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00)
-#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04)
-#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08)
-#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C)
-#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10)
-#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14)
-#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18)
-#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C)
-#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20)
-#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24)
-#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28)
-#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C)
-#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30)
-#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34)
-#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38)
-#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C)
-#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100)
-#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104)
-#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108)
-#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C)
-#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110)
-#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114)
-#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118)
-#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C)
-#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204)
-#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208)
-#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c)
-#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220)
-#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228)
-#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280)
-
-
-#define RAMIPS_PDMA_GLO_CFG (RAMIPS_PDMA_OFFSET + 0x00)
-#define RAMIPS_PDMA_RST_CFG (RAMIPS_PDMA_OFFSET + 0x04)
-#define RAMIPS_PDMA_SCH_CFG (RAMIPS_PDMA_OFFSET + 0x08)
-#define RAMIPS_DLY_INT_CFG (RAMIPS_PDMA_OFFSET + 0x0C)
-#define RAMIPS_TX_BASE_PTR0 (RAMIPS_PDMA_OFFSET + 0x10)
-#define RAMIPS_TX_MAX_CNT0 (RAMIPS_PDMA_OFFSET + 0x14)
-#define RAMIPS_TX_CTX_IDX0 (RAMIPS_PDMA_OFFSET + 0x18)
-#define RAMIPS_TX_DTX_IDX0 (RAMIPS_PDMA_OFFSET + 0x1C)
-#define RAMIPS_TX_BASE_PTR1 (RAMIPS_PDMA_OFFSET + 0x20)
-#define RAMIPS_TX_MAX_CNT1 (RAMIPS_PDMA_OFFSET + 0x24)
-#define RAMIPS_TX_CTX_IDX1 (RAMIPS_PDMA_OFFSET + 0x28)
-#define RAMIPS_TX_DTX_IDX1 (RAMIPS_PDMA_OFFSET + 0x2C)
-#define RAMIPS_RX_BASE_PTR0 (RAMIPS_PDMA_OFFSET + 0x30)
-#define RAMIPS_RX_MAX_CNT0 (RAMIPS_PDMA_OFFSET + 0x34)
-#define RAMIPS_RX_CALC_IDX0 (RAMIPS_PDMA_OFFSET + 0x38)
-#define RAMIPS_RX_DRX_IDX0 (RAMIPS_PDMA_OFFSET + 0x3C)
-#define RAMIPS_TX_BASE_PTR2 (RAMIPS_PDMA_OFFSET + 0x40)
-#define RAMIPS_TX_MAX_CNT2 (RAMIPS_PDMA_OFFSET + 0x44)
-#define RAMIPS_TX_CTX_IDX2 (RAMIPS_PDMA_OFFSET + 0x48)
-#define RAMIPS_TX_DTX_IDX2 (RAMIPS_PDMA_OFFSET + 0x4C)
-#define RAMIPS_TX_BASE_PTR3 (RAMIPS_PDMA_OFFSET + 0x50)
-#define RAMIPS_TX_MAX_CNT3 (RAMIPS_PDMA_OFFSET + 0x54)
-#define RAMIPS_TX_CTX_IDX3 (RAMIPS_PDMA_OFFSET + 0x58)
-#define RAMIPS_TX_DTX_IDX3 (RAMIPS_PDMA_OFFSET + 0x5C)
-#define RAMIPS_RX_BASE_PTR1 (RAMIPS_PDMA_OFFSET + 0x60)
-#define RAMIPS_RX_MAX_CNT1 (RAMIPS_PDMA_OFFSET + 0x64)
-#define RAMIPS_RX_CALC_IDX1 (RAMIPS_PDMA_OFFSET + 0x68)
-#define RAMIPS_RX_DRX_IDX1 (RAMIPS_PDMA_OFFSET + 0x6C)
-
-#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00) //Switch DMA configuration
-#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04) //Switch DMA Rx Ring
-#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08) //Switch DMA Tx Ring
-#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C) //Switch MAC address LSB
-#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10) //Switch MAC Address MSB
-#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count
-#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count
-#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count
-#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count
-#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count
-
-#define RT5350_SDM_ICS_EN BIT(16)
-#define RT5350_SDM_TCS_EN BIT(17)
-#define RT5350_SDM_UCS_EN BIT(18)
-
-
-/* MDIO_CFG register bits */
-#define RAMIPS_MDIO_CFG_AUTO_POLL_EN BIT(29)
-#define RAMIPS_MDIO_CFG_GP1_BP_EN BIT(16)
-#define RAMIPS_MDIO_CFG_GP1_FRC_EN BIT(15)
-#define RAMIPS_MDIO_CFG_GP1_SPEED_10 (0 << 13)
-#define RAMIPS_MDIO_CFG_GP1_SPEED_100 (1 << 13)
-#define RAMIPS_MDIO_CFG_GP1_SPEED_1000 (2 << 13)
-#define RAMIPS_MDIO_CFG_GP1_DUPLEX BIT(12)
-#define RAMIPS_MDIO_CFG_GP1_FC_TX BIT(11)
-#define RAMIPS_MDIO_CFG_GP1_FC_RX BIT(10)
-#define RAMIPS_MDIO_CFG_GP1_LNK_DWN BIT(9)
-#define RAMIPS_MDIO_CFG_GP1_AN_FAIL BIT(8)
-#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6)
-#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6)
-#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6)
-#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6)
-#define RAMIPS_MDIO_CFG_TURBO_MII_FREQ BIT(5)
-#define RAMIPS_MDIO_CFG_TURBO_MII_MODE BIT(4)
-#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2)
-#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2)
-#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2)
-#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2)
-#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_0 0
-#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 1
-#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_400 2
-#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_INV 3
-
-/* uni-cast port */
-#define RAMIPS_GDM1_ICS_EN BIT(22)
-#define RAMIPS_GDM1_TCS_EN BIT(21)
-#define RAMIPS_GDM1_UCS_EN BIT(20)
-#define RAMIPS_GDM1_JMB_EN BIT(19)
-#define RAMIPS_GDM1_STRPCRC BIT(16)
-#define RAMIPS_GDM1_UFRC_P_CPU (0 << 12)
-#define RAMIPS_GDM1_UFRC_P_GDMA1 (1 << 12)
-#define RAMIPS_GDM1_UFRC_P_PPE (6 << 12)
-
-/* checksums */
-#define RAMIPS_ICS_GEN_EN BIT(2)
-#define RAMIPS_UCS_GEN_EN BIT(1)
-#define RAMIPS_TCS_GEN_EN BIT(0)
-
-/* dma ring */
-#define RAMIPS_PST_DRX_IDX0 BIT(16)
-#define RAMIPS_PST_DTX_IDX3 BIT(3)
-#define RAMIPS_PST_DTX_IDX2 BIT(2)
-#define RAMIPS_PST_DTX_IDX1 BIT(1)
-#define RAMIPS_PST_DTX_IDX0 BIT(0)
-
-#define RAMIPS_TX_WB_DDONE BIT(6)
-#define RAMIPS_RX_DMA_BUSY BIT(3)
-#define RAMIPS_TX_DMA_BUSY BIT(1)
-#define RAMIPS_RX_DMA_EN BIT(2)
-#define RAMIPS_TX_DMA_EN BIT(0)
-
-#define RAMIPS_PDMA_SIZE_4DWORDS (0 << 4)
-#define RAMIPS_PDMA_SIZE_8DWORDS (1 << 4)
-#define RAMIPS_PDMA_SIZE_16DWORDS (2 << 4)
-
-#define RAMIPS_US_CYC_CNT_MASK 0xff
-#define RAMIPS_US_CYC_CNT_SHIFT 0x8
-#define RAMIPS_US_CYC_CNT_DIVISOR 1000000
-
-#define RX_DMA_PLEN0(_x) (((_x) >> 16) & 0x3fff)
-#define RX_DMA_LSO BIT(30)
-#define RX_DMA_DONE BIT(31)
-
-struct ramips_rx_dma {
- unsigned int rxd1;
- unsigned int rxd2;
- unsigned int rxd3;
- unsigned int rxd4;
-} __packed __aligned(4);
-
-#define TX_DMA_PLEN0_MASK ((0x3fff) << 16)
-#define TX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
-#define TX_DMA_LSO BIT(30)
-#define TX_DMA_DONE BIT(31)
-#define TX_DMA_QN(_x) ((_x) << 16)
-#define TX_DMA_PN(_x) ((_x) << 24)
-#define TX_DMA_QN_MASK TX_DMA_QN(0x7)
-#define TX_DMA_PN_MASK TX_DMA_PN(0x7)
-
-struct ramips_tx_dma {
- unsigned int txd1;
- unsigned int txd2;
- unsigned int txd3;
- unsigned int txd4;
-} __packed __aligned(4);
-
-struct raeth_tx_info {
- struct ramips_tx_dma *tx_desc;
- struct sk_buff *tx_skb;
-};
-
-struct raeth_rx_info {
- struct ramips_rx_dma *rx_desc;
- struct sk_buff *rx_skb;
- dma_addr_t rx_dma;
- unsigned int pad;
-};
-
-struct raeth_int_stats {
- unsigned long rx_delayed;
- unsigned long tx_delayed;
- unsigned long rx_done0;
- unsigned long tx_done0;
- unsigned long tx_done1;
- unsigned long tx_done2;
- unsigned long tx_done3;
- unsigned long rx_coherent;
- unsigned long tx_coherent;
-
- unsigned long pse_fq_empty;
- unsigned long pse_p0_fc;
- unsigned long pse_p1_fc;
- unsigned long pse_p2_fc;
- unsigned long pse_buf_drop;
-
- unsigned long total;
-};
-
-struct raeth_debug {
- struct dentry *debugfs_dir;
-
- struct raeth_int_stats int_stats;
-};
-
-struct raeth_priv
-{
- struct raeth_rx_info *rx_info;
- dma_addr_t rx_desc_dma;
- struct tasklet_struct rx_tasklet;
- struct ramips_rx_dma *rx;
-
- struct raeth_tx_info *tx_info;
- dma_addr_t tx_desc_dma;
- struct tasklet_struct tx_housekeeping_tasklet;
- struct ramips_tx_dma *tx;
-
- unsigned int skb_free_idx;
-
- spinlock_t page_lock;
- struct net_device *netdev;
- struct device *parent;
- struct ramips_eth_platform_data *plat;
-
- int link;
- int speed;
- int duplex;
- int tx_fc;
- int rx_fc;
-
- struct mii_bus *mii_bus;
- int mii_irq[PHY_MAX_ADDR];
- struct phy_device *phy_dev;
- spinlock_t phy_lock;
-
-#ifdef CONFIG_NET_RAMIPS_DEBUG_FS
- struct raeth_debug debug;
-#endif
-};
-
-#ifdef CONFIG_NET_RAMIPS_DEBUG_FS
-int raeth_debugfs_root_init(void);
-void raeth_debugfs_root_exit(void);
-int raeth_debugfs_init(struct raeth_priv *re);
-void raeth_debugfs_exit(struct raeth_priv *re);
-void raeth_debugfs_update_int_stats(struct raeth_priv *re, u32 status);
-#else
-static inline int raeth_debugfs_root_init(void) { return 0; }
-static inline void raeth_debugfs_root_exit(void) {}
-static inline int raeth_debugfs_init(struct raeth_priv *re) { return 0; }
-static inline void raeth_debugfs_exit(struct raeth_priv *re) {}
-static inline void raeth_debugfs_update_int_stats(struct raeth_priv *re,
- u32 status) {}
-#endif /* CONFIG_NET_RAMIPS_DEBUG_FS */
-
-#endif /* RAMIPS_ETH_H */
diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_main.c b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_main.c
deleted file mode 100644
index 267860ff0f..0000000000
--- a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_main.c
+++ /dev/null
@@ -1,1212 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/platform_device.h>
-#include <linux/phy.h>
-
-#include <ramips_eth_platform.h>
-#include "ramips_eth.h"
-
-#define TX_TIMEOUT (20 * HZ / 100)
-#define MAX_RX_LENGTH 1600
-
-#ifdef CONFIG_RALINK_RT305X
-#include <rt305x.h>
-#include "ramips_esw.c"
-#else
-static inline int rt305x_esw_init(void) { return 0; }
-static inline void rt305x_esw_exit(void) { }
-static inline int soc_is_rt5350(void) { return 0; }
-#endif
-
-#define phys_to_bus(a) (a & 0x1FFFFFFF)
-
-#ifdef CONFIG_NET_RAMIPS_DEBUG
-#define RADEBUG(fmt, args...) printk(KERN_DEBUG fmt, ## args)
-#else
-#define RADEBUG(fmt, args...) do {} while (0)
-#endif
-
-#define RX_DLY_INT ((soc_is_rt5350())?(RT5350_RX_DLY_INT):(RAMIPS_RX_DLY_INT))
-#define TX_DLY_INT ((soc_is_rt5350())?(RT5350_TX_DLY_INT):(RAMIPS_TX_DLY_INT))
-
-enum raeth_reg {
- RAETH_REG_PDMA_GLO_CFG = 0,
- RAETH_REG_PDMA_RST_CFG,
- RAETH_REG_DLY_INT_CFG,
- RAETH_REG_TX_BASE_PTR0,
- RAETH_REG_TX_MAX_CNT0,
- RAETH_REG_TX_CTX_IDX0,
- RAETH_REG_RX_BASE_PTR0,
- RAETH_REG_RX_MAX_CNT0,
- RAETH_REG_RX_CALC_IDX0,
- RAETH_REG_FE_INT_ENABLE,
- RAETH_REG_FE_INT_STATUS,
- RAETH_REG_COUNT
-};
-
-static const u32 ramips_reg_table[RAETH_REG_COUNT] = {
- [RAETH_REG_PDMA_GLO_CFG] = RAMIPS_PDMA_GLO_CFG,
- [RAETH_REG_PDMA_RST_CFG] = RAMIPS_PDMA_RST_CFG,
- [RAETH_REG_DLY_INT_CFG] = RAMIPS_DLY_INT_CFG,
- [RAETH_REG_TX_BASE_PTR0] = RAMIPS_TX_BASE_PTR0,
- [RAETH_REG_TX_MAX_CNT0] = RAMIPS_TX_MAX_CNT0,
- [RAETH_REG_TX_CTX_IDX0] = RAMIPS_TX_CTX_IDX0,
- [RAETH_REG_RX_BASE_PTR0] = RAMIPS_RX_BASE_PTR0,
- [RAETH_REG_RX_MAX_CNT0] = RAMIPS_RX_MAX_CNT0,
- [RAETH_REG_RX_CALC_IDX0] = RAMIPS_RX_CALC_IDX0,
- [RAETH_REG_FE_INT_ENABLE] = RAMIPS_FE_INT_ENABLE,
- [RAETH_REG_FE_INT_STATUS] = RAMIPS_FE_INT_STATUS,
-};
-
-static const u32 rt5350_reg_table[RAETH_REG_COUNT] = {
- [RAETH_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
- [RAETH_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
- [RAETH_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
- [RAETH_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
- [RAETH_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
- [RAETH_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
- [RAETH_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
- [RAETH_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
- [RAETH_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
- [RAETH_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
- [RAETH_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-};
-
-static struct net_device * ramips_dev;
-static void __iomem *ramips_fe_base = 0;
-
-static inline u32 get_reg_offset(enum raeth_reg reg)
-{
- const u32 *table;
-
- if (soc_is_rt5350())
- table = rt5350_reg_table;
- else
- table = ramips_reg_table;
-
- return table[reg];
-}
-
-static inline void
-ramips_fe_wr(u32 val, unsigned reg)
-{
- __raw_writel(val, ramips_fe_base + reg);
-}
-
-static inline u32
-ramips_fe_rr(unsigned reg)
-{
- return __raw_readl(ramips_fe_base + reg);
-}
-
-static inline void
-ramips_fe_twr(u32 val, enum raeth_reg reg)
-{
- ramips_fe_wr(val, get_reg_offset(reg));
-}
-
-static inline u32
-ramips_fe_trr(enum raeth_reg reg)
-{
- return ramips_fe_rr(get_reg_offset(reg));
-}
-
-static inline void
-ramips_fe_int_disable(u32 mask)
-{
- ramips_fe_twr(ramips_fe_trr(RAETH_REG_FE_INT_ENABLE) & ~mask,
- RAETH_REG_FE_INT_ENABLE);
- /* flush write */
- ramips_fe_trr(RAETH_REG_FE_INT_ENABLE);
-}
-
-static inline void
-ramips_fe_int_enable(u32 mask)
-{
- ramips_fe_twr(ramips_fe_trr(RAETH_REG_FE_INT_ENABLE) | mask,
- RAETH_REG_FE_INT_ENABLE);
- /* flush write */
- ramips_fe_trr(RAETH_REG_FE_INT_ENABLE);
-}
-
-static inline void
-ramips_hw_set_macaddr(unsigned char *mac)
-{
- if (soc_is_rt5350()) {
- ramips_fe_wr((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
- ramips_fe_wr((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
- RT5350_SDM_MAC_ADRL);
- } else {
- ramips_fe_wr((mac[0] << 8) | mac[1], RAMIPS_GDMA1_MAC_ADRH);
- ramips_fe_wr((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
- RAMIPS_GDMA1_MAC_ADRL);
- }
-}
-
-static struct sk_buff *
-ramips_alloc_skb(struct raeth_priv *re)
-{
- struct sk_buff *skb;
-
- skb = netdev_alloc_skb(re->netdev, MAX_RX_LENGTH + NET_IP_ALIGN);
- if (!skb)
- return NULL;
-
- skb_reserve(skb, NET_IP_ALIGN);
-
- return skb;
-}
-
-static void
-ramips_ring_setup(struct raeth_priv *re)
-{
- int len;
- int i;
-
- memset(re->tx_info, 0, NUM_TX_DESC * sizeof(struct raeth_tx_info));
-
- len = NUM_TX_DESC * sizeof(struct ramips_tx_dma);
- memset(re->tx, 0, len);
-
- for (i = 0; i < NUM_TX_DESC; i++) {
- struct raeth_tx_info *txi;
- struct ramips_tx_dma *txd;
-
- txd = &re->tx[i];
- txd->txd4 = TX_DMA_QN(3) | TX_DMA_PN(1);
- txd->txd2 = TX_DMA_LSO | TX_DMA_DONE;
-
- txi = &re->tx_info[i];
- txi->tx_desc = txd;
- if (txi->tx_skb != NULL) {
- netdev_warn(re->netdev,
- "dirty skb for TX desc %d\n", i);
- txi->tx_skb = NULL;
- }
- }
-
- len = NUM_RX_DESC * sizeof(struct ramips_rx_dma);
- memset(re->rx, 0, len);
-
- for (i = 0; i < NUM_RX_DESC; i++) {
- struct raeth_rx_info *rxi;
- struct ramips_rx_dma *rxd;
- dma_addr_t dma_addr;
-
- rxd = &re->rx[i];
- rxi = &re->rx_info[i];
- BUG_ON(rxi->rx_skb == NULL);
- dma_addr = dma_map_single(&re->netdev->dev, rxi->rx_skb->data,
- MAX_RX_LENGTH, DMA_FROM_DEVICE);
- rxi->rx_dma = dma_addr;
- rxi->rx_desc = rxd;
-
- rxd->rxd1 = (unsigned int) dma_addr;
- rxd->rxd2 = RX_DMA_LSO;
- }
-
- /* flush descriptors */
- wmb();
-}
-
-static void
-ramips_ring_cleanup(struct raeth_priv *re)
-{
- int i;
-
- for (i = 0; i < NUM_RX_DESC; i++) {
- struct raeth_rx_info *rxi;
-
- rxi = &re->rx_info[i];
- if (rxi->rx_skb)
- dma_unmap_single(&re->netdev->dev, rxi->rx_dma,
- MAX_RX_LENGTH, DMA_FROM_DEVICE);
- }
-
- for (i = 0; i < NUM_TX_DESC; i++) {
- struct raeth_tx_info *txi;
-
- txi = &re->tx_info[i];
- if (txi->tx_skb) {
- dev_kfree_skb_any(txi->tx_skb);
- txi->tx_skb = NULL;
- }
- }
-
- netdev_reset_queue(re->netdev);
-}
-
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT3883)
-
-#define RAMIPS_MDIO_RETRY 1000
-
-static unsigned char *ramips_speed_str(struct raeth_priv *re)
-{
- switch (re->speed) {
- case SPEED_1000:
- return "1000";
- case SPEED_100:
- return "100";
- case SPEED_10:
- return "10";
- }
-
- return "?";
-}
-
-static void ramips_link_adjust(struct raeth_priv *re)
-{
- struct ramips_eth_platform_data *pdata;
- u32 mdio_cfg;
-
- pdata = re->parent->platform_data;
- if (!re->link) {
- netif_carrier_off(re->netdev);
- netdev_info(re->netdev, "link down\n");
- return;
- }
-
- mdio_cfg = RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 |
- RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 |
- RAMIPS_MDIO_CFG_GP1_FRC_EN;
-
- if (re->duplex == DUPLEX_FULL)
- mdio_cfg |= RAMIPS_MDIO_CFG_GP1_DUPLEX;
-
- if (re->tx_fc)
- mdio_cfg |= RAMIPS_MDIO_CFG_GP1_FC_TX;
-
- if (re->rx_fc)
- mdio_cfg |= RAMIPS_MDIO_CFG_GP1_FC_RX;
-
- switch (re->speed) {
- case SPEED_10:
- mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_10;
- break;
- case SPEED_100:
- mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_100;
- break;
- case SPEED_1000:
- mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_1000;
- break;
- default:
- BUG();
- }
-
- ramips_fe_wr(mdio_cfg, RAMIPS_MDIO_CFG);
-
- netif_carrier_on(re->netdev);
- netdev_info(re->netdev, "link up (%sMbps/%s duplex)\n",
- ramips_speed_str(re),
- (DUPLEX_FULL == re->duplex) ? "Full" : "Half");
-}
-
-static int
-ramips_mdio_wait_ready(struct raeth_priv *re)
-{
- int retries;
-
- retries = RAMIPS_MDIO_RETRY;
- while (1) {
- u32 t;
-
- t = ramips_fe_rr(RAMIPS_MDIO_ACCESS);
- if ((t & (0x1 << 31)) == 0)
- return 0;
-
- if (retries-- == 0)
- break;
-
- udelay(1);
- }
-
- dev_err(re->parent, "MDIO operation timed out\n");
- return -ETIMEDOUT;
-}
-
-static int
-ramips_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-{
- struct raeth_priv *re = bus->priv;
- int err;
- u32 t;
-
- err = ramips_mdio_wait_ready(re);
- if (err)
- return 0xffff;
-
- t = (phy_addr << 24) | (phy_reg << 16);
- ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
- t |= (1 << 31);
- ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
-
- err = ramips_mdio_wait_ready(re);
- if (err)
- return 0xffff;
-
- RADEBUG("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
- phy_addr, phy_reg, ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff);
-
- return ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff;
-}
-
-static int
-ramips_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
-{
- struct raeth_priv *re = bus->priv;
- int err;
- u32 t;
-
- RADEBUG("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
- phy_addr, phy_reg, ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff);
-
- err = ramips_mdio_wait_ready(re);
- if (err)
- return err;
-
- t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
- ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
- t |= (1 << 31);
- ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
-
- return ramips_mdio_wait_ready(re);
-}
-
-static int
-ramips_mdio_reset(struct mii_bus *bus)
-{
- /* TODO */
- return 0;
-}
-
-static int
-ramips_mdio_init(struct raeth_priv *re)
-{
- int err;
- int i;
-
- re->mii_bus = mdiobus_alloc();
- if (re->mii_bus == NULL)
- return -ENOMEM;
-
- re->mii_bus->name = "ramips_mdio";
- re->mii_bus->read = ramips_mdio_read;
- re->mii_bus->write = ramips_mdio_write;
- re->mii_bus->reset = ramips_mdio_reset;
- re->mii_bus->irq = re->mii_irq;
- re->mii_bus->priv = re;
- re->mii_bus->parent = re->parent;
-
- snprintf(re->mii_bus->id, MII_BUS_ID_SIZE, "%s", "ramips_mdio");
- re->mii_bus->phy_mask = 0;
-
- for (i = 0; i < PHY_MAX_ADDR; i++)
- re->mii_irq[i] = PHY_POLL;
-
- err = mdiobus_register(re->mii_bus);
- if (err)
- goto err_free_bus;
-
- return 0;
-
-err_free_bus:
- kfree(re->mii_bus);
- return err;
-}
-
-static void
-ramips_mdio_cleanup(struct raeth_priv *re)
-{
- mdiobus_unregister(re->mii_bus);
- kfree(re->mii_bus);
-}
-
-static void
-ramips_phy_link_adjust(struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
- struct phy_device *phydev = re->phy_dev;
- unsigned long flags;
- int status_change = 0;
-
- spin_lock_irqsave(&re->phy_lock, flags);
-
- if (phydev->link)
- if (re->duplex != phydev->duplex ||
- re->speed != phydev->speed)
- status_change = 1;
-
- if (phydev->link != re->link)
- status_change = 1;
-
- re->link = phydev->link;
- re->duplex = phydev->duplex;
- re->speed = phydev->speed;
-
- if (status_change)
- ramips_link_adjust(re);
-
- spin_unlock_irqrestore(&re->phy_lock, flags);
-}
-
-static int
-ramips_phy_connect_multi(struct raeth_priv *re)
-{
- struct net_device *netdev = re->netdev;
- struct ramips_eth_platform_data *pdata;
- struct phy_device *phydev = NULL;
- int phy_addr;
- int ret = 0;
-
- pdata = re->parent->platform_data;
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
- if (!(pdata->phy_mask & (1 << phy_addr)))
- continue;
-
- if (re->mii_bus->phy_map[phy_addr] == NULL)
- continue;
-
- RADEBUG("%s: PHY found at %s, uid=%08x\n",
- netdev->name,
- dev_name(&re->mii_bus->phy_map[phy_addr]->dev),
- re->mii_bus->phy_map[phy_addr]->phy_id);
-
- if (phydev == NULL)
- phydev = re->mii_bus->phy_map[phy_addr];
- }
-
- if (!phydev) {
- netdev_err(netdev, "no PHY found with phy_mask=%08x\n",
- pdata->phy_mask);
- return -ENODEV;
- }
-
- re->phy_dev = phy_connect(netdev, dev_name(&phydev->dev),
- ramips_phy_link_adjust, 0,
- pdata->phy_if_mode);
-
- if (IS_ERR(re->phy_dev)) {
- netdev_err(netdev, "could not connect to PHY at %s\n",
- dev_name(&phydev->dev));
- return PTR_ERR(re->phy_dev);
- }
-
- phydev->supported &= PHY_GBIT_FEATURES;
- phydev->advertising = phydev->supported;
-
- RADEBUG("%s: connected to PHY at %s [uid=%08x, driver=%s]\n",
- netdev->name, dev_name(&phydev->dev),
- phydev->phy_id, phydev->drv->name);
-
- re->link = 0;
- re->speed = 0;
- re->duplex = -1;
- re->rx_fc = 0;
- re->tx_fc = 0;
-
- return ret;
-}
-
-static int
-ramips_phy_connect_fixed(struct raeth_priv *re)
-{
- struct ramips_eth_platform_data *pdata;
-
- pdata = re->parent->platform_data;
- switch (pdata->speed) {
- case SPEED_10:
- case SPEED_100:
- case SPEED_1000:
- break;
- default:
- netdev_err(re->netdev, "invalid speed specified\n");
- return -EINVAL;
- }
-
- RADEBUG("%s: using fixed link parameters\n", re->netdev->name);
-
- re->speed = pdata->speed;
- re->duplex = pdata->duplex;
- re->tx_fc = pdata->tx_fc;
- re->rx_fc = pdata->tx_fc;
-
- return 0;
-}
-
-static int
-ramips_phy_connect(struct raeth_priv *re)
-{
- struct ramips_eth_platform_data *pdata;
-
- pdata = re->parent->platform_data;
- if (pdata->phy_mask)
- return ramips_phy_connect_multi(re);
-
- return ramips_phy_connect_fixed(re);
-}
-
-static void
-ramips_phy_disconnect(struct raeth_priv *re)
-{
- if (re->phy_dev)
- phy_disconnect(re->phy_dev);
-}
-
-static void
-ramips_phy_start(struct raeth_priv *re)
-{
- unsigned long flags;
-
- if (re->phy_dev) {
- phy_start(re->phy_dev);
- } else {
- spin_lock_irqsave(&re->phy_lock, flags);
- re->link = 1;
- ramips_link_adjust(re);
- spin_unlock_irqrestore(&re->phy_lock, flags);
- }
-}
-
-static void
-ramips_phy_stop(struct raeth_priv *re)
-{
- unsigned long flags;
-
- if (re->phy_dev)
- phy_stop(re->phy_dev);
-
- spin_lock_irqsave(&re->phy_lock, flags);
- re->link = 0;
- ramips_link_adjust(re);
- spin_unlock_irqrestore(&re->phy_lock, flags);
-}
-#else
-static inline int
-ramips_mdio_init(struct raeth_priv *re)
-{
- return 0;
-}
-
-static inline void
-ramips_mdio_cleanup(struct raeth_priv *re)
-{
-}
-
-static inline int
-ramips_phy_connect(struct raeth_priv *re)
-{
- return 0;
-}
-
-static inline void
-ramips_phy_disconnect(struct raeth_priv *re)
-{
-}
-
-static inline void
-ramips_phy_start(struct raeth_priv *re)
-{
-}
-
-static inline void
-ramips_phy_stop(struct raeth_priv *re)
-{
-}
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT3883 */
-
-static void
-ramips_ring_free(struct raeth_priv *re)
-{
- int len;
- int i;
-
- if (re->rx_info) {
- for (i = 0; i < NUM_RX_DESC; i++) {
- struct raeth_rx_info *rxi;
-
- rxi = &re->rx_info[i];
- if (rxi->rx_skb)
- dev_kfree_skb_any(rxi->rx_skb);
- }
- kfree(re->rx_info);
- }
-
- if (re->rx) {
- len = NUM_RX_DESC * sizeof(struct ramips_rx_dma);
- dma_free_coherent(&re->netdev->dev, len, re->rx,
- re->rx_desc_dma);
- }
-
- if (re->tx) {
- len = NUM_TX_DESC * sizeof(struct ramips_tx_dma);
- dma_free_coherent(&re->netdev->dev, len, re->tx,
- re->tx_desc_dma);
- }
-
- kfree(re->tx_info);
-}
-
-static int
-ramips_ring_alloc(struct raeth_priv *re)
-{
- int len;
- int err = -ENOMEM;
- int i;
-
- re->tx_info = kzalloc(NUM_TX_DESC * sizeof(struct raeth_tx_info),
- GFP_ATOMIC);
- if (!re->tx_info)
- goto err_cleanup;
-
- re->rx_info = kzalloc(NUM_RX_DESC * sizeof(struct raeth_rx_info),
- GFP_ATOMIC);
- if (!re->rx_info)
- goto err_cleanup;
-
- /* allocate tx ring */
- len = NUM_TX_DESC * sizeof(struct ramips_tx_dma);
- re->tx = dma_alloc_coherent(&re->netdev->dev, len,
- &re->tx_desc_dma, GFP_ATOMIC);
- if (!re->tx)
- goto err_cleanup;
-
- /* allocate rx ring */
- len = NUM_RX_DESC * sizeof(struct ramips_rx_dma);
- re->rx = dma_alloc_coherent(&re->netdev->dev, len,
- &re->rx_desc_dma, GFP_ATOMIC);
- if (!re->rx)
- goto err_cleanup;
-
- for (i = 0; i < NUM_RX_DESC; i++) {
- struct sk_buff *skb;
-
- skb = ramips_alloc_skb(re);
- if (!skb)
- goto err_cleanup;
-
- re->rx_info[i].rx_skb = skb;
- }
-
- return 0;
-
-err_cleanup:
- ramips_ring_free(re);
- return err;
-}
-
-static void
-ramips_setup_dma(struct raeth_priv *re)
-{
- ramips_fe_twr(re->tx_desc_dma, RAETH_REG_TX_BASE_PTR0);
- ramips_fe_twr(NUM_TX_DESC, RAETH_REG_TX_MAX_CNT0);
- ramips_fe_twr(0, RAETH_REG_TX_CTX_IDX0);
- ramips_fe_twr(RAMIPS_PST_DTX_IDX0, RAETH_REG_PDMA_RST_CFG);
-
- ramips_fe_twr(re->rx_desc_dma, RAETH_REG_RX_BASE_PTR0);
- ramips_fe_twr(NUM_RX_DESC, RAETH_REG_RX_MAX_CNT0);
- ramips_fe_twr((NUM_RX_DESC - 1), RAETH_REG_RX_CALC_IDX0);
- ramips_fe_twr(RAMIPS_PST_DRX_IDX0, RAETH_REG_PDMA_RST_CFG);
-}
-
-static int
-ramips_eth_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
- struct raeth_tx_info *txi, *txi_next;
- struct ramips_tx_dma *txd, *txd_next;
- unsigned long tx;
- unsigned int tx_next;
- dma_addr_t mapped_addr;
-
- if (re->plat->min_pkt_len) {
- if (skb->len < re->plat->min_pkt_len) {
- if (skb_padto(skb, re->plat->min_pkt_len)) {
- printk(KERN_ERR
- "ramips_eth: skb_padto failed\n");
- kfree_skb(skb);
- return 0;
- }
- skb_put(skb, re->plat->min_pkt_len - skb->len);
- }
- }
-
- dev->trans_start = jiffies;
- mapped_addr = dma_map_single(&re->netdev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
-
- spin_lock(&re->page_lock);
- tx = ramips_fe_trr(RAETH_REG_TX_CTX_IDX0);
- tx_next = (tx + 1) % NUM_TX_DESC;
-
- txi = &re->tx_info[tx];
- txd = txi->tx_desc;
- txi_next = &re->tx_info[tx_next];
- txd_next = txi_next->tx_desc;
-
- if ((txi->tx_skb) || (txi_next->tx_skb) ||
- !(txd->txd2 & TX_DMA_DONE) ||
- !(txd_next->txd2 & TX_DMA_DONE))
- goto out;
-
- txi->tx_skb = skb;
-
- txd->txd1 = (unsigned int) mapped_addr;
- wmb();
- txd->txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len);
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
- ramips_fe_twr(tx_next, RAETH_REG_TX_CTX_IDX0);
- netdev_sent_queue(dev, skb->len);
- spin_unlock(&re->page_lock);
- return NETDEV_TX_OK;
-
- out:
- spin_unlock(&re->page_lock);
- dev->stats.tx_dropped++;
- kfree_skb(skb);
- return NETDEV_TX_OK;
-}
-
-static void
-ramips_eth_rx_hw(unsigned long ptr)
-{
- struct net_device *dev = (struct net_device *) ptr;
- struct raeth_priv *re = netdev_priv(dev);
- int rx;
- int max_rx = 16;
-
- rx = ramips_fe_trr(RAETH_REG_RX_CALC_IDX0);
-
- while (max_rx) {
- struct raeth_rx_info *rxi;
- struct ramips_rx_dma *rxd;
- struct sk_buff *rx_skb, *new_skb;
- int pktlen;
-
- rx = (rx + 1) % NUM_RX_DESC;
-
- rxi = &re->rx_info[rx];
- rxd = rxi->rx_desc;
- if (!(rxd->rxd2 & RX_DMA_DONE))
- break;
-
- rx_skb = rxi->rx_skb;
- pktlen = RX_DMA_PLEN0(rxd->rxd2);
-
- new_skb = ramips_alloc_skb(re);
- /* Reuse the buffer on allocation failures */
- if (new_skb) {
- dma_addr_t dma_addr;
-
- dma_unmap_single(&re->netdev->dev, rxi->rx_dma,
- MAX_RX_LENGTH, DMA_FROM_DEVICE);
-
- skb_put(rx_skb, pktlen);
- rx_skb->dev = dev;
- rx_skb->protocol = eth_type_trans(rx_skb, dev);
- rx_skb->ip_summed = CHECKSUM_NONE;
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pktlen;
- netif_rx(rx_skb);
-
- rxi->rx_skb = new_skb;
-
- dma_addr = dma_map_single(&re->netdev->dev,
- new_skb->data,
- MAX_RX_LENGTH,
- DMA_FROM_DEVICE);
- rxi->rx_dma = dma_addr;
- rxd->rxd1 = (unsigned int) dma_addr;
- wmb();
- } else {
- dev->stats.rx_dropped++;
- }
-
- rxd->rxd2 = RX_DMA_LSO;
- ramips_fe_twr(rx, RAETH_REG_RX_CALC_IDX0);
- max_rx--;
- }
-
- if (max_rx == 0)
- tasklet_schedule(&re->rx_tasklet);
- else
- ramips_fe_int_enable(RX_DLY_INT);
-}
-
-static void
-ramips_eth_tx_housekeeping(unsigned long ptr)
-{
- struct net_device *dev = (struct net_device*)ptr;
- struct raeth_priv *re = netdev_priv(dev);
- unsigned int bytes_compl = 0, pkts_compl = 0;
-
- spin_lock(&re->page_lock);
- while (1) {
- struct raeth_tx_info *txi;
- struct ramips_tx_dma *txd;
-
- txi = &re->tx_info[re->skb_free_idx];
- txd = txi->tx_desc;
-
- if (!(txd->txd2 & TX_DMA_DONE) || !(txi->tx_skb))
- break;
-
- pkts_compl++;
- bytes_compl += txi->tx_skb->len;
-
- dev_kfree_skb_irq(txi->tx_skb);
- txi->tx_skb = NULL;
- re->skb_free_idx++;
- if (re->skb_free_idx >= NUM_TX_DESC)
- re->skb_free_idx = 0;
- }
- netdev_completed_queue(dev, pkts_compl, bytes_compl);
- spin_unlock(&re->page_lock);
-
- ramips_fe_int_enable(TX_DLY_INT);
-}
-
-static void
-ramips_eth_timeout(struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
-
- tasklet_schedule(&re->tx_housekeeping_tasklet);
-}
-
-static irqreturn_t
-ramips_eth_irq(int irq, void *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
- unsigned int status;
-
- status = ramips_fe_trr(RAETH_REG_FE_INT_STATUS);
- status &= ramips_fe_trr(RAETH_REG_FE_INT_ENABLE);
-
- if (!status)
- return IRQ_NONE;
-
- ramips_fe_twr(status, RAETH_REG_FE_INT_STATUS);
-
- if (status & RX_DLY_INT) {
- ramips_fe_int_disable(RX_DLY_INT);
- tasklet_schedule(&re->rx_tasklet);
- }
-
- if (status & TX_DLY_INT) {
- ramips_fe_int_disable(TX_DLY_INT);
- tasklet_schedule(&re->tx_housekeeping_tasklet);
- }
-
- raeth_debugfs_update_int_stats(re, status);
-
- return IRQ_HANDLED;
-}
-
-static int
-ramips_eth_hw_init(struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
- int err;
-
- err = request_irq(dev->irq, ramips_eth_irq, IRQF_DISABLED,
- dev->name, dev);
- if (err)
- return err;
-
- err = ramips_ring_alloc(re);
- if (err)
- goto err_free_irq;
-
- ramips_ring_setup(re);
- ramips_hw_set_macaddr(dev->dev_addr);
-
- ramips_setup_dma(re);
- ramips_fe_wr((ramips_fe_rr(RAMIPS_FE_GLO_CFG) &
- ~(RAMIPS_US_CYC_CNT_MASK << RAMIPS_US_CYC_CNT_SHIFT)) |
- ((re->plat->sys_freq / RAMIPS_US_CYC_CNT_DIVISOR) << RAMIPS_US_CYC_CNT_SHIFT),
- RAMIPS_FE_GLO_CFG);
-
- tasklet_init(&re->tx_housekeeping_tasklet, ramips_eth_tx_housekeeping,
- (unsigned long)dev);
- tasklet_init(&re->rx_tasklet, ramips_eth_rx_hw, (unsigned long)dev);
-
-
- ramips_fe_twr(RAMIPS_DELAY_INIT, RAETH_REG_DLY_INT_CFG);
- ramips_fe_twr(TX_DLY_INT | RX_DLY_INT, RAETH_REG_FE_INT_ENABLE);
- if (soc_is_rt5350()) {
- ramips_fe_wr(ramips_fe_rr(RT5350_SDM_CFG) &
- ~(RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN | 0xffff),
- RT5350_SDM_CFG);
- } else {
- ramips_fe_wr(ramips_fe_rr(RAMIPS_GDMA1_FWD_CFG) &
- ~(RAMIPS_GDM1_ICS_EN | RAMIPS_GDM1_TCS_EN | RAMIPS_GDM1_UCS_EN | 0xffff),
- RAMIPS_GDMA1_FWD_CFG);
- ramips_fe_wr(ramips_fe_rr(RAMIPS_CDMA_CSG_CFG) &
- ~(RAMIPS_ICS_GEN_EN | RAMIPS_TCS_GEN_EN | RAMIPS_UCS_GEN_EN),
- RAMIPS_CDMA_CSG_CFG);
- ramips_fe_wr(RAMIPS_PSE_FQFC_CFG_INIT, RAMIPS_PSE_FQ_CFG);
- }
- ramips_fe_wr(1, RAMIPS_FE_RST_GL);
- ramips_fe_wr(0, RAMIPS_FE_RST_GL);
-
- return 0;
-
-err_free_irq:
- free_irq(dev->irq, dev);
- return err;
-}
-
-static int
-ramips_eth_open(struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
-
- ramips_fe_twr((ramips_fe_trr(RAETH_REG_PDMA_GLO_CFG) & 0xff) |
- (RAMIPS_TX_WB_DDONE | RAMIPS_RX_DMA_EN |
- RAMIPS_TX_DMA_EN | RAMIPS_PDMA_SIZE_4DWORDS),
- RAETH_REG_PDMA_GLO_CFG);
- ramips_phy_start(re);
- netif_start_queue(dev);
- return 0;
-}
-
-static int
-ramips_eth_stop(struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
-
- ramips_fe_twr(ramips_fe_trr(RAETH_REG_PDMA_GLO_CFG) &
- ~(RAMIPS_TX_WB_DDONE | RAMIPS_RX_DMA_EN | RAMIPS_TX_DMA_EN),
- RAETH_REG_PDMA_GLO_CFG);
-
- netif_stop_queue(dev);
- ramips_phy_stop(re);
- RADEBUG("ramips_eth: stopped\n");
- return 0;
-}
-
-static int __init
-ramips_eth_probe(struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
- int err;
-
- BUG_ON(!re->plat->reset_fe);
- re->plat->reset_fe();
- net_srandom(jiffies);
- memcpy(dev->dev_addr, re->plat->mac, ETH_ALEN);
-
- ether_setup(dev);
- dev->mtu = 1500;
- dev->watchdog_timeo = TX_TIMEOUT;
- spin_lock_init(&re->page_lock);
- spin_lock_init(&re->phy_lock);
-
- err = ramips_mdio_init(re);
- if (err)
- return err;
-
- err = ramips_phy_connect(re);
- if (err)
- goto err_mdio_cleanup;
-
- err = raeth_debugfs_init(re);
- if (err)
- goto err_phy_disconnect;
-
- err = ramips_eth_hw_init(dev);
- if (err)
- goto err_debugfs;
-
- return 0;
-
-err_debugfs:
- raeth_debugfs_exit(re);
-err_phy_disconnect:
- ramips_phy_disconnect(re);
-err_mdio_cleanup:
- ramips_mdio_cleanup(re);
- return err;
-}
-
-static void
-ramips_eth_uninit(struct net_device *dev)
-{
- struct raeth_priv *re = netdev_priv(dev);
-
- raeth_debugfs_exit(re);
- ramips_phy_disconnect(re);
- ramips_mdio_cleanup(re);
- ramips_fe_twr(0, RAETH_REG_FE_INT_ENABLE);
- free_irq(dev->irq, dev);
- tasklet_kill(&re->tx_housekeeping_tasklet);
- tasklet_kill(&re->rx_tasklet);
- ramips_ring_cleanup(re);
- ramips_ring_free(re);
-}
-
-static const struct net_device_ops ramips_eth_netdev_ops = {
- .ndo_init = ramips_eth_probe,
- .ndo_uninit = ramips_eth_uninit,
- .ndo_open = ramips_eth_open,
- .ndo_stop = ramips_eth_stop,
- .ndo_start_xmit = ramips_eth_hard_start_xmit,
- .ndo_tx_timeout = ramips_eth_timeout,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int
-ramips_eth_plat_probe(struct platform_device *plat)
-{
- struct raeth_priv *re;
- struct ramips_eth_platform_data *data = plat->dev.platform_data;
- struct resource *res;
- int err;
-
- if (!data) {
- dev_err(&plat->dev, "no platform data specified\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(plat, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&plat->dev, "no memory resource found\n");
- return -ENXIO;
- }
-
- ramips_fe_base = ioremap_nocache(res->start, res->end - res->start + 1);
- if (!ramips_fe_base)
- return -ENOMEM;
-
- ramips_dev = alloc_etherdev(sizeof(struct raeth_priv));
- if (!ramips_dev) {
- dev_err(&plat->dev, "alloc_etherdev failed\n");
- err = -ENOMEM;
- goto err_unmap;
- }
-
- strcpy(ramips_dev->name, "eth%d");
- ramips_dev->irq = platform_get_irq(plat, 0);
- if (ramips_dev->irq < 0) {
- dev_err(&plat->dev, "no IRQ resource found\n");
- err = -ENXIO;
- goto err_free_dev;
- }
- ramips_dev->addr_len = ETH_ALEN;
- ramips_dev->base_addr = (unsigned long)ramips_fe_base;
- ramips_dev->netdev_ops = &ramips_eth_netdev_ops;
-
- re = netdev_priv(ramips_dev);
-
- re->netdev = ramips_dev;
- re->parent = &plat->dev;
- re->speed = data->speed;
- re->duplex = data->duplex;
- re->rx_fc = data->rx_fc;
- re->tx_fc = data->tx_fc;
- re->plat = data;
-
- err = register_netdev(ramips_dev);
- if (err) {
- dev_err(&plat->dev, "error bringing up device\n");
- goto err_free_dev;
- }
-
- RADEBUG("ramips_eth: loaded\n");
- return 0;
-
- err_free_dev:
- kfree(ramips_dev);
- err_unmap:
- iounmap(ramips_fe_base);
- return err;
-}
-
-static int
-ramips_eth_plat_remove(struct platform_device *plat)
-{
- unregister_netdev(ramips_dev);
- free_netdev(ramips_dev);
- RADEBUG("ramips_eth: unloaded\n");
- return 0;
-}
-
-static struct platform_driver ramips_eth_driver = {
- .probe = ramips_eth_plat_probe,
- .remove = ramips_eth_plat_remove,
- .driver = {
- .name = "ramips_eth",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init
-ramips_eth_init(void)
-{
- int ret;
-
- ret = raeth_debugfs_root_init();
- if (ret)
- goto err_out;
-
- ret = rt305x_esw_init();
- if (ret)
- goto err_debugfs_exit;
-
- ret = platform_driver_register(&ramips_eth_driver);
- if (ret) {
- printk(KERN_ERR
- "ramips_eth: Error registering platfom driver!\n");
- goto esw_cleanup;
- }
-
- return 0;
-
-esw_cleanup:
- rt305x_esw_exit();
-err_debugfs_exit:
- raeth_debugfs_root_exit();
-err_out:
- return ret;
-}
-
-static void __exit
-ramips_eth_cleanup(void)
-{
- platform_driver_unregister(&ramips_eth_driver);
- rt305x_esw_exit();
- raeth_debugfs_root_exit();
-}
-
-module_init(ramips_eth_init);
-module_exit(ramips_eth_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-MODULE_DESCRIPTION("ethernet driver for ramips boards");
diff --git a/target/linux/ramips/files-3.7/drivers/spi/spi-ramips.c b/target/linux/ramips/files-3.7/drivers/spi/spi-ramips.c
deleted file mode 100644
index d2ceaf3b8d..0000000000
--- a/target/linux/ramips/files-3.7/drivers/spi/spi-ramips.c
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
- * ramips_spi.c -- Ralink RT288x/RT305x SPI controller driver
- *
- * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spi/spi.h>
-
-#define DRIVER_NAME "ramips-spi"
-#define RALINK_NUM_CHIPSELECTS 1 /* only one slave is supported*/
-#define RALINK_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */
-
-#define RAMIPS_SPI_STAT 0x00
-#define RAMIPS_SPI_CFG 0x10
-#define RAMIPS_SPI_CTL 0x14
-#define RAMIPS_SPI_DATA 0x20
-
-/* SPISTAT register bit field */
-#define SPISTAT_BUSY BIT(0)
-
-/* SPICFG register bit field */
-#define SPICFG_LSBFIRST 0
-#define SPICFG_MSBFIRST BIT(8)
-#define SPICFG_SPICLKPOL BIT(6)
-#define SPICFG_RXCLKEDGE_FALLING BIT(5)
-#define SPICFG_TXCLKEDGE_FALLING BIT(4)
-#define SPICFG_SPICLK_PRESCALE_MASK 0x7
-#define SPICFG_SPICLK_DIV2 0
-#define SPICFG_SPICLK_DIV4 1
-#define SPICFG_SPICLK_DIV8 2
-#define SPICFG_SPICLK_DIV16 3
-#define SPICFG_SPICLK_DIV32 4
-#define SPICFG_SPICLK_DIV64 5
-#define SPICFG_SPICLK_DIV128 6
-#define SPICFG_SPICLK_DISABLE 7
-
-/* SPICTL register bit field */
-#define SPICTL_HIZSDO BIT(3)
-#define SPICTL_STARTWR BIT(2)
-#define SPICTL_STARTRD BIT(1)
-#define SPICTL_SPIENA BIT(0)
-
-#ifdef DEBUG
-#define spi_debug(args...) printk(args)
-#else
-#define spi_debug(args...)
-#endif
-
-struct ramips_spi {
- struct work_struct work;
-
- /* Lock access to transfer list.*/
- spinlock_t lock;
-
- struct list_head msg_queue;
- struct spi_master *master;
- void __iomem *base;
- unsigned int sys_freq;
- unsigned int speed;
-
- struct clk *clk;
-};
-
-static struct workqueue_struct *ramips_spi_wq;
-
-static inline struct ramips_spi *ramips_spidev_to_rs(struct spi_device *spi)
-{
- return spi_master_get_devdata(spi->master);
-}
-
-static inline u32 ramips_spi_read(struct ramips_spi *rs, u32 reg)
-{
- return ioread32(rs->base + reg);
-}
-
-static inline void ramips_spi_write(struct ramips_spi *rs, u32 reg, u32 val)
-{
- iowrite32(val, rs->base + reg);
-}
-
-static inline void ramips_spi_setbits(struct ramips_spi *rs, u32 reg, u32 mask)
-{
- void __iomem *addr = rs->base + reg;
- u32 val;
-
- val = ioread32(addr);
- val |= mask;
- iowrite32(val, addr);
-}
-
-static inline void ramips_spi_clrbits(struct ramips_spi *rs, u32 reg, u32 mask)
-{
- void __iomem *addr = rs->base + reg;
- u32 val;
-
- val = ioread32(addr);
- val &= ~mask;
- iowrite32(val, addr);
-}
-
-static int ramips_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
-{
- struct ramips_spi *rs = ramips_spidev_to_rs(spi);
- u32 rate;
- u32 prescale;
- u32 reg;
-
- spi_debug("%s: speed:%u\n", __func__, speed);
-
- /*
- * the supported rates are: 2,4,8...128
- * round up as we look for equal or less speed
- */
- rate = DIV_ROUND_UP(rs->sys_freq, speed);
- spi_debug("%s: rate-1:%u\n", __func__, rate);
- rate = roundup_pow_of_two(rate);
- spi_debug("%s: rate-2:%u\n", __func__, rate);
-
- /* check if requested speed is too small */
- if (rate > 128)
- return -EINVAL;
-
- if (rate < 2)
- rate = 2;
-
- /* Convert the rate to SPI clock divisor value. */
- prescale = ilog2(rate/2);
- spi_debug("%s: prescale:%u\n", __func__, prescale);
-
- reg = ramips_spi_read(rs, RAMIPS_SPI_CFG);
- reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
- ramips_spi_write(rs, RAMIPS_SPI_CFG, reg);
- rs->speed = speed;
- return 0;
-}
-
-/*
- * called only when no transfer is active on the bus
- */
-static int
-ramips_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
-{
- struct ramips_spi *rs = ramips_spidev_to_rs(spi);
- unsigned int speed = spi->max_speed_hz;
- int rc;
- unsigned int bits_per_word = 8;
-
- if ((t != NULL) && t->speed_hz)
- speed = t->speed_hz;
-
- if ((t != NULL) && t->bits_per_word)
- bits_per_word = t->bits_per_word;
-
- if (rs->speed != speed) {
- spi_debug("%s: speed_hz:%u\n", __func__, speed);
- rc = ramips_spi_baudrate_set(spi, speed);
- if (rc)
- return rc;
- }
-
- if (bits_per_word != 8) {
- spi_debug("%s: bad bits_per_word: %u\n", __func__,
- bits_per_word);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void ramips_spi_set_cs(struct ramips_spi *rs, int enable)
-{
- if (enable)
- ramips_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
- else
- ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-}
-
-static inline int ramips_spi_wait_till_ready(struct ramips_spi *rs)
-{
- int i;
-
- for (i = 0; i < RALINK_SPI_WAIT_RDY_MAX_LOOP; i++) {
- u32 status;
-
- status = ramips_spi_read(rs, RAMIPS_SPI_STAT);
- if ((status & SPISTAT_BUSY) == 0)
- return 0;
-
- udelay(1);
- }
-
- return -ETIMEDOUT;
-}
-
-static unsigned int
-ramips_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
-{
- struct ramips_spi *rs = ramips_spidev_to_rs(spi);
- unsigned count = 0;
- u8 *rx = xfer->rx_buf;
- const u8 *tx = xfer->tx_buf;
- int err;
-
- spi_debug("%s(%d): %s %s\n", __func__, xfer->len,
- (tx != NULL) ? "tx" : " ",
- (rx != NULL) ? "rx" : " ");
-
- if (tx) {
- for (count = 0; count < xfer->len; count++) {
- ramips_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
- ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
- err = ramips_spi_wait_till_ready(rs);
- if (err) {
- dev_err(&spi->dev, "TX failed, err=%d\n", err);
- goto out;
- }
- }
- }
-
- if (rx) {
- for (count = 0; count < xfer->len; count++) {
- ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
- err = ramips_spi_wait_till_ready(rs);
- if (err) {
- dev_err(&spi->dev, "RX failed, err=%d\n", err);
- goto out;
- }
- rx[count] = (u8) ramips_spi_read(rs, RAMIPS_SPI_DATA);
- }
- }
-
-out:
- return count;
-}
-
-static void ramips_spi_work(struct work_struct *work)
-{
- struct ramips_spi *rs =
- container_of(work, struct ramips_spi, work);
-
- spin_lock_irq(&rs->lock);
- while (!list_empty(&rs->msg_queue)) {
- struct spi_message *m;
- struct spi_device *spi;
- struct spi_transfer *t = NULL;
- int par_override = 0;
- int status = 0;
- int cs_active = 0;
-
- m = container_of(rs->msg_queue.next, struct spi_message,
- queue);
-
- list_del_init(&m->queue);
- spin_unlock_irq(&rs->lock);
-
- spi = m->spi;
-
- /* Load defaults */
- status = ramips_spi_setup_transfer(spi, NULL);
-
- if (status < 0)
- goto msg_done;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (par_override || t->speed_hz || t->bits_per_word) {
- par_override = 1;
- status = ramips_spi_setup_transfer(spi, t);
- if (status < 0)
- break;
- if (!t->speed_hz && !t->bits_per_word)
- par_override = 0;
- }
-
- if (!cs_active) {
- ramips_spi_set_cs(rs, 1);
- cs_active = 1;
- }
-
- if (t->len)
- m->actual_length +=
- ramips_spi_write_read(spi, t);
-
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (t->cs_change) {
- ramips_spi_set_cs(rs, 0);
- cs_active = 0;
- }
- }
-
-msg_done:
- if (cs_active)
- ramips_spi_set_cs(rs, 0);
-
- m->status = status;
- m->complete(m->context);
-
- spin_lock_irq(&rs->lock);
- }
-
- spin_unlock_irq(&rs->lock);
-}
-
-static int ramips_spi_setup(struct spi_device *spi)
-{
- struct ramips_spi *rs = ramips_spidev_to_rs(spi);
-
- if ((spi->max_speed_hz == 0) ||
- (spi->max_speed_hz > (rs->sys_freq / 2)))
- spi->max_speed_hz = (rs->sys_freq / 2);
-
- if (spi->max_speed_hz < (rs->sys_freq/128)) {
- dev_err(&spi->dev, "setup: requested speed too low %d Hz\n",
- spi->max_speed_hz);
- return -EINVAL;
- }
-
- if (spi->bits_per_word != 0 && spi->bits_per_word != 8) {
- dev_err(&spi->dev,
- "setup: requested bits per words - os wrong %d bpw\n",
- spi->bits_per_word);
- return -EINVAL;
- }
-
- if (spi->bits_per_word == 0)
- spi->bits_per_word = 8;
-
- /*
- * baudrate & width will be set ramips_spi_setup_transfer
- */
- return 0;
-}
-
-static int ramips_spi_transfer(struct spi_device *spi, struct spi_message *m)
-{
- struct ramips_spi *rs;
- struct spi_transfer *t = NULL;
- unsigned long flags;
-
- m->actual_length = 0;
- m->status = 0;
-
- /* reject invalid messages and transfers */
- if (list_empty(&m->transfers) || !m->complete)
- return -EINVAL;
-
- rs = ramips_spidev_to_rs(spi);
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- unsigned int bits_per_word = spi->bits_per_word;
-
- if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
- dev_err(&spi->dev,
- "message rejected : "
- "invalid transfer data buffers\n");
- goto msg_rejected;
- }
-
- if (t->bits_per_word)
- bits_per_word = t->bits_per_word;
-
- if (bits_per_word != 8) {
- dev_err(&spi->dev,
- "message rejected : "
- "invalid transfer bits_per_word (%d bits)\n",
- bits_per_word);
- goto msg_rejected;
- }
-
- if (t->speed_hz && t->speed_hz < (rs->sys_freq/128)) {
- dev_err(&spi->dev,
- "message rejected : "
- "device min speed (%d Hz) exceeds "
- "required transfer speed (%d Hz)\n",
- (rs->sys_freq/128), t->speed_hz);
- goto msg_rejected;
- }
- }
-
-
- spin_lock_irqsave(&rs->lock, flags);
- list_add_tail(&m->queue, &rs->msg_queue);
- queue_work(ramips_spi_wq, &rs->work);
- spin_unlock_irqrestore(&rs->lock, flags);
-
- return 0;
-msg_rejected:
- /* Message rejected and not queued */
- m->status = -EINVAL;
- if (m->complete)
- m->complete(m->context);
- return -EINVAL;
-}
-
-static void __init ramips_spi_reset(struct ramips_spi *rs)
-{
- ramips_spi_write(rs, RAMIPS_SPI_CFG,
- SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
- SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
- ramips_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
-}
-
-static int __init ramips_spi_probe(struct platform_device *pdev)
-{
- struct spi_master *master;
- struct ramips_spi *rs;
- struct resource *r;
- int status = 0;
-
- master = spi_alloc_master(&pdev->dev, sizeof(*rs));
- if (master == NULL) {
- dev_dbg(&pdev->dev, "master allocation failed\n");
- return -ENOMEM;
- }
-
- if (pdev->id != -1)
- master->bus_num = pdev->id;
-
- /* we support only mode 0, and no options */
- master->mode_bits = 0;
-
- master->setup = ramips_spi_setup;
- master->transfer = ramips_spi_transfer;
- master->num_chipselect = RALINK_NUM_CHIPSELECTS;
-
- dev_set_drvdata(&pdev->dev, master);
-
- rs = spi_master_get_devdata(master);
- rs->master = master;
-
- rs->clk = clk_get(NULL, "sys");
- if (IS_ERR(rs->clk)) {
- status = PTR_ERR(rs->clk);
- dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
- status);
- goto out_put_master;
- }
-
- status = clk_enable(rs->clk);
- if (status)
- goto out_put_clk;
-
- rs->sys_freq = clk_get_rate(rs->clk);
- spi_debug("%s: sys_freq: %ld\n", __func__, rs->sys_freq);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- status = -ENODEV;
- goto out_disable_clk;
- }
-
- if (!request_mem_region(r->start, (r->end - r->start) + 1,
- dev_name(&pdev->dev))) {
- status = -EBUSY;
- goto out_disable_clk;
- }
-
- rs->base = ioremap(r->start, resource_size(r));
- if (rs->base == NULL) {
- dev_err(&pdev->dev, "ioremap failed\n");
- status = -ENOMEM;
- goto out_rel_mem;
- }
-
- INIT_WORK(&rs->work, ramips_spi_work);
-
- spin_lock_init(&rs->lock);
- INIT_LIST_HEAD(&rs->msg_queue);
-
- ramips_spi_reset(rs);
-
- status = spi_register_master(master);
- if (status)
- goto out_unmap_base;
-
- return 0;
-
-out_unmap_base:
- iounmap(rs->base);
-out_rel_mem:
- release_mem_region(r->start, (r->end - r->start) + 1);
-out_disable_clk:
- clk_disable(rs->clk);
-out_put_clk:
- clk_put(rs->clk);
-out_put_master:
- spi_master_put(master);
- return status;
-}
-
-static int ramips_spi_remove(struct platform_device *pdev)
-{
- struct spi_master *master;
- struct ramips_spi *rs;
- struct resource *r;
-
- master = dev_get_drvdata(&pdev->dev);
- rs = spi_master_get_devdata(master);
-
- cancel_work_sync(&rs->work);
-
- iounmap(rs->base);
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, (r->end - r->start) + 1);
-
- clk_disable(rs->clk);
- clk_put(rs->clk);
- spi_unregister_master(master);
-
- return 0;
-}
-
-MODULE_ALIAS("platform:" DRIVER_NAME);
-
-static struct platform_driver ramips_spi_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .remove = ramips_spi_remove,
-};
-
-static int __init ramips_spi_init(void)
-{
- ramips_spi_wq = create_singlethread_workqueue(
- ramips_spi_driver.driver.name);
- if (ramips_spi_wq == NULL)
- return -ENOMEM;
-
- return platform_driver_probe(&ramips_spi_driver, ramips_spi_probe);
-}
-module_init(ramips_spi_init);
-
-static void __exit ramips_spi_exit(void)
-{
- flush_workqueue(ramips_spi_wq);
- platform_driver_unregister(&ramips_spi_driver);
-
- destroy_workqueue(ramips_spi_wq);
-}
-module_exit(ramips_spi_exit);
-
-MODULE_DESCRIPTION("Ralink SPI driver");
-MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Kconfig b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Kconfig
deleted file mode 100644
index 6dd75f14a3..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-config DWC_OTG
- tristate "Ralink RT305X DWC_OTG support"
- depends on SOC_RT305X
- ---help---
- This driver supports Ralink DWC_OTG
-
-choice
- prompt "USB Operation Mode"
- depends on DWC_OTG
- default DWC_OTG_HOST_ONLY
-
-config DWC_OTG_HOST_ONLY
- bool "HOST ONLY MODE"
- depends on DWC_OTG
-
-config DWC_OTG_DEVICE_ONLY
- bool "DEVICE ONLY MODE"
- depends on DWC_OTG
-
-endchoice
-
-config DWC_OTG_DEBUG
- bool "Enable debug mode"
- depends on DWC_OTG
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Makefile b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Makefile
deleted file mode 100644
index 95c5b66fea..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Makefile for DWC_otg Highspeed USB controller driver
-#
-
-ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-
-# Use one of the following flags to compile the software in host-only or
-# device-only mode.
-ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
-EXTRA_CFLAGS += -DDWC_HOST_ONLY
-EXTRA_CFLAGS += -DDWC_EN_ISOC
-endif
-
-ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
-EXTRA_CFLAGS += -DDWC_DEVICE_ONLY
-endif
-
-obj-$(CONFIG_DWC_OTG) := dwc_otg.o
-
-dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o
-dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
-dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
-dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dummy_audio.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dummy_audio.c
deleted file mode 100644
index 225decf765..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dummy_audio.c
+++ /dev/null
@@ -1,1575 +0,0 @@
-/*
- * zero.c -- Gadget Zero, for USB development
- *
- * Copyright (C) 2003-2004 David Brownell
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-/*
- * Gadget Zero only needs two bulk endpoints, and is an example of how you
- * can write a hardware-agnostic gadget driver running inside a USB device.
- *
- * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
- * affect most of the driver.
- *
- * Use it with the Linux host/master side "usbtest" driver to get a basic
- * functional test of your device-side usb stack, or with "usb-skeleton".
- *
- * It supports two similar configurations. One sinks whatever the usb host
- * writes, and in return sources zeroes. The other loops whatever the host
- * writes back, so the host can read it. Module options include:
- *
- * buflen=N default N=4096, buffer size used
- * qlen=N default N=32, how many buffers in the loopback queue
- * loopdefault default false, list loopback config first
- *
- * Many drivers will only have one configuration, letting them be much
- * simpler if they also don't support high speed operation (like this
- * driver does).
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/uts.h>
-#include <linux/version.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/proc_fs.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-# include <linux/usb/ch9.h>
-#else
-# include <linux/usb_ch9.h>
-#endif
-
-#include <linux/usb_gadget.h>
-
-
-/*-------------------------------------------------------------------------*/
-/*-------------------------------------------------------------------------*/
-
-
-static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
-{
- int count = 0;
- u8 c;
- u16 uchar;
-
- /* this insists on correct encodings, though not minimal ones.
- * BUT it currently rejects legit 4-byte UTF-8 code points,
- * which need surrogate pairs. (Unicode 3.1 can use them.)
- */
- while (len != 0 && (c = (u8) *s++) != 0) {
- if (unlikely(c & 0x80)) {
- // 2-byte sequence:
- // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
- if ((c & 0xe0) == 0xc0) {
- uchar = (c & 0x1f) << 6;
-
- c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
- goto fail;
- c &= 0x3f;
- uchar |= c;
-
- // 3-byte sequence (most CJKV characters):
- // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
- } else if ((c & 0xf0) == 0xe0) {
- uchar = (c & 0x0f) << 12;
-
- c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
- goto fail;
- c &= 0x3f;
- uchar |= c << 6;
-
- c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
- goto fail;
- c &= 0x3f;
- uchar |= c;
-
- /* no bogus surrogates */
- if (0xd800 <= uchar && uchar <= 0xdfff)
- goto fail;
-
- // 4-byte sequence (surrogate pairs, currently rare):
- // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
- // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
- // (uuuuu = wwww + 1)
- // FIXME accept the surrogate code points (only)
-
- } else
- goto fail;
- } else
- uchar = c;
- put_unaligned (cpu_to_le16 (uchar), cp++);
- count++;
- len--;
- }
- return count;
-fail:
- return -1;
-}
-
-
-/**
- * usb_gadget_get_string - fill out a string descriptor
- * @table: of c strings encoded using UTF-8
- * @id: string id, from low byte of wValue in get string descriptor
- * @buf: at least 256 bytes
- *
- * Finds the UTF-8 string matching the ID, and converts it into a
- * string descriptor in utf16-le.
- * Returns length of descriptor (always even) or negative errno
- *
- * If your driver needs stings in multiple languages, you'll probably
- * "switch (wIndex) { ... }" in your ep0 string descriptor logic,
- * using this routine after choosing which set of UTF-8 strings to use.
- * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
- * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
- * characters (which are also widely used in C strings).
- */
-int
-usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
-{
- struct usb_string *s;
- int len;
-
- /* descriptor 0 has the language id */
- if (id == 0) {
- buf [0] = 4;
- buf [1] = USB_DT_STRING;
- buf [2] = (u8) table->language;
- buf [3] = (u8) (table->language >> 8);
- return 4;
- }
- for (s = table->strings; s && s->s; s++)
- if (s->id == id)
- break;
-
- /* unrecognized: stall. */
- if (!s || !s->s)
- return -EINVAL;
-
- /* string descriptors have length, tag, then UTF16-LE text */
- len = min ((size_t) 126, strlen (s->s));
- memset (buf + 2, 0, 2 * len); /* zero all the bytes */
- len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
- if (len < 0)
- return -EINVAL;
- buf [0] = (len + 1) * 2;
- buf [1] = USB_DT_STRING;
- return buf [0];
-}
-
-
-/*-------------------------------------------------------------------------*/
-/*-------------------------------------------------------------------------*/
-
-
-/**
- * usb_descriptor_fillbuf - fill buffer with descriptors
- * @buf: Buffer to be filled
- * @buflen: Size of buf
- * @src: Array of descriptor pointers, terminated by null pointer.
- *
- * Copies descriptors into the buffer, returning the length or a
- * negative error code if they can't all be copied. Useful when
- * assembling descriptors for an associated set of interfaces used
- * as part of configuring a composite device; or in other cases where
- * sets of descriptors need to be marshaled.
- */
-int
-usb_descriptor_fillbuf(void *buf, unsigned buflen,
- const struct usb_descriptor_header **src)
-{
- u8 *dest = buf;
-
- if (!src)
- return -EINVAL;
-
- /* fill buffer from src[] until null descriptor ptr */
- for (; 0 != *src; src++) {
- unsigned len = (*src)->bLength;
-
- if (len > buflen)
- return -EINVAL;
- memcpy(dest, *src, len);
- buflen -= len;
- dest += len;
- }
- return dest - (u8 *)buf;
-}
-
-
-/**
- * usb_gadget_config_buf - builts a complete configuration descriptor
- * @config: Header for the descriptor, including characteristics such
- * as power requirements and number of interfaces.
- * @desc: Null-terminated vector of pointers to the descriptors (interface,
- * endpoint, etc) defining all functions in this device configuration.
- * @buf: Buffer for the resulting configuration descriptor.
- * @length: Length of buffer. If this is not big enough to hold the
- * entire configuration descriptor, an error code will be returned.
- *
- * This copies descriptors into the response buffer, building a descriptor
- * for that configuration. It returns the buffer length or a negative
- * status code. The config.wTotalLength field is set to match the length
- * of the result, but other descriptor fields (including power usage and
- * interface count) must be set by the caller.
- *
- * Gadget drivers could use this when constructing a config descriptor
- * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the
- * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
- */
-int usb_gadget_config_buf(
- const struct usb_config_descriptor *config,
- void *buf,
- unsigned length,
- const struct usb_descriptor_header **desc
-)
-{
- struct usb_config_descriptor *cp = buf;
- int len;
-
- /* config descriptor first */
- if (length < USB_DT_CONFIG_SIZE || !desc)
- return -EINVAL;
- *cp = *config;
-
- /* then interface/endpoint/class/vendor/... */
- len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
- length - USB_DT_CONFIG_SIZE, desc);
- if (len < 0)
- return len;
- len += USB_DT_CONFIG_SIZE;
- if (len > 0xffff)
- return -EINVAL;
-
- /* patch up the config descriptor */
- cp->bLength = USB_DT_CONFIG_SIZE;
- cp->bDescriptorType = USB_DT_CONFIG;
- cp->wTotalLength = cpu_to_le16(len);
- cp->bmAttributes |= USB_CONFIG_ATT_ONE;
- return len;
-}
-
-/*-------------------------------------------------------------------------*/
-/*-------------------------------------------------------------------------*/
-
-
-#define RBUF_LEN (1024*1024)
-static int rbuf_start;
-static int rbuf_len;
-static __u8 rbuf[RBUF_LEN];
-
-/*-------------------------------------------------------------------------*/
-
-#define DRIVER_VERSION "St Patrick's Day 2004"
-
-static const char shortname [] = "zero";
-static const char longname [] = "YAMAHA YST-MS35D USB Speaker ";
-
-static const char source_sink [] = "source and sink data";
-static const char loopback [] = "loop input to output";
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * driver assumes self-powered hardware, and
- * has no way for users to trigger remote wakeup.
- *
- * this version autoconfigures as much as possible,
- * which is reasonable for most "bulk-only" drivers.
- */
-static const char *EP_IN_NAME; /* source */
-static const char *EP_OUT_NAME; /* sink */
-
-/*-------------------------------------------------------------------------*/
-
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ 512
-
-struct zero_dev {
- spinlock_t lock;
- struct usb_gadget *gadget;
- struct usb_request *req; /* for control responses */
-
- /* when configured, we have one of two configs:
- * - source data (in to host) and sink it (out from host)
- * - or loop it back (out from host back in to host)
- */
- u8 config;
- struct usb_ep *in_ep, *out_ep;
-
- /* autoresume timer */
- struct timer_list resume;
-};
-
-#define xprintk(d,level,fmt,args...) \
- dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG DBG
-#else
-#define VDBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
-
-/*-------------------------------------------------------------------------*/
-
-static unsigned buflen = 4096;
-static unsigned qlen = 32;
-static unsigned pattern = 0;
-
-module_param (buflen, uint, S_IRUGO|S_IWUSR);
-module_param (qlen, uint, S_IRUGO|S_IWUSR);
-module_param (pattern, uint, S_IRUGO|S_IWUSR);
-
-/*
- * if it's nonzero, autoresume says how many seconds to wait
- * before trying to wake up the host after suspend.
- */
-static unsigned autoresume = 0;
-module_param (autoresume, uint, 0);
-
-/*
- * Normally the "loopback" configuration is second (index 1) so
- * it's not the default. Here's where to change that order, to
- * work better with hosts where config changes are problematic.
- * Or controllers (like superh) that only support one config.
- */
-static int loopdefault = 0;
-
-module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
-
-/*-------------------------------------------------------------------------*/
-
-/* Thanks to NetChip Technologies for donating this product ID.
- *
- * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
- * Instead: allocate your own, using normal USB-IF procedures.
- */
-#ifndef CONFIG_USB_ZERO_HNPTEST
-#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */
-#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */
-#else
-#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */
-#define DRIVER_PRODUCT_NUM 0xbadd
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * DESCRIPTORS ... most are static, but strings and (full)
- * configuration descriptors are built on demand.
- */
-
-/*
-#define STRING_MANUFACTURER 25
-#define STRING_PRODUCT 42
-#define STRING_SERIAL 101
-*/
-#define STRING_MANUFACTURER 1
-#define STRING_PRODUCT 2
-#define STRING_SERIAL 3
-
-#define STRING_SOURCE_SINK 250
-#define STRING_LOOPBACK 251
-
-/*
- * This device advertises two configurations; these numbers work
- * on a pxa250 as well as more flexible hardware.
- */
-#define CONFIG_SOURCE_SINK 3
-#define CONFIG_LOOPBACK 2
-
-/*
-static struct usb_device_descriptor
-device_desc = {
- .bLength = sizeof device_desc,
- .bDescriptorType = USB_DT_DEVICE,
-
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
- .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-
- .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
- .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
- .iSerialNumber = STRING_SERIAL,
- .bNumConfigurations = 2,
-};
-*/
-static struct usb_device_descriptor
-device_desc = {
- .bLength = sizeof device_desc,
- .bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = __constant_cpu_to_le16 (0x0100),
- .bDeviceClass = USB_CLASS_PER_INTERFACE,
- .bDeviceSubClass = 0,
- .bDeviceProtocol = 0,
- .bMaxPacketSize0 = 64,
- .bcdDevice = __constant_cpu_to_le16 (0x0100),
- .idVendor = __constant_cpu_to_le16 (0x0499),
- .idProduct = __constant_cpu_to_le16 (0x3002),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
- .iSerialNumber = STRING_SERIAL,
- .bNumConfigurations = 1,
-};
-
-static struct usb_config_descriptor
-z_config = {
- .bLength = sizeof z_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 2,
- .bConfigurationValue = 1,
- .iConfiguration = 0,
- .bmAttributes = 0x40,
- .bMaxPower = 0, /* self-powered */
-};
-
-
-static struct usb_otg_descriptor
-otg_descriptor = {
- .bLength = sizeof otg_descriptor,
- .bDescriptorType = USB_DT_OTG,
-
- .bmAttributes = USB_OTG_SRP,
-};
-
-/* one interface in each configuration */
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- *
- * that means alternate endpoint descriptors (bigger packets)
- * and a "device qualifier" ... plus more construction options
- * for the config descriptor.
- */
-
-static struct usb_qualifier_descriptor
-dev_qualifier = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
- .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-
- .bNumConfigurations = 2,
-};
-
-
-struct usb_cs_as_general_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bDescriptorSubType;
- __u8 bTerminalLink;
- __u8 bDelay;
- __u16 wFormatTag;
-} __attribute__ ((packed));
-
-struct usb_cs_as_format_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bDescriptorSubType;
- __u8 bFormatType;
- __u8 bNrChannels;
- __u8 bSubframeSize;
- __u8 bBitResolution;
- __u8 bSamfreqType;
- __u8 tLowerSamFreq[3];
- __u8 tUpperSamFreq[3];
-} __attribute__ ((packed));
-
-static const struct usb_interface_descriptor
-z_audio_control_if_desc = {
- .bLength = sizeof z_audio_control_if_desc,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 0,
- .bAlternateSetting = 0,
- .bNumEndpoints = 0,
- .bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = 0x1,
- .bInterfaceProtocol = 0,
- .iInterface = 0,
-};
-
-static const struct usb_interface_descriptor
-z_audio_if_desc = {
- .bLength = sizeof z_audio_if_desc,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 1,
- .bAlternateSetting = 0,
- .bNumEndpoints = 0,
- .bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = 0x2,
- .bInterfaceProtocol = 0,
- .iInterface = 0,
-};
-
-static const struct usb_interface_descriptor
-z_audio_if_desc2 = {
- .bLength = sizeof z_audio_if_desc,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 1,
- .bAlternateSetting = 1,
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = 0x2,
- .bInterfaceProtocol = 0,
- .iInterface = 0,
-};
-
-static const struct usb_cs_as_general_descriptor
-z_audio_cs_as_if_desc = {
- .bLength = 7,
- .bDescriptorType = 0x24,
-
- .bDescriptorSubType = 0x01,
- .bTerminalLink = 0x01,
- .bDelay = 0x0,
- .wFormatTag = __constant_cpu_to_le16 (0x0001)
-};
-
-
-static const struct usb_cs_as_format_descriptor
-z_audio_cs_as_format_desc = {
- .bLength = 0xe,
- .bDescriptorType = 0x24,
-
- .bDescriptorSubType = 2,
- .bFormatType = 1,
- .bNrChannels = 1,
- .bSubframeSize = 1,
- .bBitResolution = 8,
- .bSamfreqType = 0,
- .tLowerSamFreq = {0x7e, 0x13, 0x00},
- .tUpperSamFreq = {0xe2, 0xd6, 0x00},
-};
-
-static const struct usb_endpoint_descriptor
-z_iso_ep = {
- .bLength = 0x09,
- .bDescriptorType = 0x05,
- .bEndpointAddress = 0x04,
- .bmAttributes = 0x09,
- .wMaxPacketSize = 0x0038,
- .bInterval = 0x01,
- .bRefresh = 0x00,
- .bSynchAddress = 0x00,
-};
-
-static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-
-// 9 bytes
-static char z_ac_interface_header_desc[] =
-{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
-
-// 12 bytes
-static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
- 0x03, 0x00, 0x00, 0x00};
-// 13 bytes
-static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
- 0x02, 0x00, 0x02, 0x00, 0x00};
-// 9 bytes
-static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
- 0x00};
-
-static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
- 0x00};
-
-static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-
-static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
- 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-
-static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
- 0x00};
-
-static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-
-static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
- 0x00};
-
-static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-
-static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
- 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-
-static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
- 0x00};
-
-static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-
-static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
- 0x00};
-
-static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-
-static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
- 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-
-static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
- 0x00};
-
-static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-
-static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
- 0x00};
-
-static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-
-static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
- 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-
-static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
- 0x00};
-
-static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-
-static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
- 0x00};
-
-static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-
-static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
- 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-
-static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
- 0x00};
-
-static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-
-
-
-static const struct usb_descriptor_header *z_function [] = {
- (struct usb_descriptor_header *) &z_audio_control_if_desc,
- (struct usb_descriptor_header *) &z_ac_interface_header_desc,
- (struct usb_descriptor_header *) &z_0,
- (struct usb_descriptor_header *) &z_1,
- (struct usb_descriptor_header *) &z_2,
- (struct usb_descriptor_header *) &z_audio_if_desc,
- (struct usb_descriptor_header *) &z_audio_if_desc2,
- (struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
- (struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
- (struct usb_descriptor_header *) &z_iso_ep,
- (struct usb_descriptor_header *) &z_iso_ep2,
- (struct usb_descriptor_header *) &za_0,
- (struct usb_descriptor_header *) &za_1,
- (struct usb_descriptor_header *) &za_2,
- (struct usb_descriptor_header *) &za_3,
- (struct usb_descriptor_header *) &za_4,
- (struct usb_descriptor_header *) &za_5,
- (struct usb_descriptor_header *) &za_6,
- (struct usb_descriptor_header *) &za_7,
- (struct usb_descriptor_header *) &za_8,
- (struct usb_descriptor_header *) &za_9,
- (struct usb_descriptor_header *) &za_10,
- (struct usb_descriptor_header *) &za_11,
- (struct usb_descriptor_header *) &za_12,
- (struct usb_descriptor_header *) &za_13,
- (struct usb_descriptor_header *) &za_14,
- (struct usb_descriptor_header *) &za_15,
- (struct usb_descriptor_header *) &za_16,
- (struct usb_descriptor_header *) &za_17,
- (struct usb_descriptor_header *) &za_18,
- (struct usb_descriptor_header *) &za_19,
- (struct usb_descriptor_header *) &za_20,
- (struct usb_descriptor_header *) &za_21,
- (struct usb_descriptor_header *) &za_22,
- (struct usb_descriptor_header *) &za_23,
- (struct usb_descriptor_header *) &za_24,
- NULL,
-};
-
-/* maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-
-#else
-
-/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g,hs,fs) fs
-
-#endif /* !CONFIG_USB_GADGET_DUALSPEED */
-
-static char manufacturer [40];
-//static char serial [40];
-static char serial [] = "Ser 00 em";
-
-/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
- { STRING_MANUFACTURER, manufacturer, },
- { STRING_PRODUCT, longname, },
- { STRING_SERIAL, serial, },
- { STRING_LOOPBACK, loopback, },
- { STRING_SOURCE_SINK, source_sink, },
- { } /* end of list */
-};
-
-static struct usb_gadget_strings stringtab = {
- .language = 0x0409, /* en-us */
- .strings = strings,
-};
-
-/*
- * config descriptors are also handcrafted. these must agree with code
- * that sets configurations, and with code managing interfaces and their
- * altsettings. other complexity may come from:
- *
- * - high speed support, including "other speed config" rules
- * - multiple configurations
- * - interfaces with alternate settings
- * - embedded class or vendor-specific descriptors
- *
- * this handles high speed, and has a second config that could as easily
- * have been an alternate interface setting (on most hardware).
- *
- * NOTE: to demonstrate (and test) more USB capabilities, this driver
- * should include an altsetting to test interrupt transfers, including
- * high bandwidth modes at high speed. (Maybe work like Intel's test
- * device?)
- */
-static int
-config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
-{
- int len;
- const struct usb_descriptor_header **function;
-
- function = z_function;
- len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
- if (len < 0)
- return len;
- ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
- return len;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct usb_request *
-alloc_ep_req (struct usb_ep *ep, unsigned length)
-{
- struct usb_request *req;
-
- req = usb_ep_alloc_request (ep, GFP_ATOMIC);
- if (req) {
- req->length = length;
- req->buf = usb_ep_alloc_buffer (ep, length,
- &req->dma, GFP_ATOMIC);
- if (!req->buf) {
- usb_ep_free_request (ep, req);
- req = NULL;
- }
- }
- return req;
-}
-
-static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
-{
- if (req->buf)
- usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
- usb_ep_free_request (ep, req);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* optionally require specific source/sink data patterns */
-
-static int
-check_read_data (
- struct zero_dev *dev,
- struct usb_ep *ep,
- struct usb_request *req
-)
-{
- unsigned i;
- u8 *buf = req->buf;
-
- for (i = 0; i < req->actual; i++, buf++) {
- switch (pattern) {
- /* all-zeroes has no synchronization issues */
- case 0:
- if (*buf == 0)
- continue;
- break;
- /* mod63 stays in sync with short-terminated transfers,
- * or otherwise when host and gadget agree on how large
- * each usb transfer request should be. resync is done
- * with set_interface or set_config.
- */
- case 1:
- if (*buf == (u8)(i % 63))
- continue;
- break;
- }
- ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
- usb_ep_set_halt (ep);
- return -EINVAL;
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void zero_reset_config (struct zero_dev *dev)
-{
- if (dev->config == 0)
- return;
-
- DBG (dev, "reset config\n");
-
- /* just disable endpoints, forcing completion of pending i/o.
- * all our completion handlers free their requests in this case.
- */
- if (dev->in_ep) {
- usb_ep_disable (dev->in_ep);
- dev->in_ep = NULL;
- }
- if (dev->out_ep) {
- usb_ep_disable (dev->out_ep);
- dev->out_ep = NULL;
- }
- dev->config = 0;
- del_timer (&dev->resume);
-}
-
-#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
-
-static void
-zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct zero_dev *dev = ep->driver_data;
- int status = req->status;
- int i, j;
-
- switch (status) {
-
- case 0: /* normal completion? */
- //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
- for (i=0, j=rbuf_start; i<req->actual; i++) {
- //printk ("%02x ", ((__u8*)req->buf)[i]);
- rbuf[j] = ((__u8*)req->buf)[i];
- j++;
- if (j >= RBUF_LEN) j=0;
- }
- rbuf_start = j;
- //printk ("\n\n");
-
- if (rbuf_len < RBUF_LEN) {
- rbuf_len += req->actual;
- if (rbuf_len > RBUF_LEN) {
- rbuf_len = RBUF_LEN;
- }
- }
-
- break;
-
- /* this endpoint is normally active while we're configured */
- case -ECONNABORTED: /* hardware forced ep reset */
- case -ECONNRESET: /* request dequeued */
- case -ESHUTDOWN: /* disconnect from host */
- VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
- req->actual, req->length);
- if (ep == dev->out_ep)
- check_read_data (dev, ep, req);
- free_ep_req (ep, req);
- return;
-
- case -EOVERFLOW: /* buffer overrun on read means that
- * we didn't provide a big enough
- * buffer.
- */
- default:
-#if 1
- DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
- status, req->actual, req->length);
-#endif
- case -EREMOTEIO: /* short read */
- break;
- }
-
- status = usb_ep_queue (ep, req, GFP_ATOMIC);
- if (status) {
- ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
- ep->name, req->length, status);
- usb_ep_set_halt (ep);
- /* FIXME recover later ... somehow */
- }
-}
-
-static struct usb_request *
-zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
-{
- struct usb_request *req;
- int status;
-
- req = alloc_ep_req (ep, 512);
- if (!req)
- return NULL;
-
- req->complete = zero_isoc_complete;
-
- status = usb_ep_queue (ep, req, gfp_flags);
- if (status) {
- struct zero_dev *dev = ep->driver_data;
-
- ERROR (dev, "start %s --> %d\n", ep->name, status);
- free_ep_req (ep, req);
- req = NULL;
- }
-
- return req;
-}
-
-/* change our operational config. this code must agree with the code
- * that returns config descriptors, and altsetting code.
- *
- * it's also responsible for power management interactions. some
- * configurations might not work with our current power sources.
- *
- * note that some device controller hardware will constrain what this
- * code can do, perhaps by disallowing more than one configuration or
- * by limiting configuration choices (like the pxa2xx).
- */
-static int
-zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
-{
- int result = 0;
- struct usb_gadget *gadget = dev->gadget;
- const struct usb_endpoint_descriptor *d;
- struct usb_ep *ep;
-
- if (number == dev->config)
- return 0;
-
- zero_reset_config (dev);
-
- gadget_for_each_ep (ep, gadget) {
-
- if (strcmp (ep->name, "ep4") == 0) {
-
- d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
- result = usb_ep_enable (ep, d);
-
- if (result == 0) {
- ep->driver_data = dev;
- dev->in_ep = ep;
-
- if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
-
- dev->in_ep = ep;
- continue;
- }
-
- usb_ep_disable (ep);
- result = -EIO;
- }
- }
-
- }
-
- dev->config = number;
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length)
- DBG ((struct zero_dev *) ep->driver_data,
- "setup complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
-}
-
-/*
- * The setup() callback implements all the ep0 functionality that's
- * not handled lower down, in hardware or the hardware driver (like
- * device and endpoint feature flags, and their status). It's all
- * housekeeping for the gadget function we're implementing. Most of
- * the work is in config-specific setup.
- */
-static int
-zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
-{
- struct zero_dev *dev = get_gadget_data (gadget);
- struct usb_request *req = dev->req;
- int value = -EOPNOTSUPP;
-
- /* usually this stores reply data in the pre-allocated ep0 buffer,
- * but config change events will reconfigure hardware.
- */
- req->zero = 0;
- switch (ctrl->bRequest) {
-
- case USB_REQ_GET_DESCRIPTOR:
-
- switch (ctrl->wValue >> 8) {
-
- case USB_DT_DEVICE:
- value = min (ctrl->wLength, (u16) sizeof device_desc);
- memcpy (req->buf, &device_desc, value);
- break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- case USB_DT_DEVICE_QUALIFIER:
- if (!gadget->is_dualspeed)
- break;
- value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
- memcpy (req->buf, &dev_qualifier, value);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget->is_dualspeed)
- break;
- // FALLTHROUGH
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
- case USB_DT_CONFIG:
- value = config_buf (gadget, req->buf,
- ctrl->wValue >> 8,
- ctrl->wValue & 0xff);
- if (value >= 0)
- value = min (ctrl->wLength, (u16) value);
- break;
-
- case USB_DT_STRING:
- /* wIndex == language code.
- * this driver only handles one language, you can
- * add string tables for other languages, using
- * any UTF-8 characters
- */
- value = usb_gadget_get_string (&stringtab,
- ctrl->wValue & 0xff, req->buf);
- if (value >= 0) {
- value = min (ctrl->wLength, (u16) value);
- }
- break;
- }
- break;
-
- /* currently two configs, two speeds */
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != 0)
- goto unknown;
-
- spin_lock (&dev->lock);
- value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
- spin_unlock (&dev->lock);
- break;
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != USB_DIR_IN)
- goto unknown;
- *(u8 *)req->buf = dev->config;
- value = min (ctrl->wLength, (u16) 1);
- break;
-
- /* until we add altsetting support, or other interfaces,
- * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
- * and already killed pending endpoint I/O.
- */
- case USB_REQ_SET_INTERFACE:
-
- if (ctrl->bRequestType != USB_RECIP_INTERFACE)
- goto unknown;
- spin_lock (&dev->lock);
- if (dev->config) {
- u8 config = dev->config;
-
- /* resets interface configuration, forgets about
- * previous transaction state (queued bufs, etc)
- * and re-inits endpoint state (toggle etc)
- * no response queued, just zero status == success.
- * if we had more than one interface we couldn't
- * use this "reset the config" shortcut.
- */
- zero_reset_config (dev);
- zero_set_config (dev, config, GFP_ATOMIC);
- value = 0;
- }
- spin_unlock (&dev->lock);
- break;
- case USB_REQ_GET_INTERFACE:
- if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
- value = ctrl->wLength;
- break;
- }
- else {
- if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
- goto unknown;
- if (!dev->config)
- break;
- if (ctrl->wIndex != 0) {
- value = -EDOM;
- break;
- }
- *(u8 *)req->buf = 0;
- value = min (ctrl->wLength, (u16) 1);
- }
- break;
-
- /*
- * These are the same vendor-specific requests supported by
- * Intel's USB 2.0 compliance test devices. We exceed that
- * device spec by allowing multiple-packet requests.
- */
- case 0x5b: /* control WRITE test -- fill the buffer */
- if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
- goto unknown;
- if (ctrl->wValue || ctrl->wIndex)
- break;
- /* just read that many bytes into the buffer */
- if (ctrl->wLength > USB_BUFSIZ)
- break;
- value = ctrl->wLength;
- break;
- case 0x5c: /* control READ test -- return the buffer */
- if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
- goto unknown;
- if (ctrl->wValue || ctrl->wIndex)
- break;
- /* expect those bytes are still in the buffer; send back */
- if (ctrl->wLength > USB_BUFSIZ
- || ctrl->wLength != req->length)
- break;
- value = ctrl->wLength;
- break;
-
- case 0x01: // SET_CUR
- case 0x02:
- case 0x03:
- case 0x04:
- case 0x05:
- value = ctrl->wLength;
- break;
- case 0x81:
- switch (ctrl->wValue) {
- case 0x0201:
- case 0x0202:
- ((u8*)req->buf)[0] = 0x00;
- ((u8*)req->buf)[1] = 0xe3;
- break;
- case 0x0300:
- case 0x0500:
- ((u8*)req->buf)[0] = 0x00;
- break;
- }
- //((u8*)req->buf)[0] = 0x81;
- //((u8*)req->buf)[1] = 0x81;
- value = ctrl->wLength;
- break;
- case 0x82:
- switch (ctrl->wValue) {
- case 0x0201:
- case 0x0202:
- ((u8*)req->buf)[0] = 0x00;
- ((u8*)req->buf)[1] = 0xc3;
- break;
- case 0x0300:
- case 0x0500:
- ((u8*)req->buf)[0] = 0x00;
- break;
- }
- //((u8*)req->buf)[0] = 0x82;
- //((u8*)req->buf)[1] = 0x82;
- value = ctrl->wLength;
- break;
- case 0x83:
- switch (ctrl->wValue) {
- case 0x0201:
- case 0x0202:
- ((u8*)req->buf)[0] = 0x00;
- ((u8*)req->buf)[1] = 0x00;
- break;
- case 0x0300:
- ((u8*)req->buf)[0] = 0x60;
- break;
- case 0x0500:
- ((u8*)req->buf)[0] = 0x18;
- break;
- }
- //((u8*)req->buf)[0] = 0x83;
- //((u8*)req->buf)[1] = 0x83;
- value = ctrl->wLength;
- break;
- case 0x84:
- switch (ctrl->wValue) {
- case 0x0201:
- case 0x0202:
- ((u8*)req->buf)[0] = 0x00;
- ((u8*)req->buf)[1] = 0x01;
- break;
- case 0x0300:
- case 0x0500:
- ((u8*)req->buf)[0] = 0x08;
- break;
- }
- //((u8*)req->buf)[0] = 0x84;
- //((u8*)req->buf)[1] = 0x84;
- value = ctrl->wLength;
- break;
- case 0x85:
- ((u8*)req->buf)[0] = 0x85;
- ((u8*)req->buf)[1] = 0x85;
- value = ctrl->wLength;
- break;
-
-
- default:
-unknown:
- printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- ctrl->wValue, ctrl->wIndex, ctrl->wLength);
- }
-
- /* respond with data transfer before status phase? */
- if (value >= 0) {
- req->length = value;
- req->zero = value < ctrl->wLength
- && (value % gadget->ep0->maxpacket) == 0;
- value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
- if (value < 0) {
- DBG (dev, "ep_queue < 0 --> %d\n", value);
- req->status = 0;
- zero_setup_complete (gadget->ep0, req);
- }
- }
-
- /* device either stalls (value < 0) or reports success */
- return value;
-}
-
-static void
-zero_disconnect (struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data (gadget);
- unsigned long flags;
-
- spin_lock_irqsave (&dev->lock, flags);
- zero_reset_config (dev);
-
- /* a more significant application might have some non-usb
- * activities to quiesce here, saving resources like power
- * or pushing the notification up a network stack.
- */
- spin_unlock_irqrestore (&dev->lock, flags);
-
- /* next we may get setup() calls to enumerate new connections;
- * or an unbind() during shutdown (including removing module).
- */
-}
-
-static void
-zero_autoresume (unsigned long _dev)
-{
- struct zero_dev *dev = (struct zero_dev *) _dev;
- int status;
-
- /* normally the host would be woken up for something
- * more significant than just a timer firing...
- */
- if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
- status = usb_gadget_wakeup (dev->gadget);
- DBG (dev, "wakeup --> %d\n", status);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void
-zero_unbind (struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data (gadget);
-
- DBG (dev, "unbind\n");
-
- /* we've already been disconnected ... no i/o is active */
- if (dev->req)
- free_ep_req (gadget->ep0, dev->req);
- del_timer_sync (&dev->resume);
- kfree (dev);
- set_gadget_data (gadget, NULL);
-}
-
-static int
-zero_bind (struct usb_gadget *gadget)
-{
- struct zero_dev *dev;
- //struct usb_ep *ep;
-
- printk("binding\n");
- /*
- * DRIVER POLICY CHOICE: you may want to do this differently.
- * One thing to avoid is reusing a bcdDevice revision code
- * with different host-visible configurations or behavior
- * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
- */
- //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
-
-
- /* ok, we made sense of the hardware ... */
- dev = kmalloc (sizeof *dev, SLAB_KERNEL);
- if (!dev)
- return -ENOMEM;
- memset (dev, 0, sizeof *dev);
- spin_lock_init (&dev->lock);
- dev->gadget = gadget;
- set_gadget_data (gadget, dev);
-
- /* preallocate control response and buffer */
- dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
- if (!dev->req)
- goto enomem;
- dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
- &dev->req->dma, GFP_KERNEL);
- if (!dev->req->buf)
- goto enomem;
-
- dev->req->complete = zero_setup_complete;
-
- device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- /* assume ep0 uses the same value for both speeds ... */
- dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-
- /* and that all endpoints are dual-speed */
- //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
- //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
-#endif
-
- usb_gadget_set_selfpowered (gadget);
-
- init_timer (&dev->resume);
- dev->resume.function = zero_autoresume;
- dev->resume.data = (unsigned long) dev;
-
- gadget->ep0->driver_data = dev;
-
- INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
- INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
- EP_OUT_NAME, EP_IN_NAME);
-
- snprintf (manufacturer, sizeof manufacturer,
- UTS_SYSNAME " " UTS_RELEASE " with %s",
- gadget->name);
-
- return 0;
-
-enomem:
- zero_unbind (gadget);
- return -ENOMEM;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void
-zero_suspend (struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data (gadget);
-
- if (gadget->speed == USB_SPEED_UNKNOWN)
- return;
-
- if (autoresume) {
- mod_timer (&dev->resume, jiffies + (HZ * autoresume));
- DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
- } else
- DBG (dev, "suspend\n");
-}
-
-static void
-zero_resume (struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data (gadget);
-
- DBG (dev, "resume\n");
- del_timer (&dev->resume);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static struct usb_gadget_driver zero_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- .speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif
- .function = (char *) longname,
- .bind = zero_bind,
- .unbind = zero_unbind,
-
- .setup = zero_setup,
- .disconnect = zero_disconnect,
-
- .suspend = zero_suspend,
- .resume = zero_resume,
-
- .driver = {
- .name = (char *) shortname,
- // .shutdown = ...
- // .suspend = ...
- // .resume = ...
- },
-};
-
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("Dual BSD/GPL");
-
-static struct proc_dir_entry *pdir, *pfile;
-
-static int isoc_read_data (char *page, char **start,
- off_t off, int count,
- int *eof, void *data)
-{
- int i;
- static int c = 0;
- static int done = 0;
- static int s = 0;
-
-/*
- printk ("\ncount: %d\n", count);
- printk ("rbuf_start: %d\n", rbuf_start);
- printk ("rbuf_len: %d\n", rbuf_len);
- printk ("off: %d\n", off);
- printk ("start: %p\n\n", *start);
-*/
- if (done) {
- c = 0;
- done = 0;
- *eof = 1;
- return 0;
- }
-
- if (c == 0) {
- if (rbuf_len == RBUF_LEN)
- s = rbuf_start;
- else s = 0;
- }
-
- for (i=0; i<count && c<rbuf_len; i++, c++) {
- page[i] = rbuf[(c+s) % RBUF_LEN];
- }
- *start = page;
-
- if (c >= rbuf_len) {
- *eof = 1;
- done = 1;
- }
-
-
- return i;
-}
-
-static int __init init (void)
-{
-
- int retval = 0;
-
- pdir = proc_mkdir("isoc_test", NULL);
- if(pdir == NULL) {
- retval = -ENOMEM;
- printk("Error creating dir\n");
- goto done;
- }
- pdir->owner = THIS_MODULE;
-
- pfile = create_proc_read_entry("isoc_data",
- 0444, pdir,
- isoc_read_data,
- NULL);
- if (pfile == NULL) {
- retval = -ENOMEM;
- printk("Error creating file\n");
- goto no_file;
- }
- pfile->owner = THIS_MODULE;
-
- return usb_gadget_register_driver (&zero_driver);
-
- no_file:
- remove_proc_entry("isoc_data", NULL);
- done:
- return retval;
-}
-module_init (init);
-
-static void __exit cleanup (void)
-{
-
- usb_gadget_unregister_driver (&zero_driver);
-
- remove_proc_entry("isoc_data", pdir);
- remove_proc_entry("isoc_test", NULL);
-}
-module_exit (cleanup);
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.c
deleted file mode 100644
index 85435379d0..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1064918 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The diagnostic interface will provide access to the controller for
- * bringing up the hardware and testing. The Linux driver attributes
- * feature will be used to provide the Linux Diagnostic
- * Interface. These attributes are accessed through sysfs.
- */
-
-/** @page "Linux Module Attributes"
- *
- * The Linux module attributes feature is used to provide the Linux
- * Diagnostic Interface. These attributes are accessed through sysfs.
- * The diagnostic interface will provide access to the controller for
- * bringing up the hardware and testing.
-
-
- The following table shows the attributes.
- <table>
- <tr>
- <td><b> Name</b></td>
- <td><b> Description</b></td>
- <td><b> Access</b></td>
- </tr>
-
- <tr>
- <td> mode </td>
- <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hnpcapable </td>
- <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
- Read returns the current value.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> srpcapable </td>
- <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
- Read returns the current value.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> hnp </td>
- <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> srp </td>
- <td> Initiates the Session Request Protocol. Read returns the status.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> buspower </td>
- <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> bussuspend </td>
- <td> Suspends the USB bus.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> busconnected </td>
- <td> Gets the connection status of the bus</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> gotgctl </td>
- <td> Gets or sets the Core Control Status Register.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gusbcfg </td>
- <td> Gets or sets the Core USB Configuration Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> grxfsiz </td>
- <td> Gets or sets the Receive FIFO Size Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gnptxfsiz </td>
- <td> Gets or sets the non-periodic Transmit Size Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gpvndctl </td>
- <td> Gets or sets the PHY Vendor Control Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> ggpio </td>
- <td> Gets the value in the lower 16-bits of the General Purpose IO Register
- or sets the upper 16 bits.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> guid </td>
- <td> Gets or sets the value of the User ID Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gsnpsid </td>
- <td> Gets the value of the Synopsys ID Regester</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> devspeed </td>
- <td> Gets or sets the device speed setting in the DCFG register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> enumspeed </td>
- <td> Gets the device enumeration Speed.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hptxfsiz </td>
- <td> Gets the value of the Host Periodic Transmit FIFO</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hprt0 </td>
- <td> Gets or sets the value in the Host Port Control and Status Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regoffset </td>
- <td> Sets the register offset for the next Register Access</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regvalue </td>
- <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> remote_wakeup </td>
- <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
- wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
- Wakeup signalling bit in the Device Control Register is set for 1
- milli-second.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regdump </td>
- <td> Dumps the contents of core registers.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> spramdump </td>
- <td> Dumps the contents of core registers.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hcddump </td>
- <td> Dumps the current HCD state.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hcd_frrem </td>
- <td> Shows the average value of the Frame Remaining
- field in the Host Frame Number/Frame Remaining register when an SOF interrupt
- occurs. This can be used to determine the average interrupt latency. Also
- shows the average Frame Remaining value for start_transfer and the "a" and
- "b" sample points. The "a" and "b" sample points may be used during debugging
- bto determine how long it takes to execute a section of the HCD code.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> rd_reg_test </td>
- <td> Displays the time required to read the GNPTXFSIZ register many times
- (the output shows the number of times the register is read).
- <td> Read</td>
- </tr>
-
- <tr>
- <td> wr_reg_test </td>
- <td> Displays the time required to write the GNPTXFSIZ register many times
- (the output shows the number of times the register is written).
- <td> Read</td>
- </tr>
-
- </table>
-
- Example usage:
- To get the current mode:
- cat /sys/devices/lm0/mode
-
- To power down the USB:
- echo 0 > /sys/devices/lm0/buspower
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/stat.h> /* permission constants */
-#include <linux/version.h>
-
-#include <asm/io.h>
-
-#include "linux/dwc_otg_plat.h"
-#include "dwc_otg_attr.h"
-#include "dwc_otg_driver.h"
-#include "dwc_otg_pcd.h"
-#include "dwc_otg_hcd.h"
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-/*
- * MACROs for defining sysfs attribute
- */
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
- uint32_t val; \
- val = dwc_read_reg32 (_addr_); \
- val = (val & (_mask_)) >> _shift_; \
- return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
- uint32_t set = simple_strtoul(buf, NULL, 16); \
- uint32_t clear = set; \
- clear = ((~clear) << _shift_) & _mask_; \
- set = (set << _shift_) & _mask_; \
- dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
- dwc_modify_reg32(_addr_, clear, set); \
- return count; \
-}
-
-/*
- * MACROs for defining sysfs attribute for 32-bit registers
- */
-#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
- uint32_t val; \
- val = dwc_read_reg32 (_addr_); \
- return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
- uint32_t val = simple_strtoul(buf, NULL, 16); \
- dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
- dwc_write_reg32(_addr_, val); \
- return count; \
-}
-
-#else
-
-/*
- * MACROs for defining sysfs attribute
- */
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t val; \
- val = dwc_read_reg32 (_addr_); \
- val = (val & (_mask_)) >> _shift_; \
- return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t set = simple_strtoul(buf, NULL, 16); \
- uint32_t clear = set; \
- clear = ((~clear) << _shift_) & _mask_; \
- set = (set << _shift_) & _mask_; \
- dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
- dwc_modify_reg32(_addr_, clear, set); \
- return count; \
-}
-
-/*
- * MACROs for defining sysfs attribute for 32-bit registers
- */
-#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t val; \
- val = dwc_read_reg32 (_addr_); \
- return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t val = simple_strtoul(buf, NULL, 16); \
- dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
- dwc_write_reg32(_addr_, val); \
- return count; \
-}
-
-#endif
-
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-
-#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-
-#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-
-
-/** @name Functions for Show/Store of Attributes */
-/**@{*/
-
-/**
- * Show the register offset of the Register Access.
- */
-static ssize_t regoffset_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
-}
-
-/**
- * Set the register offset for the next Register Access Read/Write
- */
-static ssize_t regoffset_store( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- uint32_t offset = simple_strtoul(buf, NULL, 16);
- //dev_dbg(_dev, "Offset=0x%08x\n", offset);
- if (offset < 0x00040000 ) {
- otg_dev->reg_offset = offset;
- }
- else {
- dev_err( _dev, "invalid offset\n" );
- }
-
- return count;
-}
-DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store);
-
-
-/**
- * Show the value of the register at the offset in the reg_offset
- * attribute.
- */
-static ssize_t regvalue_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- uint32_t val;
- volatile uint32_t *addr;
-
- if (otg_dev->reg_offset != 0xFFFFFFFF &&
- 0 != otg_dev->base) {
- /* Calculate the address */
- addr = (uint32_t*)(otg_dev->reg_offset +
- (uint8_t*)otg_dev->base);
- //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
- val = dwc_read_reg32( addr );
- return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
- "Reg@0x%06x = 0x%08x\n",
- otg_dev->reg_offset, val);
- }
- else {
- dev_err(_dev, "Invalid offset (0x%0x)\n",
- otg_dev->reg_offset);
- return sprintf(buf, "invalid offset\n" );
- }
-}
-
-/**
- * Store the value in the register at the offset in the reg_offset
- * attribute.
- *
- */
-static ssize_t regvalue_store( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- volatile uint32_t * addr;
- uint32_t val = simple_strtoul(buf, NULL, 16);
- //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
- if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
- /* Calculate the address */
- addr = (uint32_t*)(otg_dev->reg_offset +
- (uint8_t*)otg_dev->base);
- //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
- dwc_write_reg32( addr, val );
- }
- else {
- dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
- otg_dev->reg_offset);
- }
- return count;
-}
-DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
-
-/*
- * Attributes
- */
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
-
-//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
-
-DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
-DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
-DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
-DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
-DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
-
-DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
-
-
-/**
- * @todo Add code to initiate the HNP.
- */
-/**
- * Show the HNP status bit
- */
-static ssize_t hnp_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- gotgctl_data_t val;
- val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
- return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
-}
-
-/**
- * Set the HNP Request bit
- */
-static ssize_t hnp_store( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- uint32_t in = simple_strtoul(buf, NULL, 16);
- uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
- gotgctl_data_t mem;
- mem.d32 = dwc_read_reg32(addr);
- mem.b.hnpreq = in;
- dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
- dwc_write_reg32(addr, mem.d32);
- return count;
-}
-DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
-
-/**
- * @todo Add code to initiate the SRP.
- */
-/**
- * Show the SRP status bit
- */
-static ssize_t srp_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
-#ifndef DWC_HOST_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- gotgctl_data_t val;
- val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
- return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
-#else
- return sprintf(buf, "Host Only Mode!\n");
-#endif
-}
-
-
-
-/**
- * Set the SRP Request bit
- */
-static ssize_t srp_store( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- const char *buf,
- size_t count )
-{
-#ifndef DWC_HOST_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- dwc_otg_pcd_initiate_srp(otg_dev->pcd);
-#endif
- return count;
-}
-DEVICE_ATTR(srp, 0644, srp_show, srp_store);
-
-/**
- * @todo Need to do more for power on/off?
- */
-/**
- * Show the Bus Power status
- */
-static ssize_t buspower_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- hprt0_data_t val;
- val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
- return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
-}
-
-
-/**
- * Set the Bus Power status
- */
-static ssize_t buspower_store( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- uint32_t on = simple_strtoul(buf, NULL, 16);
- uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
- hprt0_data_t mem;
-
- mem.d32 = dwc_read_reg32(addr);
- mem.b.prtpwr = on;
-
- //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
- dwc_write_reg32(addr, mem.d32);
-
- return count;
-}
-DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
-
-/**
- * @todo Need to do more for suspend?
- */
-/**
- * Show the Bus Suspend status
- */
-static ssize_t bussuspend_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- hprt0_data_t val;
- val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
- return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-}
-
-/**
- * Set the Bus Suspend status
- */
-static ssize_t bussuspend_store( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- uint32_t in = simple_strtoul(buf, NULL, 16);
- uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
- hprt0_data_t mem;
- mem.d32 = dwc_read_reg32(addr);
- mem.b.prtsusp = in;
- dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
- dwc_write_reg32(addr, mem.d32);
- return count;
-}
-DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
-
-/**
- * Show the status of Remote Wakeup.
- */
-static ssize_t remote_wakeup_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
-#ifndef DWC_HOST_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- dctl_data_t val;
- val.d32 =
- dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
- return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
- val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
-#else
- return sprintf(buf, "Host Only Mode!\n");
-#endif
-}
-/**
- * Initiate a remote wakeup of the host. The Device control register
- * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
- * flag is set.
- *
- */
-static ssize_t remote_wakeup_store( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- const char *buf,
- size_t count )
-{
-#ifndef DWC_HOST_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- uint32_t val = simple_strtoul(buf, NULL, 16);
- if (val&1) {
- dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
- }
- else {
- dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
- }
-#endif
- return count;
-}
-DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show,
- remote_wakeup_store);
-
-/**
- * Dump global registers and either host or device registers (depending on the
- * current mode of the core).
- */
-static ssize_t regdump_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- dwc_otg_dump_global_registers( otg_dev->core_if);
- if (dwc_otg_is_host_mode(otg_dev->core_if)) {
- dwc_otg_dump_host_registers( otg_dev->core_if);
- } else {
- dwc_otg_dump_dev_registers( otg_dev->core_if);
-
- }
- return sprintf( buf, "Register Dump\n" );
-}
-
-DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
-
-/**
- * Dump global registers and either host or device registers (depending on the
- * current mode of the core).
- */
-static ssize_t spramdump_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- dwc_otg_dump_spram( otg_dev->core_if);
-
- return sprintf( buf, "SPRAM Dump\n" );
-}
-
-DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0);
-
-/**
- * Dump the current hcd state.
- */
-static ssize_t hcddump_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
-#ifndef DWC_DEVICE_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- dwc_otg_hcd_dump_state(otg_dev->hcd);
-#endif
- return sprintf( buf, "HCD Dump\n" );
-}
-
-DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
-
-/**
- * Dump the average frame remaining at SOF. This can be used to
- * determine average interrupt latency. Frame remaining is also shown for
- * start transfer and two additional sample points.
- */
-static ssize_t hcd_frrem_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
-#ifndef DWC_DEVICE_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- dwc_otg_hcd_dump_frrem(otg_dev->hcd);
-#endif
- return sprintf( buf, "HCD Dump Frame Remaining\n" );
-}
-
-DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
-
-/**
- * Displays the time required to read the GNPTXFSIZ register many times (the
- * output shows the number of times the register is read).
- */
-#define RW_REG_COUNT 10000000
-#define MSEC_PER_JIFFIE 1000/HZ
-static ssize_t rd_reg_test_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- int i;
- int time;
- int start_jiffies;
-
- printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
- HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
- start_jiffies = jiffies;
- for (i = 0; i < RW_REG_COUNT; i++) {
- dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
- }
- time = jiffies - start_jiffies;
- return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
- RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
-}
-
-DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
-
-/**
- * Displays the time required to write the GNPTXFSIZ register many times (the
- * output shows the number of times the register is written).
- */
-static ssize_t wr_reg_test_show( struct device *_dev,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct device_attribute *attr,
-#endif
- char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- uint32_t reg_val;
- int i;
- int time;
- int start_jiffies;
-
- printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
- HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
- reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
- start_jiffies = jiffies;
- for (i = 0; i < RW_REG_COUNT; i++) {
- dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
- }
- time = jiffies - start_jiffies;
- return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
- RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-}
-
-DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
-/**@}*/
-
-/**
- * Create the device files
- */
-void dwc_otg_attr_create (struct device *dev)
-{
- int error;
-
- error = device_create_file(dev, &dev_attr_regoffset);
- error = device_create_file(dev, &dev_attr_regvalue);
- error = device_create_file(dev, &dev_attr_mode);
- error = device_create_file(dev, &dev_attr_hnpcapable);
- error = device_create_file(dev, &dev_attr_srpcapable);
- error = device_create_file(dev, &dev_attr_hnp);
- error = device_create_file(dev, &dev_attr_srp);
- error = device_create_file(dev, &dev_attr_buspower);
- error = device_create_file(dev, &dev_attr_bussuspend);
- error = device_create_file(dev, &dev_attr_busconnected);
- error = device_create_file(dev, &dev_attr_gotgctl);
- error = device_create_file(dev, &dev_attr_gusbcfg);
- error = device_create_file(dev, &dev_attr_grxfsiz);
- error = device_create_file(dev, &dev_attr_gnptxfsiz);
- error = device_create_file(dev, &dev_attr_gpvndctl);
- error = device_create_file(dev, &dev_attr_ggpio);
- error = device_create_file(dev, &dev_attr_guid);
- error = device_create_file(dev, &dev_attr_gsnpsid);
- error = device_create_file(dev, &dev_attr_devspeed);
- error = device_create_file(dev, &dev_attr_enumspeed);
- error = device_create_file(dev, &dev_attr_hptxfsiz);
- error = device_create_file(dev, &dev_attr_hprt0);
- error = device_create_file(dev, &dev_attr_remote_wakeup);
- error = device_create_file(dev, &dev_attr_regdump);
- error = device_create_file(dev, &dev_attr_spramdump);
- error = device_create_file(dev, &dev_attr_hcddump);
- error = device_create_file(dev, &dev_attr_hcd_frrem);
- error = device_create_file(dev, &dev_attr_rd_reg_test);
- error = device_create_file(dev, &dev_attr_wr_reg_test);
-}
-
-/**
- * Remove the device files
- */
-void dwc_otg_attr_remove (struct device *dev)
-{
- device_remove_file(dev, &dev_attr_regoffset);
- device_remove_file(dev, &dev_attr_regvalue);
- device_remove_file(dev, &dev_attr_mode);
- device_remove_file(dev, &dev_attr_hnpcapable);
- device_remove_file(dev, &dev_attr_srpcapable);
- device_remove_file(dev, &dev_attr_hnp);
- device_remove_file(dev, &dev_attr_srp);
- device_remove_file(dev, &dev_attr_buspower);
- device_remove_file(dev, &dev_attr_bussuspend);
- device_remove_file(dev, &dev_attr_busconnected);
- device_remove_file(dev, &dev_attr_gotgctl);
- device_remove_file(dev, &dev_attr_gusbcfg);
- device_remove_file(dev, &dev_attr_grxfsiz);
- device_remove_file(dev, &dev_attr_gnptxfsiz);
- device_remove_file(dev, &dev_attr_gpvndctl);
- device_remove_file(dev, &dev_attr_ggpio);
- device_remove_file(dev, &dev_attr_guid);
- device_remove_file(dev, &dev_attr_gsnpsid);
- device_remove_file(dev, &dev_attr_devspeed);
- device_remove_file(dev, &dev_attr_enumspeed);
- device_remove_file(dev, &dev_attr_hptxfsiz);
- device_remove_file(dev, &dev_attr_hprt0);
- device_remove_file(dev, &dev_attr_remote_wakeup);
- device_remove_file(dev, &dev_attr_regdump);
- device_remove_file(dev, &dev_attr_spramdump);
- device_remove_file(dev, &dev_attr_hcddump);
- device_remove_file(dev, &dev_attr_hcd_frrem);
- device_remove_file(dev, &dev_attr_rd_reg_test);
- device_remove_file(dev, &dev_attr_wr_reg_test);
-}
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.h
deleted file mode 100644
index 0862b2711b..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 477051 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_OTG_ATTR_H__)
-#define __DWC_OTG_ATTR_H__
-
-/** @file
- * This file contains the interface to the Linux device attributes.
- */
-extern struct device_attribute dev_attr_regoffset;
-extern struct device_attribute dev_attr_regvalue;
-
-extern struct device_attribute dev_attr_mode;
-extern struct device_attribute dev_attr_hnpcapable;
-extern struct device_attribute dev_attr_srpcapable;
-extern struct device_attribute dev_attr_hnp;
-extern struct device_attribute dev_attr_srp;
-extern struct device_attribute dev_attr_buspower;
-extern struct device_attribute dev_attr_bussuspend;
-extern struct device_attribute dev_attr_busconnected;
-extern struct device_attribute dev_attr_gotgctl;
-extern struct device_attribute dev_attr_gusbcfg;
-extern struct device_attribute dev_attr_grxfsiz;
-extern struct device_attribute dev_attr_gnptxfsiz;
-extern struct device_attribute dev_attr_gpvndctl;
-extern struct device_attribute dev_attr_ggpio;
-extern struct device_attribute dev_attr_guid;
-extern struct device_attribute dev_attr_gsnpsid;
-extern struct device_attribute dev_attr_devspeed;
-extern struct device_attribute dev_attr_enumspeed;
-extern struct device_attribute dev_attr_hptxfsiz;
-extern struct device_attribute dev_attr_hprt0;
-
-void dwc_otg_attr_create (struct device *dev);
-void dwc_otg_attr_remove (struct device *dev);
-
-#endif
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.c
deleted file mode 100644
index 89aa83ec90..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.c
+++ /dev/null
@@ -1,3692 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
- * $Revision: 1.7 $
- * $Date: 2008-12-22 11:43:05 $
- * $Change: 1117667 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The Core Interface Layer provides basic services for accessing and
- * managing the DWC_otg hardware. These services are used by both the
- * Host Controller Driver and the Peripheral Controller Driver.
- *
- * The CIL manages the memory map for the core so that the HCD and PCD
- * don't have to do this separately. It also handles basic tasks like
- * reading/writing the registers and data FIFOs in the controller.
- * Some of the data access functions provide encapsulation of several
- * operations required to perform a task, such as writing multiple
- * registers to start a transfer. Finally, the CIL performs basic
- * services that are not specific to either the host or device modes
- * of operation. These services include management of the OTG Host
- * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
- * Diagnostic API is also provided to allow testing of the controller
- * hardware.
- *
- * The Core Interface Layer has the following requirements:
- * - Provides basic controller operations.
- * - Minimal use of OS services.
- * - The OS services used will be abstracted by using inline functions
- * or macros.
- *
- */
-#include <asm/unaligned.h>
-#include <linux/dma-mapping.h>
-#ifdef DEBUG
-#include <linux/jiffies.h>
-#endif
-
-#include "linux/dwc_otg_plat.h"
-#include "dwc_otg_regs.h"
-#include "dwc_otg_cil.h"
-
-/* Included only to access hc->qh for non-dword buffer handling
- * TODO: account it
- */
-#include "dwc_otg_hcd.h"
-
-/**
- * This function is called to initialize the DWC_otg CSR data
- * structures. The register addresses in the device and host
- * structures are initialized from the base address supplied by the
- * caller. The calling function must make the OS calls to get the
- * base address of the DWC_otg controller registers. The core_params
- * argument holds the parameters that specify how the core should be
- * configured.
- *
- * @param[in] reg_base_addr Base address of DWC_otg core registers
- * @param[in] core_params Pointer to the core configuration parameters
- *
- */
-dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
- dwc_otg_core_params_t *core_params)
-{
- dwc_otg_core_if_t *core_if = 0;
- dwc_otg_dev_if_t *dev_if = 0;
- dwc_otg_host_if_t *host_if = 0;
- uint8_t *reg_base = (uint8_t *)reg_base_addr;
- int i = 0;
-
- DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
-
- core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
-
- if (core_if == 0) {
- DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
- return 0;
- }
-
- memset(core_if, 0, sizeof(dwc_otg_core_if_t));
-
- core_if->core_params = core_params;
- core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
-
- /*
- * Allocate the Device Mode structures.
- */
- dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
-
- if (dev_if == 0) {
- DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
- kfree(core_if);
- return 0;
- }
-
- dev_if->dev_global_regs =
- (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
-
- for (i=0; i<MAX_EPS_CHANNELS; i++)
- {
- dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
- (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
- (i * DWC_EP_REG_OFFSET));
-
- dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
- (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
- (i * DWC_EP_REG_OFFSET));
- DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
- i, &dev_if->in_ep_regs[i]->diepctl);
- DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
- i, &dev_if->out_ep_regs[i]->doepctl);
- }
-
- dev_if->speed = 0; // unknown
-
- core_if->dev_if = dev_if;
-
- /*
- * Allocate the Host Mode structures.
- */
- host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
-
- if (host_if == 0) {
- DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
- kfree(dev_if);
- kfree(core_if);
- return 0;
- }
-
- host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
- (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
-
- host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
-
- for (i=0; i<MAX_EPS_CHANNELS; i++)
- {
- host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
- (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
- (i * DWC_OTG_CHAN_REGS_OFFSET));
- DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
- i, &host_if->hc_regs[i]->hcchar);
- }
-
- host_if->num_host_channels = MAX_EPS_CHANNELS;
- core_if->host_if = host_if;
-
- for (i=0; i<MAX_EPS_CHANNELS; i++)
- {
- core_if->data_fifo[i] =
- (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
- (i * DWC_OTG_DATA_FIFO_SIZE));
- DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
- i, (unsigned)core_if->data_fifo[i]);
- }
-
- core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
-
- /*
- * Store the contents of the hardware configuration registers here for
- * easy access later.
- */
- core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
- core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
- core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
- core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
-
- DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
- DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
- DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
- DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
-
- core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
- core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-
- DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
- DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
-
- DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
- DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
- DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
- DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
- DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
- DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
- DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
-
- DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
- DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
-
- /*
- * Set the SRP sucess bit for FS-I2c
- */
- core_if->srp_success = 0;
- core_if->srp_timer_started = 0;
-
-
- /*
- * Create new workqueue and init works
- */
- core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
- if(core_if->wq_otg == 0) {
- DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
- kfree(host_if);
- kfree(dev_if);
- kfree(core_if);
- return 0 * HZ;
- }
-
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-
- INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
- INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
-
-#else
-
- INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
- INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
-
-#endif
- return core_if;
-}
-
-/**
- * This function frees the structures allocated by dwc_otg_cil_init().
- *
- * @param[in] core_if The core interface pointer returned from
- * dwc_otg_cil_init().
- *
- */
-void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
-{
- /* Disable all interrupts */
- dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
- dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
-
- if (core_if->wq_otg) {
- destroy_workqueue(core_if->wq_otg);
- }
- if (core_if->dev_if) {
- kfree(core_if->dev_if);
- }
- if (core_if->host_if) {
- kfree(core_if->host_if);
- }
- kfree(core_if);
-}
-
-/**
- * This function enables the controller's Global Interrupt in the AHB Config
- * register.
- *
- * @param[in] core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
-{
- gahbcfg_data_t ahbcfg = { .d32 = 0};
- ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
- dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-}
-
-/**
- * This function disables the controller's Global Interrupt in the AHB Config
- * register.
- *
- * @param[in] core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
-{
- gahbcfg_data_t ahbcfg = { .d32 = 0};
- ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
- dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-}
-
-/**
- * This function initializes the commmon interrupts, used in both
- * device and host modes.
- *
- * @param[in] core_if Programming view of the DWC_otg controller
- *
- */
-static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
- gintmsk_data_t intr_mask = { .d32 = 0};
-
- /* Clear any pending OTG Interrupts */
- dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
-
- /* Clear any pending interrupts */
- dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-
- /*
- * Enable the interrupts in the GINTMSK.
- */
- intr_mask.b.modemismatch = 1;
- intr_mask.b.otgintr = 1;
-
- if (!core_if->dma_enable) {
- intr_mask.b.rxstsqlvl = 1;
- }
-
- intr_mask.b.conidstschng = 1;
- intr_mask.b.wkupintr = 1;
- intr_mask.b.disconnect = 1;
- intr_mask.b.usbsuspend = 1;
- intr_mask.b.sessreqintr = 1;
- dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
-}
-
-/**
- * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
- * type.
- */
-static void init_fslspclksel(dwc_otg_core_if_t *core_if)
-{
- uint32_t val;
- hcfg_data_t hcfg;
-
- if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
- (core_if->hwcfg2.b.fs_phy_type == 1) &&
- (core_if->core_params->ulpi_fs_ls)) ||
- (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
- /* Full speed PHY */
- val = DWC_HCFG_48_MHZ;
- }
- else {
- /* High speed PHY running at full speed or high speed */
- val = DWC_HCFG_30_60_MHZ;
- }
-
- DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
- hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
- hcfg.b.fslspclksel = val;
- dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-}
-
-/**
- * Initializes the DevSpd field of the DCFG register depending on the PHY type
- * and the enumeration speed of the device.
- */
-static void init_devspd(dwc_otg_core_if_t *core_if)
-{
- uint32_t val;
- dcfg_data_t dcfg;
-
- if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
- (core_if->hwcfg2.b.fs_phy_type == 1) &&
- (core_if->core_params->ulpi_fs_ls)) ||
- (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
- /* Full speed PHY */
- val = 0x3;
- }
- else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
- /* High speed PHY running at full speed */
- val = 0x1;
- }
- else {
- /* High speed PHY running at high speed */
- val = 0x0;
- }
-
- DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
-
- dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
- dcfg.b.devspd = val;
- dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-}
-
-/**
- * This function calculates the number of IN EPS
- * using GHWCFG1 and GHWCFG2 registers values
- *
- * @param core_if Programming view of the DWC_otg controller
- */
-static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
-{
- uint32_t num_in_eps = 0;
- uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
- uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
- uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
- int i;
-
-
- for(i = 0; i < num_eps; ++i)
- {
- if(!(hwcfg1 & 0x1))
- num_in_eps++;
-
- hwcfg1 >>= 2;
- }
-
- if(core_if->hwcfg4.b.ded_fifo_en) {
- num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
- }
-
- return num_in_eps;
-}
-
-
-/**
- * This function calculates the number of OUT EPS
- * using GHWCFG1 and GHWCFG2 registers values
- *
- * @param core_if Programming view of the DWC_otg controller
- */
-static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
-{
- uint32_t num_out_eps = 0;
- uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
- uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
- int i;
-
- for(i = 0; i < num_eps; ++i)
- {
- if(!(hwcfg1 & 0x2))
- num_out_eps++;
-
- hwcfg1 >>= 2;
- }
- return num_out_eps;
-}
-/**
- * This function initializes the DWC_otg controller registers and
- * prepares the core for device mode or host mode operation.
- *
- * @param core_if Programming view of the DWC_otg controller
- *
- */
-void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
-{
- int i = 0;
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- gahbcfg_data_t ahbcfg = { .d32 = 0 };
- gusbcfg_data_t usbcfg = { .d32 = 0 };
- gi2cctl_data_t i2cctl = { .d32 = 0 };
-
- DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
-
- /* Common Initialization */
-
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-
-// usbcfg.b.tx_end_delay = 1;
- /* Program the ULPI External VBUS bit if needed */
- usbcfg.b.ulpi_ext_vbus_drv =
- (core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
-
- /* Set external TS Dline pulsing */
- usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
- dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
-
- /* Reset the Controller */
- dwc_otg_core_reset(core_if);
-
- /* Initialize parameters from Hardware configuration registers. */
- dev_if->num_in_eps = calc_num_in_eps(core_if);
- dev_if->num_out_eps = calc_num_out_eps(core_if);
-
-
- DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
-
- for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- {
- dev_if->perio_tx_fifo_size[i] =
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
- DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
- i, dev_if->perio_tx_fifo_size[i]);
- }
-
- for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
- {
- dev_if->tx_fifo_size[i] =
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
- DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
- i, dev_if->perio_tx_fifo_size[i]);
- }
-
- core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
- core_if->rx_fifo_size =
- dwc_read_reg32(&global_regs->grxfsiz);
- core_if->nperio_tx_fifo_size =
- dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
-
- DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
-
- /* This programming sequence needs to happen in FS mode before any other
- * programming occurs */
- if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
- (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
- /* If FS mode with FS PHY */
-
- /* core_init() is now called on every switch so only call the
- * following for the first time through. */
- if (!core_if->phy_init_done) {
- core_if->phy_init_done = 1;
- DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.physel = 1;
- dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
- /* Reset after a PHY select */
- dwc_otg_core_reset(core_if);
- }
-
- /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
- * do this on HNP Dev/Host mode switches (done in dev_init and
- * host_init). */
- if (dwc_otg_is_host_mode(core_if)) {
- init_fslspclksel(core_if);
- }
- else {
- init_devspd(core_if);
- }
-
- if (core_if->core_params->i2c_enable) {
- DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
- /* Program GUSBCFG.OtgUtmifsSel to I2C */
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.otgutmifssel = 1;
- dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
- /* Program GI2CCTL.I2CEn */
- i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
- i2cctl.b.i2cdevaddr = 1;
- i2cctl.b.i2cen = 0;
- dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
- i2cctl.b.i2cen = 1;
- dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
- }
-
- } /* endif speed == DWC_SPEED_PARAM_FULL */
-
- else {
- /* High speed PHY. */
- if (!core_if->phy_init_done) {
- core_if->phy_init_done = 1;
- /* HS PHY parameters. These parameters are preserved
- * during soft reset so only program the first time. Do
- * a soft reset immediately after setting phyif. */
- usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
- if (usbcfg.b.ulpi_utmi_sel == 1) {
- /* ULPI interface */
- usbcfg.b.phyif = 0;
- usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
- }
- else {
- /* UTMI+ interface */
- if (core_if->core_params->phy_utmi_width == 16) {
- usbcfg.b.phyif = 1;
- }
- else {
- usbcfg.b.phyif = 0;
- }
- }
-
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-
- /* Reset after setting the PHY parameters */
- dwc_otg_core_reset(core_if);
- }
- }
-
- if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
- (core_if->hwcfg2.b.fs_phy_type == 1) &&
- (core_if->core_params->ulpi_fs_ls)) {
- DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.ulpi_fsls = 1;
- usbcfg.b.ulpi_clk_sus_m = 1;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- }
- else {
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.ulpi_fsls = 0;
- usbcfg.b.ulpi_clk_sus_m = 0;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- }
-
- /* Program the GAHBCFG Register.*/
- switch (core_if->hwcfg2.b.architecture) {
-
- case DWC_SLAVE_ONLY_ARCH:
- DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
- ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
- ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
- core_if->dma_enable = 0;
- core_if->dma_desc_enable = 0;
- break;
-
- case DWC_EXT_DMA_ARCH:
- DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
- ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
- core_if->dma_enable = (core_if->core_params->dma_enable != 0);
- core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
- break;
-
- case DWC_INT_DMA_ARCH:
- DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
- ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
- core_if->dma_enable = (core_if->core_params->dma_enable != 0);
- core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
- break;
-
- }
- ahbcfg.b.dmaenable = core_if->dma_enable;
- dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
-
- core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
-
- core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
- core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
- DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
- DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
-
- /*
- * Program the GUSBCFG register.
- */
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-
- switch (core_if->hwcfg2.b.op_mode) {
- case DWC_MODE_HNP_SRP_CAPABLE:
- usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
- DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
- usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_SRP_ONLY_CAPABLE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_NO_HNP_SRP_CAPABLE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- break;
-
- case DWC_MODE_SRP_CAPABLE_DEVICE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- break;
-
- case DWC_MODE_SRP_CAPABLE_HOST:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_NO_SRP_CAPABLE_HOST:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- break;
- }
-
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-
- /* Enable common interrupts */
- dwc_otg_enable_common_interrupts(core_if);
-
- /* Do device or host intialization based on mode during PCD
- * and HCD initialization */
- if (dwc_otg_is_host_mode(core_if)) {
- DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
- core_if->op_state = A_HOST;
- }
- else {
- DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
- core_if->op_state = B_PERIPHERAL;
-#ifdef DWC_DEVICE_ONLY
- dwc_otg_core_dev_init(core_if);
-#endif
- }
-}
-
-
-/**
- * This function enables the Device mode interrupts.
- *
- * @param core_if Programming view of DWC_otg controller
- */
-void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
-{
- gintmsk_data_t intr_mask = { .d32 = 0};
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
-
- DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
- /* Disable all interrupts. */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* Clear any pending interrupts */
- dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-
- /* Enable the common interrupts */
- dwc_otg_enable_common_interrupts(core_if);
-
- /* Enable interrupts */
- intr_mask.b.usbreset = 1;
- intr_mask.b.enumdone = 1;
-
- if(!core_if->multiproc_int_enable) {
- intr_mask.b.inepintr = 1;
- intr_mask.b.outepintr = 1;
- }
-
- intr_mask.b.erlysuspend = 1;
-
- if(core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.epmismatch = 1;
- }
-
-
-#ifdef DWC_EN_ISOC
- if(core_if->dma_enable) {
- if(core_if->dma_desc_enable == 0) {
- if(core_if->pti_enh_enable) {
- dctl_data_t dctl = { .d32 = 0 };
- dctl.b.ifrmnum = 1;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
- } else {
- intr_mask.b.incomplisoin = 1;
- intr_mask.b.incomplisoout = 1;
- }
- }
- } else {
- intr_mask.b.incomplisoin = 1;
- intr_mask.b.incomplisoout = 1;
- }
-#endif // DWC_EN_ISOC
-
-/** @todo NGS: Should this be a module parameter? */
-#ifdef USE_PERIODIC_EP
- intr_mask.b.isooutdrop = 1;
- intr_mask.b.eopframe = 1;
- intr_mask.b.incomplisoin = 1;
- intr_mask.b.incomplisoout = 1;
-#endif
-
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-
- DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
- dwc_read_reg32(&global_regs->gintmsk));
-}
-
-/**
- * This function initializes the DWC_otg controller registers for
- * device mode.
- *
- * @param core_if Programming view of DWC_otg controller
- *
- */
-void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
-{
- int i;
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- dwc_otg_core_params_t *params = core_if->core_params;
- dcfg_data_t dcfg = { .d32 = 0};
- grstctl_t resetctl = { .d32 = 0 };
- uint32_t rx_fifo_size;
- fifosize_data_t nptxfifosize;
- fifosize_data_t txfifosize;
- dthrctl_data_t dthrctl;
- fifosize_data_t ptxfifosize;
-
- /* Restart the Phy Clock */
- dwc_write_reg32(core_if->pcgcctl, 0);
-
- /* Device configuration register */
- init_devspd(core_if);
- dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
- dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
- dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
-
- dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-
- /* Configure data FIFO sizes */
- if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
- DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
-
- /* Rx FIFO */
- DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->grxfsiz));
-
- rx_fifo_size = params->dev_rx_fifo_size;
- dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
-
- DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->grxfsiz));
-
- /** Set Periodic Tx FIFO Mask all bits 0 */
- core_if->p_tx_msk = 0;
-
- /** Set Tx FIFO Mask all bits 0 */
- core_if->tx_msk = 0;
-
- if(core_if->en_multiple_tx_fifo == 0) {
- /* Non-periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
-
- nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
- nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-
- dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-
- DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
-
- /**@todo NGS: Fix Periodic FIFO Sizing! */
- /*
- * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
- * Indexes of the FIFO size module parameters in the
- * dev_perio_tx_fifo_size array and the FIFO size registers in
- * the dptxfsiz array run from 0 to 14.
- */
- /** @todo Finish debug of this */
- ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
- for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- {
- ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
- DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
- dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
- ptxfifosize.d32);
- DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
- ptxfifosize.b.startaddr += ptxfifosize.b.depth;
- }
- }
- else {
- /*
- * Tx FIFOs These FIFOs are numbered from 1 to 15.
- * Indexes of the FIFO size module parameters in the
- * dev_tx_fifo_size array and the FIFO size registers in
- * the dptxfsiz_dieptxf array run from 0 to 14.
- */
-
-
- /* Non-periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
-
- nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
- nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-
- dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-
- DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
-
- txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
- /*
- Modify by kaiker ,for RT3052 device mode config
-
- In RT3052,Since the _core_if->hwcfg4.b.num_dev_perio_in_ep is
- configed to 0 so these TX_FIF0 not config.IN EP will can't
- more than 1 if not modify it.
-
- */
-#if 1
- for (i=1 ; i <= dev_if->num_in_eps; i++)
-#else
- for (i=1; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-#endif
- {
-
- txfifosize.b.depth = params->dev_tx_fifo_size[i];
-
- DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-
- dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i-1],
- txfifosize.d32);
-
- DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
-
- txfifosize.b.startaddr += txfifosize.b.depth;
- }
- }
- }
- /* Flush the FIFOs */
- dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
- dwc_otg_flush_rx_fifo(core_if);
-
- /* Flush the Learning Queue. */
- resetctl.b.intknqflsh = 1;
- dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-
- /* Clear all pending Device Interrupts */
-
- if(core_if->multiproc_int_enable) {
- }
-
- /** @todo - if the condition needed to be checked
- * or in any case all pending interrutps should be cleared?
- */
- if(core_if->multiproc_int_enable) {
- for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
- dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
- }
-
- for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
- dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
- }
-
- dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
- dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
- } else {
- dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
- dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
- dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
- dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
- }
-
- for (i=0; i <= dev_if->num_in_eps; i++)
- {
- depctl_data_t depctl;
- depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
- if (depctl.b.epena) {
- depctl.d32 = 0;
- depctl.b.epdis = 1;
- depctl.b.snak = 1;
- }
- else {
- depctl.d32 = 0;
- }
-
- dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-
-
- dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
- dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
- dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
- }
-
- for (i=0; i <= dev_if->num_out_eps; i++)
- {
- depctl_data_t depctl;
- depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
- if (depctl.b.epena) {
- depctl.d32 = 0;
- depctl.b.epdis = 1;
- depctl.b.snak = 1;
- }
- else {
- depctl.d32 = 0;
- }
-
- dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-
- dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
- dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
- dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
- }
-
- if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
- dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
- dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
- dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
-
- dev_if->rx_thr_length = params->rx_thr_length;
- dev_if->tx_thr_length = params->tx_thr_length;
-
- dev_if->setup_desc_index = 0;
-
- dthrctl.d32 = 0;
- dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
- dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
- dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
- dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
- dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
-
- dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
-
- DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
- dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
-
- }
-
- dwc_otg_enable_device_interrupts(core_if);
-
- {
- diepmsk_data_t msk = { .d32 = 0 };
- msk.b.txfifoundrn = 1;
- if(core_if->multiproc_int_enable) {
- dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
- } else {
- dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
- }
- }
-
-
- if(core_if->multiproc_int_enable) {
- /* Set NAK on Babble */
- dctl_data_t dctl = { .d32 = 0};
- dctl.b.nakonbble = 1;
- dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
- }
-}
-
-/**
- * This function enables the Host mode interrupts.
- *
- * @param core_if Programming view of DWC_otg controller
- */
-void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
- gintmsk_data_t intr_mask = { .d32 = 0 };
-
- DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
- /* Disable all interrupts. */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* Clear any pending interrupts. */
- dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-
- /* Enable the common interrupts */
- dwc_otg_enable_common_interrupts(core_if);
-
- /*
- * Enable host mode interrupts without disturbing common
- * interrupts.
- */
- intr_mask.b.sofintr = 1;
- intr_mask.b.portintr = 1;
- intr_mask.b.hcintr = 1;
-
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-}
-
-/**
- * This function disables the Host Mode interrupts.
- *
- * @param core_if Programming view of DWC_otg controller
- */
-void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
- gintmsk_data_t intr_mask = { .d32 = 0 };
-
- DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-
- /*
- * Disable host mode interrupts without disturbing common
- * interrupts.
- */
- intr_mask.b.sofintr = 1;
- intr_mask.b.portintr = 1;
- intr_mask.b.hcintr = 1;
- intr_mask.b.ptxfempty = 1;
- intr_mask.b.nptxfempty = 1;
-
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-}
-
-/**
- * This function initializes the DWC_otg controller registers for
- * host mode.
- *
- * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
- * request queues. Host channels are reset to ensure that they are ready for
- * performing transfers.
- *
- * @param core_if Programming view of DWC_otg controller
- *
- */
-void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
- dwc_otg_host_if_t *host_if = core_if->host_if;
- dwc_otg_core_params_t *params = core_if->core_params;
- hprt0_data_t hprt0 = { .d32 = 0 };
- fifosize_data_t nptxfifosize;
- fifosize_data_t ptxfifosize;
- int i;
- hcchar_data_t hcchar;
- hcfg_data_t hcfg;
- dwc_otg_hc_regs_t *hc_regs;
- int num_channels;
- gotgctl_data_t gotgctl = { .d32 = 0 };
-
- DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
-
- /* Restart the Phy Clock */
- dwc_write_reg32(core_if->pcgcctl, 0);
-
- /* Initialize Host Configuration Register */
- init_fslspclksel(core_if);
- if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
- {
- hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
- hcfg.b.fslssupp = 1;
- dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
- }
-
- /* Configure data FIFO sizes */
- if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
- DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
-
- /* Rx FIFO */
- DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
- dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-
- /* Non-periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
- nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
- nptxfifosize.b.startaddr = params->host_rx_fifo_size;
- dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
- DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-
- /* Periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
- ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
- ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
- dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
- DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
- }
-
- /* Clear Host Set HNP Enable in the OTG Control Register */
- gotgctl.b.hstsethnpen = 1;
- dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
-
- /* Make sure the FIFOs are flushed. */
- dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
- dwc_otg_flush_rx_fifo(core_if);
-
- /* Flush out any leftover queued requests. */
- num_channels = core_if->core_params->host_channels;
- for (i = 0; i < num_channels; i++)
- {
- hc_regs = core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 0;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- }
-
- /* Halt all channels to put them into a known state. */
- for (i = 0; i < num_channels; i++)
- {
- int count = 0;
- hc_regs = core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
- do {
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (++count > 1000)
- {
- DWC_ERROR("%s: Unable to clear halt on channel %d\n",
- __func__, i);
- break;
- }
- }
- while (hcchar.b.chen);
- }
-
- /* Turn on the vbus power. */
- DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
- if (core_if->op_state == A_HOST) {
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
- if (hprt0.b.prtpwr == 0) {
- hprt0.b.prtpwr = 1;
- dwc_write_reg32(host_if->hprt0, hprt0.d32);
- }
- }
-
- dwc_otg_enable_host_interrupts(core_if);
-}
-
-/**
- * Prepares a host channel for transferring packets to/from a specific
- * endpoint. The HCCHARn register is set up with the characteristics specified
- * in _hc. Host channel interrupts that may need to be serviced while this
- * transfer is in progress are enabled.
- *
- * @param core_if Programming view of DWC_otg controller
- * @param hc Information needed to initialize the host channel
- */
-void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
- uint32_t intr_enable;
- hcintmsk_data_t hc_intr_mask;
- gintmsk_data_t gintmsk = { .d32 = 0 };
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
-
- uint8_t hc_num = hc->hc_num;
- dwc_otg_host_if_t *host_if = core_if->host_if;
- dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
-
- /* Clear old interrupt conditions for this host channel. */
- hc_intr_mask.d32 = 0xFFFFFFFF;
- hc_intr_mask.b.reserved = 0;
- dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
-
- /* Enable channel interrupts required for this transfer. */
- hc_intr_mask.d32 = 0;
- hc_intr_mask.b.chhltd = 1;
- if (core_if->dma_enable) {
- hc_intr_mask.b.ahberr = 1;
- if (hc->error_state && !hc->do_split &&
- hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
- hc_intr_mask.b.ack = 1;
- if (hc->ep_is_in) {
- hc_intr_mask.b.datatglerr = 1;
- if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
- hc_intr_mask.b.nak = 1;
- }
- }
- }
- }
- else {
- switch (hc->ep_type) {
- case DWC_OTG_EP_TYPE_CONTROL:
- case DWC_OTG_EP_TYPE_BULK:
- hc_intr_mask.b.xfercompl = 1;
- hc_intr_mask.b.stall = 1;
- hc_intr_mask.b.xacterr = 1;
- hc_intr_mask.b.datatglerr = 1;
- if (hc->ep_is_in) {
- hc_intr_mask.b.bblerr = 1;
- }
- else {
- hc_intr_mask.b.nak = 1;
- hc_intr_mask.b.nyet = 1;
- if (hc->do_ping) {
- hc_intr_mask.b.ack = 1;
- }
- }
-
- if (hc->do_split) {
- hc_intr_mask.b.nak = 1;
- if (hc->complete_split) {
- hc_intr_mask.b.nyet = 1;
- }
- else {
- hc_intr_mask.b.ack = 1;
- }
- }
-
- if (hc->error_state) {
- hc_intr_mask.b.ack = 1;
- }
- break;
- case DWC_OTG_EP_TYPE_INTR:
- hc_intr_mask.b.xfercompl = 1;
- hc_intr_mask.b.nak = 1;
- hc_intr_mask.b.stall = 1;
- hc_intr_mask.b.xacterr = 1;
- hc_intr_mask.b.datatglerr = 1;
- hc_intr_mask.b.frmovrun = 1;
-
- if (hc->ep_is_in) {
- hc_intr_mask.b.bblerr = 1;
- }
- if (hc->error_state) {
- hc_intr_mask.b.ack = 1;
- }
- if (hc->do_split) {
- if (hc->complete_split) {
- hc_intr_mask.b.nyet = 1;
- }
- else {
- hc_intr_mask.b.ack = 1;
- }
- }
- break;
- case DWC_OTG_EP_TYPE_ISOC:
- hc_intr_mask.b.xfercompl = 1;
- hc_intr_mask.b.frmovrun = 1;
- hc_intr_mask.b.ack = 1;
-
- if (hc->ep_is_in) {
- hc_intr_mask.b.xacterr = 1;
- hc_intr_mask.b.bblerr = 1;
- }
- break;
- }
- }
- dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
-
-// if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
-// hc->max_packet = 512;
- /* Enable the top level host channel interrupt. */
- intr_enable = (1 << hc_num);
- dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
-
- /* Make sure host channel interrupts are enabled. */
- gintmsk.b.hcintr = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-
- /*
- * Program the HCCHARn register with the endpoint characteristics for
- * the current transfer.
- */
- hcchar.d32 = 0;
- hcchar.b.devaddr = hc->dev_addr;
- hcchar.b.epnum = hc->ep_num;
- hcchar.b.epdir = hc->ep_is_in;
- hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
- hcchar.b.eptype = hc->ep_type;
- hcchar.b.mps = hc->max_packet;
-
- dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
- DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
- DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
- DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
- DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
- DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
- DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
-
- /*
- * Program the HCSPLIT register for SPLITs
- */
- hcsplt.d32 = 0;
- if (hc->do_split) {
- DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
- hc->complete_split ? "CSPLIT" : "SSPLIT");
- hcsplt.b.compsplt = hc->complete_split;
- hcsplt.b.xactpos = hc->xact_pos;
- hcsplt.b.hubaddr = hc->hub_addr;
- hcsplt.b.prtaddr = hc->port_addr;
- DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split);
- DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos);
- DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr);
- DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr);
- DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in);
- DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
- DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len);
- }
- dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
-
-}
-
-/**
- * Attempts to halt a host channel. This function should only be called in
- * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
- * normal circumstances in DMA mode, the controller halts the channel when the
- * transfer is complete or a condition occurs that requires application
- * intervention.
- *
- * In slave mode, checks for a free request queue entry, then sets the Channel
- * Enable and Channel Disable bits of the Host Channel Characteristics
- * register of the specified channel to intiate the halt. If there is no free
- * request queue entry, sets only the Channel Disable bit of the HCCHARn
- * register to flush requests for this channel. In the latter case, sets a
- * flag to indicate that the host channel needs to be halted when a request
- * queue slot is open.
- *
- * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- * HCCHARn register. The controller ensures there is space in the request
- * queue before submitting the halt request.
- *
- * Some time may elapse before the core flushes any posted requests for this
- * host channel and halts. The Channel Halted interrupt handler completes the
- * deactivation of the host channel.
- *
- * @param core_if Controller register interface.
- * @param hc Host channel to halt.
- * @param halt_status Reason for halting the channel.
- */
-void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
- dwc_hc_t *hc,
- dwc_otg_halt_status_e halt_status)
-{
- gnptxsts_data_t nptxsts;
- hptxsts_data_t hptxsts;
- hcchar_data_t hcchar;
- dwc_otg_hc_regs_t *hc_regs;
- dwc_otg_core_global_regs_t *global_regs;
- dwc_otg_host_global_regs_t *host_global_regs;
-
- hc_regs = core_if->host_if->hc_regs[hc->hc_num];
- global_regs = core_if->core_global_regs;
- host_global_regs = core_if->host_if->host_global_regs;
-
- WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
-
- if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
- halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
- /*
- * Disable all channel interrupts except Ch Halted. The QTD
- * and QH state associated with this transfer has been cleared
- * (in the case of URB_DEQUEUE), so the channel needs to be
- * shut down carefully to prevent crashes.
- */
- hcintmsk_data_t hcintmsk;
- hcintmsk.d32 = 0;
- hcintmsk.b.chhltd = 1;
- dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
-
- /*
- * Make sure no other interrupts besides halt are currently
- * pending. Handling another interrupt could cause a crash due
- * to the QTD and QH state.
- */
- dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
-
- /*
- * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
- * even if the channel was already halted for some other
- * reason.
- */
- hc->halt_status = halt_status;
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen == 0) {
- /*
- * The channel is either already halted or it hasn't
- * started yet. In DMA mode, the transfer may halt if
- * it finishes normally or a condition occurs that
- * requires driver intervention. Don't want to halt
- * the channel again. In either Slave or DMA mode,
- * it's possible that the transfer has been assigned
- * to a channel, but not started yet when an URB is
- * dequeued. Don't want to halt a channel that hasn't
- * started yet.
- */
- return;
- }
- }
-
- if (hc->halt_pending) {
- /*
- * A halt has already been issued for this channel. This might
- * happen when a transfer is aborted by a higher level in
- * the stack.
- */
-#ifdef DEBUG
- DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
- __func__, hc->hc_num);
-
-/* dwc_otg_dump_global_registers(core_if); */
-/* dwc_otg_dump_host_registers(core_if); */
-#endif
- return;
- }
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 1;
-
- if (!core_if->dma_enable) {
- /* Check for space in the request queue to issue the halt. */
- if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
- hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
- nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- if (nptxsts.b.nptxqspcavail == 0) {
- hcchar.b.chen = 0;
- }
- }
- else {
- hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
- if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
- hcchar.b.chen = 0;
- }
- }
- }
-
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- hc->halt_status = halt_status;
-
- if (hcchar.b.chen) {
- hc->halt_pending = 1;
- hc->halt_on_queue = 0;
- }
- else {
- hc->halt_on_queue = 1;
- }
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
- DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending);
- DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue);
- DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status);
-
- return;
-}
-
-/**
- * Clears the transfer state for a host channel. This function is normally
- * called after a transfer is done and the host channel is being released.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param hc Identifies the host channel to clean up.
- */
-void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
- dwc_otg_hc_regs_t *hc_regs;
-
- hc->xfer_started = 0;
-
- /*
- * Clear channel interrupt enables and any unhandled channel interrupt
- * conditions.
- */
- hc_regs = core_if->host_if->hc_regs[hc->hc_num];
- dwc_write_reg32(&hc_regs->hcintmsk, 0);
- dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
-
-#ifdef DEBUG
- del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
- {
- hcchar_data_t hcchar;
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chdis) {
- DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, hc->hc_num, hcchar.d32);
- }
- }
-#endif
-}
-
-/**
- * Sets the channel property that indicates in which frame a periodic transfer
- * should occur. This is always set to the _next_ frame. This function has no
- * effect on non-periodic transfers.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param hc Identifies the host channel to set up and its properties.
- * @param hcchar Current value of the HCCHAR register for the specified host
- * channel.
- */
-static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
- dwc_hc_t *hc,
- hcchar_data_t *hcchar)
-{
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- hfnum_data_t hfnum;
- hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
-
- /* 1 if _next_ frame is odd, 0 if it's even */
- hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-#ifdef DEBUG
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
- switch (hfnum.b.frnum & 0x7) {
- case 7:
- core_if->hfnum_7_samples++;
- core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
- break;
- case 0:
- core_if->hfnum_0_samples++;
- core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
- break;
- default:
- core_if->hfnum_other_samples++;
- core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
- break;
- }
- }
-#endif
- }
-}
-
-#ifdef DEBUG
-static void hc_xfer_timeout(unsigned long ptr)
-{
- hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
- int hc_num = xfer_info->hc->hc_num;
- DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
- DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
-}
-#endif
-
-/*
- * This function does the setup for a data transfer for a host channel and
- * starts the transfer. May be called in either Slave mode or DMA mode. In
- * Slave mode, the caller must ensure that there is sufficient space in the
- * request queue and Tx Data FIFO.
- *
- * For an OUT transfer in Slave mode, it loads a data packet into the
- * appropriate FIFO. If necessary, additional data packets will be loaded in
- * the Host ISR.
- *
- * For an IN transfer in Slave mode, a data packet is requested. The data
- * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
- * additional data packets are requested in the Host ISR.
- *
- * For a PING transfer in Slave mode, the Do Ping bit is set in the egards,
- *
- * Steven
- *
- * register along with a packet count of 1 and the channel is enabled. This
- * causes a single PING transaction to occur. Other fields in HCTSIZ are
- * simply set to 0 since no data transfer occurs in this case.
- *
- * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- * all the information required to perform the subsequent data transfer. In
- * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- * controller performs the entire PING protocol, then starts the data
- * transfer.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param hc Information needed to initialize the host channel. The xfer_len
- * value may be reduced to accommodate the max widths of the XferSize and
- * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
- * to reflect the final xfer_len value.
- */
-void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- uint16_t num_packets;
- uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
- uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
- dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-
- hctsiz.d32 = 0;
-
- if (hc->do_ping) {
- if (!core_if->dma_enable) {
- dwc_otg_hc_do_ping(core_if, hc);
- hc->xfer_started = 1;
- return;
- }
- else {
- hctsiz.b.dopng = 1;
- }
- }
-
- if (hc->do_split) {
- num_packets = 1;
-
- if (hc->complete_split && !hc->ep_is_in) {
- /* For CSPLIT OUT Transfer, set the size to 0 so the
- * core doesn't expect any data written to the FIFO */
- hc->xfer_len = 0;
- }
- else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
- hc->xfer_len = hc->max_packet;
- }
- else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
- hc->xfer_len = 188;
- }
-
- hctsiz.b.xfersize = hc->xfer_len;
- }
- else {
- /*
- * Ensure that the transfer length and packet count will fit
- * in the widths allocated for them in the HCTSIZn register.
- */
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * Make sure the transfer size is no larger than one
- * (micro)frame's worth of data. (A check was done
- * when the periodic transfer was accepted to ensure
- * that a (micro)frame's worth of data can be
- * programmed into a channel.)
- */
- uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
- if (hc->xfer_len > max_periodic_len) {
- hc->xfer_len = max_periodic_len;
- }
- else {
- }
-
- }
- else if (hc->xfer_len > max_hc_xfer_size) {
- /* Make sure that xfer_len is a multiple of max packet size. */
- hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
- }
-
- if (hc->xfer_len > 0) {
- num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
- if (num_packets > max_hc_pkt_count) {
- num_packets = max_hc_pkt_count;
- hc->xfer_len = num_packets * hc->max_packet;
- }
- }
- else {
- /* Need 1 packet for transfer length of 0. */
- num_packets = 1;
- }
-
- if (hc->ep_is_in) {
- /* Always program an integral # of max packets for IN transfers. */
- hc->xfer_len = num_packets * hc->max_packet;
- }
-
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * Make sure that the multi_count field matches the
- * actual transfer length.
- */
- hc->multi_count = num_packets;
- }
-
- if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /* Set up the initial PID for the transfer. */
- if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
- if (hc->ep_is_in) {
- if (hc->multi_count == 1) {
- hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
- }
- else if (hc->multi_count == 2) {
- hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
- }
- else {
- hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
- }
- }
- else {
- if (hc->multi_count == 1) {
- hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
- }
- else {
- hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
- }
- }
- }
- else {
- hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
- }
- }
-
- hctsiz.b.xfersize = hc->xfer_len;
- }
-
- hc->start_pkt_count = num_packets;
- hctsiz.b.pktcnt = num_packets;
- hctsiz.b.pid = hc->data_pid_start;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
- DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
- DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-
- if (core_if->dma_enable) {
-#if defined (CONFIG_DWC_OTG_HOST_ONLY)
- if ((uint32_t)hc->xfer_buff & 0x3) {
- /* non DWORD-aligned buffer case*/
- if(!hc->qh->dw_align_buf) {
- hc->qh->dw_align_buf =
- dma_alloc_coherent(NULL,
- core_if->core_params->max_transfer_size,
- &hc->qh->dw_align_buf_dma,
- GFP_ATOMIC | GFP_DMA);
- if (!hc->qh->dw_align_buf) {
-
- DWC_ERROR("%s: Failed to allocate memory to handle "
- "non-dword aligned buffer case\n", __func__);
- return;
- }
-
- }
- if (!hc->ep_is_in) {
- memcpy(hc->qh->dw_align_buf, phys_to_virt((uint32_t)hc->xfer_buff), hc->xfer_len);
- }
-
- dwc_write_reg32(&hc_regs->hcdma, hc->qh->dw_align_buf_dma);
- }
- else
-#endif
- dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
- }
-
- /* Start the split */
- if (hc->do_split) {
- hcsplt_data_t hcsplt;
- hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
- hcsplt.b.spltena = 1;
- dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
- }
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.multicnt = hc->multi_count;
- hc_set_even_odd_frame(core_if, hc, &hcchar);
-#ifdef DEBUG
- core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
- if (hcchar.b.chdis) {
- DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, hc->hc_num, hcchar.d32);
- }
-#endif
-
- /* Set host channel enable after all other setup is complete. */
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- hc->xfer_started = 1;
- hc->requests++;
-
- if (!core_if->dma_enable &&
- !hc->ep_is_in && hc->xfer_len > 0) {
- /* Load OUT packet into the appropriate Tx FIFO. */
- dwc_otg_hc_write_packet(core_if, hc);
- }
-
-#ifdef DEBUG
- /* Start a timer for this transfer. */
- core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
- core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
- core_if->hc_xfer_info[hc->hc_num].hc = hc;
- core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
- core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
- add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
-#endif
-}
-
-/**
- * This function continues a data transfer that was started by previous call
- * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
- * sufficient space in the request queue and Tx Data FIFO. This function
- * should only be called in Slave mode. In DMA mode, the controller acts
- * autonomously to complete transfers programmed to a host channel.
- *
- * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
- * if there is any data remaining to be queued. For an IN transfer, another
- * data packet is always requested. For the SETUP phase of a control transfer,
- * this function does nothing.
- *
- * @return 1 if a new request is queued, 0 if no more requests are required
- * for this transfer.
- */
-int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-
- if (hc->do_split) {
- /* SPLITs always queue just once per channel */
- return 0;
- }
- else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
- /* SETUPs are queued only once since they can't be NAKed. */
- return 0;
- }
- else if (hc->ep_is_in) {
- /*
- * Always queue another request for other IN transfers. If
- * back-to-back INs are issued and NAKs are received for both,
- * the driver may still be processing the first NAK when the
- * second NAK is received. When the interrupt handler clears
- * the NAK interrupt for the first NAK, the second NAK will
- * not be seen. So we can't depend on the NAK interrupt
- * handler to requeue a NAKed request. Instead, IN requests
- * are issued each time this function is called. When the
- * transfer completes, the extra requests for the channel will
- * be flushed.
- */
- hcchar_data_t hcchar;
- dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hc_set_even_odd_frame(core_if, hc, &hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- hc->requests++;
- return 1;
- }
- else {
- /* OUT transfers. */
- if (hc->xfer_count < hc->xfer_len) {
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- hcchar_data_t hcchar;
- dwc_otg_hc_regs_t *hc_regs;
- hc_regs = core_if->host_if->hc_regs[hc->hc_num];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hc_set_even_odd_frame(core_if, hc, &hcchar);
- }
-
- /* Load OUT packet into the appropriate Tx FIFO. */
- dwc_otg_hc_write_packet(core_if, hc);
- hc->requests++;
- return 1;
- }
- else {
- return 0;
- }
- }
-}
-
-/**
- * Starts a PING transfer. This function should only be called in Slave mode.
- * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
- */
-void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-
- hctsiz.d32 = 0;
- hctsiz.b.dopng = 1;
- hctsiz.b.pktcnt = 1;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-}
-
-/*
- * This function writes a packet into the Tx FIFO associated with the Host
- * Channel. For a channel associated with a non-periodic EP, the non-periodic
- * Tx FIFO is written. For a channel associated with a periodic EP, the
- * periodic Tx FIFO is written. This function should only be called in Slave
- * mode.
- *
- * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
- * then number of bytes written to the Tx FIFO.
- */
-void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-{
- uint32_t i;
- uint32_t remaining_count;
- uint32_t byte_count;
- uint32_t dword_count;
-
- uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
- uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
-
- remaining_count = hc->xfer_len - hc->xfer_count;
- if (remaining_count > hc->max_packet) {
- byte_count = hc->max_packet;
- }
- else {
- byte_count = remaining_count;
- }
-
- dword_count = (byte_count + 3) / 4;
-
- if ((((unsigned long)data_buff) & 0x3) == 0) {
- /* xfer_buff is DWORD aligned. */
- for (i = 0; i < dword_count; i++, data_buff++)
- {
- dwc_write_reg32(data_fifo, *data_buff);
- }
- }
- else {
- /* xfer_buff is not DWORD aligned. */
- for (i = 0; i < dword_count; i++, data_buff++)
- {
- dwc_write_reg32(data_fifo, get_unaligned(data_buff));
- }
- }
-
- hc->xfer_count += byte_count;
- hc->xfer_buff += byte_count;
-}
-
-/**
- * Gets the current USB frame number. This is the frame number from the last
- * SOF packet.
- */
-uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
-{
- dsts_data_t dsts;
- dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
- /* read current frame/microframe number from DSTS register */
- return dsts.b.soffn;
-}
-
-/**
- * This function reads a setup packet from the Rx FIFO into the destination
- * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
- * Interrupt routine when a SETUP packet has been received in Slave mode.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dest Destination buffer for packet data.
- */
-void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
-{
- /* Get the 8 bytes of a setup transaction data */
-
- /* Pop 2 DWORDS off the receive data FIFO into memory */
- dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
- dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
-}
-
-
-/**
- * This function enables EP0 OUT to receive SETUP packets and configures EP0
- * IN for transmitting packets. It is normally called when the
- * "Enumeration Done" interrupt occurs.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP0 data.
- */
-void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- dsts_data_t dsts;
- depctl_data_t diepctl;
- depctl_data_t doepctl;
- dctl_data_t dctl = { .d32 = 0 };
-
- /* Read the Device Status and Endpoint 0 Control registers */
- dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
- diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
- doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
-
- /* Set the MPS of the IN EP based on the enumeration speed */
- switch (dsts.b.enumspd) {
- case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
- case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
- case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
- diepctl.b.mps = DWC_DEP0CTL_MPS_64;
- break;
- case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
- diepctl.b.mps = DWC_DEP0CTL_MPS_8;
- break;
- }
-
- dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-
- /* Enable OUT EP for receive */
- doepctl.b.epena = 1;
- dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
- dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
- DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
- dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-#endif
- dctl.b.cgnpinnak = 1;
-
- dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
- DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
- dwc_read_reg32(&dev_if->dev_global_regs->dctl));
-}
-
-/**
- * This function activates an EP. The Device EP control register for
- * the EP is configured as defined in the ep structure. Note: This
- * function is not used for EP0.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to activate.
- */
-void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- depctl_data_t depctl;
- volatile uint32_t *addr;
- daint_data_t daintmsk = { .d32 = 0 };
-
- DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
- (ep->is_in?"IN":"OUT"));
-
- /* Read DEPCTLn register */
- if (ep->is_in == 1) {
- addr = &dev_if->in_ep_regs[ep->num]->diepctl;
- daintmsk.ep.in = 1<<ep->num;
- }
- else {
- addr = &dev_if->out_ep_regs[ep->num]->doepctl;
- daintmsk.ep.out = 1<<ep->num;
- }
-
- /* If the EP is already active don't change the EP Control
- * register. */
- depctl.d32 = dwc_read_reg32(addr);
- if (!depctl.b.usbactep) {
- depctl.b.mps = ep->maxpacket;
- depctl.b.eptype = ep->type;
- depctl.b.txfnum = ep->tx_fifo_num;
-
- if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
- depctl.b.setd0pid = 1; // ???
- }
- else {
- depctl.b.setd0pid = 1;
- }
- depctl.b.usbactep = 1;
-
- dwc_write_reg32(addr, depctl.d32);
- DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
- }
-
- /* Enable the Interrupt for this EP */
- if(core_if->multiproc_int_enable) {
- if (ep->is_in == 1) {
- diepmsk_data_t diepmsk = { .d32 = 0};
- diepmsk.b.xfercompl = 1;
- diepmsk.b.timeout = 1;
- diepmsk.b.epdisabled = 1;
- diepmsk.b.ahberr = 1;
- diepmsk.b.intknepmis = 1;
- diepmsk.b.txfifoundrn = 1; //?????
-
-
- if(core_if->dma_desc_enable) {
- diepmsk.b.bna = 1;
- }
-/*
- if(core_if->dma_enable) {
- doepmsk.b.nak = 1;
- }
-*/
- dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
-
- } else {
- doepmsk_data_t doepmsk = { .d32 = 0};
- doepmsk.b.xfercompl = 1;
- doepmsk.b.ahberr = 1;
- doepmsk.b.epdisabled = 1;
-
-
- if(core_if->dma_desc_enable) {
- doepmsk.b.bna = 1;
- }
-/*
- doepmsk.b.babble = 1;
- doepmsk.b.nyet = 1;
- doepmsk.b.nak = 1;
-*/
- dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
- }
- dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
- 0, daintmsk.d32);
- } else {
- dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
- 0, daintmsk.d32);
- }
-
- DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
- dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
-
- ep->stall_clear_flag = 0;
- return;
-}
-
-/**
- * This function deactivates an EP. This is done by clearing the USB Active
- * EP bit in the Device EP control register. Note: This function is not used
- * for EP0. EP0 cannot be deactivated.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to deactivate.
- */
-void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl = { .d32 = 0 };
- volatile uint32_t *addr;
- daint_data_t daintmsk = { .d32 = 0};
-
- /* Read DEPCTLn register */
- if (ep->is_in == 1) {
- addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
- daintmsk.ep.in = 1<<ep->num;
- }
- else {
- addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
- daintmsk.ep.out = 1<<ep->num;
- }
-
- depctl.b.usbactep = 0;
-
- if(core_if->dma_desc_enable)
- depctl.b.epdis = 1;
-
- dwc_write_reg32(addr, depctl.d32);
-
- /* Disable the Interrupt for this EP */
- if(core_if->multiproc_int_enable) {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
- daintmsk.d32, 0);
-
- if (ep->is_in == 1) {
- dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
- } else {
- dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
- }
- } else {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
- daintmsk.d32, 0);
- }
-}
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer. For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- dwc_otg_dma_desc_t* dma_desc;
- uint32_t offset;
- uint32_t xfer_est;
- int i;
-
- ep->desc_cnt = ( ep->total_len / ep->maxxfer) +
- ((ep->total_len % ep->maxxfer) ? 1 : 0);
- if(!ep->desc_cnt)
- ep->desc_cnt = 1;
-
- dma_desc = ep->desc_addr;
- xfer_est = ep->total_len;
- offset = 0;
- for( i = 0; i < ep->desc_cnt; ++i) {
- /** DMA Descriptor Setup */
- if(xfer_est > ep->maxxfer) {
- dma_desc->status.b.bs = BS_HOST_BUSY;
- dma_desc->status.b.l = 0;
- dma_desc->status.b.ioc = 0;
- dma_desc->status.b.sp = 0;
- dma_desc->status.b.bytes = ep->maxxfer;
- dma_desc->buf = ep->dma_addr + offset;
- dma_desc->status.b.bs = BS_HOST_READY;
-
- xfer_est -= ep->maxxfer;
- offset += ep->maxxfer;
- } else {
- dma_desc->status.b.bs = BS_HOST_BUSY;
- dma_desc->status.b.l = 1;
- dma_desc->status.b.ioc = 1;
- if(ep->is_in) {
- dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
- 1 : ((ep->sent_zlp) ? 1 : 0);
- dma_desc->status.b.bytes = xfer_est;
- } else {
- dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
- }
-
- dma_desc->buf = ep->dma_addr + offset;
- dma_desc->status.b.bs = BS_HOST_READY;
- }
- dma_desc ++;
- }
-}
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer. For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-
-void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl;
- deptsiz_data_t deptsiz;
- gintmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-
- DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
- "xfer_buff=%p start_xfer_buff=%p\n",
- ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
- ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
-
- /* IN endpoint */
- if (ep->is_in == 1) {
- dwc_otg_dev_in_ep_regs_t *in_regs =
- core_if->dev_if->in_ep_regs[ep->num];
-
- gnptxsts_data_t gtxstatus;
-
- gtxstatus.d32 =
- dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-
- if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-#ifdef DEBUG
- DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
-#endif
- return;
- }
-
- depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
- deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-
- ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
- ep->maxxfer : (ep->total_len - ep->xfer_len);
-
- /* Zero Length Packet? */
- if ((ep->xfer_len - ep->xfer_count) == 0) {
- deptsiz.b.xfersize = 0;
- deptsiz.b.pktcnt = 1;
- }
- else {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
- deptsiz.b.pktcnt =
- (ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
- ep->maxpacket;
- }
-
-
- /* Write the DMA register */
- if (core_if->dma_enable) {
- if (core_if->dma_desc_enable == 0) {
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- dwc_write_reg32 (&(in_regs->diepdma),
- (uint32_t)ep->dma_addr);
- }
- else {
- init_dma_desc_chain(core_if, ep);
- /** DIEPDMAn Register write */
- dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
- }
- }
- else {
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt,
- * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
- * the data will be written into the fifo by the ISR.
- */
- if(core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
- intr_mask.d32, intr_mask.d32);
- }
- else {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if(ep->xfer_len > 0) {
- uint32_t fifoemptymsk = 0;
- fifoemptymsk = 1 << ep->num;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
- 0, fifoemptymsk);
-
- }
- }
- }
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
- depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
- depctl.b.nextep = ep->num;
- dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-
- }
- else {
- /* OUT endpoint */
- dwc_otg_dev_out_ep_regs_t *out_regs =
- core_if->dev_if->out_ep_regs[ep->num];
-
- depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
- deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-
- ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
- ep->maxxfer : (ep->total_len - ep->xfer_len);
-
- /* Program the transfer size and packet count as follows:
- *
- * pktcnt = N
- * xfersize = N * maxpacket
- */
- if ((ep->xfer_len - ep->xfer_count) == 0) {
- /* Zero Length Packet */
- deptsiz.b.xfersize = ep->maxpacket;
- deptsiz.b.pktcnt = 1;
- }
- else {
- deptsiz.b.pktcnt =
- (ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
- ep->maxpacket;
- ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
- deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
- }
-
- DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
- ep->num,
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
-
- if (core_if->dma_enable) {
- if (!core_if->dma_desc_enable) {
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-
- dwc_write_reg32 (&(out_regs->doepdma),
- (uint32_t)ep->dma_addr);
- }
- else {
- init_dma_desc_chain(core_if, ep);
-
- /** DOEPDMAn Register write */
- dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
- }
- }
- else {
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
- }
-
- /* EP enable */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
-
- dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-
- DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
- dwc_read_reg32(&out_regs->doepctl),
- dwc_read_reg32(&out_regs->doeptsiz));
- DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
- dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
- dwc_read_reg32(&core_if->core_global_regs->gintmsk));
- }
-}
-
-/**
- * This function setup a zero length transfer in Buffer DMA and
- * Slave modes for usb requests with zero field set
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
-
- depctl_data_t depctl;
- deptsiz_data_t deptsiz;
- gintmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-
- /* IN endpoint */
- if (ep->is_in == 1) {
- dwc_otg_dev_in_ep_regs_t *in_regs =
- core_if->dev_if->in_ep_regs[ep->num];
-
- depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
- deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-
- deptsiz.b.xfersize = 0;
- deptsiz.b.pktcnt = 1;
-
-
- /* Write the DMA register */
- if (core_if->dma_enable) {
- if (core_if->dma_desc_enable == 0) {
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- dwc_write_reg32 (&(in_regs->diepdma),
- (uint32_t)ep->dma_addr);
- }
- }
- else {
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt,
- * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
- * the data will be written into the fifo by the ISR.
- */
- if(core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
- intr_mask.d32, intr_mask.d32);
- }
- else {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if(ep->xfer_len > 0) {
- uint32_t fifoemptymsk = 0;
- fifoemptymsk = 1 << ep->num;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
- 0, fifoemptymsk);
- }
- }
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
- depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
- depctl.b.nextep = ep->num;
- dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-
- }
- else {
- /* OUT endpoint */
- dwc_otg_dev_out_ep_regs_t *out_regs =
- core_if->dev_if->out_ep_regs[ep->num];
-
- depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
- deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-
- /* Zero Length Packet */
- deptsiz.b.xfersize = ep->maxpacket;
- deptsiz.b.pktcnt = 1;
-
- if (core_if->dma_enable) {
- if (!core_if->dma_desc_enable) {
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-
- dwc_write_reg32 (&(out_regs->doepdma),
- (uint32_t)ep->dma_addr);
- }
- }
- else {
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
- }
-
- /* EP enable */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
-
- dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-
- }
-}
-
-/**
- * This function does the setup for a data transfer for EP0 and starts
- * the transfer. For an IN transfer, the packets will be loaded into
- * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
- * unloaded from the Rx FIFO in the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP0 data.
- */
-void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl;
- deptsiz0_data_t deptsiz;
- gintmsk_data_t intr_mask = { .d32 = 0};
- dwc_otg_dma_desc_t* dma_desc;
-
- DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
- "xfer_buff=%p start_xfer_buff=%p \n",
- ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
- ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
-
- ep->total_len = ep->xfer_len;
-
- /* IN endpoint */
- if (ep->is_in == 1) {
- dwc_otg_dev_in_ep_regs_t *in_regs =
- core_if->dev_if->in_ep_regs[0];
-
- gnptxsts_data_t gtxstatus;
-
- gtxstatus.d32 =
- dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-
- if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-#ifdef DEBUG
- deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
- DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
- dwc_read_reg32(&in_regs->diepctl));
- DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
- deptsiz.d32,
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
- DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
- gtxstatus.d32);
-#endif
- return;
- }
-
-
- depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
- deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-
- /* Zero Length Packet? */
- if (ep->xfer_len == 0) {
- deptsiz.b.xfersize = 0;
- deptsiz.b.pktcnt = 1;
- }
- else {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- if (ep->xfer_len > ep->maxpacket) {
- ep->xfer_len = ep->maxpacket;
- deptsiz.b.xfersize = ep->maxpacket;
- }
- else {
- deptsiz.b.xfersize = ep->xfer_len;
- }
- deptsiz.b.pktcnt = 1;
-
- }
- DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
- ep->xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-
- /* Write the DMA register */
- if (core_if->dma_enable) {
- if(core_if->dma_desc_enable == 0) {
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-
- dwc_write_reg32 (&(in_regs->diepdma),
- (uint32_t)ep->dma_addr);
- }
- else {
- dma_desc = core_if->dev_if->in_desc_addr;
-
- /** DMA Descriptor Setup */
- dma_desc->status.b.bs = BS_HOST_BUSY;
- dma_desc->status.b.l = 1;
- dma_desc->status.b.ioc = 1;
- dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
- dma_desc->status.b.bytes = ep->xfer_len;
- dma_desc->buf = ep->dma_addr;
- dma_desc->status.b.bs = BS_HOST_READY;
-
- /** DIEPDMA0 Register write */
- dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
- }
- }
- else {
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt, the
- * data will be written into the fifo by the ISR.
- */
- if (!core_if->dma_enable) {
- if(core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
- intr_mask.d32, intr_mask.d32);
- }
- else {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if(ep->xfer_len > 0) {
- uint32_t fifoemptymsk = 0;
- fifoemptymsk |= 1 << ep->num;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
- 0, fifoemptymsk);
- }
- }
- }
- }
- else {
- /* OUT endpoint */
- dwc_otg_dev_out_ep_regs_t *out_regs =
- core_if->dev_if->out_ep_regs[0];
-
- depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
- deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-
- /* Program the transfer size and packet count as follows:
- * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
- * pktcnt = N */
- /* Zero Length Packet */
- deptsiz.b.xfersize = ep->maxpacket;
- deptsiz.b.pktcnt = 1;
-
- DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
- ep->xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
-
- if (core_if->dma_enable) {
- if(!core_if->dma_desc_enable) {
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-
- dwc_write_reg32 (&(out_regs->doepdma),
- (uint32_t)ep->dma_addr);
- }
- else {
- dma_desc = core_if->dev_if->out_desc_addr;
-
- /** DMA Descriptor Setup */
- dma_desc->status.b.bs = BS_HOST_BUSY;
- dma_desc->status.b.l = 1;
- dma_desc->status.b.ioc = 1;
- dma_desc->status.b.bytes = ep->maxpacket;
- dma_desc->buf = ep->dma_addr;
- dma_desc->status.b.bs = BS_HOST_READY;
-
- /** DOEPDMA0 Register write */
- dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
- }
- }
- else {
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
- }
-
- /* EP enable */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
- }
-}
-
-/**
- * This function continues control IN transfers started by
- * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
- * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
- * bit for the packet count.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP0 data.
- */
-void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl;
- deptsiz0_data_t deptsiz;
- gintmsk_data_t intr_mask = { .d32 = 0};
- dwc_otg_dma_desc_t* dma_desc;
-
- if (ep->is_in == 1) {
- dwc_otg_dev_in_ep_regs_t *in_regs =
- core_if->dev_if->in_ep_regs[0];
- gnptxsts_data_t tx_status = { .d32 = 0 };
-
- tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
- /** @todo Should there be check for room in the Tx
- * Status Queue. If not remove the code above this comment. */
-
- depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
- deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
-
-
- if(core_if->dma_desc_enable == 0) {
- deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
- (ep->total_len - ep->xfer_count);
- deptsiz.b.pktcnt = 1;
- if(core_if->dma_enable == 0) {
- ep->xfer_len += deptsiz.b.xfersize;
- } else {
- ep->xfer_len = deptsiz.b.xfersize;
- }
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- }
- else {
- ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
- (ep->total_len - ep->xfer_count);
-
- dma_desc = core_if->dev_if->in_desc_addr;
-
- /** DMA Descriptor Setup */
- dma_desc->status.b.bs = BS_HOST_BUSY;
- dma_desc->status.b.l = 1;
- dma_desc->status.b.ioc = 1;
- dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
- dma_desc->status.b.bytes = ep->xfer_len;
- dma_desc->buf = ep->dma_addr;
- dma_desc->status.b.bs = BS_HOST_READY;
-
- /** DIEPDMA0 Register write */
- dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
- }
-
-
- DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
- ep->xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-
- /* Write the DMA register */
- if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
- if(core_if->dma_desc_enable == 0)
- dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt, the
- * data will be written into the fifo by the ISR.
- */
- if (!core_if->dma_enable) {
- if(core_if->en_multiple_tx_fifo == 0) {
- /* First clear it from GINTSTS */
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
- intr_mask.d32, intr_mask.d32);
-
- }
- else {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if(ep->xfer_len > 0) {
- uint32_t fifoemptymsk = 0;
- fifoemptymsk |= 1 << ep->num;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
- 0, fifoemptymsk);
- }
- }
- }
- }
- else {
- dwc_otg_dev_out_ep_regs_t *out_regs =
- core_if->dev_if->out_ep_regs[0];
-
-
- depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
- deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- deptsiz.b.xfersize = ep->maxpacket;
- deptsiz.b.pktcnt = 1;
-
-
- if(core_if->dma_desc_enable == 0) {
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
- }
- else {
- dma_desc = core_if->dev_if->out_desc_addr;
-
- /** DMA Descriptor Setup */
- dma_desc->status.b.bs = BS_HOST_BUSY;
- dma_desc->status.b.l = 1;
- dma_desc->status.b.ioc = 1;
- dma_desc->status.b.bytes = ep->maxpacket;
- dma_desc->buf = ep->dma_addr;
- dma_desc->status.b.bs = BS_HOST_READY;
-
- /** DOEPDMA0 Register write */
- dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
- }
-
-
- DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
- ep->xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-
- /* Write the DMA register */
- if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
- if(core_if->dma_desc_enable == 0)
- dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-
- }
-}
-
-#ifdef DEBUG
-void dump_msg(const u8 *buf, unsigned int length)
-{
- unsigned int start, num, i;
- char line[52], *p;
-
- if (length >= 512)
- return;
- start = 0;
- while (length > 0) {
- num = min(length, 16u);
- p = line;
- for (i = 0; i < num; ++i)
- {
- if (i == 8)
- *p++ = ' ';
- sprintf(p, " %02x", buf[i]);
- p += 3;
- }
- *p = 0;
- DWC_PRINT("%6x: %s\n", start, line);
- buf += num;
- start += num;
- length -= num;
- }
-}
-#else
-static inline void dump_msg(const u8 *buf, unsigned int length)
-{
-}
-#endif
-
-/**
- * This function writes a packet into the Tx FIFO associated with the
- * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
- * periodic EPs the periodic Tx FIFO associated with the EP is written
- * with all packets for the next micro-frame.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to write packet for.
- * @param dma Indicates if DMA is being used.
- */
-void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
-{
- /**
- * The buffer is padded to DWORD on a per packet basis in
- * slave/dma mode if the MPS is not DWORD aligned. The last
- * packet, if short, is also padded to a multiple of DWORD.
- *
- * ep->xfer_buff always starts DWORD aligned in memory and is a
- * multiple of DWORD in length
- *
- * ep->xfer_len can be any number of bytes
- *
- * ep->xfer_count is a multiple of ep->maxpacket until the last
- * packet
- *
- * FIFO access is DWORD */
-
- uint32_t i;
- uint32_t byte_count;
- uint32_t dword_count;
- uint32_t *fifo;
- uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
-
- DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
- if (ep->xfer_count >= ep->xfer_len) {
- DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
- return;
- }
-
- /* Find the byte length of the packet either short packet or MPS */
- if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
- byte_count = ep->xfer_len - ep->xfer_count;
- }
- else {
- byte_count = ep->maxpacket;
- }
-
- /* Find the DWORD length, padded by extra bytes as neccessary if MPS
- * is not a multiple of DWORD */
- dword_count = (byte_count + 3) / 4;
-
-#ifdef VERBOSE
- dump_msg(ep->xfer_buff, byte_count);
-#endif
-
- /**@todo NGS Where are the Periodic Tx FIFO addresses
- * intialized? What should this be? */
-
- fifo = core_if->data_fifo[ep->num];
-
-
- DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
-
- if (!dma) {
- for (i=0; i<dword_count; i++, data_buff++) {
- dwc_write_reg32(fifo, *data_buff);
- }
- }
-
- ep->xfer_count += byte_count;
- ep->xfer_buff += byte_count;
- ep->dma_addr += byte_count;
-}
-
-/**
- * Set the EP STALL.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to set the stall on.
- */
-void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl;
- volatile uint32_t *depctl_addr;
-
- DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
- (ep->is_in?"IN":"OUT"));
-
- DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
- (ep->is_in?"in":"out"));
-
- if (ep->is_in == 1) {
- depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
- depctl.d32 = dwc_read_reg32(depctl_addr);
-
- /* set the disable and stall bits */
- if (depctl.b.epena) {
- depctl.b.epdis = 1;
- }
- depctl.b.stall = 1;
- dwc_write_reg32(depctl_addr, depctl.d32);
- }
- else {
- depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
- depctl.d32 = dwc_read_reg32(depctl_addr);
-
- /* set the stall bit */
- depctl.b.stall = 1;
- dwc_write_reg32(depctl_addr, depctl.d32);
- }
-
- DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
-
- return;
-}
-
-/**
- * Clear the EP STALL.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to clear stall from.
- */
-void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl;
- volatile uint32_t *depctl_addr;
-
- DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
- (ep->is_in?"IN":"OUT"));
-
- if (ep->is_in == 1) {
- depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
- }
- else {
- depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
- }
-
- depctl.d32 = dwc_read_reg32(depctl_addr);
-
- /* clear the stall bits */
- depctl.b.stall = 0;
-
- /*
- * USB Spec 9.4.5: For endpoints using data toggle, regardless
- * of whether an endpoint has the Halt feature set, a
- * ClearFeature(ENDPOINT_HALT) request always results in the
- * data toggle being reinitialized to DATA0.
- */
- if (ep->type == DWC_OTG_EP_TYPE_INTR ||
- ep->type == DWC_OTG_EP_TYPE_BULK) {
- depctl.b.setd0pid = 1; /* DATA0 */
- }
-
- dwc_write_reg32(depctl_addr, depctl.d32);
- DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
- return;
-}
-
-/**
- * This function reads a packet from the Rx FIFO into the destination
- * buffer. To read SETUP data use dwc_otg_read_setup_packet.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dest Destination buffer for the packet.
- * @param bytes Number of bytes to copy to the destination.
- */
-void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
- uint8_t *dest,
- uint16_t bytes)
-{
- int i;
- int word_count = (bytes + 3) / 4;
-
- volatile uint32_t *fifo = core_if->data_fifo[0];
- uint32_t *data_buff = (uint32_t *)dest;
-
- /**
- * @todo Account for the case where _dest is not dword aligned. This
- * requires reading data from the FIFO into a uint32_t temp buffer,
- * then moving it into the data buffer.
- */
-
- DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
- core_if, dest, bytes);
-
- for (i=0; i<word_count; i++, data_buff++)
- {
- *data_buff = dwc_read_reg32(fifo);
- }
-
- return;
-}
-
-
-
-/**
- * This functions reads the device registers and prints them
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
-{
- int i;
- volatile uint32_t *addr;
-
- DWC_PRINT("Device Global Registers\n");
- addr=&core_if->dev_if->dev_global_regs->dcfg;
- DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->dctl;
- DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->dsts;
- DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->diepmsk;
- DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->doepmsk;
- DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->daint;
- DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->daintmsk;
- DWC_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->dtknqr1;
- DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
- addr=&core_if->dev_if->dev_global_regs->dtknqr2;
- DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
- (uint32_t)addr,dwc_read_reg32(addr));
- }
-
- addr=&core_if->dev_if->dev_global_regs->dvbusdis;
- DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
- DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
- (uint32_t)addr,dwc_read_reg32(addr));
-
- if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
- addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
- DWC_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n",
- (uint32_t)addr, dwc_read_reg32(addr));
- }
-/*
- if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
- addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
- DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n",
- (uint32_t)addr, dwc_read_reg32(addr));
- }
-*/
- addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
- DWC_PRINT("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
-
- addr=&core_if->dev_if->dev_global_regs->deachint;
- DWC_PRINT("DEACHINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->dev_global_regs->deachintmsk;
- DWC_PRINT("DEACHINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
- addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
- DWC_PRINT("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
- }
-
-
- for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
- addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
- DWC_PRINT("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
- }
-
- for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
- DWC_PRINT("Device IN EP %d Registers\n", i);
- addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
- DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->in_ep_regs[i]->diepint;
- DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
- DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
- DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
- DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
- DWC_PRINT("DIEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- }
-
-
- for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
- DWC_PRINT("Device OUT EP %d Registers\n", i);
- addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
- DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
- DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->out_ep_regs[i]->doepint;
- DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
- DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
- DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
- DWC_PRINT("DOEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- }
-
-
-
- return;
-}
-
-/**
- * This functions reads the SPRAM and prints its content
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
-{
- volatile uint8_t *addr, *start_addr, *end_addr;
-
- DWC_PRINT("SPRAM Data:\n");
- start_addr = (void*)core_if->core_global_regs;
- DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
- start_addr += 0x00028000;
- end_addr=(void*)core_if->core_global_regs;
- end_addr += 0x000280e0;
-
- for(addr = start_addr; addr < end_addr; addr+=16)
- {
- DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
- addr[0],
- addr[1],
- addr[2],
- addr[3],
- addr[4],
- addr[5],
- addr[6],
- addr[7],
- addr[8],
- addr[9],
- addr[10],
- addr[11],
- addr[12],
- addr[13],
- addr[14],
- addr[15]
- );
- }
-
- return;
-}
-/**
- * This function reads the host registers and prints them
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
-{
- int i;
- volatile uint32_t *addr;
-
- DWC_PRINT("Host Global Registers\n");
- addr=&core_if->host_if->host_global_regs->hcfg;
- DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->host_global_regs->hfir;
- DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->host_global_regs->hfnum;
- DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->host_global_regs->hptxsts;
- DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->host_global_regs->haint;
- DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->host_global_regs->haintmsk;
- DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=core_if->host_if->hprt0;
- DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- for (i=0; i<core_if->core_params->host_channels; i++)
- {
- DWC_PRINT("Host Channel %d Specific Registers\n", i);
- addr=&core_if->host_if->hc_regs[i]->hcchar;
- DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->hc_regs[i]->hcsplt;
- DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->hc_regs[i]->hcint;
- DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->hc_regs[i]->hcintmsk;
- DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->hc_regs[i]->hctsiz;
- DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->host_if->hc_regs[i]->hcdma;
- DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- }
- return;
-}
-
-/**
- * This function reads the core global registers and prints them
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
-{
- int i;
- volatile uint32_t *addr;
-
- DWC_PRINT("Core Global Registers\n");
- addr=&core_if->core_global_regs->gotgctl;
- DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gotgint;
- DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gahbcfg;
- DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gusbcfg;
- DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->grstctl;
- DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gintsts;
- DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gintmsk;
- DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->grxstsr;
- DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- //addr=&core_if->core_global_regs->grxstsp;
- //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->grxfsiz;
- DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gnptxfsiz;
- DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gnptxsts;
- DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gi2cctl;
- DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gpvndctl;
- DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->ggpio;
- DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->guid;
- DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->gsnpsid;
- DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->ghwcfg1;
- DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->ghwcfg2;
- DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->ghwcfg3;
- DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->ghwcfg4;
- DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&core_if->core_global_regs->hptxfsiz;
- DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- for (i=0; i<core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- {
- addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
- DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
- }
-}
-
-/**
- * Flush a Tx FIFO.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param num Tx FIFO to flush.
- */
-void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
- const int num)
-{
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
- volatile grstctl_t greset = { .d32 = 0};
- int count = 0;
-
- DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
-
- greset.b.txfflsh = 1;
- greset.b.txfnum = num;
- dwc_write_reg32(&global_regs->grstctl, greset.d32);
-
- do {
- greset.d32 = dwc_read_reg32(&global_regs->grstctl);
- if (++count > 10000) {
- DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
- __func__, greset.d32,
- dwc_read_reg32(&global_regs->gnptxsts));
- break;
- }
- }
- while (greset.b.txfflsh == 1);
-
- /* Wait for 3 PHY Clocks*/
- UDELAY(1);
-}
-
-/**
- * Flush Rx FIFO.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
- volatile grstctl_t greset = { .d32 = 0};
- int count = 0;
-
- DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
- /*
- *
- */
- greset.b.rxfflsh = 1;
- dwc_write_reg32(&global_regs->grstctl, greset.d32);
-
- do {
- greset.d32 = dwc_read_reg32(&global_regs->grstctl);
- if (++count > 10000) {
- DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
- greset.d32);
- break;
- }
- }
- while (greset.b.rxfflsh == 1);
-
- /* Wait for 3 PHY Clocks*/
- UDELAY(1);
-}
-
-/**
- * Do core a soft reset of the core. Be careful with this because it
- * resets all the internal state machines of the core.
- */
-void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
- volatile grstctl_t greset = { .d32 = 0};
- int count = 0;
-
- DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
- /* Wait for AHB master IDLE state. */
- do {
- UDELAY(10);
- greset.d32 = dwc_read_reg32(&global_regs->grstctl);
- if (++count > 100000) {
- DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
- greset.d32);
- return;
- }
- }
- while (greset.b.ahbidle == 0);
-
- /* Core Soft Reset */
- count = 0;
- greset.b.csftrst = 1;
- dwc_write_reg32(&global_regs->grstctl, greset.d32);
- do {
- greset.d32 = dwc_read_reg32(&global_regs->grstctl);
- if (++count > 10000) {
- DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
- greset.d32);
- break;
- }
- }
- while (greset.b.csftrst == 1);
-
- /* Wait for 3 PHY Clocks*/
- MDELAY(100);
-}
-
-
-
-/**
- * Register HCD callbacks. The callbacks are used to start and stop
- * the HCD for interrupt processing.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param cb the HCD callback structure.
- * @param p pointer to be passed to callback function (usb_hcd*).
- */
-void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
- dwc_otg_cil_callbacks_t *cb,
- void *p)
-{
- core_if->hcd_cb = cb;
- cb->p = p;
-}
-
-/**
- * Register PCD callbacks. The callbacks are used to start and stop
- * the PCD for interrupt processing.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param cb the PCD callback structure.
- * @param p pointer to be passed to callback function (pcd*).
- */
-void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
- dwc_otg_cil_callbacks_t *cb,
- void *p)
-{
- core_if->pcd_cb = cb;
- cb->p = p;
-}
-
-#ifdef DWC_EN_ISOC
-
-/**
- * This function writes isoc data per 1 (micro)frame into tx fifo
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- dwc_otg_dev_in_ep_regs_t *ep_regs;
- dtxfsts_data_t txstatus = {.d32 = 0};
- uint32_t len = 0;
- uint32_t dwords;
-
- ep->xfer_len = ep->data_per_frame;
- ep->xfer_count = 0;
-
- ep_regs = core_if->dev_if->in_ep_regs[ep->num];
-
- len = ep->xfer_len - ep->xfer_count;
-
- if (len > ep->maxpacket) {
- len = ep->maxpacket;
- }
-
- dwords = (len + 3)/4;
-
- /* While there is space in the queue and space in the FIFO and
- * More data to tranfer, Write packets to the Tx FIFO */
- txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
- DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
-
- while (txstatus.b.txfspcavail > dwords &&
- ep->xfer_count < ep->xfer_len &&
- ep->xfer_len != 0) {
- /* Write the FIFO */
- dwc_otg_ep_write_packet(core_if, ep, 0);
-
- len = ep->xfer_len - ep->xfer_count;
- if (len > ep->maxpacket) {
- len = ep->maxpacket;
- }
-
- dwords = (len + 3)/4;
- txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
- DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
- }
-}
-
-
-/**
- * This function initializes a descriptor chain for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- deptsiz_data_t deptsiz = { .d32 = 0 };
- depctl_data_t depctl = { .d32 = 0 };
- dsts_data_t dsts = { .d32 = 0 };
- volatile uint32_t *addr;
-
- if(ep->is_in) {
- addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
- } else {
- addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
- }
-
- ep->xfer_len = ep->data_per_frame;
- ep->xfer_count = 0;
- ep->xfer_buff = ep->cur_pkt_addr;
- ep->dma_addr = ep->cur_pkt_dma_addr;
-
- if(ep->is_in) {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- deptsiz.b.xfersize = ep->xfer_len;
- deptsiz.b.pktcnt =
- (ep->xfer_len - 1 + ep->maxpacket) /
- ep->maxpacket;
- deptsiz.b.mc = deptsiz.b.pktcnt;
- dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-
- /* Write the DMA register */
- if (core_if->dma_enable) {
- dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
- }
- } else {
- deptsiz.b.pktcnt =
- (ep->xfer_len + (ep->maxpacket - 1)) /
- ep->maxpacket;
- deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-
- dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-
- if (core_if->dma_enable) {
- dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
- (uint32_t)ep->dma_addr);
- }
- }
-
-
- /** Enable endpoint, clear nak */
-
- depctl.d32 = 0;
- if(ep->bInterval == 1) {
- dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
- ep->next_frame = dsts.b.soffn + ep->bInterval;
-
- if(ep->next_frame & 0x1) {
- depctl.b.setd1pid = 1;
- } else {
- depctl.b.setd0pid = 1;
- }
- } else {
- ep->next_frame += ep->bInterval;
-
- if(ep->next_frame & 0x1) {
- depctl.b.setd1pid = 1;
- } else {
- depctl.b.setd0pid = 1;
- }
- }
- depctl.b.epena = 1;
- depctl.b.cnak = 1;
-
- dwc_modify_reg32(addr, 0, depctl.d32);
- depctl.d32 = dwc_read_reg32(addr);
-
- if(ep->is_in && core_if->dma_enable == 0) {
- write_isoc_frame_data(core_if, ep);
- }
-
-}
-
-#endif //DWC_EN_ISOC
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.h
deleted file mode 100644
index 95079920a9..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.h
+++ /dev/null
@@ -1,1098 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1099526 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_CIL_H__)
-#define __DWC_CIL_H__
-
-#include <linux/workqueue.h>
-#include <linux/version.h>
-#include <asm/param.h>
-
-#include "linux/dwc_otg_plat.h"
-#include "dwc_otg_regs.h"
-#ifdef DEBUG
-#include "linux/timer.h"
-#endif
-
-/**
- * @file
- * This file contains the interface to the Core Interface Layer.
- */
-
-
-/** Macros defined for DWC OTG HW Release verison */
-#define OTG_CORE_REV_2_00 0x4F542000
-#define OTG_CORE_REV_2_60a 0x4F54260A
-#define OTG_CORE_REV_2_71a 0x4F54271A
-#define OTG_CORE_REV_2_72a 0x4F54272A
-
-/**
-*/
-typedef struct iso_pkt_info
-{
- uint32_t offset;
- uint32_t length;
- int32_t status;
-} iso_pkt_info_t;
-/**
- * The <code>dwc_ep</code> structure represents the state of a single
- * endpoint when acting in device mode. It contains the data items
- * needed for an endpoint to be activated and transfer packets.
- */
-typedef struct dwc_ep
-{
- /** EP number used for register address lookup */
- uint8_t num;
- /** EP direction 0 = OUT */
- unsigned is_in : 1;
- /** EP active. */
- unsigned active : 1;
-
- /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
- If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
- unsigned tx_fifo_num : 4;
- /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
- unsigned type : 2;
-#define DWC_OTG_EP_TYPE_CONTROL 0
-#define DWC_OTG_EP_TYPE_ISOC 1
-#define DWC_OTG_EP_TYPE_BULK 2
-#define DWC_OTG_EP_TYPE_INTR 3
-
- /** DATA start PID for INTR and BULK EP */
- unsigned data_pid_start : 1;
- /** Frame (even/odd) for ISOC EP */
- unsigned even_odd_frame : 1;
- /** Max Packet bytes */
- unsigned maxpacket : 11;
-
- /** Max Transfer size */
- unsigned maxxfer : 16;
-
- /** @name Transfer state */
- /** @{ */
-
- /**
- * Pointer to the beginning of the transfer buffer -- do not modify
- * during transfer.
- */
-
- uint32_t dma_addr;
-
- uint32_t dma_desc_addr;
- dwc_otg_dma_desc_t* desc_addr;
-
-
- uint8_t *start_xfer_buff;
- /** pointer to the transfer buffer */
- uint8_t *xfer_buff;
- /** Number of bytes to transfer */
- unsigned xfer_len : 19;
- /** Number of bytes transferred. */
- unsigned xfer_count : 19;
- /** Sent ZLP */
- unsigned sent_zlp : 1;
- /** Total len for control transfer */
- unsigned total_len : 19;
-
- /** stall clear flag */
- unsigned stall_clear_flag : 1;
-
- /** Allocated DMA Desc count */
- uint32_t desc_cnt;
-
-#ifdef DWC_EN_ISOC
- /**
- * Variables specific for ISOC EPs
- *
- */
- /** DMA addresses of ISOC buffers */
- uint32_t dma_addr0;
- uint32_t dma_addr1;
-
- uint32_t iso_dma_desc_addr;
- dwc_otg_dma_desc_t* iso_desc_addr;
-
- /** pointer to the transfer buffers */
- uint8_t *xfer_buff0;
- uint8_t *xfer_buff1;
-
- /** number of ISOC Buffer is processing */
- uint32_t proc_buf_num;
- /** Interval of ISOC Buffer processing */
- uint32_t buf_proc_intrvl;
- /** Data size for regular frame */
- uint32_t data_per_frame;
-
- /* todo - pattern data support is to be implemented in the future */
- /** Data size for pattern frame */
- uint32_t data_pattern_frame;
- /** Frame number of pattern data */
- uint32_t sync_frame;
-
- /** bInterval */
- uint32_t bInterval;
- /** ISO Packet number per frame */
- uint32_t pkt_per_frm;
- /** Next frame num for which will be setup DMA Desc */
- uint32_t next_frame;
- /** Number of packets per buffer processing */
- uint32_t pkt_cnt;
- /** Info for all isoc packets */
- iso_pkt_info_t *pkt_info;
- /** current pkt number */
- uint32_t cur_pkt;
- /** current pkt number */
- uint8_t *cur_pkt_addr;
- /** current pkt number */
- uint32_t cur_pkt_dma_addr;
-#endif //DWC_EN_ISOC
-/** @} */
-} dwc_ep_t;
-
-/*
- * Reasons for halting a host channel.
- */
-typedef enum dwc_otg_halt_status
-{
- DWC_OTG_HC_XFER_NO_HALT_STATUS,
- DWC_OTG_HC_XFER_COMPLETE,
- DWC_OTG_HC_XFER_URB_COMPLETE,
- DWC_OTG_HC_XFER_ACK,
- DWC_OTG_HC_XFER_NAK,
- DWC_OTG_HC_XFER_NYET,
- DWC_OTG_HC_XFER_STALL,
- DWC_OTG_HC_XFER_XACT_ERR,
- DWC_OTG_HC_XFER_FRAME_OVERRUN,
- DWC_OTG_HC_XFER_BABBLE_ERR,
- DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
- DWC_OTG_HC_XFER_AHB_ERR,
- DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
- DWC_OTG_HC_XFER_URB_DEQUEUE
-} dwc_otg_halt_status_e;
-
-/**
- * Host channel descriptor. This structure represents the state of a single
- * host channel when acting in host mode. It contains the data items needed to
- * transfer packets to an endpoint via a host channel.
- */
-typedef struct dwc_hc
-{
- /** Host channel number used for register address lookup */
- uint8_t hc_num;
-
- /** Device to access */
- unsigned dev_addr : 7;
-
- /** EP to access */
- unsigned ep_num : 4;
-
- /** EP direction. 0: OUT, 1: IN */
- unsigned ep_is_in : 1;
-
- /**
- * EP speed.
- * One of the following values:
- * - DWC_OTG_EP_SPEED_LOW
- * - DWC_OTG_EP_SPEED_FULL
- * - DWC_OTG_EP_SPEED_HIGH
- */
- unsigned speed : 2;
-#define DWC_OTG_EP_SPEED_LOW 0
-#define DWC_OTG_EP_SPEED_FULL 1
-#define DWC_OTG_EP_SPEED_HIGH 2
-
- /**
- * Endpoint type.
- * One of the following values:
- * - DWC_OTG_EP_TYPE_CONTROL: 0
- * - DWC_OTG_EP_TYPE_ISOC: 1
- * - DWC_OTG_EP_TYPE_BULK: 2
- * - DWC_OTG_EP_TYPE_INTR: 3
- */
- unsigned ep_type : 2;
-
- /** Max packet size in bytes */
- unsigned max_packet : 11;
-
- /**
- * PID for initial transaction.
- * 0: DATA0,<br>
- * 1: DATA2,<br>
- * 2: DATA1,<br>
- * 3: MDATA (non-Control EP),
- * SETUP (Control EP)
- */
- unsigned data_pid_start : 2;
-#define DWC_OTG_HC_PID_DATA0 0
-#define DWC_OTG_HC_PID_DATA2 1
-#define DWC_OTG_HC_PID_DATA1 2
-#define DWC_OTG_HC_PID_MDATA 3
-#define DWC_OTG_HC_PID_SETUP 3
-
- /** Number of periodic transactions per (micro)frame */
- unsigned multi_count: 2;
-
- /** @name Transfer State */
- /** @{ */
-
- /** Pointer to the current transfer buffer position. */
- uint8_t *xfer_buff;
- /** Total number of bytes to transfer. */
- uint32_t xfer_len;
- /** Number of bytes transferred so far. */
- uint32_t xfer_count;
- /** Packet count at start of transfer.*/
- uint16_t start_pkt_count;
-
- /**
- * Flag to indicate whether the transfer has been started. Set to 1 if
- * it has been started, 0 otherwise.
- */
- uint8_t xfer_started;
-
- /**
- * Set to 1 to indicate that a PING request should be issued on this
- * channel. If 0, process normally.
- */
- uint8_t do_ping;
-
- /**
- * Set to 1 to indicate that the error count for this transaction is
- * non-zero. Set to 0 if the error count is 0.
- */
- uint8_t error_state;
-
- /**
- * Set to 1 to indicate that this channel should be halted the next
- * time a request is queued for the channel. This is necessary in
- * slave mode if no request queue space is available when an attempt
- * is made to halt the channel.
- */
- uint8_t halt_on_queue;
-
- /**
- * Set to 1 if the host channel has been halted, but the core is not
- * finished flushing queued requests. Otherwise 0.
- */
- uint8_t halt_pending;
-
- /**
- * Reason for halting the host channel.
- */
- dwc_otg_halt_status_e halt_status;
-
- /*
- * Split settings for the host channel
- */
- uint8_t do_split; /**< Enable split for the channel */
- uint8_t complete_split; /**< Enable complete split */
- uint8_t hub_addr; /**< Address of high speed hub */
-
- uint8_t port_addr; /**< Port of the low/full speed device */
- /** Split transaction position
- * One of the following values:
- * - DWC_HCSPLIT_XACTPOS_MID
- * - DWC_HCSPLIT_XACTPOS_BEGIN
- * - DWC_HCSPLIT_XACTPOS_END
- * - DWC_HCSPLIT_XACTPOS_ALL */
- uint8_t xact_pos;
-
- /** Set when the host channel does a short read. */
- uint8_t short_read;
-
- /**
- * Number of requests issued for this channel since it was assigned to
- * the current transfer (not counting PINGs).
- */
- uint8_t requests;
-
- /**
- * Queue Head for the transfer being processed by this channel.
- */
- struct dwc_otg_qh *qh;
-
- /** @} */
-
- /** Entry in list of host channels. */
- struct list_head hc_list_entry;
-} dwc_hc_t;
-
-/**
- * The following parameters may be specified when starting the module. These
- * parameters define how the DWC_otg controller should be configured.
- * Parameter values are passed to the CIL initialization function
- * dwc_otg_cil_init.
- */
-typedef struct dwc_otg_core_params
-{
- int32_t opt;
-#define dwc_param_opt_default 1
-
- /**
- * Specifies the OTG capabilities. The driver will automatically
- * detect the value for this parameter if none is specified.
- * 0 - HNP and SRP capable (default)
- * 1 - SRP Only capable
- * 2 - No HNP/SRP capable
- */
- int32_t otg_cap;
-#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
-
- /**
- * Specifies whether to use slave or DMA mode for accessing the data
- * FIFOs. The driver will automatically detect the value for this
- * parameter if none is specified.
- * 0 - Slave
- * 1 - DMA (default, if available)
- */
- int32_t dma_enable;
-#define dwc_param_dma_enable_default 1
-
- /**
- * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data
- * FIFOs in device mode. The driver will automatically detect the value for this
- * parameter if none is specified.
- * 0 - address DMA
- * 1 - DMA Descriptor(default, if available)
- */
- int32_t dma_desc_enable;
-#define dwc_param_dma_desc_enable_default 0
- /** The DMA Burst size (applicable only for External DMA
- * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
- */
- int32_t dma_burst_size; /* Translate this to GAHBCFG values */
-#define dwc_param_dma_burst_size_default 32
-
- /**
- * Specifies the maximum speed of operation in host and device mode.
- * The actual speed depends on the speed of the attached device and
- * the value of phy_type. The actual speed depends on the speed of the
- * attached device.
- * 0 - High Speed (default)
- * 1 - Full Speed
- */
- int32_t speed;
-#define dwc_param_speed_default 0
-#define DWC_SPEED_PARAM_HIGH 0
-#define DWC_SPEED_PARAM_FULL 1
-
- /** Specifies whether low power mode is supported when attached
- * to a Full Speed or Low Speed device in host mode.
- * 0 - Don't support low power mode (default)
- * 1 - Support low power mode
- */
- int32_t host_support_fs_ls_low_power;
-#define dwc_param_host_support_fs_ls_low_power_default 0
-
- /** Specifies the PHY clock rate in low power mode when connected to a
- * Low Speed device in host mode. This parameter is applicable only if
- * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
- * then defaults to 6 MHZ otherwise 48 MHZ.
- *
- * 0 - 48 MHz
- * 1 - 6 MHz
- */
- int32_t host_ls_low_power_phy_clk;
-#define dwc_param_host_ls_low_power_phy_clk_default 0
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-
- /**
- * 0 - Use cC FIFO size parameters
- * 1 - Allow dynamic FIFO sizing (default)
- */
- int32_t enable_dynamic_fifo;
-#define dwc_param_enable_dynamic_fifo_default 1
-
- /** Total number of 4-byte words in the data FIFO memory. This
- * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
- * Tx FIFOs.
- * 32 to 32768 (default 8192)
- * Note: The total FIFO memory depth in the FPGA configuration is 8192.
- */
- int32_t data_fifo_size;
-#define dwc_param_data_fifo_size_default 8192
-
- /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
- * FIFO sizing is enabled.
- * 16 to 32768 (default 1064)
- */
- int32_t dev_rx_fifo_size;
-#define dwc_param_dev_rx_fifo_size_default 1064
-
- /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
- * when dynamic FIFO sizing is enabled.
- * 16 to 32768 (default 1024)
- */
- int32_t dev_nperio_tx_fifo_size;
-#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-
- /** Number of 4-byte words in each of the periodic Tx FIFOs in device
- * mode when dynamic FIFO sizing is enabled.
- * 4 to 768 (default 256)
- */
- uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-#define dwc_param_dev_perio_tx_fifo_size_default 256
-
- /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
- * FIFO sizing is enabled.
- * 16 to 32768 (default 1024)
- */
- int32_t host_rx_fifo_size;
-#define dwc_param_host_rx_fifo_size_default 1024
-
- /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
- * when Dynamic FIFO sizing is enabled in the core.
- * 16 to 32768 (default 1024)
- */
- int32_t host_nperio_tx_fifo_size;
-#define dwc_param_host_nperio_tx_fifo_size_default 1024
-
- /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
- * FIFO sizing is enabled.
- * 16 to 32768 (default 1024)
- */
- int32_t host_perio_tx_fifo_size;
-#define dwc_param_host_perio_tx_fifo_size_default 1024
-
- /** The maximum transfer size supported in bytes.
- * 2047 to 65,535 (default 65,535)
- */
- int32_t max_transfer_size;
-#define dwc_param_max_transfer_size_default 65535
-
- /** The maximum number of packets in a transfer.
- * 15 to 511 (default 511)
- */
- int32_t max_packet_count;
-#define dwc_param_max_packet_count_default 511
-
- /** The number of host channel registers to use.
- * 1 to 16 (default 12)
- * Note: The FPGA configuration supports a maximum of 12 host channels.
- */
- int32_t host_channels;
-#define dwc_param_host_channels_default 12
-
- /** The number of endpoints in addition to EP0 available for device
- * mode operations.
- * 1 to 15 (default 6 IN and OUT)
- * Note: The FPGA configuration supports a maximum of 6 IN and OUT
- * endpoints in addition to EP0.
- */
- int32_t dev_endpoints;
-#define dwc_param_dev_endpoints_default 6
-
- /**
- * Specifies the type of PHY interface to use. By default, the driver
- * will automatically detect the phy_type.
- *
- * 0 - Full Speed PHY
- * 1 - UTMI+ (default)
- * 2 - ULPI
- */
- int32_t phy_type;
-#define DWC_PHY_TYPE_PARAM_FS 0
-#define DWC_PHY_TYPE_PARAM_UTMI 1
-#define DWC_PHY_TYPE_PARAM_ULPI 2
-#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-
- /**
- * Specifies the UTMI+ Data Width. This parameter is
- * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
- * PHY_TYPE, this parameter indicates the data width between
- * the MAC and the ULPI Wrapper.) Also, this parameter is
- * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
- * to "8 and 16 bits", meaning that the core has been
- * configured to work at either data path width.
- *
- * 8 or 16 bits (default 16)
- */
- int32_t phy_utmi_width;
-#define dwc_param_phy_utmi_width_default 16
-
- /**
- * Specifies whether the ULPI operates at double or single
- * data rate. This parameter is only applicable if PHY_TYPE is
- * ULPI.
- *
- * 0 - single data rate ULPI interface with 8 bit wide data
- * bus (default)
- * 1 - double data rate ULPI interface with 4 bit wide data
- * bus
- */
- int32_t phy_ulpi_ddr;
-#define dwc_param_phy_ulpi_ddr_default 0
-
- /**
- * Specifies whether to use the internal or external supply to
- * drive the vbus with a ULPI phy.
- */
- int32_t phy_ulpi_ext_vbus;
-#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-
- /**
- * Specifies whether to use the I2Cinterface for full speed PHY. This
- * parameter is only applicable if PHY_TYPE is FS.
- * 0 - No (default)
- * 1 - Yes
- */
- int32_t i2c_enable;
-#define dwc_param_i2c_enable_default 0
-
- int32_t ulpi_fs_ls;
-#define dwc_param_ulpi_fs_ls_default 0
-
- int32_t ts_dline;
-#define dwc_param_ts_dline_default 0
-
- /**
- * Specifies whether dedicated transmit FIFOs are
- * enabled for non periodic IN endpoints in device mode
- * 0 - No
- * 1 - Yes
- */
- int32_t en_multiple_tx_fifo;
-#define dwc_param_en_multiple_tx_fifo_default 1
-
- /** Number of 4-byte words in each of the Tx FIFOs in device
- * mode when dynamic FIFO sizing is enabled.
- * 4 to 768 (default 256)
- */
- uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-#define dwc_param_dev_tx_fifo_size_default 256
-
- /** Thresholding enable flag-
- * bit 0 - enable non-ISO Tx thresholding
- * bit 1 - enable ISO Tx thresholding
- * bit 2 - enable Rx thresholding
- */
- uint32_t thr_ctl;
-#define dwc_param_thr_ctl_default 0
-
- /** Thresholding length for Tx
- * FIFOs in 32 bit DWORDs
- */
- uint32_t tx_thr_length;
-#define dwc_param_tx_thr_length_default 64
-
- /** Thresholding length for Rx
- * FIFOs in 32 bit DWORDs
- */
- uint32_t rx_thr_length;
-#define dwc_param_rx_thr_length_default 64
-
- /** Per Transfer Interrupt
- * mode enable flag
- * 1 - Enabled
- * 0 - Disabled
- */
- uint32_t pti_enable;
-#define dwc_param_pti_enable_default 0
-
- /** Molti Processor Interrupt
- * mode enable flag
- * 1 - Enabled
- * 0 - Disabled
- */
- uint32_t mpi_enable;
-#define dwc_param_mpi_enable_default 0
-
-} dwc_otg_core_params_t;
-
-#ifdef DEBUG
-struct dwc_otg_core_if;
-typedef struct hc_xfer_info
-{
- struct dwc_otg_core_if *core_if;
- dwc_hc_t *hc;
-} hc_xfer_info_t;
-#endif
-
-/**
- * The <code>dwc_otg_core_if</code> structure contains information needed to manage
- * the DWC_otg controller acting in either host or device mode. It
- * represents the programming view of the controller as a whole.
- */
-typedef struct dwc_otg_core_if
-{
- /** Parameters that define how the core should be configured.*/
- dwc_otg_core_params_t *core_params;
-
- /** Core Global registers starting at offset 000h. */
- dwc_otg_core_global_regs_t *core_global_regs;
-
- /** Device-specific information */
- dwc_otg_dev_if_t *dev_if;
- /** Host-specific information */
- dwc_otg_host_if_t *host_if;
-
- /** Value from SNPSID register */
- uint32_t snpsid;
-
- /*
- * Set to 1 if the core PHY interface bits in USBCFG have been
- * initialized.
- */
- uint8_t phy_init_done;
-
- /*
- * SRP Success flag, set by srp success interrupt in FS I2C mode
- */
- uint8_t srp_success;
- uint8_t srp_timer_started;
-
- /* Common configuration information */
- /** Power and Clock Gating Control Register */
- volatile uint32_t *pcgcctl;
-#define DWC_OTG_PCGCCTL_OFFSET 0xE00
-
- /** Push/pop addresses for endpoints or host channels.*/
- uint32_t *data_fifo[MAX_EPS_CHANNELS];
-#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
-#define DWC_OTG_DATA_FIFO_SIZE 0x1000
-
- /** Total RAM for FIFOs (Bytes) */
- uint16_t total_fifo_size;
- /** Size of Rx FIFO (Bytes) */
- uint16_t rx_fifo_size;
- /** Size of Non-periodic Tx FIFO (Bytes) */
- uint16_t nperio_tx_fifo_size;
-
-
- /** 1 if DMA is enabled, 0 otherwise. */
- uint8_t dma_enable;
-
- /** 1 if Descriptor DMA mode is enabled, 0 otherwise. */
- uint8_t dma_desc_enable;
-
- /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
- uint8_t pti_enh_enable;
-
- /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
- uint8_t multiproc_int_enable;
-
- /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
- uint8_t en_multiple_tx_fifo;
-
- /** Set to 1 if multiple packets of a high-bandwidth transfer is in
- * process of being queued */
- uint8_t queuing_high_bandwidth;
-
- /** Hardware Configuration -- stored here for convenience.*/
- hwcfg1_data_t hwcfg1;
- hwcfg2_data_t hwcfg2;
- hwcfg3_data_t hwcfg3;
- hwcfg4_data_t hwcfg4;
-
- /** Host and Device Configuration -- stored here for convenience.*/
- hcfg_data_t hcfg;
- dcfg_data_t dcfg;
-
- /** The operational State, during transations
- * (a_host>>a_peripherial and b_device=>b_host) this may not
- * match the core but allows the software to determine
- * transitions.
- */
- uint8_t op_state;
-
- /**
- * Set to 1 if the HCD needs to be restarted on a session request
- * interrupt. This is required if no connector ID status change has
- * occurred since the HCD was last disconnected.
- */
- uint8_t restart_hcd_on_session_req;
-
- /** HCD callbacks */
- /** A-Device is a_host */
-#define A_HOST (1)
- /** A-Device is a_suspend */
-#define A_SUSPEND (2)
- /** A-Device is a_peripherial */
-#define A_PERIPHERAL (3)
- /** B-Device is operating as a Peripheral. */
-#define B_PERIPHERAL (4)
- /** B-Device is operating as a Host. */
-#define B_HOST (5)
-
- /** HCD callbacks */
- struct dwc_otg_cil_callbacks *hcd_cb;
- /** PCD callbacks */
- struct dwc_otg_cil_callbacks *pcd_cb;
-
- /** Device mode Periodic Tx FIFO Mask */
- uint32_t p_tx_msk;
- /** Device mode Periodic Tx FIFO Mask */
- uint32_t tx_msk;
-
- /** Workqueue object used for handling several interrupts */
- struct workqueue_struct *wq_otg;
-
- /** Work object used for handling "Connector ID Status Change" Interrupt */
- struct work_struct w_conn_id;
-
- /** Work object used for handling "Wakeup Detected" Interrupt */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- struct work_struct w_wkp;
-#else
- struct delayed_work w_wkp;
-#endif
-
-#ifdef DEBUG
- uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
-
- hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
- struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS];
-
- uint32_t hfnum_7_samples;
- uint64_t hfnum_7_frrem_accum;
- uint32_t hfnum_0_samples;
- uint64_t hfnum_0_frrem_accum;
- uint32_t hfnum_other_samples;
- uint64_t hfnum_other_frrem_accum;
-#endif
-
-
-} dwc_otg_core_if_t;
-
-/*We must clear S3C24XX_EINTPEND external interrupt register
- * because after clearing in this register trigerred IRQ from
- * H/W core in kernel interrupt can be occured again before OTG
- * handlers clear all IRQ sources of Core registers because of
- * timing latencies and Low Level IRQ Type.
- */
-
-#ifdef CONFIG_MACH_IPMATE
-#define S3C2410X_CLEAR_EINTPEND() \
-do { \
- if (!dwc_otg_read_core_intr(core_if)) { \
- __raw_writel(1UL << 11,S3C24XX_EINTPEND); \
- } \
-} while (0)
-#else
-#define S3C2410X_CLEAR_EINTPEND() do { } while (0)
-#endif
-
-/*
- * The following functions are functions for works
- * using during handling some interrupts
- */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-
-extern void w_conn_id_status_change(void *p);
-extern void w_wakeup_detected(void *p);
-
-#else
-
-extern void w_conn_id_status_change(struct work_struct *p);
-extern void w_wakeup_detected(struct work_struct *p);
-
-#endif
-
-
-/*
- * The following functions support initialization of the CIL driver component
- * and the DWC_otg controller.
- */
-extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
- dwc_otg_core_params_t *_core_params);
-extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
-extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
-
-/** @name Device CIL Functions
- * The following functions support managing the DWC_otg controller in device
- * mode.
- */
-/**@{*/
-extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
-extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
-extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if);
-#ifdef DWC_EN_ISOC
-extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-#endif //DWC_EN_ISOC
-/**@}*/
-
-/** @name Host CIL Functions
- * The following functions support managing the DWC_otg controller in host
- * mode.
- */
-/**@{*/
-extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
- dwc_hc_t *_hc,
- dwc_otg_halt_status_e _halt_status);
-extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
-
-/**
- * This function Reads HPRT0 in preparation to modify. It keeps the
- * WC bits 0 so that if they are read as 1, they won't clear when you
- * write it back
- */
-static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
-{
- hprt0_data_t hprt0;
- hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
- hprt0.b.prtena = 0;
- hprt0.b.prtconndet = 0;
- hprt0.b.prtenchng = 0;
- hprt0.b.prtovrcurrchng = 0;
- return hprt0.d32;
-}
-
-extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
-/**@}*/
-
-/** @name Common CIL Functions
- * The following functions support managing the DWC_otg controller in either
- * device or host mode.
- */
-/**@{*/
-
-extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
- uint8_t *dest,
- uint16_t bytes);
-
-extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
-
-extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
- const int _num );
-extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
-extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
-
-extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count);
-extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count);
-
-/**
- * This function returns the Core Interrupt register.
- */
-static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if)
-{
- return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
- dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-}
-
-/**
- * This function returns the OTG Interrupt register.
- */
-static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if)
-{
- return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
-}
-
-/**
- * This function reads the Device All Endpoints Interrupt register and
- * returns the IN endpoint interrupt bits.
- */
-static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if)
-{
- uint32_t v;
-
- if(core_if->multiproc_int_enable) {
- v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
- dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
- } else {
- v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
- dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
- }
- return (v & 0xffff);
-
-}
-
-/**
- * This function reads the Device All Endpoints Interrupt register and
- * returns the OUT endpoint interrupt bits.
- */
-static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if)
-{
- uint32_t v;
-
- if(core_if->multiproc_int_enable) {
- v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
- dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
- } else {
- v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
- dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
- }
-
- return ((v & 0xffff0000) >> 16);
-}
-
-/**
- * This function returns the Device IN EP Interrupt register
- */
-static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if,
- dwc_ep_t *ep)
-{
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- uint32_t v, msk, emp;
-
- if(core_if->multiproc_int_enable) {
- msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]);
- emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
- msk |= ((emp >> ep->num) & 0x1) << 7;
- v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
- } else {
- msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
- emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
- msk |= ((emp >> ep->num) & 0x1) << 7;
- v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
- }
-
-
- return v;
-}
-/**
- * This function returns the Device OUT EP Interrupt register
- */
-static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
- dwc_ep_t *_ep)
-{
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- uint32_t v;
- doepmsk_data_t msk = { .d32 = 0 };
-
- if(_core_if->multiproc_int_enable) {
- msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]);
- if(_core_if->pti_enh_enable) {
- msk.b.pktdrpsts = 1;
- }
- v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
- } else {
- msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
- if(_core_if->pti_enh_enable) {
- msk.b.pktdrpsts = 1;
- }
- v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
- }
- return v;
-}
-
-/**
- * This function returns the Host All Channel Interrupt register
- */
-static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
-{
- return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
-}
-
-static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
-}
-
-
-/**
- * This function returns the mode of the operation, host or device.
- *
- * @return 0 - Device Mode, 1 - Host Mode
- */
-static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if)
-{
- return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
-}
-
-static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
-{
- return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
-}
-static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
-{
- return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
-}
-
-extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
-
-
-/**@}*/
-
-/**
- * DWC_otg CIL callback structure. This structure allows the HCD and
- * PCD to register functions used for starting and stopping the PCD
- * and HCD for role change on for a DRD.
- */
-typedef struct dwc_otg_cil_callbacks
-{
- /** Start function for role change */
- int (*start) (void *_p);
- /** Stop Function for role change */
- int (*stop) (void *_p);
- /** Disconnect Function for role change */
- int (*disconnect) (void *_p);
- /** Resume/Remote wakeup Function */
- int (*resume_wakeup) (void *_p);
- /** Suspend function */
- int (*suspend) (void *_p);
- /** Session Start (SRP) */
- int (*session_start) (void *_p);
- /** Pointer passed to start() and stop() */
- void *p;
-} dwc_otg_cil_callbacks_t;
-
-extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
- dwc_otg_cil_callbacks_t *_cb,
- void *_p);
-extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
- dwc_otg_cil_callbacks_t *_cb,
- void *_p);
-
-#endif
-
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
deleted file mode 100644
index 61b17b35dc..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1065567 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The Core Interface Layer provides basic services for accessing and
- * managing the DWC_otg hardware. These services are used by both the
- * Host Controller Driver and the Peripheral Controller Driver.
- *
- * This file contains the Common Interrupt handlers.
- */
-#include "linux/dwc_otg_plat.h"
-#include "dwc_otg_regs.h"
-#include "dwc_otg_cil.h"
-
-#ifdef DEBUG
-inline const char *op_state_str(dwc_otg_core_if_t *core_if)
-{
- return (core_if->op_state==A_HOST?"a_host":
- (core_if->op_state==A_SUSPEND?"a_suspend":
- (core_if->op_state==A_PERIPHERAL?"a_peripheral":
- (core_if->op_state==B_PERIPHERAL?"b_peripheral":
- (core_if->op_state==B_HOST?"b_host":
- "unknown")))));
-}
-#endif
-
-/** This function will log a debug message
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if)
-{
- gintsts_data_t gintsts;
- DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
- dwc_otg_mode(core_if) ? "Host" : "Device");
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.modemismatch = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-/** Start the HCD. Helper function for using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_start(dwc_otg_core_if_t *core_if)
-{
- if (core_if->hcd_cb && core_if->hcd_cb->start) {
- core_if->hcd_cb->start(core_if->hcd_cb->p);
- }
-}
-/** Stop the HCD. Helper function for using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_stop(dwc_otg_core_if_t *core_if)
-{
- if (core_if->hcd_cb && core_if->hcd_cb->stop) {
- core_if->hcd_cb->stop(core_if->hcd_cb->p);
- }
-}
-/** Disconnect the HCD. Helper function for using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_disconnect(dwc_otg_core_if_t *core_if)
-{
- if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
- core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
- }
-}
-/** Inform the HCD the a New Session has begun. Helper function for
- * using the HCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_session_start(dwc_otg_core_if_t *core_if)
-{
- if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
- core_if->hcd_cb->session_start(core_if->hcd_cb->p);
- }
-}
-
-/** Start the PCD. Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_start(dwc_otg_core_if_t *core_if)
-{
- if (core_if->pcd_cb && core_if->pcd_cb->start) {
- core_if->pcd_cb->start(core_if->pcd_cb->p);
- }
-}
-/** Stop the PCD. Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_stop(dwc_otg_core_if_t *core_if)
-{
- if (core_if->pcd_cb && core_if->pcd_cb->stop) {
- core_if->pcd_cb->stop(core_if->pcd_cb->p);
- }
-}
-/** Suspend the PCD. Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_suspend(dwc_otg_core_if_t *core_if)
-{
- if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
- core_if->pcd_cb->suspend(core_if->pcd_cb->p);
- }
-}
-/** Resume the PCD. Helper function for using the PCD callbacks.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_resume(dwc_otg_core_if_t *core_if)
-{
- if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
- core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
- }
-}
-
-/**
- * This function handles the OTG Interrupts. It reads the OTG
- * Interrupt Register (GOTGINT) to determine what interrupt has
- * occurred.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
- gotgint_data_t gotgint;
- gotgctl_data_t gotgctl;
- gintmsk_data_t gintmsk;
-
- gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
- gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
- DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32);
-
- if (gotgint.b.sesenddet) {
- DWC_DEBUGPL(DBG_ANY, "OTG Interrupt: "
- "Session End Detected++ (%s)\n",
- op_state_str(core_if));
- gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-
- if (core_if->op_state == B_HOST) {
- pcd_start(core_if);
- core_if->op_state = B_PERIPHERAL;
- } else {
- /* If not B_HOST and Device HNP still set. HNP
- * Did not succeed!*/
- if (gotgctl.b.devhnpen) {
- DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
- DWC_ERROR("Device Not Connected/Responding!\n");
- }
-
- /* If Session End Detected the B-Cable has
- * been disconnected. */
- /* Reset PCD and Gadget driver to a
- * clean state. */
- pcd_stop(core_if);
- }
- gotgctl.d32 = 0;
- gotgctl.b.devhnpen = 1;
- dwc_modify_reg32(&global_regs->gotgctl,
- gotgctl.d32, 0);
- }
- if (gotgint.b.sesreqsucstschng) {
- DWC_DEBUGPL(DBG_ANY, " OTG Interrupt: "
- "Session Reqeust Success Status Change++\n");
- gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
- if (gotgctl.b.sesreqscs) {
- if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
- (core_if->core_params->i2c_enable)) {
- core_if->srp_success = 1;
- }
- else {
- pcd_resume(core_if);
- /* Clear Session Request */
- gotgctl.d32 = 0;
- gotgctl.b.sesreq = 1;
- dwc_modify_reg32(&global_regs->gotgctl,
- gotgctl.d32, 0);
- }
- }
- }
- if (gotgint.b.hstnegsucstschng) {
- /* Print statements during the HNP interrupt handling
- * can cause it to fail.*/
- gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
- if (gotgctl.b.hstnegscs) {
- if (dwc_otg_is_host_mode(core_if)) {
- core_if->op_state = B_HOST;
- /*
- * Need to disable SOF interrupt immediately.
- * When switching from device to host, the PCD
- * interrupt handler won't handle the
- * interrupt if host mode is already set. The
- * HCD interrupt handler won't get called if
- * the HCD state is HALT. This means that the
- * interrupt does not get handled and Linux
- * complains loudly.
- */
- gintmsk.d32 = 0;
- gintmsk.b.sofintr = 1;
- dwc_modify_reg32(&global_regs->gintmsk,
- gintmsk.d32, 0);
- pcd_stop(core_if);
- /*
- * Initialize the Core for Host mode.
- */
- hcd_start(core_if);
- core_if->op_state = B_HOST;
- }
- } else {
- gotgctl.d32 = 0;
- gotgctl.b.hnpreq = 1;
- gotgctl.b.devhnpen = 1;
- dwc_modify_reg32(&global_regs->gotgctl,
- gotgctl.d32, 0);
- DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
- DWC_ERROR("Device Not Connected/Responding\n");
- }
- }
- if (gotgint.b.hstnegdet) {
- /* The disconnect interrupt is set at the same time as
- * Host Negotiation Detected. During the mode
- * switch all interrupts are cleared so the disconnect
- * interrupt handler will not get executed.
- */
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "Host Negotiation Detected++ (%s)\n",
- (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
- if (dwc_otg_is_device_mode(core_if)){
- DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state);
- hcd_disconnect(core_if);
- pcd_start(core_if);
- core_if->op_state = A_PERIPHERAL;
- } else {
- /*
- * Need to disable SOF interrupt immediately. When
- * switching from device to host, the PCD interrupt
- * handler won't handle the interrupt if host mode is
- * already set. The HCD interrupt handler won't get
- * called if the HCD state is HALT. This means that
- * the interrupt does not get handled and Linux
- * complains loudly.
- */
- gintmsk.d32 = 0;
- gintmsk.b.sofintr = 1;
- dwc_modify_reg32(&global_regs->gintmsk,
- gintmsk.d32, 0);
- pcd_stop(core_if);
- hcd_start(core_if);
- core_if->op_state = A_HOST;
- }
- }
- if (gotgint.b.adevtoutchng) {
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "A-Device Timeout Change++\n");
- }
- if (gotgint.b.debdone) {
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "Debounce Done++\n");
- }
-
- /* Clear GOTGINT */
- dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32);
-
- return 1;
-}
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-
-void w_conn_id_status_change(void *p)
-{
- dwc_otg_core_if_t *core_if = p;
-
-#else
-
-void w_conn_id_status_change(struct work_struct *p)
-{
- dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id);
-
-#endif
-
-
- uint32_t count = 0;
- gotgctl_data_t gotgctl = { .d32 = 0 };
-
- gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
- DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
- DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
-
- /* B-Device connector (Device Mode) */
- if (gotgctl.b.conidsts) {
- /* Wait for switch to device mode. */
- while (!dwc_otg_is_device_mode(core_if)){
- DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
- (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
- MDELAY(100);
- if (++count > 10000) *(uint32_t*)NULL=0;
- }
- core_if->op_state = B_PERIPHERAL;
- dwc_otg_core_init(core_if);
- dwc_otg_enable_global_interrupts(core_if);
- pcd_start(core_if);
- } else {
- /* A-Device connector (Host Mode) */
- while (!dwc_otg_is_host_mode(core_if)) {
- DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
- (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
- MDELAY(100);
- if (++count > 10000) *(uint32_t*)NULL=0;
- }
- core_if->op_state = A_HOST;
- /*
- * Initialize the Core for Host mode.
- */
- dwc_otg_core_init(core_if);
- dwc_otg_enable_global_interrupts(core_if);
- hcd_start(core_if);
- }
-}
-
-
-/**
- * This function handles the Connector ID Status Change Interrupt. It
- * reads the OTG Interrupt Register (GOTCTL) to determine whether this
- * is a Device to Host Mode transition or a Host Mode to Device
- * Transition.
- *
- * This only occurs when the cable is connected/removed from the PHY
- * connector.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if)
-{
-
- /*
- * Need to disable SOF interrupt immediately. If switching from device
- * to host, the PCD interrupt handler won't handle the interrupt if
- * host mode is already set. The HCD interrupt handler won't get
- * called if the HCD state is HALT. This means that the interrupt does
- * not get handled and Linux complains loudly.
- */
- gintmsk_data_t gintmsk = { .d32 = 0 };
- gintsts_data_t gintsts = { .d32 = 0 };
-
- gintmsk.b.sofintr = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-
- DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n",
- (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
-
- /*
- * Need to schedule a work, as there are possible DELAY function calls
- */
- queue_work(core_if->wq_otg, &core_if->w_conn_id);
-
- /* Set flag and clear interrupt */
- gintsts.b.conidstschng = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This interrupt indicates that a device is initiating the Session
- * Request Protocol to request the host to turn on bus power so a new
- * session can begin. The handler responds by turning on bus power. If
- * the DWC_otg controller is in low power mode, the handler brings the
- * controller out of low power mode before turning on bus power.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if)
-{
- gintsts_data_t gintsts;
-
-#ifndef DWC_HOST_ONLY
- hprt0_data_t hprt0;
- DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
-
- if (dwc_otg_is_device_mode(core_if)) {
- DWC_PRINT("SRP: Device mode\n");
- } else {
- DWC_PRINT("SRP: Host mode\n");
-
- /* Turn on the port power bit. */
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtpwr = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
- /* Start the Connection timer. So a message can be displayed
- * if connect does not occur within 10 seconds. */
- hcd_session_start(core_if);
- }
-#endif
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.sessreqintr = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-void w_wakeup_detected(void *p)
-{
- dwc_otg_core_if_t* core_if = p;
-
-#else
-
-void w_wakeup_detected(struct work_struct *p)
-{
- struct delayed_work *dw = container_of(p, struct delayed_work, work);
- dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp);
-
-#endif
- /*
- * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
- * so that OPT tests pass with all PHYs).
- */
- hprt0_data_t hprt0 = {.d32=0};
-#if 0
- pcgcctl_data_t pcgcctl = {.d32=0};
- /* Restart the Phy Clock */
- pcgcctl.b.stoppclk = 1;
- dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
- UDELAY(10);
-#endif //0
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
-// MDELAY(70);
- hprt0.b.prtres = 0; /* Resume */
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0));
-}
-/**
- * This interrupt indicates that the DWC_otg controller has detected a
- * resume or remote wakeup sequence. If the DWC_otg controller is in
- * low power mode, the handler must brings the controller out of low
- * power mode. The controller automatically begins resume
- * signaling. The handler schedules a time to stop resume signaling.
- */
-int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if)
-{
- gintsts_data_t gintsts;
-
- DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-
- if (dwc_otg_is_device_mode(core_if)) {
- dctl_data_t dctl = {.d32=0};
- DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
- dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts));
-#ifdef PARTIAL_POWER_DOWN
- if (core_if->hwcfg4.b.power_optimiz) {
- pcgcctl_data_t power = {.d32=0};
-
- power.d32 = dwc_read_reg32(core_if->pcgcctl);
- DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
-
- power.b.stoppclk = 0;
- dwc_write_reg32(core_if->pcgcctl, power.d32);
-
- power.b.pwrclmp = 0;
- dwc_write_reg32(core_if->pcgcctl, power.d32);
-
- power.b.rstpdwnmodule = 0;
- dwc_write_reg32(core_if->pcgcctl, power.d32);
- }
-#endif
- /* Clear the Remote Wakeup Signalling */
- dctl.b.rmtwkupsig = 1;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
- dctl.d32, 0);
-
- if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
- core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
- }
-
- } else {
- pcgcctl_data_t pcgcctl = {.d32=0};
-
- /* Restart the Phy Clock */
- pcgcctl.b.stoppclk = 1;
- dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
-
- queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1));
- }
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.wkupintr = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This interrupt indicates that a device has been disconnected from
- * the root port.
- */
-int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if)
-{
- gintsts_data_t gintsts;
-
- DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
- (dwc_otg_is_host_mode(core_if)?"Host":"Device"),
- op_state_str(core_if));
-
-/** @todo Consolidate this if statement. */
-#ifndef DWC_HOST_ONLY
- if (core_if->op_state == B_HOST) {
- /* If in device mode Disconnect and stop the HCD, then
- * start the PCD. */
- hcd_disconnect(core_if);
- pcd_start(core_if);
- core_if->op_state = B_PERIPHERAL;
- } else if (dwc_otg_is_device_mode(core_if)) {
- gotgctl_data_t gotgctl = { .d32 = 0 };
- gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
- if (gotgctl.b.hstsethnpen==1) {
- /* Do nothing, if HNP in process the OTG
- * interrupt "Host Negotiation Detected"
- * interrupt will do the mode switch.
- */
- } else if (gotgctl.b.devhnpen == 0) {
- /* If in device mode Disconnect and stop the HCD, then
- * start the PCD. */
- hcd_disconnect(core_if);
- pcd_start(core_if);
- core_if->op_state = B_PERIPHERAL;
- } else {
- DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
- }
- } else {
- if (core_if->op_state == A_HOST) {
- /* A-Cable still connected but device disconnected. */
- hcd_disconnect(core_if);
- }
- }
-#endif
-
- gintsts.d32 = 0;
- gintsts.b.disconnect = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-/**
- * This interrupt indicates that SUSPEND state has been detected on
- * the USB.
- *
- * For HNP the USB Suspend interrupt signals the change from
- * "a_peripheral" to "a_host".
- *
- * When power management is enabled the core will be put in low power
- * mode.
- */
-int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if)
-{
- dsts_data_t dsts;
- gintsts_data_t gintsts;
-
- DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
-
- if (dwc_otg_is_device_mode(core_if)) {
- /* Check the Device status register to determine if the Suspend
- * state is active. */
- dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
- DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
- DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
- "HWCFG4.power Optimize=%d\n",
- dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
-
-
-#ifdef PARTIAL_POWER_DOWN
-/** @todo Add a module parameter for power management. */
-
- if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
- pcgcctl_data_t power = {.d32=0};
- DWC_DEBUGPL(DBG_CIL, "suspend\n");
-
- power.b.pwrclmp = 1;
- dwc_write_reg32(core_if->pcgcctl, power.d32);
-
- power.b.rstpdwnmodule = 1;
- dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-
- power.b.stoppclk = 1;
- dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-
- } else {
- DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
- }
-#endif
- /* PCD callback for suspend. */
- pcd_suspend(core_if);
- } else {
- if (core_if->op_state == A_PERIPHERAL) {
- DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
- /* Clear the a_peripheral flag, back to a_host. */
- pcd_stop(core_if);
- hcd_start(core_if);
- core_if->op_state = A_HOST;
- }
- }
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.usbsuspend = 1;
- dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-
-/**
- * This function returns the Core Interrupt register.
- */
-static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if)
-{
- gintsts_data_t gintsts;
- gintmsk_data_t gintmsk;
- gintmsk_data_t gintmsk_common = {.d32=0};
- gintmsk_common.b.wkupintr = 1;
- gintmsk_common.b.sessreqintr = 1;
- gintmsk_common.b.conidstschng = 1;
- gintmsk_common.b.otgintr = 1;
- gintmsk_common.b.modemismatch = 1;
- gintmsk_common.b.disconnect = 1;
- gintmsk_common.b.usbsuspend = 1;
- /** @todo: The port interrupt occurs while in device
- * mode. Added code to CIL to clear the interrupt for now!
- */
- gintmsk_common.b.portintr = 1;
-
- gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
- gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
-#ifdef DEBUG
- /* if any common interrupts set */
- if (gintsts.d32 & gintmsk_common.d32) {
- DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n",
- gintsts.d32, gintmsk.d32);
- }
-#endif
-
- return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
-
-}
-
-/**
- * Common interrupt handler.
- *
- * The common interrupts are those that occur in both Host and Device mode.
- * This handler handles the following interrupts:
- * - Mode Mismatch Interrupt
- * - Disconnect Interrupt
- * - OTG Interrupt
- * - Connector ID Status Change Interrupt
- * - Session Request Interrupt.
- * - Resume / Remote Wakeup Detected Interrupt.
- *
- */
-int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if)
-{
- int retval = 0;
- gintsts_data_t gintsts;
-
- gintsts.d32 = dwc_otg_read_common_intr(core_if);
-
- if (gintsts.b.modemismatch) {
- retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
- }
- if (gintsts.b.otgintr) {
- retval |= dwc_otg_handle_otg_intr(core_if);
- }
- if (gintsts.b.conidstschng) {
- retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
- }
- if (gintsts.b.disconnect) {
- retval |= dwc_otg_handle_disconnect_intr(core_if);
- }
- if (gintsts.b.sessreqintr) {
- retval |= dwc_otg_handle_session_req_intr(core_if);
- }
- if (gintsts.b.wkupintr) {
- retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
- }
- if (gintsts.b.usbsuspend) {
- retval |= dwc_otg_handle_usb_suspend_intr(core_if);
- }
- if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
- /* The port interrupt occurs while in device mode with HPRT0
- * Port Enable/Disable.
- */
- gintsts.d32 = 0;
- gintsts.b.portintr = 1;
- dwc_write_reg32(&core_if->core_global_regs->gintsts,
- gintsts.d32);
- retval |= 1;
-
- }
-
- S3C2410X_CLEAR_EINTPEND();
-
- return retval;
-}
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c
deleted file mode 100644
index 87d3fbbbc2..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c
+++ /dev/null
@@ -1,1265 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
- * $Revision: 1.7 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 791271 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- * The dwc_otg_driver module provides the initialization and cleanup entry
- * points for the DWC_otg driver. This module will be dynamically installed
- * after Linux is booted using the insmod command. When the module is
- * installed, the dwc_otg_driver_init function is called. When the module is
- * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
- *
- * This module also defines a data structure for the dwc_otg_driver, which is
- * used in conjunction with the standard ARM platform_device structure. These
- * structures allow the OTG driver to comply with the standard Linux driver
- * model in which devices and drivers are registered with a bus driver. This
- * has the benefit that Linux can expose attributes of the driver and device
- * in its special sysfs file system. Users can then read or write files in
- * this file system to perform diagnostics on the driver components or the
- * device.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/stat.h> /* permission constants */
-#include <linux/version.h>
-#include <linux/platform_device.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-# include <linux/irq.h>
-#endif
-
-#include <asm/io.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-# include <asm/irq.h>
-#endif
-
-#include "linux/dwc_otg_plat.h"
-#include "dwc_otg_attr.h"
-#include "dwc_otg_driver.h"
-#include "dwc_otg_cil.h"
-#include "dwc_otg_pcd.h"
-#include "dwc_otg_hcd.h"
-
-#define DWC_DRIVER_VERSION "2.72a 24-JUN-2008"
-#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
-
-static const char dwc_driver_name[] = "dwc_otg";
-
-/*-------------------------------------------------------------------------*/
-/* Encapsulate the module parameter settings */
-
-static dwc_otg_core_params_t dwc_otg_module_params = {
- .opt = -1,
- .otg_cap = -1,
- .dma_enable = -1,
- .dma_desc_enable = -1,
- .dma_burst_size = -1,
- .speed = -1,
- .host_support_fs_ls_low_power = -1,
- .host_ls_low_power_phy_clk = -1,
- .enable_dynamic_fifo = -1,
- .data_fifo_size = -1,
- .dev_rx_fifo_size = -1,
- .dev_nperio_tx_fifo_size = -1,
- .dev_perio_tx_fifo_size = {
- /* dev_perio_tx_fifo_size_1 */
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1
- /* 15 */
- },
- .host_rx_fifo_size = -1,
- .host_nperio_tx_fifo_size = -1,
- .host_perio_tx_fifo_size = -1,
- .max_transfer_size = -1,
- .max_packet_count = -1,
- .host_channels = -1,
- .dev_endpoints = -1,
- .phy_type = -1,
- .phy_utmi_width = -1,
- .phy_ulpi_ddr = -1,
- .phy_ulpi_ext_vbus = -1,
- .i2c_enable = -1,
- .ulpi_fs_ls = -1,
- .ts_dline = -1,
- .en_multiple_tx_fifo = -1,
- .dev_tx_fifo_size = {
- /* dev_tx_fifo_size */
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1,
- -1
- /* 15 */
- },
- .thr_ctl = -1,
- .tx_thr_length = -1,
- .rx_thr_length = -1,
- .pti_enable = -1,
- .mpi_enable = -1,
-};
-
-/**
- * This function shows the Driver Version.
- */
-static ssize_t version_show(struct device_driver *dev, char *buf)
-{
- return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n",
- DWC_DRIVER_VERSION);
-}
-static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
-
-/**
- * Global Debug Level Mask.
- */
-uint32_t g_dbg_lvl = 0; /* OFF */
-
-/**
- * This function shows the driver Debug Level.
- */
-static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
-{
- return sprintf(buf, "0x%0x\n", g_dbg_lvl);
-}
-
-/**
- * This function stores the driver Debug Level.
- */
-static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
- size_t count)
-{
- g_dbg_lvl = simple_strtoul(buf, NULL, 16);
- return count;
-}
-static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
-
-/**
- * This function is called during module intialization to verify that
- * the module parameters are in a valid state.
- */
-static int check_parameters(dwc_otg_core_if_t *core_if)
-{
- int i;
- int retval = 0;
-
-/* Checks if the parameter is outside of its valid range of values */
-#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
- ((dwc_otg_module_params._param_ < (_low_)) || \
- (dwc_otg_module_params._param_ > (_high_)))
-
-/* If the parameter has been set by the user, check that the parameter value is
- * within the value range of values. If not, report a module error. */
-#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \
- do { \
- if (dwc_otg_module_params._param_ != -1) { \
- if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \
- DWC_ERROR("`%d' invalid for parameter `%s'\n", \
- dwc_otg_module_params._param_, _string_); \
- dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
- retval++; \
- } \
- } \
- } while (0)
-
- DWC_OTG_PARAM_ERR(opt,0,1,"opt");
- DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
- DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
- DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable");
- DWC_OTG_PARAM_ERR(speed,0,1,"speed");
- DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
- DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
- DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
- DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
- DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
- DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
- DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
- DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
- DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
- DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
- DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
- DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
- DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
- DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
- DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
- DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
- DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
- DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
- DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
-
- if (dwc_otg_module_params.dma_burst_size != -1) {
- if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) {
- DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
- dwc_otg_module_params.dma_burst_size);
- dwc_otg_module_params.dma_burst_size = 32;
- retval++;
- }
-
- {
- uint8_t brst_sz = 0;
- while(dwc_otg_module_params.dma_burst_size > 1) {
- brst_sz ++;
- dwc_otg_module_params.dma_burst_size >>= 1;
- }
- dwc_otg_module_params.dma_burst_size = brst_sz;
- }
- }
-
- if (dwc_otg_module_params.phy_utmi_width != -1) {
- if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) &&
- DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) {
- DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
- dwc_otg_module_params.phy_utmi_width);
- dwc_otg_module_params.phy_utmi_width = 16;
- retval++;
- }
- }
-
- for (i = 0; i < 15; i++) {
- /** @todo should be like above */
- //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size");
- if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
- if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) {
- DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
- dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
- dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
- retval++;
- }
- }
- }
-
- DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
-
- for (i = 0; i < 15; i++) {
- /** @todo should be like above */
- //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size");
- if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
- if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
- DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
- dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i);
- dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
- retval++;
- }
- }
- }
-
- DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
- DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
- DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
-
- DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable");
- DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable");
-
- /* At this point, all module parameters that have been set by the user
- * are valid, and those that have not are left unset. Now set their
- * default values and/or check the parameters against the hardware
- * configurations of the OTG core. */
-
-/* This sets the parameter to the default value if it has not been set by the
- * user */
-#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
- ({ \
- int changed = 1; \
- if (dwc_otg_module_params._param_ == -1) { \
- changed = 0; \
- dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
- } \
- changed; \
- })
-
-/* This checks the macro agains the hardware configuration to see if it is
- * valid. It is possible that the default value could be invalid. In this
- * case, it will report a module error if the user touched the parameter.
- * Otherwise it will adjust the value without any error. */
-#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \
- ({ \
- int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
- int error = 0; \
- if (!(_is_valid_)) { \
- if (changed) { \
- DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
- error = 1; \
- } \
- dwc_otg_module_params._param_ = (_set_valid_); \
- } \
- error; \
- })
-
- /* OTG Cap */
- retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap",
- ({
- int valid;
- valid = 1;
- switch (dwc_otg_module_params.otg_cap) {
- case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
- if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
- valid = 0;
- break;
- case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
- if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
- (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
- (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
- (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
- valid = 0;
- }
- break;
- case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
- /* always valid */
- break;
- }
- valid;
- }),
- (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
- (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
- (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
- (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
- DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable",
- ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
- 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable",
- ((dwc_otg_module_params.dma_desc_enable == 1) &&
- ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1,
- 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0);
-
- DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
- "host_support_fs_ls_low_power",
- 1, 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
- "enable_dynamic_fifo",
- ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
- (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
- "data_fifo_size",
- (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
- core_if->hwcfg3.b.dfifo_depth);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
- "dev_rx_fifo_size",
- (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
- dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
- "dev_nperio_tx_fifo_size",
- (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
- (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
- "host_rx_fifo_size",
- (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
- dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
- "host_nperio_tx_fifo_size",
- (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
- (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
- "host_perio_tx_fifo_size",
- (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
- ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
- "max_transfer_size",
- (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
- ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
- "max_packet_count",
- (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
- ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
- "host_channels",
- (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
- (core_if->hwcfg2.b.num_host_chan + 1));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
- "dev_endpoints",
- (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
- core_if->hwcfg2.b.num_dev_ep);
-
-/*
- * Define the following to disable the FS PHY Hardware checking. This is for
- * internal testing only.
- *
- * #define NO_FS_PHY_HW_CHECKS
- */
-
-#ifdef NO_FS_PHY_HW_CHECKS
- retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
- "phy_type", 1, 0);
-#else
- retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
- "phy_type",
- ({
- int valid = 0;
- if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
- ((core_if->hwcfg2.b.hs_phy_type == 1) ||
- (core_if->hwcfg2.b.hs_phy_type == 3))) {
- valid = 1;
- }
- else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
- ((core_if->hwcfg2.b.hs_phy_type == 2) ||
- (core_if->hwcfg2.b.hs_phy_type == 3))) {
- valid = 1;
- }
- else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
- (core_if->hwcfg2.b.fs_phy_type == 1)) {
- valid = 1;
- }
- valid;
- }),
- ({
- int set = DWC_PHY_TYPE_PARAM_FS;
- if (core_if->hwcfg2.b.hs_phy_type) {
- if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
- (core_if->hwcfg2.b.hs_phy_type == 1)) {
- set = DWC_PHY_TYPE_PARAM_UTMI;
- }
- else {
- set = DWC_PHY_TYPE_PARAM_ULPI;
- }
- }
- set;
- }));
-#endif
-
- retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed",
- (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
- dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
- "host_ls_low_power_phy_clk",
- ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
- ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
-
- DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
- DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
- DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
- DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
- DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
-
-#ifdef NO_FS_PHY_HW_CHECKS
- retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0);
-#else
- retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
- "i2c_enable",
- (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
- 0);
-#endif
-
- for (i = 0; i < 15; i++) {
- int changed = 1;
- int error = 0;
-
- if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
- changed = 0;
- dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
- }
- if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
- if (changed) {
- DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
- error = 1;
- }
- dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
- }
- retval += error;
- }
-
- retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo",
- ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1,
- 0);
-
- for (i = 0; i < 15; i++) {
- int changed = 1;
- int error = 0;
-
- if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
- changed = 0;
- dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
- }
- if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
- if (changed) {
- DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
- error = 1;
- }
- dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
- }
- retval += error;
- }
-
- retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl",
- ((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1,
- 0);
-
- DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
- DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable",
- ((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0,
- 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable",
- ((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0,
- 0);
- return retval;
-}
-
-/**
- * This function is the top level interrupt handler for the Common
- * (Device and host modes) interrupts.
- */
-static irqreturn_t dwc_otg_common_irq(int irq, void *dev
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
- , struct pt_regs *r
-#endif
- )
-{
- dwc_otg_device_t *otg_dev = dev;
- int32_t retval = IRQ_NONE;
-
- retval = dwc_otg_handle_common_intr(otg_dev->core_if);
- return IRQ_RETVAL(retval);
-}
-
-/**
- * This function is called when a platform_device is unregistered with the
- * dwc_otg_driver. This happens, for example, when the rmmod command is
- * executed. The device may or may not be electrically present. If it is
- * present, the driver stops device processing. Any resources used on behalf
- * of this device are freed.
- *
- * @param[in] pdev
- */
-static int dwc_otg_driver_remove(struct platform_device *pdev)
-{
- dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
- DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev);
-
- if (!otg_dev) {
- /* Memory allocation for the dwc_otg_device failed. */
- DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
- return 0;
- }
-
- /*
- * Free the IRQ
- */
- if (otg_dev->common_irq_installed) {
- free_irq(otg_dev->irq, otg_dev);
- }
-
-#ifndef DWC_DEVICE_ONLY
- if (otg_dev->hcd) {
- dwc_otg_hcd_remove(&pdev->dev);
- } else {
- DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
- return 0;
- }
-#endif
-
-#ifndef DWC_HOST_ONLY
- if (otg_dev->pcd) {
- dwc_otg_pcd_remove(&pdev->dev);
- }
-#endif
- if (otg_dev->core_if) {
- dwc_otg_cil_remove(otg_dev->core_if);
- }
-
- /*
- * Remove the device attributes
- */
- dwc_otg_attr_remove(otg_dev->parent);
-
- /* Disable USB port */
- dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0xf);
-
- /*
- * Return the memory.
- */
- if (otg_dev->base) {
- iounmap(otg_dev->base);
- }
-
- if (otg_dev->phys_addr != 0) {
- release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
- }
-
- kfree(otg_dev);
-
- /*
- * Clear the drvdata pointer.
- */
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-/**
- * This function is called when an platform_device is bound to a
- * dwc_otg_driver. It creates the driver components required to
- * control the device (CIL, HCD, and PCD) and it initializes the
- * device. The driver components are stored in a dwc_otg_device
- * structure. A reference to the dwc_otg_device is saved in the
- * platform_device. This allows the driver to access the dwc_otg_device
- * structure on subsequent calls to driver methods for this device.
- *
- * @param[in] pdev platform_device definition
- */
-static int dwc_otg_driver_probe(struct platform_device *pdev)
-{
- int retval = 0;
- uint32_t snpsid;
- dwc_otg_device_t *otg_dev;
- struct resource *res;
-
- dev_dbg(&pdev->dev, "dwc_otg_driver_probe(%p)\n", pdev);
-
- otg_dev= kzalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
- if (!otg_dev) {
- dev_err(&pdev->dev, "kmalloc of dwc_otg_device failed\n");
- retval = -ENOMEM;
- goto fail;
- }
-
- otg_dev->reg_offset = 0xFFFFFFFF;
-
- /*
- * Retrieve the memory and IRQ resources.
- */
- otg_dev->irq = platform_get_irq(pdev, 0);
- if (otg_dev->irq <= 0) {
- dev_err(&pdev->dev, "no device irq\n");
- retval = -EINVAL;
- goto fail;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "no CSR address\n");
- retval = -EINVAL;
- goto fail;
- }
-
- otg_dev->parent = &pdev->dev;
- otg_dev->phys_addr = res->start;
- otg_dev->base_len = res->end - res->start + 1;
- if (request_mem_region(otg_dev->phys_addr,
- otg_dev->base_len,
- dwc_driver_name) == NULL) {
- dev_err(&pdev->dev, "request_mem_region failed\n");
- retval = -EBUSY;
- goto fail;
- }
-
- /*
- * Map the DWC_otg Core memory into virtual address space.
- */
- otg_dev->base = ioremap(otg_dev->phys_addr, otg_dev->base_len);
- if (!otg_dev->base) {
- dev_err(&pdev->dev, "ioremap() failed\n");
- retval = -ENOMEM;
- goto fail;
- }
- dev_dbg(&pdev->dev, "mapped base=0x%08x\n", (unsigned) otg_dev->base);
-
- /* Enable USB Port */
- dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0);
-
- /*
- * Attempt to ensure this device is really a DWC_otg Controller.
- * Read and verify the SNPSID register contents. The value should be
- * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
- */
- snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0x40));
-
- if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) {
- dev_err(&pdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
- retval = -EINVAL;
- goto fail;
- }
-
- DWC_PRINT("Core Release: %x.%x%x%x\n",
- (snpsid >> 12 & 0xF),
- (snpsid >> 8 & 0xF),
- (snpsid >> 4 & 0xF),
- (snpsid & 0xF));
-
- /*
- * Initialize driver data to point to the global DWC_otg
- * Device structure.
- */
- platform_set_drvdata(pdev, otg_dev);
- dev_dbg(&pdev->dev, "dwc_otg_device=0x%p\n", otg_dev);
-
-
- otg_dev->core_if = dwc_otg_cil_init(otg_dev->base,
- &dwc_otg_module_params);
-
- otg_dev->core_if->snpsid = snpsid;
-
- if (!otg_dev->core_if) {
- dev_err(&pdev->dev, "CIL initialization failed!\n");
- retval = -ENOMEM;
- goto fail;
- }
-
- /*
- * Validate parameter values.
- */
- if (check_parameters(otg_dev->core_if)) {
- retval = -EINVAL;
- goto fail;
- }
-
- /*
- * Create Device Attributes in sysfs
- */
- dwc_otg_attr_create(&pdev->dev);
-
- /*
- * Disable the global interrupt until all the interrupt
- * handlers are installed.
- */
- dwc_otg_disable_global_interrupts(otg_dev->core_if);
-
- /*
- * Install the interrupt handler for the common interrupts before
- * enabling common interrupts in core_init below.
- */
- DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
- otg_dev->irq);
- retval = request_irq(otg_dev->irq, dwc_otg_common_irq,
- IRQF_SHARED, "dwc_otg", otg_dev);
- if (retval) {
- DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
- retval = -EBUSY;
- goto fail;
- } else {
- otg_dev->common_irq_installed = 1;
- }
-
- /*
- * Initialize the DWC_otg core.
- */
- dwc_otg_core_init(otg_dev->core_if);
-
-#ifndef DWC_HOST_ONLY
- /*
- * Initialize the PCD
- */
- retval = dwc_otg_pcd_init(&pdev->dev);
- if (retval != 0) {
- DWC_ERROR("dwc_otg_pcd_init failed\n");
- otg_dev->pcd = NULL;
- goto fail;
- }
-#endif
-#ifndef DWC_DEVICE_ONLY
- /*
- * Initialize the HCD
- */
- retval = dwc_otg_hcd_init(&pdev->dev);
- if (retval != 0) {
- DWC_ERROR("dwc_otg_hcd_init failed\n");
- otg_dev->hcd = NULL;
- goto fail;
- }
-#endif
-
- /*
- * Enable the global interrupt after all the interrupt
- * handlers are installed.
- */
- dwc_otg_enable_global_interrupts(otg_dev->core_if);
-
- return 0;
-
- fail:
- dwc_otg_driver_remove(pdev);
- return retval;
-}
-
-/**
- * This structure defines the methods to be called by a bus driver
- * during the lifecycle of a device on that bus. Both drivers and
- * devices are registered with a bus driver. The bus driver matches
- * devices to drivers based on information in the device and driver
- * structures.
- *
- * The probe function is called when the bus driver matches a device
- * to this driver. The remove function is called when a device is
- * unregistered with the bus driver.
- */
-static struct platform_driver dwc_otg_driver = {
- .driver = {
- .name = (char *)dwc_driver_name,
- },
- .probe = dwc_otg_driver_probe,
- .remove = dwc_otg_driver_remove,
-};
-
-/**
- * This function is called when the dwc_otg_driver is installed with the
- * insmod command. It registers the dwc_otg_driver structure with the
- * appropriate bus driver. This will cause the dwc_otg_driver_probe function
- * to be called. In addition, the bus driver will automatically expose
- * attributes defined for the device and driver in the special sysfs file
- * system.
- *
- * @return
- */
-static int __init dwc_otg_driver_init(void)
-{
- int retval = 0;
- int error;
-
- printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
-
- retval = platform_driver_register(&dwc_otg_driver);
- if (retval) {
- printk(KERN_ERR "%s retval=%d\n", __func__, retval);
- return retval;
- }
-
- error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
- error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
-
- return retval;
-}
-module_init(dwc_otg_driver_init);
-
-/**
- * This function is called when the driver is removed from the kernel
- * with the rmmod command. The driver unregisters itself with its bus
- * driver.
- *
- */
-static void __exit dwc_otg_driver_cleanup(void)
-{
- printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
-
- driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
- driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-
- platform_driver_unregister(&dwc_otg_driver);
-
- printk(KERN_INFO "%s module removed\n", dwc_driver_name);
-}
-module_exit(dwc_otg_driver_cleanup);
-
-MODULE_DESCRIPTION(DWC_DRIVER_DESC);
-MODULE_AUTHOR("Synopsys Inc.");
-MODULE_LICENSE("GPL");
-
-module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
-MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
-module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
-MODULE_PARM_DESC(opt, "OPT Mode");
-module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
-MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-
-module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444);
-MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
-
-module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
-MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
-module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
-MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
-MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
-module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
-MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
-module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
-MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
-module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
-MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
-MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
-/** @todo Set the max to 512K, modify checks */
-MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
-MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
-MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
-MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
-MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
-module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
-MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
-MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
-module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
-MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
-module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
-MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
-module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
-MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
-module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
-MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
-module_param_named(debug, g_dbg_lvl, int, 0444);
-MODULE_PARM_DESC(debug, "");
-
-module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
-MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
-module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
-
-module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
-MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
-module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
-MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
-module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
-MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
-
-module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
-MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled");
-
-module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
-MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled");
-
-/** @page "Module Parameters"
- *
- * The following parameters may be specified when starting the module.
- * These parameters define how the DWC_otg controller should be
- * configured. Parameter values are passed to the CIL initialization
- * function dwc_otg_cil_init
- *
- * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
- *
-
- <table>
- <tr><td>Parameter Name</td><td>Meaning</td></tr>
-
- <tr>
- <td>otg_cap</td>
- <td>Specifies the OTG capabilities. The driver will automatically detect the
- value for this parameter if none is specified.
- - 0: HNP and SRP capable (default, if available)
- - 1: SRP Only capable
- - 2: No HNP/SRP capable
- </td></tr>
-
- <tr>
- <td>dma_enable</td>
- <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
- The driver will automatically detect the value for this parameter if none is
- specified.
- - 0: Slave
- - 1: DMA (default, if available)
- </td></tr>
-
- <tr>
- <td>dma_burst_size</td>
- <td>The DMA Burst size (applicable only for External DMA Mode).
- - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
- </td></tr>
-
- <tr>
- <td>speed</td>
- <td>Specifies the maximum speed of operation in host and device mode. The
- actual speed depends on the speed of the attached device and the value of
- phy_type.
- - 0: High Speed (default)
- - 1: Full Speed
- </td></tr>
-
- <tr>
- <td>host_support_fs_ls_low_power</td>
- <td>Specifies whether low power mode is supported when attached to a Full
- Speed or Low Speed device in host mode.
- - 0: Don't support low power mode (default)
- - 1: Support low power mode
- </td></tr>
-
- <tr>
- <td>host_ls_low_power_phy_clk</td>
- <td>Specifies the PHY clock rate in low power mode when connected to a Low
- Speed device in host mode. This parameter is applicable only if
- HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
- - 0: 48 MHz (default)
- - 1: 6 MHz
- </td></tr>
-
- <tr>
- <td>enable_dynamic_fifo</td>
- <td> Specifies whether FIFOs may be resized by the driver software.
- - 0: Use cC FIFO size parameters
- - 1: Allow dynamic FIFO sizing (default)
- </td></tr>
-
- <tr>
- <td>data_fifo_size</td>
- <td>Total number of 4-byte words in the data FIFO memory. This memory
- includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
- - Values: 32 to 32768 (default 8192)
-
- Note: The total FIFO memory depth in the FPGA configuration is 8192.
- </td></tr>
-
- <tr>
- <td>dev_rx_fifo_size</td>
- <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
- FIFO sizing is enabled.
- - Values: 16 to 32768 (default 1064)
- </td></tr>
-
- <tr>
- <td>dev_nperio_tx_fifo_size</td>
- <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
- dynamic FIFO sizing is enabled.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
- <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
- when dynamic FIFO sizing is enabled.
- - Values: 4 to 768 (default 256)
- </td></tr>
-
- <tr>
- <td>host_rx_fifo_size</td>
- <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
- sizing is enabled.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>host_nperio_tx_fifo_size</td>
- <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
- dynamic FIFO sizing is enabled in the core.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>host_perio_tx_fifo_size</td>
- <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
- sizing is enabled.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>max_transfer_size</td>
- <td>The maximum transfer size supported in bytes.
- - Values: 2047 to 65,535 (default 65,535)
- </td></tr>
-
- <tr>
- <td>max_packet_count</td>
- <td>The maximum number of packets in a transfer.
- - Values: 15 to 511 (default 511)
- </td></tr>
-
- <tr>
- <td>host_channels</td>
- <td>The number of host channel registers to use.
- - Values: 1 to 16 (default 12)
-
- Note: The FPGA configuration supports a maximum of 12 host channels.
- </td></tr>
-
- <tr>
- <td>dev_endpoints</td>
- <td>The number of endpoints in addition to EP0 available for device mode
- operations.
- - Values: 1 to 15 (default 6 IN and OUT)
-
- Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
- addition to EP0.
- </td></tr>
-
- <tr>
- <td>phy_type</td>
- <td>Specifies the type of PHY interface to use. By default, the driver will
- automatically detect the phy_type.
- - 0: Full Speed
- - 1: UTMI+ (default, if available)
- - 2: ULPI
- </td></tr>
-
- <tr>
- <td>phy_utmi_width</td>
- <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
- phy_type of UTMI+. Also, this parameter is applicable only if the
- OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
- core has been configured to work at either data path width.
- - Values: 8 or 16 bits (default 16)
- </td></tr>
-
- <tr>
- <td>phy_ulpi_ddr</td>
- <td>Specifies whether the ULPI operates at double or single data rate. This
- parameter is only applicable if phy_type is ULPI.
- - 0: single data rate ULPI interface with 8 bit wide data bus (default)
- - 1: double data rate ULPI interface with 4 bit wide data bus
- </td></tr>
-
- <tr>
- <td>i2c_enable</td>
- <td>Specifies whether to use the I2C interface for full speed PHY. This
- parameter is only applicable if PHY_TYPE is FS.
- - 0: Disabled (default)
- - 1: Enabled
- </td></tr>
-
- <tr>
- <td>otg_en_multiple_tx_fifo</td>
- <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
- The driver will automatically detect the value for this parameter if none is
- specified.
- - 0: Disabled
- - 1: Enabled (default, if available)
- </td></tr>
-
- <tr>
- <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
- <td>Number of 4-byte words in each of the Tx FIFOs in device mode
- when dynamic FIFO sizing is enabled.
- - Values: 4 to 768 (default 256)
- </td></tr>
-
-*/
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.h
deleted file mode 100644
index fd7f0a4b9d..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1064918 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#ifndef __DWC_OTG_DRIVER_H__
-#define __DWC_OTG_DRIVER_H__
-
-/** @file
- * This file contains the interface to the Linux driver.
- */
-#include "dwc_otg_cil.h"
-
-/* Type declarations */
-struct dwc_otg_pcd;
-struct dwc_otg_hcd;
-
-/**
- * This structure is a wrapper that encapsulates the driver components used to
- * manage a single DWC_otg controller.
- */
-typedef struct dwc_otg_device {
- /** Base address returned from ioremap() */
- void *base;
-
- struct device *parent;
-
- /** Pointer to the core interface structure. */
- dwc_otg_core_if_t *core_if;
-
- /** Register offset for Diagnostic API. */
- uint32_t reg_offset;
-
- /** Pointer to the PCD structure. */
- struct dwc_otg_pcd *pcd;
-
- /** Pointer to the HCD structure. */
- struct dwc_otg_hcd *hcd;
-
- /** Flag to indicate whether the common IRQ handler is installed. */
- uint8_t common_irq_installed;
-
- /* Interrupt request number. */
- unsigned int irq;
-
- /* Physical address of Control and Status registers, used by
- * release_mem_region().
- */
- resource_size_t phys_addr;
-
- /* Length of memory region, used by release_mem_region(). */
- unsigned long base_len;
-} dwc_otg_device_t;
-
-#endif
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.c
deleted file mode 100644
index fe643b6460..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.c
+++ /dev/null
@@ -1,2852 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
- * $Revision: 1.4 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1064940 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-/**
- * @file
- *
- * This file contains the implementation of the HCD. In Linux, the HCD
- * implements the hc_driver API.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/version.h>
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_hcd.h"
-#include "dwc_otg_regs.h"
-
-static const char dwc_otg_hcd_name[] = "dwc_otg";
-
-static const struct hc_driver dwc_otg_hc_driver = {
-
- .description = dwc_otg_hcd_name,
- .product_desc = "DWC OTG Controller",
- .hcd_priv_size = sizeof(dwc_otg_hcd_t),
-
- .irq = dwc_otg_hcd_irq,
-
- .flags = HCD_MEMORY | HCD_USB2,
-
- //.reset =
- .start = dwc_otg_hcd_start,
- //.suspend =
- //.resume =
- .stop = dwc_otg_hcd_stop,
-
- .urb_enqueue = dwc_otg_hcd_urb_enqueue,
- .urb_dequeue = dwc_otg_hcd_urb_dequeue,
- .endpoint_disable = dwc_otg_hcd_endpoint_disable,
-
- .get_frame_number = dwc_otg_hcd_get_frame_number,
-
- .hub_status_data = dwc_otg_hcd_hub_status_data,
- .hub_control = dwc_otg_hcd_hub_control,
- //.hub_suspend =
- //.hub_resume =
-};
-
-/**
- * Work queue function for starting the HCD when A-Cable is connected.
- * The dwc_otg_hcd_start() must be called in a process context.
- */
-static void hcd_start_func(
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- void *_vp
-#else
- struct work_struct *_work
-#endif
- )
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- struct usb_hcd *usb_hcd = (struct usb_hcd *)_vp;
-#else
- struct delayed_work *dw = container_of(_work, struct delayed_work, work);
- struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work);
- struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv);
-#endif
- DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
- if (usb_hcd) {
- dwc_otg_hcd_start(usb_hcd);
- }
-}
-
-/**
- * HCD Callback function for starting the HCD when A-Cable is
- * connected.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_start_cb(void *p)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
- dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
- hprt0_data_t hprt0;
-
- if (core_if->op_state == B_HOST) {
- /*
- * Reset the port. During a HNP mode switch the reset
- * needs to occur within 1ms and have a duration of at
- * least 50ms.
- */
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtrst = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- ((struct usb_hcd *)p)->self.is_b_host = 1;
- } else {
- ((struct usb_hcd *)p)->self.is_b_host = 0;
- }
-
- /* Need to start the HCD in a non-interrupt context. */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
-// INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
-#else
-// INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
- INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-#endif
-// schedule_work(&dwc_otg_hcd->start_work);
- queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000);
-
- return 1;
-}
-
-/**
- * HCD Callback function for stopping the HCD.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_stop_cb(void *p)
-{
- struct usb_hcd *usb_hcd = (struct usb_hcd *)p;
- DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
- dwc_otg_hcd_stop(usb_hcd);
- return 1;
-}
-
-static void del_xfer_timers(dwc_otg_hcd_t *hcd)
-{
-#ifdef DEBUG
- int i;
- int num_channels = hcd->core_if->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- del_timer(&hcd->core_if->hc_xfer_timer[i]);
- }
-#endif
-}
-
-static void del_timers(dwc_otg_hcd_t *hcd)
-{
- del_xfer_timers(hcd);
- del_timer(&hcd->conn_timer);
-}
-
-/**
- * Processes all the URBs in a single list of QHs. Completes them with
- * -ETIMEDOUT and frees the QTD.
- */
-static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-{
- struct list_head *qh_item;
- dwc_otg_qh_t *qh;
- struct list_head *qtd_item;
- dwc_otg_qtd_t *qtd;
-
- list_for_each(qh_item, qh_list) {
- qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
- for (qtd_item = qh->qtd_list.next;
- qtd_item != &qh->qtd_list;
- qtd_item = qh->qtd_list.next) {
- qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
- if (qtd->urb != NULL) {
- dwc_otg_hcd_complete_urb(hcd, qtd->urb,
- -ETIMEDOUT);
- }
- dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
- }
- }
-}
-
-/**
- * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
- * and periodic schedules. The QTD associated with each URB is removed from
- * the schedule and freed. This function may be called when a disconnect is
- * detected or when the HCD is being stopped.
- */
-static void kill_all_urbs(dwc_otg_hcd_t *hcd)
-{
- kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
- kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
- kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
- kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
- kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
- kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
-}
-
-/**
- * HCD Callback function for disconnect of the HCD.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_disconnect_cb(void *p)
-{
- gintsts_data_t intr;
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-
- //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-
- /*
- * Set status flags for the hub driver.
- */
- dwc_otg_hcd->flags.b.port_connect_status_change = 1;
- dwc_otg_hcd->flags.b.port_connect_status = 0;
-
- /*
- * Shutdown any transfers in process by clearing the Tx FIFO Empty
- * interrupt mask and status bits and disabling subsequent host
- * channel interrupts.
- */
- intr.d32 = 0;
- intr.b.nptxfempty = 1;
- intr.b.ptxfempty = 1;
- intr.b.hcintr = 1;
- dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
- dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
-
- del_timers(dwc_otg_hcd);
-
- /*
- * Turn off the vbus power only if the core has transitioned to device
- * mode. If still in host mode, need to keep power on to detect a
- * reconnection.
- */
- if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
- if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
- hprt0_data_t hprt0 = { .d32=0 };
- DWC_PRINT("Disconnect: PortPower off\n");
- hprt0.b.prtpwr = 0;
- dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
- }
-
- dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
- }
-
- /* Respond with an error status to all URBs in the schedule. */
- kill_all_urbs(dwc_otg_hcd);
-
- if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
- /* Clean up any host channels that were in use. */
- int num_channels;
- int i;
- dwc_hc_t *channel;
- dwc_otg_hc_regs_t *hc_regs;
- hcchar_data_t hcchar;
-
- num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-
- if (!dwc_otg_hcd->core_if->dma_enable) {
- /* Flush out any channel requests in slave mode. */
- for (i = 0; i < num_channels; i++) {
- channel = dwc_otg_hcd->hc_ptr_array[i];
- if (list_empty(&channel->hc_list_entry)) {
- hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- hcchar.b.chen = 0;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- }
- }
- }
- }
-
- for (i = 0; i < num_channels; i++) {
- channel = dwc_otg_hcd->hc_ptr_array[i];
- if (list_empty(&channel->hc_list_entry)) {
- hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- /* Halt the channel. */
- hcchar.b.chdis = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- }
-
- dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
- list_add_tail(&channel->hc_list_entry,
- &dwc_otg_hcd->free_hc_list);
- }
- }
- }
-
- /* A disconnect will end the session so the B-Device is no
- * longer a B-host. */
- ((struct usb_hcd *)p)->self.is_b_host = 0;
- return 1;
-}
-
-/**
- * Connection timeout function. An OTG host is required to display a
- * message if the device does not connect within 10 seconds.
- */
-void dwc_otg_hcd_connect_timeout(unsigned long ptr)
-{
- DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr);
- DWC_PRINT("Connect Timeout\n");
- DWC_ERROR("Device Not Connected/Responding\n");
-}
-
-/**
- * Start the connection timer. An OTG host is required to display a
- * message if the device does not connect within 10 seconds. The
- * timer is deleted if a port connect interrupt occurs before the
- * timer expires.
- */
-static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd)
-{
- init_timer(&hcd->conn_timer);
- hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
- hcd->conn_timer.data = 0;
- hcd->conn_timer.expires = jiffies + (HZ * 10);
- add_timer(&hcd->conn_timer);
-}
-
-/**
- * HCD Callback function for disconnect of the HCD.
- *
- * @param p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_session_start_cb(void *p)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
- DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
- dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
- return 1;
-}
-
-/**
- * HCD Callback structure for handling mode switching.
- */
-static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
- .start = dwc_otg_hcd_start_cb,
- .stop = dwc_otg_hcd_stop_cb,
- .disconnect = dwc_otg_hcd_disconnect_cb,
- .session_start = dwc_otg_hcd_session_start_cb,
- .p = 0,
-};
-
-/**
- * Reset tasklet function
- */
-static void reset_tasklet_func(unsigned long data)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data;
- dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
- hprt0_data_t hprt0;
-
- DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
-
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtrst = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- mdelay(60);
-
- hprt0.b.prtrst = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- dwc_otg_hcd->flags.b.port_reset_change = 1;
-}
-
-static struct tasklet_struct reset_tasklet = {
- .next = NULL,
- .state = 0,
- .count = ATOMIC_INIT(0),
- .func = reset_tasklet_func,
- .data = 0,
-};
-
-/**
- * Initializes the HCD. This function allocates memory for and initializes the
- * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
- * USB bus with the core and calls the hc_driver->start() function. It returns
- * a negative error on failure.
- */
-int dwc_otg_hcd_init(struct device *dev)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
- struct usb_hcd *hcd = NULL;
- dwc_otg_hcd_t *dwc_otg_hcd = NULL;
-
- int num_channels;
- int i;
- dwc_hc_t *channel;
-
- int retval = 0;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- /* 2.6.20+ requires dev.dma_mask to be set prior to calling usb_create_hcd() */
-
- /* Set device flags indicating whether the HCD supports DMA. */
- if (otg_dev->core_if->dma_enable) {
- DWC_PRINT("Using DMA mode\n");
- dev->dma_mask = (void *)~0;
- dev->coherent_dma_mask = ~0;
-
- if (otg_dev->core_if->dma_desc_enable) {
- DWC_PRINT("Device using Descriptor DMA mode\n");
- } else {
- DWC_PRINT("Device using Buffer DMA mode\n");
- }
- } else {
- DWC_PRINT("Using Slave mode\n");
- dev->dma_mask = (void *)0;
- dev->coherent_dma_mask = 0;
- }
-#endif
- /*
- * Allocate memory for the base HCD plus the DWC OTG HCD.
- * Initialize the base HCD.
- */
- hcd = usb_create_hcd(&dwc_otg_hc_driver, dev, dev_name(dev));
- if (!hcd) {
- retval = -ENOMEM;
- goto error1;
- }
-
- dev_set_drvdata(dev, otg_dev);
- hcd->regs = otg_dev->base;
- hcd->rsrc_start = otg_dev->phys_addr;
- hcd->rsrc_len = otg_dev->base_len;
- hcd->self.otg_port = 1;
- hcd->has_tt = 1;
-
- /* Initialize the DWC OTG HCD. */
- dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- dwc_otg_hcd->core_if = otg_dev->core_if;
- otg_dev->hcd = dwc_otg_hcd;
-
- /* */
- spin_lock_init(&dwc_otg_hcd->lock);
-
- /* Register the HCD CIL Callbacks */
- dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
- &hcd_cil_callbacks, hcd);
-
- /* Initialize the non-periodic schedule. */
- INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
- INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
-
- /* Initialize the periodic schedule. */
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
-
- /*
- * Create a host channel descriptor for each host channel implemented
- * in the controller. Initialize the channel descriptor array.
- */
- INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
- num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
- memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array));
- for (i = 0; i < num_channels; i++) {
- channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
- if (channel == NULL) {
- retval = -ENOMEM;
- DWC_ERROR("%s: host channel allocation failed\n", __func__);
- goto error2;
- }
- memset(channel, 0, sizeof(dwc_hc_t));
- channel->hc_num = i;
- dwc_otg_hcd->hc_ptr_array[i] = channel;
-#ifdef DEBUG
- init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
-#endif
- DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
- }
-
- /* Initialize the Connection timeout timer. */
- init_timer(&dwc_otg_hcd->conn_timer);
-
- /* Initialize reset tasklet. */
- reset_tasklet.data = (unsigned long) dwc_otg_hcd;
- dwc_otg_hcd->reset_tasklet = &reset_tasklet;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- /* Set device flags indicating whether the HCD supports DMA. */
- if (otg_dev->core_if->dma_enable) {
- DWC_PRINT("Using DMA mode\n");
- dev->dma_mask = (void *)~0;
- dev->coherent_dma_mask = ~0;
-
- if (otg_dev->core_if->dma_desc_enable){
- DWC_PRINT("Device using Descriptor DMA mode\n");
- } else {
- DWC_PRINT("Device using Buffer DMA mode\n");
- }
- } else {
- DWC_PRINT("Using Slave mode\n");
- dev->dma_mask = (void *)0;
- dev->dev.coherent_dma_mask = 0;
- }
-#endif
- /*
- * Finish generic HCD initialization and start the HCD. This function
- * allocates the DMA buffer pool, registers the USB bus, requests the
- * IRQ line, and calls dwc_otg_hcd_start method.
- */
- retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
- if (retval < 0) {
- goto error2;
- }
-
- /*
- * Allocate space for storing data on status transactions. Normally no
- * data is sent, but this space acts as a bit bucket. This must be
- * done after usb_add_hcd since that function allocates the DMA buffer
- * pool.
- */
- if (otg_dev->core_if->dma_enable) {
- dwc_otg_hcd->status_buf =
- dma_alloc_coherent(dev,
- DWC_OTG_HCD_STATUS_BUF_SIZE,
- &dwc_otg_hcd->status_buf_dma,
- GFP_KERNEL | GFP_DMA);
- } else {
- dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
- GFP_KERNEL);
- }
- if (!dwc_otg_hcd->status_buf) {
- retval = -ENOMEM;
- DWC_ERROR("%s: status_buf allocation failed\n", __func__);
- goto error3;
- }
-
- dwc_otg_hcd->otg_dev = otg_dev;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
- dev_name(dev), hcd->self.busnum);
-
- return 0;
-
- /* Error conditions */
- error3:
- usb_remove_hcd(hcd);
- error2:
- dwc_otg_hcd_free(hcd);
- usb_put_hcd(hcd);
-
- /* FIXME: 2008/05/03 by Steven
- * write back to device:
- * dwc_otg_hcd has already been released by dwc_otg_hcd_free()
- */
- dev_set_drvdata(dev, otg_dev);
-
- error1:
- return retval;
-}
-
-/**
- * Removes the HCD.
- * Frees memory and resources associated with the HCD and deregisters the bus.
- */
-void dwc_otg_hcd_remove(struct device *dev)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
- dwc_otg_hcd_t *dwc_otg_hcd;
- struct usb_hcd *hcd;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
-
- if (!otg_dev) {
- DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
- return;
- }
-
- dwc_otg_hcd = otg_dev->hcd;
-
- if (!dwc_otg_hcd) {
- DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
- return;
- }
-
- hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
-
- if (!hcd) {
- DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__);
- return;
- }
-
- /* Turn off all interrupts */
- dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
- dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
-
- usb_remove_hcd(hcd);
- dwc_otg_hcd_free(hcd);
- usb_put_hcd(hcd);
-}
-
-/* =========================================================================
- * Linux HC Driver Functions
- * ========================================================================= */
-
-/**
- * Initializes dynamic portions of the DWC_otg HCD state.
- */
-static void hcd_reinit(dwc_otg_hcd_t *hcd)
-{
- struct list_head *item;
- int num_channels;
- int i;
- dwc_hc_t *channel;
-
- hcd->flags.d32 = 0;
-
- hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
- hcd->non_periodic_channels = 0;
- hcd->periodic_channels = 0;
-
- /*
- * Put all channels in the free channel list and clean up channel
- * states.
- */
- item = hcd->free_hc_list.next;
- while (item != &hcd->free_hc_list) {
- list_del(item);
- item = hcd->free_hc_list.next;
- }
- num_channels = hcd->core_if->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- channel = hcd->hc_ptr_array[i];
- list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list);
- dwc_otg_hc_cleanup(hcd->core_if, channel);
- }
-
- /* Initialize the DWC core for host mode operation. */
- dwc_otg_core_host_init(hcd->core_if);
-}
-
-/** Initializes the DWC_otg controller and its root hub and prepares it for host
- * mode operation. Activates the root port. Returns 0 on success and a negative
- * error code on failure. */
-int dwc_otg_hcd_start(struct usb_hcd *hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
- struct usb_bus *bus;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- struct usb_device *udev;
- int retval;
-#endif
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
-
- bus = hcd_to_bus(hcd);
-
- /* Initialize the bus state. If the core is in Device Mode
- * HALT the USB bus and return. */
- if (dwc_otg_is_device_mode(core_if)) {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- hcd->state = HC_STATE_HALT;
-#else
- hcd->state = HC_STATE_RUNNING;
-#endif
- return 0;
- }
- hcd->state = HC_STATE_RUNNING;
-
- /* Initialize and connect root hub if one is not already attached */
- if (bus->root_hub) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
- /* Inform the HUB driver to resume. */
- usb_hcd_resume_root_hub(hcd);
- }
- else {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n");
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- udev = usb_alloc_dev(NULL, bus, 0);
- udev->speed = USB_SPEED_HIGH;
- if (!udev) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
- return -ENODEV;
- }
- if ((retval = usb_hcd_register_root_hub(udev, hcd)) != 0) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
- return -ENODEV;
- }
-#endif
- }
-
- hcd_reinit(dwc_otg_hcd);
-
- return 0;
-}
-
-static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-{
- struct list_head *item;
- dwc_otg_qh_t *qh;
-
- if (!qh_list->next) {
- /* The list hasn't been initialized yet. */
- return;
- }
-
- /* Ensure there are no QTDs or URBs left. */
- kill_urbs_in_qh_list(hcd, qh_list);
-
- for (item = qh_list->next; item != qh_list; item = qh_list->next) {
- qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
- dwc_otg_hcd_qh_remove_and_free(hcd, qh);
- }
-}
-
-/**
- * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
- * stopped.
- */
-void dwc_otg_hcd_stop(struct usb_hcd *hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- hprt0_data_t hprt0 = { .d32=0 };
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
-
- /* Turn off all host-specific interrupts. */
- dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-
- /*
- * The root hub should be disconnected before this function is called.
- * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
- * and the QH lists (via ..._hcd_endpoint_disable).
- */
-
- /* Turn off the vbus power */
- DWC_PRINT("PortPower off\n");
- hprt0.b.prtpwr = 0;
- dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-}
-
-/** Returns the current frame number. */
-int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- hfnum_data_t hfnum;
-
- hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
- host_if->host_global_regs->hfnum);
-
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
-#endif
- return hfnum.b.frnum;
-}
-
-/**
- * Frees secondary storage associated with the dwc_otg_hcd structure contained
- * in the struct usb_hcd field.
- */
-void dwc_otg_hcd_free(struct usb_hcd *hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- int i;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
-
- del_timers(dwc_otg_hcd);
-
- /* Free memory for QH/QTD lists */
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
-
- /* Free memory for the host channels. */
- for (i = 0; i < MAX_EPS_CHANNELS; i++) {
- dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
- if (hc != NULL) {
- DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
- kfree(hc);
- }
- }
-
- if (dwc_otg_hcd->core_if->dma_enable) {
- if (dwc_otg_hcd->status_buf_dma) {
- dma_free_coherent(hcd->self.controller,
- DWC_OTG_HCD_STATUS_BUF_SIZE,
- dwc_otg_hcd->status_buf,
- dwc_otg_hcd->status_buf_dma);
- }
- } else if (dwc_otg_hcd->status_buf != NULL) {
- kfree(dwc_otg_hcd->status_buf);
- }
-}
-
-#ifdef DEBUG
-static void dump_urb_info(struct urb *urb, char* fn_name)
-{
- DWC_PRINT("%s, urb %p\n", fn_name, urb);
- DWC_PRINT(" Device address: %d\n", usb_pipedevice(urb->pipe));
- DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
- (usb_pipein(urb->pipe) ? "IN" : "OUT"));
- DWC_PRINT(" Endpoint type: %s\n",
- ({char *pipetype;
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL: pipetype = "CONTROL"; break;
- case PIPE_BULK: pipetype = "BULK"; break;
- case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
- case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
- default: pipetype = "UNKNOWN"; break;
- }; pipetype;}));
- DWC_PRINT(" Speed: %s\n",
- ({char *speed;
- switch (urb->dev->speed) {
- case USB_SPEED_HIGH: speed = "HIGH"; break;
- case USB_SPEED_FULL: speed = "FULL"; break;
- case USB_SPEED_LOW: speed = "LOW"; break;
- default: speed = "UNKNOWN"; break;
- }; speed;}));
- DWC_PRINT(" Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
- DWC_PRINT(" Data buffer length: %d\n", urb->transfer_buffer_length);
- DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
- urb->transfer_buffer, (void *)urb->transfer_dma);
- DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
- urb->setup_packet, (void *)urb->setup_dma);
- DWC_PRINT(" Interval: %d\n", urb->interval);
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- int i;
- for (i = 0; i < urb->number_of_packets; i++) {
- DWC_PRINT(" ISO Desc %d:\n", i);
- DWC_PRINT(" offset: %d, length %d\n",
- urb->iso_frame_desc[i].offset,
- urb->iso_frame_desc[i].length);
- }
- }
-}
-
-static void dump_channel_info(dwc_otg_hcd_t *hcd,
- dwc_otg_qh_t *qh)
-{
- if (qh->channel != NULL) {
- dwc_hc_t *hc = qh->channel;
- struct list_head *item;
- dwc_otg_qh_t *qh_item;
- int num_channels = hcd->core_if->core_params->host_channels;
- int i;
-
- dwc_otg_hc_regs_t *hc_regs;
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
- hctsiz_data_t hctsiz;
- uint32_t hcdma;
-
- hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
- hcdma = dwc_read_reg32(&hc_regs->hcdma);
-
- DWC_PRINT(" Assigned to channel %p:\n", hc);
- DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
- DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
- DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
- hc->dev_addr, hc->ep_num, hc->ep_is_in);
- DWC_PRINT(" ep_type: %d\n", hc->ep_type);
- DWC_PRINT(" max_packet: %d\n", hc->max_packet);
- DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
- DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
- DWC_PRINT(" halt_status: %d\n", hc->halt_status);
- DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
- DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
- DWC_PRINT(" qh: %p\n", hc->qh);
- DWC_PRINT(" NP inactive sched:\n");
- list_for_each(item, &hcd->non_periodic_sched_inactive) {
- qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
- DWC_PRINT(" %p\n", qh_item);
- }
- DWC_PRINT(" NP active sched:\n");
- list_for_each(item, &hcd->non_periodic_sched_active) {
- qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
- DWC_PRINT(" %p\n", qh_item);
- }
- DWC_PRINT(" Channels: \n");
- for (i = 0; i < num_channels; i++) {
- dwc_hc_t *hc = hcd->hc_ptr_array[i];
- DWC_PRINT(" %2d: %p\n", i, hc);
- }
- }
-}
-#endif
-
-/** Starts processing a USB transfer request specified by a USB Request Block
- * (URB). mem_flags indicates the type of memory allocation to use while
- * processing this URB. */
-int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
- struct urb *urb,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- int mem_flags
-#else
- gfp_t mem_flags
-#endif
- )
-{
- int retval = 0;
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- dwc_otg_qtd_t *qtd;
-
-#ifdef DEBUG
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue");
- }
-#endif
- if (!dwc_otg_hcd->flags.b.port_connect_status) {
- /* No longer connected. */
- return -ENODEV;
- }
-
- qtd = dwc_otg_hcd_qtd_create(urb);
- if (qtd == NULL) {
- DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
- return -ENOMEM;
- }
-
- retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd);
- if (retval < 0) {
- DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
- "Error status %d\n", retval);
- dwc_otg_hcd_qtd_free(qtd);
- }
-
- return retval;
-}
-
-/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
- * success. */
-int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
- struct urb *urb,
- int status)
-{
- unsigned long flags;
- dwc_otg_hcd_t *dwc_otg_hcd;
- dwc_otg_qtd_t *urb_qtd;
- dwc_otg_qh_t *qh;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-#endif
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
-
- dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-
- SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-
- urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv;
- qh = (dwc_otg_qh_t *)ep->hcpriv;
-
-#ifdef DEBUG
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue");
- if (urb_qtd == qh->qtd_in_process) {
- dump_channel_info(dwc_otg_hcd, qh);
- }
- }
-#endif
-
- if (urb_qtd == qh->qtd_in_process) {
- /* The QTD is in process (it has been assigned to a channel). */
-
- if (dwc_otg_hcd->flags.b.port_connect_status) {
- /*
- * If still connected (i.e. in host mode), halt the
- * channel so it can be used for other transfers. If
- * no longer connected, the host registers can't be
- * written to halt the channel since the core is in
- * device mode.
- */
- dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
- DWC_OTG_HC_XFER_URB_DEQUEUE);
- }
- }
-
- /*
- * Free the QTD and clean up the associated QH. Leave the QH in the
- * schedule if it has any remaining QTDs.
- */
- dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd);
- if (urb_qtd == qh->qtd_in_process) {
- dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
- qh->channel = NULL;
- qh->qtd_in_process = NULL;
- } else if (list_empty(&qh->qtd_list)) {
- dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
- }
-
- SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-
- urb->hcpriv = NULL;
-
- /* Higher layer software sets URB status. */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- usb_hcd_giveback_urb(hcd, urb, status);
-#else
- usb_hcd_giveback_urb(hcd, urb, NULL);
-#endif
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- DWC_PRINT("Called usb_hcd_giveback_urb()\n");
- DWC_PRINT(" urb->status = %d\n", urb->status);
- }
-
- return 0;
-}
-
-/** Frees resources in the DWC_otg controller related to a given endpoint. Also
- * clears state in the HCD related to the endpoint. Any URBs for the endpoint
- * must already be dequeued. */
-void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- dwc_otg_qh_t *qh;
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- unsigned long flags;
- int retry = 0;
-#endif
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
- "endpoint=%d\n", ep->desc.bEndpointAddress,
- dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-rescan:
- SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
- qh = (dwc_otg_qh_t *)(ep->hcpriv);
- if (!qh)
- goto done;
-
- /** Check that the QTD list is really empty */
- if (!list_empty(&qh->qtd_list)) {
- if (retry++ < 250) {
- SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
- schedule_timeout_uninterruptible(1);
- goto rescan;
- }
-
- DWC_WARN("DWC OTG HCD EP DISABLE:"
- " QTD List for this endpoint is not empty\n");
- }
-
- dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
- ep->hcpriv = NULL;
-done:
- SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-
-#else // LINUX_VERSION_CODE
-
- qh = (dwc_otg_qh_t *)(ep->hcpriv);
- if (qh != NULL) {
-#ifdef DEBUG
- /** Check that the QTD list is really empty */
- if (!list_empty(&qh->qtd_list)) {
- DWC_WARN("DWC OTG HCD EP DISABLE:"
- " QTD List for this endpoint is not empty\n");
- }
-#endif
- dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
- ep->hcpriv = NULL;
- }
-#endif // LINUX_VERSION_CODE
-}
-
-/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
- * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
- * interrupt.
- *
- * This function is called by the USB core when an interrupt occurs */
-irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
- , struct pt_regs *regs
-#endif
- )
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
-}
-
-/** Creates Status Change bitmap for the root hub and root port. The bitmap is
- * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
- * is the status change indicator for the single root port. Returns 1 if either
- * change indicator is 1, otherwise returns 0. */
-int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-
- buf[0] = 0;
- buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
- dwc_otg_hcd->flags.b.port_reset_change ||
- dwc_otg_hcd->flags.b.port_enable_change ||
- dwc_otg_hcd->flags.b.port_suspend_change ||
- dwc_otg_hcd->flags.b.port_over_current_change) << 1;
-
-#ifdef DEBUG
- if (buf[0]) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
- " Root port status changed\n");
- DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
- dwc_otg_hcd->flags.b.port_connect_status_change);
- DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
- dwc_otg_hcd->flags.b.port_reset_change);
- DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
- dwc_otg_hcd->flags.b.port_enable_change);
- DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
- dwc_otg_hcd->flags.b.port_suspend_change);
- DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
- dwc_otg_hcd->flags.b.port_over_current_change);
- }
-#endif
- return (buf[0] != 0);
-}
-
-#ifdef DWC_HS_ELECT_TST
-/*
- * Quick and dirty hack to implement the HS Electrical Test
- * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
- *
- * This code was copied from our userspace app "hset". It sends a
- * Get Device Descriptor control sequence in two parts, first the
- * Setup packet by itself, followed some time later by the In and
- * Ack packets. Rather than trying to figure out how to add this
- * functionality to the normal driver code, we just hijack the
- * hardware, using these two function to drive the hardware
- * directly.
- */
-
-dwc_otg_core_global_regs_t *global_regs;
-dwc_otg_host_global_regs_t *hc_global_regs;
-dwc_otg_hc_regs_t *hc_regs;
-uint32_t *data_fifo;
-
-static void do_setup(void)
-{
- gintsts_data_t gintsts;
- hctsiz_data_t hctsiz;
- hcchar_data_t hcchar;
- haint_data_t haint;
- hcint_data_t hcint;
-
- /* Enable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-
- /* Enable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /*
- * Send Setup packet (Get Device Descriptor)
- */
-
- /* Make sure channel is disabled */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
-// hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- mdelay(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 8;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
- hcchar.b.epdir = 0;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- /* Fill FIFO with Setup data for Get Device Descriptor */
- data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
- dwc_write_reg32(data_fifo++, 0x01000680);
- dwc_write_reg32(data_fifo++, 0x00080000);
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Disable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-
- /* Disable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-}
-
-static void do_in_ack(void)
-{
- gintsts_data_t gintsts;
- hctsiz_data_t hctsiz;
- hcchar_data_t hcchar;
- haint_data_t haint;
- hcint_data_t hcint;
- host_grxsts_data_t grxsts;
-
- /* Enable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-
- /* Enable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /*
- * Receive Control In packet
- */
-
- /* Make sure channel is disabled */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- mdelay(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 8;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
- hcchar.b.epdir = 1;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for receive status queue interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.rxstsqlvl == 0);
-
- //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read RXSTS */
- grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
- //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
- /* Clear RXSTSQLVL in GINTSTS */
- gintsts.d32 = 0;
- gintsts.b.rxstsqlvl = 1;
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- switch (grxsts.b.pktsts) {
- case DWC_GRXSTS_PKTSTS_IN:
- /* Read the data into the host buffer */
- if (grxsts.b.bcnt > 0) {
- int i;
- int word_count = (grxsts.b.bcnt + 3) / 4;
-
- data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-
- for (i = 0; i < word_count; i++) {
- (void)dwc_read_reg32(data_fifo++);
- }
- }
-
- //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
- break;
-
- default:
- //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
- break;
- }
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for receive status queue interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.rxstsqlvl == 0);
-
- //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read RXSTS */
- grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
- //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
- /* Clear RXSTSQLVL in GINTSTS */
- gintsts.d32 = 0;
- gintsts.b.rxstsqlvl = 1;
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- switch (grxsts.b.pktsts) {
- case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
- break;
-
- default:
- //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
- break;
- }
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
-// usleep(100000);
-// mdelay(100);
- mdelay(1);
-
- /*
- * Send handshake packet
- */
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Make sure channel is disabled */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- mdelay(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 0;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
- hcchar.b.epdir = 0;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
- /* Disable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-
- /* Disable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-}
-#endif /* DWC_HS_ELECT_TST */
-
-/** Handles hub class-specific requests. */
-int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
- u16 typeReq,
- u16 wValue,
- u16 wIndex,
- char *buf,
- u16 wLength)
-{
- int retval = 0;
-
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if;
- struct usb_hub_descriptor *desc;
- hprt0_data_t hprt0 = {.d32 = 0};
-
- uint32_t port_status;
-
- switch (typeReq) {
- case ClearHubFeature:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearHubFeature 0x%x\n", wValue);
- switch (wValue) {
- case C_HUB_LOCAL_POWER:
- case C_HUB_OVER_CURRENT:
- /* Nothing required here */
- break;
- default:
- retval = -EINVAL;
- DWC_ERROR("DWC OTG HCD - "
- "ClearHubFeature request %xh unknown\n", wValue);
- }
- break;
- case ClearPortFeature:
- if (!wIndex || wIndex > 1)
- goto error;
-
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtena = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_SUSPEND:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtres = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- /* Clear Resume bit */
- mdelay(100);
- hprt0.b.prtres = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_POWER:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_POWER\n");
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtpwr = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_INDICATOR:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
- /* Port inidicator not supported */
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- /* Clears drivers internal connect status change
- * flag */
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
- dwc_otg_hcd->flags.b.port_connect_status_change = 0;
- break;
- case USB_PORT_FEAT_C_RESET:
- /* Clears the driver's internal Port Reset Change
- * flag */
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
- dwc_otg_hcd->flags.b.port_reset_change = 0;
- break;
- case USB_PORT_FEAT_C_ENABLE:
- /* Clears the driver's internal Port
- * Enable/Disable Change flag */
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
- dwc_otg_hcd->flags.b.port_enable_change = 0;
- break;
- case USB_PORT_FEAT_C_SUSPEND:
- /* Clears the driver's internal Port Suspend
- * Change flag, which is set when resume signaling on
- * the host port is complete */
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
- dwc_otg_hcd->flags.b.port_suspend_change = 0;
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
- dwc_otg_hcd->flags.b.port_over_current_change = 0;
- break;
- default:
- retval = -EINVAL;
- DWC_ERROR("DWC OTG HCD - "
- "ClearPortFeature request %xh "
- "unknown or unsupported\n", wValue);
- }
- break;
- case GetHubDescriptor:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "GetHubDescriptor\n");
- desc = (struct usb_hub_descriptor *)buf;
- desc->bDescLength = 9;
- desc->bDescriptorType = 0x29;
- desc->bNbrPorts = 1;
- desc->wHubCharacteristics = 0x08;
- desc->bPwrOn2PwrGood = 1;
- desc->bHubContrCurrent = 0;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
- desc->u.hs.DeviceRemovable[0] = 0;
- desc->u.hs.DeviceRemovable[1] = 0xff;
-#endif
- break;
- case GetHubStatus:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "GetHubStatus\n");
- memset(buf, 0, 4);
- break;
- case GetPortStatus:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "GetPortStatus\n");
-
- if (!wIndex || wIndex > 1)
- goto error;
-
- port_status = 0;
-
- if (dwc_otg_hcd->flags.b.port_connect_status_change)
- port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-
- if (dwc_otg_hcd->flags.b.port_enable_change)
- port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-
- if (dwc_otg_hcd->flags.b.port_suspend_change)
- port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
-
- if (dwc_otg_hcd->flags.b.port_reset_change)
- port_status |= (1 << USB_PORT_FEAT_C_RESET);
-
- if (dwc_otg_hcd->flags.b.port_over_current_change) {
- DWC_ERROR("Device Not Supported\n");
- port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
- }
-
- if (!dwc_otg_hcd->flags.b.port_connect_status) {
- /*
- * The port is disconnected, which means the core is
- * either in device mode or it soon will be. Just
- * return 0's for the remainder of the port status
- * since the port register can't be read if the core
- * is in device mode.
- */
- *((__le32 *) buf) = cpu_to_le32(port_status);
- break;
- }
-
- hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
- DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
-
- if (hprt0.b.prtconnsts)
- port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-
- if (hprt0.b.prtena)
- port_status |= (1 << USB_PORT_FEAT_ENABLE);
-
- if (hprt0.b.prtsusp)
- port_status |= (1 << USB_PORT_FEAT_SUSPEND);
-
- if (hprt0.b.prtovrcurract)
- port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-
- if (hprt0.b.prtrst)
- port_status |= (1 << USB_PORT_FEAT_RESET);
-
- if (hprt0.b.prtpwr)
- port_status |= (1 << USB_PORT_FEAT_POWER);
-
- if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
- port_status |= USB_PORT_STAT_HIGH_SPEED;
- else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
- port_status |= USB_PORT_STAT_LOW_SPEED;
-
- if (hprt0.b.prttstctl)
- port_status |= (1 << USB_PORT_FEAT_TEST);
-
- /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-
- *((__le32 *) buf) = cpu_to_le32(port_status);
-
- break;
- case SetHubFeature:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetHubFeature\n");
- /* No HUB features supported */
- break;
- case SetPortFeature:
- if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1))
- goto error;
-
- if (!dwc_otg_hcd->flags.b.port_connect_status) {
- /*
- * The port is disconnected, which means the core is
- * either in device mode or it soon will be. Just
- * return without doing anything since the port
- * register can't be written if the core is in device
- * mode.
- */
- break;
- }
-
- switch (wValue) {
- case USB_PORT_FEAT_SUSPEND:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
- if (hcd->self.otg_port == wIndex &&
- hcd->self.b_hnp_enable) {
- gotgctl_data_t gotgctl = {.d32=0};
- gotgctl.b.hstsethnpen = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
- 0, gotgctl.d32);
- core_if->op_state = A_SUSPEND;
- }
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtsusp = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- //DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32);
- /* Suspend the Phy Clock */
- {
- pcgcctl_data_t pcgcctl = {.d32=0};
- pcgcctl.b.stoppclk = 1;
- dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
- }
-
- /* For HNP the bus must be suspended for at least 200ms. */
- if (hcd->self.b_hnp_enable) {
- mdelay(200);
- //DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state);
- }
- break;
- case USB_PORT_FEAT_POWER:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_POWER\n");
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtpwr = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_RESET:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_RESET\n");
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- /* When B-Host the Port reset bit is set in
- * the Start HCD Callback function, so that
- * the reset is started within 1ms of the HNP
- * success interrupt. */
- if (!hcd->self.is_b_host) {
- hprt0.b.prtrst = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- }
- /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
- MDELAY(60);
- hprt0.b.prtrst = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
-
-#ifdef DWC_HS_ELECT_TST
- case USB_PORT_FEAT_TEST:
- {
- uint32_t t;
- gintmsk_data_t gintmsk;
-
- t = (wIndex >> 8); /* MSB wIndex USB */
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
- warn("USB_PORT_FEAT_TEST %d\n", t);
- if (t < 6) {
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prttstctl = t;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- } else {
- /* Setup global vars with reg addresses (quick and
- * dirty hack, should be cleaned up)
- */
- global_regs = core_if->core_global_regs;
- hc_global_regs = core_if->host_if->host_global_regs;
- hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
- data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-
- if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
- /* Save current interrupt mask */
- gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Drive suspend on the root port */
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtsusp = 1;
- hprt0.b.prtres = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Drive resume on the root port */
- hprt0.d32 = dwc_otg_read_hprt0(core_if);
- hprt0.b.prtsusp = 0;
- hprt0.b.prtres = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- mdelay(100);
-
- /* Clear the resume bit */
- hprt0.b.prtres = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
- /* Restore interrupts */
- dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
- } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
- /* Save current interrupt mask */
- gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Send the Setup packet */
- do_setup();
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Restore interrupts */
- dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
- } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
- /* Save current interrupt mask */
- gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* Send the Setup packet */
- do_setup();
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Send the In and Ack packets */
- do_in_ack();
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Restore interrupts */
- dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
- }
- }
- break;
- }
-#endif /* DWC_HS_ELECT_TST */
-
- case USB_PORT_FEAT_INDICATOR:
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
- /* Not supported */
- break;
- default:
- retval = -EINVAL;
- DWC_ERROR("DWC OTG HCD - "
- "SetPortFeature request %xh "
- "unknown or unsupported\n", wValue);
- break;
- }
- break;
- default:
- error:
- retval = -EINVAL;
- DWC_WARN("DWC OTG HCD - "
- "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
- typeReq, wIndex, wValue);
- break;
- }
-
- return retval;
-}
-
-/**
- * Assigns transactions from a QTD to a free host channel and initializes the
- * host channel to perform the transactions. The host channel is removed from
- * the free list.
- *
- * @param hcd The HCD state structure.
- * @param qh Transactions from the first QTD for this QH are selected and
- * assigned to a free host channel.
- */
-static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- dwc_hc_t *hc;
- dwc_otg_qtd_t *qtd;
- struct urb *urb;
-
- DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh);
-
- hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
-
- /* Remove the host channel from the free list. */
- list_del_init(&hc->hc_list_entry);
-
- qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
- urb = qtd->urb;
- qh->channel = hc;
- qh->qtd_in_process = qtd;
-
- /*
- * Use usb_pipedevice to determine device address. This address is
- * 0 before the SET_ADDRESS command and the correct address afterward.
- */
- hc->dev_addr = usb_pipedevice(urb->pipe);
- hc->ep_num = usb_pipeendpoint(urb->pipe);
-
- if (urb->dev->speed == USB_SPEED_LOW) {
- hc->speed = DWC_OTG_EP_SPEED_LOW;
- } else if (urb->dev->speed == USB_SPEED_FULL) {
- hc->speed = DWC_OTG_EP_SPEED_FULL;
- } else {
- hc->speed = DWC_OTG_EP_SPEED_HIGH;
- }
-
- hc->max_packet = dwc_max_packet(qh->maxp);
-
- hc->xfer_started = 0;
- hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
- hc->error_state = (qtd->error_count > 0);
- hc->halt_on_queue = 0;
- hc->halt_pending = 0;
- hc->requests = 0;
-
- /*
- * The following values may be modified in the transfer type section
- * below. The xfer_len value may be reduced when the transfer is
- * started to accommodate the max widths of the XferSize and PktCnt
- * fields in the HCTSIZn register.
- */
- hc->do_ping = qh->ping_state;
- hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
- hc->data_pid_start = qh->data_toggle;
- hc->multi_count = 1;
-
- if (hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length;
- } else {
- hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
- }
- hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
- hc->xfer_count = 0;
-
- /*
- * Set the split attributes
- */
- hc->do_split = 0;
- if (qh->do_split) {
- hc->do_split = 1;
- hc->xact_pos = qtd->isoc_split_pos;
- hc->complete_split = qtd->complete_split;
- hc->hub_addr = urb->dev->tt->hub->devnum;
- hc->port_addr = urb->dev->ttport;
- }
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
- switch (qtd->control_phase) {
- case DWC_OTG_CONTROL_SETUP:
- DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
- hc->do_ping = 0;
- hc->ep_is_in = 0;
- hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
- if (hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)urb->setup_dma;
- } else {
- hc->xfer_buff = (uint8_t *)urb->setup_packet;
- }
- hc->xfer_len = 8;
- break;
- case DWC_OTG_CONTROL_DATA:
- DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
- hc->data_pid_start = qtd->data_toggle;
- break;
- case DWC_OTG_CONTROL_STATUS:
- /*
- * Direction is opposite of data direction or IN if no
- * data.
- */
- DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
- if (urb->transfer_buffer_length == 0) {
- hc->ep_is_in = 1;
- } else {
- hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
- }
- if (hc->ep_is_in) {
- hc->do_ping = 0;
- }
- hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
- hc->xfer_len = 0;
- if (hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)hcd->status_buf_dma;
- } else {
- hc->xfer_buff = (uint8_t *)hcd->status_buf;
- }
- break;
- }
- break;
- case PIPE_BULK:
- hc->ep_type = DWC_OTG_EP_TYPE_BULK;
- break;
- case PIPE_INTERRUPT:
- hc->ep_type = DWC_OTG_EP_TYPE_INTR;
- break;
- case PIPE_ISOCHRONOUS:
- {
- struct usb_iso_packet_descriptor *frame_desc;
- frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
- hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
- if (hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)urb->transfer_dma;
- } else {
- hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
- }
- hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
- hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
-
- if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
- if (hc->xfer_len <= 188) {
- hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
- }
- else {
- hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
- }
- }
- }
- break;
- }
-
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * This value may be modified when the transfer is started to
- * reflect the actual transfer length.
- */
- hc->multi_count = dwc_hb_mult(qh->maxp);
- }
-
- dwc_otg_hc_init(hcd->core_if, hc);
- hc->qh = qh;
-}
-
-/**
- * This function selects transactions from the HCD transfer schedule and
- * assigns them to available host channels. It is called from HCD interrupt
- * handler functions.
- *
- * @param hcd The HCD state structure.
- *
- * @return The types of new transactions that were assigned to host channels.
- */
-dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd)
-{
- struct list_head *qh_ptr;
- dwc_otg_qh_t *qh;
- int num_channels;
- dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
-
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCD, " Select Transactions\n");
-#endif
-
- /* Process entries in the periodic ready list. */
- qh_ptr = hcd->periodic_sched_ready.next;
- while (qh_ptr != &hcd->periodic_sched_ready &&
- !list_empty(&hcd->free_hc_list)) {
-
- qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
- assign_and_init_hc(hcd, qh);
-
- /*
- * Move the QH from the periodic ready schedule to the
- * periodic assigned schedule.
- */
- qh_ptr = qh_ptr->next;
- list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned);
-
- ret_val = DWC_OTG_TRANSACTION_PERIODIC;
- }
-
- /*
- * Process entries in the inactive portion of the non-periodic
- * schedule. Some free host channels may not be used if they are
- * reserved for periodic transfers.
- */
- qh_ptr = hcd->non_periodic_sched_inactive.next;
- num_channels = hcd->core_if->core_params->host_channels;
- while (qh_ptr != &hcd->non_periodic_sched_inactive &&
- (hcd->non_periodic_channels <
- num_channels - hcd->periodic_channels) &&
- !list_empty(&hcd->free_hc_list)) {
-
- qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
- assign_and_init_hc(hcd, qh);
-
- /*
- * Move the QH from the non-periodic inactive schedule to the
- * non-periodic active schedule.
- */
- qh_ptr = qh_ptr->next;
- list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active);
-
- if (ret_val == DWC_OTG_TRANSACTION_NONE) {
- ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
- } else {
- ret_val = DWC_OTG_TRANSACTION_ALL;
- }
-
- hcd->non_periodic_channels++;
- }
-
- return ret_val;
-}
-
-/**
- * Attempts to queue a single transaction request for a host channel
- * associated with either a periodic or non-periodic transfer. This function
- * assumes that there is space available in the appropriate request queue. For
- * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
- * is available in the appropriate Tx FIFO.
- *
- * @param hcd The HCD state structure.
- * @param hc Host channel descriptor associated with either a periodic or
- * non-periodic transfer.
- * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
- * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
- * transfers.
- *
- * @return 1 if a request is queued and more requests may be needed to
- * complete the transfer, 0 if no more requests are required for this
- * transfer, -1 if there is insufficient space in the Tx FIFO.
- */
-static int queue_transaction(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- uint16_t fifo_dwords_avail)
-{
- int retval;
-
- if (hcd->core_if->dma_enable) {
- if (!hc->xfer_started) {
- dwc_otg_hc_start_transfer(hcd->core_if, hc);
- hc->qh->ping_state = 0;
- }
- retval = 0;
- } else if (hc->halt_pending) {
- /* Don't queue a request if the channel has been halted. */
- retval = 0;
- } else if (hc->halt_on_queue) {
- dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
- retval = 0;
- } else if (hc->do_ping) {
- if (!hc->xfer_started) {
- dwc_otg_hc_start_transfer(hcd->core_if, hc);
- }
- retval = 0;
- } else if (!hc->ep_is_in ||
- hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
- if ((fifo_dwords_avail * 4) >= hc->max_packet) {
- if (!hc->xfer_started) {
- dwc_otg_hc_start_transfer(hcd->core_if, hc);
- retval = 1;
- } else {
- retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
- }
- } else {
- retval = -1;
- }
- } else {
- if (!hc->xfer_started) {
- dwc_otg_hc_start_transfer(hcd->core_if, hc);
- retval = 1;
- } else {
- retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
- }
- }
-
- return retval;
-}
-
-/**
- * Processes active non-periodic channels and queues transactions for these
- * channels to the DWC_otg controller. After queueing transactions, the NP Tx
- * FIFO Empty interrupt is enabled if there are more transactions to queue as
- * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
- * FIFO Empty interrupt is disabled.
- */
-static void process_non_periodic_channels(dwc_otg_hcd_t *hcd)
-{
- gnptxsts_data_t tx_status;
- struct list_head *orig_qh_ptr;
- dwc_otg_qh_t *qh;
- int status;
- int no_queue_space = 0;
- int no_fifo_space = 0;
- int more_to_do = 0;
-
- dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs;
-
- DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n",
- tx_status.b.nptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
- tx_status.b.nptxfspcavail);
-#endif
- /*
- * Keep track of the starting point. Skip over the start-of-list
- * entry.
- */
- if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
- hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
- }
- orig_qh_ptr = hcd->non_periodic_qh_ptr;
-
- /*
- * Process once through the active list or until no more space is
- * available in the request queue or the Tx FIFO.
- */
- do {
- tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
- no_queue_space = 1;
- break;
- }
-
- qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
- status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail);
-
- if (status > 0) {
- more_to_do = 1;
- } else if (status < 0) {
- no_fifo_space = 1;
- break;
- }
-
- /* Advance to next QH, skipping start-of-list entry. */
- hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
- if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
- hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
- }
-
- } while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
-
- if (!hcd->core_if->dma_enable) {
- gintmsk_data_t intr_mask = {.d32 = 0};
- intr_mask.b.nptxfempty = 1;
-
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n",
- tx_status.b.nptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n",
- tx_status.b.nptxfspcavail);
-#endif
- if (more_to_do || no_queue_space || no_fifo_space) {
- /*
- * May need to queue more transactions as the request
- * queue or Tx FIFO empties. Enable the non-periodic
- * Tx FIFO empty interrupt. (Always use the half-empty
- * level to ensure that new requests are loaded as
- * soon as possible.)
- */
- dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
- } else {
- /*
- * Disable the Tx FIFO empty interrupt since there are
- * no more transactions that need to be queued right
- * now. This function is called from interrupt
- * handlers to queue more transactions as transfer
- * states change.
- */
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
- }
- }
-}
-
-/**
- * Processes periodic channels for the next frame and queues transactions for
- * these channels to the DWC_otg controller. After queueing transactions, the
- * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
- * to queue as Periodic Tx FIFO or request queue space becomes available.
- * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
- */
-static void process_periodic_channels(dwc_otg_hcd_t *hcd)
-{
- hptxsts_data_t tx_status;
- struct list_head *qh_ptr;
- dwc_otg_qh_t *qh;
- int status;
- int no_queue_space = 0;
- int no_fifo_space = 0;
-
- dwc_otg_host_global_regs_t *host_regs;
- host_regs = hcd->core_if->host_if->host_global_regs;
-
- DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
- DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n",
- tx_status.b.ptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
- tx_status.b.ptxfspcavail);
-#endif
-
- qh_ptr = hcd->periodic_sched_assigned.next;
- while (qh_ptr != &hcd->periodic_sched_assigned) {
- tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
- if (tx_status.b.ptxqspcavail == 0) {
- no_queue_space = 1;
- break;
- }
-
- qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-
- /*
- * Set a flag if we're queuing high-bandwidth in slave mode.
- * The flag prevents any halts to get into the request queue in
- * the middle of multiple high-bandwidth packets getting queued.
- */
- if (!hcd->core_if->dma_enable &&
- qh->channel->multi_count > 1)
- {
- hcd->core_if->queuing_high_bandwidth = 1;
- }
-
- status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail);
- if (status < 0) {
- no_fifo_space = 1;
- break;
- }
-
- /*
- * In Slave mode, stay on the current transfer until there is
- * nothing more to do or the high-bandwidth request count is
- * reached. In DMA mode, only need to queue one request. The
- * controller automatically handles multiple packets for
- * high-bandwidth transfers.
- */
- if (hcd->core_if->dma_enable || status == 0 ||
- qh->channel->requests == qh->channel->multi_count) {
- qh_ptr = qh_ptr->next;
- /*
- * Move the QH from the periodic assigned schedule to
- * the periodic queued schedule.
- */
- list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued);
-
- /* done queuing high bandwidth */
- hcd->core_if->queuing_high_bandwidth = 0;
- }
- }
-
- if (!hcd->core_if->dma_enable) {
- dwc_otg_core_global_regs_t *global_regs;
- gintmsk_data_t intr_mask = {.d32 = 0};
-
- global_regs = hcd->core_if->core_global_regs;
- intr_mask.b.ptxfempty = 1;
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
- DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n",
- tx_status.b.ptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n",
- tx_status.b.ptxfspcavail);
-#endif
- if (!list_empty(&hcd->periodic_sched_assigned) ||
- no_queue_space || no_fifo_space) {
- /*
- * May need to queue more transactions as the request
- * queue or Tx FIFO empties. Enable the periodic Tx
- * FIFO empty interrupt. (Always use the half-empty
- * level to ensure that new requests are loaded as
- * soon as possible.)
- */
- dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
- } else {
- /*
- * Disable the Tx FIFO empty interrupt since there are
- * no more transactions that need to be queued right
- * now. This function is called from interrupt
- * handlers to queue more transactions as transfer
- * states change.
- */
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
- }
- }
-}
-
-/**
- * This function processes the currently active host channels and queues
- * transactions for these channels to the DWC_otg controller. It is called
- * from HCD interrupt handler functions.
- *
- * @param hcd The HCD state structure.
- * @param tr_type The type(s) of transactions to queue (non-periodic,
- * periodic, or both).
- */
-void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
- dwc_otg_transaction_type_e tr_type)
-{
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
-#endif
- /* Process host channels associated with periodic transfers. */
- if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
- tr_type == DWC_OTG_TRANSACTION_ALL) &&
- !list_empty(&hcd->periodic_sched_assigned)) {
-
- process_periodic_channels(hcd);
- }
-
- /* Process host channels associated with non-periodic transfers. */
- if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
- tr_type == DWC_OTG_TRANSACTION_ALL) {
- if (!list_empty(&hcd->non_periodic_sched_active)) {
- process_non_periodic_channels(hcd);
- } else {
- /*
- * Ensure NP Tx FIFO empty interrupt is disabled when
- * there are no non-periodic transfers to process.
- */
- gintmsk_data_t gintmsk = {.d32 = 0};
- gintmsk.b.nptxfempty = 1;
- dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk,
- gintmsk.d32, 0);
- }
- }
-}
-
-/**
- * Sets the final status of an URB and returns it to the device driver. Any
- * required cleanup of the URB is performed.
- */
-void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status)
-{
-#ifdef DEBUG
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
- __func__, urb, usb_pipedevice(urb->pipe),
- usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "IN" : "OUT", status);
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- int i;
- for (i = 0; i < urb->number_of_packets; i++) {
- DWC_PRINT(" ISO Desc %d status: %d\n",
- i, urb->iso_frame_desc[i].status);
- }
- }
- }
-#endif
-
- urb->status = status;
- urb->hcpriv = NULL;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
-#else
- usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, NULL);
-#endif
-}
-
-/*
- * Returns the Queue Head for an URB.
- */
-dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb)
-{
- struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
- return (dwc_otg_qh_t *)ep->hcpriv;
-}
-
-#ifdef DEBUG
-void dwc_print_setup_data(uint8_t *setup)
-{
- int i;
- if (CHK_DEBUG_LEVEL(DBG_HCD)){
- DWC_PRINT("Setup Data = MSB ");
- for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]);
- DWC_PRINT("\n");
- DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device");
- DWC_PRINT(" bmRequestType Type = ");
- switch ((setup[0] & 0x60) >> 5) {
- case 0: DWC_PRINT("Standard\n"); break;
- case 1: DWC_PRINT("Class\n"); break;
- case 2: DWC_PRINT("Vendor\n"); break;
- case 3: DWC_PRINT("Reserved\n"); break;
- }
- DWC_PRINT(" bmRequestType Recipient = ");
- switch (setup[0] & 0x1f) {
- case 0: DWC_PRINT("Device\n"); break;
- case 1: DWC_PRINT("Interface\n"); break;
- case 2: DWC_PRINT("Endpoint\n"); break;
- case 3: DWC_PRINT("Other\n"); break;
- default: DWC_PRINT("Reserved\n"); break;
- }
- DWC_PRINT(" bRequest = 0x%0x\n", setup[1]);
- DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
- DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
- DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
- }
-}
-#endif
-
-void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) {
-#if defined(DEBUG) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- DWC_PRINT("Frame remaining at SOF:\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->frrem_samples, hcd->frrem_accum,
- (hcd->frrem_samples > 0) ?
- hcd->frrem_accum/hcd->frrem_samples : 0);
-
- DWC_PRINT("\n");
- DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->core_if->hfnum_7_samples, hcd->core_if->hfnum_7_frrem_accum,
- (hcd->core_if->hfnum_7_samples > 0) ?
- hcd->core_if->hfnum_7_frrem_accum/hcd->core_if->hfnum_7_samples : 0);
- DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->core_if->hfnum_0_samples, hcd->core_if->hfnum_0_frrem_accum,
- (hcd->core_if->hfnum_0_samples > 0) ?
- hcd->core_if->hfnum_0_frrem_accum/hcd->core_if->hfnum_0_samples : 0);
- DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->core_if->hfnum_other_samples, hcd->core_if->hfnum_other_frrem_accum,
- (hcd->core_if->hfnum_other_samples > 0) ?
- hcd->core_if->hfnum_other_frrem_accum/hcd->core_if->hfnum_other_samples : 0);
-
- DWC_PRINT("\n");
- DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
- (hcd->hfnum_7_samples_a > 0) ?
- hcd->hfnum_7_frrem_accum_a/hcd->hfnum_7_samples_a : 0);
- DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
- (hcd->hfnum_0_samples_a > 0) ?
- hcd->hfnum_0_frrem_accum_a/hcd->hfnum_0_samples_a : 0);
- DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
- (hcd->hfnum_other_samples_a > 0) ?
- hcd->hfnum_other_frrem_accum_a/hcd->hfnum_other_samples_a : 0);
-
- DWC_PRINT("\n");
- DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
- (hcd->hfnum_7_samples_b > 0) ?
- hcd->hfnum_7_frrem_accum_b/hcd->hfnum_7_samples_b : 0);
- DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
- (hcd->hfnum_0_samples_b > 0) ?
- hcd->hfnum_0_frrem_accum_b/hcd->hfnum_0_samples_b : 0);
- DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
- (hcd->hfnum_other_samples_b > 0) ?
- hcd->hfnum_other_frrem_accum_b/hcd->hfnum_other_samples_b : 0);
-#endif
-}
-
-void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd)
-{
-#ifdef DEBUG
- int num_channels;
- int i;
- gnptxsts_data_t np_tx_status;
- hptxsts_data_t p_tx_status;
-
- num_channels = hcd->core_if->core_params->host_channels;
- DWC_PRINT("\n");
- DWC_PRINT("************************************************************\n");
- DWC_PRINT("HCD State:\n");
- DWC_PRINT(" Num channels: %d\n", num_channels);
- for (i = 0; i < num_channels; i++) {
- dwc_hc_t *hc = hcd->hc_ptr_array[i];
- DWC_PRINT(" Channel %d:\n", i);
- DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
- hc->dev_addr, hc->ep_num, hc->ep_is_in);
- DWC_PRINT(" speed: %d\n", hc->speed);
- DWC_PRINT(" ep_type: %d\n", hc->ep_type);
- DWC_PRINT(" max_packet: %d\n", hc->max_packet);
- DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
- DWC_PRINT(" multi_count: %d\n", hc->multi_count);
- DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
- DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
- DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
- DWC_PRINT(" xfer_count: %d\n", hc->xfer_count);
- DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue);
- DWC_PRINT(" halt_pending: %d\n", hc->halt_pending);
- DWC_PRINT(" halt_status: %d\n", hc->halt_status);
- DWC_PRINT(" do_split: %d\n", hc->do_split);
- DWC_PRINT(" complete_split: %d\n", hc->complete_split);
- DWC_PRINT(" hub_addr: %d\n", hc->hub_addr);
- DWC_PRINT(" port_addr: %d\n", hc->port_addr);
- DWC_PRINT(" xact_pos: %d\n", hc->xact_pos);
- DWC_PRINT(" requests: %d\n", hc->requests);
- DWC_PRINT(" qh: %p\n", hc->qh);
- if (hc->xfer_started) {
- hfnum_data_t hfnum;
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
- hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
- hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar);
- hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz);
- hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint);
- hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk);
- DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32);
- DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32);
- DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32);
- DWC_PRINT(" hcint: 0x%08x\n", hcint.d32);
- DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32);
- }
- if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) {
- dwc_otg_qtd_t *qtd;
- struct urb *urb;
- qtd = hc->qh->qtd_in_process;
- urb = qtd->urb;
- DWC_PRINT(" URB Info:\n");
- DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb);
- if (urb) {
- DWC_PRINT(" Dev: %d, EP: %d %s\n",
- usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "IN" : "OUT");
- DWC_PRINT(" Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
- DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer);
- DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma);
- DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length);
- DWC_PRINT(" actual_length: %d\n", urb->actual_length);
- }
- }
- }
- DWC_PRINT(" non_periodic_channels: %d\n", hcd->non_periodic_channels);
- DWC_PRINT(" periodic_channels: %d\n", hcd->periodic_channels);
- DWC_PRINT(" periodic_usecs: %d\n", hcd->periodic_usecs);
- np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts);
- DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
- DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
- p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts);
- DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
- DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
- dwc_otg_hcd_dump_frrem(hcd);
- dwc_otg_dump_global_registers(hcd->core_if);
- dwc_otg_dump_host_registers(hcd->core_if);
- DWC_PRINT("************************************************************\n");
- DWC_PRINT("\n");
-#endif
-}
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.h
deleted file mode 100644
index ee41dc96f9..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.h
+++ /dev/null
@@ -1,668 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
- * $Revision: 1.3 $
- * $Date: 2008-12-15 06:51:32 $
- * $Change: 1064918 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-#ifndef __DWC_HCD_H__
-#define __DWC_HCD_H__
-
-#include <linux/list.h>
-#include <linux/usb.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)
-#include <linux/usb/hcd.h>
-#else
-#include <../drivers/usb/core/hcd.h>
-#endif
-
-struct dwc_otg_device;
-
-#include "dwc_otg_cil.h"
-
-/**
- * @file
- *
- * This file contains the structures, constants, and interfaces for
- * the Host Contoller Driver (HCD).
- *
- * The Host Controller Driver (HCD) is responsible for translating requests
- * from the USB Driver into the appropriate actions on the DWC_otg controller.
- * It isolates the USBD from the specifics of the controller by providing an
- * API to the USBD.
- */
-
-/**
- * Phases for control transfers.
- */
-typedef enum dwc_otg_control_phase {
- DWC_OTG_CONTROL_SETUP,
- DWC_OTG_CONTROL_DATA,
- DWC_OTG_CONTROL_STATUS
-} dwc_otg_control_phase_e;
-
-/** Transaction types. */
-typedef enum dwc_otg_transaction_type {
- DWC_OTG_TRANSACTION_NONE,
- DWC_OTG_TRANSACTION_PERIODIC,
- DWC_OTG_TRANSACTION_NON_PERIODIC,
- DWC_OTG_TRANSACTION_ALL
-} dwc_otg_transaction_type_e;
-
-/**
- * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
- * interrupt, or isochronous transfer. A single QTD is created for each URB
- * (of one of these types) submitted to the HCD. The transfer associated with
- * a QTD may require one or multiple transactions.
- *
- * A QTD is linked to a Queue Head, which is entered in either the
- * non-periodic or periodic schedule for execution. When a QTD is chosen for
- * execution, some or all of its transactions may be executed. After
- * execution, the state of the QTD is updated. The QTD may be retired if all
- * its transactions are complete or if an error occurred. Otherwise, it
- * remains in the schedule so more transactions can be executed later.
- */
-typedef struct dwc_otg_qtd {
- /**
- * Determines the PID of the next data packet for the data phase of
- * control transfers. Ignored for other transfer types.<br>
- * One of the following values:
- * - DWC_OTG_HC_PID_DATA0
- * - DWC_OTG_HC_PID_DATA1
- */
- uint8_t data_toggle;
-
- /** Current phase for control transfers (Setup, Data, or Status). */
- dwc_otg_control_phase_e control_phase;
-
- /** Keep track of the current split type
- * for FS/LS endpoints on a HS Hub */
- uint8_t complete_split;
-
- /** How many bytes transferred during SSPLIT OUT */
- uint32_t ssplit_out_xfer_count;
-
- /**
- * Holds the number of bus errors that have occurred for a transaction
- * within this transfer.
- */
- uint8_t error_count;
-
- /**
- * Index of the next frame descriptor for an isochronous transfer. A
- * frame descriptor describes the buffer position and length of the
- * data to be transferred in the next scheduled (micro)frame of an
- * isochronous transfer. It also holds status for that transaction.
- * The frame index starts at 0.
- */
- int isoc_frame_index;
-
- /** Position of the ISOC split on full/low speed */
- uint8_t isoc_split_pos;
-
- /** Position of the ISOC split in the buffer for the current frame */
- uint16_t isoc_split_offset;
-
- /** URB for this transfer */
- struct urb *urb;
-
- /** This list of QTDs */
- struct list_head qtd_list_entry;
-
-} dwc_otg_qtd_t;
-
-/**
- * A Queue Head (QH) holds the static characteristics of an endpoint and
- * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
- * be entered in either the non-periodic or periodic schedule.
- */
-typedef struct dwc_otg_qh {
- /**
- * Endpoint type.
- * One of the following values:
- * - USB_ENDPOINT_XFER_CONTROL
- * - USB_ENDPOINT_XFER_ISOC
- * - USB_ENDPOINT_XFER_BULK
- * - USB_ENDPOINT_XFER_INT
- */
- uint8_t ep_type;
- uint8_t ep_is_in;
-
- /** wMaxPacketSize Field of Endpoint Descriptor. */
- uint16_t maxp;
-
- /**
- * Determines the PID of the next data packet for non-control
- * transfers. Ignored for control transfers.<br>
- * One of the following values:
- * - DWC_OTG_HC_PID_DATA0
- * - DWC_OTG_HC_PID_DATA1
- */
- uint8_t data_toggle;
-
- /** Ping state if 1. */
- uint8_t ping_state;
-
- /**
- * List of QTDs for this QH.
- */
- struct list_head qtd_list;
-
- /** Host channel currently processing transfers for this QH. */
- dwc_hc_t *channel;
-
- /** QTD currently assigned to a host channel for this QH. */
- dwc_otg_qtd_t *qtd_in_process;
-
- /** Full/low speed endpoint on high-speed hub requires split. */
- uint8_t do_split;
-
- /** @name Periodic schedule information */
- /** @{ */
-
- /** Bandwidth in microseconds per (micro)frame. */
- uint8_t usecs;
-
- /** Interval between transfers in (micro)frames. */
- uint16_t interval;
-
- /**
- * (micro)frame to initialize a periodic transfer. The transfer
- * executes in the following (micro)frame.
- */
- uint16_t sched_frame;
-
- /** (micro)frame at which last start split was initialized. */
- uint16_t start_split_frame;
-
- /** @} */
-
- /** Entry for QH in either the periodic or non-periodic schedule. */
- struct list_head qh_list_entry;
-
- /* For non-dword aligned buffer support */
- uint8_t *dw_align_buf;
- dma_addr_t dw_align_buf_dma;
-} dwc_otg_qh_t;
-
-/**
- * This structure holds the state of the HCD, including the non-periodic and
- * periodic schedules.
- */
-typedef struct dwc_otg_hcd {
- /** The DWC otg device pointer */
- struct dwc_otg_device *otg_dev;
-
- /** DWC OTG Core Interface Layer */
- dwc_otg_core_if_t *core_if;
-
- /** Internal DWC HCD Flags */
- volatile union dwc_otg_hcd_internal_flags {
- uint32_t d32;
- struct {
- unsigned port_connect_status_change : 1;
- unsigned port_connect_status : 1;
- unsigned port_reset_change : 1;
- unsigned port_enable_change : 1;
- unsigned port_suspend_change : 1;
- unsigned port_over_current_change : 1;
- unsigned reserved : 27;
- } b;
- } flags;
-
- /**
- * Inactive items in the non-periodic schedule. This is a list of
- * Queue Heads. Transfers associated with these Queue Heads are not
- * currently assigned to a host channel.
- */
- struct list_head non_periodic_sched_inactive;
-
- /**
- * Active items in the non-periodic schedule. This is a list of
- * Queue Heads. Transfers associated with these Queue Heads are
- * currently assigned to a host channel.
- */
- struct list_head non_periodic_sched_active;
-
- /**
- * Pointer to the next Queue Head to process in the active
- * non-periodic schedule.
- */
- struct list_head *non_periodic_qh_ptr;
-
- /**
- * Inactive items in the periodic schedule. This is a list of QHs for
- * periodic transfers that are _not_ scheduled for the next frame.
- * Each QH in the list has an interval counter that determines when it
- * needs to be scheduled for execution. This scheduling mechanism
- * allows only a simple calculation for periodic bandwidth used (i.e.
- * must assume that all periodic transfers may need to execute in the
- * same frame). However, it greatly simplifies scheduling and should
- * be sufficient for the vast majority of OTG hosts, which need to
- * connect to a small number of peripherals at one time.
- *
- * Items move from this list to periodic_sched_ready when the QH
- * interval counter is 0 at SOF.
- */
- struct list_head periodic_sched_inactive;
-
- /**
- * List of periodic QHs that are ready for execution in the next
- * frame, but have not yet been assigned to host channels.
- *
- * Items move from this list to periodic_sched_assigned as host
- * channels become available during the current frame.
- */
- struct list_head periodic_sched_ready;
-
- /**
- * List of periodic QHs to be executed in the next frame that are
- * assigned to host channels.
- *
- * Items move from this list to periodic_sched_queued as the
- * transactions for the QH are queued to the DWC_otg controller.
- */
- struct list_head periodic_sched_assigned;
-
- /**
- * List of periodic QHs that have been queued for execution.
- *
- * Items move from this list to either periodic_sched_inactive or
- * periodic_sched_ready when the channel associated with the transfer
- * is released. If the interval for the QH is 1, the item moves to
- * periodic_sched_ready because it must be rescheduled for the next
- * frame. Otherwise, the item moves to periodic_sched_inactive.
- */
- struct list_head periodic_sched_queued;
-
- /**
- * Total bandwidth claimed so far for periodic transfers. This value
- * is in microseconds per (micro)frame. The assumption is that all
- * periodic transfers may occur in the same (micro)frame.
- */
- uint16_t periodic_usecs;
-
- /**
- * Frame number read from the core at SOF. The value ranges from 0 to
- * DWC_HFNUM_MAX_FRNUM.
- */
- uint16_t frame_number;
-
- /**
- * Free host channels in the controller. This is a list of
- * dwc_hc_t items.
- */
- struct list_head free_hc_list;
-
- /**
- * Number of host channels assigned to periodic transfers. Currently
- * assuming that there is a dedicated host channel for each periodic
- * transaction and at least one host channel available for
- * non-periodic transactions.
- */
- int periodic_channels;
-
- /**
- * Number of host channels assigned to non-periodic transfers.
- */
- int non_periodic_channels;
-
- /**
- * Array of pointers to the host channel descriptors. Allows accessing
- * a host channel descriptor given the host channel number. This is
- * useful in interrupt handlers.
- */
- dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS];
-
- /**
- * Buffer to use for any data received during the status phase of a
- * control transfer. Normally no data is transferred during the status
- * phase. This buffer is used as a bit bucket.
- */
- uint8_t *status_buf;
-
- /**
- * DMA address for status_buf.
- */
- dma_addr_t status_buf_dma;
-#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
-
- /**
- * Structure to allow starting the HCD in a non-interrupt context
- * during an OTG role change.
- */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- struct work_struct start_work;
-#else
- struct delayed_work start_work;
-#endif
-
- /**
- * Connection timer. An OTG host must display a message if the device
- * does not connect. Started when the VBus power is turned on via
- * sysfs attribute "buspower".
- */
- struct timer_list conn_timer;
-
- /* Tasket to do a reset */
- struct tasklet_struct *reset_tasklet;
-
- /* */
- spinlock_t lock;
-
-#ifdef DEBUG
- uint32_t frrem_samples;
- uint64_t frrem_accum;
-
- uint32_t hfnum_7_samples_a;
- uint64_t hfnum_7_frrem_accum_a;
- uint32_t hfnum_0_samples_a;
- uint64_t hfnum_0_frrem_accum_a;
- uint32_t hfnum_other_samples_a;
- uint64_t hfnum_other_frrem_accum_a;
-
- uint32_t hfnum_7_samples_b;
- uint64_t hfnum_7_frrem_accum_b;
- uint32_t hfnum_0_samples_b;
- uint64_t hfnum_0_frrem_accum_b;
- uint32_t hfnum_other_samples_b;
- uint64_t hfnum_other_frrem_accum_b;
-#endif
-} dwc_otg_hcd_t;
-
-/** Gets the dwc_otg_hcd from a struct usb_hcd */
-static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
-{
- return (dwc_otg_hcd_t *)(hcd->hcd_priv);
-}
-
-/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
-static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
-}
-
-/** @name HCD Create/Destroy Functions */
-/** @{ */
-extern int dwc_otg_hcd_init(struct device *dev);
-extern void dwc_otg_hcd_remove(struct device *dev);
-/** @} */
-
-/** @name Linux HC Driver API Functions */
-/** @{ */
-
-extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
-extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
-extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
-extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
-extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
- struct urb *urb,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- int mem_flags
-#else
- gfp_t mem_flags
-#endif
- );
-extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-#endif
- struct urb *urb, int status);
-extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep);
-extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- , struct pt_regs *regs
-#endif
- );
-extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
- char *buf);
-extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
- u16 typeReq,
- u16 wValue,
- u16 wIndex,
- char *buf,
- u16 wLength);
-
-/** @} */
-
-/** @name Transaction Execution Functions */
-/** @{ */
-extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd);
-extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
- dwc_otg_transaction_type_e tr_type);
-extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb,
- int status);
-/** @} */
-
-/** @name Interrupt Handler Functions */
-/** @{ */
-extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num);
-extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-/** @} */
-
-
-/** @name Schedule Queue Functions */
-/** @{ */
-
-/* Implemented in dwc_otg_hcd_queue.c */
-extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb);
-extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb);
-extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit);
-
-/** Remove and free a QH */
-static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd,
- dwc_otg_qh_t *qh)
-{
- dwc_otg_hcd_qh_remove(hcd, qh);
- dwc_otg_hcd_qh_free(hcd, qh);
-}
-
-/** Allocates memory for a QH structure.
- * @return Returns the memory allocate or NULL on error. */
-static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void)
-{
- return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL);
-}
-
-extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb);
-extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb);
-extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
-
-/** Allocates memory for a QTD structure.
- * @return Returns the memory allocate or NULL on error. */
-static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void)
-{
- return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL);
-}
-
-/** Frees the memory for a QTD structure. QTD should already be removed from
- * list.
- * @param[in] qtd QTD to free.*/
-static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd)
-{
- kfree(qtd);
-}
-
-/** Removes a QTD from list.
- * @param[in] hcd HCD instance.
- * @param[in] qtd QTD to remove from list. */
-static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
-{
- unsigned long flags;
- SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
- list_del(&qtd->qtd_list_entry);
- SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-}
-
-/** Remove and free a QTD */
-static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
-{
- dwc_otg_hcd_qtd_remove(hcd, qtd);
- dwc_otg_hcd_qtd_free(qtd);
-}
-
-/** @} */
-
-
-/** @name Internal Functions */
-/** @{ */
-dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb);
-void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd);
-void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd);
-/** @} */
-
-/** Gets the usb_host_endpoint associated with an URB. */
-static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
-{
- struct usb_device *dev = urb->dev;
- int ep_num = usb_pipeendpoint(urb->pipe);
-
- if (usb_pipein(urb->pipe))
- return dev->ep_in[ep_num];
- else
- return dev->ep_out[ep_num];
-}
-
-/**
- * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
- * qualified with its direction (possible 32 endpoints per device).
- */
-#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
- ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-
-/** Gets the QH that contains the list_head */
-#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
-
-/** Gets the QTD that contains the list_head */
-#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
-
-/** Check if QH is non-periodic */
-#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
- (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
-
-/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-
-/** Packet size for any kind of endpoint descriptor */
-#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-
-/**
- * Returns true if _frame1 is less than or equal to _frame2. The comparison is
- * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
- * frame number when the max frame number is reached.
- */
-static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
-{
- return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
- (DWC_HFNUM_MAX_FRNUM >> 1);
-}
-
-/**
- * Returns true if _frame1 is greater than _frame2. The comparison is done
- * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
- * number when the max frame number is reached.
- */
-static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
-{
- return (frame1 != frame2) &&
- (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
- (DWC_HFNUM_MAX_FRNUM >> 1));
-}
-
-/**
- * Increments _frame by the amount specified by _inc. The addition is done
- * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
- */
-static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
-{
- return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
-}
-
-static inline uint16_t dwc_full_frame_num(uint16_t frame)
-{
- return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
-}
-
-static inline uint16_t dwc_micro_frame_num(uint16_t frame)
-{
- return frame & 0x7;
-}
-
-#ifdef DEBUG
-/**
- * Macro to sample the remaining PHY clocks left in the current frame. This
- * may be used during debugging to determine the average time it takes to
- * execute sections of code. There are two possible sample points, "a" and
- * "b", so the _letter argument must be one of these values.
- *
- * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
- * example, "cat /sys/devices/lm0/hcd_frrem".
- */
-#define dwc_sample_frrem(_hcd, _qh, _letter) \
-{ \
- hfnum_data_t hfnum; \
- dwc_otg_qtd_t *qtd; \
- qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
- if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
- hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
- switch (hfnum.b.frnum & 0x7) { \
- case 7: \
- _hcd->hfnum_7_samples_##_letter++; \
- _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
- break; \
- case 0: \
- _hcd->hfnum_0_samples_##_letter++; \
- _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
- break; \
- default: \
- _hcd->hfnum_other_samples_##_letter++; \
- _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
- break; \
- } \
- } \
-}
-#else
-#define dwc_sample_frrem(_hcd, _qh, _letter)
-#endif
-#endif
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
deleted file mode 100644
index bdf2db99f3..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+++ /dev/null
@@ -1,1873 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
- * $Revision: 1.6.2.1 $
- * $Date: 2009-04-22 03:48:22 $
- * $Change: 1117667 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-#include <linux/version.h>
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_hcd.h"
-#include "dwc_otg_regs.h"
-
-/** @file
- * This file contains the implementation of the HCD Interrupt handlers.
- */
-
-/** This function handles interrupts for the HCD. */
-int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- int retval = 0;
-
- dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
- gintsts_data_t gintsts;
-#ifdef DEBUG
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-#endif
-
- /* Check if HOST Mode */
- if (dwc_otg_is_host_mode(core_if)) {
- gintsts.d32 = dwc_otg_read_core_intr(core_if);
- if (!gintsts.d32) {
- return 0;
- }
-
-#ifdef DEBUG
- /* Don't print debug message in the interrupt handler on SOF */
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- DWC_DEBUGPL(DBG_HCD, "\n");
-#endif
-
-#ifdef DEBUG
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
-#endif
- if (gintsts.b.usbreset) {
- DWC_PRINT("Usb Reset In Host Mode\n");
- }
-
-
- if (gintsts.b.sofintr) {
- retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
- }
- if (gintsts.b.rxstsqlvl) {
- retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd);
- }
- if (gintsts.b.nptxfempty) {
- retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd);
- }
- if (gintsts.b.i2cintr) {
- /** @todo Implement i2cintr handler. */
- }
- if (gintsts.b.portintr) {
- retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
- }
- if (gintsts.b.hcintr) {
- retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
- }
- if (gintsts.b.ptxfempty) {
- retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd);
- }
-#ifdef DEBUG
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
- dwc_read_reg32(&global_regs->gintsts));
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
- dwc_read_reg32(&global_regs->gintmsk));
- }
-#endif
-
-#ifdef DEBUG
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- DWC_DEBUGPL(DBG_HCD, "\n");
-#endif
-
- }
-
- S3C2410X_CLEAR_EINTPEND();
-
- return retval;
-}
-
-#ifdef DWC_TRACK_MISSED_SOFS
-#warning Compiling code to track missed SOFs
-#define FRAME_NUM_ARRAY_SIZE 1000
-/**
- * This function is for debug only.
- */
-static inline void track_missed_sofs(uint16_t curr_frame_number)
-{
- static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
- static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
- static int frame_num_idx = 0;
- static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
- static int dumped_frame_num_array = 0;
-
- if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
- if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) {
- frame_num_array[frame_num_idx] = curr_frame_number;
- last_frame_num_array[frame_num_idx++] = last_frame_num;
- }
- } else if (!dumped_frame_num_array) {
- int i;
- printk(KERN_EMERG USB_DWC "Frame Last Frame\n");
- printk(KERN_EMERG USB_DWC "----- ----------\n");
- for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
- printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n",
- frame_num_array[i], last_frame_num_array[i]);
- }
- dumped_frame_num_array = 1;
- }
- last_frame_num = curr_frame_number;
-}
-#endif
-
-/**
- * Handles the start-of-frame interrupt in host mode. Non-periodic
- * transactions may be queued to the DWC_otg controller for the current
- * (micro)frame. Periodic transactions may be queued to the controller for the
- * next (micro)frame.
- */
-int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd)
-{
- hfnum_data_t hfnum;
- struct list_head *qh_entry;
- dwc_otg_qh_t *qh;
- dwc_otg_transaction_type_e tr_type;
- gintsts_data_t gintsts = {.d32 = 0};
-
- hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
-
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
-#endif
- hcd->frame_number = hfnum.b.frnum;
-
-#ifdef DEBUG
- hcd->frrem_accum += hfnum.b.frrem;
- hcd->frrem_samples++;
-#endif
-
-#ifdef DWC_TRACK_MISSED_SOFS
- track_missed_sofs(hcd->frame_number);
-#endif
-
- /* Determine whether any periodic QHs should be executed. */
- qh_entry = hcd->periodic_sched_inactive.next;
- while (qh_entry != &hcd->periodic_sched_inactive) {
- qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
- qh_entry = qh_entry->next;
- if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
- /*
- * Move QH to the ready list to be executed next
- * (micro)frame.
- */
- list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready);
- }
- }
-
- tr_type = dwc_otg_hcd_select_transactions(hcd);
- if (tr_type != DWC_OTG_TRANSACTION_NONE) {
- dwc_otg_hcd_queue_transactions(hcd, tr_type);
- }
-
- /* Clear interrupt */
- gintsts.b.sofintr = 1;
- dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
- * least one packet in the Rx FIFO. The packets are moved from the FIFO to
- * memory if the DWC_otg controller is operating in Slave mode. */
-int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- host_grxsts_data_t grxsts;
- dwc_hc_t *hc = NULL;
-
- DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
-
- grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
-
- hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
-
- /* Packet Status */
- DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
- DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
- DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
- DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
-
- switch (grxsts.b.pktsts) {
- case DWC_GRXSTS_PKTSTS_IN:
- /* Read the data into the host buffer. */
- if (grxsts.b.bcnt > 0) {
- dwc_otg_read_packet(dwc_otg_hcd->core_if,
- hc->xfer_buff,
- grxsts.b.bcnt);
-
- /* Update the HC fields for the next packet received. */
- hc->xfer_count += grxsts.b.bcnt;
- hc->xfer_buff += grxsts.b.bcnt;
- }
-
- case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
- case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
- case DWC_GRXSTS_PKTSTS_CH_HALTED:
- /* Handled in interrupt, just ignore data */
- break;
- default:
- DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
- break;
- }
-
- return 1;
-}
-
-/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
- * data packets may be written to the FIFO for OUT transfers. More requests
- * may be written to the non-periodic request queue for IN transfers. This
- * interrupt is enabled only in Slave mode. */
-int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
- dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
- DWC_OTG_TRANSACTION_NON_PERIODIC);
- return 1;
-}
-
-/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
- * packets may be written to the FIFO for OUT transfers. More requests may be
- * written to the periodic request queue for IN transfers. This interrupt is
- * enabled only in Slave mode. */
-int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
- dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
- DWC_OTG_TRANSACTION_PERIODIC);
- return 1;
-}
-
-/** There are multiple conditions that can cause a port interrupt. This function
- * determines which interrupt conditions have occurred and handles them
- * appropriately. */
-int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- int retval = 0;
- hprt0_data_t hprt0;
- hprt0_data_t hprt0_modify;
-
- hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
- hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
-
- /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
- * GINTSTS */
-
- hprt0_modify.b.prtena = 0;
- hprt0_modify.b.prtconndet = 0;
- hprt0_modify.b.prtenchng = 0;
- hprt0_modify.b.prtovrcurrchng = 0;
-
- /* Port Connect Detected
- * Set flag and clear if detected */
- if (hprt0.b.prtconndet) {
- DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
- "Port Connect Detected--\n", hprt0.d32);
- dwc_otg_hcd->flags.b.port_connect_status_change = 1;
- dwc_otg_hcd->flags.b.port_connect_status = 1;
- hprt0_modify.b.prtconndet = 1;
-
- /* B-Device has connected, Delete the connection timer. */
- del_timer( &dwc_otg_hcd->conn_timer );
-
- /* The Hub driver asserts a reset when it sees port connect
- * status change flag */
- retval |= 1;
- }
-
- /* Port Enable Changed
- * Clear if detected - Set internal flag if disabled */
- if (hprt0.b.prtenchng) {
- DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
- "Port Enable Changed--\n", hprt0.d32);
- hprt0_modify.b.prtenchng = 1;
- if (hprt0.b.prtena == 1) {
- int do_reset = 0;
- dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params;
- dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs;
- dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if;
-
- /* Check if we need to adjust the PHY clock speed for
- * low power and adjust it */
- if (params->host_support_fs_ls_low_power) {
- gusbcfg_data_t usbcfg;
-
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-
- if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ||
- hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
- /*
- * Low power
- */
- hcfg_data_t hcfg;
- if (usbcfg.b.phylpwrclksel == 0) {
- /* Set PHY low power clock select for FS/LS devices */
- usbcfg.b.phylpwrclksel = 1;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- do_reset = 1;
- }
-
- hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-
- if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED &&
- params->host_ls_low_power_phy_clk ==
- DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
- /* 6 MHZ */
- DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
- if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
- hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
- dwc_write_reg32(&host_if->host_global_regs->hcfg,
- hcfg.d32);
- do_reset = 1;
- }
- } else {
- /* 48 MHZ */
- DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
- if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
- hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
- dwc_write_reg32(&host_if->host_global_regs->hcfg,
- hcfg.d32);
- do_reset = 1;
- }
- }
- } else {
- /*
- * Not low power
- */
- if (usbcfg.b.phylpwrclksel == 1) {
- usbcfg.b.phylpwrclksel = 0;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- do_reset = 1;
- }
- }
-
- if (do_reset) {
- tasklet_schedule(dwc_otg_hcd->reset_tasklet);
- }
- }
-
- if (!do_reset) {
- /* Port has been enabled set the reset change flag */
- dwc_otg_hcd->flags.b.port_reset_change = 1;
- }
- } else {
- dwc_otg_hcd->flags.b.port_enable_change = 1;
- }
- retval |= 1;
- }
-
- /** Overcurrent Change Interrupt */
- if (hprt0.b.prtovrcurrchng) {
- DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
- "Port Overcurrent Changed--\n", hprt0.d32);
- dwc_otg_hcd->flags.b.port_over_current_change = 1;
- hprt0_modify.b.prtovrcurrchng = 1;
- retval |= 1;
- }
-
- /* Clear Port Interrupts */
- dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-
- return retval;
-}
-
-/** This interrupt indicates that one or more host channels has a pending
- * interrupt. There are multiple conditions that can cause each host channel
- * interrupt. This function determines which conditions have occurred for each
- * host channel interrupt and handles them appropriately. */
-int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- int i;
- int retval = 0;
- haint_data_t haint;
-
- /* Clear appropriate bits in HCINTn to clear the interrupt bit in
- * GINTSTS */
-
- haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
-
- for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
- if (haint.b2.chint & (1 << i)) {
- retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
- }
- }
-
- return retval;
-}
-
-/* Macro used to clear one channel interrupt */
-#define clear_hc_int(_hc_regs_, _intr_) \
-do { \
- hcint_data_t hcint_clear = {.d32 = 0}; \
- hcint_clear.b._intr_ = 1; \
- dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
-} while (0)
-
-/*
- * Macro used to disable one channel interrupt. Channel interrupts are
- * disabled when the channel is halted or released by the interrupt handler.
- * There is no need to handle further interrupts of that type until the
- * channel is re-assigned. In fact, subsequent handling may cause crashes
- * because the channel structures are cleaned up when the channel is released.
- */
-#define disable_hc_int(_hc_regs_, _intr_) \
-do { \
- hcintmsk_data_t hcintmsk = {.d32 = 0}; \
- hcintmsk.b._intr_ = 1; \
- dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
-} while (0)
-
-/**
- * Gets the actual length of a transfer after the transfer halts. _halt_status
- * holds the reason for the halt.
- *
- * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
- * *short_read is set to 1 upon return if less than the requested
- * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
- * return. short_read may also be NULL on entry, in which case it remains
- * unchanged.
- */
-static uint32_t get_actual_xfer_length(dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd,
- dwc_otg_halt_status_e halt_status,
- int *short_read)
-{
- hctsiz_data_t hctsiz;
- uint32_t length;
-
- if (short_read != NULL) {
- *short_read = 0;
- }
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-
- if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
- if (hc->ep_is_in) {
- length = hc->xfer_len - hctsiz.b.xfersize;
- if (short_read != NULL) {
- *short_read = (hctsiz.b.xfersize != 0);
- }
- } else if (hc->qh->do_split) {
- length = qtd->ssplit_out_xfer_count;
- } else {
- length = hc->xfer_len;
- }
- } else {
- /*
- * Must use the hctsiz.pktcnt field to determine how much data
- * has been transferred. This field reflects the number of
- * packets that have been transferred via the USB. This is
- * always an integral number of packets if the transfer was
- * halted before its normal completion. (Can't use the
- * hctsiz.xfersize field because that reflects the number of
- * bytes transferred via the AHB, not the USB).
- */
- length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
- }
-
- return length;
-}
-
-/**
- * Updates the state of the URB after a Transfer Complete interrupt on the
- * host channel. Updates the actual_length field of the URB based on the
- * number of bytes transferred via the host channel. Sets the URB status
- * if the data transfer is finished.
- *
- * @return 1 if the data transfer specified by the URB is completely finished,
- * 0 otherwise.
- */
-static int update_urb_state_xfer_comp(dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- struct urb *urb,
- dwc_otg_qtd_t *qtd)
-{
- int xfer_done = 0;
- int short_read = 0;
- int overflow_read=0;
- uint32_t len = 0;
- int max_packet;
-
- len = get_actual_xfer_length(hc, hc_regs, qtd,
- DWC_OTG_HC_XFER_COMPLETE,
- &short_read);
-
- /* Data overflow case: by Steven */
- if (len > urb->transfer_buffer_length) {
- len = urb->transfer_buffer_length;
- overflow_read = 1;
- }
-
- /* non DWORD-aligned buffer case handling. */
- if (((uint32_t)hc->xfer_buff & 0x3) && len && hc->qh->dw_align_buf && hc->ep_is_in) {
- memcpy(urb->transfer_buffer + urb->actual_length, hc->qh->dw_align_buf, len);
- }
- urb->actual_length +=len;
-
- max_packet = usb_maxpacket(urb->dev, urb->pipe, !usb_pipein(urb->pipe));
- if((len) && usb_pipebulk(urb->pipe) &&
- (urb->transfer_flags & URB_ZERO_PACKET) &&
- (urb->actual_length == urb->transfer_buffer_length) &&
- (!(urb->transfer_buffer_length % max_packet))) {
- } else if (short_read || urb->actual_length == urb->transfer_buffer_length) {
- xfer_done = 1;
- if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) {
- urb->status = -EREMOTEIO;
- } else if (overflow_read) {
- urb->status = -EOVERFLOW;
- } else {
- urb->status = 0;
- }
- }
-
-#ifdef DEBUG
- {
- hctsiz_data_t hctsiz;
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
- DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
- __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len);
- DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
- DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
- urb->transfer_buffer_length);
- DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
- DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
- short_read, xfer_done);
- }
-#endif
-
- return xfer_done;
-}
-
-/*
- * Save the starting data toggle for the next transfer. The data toggle is
- * saved in the QH for non-control transfers and it's saved in the QTD for
- * control transfers.
- */
-static void save_data_toggle(dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- hctsiz_data_t hctsiz;
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-
- if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
- dwc_otg_qh_t *qh = hc->qh;
- if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
- qh->data_toggle = DWC_OTG_HC_PID_DATA0;
- } else {
- qh->data_toggle = DWC_OTG_HC_PID_DATA1;
- }
- } else {
- if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
- qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
- } else {
- qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
- }
- }
-}
-
-/**
- * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
- * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
- * still linked to the QH, the QH is added to the end of the inactive
- * non-periodic schedule. For periodic QHs, removes the QH from the periodic
- * schedule if no more QTDs are linked to the QH.
- */
-static void deactivate_qh(dwc_otg_hcd_t *hcd,
- dwc_otg_qh_t *qh,
- int free_qtd)
-{
- int continue_split = 0;
- dwc_otg_qtd_t *qtd;
-
- DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
-
- qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-
- if (qtd->complete_split) {
- continue_split = 1;
- } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
- qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
- continue_split = 1;
- }
-
- if (free_qtd) {
- dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
- continue_split = 0;
- }
-
- qh->channel = NULL;
- qh->qtd_in_process = NULL;
- dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
-}
-
-/**
- * Updates the state of an Isochronous URB when the transfer is stopped for
- * any reason. The fields of the current entry in the frame descriptor array
- * are set based on the transfer state and the input _halt_status. Completes
- * the Isochronous URB if all the URB frames have been completed.
- *
- * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
- * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
- */
-static dwc_otg_halt_status_e
-update_isoc_urb_state(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd,
- dwc_otg_halt_status_e halt_status)
-{
- struct urb *urb = qtd->urb;
- dwc_otg_halt_status_e ret_val = halt_status;
- struct usb_iso_packet_descriptor *frame_desc;
-
- frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
- switch (halt_status) {
- case DWC_OTG_HC_XFER_COMPLETE:
- frame_desc->status = 0;
- frame_desc->actual_length =
- get_actual_xfer_length(hc, hc_regs, qtd,
- halt_status, NULL);
-
- /* non DWORD-aligned buffer case handling. */
- if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
- hc->qh->dw_align_buf && hc->ep_is_in) {
- memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
- hc->qh->dw_align_buf, frame_desc->actual_length);
-
- }
-
- break;
- case DWC_OTG_HC_XFER_FRAME_OVERRUN:
- printk("DWC_OTG_HC_XFER_FRAME_OVERRUN: %d\n", halt_status);
- urb->error_count++;
- if (hc->ep_is_in) {
- frame_desc->status = -ENOSR;
- } else {
- frame_desc->status = -ECOMM;
- }
- frame_desc->actual_length = 0;
- break;
- case DWC_OTG_HC_XFER_BABBLE_ERR:
- printk("DWC_OTG_HC_XFER_BABBLE_ERR: %d\n", halt_status);
- urb->error_count++;
- frame_desc->status = -EOVERFLOW;
- /* Don't need to update actual_length in this case. */
- break;
- case DWC_OTG_HC_XFER_XACT_ERR:
- printk("DWC_OTG_HC_XFER_XACT_ERR: %d\n", halt_status);
- urb->error_count++;
- frame_desc->status = -EPROTO;
- frame_desc->actual_length =
- get_actual_xfer_length(hc, hc_regs, qtd,
- halt_status, NULL);
-
- /* non DWORD-aligned buffer case handling. */
- if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
- hc->qh->dw_align_buf && hc->ep_is_in) {
- memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
- hc->qh->dw_align_buf, frame_desc->actual_length);
-
- }
- break;
- default:
-
- DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
- halt_status);
- BUG();
- break;
- }
-
- if (++qtd->isoc_frame_index == urb->number_of_packets) {
- /*
- * urb->status is not used for isoc transfers.
- * The individual frame_desc statuses are used instead.
- */
- dwc_otg_hcd_complete_urb(hcd, urb, 0);
- ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
- } else {
- ret_val = DWC_OTG_HC_XFER_COMPLETE;
- }
-
- return ret_val;
-}
-
-/**
- * Releases a host channel for use by other transfers. Attempts to select and
- * queue more transactions since at least one host channel is available.
- *
- * @param hcd The HCD state structure.
- * @param hc The host channel to release.
- * @param qtd The QTD associated with the host channel. This QTD may be freed
- * if the transfer is complete or an error has occurred.
- * @param halt_status Reason the channel is being released. This status
- * determines the actions taken by this function.
- */
-static void release_channel(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_qtd_t *qtd,
- dwc_otg_halt_status_e halt_status)
-{
- dwc_otg_transaction_type_e tr_type;
- int free_qtd;
-
- DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n",
- __func__, hc->hc_num, halt_status);
-
- switch (halt_status) {
- case DWC_OTG_HC_XFER_URB_COMPLETE:
- free_qtd = 1;
- break;
- case DWC_OTG_HC_XFER_AHB_ERR:
- case DWC_OTG_HC_XFER_STALL:
- case DWC_OTG_HC_XFER_BABBLE_ERR:
- free_qtd = 1;
- break;
- case DWC_OTG_HC_XFER_XACT_ERR:
- if (qtd->error_count >= 3) {
- DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n");
- free_qtd = 1;
- qtd->urb->status = -EPROTO;
- dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO);
- } else {
- free_qtd = 0;
- }
- break;
- case DWC_OTG_HC_XFER_URB_DEQUEUE:
- /*
- * The QTD has already been removed and the QH has been
- * deactivated. Don't want to do anything except release the
- * host channel and try to queue more transfers.
- */
- goto cleanup;
- case DWC_OTG_HC_XFER_NO_HALT_STATUS:
- DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
- free_qtd = 0;
- break;
- default:
- free_qtd = 0;
- break;
- }
-
- deactivate_qh(hcd, hc->qh, free_qtd);
-
- cleanup:
- /*
- * Release the host channel for use by other transfers. The cleanup
- * function clears the channel interrupt enables and conditions, so
- * there's no need to clear the Channel Halted interrupt separately.
- */
- dwc_otg_hc_cleanup(hcd->core_if, hc);
- list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list);
-
- switch (hc->ep_type) {
- case DWC_OTG_EP_TYPE_CONTROL:
- case DWC_OTG_EP_TYPE_BULK:
- hcd->non_periodic_channels--;
- break;
-
- default:
- /*
- * Don't release reservations for periodic channels here.
- * That's done when a periodic transfer is descheduled (i.e.
- * when the QH is removed from the periodic schedule).
- */
- break;
- }
-
- /* Try to queue more transfers now that there's a free channel. */
- tr_type = dwc_otg_hcd_select_transactions(hcd);
- if (tr_type != DWC_OTG_TRANSACTION_NONE) {
- dwc_otg_hcd_queue_transactions(hcd, tr_type);
- }
-}
-
-/**
- * Halts a host channel. If the channel cannot be halted immediately because
- * the request queue is full, this function ensures that the FIFO empty
- * interrupt for the appropriate queue is enabled so that the halt request can
- * be queued when there is space in the request queue.
- *
- * This function may also be called in DMA mode. In that case, the channel is
- * simply released since the core always halts the channel automatically in
- * DMA mode.
- */
-static void halt_channel(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_qtd_t *qtd,
- dwc_otg_halt_status_e halt_status)
-{
- if (hcd->core_if->dma_enable) {
- release_channel(hcd, hc, qtd, halt_status);
- return;
- }
-
- /* Slave mode processing... */
- dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
-
- if (hc->halt_on_queue) {
- gintmsk_data_t gintmsk = {.d32 = 0};
- dwc_otg_core_global_regs_t *global_regs;
- global_regs = hcd->core_if->core_global_regs;
-
- if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
- hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
- /*
- * Make sure the Non-periodic Tx FIFO empty interrupt
- * is enabled so that the non-periodic schedule will
- * be processed.
- */
- gintmsk.b.nptxfempty = 1;
- dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
- } else {
- /*
- * Move the QH from the periodic queued schedule to
- * the periodic assigned schedule. This allows the
- * halt to be queued when the periodic schedule is
- * processed.
- */
- list_move(&hc->qh->qh_list_entry,
- &hcd->periodic_sched_assigned);
-
- /*
- * Make sure the Periodic Tx FIFO Empty interrupt is
- * enabled so that the periodic schedule will be
- * processed.
- */
- gintmsk.b.ptxfempty = 1;
- dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
- }
- }
-}
-
-/**
- * Performs common cleanup for non-periodic transfers after a Transfer
- * Complete interrupt. This function should be called after any endpoint type
- * specific handling is finished to release the host channel.
- */
-static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd,
- dwc_otg_halt_status_e halt_status)
-{
- hcint_data_t hcint;
-
- qtd->error_count = 0;
-
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- if (hcint.b.nyet) {
- /*
- * Got a NYET on the last transaction of the transfer. This
- * means that the endpoint should be in the PING state at the
- * beginning of the next transfer.
- */
- hc->qh->ping_state = 1;
- clear_hc_int(hc_regs, nyet);
- }
-
- /*
- * Always halt and release the host channel to make it available for
- * more transfers. There may still be more phases for a control
- * transfer or more data packets for a bulk transfer at this point,
- * but the host channel is still halted. A channel will be reassigned
- * to the transfer when the non-periodic schedule is processed after
- * the channel is released. This allows transactions to be queued
- * properly via dwc_otg_hcd_queue_transactions, which also enables the
- * Tx FIFO Empty interrupt if necessary.
- */
- if (hc->ep_is_in) {
- /*
- * IN transfers in Slave mode require an explicit disable to
- * halt the channel. (In DMA mode, this call simply releases
- * the channel.)
- */
- halt_channel(hcd, hc, qtd, halt_status);
- } else {
- /*
- * The channel is automatically disabled by the core for OUT
- * transfers in Slave mode.
- */
- release_channel(hcd, hc, qtd, halt_status);
- }
-}
-
-/**
- * Performs common cleanup for periodic transfers after a Transfer Complete
- * interrupt. This function should be called after any endpoint type specific
- * handling is finished to release the host channel.
- */
-static void complete_periodic_xfer(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd,
- dwc_otg_halt_status_e halt_status)
-{
- hctsiz_data_t hctsiz;
- qtd->error_count = 0;
-
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
- if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
- /* Core halts channel in these cases. */
- release_channel(hcd, hc, qtd, halt_status);
- } else {
- /* Flush any outstanding requests from the Tx queue. */
- halt_channel(hcd, hc, qtd, halt_status);
- }
-}
-
-/**
- * Handles a host channel Transfer Complete interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- int urb_xfer_done;
- dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
- struct urb *urb = qtd->urb;
- int pipe_type = usb_pipetype(urb->pipe);
-
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Transfer Complete--\n", hc->hc_num);
-
- /*
- * Handle xfer complete on CSPLIT.
- */
- if (hc->qh->do_split) {
- qtd->complete_split = 0;
- }
-
- /* Update the QTD and URB states. */
- switch (pipe_type) {
- case PIPE_CONTROL:
- switch (qtd->control_phase) {
- case DWC_OTG_CONTROL_SETUP:
- if (urb->transfer_buffer_length > 0) {
- qtd->control_phase = DWC_OTG_CONTROL_DATA;
- } else {
- qtd->control_phase = DWC_OTG_CONTROL_STATUS;
- }
- DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
- halt_status = DWC_OTG_HC_XFER_COMPLETE;
- break;
- case DWC_OTG_CONTROL_DATA: {
- urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
- if (urb_xfer_done) {
- qtd->control_phase = DWC_OTG_CONTROL_STATUS;
- DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
- } else {
- save_data_toggle(hc, hc_regs, qtd);
- }
- halt_status = DWC_OTG_HC_XFER_COMPLETE;
- break;
- }
- case DWC_OTG_CONTROL_STATUS:
- DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
- if (urb->status == -EINPROGRESS) {
- urb->status = 0;
- }
- dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
- halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
- break;
- }
-
- complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
- break;
- case PIPE_BULK:
- DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
- urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
- if (urb_xfer_done) {
- dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
- halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
- } else {
- halt_status = DWC_OTG_HC_XFER_COMPLETE;
- }
-
- save_data_toggle(hc, hc_regs, qtd);
- complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
- break;
- case PIPE_INTERRUPT:
- DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
- update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-
- /*
- * Interrupt URB is done on the first transfer complete
- * interrupt.
- */
- dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
- save_data_toggle(hc, hc_regs, qtd);
- complete_periodic_xfer(hcd, hc, hc_regs, qtd,
- DWC_OTG_HC_XFER_URB_COMPLETE);
- break;
- case PIPE_ISOCHRONOUS:
- DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
- if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
- halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
- DWC_OTG_HC_XFER_COMPLETE);
- }
- complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
- break;
- }
-
- disable_hc_int(hc_regs, xfercompl);
-
- return 1;
-}
-
-/**
- * Handles a host channel STALL interrupt. This handler may be called in
- * either DMA mode or Slave mode.
- */
-static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- struct urb *urb = qtd->urb;
- int pipe_type = usb_pipetype(urb->pipe);
-
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "STALL Received--\n", hc->hc_num);
-
- if (pipe_type == PIPE_CONTROL) {
- dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
- }
-
- if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
- dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
- /*
- * USB protocol requires resetting the data toggle for bulk
- * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
- * setup command is issued to the endpoint. Anticipate the
- * CLEAR_FEATURE command since a STALL has occurred and reset
- * the data toggle now.
- */
- hc->qh->data_toggle = 0;
- }
-
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
-
- disable_hc_int(hc_regs, stall);
-
- return 1;
-}
-
-/*
- * Updates the state of the URB when a transfer has been stopped due to an
- * abnormal condition before the transfer completes. Modifies the
- * actual_length field of the URB to reflect the number of bytes that have
- * actually been transferred via the host channel.
- */
-static void update_urb_state_xfer_intr(dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- struct urb *urb,
- dwc_otg_qtd_t *qtd,
- dwc_otg_halt_status_e halt_status)
-{
- uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
- halt_status, NULL);
- urb->actual_length += bytes_transferred;
-
-#ifdef DEBUG
- {
- hctsiz_data_t hctsiz;
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
- DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
- __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", hc->start_pkt_count);
- DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
- DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet);
- DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred);
- DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
- DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
- urb->transfer_buffer_length);
- }
-#endif
-}
-
-/**
- * Handles a host channel NAK interrupt. This handler may be called in either
- * DMA mode or Slave mode.
- */
-static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "NAK Received--\n", hc->hc_num);
-
- /*
- * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
- * interrupt. Re-start the SSPLIT transfer.
- */
- if (hc->do_split) {
- if (hc->complete_split) {
- qtd->error_count = 0;
- }
- qtd->complete_split = 0;
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
- goto handle_nak_done;
- }
-
- switch (usb_pipetype(qtd->urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- if (hcd->core_if->dma_enable && hc->ep_is_in) {
- /*
- * NAK interrupts are enabled on bulk/control IN
- * transfers in DMA mode for the sole purpose of
- * resetting the error count after a transaction error
- * occurs. The core will continue transferring data.
- */
- qtd->error_count = 0;
- goto handle_nak_done;
- }
-
- /*
- * NAK interrupts normally occur during OUT transfers in DMA
- * or Slave mode. For IN transfers, more requests will be
- * queued as request queue space is available.
- */
- qtd->error_count = 0;
-
- if (!hc->qh->ping_state) {
- update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
- qtd, DWC_OTG_HC_XFER_NAK);
- save_data_toggle(hc, hc_regs, qtd);
- if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
- hc->qh->ping_state = 1;
- }
- }
-
- /*
- * Halt the channel so the transfer can be re-started from
- * the appropriate point or the PING protocol will
- * start/continue.
- */
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
- break;
- case PIPE_INTERRUPT:
- qtd->error_count = 0;
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
- break;
- case PIPE_ISOCHRONOUS:
- /* Should never get called for isochronous transfers. */
- BUG();
- break;
- }
-
- handle_nak_done:
- disable_hc_int(hc_regs, nak);
-
- return 1;
-}
-
-/**
- * Handles a host channel ACK interrupt. This interrupt is enabled when
- * performing the PING protocol in Slave mode, when errors occur during
- * either Slave mode or DMA mode, and during Start Split transactions.
- */
-static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "ACK Received--\n", hc->hc_num);
-
- if (hc->do_split) {
- /*
- * Handle ACK on SSPLIT.
- * ACK should not occur in CSPLIT.
- */
- if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
- qtd->ssplit_out_xfer_count = hc->xfer_len;
- }
- if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
- /* Don't need complete for isochronous out transfers. */
- qtd->complete_split = 1;
- }
-
- /* ISOC OUT */
- if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
- switch (hc->xact_pos) {
- case DWC_HCSPLIT_XACTPOS_ALL:
- break;
- case DWC_HCSPLIT_XACTPOS_END:
- qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
- qtd->isoc_split_offset = 0;
- break;
- case DWC_HCSPLIT_XACTPOS_BEGIN:
- case DWC_HCSPLIT_XACTPOS_MID:
- /*
- * For BEGIN or MID, calculate the length for
- * the next microframe to determine the correct
- * SSPLIT token, either MID or END.
- */
- {
- struct usb_iso_packet_descriptor *frame_desc;
-
- frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index];
- qtd->isoc_split_offset += 188;
-
- if ((frame_desc->length - qtd->isoc_split_offset) <= 188) {
- qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
- } else {
- qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
- }
-
- }
- break;
- }
- } else {
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
- }
- } else {
- qtd->error_count = 0;
-
- if (hc->qh->ping_state) {
- hc->qh->ping_state = 0;
- /*
- * Halt the channel so the transfer can be re-started
- * from the appropriate point. This only happens in
- * Slave mode. In DMA mode, the ping_state is cleared
- * when the transfer is started because the core
- * automatically executes the PING, then the transfer.
- */
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
- }
- }
-
- /*
- * If the ACK occurred when _not_ in the PING state, let the channel
- * continue transferring data after clearing the error count.
- */
-
- disable_hc_int(hc_regs, ack);
-
- return 1;
-}
-
-/**
- * Handles a host channel NYET interrupt. This interrupt should only occur on
- * Bulk and Control OUT endpoints and for complete split transactions. If a
- * NYET occurs at the same time as a Transfer Complete interrupt, it is
- * handled in the xfercomp interrupt handler, not here. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "NYET Received--\n", hc->hc_num);
-
- /*
- * NYET on CSPLIT
- * re-do the CSPLIT immediately on non-periodic
- */
- if (hc->do_split && hc->complete_split) {
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-
- if (dwc_full_frame_num(frnum) !=
- dwc_full_frame_num(hc->qh->sched_frame)) {
- /*
- * No longer in the same full speed frame.
- * Treat this as a transaction error.
- */
-#if 0
- /** @todo Fix system performance so this can
- * be treated as an error. Right now complete
- * splits cannot be scheduled precisely enough
- * due to other system activity, so this error
- * occurs regularly in Slave mode.
- */
- qtd->error_count++;
-#endif
- qtd->complete_split = 0;
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
- /** @todo add support for isoc release */
- goto handle_nyet_done;
- }
- }
-
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
- goto handle_nyet_done;
- }
-
- hc->qh->ping_state = 1;
- qtd->error_count = 0;
-
- update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
- DWC_OTG_HC_XFER_NYET);
- save_data_toggle(hc, hc_regs, qtd);
-
- /*
- * Halt the channel and re-start the transfer so the PING
- * protocol will start.
- */
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-
-handle_nyet_done:
- disable_hc_int(hc_regs, nyet);
- return 1;
-}
-
-/**
- * Handles a host channel babble interrupt. This handler may be called in
- * either DMA mode or Slave mode.
- */
-static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Babble Error--\n", hc->hc_num);
- if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
- dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW);
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
- } else {
- dwc_otg_halt_status_e halt_status;
- halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
- DWC_OTG_HC_XFER_BABBLE_ERR);
- halt_channel(hcd, hc, qtd, halt_status);
- }
- disable_hc_int(hc_regs, bblerr);
- return 1;
-}
-
-/**
- * Handles a host channel AHB error interrupt. This handler is only called in
- * DMA mode.
- */
-static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
- hctsiz_data_t hctsiz;
- uint32_t hcdma;
- struct urb *urb = qtd->urb;
-
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "AHB Error--\n", hc->hc_num);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
- hcdma = dwc_read_reg32(&hc_regs->hcdma);
-
- DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
- DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
- DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
- DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
- DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
- (usb_pipein(urb->pipe) ? "IN" : "OUT"));
- DWC_ERROR(" Endpoint type: %s\n",
- ({char *pipetype;
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL: pipetype = "CONTROL"; break;
- case PIPE_BULK: pipetype = "BULK"; break;
- case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
- case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
- default: pipetype = "UNKNOWN"; break;
- }; pipetype;}));
- DWC_ERROR(" Speed: %s\n",
- ({char *speed;
- switch (urb->dev->speed) {
- case USB_SPEED_HIGH: speed = "HIGH"; break;
- case USB_SPEED_FULL: speed = "FULL"; break;
- case USB_SPEED_LOW: speed = "LOW"; break;
- default: speed = "UNKNOWN"; break;
- }; speed;}));
- DWC_ERROR(" Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
- DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
- DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
- urb->transfer_buffer, (void *)urb->transfer_dma);
- DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
- urb->setup_packet, (void *)urb->setup_dma);
- DWC_ERROR(" Interval: %d\n", urb->interval);
-
- dwc_otg_hcd_complete_urb(hcd, urb, -EIO);
-
- /*
- * Force a channel halt. Don't call halt_channel because that won't
- * write to the HCCHARn register in DMA mode to force the halt.
- */
- dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
-
- disable_hc_int(hc_regs, ahberr);
- return 1;
-}
-
-/**
- * Handles a host channel transaction error interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Transaction Error--\n", hc->hc_num);
-
- switch (usb_pipetype(qtd->urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- qtd->error_count++;
- if (!hc->qh->ping_state) {
- update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
- qtd, DWC_OTG_HC_XFER_XACT_ERR);
- save_data_toggle(hc, hc_regs, qtd);
- if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) {
- hc->qh->ping_state = 1;
- }
- }
-
- /*
- * Halt the channel so the transfer can be re-started from
- * the appropriate point or the PING protocol will start.
- */
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
- break;
- case PIPE_INTERRUPT:
- qtd->error_count++;
- if (hc->do_split && hc->complete_split) {
- qtd->complete_split = 0;
- }
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
- break;
- case PIPE_ISOCHRONOUS:
- {
- dwc_otg_halt_status_e halt_status;
- halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
- DWC_OTG_HC_XFER_XACT_ERR);
-
- halt_channel(hcd, hc, qtd, halt_status);
- }
- break;
- }
-
- disable_hc_int(hc_regs, xacterr);
-
- return 1;
-}
-
-/**
- * Handles a host channel frame overrun interrupt. This handler may be called
- * in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Frame Overrun--\n", hc->hc_num);
-
- switch (usb_pipetype(qtd->urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- break;
- case PIPE_INTERRUPT:
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
- break;
- case PIPE_ISOCHRONOUS:
- {
- dwc_otg_halt_status_e halt_status;
- halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
- DWC_OTG_HC_XFER_FRAME_OVERRUN);
-
- halt_channel(hcd, hc, qtd, halt_status);
- }
- break;
- }
-
- disable_hc_int(hc_regs, frmovrun);
-
- return 1;
-}
-
-/**
- * Handles a host channel data toggle error interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Data Toggle Error--\n", hc->hc_num);
-
- if (hc->ep_is_in) {
- qtd->error_count = 0;
- } else {
- DWC_ERROR("Data Toggle Error on OUT transfer,"
- "channel %d\n", hc->hc_num);
- }
-
- disable_hc_int(hc_regs, datatglerr);
-
- return 1;
-}
-
-#ifdef DEBUG
-/**
- * This function is for debug only. It checks that a valid halt status is set
- * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
- * taken and a warning is issued.
- * @return 1 if halt status is ok, 0 otherwise.
- */
-static inline int halt_status_ok(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
- hcsplt_data_t hcsplt;
-
- if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
- /*
- * This code is here only as a check. This condition should
- * never happen. Ignore the halt if it does occur.
- */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
- hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
- DWC_WARN("%s: hc->halt_status == DWC_OTG"
- "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
- "hcint 0x%08x, hcintmsk 0x%08x, "
- "hcsplt 0x%08x, qtd->complete_split %d\n",
- __func__, hc->hc_num, hcchar.d32, hctsiz.d32,
- hcint.d32, hcintmsk.d32,
- hcsplt.d32, qtd->complete_split);
-
- DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
- __func__, hc->hc_num);
- DWC_WARN("\n");
- clear_hc_int(hc_regs, chhltd);
- return 0;
- }
-
- /*
- * This code is here only as a check. hcchar.chdis should
- * never be set when the halt interrupt occurs. Halt the
- * channel again if it does occur.
- */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chdis) {
- DWC_WARN("%s: hcchar.chdis set unexpectedly, "
- "hcchar 0x%08x, trying to halt again\n",
- __func__, hcchar.d32);
- clear_hc_int(hc_regs, chhltd);
- hc->halt_pending = 0;
- halt_channel(hcd, hc, qtd, hc->halt_status);
- return 0;
- }
-
- return 1;
-}
-#endif
-
-/**
- * Handles a host Channel Halted interrupt in DMA mode. This handler
- * determines the reason the channel halted and proceeds accordingly.
- */
-static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
- int out_nak_enh = 0;
-
- /* For core with OUT NAK enhancement, the flow for high-
- * speed CONTROL/BULK OUT is handled a little differently.
- */
- if (hcd->core_if->snpsid >= 0x4F54271A) {
- if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
- (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
- hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
- printk(KERN_DEBUG "OUT NAK enhancement enabled\n");
- out_nak_enh = 1;
- } else {
- printk(KERN_DEBUG "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
- }
- } else {
-// printk(KERN_DEBUG "OUT NAK enhancement disabled, no core support\n");
- }
-
- if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
- hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
- /*
- * Just release the channel. A dequeue can happen on a
- * transfer timeout. In the case of an AHB Error, the channel
- * was forced to halt because there's no way to gracefully
- * recover.
- */
- release_channel(hcd, hc, qtd, hc->halt_status);
- return;
- }
-
- /* Read the HCINTn register to determine the cause for the halt. */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-
- if (hcint.b.xfercomp) {
- /** @todo This is here because of a possible hardware bug. Spec
- * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
- * interrupt w/ACK bit set should occur, but I only see the
- * XFERCOMP bit, even with it masked out. This is a workaround
- * for that behavior. Should fix this when hardware is fixed.
- */
- if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
- handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
- }
- handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
- } else if (hcint.b.stall) {
- handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
- } else if (hcint.b.xacterr) {
- if (out_nak_enh) {
- if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
- printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n");
- qtd->error_count = 0;
- } else {
- printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n");
- }
- }
-
- /*
- * Must handle xacterr before nak or ack. Could get a xacterr
- * at the same time as either of these on a BULK/CONTROL OUT
- * that started with a PING. The xacterr takes precedence.
- */
- handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
- } else if (!out_nak_enh) {
- if (hcint.b.nyet) {
- /*
- * Must handle nyet before nak or ack. Could get a nyet at the
- * same time as either of those on a BULK/CONTROL OUT that
- * started with a PING. The nyet takes precedence.
- */
- handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
- } else if (hcint.b.bblerr) {
- handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
- } else if (hcint.b.frmovrun) {
- handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
- } else if (hcint.b.nak && !hcintmsk.b.nak) {
- /*
- * If nak is not masked, it's because a non-split IN transfer
- * is in an error state. In that case, the nak is handled by
- * the nak interrupt handler, not here. Handle nak here for
- * BULK/CONTROL OUT transfers, which halt on a NAK to allow
- * rewinding the buffer pointer.
- */
- handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
- } else if (hcint.b.ack && !hcintmsk.b.ack) {
- /*
- * If ack is not masked, it's because a non-split IN transfer
- * is in an error state. In that case, the ack is handled by
- * the ack interrupt handler, not here. Handle ack here for
- * split transfers. Start splits halt on ACK.
- */
- handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
- } else {
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * A periodic transfer halted with no other channel
- * interrupts set. Assume it was halted by the core
- * because it could not be completed in its scheduled
- * (micro)frame.
- */
-#ifdef DEBUG
- DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
- __func__, hc->hc_num);
-#endif
- halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
- } else {
- DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
- "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
- __func__, hc->hc_num, hcint.d32,
- dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts));
- }
- }
- } else {
- printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32);
- }
-}
-
-/**
- * Handles a host channel Channel Halted interrupt.
- *
- * In slave mode, this handler is called only when the driver specifically
- * requests a halt. This occurs during handling other host channel interrupts
- * (e.g. nak, xacterr, stall, nyet, etc.).
- *
- * In DMA mode, this is the interrupt that occurs when the core has finished
- * processing a transfer on a channel. Other host channel interrupts (except
- * ahberr) are disabled in DMA mode.
- */
-static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd,
- dwc_hc_t *hc,
- dwc_otg_hc_regs_t *hc_regs,
- dwc_otg_qtd_t *qtd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Channel Halted--\n", hc->hc_num);
-
- if (hcd->core_if->dma_enable) {
- handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
- } else {
-#ifdef DEBUG
- if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
- return 1;
- }
-#endif
- release_channel(hcd, hc, qtd, hc->halt_status);
- }
-
- return 1;
-}
-
-/** Handles interrupt for a specific Host Channel */
-int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num)
-{
- int retval = 0;
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
- dwc_hc_t *hc;
- dwc_otg_hc_regs_t *hc_regs;
- dwc_otg_qtd_t *qtd;
-
- DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
-
- hc = dwc_otg_hcd->hc_ptr_array[num];
- hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
- qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
- DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
- hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
- hcint.d32 = hcint.d32 & hcintmsk.d32;
-
- if (!dwc_otg_hcd->core_if->dma_enable) {
- if (hcint.b.chhltd && hcint.d32 != 0x2) {
- hcint.b.chhltd = 0;
- }
- }
-
- if (hcint.b.xfercomp) {
- retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- /*
- * If NYET occurred at same time as Xfer Complete, the NYET is
- * handled by the Xfer Complete interrupt handler. Don't want
- * to call the NYET interrupt handler in this case.
- */
- hcint.b.nyet = 0;
- }
- if (hcint.b.chhltd) {
- retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.ahberr) {
- retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.stall) {
- retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.nak) {
- retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.ack) {
- retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.nyet) {
- retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.xacterr) {
- retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.bblerr) {
- retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.frmovrun) {
- retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.datatglerr) {
- retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
- }
-
- return retval;
-}
-
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
deleted file mode 100644
index cfb1f16410..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+++ /dev/null
@@ -1,684 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
- * $Revision: 1.5 $
- * $Date: 2008-12-15 06:51:32 $
- * $Change: 537387 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-/**
- * @file
- *
- * This file contains the functions to manage Queue Heads and Queue
- * Transfer Descriptors.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_hcd.h"
-#include "dwc_otg_regs.h"
-
-/**
- * This function allocates and initializes a QH.
- *
- * @param hcd The HCD state structure for the DWC OTG controller.
- * @param[in] urb Holds the information about the device/endpoint that we need
- * to initialize the QH.
- *
- * @return Returns pointer to the newly allocated QH, or NULL on error. */
-dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb)
-{
- dwc_otg_qh_t *qh;
-
- /* Allocate memory */
- /** @todo add memflags argument */
- qh = dwc_otg_hcd_qh_alloc ();
- if (qh == NULL) {
- return NULL;
- }
-
- dwc_otg_hcd_qh_init (hcd, qh, urb);
- return qh;
-}
-
-/** Free each QTD in the QH's QTD-list then free the QH. QH should already be
- * removed from a list. QTD list should already be empty if called from URB
- * Dequeue.
- *
- * @param[in] hcd HCD instance.
- * @param[in] qh The QH to free.
- */
-void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- dwc_otg_qtd_t *qtd;
- struct list_head *pos;
- unsigned long flags;
-
- /* Free each QTD in the QTD list */
- SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
- for (pos = qh->qtd_list.next;
- pos != &qh->qtd_list;
- pos = qh->qtd_list.next)
- {
- list_del (pos);
- qtd = dwc_list_to_qtd (pos);
- dwc_otg_hcd_qtd_free (qtd);
- }
- SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-
- if (qh->dw_align_buf) {
- dma_free_coherent((dwc_otg_hcd_to_hcd(hcd))->self.controller,
- hcd->core_if->core_params->max_transfer_size,
- qh->dw_align_buf,
- qh->dw_align_buf_dma);
- }
-
- kfree (qh);
- return;
-}
-
-/** Initializes a QH structure.
- *
- * @param[in] hcd The HCD state structure for the DWC OTG controller.
- * @param[in] qh The QH to init.
- * @param[in] urb Holds the information about the device/endpoint that we need
- * to initialize the QH. */
-#define SCHEDULE_SLOP 10
-void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
-{
- char *speed, *type;
- memset (qh, 0, sizeof (dwc_otg_qh_t));
-
- /* Initialize QH */
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
- break;
- case PIPE_BULK:
- qh->ep_type = USB_ENDPOINT_XFER_BULK;
- break;
- case PIPE_ISOCHRONOUS:
- qh->ep_type = USB_ENDPOINT_XFER_ISOC;
- break;
- case PIPE_INTERRUPT:
- qh->ep_type = USB_ENDPOINT_XFER_INT;
- break;
- }
-
- qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
-
- qh->data_toggle = DWC_OTG_HC_PID_DATA0;
- qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
- INIT_LIST_HEAD(&qh->qtd_list);
- INIT_LIST_HEAD(&qh->qh_list_entry);
- qh->channel = NULL;
-
- /* FS/LS Enpoint on HS Hub
- * NOT virtual root hub */
- qh->do_split = 0;
- if (((urb->dev->speed == USB_SPEED_LOW) ||
- (urb->dev->speed == USB_SPEED_FULL)) &&
- (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
- {
- DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
- usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
- urb->dev->ttport);
- qh->do_split = 1;
- }
-
- if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
- qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /* Compute scheduling parameters once and save them. */
- hprt0_data_t hprt;
-
- /** @todo Account for split transfers in the bus time. */
- int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
-
- /* FIXME: work-around patch by Steven */
- qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed,
- usb_pipein(urb->pipe),
- (qh->ep_type == USB_ENDPOINT_XFER_ISOC),
- bytecount));
-
- /* Start in a slightly future (micro)frame. */
- qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
- SCHEDULE_SLOP);
- qh->interval = urb->interval;
-#if 0
- /* Increase interrupt polling rate for debugging. */
- if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
- qh->interval = 8;
- }
-#endif
- hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
- if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
- ((urb->dev->speed == USB_SPEED_LOW) ||
- (urb->dev->speed == USB_SPEED_FULL))) {
- qh->interval *= 8;
- qh->sched_frame |= 0x7;
- qh->start_split_frame = qh->sched_frame;
- }
-
- }
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh);
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
- urb->dev->devnum);
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
- usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
-
- switch(urb->dev->speed) {
- case USB_SPEED_LOW:
- speed = "low";
- break;
- case USB_SPEED_FULL:
- speed = "full";
- break;
- case USB_SPEED_HIGH:
- speed = "high";
- break;
- default:
- speed = "?";
- break;
- }
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed);
-
- switch (qh->ep_type) {
- case USB_ENDPOINT_XFER_ISOC:
- type = "isochronous";
- break;
- case USB_ENDPOINT_XFER_INT:
- type = "interrupt";
- break;
- case USB_ENDPOINT_XFER_CONTROL:
- type = "control";
- break;
- case USB_ENDPOINT_XFER_BULK:
- type = "bulk";
- break;
- default:
- type = "?";
- break;
- }
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",type);
-
-#ifdef DEBUG
- if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
- qh->usecs);
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
- qh->interval);
- }
-#endif
- qh->dw_align_buf = NULL;
- return;
-}
-
-/**
- * Checks that a channel is available for a periodic transfer.
- *
- * @return 0 if successful, negative error code otherise.
- */
-static int periodic_channel_available(dwc_otg_hcd_t *hcd)
-{
- /*
- * Currently assuming that there is a dedicated host channnel for each
- * periodic transaction plus at least one host channel for
- * non-periodic transactions.
- */
- int status;
- int num_channels;
-
- num_channels = hcd->core_if->core_params->host_channels;
- if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) &&
- (hcd->periodic_channels < num_channels - 1)) {
- status = 0;
- }
- else {
- DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
- __func__, num_channels, hcd->periodic_channels,
- hcd->non_periodic_channels);
- status = -ENOSPC;
- }
-
- return status;
-}
-
-/**
- * Checks that there is sufficient bandwidth for the specified QH in the
- * periodic schedule. For simplicity, this calculation assumes that all the
- * transfers in the periodic schedule may occur in the same (micro)frame.
- *
- * @param hcd The HCD state structure for the DWC OTG controller.
- * @param qh QH containing periodic bandwidth required.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- int status;
- uint16_t max_claimed_usecs;
-
- status = 0;
-
- if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) {
- /*
- * High speed mode.
- * Max periodic usecs is 80% x 125 usec = 100 usec.
- */
- max_claimed_usecs = 100 - qh->usecs;
- } else {
- /*
- * Full speed mode.
- * Max periodic usecs is 90% x 1000 usec = 900 usec.
- */
- max_claimed_usecs = 900 - qh->usecs;
- }
-
- if (hcd->periodic_usecs > max_claimed_usecs) {
- DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n",
- __func__, hcd->periodic_usecs, qh->usecs);
- status = -ENOSPC;
- }
-
- return status;
-}
-
-/**
- * Checks that the max transfer size allowed in a host channel is large enough
- * to handle the maximum data transfer in a single (micro)frame for a periodic
- * transfer.
- *
- * @param hcd The HCD state structure for the DWC OTG controller.
- * @param qh QH for a periodic endpoint.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- int status;
- uint32_t max_xfer_size;
- uint32_t max_channel_xfer_size;
-
- status = 0;
-
- max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
- max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
-
- if (max_xfer_size > max_channel_xfer_size) {
- DWC_NOTICE("%s: Periodic xfer length %d > "
- "max xfer length for channel %d\n",
- __func__, max_xfer_size, max_channel_xfer_size);
- status = -ENOSPC;
- }
-
- return status;
-}
-
-/**
- * Schedules an interrupt or isochronous transfer in the periodic schedule.
- *
- * @param hcd The HCD state structure for the DWC OTG controller.
- * @param qh QH for the periodic transfer. The QH should already contain the
- * scheduling information.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- int status = 0;
-
- status = periodic_channel_available(hcd);
- if (status) {
- DWC_NOTICE("%s: No host channel available for periodic "
- "transfer.\n", __func__);
- return status;
- }
-
- status = check_periodic_bandwidth(hcd, qh);
- if (status) {
- DWC_NOTICE("%s: Insufficient periodic bandwidth for "
- "periodic transfer.\n", __func__);
- return status;
- }
-
- status = check_max_xfer_size(hcd, qh);
- if (status) {
- DWC_NOTICE("%s: Channel max transfer size too small "
- "for periodic transfer.\n", __func__);
- return status;
- }
-
- /* Always start in the inactive schedule. */
- list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive);
-
- /* Reserve the periodic channel. */
- hcd->periodic_channels++;
-
- /* Update claimed usecs per (micro)frame. */
- hcd->periodic_usecs += qh->usecs;
-
- /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
- hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval;
- if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
- hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++;
- DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
- qh, qh->usecs, qh->interval);
- } else {
- hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++;
- DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
- qh, qh->usecs, qh->interval);
- }
-
- return status;
-}
-
-/**
- * This function adds a QH to either the non periodic or periodic schedule if
- * it is not already in the schedule. If the QH is already in the schedule, no
- * action is taken.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- unsigned long flags;
- int status = 0;
-
- SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
-
- if (!list_empty(&qh->qh_list_entry)) {
- /* QH already in a schedule. */
- goto done;
- }
-
- /* Add the new QH to the appropriate schedule */
- if (dwc_qh_is_non_per(qh)) {
- /* Always start in the inactive schedule. */
- list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive);
- } else {
- status = schedule_periodic(hcd, qh);
- }
-
- done:
- SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-
- return status;
-}
-
-/**
- * Removes an interrupt or isochronous transfer from the periodic schedule.
- *
- * @param hcd The HCD state structure for the DWC OTG controller.
- * @param qh QH for the periodic transfer.
- */
-static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- list_del_init(&qh->qh_list_entry);
-
- /* Release the periodic channel reservation. */
- hcd->periodic_channels--;
-
- /* Update claimed usecs per (micro)frame. */
- hcd->periodic_usecs -= qh->usecs;
-
- /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
- hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval;
-
- if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
- hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--;
- DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
- qh, qh->usecs, qh->interval);
- } else {
- hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--;
- DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
- qh, qh->usecs, qh->interval);
- }
-}
-
-/**
- * Removes a QH from either the non-periodic or periodic schedule. Memory is
- * not freed.
- *
- * @param[in] hcd The HCD state structure.
- * @param[in] qh QH to remove from schedule. */
-void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-{
- unsigned long flags;
-
- SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-
- if (list_empty(&qh->qh_list_entry)) {
- /* QH is not in a schedule. */
- goto done;
- }
-
- if (dwc_qh_is_non_per(qh)) {
- if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
- hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
- }
- list_del_init(&qh->qh_list_entry);
- } else {
- deschedule_periodic(hcd, qh);
- }
-
- done:
- SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-}
-
-/**
- * Deactivates a QH. For non-periodic QHs, removes the QH from the active
- * non-periodic schedule. The QH is added to the inactive non-periodic
- * schedule if any QTDs are still attached to the QH.
- *
- * For periodic QHs, the QH is removed from the periodic queued schedule. If
- * there are any QTDs still attached to the QH, the QH is added to either the
- * periodic inactive schedule or the periodic ready schedule and its next
- * scheduled frame is calculated. The QH is placed in the ready schedule if
- * the scheduled frame has been reached already. Otherwise it's placed in the
- * inactive schedule. If there are no QTDs attached to the QH, the QH is
- * completely removed from the periodic schedule.
- */
-void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split)
-{
- unsigned long flags;
- SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-
- if (dwc_qh_is_non_per(qh)) {
- dwc_otg_hcd_qh_remove(hcd, qh);
- if (!list_empty(&qh->qtd_list)) {
- /* Add back to inactive non-periodic schedule. */
- dwc_otg_hcd_qh_add(hcd, qh);
- }
- } else {
- uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-
- if (qh->do_split) {
- /* Schedule the next continuing periodic split transfer */
- if (sched_next_periodic_split) {
-
- qh->sched_frame = frame_number;
- if (dwc_frame_num_le(frame_number,
- dwc_frame_num_inc(qh->start_split_frame, 1))) {
- /*
- * Allow one frame to elapse after start
- * split microframe before scheduling
- * complete split, but DONT if we are
- * doing the next start split in the
- * same frame for an ISOC out.
- */
- if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) {
- qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1);
- }
- }
- } else {
- qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame,
- qh->interval);
- if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
- qh->sched_frame = frame_number;
- }
- qh->sched_frame |= 0x7;
- qh->start_split_frame = qh->sched_frame;
- }
- } else {
- qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval);
- if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
- qh->sched_frame = frame_number;
- }
- }
-
- if (list_empty(&qh->qtd_list)) {
- dwc_otg_hcd_qh_remove(hcd, qh);
- } else {
- /*
- * Remove from periodic_sched_queued and move to
- * appropriate queue.
- */
- if (qh->sched_frame == frame_number) {
- list_move(&qh->qh_list_entry,
- &hcd->periodic_sched_ready);
- } else {
- list_move(&qh->qh_list_entry,
- &hcd->periodic_sched_inactive);
- }
- }
- }
-
- SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-}
-
-/**
- * This function allocates and initializes a QTD.
- *
- * @param[in] urb The URB to create a QTD from. Each URB-QTD pair will end up
- * pointing to each other so each pair should have a unique correlation.
- *
- * @return Returns pointer to the newly allocated QTD, or NULL on error. */
-dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb)
-{
- dwc_otg_qtd_t *qtd;
-
- qtd = dwc_otg_hcd_qtd_alloc ();
- if (qtd == NULL) {
- return NULL;
- }
-
- dwc_otg_hcd_qtd_init (qtd, urb);
- return qtd;
-}
-
-/**
- * Initializes a QTD structure.
- *
- * @param[in] qtd The QTD to initialize.
- * @param[in] urb The URB to use for initialization. */
-void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb)
-{
- memset (qtd, 0, sizeof (dwc_otg_qtd_t));
- qtd->urb = urb;
- if (usb_pipecontrol(urb->pipe)) {
- /*
- * The only time the QTD data toggle is used is on the data
- * phase of control transfers. This phase always starts with
- * DATA1.
- */
- qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
- qtd->control_phase = DWC_OTG_CONTROL_SETUP;
- }
-
- /* start split */
- qtd->complete_split = 0;
- qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
- qtd->isoc_split_offset = 0;
-
- /* Store the qtd ptr in the urb to reference what QTD. */
- urb->hcpriv = qtd;
- return;
-}
-
-/**
- * This function adds a QTD to the QTD-list of a QH. It will find the correct
- * QH to place the QTD into. If it does not find a QH, then it will create a
- * new QH. If the QH to which the QTD is added is not currently scheduled, it
- * is placed into the proper schedule based on its EP type.
- *
- * @param[in] qtd The QTD to add
- * @param[in] dwc_otg_hcd The DWC HCD structure
- *
- * @return 0 if successful, negative error code otherwise.
- */
-int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd,
- dwc_otg_hcd_t *dwc_otg_hcd)
-{
- struct usb_host_endpoint *ep;
- dwc_otg_qh_t *qh;
- unsigned long flags;
- int retval = 0;
-
- struct urb *urb = qtd->urb;
-
- SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-
- /*
- * Get the QH which holds the QTD-list to insert to. Create QH if it
- * doesn't exist.
- */
- ep = dwc_urb_to_endpoint(urb);
- qh = (dwc_otg_qh_t *)ep->hcpriv;
- if (qh == NULL) {
- qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb);
- if (qh == NULL) {
- goto done;
- }
- ep->hcpriv = qh;
- }
-
- retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh);
- if (retval == 0) {
- list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
- }
-
- done:
- SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-
- return retval;
-}
-
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.c
deleted file mode 100644
index 030a3f2856..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.c
+++ /dev/null
@@ -1,2523 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
- * $Revision: 1.5 $
- * $Date: 2008-11-27 09:21:25 $
- * $Change: 1115682 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_HOST_ONLY
-
-/** @file
- * This file implements the Peripheral Controller Driver.
- *
- * The Peripheral Controller Driver (PCD) is responsible for
- * translating requests from the Function Driver into the appropriate
- * actions on the DWC_otg controller. It isolates the Function Driver
- * from the specifics of the controller by providing an API to the
- * Function Driver.
- *
- * The Peripheral Controller Driver for Linux will implement the
- * Gadget API, so that the existing Gadget drivers can be used.
- * (Gadget Driver is the Linux terminology for a Function Driver.)
- *
- * The Linux Gadget API is defined in the header file
- * <code><linux/usb_gadget.h></code>. The USB EP operations API is
- * defined in the structure <code>usb_ep_ops</code> and the USB
- * Controller API is defined in the structure
- * <code>usb_gadget_ops</code>.
- *
- * An important function of the PCD is managing interrupts generated
- * by the DWC_otg controller. The implementation of the DWC_otg device
- * mode interrupt service routines is in dwc_otg_pcd_intr.c.
- *
- * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
- * @todo Does it work when the request size is greater than DEPTSIZ
- * transfer size
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/version.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-# include <linux/usb/ch9.h>
-#else
-# include <linux/usb_ch9.h>
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-#include <linux/usb/gadget.h>
-#else
-#include <linux/usb_gadget.h>
-#endif
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_pcd.h"
-
-
-/**
- * Static PCD pointer for use in usb_gadget_register_driver and
- * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init.
- */
-static dwc_otg_pcd_t *s_pcd = 0;
-
-
-/* Display the contents of the buffer */
-extern void dump_msg(const u8 *buf, unsigned int length);
-
-
-/**
- * This function completes a request. It call's the request call back.
- */
-void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
- int status)
-{
- unsigned stopped = ep->stopped;
-
- DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
- list_del_init(&req->queue);
-
- if (req->req.status == -EINPROGRESS) {
- req->req.status = status;
- } else {
- status = req->req.status;
- }
-
- /* don't modify queue heads during completion callback */
- ep->stopped = 1;
- SPIN_UNLOCK(&ep->pcd->lock);
- req->req.complete(&ep->ep, &req->req);
- SPIN_LOCK(&ep->pcd->lock);
-
- if (ep->pcd->request_pending > 0) {
- --ep->pcd->request_pending;
- }
-
- ep->stopped = stopped;
-}
-
-/**
- * This function terminates all the requsts in the EP request queue.
- */
-void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
-{
- dwc_otg_pcd_request_t *req;
-
- ep->stopped = 1;
-
- /* called with irqs blocked?? */
- while (!list_empty(&ep->queue)) {
- req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
- queue);
- dwc_otg_request_done(ep, req, -ESHUTDOWN);
- }
-}
-
-/* USB Endpoint Operations */
-/*
- * The following sections briefly describe the behavior of the Gadget
- * API endpoint operations implemented in the DWC_otg driver
- * software. Detailed descriptions of the generic behavior of each of
- * these functions can be found in the Linux header file
- * include/linux/usb_gadget.h.
- *
- * The Gadget API provides wrapper functions for each of the function
- * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
- * function, which then calls the underlying PCD function. The
- * following sections are named according to the wrapper
- * functions. Within each section, the corresponding DWC_otg PCD
- * function name is specified.
- *
- */
-
-/**
- * This function assigns periodic Tx FIFO to an periodic EP
- * in shared Tx FIFO mode
- */
-static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if)
-{
- uint32_t PerTxMsk = 1;
- int i;
- for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
- {
- if((PerTxMsk & core_if->p_tx_msk) == 0) {
- core_if->p_tx_msk |= PerTxMsk;
- return i + 1;
- }
- PerTxMsk <<= 1;
- }
- return 0;
-}
-/**
- * This function releases periodic Tx FIFO
- * in shared Tx FIFO mode
- */
-static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
-{
- core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
-}
-/**
- * This function assigns periodic Tx FIFO to an periodic EP
- * in shared Tx FIFO mode
- */
-static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
-{
- uint32_t TxMsk = 1;
- int i;
-
- for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
- {
- if((TxMsk & core_if->tx_msk) == 0) {
- core_if->tx_msk |= TxMsk;
- return i + 1;
- }
- TxMsk <<= 1;
- }
- return 0;
-}
-/**
- * This function releases periodic Tx FIFO
- * in shared Tx FIFO mode
- */
-static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
-{
- core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
-}
-
-/**
- * This function is called by the Gadget Driver for each EP to be
- * configured for the current configuration (SET_CONFIGURATION).
- *
- * This function initializes the dwc_otg_ep_t data structure, and then
- * calls dwc_otg_ep_activate.
- */
-static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
- const struct usb_endpoint_descriptor *ep_desc)
-{
- dwc_otg_pcd_ep_t *ep = 0;
- dwc_otg_pcd_t *pcd = 0;
- unsigned long flags;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
- if (!usb_ep || !ep_desc || ep->desc ||
- ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
- DWC_WARN("%s, bad ep or descriptor\n", __func__);
- return -EINVAL;
- }
- if (ep == &ep->pcd->ep0) {
- DWC_WARN("%s, bad ep(0)\n", __func__);
- return -EINVAL;
- }
-
- /* Check FIFO size? */
- if (!ep_desc->wMaxPacketSize) {
- DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
- return -ERANGE;
- }
-
- pcd = ep->pcd;
- if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
- DWC_WARN("%s, bogus device state\n", __func__);
- return -ESHUTDOWN;
- }
-
- SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-
- ep->desc = ep_desc;
- ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
-
- /*
- * Activate the EP
- */
- ep->stopped = 0;
-
- ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
- ep->dwc_ep.maxpacket = ep->ep.maxpacket;
-
- ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-
- if(ep->dwc_ep.is_in) {
- if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
- ep->dwc_ep.tx_fifo_num = 0;
-
- if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
- /*
- * if ISOC EP then assign a Periodic Tx FIFO.
- */
- ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
- }
- } else {
- /*
- * if Dedicated FIFOs mode is on then assign a Tx FIFO.
- */
- ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
-
- }
- }
- /* Set initial data PID. */
- if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
- ep->dwc_ep.data_pid_start = 0;
- }
-
- DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
- ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
- ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
-
- if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
- ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
- }
-
- dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
- return 0;
-}
-
-/**
- * This function is called when an EP is disabled due to disconnect or
- * change in configuration. Any pending requests will terminate with a
- * status of -ESHUTDOWN.
- *
- * This function modifies the dwc_otg_ep_t data structure for this EP,
- * and then calls dwc_otg_ep_deactivate.
- */
-static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
-{
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_t *pcd = 0;
- unsigned long flags;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
- if (!usb_ep || !ep->desc) {
- DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
- usb_ep ? ep->ep.name : NULL);
- return -EINVAL;
- }
-
- SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-
- dwc_otg_request_nuke(ep);
-
- dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
- ep->desc = 0;
- ep->stopped = 1;
-
- if(ep->dwc_ep.is_in) {
- dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
- release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
- release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
- }
-
- /* Free DMA Descriptors */
- pcd = ep->pcd;
-
- SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
-
- if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
- dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
- }
-
- DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
- return 0;
-}
-
-
-/**
- * This function allocates a request object to use with the specified
- * endpoint.
- *
- * @param ep The endpoint to be used with with the request
- * @param gfp_flags the GFP_* flags to use.
- */
-static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- int gfp_flags
-#else
- gfp_t gfp_flags
-#endif
- )
-{
- dwc_otg_pcd_request_t *req;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
- if (0 == ep) {
- DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
- return 0;
- }
- req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
- if (0 == req) {
- DWC_WARN("%s() %s\n", __func__,
- "request allocation failed!\n");
- return 0;
- }
- memset(req, 0, sizeof(dwc_otg_pcd_request_t));
- req->req.dma = DMA_ADDR_INVALID;
- INIT_LIST_HEAD(&req->queue);
- return &req->req;
-}
-
-/**
- * This function frees a request object.
- *
- * @param ep The endpoint associated with the request
- * @param req The request being freed
- */
-static void dwc_otg_pcd_free_request(struct usb_ep *ep,
- struct usb_request *req)
-{
- dwc_otg_pcd_request_t *request;
- DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
-
- if (0 == ep || 0 == req) {
- DWC_WARN("%s() %s\n", __func__,
- "Invalid ep or req argument!\n");
- return;
- }
-
- request = container_of(req, dwc_otg_pcd_request_t, req);
- kfree(request);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
-/**
- * This function allocates an I/O buffer to be used for a transfer
- * to/from the specified endpoint.
- *
- * @param usb_ep The endpoint to be used with with the request
- * @param bytes The desired number of bytes for the buffer
- * @param dma Pointer to the buffer's DMA address; must be valid
- * @param gfp_flags the GFP_* flags to use.
- * @return address of a new buffer or null is buffer could not be allocated.
- */
-static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
- dma_addr_t *dma,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- int gfp_flags
-#else
- gfp_t gfp_flags
-#endif
- )
-{
- void *buf;
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_t *pcd = 0;
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
- pcd = ep->pcd;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
- dma, gfp_flags);
-
- /* Check dword alignment */
- if ((bytes & 0x3UL) != 0) {
- DWC_WARN("%s() Buffer size is not a multiple of"
- "DWORD size (%d)",__func__, bytes);
- }
-
- if (GET_CORE_IF(pcd)->dma_enable) {
- buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
- }
- else {
- buf = kmalloc(bytes, gfp_flags);
- }
-
- /* Check dword alignment */
- if (((int)buf & 0x3UL) != 0) {
- DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
- __func__, buf);
- }
-
- return buf;
-}
-
-/**
- * This function frees an I/O buffer that was allocated by alloc_buffer.
- *
- * @param usb_ep the endpoint associated with the buffer
- * @param buf address of the buffer
- * @param dma The buffer's DMA address
- * @param bytes The number of bytes of the buffer
- */
-static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
- dma_addr_t dma, unsigned bytes)
-{
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_t *pcd = 0;
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
- pcd = ep->pcd;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
-
- if (GET_CORE_IF(pcd)->dma_enable) {
- dma_free_coherent (NULL, bytes, buf, dma);
- }
- else {
- kfree(buf);
- }
-}
-#endif
-
-
-/**
- * This function is used to submit an I/O Request to an EP.
- *
- * - When the request completes the request's completion callback
- * is called to return the request to the driver.
- * - An EP, except control EPs, may have multiple requests
- * pending.
- * - Once submitted the request cannot be examined or modified.
- * - Each request is turned into one or more packets.
- * - A BULK EP can queue any amount of data; the transfer is
- * packetized.
- * - Zero length Packets are specified with the request 'zero'
- * flag.
- */
-static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
- struct usb_request *usb_req,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- int gfp_flags
-#else
- gfp_t gfp_flags
-#endif
- )
-{
- int prevented = 0;
- dwc_otg_pcd_request_t *req;
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_t *pcd;
- unsigned long flags = 0;
- dwc_otg_core_if_t *_core_if;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
- __func__, usb_ep, usb_req, gfp_flags);
-
- req = container_of(usb_req, dwc_otg_pcd_request_t, req);
- if (!usb_req || !usb_req->complete || !usb_req->buf ||
- !list_empty(&req->queue)) {
- DWC_WARN("%s, bad params\n", __func__);
- return -EINVAL;
- }
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
- if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
- DWC_WARN("%s, bad ep\n", __func__);
- return -EINVAL;
- }
-
- pcd = ep->pcd;
- if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
- DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
- DWC_WARN("%s, bogus device state\n", __func__);
- return -ESHUTDOWN;
- }
-
-
- DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
- usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-
- if (!GET_CORE_IF(pcd)->core_params->opt) {
- if (ep->dwc_ep.num != 0) {
- DWC_ERROR("%s queue req %p, len %d buf %p\n",
- usb_ep->name, usb_req, usb_req->length, usb_req->buf);
- }
- }
-
- SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-
-
- /**************************************************
- New add by kaiker ,for DMA mode bug
- ************************************************/
- //by kaiker ,for RT3052 USB OTG device mode
-
- _core_if = GET_CORE_IF(pcd);
-
- if (_core_if->dma_enable)
- {
- usb_req->dma = virt_to_phys((void *)usb_req->buf);
-
- if(ep->dwc_ep.is_in)
- {
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) || defined(CONFIG_MIPS)
- if(usb_req->length)
- dma_cache_wback_inv((unsigned long)usb_req->buf, usb_req->length + 2);
-#endif
- }
- }
-
-
-
-#if defined(DEBUG) & defined(VERBOSE)
- dump_msg(usb_req->buf, usb_req->length);
-#endif
-
- usb_req->status = -EINPROGRESS;
- usb_req->actual = 0;
-
- /*
- * For EP0 IN without premature status, zlp is required?
- */
- if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
- DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
- //_req->zero = 1;
- }
-
- /* Start the transfer */
- if (list_empty(&ep->queue) && !ep->stopped) {
- /* EP0 Transfer? */
- if (ep->dwc_ep.num == 0) {
- switch (pcd->ep0state) {
- case EP0_IN_DATA_PHASE:
- DWC_DEBUGPL(DBG_PCD,
- "%s ep0: EP0_IN_DATA_PHASE\n",
- __func__);
- break;
-
- case EP0_OUT_DATA_PHASE:
- DWC_DEBUGPL(DBG_PCD,
- "%s ep0: EP0_OUT_DATA_PHASE\n",
- __func__);
- if (pcd->request_config) {
- /* Complete STATUS PHASE */
- ep->dwc_ep.is_in = 1;
- pcd->ep0state = EP0_IN_STATUS_PHASE;
- }
- break;
-
- case EP0_IN_STATUS_PHASE:
- DWC_DEBUGPL(DBG_PCD,
- "%s ep0: EP0_IN_STATUS_PHASE\n",
- __func__);
- break;
-
- default:
- DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
- pcd->ep0state);
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
- return -EL2HLT;
- }
- ep->dwc_ep.dma_addr = usb_req->dma;
- ep->dwc_ep.start_xfer_buff = usb_req->buf;
- ep->dwc_ep.xfer_buff = usb_req->buf;
- ep->dwc_ep.xfer_len = usb_req->length;
- ep->dwc_ep.xfer_count = 0;
- ep->dwc_ep.sent_zlp = 0;
- ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-
- if(usb_req->zero) {
- if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
- && (ep->dwc_ep.xfer_len != 0)) {
- ep->dwc_ep.sent_zlp = 1;
- }
-
- }
-
- dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
- }
- else {
-
- uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-
- /* Setup and start the Transfer */
- ep->dwc_ep.dma_addr = usb_req->dma;
- ep->dwc_ep.start_xfer_buff = usb_req->buf;
- ep->dwc_ep.xfer_buff = usb_req->buf;
- ep->dwc_ep.sent_zlp = 0;
- ep->dwc_ep.total_len = usb_req->length;
- ep->dwc_ep.xfer_len = 0;
- ep->dwc_ep.xfer_count = 0;
-
- if(max_transfer > MAX_TRANSFER_SIZE) {
- ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
- } else {
- ep->dwc_ep.maxxfer = max_transfer;
- }
-
- if(usb_req->zero) {
- if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
- && (ep->dwc_ep.total_len != 0)) {
- ep->dwc_ep.sent_zlp = 1;
- }
-
- }
- dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
- }
- }
-
- if ((req != 0) || prevented) {
- ++pcd->request_pending;
- list_add_tail(&req->queue, &ep->queue);
- if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
- /** @todo NGS Create a function for this. */
- diepmsk_data_t diepmsk = { .d32 = 0};
- diepmsk.b.intktxfemp = 1;
- if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
- dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
- 0, diepmsk.d32);
- } else {
- dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
- }
- }
- }
-
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
- return 0;
-}
-
-/**
- * This function cancels an I/O request from an EP.
- */
-static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
- struct usb_request *usb_req)
-{
- dwc_otg_pcd_request_t *req;
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_t *pcd;
- unsigned long flags;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
- if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
- DWC_WARN("%s, bad argument\n", __func__);
- return -EINVAL;
- }
- pcd = ep->pcd;
- if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
- DWC_WARN("%s, bogus device state\n", __func__);
- return -ESHUTDOWN;
- }
-
- SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
- DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
- ep->dwc_ep.is_in ? "IN" : "OUT",
- usb_req);
-
- /* make sure it's actually queued on this endpoint */
- list_for_each_entry(req, &ep->queue, queue)
- {
- if (&req->req == usb_req) {
- break;
- }
- }
-
- if (&req->req != usb_req) {
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
- return -EINVAL;
- }
-
- if (!list_empty(&req->queue)) {
- dwc_otg_request_done(ep, req, -ECONNRESET);
- }
- else {
- req = 0;
- }
-
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
- return req ? 0 : -EOPNOTSUPP;
-}
-
-/**
- * usb_ep_set_halt stalls an endpoint.
- *
- * usb_ep_clear_halt clears an endpoint halt and resets its data
- * toggle.
- *
- * Both of these functions are implemented with the same underlying
- * function. The behavior depends on the value argument.
- *
- * @param[in] usb_ep the Endpoint to halt or clear halt.
- * @param[in] value
- * - 0 means clear_halt.
- * - 1 means set_halt,
- * - 2 means clear stall lock flag.
- * - 3 means set stall lock flag.
- */
-static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
-{
- int retval = 0;
- unsigned long flags;
- dwc_otg_pcd_ep_t *ep = 0;
-
-
- DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-
- if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
- ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
- DWC_WARN("%s, bad ep\n", __func__);
- return -EINVAL;
- }
-
- SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
- if (!list_empty(&ep->queue)) {
- DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
- retval = -EAGAIN;
- }
- else if (value == 0) {
- dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
- &ep->dwc_ep);
- }
- else if(value == 1) {
- if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
- dtxfsts_data_t txstatus;
- fifosize_data_t txfifosize;
-
- txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
- txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
-
- if(txstatus.b.txfspcavail < txfifosize.b.depth) {
- DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
- retval = -EAGAIN;
- }
- else {
- if (ep->dwc_ep.num == 0) {
- ep->pcd->ep0state = EP0_STALL;
- }
-
- ep->stopped = 1;
- dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
- &ep->dwc_ep);
- }
- }
- else {
- if (ep->dwc_ep.num == 0) {
- ep->pcd->ep0state = EP0_STALL;
- }
-
- ep->stopped = 1;
- dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
- &ep->dwc_ep);
- }
- }
- else if (value == 2) {
- ep->dwc_ep.stall_clear_flag = 0;
- }
- else if (value == 3) {
- ep->dwc_ep.stall_clear_flag = 1;
- }
-
- SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
- return retval;
-}
-
-/**
- * This function allocates a DMA Descriptor chain for the Endpoint
- * buffer to be used for a transfer to/from the specified endpoint.
- */
-dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
-{
-
- return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
-}
-
-/**
- * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
- */
-void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
-{
- dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
-}
-
-#ifdef DWC_EN_ISOC
-
-/**
- * This function initializes a descriptor chain for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP to start the transfer on.
- *
- */
-void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
-
- dsts_data_t dsts = { .d32 = 0};
- depctl_data_t depctl = { .d32 = 0 };
- volatile uint32_t *addr;
- int i, j;
-
- if(dwc_ep->is_in)
- dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
- else
- dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-
-
- /** Allocate descriptors for double buffering */
- dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
- if(dwc_ep->desc_addr) {
- DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
- return;
- }
-
- dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
- /** ISO OUT EP */
- if(dwc_ep->is_in == 0) {
- desc_sts_data_t sts = { .d32 =0 };
- dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
- dma_addr_t dma_ad;
- uint32_t data_per_desc;
- dwc_otg_dev_out_ep_regs_t *out_regs =
- core_if->dev_if->out_ep_regs[dwc_ep->num];
- int offset;
-
- addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
- dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
-
- /** Buffer 0 descriptors setup */
- dma_ad = dwc_ep->dma_addr0;
-
- sts.b_iso_out.bs = BS_HOST_READY;
- sts.b_iso_out.rxsts = 0;
- sts.b_iso_out.l = 0;
- sts.b_iso_out.sp = 0;
- sts.b_iso_out.ioc = 0;
- sts.b_iso_out.pid = 0;
- sts.b_iso_out.framenum = 0;
-
- offset = 0;
- for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
- {
-
- for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
- {
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- offset += data_per_desc;
- dma_desc ++;
- (uint32_t)dma_ad += data_per_desc;
- }
- }
-
- for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
- {
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- offset += data_per_desc;
- dma_desc ++;
- (uint32_t)dma_ad += data_per_desc;
- }
-
- sts.b_iso_out.ioc = 1;
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
-
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
- dma_desc ++;
-
- /** Buffer 1 descriptors setup */
- sts.b_iso_out.ioc = 0;
- dma_ad = dwc_ep->dma_addr1;
-
- offset = 0;
- for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
- {
- for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
- {
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- offset += data_per_desc;
- dma_desc ++;
- (uint32_t)dma_ad += data_per_desc;
- }
- }
- for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
- {
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- offset += data_per_desc;
- dma_desc ++;
- (uint32_t)dma_ad += data_per_desc;
- }
-
- sts.b_iso_out.ioc = 1;
- sts.b_iso_out.l = 1;
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
-
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- dwc_ep->next_frame = 0;
-
- /** Write dma_ad into DOEPDMA register */
- dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
-
- }
- /** ISO IN EP */
- else {
- desc_sts_data_t sts = { .d32 =0 };
- dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
- dma_addr_t dma_ad;
- dwc_otg_dev_in_ep_regs_t *in_regs =
- core_if->dev_if->in_ep_regs[dwc_ep->num];
- unsigned int frmnumber;
- fifosize_data_t txfifosize,rxfifosize;
-
- txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
- rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
-
-
- addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-
- dma_ad = dwc_ep->dma_addr0;
-
- dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
- sts.b_iso_in.bs = BS_HOST_READY;
- sts.b_iso_in.txsts = 0;
- sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
- sts.b_iso_in.ioc = 0;
- sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-
-
- frmnumber = dwc_ep->next_frame;
-
- sts.b_iso_in.framenum = frmnumber;
- sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
- sts.b_iso_in.l = 0;
-
- /** Buffer 0 descriptors setup */
- for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
- {
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
- dma_desc ++;
-
- (uint32_t)dma_ad += dwc_ep->data_per_frame;
- sts.b_iso_in.framenum += dwc_ep->bInterval;
- }
-
- sts.b_iso_in.ioc = 1;
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
- ++dma_desc;
-
- /** Buffer 1 descriptors setup */
- sts.b_iso_in.ioc = 0;
- dma_ad = dwc_ep->dma_addr1;
-
- for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
- {
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
- dma_desc ++;
-
- (uint32_t)dma_ad += dwc_ep->data_per_frame;
- sts.b_iso_in.framenum += dwc_ep->bInterval;
-
- sts.b_iso_in.ioc = 0;
- }
- sts.b_iso_in.ioc = 1;
- sts.b_iso_in.l = 1;
-
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
-
- /** Write dma_ad into diepdma register */
- dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
- }
- /** Enable endpoint, clear nak */
- depctl.d32 = 0;
- depctl.b.epena = 1;
- depctl.b.usbactep = 1;
- depctl.b.cnak = 1;
-
- dwc_modify_reg32(addr, depctl.d32,depctl.d32);
- depctl.d32 = dwc_read_reg32(addr);
-}
-
-/**
- * This function initializes a descriptor chain for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-
-void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl = { .d32 = 0 };
- volatile uint32_t *addr;
-
-
- if(ep->is_in) {
- addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
- } else {
- addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
- }
-
-
- if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
- return;
- } else {
- deptsiz_data_t deptsiz = { .d32 = 0 };
-
- ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
- ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
- ep->maxpacket;
- ep->xfer_count = 0;
- ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
- ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-
- if(ep->is_in) {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- deptsiz.b.mc = ep->pkt_per_frm;
- deptsiz.b.xfersize = ep->xfer_len;
- deptsiz.b.pktcnt =
- (ep->xfer_len - 1 + ep->maxpacket) /
- ep->maxpacket;
- dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-
- /* Write the DMA register */
- dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
-
- } else {
- deptsiz.b.pktcnt =
- (ep->xfer_len + (ep->maxpacket - 1)) /
- ep->maxpacket;
- deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-
- dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-
- /* Write the DMA register */
- dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
-
- }
- /** Enable endpoint, clear nak */
- depctl.d32 = 0;
- dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-
- depctl.b.epena = 1;
- depctl.b.cnak = 1;
-
- dwc_modify_reg32(addr, depctl.d32,depctl.d32);
- }
-}
-
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer. For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-
-void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- if(core_if->dma_enable) {
- if(core_if->dma_desc_enable) {
- if(ep->is_in) {
- ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
- } else {
- ep->desc_cnt = ep->pkt_cnt;
- }
- dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
- } else {
- if(core_if->pti_enh_enable) {
- dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
- } else {
- ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
- ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
- dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
- }
- }
- } else {
- ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
- ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
- dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
- }
-}
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer. For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- */
-
-void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- depctl_data_t depctl = { .d32 = 0 };
- volatile uint32_t *addr;
-
- if(ep->is_in == 1) {
- addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
- }
- else {
- addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
- }
-
- /* disable the ep */
- depctl.d32 = dwc_read_reg32(addr);
-
- depctl.b.epdis = 1;
- depctl.b.snak = 1;
-
- dwc_write_reg32(addr, depctl.d32);
-
- if(core_if->dma_desc_enable &&
- ep->iso_desc_addr && ep->iso_dma_desc_addr) {
- dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
- }
-
- /* reset varibales */
- ep->dma_addr0 = 0;
- ep->dma_addr1 = 0;
- ep->xfer_buff0 = 0;
- ep->xfer_buff1 = 0;
- ep->data_per_frame = 0;
- ep->data_pattern_frame = 0;
- ep->sync_frame = 0;
- ep->buf_proc_intrvl = 0;
- ep->bInterval = 0;
- ep->proc_buf_num = 0;
- ep->pkt_per_frm = 0;
- ep->pkt_per_frm = 0;
- ep->desc_cnt = 0;
- ep->iso_desc_addr = 0;
- ep->iso_dma_desc_addr = 0;
-}
-
-
-/**
- * This function is used to submit an ISOC Transfer Request to an EP.
- *
- * - Every time a sync period completes the request's completion callback
- * is called to provide data to the gadget driver.
- * - Once submitted the request cannot be modified.
- * - Each request is turned into periodic data packets untill ISO
- * Transfer is stopped..
- */
-static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- int gfp_flags
-#else
- gfp_t gfp_flags
-#endif
-)
-{
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_t *pcd;
- dwc_ep_t *dwc_ep;
- unsigned long flags = 0;
- int32_t frm_data;
- dwc_otg_core_if_t *core_if;
- dcfg_data_t dcfg;
- dsts_data_t dsts;
-
-
- if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
- DWC_WARN("%s, bad params\n", __func__);
- return -EINVAL;
- }
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-
- if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
- DWC_WARN("%s, bad ep\n", __func__);
- return -EINVAL;
- }
-
- pcd = ep->pcd;
- core_if = GET_CORE_IF(pcd);
-
- dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-
- if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
- DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
- DWC_WARN("%s, bogus device state\n", __func__);
- return -ESHUTDOWN;
- }
-
- SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-
- dwc_ep = &ep->dwc_ep;
-
- if(ep->iso_req) {
- DWC_WARN("%s, iso request in progress\n", __func__);
- }
- req->status = -EINPROGRESS;
-
- dwc_ep->dma_addr0 = req->dma0;
- dwc_ep->dma_addr1 = req->dma1;
-
- dwc_ep->xfer_buff0 = req->buf0;
- dwc_ep->xfer_buff1 = req->buf1;
-
- ep->iso_req = req;
-
- dwc_ep->data_per_frame = req->data_per_frame;
-
- /** @todo - pattern data support is to be implemented in the future */
- dwc_ep->data_pattern_frame = req->data_pattern_frame;
- dwc_ep->sync_frame = req->sync_frame;
-
- dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
-
- dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
-
- dwc_ep->proc_buf_num = 0;
-
- dwc_ep->pkt_per_frm = 0;
- frm_data = ep->dwc_ep.data_per_frame;
- while(frm_data > 0) {
- dwc_ep->pkt_per_frm++;
- frm_data -= ep->dwc_ep.maxpacket;
- }
-
- dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
- if(req->flags & USB_REQ_ISO_ASAP) {
- dwc_ep->next_frame = dsts.b.soffn + 1;
- if(dwc_ep->bInterval != 1){
- dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
- }
- } else {
- dwc_ep->next_frame = req->start_frame;
- }
-
-
- if(!core_if->pti_enh_enable) {
- dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
- } else {
- dwc_ep->pkt_cnt =
- (dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
- - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
- }
-
- if(core_if->dma_desc_enable) {
- dwc_ep->desc_cnt =
- dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
- }
-
- dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
- if(!dwc_ep->pkt_info) {
- return -ENOMEM;
- }
- if(core_if->pti_enh_enable) {
- memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
- }
-
- dwc_ep->cur_pkt = 0;
-
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
- dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
-
- return 0;
-}
-
-/**
- * This function stops ISO EP Periodic Data Transfer.
- */
-static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
-{
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_t *pcd;
- dwc_ep_t *dwc_ep;
- unsigned long flags;
-
- ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-
- if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
- DWC_WARN("%s, bad ep\n", __func__);
- return -EINVAL;
- }
-
- pcd = ep->pcd;
-
- if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
- DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
- DWC_WARN("%s, bogus device state\n", __func__);
- return -ESHUTDOWN;
- }
-
- dwc_ep = &ep->dwc_ep;
-
- dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
-
- kfree(dwc_ep->pkt_info);
-
- SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-
- if(ep->iso_req != req) {
- return -EINVAL;
- }
-
- req->status = -ECONNRESET;
-
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-
-
- ep->iso_req = 0;
-
- return 0;
-}
-
-/**
- * This function is used for perodical data exchnage between PCD and gadget drivers.
- * for Isochronous EPs
- *
- * - Every time a sync period completes this function is called to
- * perform data exchange between PCD and gadget
- */
-void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
-{
- int i;
- struct usb_gadget_iso_packet_descriptor *iso_packet;
- dwc_ep_t *dwc_ep;
-
- dwc_ep = &ep->dwc_ep;
-
- if(ep->iso_req->status == -ECONNRESET) {
- DWC_PRINT("Device has already disconnected\n");
- /*Device has been disconnected*/
- return;
- }
-
- if(dwc_ep->proc_buf_num != 0) {
- iso_packet = ep->iso_req->iso_packet_desc0;
- }
-
- else {
- iso_packet = ep->iso_req->iso_packet_desc1;
- }
-
- /* Fill in ISOC packets descriptors & pass to gadget driver*/
-
- for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
- iso_packet[i].status = dwc_ep->pkt_info[i].status;
- iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
- iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
- dwc_ep->pkt_info[i].status = 0;
- dwc_ep->pkt_info[i].offset = 0;
- dwc_ep->pkt_info[i].length = 0;
- }
-
- /* Call callback function to process data buffer */
- ep->iso_req->status = 0;/* success */
-
- SPIN_UNLOCK(&ep->pcd->lock);
- ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
- SPIN_LOCK(&ep->pcd->lock);
-}
-
-
-static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- int gfp_flags
-#else
- gfp_t gfp_flags
-#endif
-)
-{
- struct usb_iso_request *pReq = NULL;
- uint32_t req_size;
-
-
- req_size = sizeof(struct usb_iso_request);
- req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
-
-
- pReq = kmalloc(req_size, gfp_flags);
- if (!pReq) {
- DWC_WARN("%s, can't allocate Iso Request\n", __func__);
- return 0;
- }
- pReq->iso_packet_desc0 = (void*) (pReq + 1);
-
- pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
-
- return pReq;
-}
-
-static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
-{
- kfree(req);
-}
-
-static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
-{
- .ep_ops =
- {
- .enable = dwc_otg_pcd_ep_enable,
- .disable = dwc_otg_pcd_ep_disable,
-
- .alloc_request = dwc_otg_pcd_alloc_request,
- .free_request = dwc_otg_pcd_free_request,
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
- .alloc_buffer = dwc_otg_pcd_alloc_buffer,
- .free_buffer = dwc_otg_pcd_free_buffer,
-#endif
-
- .queue = dwc_otg_pcd_ep_queue,
- .dequeue = dwc_otg_pcd_ep_dequeue,
-
- .set_halt = dwc_otg_pcd_ep_set_halt,
- .fifo_status = 0,
- .fifo_flush = 0,
- },
- .iso_ep_start = dwc_otg_pcd_iso_ep_start,
- .iso_ep_stop = dwc_otg_pcd_iso_ep_stop,
- .alloc_iso_request = dwc_otg_pcd_alloc_iso_request,
- .free_iso_request = dwc_otg_pcd_free_iso_request,
-};
-
-#else
-
-
-static struct usb_ep_ops dwc_otg_pcd_ep_ops =
-{
- .enable = dwc_otg_pcd_ep_enable,
- .disable = dwc_otg_pcd_ep_disable,
-
- .alloc_request = dwc_otg_pcd_alloc_request,
- .free_request = dwc_otg_pcd_free_request,
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
- .alloc_buffer = dwc_otg_pcd_alloc_buffer,
- .free_buffer = dwc_otg_pcd_free_buffer,
-#endif
-
- .queue = dwc_otg_pcd_ep_queue,
- .dequeue = dwc_otg_pcd_ep_dequeue,
-
- .set_halt = dwc_otg_pcd_ep_set_halt,
- .fifo_status = 0,
- .fifo_flush = 0,
-
-
-};
-
-#endif /* DWC_EN_ISOC */
-/* Gadget Operations */
-/**
- * The following gadget operations will be implemented in the DWC_otg
- * PCD. Functions in the API that are not described below are not
- * implemented.
- *
- * The Gadget API provides wrapper functions for each of the function
- * pointers defined in usb_gadget_ops. The Gadget Driver calls the
- * wrapper function, which then calls the underlying PCD function. The
- * following sections are named according to the wrapper functions
- * (except for ioctl, which doesn't have a wrapper function). Within
- * each section, the corresponding DWC_otg PCD function name is
- * specified.
- *
- */
-
-/**
- *Gets the USB Frame number of the last SOF.
- */
-static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
-{
- dwc_otg_pcd_t *pcd;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-
- if (gadget == 0) {
- return -ENODEV;
- }
- else {
- pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
- dwc_otg_get_frame_number(GET_CORE_IF(pcd));
- }
-
- return 0;
-}
-
-void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
-{
- uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
- gotgctl_data_t mem;
- gotgctl_data_t val;
-
- val.d32 = dwc_read_reg32(addr);
- if (val.b.sesreq) {
- DWC_ERROR("Session Request Already active!\n");
- return;
- }
-
- DWC_NOTICE("Session Request Initated\n");
- mem.d32 = dwc_read_reg32(addr);
- mem.b.sesreq = 1;
- dwc_write_reg32(addr, mem.d32);
-
- /* Start the SRP timer */
- dwc_otg_pcd_start_srp_timer(pcd);
- return;
-}
-
-void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
-{
- dctl_data_t dctl = {.d32=0};
- volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
-
- if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
- if (pcd->remote_wakeup_enable) {
- if (set) {
- dctl.b.rmtwkupsig = 1;
- dwc_modify_reg32(addr, 0, dctl.d32);
- DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
- mdelay(1);
- dwc_modify_reg32(addr, dctl.d32, 0);
- DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
- }
- else {
- }
- }
- else {
- DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
- }
- }
- return;
-}
-
-/**
- * Initiates Session Request Protocol (SRP) to wakeup the host if no
- * session is in progress. If a session is already in progress, but
- * the device is suspended, remote wakeup signaling is started.
- *
- */
-static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
-{
- unsigned long flags;
- dwc_otg_pcd_t *pcd;
- dsts_data_t dsts;
- gotgctl_data_t gotgctl;
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-
- if (gadget == 0) {
- return -ENODEV;
- }
- else {
- pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
- }
- SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-
- /*
- * This function starts the Protocol if no session is in progress. If
- * a session is already in progress, but the device is suspended,
- * remote wakeup signaling is started.
- */
-
- /* Check if valid session */
- gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
- if (gotgctl.b.bsesvld) {
- /* Check if suspend state */
- dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
- if (dsts.b.suspsts) {
- dwc_otg_pcd_remote_wakeup(pcd, 1);
- }
- }
- else {
- dwc_otg_pcd_initiate_srp(pcd);
- }
-
- SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
- return 0;
-}
-
-static const struct usb_gadget_ops dwc_otg_pcd_ops =
-{
- .get_frame = dwc_otg_pcd_get_frame,
- .wakeup = dwc_otg_pcd_wakeup,
- // current versions must always be self-powered
-};
-
-/**
- * This function updates the otg values in the gadget structure.
- */
-void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
-{
-
- if (!pcd->gadget.is_otg)
- return;
-
- if (reset) {
- pcd->b_hnp_enable = 0;
- pcd->a_hnp_support = 0;
- pcd->a_alt_hnp_support = 0;
- }
-
- pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
- pcd->gadget.a_hnp_support = pcd->a_hnp_support;
- pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
-}
-
-/**
- * This function is the top level PCD interrupt handler.
- */
-static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
- , struct pt_regs *r
-#endif
- )
-{
- dwc_otg_pcd_t *pcd = dev;
- int32_t retval = IRQ_NONE;
-
- retval = dwc_otg_pcd_handle_intr(pcd);
- return IRQ_RETVAL(retval);
-}
-
-/**
- * PCD Callback function for initializing the PCD when switching to
- * device mode.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_start_cb(void *p)
-{
- dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-
- /*
- * Initialized the Core for Device mode.
- */
- if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
- dwc_otg_core_dev_init(GET_CORE_IF(pcd));
- }
- return 1;
-}
-
-/**
- * PCD Callback function for stopping the PCD when switching to Host
- * mode.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_stop_cb(void *p)
-{
- dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
- extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
-
- dwc_otg_pcd_stop(pcd);
- return 1;
-}
-
-
-/**
- * PCD Callback function for notifying the PCD when resuming from
- * suspend.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_suspend_cb(void *p)
-{
- dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-
- if (pcd->driver && pcd->driver->resume) {
- SPIN_UNLOCK(&pcd->lock);
- pcd->driver->suspend(&pcd->gadget);
- SPIN_LOCK(&pcd->lock);
- }
-
- return 1;
-}
-
-
-/**
- * PCD Callback function for notifying the PCD when resuming from
- * suspend.
- *
- * @param p void pointer to the <code>dwc_otg_pcd_t</code>
- */
-static int32_t dwc_otg_pcd_resume_cb(void *p)
-{
- dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-
- if (pcd->driver && pcd->driver->resume) {
- SPIN_UNLOCK(&pcd->lock);
- pcd->driver->resume(&pcd->gadget);
- SPIN_LOCK(&pcd->lock);
- }
-
- /* Stop the SRP timeout timer. */
- if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
- (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
- if (GET_CORE_IF(pcd)->srp_timer_started) {
- GET_CORE_IF(pcd)->srp_timer_started = 0;
- del_timer(&pcd->srp_timer);
- }
- }
- return 1;
-}
-
-
-/**
- * PCD Callback structure for handling mode switching.
- */
-static dwc_otg_cil_callbacks_t pcd_callbacks =
-{
- .start = dwc_otg_pcd_start_cb,
- .stop = dwc_otg_pcd_stop_cb,
- .suspend = dwc_otg_pcd_suspend_cb,
- .resume_wakeup = dwc_otg_pcd_resume_cb,
- .p = 0, /* Set at registration */
-};
-
-/**
- * This function is called when the SRP timer expires. The SRP should
- * complete within 6 seconds.
- */
-static void srp_timeout(unsigned long ptr)
-{
- gotgctl_data_t gotgctl;
- dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
- volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
-
- gotgctl.d32 = dwc_read_reg32(addr);
-
- core_if->srp_timer_started = 0;
-
- if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
- (core_if->core_params->i2c_enable)) {
- DWC_PRINT("SRP Timeout\n");
-
- if ((core_if->srp_success) &&
- (gotgctl.b.bsesvld)) {
- if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
- core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
- }
-
- /* Clear Session Request */
- gotgctl.d32 = 0;
- gotgctl.b.sesreq = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
- gotgctl.d32, 0);
-
- core_if->srp_success = 0;
- }
- else {
- DWC_ERROR("Device not connected/responding\n");
- gotgctl.b.sesreq = 0;
- dwc_write_reg32(addr, gotgctl.d32);
- }
- }
- else if (gotgctl.b.sesreq) {
- DWC_PRINT("SRP Timeout\n");
-
- DWC_ERROR("Device not connected/responding\n");
- gotgctl.b.sesreq = 0;
- dwc_write_reg32(addr, gotgctl.d32);
- }
- else {
- DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
- }
-}
-
-/**
- * Start the SRP timer to detect when the SRP does not complete within
- * 6 seconds.
- *
- * @param pcd the pcd structure.
- */
-void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
-{
- struct timer_list *srp_timer = &pcd->srp_timer;
- GET_CORE_IF(pcd)->srp_timer_started = 1;
- init_timer(srp_timer);
- srp_timer->function = srp_timeout;
- srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
- srp_timer->expires = jiffies + (HZ*6);
- add_timer(srp_timer);
-}
-
-/**
- * Tasklet
- *
- */
-extern void start_next_request(dwc_otg_pcd_ep_t *ep);
-
-static void start_xfer_tasklet_func (unsigned long data)
-{
- dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
- dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
-
- int i;
- depctl_data_t diepctl;
-
- DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
-
- diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
-
- if (pcd->ep0.queue_sof) {
- pcd->ep0.queue_sof = 0;
- start_next_request (&pcd->ep0);
- // break;
- }
-
- for (i=0; i<core_if->dev_if->num_in_eps; i++)
- {
- depctl_data_t diepctl;
- diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
-
- if (pcd->in_ep[i].queue_sof) {
- pcd->in_ep[i].queue_sof = 0;
- start_next_request (&pcd->in_ep[i]);
- // break;
- }
- }
-
- return;
-}
-
-
-
-
-
-
-
-static struct tasklet_struct start_xfer_tasklet = {
- .next = NULL,
- .state = 0,
- .count = ATOMIC_INIT(0),
- .func = start_xfer_tasklet_func,
- .data = 0,
-};
-/**
- * This function initialized the pcd Dp structures to there default
- * state.
- *
- * @param pcd the pcd structure.
- */
-void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
-{
- static const char * names[] =
- {
-
- "ep0",
- "ep1in",
- "ep2in",
- "ep3in",
- "ep4in",
- "ep5in",
- "ep6in",
- "ep7in",
- "ep8in",
- "ep9in",
- "ep10in",
- "ep11in",
- "ep12in",
- "ep13in",
- "ep14in",
- "ep15in",
- "ep1out",
- "ep2out",
- "ep3out",
- "ep4out",
- "ep5out",
- "ep6out",
- "ep7out",
- "ep8out",
- "ep9out",
- "ep10out",
- "ep11out",
- "ep12out",
- "ep13out",
- "ep14out",
- "ep15out"
-
- };
-
- int i;
- int in_ep_cntr, out_ep_cntr;
- uint32_t hwcfg1;
- uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
- uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
- dwc_otg_pcd_ep_t *ep;
-
- DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-
- INIT_LIST_HEAD (&pcd->gadget.ep_list);
- pcd->gadget.ep0 = &pcd->ep0.ep;
- pcd->gadget.speed = USB_SPEED_UNKNOWN;
-
- INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
-
- /**
- * Initialize the EP0 structure.
- */
- ep = &pcd->ep0;
-
- /* Init EP structure */
- ep->desc = 0;
- ep->pcd = pcd;
- ep->stopped = 1;
-
- /* Init DWC ep structure */
- ep->dwc_ep.num = 0;
- ep->dwc_ep.active = 0;
- ep->dwc_ep.tx_fifo_num = 0;
- /* Control until ep is actvated */
- ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
- ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
- ep->dwc_ep.dma_addr = 0;
- ep->dwc_ep.start_xfer_buff = 0;
- ep->dwc_ep.xfer_buff = 0;
- ep->dwc_ep.xfer_len = 0;
- ep->dwc_ep.xfer_count = 0;
- ep->dwc_ep.sent_zlp = 0;
- ep->dwc_ep.total_len = 0;
- ep->queue_sof = 0;
- ep->dwc_ep.desc_addr = 0;
- ep->dwc_ep.dma_desc_addr = 0;
-
-
- /* Init the usb_ep structure. */
- ep->ep.name = names[0];
- ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-
- /**
- * @todo NGS: What should the max packet size be set to
- * here? Before EP type is set?
- */
- ep->ep.maxpacket = MAX_PACKET_SIZE;
-
- list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-
- INIT_LIST_HEAD (&ep->queue);
- /**
- * Initialize the EP structures.
- */
- in_ep_cntr = 0;
- hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
-
- for (i = 1; in_ep_cntr < num_in_eps; i++)
- {
- if((hwcfg1 & 0x1) == 0) {
- dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
- in_ep_cntr ++;
-
- /* Init EP structure */
- ep->desc = 0;
- ep->pcd = pcd;
- ep->stopped = 1;
-
- /* Init DWC ep structure */
- ep->dwc_ep.is_in = 1;
- ep->dwc_ep.num = i;
- ep->dwc_ep.active = 0;
- ep->dwc_ep.tx_fifo_num = 0;
-
- /* Control until ep is actvated */
- ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
- ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
- ep->dwc_ep.dma_addr = 0;
- ep->dwc_ep.start_xfer_buff = 0;
- ep->dwc_ep.xfer_buff = 0;
- ep->dwc_ep.xfer_len = 0;
- ep->dwc_ep.xfer_count = 0;
- ep->dwc_ep.sent_zlp = 0;
- ep->dwc_ep.total_len = 0;
- ep->queue_sof = 0;
- ep->dwc_ep.desc_addr = 0;
- ep->dwc_ep.dma_desc_addr = 0;
-
- /* Init the usb_ep structure. */
- ep->ep.name = names[i];
- ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-
- /**
- * @todo NGS: What should the max packet size be set to
- * here? Before EP type is set?
- */
- ep->ep.maxpacket = MAX_PACKET_SIZE;
-
- list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-
- INIT_LIST_HEAD (&ep->queue);
- }
- hwcfg1 >>= 2;
- }
-
- out_ep_cntr = 0;
- hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
-
- for (i = 1; out_ep_cntr < num_out_eps; i++)
- {
- if((hwcfg1 & 0x1) == 0) {
- dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
- out_ep_cntr++;
-
- /* Init EP structure */
- ep->desc = 0;
- ep->pcd = pcd;
- ep->stopped = 1;
-
- /* Init DWC ep structure */
- ep->dwc_ep.is_in = 0;
- ep->dwc_ep.num = i;
- ep->dwc_ep.active = 0;
- ep->dwc_ep.tx_fifo_num = 0;
- /* Control until ep is actvated */
- ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
- ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
- ep->dwc_ep.dma_addr = 0;
- ep->dwc_ep.start_xfer_buff = 0;
- ep->dwc_ep.xfer_buff = 0;
- ep->dwc_ep.xfer_len = 0;
- ep->dwc_ep.xfer_count = 0;
- ep->dwc_ep.sent_zlp = 0;
- ep->dwc_ep.total_len = 0;
- ep->queue_sof = 0;
-
- /* Init the usb_ep structure. */
- ep->ep.name = names[15 + i];
- ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
- /**
- * @todo NGS: What should the max packet size be set to
- * here? Before EP type is set?
- */
- ep->ep.maxpacket = MAX_PACKET_SIZE;
-
- list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-
- INIT_LIST_HEAD (&ep->queue);
- }
- hwcfg1 >>= 2;
- }
-
- /* remove ep0 from the list. There is a ep0 pointer.*/
- list_del_init (&pcd->ep0.ep.ep_list);
-
- pcd->ep0state = EP0_DISCONNECT;
- pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
- pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
- pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-}
-
-/**
- * This function releases the Gadget device.
- * required by device_unregister().
- *
- * @todo Should this do something? Should it free the PCD?
- */
-static void dwc_otg_pcd_gadget_release(struct device *dev)
-{
- DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
-}
-
-
-
-/**
- * This function initialized the PCD portion of the driver.
- *
- */
-
-int dwc_otg_pcd_init(struct device *dev)
-{
- static char pcd_name[] = "dwc_otg_pcd";
- dwc_otg_pcd_t *pcd;
- dwc_otg_core_if_t* core_if;
- dwc_otg_dev_if_t* dev_if;
- dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
- int retval = 0;
-
-
- DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, dev);
- /*
- * Allocate PCD structure
- */
- pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
-
- if (pcd == 0) {
- return -ENOMEM;
- }
-
- memset(pcd, 0, sizeof(dwc_otg_pcd_t));
- spin_lock_init(&pcd->lock);
-
- otg_dev->pcd = pcd;
- s_pcd = pcd;
- pcd->gadget.name = pcd_name;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
- strcpy(pcd->gadget.dev.bus_id, "gadget");
-#else
- dev_set_name(&pcd->gadget.dev, "%s", "gadget");
-#endif
-
- pcd->otg_dev = dev_get_drvdata(dev);
-
- pcd->gadget.dev.parent = dev;
- pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
- pcd->gadget.ops = &dwc_otg_pcd_ops;
-
- core_if = GET_CORE_IF(pcd);
- dev_if = core_if->dev_if;
-
- if(core_if->hwcfg4.b.ded_fifo_en) {
- DWC_PRINT("Dedicated Tx FIFOs mode\n");
- }
- else {
- DWC_PRINT("Shared Tx FIFO mode\n");
- }
-
- /* If the module is set to FS or if the PHY_TYPE is FS then the gadget
- * should not report as dual-speed capable. replace the following line
- * with the block of code below it once the software is debugged for
- * this. If is_dualspeed = 0 then the gadget driver should not report
- * a device qualifier descriptor when queried. */
- if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
- ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
- (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
- (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
- pcd->gadget.is_dualspeed = 0;
- }
- else {
- pcd->gadget.is_dualspeed = 1;
- }
-
- if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
- (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
- (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
- (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
- pcd->gadget.is_otg = 0;
- }
- else {
- pcd->gadget.is_otg = 1;
- }
-
-
- pcd->driver = 0;
- /* Register the gadget device */
- retval = device_register(&pcd->gadget.dev);
- if (retval != 0) {
- kfree (pcd);
- return retval;
- }
-
-
- /*
- * Initialized the Core for Device mode.
- */
- if (dwc_otg_is_device_mode(core_if)) {
- dwc_otg_core_dev_init(core_if);
- }
-
- /*
- * Initialize EP structures
- */
- dwc_otg_pcd_reinit(pcd);
-
- /*
- * Register the PCD Callbacks.
- */
- dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
- pcd);
- /*
- * Setup interupt handler
- */
- DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq);
- retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq,
- IRQF_SHARED, pcd->gadget.name, pcd);
- if (retval != 0) {
- DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
- device_unregister(&pcd->gadget.dev);
- kfree (pcd);
- return -EBUSY;
- }
-
- /*
- * Initialize the DMA buffer for SETUP packets
- */
- if (GET_CORE_IF(pcd)->dma_enable) {
- pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
- if (pcd->setup_pkt == 0) {
- free_irq(otg_dev->irq, pcd);
- device_unregister(&pcd->gadget.dev);
- kfree (pcd);
- return -ENOMEM;
- }
-
- pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
- if (pcd->status_buf == 0) {
- dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
- free_irq(otg_dev->irq, pcd);
- device_unregister(&pcd->gadget.dev);
- kfree (pcd);
- return -ENOMEM;
- }
-
- if (GET_CORE_IF(pcd)->dma_desc_enable) {
- dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
- dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
- dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
- dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
-
- if(dev_if->setup_desc_addr[0] == 0
- || dev_if->setup_desc_addr[1] == 0
- || dev_if->in_desc_addr == 0
- || dev_if->out_desc_addr == 0 ) {
-
- if(dev_if->out_desc_addr)
- dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
- if(dev_if->in_desc_addr)
- dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
- if(dev_if->setup_desc_addr[1])
- dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
- if(dev_if->setup_desc_addr[0])
- dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
-
-
- dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
- dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-
- free_irq(otg_dev->irq, pcd);
- device_unregister(&pcd->gadget.dev);
- kfree (pcd);
-
- return -ENOMEM;
- }
- }
- }
- else {
- pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
- if (pcd->setup_pkt == 0) {
- free_irq(otg_dev->irq, pcd);
- device_unregister(&pcd->gadget.dev);
- kfree (pcd);
- return -ENOMEM;
- }
-
- pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
- if (pcd->status_buf == 0) {
- kfree(pcd->setup_pkt);
- free_irq(otg_dev->irq, pcd);
- device_unregister(&pcd->gadget.dev);
- kfree (pcd);
- return -ENOMEM;
- }
- }
-
-
- /* Initialize tasklet */
- start_xfer_tasklet.data = (unsigned long)pcd;
- pcd->start_xfer_tasklet = &start_xfer_tasklet;
-
- return 0;
-}
-
-/**
- * Cleanup the PCD.
- */
-void dwc_otg_pcd_remove(struct device *dev)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
- dwc_otg_pcd_t *pcd = otg_dev->pcd;
- dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
-
- DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
-
- /*
- * Free the IRQ
- */
- free_irq(otg_dev->irq, pcd);
-
- /* start with the driver above us */
- if (pcd->driver) {
- /* should have been done already by driver model core */
- DWC_WARN("driver '%s' is still registered\n",
- pcd->driver->driver.name);
- usb_gadget_unregister_driver(pcd->driver);
- }
- device_unregister(&pcd->gadget.dev);
-
- if (GET_CORE_IF(pcd)->dma_enable) {
- dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
- dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
- if (GET_CORE_IF(pcd)->dma_desc_enable) {
- dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
- dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
- dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
- dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
- }
- }
- else {
- kfree (pcd->setup_pkt);
- kfree (pcd->status_buf);
- }
-
- kfree(pcd);
- otg_dev->pcd = 0;
-}
-
-/**
- * This function registers a gadget driver with the PCD.
- *
- * When a driver is successfully registered, it will receive control
- * requests including set_configuration(), which enables non-control
- * requests. then usb traffic follows until a disconnect is reported.
- * then a host may connect again, or the driver might get unbound.
- *
- * @param driver The driver being registered
- */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *))
-#else
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-#endif
-{
- int retval;
- int (*d_bind)(struct usb_gadget *);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
- d_bind = bind;
-#else
- d_bind = driver->bind;
-#endif
-
- DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name);
-
- if (!driver || driver->speed == USB_SPEED_UNKNOWN ||
- !d_bind ||
- !driver->unbind ||
- !driver->disconnect ||
- !driver->setup) {
- DWC_DEBUGPL(DBG_PCDV,"EINVAL\n");
- return -EINVAL;
- }
- if (s_pcd == 0) {
- DWC_DEBUGPL(DBG_PCDV,"ENODEV\n");
- return -ENODEV;
- }
- if (s_pcd->driver != 0) {
- DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver);
- return -EBUSY;
- }
-
- /* hook up the driver */
- s_pcd->driver = driver;
- s_pcd->gadget.dev.driver = &driver->driver;
-
- DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
- retval = d_bind(&s_pcd->gadget);
- if (retval) {
- DWC_ERROR("bind to driver %s --> error %d\n",
- driver->driver.name, retval);
- s_pcd->driver = 0;
- s_pcd->gadget.dev.driver = 0;
- return retval;
- }
- DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
- driver->driver.name);
- return 0;
-}
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
-EXPORT_SYMBOL(usb_gadget_probe_driver);
-#else
-EXPORT_SYMBOL(usb_gadget_register_driver);
-#endif
-
-/**
- * This function unregisters a gadget driver
- *
- * @param driver The driver being unregistered
- */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-{
- //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
-
- if (s_pcd == 0) {
- DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
- -ENODEV);
- return -ENODEV;
- }
- if (driver == 0 || driver != s_pcd->driver) {
- DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
- -EINVAL);
- return -EINVAL;
- }
-
- driver->unbind(&s_pcd->gadget);
- s_pcd->driver = 0;
-
- DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n",
- driver->driver.name);
- return 0;
-}
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
-#endif /* DWC_HOST_ONLY */
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h
deleted file mode 100644
index 48de957840..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1103515 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_HOST_ONLY
-#if !defined(__DWC_PCD_H__)
-#define __DWC_PCD_H__
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-# include <linux/usb/ch9.h>
-#else
-# include <linux/usb_ch9.h>
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-#include <linux/usb/gadget.h>
-#else
-#include <linux/usb_gadget.h>
-#endif
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-struct dwc_otg_device;
-
-#include "dwc_otg_cil.h"
-
-/**
- * @file
- *
- * This file contains the structures, constants, and interfaces for
- * the Perpherial Contoller Driver (PCD).
- *
- * The Peripheral Controller Driver (PCD) for Linux will implement the
- * Gadget API, so that the existing Gadget drivers can be used. For
- * the Mass Storage Function driver the File-backed USB Storage Gadget
- * (FBS) driver will be used. The FBS driver supports the
- * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
- * transports.
- *
- */
-
-/** Invalid DMA Address */
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-/** Maxpacket size for EP0 */
-#define MAX_EP0_SIZE 64
-/** Maxpacket size for any EP */
-#define MAX_PACKET_SIZE 1024
-
-/** Max Transfer size for any EP */
-#define MAX_TRANSFER_SIZE 65535
-
-/** Max DMA Descriptor count for any EP */
-#define MAX_DMA_DESC_CNT 64
-
-/**
- * Get the pointer to the core_if from the pcd pointer.
- */
-#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if)
-
-/**
- * States of EP0.
- */
-typedef enum ep0_state
-{
- EP0_DISCONNECT, /* no host */
- EP0_IDLE,
- EP0_IN_DATA_PHASE,
- EP0_OUT_DATA_PHASE,
- EP0_IN_STATUS_PHASE,
- EP0_OUT_STATUS_PHASE,
- EP0_STALL,
-} ep0state_e;
-
-/** Fordward declaration.*/
-struct dwc_otg_pcd;
-
-/** DWC_otg iso request structure.
- *
- */
-typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
-
-/** PCD EP structure.
- * This structure describes an EP, there is an array of EPs in the PCD
- * structure.
- */
-typedef struct dwc_otg_pcd_ep
-{
- /** USB EP data */
- struct usb_ep ep;
- /** USB EP Descriptor */
- const struct usb_endpoint_descriptor *desc;
-
- /** queue of dwc_otg_pcd_requests. */
- struct list_head queue;
- unsigned stopped : 1;
- unsigned disabling : 1;
- unsigned dma : 1;
- unsigned queue_sof : 1;
-
-#ifdef DWC_EN_ISOC
- /** DWC_otg Isochronous Transfer */
- struct usb_iso_request* iso_req;
-#endif //DWC_EN_ISOC
-
- /** DWC_otg ep data. */
- dwc_ep_t dwc_ep;
-
- /** Pointer to PCD */
- struct dwc_otg_pcd *pcd;
-}dwc_otg_pcd_ep_t;
-
-
-
-/** DWC_otg PCD Structure.
- * This structure encapsulates the data for the dwc_otg PCD.
- */
-typedef struct dwc_otg_pcd
-{
- /** USB gadget */
- struct usb_gadget gadget;
- /** USB gadget driver pointer*/
- struct usb_gadget_driver *driver;
- /** The DWC otg device pointer. */
- struct dwc_otg_device *otg_dev;
-
- /** State of EP0 */
- ep0state_e ep0state;
- /** EP0 Request is pending */
- unsigned ep0_pending : 1;
- /** Indicates when SET CONFIGURATION Request is in process */
- unsigned request_config : 1;
- /** The state of the Remote Wakeup Enable. */
- unsigned remote_wakeup_enable : 1;
- /** The state of the B-Device HNP Enable. */
- unsigned b_hnp_enable : 1;
- /** The state of A-Device HNP Support. */
- unsigned a_hnp_support : 1;
- /** The state of the A-Device Alt HNP support. */
- unsigned a_alt_hnp_support : 1;
- /** Count of pending Requests */
- unsigned request_pending;
-
- /** SETUP packet for EP0
- * This structure is allocated as a DMA buffer on PCD initialization
- * with enough space for up to 3 setup packets.
- */
- union
- {
- struct usb_ctrlrequest req;
- uint32_t d32[2];
- } *setup_pkt;
-
- dma_addr_t setup_pkt_dma_handle;
-
- /** 2-byte dma buffer used to return status from GET_STATUS */
- uint16_t *status_buf;
- dma_addr_t status_buf_dma_handle;
-
- /** EP0 */
- dwc_otg_pcd_ep_t ep0;
-
- /** Array of IN EPs. */
- dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1];
- /** Array of OUT EPs. */
- dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1];
- /** number of valid EPs in the above array. */
-// unsigned num_eps : 4;
- spinlock_t lock;
- /** Timer for SRP. If it expires before SRP is successful
- * clear the SRP. */
- struct timer_list srp_timer;
-
- /** Tasklet to defer starting of TEST mode transmissions until
- * Status Phase has been completed.
- */
- struct tasklet_struct test_mode_tasklet;
-
- /** Tasklet to delay starting of xfer in DMA mode */
- struct tasklet_struct *start_xfer_tasklet;
-
- /** The test mode to enter when the tasklet is executed. */
- unsigned test_mode;
-
-} dwc_otg_pcd_t;
-
-
-/** DWC_otg request structure.
- * This structure is a list of requests.
- */
-typedef struct
-{
- struct usb_request req; /**< USB Request. */
- struct list_head queue; /**< queue of these requests. */
-} dwc_otg_pcd_request_t;
-
-
-extern int dwc_otg_pcd_init(struct device *dev);
-
-//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev );
-extern void dwc_otg_pcd_remove( struct device *dev);
-extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd );
-extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd );
-
-extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd);
-extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set);
-
-extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req);
-extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req,
- int status);
-extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep);
-extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd,
- const unsigned reset);
-
-#endif
-#endif /* DWC_HOST_ONLY */
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
deleted file mode 100644
index fd44fd89c3..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
+++ /dev/null
@@ -1,3654 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1115682 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_HOST_ONLY
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/version.h>
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_pcd.h"
-
-
-#define DEBUG_EP0
-
-/* request functions defined in "dwc_otg_pcd.c" */
-
-/** @file
- * This file contains the implementation of the PCD Interrupt handlers.
- *
- * The PCD handles the device interrupts. Many conditions can cause a
- * device interrupt. When an interrupt occurs, the device interrupt
- * service routine determines the cause of the interrupt and
- * dispatches handling to the appropriate function. These interrupt
- * handling functions are described below.
- * All interrupt registers are processed from LSB to MSB.
- */
-
-
-/**
- * This function prints the ep0 state for debug purposes.
- */
-static inline void print_ep0_state(dwc_otg_pcd_t *pcd)
-{
-#ifdef DEBUG
- char str[40];
-
- switch (pcd->ep0state) {
- case EP0_DISCONNECT:
- strcpy(str, "EP0_DISCONNECT");
- break;
- case EP0_IDLE:
- strcpy(str, "EP0_IDLE");
- break;
- case EP0_IN_DATA_PHASE:
- strcpy(str, "EP0_IN_DATA_PHASE");
- break;
- case EP0_OUT_DATA_PHASE:
- strcpy(str, "EP0_OUT_DATA_PHASE");
- break;
- case EP0_IN_STATUS_PHASE:
- strcpy(str,"EP0_IN_STATUS_PHASE");
- break;
- case EP0_OUT_STATUS_PHASE:
- strcpy(str,"EP0_OUT_STATUS_PHASE");
- break;
- case EP0_STALL:
- strcpy(str,"EP0_STALL");
- break;
- default:
- strcpy(str,"EP0_INVALID");
- }
-
- DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
-#endif
-}
-
-/**
- * This function returns pointer to in ep struct with number ep_num
- */
-static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-{
- int i;
- int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
- if(ep_num == 0) {
- return &pcd->ep0;
- }
- else {
- for(i = 0; i < num_in_eps; ++i)
- {
- if(pcd->in_ep[i].dwc_ep.num == ep_num)
- return &pcd->in_ep[i];
- }
- return 0;
- }
-}
-/**
- * This function returns pointer to out ep struct with number ep_num
- */
-static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-{
- int i;
- int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
- if(ep_num == 0) {
- return &pcd->ep0;
- }
- else {
- for(i = 0; i < num_out_eps; ++i)
- {
- if(pcd->out_ep[i].dwc_ep.num == ep_num)
- return &pcd->out_ep[i];
- }
- return 0;
- }
-}
-/**
- * This functions gets a pointer to an EP from the wIndex address
- * value of the control request.
- */
-static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex)
-{
- dwc_otg_pcd_ep_t *ep;
-
- if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
- return &pcd->ep0;
- list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list)
- {
- u8 bEndpointAddress;
-
- if (!ep->desc)
- continue;
-
- bEndpointAddress = ep->desc->bEndpointAddress;
- if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))
- == (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)))
- return ep;
- }
- return NULL;
-}
-
-/**
- * This function checks the EP request queue, if the queue is not
- * empty the next request is started.
- */
-void start_next_request(dwc_otg_pcd_ep_t *ep)
-{
- dwc_otg_pcd_request_t *req = 0;
- uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-
- if (!list_empty(&ep->queue)) {
- req = list_entry(ep->queue.next,
- dwc_otg_pcd_request_t, queue);
-
- /* Setup and start the Transfer */
- ep->dwc_ep.dma_addr = req->req.dma;
- ep->dwc_ep.start_xfer_buff = req->req.buf;
- ep->dwc_ep.xfer_buff = req->req.buf;
- ep->dwc_ep.sent_zlp = 0;
- ep->dwc_ep.total_len = req->req.length;
- ep->dwc_ep.xfer_len = 0;
- ep->dwc_ep.xfer_count = 0;
-
- if(max_transfer > MAX_TRANSFER_SIZE) {
- ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
- } else {
- ep->dwc_ep.maxxfer = max_transfer;
- }
-
- if(req->req.zero) {
- if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
- && (ep->dwc_ep.total_len != 0)) {
- ep->dwc_ep.sent_zlp = 1;
- }
-
- }
-
- dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
- }
-}
-
-/**
- * This function handles the SOF Interrupts. At this time the SOF
- * Interrupt is disabled.
- */
-int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-
- gintsts_data_t gintsts;
-
- DWC_DEBUGPL(DBG_PCD, "SOF\n");
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.sofintr = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-
-/**
- * This function handles the Rx Status Queue Level Interrupt, which
- * indicates that there is a least one packet in the Rx FIFO. The
- * packets are moved from the FIFO to memory, where they will be
- * processed when the Endpoint Interrupt Register indicates Transfer
- * Complete or SETUP Phase Done.
- *
- * Repeat the following until the Rx Status Queue is empty:
- * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
- * info
- * -# If Receive FIFO is empty then skip to step Clear the interrupt
- * and exit
- * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
- * SETUP data to the buffer
- * -# If OUT Data Packet call dwc_otg_read_packet to copy the data
- * to the destination buffer
- */
-int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
- gintmsk_data_t gintmask = {.d32=0};
- device_grxsts_data_t status;
- dwc_otg_pcd_ep_t *ep;
- gintsts_data_t gintsts;
-#ifdef DEBUG
- static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" };
-#endif
-
- //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
- /* Disable the Rx Status Queue Level interrupt */
- gintmask.b.rxstsqlvl= 1;
- dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0);
-
- /* Get the Status from the top of the FIFO */
- status.d32 = dwc_read_reg32(&global_regs->grxstsp);
-
- DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
- "pktsts:%x Frame:%d(0x%0x)\n",
- status.b.epnum, status.b.bcnt,
- dpid_str[status.b.dpid],
- status.b.pktsts, status.b.fn, status.b.fn);
- /* Get pointer to EP structure */
- ep = get_out_ep(pcd, status.b.epnum);
-
- switch (status.b.pktsts) {
- case DWC_DSTS_GOUT_NAK:
- DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
- break;
- case DWC_STS_DATA_UPDT:
- DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
- if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
- /** @todo NGS Check for buffer overflow? */
- dwc_otg_read_packet(core_if,
- ep->dwc_ep.xfer_buff,
- status.b.bcnt);
- ep->dwc_ep.xfer_count += status.b.bcnt;
- ep->dwc_ep.xfer_buff += status.b.bcnt;
- }
- break;
- case DWC_STS_XFER_COMP:
- DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
- break;
- case DWC_DSTS_SETUP_COMP:
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
-#endif
- break;
-case DWC_DSTS_SETUP_UPDT:
- dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCD,
- "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
- pcd->setup_pkt->req.bRequestType,
- pcd->setup_pkt->req.bRequest,
- pcd->setup_pkt->req.wValue,
- pcd->setup_pkt->req.wIndex,
- pcd->setup_pkt->req.wLength);
-#endif
- ep->dwc_ep.xfer_count += status.b.bcnt;
- break;
- default:
- DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
- status.b.pktsts);
- break;
- }
-
- /* Enable the Rx Status Queue Level interrupt */
- dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32);
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.rxstsqlvl = 1;
- dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-
- //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
- return 1;
-}
-/**
- * This function examines the Device IN Token Learning Queue to
- * determine the EP number of the last IN token received. This
- * implementation is for the Mass Storage device where there are only
- * 2 IN EPs (Control-IN and BULK-IN).
- *
- * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
- * are 8 EP Numbers in each of the other possible DTKNQ Registers.
- *
- * @param core_if Programming view of DWC_otg controller.
- *
- */
-static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if)
-{
- dwc_otg_device_global_regs_t *dev_global_regs =
- core_if->dev_if->dev_global_regs;
- const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
- /* Number of Token Queue Registers */
- const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
- dtknq1_data_t dtknqr1;
- uint32_t in_tkn_epnums[4];
- int ndx = 0;
- int i = 0;
- volatile uint32_t *addr = &dev_global_regs->dtknqr1;
- int epnum = 0;
-
- //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
-
-
- /* Read the DTKNQ Registers */
- for (i = 0; i < DTKNQ_REG_CNT; i++)
- {
- in_tkn_epnums[ i ] = dwc_read_reg32(addr);
- DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1,
- in_tkn_epnums[i]);
- if (addr == &dev_global_regs->dvbusdis) {
- addr = &dev_global_regs->dtknqr3_dthrctl;
- }
- else {
- ++addr;
- }
-
- }
-
- /* Copy the DTKNQR1 data to the bit field. */
- dtknqr1.d32 = in_tkn_epnums[0];
- /* Get the EP numbers */
- in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
- ndx = dtknqr1.b.intknwptr - 1;
-
- //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
- if (ndx == -1) {
- /** @todo Find a simpler way to calculate the max
- * queue position.*/
- int cnt = TOKEN_Q_DEPTH;
- if (TOKEN_Q_DEPTH <= 6) {
- cnt = TOKEN_Q_DEPTH - 1;
- }
- else if (TOKEN_Q_DEPTH <= 14) {
- cnt = TOKEN_Q_DEPTH - 7;
- }
- else if (TOKEN_Q_DEPTH <= 22) {
- cnt = TOKEN_Q_DEPTH - 15;
- }
- else {
- cnt = TOKEN_Q_DEPTH - 23;
- }
- epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF;
- }
- else {
- if (ndx <= 5) {
- epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
- }
- else if (ndx <= 13) {
- ndx -= 6;
- epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
- }
- else if (ndx <= 21) {
- ndx -= 14;
- epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
- }
- else if (ndx <= 29) {
- ndx -= 22;
- epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
- }
- }
- //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
- return epnum;
-}
-
-/**
- * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
- * The active request is checked for the next packet to be loaded into
- * the non-periodic Tx FIFO.
- */
-int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
- dwc_otg_dev_in_ep_regs_t *ep_regs;
- gnptxsts_data_t txstatus = {.d32 = 0};
- gintsts_data_t gintsts;
-
- int epnum = 0;
- dwc_otg_pcd_ep_t *ep = 0;
- uint32_t len = 0;
- int dwords;
-
- /* Get the epnum from the IN Token Learning Queue. */
- epnum = get_ep_of_last_in_token(core_if);
- ep = get_in_ep(pcd, epnum);
-
- DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
- ep_regs = core_if->dev_if->in_ep_regs[epnum];
-
- len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
- if (len > ep->dwc_ep.maxpacket) {
- len = ep->dwc_ep.maxpacket;
- }
- dwords = (len + 3)/4;
-
-
- /* While there is space in the queue and space in the FIFO and
- * More data to tranfer, Write packets to the Tx FIFO */
- txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32);
-
- while (txstatus.b.nptxqspcavail > 0 &&
- txstatus.b.nptxfspcavail > dwords &&
- ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
- /* Write the FIFO */
- dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
- len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-
- if (len > ep->dwc_ep.maxpacket) {
- len = ep->dwc_ep.maxpacket;
- }
-
- dwords = (len + 3)/4;
- txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32);
- }
-
- DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
- dwc_read_reg32(&global_regs->gnptxsts));
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.nptxfempty = 1;
- dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This function is called when dedicated Tx FIFO Empty interrupt occurs.
- * The active request is checked for the next packet to be loaded into
- * apropriate Tx FIFO.
- */
-static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_dev_if_t* dev_if = core_if->dev_if;
- dwc_otg_dev_in_ep_regs_t *ep_regs;
- dtxfsts_data_t txstatus = {.d32 = 0};
- dwc_otg_pcd_ep_t *ep = 0;
- uint32_t len = 0;
- int dwords;
-
- ep = get_in_ep(pcd, epnum);
-
- DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
-
- ep_regs = core_if->dev_if->in_ep_regs[epnum];
-
- len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-
- if (len > ep->dwc_ep.maxpacket) {
- len = ep->dwc_ep.maxpacket;
- }
-
- dwords = (len + 3)/4;
-
- /* While there is space in the queue and space in the FIFO and
- * More data to tranfer, Write packets to the Tx FIFO */
- txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
- DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32);
-
- while (txstatus.b.txfspcavail > dwords &&
- ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
- ep->dwc_ep.xfer_len != 0) {
- /* Write the FIFO */
- dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-
- len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
- if (len > ep->dwc_ep.maxpacket) {
- len = ep->dwc_ep.maxpacket;
- }
-
- dwords = (len + 3)/4;
- txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
- DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
- }
-
- DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts));
-
- return 1;
-}
-
-
-/**
- * This function is called when the Device is disconnected. It stops
- * any active requests and informs the Gadget driver of the
- * disconnect.
- */
-void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd)
-{
- int i, num_in_eps, num_out_eps;
- dwc_otg_pcd_ep_t *ep;
-
- gintmsk_data_t intr_mask = {.d32 = 0};
-
- num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
- num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-
- DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
- /* don't disconnect drivers more than once */
- if (pcd->ep0state == EP0_DISCONNECT) {
- DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
- return;
- }
- pcd->ep0state = EP0_DISCONNECT;
-
- /* Reset the OTG state. */
- dwc_otg_pcd_update_otg(pcd, 1);
-
- /* Disable the NP Tx Fifo Empty Interrupt. */
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-
- /* Flush the FIFOs */
- /**@todo NGS Flush Periodic FIFOs */
- dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
- dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
-
- /* prevent new request submissions, kill any outstanding requests */
- ep = &pcd->ep0;
- dwc_otg_request_nuke(ep);
- /* prevent new request submissions, kill any outstanding requests */
- for (i = 0; i < num_in_eps; i++)
- {
- dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
- dwc_otg_request_nuke(ep);
- }
- /* prevent new request submissions, kill any outstanding requests */
- for (i = 0; i < num_out_eps; i++)
- {
- dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
- dwc_otg_request_nuke(ep);
- }
-
- /* report disconnect; the driver is already quiesced */
- if (pcd->driver && pcd->driver->disconnect) {
- SPIN_UNLOCK(&pcd->lock);
- pcd->driver->disconnect(&pcd->gadget);
- SPIN_LOCK(&pcd->lock);
- }
-}
-
-/**
- * This interrupt indicates that ...
- */
-int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd)
-{
- gintmsk_data_t intr_mask = { .d32 = 0};
- gintsts_data_t gintsts;
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr");
- intr_mask.b.i2cintr = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.i2cintr = 1;
- dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
- return 1;
-}
-
-
-/**
- * This interrupt indicates that ...
- */
-int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd)
-{
- gintsts_data_t gintsts;
-#if defined(VERBOSE)
- DWC_PRINT("Early Suspend Detected\n");
-#endif
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.erlysuspend = 1;
- dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
- return 1;
-}
-
-/**
- * This function configures EPO to receive SETUP packets.
- *
- * @todo NGS: Update the comments from the HW FS.
- *
- * -# Program the following fields in the endpoint specific registers
- * for Control OUT EP 0, in order to receive a setup packet
- * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
- * setup packets)
- * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
- * to back setup packets)
- * - In DMA mode, DOEPDMA0 Register with a memory address to
- * store any setup packets received
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param pcd Programming view of the PCD.
- */
-static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd)
-{
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- deptsiz0_data_t doeptsize0 = { .d32 = 0};
- dwc_otg_dma_desc_t* dma_desc;
- depctl_data_t doepctl = { .d32 = 0 };
-
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__,
- dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-#endif
-
- doeptsize0.b.supcnt = 3;
- doeptsize0.b.pktcnt = 1;
- doeptsize0.b.xfersize = 8*3;
-
-
- if (core_if->dma_enable) {
- if (!core_if->dma_desc_enable) {
- /** put here as for Hermes mode deptisz register should not be written */
- dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
- doeptsize0.d32);
-
- /** @todo dma needs to handle multiple setup packets (up to 3) */
- dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma,
- pcd->setup_pkt_dma_handle);
- } else {
- dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1;
- dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index];
-
- /** DMA Descriptor Setup */
- dma_desc->status.b.bs = BS_HOST_BUSY;
- dma_desc->status.b.l = 1;
- dma_desc->status.b.ioc = 1;
- dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
- dma_desc->buf = pcd->setup_pkt_dma_handle;
- dma_desc->status.b.bs = BS_HOST_READY;
-
- /** DOEPDMA0 Register write */
- dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
- }
-
- } else {
- /** put here as for Hermes mode deptisz register should not be written */
- dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
- doeptsize0.d32);
- }
-
- /** DOEPCTL0 Register write */
- doepctl.b.epena = 1;
- doepctl.b.cnak = 1;
- dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
- dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
- DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
- dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-#endif
-}
-
-
-/**
- * This interrupt occurs when a USB Reset is detected. When the USB
- * Reset Interrupt occurs the device state is set to DEFAULT and the
- * EP0 state is set to IDLE.
- * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
- * -# Unmask the following interrupt bits
- * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
- * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
- * - DOEPMSK.SETUP = 1
- * - DOEPMSK.XferCompl = 1
- * - DIEPMSK.XferCompl = 1
- * - DIEPMSK.TimeOut = 1
- * -# Program the following fields in the endpoint specific registers
- * for Control OUT EP 0, in order to receive a setup packet
- * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
- * setup packets)
- * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
- * to back setup packets)
- * - In DMA mode, DOEPDMA0 Register with a memory address to
- * store any setup packets received
- * At this point, all the required initialization, except for enabling
- * the control 0 OUT endpoint is done, for receiving SETUP packets.
- */
-int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- depctl_data_t doepctl = { .d32 = 0};
-
- daint_data_t daintmsk = { .d32 = 0};
- doepmsk_data_t doepmsk = { .d32 = 0};
- diepmsk_data_t diepmsk = { .d32 = 0};
-
- dcfg_data_t dcfg = { .d32=0 };
- grstctl_t resetctl = { .d32=0 };
- dctl_data_t dctl = {.d32=0};
- int i = 0;
- gintsts_data_t gintsts;
-
- DWC_PRINT("USB RESET\n");
-#ifdef DWC_EN_ISOC
- for(i = 1;i < 16; ++i)
- {
- dwc_otg_pcd_ep_t *ep;
- dwc_ep_t *dwc_ep;
- ep = get_in_ep(pcd,i);
- if(ep != 0){
- dwc_ep = &ep->dwc_ep;
- dwc_ep->next_frame = 0xffffffff;
- }
- }
-#endif /* DWC_EN_ISOC */
-
- /* reset the HNP settings */
- dwc_otg_pcd_update_otg(pcd, 1);
-
- /* Clear the Remote Wakeup Signalling */
- dctl.b.rmtwkupsig = 1;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
- dctl.d32, 0);
-
- /* Set NAK for all OUT EPs */
- doepctl.b.snak = 1;
- for (i=0; i <= dev_if->num_out_eps; i++)
- {
- dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl,
- doepctl.d32);
- }
-
- /* Flush the NP Tx FIFO */
- dwc_otg_flush_tx_fifo(core_if, 0x10);
- /* Flush the Learning Queue */
- resetctl.b.intknqflsh = 1;
- dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-
- if(core_if->multiproc_int_enable) {
- daintmsk.b.inep0 = 1;
- daintmsk.b.outep0 = 1;
- dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32);
-
- doepmsk.b.setup = 1;
- doepmsk.b.xfercompl = 1;
- doepmsk.b.ahberr = 1;
- doepmsk.b.epdisabled = 1;
-
- if(core_if->dma_desc_enable) {
- doepmsk.b.stsphsercvd = 1;
- doepmsk.b.bna = 1;
- }
-/*
- doepmsk.b.babble = 1;
- doepmsk.b.nyet = 1;
-
- if(core_if->dma_enable) {
- doepmsk.b.nak = 1;
- }
-*/
- dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32);
-
- diepmsk.b.xfercompl = 1;
- diepmsk.b.timeout = 1;
- diepmsk.b.epdisabled = 1;
- diepmsk.b.ahberr = 1;
- diepmsk.b.intknepmis = 1;
-
- if(core_if->dma_desc_enable) {
- diepmsk.b.bna = 1;
- }
-/*
- if(core_if->dma_enable) {
- diepmsk.b.nak = 1;
- }
-*/
- dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32);
- } else{
- daintmsk.b.inep0 = 1;
- daintmsk.b.outep0 = 1;
- dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32);
-
- doepmsk.b.setup = 1;
- doepmsk.b.xfercompl = 1;
- doepmsk.b.ahberr = 1;
- doepmsk.b.epdisabled = 1;
-
- if(core_if->dma_desc_enable) {
- doepmsk.b.stsphsercvd = 1;
- doepmsk.b.bna = 1;
- }
-/*
- doepmsk.b.babble = 1;
- doepmsk.b.nyet = 1;
- doepmsk.b.nak = 1;
-*/
- dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
-
- diepmsk.b.xfercompl = 1;
- diepmsk.b.timeout = 1;
- diepmsk.b.epdisabled = 1;
- diepmsk.b.ahberr = 1;
- diepmsk.b.intknepmis = 1;
-
- if(core_if->dma_desc_enable) {
- diepmsk.b.bna = 1;
- }
-
-// diepmsk.b.nak = 1;
-
- dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
- }
-
- /* Reset Device Address */
- dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
- dcfg.b.devaddr = 0;
- dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-
- /* setup EP0 to receive SETUP packets */
- ep0_out_start(core_if, pcd);
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.usbreset = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * Get the device speed from the device status register and convert it
- * to USB speed constant.
- *
- * @param core_if Programming view of DWC_otg controller.
- */
-static int get_device_speed(dwc_otg_core_if_t *core_if)
-{
- dsts_data_t dsts;
- enum usb_device_speed speed = USB_SPEED_UNKNOWN;
- dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-
- switch (dsts.b.enumspd) {
- case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
- speed = USB_SPEED_HIGH;
- break;
- case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
- case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
- speed = USB_SPEED_FULL;
- break;
-
- case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
- speed = USB_SPEED_LOW;
- break;
- }
-
- return speed;
-}
-
-/**
- * Read the device status register and set the device speed in the
- * data structure.
- * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
- */
-int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
- gintsts_data_t gintsts;
- gusbcfg_data_t gusbcfg;
- dwc_otg_core_global_regs_t *global_regs =
- GET_CORE_IF(pcd)->core_global_regs;
- uint8_t utmi16b, utmi8b;
- DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
-
- if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) {
- utmi16b = 6;
- utmi8b = 9;
- } else {
- utmi16b = 4;
- utmi8b = 8;
- }
- dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
-
-#ifdef DEBUG_EP0
- print_ep0_state(pcd);
-#endif
-
- if (pcd->ep0state == EP0_DISCONNECT) {
- pcd->ep0state = EP0_IDLE;
- }
- else if (pcd->ep0state == EP0_STALL) {
- pcd->ep0state = EP0_IDLE;
- }
-
- pcd->ep0state = EP0_IDLE;
-
- ep0->stopped = 0;
-
- pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd));
-
- /* Set USB turnaround time based on device speed and PHY interface. */
- gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- if (pcd->gadget.speed == USB_SPEED_HIGH) {
- if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
- /* ULPI interface */
- gusbcfg.b.usbtrdtim = 9;
- }
- if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
- /* UTMI+ interface */
- if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
- gusbcfg.b.usbtrdtim = utmi8b;
- }
- else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) {
- gusbcfg.b.usbtrdtim = utmi16b;
- }
- else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) {
- gusbcfg.b.usbtrdtim = utmi8b;
- }
- else {
- gusbcfg.b.usbtrdtim = utmi16b;
- }
- }
- if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
- /* UTMI+ OR ULPI interface */
- if (gusbcfg.b.ulpi_utmi_sel == 1) {
- /* ULPI interface */
- gusbcfg.b.usbtrdtim = 9;
- }
- else {
- /* UTMI+ interface */
- if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) {
- gusbcfg.b.usbtrdtim = utmi16b;
- }
- else {
- gusbcfg.b.usbtrdtim = utmi8b;
- }
- }
- }
- }
- else {
- /* Full or low speed */
- gusbcfg.b.usbtrdtim = 9;
- }
- dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32);
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.enumdone = 1;
- dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
- return 1;
-}
-
-/**
- * This interrupt indicates that the ISO OUT Packet was dropped due to
- * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs
- * read all the data from the Rx FIFO.
- */
-int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd)
-{
- gintmsk_data_t intr_mask = { .d32 = 0};
- gintsts_data_t gintsts;
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
- "ISOC Out Dropped");
-
- intr_mask.b.isooutdrop = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-
- /* Clear interrupt */
-
- gintsts.d32 = 0;
- gintsts.b.isooutdrop = 1;
- dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
-
- return 1;
-}
-
-/**
- * This interrupt indicates the end of the portion of the micro-frame
- * for periodic transactions. If there is a periodic transaction for
- * the next frame, load the packets into the EP periodic Tx FIFO.
- */
-int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd)
-{
- gintmsk_data_t intr_mask = { .d32 = 0};
- gintsts_data_t gintsts;
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP");
-
- intr_mask.b.eopframe = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.eopframe = 1;
- dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This interrupt indicates that EP of the packet on the top of the
- * non-periodic Tx FIFO does not match EP of the IN Token received.
- *
- * The "Device IN Token Queue" Registers are read to determine the
- * order the IN Tokens have been received. The non-periodic Tx FIFO
- * is flushed, so it can be reloaded in the order seen in the IN Token
- * Queue.
- */
-int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if)
-{
- gintsts_data_t gintsts;
- DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.epmismatch = 1;
- dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This funcion stalls EP0.
- */
-static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val)
-{
- dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
- struct usb_ctrlrequest *ctrl = &pcd->setup_pkt->req;
- DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
- ctrl->bRequestType, ctrl->bRequest, err_val);
-
- ep0->dwc_ep.is_in = 1;
- dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
- pcd->ep0.stopped = 1;
- pcd->ep0state = EP0_IDLE;
- ep0_out_start(GET_CORE_IF(pcd), pcd);
-}
-
-/**
- * This functions delegates the setup command to the gadget driver.
- */
-static inline void do_gadget_setup(dwc_otg_pcd_t *pcd,
- struct usb_ctrlrequest * ctrl)
-{
- int ret = 0;
- if (pcd->driver && pcd->driver->setup) {
- SPIN_UNLOCK(&pcd->lock);
- ret = pcd->driver->setup(&pcd->gadget, ctrl);
- SPIN_LOCK(&pcd->lock);
- if (ret < 0) {
- ep0_do_stall(pcd, ret);
- }
-
- /** @todo This is a g_file_storage gadget driver specific
- * workaround: a DELAYED_STATUS result from the fsg_setup
- * routine will result in the gadget queueing a EP0 IN status
- * phase for a two-stage control transfer. Exactly the same as
- * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
- * specific request. Need a generic way to know when the gadget
- * driver will queue the status phase. Can we assume when we
- * call the gadget driver setup() function that it will always
- * queue and require the following flag? Need to look into
- * this.
- */
-
- if (ret == 256 + 999) {
- pcd->request_config = 1;
- }
- }
-}
-
-/**
- * This function starts the Zero-Length Packet for the IN status phase
- * of a 2 stage control transfer.
- */
-static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
- if (pcd->ep0state == EP0_STALL) {
- return;
- }
-
- pcd->ep0state = EP0_IN_STATUS_PHASE;
-
- /* Prepare for more SETUP Packets */
- DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
- ep0->dwc_ep.xfer_len = 0;
- ep0->dwc_ep.xfer_count = 0;
- ep0->dwc_ep.is_in = 1;
- ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
- dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-
- /* Prepare for more SETUP Packets */
-// if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd);
-}
-
-/**
- * This function starts the Zero-Length Packet for the OUT status phase
- * of a 2 stage control transfer.
- */
-static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
- if (pcd->ep0state == EP0_STALL) {
- DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
- return;
- }
- pcd->ep0state = EP0_OUT_STATUS_PHASE;
-
- DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
- ep0->dwc_ep.xfer_len = 0;
- ep0->dwc_ep.xfer_count = 0;
- ep0->dwc_ep.is_in = 0;
- ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
- dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-
- /* Prepare for more SETUP Packets */
- if(GET_CORE_IF(pcd)->dma_enable == 0) {
- ep0_out_start(GET_CORE_IF(pcd), pcd);
- }
-}
-
-/**
- * Clear the EP halt (STALL) and if pending requests start the
- * transfer.
- */
-static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep)
-{
- if(ep->dwc_ep.stall_clear_flag == 0)
- dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-
- /* Reactive the EP */
- dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
- if (ep->stopped) {
- ep->stopped = 0;
- /* If there is a request in the EP queue start it */
-
- /** @todo FIXME: this causes an EP mismatch in DMA mode.
- * epmismatch not yet implemented. */
-
- /*
- * Above fixme is solved by implmenting a tasklet to call the
- * start_next_request(), outside of interrupt context at some
- * time after the current time, after a clear-halt setup packet.
- * Still need to implement ep mismatch in the future if a gadget
- * ever uses more than one endpoint at once
- */
- ep->queue_sof = 1;
- tasklet_schedule (pcd->start_xfer_tasklet);
- }
- /* Start Control Status Phase */
- do_setup_in_status_phase(pcd);
-}
-
-/**
- * This function is called when the SET_FEATURE TEST_MODE Setup packet
- * is sent from the host. The Device Control register is written with
- * the Test Mode bits set to the specified Test Mode. This is done as
- * a tasklet so that the "Status" phase of the control transfer
- * completes before transmitting the TEST packets.
- *
- * @todo This has not been tested since the tasklet struct was put
- * into the PCD struct!
- *
- */
-static void do_test_mode(unsigned long data)
-{
- dctl_data_t dctl;
- dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data;
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- int test_mode = pcd->test_mode;
-
-
-// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
-
- dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
- switch (test_mode) {
- case 1: // TEST_J
- dctl.b.tstctl = 1;
- break;
-
- case 2: // TEST_K
- dctl.b.tstctl = 2;
- break;
-
- case 3: // TEST_SE0_NAK
- dctl.b.tstctl = 3;
- break;
-
- case 4: // TEST_PACKET
- dctl.b.tstctl = 4;
- break;
-
- case 5: // TEST_FORCE_ENABLE
- dctl.b.tstctl = 5;
- break;
- }
- dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-}
-
-/**
- * This function process the GET_STATUS Setup Commands.
- */
-static inline void do_get_status(dwc_otg_pcd_t *pcd)
-{
- struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
- dwc_otg_pcd_ep_t *ep;
- dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
- uint16_t *status = pcd->status_buf;
-
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCD,
- "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
- ctrl.bRequestType, ctrl.bRequest,
- ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-#endif
-
- switch (ctrl.bRequestType & USB_RECIP_MASK) {
- case USB_RECIP_DEVICE:
- *status = 0x1; /* Self powered */
- *status |= pcd->remote_wakeup_enable << 1;
- break;
-
- case USB_RECIP_INTERFACE:
- *status = 0;
- break;
-
- case USB_RECIP_ENDPOINT:
- ep = get_ep_by_addr(pcd, ctrl.wIndex);
- if (ep == 0 || ctrl.wLength > 2) {
- ep0_do_stall(pcd, -EOPNOTSUPP);
- return;
- }
- /** @todo check for EP stall */
- *status = ep->stopped;
- break;
- }
- pcd->ep0_pending = 1;
- ep0->dwc_ep.start_xfer_buff = (uint8_t *)status;
- ep0->dwc_ep.xfer_buff = (uint8_t *)status;
- ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
- ep0->dwc_ep.xfer_len = 2;
- ep0->dwc_ep.xfer_count = 0;
- ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
- dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-}
-/**
- * This function process the SET_FEATURE Setup Commands.
- */
-static inline void do_set_feature(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
- struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
- dwc_otg_pcd_ep_t *ep = 0;
- int32_t otg_cap_param = core_if->core_params->otg_cap;
- gotgctl_data_t gotgctl = { .d32 = 0 };
-
- DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
- ctrl.bRequestType, ctrl.bRequest,
- ctrl.wValue, ctrl.wIndex, ctrl.wLength);
- DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param);
-
-
- switch (ctrl.bRequestType & USB_RECIP_MASK) {
- case USB_RECIP_DEVICE:
- switch (ctrl.wValue) {
- case USB_DEVICE_REMOTE_WAKEUP:
- pcd->remote_wakeup_enable = 1;
- break;
-
- case USB_DEVICE_TEST_MODE:
- /* Setup the Test Mode tasklet to do the Test
- * Packet generation after the SETUP Status
- * phase has completed. */
-
- /** @todo This has not been tested since the
- * tasklet struct was put into the PCD
- * struct! */
- pcd->test_mode_tasklet.next = 0;
- pcd->test_mode_tasklet.state = 0;
- atomic_set(&pcd->test_mode_tasklet.count, 0);
- pcd->test_mode_tasklet.func = do_test_mode;
- pcd->test_mode_tasklet.data = (unsigned long)pcd;
- pcd->test_mode = ctrl.wIndex >> 8;
- tasklet_schedule(&pcd->test_mode_tasklet);
- break;
-
- case USB_DEVICE_B_HNP_ENABLE:
- DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
-
- /* dev may initiate HNP */
- if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
- pcd->b_hnp_enable = 1;
- dwc_otg_pcd_update_otg(pcd, 0);
- DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
- /**@todo Is the gotgctl.devhnpen cleared
- * by a USB Reset? */
- gotgctl.b.devhnpen = 1;
- gotgctl.b.hnpreq = 1;
- dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32);
- }
- else {
- ep0_do_stall(pcd, -EOPNOTSUPP);
- }
- break;
-
- case USB_DEVICE_A_HNP_SUPPORT:
- /* RH port supports HNP */
- DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
- if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
- pcd->a_hnp_support = 1;
- dwc_otg_pcd_update_otg(pcd, 0);
- }
- else {
- ep0_do_stall(pcd, -EOPNOTSUPP);
- }
- break;
-
- case USB_DEVICE_A_ALT_HNP_SUPPORT:
- /* other RH port does */
- DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
- if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
- pcd->a_alt_hnp_support = 1;
- dwc_otg_pcd_update_otg(pcd, 0);
- }
- else {
- ep0_do_stall(pcd, -EOPNOTSUPP);
- }
- break;
- }
- do_setup_in_status_phase(pcd);
- break;
-
- case USB_RECIP_INTERFACE:
- do_gadget_setup(pcd, &ctrl);
- break;
-
- case USB_RECIP_ENDPOINT:
- if (ctrl.wValue == USB_ENDPOINT_HALT) {
- ep = get_ep_by_addr(pcd, ctrl.wIndex);
- if (ep == 0) {
- ep0_do_stall(pcd, -EOPNOTSUPP);
- return;
- }
- ep->stopped = 1;
- dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
- }
- do_setup_in_status_phase(pcd);
- break;
- }
-}
-
-/**
- * This function process the CLEAR_FEATURE Setup Commands.
- */
-static inline void do_clear_feature(dwc_otg_pcd_t *pcd)
-{
- struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
- dwc_otg_pcd_ep_t *ep = 0;
-
- DWC_DEBUGPL(DBG_PCD,
- "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
- ctrl.bRequestType, ctrl.bRequest,
- ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-
- switch (ctrl.bRequestType & USB_RECIP_MASK) {
- case USB_RECIP_DEVICE:
- switch (ctrl.wValue) {
- case USB_DEVICE_REMOTE_WAKEUP:
- pcd->remote_wakeup_enable = 0;
- break;
-
- case USB_DEVICE_TEST_MODE:
- /** @todo Add CLEAR_FEATURE for TEST modes. */
- break;
- }
- do_setup_in_status_phase(pcd);
- break;
-
- case USB_RECIP_ENDPOINT:
- ep = get_ep_by_addr(pcd, ctrl.wIndex);
- if (ep == 0) {
- ep0_do_stall(pcd, -EOPNOTSUPP);
- return;
- }
-
- pcd_clear_halt(pcd, ep);
-
- break;
- }
-}
-
-/**
- * This function process the SET_ADDRESS Setup Commands.
- */
-static inline void do_set_address(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
- struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-
- if (ctrl.bRequestType == USB_RECIP_DEVICE) {
- dcfg_data_t dcfg = {.d32=0};
-
-#ifdef DEBUG_EP0
-// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
-#endif
- dcfg.b.devaddr = ctrl.wValue;
- dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
- do_setup_in_status_phase(pcd);
- }
-}
-
-/**
- * This function processes SETUP commands. In Linux, the USB Command
- * processing is done in two places - the first being the PCD and the
- * second in the Gadget Driver (for example, the File-Backed Storage
- * Gadget Driver).
- *
- * <table>
- * <tr><td>Command </td><td>Driver </td><td>Description</td></tr>
- *
- * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
- * defined in chapter 9 of the USB 2.0 Specification chapter 9
- * </td></tr>
- *
- * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
- * requests are the ENDPOINT_HALT feature is procesed, all others the
- * interface requests are ignored.</td></tr>
- *
- * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
- * requests are processed by the PCD. Interface requests are passed
- * to the Gadget Driver.</td></tr>
- *
- * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
- * with device address received </td></tr>
- *
- * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
- * requested descriptor</td></tr>
- *
- * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
- * not implemented by any of the existing Gadget Drivers.</td></tr>
- *
- * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
- * all EPs and enable EPs for new configuration.</td></tr>
- *
- * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
- * the current configuration</td></tr>
- *
- * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
- * EPs and enable EPs for new configuration.</td></tr>
- *
- * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
- * current interface.</td></tr>
- *
- * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
- * message.</td></tr>
- * </table>
- *
- * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
- * processed by pcd_setup. Calling the Function Driver's setup function from
- * pcd_setup processes the gadget SETUP commands.
- */
-static inline void pcd_setup(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
- dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-
- deptsiz0_data_t doeptsize0 = { .d32 = 0};
-
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
- ctrl.bRequestType, ctrl.bRequest,
- ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-#endif
-
- doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz);
-
- /** @todo handle > 1 setup packet , assert error for now */
-
- if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) {
- DWC_ERROR ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n");
- }
-
- /* Clean up the request queue */
- dwc_otg_request_nuke(ep0);
- ep0->stopped = 0;
-
- if (ctrl.bRequestType & USB_DIR_IN) {
- ep0->dwc_ep.is_in = 1;
- pcd->ep0state = EP0_IN_DATA_PHASE;
- }
- else {
- ep0->dwc_ep.is_in = 0;
- pcd->ep0state = EP0_OUT_DATA_PHASE;
- }
-
- if(ctrl.wLength == 0) {
- ep0->dwc_ep.is_in = 1;
- pcd->ep0state = EP0_IN_STATUS_PHASE;
- }
-
- if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
- /* handle non-standard (class/vendor) requests in the gadget driver */
- do_gadget_setup(pcd, &ctrl);
- return;
- }
-
- /** @todo NGS: Handle bad setup packet? */
-
-///////////////////////////////////////////
-//// --- Standard Request handling --- ////
-
- switch (ctrl.bRequest) {
- case USB_REQ_GET_STATUS:
- do_get_status(pcd);
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- do_clear_feature(pcd);
- break;
-
- case USB_REQ_SET_FEATURE:
- do_set_feature(pcd);
- break;
-
- case USB_REQ_SET_ADDRESS:
- do_set_address(pcd);
- break;
-
- case USB_REQ_SET_INTERFACE:
- case USB_REQ_SET_CONFIGURATION:
-// _pcd->request_config = 1; /* Configuration changed */
- do_gadget_setup(pcd, &ctrl);
- break;
-
- case USB_REQ_SYNCH_FRAME:
- do_gadget_setup(pcd, &ctrl);
- break;
-
- default:
- /* Call the Gadget Driver's setup functions */
- do_gadget_setup(pcd, &ctrl);
- break;
- }
-}
-
-/**
- * This function completes the ep0 control transfer.
- */
-static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- dwc_otg_dev_in_ep_regs_t *in_ep_regs =
- dev_if->in_ep_regs[ep->dwc_ep.num];
-#ifdef DEBUG_EP0
- dwc_otg_dev_out_ep_regs_t *out_ep_regs =
- dev_if->out_ep_regs[ep->dwc_ep.num];
-#endif
- deptsiz0_data_t deptsiz;
- desc_sts_data_t desc_sts;
- dwc_otg_pcd_request_t *req;
- int is_last = 0;
- dwc_otg_pcd_t *pcd = ep->pcd;
-
- //DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name);
-
- if (pcd->ep0_pending && list_empty(&ep->queue)) {
- if (ep->dwc_ep.is_in) {
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
-#endif
- do_setup_out_status_phase(pcd);
- }
- else {
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
-#endif
- do_setup_in_status_phase(pcd);
- }
- pcd->ep0_pending = 0;
- return 1;
- }
-
- if (list_empty(&ep->queue)) {
- return 0;
- }
- req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue);
-
-
- if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) {
- is_last = 1;
- }
- else if (ep->dwc_ep.is_in) {
- deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
- if(core_if->dma_desc_enable != 0)
- desc_sts.d32 = readl(dev_if->in_desc_addr);
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
- ep->ep.name, ep->dwc_ep.xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
-#endif
-
- if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) ||
- ((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) {
- req->req.actual = ep->dwc_ep.xfer_count;
- /* Is a Zero Len Packet needed? */
- if (req->req.zero) {
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
-#endif
- req->req.zero = 0;
- }
- do_setup_out_status_phase(pcd);
- }
- }
- else {
- /* ep0-OUT */
-#ifdef DEBUG_EP0
- deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
- DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n",
- ep->ep.name, ep->dwc_ep.xfer_len,
- deptsiz.b.xfersize,
- deptsiz.b.pktcnt);
-#endif
- req->req.actual = ep->dwc_ep.xfer_count;
- /* Is a Zero Len Packet needed? */
- if (req->req.zero) {
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
-#endif
- req->req.zero = 0;
- }
- if(core_if->dma_desc_enable == 0)
- do_setup_in_status_phase(pcd);
- }
-
- /* Complete the request */
- if (is_last) {
- dwc_otg_request_done(ep, req, 0);
- ep->dwc_ep.start_xfer_buff = 0;
- ep->dwc_ep.xfer_buff = 0;
- ep->dwc_ep.xfer_len = 0;
- return 1;
- }
- return 0;
-}
-
-/**
- * This function completes the request for the EP. If there are
- * additional requests for the EP in the queue they will be started.
- */
-static void complete_ep(dwc_otg_pcd_ep_t *ep)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- dwc_otg_dev_in_ep_regs_t *in_ep_regs =
- dev_if->in_ep_regs[ep->dwc_ep.num];
- deptsiz_data_t deptsiz;
- desc_sts_data_t desc_sts;
- dwc_otg_pcd_request_t *req = 0;
- dwc_otg_dma_desc_t* dma_desc;
- uint32_t byte_count = 0;
- int is_last = 0;
- int i;
-
- DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name,
- (ep->dwc_ep.is_in?"IN":"OUT"));
-
- /* Get any pending requests */
- if (!list_empty(&ep->queue)) {
- req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
- queue);
- if (!req) {
- printk("complete_ep 0x%p, req = NULL!\n", ep);
- return;
- }
- }
- else {
- printk("complete_ep 0x%p, ep->queue empty!\n", ep);
- return;
- }
- DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
-
- if (ep->dwc_ep.is_in) {
- deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
-
- if (core_if->dma_enable) {
- if(core_if->dma_desc_enable == 0) {
- if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
- byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-
- ep->dwc_ep.xfer_buff += byte_count;
- ep->dwc_ep.dma_addr += byte_count;
- ep->dwc_ep.xfer_count += byte_count;
-
- DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
- ep->ep.name, ep->dwc_ep.xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
-
-
- if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
- dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
- } else if(ep->dwc_ep.sent_zlp) {
- /*
- * This fragment of code should initiate 0
- * length trasfer in case if it is queued
- * a trasfer with size divisible to EPs max
- * packet size and with usb_request zero field
- * is set, which means that after data is transfered,
- * it is also should be transfered
- * a 0 length packet at the end. For Slave and
- * Buffer DMA modes in this case SW has
- * to initiate 2 transfers one with transfer size,
- * and the second with 0 size. For Desriptor
- * DMA mode SW is able to initiate a transfer,
- * which will handle all the packets including
- * the last 0 legth.
- */
- ep->dwc_ep.sent_zlp = 0;
- dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
- } else {
- is_last = 1;
- }
- } else {
- DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
- ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
- }
- } else {
- dma_desc = ep->dwc_ep.desc_addr;
- byte_count = 0;
- ep->dwc_ep.sent_zlp = 0;
-
- for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
- desc_sts.d32 = readl(dma_desc);
- byte_count += desc_sts.b.bytes;
- dma_desc++;
- }
-
- if(byte_count == 0) {
- ep->dwc_ep.xfer_count = ep->dwc_ep.total_len;
- is_last = 1;
- } else {
- DWC_WARN("Incomplete transfer\n");
- }
- }
- } else {
- if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
- /* Check if the whole transfer was completed,
- * if no, setup transfer for next portion of data
- */
- DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
- ep->ep.name, ep->dwc_ep.xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
- if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
- dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
- } else if(ep->dwc_ep.sent_zlp) {
- /*
- * This fragment of code should initiate 0
- * length trasfer in case if it is queued
- * a trasfer with size divisible to EPs max
- * packet size and with usb_request zero field
- * is set, which means that after data is transfered,
- * it is also should be transfered
- * a 0 length packet at the end. For Slave and
- * Buffer DMA modes in this case SW has
- * to initiate 2 transfers one with transfer size,
- * and the second with 0 size. For Desriptor
- * DMA mode SW is able to initiate a transfer,
- * which will handle all the packets including
- * the last 0 legth.
- */
- ep->dwc_ep.sent_zlp = 0;
- dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
- } else {
- is_last = 1;
- }
- }
- else {
- DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
- ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
- deptsiz.b.xfersize, deptsiz.b.pktcnt);
- }
- }
- } else {
- dwc_otg_dev_out_ep_regs_t *out_ep_regs =
- dev_if->out_ep_regs[ep->dwc_ep.num];
- desc_sts.d32 = 0;
- if(core_if->dma_enable) {
- if(core_if->dma_desc_enable) {
- dma_desc = ep->dwc_ep.desc_addr;
- byte_count = 0;
- ep->dwc_ep.sent_zlp = 0;
- for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
- desc_sts.d32 = readl(dma_desc);
- byte_count += desc_sts.b.bytes;
- dma_desc++;
- }
-
- ep->dwc_ep.xfer_count = ep->dwc_ep.total_len
- - byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3);
- is_last = 1;
- } else {
- deptsiz.d32 = 0;
- deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
-
- byte_count = (ep->dwc_ep.xfer_len -
- ep->dwc_ep.xfer_count - deptsiz.b.xfersize);
- ep->dwc_ep.xfer_buff += byte_count;
- ep->dwc_ep.dma_addr += byte_count;
- ep->dwc_ep.xfer_count += byte_count;
-
- /* Check if the whole transfer was completed,
- * if no, setup transfer for next portion of data
- */
- if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
- dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
- }
- else if(ep->dwc_ep.sent_zlp) {
- /*
- * This fragment of code should initiate 0
- * length trasfer in case if it is queued
- * a trasfer with size divisible to EPs max
- * packet size and with usb_request zero field
- * is set, which means that after data is transfered,
- * it is also should be transfered
- * a 0 length packet at the end. For Slave and
- * Buffer DMA modes in this case SW has
- * to initiate 2 transfers one with transfer size,
- * and the second with 0 size. For Desriptor
- * DMA mode SW is able to initiate a transfer,
- * which will handle all the packets including
- * the last 0 legth.
- */
- ep->dwc_ep.sent_zlp = 0;
- dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
- } else {
- is_last = 1;
- }
- }
- } else {
- /* Check if the whole transfer was completed,
- * if no, setup transfer for next portion of data
- */
- if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
- dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
- }
- else if(ep->dwc_ep.sent_zlp) {
- /*
- * This fragment of code should initiate 0
- * length trasfer in case if it is queued
- * a trasfer with size divisible to EPs max
- * packet size and with usb_request zero field
- * is set, which means that after data is transfered,
- * it is also should be transfered
- * a 0 length packet at the end. For Slave and
- * Buffer DMA modes in this case SW has
- * to initiate 2 transfers one with transfer size,
- * and the second with 0 size. For Desriptor
- * DMA mode SW is able to initiate a transfer,
- * which will handle all the packets including
- * the last 0 legth.
- */
- ep->dwc_ep.sent_zlp = 0;
- dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
- } else {
- is_last = 1;
- }
- }
-
-#ifdef DEBUG
-
- DWC_DEBUGPL(DBG_PCDV, "addr %p, %s len=%d cnt=%d xsize=%d pktcnt=%d\n",
- &out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len,
- ep->dwc_ep.xfer_count,
- deptsiz.b.xfersize,
- deptsiz.b.pktcnt);
-#endif
- }
-
- /* Complete the request */
- if (is_last) {
- req->req.actual = ep->dwc_ep.xfer_count;
-
- dwc_otg_request_done(ep, req, 0);
-
- ep->dwc_ep.start_xfer_buff = 0;
- ep->dwc_ep.xfer_buff = 0;
- ep->dwc_ep.xfer_len = 0;
-
- /* If there is a request in the queue start it.*/
- start_next_request(ep);
- }
-}
-
-
-#ifdef DWC_EN_ISOC
-
-/**
- * This function BNA interrupt for Isochronous EPs
- *
- */
-static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep)
-{
- dwc_ep_t *dwc_ep = &ep->dwc_ep;
- volatile uint32_t *addr;
- depctl_data_t depctl = {.d32 = 0};
- dwc_otg_pcd_t *pcd = ep->pcd;
- dwc_otg_dma_desc_t *dma_desc;
- int i;
-
- dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
-
- if(dwc_ep->is_in) {
- desc_sts_data_t sts = {.d32 = 0};
- for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
- {
- sts.d32 = readl(&dma_desc->status);
- sts.b_iso_in.bs = BS_HOST_READY;
- writel(sts.d32,&dma_desc->status);
- }
- }
- else {
- desc_sts_data_t sts = {.d32 = 0};
- for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
- {
- sts.d32 = readl(&dma_desc->status);
- sts.b_iso_out.bs = BS_HOST_READY;
- writel(sts.d32,&dma_desc->status);
- }
- }
-
- if(dwc_ep->is_in == 0){
- addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
- }
- else{
- addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
- }
- depctl.b.epena = 1;
- dwc_modify_reg32(addr,depctl.d32,depctl.d32);
-}
-
-/**
- * This function sets latest iso packet information(non-PTI mode)
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- deptsiz_data_t deptsiz = { .d32 = 0 };
- dma_addr_t dma_addr;
- uint32_t offset;
-
- if(ep->proc_buf_num)
- dma_addr = ep->dma_addr1;
- else
- dma_addr = ep->dma_addr0;
-
-
- if(ep->is_in) {
- deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
- offset = ep->data_per_frame;
- } else {
- deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
- offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
- }
-
- if(!deptsiz.b.xfersize) {
- ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
- ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
- ep->pkt_info[ep->cur_pkt].status = 0;
- } else {
- ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
- ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
- ep->pkt_info[ep->cur_pkt].status = -ENODATA;
- }
- ep->cur_pkt_addr += offset;
- ep->cur_pkt_dma_addr += offset;
- ep->cur_pkt++;
-}
-
-/**
- * This function sets latest iso packet information(DDMA mode)
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP to start the transfer on.
- *
- */
-static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
- dwc_otg_dma_desc_t* dma_desc;
- desc_sts_data_t sts = {.d32 = 0};
- iso_pkt_info_t *iso_packet;
- uint32_t data_per_desc;
- uint32_t offset;
- int i, j;
-
- iso_packet = dwc_ep->pkt_info;
-
- /** Reinit closed DMA Descriptors*/
- /** ISO OUT EP */
- if(dwc_ep->is_in == 0) {
- dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
- offset = 0;
-
- for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
- {
- for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
- {
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-
- sts.d32 = readl(&dma_desc->status);
-
- /* Write status in iso_packet_decsriptor */
- iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
- if(iso_packet->status) {
- iso_packet->status = -ENODATA;
- }
-
- /* Received data length */
- if(!sts.b_iso_out.rxbytes){
- iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes;
- } else {
- iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes +
- (4 - dwc_ep->data_per_frame % 4);
- }
-
- iso_packet->offset = offset;
-
- offset += data_per_desc;
- dma_desc ++;
- iso_packet ++;
- }
- }
-
- for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
- {
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-
- sts.d32 = readl(&dma_desc->status);
-
- /* Write status in iso_packet_decsriptor */
- iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
- if(iso_packet->status) {
- iso_packet->status = -ENODATA;
- }
-
- /* Received data length */
- iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-
- iso_packet->offset = offset;
-
- offset += data_per_desc;
- iso_packet++;
- dma_desc++;
- }
-
- sts.d32 = readl(&dma_desc->status);
-
- /* Write status in iso_packet_decsriptor */
- iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
- if(iso_packet->status) {
- iso_packet->status = -ENODATA;
- }
- /* Received data length */
- if(!sts.b_iso_out.rxbytes){
- iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
- } else {
- iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
- (4 - dwc_ep->data_per_frame % 4);
- }
-
- iso_packet->offset = offset;
- }
- else /** ISO IN EP */
- {
- dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-
- for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
- {
- sts.d32 = readl(&dma_desc->status);
-
- /* Write status in iso packet descriptor */
- iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
- if(iso_packet->status != 0) {
- iso_packet->status = -ENODATA;
-
- }
- /* Bytes has been transfered */
- iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-
- dma_desc ++;
- iso_packet++;
- }
-
- sts.d32 = readl(&dma_desc->status);
- while(sts.b_iso_in.bs == BS_DMA_BUSY) {
- sts.d32 = readl(&dma_desc->status);
- }
-
- /* Write status in iso packet descriptor ??? do be done with ERROR codes*/
- iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
- if(iso_packet->status != 0) {
- iso_packet->status = -ENODATA;
- }
-
- /* Bytes has been transfered */
- iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
- }
-}
-
-/**
- * This function reinitialize DMA Descriptors for Isochronous transfer
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP to start the transfer on.
- *
- */
-static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
- int i, j;
- dwc_otg_dma_desc_t* dma_desc;
- dma_addr_t dma_ad;
- volatile uint32_t *addr;
- desc_sts_data_t sts = { .d32 =0 };
- uint32_t data_per_desc;
-
- if(dwc_ep->is_in == 0) {
- addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
- }
- else {
- addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
- }
-
-
- if(dwc_ep->proc_buf_num == 0) {
- /** Buffer 0 descriptors setup */
- dma_ad = dwc_ep->dma_addr0;
- }
- else {
- /** Buffer 1 descriptors setup */
- dma_ad = dwc_ep->dma_addr1;
- }
-
-
- /** Reinit closed DMA Descriptors*/
- /** ISO OUT EP */
- if(dwc_ep->is_in == 0) {
- dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-
- sts.b_iso_out.bs = BS_HOST_READY;
- sts.b_iso_out.rxsts = 0;
- sts.b_iso_out.l = 0;
- sts.b_iso_out.sp = 0;
- sts.b_iso_out.ioc = 0;
- sts.b_iso_out.pid = 0;
- sts.b_iso_out.framenum = 0;
-
- for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
- {
- for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
- {
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- (uint32_t)dma_ad += data_per_desc;
- dma_desc ++;
- }
- }
-
- for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
- {
-
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
-
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- dma_desc++;
- (uint32_t)dma_ad += data_per_desc;
- }
-
- sts.b_iso_out.ioc = 1;
- sts.b_iso_out.l = dwc_ep->proc_buf_num;
-
- data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
- dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
- data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
- sts.b_iso_out.rxbytes = data_per_desc;
-
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
- }
- else /** ISO IN EP */
- {
- dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-
- sts.b_iso_in.bs = BS_HOST_READY;
- sts.b_iso_in.txsts = 0;
- sts.b_iso_in.sp = 0;
- sts.b_iso_in.ioc = 0;
- sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
- sts.b_iso_in.framenum = dwc_ep->next_frame;
- sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
- sts.b_iso_in.l = 0;
-
- for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
- {
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- sts.b_iso_in.framenum += dwc_ep->bInterval;
- (uint32_t)dma_ad += dwc_ep->data_per_frame;
- dma_desc ++;
- }
-
- sts.b_iso_in.ioc = 1;
- sts.b_iso_in.l = dwc_ep->proc_buf_num;
-
- writel((uint32_t)dma_ad, &dma_desc->buf);
- writel(sts.d32, &dma_desc->status);
-
- dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
- }
- dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-}
-
-
-/**
- * This function is to handle Iso EP transfer complete interrupt
- * in case Iso out packet was dropped
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param dwc_ep The EP for wihich transfer complete was asserted
- *
- */
-static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-{
- uint32_t dma_addr;
- uint32_t drp_pkt;
- uint32_t drp_pkt_cnt;
- deptsiz_data_t deptsiz = { .d32 = 0 };
- depctl_data_t depctl = { .d32 = 0 };
- int i;
-
- deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
-
- drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
- drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
-
- /* Setting dropped packets status */
- for(i = 0; i < drp_pkt_cnt; ++i) {
- dwc_ep->pkt_info[drp_pkt].status = -ENODATA;
- drp_pkt ++;
- deptsiz.b.pktcnt--;
- }
-
-
- if(deptsiz.b.pktcnt > 0) {
- deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket;
- } else {
- deptsiz.b.xfersize = 0;
- deptsiz.b.pktcnt = 0;
- }
-
- dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32);
-
- if(deptsiz.b.pktcnt > 0) {
- if(dwc_ep->proc_buf_num) {
- dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize;
- } else {
- dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;;
- }
-
- dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
-
- /** Re-enable endpoint, clear nak */
- depctl.d32 = 0;
- depctl.b.epena = 1;
- depctl.b.cnak = 1;
-
- dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl,
- depctl.d32,depctl.d32);
- return 0;
- } else {
- return 1;
- }
-}
-
-/**
- * This function sets iso packets information(PTI mode)
- *
- * @param core_if Programming view of DWC_otg controller.
- * @param ep The EP to start the transfer on.
- *
- */
-static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-{
- int i, j;
- dma_addr_t dma_ad;
- iso_pkt_info_t *packet_info = ep->pkt_info;
- uint32_t offset;
- uint32_t frame_data;
- deptsiz_data_t deptsiz;
-
- if(ep->proc_buf_num == 0) {
- /** Buffer 0 descriptors setup */
- dma_ad = ep->dma_addr0;
- }
- else {
- /** Buffer 1 descriptors setup */
- dma_ad = ep->dma_addr1;
- }
-
-
- if(ep->is_in) {
- deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
- } else {
- deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
- }
-
- if(!deptsiz.b.xfersize) {
- offset = 0;
- for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm)
- {
- frame_data = ep->data_per_frame;
- for(j = 0; j < ep->pkt_per_frm; ++j) {
-
- /* Packet status - is not set as initially
- * it is set to 0 and if packet was sent
- successfully, status field will remain 0*/
-
-
- /* Bytes has been transfered */
- packet_info->length = (ep->maxpacket < frame_data) ?
- ep->maxpacket : frame_data;
-
- /* Received packet offset */
- packet_info->offset = offset;
- offset += packet_info->length;
- frame_data -= packet_info->length;
-
- packet_info ++;
- }
- }
- return 1;
- } else {
- /* This is a workaround for in case of Transfer Complete with
- * PktDrpSts interrupts merging - in this case Transfer complete
- * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
- * set and with DOEPTSIZ register non zero. Investigations showed,
- * that this happens when Out packet is dropped, but because of
- * interrupts merging during first interrupt handling PktDrpSts
- * bit is cleared and for next merged interrupts it is not reset.
- * In this case SW hadles the interrupt as if PktDrpSts bit is set.
- */
- if(ep->is_in) {
- return 1;
- } else {
- return handle_iso_out_pkt_dropped(core_if, ep);
- }
- }
-}
-
-/**
- * This function is to handle Iso EP transfer complete interrupt
- *
- * @param ep The EP for which transfer complete was asserted
- *
- */
-static void complete_iso_ep(dwc_otg_pcd_ep_t *ep)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
- dwc_ep_t *dwc_ep = &ep->dwc_ep;
- uint8_t is_last = 0;
-
- if(core_if->dma_enable) {
- if(core_if->dma_desc_enable) {
- set_ddma_iso_pkts_info(core_if, dwc_ep);
- reinit_ddma_iso_xfer(core_if, dwc_ep);
- is_last = 1;
- } else {
- if(core_if->pti_enh_enable) {
- if(set_iso_pkts_info(core_if, dwc_ep)) {
- dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
- dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep);
- is_last = 1;
- }
- } else {
- set_current_pkt_info(core_if, dwc_ep);
- if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
- is_last = 1;
- dwc_ep->cur_pkt = 0;
- dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
- if(dwc_ep->proc_buf_num) {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
- } else {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
- }
-
- }
- dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
- }
- }
- } else {
- set_current_pkt_info(core_if, dwc_ep);
- if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
- is_last = 1;
- dwc_ep->cur_pkt = 0;
- dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
- if(dwc_ep->proc_buf_num) {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
- } else {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
- }
-
- }
- dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
- }
- if(is_last)
- dwc_otg_iso_buffer_done(ep, ep->iso_req);
-}
-
-#endif //DWC_EN_ISOC
-
-
-/**
- * This function handles EP0 Control transfers.
- *
- * The state of the control tranfers are tracked in
- * <code>ep0state</code>.
- */
-static void handle_ep0(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
- desc_sts_data_t desc_sts;
- deptsiz0_data_t deptsiz;
- uint32_t byte_count;
-
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
- print_ep0_state(pcd);
-#endif
-
- switch (pcd->ep0state) {
- case EP0_DISCONNECT:
- break;
-
- case EP0_IDLE:
- pcd->request_config = 0;
-
- pcd_setup(pcd);
- break;
-
- case EP0_IN_DATA_PHASE:
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
- ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
- ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-#endif
-
- if (core_if->dma_enable != 0) {
- /*
- * For EP0 we can only program 1 packet at a time so we
- * need to do the make calculations after each complete.
- * Call write_packet to make the calculations, as in
- * slave mode, and use those values to determine if we
- * can complete.
- */
- if(core_if->dma_desc_enable == 0) {
- deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz);
- byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
- }
- else {
- desc_sts.d32 = readl(core_if->dev_if->in_desc_addr);
- byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
- }
- ep0->dwc_ep.xfer_count += byte_count;
- ep0->dwc_ep.xfer_buff += byte_count;
- ep0->dwc_ep.dma_addr += byte_count;
- }
- if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
- dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
- DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
- }
- else if(ep0->dwc_ep.sent_zlp) {
- dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
- ep0->dwc_ep.sent_zlp = 0;
- DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
- }
- else {
- ep0_complete_request(ep0);
- DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
- }
- break;
- case EP0_OUT_DATA_PHASE:
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
- ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
- ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-#endif
- if (core_if->dma_enable != 0) {
- if(core_if->dma_desc_enable == 0) {
- deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz);
- byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
- }
- else {
- desc_sts.d32 = readl(core_if->dev_if->out_desc_addr);
- byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
- }
- ep0->dwc_ep.xfer_count += byte_count;
- ep0->dwc_ep.xfer_buff += byte_count;
- ep0->dwc_ep.dma_addr += byte_count;
- }
- if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
- dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
- DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
- }
- else if(ep0->dwc_ep.sent_zlp) {
- dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
- ep0->dwc_ep.sent_zlp = 0;
- DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
- }
- else {
- ep0_complete_request(ep0);
- DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
- }
- break;
-
-
- case EP0_IN_STATUS_PHASE:
- case EP0_OUT_STATUS_PHASE:
- DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
- ep0_complete_request(ep0);
- pcd->ep0state = EP0_IDLE;
- ep0->stopped = 1;
- ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */
-
- /* Prepare for more SETUP Packets */
- if(core_if->dma_enable) {
- ep0_out_start(core_if, pcd);
- }
- break;
-
- case EP0_STALL:
- DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
- break;
- }
-#ifdef DEBUG_EP0
- print_ep0_state(pcd);
-#endif
-}
-
-
-/**
- * Restart transfer
- */
-static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum)
-{
- dwc_otg_core_if_t *core_if;
- dwc_otg_dev_if_t *dev_if;
- deptsiz_data_t dieptsiz = {.d32=0};
- dwc_otg_pcd_ep_t *ep;
-
- ep = get_in_ep(pcd, epnum);
-
-#ifdef DWC_EN_ISOC
- if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
- return;
- }
-#endif /* DWC_EN_ISOC */
-
- core_if = GET_CORE_IF(pcd);
- dev_if = core_if->dev_if;
-
- dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-
- DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x"
- " stopped=%d\n", ep->dwc_ep.xfer_buff,
- ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
- ep->stopped);
- /*
- * If xfersize is 0 and pktcnt in not 0, resend the last packet.
- */
- if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
- ep->dwc_ep.start_xfer_buff != 0) {
- if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
- ep->dwc_ep.xfer_count = 0;
- ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
- ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
- }
- else {
- ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
- /* convert packet size to dwords. */
- ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
- ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
- }
- ep->stopped = 0;
- DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x "
- "xfer_len=%0x stopped=%d\n",
- ep->dwc_ep.xfer_buff,
- ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
- ep->stopped
- );
- if (epnum == 0) {
- dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
- }
- else {
- dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
- }
- }
-}
-
-
-/**
- * handle the IN EP disable interrupt.
- */
-static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd,
- const uint32_t epnum)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- deptsiz_data_t dieptsiz = {.d32=0};
- dctl_data_t dctl = {.d32=0};
- dwc_otg_pcd_ep_t *ep;
- dwc_ep_t *dwc_ep;
-
- ep = get_in_ep(pcd, epnum);
- dwc_ep = &ep->dwc_ep;
-
- if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
- return;
- }
-
- DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum,
- dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl));
- dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-
- DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
- dieptsiz.b.pktcnt,
- dieptsiz.b.xfersize);
-
- if (ep->stopped) {
- /* Flush the Tx FIFO */
- dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
- /* Clear the Global IN NP NAK */
- dctl.d32 = 0;
- dctl.b.cgnpinnak = 1;
- dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
- dctl.d32, 0);
- /* Restart the transaction */
- if (dieptsiz.b.pktcnt != 0 ||
- dieptsiz.b.xfersize != 0) {
- restart_transfer(pcd, epnum);
- }
- }
- else {
- /* Restart the transaction */
- if (dieptsiz.b.pktcnt != 0 ||
- dieptsiz.b.xfersize != 0) {
- restart_transfer(pcd, epnum);
- }
- DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
- }
-}
-
-/**
- * Handler for the IN EP timeout handshake interrupt.
- */
-static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd,
- const uint32_t epnum)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-
-#ifdef DEBUG
- deptsiz_data_t dieptsiz = {.d32=0};
- uint32_t num = 0;
-#endif
- dctl_data_t dctl = {.d32=0};
- dwc_otg_pcd_ep_t *ep;
-
- gintmsk_data_t intr_mask = {.d32 = 0};
-
- ep = get_in_ep(pcd, epnum);
-
- /* Disable the NP Tx Fifo Empty Interrrupt */
- if (!core_if->dma_enable) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
- }
- /** @todo NGS Check EP type.
- * Implement for Periodic EPs */
- /*
- * Non-periodic EP
- */
- /* Enable the Global IN NAK Effective Interrupt */
- intr_mask.b.ginnakeff = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
- 0, intr_mask.d32);
-
- /* Set Global IN NAK */
- dctl.b.sgnpinnak = 1;
- dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
- dctl.d32, dctl.d32);
-
- ep->stopped = 1;
-
-#ifdef DEBUG
- dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz);
- DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
- dieptsiz.b.pktcnt,
- dieptsiz.b.xfersize);
-#endif
-
-#ifdef DISABLE_PERIODIC_EP
- /*
- * Set the NAK bit for this EP to
- * start the disable process.
- */
- diepctl.d32 = 0;
- diepctl.b.snak = 1;
- dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32);
- ep->disabling = 1;
- ep->stopped = 1;
-#endif
-}
-
-/**
- * Handler for the IN EP NAK interrupt.
- */
-static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd,
- const uint32_t epnum)
-{
- /** @todo implement ISR */
- dwc_otg_core_if_t* core_if;
- diepmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
- core_if = GET_CORE_IF(pcd);
- intr_mask.b.nak = 1;
-
- if(core_if->multiproc_int_enable) {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum],
- intr_mask.d32, 0);
- } else {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk,
- intr_mask.d32, 0);
- }
-
- return 1;
-}
-
-/**
- * Handler for the OUT EP Babble interrupt.
- */
-static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd,
- const uint32_t epnum)
-{
- /** @todo implement ISR */
- dwc_otg_core_if_t* core_if;
- doepmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble");
- core_if = GET_CORE_IF(pcd);
- intr_mask.b.babble = 1;
-
- if(core_if->multiproc_int_enable) {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
- intr_mask.d32, 0);
- } else {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
- intr_mask.d32, 0);
- }
-
- return 1;
-}
-
-/**
- * Handler for the OUT EP NAK interrupt.
- */
-static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd,
- const uint32_t epnum)
-{
- /** @todo implement ISR */
- dwc_otg_core_if_t* core_if;
- doepmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
- core_if = GET_CORE_IF(pcd);
- intr_mask.b.nak = 1;
-
- if(core_if->multiproc_int_enable) {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
- intr_mask.d32, 0);
- } else {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
- intr_mask.d32, 0);
- }
-
- return 1;
-}
-
-/**
- * Handler for the OUT EP NYET interrupt.
- */
-static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd,
- const uint32_t epnum)
-{
- /** @todo implement ISR */
- dwc_otg_core_if_t* core_if;
- doepmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
- core_if = GET_CORE_IF(pcd);
- intr_mask.b.nyet = 1;
-
- if(core_if->multiproc_int_enable) {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
- intr_mask.d32, 0);
- } else {
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
- intr_mask.d32, 0);
- }
-
- return 1;
-}
-
-/**
- * This interrupt indicates that an IN EP has a pending Interrupt.
- * The sequence for handling the IN EP interrupt is shown below:
- * -# Read the Device All Endpoint Interrupt register
- * -# Repeat the following for each IN EP interrupt bit set (from
- * LSB to MSB).
- * -# Read the Device Endpoint Interrupt (DIEPINTn) register
- * -# If "Transfer Complete" call the request complete function
- * -# If "Endpoint Disabled" complete the EP disable procedure.
- * -# If "AHB Error Interrupt" log error
- * -# If "Time-out Handshake" log error
- * -# If "IN Token Received when TxFIFO Empty" write packet to Tx
- * FIFO.
- * -# If "IN Token EP Mismatch" (disable, this is handled by EP
- * Mismatch Interrupt)
- */
-static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd)
-{
-#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
-do { \
- diepint_data_t diepint = {.d32=0}; \
- diepint.b.__intr = 1; \
- dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
- diepint.d32); \
-} while (0)
-
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- diepint_data_t diepint = {.d32=0};
- dctl_data_t dctl = {.d32=0};
- depctl_data_t depctl = {.d32=0};
- uint32_t ep_intr;
- uint32_t epnum = 0;
- dwc_otg_pcd_ep_t *ep;
- dwc_ep_t *dwc_ep;
- gintmsk_data_t intr_mask = {.d32 = 0};
-
-
-
- DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-
- /* Read in the device interrupt bits */
- ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
-
- /* Service the Device IN interrupts for each endpoint */
- while(ep_intr) {
- if (ep_intr&0x1) {
- uint32_t empty_msk;
- /* Get EP pointer */
- ep = get_in_ep(pcd, epnum);
- dwc_ep = &ep->dwc_ep;
-
- depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
- empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-
- DWC_DEBUGPL(DBG_PCDV,
- "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n",
- epnum,
- empty_msk,
- depctl.d32);
-
- DWC_DEBUGPL(DBG_PCD,
- "EP%d-%s: type=%d, mps=%d\n",
- dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
- dwc_ep->type, dwc_ep->maxpacket);
-
- diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
-
- DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32);
- /* Transfer complete */
- if (diepint.b.xfercompl) {
- /* Disable the NP Tx FIFO Empty
- * Interrrupt */
- if(core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
- }
- else {
- /* Disable the Tx FIFO Empty Interrupt for this EP */
- uint32_t fifoemptymsk = 0x1 << dwc_ep->num;
- dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
- fifoemptymsk, 0);
- }
- /* Clear the bit in DIEPINTn for this interrupt */
- CLEAR_IN_EP_INTR(core_if,epnum,xfercompl);
-
- /* Complete the transfer */
- if (epnum == 0) {
- handle_ep0(pcd);
- }
-#ifdef DWC_EN_ISOC
- else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- if(!ep->stopped)
- complete_iso_ep(ep);
- }
-#endif //DWC_EN_ISOC
- else {
-
- complete_ep(ep);
- }
- }
- /* Endpoint disable */
- if (diepint.b.epdisabled) {
- DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum);
- handle_in_ep_disable_intr(pcd, epnum);
-
- /* Clear the bit in DIEPINTn for this interrupt */
- CLEAR_IN_EP_INTR(core_if,epnum,epdisabled);
- }
- /* AHB Error */
- if (diepint.b.ahberr) {
- DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum);
- /* Clear the bit in DIEPINTn for this interrupt */
- CLEAR_IN_EP_INTR(core_if,epnum,ahberr);
- }
- /* TimeOUT Handshake (non-ISOC IN EPs) */
- if (diepint.b.timeout) {
- DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum);
- handle_in_ep_timeout_intr(pcd, epnum);
-
- CLEAR_IN_EP_INTR(core_if,epnum,timeout);
- }
- /** IN Token received with TxF Empty */
- if (diepint.b.intktxfemp) {
- DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n",
- epnum);
- if (!ep->stopped && epnum != 0) {
-
- diepmsk_data_t diepmsk = { .d32 = 0};
- diepmsk.b.intktxfemp = 1;
-
- if(core_if->multiproc_int_enable) {
- dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum],
- diepmsk.d32, 0);
- } else {
- dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0);
- }
- start_next_request(ep);
- }
- else if(core_if->dma_desc_enable && epnum == 0 &&
- pcd->ep0state == EP0_OUT_STATUS_PHASE) {
- // EP0 IN set STALL
- depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
-
- /* set the disable and stall bits */
- if (depctl.b.epena) {
- depctl.b.epdis = 1;
- }
- depctl.b.stall = 1;
- dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
- }
- CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp);
- }
- /** IN Token Received with EP mismatch */
- if (diepint.b.intknepmis) {
- DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum);
- CLEAR_IN_EP_INTR(core_if,epnum,intknepmis);
- }
- /** IN Endpoint NAK Effective */
- if (diepint.b.inepnakeff) {
- DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum);
- /* Periodic EP */
- if (ep->disabling) {
- depctl.d32 = 0;
- depctl.b.snak = 1;
- depctl.b.epdis = 1;
- dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
- }
- CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff);
-
- }
-
- /** IN EP Tx FIFO Empty Intr */
- if (diepint.b.emptyintr) {
- DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum);
- write_empty_tx_fifo(pcd, epnum);
-
- CLEAR_IN_EP_INTR(core_if,epnum,emptyintr);
-
- }
-
- /** IN EP BNA Intr */
- if (diepint.b.bna) {
- CLEAR_IN_EP_INTR(core_if,epnum,bna);
- if(core_if->dma_desc_enable) {
-#ifdef DWC_EN_ISOC
- if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * This checking is performed to prevent first "false" BNA
- * handling occuring right after reconnect
- */
- if(dwc_ep->next_frame != 0xffffffff)
- dwc_otg_pcd_handle_iso_bna(ep);
- }
- else
-#endif //DWC_EN_ISOC
- {
- dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-
- /* If Global Continue on BNA is disabled - disable EP */
- if(!dctl.b.gcontbna) {
- depctl.d32 = 0;
- depctl.b.snak = 1;
- depctl.b.epdis = 1;
- dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
- } else {
- start_next_request(ep);
- }
- }
- }
- }
- /* NAK Interrutp */
- if (diepint.b.nak) {
- DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum);
- handle_in_ep_nak_intr(pcd, epnum);
-
- CLEAR_IN_EP_INTR(core_if,epnum,nak);
- }
- }
- epnum++;
- ep_intr >>=1;
- }
-
- return 1;
-#undef CLEAR_IN_EP_INTR
-}
-
-/**
- * This interrupt indicates that an OUT EP has a pending Interrupt.
- * The sequence for handling the OUT EP interrupt is shown below:
- * -# Read the Device All Endpoint Interrupt register
- * -# Repeat the following for each OUT EP interrupt bit set (from
- * LSB to MSB).
- * -# Read the Device Endpoint Interrupt (DOEPINTn) register
- * -# If "Transfer Complete" call the request complete function
- * -# If "Endpoint Disabled" complete the EP disable procedure.
- * -# If "AHB Error Interrupt" log error
- * -# If "Setup Phase Done" process Setup Packet (See Standard USB
- * Command Processing)
- */
-static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd)
-{
-#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
-do { \
- doepint_data_t doepint = {.d32=0}; \
- doepint.b.__intr = 1; \
- dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
- doepint.d32); \
-} while (0)
-
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
- dwc_otg_dev_if_t *dev_if = core_if->dev_if;
- uint32_t ep_intr;
- doepint_data_t doepint = {.d32=0};
- dctl_data_t dctl = {.d32=0};
- depctl_data_t doepctl = {.d32=0};
- uint32_t epnum = 0;
- dwc_otg_pcd_ep_t *ep;
- dwc_ep_t *dwc_ep;
-
- DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-
- /* Read in the device interrupt bits */
- ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
-
- while(ep_intr) {
- if (ep_intr&0x1) {
- /* Get EP pointer */
- ep = get_out_ep(pcd, epnum);
- dwc_ep = &ep->dwc_ep;
-
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_PCDV,
- "EP%d-%s: type=%d, mps=%d\n",
- dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
- dwc_ep->type, dwc_ep->maxpacket);
-#endif
- doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
-
- /* Transfer complete */
- if (doepint.b.xfercompl) {
-
- if (epnum == 0) {
- /* Clear the bit in DOEPINTn for this interrupt */
- CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
- if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE)
- handle_ep0(pcd);
-#ifdef DWC_EN_ISOC
- } else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- if (doepint.b.pktdrpsts == 0) {
- /* Clear the bit in DOEPINTn for this interrupt */
- CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
- complete_iso_ep(ep);
- } else {
-
- doepint_data_t doepint = {.d32=0};
- doepint.b.xfercompl = 1;
- doepint.b.pktdrpsts = 1;
- dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint,
- doepint.d32);
- if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) {
- complete_iso_ep(ep);
- }
- }
-#endif //DWC_EN_ISOC
- } else {
- /* Clear the bit in DOEPINTn for this interrupt */
- CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
- complete_ep(ep);
- }
-
- }
-
- /* Endpoint disable */
- if (doepint.b.epdisabled) {
-
- /* Clear the bit in DOEPINTn for this interrupt */
- CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled);
- }
- /* AHB Error */
- if (doepint.b.ahberr) {
- DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum);
- DWC_DEBUGPL(DBG_PCD,"EP DMA REG %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma);
- CLEAR_OUT_EP_INTR(core_if,epnum,ahberr);
- }
- /* Setup Phase Done (contorl EPs) */
- if (doepint.b.setup) {
-#ifdef DEBUG_EP0
- DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n",
- epnum);
-#endif
- CLEAR_OUT_EP_INTR(core_if,epnum,setup);
-
- handle_ep0(pcd);
- }
-
- /** OUT EP BNA Intr */
- if (doepint.b.bna) {
- CLEAR_OUT_EP_INTR(core_if,epnum,bna);
- if(core_if->dma_desc_enable) {
-#ifdef DWC_EN_ISOC
- if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * This checking is performed to prevent first "false" BNA
- * handling occuring right after reconnect
- */
- if(dwc_ep->next_frame != 0xffffffff)
- dwc_otg_pcd_handle_iso_bna(ep);
- }
- else
-#endif //DWC_EN_ISOC
- {
- dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-
- /* If Global Continue on BNA is disabled - disable EP*/
- if(!dctl.b.gcontbna) {
- doepctl.d32 = 0;
- doepctl.b.snak = 1;
- doepctl.b.epdis = 1;
- dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32);
- } else {
- start_next_request(ep);
- }
- }
- }
- }
- if (doepint.b.stsphsercvd) {
- CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd);
- if(core_if->dma_desc_enable) {
- do_setup_in_status_phase(pcd);
- }
- }
- /* Babble Interrutp */
- if (doepint.b.babble) {
- DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum);
- handle_out_ep_babble_intr(pcd, epnum);
-
- CLEAR_OUT_EP_INTR(core_if,epnum,babble);
- }
- /* NAK Interrutp */
- if (doepint.b.nak) {
- DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum);
- handle_out_ep_nak_intr(pcd, epnum);
-
- CLEAR_OUT_EP_INTR(core_if,epnum,nak);
- }
- /* NYET Interrutp */
- if (doepint.b.nyet) {
- DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum);
- handle_out_ep_nyet_intr(pcd, epnum);
-
- CLEAR_OUT_EP_INTR(core_if,epnum,nyet);
- }
- }
-
- epnum++;
- ep_intr >>=1;
- }
-
- return 1;
-
-#undef CLEAR_OUT_EP_INTR
-}
-
-
-/**
- * Incomplete ISO IN Transfer Interrupt.
- * This interrupt indicates one of the following conditions occurred
- * while transmitting an ISOC transaction.
- * - Corrupted IN Token for ISOC EP.
- * - Packet not complete in FIFO.
- * The follow actions will be taken:
- * -# Determine the EP
- * -# Set incomplete flag in dwc_ep structure
- * -# Disable EP; when "Endpoint Disabled" interrupt is received
- * Flush FIFO
- */
-int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd)
-{
- gintsts_data_t gintsts;
-
-
-#ifdef DWC_EN_ISOC
- dwc_otg_dev_if_t *dev_if;
- deptsiz_data_t deptsiz = { .d32 = 0};
- depctl_data_t depctl = { .d32 = 0};
- dsts_data_t dsts = { .d32 = 0};
- dwc_ep_t *dwc_ep;
- int i;
-
- dev_if = GET_CORE_IF(pcd)->dev_if;
-
- for(i = 1; i <= dev_if->num_in_eps; ++i) {
- dwc_ep = &pcd->in_ep[i].dwc_ep;
- if(dwc_ep->active &&
- dwc_ep->type == USB_ENDPOINT_XFER_ISOC)
- {
- deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz);
- depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-
- if(depctl.b.epdis && deptsiz.d32) {
- set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
- if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
- dwc_ep->cur_pkt = 0;
- dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-
- if(dwc_ep->proc_buf_num) {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
- } else {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
- }
-
- }
-
- dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
- dwc_ep->next_frame = dsts.b.soffn;
-
- dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
- }
- }
- }
-
-#else
- gintmsk_data_t intr_mask = { .d32 = 0};
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
- "IN ISOC Incomplete");
-
- intr_mask.b.incomplisoin = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-#endif //DWC_EN_ISOC
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.incomplisoin = 1;
- dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
-
- return 1;
-}
-
-/**
- * Incomplete ISO OUT Transfer Interrupt.
- *
- * This interrupt indicates that the core has dropped an ISO OUT
- * packet. The following conditions can be the cause:
- * - FIFO Full, the entire packet would not fit in the FIFO.
- * - CRC Error
- * - Corrupted Token
- * The follow actions will be taken:
- * -# Determine the EP
- * -# Set incomplete flag in dwc_ep structure
- * -# Read any data from the FIFO
- * -# Disable EP. when "Endpoint Disabled" interrupt is received
- * re-enable EP.
- */
-int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd)
-{
- /* @todo implement ISR */
- gintsts_data_t gintsts;
-
-#ifdef DWC_EN_ISOC
- dwc_otg_dev_if_t *dev_if;
- deptsiz_data_t deptsiz = { .d32 = 0};
- depctl_data_t depctl = { .d32 = 0};
- dsts_data_t dsts = { .d32 = 0};
- dwc_ep_t *dwc_ep;
- int i;
-
- dev_if = GET_CORE_IF(pcd)->dev_if;
-
- for(i = 1; i <= dev_if->num_out_eps; ++i) {
- dwc_ep = &pcd->in_ep[i].dwc_ep;
- if(pcd->out_ep[i].dwc_ep.active &&
- pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC)
- {
- deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz);
- depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-
- if(depctl.b.epdis && deptsiz.d32) {
- set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep);
- if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
- dwc_ep->cur_pkt = 0;
- dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-
- if(dwc_ep->proc_buf_num) {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
- } else {
- dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
- dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
- }
-
- }
-
- dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
- dwc_ep->next_frame = dsts.b.soffn;
-
- dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
- }
- }
- }
-#else
- /** @todo implement ISR */
- gintmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
- "OUT ISOC Incomplete");
-
- intr_mask.b.incomplisoout = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-
-#endif // DWC_EN_ISOC
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.incomplisoout = 1;
- dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
-
- return 1;
-}
-
-/**
- * This function handles the Global IN NAK Effective interrupt.
- *
- */
-int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
- depctl_data_t diepctl = { .d32 = 0};
- depctl_data_t diepctl_rd = { .d32 = 0};
- gintmsk_data_t intr_mask = { .d32 = 0};
- gintsts_data_t gintsts;
- int i;
-
- DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
-
- /* Disable all active IN EPs */
- diepctl.b.epdis = 1;
- diepctl.b.snak = 1;
-
- for (i=0; i <= dev_if->num_in_eps; i++)
- {
- diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
- if (diepctl_rd.b.epena) {
- dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl,
- diepctl.d32);
- }
- }
- /* Disable the Global IN NAK Effective Interrupt */
- intr_mask.b.ginnakeff = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.ginnakeff = 1;
- dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
-
- return 1;
-}
-
-/**
- * OUT NAK Effective.
- *
- */
-int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd)
-{
- gintmsk_data_t intr_mask = { .d32 = 0};
- gintsts_data_t gintsts;
-
- DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
- "Global IN NAK Effective\n");
- /* Disable the Global IN NAK Effective Interrupt */
- intr_mask.b.goutnakeff = 1;
- dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
- intr_mask.d32, 0);
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.goutnakeff = 1;
- dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
- gintsts.d32);
-
- return 1;
-}
-
-
-/**
- * PCD interrupt handler.
- *
- * The PCD handles the device interrupts. Many conditions can cause a
- * device interrupt. When an interrupt occurs, the device interrupt
- * service routine determines the cause of the interrupt and
- * dispatches handling to the appropriate function. These interrupt
- * handling functions are described below.
- *
- * All interrupt registers are processed from LSB to MSB.
- *
- */
-int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd)
-{
- dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-#ifdef VERBOSE
- dwc_otg_core_global_regs_t *global_regs =
- core_if->core_global_regs;
-#endif
- gintsts_data_t gintr_status;
- int32_t retval = 0;
-
-
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n",
- __func__,
- dwc_read_reg32(&global_regs->gintsts),
- dwc_read_reg32(&global_regs->gintmsk));
-#endif
-
- if (dwc_otg_is_device_mode(core_if)) {
- SPIN_LOCK(&pcd->lock);
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n",
- __func__,
- dwc_read_reg32(&global_regs->gintsts),
- dwc_read_reg32(&global_regs->gintmsk));
-#endif
-
- gintr_status.d32 = dwc_otg_read_core_intr(core_if);
-
-/*
- if (!gintr_status.d32) {
- SPIN_UNLOCK(&pcd->lock);
- return 0;
- }
-*/
- DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
- __func__, gintr_status.d32);
-
- if (gintr_status.b.sofintr) {
- retval |= dwc_otg_pcd_handle_sof_intr(pcd);
- }
- if (gintr_status.b.rxstsqlvl) {
- retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
- }
- if (gintr_status.b.nptxfempty) {
- retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
- }
- if (gintr_status.b.ginnakeff) {
- retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
- }
- if (gintr_status.b.goutnakeff) {
- retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
- }
- if (gintr_status.b.i2cintr) {
- retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
- }
- if (gintr_status.b.erlysuspend) {
- retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
- }
- if (gintr_status.b.usbreset) {
- retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
- }
- if (gintr_status.b.enumdone) {
- retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
- }
- if (gintr_status.b.isooutdrop) {
- retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd);
- }
- if (gintr_status.b.eopframe) {
- retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
- }
- if (gintr_status.b.epmismatch) {
- retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
- }
- if (gintr_status.b.inepint) {
- if(!core_if->multiproc_int_enable) {
- retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
- }
- }
- if (gintr_status.b.outepintr) {
- if(!core_if->multiproc_int_enable) {
- retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
- }
- }
- if (gintr_status.b.incomplisoin) {
- retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
- }
- if (gintr_status.b.incomplisoout) {
- retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
- }
-
- /* In MPI mode De vice Endpoints intterrupts are asserted
- * without setting outepintr and inepint bits set, so these
- * Interrupt handlers are called without checking these bit-fields
- */
- if(core_if->multiproc_int_enable) {
- retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
- retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
- }
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
- dwc_read_reg32(&global_regs->gintsts));
-#endif
- SPIN_UNLOCK(&pcd->lock);
- }
-
- S3C2410X_CLEAR_EINTPEND();
-
- return retval;
-}
-
-#endif /* DWC_HOST_ONLY */
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_regs.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_regs.h
deleted file mode 100644
index 826576671b..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_regs.h
+++ /dev/null
@@ -1,2075 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:15 $
- * $Change: 1099526 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#ifndef __DWC_OTG_REGS_H__
-#define __DWC_OTG_REGS_H__
-
-/**
- * @file
- *
- * This file contains the data structures for accessing the DWC_otg core registers.
- *
- * The application interfaces with the HS OTG core by reading from and
- * writing to the Control and Status Register (CSR) space through the
- * AHB Slave interface. These registers are 32 bits wide, and the
- * addresses are 32-bit-block aligned.
- * CSRs are classified as follows:
- * - Core Global Registers
- * - Device Mode Registers
- * - Device Global Registers
- * - Device Endpoint Specific Registers
- * - Host Mode Registers
- * - Host Global Registers
- * - Host Port CSRs
- * - Host Channel Specific Registers
- *
- * Only the Core Global registers can be accessed in both Device and
- * Host modes. When the HS OTG core is operating in one mode, either
- * Device or Host, the application must not access registers from the
- * other mode. When the core switches from one mode to another, the
- * registers in the new mode of operation must be reprogrammed as they
- * would be after a power-on reset.
- */
-
-/** Maximum number of Periodic FIFOs */
-#define MAX_PERIO_FIFOS 15
-/** Maximum number of Transmit FIFOs */
-#define MAX_TX_FIFOS 15
-
-/** Maximum number of Endpoints/HostChannels */
-#define MAX_EPS_CHANNELS 16
-
-/****************************************************************************/
-/** DWC_otg Core registers .
- * The dwc_otg_core_global_regs structure defines the size
- * and relative field offsets for the Core Global registers.
- */
-typedef struct dwc_otg_core_global_regs
-{
- /** OTG Control and Status Register. <i>Offset: 000h</i> */
- volatile uint32_t gotgctl;
- /** OTG Interrupt Register. <i>Offset: 004h</i> */
- volatile uint32_t gotgint;
- /**Core AHB Configuration Register. <i>Offset: 008h</i> */
- volatile uint32_t gahbcfg;
-
-#define DWC_GLBINTRMASK 0x0001
-#define DWC_DMAENABLE 0x0020
-#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
-#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
-#define DWC_PTXEMPTYLVL_EMPTY 0x0100
-#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
-
- /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
- volatile uint32_t gusbcfg;
- /**Core Reset Register. <i>Offset: 010h</i> */
- volatile uint32_t grstctl;
- /**Core Interrupt Register. <i>Offset: 014h</i> */
- volatile uint32_t gintsts;
- /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
- volatile uint32_t gintmsk;
- /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
- volatile uint32_t grxstsr;
- /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
- volatile uint32_t grxstsp;
- /**Receive FIFO Size Register. <i>Offset: 024h</i> */
- volatile uint32_t grxfsiz;
- /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
- volatile uint32_t gnptxfsiz;
- /**Non Periodic Transmit FIFO/Queue Status Register (Read
- * Only). <i>Offset: 02Ch</i> */
- volatile uint32_t gnptxsts;
- /**I2C Access Register. <i>Offset: 030h</i> */
- volatile uint32_t gi2cctl;
- /**PHY Vendor Control Register. <i>Offset: 034h</i> */
- volatile uint32_t gpvndctl;
- /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
- volatile uint32_t ggpio;
- /**User ID Register. <i>Offset: 03Ch</i> */
- volatile uint32_t guid;
- /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
- volatile uint32_t gsnpsid;
- /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
- volatile uint32_t ghwcfg1;
- /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
- volatile uint32_t ghwcfg2;
-#define DWC_SLAVE_ONLY_ARCH 0
-#define DWC_EXT_DMA_ARCH 1
-#define DWC_INT_DMA_ARCH 2
-
-#define DWC_MODE_HNP_SRP_CAPABLE 0
-#define DWC_MODE_SRP_ONLY_CAPABLE 1
-#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
-#define DWC_MODE_SRP_CAPABLE_DEVICE 3
-#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
-#define DWC_MODE_SRP_CAPABLE_HOST 5
-#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
-
- /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
- volatile uint32_t ghwcfg3;
- /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
- volatile uint32_t ghwcfg4;
- /** Reserved <i>Offset: 054h-0FFh</i> */
- volatile uint32_t reserved[43];
- /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
- volatile uint32_t hptxfsiz;
- /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
- otherwise Device Transmit FIFO#n Register.
- * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
- volatile uint32_t dptxfsiz_dieptxf[15];
-} dwc_otg_core_global_regs_t;
-
-/**
- * This union represents the bit fields of the Core OTG Control
- * and Status Register (GOTGCTL). Set the bits using the bit
- * fields then write the <i>d32</i> value to the register.
- */
-typedef union gotgctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned sesreqscs : 1;
- unsigned sesreq : 1;
- unsigned reserved2_7 : 6;
- unsigned hstnegscs : 1;
- unsigned hnpreq : 1;
- unsigned hstsethnpen : 1;
- unsigned devhnpen : 1;
- unsigned reserved12_15 : 4;
- unsigned conidsts : 1;
- unsigned reserved17 : 1;
- unsigned asesvld : 1;
- unsigned bsesvld : 1;
- unsigned currmod : 1;
- unsigned reserved21_31 : 11;
- } b;
-} gotgctl_data_t;
-
-/**
- * This union represents the bit fields of the Core OTG Interrupt Register
- * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
- * value to the register.
- */
-typedef union gotgint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Current Mode */
- unsigned reserved0_1 : 2;
-
- /** Session End Detected */
- unsigned sesenddet : 1;
-
- unsigned reserved3_7 : 5;
-
- /** Session Request Success Status Change */
- unsigned sesreqsucstschng : 1;
- /** Host Negotiation Success Status Change */
- unsigned hstnegsucstschng : 1;
-
- unsigned reserver10_16 : 7;
-
- /** Host Negotiation Detected */
- unsigned hstnegdet : 1;
- /** A-Device Timeout Change */
- unsigned adevtoutchng : 1;
- /** Debounce Done */
- unsigned debdone : 1;
-
- unsigned reserved31_20 : 12;
-
- } b;
-} gotgint_data_t;
-
-
-/**
- * This union represents the bit fields of the Core AHB Configuration
- * Register (GAHBCFG). Set/clear the bits using the bit fields then
- * write the <i>d32</i> value to the register.
- */
-typedef union gahbcfg_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned glblintrmsk : 1;
-#define DWC_GAHBCFG_GLBINT_ENABLE 1
-
- unsigned hburstlen : 4;
-#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
-
- unsigned dmaenable : 1;
-#define DWC_GAHBCFG_DMAENABLE 1
- unsigned reserved : 1;
- unsigned nptxfemplvl_txfemplvl : 1;
- unsigned ptxfemplvl : 1;
-#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
-#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
- unsigned reserved9_31 : 23;
- } b;
-} gahbcfg_data_t;
-
-/**
- * This union represents the bit fields of the Core USB Configuration
- * Register (GUSBCFG). Set the bits using the bit fields then write
- * the <i>d32</i> value to the register.
- */
-typedef union gusbcfg_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned toutcal : 3;
- unsigned phyif : 1;
- unsigned ulpi_utmi_sel : 1;
- unsigned fsintf : 1;
- unsigned physel : 1;
- unsigned ddrsel : 1;
- unsigned srpcap : 1;
- unsigned hnpcap : 1;
- unsigned usbtrdtim : 4;
- unsigned nptxfrwnden : 1;
- unsigned phylpwrclksel : 1;
- unsigned otgutmifssel : 1;
- unsigned ulpi_fsls : 1;
- unsigned ulpi_auto_res : 1;
- unsigned ulpi_clk_sus_m : 1;
- unsigned ulpi_ext_vbus_drv : 1;
- unsigned ulpi_int_vbus_indicator : 1;
- unsigned term_sel_dl_pulse : 1;
- unsigned reserved23_27 : 5;
- unsigned tx_end_delay : 1;
- unsigned reserved29_31 : 3;
- } b;
-} gusbcfg_data_t;
-
-/**
- * This union represents the bit fields of the Core Reset Register
- * (GRSTCTL). Set/clear the bits using the bit fields then write the
- * <i>d32</i> value to the register.
- */
-typedef union grstctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Core Soft Reset (CSftRst) (Device and Host)
- *
- * The application can flush the control logic in the
- * entire core using this bit. This bit resets the
- * pipelines in the AHB Clock domain as well as the
- * PHY Clock domain.
- *
- * The state machines are reset to an IDLE state, the
- * control bits in the CSRs are cleared, all the
- * transmit FIFOs and the receive FIFO are flushed.
- *
- * The status mask bits that control the generation of
- * the interrupt, are cleared, to clear the
- * interrupt. The interrupt status bits are not
- * cleared, so the application can get the status of
- * any events that occurred in the core after it has
- * set this bit.
- *
- * Any transactions on the AHB are terminated as soon
- * as possible following the protocol. Any
- * transactions on the USB are terminated immediately.
- *
- * The configuration settings in the CSRs are
- * unchanged, so the software doesn't have to
- * reprogram these registers (Device
- * Configuration/Host Configuration/Core System
- * Configuration/Core PHY Configuration).
- *
- * The application can write to this bit, any time it
- * wants to reset the core. This is a self clearing
- * bit and the core clears this bit after all the
- * necessary logic is reset in the core, which may
- * take several clocks, depending on the current state
- * of the core.
- */
- unsigned csftrst : 1;
- /** Hclk Soft Reset
- *
- * The application uses this bit to reset the control logic in
- * the AHB clock domain. Only AHB clock domain pipelines are
- * reset.
- */
- unsigned hsftrst : 1;
- /** Host Frame Counter Reset (Host Only)<br>
- *
- * The application can reset the (micro)frame number
- * counter inside the core, using this bit. When the
- * (micro)frame counter is reset, the subsequent SOF
- * sent out by the core, will have a (micro)frame
- * number of 0.
- */
- unsigned hstfrm : 1;
- /** In Token Sequence Learning Queue Flush
- * (INTknQFlsh) (Device Only)
- */
- unsigned intknqflsh : 1;
- /** RxFIFO Flush (RxFFlsh) (Device and Host)
- *
- * The application can flush the entire Receive FIFO
- * using this bit. <p>The application must first
- * ensure that the core is not in the middle of a
- * transaction. <p>The application should write into
- * this bit, only after making sure that neither the
- * DMA engine is reading from the RxFIFO nor the MAC
- * is writing the data in to the FIFO. <p>The
- * application should wait until the bit is cleared
- * before performing any other operations. This bit
- * will takes 8 clocks (slowest of PHY or AHB clock)
- * to clear.
- */
- unsigned rxfflsh : 1;
- /** TxFIFO Flush (TxFFlsh) (Device and Host).
- *
- * This bit is used to selectively flush a single or
- * all transmit FIFOs. The application must first
- * ensure that the core is not in the middle of a
- * transaction. <p>The application should write into
- * this bit, only after making sure that neither the
- * DMA engine is writing into the TxFIFO nor the MAC
- * is reading the data out of the FIFO. <p>The
- * application should wait until the core clears this
- * bit, before performing any operations. This bit
- * will takes 8 clocks (slowest of PHY or AHB clock)
- * to clear.
- */
- unsigned txfflsh : 1;
-
- /** TxFIFO Number (TxFNum) (Device and Host).
- *
- * This is the FIFO number which needs to be flushed,
- * using the TxFIFO Flush bit. This field should not
- * be changed until the TxFIFO Flush bit is cleared by
- * the core.
- * - 0x0 : Non Periodic TxFIFO Flush
- * - 0x1 : Periodic TxFIFO #1 Flush in device mode
- * or Periodic TxFIFO in host mode
- * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
- * - ...
- * - 0xF : Periodic TxFIFO #15 Flush in device mode
- * - 0x10: Flush all the Transmit NonPeriodic and
- * Transmit Periodic FIFOs in the core
- */
- unsigned txfnum : 5;
- /** Reserved */
- unsigned reserved11_29 : 19;
- /** DMA Request Signal. Indicated DMA request is in
- * probress. Used for debug purpose. */
- unsigned dmareq : 1;
- /** AHB Master Idle. Indicates the AHB Master State
- * Machine is in IDLE condition. */
- unsigned ahbidle : 1;
- } b;
-} grstctl_t;
-
-
-/**
- * This union represents the bit fields of the Core Interrupt Mask
- * Register (GINTMSK). Set/clear the bits using the bit fields then
- * write the <i>d32</i> value to the register.
- */
-typedef union gintmsk_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned reserved0 : 1;
- unsigned modemismatch : 1;
- unsigned otgintr : 1;
- unsigned sofintr : 1;
- unsigned rxstsqlvl : 1;
- unsigned nptxfempty : 1;
- unsigned ginnakeff : 1;
- unsigned goutnakeff : 1;
- unsigned reserved8 : 1;
- unsigned i2cintr : 1;
- unsigned erlysuspend : 1;
- unsigned usbsuspend : 1;
- unsigned usbreset : 1;
- unsigned enumdone : 1;
- unsigned isooutdrop : 1;
- unsigned eopframe : 1;
- unsigned reserved16 : 1;
- unsigned epmismatch : 1;
- unsigned inepintr : 1;
- unsigned outepintr : 1;
- unsigned incomplisoin : 1;
- unsigned incomplisoout : 1;
- unsigned reserved22_23 : 2;
- unsigned portintr : 1;
- unsigned hcintr : 1;
- unsigned ptxfempty : 1;
- unsigned reserved27 : 1;
- unsigned conidstschng : 1;
- unsigned disconnect : 1;
- unsigned sessreqintr : 1;
- unsigned wkupintr : 1;
- } b;
-} gintmsk_data_t;
-/**
- * This union represents the bit fields of the Core Interrupt Register
- * (GINTSTS). Set/clear the bits using the bit fields then write the
- * <i>d32</i> value to the register.
- */
-typedef union gintsts_data
-{
- /** raw register data */
- uint32_t d32;
-#define DWC_SOF_INTR_MASK 0x0008
- /** register bits */
- struct
- {
-#define DWC_HOST_MODE 1
- unsigned curmode : 1;
- unsigned modemismatch : 1;
- unsigned otgintr : 1;
- unsigned sofintr : 1;
- unsigned rxstsqlvl : 1;
- unsigned nptxfempty : 1;
- unsigned ginnakeff : 1;
- unsigned goutnakeff : 1;
- unsigned reserved8 : 1;
- unsigned i2cintr : 1;
- unsigned erlysuspend : 1;
- unsigned usbsuspend : 1;
- unsigned usbreset : 1;
- unsigned enumdone : 1;
- unsigned isooutdrop : 1;
- unsigned eopframe : 1;
- unsigned intokenrx : 1;
- unsigned epmismatch : 1;
- unsigned inepint: 1;
- unsigned outepintr : 1;
- unsigned incomplisoin : 1;
- unsigned incomplisoout : 1;
- unsigned reserved22_23 : 2;
- unsigned portintr : 1;
- unsigned hcintr : 1;
- unsigned ptxfempty : 1;
- unsigned reserved27 : 1;
- unsigned conidstschng : 1;
- unsigned disconnect : 1;
- unsigned sessreqintr : 1;
- unsigned wkupintr : 1;
- } b;
-} gintsts_data_t;
-
-
-/**
- * This union represents the bit fields in the Device Receive Status Read and
- * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
- * element then read out the bits using the <i>b</i>it elements.
- */
-typedef union device_grxsts_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned epnum : 4;
- unsigned bcnt : 11;
- unsigned dpid : 2;
-
-#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
-#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
-
-#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
-#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
-#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
- unsigned pktsts : 4;
- unsigned fn : 4;
- unsigned reserved : 7;
- } b;
-} device_grxsts_data_t;
-
-/**
- * This union represents the bit fields in the Host Receive Status Read and
- * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
- * element then read out the bits using the <i>b</i>it elements.
- */
-typedef union host_grxsts_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned chnum : 4;
- unsigned bcnt : 11;
- unsigned dpid : 2;
-
- unsigned pktsts : 4;
-#define DWC_GRXSTS_PKTSTS_IN 0x2
-#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
-#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
-#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
-
- unsigned reserved : 11;
- } b;
-} host_grxsts_data_t;
-
-/**
- * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
- * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then
- * read out the bits using the <i>b</i>it elements.
- */
-typedef union fifosize_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned startaddr : 16;
- unsigned depth : 16;
- } b;
-} fifosize_data_t;
-
-/**
- * This union represents the bit fields in the Non-Periodic Transmit
- * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
- * <i>d32</i> element then read out the bits using the <i>b</i>it
- * elements.
- */
-typedef union gnptxsts_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned nptxfspcavail : 16;
- unsigned nptxqspcavail : 8;
- /** Top of the Non-Periodic Transmit Request Queue
- * - bit 24 - Terminate (Last entry for the selected
- * channel/EP)
- * - bits 26:25 - Token Type
- * - 2'b00 - IN/OUT
- * - 2'b01 - Zero Length OUT
- * - 2'b10 - PING/Complete Split
- * - 2'b11 - Channel Halt
- * - bits 30:27 - Channel/EP Number
- */
- unsigned nptxqtop_terminate : 1;
- unsigned nptxqtop_token : 2;
- unsigned nptxqtop_chnep : 4;
- unsigned reserved : 1;
- } b;
-} gnptxsts_data_t;
-
-/**
- * This union represents the bit fields in the Transmit
- * FIFO Status Register (DTXFSTS). Read the register into the
- * <i>d32</i> element then read out the bits using the <i>b</i>it
- * elements.
- */
-typedef union dtxfsts_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned txfspcavail : 16;
- unsigned reserved : 16;
- } b;
-} dtxfsts_data_t;
-
-/**
- * This union represents the bit fields in the I2C Control Register
- * (I2CCTL). Read the register into the <i>d32</i> element then read out the
- * bits using the <i>b</i>it elements.
- */
-typedef union gi2cctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned rwdata : 8;
- unsigned regaddr : 8;
- unsigned addr : 7;
- unsigned i2cen : 1;
- unsigned ack : 1;
- unsigned i2csuspctl : 1;
- unsigned i2cdevaddr : 2;
- unsigned reserved : 2;
- unsigned rw : 1;
- unsigned bsydne : 1;
- } b;
-} gi2cctl_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config1
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg1_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned ep_dir0 : 2;
- unsigned ep_dir1 : 2;
- unsigned ep_dir2 : 2;
- unsigned ep_dir3 : 2;
- unsigned ep_dir4 : 2;
- unsigned ep_dir5 : 2;
- unsigned ep_dir6 : 2;
- unsigned ep_dir7 : 2;
- unsigned ep_dir8 : 2;
- unsigned ep_dir9 : 2;
- unsigned ep_dir10 : 2;
- unsigned ep_dir11 : 2;
- unsigned ep_dir12 : 2;
- unsigned ep_dir13 : 2;
- unsigned ep_dir14 : 2;
- unsigned ep_dir15 : 2;
- } b;
-} hwcfg1_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config2
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg2_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /* GHWCFG2 */
- unsigned op_mode : 3;
-#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
-
- unsigned architecture : 2;
- unsigned point2point : 1;
- unsigned hs_phy_type : 2;
-#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
-#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
-#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
-
- unsigned fs_phy_type : 2;
- unsigned num_dev_ep : 4;
- unsigned num_host_chan : 4;
- unsigned perio_ep_supported : 1;
- unsigned dynamic_fifo : 1;
- unsigned multi_proc_int : 1;
- unsigned reserved21 : 1;
- unsigned nonperio_tx_q_depth : 2;
- unsigned host_perio_tx_q_depth : 2;
- unsigned dev_token_q_depth : 5;
- unsigned reserved31 : 1;
- } b;
-} hwcfg2_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config3
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg3_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /* GHWCFG3 */
- unsigned xfer_size_cntr_width : 4;
- unsigned packet_size_cntr_width : 3;
- unsigned otg_func : 1;
- unsigned i2c : 1;
- unsigned vendor_ctrl_if : 1;
- unsigned optional_features : 1;
- unsigned synch_reset_type : 1;
- unsigned ahb_phy_clock_synch : 1;
- unsigned reserved15_13 : 3;
- unsigned dfifo_depth : 16;
- } b;
-} hwcfg3_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config4
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg4_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned num_dev_perio_in_ep : 4;
- unsigned power_optimiz : 1;
- unsigned min_ahb_freq : 9;
- unsigned utmi_phy_data_width : 2;
- unsigned num_dev_mode_ctrl_ep : 4;
- unsigned iddig_filt_en : 1;
- unsigned vbus_valid_filt_en : 1;
- unsigned a_valid_filt_en : 1;
- unsigned b_valid_filt_en : 1;
- unsigned session_end_filt_en : 1;
- unsigned ded_fifo_en : 1;
- unsigned num_in_eps : 4;
- unsigned desc_dma : 1;
- unsigned desc_dma_dyn : 1;
- } b;
-} hwcfg4_data_t;
-
-////////////////////////////////////////////
-// Device Registers
-/**
- * Device Global Registers. <i>Offsets 800h-BFFh</i>
- *
- * The following structures define the size and relative field offsets
- * for the Device Mode Registers.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_global_regs
-{
- /** Device Configuration Register. <i>Offset 800h</i> */
- volatile uint32_t dcfg;
- /** Device Control Register. <i>Offset: 804h</i> */
- volatile uint32_t dctl;
- /** Device Status Register (Read Only). <i>Offset: 808h</i> */
- volatile uint32_t dsts;
- /** Reserved. <i>Offset: 80Ch</i> */
- uint32_t unused;
- /** Device IN Endpoint Common Interrupt Mask
- * Register. <i>Offset: 810h</i> */
- volatile uint32_t diepmsk;
- /** Device OUT Endpoint Common Interrupt Mask
- * Register. <i>Offset: 814h</i> */
- volatile uint32_t doepmsk;
- /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
- volatile uint32_t daint;
- /** Device All Endpoints Interrupt Mask Register. <i>Offset:
- * 81Ch</i> */
- volatile uint32_t daintmsk;
- /** Device IN Token Queue Read Register-1 (Read Only).
- * <i>Offset: 820h</i> */
- volatile uint32_t dtknqr1;
- /** Device IN Token Queue Read Register-2 (Read Only).
- * <i>Offset: 824h</i> */
- volatile uint32_t dtknqr2;
- /** Device VBUS discharge Register. <i>Offset: 828h</i> */
- volatile uint32_t dvbusdis;
- /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
- volatile uint32_t dvbuspulse;
- /** Device IN Token Queue Read Register-3 (Read Only). /
- * Device Thresholding control register (Read/Write)
- * <i>Offset: 830h</i> */
- volatile uint32_t dtknqr3_dthrctl;
- /** Device IN Token Queue Read Register-4 (Read Only). /
- * Device IN EPs empty Inr. Mask Register (Read/Write)
- * <i>Offset: 834h</i> */
- volatile uint32_t dtknqr4_fifoemptymsk;
- /** Device Each Endpoint Interrupt Register (Read Only). /
- * <i>Offset: 838h</i> */
- volatile uint32_t deachint;
- /** Device Each Endpoint Interrupt mask Register (Read/Write). /
- * <i>Offset: 83Ch</i> */
- volatile uint32_t deachintmsk;
- /** Device Each In Endpoint Interrupt mask Register (Read/Write). /
- * <i>Offset: 840h</i> */
- volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
- /** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
- * <i>Offset: 880h</i> */
- volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
-} dwc_otg_device_global_regs_t;
-
-/**
- * This union represents the bit fields in the Device Configuration
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements. Write the
- * <i>d32</i> member to the dcfg register.
- */
-typedef union dcfg_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Device Speed */
- unsigned devspd : 2;
- /** Non Zero Length Status OUT Handshake */
- unsigned nzstsouthshk : 1;
-#define DWC_DCFG_SEND_STALL 1
-
- unsigned reserved3 : 1;
- /** Device Addresses */
- unsigned devaddr : 7;
- /** Periodic Frame Interval */
- unsigned perfrint : 2;
-#define DWC_DCFG_FRAME_INTERVAL_80 0
-#define DWC_DCFG_FRAME_INTERVAL_85 1
-#define DWC_DCFG_FRAME_INTERVAL_90 2
-#define DWC_DCFG_FRAME_INTERVAL_95 3
-
- unsigned reserved13_17 : 5;
- /** In Endpoint Mis-match count */
- unsigned epmscnt : 5;
- /** Enable Descriptor DMA in Device mode */
- unsigned descdma : 1;
- } b;
-} dcfg_data_t;
-
-/**
- * This union represents the bit fields in the Device Control
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union dctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Remote Wakeup */
- unsigned rmtwkupsig : 1;
- /** Soft Disconnect */
- unsigned sftdiscon : 1;
- /** Global Non-Periodic IN NAK Status */
- unsigned gnpinnaksts : 1;
- /** Global OUT NAK Status */
- unsigned goutnaksts : 1;
- /** Test Control */
- unsigned tstctl : 3;
- /** Set Global Non-Periodic IN NAK */
- unsigned sgnpinnak : 1;
- /** Clear Global Non-Periodic IN NAK */
- unsigned cgnpinnak : 1;
- /** Set Global OUT NAK */
- unsigned sgoutnak : 1;
- /** Clear Global OUT NAK */
- unsigned cgoutnak : 1;
-
- /** Power-On Programming Done */
- unsigned pwronprgdone : 1;
- /** Global Continue on BNA */
- unsigned gcontbna : 1;
- /** Global Multi Count */
- unsigned gmc : 2;
- /** Ignore Frame Number for ISOC EPs */
- unsigned ifrmnum : 1;
- /** NAK on Babble */
- unsigned nakonbble : 1;
-
- unsigned reserved16_31 : 16;
- } b;
-} dctl_data_t;
-
-/**
- * This union represents the bit fields in the Device Status
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union dsts_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Suspend Status */
- unsigned suspsts : 1;
- /** Enumerated Speed */
- unsigned enumspd : 2;
-#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
-#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
- /** Erratic Error */
- unsigned errticerr : 1;
- unsigned reserved4_7: 4;
- /** Frame or Microframe Number of the received SOF */
- unsigned soffn : 14;
- unsigned reserved22_31 : 10;
- } b;
-} dsts_data_t;
-
-
-/**
- * This union represents the bit fields in the Device IN EP Interrupt
- * Register and the Device IN EP Common Mask Register.
- *
- * - Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union diepint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Transfer complete mask */
- unsigned xfercompl : 1;
- /** Endpoint disable mask */
- unsigned epdisabled : 1;
- /** AHB Error mask */
- unsigned ahberr : 1;
- /** TimeOUT Handshake mask (non-ISOC EPs) */
- unsigned timeout : 1;
- /** IN Token received with TxF Empty mask */
- unsigned intktxfemp : 1;
- /** IN Token Received with EP mismatch mask */
- unsigned intknepmis : 1;
- /** IN Endpoint HAK Effective mask */
- unsigned inepnakeff : 1;
- /** IN Endpoint HAK Effective mask */
- unsigned emptyintr : 1;
-
- unsigned txfifoundrn : 1;
-
- /** BNA Interrupt mask */
- unsigned bna : 1;
-
- unsigned reserved10_12 : 3;
- /** BNA Interrupt mask */
- unsigned nak : 1;
-
- unsigned reserved14_31 : 18;
- } b;
-} diepint_data_t;
-
-/**
- * This union represents the bit fields in the Device IN EP
- * Common/Dedicated Interrupt Mask Register.
- */
-typedef union diepint_data diepmsk_data_t;
-
-/**
- * This union represents the bit fields in the Device OUT EP Interrupt
- * Registerand Device OUT EP Common Interrupt Mask Register.
- *
- * - Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union doepint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Transfer complete */
- unsigned xfercompl : 1;
- /** Endpoint disable */
- unsigned epdisabled : 1;
- /** AHB Error */
- unsigned ahberr : 1;
- /** Setup Phase Done (contorl EPs) */
- unsigned setup : 1;
- /** OUT Token Received when Endpoint Disabled */
- unsigned outtknepdis : 1;
-
- unsigned stsphsercvd : 1;
- /** Back-to-Back SETUP Packets Received */
- unsigned back2backsetup : 1;
-
- unsigned reserved7 : 1;
- /** OUT packet Error */
- unsigned outpkterr : 1;
- /** BNA Interrupt */
- unsigned bna : 1;
-
- unsigned reserved10 : 1;
- /** Packet Drop Status */
- unsigned pktdrpsts : 1;
- /** Babble Interrupt */
- unsigned babble : 1;
- /** NAK Interrupt */
- unsigned nak : 1;
- /** NYET Interrupt */
- unsigned nyet : 1;
-
- unsigned reserved15_31 : 17;
- } b;
-} doepint_data_t;
-
-/**
- * This union represents the bit fields in the Device OUT EP
- * Common/Dedicated Interrupt Mask Register.
- */
-typedef union doepint_data doepmsk_data_t;
-
-/**
- * This union represents the bit fields in the Device All EP Interrupt
- * and Mask Registers.
- * - Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union daint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** IN Endpoint bits */
- unsigned in : 16;
- /** OUT Endpoint bits */
- unsigned out : 16;
- } ep;
- struct
- {
- /** IN Endpoint bits */
- unsigned inep0 : 1;
- unsigned inep1 : 1;
- unsigned inep2 : 1;
- unsigned inep3 : 1;
- unsigned inep4 : 1;
- unsigned inep5 : 1;
- unsigned inep6 : 1;
- unsigned inep7 : 1;
- unsigned inep8 : 1;
- unsigned inep9 : 1;
- unsigned inep10 : 1;
- unsigned inep11 : 1;
- unsigned inep12 : 1;
- unsigned inep13 : 1;
- unsigned inep14 : 1;
- unsigned inep15 : 1;
- /** OUT Endpoint bits */
- unsigned outep0 : 1;
- unsigned outep1 : 1;
- unsigned outep2 : 1;
- unsigned outep3 : 1;
- unsigned outep4 : 1;
- unsigned outep5 : 1;
- unsigned outep6 : 1;
- unsigned outep7 : 1;
- unsigned outep8 : 1;
- unsigned outep9 : 1;
- unsigned outep10 : 1;
- unsigned outep11 : 1;
- unsigned outep12 : 1;
- unsigned outep13 : 1;
- unsigned outep14 : 1;
- unsigned outep15 : 1;
- } b;
-} daint_data_t;
-
-/**
- * This union represents the bit fields in the Device IN Token Queue
- * Read Registers.
- * - Read the register into the <i>d32</i> member.
- * - READ-ONLY Register
- */
-typedef union dtknq1_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** In Token Queue Write Pointer */
- unsigned intknwptr : 5;
- /** Reserved */
- unsigned reserved05_06 : 2;
- /** write pointer has wrapped. */
- unsigned wrap_bit : 1;
- /** EP Numbers of IN Tokens 0 ... 4 */
- unsigned epnums0_5 : 24;
- }b;
-} dtknq1_data_t;
-
-/**
- * This union represents Threshold control Register
- * - Read and write the register into the <i>d32</i> member.
- * - READ-WRITABLE Register
- */
-typedef union dthrctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** non ISO Tx Thr. Enable */
- unsigned non_iso_thr_en : 1;
- /** ISO Tx Thr. Enable */
- unsigned iso_thr_en : 1;
- /** Tx Thr. Length */
- unsigned tx_thr_len : 9;
- /** Reserved */
- unsigned reserved11_15 : 5;
- /** Rx Thr. Enable */
- unsigned rx_thr_en : 1;
- /** Rx Thr. Length */
- unsigned rx_thr_len : 9;
- /** Reserved */
- unsigned reserved26_31 : 6;
- }b;
-} dthrctl_data_t;
-
-
-/**
- * Device Logical IN Endpoint-Specific Registers. <i>Offsets
- * 900h-AFCh</i>
- *
- * There will be one set of endpoint registers per logical endpoint
- * implemented.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_in_ep_regs
-{
- /** Device IN Endpoint Control Register. <i>Offset:900h +
- * (ep_num * 20h) + 00h</i> */
- volatile uint32_t diepctl;
- /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
- uint32_t reserved04;
- /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
- * (ep_num * 20h) + 08h</i> */
- volatile uint32_t diepint;
- /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
- uint32_t reserved0C;
- /** Device IN Endpoint Transfer Size
- * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
- volatile uint32_t dieptsiz;
- /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
- * (ep_num * 20h) + 14h</i> */
- volatile uint32_t diepdma;
- /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
- * (ep_num * 20h) + 18h</i> */
- volatile uint32_t dtxfsts;
- /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
- * (ep_num * 20h) + 1Ch</i> */
- volatile uint32_t diepdmab;
-} dwc_otg_dev_in_ep_regs_t;
-
-/**
- * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
- * B00h-CFCh</i>
- *
- * There will be one set of endpoint registers per logical endpoint
- * implemented.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_out_ep_regs
-{
- /** Device OUT Endpoint Control Register. <i>Offset:B00h +
- * (ep_num * 20h) + 00h</i> */
- volatile uint32_t doepctl;
- /** Device OUT Endpoint Frame number Register. <i>Offset:
- * B00h + (ep_num * 20h) + 04h</i> */
- volatile uint32_t doepfn;
- /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
- * (ep_num * 20h) + 08h</i> */
- volatile uint32_t doepint;
- /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
- uint32_t reserved0C;
- /** Device OUT Endpoint Transfer Size Register. <i>Offset:
- * B00h + (ep_num * 20h) + 10h</i> */
- volatile uint32_t doeptsiz;
- /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
- * + (ep_num * 20h) + 14h</i> */
- volatile uint32_t doepdma;
- /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 1Ch</i> */
- uint32_t unused;
- /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
- * + (ep_num * 20h) + 1Ch</i> */
- uint32_t doepdmab;
-} dwc_otg_dev_out_ep_regs_t;
-
-/**
- * This union represents the bit fields in the Device EP Control
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union depctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Maximum Packet Size
- * IN/OUT EPn
- * IN/OUT EP0 - 2 bits
- * 2'b00: 64 Bytes
- * 2'b01: 32
- * 2'b10: 16
- * 2'b11: 8 */
- unsigned mps : 11;
-#define DWC_DEP0CTL_MPS_64 0
-#define DWC_DEP0CTL_MPS_32 1
-#define DWC_DEP0CTL_MPS_16 2
-#define DWC_DEP0CTL_MPS_8 3
-
- /** Next Endpoint
- * IN EPn/IN EP0
- * OUT EPn/OUT EP0 - reserved */
- unsigned nextep : 4;
-
- /** USB Active Endpoint */
- unsigned usbactep : 1;
-
- /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
- * This field contains the PID of the packet going to
- * be received or transmitted on this endpoint. The
- * application should program the PID of the first
- * packet going to be received or transmitted on this
- * endpoint , after the endpoint is
- * activated. Application use the SetD1PID and
- * SetD0PID fields of this register to program either
- * D0 or D1 PID.
- *
- * The encoding for this field is
- * - 0: D0
- * - 1: D1
- */
- unsigned dpid : 1;
-
- /** NAK Status */
- unsigned naksts : 1;
-
- /** Endpoint Type
- * 2'b00: Control
- * 2'b01: Isochronous
- * 2'b10: Bulk
- * 2'b11: Interrupt */
- unsigned eptype : 2;
-
- /** Snoop Mode
- * OUT EPn/OUT EP0
- * IN EPn/IN EP0 - reserved */
- unsigned snp : 1;
-
- /** Stall Handshake */
- unsigned stall : 1;
-
- /** Tx Fifo Number
- * IN EPn/IN EP0
- * OUT EPn/OUT EP0 - reserved */
- unsigned txfnum : 4;
-
- /** Clear NAK */
- unsigned cnak : 1;
- /** Set NAK */
- unsigned snak : 1;
- /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
- * Writing to this field sets the Endpoint DPID (DPID)
- * field in this register to DATA0. Set Even
- * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
- * Writing to this field sets the Even/Odd
- * (micro)frame (EO_FrNum) field to even (micro)
- * frame.
- */
- unsigned setd0pid : 1;
- /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
- * Writing to this field sets the Endpoint DPID (DPID)
- * field in this register to DATA1 Set Odd
- * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
- * Writing to this field sets the Even/Odd
- * (micro)frame (EO_FrNum) field to odd (micro) frame.
- */
- unsigned setd1pid : 1;
-
- /** Endpoint Disable */
- unsigned epdis : 1;
- /** Endpoint Enable */
- unsigned epena : 1;
- } b;
-} depctl_data_t;
-
-/**
- * This union represents the bit fields in the Device EP Transfer
- * Size Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union deptsiz_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /** Transfer size */
- unsigned xfersize : 19;
- /** Packet Count */
- unsigned pktcnt : 10;
- /** Multi Count - Periodic IN endpoints */
- unsigned mc : 2;
- unsigned reserved : 1;
- } b;
-} deptsiz_data_t;
-
-/**
- * This union represents the bit fields in the Device EP 0 Transfer
- * Size Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union deptsiz0_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /** Transfer size */
- unsigned xfersize : 7;
- /** Reserved */
- unsigned reserved7_18 : 12;
- /** Packet Count */
- unsigned pktcnt : 1;
- /** Reserved */
- unsigned reserved20_28 : 9;
- /**Setup Packet Count (DOEPTSIZ0 Only) */
- unsigned supcnt : 2;
- unsigned reserved31;
- } b;
-} deptsiz0_data_t;
-
-
-/////////////////////////////////////////////////
-// DMA Descriptor Specific Structures
-//
-
-/** Buffer status definitions */
-
-#define BS_HOST_READY 0x0
-#define BS_DMA_BUSY 0x1
-#define BS_DMA_DONE 0x2
-#define BS_HOST_BUSY 0x3
-
-/** Receive/Transmit status definitions */
-
-#define RTS_SUCCESS 0x0
-#define RTS_BUFFLUSH 0x1
-#define RTS_RESERVED 0x2
-#define RTS_BUFERR 0x3
-
-
-/**
- * This union represents the bit fields in the DMA Descriptor
- * status quadlet. Read the quadlet into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
- * <i>b_iso_in</i> elements.
- */
-typedef union desc_sts_data
-{
- /** raw register data */
- uint32_t d32;
- /** quadlet bits */
- struct {
- /** Received number of bytes */
- unsigned bytes : 16;
-
- unsigned reserved16_22 : 7;
- /** Multiple Transfer - only for OUT EPs */
- unsigned mtrf : 1;
- /** Setup Packet received - only for OUT EPs */
- unsigned sr : 1;
- /** Interrupt On Complete */
- unsigned ioc : 1;
- /** Short Packet */
- unsigned sp : 1;
- /** Last */
- unsigned l : 1;
- /** Receive Status */
- unsigned sts : 2;
- /** Buffer Status */
- unsigned bs : 2;
- } b;
-
-#ifdef DWC_EN_ISOC
- /** iso out quadlet bits */
- struct {
- /** Received number of bytes */
- unsigned rxbytes : 11;
-
- unsigned reserved11 : 1;
- /** Frame Number */
- unsigned framenum : 11;
- /** Received ISO Data PID */
- unsigned pid : 2;
- /** Interrupt On Complete */
- unsigned ioc : 1;
- /** Short Packet */
- unsigned sp : 1;
- /** Last */
- unsigned l : 1;
- /** Receive Status */
- unsigned rxsts : 2;
- /** Buffer Status */
- unsigned bs : 2;
- } b_iso_out;
-
- /** iso in quadlet bits */
- struct {
- /** Transmited number of bytes */
- unsigned txbytes : 12;
- /** Frame Number */
- unsigned framenum : 11;
- /** Transmited ISO Data PID */
- unsigned pid : 2;
- /** Interrupt On Complete */
- unsigned ioc : 1;
- /** Short Packet */
- unsigned sp : 1;
- /** Last */
- unsigned l : 1;
- /** Transmit Status */
- unsigned txsts : 2;
- /** Buffer Status */
- unsigned bs : 2;
- } b_iso_in;
-#endif //DWC_EN_ISOC
-} desc_sts_data_t;
-
-/**
- * DMA Descriptor structure
- *
- * DMA Descriptor structure contains two quadlets:
- * Status quadlet and Data buffer pointer.
- */
-typedef struct dwc_otg_dma_desc
-{
- /** DMA Descriptor status quadlet */
- desc_sts_data_t status;
- /** DMA Descriptor data buffer pointer */
- dma_addr_t buf;
-} dwc_otg_dma_desc_t;
-
-/**
- * The dwc_otg_dev_if structure contains information needed to manage
- * the DWC_otg controller acting in device mode. It represents the
- * programming view of the device-specific aspects of the controller.
- */
-typedef struct dwc_otg_dev_if
-{
- /** Pointer to device Global registers.
- * Device Global Registers starting at offset 800h
- */
- dwc_otg_device_global_regs_t *dev_global_regs;
-#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
-
- /**
- * Device Logical IN Endpoint-Specific Registers 900h-AFCh
- */
- dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
-#define DWC_DEV_IN_EP_REG_OFFSET 0x900
-#define DWC_EP_REG_OFFSET 0x20
-
- /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
- dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
-#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
-
- /* Device configuration information*/
- uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
- uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
- uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
-
- /** Size of periodic FIFOs (Bytes) */
- uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
-
- /** Size of Tx FIFOs (Bytes) */
- uint16_t tx_fifo_size[MAX_TX_FIFOS];
-
- /** Thresholding enable flags and length varaiables **/
- uint16_t rx_thr_en;
- uint16_t iso_tx_thr_en;
- uint16_t non_iso_tx_thr_en;
-
- uint16_t rx_thr_length;
- uint16_t tx_thr_length;
-
- /**
- * Pointers to the DMA Descriptors for EP0 Control
- * transfers (virtual and physical)
- */
-
- /** 2 descriptors for SETUP packets */
- uint32_t dma_setup_desc_addr[2];
- dwc_otg_dma_desc_t* setup_desc_addr[2];
-
- /** Pointer to Descriptor with latest SETUP packet */
- dwc_otg_dma_desc_t* psetup;
-
- /** Index of current SETUP handler descriptor */
- uint32_t setup_desc_index;
-
- /** Descriptor for Data In or Status In phases */
- uint32_t dma_in_desc_addr;
- dwc_otg_dma_desc_t* in_desc_addr;;
-
- /** Descriptor for Data Out or Status Out phases */
- uint32_t dma_out_desc_addr;
- dwc_otg_dma_desc_t* out_desc_addr;
-
-} dwc_otg_dev_if_t;
-
-
-
-
-/////////////////////////////////////////////////
-// Host Mode Register Structures
-//
-/**
- * The Host Global Registers structure defines the size and relative
- * field offsets for the Host Mode Global Registers. Host Global
- * Registers offsets 400h-7FFh.
-*/
-typedef struct dwc_otg_host_global_regs
-{
- /** Host Configuration Register. <i>Offset: 400h</i> */
- volatile uint32_t hcfg;
- /** Host Frame Interval Register. <i>Offset: 404h</i> */
- volatile uint32_t hfir;
- /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
- volatile uint32_t hfnum;
- /** Reserved. <i>Offset: 40Ch</i> */
- uint32_t reserved40C;
- /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
- volatile uint32_t hptxsts;
- /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
- volatile uint32_t haint;
- /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
- volatile uint32_t haintmsk;
-} dwc_otg_host_global_regs_t;
-
-/**
- * This union represents the bit fields in the Host Configuration Register.
- * Read the register into the <i>d32</i> member then set/clear the bits using
- * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
- */
-typedef union hcfg_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- /** FS/LS Phy Clock Select */
- unsigned fslspclksel : 2;
-#define DWC_HCFG_30_60_MHZ 0
-#define DWC_HCFG_48_MHZ 1
-#define DWC_HCFG_6_MHZ 2
-
- /** FS/LS Only Support */
- unsigned fslssupp : 1;
- } b;
-} hcfg_data_t;
-
-/**
- * This union represents the bit fields in the Host Frame Remaing/Number
- * Register.
- */
-typedef union hfir_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- unsigned frint : 16;
- unsigned reserved : 16;
- } b;
-} hfir_data_t;
-
-/**
- * This union represents the bit fields in the Host Frame Remaing/Number
- * Register.
- */
-typedef union hfnum_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- unsigned frnum : 16;
-#define DWC_HFNUM_MAX_FRNUM 0x3FFF
- unsigned frrem : 16;
- } b;
-} hfnum_data_t;
-
-typedef union hptxsts_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- unsigned ptxfspcavail : 16;
- unsigned ptxqspcavail : 8;
- /** Top of the Periodic Transmit Request Queue
- * - bit 24 - Terminate (last entry for the selected channel)
- * - bits 26:25 - Token Type
- * - 2'b00 - Zero length
- * - 2'b01 - Ping
- * - 2'b10 - Disable
- * - bits 30:27 - Channel Number
- * - bit 31 - Odd/even microframe
- */
- unsigned ptxqtop_terminate : 1;
- unsigned ptxqtop_token : 2;
- unsigned ptxqtop_chnum : 4;
- unsigned ptxqtop_odd : 1;
- } b;
-} hptxsts_data_t;
-
-/**
- * This union represents the bit fields in the Host Port Control and Status
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hprt0 register.
- */
-typedef union hprt0_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned prtconnsts : 1;
- unsigned prtconndet : 1;
- unsigned prtena : 1;
- unsigned prtenchng : 1;
- unsigned prtovrcurract : 1;
- unsigned prtovrcurrchng : 1;
- unsigned prtres : 1;
- unsigned prtsusp : 1;
- unsigned prtrst : 1;
- unsigned reserved9 : 1;
- unsigned prtlnsts : 2;
- unsigned prtpwr : 1;
- unsigned prttstctl : 4;
- unsigned prtspd : 2;
-#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
-#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
-#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
- unsigned reserved19_31 : 13;
- } b;
-} hprt0_data_t;
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union haint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned ch0 : 1;
- unsigned ch1 : 1;
- unsigned ch2 : 1;
- unsigned ch3 : 1;
- unsigned ch4 : 1;
- unsigned ch5 : 1;
- unsigned ch6 : 1;
- unsigned ch7 : 1;
- unsigned ch8 : 1;
- unsigned ch9 : 1;
- unsigned ch10 : 1;
- unsigned ch11 : 1;
- unsigned ch12 : 1;
- unsigned ch13 : 1;
- unsigned ch14 : 1;
- unsigned ch15 : 1;
- unsigned reserved : 16;
- } b;
-
- struct
- {
- unsigned chint : 16;
- unsigned reserved : 16;
- } b2;
-} haint_data_t;
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union haintmsk_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned ch0 : 1;
- unsigned ch1 : 1;
- unsigned ch2 : 1;
- unsigned ch3 : 1;
- unsigned ch4 : 1;
- unsigned ch5 : 1;
- unsigned ch6 : 1;
- unsigned ch7 : 1;
- unsigned ch8 : 1;
- unsigned ch9 : 1;
- unsigned ch10 : 1;
- unsigned ch11 : 1;
- unsigned ch12 : 1;
- unsigned ch13 : 1;
- unsigned ch14 : 1;
- unsigned ch15 : 1;
- unsigned reserved : 16;
- } b;
-
- struct
- {
- unsigned chint : 16;
- unsigned reserved : 16;
- } b2;
-} haintmsk_data_t;
-
-/**
- * Host Channel Specific Registers. <i>500h-5FCh</i>
- */
-typedef struct dwc_otg_hc_regs
-{
- /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
- volatile uint32_t hcchar;
- /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
- volatile uint32_t hcsplt;
- /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
- volatile uint32_t hcint;
- /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
- volatile uint32_t hcintmsk;
- /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
- volatile uint32_t hctsiz;
- /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
- volatile uint32_t hcdma;
- /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
- uint32_t reserved[2];
-} dwc_otg_hc_regs_t;
-
-/**
- * This union represents the bit fields in the Host Channel Characteristics
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcchar register.
- */
-typedef union hcchar_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- /** Maximum packet size in bytes */
- unsigned mps : 11;
-
- /** Endpoint number */
- unsigned epnum : 4;
-
- /** 0: OUT, 1: IN */
- unsigned epdir : 1;
-
- unsigned reserved : 1;
-
- /** 0: Full/high speed device, 1: Low speed device */
- unsigned lspddev : 1;
-
- /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
- unsigned eptype : 2;
-
- /** Packets per frame for periodic transfers. 0 is reserved. */
- unsigned multicnt : 2;
-
- /** Device address */
- unsigned devaddr : 7;
-
- /**
- * Frame to transmit periodic transaction.
- * 0: even, 1: odd
- */
- unsigned oddfrm : 1;
-
- /** Channel disable */
- unsigned chdis : 1;
-
- /** Channel enable */
- unsigned chen : 1;
- } b;
-} hcchar_data_t;
-
-typedef union hcsplt_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- /** Port Address */
- unsigned prtaddr : 7;
-
- /** Hub Address */
- unsigned hubaddr : 7;
-
- /** Transaction Position */
- unsigned xactpos : 2;
-#define DWC_HCSPLIT_XACTPOS_MID 0
-#define DWC_HCSPLIT_XACTPOS_END 1
-#define DWC_HCSPLIT_XACTPOS_BEGIN 2
-#define DWC_HCSPLIT_XACTPOS_ALL 3
-
- /** Do Complete Split */
- unsigned compsplt : 1;
-
- /** Reserved */
- unsigned reserved : 14;
-
- /** Split Enble */
- unsigned spltena : 1;
- } b;
-} hcsplt_data_t;
-
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union hcint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Transfer Complete */
- unsigned xfercomp : 1;
- /** Channel Halted */
- unsigned chhltd : 1;
- /** AHB Error */
- unsigned ahberr : 1;
- /** STALL Response Received */
- unsigned stall : 1;
- /** NAK Response Received */
- unsigned nak : 1;
- /** ACK Response Received */
- unsigned ack : 1;
- /** NYET Response Received */
- unsigned nyet : 1;
- /** Transaction Err */
- unsigned xacterr : 1;
- /** Babble Error */
- unsigned bblerr : 1;
- /** Frame Overrun */
- unsigned frmovrun : 1;
- /** Data Toggle Error */
- unsigned datatglerr : 1;
- /** Reserved */
- unsigned reserved : 21;
- } b;
-} hcint_data_t;
-
-/**
- * This union represents the bit fields in the Host Channel Transfer Size
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcchar register.
- */
-typedef union hctsiz_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- /** Total transfer size in bytes */
- unsigned xfersize : 19;
-
- /** Data packets to transfer */
- unsigned pktcnt : 10;
-
- /**
- * Packet ID for next data packet
- * 0: DATA0
- * 1: DATA2
- * 2: DATA1
- * 3: MDATA (non-Control), SETUP (Control)
- */
- unsigned pid : 2;
-#define DWC_HCTSIZ_DATA0 0
-#define DWC_HCTSIZ_DATA1 2
-#define DWC_HCTSIZ_DATA2 1
-#define DWC_HCTSIZ_MDATA 3
-#define DWC_HCTSIZ_SETUP 3
-
- /** Do PING protocol when 1 */
- unsigned dopng : 1;
- } b;
-} hctsiz_data_t;
-
-/**
- * This union represents the bit fields in the Host Channel Interrupt Mask
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcintmsk register.
- */
-typedef union hcintmsk_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- unsigned xfercompl : 1;
- unsigned chhltd : 1;
- unsigned ahberr : 1;
- unsigned stall : 1;
- unsigned nak : 1;
- unsigned ack : 1;
- unsigned nyet : 1;
- unsigned xacterr : 1;
- unsigned bblerr : 1;
- unsigned frmovrun : 1;
- unsigned datatglerr : 1;
- unsigned reserved : 21;
- } b;
-} hcintmsk_data_t;
-
-/** OTG Host Interface Structure.
- *
- * The OTG Host Interface Structure structure contains information
- * needed to manage the DWC_otg controller acting in host mode. It
- * represents the programming view of the host-specific aspects of the
- * controller.
- */
-typedef struct dwc_otg_host_if
-{
- /** Host Global Registers starting at offset 400h.*/
- dwc_otg_host_global_regs_t *host_global_regs;
-#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
-
- /** Host Port 0 Control and Status Register */
- volatile uint32_t *hprt0;
-#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
-
-
- /** Host Channel Specific Registers at offsets 500h-5FCh. */
- dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
-#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
-#define DWC_OTG_CHAN_REGS_OFFSET 0x20
-
-
- /* Host configuration information */
- /** Number of Host Channels (range: 1-16) */
- uint8_t num_host_channels;
- /** Periodic EPs supported (0: no, 1: yes) */
- uint8_t perio_eps_supported;
- /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
- uint16_t perio_tx_fifo_size;
-
-} dwc_otg_host_if_t;
-
-
-/**
- * This union represents the bit fields in the Power and Clock Gating Control
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union pcgcctl_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct
- {
- /** Stop Pclk */
- unsigned stoppclk : 1;
- /** Gate Hclk */
- unsigned gatehclk : 1;
- /** Power Clamp */
- unsigned pwrclmp : 1;
- /** Reset Power Down Modules */
- unsigned rstpdwnmodule : 1;
- /** PHY Suspended */
- unsigned physuspended : 1;
-
- unsigned reserved : 27;
- } b;
-} pcgcctl_data_t;
-
-
-#endif
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/linux/dwc_otg_plat.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
deleted file mode 100644
index 618151b42a..0000000000
--- a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $
- * $Revision: 1.2 $
- * $Date: 2008-11-21 05:39:16 $
- * $Change: 1064915 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_OTG_PLAT_H__)
-#define __DWC_OTG_PLAT_H__
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-/**
- * @file
- *
- * This file contains the Platform Specific constants, interfaces
- * (functions and macros) for Linux.
- *
- */
-//#if !defined(__LINUX_ARM_ARCH__)
-//#error "The contents of this file is Linux specific!!!"
-//#endif
-
-/**
- * Reads the content of a register.
- *
- * @param reg address of register to read.
- * @return contents of the register.
- *
-
- * Usage:<br>
- * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
- */
-static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg)
-{
- return readl(reg);
-};
-
-/**
- * Writes a register with a 32 bit value.
- *
- * @param reg address of register to read.
- * @param value to write to _reg.
- *
- * Usage:<br>
- * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
- */
-static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value)
-{
- writel( value, reg );
-};
-
-/**
- * This function modifies bit values in a register. Using the
- * algorithm: (reg_contents & ~clear_mask) | set_mask.
- *
- * @param reg address of register to read.
- * @param clear_mask bit mask to be cleared.
- * @param set_mask bit mask to be set.
- *
- * Usage:<br>
- * <code> // Clear the SOF Interrupt Mask bit and <br>
- * // set the OTG Interrupt mask bit, leaving all others as they were.
- * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
- */
-static __inline__
- void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask)
-{
- writel( (readl(reg) & ~clear_mask) | set_mask, reg );
-};
-
-
-/**
- * Wrapper for the OS micro-second delay function.
- * @param[in] usecs Microseconds of delay
- */
-static __inline__ void UDELAY( const uint32_t usecs )
-{
- udelay( usecs );
-}
-
-/**
- * Wrapper for the OS milli-second delay function.
- * @param[in] msecs milliseconds of delay
- */
-static __inline__ void MDELAY( const uint32_t msecs )
-{
- mdelay( msecs );
-}
-
-/**
- * Wrapper for the Linux spin_lock. On the ARM (Integrator)
- * spin_lock() is a nop.
- *
- * @param lock Pointer to the spinlock.
- */
-static __inline__ void SPIN_LOCK( spinlock_t *lock )
-{
- spin_lock(lock);
-}
-
-/**
- * Wrapper for the Linux spin_unlock. On the ARM (Integrator)
- * spin_lock() is a nop.
- *
- * @param lock Pointer to the spinlock.
- */
-static __inline__ void SPIN_UNLOCK( spinlock_t *lock )
-{
- spin_unlock(lock);
-}
-
-/**
- * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM
- * (Integrator) spin_lock() is a nop.
- *
- * @param l Pointer to the spinlock.
- * @param f unsigned long for irq flags storage.
- */
-#define SPIN_LOCK_IRQSAVE( l, f ) spin_lock_irqsave(l,f);
-
-/**
- * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM
- * (Integrator) spin_lock() is a nop.
- *
- * @param l Pointer to the spinlock.
- * @param f unsigned long for irq flags storage.
- */
-#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f);
-
-/*
- * Debugging support vanishes in non-debug builds.
- */
-
-
-/**
- * The Debug Level bit-mask variable.
- */
-extern uint32_t g_dbg_lvl;
-/**
- * Set the Debug Level variable.
- */
-static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new )
-{
- uint32_t old = g_dbg_lvl;
- g_dbg_lvl = new;
- return old;
-}
-
-/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-#define DBG_CIL (0x2)
-/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
- * messages */
-#define DBG_CILV (0x20)
-/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
- * messages */
-#define DBG_PCD (0x4)
-/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
- * messages */
-#define DBG_PCDV (0x40)
-/** When debug level has the DBG_HCD bit set, display Host debug messages */
-#define DBG_HCD (0x8)
-/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
- * messages */
-#define DBG_HCDV (0x80)
-/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
- * mode. */
-#define DBG_HCD_URB (0x800)
-
-/** When debug level has any bit set, display debug messages */
-#define DBG_ANY (0xFF)
-
-/** All debug messages off */
-#define DBG_OFF 0
-
-/** Prefix string for DWC_DEBUG print macros. */
-#define USB_DWC "dwc_otg: "
-
-/**
- * Print a debug message when the Global debug level variable contains
- * the bit defined in <code>lvl</code>.
- *
- * @param[in] lvl - Debug level, use one of the DBG_ constants above.
- * @param[in] x - like printf
- *
- * Example:<p>
- * <code>
- * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
- * </code>
- * <br>
- * results in:<br>
- * <code>
- * usb-DWC_otg: dwc_otg_cil_init(ca867000)
- * </code>
- */
-#ifdef DEBUG
-
-# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
-# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
-
-# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
-
-#else
-
-# define DWC_DEBUGPL(lvl, x...) do{}while(0)
-# define DWC_DEBUGP(x...)
-
-# define CHK_DEBUG_LEVEL(level) (0)
-
-#endif /*DEBUG*/
-
-/**
- * Print an Error message.
- */
-#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
-/**
- * Print a Warning message.
- */
-#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
-/**
- * Print a notice (normal but significant message).
- */
-#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
-/**
- * Basic message printing.
- */
-#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
-
-#endif
-
diff --git a/target/linux/ramips/files-3.7/drivers/watchdog/ramips_wdt.c b/target/linux/ramips/files-3.7/drivers/watchdog/ramips_wdt.c
deleted file mode 100644
index fa7e9e85ef..0000000000
--- a/target/linux/ramips/files-3.7/drivers/watchdog/ramips_wdt.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Ralink RT288X/RT305X built-in hardware watchdog timer
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This driver was based on: drivers/watchdog/ixp4xx_wdt.c
- * Author: Deepak Saxena <dsaxena@plexity.net>
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * which again was based on sa1100 driver,
- * Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
- *
- * parts of the driver are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/watchdog.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#define DRIVER_NAME "ramips-wdt"
-
-#define RAMIPS_WDT_TIMEOUT 0 /* seconds */
-#define RAMIPS_WDT_PRESCALE 65536
-
-#define TIMER_REG_TMRSTAT 0x00
-#define TIMER_REG_TMR1LOAD 0x20
-#define TIMER_REG_TMR1CTL 0x28
-
-#define TMRSTAT_TMR1RST BIT(5)
-
-#define TMR1CTL_ENABLE BIT(7)
-#define TMR1CTL_MODE_SHIFT 4
-#define TMR1CTL_MODE_MASK 0x3
-#define TMR1CTL_MODE_FREE_RUNNING 0x0
-#define TMR1CTL_MODE_PERIODIC 0x1
-#define TMR1CTL_MODE_TIMEOUT 0x2
-#define TMR1CTL_MODE_WDT 0x3
-#define TMR1CTL_PRESCALE_MASK 0xf
-#define TMR1CTL_PRESCALE_65536 0xf
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
- "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-static int ramips_wdt_timeout = RAMIPS_WDT_TIMEOUT;
-module_param_named(timeout, ramips_wdt_timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, 0 means use maximum "
- "(default=" __MODULE_STRING(RAMIPS_WDT_TIMEOUT) "s)");
-
-static unsigned long ramips_wdt_flags;
-
-#define WDT_FLAGS_BUSY 0
-#define WDT_FLAGS_EXPECT_CLOSE 1
-
-static struct clk *ramips_wdt_clk;
-static unsigned long ramips_wdt_freq;
-static int ramips_wdt_max_timeout;
-static void __iomem *ramips_wdt_base;
-
-static inline void ramips_wdt_wr(unsigned reg, u32 val)
-{
- __raw_writel(val, ramips_wdt_base + reg);
-}
-
-static inline u32 ramips_wdt_rr(unsigned reg)
-{
- return __raw_readl(ramips_wdt_base + reg);
-}
-
-static inline void ramips_wdt_keepalive(void)
-{
- ramips_wdt_wr(TIMER_REG_TMR1LOAD, ramips_wdt_timeout * ramips_wdt_freq);
-}
-
-static inline void ramips_wdt_enable(void)
-{
- u32 t;
-
- ramips_wdt_keepalive();
-
- t = ramips_wdt_rr(TIMER_REG_TMR1CTL);
- t |= TMR1CTL_ENABLE;
- ramips_wdt_wr(TIMER_REG_TMR1CTL, t);
-}
-
-static inline void ramips_wdt_disable(void)
-{
- u32 t;
-
- ramips_wdt_keepalive();
-
- t = ramips_wdt_rr(TIMER_REG_TMR1CTL);
- t &= ~TMR1CTL_ENABLE;
- ramips_wdt_wr(TIMER_REG_TMR1CTL, t);
-}
-
-static int ramips_wdt_set_timeout(int val)
-{
- if (val < 1 || val > ramips_wdt_max_timeout) {
- pr_warn(DRIVER_NAME
- ": timeout value %d must be 0 < timeout <= %d, using %d\n",
- val, ramips_wdt_max_timeout, ramips_wdt_timeout);
- return -EINVAL;
- }
-
- ramips_wdt_timeout = val;
- ramips_wdt_keepalive();
-
- return 0;
-}
-
-static int ramips_wdt_open(struct inode *inode, struct file *file)
-{
- u32 t;
-
- if (test_and_set_bit(WDT_FLAGS_BUSY, &ramips_wdt_flags))
- return -EBUSY;
-
- clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags);
-
- t = ramips_wdt_rr(TIMER_REG_TMR1CTL);
- t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
- TMR1CTL_PRESCALE_MASK);
- t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
- TMR1CTL_PRESCALE_65536);
- ramips_wdt_wr(TIMER_REG_TMR1CTL, t);
-
- ramips_wdt_enable();
-
- return nonseekable_open(inode, file);
-}
-
-static int ramips_wdt_release(struct inode *inode, struct file *file)
-{
- if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags))
- ramips_wdt_disable();
- else {
- pr_crit(DRIVER_NAME ": device closed unexpectedly, "
- "watchdog timer will not stop!\n");
- ramips_wdt_keepalive();
- }
-
- clear_bit(WDT_FLAGS_BUSY, &ramips_wdt_flags);
- clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags);
-
- return 0;
-}
-
-static ssize_t ramips_wdt_write(struct file *file, const char *data,
- size_t len, loff_t *ppos)
-{
- if (len) {
- if (!nowayout) {
- size_t i;
-
- clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags);
-
- for (i = 0; i != len; i++) {
- char c;
-
- if (get_user(c, data + i))
- return -EFAULT;
-
- if (c == 'V')
- set_bit(WDT_FLAGS_EXPECT_CLOSE,
- &ramips_wdt_flags);
- }
- }
-
- ramips_wdt_keepalive();
- }
-
- return len;
-}
-
-static const struct watchdog_info ramips_wdt_info = {
- .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
- .firmware_version = 0,
- .identity = "RAMIPS watchdog",
-};
-
-static long ramips_wdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- int err;
- int t;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- err = copy_to_user(argp, &ramips_wdt_info,
- sizeof(ramips_wdt_info)) ? -EFAULT : 0;
- break;
-
- case WDIOC_GETSTATUS:
- err = put_user(0, p);
- break;
-
- case WDIOC_KEEPALIVE:
- ramips_wdt_keepalive();
- err = 0;
- break;
-
- case WDIOC_SETTIMEOUT:
- err = get_user(t, p);
- if (err)
- break;
-
- err = ramips_wdt_set_timeout(t);
- if (err)
- break;
-
- /* fallthrough */
- case WDIOC_GETTIMEOUT:
- err = put_user(ramips_wdt_timeout, p);
- break;
-
- default:
- err = -ENOTTY;
- break;
- }
-
- return err;
-}
-
-static const struct file_operations ramips_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = ramips_wdt_write,
- .unlocked_ioctl = ramips_wdt_ioctl,
- .open = ramips_wdt_open,
- .release = ramips_wdt_release,
-};
-
-static struct miscdevice ramips_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &ramips_wdt_fops,
-};
-
-static int ramips_wdt_probe(struct platform_device *pdev)
-{
- struct resource *res;
- int err;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no memory resource found\n");
- return -EINVAL;
- }
-
- ramips_wdt_base = ioremap(res->start, resource_size(res));
- if (!ramips_wdt_base)
- return -ENOMEM;
-
- ramips_wdt_clk = clk_get(&pdev->dev, "wdt");
- if (IS_ERR(ramips_wdt_clk)) {
- err = PTR_ERR(ramips_wdt_clk);
- goto err_unmap;
- }
-
- err = clk_enable(ramips_wdt_clk);
- if (err)
- goto err_clk_put;
-
- ramips_wdt_freq = clk_get_rate(ramips_wdt_clk) / RAMIPS_WDT_PRESCALE;
- if (!ramips_wdt_freq) {
- err = -EINVAL;
- goto err_clk_disable;
- }
-
- ramips_wdt_max_timeout = (0xfffful / ramips_wdt_freq);
- if (ramips_wdt_timeout < 1 ||
- ramips_wdt_timeout > ramips_wdt_max_timeout) {
- ramips_wdt_timeout = ramips_wdt_max_timeout;
- dev_info(&pdev->dev,
- "timeout value must be 0 < timeout <= %d, using %d\n",
- ramips_wdt_max_timeout, ramips_wdt_timeout);
- }
-
- err = misc_register(&ramips_wdt_miscdev);
- if (err) {
- dev_err(&pdev->dev,
- "unable to register misc device, err=%d\n", err);
- goto err_clk_disable;
- }
-
- return 0;
-
-err_clk_disable:
- clk_disable(ramips_wdt_clk);
-err_clk_put:
- clk_put(ramips_wdt_clk);
-err_unmap:
- iounmap(ramips_wdt_base);
- return err;
-}
-
-static int ramips_wdt_remove(struct platform_device *pdev)
-{
- misc_deregister(&ramips_wdt_miscdev);
- clk_disable(ramips_wdt_clk);
- clk_put(ramips_wdt_clk);
- iounmap(ramips_wdt_base);
- return 0;
-}
-
-static void ramips_wdt_shutdown(struct platform_device *pdev)
-{
- ramips_wdt_disable();
-}
-
-static struct platform_driver ramips_wdt_driver = {
- .remove = ramips_wdt_remove,
- .shutdown = ramips_wdt_shutdown,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init ramips_wdt_init(void)
-{
- return platform_driver_probe(&ramips_wdt_driver, ramips_wdt_probe);
-}
-module_init(ramips_wdt_init);
-
-static void __exit ramips_wdt_exit(void)
-{
- platform_driver_unregister(&ramips_wdt_driver);
-}
-module_exit(ramips_wdt_exit);
-
-MODULE_DESCRIPTION("Ralink RT288X/RT305X hardware watchdog driver");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/ramips/patches-3.7/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-3.7/001-mips-add-cp0-compare-irq-function.patch
deleted file mode 100644
index 41e5e8e212..0000000000
--- a/target/linux/ramips/patches-3.7/001-mips-add-cp0-compare-irq-function.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -54,6 +54,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
-
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1598,6 +1599,8 @@ void __cpuinit per_cpu_trap_init(bool is
- if (cpu_has_mips_r2) {
- cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+ if (get_c0_compare_irq)
-+ cp0_compare_irq = get_c0_compare_irq();
- cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
- */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
-
diff --git a/target/linux/ramips/patches-3.7/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-3.7/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
deleted file mode 100644
index bf076fe2ec..0000000000
--- a/target/linux/ramips/patches-3.7/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1927,7 +1927,7 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-+ if (chip_good(map, adr, map_word_ff(map)))
- break;
-
- if (time_after(jiffies, timeo)) {
-@@ -2016,7 +2016,7 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
- break;
- }
diff --git a/target/linux/ramips/patches-3.7/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-3.7/011-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index 5f9df144f9..0000000000
--- a/target/linux/ramips/patches-3.7/011-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -50,7 +50,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
- mtd->_write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1443,6 +1447,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1555,7 +1560,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1630,6 +1634,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-3.7/100-mips-ralink-core.patch b/target/linux/ramips/patches-3.7/100-mips-ralink-core.patch
deleted file mode 100644
index cfca52b5d7..0000000000
--- a/target/linux/ramips/patches-3.7/100-mips-ralink-core.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -103,6 +103,9 @@ config ATH79
- help
- Support for the Atheros AR71XX/AR724X/AR913X SoCs.
-
-+config MIPS_RALINK
-+ bool "Ralink MIPS SoC based boards"
-+
- config BCM47XX
- bool "Broadcom BCM47XX based boards"
- select CEVT_R4K
-@@ -864,6 +867,7 @@ source "arch/mips/jz4740/Kconfig"
- source "arch/mips/lantiq/Kconfig"
- source "arch/mips/lasat/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-+source "arch/mips/ralink/Kconfig"
- source "arch/mips/powertv/Kconfig"
- source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
-@@ -1206,7 +1210,7 @@ config BOOT_ELF32
-
- config MIPS_L1_CACHE_SHIFT
- int
-- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
-+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
- default "6" if MIPS_CPU_SCACHE
- default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- default "5"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -22,6 +22,7 @@ platforms += pmc-sierra
- platforms += pnx833x
- platforms += pnx8550
- platforms += powertv
-+platforms += ralink
- platforms += rb532
- platforms += sgi-ip22
- platforms += sgi-ip27
diff --git a/target/linux/ramips/patches-3.7/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-3.7/101-rt288x_serial_driver_hack.patch
deleted file mode 100644
index 4269e86acb..0000000000
--- a/target/linux/ramips/patches-3.7/101-rt288x_serial_driver_hack.patch
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/drivers/tty/serial/8250/Kconfig
-+++ b/drivers/tty/serial/8250/Kconfig
-@@ -249,6 +249,14 @@ config SERIAL_8250_ACORN
- system, say Y to this option. The driver can handle 1, 2, or 3 port
- cards. If unsure, say N.
-
-+config SERIAL_8250_RT288X
-+ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
-+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+ help
-+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
-+ serial port, say Y to this option. The driver can handle up to 2 serial
-+ ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- bool "Support for MIPS RM9xxx integrated serial port"
- depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -132,7 +132,7 @@ struct uart_port {
- #define UPIO_HUB6 (1)
- #define UPIO_MEM (2)
- #define UPIO_MEM32 (3)
--#define UPIO_AU (4) /* Au1x00 type IO */
-+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
- #define UPIO_RM9000 (6) /* RM9000 type IO */
-
---- a/drivers/tty/serial/8250/8250.c
-+++ b/drivers/tty/serial/8250/8250.c
-@@ -314,9 +314,9 @@ static void default_serial_dl_write(stru
- serial_out(up, UART_DLM, value >> 8 & 0xff);
- }
-
--#ifdef CONFIG_MIPS_ALCHEMY
-+#if defined CONFIG_MIPS_ALCHEMY || defined (CONFIG_SERIAL_8250_RT288X)
-
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- [UART_RX] = 0,
- [UART_IER] = 2,
-@@ -495,7 +495,7 @@ static void set_io_from_upio(struct uart
- break;
- #endif
-
--#ifdef CONFIG_MIPS_ALCHEMY
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
- case UPIO_AU:
- p->serial_in = au_serial_in;
- p->serial_out = au_serial_out;
-@@ -707,22 +707,19 @@ static int size_fifo(struct uart_8250_po
- */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
-- unsigned char old_dll, old_dlm, old_lcr;
-+ unsigned char old_lcr;
-+ unsigned int old_dl;
- unsigned int id;
-
- old_lcr = serial_in(p, UART_LCR);
- serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
-
-- old_dll = serial_in(p, UART_DLL);
-- old_dlm = serial_in(p, UART_DLM);
-+ old_dl = serial_dl_read(p);
-
-- serial_out(p, UART_DLL, 0);
-- serial_out(p, UART_DLM, 0);
-+ serial_dl_write(p, 0);
-+ id = serial_dl_read(p);
-
-- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
--
-- serial_out(p, UART_DLL, old_dll);
-- serial_out(p, UART_DLM, old_dlm);
-+ serial_dl_write(p, old_dl);
- serial_out(p, UART_LCR, old_lcr);
-
- return id;
-@@ -848,7 +845,7 @@ static int broken_efr(struct uart_8250_p
- /*
- * Exar ST16C2550 "A2" devices incorrectly detect as
- * having an EFR, and report an ID of 0x0201. See
-- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
-+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
- */
- if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
- return 1;
diff --git a/target/linux/ramips/patches-3.7/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-3.7/102-rt288x-pci-driver-hook.patch
deleted file mode 100644
index a76603f144..0000000000
--- a/target/linux/ramips/patches-3.7/102-rt288x-pci-driver-hook.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
-+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ramips/patches-3.7/103-ethernet.patch b/target/linux/ramips/patches-3.7/103-ethernet.patch
deleted file mode 100644
index 5909cf28e1..0000000000
--- a/target/linux/ramips/patches-3.7/103-ethernet.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/racal/Kconfig"
-+source "drivers/net/ethernet/ramips/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
-+obj-$(CONFIG_NET_RAMIPS) += ramips/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
diff --git a/target/linux/ramips/patches-3.7/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-3.7/104-ramips-watchdog-driver.patch
deleted file mode 100644
index a7df80b804..0000000000
--- a/target/linux/ramips/patches-3.7/104-ramips-watchdog-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1064,6 +1064,13 @@ config LANTIQ_WDT
- help
- Hardware driver for the Lantiq SoC Watchdog Timer.
-
-+config RAMIPS_WDT
-+ tristate "Ralink RT288X/RT305X Watchdog Timer"
-+ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+ help
-+ Hardware driver for the built-in watchdog timer on the
-+ Ralink RT288X/RT305X SoCs.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
-+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
-
- # PARISC Architecture
-
diff --git a/target/linux/ramips/patches-3.7/105-ramips-spi-driver.patch b/target/linux/ramips/patches-3.7/105-ramips-spi-driver.patch
deleted file mode 100644
index 5c46956175..0000000000
--- a/target/linux/ramips/patches-3.7/105-ramips-spi-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -317,6 +317,12 @@ config SPI_RSPI
- help
- SPI driver for Renesas RSPI blocks.
-
-+config SPI_RAMIPS
-+ tristate "Ralink RT288x/RT305x/RT3662 SPI Controller"
-+ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+ help
-+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
- obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_RAMIPS) += spi-ramips.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
diff --git a/target/linux/ramips/patches-3.7/105-usb_dwc_otg.patch b/target/linux/ramips/patches-3.7/105-usb_dwc_otg.patch
deleted file mode 100644
index 9f32893c66..0000000000
--- a/target/linux/ramips/patches-3.7/105-usb_dwc_otg.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -187,4 +187,6 @@ source "drivers/usb/gadget/Kconfig"
-
- source "drivers/usb/otg/Kconfig"
-
-+source "drivers/usb/dwc_otg/Kconfig"
-+
- endif # USB_SUPPORT
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -52,6 +52,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early
- obj-$(CONFIG_USB_ATM) += atm/
- obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
-
-+obj-$(CONFIG_DWC_OTG) += dwc_otg/
-+
- obj-$(CONFIG_USB_MUSB_HDRC) += musb/
- obj-$(CONFIG_USB_CHIPIDEA) += chipidea/
- obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
diff --git a/target/linux/ramips/patches-3.7/106-rt3883-pci-support.patch b/target/linux/ramips/patches-3.7/106-rt3883-pci-support.patch
deleted file mode 100644
index 9f5ef9f73f..0000000000
--- a/target/linux/ramips/patches-3.7/106-rt3883-pci-support.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchem
- obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
- obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
-+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ramips/patches-3.7/a01-revert-ehci-port_power_off-removal.patch b/target/linux/ramips/patches-3.7/a01-revert-ehci-port_power_off-removal.patch
deleted file mode 100644
index c4d12f13d5..0000000000
--- a/target/linux/ramips/patches-3.7/a01-revert-ehci-port_power_off-removal.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-reverted:
---- a/arch/mips/ralink/rt3883/devices.c
-+++ b/arch/mips/ralink/rt3883/devices.c
-@@ -177,6 +177,7 @@ static void rt3883_usb_power_off(struct
- }
-
- static struct usb_ehci_pdata rt3883_ehci_data = {
-+ .port_power_off = 1,
- .power_on = rt3883_usb_power_on,
- .power_off = rt3883_usb_power_off,
- };
---- a/arch/mips/ralink/rt305x/devices.c
-+++ b/arch/mips/ralink/rt305x/devices.c
-@@ -356,6 +356,7 @@ static void rt3352_usb_power_off(struct
- }
-
- static struct usb_ehci_pdata rt3352_ehci_data = {
-+ .port_power_off = 1,
- .power_on = rt3352_usb_power_on,
- .power_off = rt3352_usb_power_off,
- };
diff --git a/target/linux/ramips/rt288x/config-3.7 b/target/linux/ramips/rt288x/config-3.7
deleted file mode 100644
index 2dfdc783cb..0000000000
--- a/target/linux/ramips/rt288x/config-3.7
+++ /dev/null
@@ -1,134 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MIPS_RALINK=y
-# CONFIG_MIPS_SEAD3 is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RAMIPS=y
-# CONFIG_NET_RAMIPS_DEBUG is not set
-# CONFIG_NET_RAMIPS_DEBUG_FS is not set
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-CONFIG_RALINK_RT288X=y
-# CONFIG_RALINK_RT305X is not set
-# CONFIG_RALINK_RT3883 is not set
-CONFIG_RAMIPS_WDT=y
-CONFIG_RT288X_MACH_BR6524N=y
-CONFIG_RT288X_MACH_F5D8235_V1=y
-CONFIG_RT288X_MACH_RT_N15=y
-CONFIG_RT288X_MACH_V11ST_FE=y
-CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
-CONFIG_RT288X_MACH_WZR_AGL300NH=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT288X=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.7 b/target/linux/ramips/rt305x/config-3.7
deleted file mode 100644
index 2c2ca0062a..0000000000
--- a/target/linux/ramips/rt305x/config-3.7
+++ /dev/null
@@ -1,168 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DWC_OTG is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MIPS_RALINK=y
-# CONFIG_MIPS_SEAD3 is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RAMIPS=y
-# CONFIG_NET_RAMIPS_DEBUG is not set
-# CONFIG_NET_RAMIPS_DEBUG_FS is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-# CONFIG_RALINK_RT288X is not set
-CONFIG_RALINK_RT305X=y
-# CONFIG_RALINK_RT3883 is not set
-CONFIG_RAMIPS_WDT=y
-CONFIG_RT305X_MACH_3G300M=y
-CONFIG_RT305X_MACH_3G_6200N=y
-CONFIG_RT305X_MACH_AIR3GII=y
-CONFIG_RT305X_MACH_ALL0256N=y
-CONFIG_RT305X_MACH_ALL5002=y
-CONFIG_RT305X_MACH_ARGUS_ATP52B=y
-CONFIG_RT305X_MACH_BC2=y
-CONFIG_RT305X_MACH_BR6425=y
-CONFIG_RT305X_MACH_BROADWAY=y
-CONFIG_RT305X_MACH_CARAMBOLA=y
-CONFIG_RT305X_MACH_DAP_1350=y
-CONFIG_RT305X_MACH_DIR_300_REVB=y
-CONFIG_RT305X_MACH_DIR_615_H1=y
-CONFIG_RT305X_MACH_ESR_9753=y
-CONFIG_RT305X_MACH_F5D8235_V2=y
-CONFIG_RT305X_MACH_FONERA20N=y
-CONFIG_RT305X_MACH_FREESTATION5=y
-CONFIG_RT305X_MACH_HW550_3G=y
-CONFIG_RT305X_MACH_MOFI3500_3GN=y
-CONFIG_RT305X_MACH_MZKW300NH2=y
-CONFIG_RT305X_MACH_NBG_419N=y
-CONFIG_RT305X_MACH_NW718=y
-CONFIG_RT305X_MACH_OMNI_EMB=y
-CONFIG_RT305X_MACH_PSR_680W=y
-CONFIG_RT305X_MACH_PWH2004=y
-CONFIG_RT305X_MACH_RT_G32_REVB=y
-CONFIG_RT305X_MACH_RT_N10_PLUS=y
-CONFIG_RT305X_MACH_RT_N13U=y
-CONFIG_RT305X_MACH_SL_R7205=y
-CONFIG_RT305X_MACH_UR_326N4G=y
-CONFIG_RT305X_MACH_UR_336UN=y
-CONFIG_RT305X_MACH_V22RW_2X2=y
-CONFIG_RT305X_MACH_W306R_V20=y
-CONFIG_RT305X_MACH_W502U=y
-CONFIG_RT305X_MACH_WCR150GN=y
-CONFIG_RT305X_MACH_WHR_G300N=y
-CONFIG_RT305X_MACH_WL341V3=y
-CONFIG_RT305X_MACH_WL351=y
-CONFIG_RT305X_MACH_WL_330N=y
-CONFIG_RT305X_MACH_WL_330N3G=y
-CONFIG_RT305X_MACH_WR512_3GN=y
-CONFIG_RT305X_MACH_WR6202=y
-CONFIG_RT305X_MACH_XDX_RN502J=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT305X=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RAMIPS=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt3883/config-3.7 b/target/linux/ramips/rt3883/config-3.7
deleted file mode 100644
index 8076397890..0000000000
--- a/target/linux/ramips/rt3883/config-3.7
+++ /dev/null
@@ -1,141 +0,0 @@
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MIPS_RALINK=y
-# CONFIG_MIPS_SEAD3 is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RAMIPS=y
-# CONFIG_NET_RAMIPS_DEBUG is not set
-# CONFIG_NET_RAMIPS_DEBUG_FS is not set
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-# CONFIG_RALINK_RT288X is not set
-# CONFIG_RALINK_RT305X is not set
-CONFIG_RALINK_RT3883=y
-CONFIG_RAMIPS_WDT=y
-CONFIG_RT3883_MACH_DIR_645=y
-CONFIG_RT3883_MACH_OMNI_EMB_HPM=y
-CONFIG_RT3883_MACH_RT_N56U=y
-CONFIG_RT3883_MACH_TEW_691GR=y
-CONFIG_RT3883_MACH_TEW_692GR=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367B_PHY=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT3883=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RAMIPS=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0